Laserfiche WebLink
Draft Chapter 18.28 Tukwila Urban Center (TUC) District <br />c. Notch <br />The width of a fagade notch shall be a minimum of five percent of the width of the largest adjacent <br />horizontal fagade segment. The depth of the notch shall be at least 1/4 of the notch width. <br />Figure 26 Facade Notch <br />IE:1M.NVIRMs W a1 1 1100. 1 1 Di':r NUT lDim <br />A. Shopfront Standards <br />i <br />width <br />3 <br />1. The Shopfront Frontage Type defines the primary treatment for ground -level commercial uses <br />oriented to display and access directly from the sidewalk. Shopfronts are built up to the back of the <br />sidewalk, and any setback areas must be treated as extensions of the sidewalk space. Close <br />proximity to high volumes of pedestrian traffic make attention to craft and visual interest within <br />the storefront fagade important. <br />2. Shopfront treatment is required by Corridor Type, see Figures 3 -10. <br />3. Each Shopfront tenant space must contain at least one primary building entrance. Entrances are <br />constructed at sidewalk grade (see the Southcenter Architectural Design Manual for additional <br />standards and guidelines for entrances). <br />4. Transparency. The shopfront shall have clear glass windows framed within storefront pilasters and <br />ZADCD n Clerk's \PC Laserfiche Packet \5 -24 -12 PC Packet \FINAL PC BOOK2_5.18.12_clean.docx Page 43 5/18/2012 <br />55 <br />