HomeMy WebLinkAboutPermit M02-014 - LABELLARTE RESIDENCE - LOT 2M02 -014
LABELLARTE RESIDENCE
—LOT 2
4806 So. Ryan Way
SEE ALSO: D02 -014
1
Department of Community Development / 6300 Southcenter BL, Suite 100 / Tukwila, WA 98188 / (206) 431 -3670
City of Tukwila
Parcel No.: 5476800272
Address: 4806 S RYAN WY TUKW
Suite No:
Tenant:
Name: LABELLARTE RESIDENCE - LOT 2
Address: 4806 5 RYAN WY, TUKWILA, WA
Owner:
Name: LABELLARTE PAUL
Address: 4819 49 AV SW, SEATTLE
Contact Person:
Name: MARK TRAVERS
Address: 2315 E PIKE ST, SEATTLE, WA
Contractor:
Name: COLUMBIA BUILDERS INC
Address: 4819 49TH AVENUE SW, SEATTLE, WA
Contractor License No: COLUMBI033LL
DESCRIPTION OF WORK:
INSTALL CENTRAL FORCED AIR FURNACE AND DUCTS IN NEW SINGLE FAMILY RESIDENCE.
Value of Construction:
Type of Fire Protection:
Permit Center Authorized Signature: /c -e
1 hereby certify that I have read and examined this permit and know the same to be true and correct. All provisions of law and
ordinances governing this work will be complied with, whether specified herein or not.
The granting of th'- rmit d . presume to give authority to violate or cancel the provisions of any other state or local laws
regulating const ction th r 'ance of work. I am authorized to sign and obtain this mechanical permit.
Signature: P -y �'• Date:
Print Name:
4
J
$5,000.00
N/A
BA
MECHANICAL PERMIT
Permit Number: MO2 -014
Issue Date: 05/30/2002 v rew
Permit Expires On: 11/26/2002 U
to
to IL
w O
g
ui
W.
2p
U
o cn:
I—
ww
Expiration Date: 05/22/2003 V'
u_ O'
to
U
e
O
Fees Collected: $70.25 z
Uniform Mechnical Code Edition: 1997
Phone:
Phone: 206 763 -8496
Phone: 206 938 -2637
This permit shall become null and void if the work is not commenced within 180 days from the date of issuance, or if the work is
suspended or abandoned for a period of 180 days from the last inspection.
doc: Mech
Date:
MO2 -014 Printed: 05 -30 -2002
1
Signature:
Print Name: Qu
doc: Conditions
City of Tukwila
Department of Community Development / 6300 Southcenter BL, Suite 100 / Tukwila, WA 98188 / (206) 431 -3670
Parcel No.: 5476800272
Address: 4806 S RYAN WY TUKW
Suite No:
Tenant: LABELLARTE RESIDENCE - LOT 2
1: ** *BUILDING DEPARTMENT * **
2: No changes will be made to the plans unless approved by the Engineer and the Tukwila Building Division.
3: Plumbing permits shall be obtained through the Seattle -King County Department of Public Health. Plumbing will be inspected by
that agency, including all gas
piping (296 - 4722).
4: Electrical permits shall be obtained through the Washington State Division of Labor and Industries and all electrical work will be
inspected by that agency
(206- 835 - 1111).
5: All permits, inspection records, and approved plans shall be available at the job site prior to the start of any construction. These
documents are to be
maintained and available until final inspection approval is granted.
6: Any exposed insulations backing material shall have a Flame Spread Rating of 25 or less, and material shall bear identification
showing the fire performance
rating thereof.
7: All construction to be done in conformance with approved plans and requirements of the Uniform Building Code (1997 Edition) as
amended, Uniform Mechanical Code
(1997 Edition), and Washington State Energy Code (1997 Edition).
8: Validity of Permit. The issuance of a permit or approval of plans, specifications, and computations shall not be construed to be a
permit for, or an approval
of, any violation of any of the provisions of the building code or of any other ordinance of the jurisdiction. No permit presuming to
give authority to violate
or cancel the provisions of this code shall be valid.
9: Manufacturers installation instructions required on site for the building inspectors review.
10: Fuel burning appliances may not be installed in sleeping rooms, U.M.C. 304.5.
11: Appliances which generate flame, spark or glowing ignition, shall be elevated 18 inches above the floor (U.M.C. 303.1.3.).
12: Water heater shall be anchored to resist earthquake (U.P.C. 510.5).
I hereby certify that 1 have read these conditions and will comply with them as outlined. All provisions of law and ordinances
governing this work will be complied with, whether specified herein or not.
The granting of this permit does not presume to give authority to violate or cancel the provision of any other work or local laws
regulating constr ion or t ,- • erformance of work.
itGl►
►``■
PERMIT CONDITIONS
MO2 -014
Permit Number: MO2 -014
Status: ISSUED
Applied Date: 01/22/2002
Issue Date: 05/30/2002
Date:
Printed: 05 -30 -2002
1
Project Name/Tenant: J, E — Kw / , 4 -
r ,v I
<�, r, ���';. �t� t ' +,�:' °,:�r Y:
4'l'�• 1' .1. J '!+!��t�• "; P �[ . ','�h '\
tifi�.�"�t�'�i�' � v+: t� ` �€u °'� �F ;
� r y•.�' +a.•a4•,'.�r. yrU:t r.dn:;!';J +i'r.!i'.• '
Date: 0/471O2
Value of Mechanical Equipment:
Site AddZ s :
s 0,41v w y ) �utcw lL
Ci State/Zi
w
T Parcel u ber: ON
o o$
Pro erty caner: [ i i /
_
Phone: (w/) 93 Z63 -
Street Address: / 676 ci
%I
,5ti
C ��m 90 //
Fax #: ( )
Contractor: OWA/ - S
/
/
Phone: ( )
Street Address:
City State/Zip:
Fax #: ( )
Contact Person:
Phone: (71°6) .-g3
Fax #: (n „/) 32
64
36=.
Street Address: 23 I1 elx- (57
7)Z
C Sta98 p
1 ! (� r. Ni' �'_I�' t!!`f 1•It'!�?.'U?•:.1r �� .Y. M1= + iuV� -1•.;�r.�la.
,�� /lb7'Nfil'OWNER�'b �' t1THOR/ZED./A'GENT• 1•.o- � t 4 w;'. t �
.., �. ?�'�',1 � u ,f� 1.�•;+ ,i.s,l'� �;.�.I! . a. I;�,Ia
�' '� 1� �. r '. C . _ :.t- i. Ohl y 7
<�, r, ���';. �t� t ' +,�:' °,:�r Y:
4'l'�• 1' .1. J '!+!��t�• "; P �[ . ','�h '\
tifi�.�"�t�'�i�' � v+: t� ` �€u °'� �F ;
� r y•.�' +a.•a4•,'.�r. yrU:t r.dn:;!';J +i'r.!i'.• '
Date: 0/471O2
A ��— D 'r' -olZ nP� —t—PAS
, �
Signatures
Print name: •M
- t - �e. v -its
- K
Phone: (q/) -
- 63
T a
,p4 9/
O .- t . Jv
Fax #: (V ) 3 2g 323
Address:
City/ State/Zip:
- ' iAlk q e 1 22 ._
2315
- fl � Er
11/1/99
retch pennlidoc
CITY OF ' .110/1/ILA
Permit Center
6300 Southcenter Boulevard, Suite 100
Tukwila, WA 98188
(206) 431 -3670
R SIAI I USI ONI Y
i.�
Project 'Nimbi!:
Permit Number6
Mechanical Permit Application
Application and plans must be complete in order to be accepted for plan review.
Applications will not be accepted through the mail or facsimile.
M� M'R. °^""�''Ei �':f M4 M�1'�7 ?nt? i n�ii Mi ^ct Ir :4x� ?,Im!I�!' -•G is all': q, •J' Rp , e4'e"4'; 1' . L, n �0�twx ?I4M2'.'h,l, .fir• +F ".I- ':I'�' + �, !�i � tt•6•r,Sw. W'M'd 'E 1. ^M !. + ,„� �, � 1 J�•
yaw, s r � � ��;r��,t 1��C il�`f � A : P R I �gRE•VIE �1 / P!Rb�l///// i t� IJES,T�I s: 0 + � �klt u�Ul��1j.�'PpLI,CI r1l d "�y,,�"' �� � w ?$fir
Description of work to be done (please be specific): ^^ �11 ��/,� w 10 mm Pict
/JV 7 4 f _ FO /9 F006 /1 4}'a '4.7
Current copy of Washington State Department of Labor and Industries Valid Contractor's License. If not available at the time of
application, a copy of this license will be required before the permit is issued OR submit Form H4, "Affidavit in Lieu of Contractor
Registration ".
Building Owner /Authorized Agent: If the applicant is other than the owner, registered architect/engineer, or contractor licensed by the
State of Washington, a notarized letter from the property owner authorizing the agent to submit this permit application and obtain the
permit will be required as part of this submittal.
1 HEREBY CERTIFY THAT I HAVE READ AND EXAMINED THIS APPLICATION AND KNOW THE SAME TO BE TRUE UNDER
PENALTY OF PERJURY BY THE LAWS OF THE STATE OF WASHINGTON, AND I AM AUTHORIZED TO APPLY FOR THIS PERMIT.
Expiration of Plan Review - Applications for which no permit is issued within 180 days following the date of application shall expire by
limitation. The building official may extend the time for action by the applicant for a period not exceeding 180 days upon written
request by the applicant as defined in Section 114.4 of the Uniform Mechanical Code (current edition). No application shall be
extended more than once.
Date application accepted:
/ - 22 -oz
Date application expires:
7 -2Z -o2
Application taken by: (initials)
✓
Submittal Requirements
Floor plan and system layout
■.
,R plan required to identify individual equipment and the location of each installation (Uniform
tultanical Code 504 (e))
Details and elevations (for roof mounted equipment) and proposed screening
Heat Loss Calculations or Washington State Energy Code Form #H -7
H,V.A.C. over 2,000 CFM (approximately 5 ton and larger) must be provided with smoke detection shut-
off and will be routed to the Fire Prevention division for additional comments (Uniform Mechanical
Code 1009).
Specifications must be provided to show that replacement equipment complies with the efficiency ratings
and other applicable requirements of the Washington State Nonresidential Energy Code.
Structural engineer's analysis is required for new and the replacement of existing roof equipment
weighing 400 pounds and greater (Uniform Building Code 1632.1). Structural documentation shall be
stamped by a Washington State licensed Structural Engineer.
Mechanical Permits
COMMERCIAL: Two complete sets of drawings and attachments required with application submittal
RESIDENTIAL: Two complete sets of attachments required with application submittal
11/2/99
NOTE: Water heaters and vents are included in the Uniform Mechanical Code — please include any water
heaters or vents being installed or replaced.
Submittal Requirements
New Single Family Residence
Heat Toss calculations or Form H -6.
Equipment specifications.
Change - out or replacement of existing mechanical equipment
I 1 Narrative of work to be done, including modification to duct work.
nds
Installation of Gas Fireplace
Narrative with specification of equipment and chimney type.
If using existing chimney, provide a letter by a certified chimney sweep stating that the chimney is in safe
condition.
NOTE: Water heaters and vents are included in the Uniform Mechanical Code — please include any water
heaters or vents being installed or replaced.
•
i A
Parcel No.:
Address:
Suite No:
Tenant:
Name:
Address:
Owner:
Name:
Address:
Contact Person:
Name:
Address:
Contractor:
Name:
Address:
Value of Construction:
Type of Fire Protection:
Signature:
Print Name:
doc: Mech
5476800272
4806 S RYAN ri
•
ity'Of Tukwila.
Department of oOMmunity Development / 63,00 SOtithcenter BL, Suite 100 / TuitWila, WA 98188 / (206) 431-3670
LABELIARTE.;RESIDENCE - LOT 2
4806 S RYA4.:WY, TUKWILA, WA
LARELLARTi..
4819 49 AV.*, SEATTLE
•
MARK TRAVE4
2315 E PIKESEATTLE, WA
COLUMBIA BUILDERS INC
4819 49TE(0,ENUE SW, SEATTLE, WA
Contractor License No:;,
L-
45,000.00
• .
MECHANICAL PERMIT
. • „
MO2-014
Permit Number:
Issue Date:
Permit Expires On:
•
Phone:
MO2-014
05/30/2002
:1112612002
..•
, •
Phone: 206 763-8496
•
Phone: 206 938-2637
Expiration Date: 05/22
DESCRIPTION OF WORK:
INSTALL CENTRAL FORCED AIR AND DUCTS IN NEW'SINGLE FAMILY RESIDENCE. .
. ,
..*
• :•
•lees Collected:
Uniform Mechnical Code Edition:':'
..... , , ,.. —
"'"'",:.;- '
Permit Center Authorized Signatiii*..!.... oelt..c.€
Date: "0:
. .„ ..
• ...I hereby certify that -I have read 'ai4,eXamined this permit and know 'theSarne to be true and correct.% All provisions of law and
ordinances governing this work will be with, whether siieeified herein or not.
. ....
• , •
.....,:::,.; , .• .,
. The:granting of th rmit d• f presume to give authority to violate or cancel the provisions of any other state or local laws
regulating const
, th ,. .-
it • ance of work. I am authorized to' sign and obtain this methanicapermit.
......
Date:
. • .
. . ..
, 4 &I.e. Ala (---. .• ,
...
. .. .... r.,. ,
::•,. .
This permit shall become null arid : if the work is not commented 'within 180 days from the date'Of;issuance, or if the work is
suspended or abandoned for a pei,..
. n'oplof 180 days from the last inspection
, •.
,... • ,
•
•
•
•
$70.25
1997
Printed: 05-30-2002
Pro a t:
��el In
— L.
Type off
F—, �n� spection
51 1 ss:
Otp S oe
� h
vV //,, ,,
Date Call r d: y
/ r
Special Instructions: /
/ / / ///
Date Wan
a m
Requeste .
VC( IA/
Phone Alt
to — X138 - ,2L!'3
7
r •
INSPECTION NO.
CITY. OF TUKWILA BUILDING DIVISION
6300 Southcenter Blvd., #100, Tukwila, WA 98188
El Approved per applicable codes.
INSPECTION RECORD
Retain a copy with permit
(206)431 -3670
Corrections required prior to approval. -
COMMENTS: 1...\
,U 61611- r vn 04o
G1 & th $,--1-01 tIf'
Cl 4r9 v \
.) LUV1 00w1 `1 Civ Wl64O
�t ln rr4 v\ r
L� v• G n lr � �t !1 Cl
Inspector:
$47.00 REINSPECTION FEE REQUIRED. Prior to inspection, fee must be
paid at 6300 Southcenter Blvd., Suite 100. Call to schedule reinspection.
Receipt No.:
'Date:
�..'SY•'i2a7�^
Date 2- 2 Co cc
K
INSPECTION RECORD
Retain a copy with permit
INSPECTION NO. '` '.;
ITY =OF TUKWILA.BUILDING DIVISION
6300 Southcenter Blvd:; #100, Tukwila, WA 98188
pproved. per applicable codes.
(206)431 -3670
Prod c
Special • Instructions:
Type of Inspection:
Date Called: e'
Date Wanted:
/C' / % D Z
a.m.
p.m.
Requester:.
Phone No:
O Corrections required prior to approval.
COMMENTS:
Y`r t r) row, -P Or-i' 4
;547.00 REINSPECTIONFEE REQUIRED. Prior to inspection, fee must be
, paid at Southcenter Blvd., Suite 100. Call to schedule reinspection.
eceipt .No.::
Date:
•
•t�•;z:::' <�' tit`:
Preatw l k.ho _ LO
j493A of Inspection:
.-Koucli- 1 1 1
i
Address:.
q7 tia
119
l
Date ClI181:
/ l I
Special Instructions:
Date Wa ted:
c....
P.m.
Reques •
au
Phone No:
70i0-
7
•
• INSPECTION NO.
' i CITY OF TUKWILA BUILDING DIVISION
•
•
Approved per applicable codes.
• INSPECTION RECORD
Retain a copy with permit
(206)431-3670
ta Corrections required prioi to approval.
Liair.vey vt"os ( A
r rer(
COMMENTS: rP
Vvve4,„ v•f k
tr-e4r4. C in *key\ 0 4-0
(546 C., 4,110
5e6\ auf- - VeA ) .5vVie OCe
Pin) r ac red - ir
c4 A 1' -Moor
!Inspector: Sa rate: ,
I ( - )- e7 2 OR
$47.00 REINSPECTION FEE REQUIRED. Prior to inspection, fee must be
paid at t300 Southcenter Blvd., Suite 100. Call to schedule reinspection.
[Receipt No.:
!Date:
5
/4i6
City of Tukwila
6300 Southcenter BL, Suite 100 / Tukwila, WA 98188 / (206) 431 -3670
RECEIPT
Parcel No.: 5476800272 Permit Number: MO2 -014
Address: 4806 S RYAN WY TUKW Status: APPROVED
Suite No: Applied Date: 01/22/2002
Applicant: LABELLARTE RESIDENCE - LOT 2 Issue Date:
Receipt No.: R020000717 Payment Amount: 70.25
Initials: SKS Payment Date: 05/30/2002 01:39 PM
User ID: 1165 Balance: $0.00
Payee: COLUMBIA BUILDERS INCp
TRANSACTION LIST:
ACCOUNT ITEM LIST:
doc: Receipt
Current Pmts
Amount
MECHANICAL - RES
PLAN CHECK - RES
Type Method Description
Payment Check 4606 70.25
Description Account Code
000/322.100 56.20
000/345.830 14.05
Total: 70.25
Printed: 05 -30 -2002
1
Project', ,
z"e
Type of
-e-,-(
Peet/04s 65~406:7x/3 _row
Ads; ., ,..,
4 _5 /re/ .,.
i
Date Cal ed:
c7";•27—---3
Special Instructions:
'
Date Wanted: ,„
c' 6- -- ‘ 7 3
6.:
p.m•
Requester: „,.. ,..,
/"
Phone No:
z P-
,,:--r i: • ..:
7 . 4.pproved per applicable codes. Corrections required prior to approval.
COMMENTS:
IS
Peet/04s 65~406:7x/3 _row
P e 7,4-7 I 6el-1,
. .
,,:--r i: • ..:
INSPECYON NO. PERM
INSPECTION RECORD
/&1,2
Retain a copy with permit
CITY OF TUKWILA BUILDING DIVISION
6300 Southcenter Blvd., #100, Tukwila, WA 98188 (206)431-3670
Inspect
eceipt No.:
Date:
eV - 2 -8 --<"
47.00 REINSPECTION F REQUIRED. rior to inspection, fee must be
paid at 6300 Southcenter BIvd., Suite 1 co. Call to schedule reinspection.
'Date:
Project Name:
SP ' — ! lJK1N /L-4
Address: � S Oi Y4-tJ wA l (44) L ) 19-1. 2-
Residential Building Permit Number:
1. Prescriptive Option W.S.E.C. Chapter 6, (check building permit option used):
❑ 1. ❑ 11 ❑ 111. IV. ❑ V. ❑ Vi. ❑ V11. ❑ VIII.
2. House Square Footage (HSqFt) w53
3. Heating System installed, (check system type below):
El RECEIVED
a. Electric Resistance /21 BTU /h per sq. ft. CITYOF.TUKWILA
❑ b. Electric (forced air) /24 BTU /h per sq. ft. JAN 2 2 2002
PERMIT CENTER
7 c. Other Fuels (gas, heat pump) /27 BTU /h per sq. ft.
4. Equipment:
a. Make 74tV , e
b. Model
c. Size in BTU's 60, 000 B
5. Calculation /(HSqFt) 2053 (see line 2 above)
BTU /h X 2 � " (see line 3 a, b, or c above)
55,43 1 BTU Equipment Maximum Size
PERMIT APPLICATION #: 1910 2" 040
i
Appli ant's Sign
7/9/96
CITY OF TUKWILA
Permit Crater
6300 Southcenter Boulevard, Suite 100, Tukwila, WA 98188
Telephone: (206) 431 -3670
Prescriptive Heating System Sizing for
Single Family Homes - New Construction
Washington State Energy Code Chapter 9, Climate Zone 1
mg_.
P,4 c1L LAP1 Z-Li
Date:
0////0Z
H -6
0
NO
MANUFACTURER
FRAME MATERIAL
MODEL #
SIZE
U -VALUE
AREA S.F.
2
14i L G -a
v 1 NyL
Q20
5 0
05 -
40
2
4 ° /0
-
4
1
4°36
13.3
6 °6
80
1
3iO4°
12-
3
4 °4°
4-g
2
3' 5
30
1
4-° 5°
20
1
6 ° Z°
1 2
2
5$ 3°
30
I
40 50
-f
5-
I
2
8
2
X
Y
2
6
1. HEAT SOURCE: alkS (gas, oil, propane, heat pump, electric "TER
2. WINDOW SCHEDULE: Fill in the window schedule based upon the proposed residential design and
calculate the glazing area as % of the conditioned floor area.
3. CHECK PRESCRIPTIVE OPTION: Glazing percentage will determine which option to choose. Mark
option at top of column. (See back of this sheet)
WINDOW SCHEDULE GLAZING /SKYLIGHTS BY TYPE
TOTAL GLAZING AREA
310, 3
S.F. -
Residential Energy Code Form H15 9/10/01
CITY OF'TUKWILA
Permit Center
6300 Southcenter Boulevard, Suite 100,
Tukwila, WA 98188
Telephone: (206) 431 -3670
WASHINGTON STATE ENERGY CODE
RESIDENTIAL COMPLIANCE FORM
PRESCRIPTIVE APPROACH
TOTAL CONDITIONED
FLOOR AREA
2053
H -15
ACTIVITY #: M
o10-o14
RECEIVED
CITY OF TUKWILA
JAN 2 2 ZOOZ
FILE CO
TOTAL GLAZING AREA 44
(add entire column)
S.F. x 100 =
PROPOSED GLAZING
PERCENTAGE
/ 5.
The proposed glazing percentage must be less than or equal to the glazing percentage listed under the
prescriptive option that is selected.
/0
CHECK ✓ One•►
OPTION OPTION OPTION OPTION OPTION OPTION OPTION OPTION
I 11. 111 V VI? VI1 VIII
0
0
0
) 14
0
0
0
0
:HVAC Efficiency'';
Med
Med
High
Med
Low
Med
Med
Med
Glazing max:
•::...• : %:offloorl,.
10%
12%
21%
21%
21%
25%
30%
unlimited
Vert;: U- fa.ctor5 .
0.70
0.65
0.75
0.65
0.60
0.45
0.40
.25
•Overhead :Glazing
U- Factor
0.68
0.68
0.68
0.68
0.68
0.68
0.68
0.40
• Door U Factors
0.40
0.40
0.40
0.40
0.40
0.40
0.40
0.40
(or R- factor)
(R -2.5)
(R -2.5)
(R -2.5)
(R -2.5)
(R -2.5)
(R -2.5)
(R -2.5)
(R -2.5)
Ceilings :
!Nlattcs
....
.. ...
R -30
R -30
R -30
R -30
R -30
R -38
R -30
R -30
vaulted
R -30
R -30
R -30
R -30
R -30
R -30
R -30
R -30
.
:Walls
• above :grade
below grade .
ulterior or
R -15
. R-15
R -15
R -15
R -19
R -19
R -19
R -19
R -19
R -19
R -19
R -19
R -19
R -19
R -19
R -19
exterior
R -10
R -10
R -10
R -10
R -10
R -10
R -10
R -10
'F(bor.
R -19
R -19
R -19
. R -19
R -19
R -25
R -25
R -25
'Slab:ongrade
R -10
R -10
R -10
R -10
R -10
R -10
R -10
R -10
Permit #
SEC Chapter 6 Qualification Form- Zone 1, Other. fuels
Re nttal::Prescriptive' (Chapter 6). Options for Heat Source: Other fuels
e
Address:
1) Carefully review the requirements for each of the options below. Choose an option that best suits your dwelling
design. Glazing percentage typically determines which option to choose. Your building must match the
selected option requirements without exceptions or substitutions.
2) Check ✓ the 0 above the requirements of your option. Disregard components or equipment that do not
apply to your project. Your permit will be processed more efficiently if you provide all of the requested
information. Department staff can help you with general questions about this form.
Can't Comply? If none of the Prescriptive (Chapter 6) options are acceptable, consider the Component
Performance (Chapter 5) Approach. Note that the Component Performance requirements are no less stnngent than
the Prescriptive requirements. Calculations may be performed with a 2000 WSEC Chapter 5 Residential
Qualification Form, or by using an acceptable computer program such as WATTSUN.
Footnotes:
1. Nominal R- values are for wood frame assemblies only, or assemblies built in accordance with Sec. 601.1
2. The following options are applicable to buildings 2 stories or less: 0.50 MAX for glazing areas of 25% or
less; 0.45 MAX for glazing areas of 30% or less.
3. Min. HVAC equipment requirements: 'Low' AFUE >_ 0.74. 'Med' AFUE ? 0.78. 'High' AFUE ?..088.
Heat Pumps: 'low' HSPF >_ 6.35; 'Med' HSPF >_ 6.8; 'High' HSPF >_ 7.7. Water & ground source heat
pumps are 'med' and shall meet a minimum COP per WSEC Table 5 -7.
4. (Vertical + Overhead Glazing) + conditioned floor area = maximum glazing percentage. Overhead
glazing with a U- factor of .40 or less is exempt from glazing percentage calculations.
5. Glazing, skylight, and door U- factors may be weighted to meet the U- factor requirements.
f o fficial use onl
ton rs appropriate for dwellin design: YES O
Date:
Revised 6/25101
Wasnngtcn Stab Un,'mraty Energy Program
C5213:_20 3oe 60c 601
..A
FILE cop)/
PERMIT NO, M(DZO4
PROJECT NAME: C $ j� — LDS
WASHINGTON STATE VENTILATION AND
INDOOR AIR QUALITY CODE.
Mechanical ventilation criteria using prescriptive
methods for Group R Occupancies four stories and
Tess. (Group R Occupancies: Hotels, apartment houses,
congregate residences, dwellings and lodging houses.)
Each dwelling unit or guest room shall be equipped with source specific and
whole house ventilation systems.
Source specific exhaust fans are required in the following locations:
bathrooms, laundries and kitchens.
Minimum fan flow rating = 50 cfm @ 0.25 inches water gauge for bathrooms
and laundries, and 100 cfm @ 0.25 inches water gauge for kitchen exhaust fans.
❑ Locate exhaust fans on plan(s) and note fan flow performance
rating for each fan.
❑ Exhaust ducts shall be equipped with back -draft dampers.
Note this requirement on plans.
❑ All exhaust ducts located in unconditioned spaces shall
be insulated to a minimum of R -4. Note this requirement on plans.
Whole house ventilation shall be provided by a system that meets the
requirements of either:
V.I.A.Q. Section 303.4.1
ection 30 .
Section 303.4.3
Section 303.4.4
eictORIK
DATE: 2
O2.
Indicate on plans a proposed system to be used.
(Refer to attached code sections, select one, and list here:
z
1
w
00
ta
LL
w
u.
IA a
w
Z �.
i- 0
Z ~
w
O co
O —
0H
w
I-r
� o
wz
303.4 Prescriptive Whole House Ventilation Systems:
Whole house ventilation shall be provided by a system that
meets the requirements of either Section 303.4.1, 303.4.2.
303.4.3, or 303.4.4. A system which meets all of the
requirements of one of these Sections shall be deemed to
satisfy the requirements for a whole house ventilation
system.
_303.4.1 mitt
., Interent Whole House Ventilation Using
Exhaust Fans: This Section establishes minimum
prescriptive requirements for intermittent whole house
ventilation systems using exhaust fans. A system which
meets all the requirements of this Section shall be deemed
to satisfy the requirements for a whole house ventilation
system.
303.4.1.1 Whole House Ventilation Fans: Exhaust fans
providing whole house ventilation shall have a flow rating
at 0.25 inches water gauge as specified in Table 3 -2.
Manufacturers' fan flow ratings shall be determined
1 according to HVI 916 (April 1995) or AMCA 210.
303.4.1.2 Fan Noise: Whole house fans located 4 feet or
less from the interior grille shall have a sone rating of 1.5 or
less measured at 0.1 inches water gauge. Manufacturer's
noise ratings shall be determined as per HVI 915 (October
1995). Remotely mounted fans shall be acoustically
isolated from the structural elements of the building and
from attached duct work using insulated flexible duct or
other approved material.
303.4.1.3 Fan Controls: The whole house ventilation fan
shall be controlled by a 24 -hour clock timer with the
capability of continuous operation, manual and automatic
control. The 24 -hour timer shall be readily accessible. The
24 -hour timer shall be capable of operating the whole house
ventilation fan without energizing other energy- consuming
appliances. At the time of final inspection, the automatic
control timer shall be set to operate the whole house fan for
at least 8 hours a day. A label shall be affixed to the control
that reads "Whole House Ventilation (see operating
instructions)."
303.4.1.4 Exhaust Ducts: All exhaust ducts shall
terminate outside the building. Exhaust ducts shall be
equipped with back -draft dampers. All exhaust ducts in
unconditioned spaces shall be insulated to a minimum of
R4.
Effective 7/01/01
Washington State Ventilation
And Indoor Air Quality Code
303.4.1.5 Outdoor Air Inlets: Outdoor air shall be
distributed to each habitable room by individual outdoor air
inlets. Where outdoor air supplies are separated from
exhaust points by doors, provisions shall be made to ensure
air flow by installation of distribution ducts, undercutting
doors, installation of grilles, transoms, or similar means
where permitted by the Uniform Building Code. Doors
shall be undercut to a minimum of 1/2- inch above the
surface of the finish floor covering.
Individual room outdoor air inlets shall:
a. Have controllable and secure openings;
b. Be sleeved or otherwise designed so as not to
compromise the thermal properties of the wall or window in
which they are placed;
c. Provide not less than 4 square inches of net free area
of opening for each habitable space. Any inlet or
combination of inlets which provide 10 cfm at 10 Pascals as
determined by the Home Ventilating Institute Air Flow Test
Standard (HVI 901 [November 1996] ) are deemed
equivalent to 4 square inches net free area.
Inlets shall be screened or otherwise protected from entry
by leaves or other material. Outdoor air inlets shall be
located so as not to take air from the following areas:
a. Closer than 10 feet from an appliance vent outlet.
unless such vent outlet is 3 feet above the outdoor air inlet.
b. Where it will pick up objectionable odors, fumes or
flammable vapors.
c. A hazardous or unsanitary location.
d. A room or space having any fuel- burning appliances
therein.
e. Closer than 10 feet from a vent opening of a plumbing
drainage system unless the vent opening is at least 3 feet
above the air inlet.
f. Attic, crawl spaces, or garages.
EXCEPTION: Exhaust only ventilation systems do not
require outdoor air inlets if the home has a ducted forced
air heating system that communicates with all habitable
rooms and the interior doors are undercut to a minimum of
'h- inch above the surface of the finish floor covering.
303.4.3 Prescriptive Requirements for Intermittent
Whole House Ventilation Using a Supply Fan: This
Section establishes minimum prescriptive requirements for
intermittent whole house ventilation systems using an inline
supply fan. A system which meets all the requirements of
this Section shall be deemed to satisfy the requirements for
a whole house ventilation system.
303.4.3.1 Outdoor Air: Supply fan ventilation systems
shall distribute outdoor air to each habitable room through
the forced -air system ducts or through dedicated ducts to
each habitable room. Supply fans shall have the capacity to
provide the amount of outdoor air specified in Table 3 -2 at
0.40 inches water gauge as per HVI 916 (April 1995). The
outdoor air must be filtered before it is delivered to
habitable rooms. The filter may be located at the intake
device, inline with the fan, or , in the case of a connection to
the return plenum of the airhandler, using the furnace filter.
An outdoor air inlet shall be connected to either the supply
or return air stream.
303.4.3.2 Ducts: An outdoor air inlet duct connection to
the supply air stream shall be located downstream of the
forced -air system blower. An outdoor air inlet duct
connection to the return air stream shall be located at least 4
feet upstream of the forced -air system blower and its filter.
Neither type of duct shall be connected directly into a
furnace cabinet to prevent thermal shock to the heat
exchanger. The outdoor air inlet duct shall be prescriptively
sized in accordance with Table 3 -6. The terminal element
on the outside of the building shall be sized 2 inches in
diameter larger than the outdoor air inlet duct.
303.4.3.3 Dampers: The system shall be equipped with a
back -draft damper and one of the following:
1. A calibrated manual volume damper installed and set
to meet the measured flow rates specified in Table 3 -2 by
field testing with a pressure gauge and/or following
manufacturer's installation instructions; or
2. A manual volume damper installed and set to meet the
measured flow rates specified in Table 3 -2 by field testing
with a flow hood or a flow measuring station; or
Effective 7/01/01
Washington State Ventilation
And Indoor Air Quality Code
3. An automatic flow - regulating device sized to the
specified flow rates in Table 3 -2 which provides constant
flow over a pressure range of 0.20 to 0.60 inches water
gauge.
303.4.3.4 Ventilation Controls: The whole house
ventilation system shall be controlled by a 24 -hour clock
timer with the capability of continuous operation, manual
and automatic control. This will control the inline supply
fan. The 24 -hour timer shall be readily accessible. The
24 -hour timer shall be capable of operating the whole house
ventilation system without energizing other energy -
consuming appliances. At the time of final inspection, the
automatic control tinier shall be set to operate the whole
house system'for at least 8 hours a day. A label shall be
affixed to the control that reads "Whole House Ventilation
(see operating instructions)."
303.4.3.5 Ventilation Duct Insulation: All supply ducts
in the conditioned space shall be insulated to a minimum of
R-4.
303.4.3.6 Outdoor Air Inlets: Inlets shall be screened or
otherwise protected from entry by leaves or other material.
Outdoor air inlets shall be located so as not to take air from
the following areas:
a. Closer than 10 feet from an appliance vent outlet,
unless such vent outlet is 3 feet above the outdoor air inlet.
b. Where it will pick up objectionable odors, fumes or
flammable vapors.
c. A hazardous or unsanitary location.
d. A room or space having any fuel- burning appliances
therein.
e. Closer than 10 feet from a vent opening of a plumbing
drainage system unless the vent opening is at least 3 feet
above the air inlet.
f. Attic, crawl spaces, or garages.
11
1
r
' 2000 Edition
303.4.4 Prescriptive Requirements for Intermittent
Whole House Ventilation Using a He Recovery
Ventilation System: This Section establishes minimum
prescriptive requirements for intermittent whole house
ventilation using a heat recovery ventilation system.
303.4.4.1 Heat Recovery Ventilation Systems: All duct
work in heat recovery systems shall be not less than 6 inch
diameter. Balancing dampers shall be installed on the inlet
and exhaust side. Flow measurement grids shall be installed
on the supply and return. System minimum flow rating shall
be not less than that specified in Table 3 -2. Maximum flow
rates in Table 3 -2 do not apply to heat recovery ventilation
systems. ,
303.4.4.2 Ventilation Controls: The whole house
ventilation system shall be controlled by a 24 -hour clock
timer with the capability of continuous operation, manual
and automatic control. This control will control the inline
supply fan. The 24 -hour timer shall be readily accessible.
The 24 -hour timer shall be capable of operating the whole
house ventilation system without energizing other energy-
consuming appliances. At the time of final inspection, the
automatic control tinier shall be set to operate the whole
house system for at least 8 hours a day. A label shall be
affixed to the control that reads "Whole House Ventilation
(see operating instructions)."
303.4.4.3 Ventilation Duct Insulation: All supply ducts
in the conditioned space installed upstream of the heat
exchanger shall be insulated to a minimum of R-4.
303.4.4.4 Outdoor Air Inlets: Inlets shall be screened or
otherwise protected from entry by leaves or other material.
Outdoor air inlets shall be located so as not to take air from
the following areas:
a. Closer than 10 feet from an appliance vent outlet,
unless such vent outlet is 3 feet above the outdoor air inlet.
b. Where it will pick up objectionable odors, fumes or
flammable vapors.
c. A hazardous or unsanitary location.
d. A room or space having any fuel- burning appliances
therein.
e. Closer than 10 feet from a vent opening of a plumbing
drainage system unless the vent opening is at least 3 feet
above the air inlet.
12
f. Attic, crawl spaces, or garages.
SECTION 304 — MECHANICAL VENTILATION
CRITERIA AND MINIMUM VENTILATION
PERFORMANCE FOR ALL OTHER OCCUPANCIES
NOT COVERED IN SECTIONS 302 AND 303.
304.1 Ventilation: The minimum requirements for
operable area to provide natural ventilation are specified in
the Uniform Building Code (UBC) as adopted by the state
of Washington.
Where a mechanical ventilation system is installed, the
mechanical ventilation system shall be capable of supplying
ventilation air to each zone with the minimum outdoor air
quantities specified in Table 3-4.
EXCEPTION: Where occupancy density is known and
documented in the plans, the outside air rate may be based
on the design occupant density. Under no circumstance
shall the occupancies used result in outside air less than
one -half that resulting from application of Table 3-4
estimated maximum occupancy values.
The outdoor air shall be ducted in a fully enclosed path
directly to every air handling unit in each zone not provided
with sufficient operable area for natural ventilation.
EXCEPTION: Ducts may terminate within 12 inches
of the intake to an HVAC unit provided they are physically
fastened so that the outside air duct is directed into the unit
intake.
In all parking garages, other than open parking garages as
defined in UBC Section 311.9, used for storing or handling
of automobiles operating under their own power and on all
loading platforms in bus terminals, ventilation shall be
provided at 1.50 cfm per square foot of gross floor area.
The building official may approve an alternate ventilation
system designed to exhaust a minimum 14,000 cfm for each
operating vehicle. Such system shall be based on the
anticipated instantaneous movement rate of vehicles but not
less than 2.5% (or one vehicle) of the garage capacity.
Automatic carbon monoxide sensing systems may be
submitted for approval.
In all buildings used for the repair of automobiles, each
repair stall shall be equipped with an exhaust extension
duct, extending.to the outside of the building, which if over
10 feet in length, shall mechanically exhaust 300 cfm.
Connecting offices and waiting rooms shall be supplied with
conditioned air under positive pressure.
Combustion air requirements shall conform to the
requirements of Chapter 7 of the UMC.
Mechanical refrigerating equipment and rooms storing
refrigerates shall conform to the requirements of Chapter 11
of the UMC.
304.2 Alternate Systems: Alternate systems designed in
accordance with ASHRAE Standard 62.1 -1999 shall be
permitted.
Effective 7/01/01
Required Flow (CFM)
Per Table 3 -2
Minimum Smooth
Duct Diameter
Minimum Flexible
Duct Diameter
Maximum Lengthy
Maximum Number
of Elbows
50 - 80
6"
7"
20'
3
80 - 125
7"
8"
20'
3
115 - 175
8"
10"
20'
3
170 - 240
9"
11"
20'
3
Supply Fan Tested CFM at 0.40" WG
Specified Volume
from Table 3 -2
Minimum Smooth
Duct Diameter
Minimum Flexible
Duct Diameter
50 — 90 CFM
4 inch
5 inch
90 - 150 CFM
5 inch
6 inch
150 - 250 CFM
6 inch
7 inch
250 - 400 CFM
7 inch
8 inch
TABLE 3 -5
PRESCRIPTIVE INTEGRATED FORCED AIR SUPPLY DUCT SIZING
1. For lengths over 20 feet increase duct diameter 1 inch.
2. For elbows num,ering more than 3 increase duct diameter 1 inch.
TABLE 3 -6
PRESCRIPTIVE SUPPLY FAN DUCT SIZING
Washington State Ventilation
And Indoor Air Quality Code
Effective 7/01/01
17
00
to
cow
W QQ 0
LL Q .
Fl
W
D O
U
O (
0 I-
W W.
U
LL
V N ,
O
Project Name:
W ' — TUKU//L
Address: CA*1/0 4-744 s d
Residential Building Permit Number:
1. Prescriptive Option W.S.E.C. Chapter 6, (check building permit option used):
❑l. 0 1 ❑ 111. ta IV. ❑v. ❑vi. ❑vii. ❑ viii.
2. House Square Footage (HSqFt) 053
3. Heating System installed, (check system type below):
❑ a. Electric Resistance /21 BTU /h per sq. ft. RECEIVED
CITY OF TUKWILA
❑ b. Electric (forced air) /24 BTU /h per sq. ft. JAN 2 2 2002
7 c. Other Fuels (gas, heat pump) /27 BTU /h per sq. ft. PERMIT CENTER
4. Equipment:
a. Make TPA IC efP.
b. Model
c. Size in BTU's 60, 000 BTL)
5. Calculation /(HSqFt) 2 053 (see line 2 above)
BTU /h X 24 (see line 3 a, b, or c above)
55,4-31 BTU Equipment Maximum Size
PERMIT APPLICATION #:
Appligant's Sign e:
7/9/96
CITY (IF TUKWILA
Permit C.:nter
6300 Southcenter Boulevard, Suite 100, Tukwila, WA 98188
Telephone: (206) 431 -3670
Prescriptive Heating System Sizing for
Single Family Homes - New Construction
Washington State Energy Code Chapter 9, Climate Zone 1
PAUL & Z -
Date:
0/// /OZ
H -6
PERMIT NO.: A02- 014
MECHANICAL PERMIT APPLICATIONS
INSPECTIONS
1
❑ 2 Pre - construction
❑ 50 WSEC Residential
❑ 60 WA Ventilation/Indoor AQC
❑ 610 Chimney Installation /All Types
❑ 700 Framing
❑ 1080 Woodstove
❑ 1090 Smoke Detector Shut Off
Iiir 1100 Rough -in Mechanical
1101 Mechanical Equipment/Controls
1102 Mechanical Pip /Duct Insul
❑ 1105 Underground Mech Rough -in
❑ 1115 Motor Inspection
❑ 1400 Fire - Final
1800 Mechanical - Final
❑ 4015 Special -Smoke Control System
CONDITIONS
10001 No changes to plans unless approved by Bldg
Div
10002 Plumbing permits shall be obtained through King
Co
10003 Electrical permits obtained through L & I
10005 All permits, insp records & approved plans
available
❑ 10014 Readily accessible access to roof mounted
equipment
10016 Exposed insulation backing material
10019 All construction to be done in conformance
w /approved plans
10027 Validity of Permit
10036 Manufacturers installation instructions required
on site
❑ 10041 Ventilation is required for all new rooms &
spaces
10042 Fuel burning appliances
10043 Appliances, which generate....
10044 Water heater shall be anchored....
Additional Conditions:
TENANT NAME: CS-" - (�
FEES
Basic Fee (Y/N)
Supplemental Fee (Y/N)
Plan Check Fee (Y/N)
Furnace /Burner
to 100,000 BTU (qty)
Over 100,000 BTU (qty)
Floor Furnace (qty)
Suspended/Wall/Floor - mounted Heater (qty)
Appliance Vent (qty)
Heating/Refrig/Cooling Unit/System (qty)
Boiler /Compressor
to 3 HP /100,000 BTU (qty)
to 15 HP /500,000 BTU (qty)
to 30 HP /1,000,000 BTU (qty)
to 50 HP /1,750,000 BTU (qty)
over 50 HP /1,750,000 BTU (qty)
Air Handling Unit
to 10,000 cfm (qty)
over 10,000 cfm (qty)
Evaporative Cooler (qty)
Ventilation Fan (qty)
Ventilation System (qty)
Hood (qty)
Incinerator — Domestic (qty)
Incinerator — Comm /Ind (qty)
Other Mechanical Equipment (qty)
Other Mechanical Fee (enter $$)
Permit Tech:
Plan Reviewer: (I SQL. Date:
Date:
Add'1 Fees — Work w/o Permit (Y/N)
Insp Outside Normal Hours (hrs)
Reinspections (hrs)
Miscellaneous Inspections (hrs)
Add'l Plan Review (hrs)
I
PERMIT COOED COPY
PLAN REVIEW /ROUTING SLIP
ACTIVITY NUMBER: MO2 - 014 DATE: 01 -22 -02
PROJECT NAME: CBI - LOT B
SITE ADDRESS: XXX S RYAN WAY
X Original Plan Submittal Response to Incomplete Letter #
_Response to Correction Letter # Revision # After Permit Is Issued
DEPARTMENTS:
Building Division " Vr
AAV 146 IA 1 l
Public Works
DETERMINATION OF COMPLETENESS: (Tues., Thurs.)
Complete [ Incomplete
TUES /THURS ROUTING:
Please Route
Structural Review Required
APPROVALS OR CORRECTIONS: (ten days)
Approved n
CORRECTION DETERMINATION:
Approved
\PRROUTE.000
5/99
Fire Prevention
Structural
REVIEWER'S INITIALS:
Planning Division
Permit Coordinator Nitr
DUE DATE: 01-24-02
Not Applicable
Comments:
No further Review Required
REVIEWER'S INITIALS: DATE:
DUE DATE 02 -21 -02
Approved with Conditions I Not Approved (attach comments)
Approved with Conditions n Not Approved (attach comments)
DATE:
REVIEWER'S INITIALS: DATE:
DUE DATE
-- LTCENSE DETAIL INFORMATION Form Page 1 of 1
Current Filter: None
Address
Address
City
State
Zip
Phone Number
Effective Date
Expiration Date
Registration Status
Type
Entity
Specialty Code
Other Specialties
UBI Number
STATE OF WASHINGTON
DEPARTMENT OF LABOR AND INDUSTRIES
Specialty Compliance Services Division
P. O. Box 44000 Olympia, WA 98504 -4000
THE RESULT OF YOUR INQUIRY FOR LICENSE NUMBER SELECTED IS:
LICENSE DETAIL INFORMATION
Registration# or License COLUMBI033LL
Name COLUMBIA BUILDERS INC
4819 49TH AVE SW
SEATTLE
WA
98116
2069382637
6/13/97
5/22/03
ACTIVE
CONSTRUCTION CONTRACTOR
CORPORATION
GENERAL
601788046
* * *VIEW CROSS REFERENCE FILE FOR THIS LICENSE* * *
'VIEW *VIEW PRINCIPAL OWNER(S) FOR THIS LICENSE* * *
* * *VIEW CONTRACTOR BOND /SAVINGS INFORMATION * * *
'CHECK *CHECK INQUIRY FOR SUMMONS AND COMPLAINTS* * *
* * * VIEW CONTRACTOR INSURANCE INFORMATION * * *
New inquiry by CITY, NAME, PRINCIPAL OWNER NAME, NUMBER, UBI NUMBER or
return to the L &I Construction Compliance Home Page
https : / /wws2.wa.gov /lni/bbip /TF2Form .asp ?License= COLUMBI033LL 05/30/2002