HomeMy WebLinkAboutPermit M02-013 - LABELLARTE RESIDENCE - LOT 1CBI - LOT C
4808 S RYAN WY
M02 -013
Parcel No.: 5476800271
Address: 4808 S RYAN WY TUKW
Suite No:
Value of Construction:
Type of Fire Protection:
Permit Center Authorized Signature:
Signature:
Print Name:
doc: Mech
City of Tukwila
Department of Community Development / 6300 Southcenter BL, Suite 100 / Tukwila, WA 98188 / (206) 431 -3670
Tenant:
Name: LABELLARTE RESIDENCE - LOT 1
Address: 4808 S RYAN WY, TUKWILA, WA
Owner:
Name: LABELLARTE PAUL Phone:
Address: 4819 49 AV SW, SEATTLE WA
Contact Person:
Name: MARK TRAVERS Phone: 206 - 763 -8496
Address: 2315 E PIKE ST, SEATTLE WA
Contractor:
Name: COLUMBIA BUILDERS INC Phone: 206 938 -2637
Address: 4819 49TH AVENUE SW, SEATTLE, WA
Contractor License No: COLUMBI033LL Expiration Date: 05/22/2003
DESCRIPTION OF WORK:
INSTALL CENTRAL FORCED AIR FURNACE AND DUCTS IN NEW SINGLE FAMILY RESIDENCE.
$ 5,000.00
N/A
I hereby certify that I have read and examined this permit and know the same to be true and correct. All provisions of law and
ordinances governing this work will be complied with, whether specified herein or not.
The granting of this permit • • - not presume to give authority to violate or cancel the provisions of any other state or local laws
regulating tion .r r�`•erfo • ance of work. I am authorized to sign and obtain this mechanical permit.
Date: — 7�
u r_ Zri 8GLLA2
MECHANICAL PERMIT
Permit Number: MO2 -013
Issue Date: 05/30/2002
Permit Expires On: 11/26/2002
Fees Collected:
Uniform Mechnical Code Edition:
$70.25
1997
a.- .��. -! 1 Date:
This permit shall become null and void if the work is not commenced within 180 days from the date of issuance, or if the work is
suspended or abandoned for a period of 180 days from the last inspection.
MO2 -013
Printed: 05 -30 -2002
tY
V
WO
g
tO
uj
mt
V 0
O 1
= W
1— V
O
tii
O
z
I
City of Tukwila
Department of Community Development / 6300 Southcenter BL, Suite 100 / Tukwila, WA 98188 / (206) 431 -3670
Parcel No.: 5476800271
Address: 4808 S RYAN WY TUKW
Suite No:
Tenant: LABELLARTE RESIDENCE - LOT 1
1: ** *BUILDING DEPARTMENT * **
2: No changes will be made to the plans unless approved by the Engineer and the Tukwila Building Division.
3: Plumbing permits shall be obtained through the Seattle -King County Department of Public Health. Plumbing will be inspected by
that agency, including all gas
piping (296- 4722).
4: Electrical permits shall be obtained through the Washington State Division of Labor and Industries and all electrical work will be
inspected by that agency
(206- 835 - 1111).
5: All permits, inspection records, and approved plans shall be available at the job site prior to the start of any construction. These
documents are to be
maintained and available until final inspection approval is granted.
6: Any exposed insulations backing material shall have a Flame Spread Rating of 25 or Tess, and material shall bear identification
showing the fire performance
rating thereof.
7: All construction to be done in conformance with approved plans and requirements of the Uniform Building Code (1997 Edition) as
amended, Uniform Mechanical Code
(1997 Edition), and Washington State Energy Code (1997 Edition).
8: Validity of Permit. The issuance of a permit or approval of plans, specifications, and computations shall not be construed to be a
permit for, or an approval
of, any violation of any of the provisions of the building code or of any other ordinance of the jurisdiction. No permit presuming to
give authority to violate
or cancel the provisions of this code shall be valid.
9: Manufacturers installation instructions required on site for the building inspectors review.
10: Fuel burning appliances may not be installed in sleeping rooms, U.M.C. 304.5.
11: Appliances which generate flame, spark or glowing ignition, shall be elevated 18 inches above the floor (U.M.C. 303.1.3.).
12: Water heater shall be anchored to resist earthquake (U.P.C. 510.5).
I hereby certify that I have read these conditions and will comply with them as outlined. All provisions of law and ordinances
governing this work will be complied with, whether specified herein or not.
The granting of this permit does not presume to give authority to violate or cancel the provision of any other work or local laws
regulating construction or the performance of work.
Signature:
Print Name: 0 4='c I---- 4 6
doc: Conditions
PERMIT CONDITIONS
MO2 -013
Permit Number: MO2 -013
Status: ISSUED
Applied Date: 01/22/2002
Issue Date: 05/30/2002
Date: `> ' 1) - v l�
Printed: 05 -30 -2002
Project Name/Tenant: - o t) (l,q. C p I - Lo - ! - �
l• f,
Value of M_ hanical Equipment:
Site Address : City State/Zip:
' t 1 , - t 0 I ( U.4
Tax Par I Number:ern
5410 eo -- ' 4 0 -a 6
e '
Property Owner: . /
i / i -1 . / LAT3VI -t q�L�"
Phone: )
t 2e�i i; S 21037
Street Address: 4611 iefi 44 ) ' to / Se 'te / ty,StaR�Z % y
Fax #: ( )
Contractor:
DWMc'YL GORY rtl-krfraY ..
Phone: (
Street Address: City State/Zip:
Fax #: ( )
Contact Person: " i- J
Phone: (143) .,7 b3 849 (o
Street Address: Ci Sta te /Zip: 8 �
'1�i1 * 1✓ p1 ✓v Gam-", . .�4- -L r t- -, WA- ,�?'tz
Fax #: ( 1-a9 )
32-43 32-
' S '
�'. , �lNGi- �
'I . t : f .. li. ' h 0 F iF 19- �k } f ` f�.Cnh
ERr�OR�ii'U!TH ED" GE .. ��:��.:�':r. a }; IE ��.�� :fh't`�'�., �rtf�rt rj�4 +; ;�� �°[�i`�:':�dt��#"?" 'fir
v'J S sl I I .1 .1 I .t '1'-
.!!k ' 4 : �wHY' 1' ' i � ' A
',-
a k f{; 4
�!.�uw�l;i�'�;�"�� H.�' rM�����JJ � ;:�t'
Signature:
1. � T „
t 1 ��,-(pa.....
,t om' d � , 't,.,� - J v
Date: IZ/ /
Print name:
✓1 -✓E�
- �,S
Phone: (1* )7 60 04
Fax #: ( I t & 3145 ;;. 23 ty
r i.
1 e (mil 57-” .
City/ State/Zip: , 0) . 1 _ 11 . 7 .- 1. .- .: ` it JA, Q8 I v2
CITY OF T 'KWI LA
Permit Center
6300 Southcenter Boulevard, Suite 100
Tukwila, WA 98188
(206) 431 -3670
Mechanical Permit Application
Application and plans must be complete in order to be accepted for plan review.
Applications will not be accepted through the mail or facsimile.
4;.� ,� ahkNi41 Hg�" 7 :Ii. 611 }u, .i� Y '. ,ry: 1 RfV�lY : ry.: I. f:H: - 9H. +;Y I;. :f: L'' �h "1i. :'P•:F� ", 2' .ah,.� :.m Limv::a "' a'I ; sgws�y
kFJ� EEVIi:�A�x I�Ib:APF!Itd 1Lh.R�Q ESTED (TO "hEk�CE��O�IT,'Bl�'APP,LIGAN
r.lrrr� 11:1,1.
J�I�Gkr
Description of work to be done (please be specific):
I N 61 i1v c-o r c RA/ At rL ro - t b.Nb u or c
ti e
Current copy of Washington State Department of Labor and Industries Valid Contractor's License. If not available at the time of
application, a copy of this license will be required before the permit is issued OR submit Form H-4, "Affidavit in Lieu of Contractor
Registration ".
Building Owner /Authorized Agent: If the applicant is other than the owner, registered architect/engineer, or contractor licensed by the
State of Washington, a notarized letter from the property owner authorizing the agent to submit this permit application and obtain the
permit will be required as part of this submittal.
I HEREBY CERTIFY THAT I HAVE READ AND EXAMINED THIS APPLICATION AND KNOW THE SAME TO BE TRUE UNDER
PENALTY OF PERJURY BY THE LAWS OF THE STATE OF WASHINGTON, AND I AM AUTHORIZED TQAPPLY FOR THIS PERMIT.
Expiration of Plan Review - Applications for which no permit is issued within 180 days following the date of application shall expire by
limitation. The building official may extend the time for action by the applicant for a period not exceeding 180 days upon written
request by the applicant as defined in Section 114.4 of the Uniform Mechanical Code (current edition). No application shall be
extended more than once.
Date application accepted:
Date application expires:
Application taken by: (initials)
11/2/99
mech permIl.doc
✓
Submittal Requirements
Floor plan and system layout
Roogio lan required to identify individual equipment and the location of each installation (Uniform
MMIt'agical Code 504 (e)) �, �,.t•.'
Details and elevations (for roof mounted equipment) and proposed screening
Heat Loss Calculations or Washington State Energy Code Form #H -7
H.V.A.C. over 2,000 CFM (approximately 5 ton and larger) must be provided with smoke detection shut-
off and will be routed to the Fire Prevention division for additional comments (Uniform Mechanical
Code 1009).
Specifications must be provided to show that replacement equipment complies with the efficiency ratings
and other applicable requirements of the Washington State Nonresidential Energy Code.
Structural engineer's analysis is required for new and the replacement of existing roof equipment
weighing 400 pounds and greater (Uniform Building Code 1632.1). Structural documentation shall be
stamped by a Washington State licensed Structural Engineer.
11/2/99
miscpiu.doc
Mechanical Permits
COMMERCIAL: Two complete sets of drawings and attachments required with application submittal
NOTE: Water heaters and vents are included in the Uniform Mechanical Code — please include any water
heaters or vents being installed or replaced.
RESIDENTIAL: Two complete sets of attachments required with application submittal
Submittal Requirements
New Single Family Residence
Heat Toss calculations or Form H -6.
Equipment specifications.
Change - out or replacement of existing mechanical equipment
1 Narrative of work to be done, including modification to duct work.
Installation of Gas Fireplace
NOTE: Water heaters and vents are included in the Uniform Mechanical Code — please include any water
heaters or vents being installed or replaced.
Narrative with specification of equipment and chimney type.
If using existing chimney, provide a letter by a certified chimney sweep stating that the chimney is in safe
condition.
TRANSACTION LIST:
ACCOUNT ITEM LIST:
doc: Receipt
Aw
City of Tukwila
6300 Southcenter BL, Suite 100 / Tukwila, WA 98188 / (206) 431 -3670
Payee: COLUMBIA BUILDERS
Current Pmts
Amount
Payment Check 4606
MECHANICAL - RES
PLAN CHECK - RES
RECEIPT
Parcel No.: 5476800271 Permit Number: MO2 -013
Address: 4808 S RYAN WY TUKW Status: APPROVED
Suite No: Applied Date: 01/22/2002
Applicant: LABELLARTE RESIDENCE - LOT 1 Issue Date:
Receipt No.: R020000719 Payment Amount: 70.25
Initials: SKS Payment Date: 05/30/2002 01:46 PM
User ID: 1165 Balance: $0.00
Type Method Description
70.25
Description Account Code
000/322.100 56.20
000/345.830 14.05
Total: 70.25
Printed: 05 -30 -2002
rew
CO
u.
t� W
W
g J'
N
ta
2 DI
Cr
0 I - '.
W
U. O
kJ z
N .
O �
Projec : � •
&rte -41 1
Type of Inspection: r
r �
\��
Address:
Date Called:
Special Instructions:
Date Wanted: �,m�
- 1 - 03 --- p•
LA- -\ i•
Requester: V i
Phone No:
aoto - gag - .(03)
INSPECTION RECORD
Retain a copy with permit
INSPECTION NO.
CITY OF TUKWILA BUILDING DIVISION
6300 Southcenter Blvd., #100, Tukwila, WA 98188 (206)431 -3670
Inspectorr
CrJYlekiaa f . yrL�i:�fS' 1 , t .;.� r,�q•^ }. ..}^,: ;qti `k _•.t�
PERMIT
A pproved per applicable codes. El Corrections required prior to approval.
COMMENTS:
i -w,; Cr) vv.( 1-to,4k
O—
'Date: L' _ 0
$47.00 REINSPECTION FEE REQUIRED. Prior to inspection, fee must be
paid at 6300 Southcenter Blvd., Suite 100. CaII to schedule reinspection.
'Receipt No.:
'Date:
Z
1
0
CO 0
CO ILI
WO
2
co 3
11J ju
z
O
H
2 o
U
O N ;
01-
W
I.
ILi
U
0
z
a
Project: ,
Ll(bP 1tV if - Lt (
ction:
of 1 �/
/ h
Ad ress:
60 S Ti`�irt IA) )
Date CalledL
/��
Special Instructions: 1
� .
Date Wanted JJ ,,,, ??
�fl10111�
a .m.
t
Requester:
1 Gt LI i
Phone
' Par 7 9 - )3.
INSPECTION RECORD
Retain a copy with permit
INSPECTION NO. PERMIT
CITY OF TUKWILA BUILDING DIVISION +�
6300 Southcenter Blvd., #100, Tukwila, WA 98188 (206)431 -3670
AA o.,? 0.5
COMMENTS:
Nr 5 4nr \-k v Purl \( fl¼ V X t
Uf 5 1f�C
LO v-
Approved per applicable codes.
Inspectors:
C orrections required prior to approval.
$47.00 REINSPECTION FEE REQUIRED. Prior to inspection, fee must be
paid at 6300 Southcenter Blvd., Suite 100. CaII to schedule reinspection.
'Receipt No.:
Date:
tu
UO
N
� w
c
w
2
d
Z�
uj
M p
U co
0 I-
w W
LL. O
W Z
O
Z
Pro
�.a��' t I wY-� -�
Type of l ection: UG1Y\ 1 I V
J
Addre s :
e 0 S.
%
W
Date Called:
i � /� OZ
Special Instructions:
/
/
Date Wanted: I 01_ a;._
Requester:
P CLA'°
Phone No:
2 zG3)
INSPECTION RECORD
Retain a copy with permit
INSPECTION NO.
:CITY OF TUKWILA BUILDING DIVISIO
6300 Southcenter Blvd:, #100, Tukwila, WA 98188
(206)431 -3670
Approved per applicable codes. El Corrections required prior to approval.
COMMENTS:
Coir ykc -erovv. r **1 )
'Inspector: ' ----- N „zu
Date: d1
$47.00 REINSPECTION FEE REQUIRED. Prior to inspection, fee must be
paid at 1300 Southcenter Blvd., Suite 100. CaII to schedule reinspection.
Receipt No.:
'Date:
1
COMMENTS: '.\ `j'kr.vvvladrpt Li r'e- p prava�
r +
L
rer-I ti k Ire -c( I
n k) h _ I VTh
S -�4 c��c 4 4 ps S r -95 a
'
� � r• '
€V\a cA /2 s 04- boil- cP v1l*
Special Instructions:
r V c `1- S 1 1v\ s o'Ui 4- 4. e`- (a tel QN 4'
Date Wante ( a
10 f z f n p.m.
v f p\ 0 r.
3
. •
? nde_ le u,r v. e, ► r � 1 ci
t
3r)
�
\ c Qv.d CO uer C'N,-1 ra, .Y‘OtP
t by (
�.1.�
S-t-ru 1- vPVtk' vf.s 1 r‹ I ti.
p
ct ce 4o ct w v.46; ►11 1" r
`I 106irom
ro_It 6 I r; Y
r +
L
Ty a of Inspection:
n k) h _ I VTh
A d s
� 5
'
� � r• '
Date ailed:
1C) f i n
Special Instructions:
Date Wante ( a
10 f z f n p.m.
*P P Cck) '
Phone q33' ' Z 0
INSPECTION NO.
CITY OF TUKWILA BUILDING DIVISION
6300 Southcenter Blvd., #100, Tukwila, WA 98188
Approved per applicable codes.
IN RECORD
Retain a copy with permit
Inspector:
rrections required prior to approval.
Date
Io -� —o-
$47.00 REINSPECTION FEE REQUIRED. Prior to inspection, fee must be
paid at 1300 Southcenter Blvd., Suite 100. CaII to schedule reinspection.
(Receipt No.:
'Date:
NO
MANUFACTURER
FRAME MATERIAL
MODEL ##
SIZE
U -VALUE
AREA S.F.
MIt/G A1440 -
VIN4
9
X
O. GC
60
2
t
X
3�
2
°
3o
a °4°
48
l
4°5(
14
4°3°
(-/-
1
404 6
I�
1
I 9
7.
I
V' 4
8
2
2°&°
8
2
1
7 °4°
56
NI
TOTAL GLAZING AREA
344.c
Residential Energy Code Form 1-115 9/10/01
CITY OF
Permit Center
6300 Southcenter Boulevard, Suite 100,
Tukwila, WA 98188
Telephone: (206) 431 -3670
WINDOW SCHEDULE GLAZING /SKYLIGHTS BY TYPE
S.F. -
TOTAL CONDITIONED
FLOOR AREA
S.F. x 100 =
WASHINGTON STATE ENERGY CODE C,IT ROF Tl1KUl►ILA
RESIDENTIAL COMPLIANCE FORM
PRESCRIPTIVE APPROACH
P RMIT CENTER
1. HEAT SOURCE: 6 (gas, oil, propane, heat pump, elect lc)
2. WINDOW SCHEDULE: Fill in the window schedule based upon the proposed residential design and
calculate the glazing area as % of the conditioned floor area.
3. CHECK PRESCRIPTIVE OPTION: Glazing percentage will determine which option to choose. Mark
option at top of column. (See back of this sheet) FILE COPY
ACTIVITY #:
H -15
TOTAL GLAZING AREA 44
(add entire column) 344 ''
PROPOSED GLAZING
PERCENTAGE
15
The proposed glazing percentage must be Tess than or equal to the glazing percentage listed under the
prescriptive option that is selected.
Mo- 0(
. movio.,.nt.. �. 4.100 1+.
CHECK ./ One •1
.OPTION?: OPTION :OPTION. OPTION OPTION OPTION OPTION OPTION
• ; II III. IV V VI2 VIl VIn
O
O
Q
e
0
Q
O
O
.HVA.CEfficie
Med
Med
High
Med
Low
Med
Med
Med
Glazing`:
Max:.' •
%:of
floor"
10%
12%
21%
21%
21%
25%
30%
unlimited
.V.ert
.U- factors'
0.70
0.65
0.75
0.65
0.60
0.45
0.40
.25
Overhead.Glazing
U - Factor ' '' '
0.68
0.68
0.68
0.68
0.68
0.68
0.68
0.40
000r . . U- Factors
.. ...... .. .. ..
0.40
0.40
0.40
0.40
0.40
0.40
0.40
0.40
, :R- factor)
(R -2.5)
(R -2.5)
(R -2.5)
(R -2.5)
(R -2.5)
(R -2.5)
(R -2.5)
(R -2.5)
Ceilings::.
w /attics
R -30
R -30
R -30
R -30
R -30
R -38
R -30
R -30
vaulted
.........:. .
R -30
R -30 •
R -30
R -30
R -30
R -30
R -30
R -30
:Walls::::
:above grade:
R -15
R -15
R -19
R -19
R -19
R -19
R -19
R -19
-: below:grade
interior or
`R -15
R -15
R -19
R -19
R -19
R -19
R -19
R -19
exterior'
R -10
R -10
R -10
R -10
R -10
R -10
R -10
R -10
'Floor:
R -19
R -19
R -19
R -19
R -19
R -25
R -25
R -25
:Slab:on:grade:..
R -10
R -10
R -10
R -10
R -10
R -10
R -10
R -10
Address:
Chapter 6 Qualification Form Zone 1, Other fuels
Residential:.Prescriptive' (Chapter 6) Options for Heat Source :. Other fuels
Instructions:
1) Carefully review the requirements for each of the options below. Choose an option that best suits your dwelling
design. Glazing percentage typically determines which option to choose. Your building must match the
selected option requirements without exceptions or substitutions.
2) Check V the 0 above the requirements of your option. Disregard components or equipment that do not
apply to your project. Your permit will be processed more efficiently if you provide all of the requested
information. Department staff can help you with general questions about this form.
Can't Comply? If none of the Prescriptive (Chapter 6) options are acceptable, consider the Component
Performance (Chapter 5) Approach. Note that the Component Performance requirements are no less stringent than
the Prescriptive requirements. Calculations may be performed with a 2000 WSEC Chapter 5 Residentiai
Qualification Foim, or by using an acceptable computer program such as WATTSUN.
Footnotes:
1. Nominal R- values are for wood frame assemblies only, or assemblies built in accordance with Sec. 601.1
2. The following options are applicable to buildings 2 stories or less: 0.50 MAX for glazing areas of 25% or
less; 0.45 MAX for glazing areas of 30% or less.
3. Min. HVAC equipment requirements: 'Low' AFUE ? 0.74. 'Med' AFUE >_ 0.78. 'High' AFUE ? .088.
Heat Pumps: 'low' HSPF >_ 6.35; 'Med' HSPF >_ 6.8; 'High' HSPF ? 7.7. Water & ground source heat
pumps are 'med' and shall meet a minimum COP per WSEC Table 5 -7.
4. (Vertical + Overhead Glazing) + conditioned floor area = maximum glazing percentage. Overhead
glazing with a U- factor of .40 or less is exempt from glazing percentage calculations.
5. Glazing, skylight, and door U- factors may be weighted to meet the U- factor requirements.
PlariReuiiew (For officia use only)
:;Tile sel ected Op tion is ap propriate, for this: dwelling desi
rove
Revised 6125!01
Permit #
Wasnnglan Slam Umveroly Energy Program
C52' 3 =:00 zoo bdc 601
Project Name:
5 — - To I!
c
Address: S
c Pa s a-I 4 Ave
5
Residential Building Permit Number:
1. Prescriptive Option W.S.E.C. Chapter 6, (check building permit option used):
• ❑ I. ❑ 11 ❑ inn. P1 iv. ❑ v. ❑ vi. ❑ vli.
❑ VIII.
2. House Square Footage (HSqFt) 2.86
3. Heating System installed, (check system type below):
Cl a. Electric Resistance /21 BTU /h per sq. ft.
❑ b. Electric (forced air) /24 BTU /h per sq. ft.
j21 c. Other Fuels (gas, heat pump) /27 BTU /h per sq. ft.
4. Equipment:
a. Make TtO AWE CO-- - .
b. Model
c. Size in BTU's 6 0 1
5. Calculation /(HSqFt) 1-2 (see line 2 above)
BTU /h X 2q" (see line 3 a, b, or c above)
I i - 7 1 --v BTU Equipment Maximum Size
7/9/96
CITY 0-F TUKWILA
Permit Center
6300 Southcenter Boulevard, Suite 100, Tukwila, WA 98188
Telephone: (206) 431 -3670
Prescriptive Heating System Sizing for
Single Family Homes - New Construction
Washington State Energy Code Chapter 9, Climate Zone 1
PERMIT APPLICATION #:
FILE I OPY
H -6
RECEIVED
CITY OF TUKWILA
JAH
Applicant's Si nature:
y47,6 Lih3c ni
Date:
M0&013
F'"`T C O ICY
PERMIT NO. J7,` CAl
PROJECT NAME: CE, s. 1.0-f C.
whole house ventilation systems.
bathrooms, laundries and kitchens.
rating for each fan.
o Exhaust ducts shall be equipped with back -draft dampers.
Note this requirement on plans.
DATE: rZ
WASHINGTON STATE VENTILATION AND
INDOOR AIR QUALITY CODE.
Mechanical ventilation criteria using prescriptive
methods for Group R Occupancies four stories and
less. (Group R Occupancies: Hotels, apartment houses,
congregate residences, dwellings and lodging houses.)
�
ut o
gQ
to
v
W.
Each dwelling unit or guest room shall be equipped with source specific and ?
o
w
Source specific exhaust fans are required in the following locations: 0
o N'
01-
=w
I- �
LL o
ii z
✓ Locate exhaust fans on plan(s) and note fan flow performance o x
Minimum fan flow rating = 50 cfm @ 0.25 inches water gauge for bathrooms
and laundries, and 100 cfm @ 0.25 inches water gauge for kitchen exhaust fans.
• All exhaust ducts located in unconditioned spaces shall
be insulated to a minimum of R -4. Note this requirement on plans.
Whole house ventilation shall be provided by a system that meets the
requirements of either:
Section 303.4. — I - TD 1 i
Section 303.4.2
Section 303.4.3
Section 303.4.4
Indicate on plans a proposed system to be used.
(Refer to attached code sections, select one, and list here:
303.4 Prescriptive Whole House Ventilation Systems:
Whole house ventilation shall be provided by a system that
meets the requirements of either Section 303.4.1, 303.4.2,
303.4.3, or 303.4.4. A system which meets all of the
requirements of one of these Sections shall be deemed to
satisfy the requirements for a whole house ventilation
system.
_303.4.1, Intermittent Whole House Ventilation Using
Exhaust Fans: This Section establishes minimum
prescriptive requirements for intermittent whole house
ventilation systems using exhaust fans. A system which
meets all the requirements of this Section shall be deemed
to satisfy the requirements for a whole house ventilation
system.
303.4.1.1 Whole House Ventilation Fans: Exhaust fans
providing whole house ventilation shall have a flow rating
at 0.25 inches water gauge as specified in Table 3 -2.
Manufacturers' fan flow ratings shall be determined
1 according to HVI 916 (April 1995) or AMCA 210.
303.4.1.2 Fan Noise: Whole house fans located 4 feet or
less from the interior grille shall have a sone rating of 1.5 or
less measured at 0.1 inches water gauge. Manufacturer's
I noise ratings shall be determined as per HVI 915 (October
1995). Remotely mounted fans shall be acoustically
isolated from the structural dements of the building and
from attached duct work using insulated flexible duct or
other approved material.
303.4.1.3 Fan Controls: The whole house ventilation fan
shall be controlled by a 24 -hour clock timer with the
capability of continuous operation, manual and automatic
control. The 24 -hour timer shall be readily accessible. The
24-hour timer shall be capable of operating the whole house
ventilation fan without energizing other energy - consuming
appliances. At the time of final inspection, the automatic
control timer shall be set to operate the whole house fan for
at least 8 hours a day. A label shall be affixed to the control
that reads "Whole House Ventilation (see operating
instructions)."
303.4.1.4 Exhaust Ducts: All exhaust ducts shall
terminate outside the building. Exhaust ducts shall be
equipped with back -draft dampers. All exhaust ducts in
unconditioned spaces shall be insulated to a minimum of
R-4.
Effective 7/01/01
Washington State Ventilation
And Indoor Air Quality Code
303.4.1.5 Outdoor Air Inlets: Outdoor air shall be
distributed to each habitable room by individual outdoor air
inlets. Where outdoor air supplies are separated from
exhaust points by doors, provisions shall be made to ensure
air flow by installation of distribution ducts, undercutting
doors, installation of grilles, transoms, or similar means
where permitted by the Uniform Building Code. Doors
shall be undercut to a minimum of 1/2- inch above the
surface of the finish floor covering.
Individual room outdoor air inlets shall:
a. Have controllable and secure openings;
b. Be sleeved or otherwise designed so as not to
compromise the thermal properties of the wall or window in
which they are placed;
c. Provide not less than 4 square inches of net free area
of opening for each habitable space. Any inlet or
combination of inlets which provide 10 cfm at 10 Pascals as
determined by the Home Ventilating Institute Air Flow Test
Standard (HVI 901 [November 1996] ) are deemed
equivalent to 4 square inches net free area.
Inlets shall be screened or otherwise protected from entry
by leaves or other material. Outdoor air inlets shall be
located so as not to take air from the following areas:
a. Closer than 10 feet from an appliance vent outlet.
unless such vent outlet is 3 feet above the outdoor air inlet.
b. Where it will pick up objectionable odors, fumes or
flammable vapors.
c. A hazardous or unsanitary location.
d. A room or space having any fuel - burning appliances
therein.
e. Closer than 10 feet from a vent opening of a plumbing
drainage system unless the vent opening is at least 3 feet
above the air inlet.
f. Attic, crawl spaces, or garages.
EXCEPTION: Exhaust only ventilation systems do not
require outdoor air inlets if the home has a ducted forced
air heating system that communicates with all habitable
rooms and the interior doors are undercut to a minimum of
/- inch above the surface of the finish floor covering.
9
......,_....... ... �.>.., �....,. �.. up+ �..,..,....�x+ro...�.wm.a.+m+•s, gee, �swrweatr.,, xtatwsxWiPR% AkI +A�!ea»'R�?c�.tlU!Ya'9ll�:INP�14
Effective 7/01/01
303.4.3 Prescriptive Requirements for Intermittent
Whole House Ventilation Using a Supply Fan: This
Section establishes minimum prescriptive requirements for
intermittent whole house ventilation systems using an inline
supply fan. A system which meets all the requirements of
this Section shall be deemed to satisfy the requirements for
a whole house ventilation system.
303.4.3.1 Outdoor Air: Supply fan ventilation systems
shall distribute outdoor air to each habitable room through
the forced -air system ducts or through dedicated ducts to
each habitable room. Supply fans shall have the capacity to
provide the amount of outdoor air specified in Table 3 -2 at
0.40 inches water gauge as per HVI 916 (April 1995). The
outdoor air must be filtered before it is delivered to
habitable rooms. The filter may be located at the intake
device, inline with the fan, or , in the case of a connection to
the return plenum of the airhandler, using the furnace filter.
An outdoor air inlet shall be connected to either the supply
or return air stream.
303.4.3.2 Ducts: An outdoor air inlet duct connection to
the supply air stream shall be located downstream of the
forced -air system blower. An outdoor air inlet duct
connection to the return air stream shall be located at least 4
feet upstream of the forced -air system blower and its filter.
Neither type of duct shall be connected directly into a
furnace cabinet to prevent thermal shock to the heat
exchanger. The outdoor air inlet duct shall be prescriptively
sized in accordance with Table 3 -6. The terminal element
on the outside of the building shall be sized 2 inches in
diameter larger than the outdoor air inlet duct.
303.433 Dampers: The system shall be equipped with a
back -draft damper and one of the following:
1. A calibrated manual volume damper installed and set
to meet the measured flow rates specified in Table 3 -2 by
field testing with a pressure gauge and/or following
manufacturer's installation instructions; or
2. A manual volume damper installed and set to meet the
measured flow rates specified in Table 3 -2 by field testing
with a flow hood or a flow measuring station; or
f. Attic, crawl spaces, or garages.
Washington State Ventilation
And Indoor Air Quality Code
3. An automatic flow - regulating device sized to the
specified flow rates in Table 3 -2 which provides constant
flow over a pressure range of 0.20 to 0.60 inches water
gauge.
303.4.3.4 Ventilation Controls: The whole house
ventilation system shall be controlled by a 24 -hour clock
timer with the capability of continuous operation. manual
and automatic control. This will control the inline supply
fan. The 24 -hour timer shall be readily accessible. The
24 -hour timer shall be capable of operating the whole house
ventilation system without energizing other energy -
consuming appliances. At the time of final inspection, the
automatic control timer shall be set to operate the whole
house system'for at least 3 hours a day. A label shall be
affixed to the control that reads "Whole House Ventilation
(see operating instructions)."
303.4.3.5 Ventilation Duct Insulation: All supply ducts
in the conditioned space shall be insulated to a minimum of
R4.
303.4.3.6 Outdoor Air Inlets: Inlets shall be screened or
otherwise protected from entry by leaves or other material.
Outdoor air inlets shall be located so as not to take air from
the following areas:
a. Closer than 10 feet from an appliance vent outlet,
unless such vent outlet is 3 feet above the outdoor air inlet.
b. Where it will pick up objectionable odors, fumes or
flammable vapors.
c. A hazardous or unsanitary location.
d. A room or space having any fuel- burning appliances
therein.
e. Closer than 10 feet from a vent opening of a plumbing
drainage system unless the vent opening is at least 3 feet
above the air inlet.
1
• 2000 Edition
303.4.4 Prescriptive Requirements for Intermittent
Whole House Ventilation Using a Heat Recovery
Ventilation System: This Section establishes minimum
prescriptive requirements for intermittent whole house
ventilation using a heat recovery ventilation system.
303.4.4.1 Heat Recovery Ventilation Systems: All duct
work in heat recovery systems shall be not less than 6 inch
diameter. Balancing dampers shall be installed on the inlet
and exhaust side. Flow measurement grids shall be installed
on the supply and return. System minimum flow rating shall
be not less than that specified in Table 3 -2. Maximum flow
rates in Table 3 -2 do not apply to heat recovery ventilation
systems. ,
303.4.4.2 Ventilation Controls: The whole house
ventilation system shall be controlled by a 24 -hour clock
tinier with the capability of continuous operation, manual
and automatic control. This control will control the inline
supply fan. The 24 -hour timer shall be readily accessible.
The 24 -hour timer shall be capable of operating the whole
house ventilation system without energizing other energy -
consuming appliances. At the time of final inspection, the
automatic control timer shall be set to operate the whole
house system for at least 8 hours a day. A label shall be
affixed to the control that reads "Whole House Ventilation
(see operating instructions)."
303.4.4.3 Ventilation Duct Insulation: All supply ducts
in the conditioned space installed upstream of the heat
exchanger shall be insulated to a minimum of R-4.
303.4.4.4 Outdoor Air Inlets: Inlets shall be screened or
otherwise protected from entry by leaves or other material.
Outdoor air inlets shall be located so as not to take air from
the following areas:
a. Closer than 10 feet from an appliance vent outlet,
unless such vent outlet is 3 feet above the outdoor air inlet.
b. Where it will pick up objectionable odors, fumes or
flammable vapors.
c. A hazardous or unsanitary location.
d. A room or space having any fuel- burning appliances
therein.
e. Closer than 10 feet from a vent opening of a plumbing
drainage system unless the vent opening is at least 3 feet
above the air inlet.
12
f. Attic, crawl spaces. or garages.
SECTION 304 — MECHANICAL VENTILATION
CRITERIA AND MINIMUM VENTILATION
PERFORMANCE FOR ALL OTHER OCCUPANCIES
NOT COVERED IN SECTIONS 302 AND 303.
304.1 Ventilation: The minimum requirements for
operable area to provide natural ventilation are specified in
the Uniform Building Code (UBC) as adopted by the state
of Washington.
Where a mechanical ventilation system is installed, the
mechanical ventilation system shall be capable of supplying
ventilation air to each zone with the minimum outdoor air
quantities specified in Table 3-4.
EXCEPTION: Where occupancy density is known and
documented in the plans. the outside air rate may be based
on the design occupant density. Under no circumstance
shall the occupancies used result in outside air less than
one -half that resulting from application of Table 3-4
estimated maximum occupancy values.
The outdoor air shall be ducted in a fully enclosed path
directly to every air handling unit in each zone not provided
with sufficient operable area for natural ventilation.
EXCEPTION: Ducts may terminate within 12 inches
of the intake to an HVAC unit provided they are physically
fastened so that the outside air duct is directed into the unit
intake.
In all parking garages, other than open parking garages as
defined in UBC Section 3 1 1.9, used for storing or handling
of automobiles operating under their own power and on all
loading platforms in bus terminals, ventilation shall be
provided at 1.50 cfm per square foot of gross floor area.
The building official may approve an alternate ventilation
system designed to exhaust a minimum 14,000 cfm for each
operating vehicle. Such system shall be based on the
anticipated instantaneous movement rate of vehicles but not
less than 2.5% (or one vehicle) of the garage capacity.
Automatic carbon monoxide sensing systems may be
submitted for approval.
In all buildings used for the repair of automobiles, each
repair stall shall be equipped with an exhaust extension
duct, extending•to the outside of the building, which if over
10 feet in length, shall mechanically exhaust 300 cfm.
Connecting offices and waiting rooms shall be supplied with
conditioned air under positive pressure.
Combustion air requirements shall conform to the
requirements of Chapter 7 of the UMC.
Mechanical refrigerating equipment and rooms storing
refrigerates shall conform to the requirements of Chapter 11
of the UMC.
304.2 Alternate Systems: Alternate systems designed in
accordance with ASHRAE Standard 62.1 -1999 shall be
permitted.
Effective 7/01/01
2
1
ce W
QQ �
J
0
to
LIJ
w
J
N LL
WO
u .
O
W
F_
W 1—
W
no
O-
O 1-
LU
O
W Z
to
O~
Z
8
Required Flow (CFM)
Per Table 3 -2
Minimum Smooth
Duct Diameter
Minimum Flexible
Duct Diameter
Maximum Length'
Maximum Number
of Elbows
50 - 80
6"
7"
20'
3
80 - 125
7"
8"
20'
3
115 - 175
8"
10"
20'
3
170 - 240
9"
11"
20'
3
Supply Fan Tested CFM at 0.40" WG
Specified Volume
from Table 3 -2
Minimum Smooth
Duct Diameter
Minimum Flexible
Duct Diameter
50 — 90 CFM
4 inch
5 inch
90 - 150 CFM
5 inch
6 inch
150 - 250 CFM
6 inch
7 inch
250 - 400 CFM
7 inch
8 inch
Effective 7/01/01
1. For lengths over 20 feet increase duct diameter 1 inch.
2. For elbows num,ering more than 3 increase duct diameter 1 inch.
TABLE 3 -5
PRESCRIPTIVE INTEGRATED FORCED AIR SUPPLY DUCT SIZING
TABLE 3 -6
PRESCRIPTIVE SUPPLY FAN DUCT SIZING
Washington State Ventilation
And Indoor Air Quality Code
17
DEPARTMENTS:
Building Division
Atw *24
Public Works
\PRROUTE.DOC
5/99
PERMIT COORD COi /(
PLAN REVIEW /ROUTING SLIP
ACTIVITY NUMBER:
PROJECT NAME:
MO2 -013
CBI - LotC
DATE: 01 -22 -02
SITE. ADDRESS: XXXX S Ryan Way SUITE #
Original Plan Submittal Response to Incomplete Letter #
Response to Correction Letter # Revision # After Permit Is Issued
Structural
DETERMINATION OF COMPLETENESS: (Tues., Thurs.)
Complete Incomplete
TUES /THURS ROUTING:
Please Route Structural Review Required
APPROVALS OR CORRECTIONS: (4 weeks)
Fire Prevention
Approved Approved with Conditions
CORRECTION DETERMINATION:
Approved n Approved with Conditions
REVIEWER'S INITIALS:
--ve
n
PERMIT COORD COPY
Planning Division
Permit Coordinator
DUE DATE: 01 -24-02
Not Applicable
n No further Review Required
DUE DATE 02 -21 -02
Comments:
REVIEWER'S INITIALS: DATE:
Not Approved (attach comments) n
REVIEWER'S INITIALS: DATE:
DUE DATE
Not Approved (attach comments)
DATE:
00
0
w w
J
CD Lt.
w 0
LL
F w
w
D p
V
0-
0 1-
=w
ui0
0 F-
z
1
March 11, 2003
Mark Travers
2315 East Pike Street
Seattle, WA 98122
City of Tukwila
Department of Community Development Steve Lancaster, Director
RE: Permit Application No. MO2 -013
4808 S Ryan Way
Dear Permit Holder:
In reviewing our current records the above noted permit has not received a final inspection by the City of Tukwila
Building Division. Per the Uniform Building Code and /or Uniform Mechanical Code, every permit issued by the
Building Official under the provisions of this code shall expire by limitation and become null and void if the
building or work authorized by such permit is not commenced within 180 days from the date of such permit, or if
the building or work authorized by such permit is suspended or abandoned at any time after the work is
commenced for a period of 180 days.
Based on the above, you are hereby advised to:
• Call the City Of Tukwila Permit Center at (206) 431 -3670 to arrange for the next or final
inspection.
This inspection is intended to determine if substantial work has been accomplished since issuance of the permit
or last inspection; or if the project should be considered abandoned.
If such determination is made, the Building Code does allow the Building Official to approve a one -time
extension up to 180 days. Extension requests must be in writing and provide satisfactory reasons why
circumstances beyond the applicants control have prevented action from being taken.
In the event you do not call for the above inspection or request and receive an extension prior to April 5, 2003,
your permit will become null and void and any further work on the project will require a new permit and
associated fees.
Thank you for your cooperation in this matter.
Sincerely,
Stefania Spencer
Permit Technician
Xc: Permit File No. MO2 -013
Bob Benedicto, Building Official
Steven M. Mullet, Mayor
6300 Southcenter Boulevard, Suite #100 • Tukwila, Washington 98188 • Phone: 206-431-3670 • Fax: 206 - 431 -3665
— LICENSE DETAIL INFORMATION Form
STATE OF WASHINGTON
DEPARTMENT OF LABOR AND INDUSTRIES
Specialty Compliance Services Division
P. O. Box 44000 Olympia, WA 98504 -4000
THE RESULT OF YOUR INQUIRY FOR LICENSE NUMBER SELECTED IS:
LICENSE DETAIL INFORMATION
Current Filter: None
Registration# or License COLUMBI033LL
Name COLUMBIA BUILDERS INC
Address 4819 49TH AVE SW
Address
City SEATTLE
State WA
Zip 98116
Phone Number 2069382637
Effective Date 6/13/97
Expiration Date 5/22103;
Registration Status ACTIVE
Type CONSTRUCTION CONTRACTOR
Entity CORPORATION
Specialty Code GENERAL
Other Specialties
UBI Number 601788046
'VIEW *VIEW CROSS REFERENCE FILE FOR THIS LICENSE* * *
* * *VIEW PRINCIPAL OWNER(S) FOR THIS LICENSE* * *
'VIEW *VIEW CONTRACTOR BOND /SAVINGS INFORMATION * * *
'CHECK *CHECK INQUIRY FOR SUMMONS AND COMPLAINTS* * *
* * * VIEW CONTRACTOR INSURANCE INFORMATION * * *
https : / /wws2.wa.gov /lni/bbip /TF2Form .asp ?License= COLUMBI033LL
Page 1 of 1
New inquiry by CITY, NAME, PRINCIPAL OWNER NAME, NUMBER, UBI NUMBER or
return to the L &I Construction Compliance Home Page
05/30/2002