HomeMy WebLinkAboutPermit M02-016 - 7-ELEVENThis record contains information which is exempt from public disclosure
pursuant to the Washington State Public Records Act, Chapter 42.56 RCW
as identified on the Digital Records Exemption Log shown below.
M02 -016
7- Eleven
14207 Tukwila International Boulevard
RECORDS DIGITAL D- ) EXEMPTION LOG
THE ABOVE MENTIONED PERMIT FILE INCLUDES THE FOLLOWING REDACTED INFORMATION
Page # tode Exemption = 8rlef Explanatory DeSclriptiop �t�tutel ule
The Privacy Act of 1974 evinces Congress'
intent that social security numbers are a private
concern. As such, individuals' social security
Personal Information —
numbers are redacted to protect those
Social Security Numbers
individuals' privacy pursuant to 5 U.S.C. sec.
5 U.S.C. sec.
DR1
Generally — 5 U.S.C. sec.
552(a), and are also exempt from disclosure
552(a); RCW
552(a); RCW
under section 42.56.070(1) of the Washington
42.56.070(1)
42.56.070(1)
State Public Records Act, which exempts under
the PRA records or information exempt or
prohibited from disclosure under any other
statute.
Redactions contain Credit card numbers, debit
card numbers, electronic check numbers, credit
Personal Information —
expiration dates, or bank or other financial
RCW
14
DR2
Financial Information —
account numbers, which are exempt from
42.56.230(5)
RCW 42.56.230(4 5)
disclosure pursuant to RCW 42.56.230(5),
except when disclosure is expressly required by
or governed by other law.
7- ELEVEN
STORES
CANCELLED
M02-01 6
City of 'i`ukwila
Department of Community Development / 6300 Southcenter BL, Suite 100 / Tukwila, WA 98188 / (206) 431 -3670
Parcel No.: 1610000295 Permit Number: MO2 -016
Address: 14207 TUKWILA INTERNATIONAL BL TUKW Issue Date: 01/31/2002
Suite No: Permit Expires On: 07/30/2002
Tenant:
Name: 7- ELEVEN STORE
Address: 14207 TUKWILA INTERNATIONAL BL, TUKWILA, WA
Owner:
Name: FRICK ANDREW A & JEANETTE F
Address: 2 LOCH LANE, TACOMA WA
Contact Person:
Name: JESSIE LONGMAN
Address: 902 N 127, SEATTLE, WA
Contractor:
Name: PRO STAFF MECHANICAL INC
Address: PO BOX 33370, SEATTLE WA
Contractor License No: PROSTMI072NG
DESCRIPTION OF WORK:
INSTALL REFRIGERANT LINE BETWEEN NEW SLURPEE MACHINE AND CONDENSER FANS ON ROOF
Value of Construction:
Type of Fire Protection:
Permit Center Authorized Signature:
Signature:
Print Name:
doc: Mech
$4,000.00
N/A
MECHANICAL PERMIT
Fees Collected:
Uniform Mechnical Code Edition:
I hereby certify that I have read and examined this permit and know the same to be true and correct. All provisions of law and
ordinances governing this work will be complied with, whether specified herein or not.
The granting of this permit does not presume to give authority to violate or cancel the provisions of any other state or local laws
regulating construction or the perfor ce of work. I am authorized to sign and obtain this mechanical permit.
-0 Cxp
Phone: (206)000 -0000
Phone: 206 361 -0071
Phone: 206 - 361 -0071
Expiration Date: 06/30/2002
�zlw , . Date: /
Date: / • 3 /
$84.50
1997
This permit shall become null and void if the work is not commenced within 180 days from the date of issuance, or if the work is
suspended or abandoned for a period of 180 days from the last inspection.
MO2 -016
Printed: 01 -31 -2002
Signature:
Print Name:
doc: Conditions
City of l'ukwila
% JT.55ti
PERMIT CONDITIONS
Department of Community Development / 6300 Southcenter BL, Suite 100 / Tukwila, WA 98188 / (206) 431 -3670
Parcel No.: 1610000295 Permit Number: MO2 -016
Address: 14207 TUKWILA INTERNATIONAL BL TUKW Status: ISSUED
Suite No: Applied Date: 01/22/2002
Tenant: 7- ELEVEN STORE Issue Date: 01/31/2002
1: ** *BUILDING DEPARTMENT * **
2: Electrical permits shall be obtained through the Washington State Division of Labor and Industries and all electrical work will be
inspected by that agency
(248- 6630).
3: No changes will be made to the plans unless approved by the Engineer and the Tukwila Building Division.
4: All permits, inspection records, and approved plans shall be available at the job site prior to the start of any construction. These
documents are to be
maintained and available until final inspection approval is granted.
5: Readily accessible access to roof mounted equipment is required.
6: All construction to be done in conformance with approved plans and requirements of the Uniform Building Code (1997 Edition) as
amended, Uniform Mechanical Code
(1997 Edition), and Washington State Energy Code (1997 Edition).
7: Manufacturers installation instructions required on site for the building inspectors review.
8: Validity of Permit. The issuance of a permit or approval of plans, specifications, and computations shall not be con- strued to be a
permit for, or an approval
of, any violation of any of the provisions of the building code or of any other ordinance of the jurisdiction. No permit presuming to
give authority to violate
or cancel the provisions of this code shall be valid.
I hereby certify that I have read these conditions and will comply with them as outlined. All provisions of law and ordinances
governing this work will be complied with, whether specified herein or not.
The granting of this permit does not presume to give authority to violate or cancel the provision of any other work or local laws
regulating construction or the perforn ce of work.
Date: / 31 4 oz.
MO2 -016 Printed: 01 -31 -2002
re W
UO
u O
CO 11J
CO IL
WO
1 a
Z
W ui
p '
U
0-
D
1-
111 ul
U. O
t
0—
O
z
Project Name/Tenant: 7 // S „�,�
/
R'OR AUTHORI ED'AGENTi`
Value of Aa
� E�u�ment:
Site Address
City State/Zip:
So
Tax Parcel Number:
/( /o40 —0,
:
l �4- 20 /r�A9
Property Owner: —
Phone: ( )
Fax #:
Street , dress: �Q �-
fox i.M � 9 1
City State/Zip:
--
Fax #: ( )
City /State/Zip3E
Contractor: _ � ^ r
Phone: (204)
36/_ Den 7(
Street Address /�D� A/ /27 � � i f; tat j�ip:
IAA
Fax #: ( / )
l �4zzi
Contact Persop� s %� I A/ /
��/""��'' 9�/
Phone: ( )
SCI 1r-tl~
Street Address: r M.-
City State/Zip:
Fax #: ( )
Of
:BUILDING:'OW
R'OR AUTHORI ED'AGENTi`
Signature:
Date:
/, z-z__
Print name: /
ik.ki.- Wd (4../E
Phone: (Z ) 5'6/
Fax #:
e0(s) f4 /�4Z
Address: D
30 ' 33 7D
City /State/Zip3E
CITY OF TI `:WILA
Permit Center
6300 Southcenter Boulevard, Suite 100
Tukwila, WA 98188
(206) 431 -3670
F t STAFF USE ONLY
Project Number:
Permit Number:
mop -COD
Mechanical Permit Application
Application and plans must be complete in order to be accepted for plan review.
Applications will not be accepted through the mail or facsimile.
MECHANICAL PERMIT: :REVIEW.AND APPROVAL. REQUESTED: (TO BE FILLED OUT BY APPLICANT)
Description of work to be done (please be specific):
%3E /wEFeLi JvEzv sL EE
Current copy of Washington State Department of Labor and Industries Valid Contractor's License. If not available at the time of
application, a copy of this license will be required before the permit is issued OR submit Form H-4, "Affidavit in Lieu of Contractor
Registration ".
Building Owner /Authorized Agent: If the applicant is other than the owner, registered architect/engineer, or contractor licensed by the
State of Washington, a notarized letter from the property owner authorizing the agent to submit this permit application and obtain the
permit will be required as part of this submittal.
I HEREBY CERTIFY THAT I HAVE READ AND EXAMINED THIS APPLICATION AND KNOW THE SAME TO BE TRUE UNDER
PENALTY OF PERJURY 81' THE LAWS OF THE STATE OF WASHINGTON, AND I AM AUTHORIZED TO APPLY FOR THIS PERMIT.
Expiration of Plan Review - Applications for which no permit is issued within 180 days following the date of application shall expire by
limitation. The building official may extend the time for action by the applicant for a period not exceeding 180 days upon written
request by the applicant as defined in Section 114.4 of the Uniform Mechanical Code (current edition). No application shall be
extended more than once.
Date application accepted:
'sig v•0t
Date application expires:
Application taken by: (initials)
11/1/99
rucch pennli.doc
✓
Submittal Requirements
Floor plan and system layout
Roof plan required to identify individual equipment and the location of each installation (Uniform
Mechanical Code 504 (e))
Details and elevations (for roof mounted equipment) and proposed screening
Heat Loss Calculations or Washington State Energy Code Form #H -7
•
H.V.A.C. over 2,000 CFM (approximately 5 ton and larger) must be provided with smoke detection shut-
off and will be routed to the Fire Prevention division for additional comments (Uniform Mechanical
Code 1009).
Specifications must be provided to show that replacement equipment complies with the efficiency ratings
and other applicable requirements of the Washington State Nonresidential Energy Code.
Structural engineer's analysis is required for new and the replacement of existing roof equipment
weighing 400 pounds and greater (Uniform Building Code 1632.1). Structural documentation shall be
stamped by a Washington State licensed Structural Engineer.
Mechanical Permits
COMMERCIAL: Two complete sets of drawings and attachments required with application submittal
NOTE: Water heaters and vents are included in the Uniform Mechanical Code — please include any water
heaters or vents being installed or replaced.
RESIDENTIAL: Two complete sets of attachments required with application submittal
Submittal RequiremOnts
New Single Family Residence
Heat loss calculations or Form H -6.
Equipment specifications.
Change -out or replacement of existing mechanical equipment
1 Narrative of work to be done, including modification to duct work.
Installation of Gas Fireplace
Narrative with specification of equipment and chimney type.
If using existing chimney, provide a letter by a certified chimney sweep stating that the chimney is in safe
condition.
NOTE: Water heaters and vents are included in the Uniform Mechanical Code — please include any water .
heaters or vents being installed or replaced.
11/2/99 . AZ
reiscpnu.doc
TRANSACTION LIST:
ACCOUNT ITEM LIST:
doc: Receipt
City of Tukwila
6300 Southcenter BL, Suite 100 / Tukwila, WA 98188 / (206) 431 -3670
Payee: PRO STAFF MECHANICAL
Amount
Payment Check 6581
Current Pmts
MECHANICAL - NONRES
PLAN CHECK - NONRES
RECEIPT
Parcel No.: 1610000295 Permit Number: MO2 -016
Address: 14207 TUKWILA INTERNATIONAL BL TUKW Status: APPROVED
Suite No: Applied Date: 01/22/2002
Applicant: 7- ELEVEN STORE Issue Date:
Receipt No.: R020000134 Payment Amount: 84.50
Initials: SKS Payment Date: 01/31/2002 03:52 PM
User ID: 1165 Balance: $0.00
Type Method Description
84.50
Description Account Code
000/322.100 67.60
000/345.830 16.90
Total: 84.50
3244 02/01 1716 TOTAL 338.00
Printed: 01 -31 -2002
z
�U
U
U)
u) W
U) w
ww O :
LL Q:
to
r L
wW
'U
'O -.
LUi 0H
- 4
11 0
w Z.
1
is
•
REMOTE CONDENSER / LINE SET
INSTALLATION GUIDE
MODEL CR1201
[LEVU]
SEPARATE PERMIT
REQUIRED FOR:
0 MECHANICAL
VELECTRICAL
*PLUMBING
LGAS PIPING
CITY OF TUKWILA
BUILDING DIVISION
Permit No.
CITY OF TUKWILA
APPROVED
JAN 25 In')
AS :1)
DIVISLO.N
• 111. 0
MECHANICAL INC.
P.O. BOX 33370
SEATTLE, WA 98133
206-361-0071
FILE. COPY
I understand that the Plan Check approvals are
subject to errors and omissions and approval of
plans does not authorize the violation of any
adopted code or ordinance. Receipt of con-
ctor's copy of approved plans acknowledged.
RECEIVED
CITY OF TUKWILA
JAN 2 2 2002
PERMIT CENTER
ro
..: WITHOUT ),1
,•„:1,,9,?'t_ OP Itx?Clfc.;t4 etilDwa
. . ,-• F 7-, '—'-;'" IfilLi h:"LnA6 A NE PV
One Cornelius Place LAi S t. f El.',:'17,c•
IMI CORNELlus
$.k...J kiii" Ji..1.L) W :JE ADDIIICIAL PLAN REVIEW FLr a 4.
Anoka, MN 55303
Tel: 1-808-248-5568 / 630-539-5050
Fax: 1-800-344-3801 / 630-539-6960
Pail No. ?????????
Rev. A 12/01
C ��� Model CR800, CR1200, CR1400
Technical Specifications:
Refrigerant: II-404a
Circuit Capacity: 20A
Maximum fuse size: 20A (HVac circuit breaker required)
Electrical rating:
CR800 /CR1200 /CR1400: 208/230 volts, 60 Hz.
(single phase) 2.0 Amps
CR800E50/CR1200E50: 220 volts, 50 Hz.
(single phase) 2.0 Amps
Condenser finish: Galvanized
Total pressure drop: 6.4 kg
Vertical drop: 15' max. (4.6 m)
Vertical lilt: 35' max. (10.7 m)
Maximum length: 55' (16.8 m)
Tube size (1): 3/8 O.D. (3 ctn)ti:,
Remote tubing kits optional:
20'(6.1 m), 35' (10.7 m), 55' (16.7 m)
Weight:
CR800: 90 lbs. (41 kgs.)
CR1200: 105 lbs. (40 kgs.)�
CR1400: 115 lbs. (52 kgs. �
Shipping weight:
CR800: 100 lbs. (45 kgs.)
CR1200: 115 lbs. (52 kgs.)
CR1400: 130 lbs. (59 kgs.)
Agency Listings:
CC7
K) 1999 IMI Cornelius
For more inlorniallon or 10
place an order, conlacl
your safes repretenlallve
ur authorized dislribulor.
In the US:
Phono: 1.000.236.3600
Fax: 1.900. 535.4235
Outside the US:
Phono: 1. 612.421.6120
Fax: 1. 612. 422.3297
Ain rLow
our
i()
3 AEn000IP
OUTET FITTING
1r24N. AEROOUIP
INLET FITTING
•11.4
ELECTfICAL SERVICE
OPENING 7 /8 4N.
AIR FLOW
IN
Ain FLOW
IN
-AIR FLOW
IMI Cornelius Inc.
One Cornelius 1'ince
Anoka, M1 55303-023.1
USA
v O
coo
NW
cow
W O
to 3
d
W;
z
Z 0
uj
p `
U
0 1—
Wuj
V
li't
O
REAR OF PINNAC
ANNIMNIM
NIONNINNI
.r
�wr
I.
CAD NET
INNIMP
THE EXCESS LINE SHOULD
BE COILED HORIZONTALLY
IN A LARGE DIAMETER AND
STORE UNDER THE CONDENSER
FLEXIBLE
ANCHOR THE LAST 6' OF
FLEXIBLE LINE TO THE WALL
NEAR THE SOLDER JOINT.
ANY REMAINING LENGTH
24.IN.
20 -FEET
MAXIMUM
r'
Important: The condensing unit and line set are scaled and pressurized. Care must be taken
during installation to prevent injury!
Condensiini Unit:
Line Set:
Refer to the drawing on page 3.
When determining the proper location for the condensing unit, remember that heat is rejected
from the unit during normal operation. The unit should be placed where this heat does nut aired
nearby objects.
Minimize the elevation oldie unit (a maximum elevation of 20 feet above the 1CB machine is
recommended). Avoid locating the condensing unit at an elevation below the PCB machine.
This is especially important during winter months. Locate the condensing unit such that airflow
through the condenser is not restricted. Interference from nearby objects must not impede the
performance of the unit. Mount the condensing unit to the roof top in accordance to your local
building and electrical codes.
Uncoil the line set only as necessary while routing. if equipped with a flexible end, make sure it
is located indoors at the FCI3 machine and not at the condensing unit. Keep the lines as straight
as possible while routing to avoid creating unnecessary traps. Care must be taken when bending
the lines to prevent kinks. Coil excess line indoors if possible. Minimize the number of coils,
and lay the coils horizontally if possible.
Making Connections:
Take the following steps when making connections. Note that disconnecting the couplings alter
installation will result in refrigerant leakage.
1) Remove protector caps and plugs.
2) If necessary, carefully wipe coupling seats and threaded surfaces with a clean cloth to
prevent the intoduction ofdirt or any foreign material in the system.
3) Lubricate the male half diaphragm and synthetic rubber seal with the refrigerant oil supplied
with the line set. Thread coupling halves together by hand to insure proper stating of
threads. Use proper size wrenches (on coupling body hex and on union nut) and tighten until
coupling bodies "bottom" or a definite resistance is felt.
4) Using a starker or ink pen, stark a line lengthwise from the coupling union nut to the
bulkhead. 'then tighten an additional 1/4 turn; the misalignment of the line will show the
amount the coupling has been tightened. This final '/a turn is necessary to insure the
formation of a leak proof joint. Ira torque wrench is used, torque the " -6" coupling size to
10 -12 Ft. Lbs. and the " -11" coupling size to 35 -45 ht. Lbs.
5) Leak check all connections.
2
PRO-STAFF®
PROJECT: LU R PE C RQOFT P UN ITS
Cook)
SAE?
• • • FOR YOUR HEATING,
AIR CONDITIONING &
REFRIGERATION NEEDS
PRO -STAFF MECHANICAL INC.
P.O. BOX 33370, SEATTLE, WA 98133 (206) 361 -0071 FAX: 361 -0424
PLEASE VISIT OUR WEBSITE AT www.pro- staffinechanical.com
COMMERCIAL HVAC CONTRACTORS
SYSTEM DESIGN & INSTALLATION
SHEET METAL FABRICATION
24 HOUR EMERGENCY SERVICE
PREVENTIVE MAINTENANCE
DATE:
•
Wi Fi�ND (Z; l�Pr itt►�...
X 6 � Prc.ESS✓2z,Eb •
F n-t r 'rf c-
F;LINE
h
Rob 1- vl2 E
SITE
■
w w
cow
NO
m u.
1
2
LL
z
O
w
0 0 .
ON
01-•
ILI l a
I — F Ur -
LL
W Z
0
0 I
z
1
46 '
7_// S- o2-5
5 x 36tt C, u LA1-1 /7f? ??? l / ? rf r s t !Sir's 5" I
STORE �2o�►
c
N E4IS_Z
6LUCAt -1 fT _r.T,I.rr / .Crfflf.c1/.rf
78"
,,:fm <c4.° F. `....`C l eye (el,rt,,.. ,...' (jSUL /V T7491J 44-1,..; 4, ',,' e.
7& _le IS -rS
24''o. .
SEA Ds-(�1 iL
•
I 11
p 4 7,
Y
1
3,0"
CLC
Ladm i 1lGYSl'T..XZSL^ifGVl'.a1`s...ES t['4txh. a ii n eliv: ±.::lfVnl"1mnrs 577i7SSCi1E zr-
CITY OF TUKWILA
TREASURERS CHECK
6200 SOUTNCENTER BLVD 206- 433 -1835
TUKWILA, WA 98188
to f ro Staff Mec i vi ica
e L Ltrd xfq -two ar 24 /rob
wwwk.00m
bank.
FOR %v.Qexnrt. fee ref - Ofl
7- 16 -0a. DATE
MAC14 ?w -s Weik .
5 tiblialAi 4.14A4 t ' 'l s fesD 'fo 'D*' Mu
-PoY Mod -o`0 :. o
1940/12503390
1$1622.2_4 —
DOLLARS 8�
W
re
6
2
0 O
CO O
W =
J F-
CO u_
W
2
g
co 3
I- W
Z
o
W
UO
O
O I-
= W
1-
LLO
w Z
U
0
z
1
June 13, 2002
TO: Laurie Anderson
FR: Brenda Holt
RE: Refund
Thank you.
Bob Benedicto, Acting
city of Tukwila
Department of Community Development Steve Lancaster, Director
Please refund the amount of $162.24, which is 80% of the permit fees for permits MO2 -016, MO2 -017
and MO2 -024. These permits were cancelled by the applicant. Copies of the receipts are attached.
Please forward the check to me.
ing Official
ate
Steven M. Mullet, Mayor
6300 Southcenter Boulevard, Suite #100 • Tukwila, Washington 98188 • Phone: 206 - 431 -3670 • Fax: 206 - 431 - 3665
--- - 70N-12 -2002 11:4?
STATUS:
PRO -STAFF MECHANICAL
PRO -STAFF
MECHANICAL INC.
To' Mr. Bob Benedicto
Message:
City of Tukwila
CI FOR SIGNATURE;
TELELPHONE: (201) 31141071
PAX (206) 211-0424
PLEASE VISIT OUR WEB SITE AT
www.pro- staffinechanical.00m
JUN 1 2 2002
co vn :1 NM'
DEN/ ELO'PMEN 1
DOCUMENT TRANSMITTAL
Date 06/12/02
206 361 0424 P.01'04
Offices/Shop
902 North 127 ST.
Correspondence to:
PO Box 33370
Seattle, WA. 98133
From: Jesse Longman
j ssealpro-staffinechanical.com
Project Permit #: MO2 -016, MO2 -024 &
MO2 -017
SENT VIA: ® FAX; (208) 431- 3885,( 4) Total Pages; (NAIL; ❑HAND DELIVER; POTHER:
Copies:
Description of items:
FOR APPROVAL; ❑FOR YOUR RECORDS;
The above mentioned projects were canceled by the owner. I would like to request that a refund for
the permit fees be mail back to us.
Thank youl
Jesse Longman
Pro -Staff Mechanical
COMMERCIAL HVAC CONTRACTORS
SYSTEM DESIGN a INSTALLATION
SHEET METAL FABRICATION
24 HOUR EIYERGENCY SERVICE
PREVENTIVE MAINTENANCE
TUKWILA BUILDING DIVISION
DEPARTMENT OF COMMUNITY DEVELOPMENT
MEMORANDUM
DATE: June 12, 2002
TO: Stephania S. ti
FROM: Bob B. { a
RE: Mech. Permits 02 -116, MO2 -024 & MO2 -017
Please verify the permit fees and refund 80% to Pro -Staff Mechanical.
z
re W
00
coo
W
N LL
w
u.
co 3
z
HO
z
w
w
v
O-
o F-
w W
u.
W z
U =
O H
z
I
ACTIVITY_ NUMBER: MO2 -016
PROJECT NAME: 7- ELEVEN STORE
SITE ADDRESS: 14203 PACIFIC HIGHWAY SOUTH
X Original Plan Submittal
Response to Correction Letter #
DATE: 01 -23 -02
Response to Incomplete Letter #
Revision # After Permit Is Issued
DEPARTMENTS:
Buildin Division d
-24-0 n
Public Works
Complete
DETERMINATION OF COMPLETENESS: (Tues., Thurs.)
TUES /THURS ROUTING:
Please Route
PERMIT COORp
PLAN REVIEW /R SLIP
Incomplete
Structural Review Required
APPROVALS OR CORRECTIONS: (ten days)
Approved n Approved with Conditions
6
Fire �Pr 7 n
( n 1 -07--
Structural
\PRROUTE.DOC
5/99
CORRECTION DETERMINATION:
Approved ri Approved with Conditions n
REVIEWER'S INITIALS:
Comments:
REVIEWER'S INITIALS:
REVIEWER'S INITIALS:
PERMIT COORD COPY
Planning Division
Permit Coordinator
DUE DATE: 01-24-02
Not Applicable
No further Review Required
DATE:
DUE DATE 02 -21 -02
DUE DATE
Not Approved (attach comments)
DATE:
Not Approved (attach comments)
DATE:
0
ACTIVITY NUMBER: MO2 -016 DATE: 01 -23 -02
PROJECT NAME: 7- ELEVEN STORE
SITE ADDRESS: 142071 PACIFIC HIGHWAY SOUTH
X ; Original Plan Submittal Response to Incomplete Letter #
Response to Correction Letter #,
Revision #
After Permit Is Issued
DEPARTMENTS:
Building Division
Public Works
DETERMINATION OF COMPLETENESS: (Tues., Thurs.)
Complete
Comments:
TUES /THURS ROUTING:
Please Route
REVIEWER'S INITIALS: DATE:
APPROVALS OR CORRECTIONS: (ten days)
Approved
Approved
\PRROUTE.DOC
5/99
REVIEWER'S INITIALS:
CORRECTION DETERMINATION:
PLAN REVIEW /ROUTING SLIP
n
Fire Prevention
Structural
StructuraI Review Required
Approved w Conditions
C k.....-
Incomplete n Not Applicable
Approved with Conditions
DATE:
Planning Division
Permit Coordinator
DUE DATE: 01 -24-02
No further Review Required
DUE DATE 02 -21 -02
Not Approved (attac comme
Not Approved (attach comments)
REVIEWER'S INITIALS: DATE:
DUE DATE
l l
PERMIT NO.: M O Z • OI U
MECHANICAL PERMIT APPLICATIONS
INSPECTIONS
❑ 2 Pre - construction
❑ 50 WSEC Residential
❑ 60 WA Ventilation /Indoor AQC
❑ 610 Chimney Installation /All Types
❑ 700 Framing
❑ 1080 Woodstove
1090 Smoke Detector Shut Off
1100 Rough -in Mechanical
1101 Mechanical Equipment/Controls
❑ 1102 Mechanical Pip/Duct Insul
❑ 1105 Underground Mech Rough -in
❑ 1115 Motor Inspection
1400 Fire - Final
1800 Mechanical - Final
❑ 4015 Special -Smoke Control System
CONDITIONS
Afti
•
10001 No changes to plans unless approved by Bldg
Div
❑ 10002 Plumbing permits shall be obtained through King
Co
10003 Electrical permits obtained through L & I
10005 All permits, insp records & approved plans
available
10014 Readily accessible access to roof mounted
equipment
10016 Exposed insulation backing material
10019 All construction to he done in conformance
w /approved plans
10027 Validity of Permit
10036 Manufacturers installation instructions required
on site
10041 Ventilation is required for all new rooms &
spaces
10042 Fuel burning appliances
10043 Appliances, which generate.
Water heater shall be anchored....
Additional Conditions:
TENANT NAME: ?' ~1 vs /y
FEES
Basic Fee (Y/N)
Supplemental Fee (Y/N)
Plan Check Fee (Y/N)
Furnace /Burner
to 100,000 BTU (qty)
Over 100,000 BTU (qty)
Floor Furnace (qty)
Suspended/Wall /Floor- mounted Heater (qty)
Appliance Vent (qty)
Heating/Refrig/Cooling Unit/System (qty)
Boiler /Compressor
to 3 HP/ 100,000 BTU (qty)
to 15 HP /500,000 BTU (qty)
to 30 HP /1,000,000 BTU (qty)
to 50 HP /1,750,000 BTU (qty)
over 50 HP /1,750,000 BTU (qty)
Air Handling Unit
to 10,000 cfm (qty)
over 10,000 cfm (qty)
Evaporative Cooler (qty)
Ventilation Fan (qty)
Ventilation System (qty)
Hood (qty)
Incinerator — Domestic (qty)
Incinerator — Comm /Ind (qty)
Other Mechanical Equipment (qty)
Other Mechanical Fee (enter $$)
Add'l Fees — Work w/o Permit (Y/N)
Insp Outside Normal Hours (hrs)
Reinspections (hrs)
Miscellaneous Inspections (hrs)
Add'I Plan Review (hrs)
Plan Reviewer:
Date:
Permit Tech: 1- Date:
1
Please Route
ACTIVITY NUMBER: MO2 - 016 DATE: 01 -23 -02
PROJECT NAME: 7- ELEVEN STORE
SITE ADDRESS: 14207 PACIFIC HIGHWAY SOUTH
X Original Plan Submittal Response to Incomplete Letter #
Response to Correction Letter#
Revision # After Permit Is Issued
DEPARTMENTS:
Building Division
Public Works
Complete
\PRROUTE.DOC
5/99
PLAN REVIEW /ROUTING SLIP
n
n
DETERMINATION OF COMPLETENESS: (Tues., Thurs.)
TUES /THURS ROUTING:
REVIEWER'S INITIALS:
Fire Prevention
Structural
Incomplete
Structural Review Required
APPROVALS OR CORRECTIONS: (ten days)
CORRECTION DETERMINATION:
Approved El Approved with Conditions ri
REVIEWER'S INITIALS:
n
Planning Division
Permit Coordinator
DUE DATE: 01-24-02
Not Applicable
DUE DATE 02 -21 -02
Approved n Approved with Conditions n Not Approved (attach comments)
Comments:
No further Review Required
DATE: l
INITIALS: DATE:
DUE DATE
Not Approved (attach comments) ri
DATE: