Laserfiche WebLink
1. Definitions <br />3. Restrictions <br />Master Pole Attachment Agreement <br />APPENDIX D <br />MAKE READY WORK <br />Make Ready Work Work required to provide attachment space on City poles for <br />communication facilities. <br />2. Procedure <br />a. Company shall submit a proposed route for City review. <br />b. If City review shows a need for Make Ready work in order to provide space <br />on pole(s) for company's use, City shall prepare an estimate of City's cost to <br />perform Make Ready work and submit the estimate to Company for their <br />approval prior to start of any Make Ready work. <br />Nothing in this addendum shall prohibit Company from proposing alternate routes <br />to avoid make ready work. <br />City shall not install cross arms to provide space for communications. City shall <br />not replace poles to provide space for communications except under the following <br />conditions: <br />a. The pole in question does not meet current standards for height. <br />b. If the pole in question must be replaced due to poor condition, then <br />replacement with a standard height pole will be at City's expense. If the pole <br />is not in condition to warrant replacement, then replacement with a standard <br />height pole will be at Company's expense. <br />c. The new pole cannot be taller than a replacement pole would be if increased <br />communication space were not a factor in calculating the pole height. <br />City shall be solely responsible for determining height standards and condition of <br />poles. <br />This addendum does not apply to make ready work that must be performed by <br />other entities that may be attached to the pole(s). Arrangements for that work shall <br />be the responsibility of Company. <br />D1 <br />