HomeMy WebLinkAboutPermit PG07-248 - JOHNSON RESIDENCEJOHNSON RESIDENCE
11866 44 PL S
PGO7-248
Parcel No.: 3347400785
Address:
Suite No:
Tenant:
Name:
Address:
11866 44 PL S TUKW
City .1 Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206 -431 -3670
Fax: 206 -431 -3665
Web site: http: / /www.ci.tukwila.wa.us
JOHNSON RESIDENCE
11866 44 PL S , TUKWILA WA
Owner:
Name: JOHNSON VERDAYNE & JALON D
Address: 11744 44TH PL S , TUKWILA WA
Contact Person:
Name: VERDAYNE JOHNSON
Address: 11840 44 PL S , TUKWILA WA
Contractor:
Name: OWNER AFFIDAVIT - JALON JOHNSON
Address:
Contractor License No:
DESCRIPTION OF WORK:
PLUMBING FOR NEW 2829 SF SFR
Value of Plumbing /Gas Piping:
Fees Collected:
Plumbing
Bathtub or combination bath/shower
Bidet
Clothes washer, domestic
Dental unit, cuspidor
Dishwasher, domestic, with independent drain
Drinking fountain or water cooler (per head)
Food -waste grinder, commercial
Floor drain
Shower, single head trap
Lavatory
Wash fountain
Receptor, indirect waste
Sinks
Urinals
Water Closet
doc: UPC -10/06
$1,000.00
$301.00
FIXTURE TYPE AND OUANTITY
* *continued on next page **
PLUMBING /GAS PIPING PERMIT
Permit Number:
Issue Date:
Permit Expires On:
Expiration Date:
Phone:
Phone: 206 954 -8185
Phone:
PGO7 -248
12/21/2007
06/18/2008
Uniform Plumbing Code Edition: 2006
International Fuel Gas Code Edition: 2006
Plumbing (cont.)
2 Building sewer and each trailer park sewer 1
0 Rain water system - per drain (inside bldg) 0
0 Water heater and/or vent 1
0 Industrial waste treatment interceptor, including
1 its trap and vent, except for kitchen type
0 grease interceptors 1
0 Repair or alteration of water piping and/or water
0 treatment equipment 0
1 Repair or alteration of drainage or vent piping 0
8 Medical gas piping system serving (1 -5)
0 inlets /outlets for a specific gas 0
0 Medical gas piping (6 +) inlets /outlets 0
1 Gas Piping
3 Gas piping outlets (0-5) 3
0 Gas piping outlets (6 +) 0
PG07 -248 Printed: 12 -21 -2007
Permit Center Authorized Signature:
Signature:
doc: UPC -10/06
(A .
City coYTukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206 - 431 -3670
Fax: 206 -431 -3665
Web site: http: / /www.ci.tukwila.wa.us
I I
Print Name: JO I 0 h J �AIN Y\ S U''•
Permit Number: PG07 -248
Issue Date: 12/21/2007
Permit Expires On: 06/18/2008
Date: 1
I hereby certify that I have read and e - ed this permit and know the same to be true and correct. All provisions of law and ordinances
governing this work will be complied • whether specified herein or not.
The granting of this permit does not pr a to give authority to violate or cancel the provisions of any other state or local laws regulating
construction o tk a pgrformance of w9 1 m authorized to sign and obtain this plumbing /gas piping permit.
Date: ' O- oC `-6
This permit shall become null and void if the work is not commenced within 180 days from the date of issuance, or if the work is suspended
or abandoned for a period of 180 days from the last inspection.
PG07 -248 Printed: 12 -21 -2007
Parcel No.: 3347400785
Address:
Suite No:
Tenant:
11866 44 PL S TUKW
JOHNSON RESIDENCE
1: ** *PLUMBING AND GAS PIPING * **
City of Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206 - 431 -3670
Fax: 206 -431 -3665
Web site: http: / /www.ci.tukwila.wa.us
PERMIT CONDITIONS
Permit Number:
Status:
Applied Date:
Issue Date:
PGO7 -248
ISSUED
09/20/2007
12/21/2007
2: No changes shall be made to applicable plans and specifications unless prior approval is obtained from the Tukwila
Building Division.
3: All permits, inspection records and applicable plans shall be maintained at the job and available to the plumbing
inspector.
4: All plumbing and gas piping systems shall be installed in compliance with the Uniform Plumbing Code and the Fuel Gas
Code.
5: No portion of any plumbing system or gas piping shall be concealed until inspected and approved.
6: All plumbing and gas piping systems shall be tested and approved as required by the Plumbing Code and Fuel Gas Code.
Tests shall be conducted in the presence of the Plumbing Inspector. It shall be the duty of the holder of the permit to
make sure that the work will stand the test prescribed before giving notification that the work is ready for inspection.
7: No water, soil, or waste pipe shall be installed or permitted outside of a building or in an exterior wall unless,
adequate provision is made to protect such pipe from freezing. All hot and cold water pipes installed outside the
conditioned space shall be insulated to minimum R-3.
8: Plastic and copper piping running through framing members to within one (1) inch of the exposed framing shall be
protected by steel nail plates not less than 18 guage.
9: Piping through concrete or masonry walls shall not be subject to any load from building construction. No plumbing
piping shall be directly embedded in concrete or masonry.
10: All pipes penetrating floor /ceiling assemblies and fire- resistance rated walls or partitions shall be protected in
accordance with the requirements of the building code.
11: Piping in the ground shall be laid on a firm bed for its entire length. Trenches shall be backfilled in thin layers to
twelve inches above the top of the piping with clean earth, which shall not contain stones, boulders, cinderfill,
frozen earth, or construction debris.
12: The issuance of a permit or approval of plans and specifications shall not be construed to be a permit for, or an
approval of, any violation of any of the provisions of the Plumbing Code or Fuel Gas Code or any other ordinance of the
jurisdiction.
doc: Cond -10/06
* *continued on next page **
PG07 -248 Printed: 12 -21 -2007
Print Name: 1 C.A.` U tJ 'C)\(\ K\ SG 1/1
doc: Cond -10/06
City of Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206 -431 -3670
Fax: 206 -431 -3665
Web site: http: / /www.ci.tukwila.wa.us
I hereby certify that I have read these conditions and will comply with them as outlined. All provisions of law and ordinances governing
this work will be complied with, whether specified herein or not.
The granting of this permit does not presume to give authority to violate or cancel the provision of any other work or local laws regulating
construction or the performance of work.
Signature: ! Date: 1
PG07 -248 Printed: 12 -21 -2007
CITY OF TUKWILA
Community Development Department
Public Works Department
Permit Center
6300 Southcenter Blvd., Suite 100
Tukwila, WA 98188
http: / /www. ci. tukwila. wa. us
Site Address:_ 101 4 411119 I) •
Tenant Name:
Property Owners Name:V i1 e_ ` l V h h S v'
Mailing Address: i t 40 44 t'+ Pl_ Su - 1 (y t ( A✓�
City
Name: 1/-46 iq#t- 71 5 n
Mailing Address: /f 0 4a-1nl it. Sr
City State Zip
E -Mail Address: Fax Number: 74 — ?07 3
GENERAL CONTRACTORINFORMATION
(Contractor Information for Mechanical (pg 4) forrPlu'mbing and Gas taping (pg
Company Name:
Mailing Address:
Contact Person: et ,P`J4 ja'z•
E -Mail Address: ff
Contractor Registration Number:
ARCHITECT OF RECORD All plans must be wet stamped by Architect of Recor
Company Name- ` /"
Mailing Address: r 4ft 3 fi fj c H,v y E S f -k
Contact Person: /CGl .50.> "
E -Mail Address:
N GINEER O F R All plans must be wet ~stamped by Engineer.of Recor
Company Name: Mickfr
Mailing Address: ,t SUS- /Wad /¼ >V?
114L 2 04 a Pt hex',
Contact Person:
E -Mail Address:
Q:Uppliations\Porms- Applications On Line\3 -2006 - Permit Applicstion.doe
Revised: 9 -2006
bh
Applications and plans must be complete in order to be accepted for plan review.
Applications will not be accepted through the mail or by fax.
**Please Print**
King Co Assessor's Tax No.: 3 3 y `7)0 7£r6
Suite Number: Floor:
fin k.-
New Tenant:
.... Yes El ..No
State
Day Telephone: ZIP - ��''1
City
Day Telephone:
Fax Number:
Expiration Date:
State
Zip
Zip
City State p
Day Telephone: 3,5.3 -- / 3 W)
Fax Number:
L./ 0P 4 ' ,.///4 4,4 7 —
c
City State' Zip
Day Telephone: i'ZS — Y�S— �`1 cc.
Fax Number: (' z J a 7
Page 1 of 6
BUILDII
Will there be
PLANNING
Q:\Applications\Forms- Applications On Line\3 -2006 - Permit Applieation.doc
Revised: 9 -2006
bh
Valuation of Project (contractor's bid price): $ 15 la JJ Existing Building Valuation: $
Scope of Work (please provide detailed information): ntW j1451 L At (( l ts( / �
u
new rack storage? ■ .... Yes
oxide All Buildiing Areas in SquareFot tage Belo
DIVIS 4 N:
If yes, a separate permit and pl • submittal will be required.
viac
e.-3
Single family build' footprint (area of the foundation of all structures, plus any decks over 18 inches an ' overhangs greater than 18 inches)
*For an Accesso ' dwelling, provide the following:
Lot (sq ft): Floor area of principal dwelling: Floor area of accessory dwelling:
*Provide documentation that shows that the principal owner lives in one of the dwellings as his or her primary residence.
Number of Parking Stalls Provided: Standard:
Will there be a change in use? ❑ Yes [No If "yes ", explain:
Compact:
Handicap:
FIRE PROTECTION/HAZARDOUS MATERIALS:
❑ Sprinklers ❑ Automatic Fire Alarm Er None ❑ Other (specify)
Will there be storage or use of flammable, combustible or hazardous materials in the building? ❑ Yes � o
If `yes', attach list of materials and storage locations on a separate 8 -1/2 " x 11 " paper including quantities and Material Safety Data Sheets.
SEPTIC SYSTEM
❑ On -site Septic System — For on -site septic system, provide 2 copies of a current septic design approved by King County Health
Department.
Page 2 of 6
Fixture Type: ,!
Qty
; Fixture Type : ,
Qty
Fixture Type .
;Qty -
Fixture Type:
Bathtub or combination
bath/shower
Drinking fountain or water
cooler (per head)
Wash fountain
Gas piping outlets
Bidet
Food -waste grinder,
commercial
Receptor, indirect
waste
Clothes washer, domestic
Floor drain
Sinks
ef 1
Dental unit, cuspidor
Shower, single head trap
I
Urinals
.3
Dishwasher, domestic, .
with independent drain
1
Lavatory .
5
Water Closet
Building sewer or trailer
park sewer
Rain water system — per
drain (inside building)
Water heater and/or
vent
I
Additional medical gas
inlets/outlets — six or more
Industrial waste
pretreatment interceptor,
including its trap and vent,
except for kitchen type
grease interceptors
1
Repair or alteration of water
piping and/or water treating
equipment
Repair or alteration
of drainage or vent
piping
Medical gas piping system
serving one to five
inlets/outlets for specific gas
PLUMBING AND GAS PIPING CONTRACTOR INFORMATION
Company Name:
Mailing Address: f ' 4 40 t'-i4`it ( 51.; • - D . ice)} l� , (AA �T
Contact Person: V f' 1/K,ilit
E -Mail Address:
Mt AA) �- S� ,�t,1 fts l c( co
Indicate type of plumbing fixtures and/or gas piping outlets being installed and the quantity below:
Q:1Applications\Fonns- Applications On Liner -2006 - Permit Appliation.doc
Revised: 9-2006
bb
City State Zip
Day Telephone: 2(%(17 — C3 L -S
Fax Number:
Contractor Registration Number: Expiration Date:
Valuation of Plumbing work (contractor's bid price): $ 4 j
Valuation of Gas Piping work (contractor's bid price): $ 0 - °° (P S E
Scope of Work (please provide detailed information): Poi) ✓ t` J
Building Use (per Int'l Building Code):
Occupancy (per Int'l Building Code):
Utility Purveyor: Water: Sewer:
Page 5 of 6
Value of Construction — In all cases, a value of construction amount should be entered by the applicant. This figure will be reviewed and is subject
to possible revision by the Permit Center to comply with current fee schedules.
Expiration of Plan Review — Applications for which no permit is issued within 180 days following the date of application shall expire by limitation.
Building and Mechanical Permit
The Building Official may grant one or more extensions of time for additional periods not exceeding 90 days each. The extension shall be
requested in writing and justifiable cause demonstrated. Section 105.3.2 International Building Code (current edition).
Plumbing Permit
The Building Official may grant one extension of time for an additional period not exceeding 180 days. The extension shall be requested
in writing and justifiable cause demonstrated. Section 103.4.3 Uniform Plumbing Code (current edition).
I HEREBY CERTIFY THAT I HAVE READ AND EXAMINED THIS APPLICATION AND KNOW THE SAME TO BE TRUE UNDER
PENALTY OF PE ' RY Y THE LAWS OF THE STATE OF WASHINGTON, AND I AM AUTHORIZED TO APPLY FOR THIS PERMIT.
BUILDING S i R R UTI1O • D AGENT:
Signature: {�
Print Name: QV ✓ AL b kV .SJ'^
Mailing Address: I `X tAp ft-
Date Application Accepted:
Q: AppliationsWorma- Applications On Line'3 -2006 - Permit Apptiation.doc
Revised: 9
bb
-1) "
Day Telephone:
(.,sfc 1Y I n
city
Date:
v5b Y- / .5 (-- 1 c6
State
Zip
Date Application Expires: o q
Page 6 of 6
Receipt No.: R07 -02848
Payee: JALON D JOHNSON
ACCOUNT ITEM LIST:
Description
PLUMBING - RES
City of Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206 -431 -3670
Fax: 206 -431 -3665
Web site: http: //www.ci.tukwila.wa.us
RECEIPT
Parcel No.: 3347400785 Permit Number: PG07 -248
Address: 11866 44 PL S TURIN Status: APPROVED
Suite No: Applied Date: 09/20/2007
Applicant: JOHNSON RESIDENCE Issue Date:
Initials: JEM Payment Date: 12/21/2007 04:36 PM
User ID: 1165 Balance: $0.00
TRANSACTION LIST:
Type Method Description Amount
Payment Check 104 249.00
Account Code Current Pmts
000/322.100 249.00
Total: $249.00
Payment Amount: $249.00
6396 12/24 9710 TOTAL 26320.88
\6\'')
doc: Receipt -06 Printed: 12 -21 -2007
Doc: RECSETS-06
RECEIPT NO: R07 -02047
Initials: JEM
User ID: 1165
Payee: JALON D JOHNSON
SET TRANSACTIONS:
Set Member Amount
ACCOUNT ITEM LIST:
Description
City of Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206 -431 -3670
Fax: 206 -431 -3665
Web site: http: / /www.ci.tukwila.wa.us
D07 -371 2,248.48
M07 -200 36.39
PG07 -248 52.00
TOTAL: 2,336.87
Payment Check 102
PLAN CHECK - RES
PW BASE APPLICATION FEE
PW PLAN REVIEW
SET RECEIPT
TOTAL:
Payment Date: 09/20/2007
Total Payment: 2,336.87
SET ID: S000000855 SET NAME: Tmp set/Initialized Activities
TRANSACTION LIST:
Type Method Description Amount
2,336.87
2,336.87
Account Code Current Pmts
000/345.830 1,786.87
000/322.100 250.00
000/345.830 300.00
TOTAL: 2,336.87
3021 /20 ^710 T0TAAL 2336 -87
Project:
(
i C)--A
T ype f Inspection:
(' ty+414 (
(_ A
Ad ess:
1 (A-14 41
C'
Date d: r ^�, _ e
, , " (
6 /k J
Special Instructions:
Date Wanted: C
Vi m. .
Requester:
/ -' D
Phone No:
COMMENTS: (1j- ; i
i C)--A
( �)/(-� _
K1.\
/ -' D
,k—
i
,,i, 7,A) L Ai
Ali J A
at
inspector:
Date:
__ - 7
INSPECTION O.
INSPECTION RECORD
Retain a copy with permit
96 67
PERMIT NO.
CITY OF TUKWILA BUILDING DIVISION it
6300 Southcenter Blvd., #100, Tukwila, WA 98188 (206)431 13 70
Approved per applicable codes. El Corrections required prior to approval.
El $60.00 REINSPECTION FEE REQUIRED. Prior to inspection, fee must be
paid at 6300 Southcenter Blvd., Suite 100. Call to schedule reinspection.
!Receipt No.:
'Date:
COMMENTS:
Type of Inspection: / n ■...)
f- //titg (-1--/fie,44-3- 6
Address:
// g b6 '/'-(L C
Date Called:
t
4_
Zikt(P J ii\---r AC- ' A
7
Requester:
- 1' /), " p`tv , 7,1 ,
- t--o
a : r‘ , 1 e-?eT ;-;)
.)P
e3 I
.
, . (P 14 r*4---t k•
._
4 ' ) ()u --e'r
1 ) J el 1 ‘/-\ ( A-s
IA A:6 e I) i -C J CIA-I 12 -4
- r , ,,
o 0 --ef rI J ce.1
)
a isrv ,,,,-,_
,
Tj B (9 (P-
Proigai , .
d'of 114/5 /2P5
Type of Inspection: / n ■...)
f- //titg (-1--/fie,44-3- 6
Address:
// g b6 '/'-(L C
Date Called:
Special Instructions:
Date Wanted:
- (
(57 /
C
a.m
Requester:
Phone No
' .1-1-' --- ----
PCO 7
INSPECTION NO. PERMIT NO.
CITY OF TUKWILA BUILDING DIVISION
Southcente Blvd.. #100, Tukwila, WA 98188 (206)431-3
I I
Approved per applicable codes.
INSPECTION RECORD
Retain a copy with permit
Et Corrections required prior to approval.
A J
rate:
Inspector:
El $60.00 REINSPECTION FEE REQUIRED. Prior to inspection, fee must be
paid at 6300 Southcenter Blvd., Suite 100. Call to schedule reinspection.
'Receipt No.:
'Date:
1 -
•
COMMENTS:
0 -./
I )) lt� 1 --AA Arl h> TJ /Es j1
1^.S of e rl` r ` ) -1 I Av
Address:
I l 8 (d(e2 Li L (
►.JA 1,11-1-N AN..i Ay (Jiv, .. re T---k-. r_./-,-
"
3 oe-_f ,„) 1 6.10 l r f -r-o £- cliei re_
c..,11 Ai f 1^IJ(A J ' ULi er , 1 -
4._ rA-A-GL b" ,, bit, l ! c# kitti .
dl:m..
p.m.
n emu Air '_,T X- U^-_ r s Jc (/ :r4
Phone No:
Z - 5 3,---- - 7 -5 - 0
Vic I ffy — ak t i ASh it ..5 .6 r 64 °L, •
3 ,J.f A (l e.A 4 6LAT :. - 1 ( —'U I fr• t 7 i
S %,.Y
Proj �
V /1 IQC•01s
Re -
Type of Inspection: -
.. A t — +i(u_�6 —�el,
Address:
I l 8 (d(e2 Li L (
PL 5
Date Called:
Special Instructions:
Date Wanted:
- \ Z - q-cf
dl:m..
p.m.
Requester:
Phone No:
Z - 5 3,---- - 7 -5 - 0
INSPECTION NO.
Approved per applicable codes.
'Inspect
INSPECTION RECORD
Retain a copy with permit
CITY OF TUKWILA BUILDING DIVISION
6300 Southcenter Blvd., #100, Tukwila, WA 98188 (206)431 -3670
®' C orrections required prior to approval.
I Date:s_
El $60.00 REINSPECTION FEE REQUIRED. Prior to inspection, fee must be
paid at 6300 Southcenter Blvd., Suite 100. Call to schedule reinspection.
(Receipt No.:
'Date:
PERMIT NO.
COMMENTS:
P.t o AP 5 r {-f--e._
M z`-ro rc A fp e r s 3
f _ - / L , / v / C 11-. 1 77 :.1 1 -p e-'
/ ^�
3
r ti it -P .P& / a ,q - i . D oe-i
Ae '/aTc(�'r'J dooix,: ✓.n I ru
r
Date Wanted:
— ZeD - p.m.
At r
1-i 6 - r r (i c.l`, a. ;
&),- 4 r ( ■ f )4..S La^ „ e (A e.el 6130 ,
Ti\ CfA i ■ im L rk 4"t re p43
6) ►i" !',
F
0 ,..PA -AiA. &o0icil y ar D
X`-/ re ": at ooh 20 ! ,, %J\ ,.
_ A 1 i
•
Pro' . /_ `
n IV y
Tyvf Inspection: , s f
► Y�- 1 �< J\ 1 yd
A dress:
I 'Jn( ,) �
/ ^�
3
Date Called:
r.
S ecial instructions:
3(a--7
Date Wanted:
— ZeD - p.m.
Requester:
Pte fl4 `l.. w - 8 , 6.5�
INSPECTION NO.
Approved per applicable codes.
INSPECTION RECORD
Retain a copy with permit
PERMIT NO.
CITY OF TUKWILA BUILDING DIVISION L 14
6300 Southcenter Blvd., #100, Tukwila, WA 98188 (206)431 -3670
orrections required prior to approval.
lnspe tor: , e
Date: 5 -
El $58.00 REINSPECTION FEE'RE&UIRED. Prior to inspection, fee must be
paid at 6300 Southcenter Blvd., Suite 100. Call the schedule reinspection.
(Receipt No.:
'Date:
COMMENTS:
Type o A
l � (.� " i &
d d-P1
iess� &C 1-
��
i.--S 1 Aii
rr
Special I
) Vn \\
si
Arck
A G e,,..
- � ! -A , �,
l p �'t�
� P
fJ� N r
td i 1 , /\S S
T
1
,
p,;
II
Proje 0x/`J s" �
(.tv
Type o A
l � (.� " i &
Address
iess� &C 1-
��
Date Called:
Special I
Date Wanted:
5- t
^ KT p
P.m.
Requester:
Phone � No:
c
6
INSPECTION NO.
❑ Approved per applicable codes.
'Inspect
f ir
INSPECTION RECORD
Retain a copy with permit
CITY OF TUKWILA BUILDING DIVISION
6300 Southcenter Blvd., #100, Tukwila, WA 98188 (206)431 -3670
Et ctions required prior to approval.
V
I Date: S- `q D
V /
$58.00 REINSPECTION FEE REQ IRED. Prior to inspection, fee must be
paid at 6300 Southcenter Blvd.. Suite 100. Call the schedule reinspection.
(Receipt No.:
'Date:
COMMENTS:
(
()A n \ 3 p p )rTh I ---
) SL Aeq % IC r INA- 1 1 Fi i 1p .- 1 — )) 1) p I iki4
i
(,.) L. e j Q A Al e--- oxil j71'
,
: C t) - A i pl ,\-- 0://-■ k /(0.6 'S
P 0(1. j4L A 4 cir7ik
--- - 1... ,Ay ti ue-c4 t p 0.6 9dpi
ii-mAi-RJ es Tr- sr of /o ro,7 iZekl
c-A. / /or A a s , EI,A 1 .6 Az-k, Li p
---1--)) -- T -- r- ( (.: 6AP U 4A1 Li p
t r .S S D ■\ p C,-rb r (-A (_14 e-- r_.,,k L 0 4i Al:
I C J fA
r, ,
Projeci:,
-- 3--OhNOKi s Z0.5
Type,of Inspection: .
‘R.61q IA— Iry PI-tpvt-ib
Address.*
1 1 eCoG Lig Pl.
Date Called:
Special Instructions:
Date Wanted:
(.—
P.m.
Requester:
Phone No:
----
C-
d=v
INSPECTION NO.
CITY OF TUKWILA BUILDING DIVISION
6300 Southcenter Blvd., #100, Tukwila, WA 981 88
Approved per applicable codes.
INSPECTION RECORD
Retain a copy with permit
2_tie
PERMIT NO.
(206)431-3670
Corrections required prior to approval.
LI $58.00 REINSPECTION FEE REQUIRED. Prior to inspection, fee must be
paid at 6300 Southcenter Blvd.. Suite 100. Call the schedule reinspection.
'Receipt No.:
'Date:
Project: ,
-- -- --.7 - 10/24, ..SK/ Pe-.5 •
Type 0-Inspection: ,,
Cro'l' Z4Y - e...-
N.,
Address ...--
1/ 6 0 V
Date Called:
Special Instructions:
/.."-
Dan nt
eo:
/2
/
Pin.
Requester:
Phone No:
INSPECTION NO.
Inspettor
INSPECTION RECORD
Retain a copy with permit
/%o
PERMIT NO.
CITY OF TUKWILA BUILDING DIVISION g•
6300 Southcenter Blvd., #100, Tukwila, WA 98188 (206)431-3 7
Approved per applicable codes. Corrections required prior to approval.
COMMENTS:
El $58.00 REINSPECTION FEE REQUIRED. Prior to inspection, fee must be
paid at 6300 Southcenter Blvd.. Suite 100. Call the schedule reinspection.
'Receipt No.:
'Date:
Date: 5/22/2008
Number of pages including this she :8
Company: City of Tukwila- Inspection Div.
Attn: Carol Martin
Phone: 206 - 396 -4269
Fax #:206 -431 -3665
From: Jennifer Joyce
RE: Requested specs on gas tubing for VJ
Custom Homes, 11866 44 PI So, Tukwila
Hi Carol,
Here are some more specs for Verdane Johnson's job. Hopefully this info helps.
T •d
Heating
9001 Pacific Avenue
Tacoma, Washington 98444
(253) 922 -2211 Fax (253) 539 -8709
(9ri
60LB6ESES2 3u3 a2e4TJaH
d6E:T0 80 22 ReW
•
• 1.0 Introduction
p ott),&
This installation /training guide is designed to assist a Pro -Flex® qualified installer / 0
in the methods and procedures for the installation of flexible gas piping (CSST).
The installer must also meet all qualifications required by the state and/or local
administrative authority administering the provisions of the code where the gas
piping is installed.
It would be impossible for this guide to anticipate and cover every possible variation in housing
configurations and construction styles, appliance loads and local code requirements. Therefore,
there will be applications that are not covered in this document. The user should exercise good
judgement on system design and installation, or seek technical input from other qualified
sources.
Where a conflict exists between this guide and local requirements the local codes shall take
precedence. In the absence of local codes, in accordance with National Fuel Gas Code,
ANSI Z223.1 in the USA, /NFPA 54, Natural Gas and Propane Installation Code, CSA
B149.1 & B149.2 in Canada, and the International Fuel Gas Code. In cases where the
requirements of the guide are in conflict with the local code, the local code must take
precedence, unless the local code authority having jurisdiction approves a variance, or
change.
Special attention must be given to the proper design, installation, testing and use of the gas
piping. Sound engineering, principles and practices must be exercised, as well as diligent
adherence to the proper installation procedures. All installed systems must pass customary
installation inspections by the administrative authority prior to being placed in service.
Improper installation or operation of the system may result in fire, explosion, or asphyxia-
tion. Only the components provided or specified by Tru -Flex Metal Hose Corp., for the use
of Pro - Flex® as part of the fuel gas system are to be used in the installation. Use of compo-
nents from other flexible gas piping systems other than those specified as part of the Pro -
Flex® piping system is prohibited and may result in poor system performance and serious
bodily injury or property damage.
The installation instructions and practices outlined in this training guide only apply to the
use of Pro -Flex® CSST flexible gas piping systems. Tru -Flex Metal Hose Corp., assumes
no responsibility for installations made with other manufacturers flexible gas piping sys-
tems.
This installation /training guide has been written in accordance with the most current edi-
tion of the following standard: ►�
ANSI LC -1 -2005, CSA 6.26 -2006
"Fuel Gas Piping Systems Using Corrugated Stainless Steel Tubing (CSST)"
2'd 60LBSESES2
c S us
4U3 a2e4T.Jaw d0b :i0 60 22 ReW
Pc
This standard applies to natural and propane gas piping systems using corrugated stainless steel tubing
(CSST), intended for installation in residential, commercial or industrial building including the follow-
ing components as a minimum:
a) Corrugated stainless steel tubing (CSST)
b) Fittings for connection to the CSST
c) Striker plates andior protective conduit to protect the installed CSST from puncture
threats
Other Components of piping systems covered in this standard include gas manifolds, gas
pressure regulators. If such additional components are required to complete the gas pip-
ing installation, they shall be either be provided as part of the piping system or specified
in this Pro -Flex® CSST installation/Training Guide.
• Pro - Flex® Fittings are tested for concealment (subject to local code approval)
• Pro -Flex® can be routed in most locations where traditional rigid gas piping materials
are installed:
* Inside hollow wall cavities and through walls
* Beneath or through floor and ceiling joists
* On top of ceiling joists in an attic space
* Outside of a building to gas meters and propane supply tanks
• Pro -Flex® has been tested and listed by CSA (formerly American Gas Association)
for outdoor use.
• Pro -Flex® can be used with all fuel gases recognized in the NFPA 54 National Fuel
Gas Code up to a maximum ANSI /CSA LC -1 listed operating pressure of 5 psi (34.5
kPa). The maximum actual operating pressure, including transients, shall not in any
case exceed 6.5 psi (44.8 kPa).
• Pro -Flex® can be used in combination with all approved fuel piping materials for new
construction and for replacing and retrofitting existing piping installations. All Pro-
Flex® mechanical joint fittings terminate in a standard NPT male pipe thread which
allows for
attachment to valves, unions and couplings.
• For underground burial and embedded in concrete, (CSST) flexible gas piping must be
routed within a non - metallic, water tight conduit. No mechanical joint fittings are per-
mitted within the conduit.
• Pro-Flex® may be connected directly to FIXED appliances (subject to local code
approval).
Flexible appliance connectors (such as Tru- Flex's Home -Flex® gas connectors) must
be used to connect to a moveable gas appliance.
TRU -FLEX METAL HOSE CORP.
800 - 255 -6291
d 60LBSESES2
West Lebanon, IN 47991
e -mail: truflex@tru- flex.com
1
qua e2e4tuaH doi :iO BO 22 eW
Applicable Codes & Standards
ATTENTION
The installation of PRO - FLEX' Corrugated Stainless Steel
Tubing (CSST) must be performed by a qualified installer who
has been trained in the use of the Piro -Flex' system. The installer
must also meet all qualifications required by the state andior
local administrative authority administering the provision of the
code where gas piping is installed. •
This Installation /Training Guide provides the user with a general
guidance when designing and installing fuel gas piping systems
using PRO - FLEX' CSST gas piping. This guideline must be
used in conjunction with all local building codes. Local
requirements will take precedence in the event there is a conflict
between the guideline and the local codes. The installation shall
be made in accordance with local codes, or, in the absence of
local codes, in accordance with National Fuel Gas Code, ANSI
Z223.1/NFPA 54, Natural Gas and Propane Installation Code,
CSA B149.1& B149.2 in Canada, the International Fuel Gas
Code, the Federal Manufactured Home Construction and Safety
Standard, 24 DFR Part 3280, the Manufactured Housing
Construction and Safety Standards, ICC /ANSI 2.0, or the
Standard on Manufactured Housing, NFPA 501, as applicable.
Special attention must be given to the proper design, installation,
ilo testing and use of the gas piping system. Sound engineering
principles and practices must be exercised, as well as diligent
adherence to the proper installation procedures. All installed
systems must pass customary installation inspections by the
administrative authority prior to being placed in service.
WARNING!
Improper installation or operation of the system may result
in fire, explosion, or asphyxiation. Only the components
provided or specified by 11u -Flex Metal Hose Corp., for the
use of Pro -Flex as part of the fuel gas system are to be used
in the installation. Use of components from other flexible gas
piping systems other than those specified as part of Pro -Flex'
system is prohibited and may result in poor system
performance and serious bodily injury or property damage.
SP�
copyright 1996. 1998, 1999, 2001, 2002, 2004, 2005 by Tru -Flex Metal Hose Corp
1 all rights reserved
d 60LBSESES2
9/c)
APPLICABLE CODES & STANDARDS
Standards:
• ANSI LC1 -2005 and CSA 6.26 -2006. "Fuel Gas Piping
Systems Using Corrugated Stainless Steel Tubing
(CSST)."
Listings:
• CSA - CSA International - Certificate #189768 -
#1174673
• IAPMO - International Association of Plumbing &
Mechanical Officials - File #3669
Code Compliances:
• ANSI/CSA LC -1 -2005 Fuel Gas Piping Systems Using
Corrugated Stainless Steel Tubing
• National Standard of Canada - Nationals Gas &
propane Installation Code, CAN /CGA- B149.1 &149.2
• NFPA - National Fuel Gas Code (NFPA 54)
• NFPA - National Fuel Gas Code (NFPA 58 Standard
for Storage and Handling of LP [Liquified Petroleum
Gasses] Gas Code)
• BOCA - National Mechanical Code
• CABO - 1 & 2 Family Dwelling
• SBCCI - Southern Building Code Congress
International "standard gas code"
• ICC - International Mechanical Code
• IAPMO - International Association of Plumbing and
Mechanical Officials - File #3669
• UPC - Uniform Plumbing Code
• UMC - Uniform Mechanical Code
While every effort has been made to prepare this document in
accordance with all regional model codes in effect at its printing,
Tru -Flex Metal Hose Corp., cannot guarantee that the local
administrative authority will accept the most recent version of
these codes. It is the ultimate responsibility of the qualified
installer to determine suitability and acceptance of any building
components including gas piping. Tru - Flex Metal Hose Corp.,
manufactures of Pro -Flexo CSST assumes no responsibility
for laboscor material for installations made without prior
determination of local code authority acceptance.
q.u3 a3e4tuaF1 d0i7:i0 80 22 Rew
7.0 Technical Data Sheet
PRO -FLEX® C.S.S.T. SPEC / DATA SHEET
All system components are CSA approved
PRO -FLEX® TUBING
TUBING:
COATING:
PRO -FLEX® FITTINGS
MALE & FEMALE FITTINGS:
BRASS UNION FITTING:
REDUCER/INCREASERS:
TERMINATION PLATES:
RETAINER RING:
WASHER RING:
SILICONE 0-RING:
HI -TEMP GASKET:
S•d
STRIKER PLATES:
MANIFOLDS:
VALVES:
REGULATOR:
METAL CONDUIT:
60L86ESESE
ASTM A240/A240M -95A Type 304 Stainless Steel
Polyethylene Jacketing
C360 Brass
C360 Brass
C360 Brass
1018 Low Carbon Steel
ASTM A240/A240M -95A Stainless Steel
ASTM A240/A240M -95A Stainless Steel
Silicone Rubber, proprietary material
The gasket is made from a non - asbestos, proprietary
material. The gasket is compressed during the assembly
processes and should be inspected and replaced, if
necessary, when reusing the fitting.
PRO -FLEX® ACCESSORIES
rke'/c
H
Manufactured of 16 ga hardened steel
Standard 150 lb. Malleable Iron Threaded Fittings Single
tee and multiple tee manifold assemblies.
Ball valves which meet=the ANS /ASM B 16.33 or
CGA 9.1 -M88 as approved shutoff valves for use with
CSST tubing.
Maxitrol 325 -3 or 325 -5A or equivalent.
Floppy - Flee'' manufactured by Tru -Flex Metal Hose Corp.
Galvanized.strip -wound metal conduit used as a protection
device.
4U3 82e'IJaH
d0b :i0 80 22 ReW
8.o CSST Installation Checklist
Description
Corrugated Stainless Steel Tubing (CSST) has been design certified by CSA (formerly know as AGA, The
American Gas Association Laboratory since 1990) for use as a fuel gas piping system. CSST has been tested per
ANSI/CSA -LC1 as required for approval and is listed as an approved gas piping material in the National Fuel Gas
Code -NFPA 54, BOCA National Mechanical Code, SBCCI Standard Gas Code, and the new International Code
Series. Pro - Flee is a listed product with IAPMO and pursuant to section 302.1 Alternate Materials and Methods
of the Uniform Plumbing Code. may be installed with approval from the local administrative authority.
Approval: Conditions and Requirements
A flexible gas piping system using CSST must be installed in accordance with all local building codes and the
manufacturer's instructions. The following check list is designed to assist the local administrative authority to
perform an inspection of a fuel piping system using corrugated stainless steel tubing.
1. Flexible Gas Piping may only be installed by a Qualified Installer who has successfully completed the
manufacturers Training Program. A manufacturer's qualification/training ng card is required to purchase
and install Flexible Gas Piping.
2. Only the components provided or specified by the manufacturer (including strike protection) as part
of the piping system are to be used in the installation.
3. CSST routed in a location which is concealed, constrained and within 3 inches of a potential threat
will be protected against damage by protection devices listed in the manufacturers
Installation/Training Guide.
4. Sizing of the Flexible Gas Piping System must be performed using capacity tables found in the
manufacturer's Installation/Training Guide or other code approved CSST capacity tables.
5. CSST should not be connected to moveable appliances. Connection's to moveable appliances such
as ranges in clothes dryers should be accomplished with a `flexible appliance connector," such as
Home Flex• St. St. Gas Appliance Connectors by Tru -Flex Metal Hose.
6. The Flexible Gas Piping System must be pressure tested for leaks during rough construction in
accordance with all local codes. In the absence of local requirements, test in accordance with NFPA
54, National Fuel Gas Code which is 1 1/2 times the maximum working pressure but not less than 3
PSI. To subject the entire CSST system to pressure test, the pressure regulators should be isolated
or removed.
9 'd
7. Regulators are suitable for multi -poise mounting. When using a vent limiting device however, the
regulator must be mounted in a horizontal upright position.
8. A manifold assembly utilizing a pounds -to- inches regulator shall include a ball -valve ahead of the
regulator and installed in an accessible location so that the regulator can be inspected, maintained
and serviced if repair or replacement is required.
9. When installed outdoors, the external jacket shall remain intact as much as possible. Exposed
portions of the stainless steel tubing shall be wrapped to provide protection from corrosive threats.
10. For installation buried underground, concrete/asphalt or emtvdded in concrete, CSST must be
routed in a nonmetallic water -tight conduit which has an inside diameter at least 112 in. larger than
the outside diameter of the tubing. For under concrete /asphalt slab, sleeved CSST must be buried
in accordance with all local codes. No mechanical joints are permitted within the conduit.
11. Electrical Bonding must be in place as described on page 28 under "Electrical Bonding /Grounding."
WARNING: Improper installation or operation of the system may result
In fire, explosion, or asphyxiation. Only the components provided or
specified by Tru -Flex Metal Hose Corp.. for the use of Pro-Flex' as part of
the fuel gas system are to be used In the Installation. Use of components
from other flexible gas piping systems other than those specified as part
of Pro-Rex' system is prohibited and may result in poor system perform-
ance and serious bodily injury or property damage.
GOL86ESCS2
ro
S.
While every effort has been made to prepare this document in accor-
dance with all regional model codes In effect at its printing, Tru -Flex Metal
Hose cannot guarantee that the local administrative authority will accept
the most recent version of these codes. It is the ultimate responsibility of
the qualified installer to determine suitability and acceptance of any build-
ing component including gas piping. Tru -Flex Metal Hose Corp. manu-
facturers of Pro-Flex• CSST assumes no responsibility for labor or
material for installations made without prior determination of local
code authority acceptance.
49
lu3 a2e4tuaH
d i f7 : i 0 80 22 ReW
9.0 Terminology
CONVERSION FACTORS
INCHES OF WATER COLUMN (In.-w.c.) - Method by which
pressure is measured inches by a manometer or pressure gauge. Used in the gas
industry when the pressure is less than 1 psi.
2 TERMINOLOGY
PRESSURE CONVERSION CHART
114 psi = 6.921 in. w.c. = (approx. 7 w.c.)
1/2 psi = 13.842 in. w.c. = (approx. 14 w,c.)
1 psi = 27.684 in. w.c. = (approx. 28 w.c.)
2 psi = 55.368 in. w.c. = (approx. 56 w.c.)
5 psi = 138.42 in. w.c. = (approx. 140 w.c.)
AGA • American Gas Association
ANSI - American National Standards Institute
ANSi Z223.1 - 1992 edition of the National Fuel Gas Code published by American
National Standards Institute. Also known as NFPA 54 (National Fire Protection
Association pamphlet 54)
ASTM - American Society for Testing and Matenals
APPUANCE (Equipment) - Any device which utilizes gas as a fuel or raw material to
produce light, heat, power, refrigeration, or air conditioning.
APPROVED • Acceptable to the authority having jurisdiction.
ASME • American Society of Mechanical Engineers
AUTHORITY HAVING JURISDICTION •The organization, office or individual responsi-
ble for approving" equipment, an installation or procedure.
BTU - Abbreviation for British Thermal Unit, which Is the quantity of heat required to
raise the temperature of one pound of water one degree Fahrenheit.
CFH - Gas flow rate stated in cubic feet per hour. A CFH of natural gas usually con-
tains 1,000 BTU's and LPG contains 2,500 BTU's. Consult your local gas utility for
actual BTU content in your area.
CAN- CGA•B149 -1 - Natural gas Installation code book used in Canada. Most current
edition.
CAN- CGA•E149.2 - Propane gas installation code book used In Canada. Most current
edition.
CSST - Corrugated stainless steel tubing
CONCEALED GAS PIPING - Gas piping, which, when in place in a finished building,
would require removal of permanent construction to gain access to the piping,
CONNECTOR, GAS APPLIANCE - A factory- fabricated assembly of gas conduit and
related fittings designed to convey gaseous fuel, and used for making connections
between a gas supply piping outlet and the gas to an appliance. It Is equipped at each
end for attachment to standard taper pipe threads.
DELIVERY PRESSURE • Gas pressure available after the gas meter.
DESIGN PRESSURE - The maximum permitted operating pressure.
DRIP LEG • The container (dirt trap pocket) placed at the lowest point in a system of
piping to collect foreign materials and condensate. The container must be accessible
for cleanout.
END (EQUIVALENT HYDRAULIC DIAMETER) - A measurement of the relative
hydraulic efficiency between different tube sizes. The larger the value of EHD, the
greater the flow capacity.
ELEVATED PRESSURE SYSTEM - Terms for any pressure above 1/2 PSIG, but less
than 5 PSIG.
EXPOSED GAS PIPING - Gas piping which will be in view in the finished structure.
FUEL GAS - A commonly distributed gas used for fuel such as natural gas, manufac-
tured gas, undiluted liquefied petroleum gas (vapor phase only), liquefied petroleum
gas -air Mixtures of these gases (included propane and butane).
GAS UTIUZATION EQUIPMENT - Any device which utilizes gas as a fuel or raw mate-
rial or both.
JOINT • A connection between two lengths of tubing ore length of tubing and fitting.
LISTED - Equipment or materials Including a list published by en organization accept-
able to the authority having jurisdiction and concerned with product evaluation that
maintains periodic Inspection of production of listed equipment or materials and whose
listing states either that the equipment or material meets appropriate standards or has
been tested and found suitable for use in a specified manner.
L'd 6OL86ESESE
vt
L of +
LOCKUP PRESSURE, REGULATOR - The system pressure, Immediately downstream
of the regulator, at which the regulator valve will completely close (leak tight) under no•
flow conditions to prevent the downstream pressure from exceeding a predetermined .;
level.
LOAD - The amount of gas required by an appliance, o group of aopliances per their
manufacturers raring (see CFH definition).
MANIFOLD • A fitting to which a number of branch lines are connected.
MAXIMUM ACTUAL OPERATING PRESSURE - The maximum pressure existing in a
piping system during a normal annual operating cycle.
METER - An instrument installed to measure the volume of gas delivered through a
piping system.
NFPA - National Fire Protection Agency
PIPING SYSTEM - As used in this manual, an assembly cf corrugated stainless steel
tubing and tubing connection fitting, intended for field assembly and installed in resi-
dential or commercial building to distribute fuel gas to gas utilization equipment within
the building. The piping system may also Include a gas pressure regulator(s), shutoff
valves. tube shielding devices, distribution manifold(s) and other approved devices or
components.
PRESSURE • Unless stated otherwise, is expressed in pounds per square inch above
atmospheric pressure, i.e. gauge pressure (PSIG).
PRESSURE DROP - The loss of static pressure of flowing fuel gas due to friction or
other tow resistance in tubing, fittings, valves, regulators or other devices in the piping
system.
PRESSURE REGULATOR - A valve which reduces and maintains pressure, ft automat-
ically opens and closes In response to changing pressure conditions in the dovmstream
piping.
PSIG - Pounds per square inch. gauge. The pressure as read from a measurement
gauge or device. Gauge pressure is pressure above atmospheric pressure and is some-
times referred to as PSI.
PURGE - To completely displace an existing as with a new gas.
QUALIFIED INSTALLER - Any individual, firm, corporation or company which either i
person or through a representative is engaged in and is responsible for the installatlo
or replacement of building gas piping systems, who is experienced In such work, tam
iar with all precautions required, and has compiled with all the requirements of the
authority having jurisdiction.
QUICK - DISCONNECT DEVICE - A hand- operated device which provides a means for
connecting and disconnecting an appliance or an appliance connector to a gas supply,
and which Is equipped with an automatic means to shut off the gas supply when the
device is disconnected.
REGULATOR, GAS APPLIANCE PRESSURE - A device placed in a gas line for con-
trolling and maintaining a uniform pressure to the manifold or gas burning equipment
REGULATOR, PRESSURE - A device installed/placed In a gas line for reducing, con-
trolling and maintaining the pressure In that portion of the piping system downstream of
the device. This device is used in elevated pressure systems and is referred as a pres-
sure regulator in this manual.
REGULATOR, SERVICE PRESSURE - A device installed by the servicing gas supplier
to reduce and limit the service line gas pressure to delivery pressure.
REGULATOR VENT - The opening in the atmospheric side of the regulator housing
permitting the In and out movement of air to compensate for the movement of the reg-
ulator diaphragm.
SHIELDING DEVICES - A component of the piping system (Floppy- Flex(tm)) used to
protect the Installed corrugated tubing form accidental puncture by nails, screws or
similar hardKare at concealed tubing support points.
SPECIFIED GRAVITY - As applied to gas, Is the ratio of the weight of a given volume
to that of the same volume of air, both measured under the same conditions.
STRIKER PLATES • A special type of shielding device used when concealed tubing is
run through wail studs. floor and ceiling Joists or other structural members where tubing
movement Is restricted.
TUBING - ASTM A240 Type 304 Annular Corrugated Stainless Steel Tubing which is
bendable and comes In 75 foot coils.
VALVE, SHUTOFF - A device used in piping to control the gas supply to any section of, the piping system or to an appliance.
VENT LIMING DEVICE - A valve that limits the discharge of gas from a regulator in
the event of a diaphragm rupture. Gas discharge is limited to an ANSI approved level.
See manufacturer's specifications.
WATER COLUMN, INCHES - method of stating pressure measured in inches of water
column by a manometer or pressure gauge. Refer to 'CONVERSION FACTORS" listed
at the beginning of this text.
4u3 e4 t "JaH d I s I O 80 Zz ReW
•
•
'9,2 Limited Warranty
rcrLc6
- 7 of- '
PRO -FLEX° INTERIOR GAS PIPING SYSTEM
Subject to the terms and conditions contained in this Limited Warranty, Tru-Ftex Metal Hose Corp. "TRU- FLEXC"" warrants to the original purchaser of
the PRO-FLEX"' Interior Gas Piping System that such product will be free from any defect in material and workmanship for a period of one (1) year from
the date of installation. Should any such defects be discovered within one (1) year from the date of installation by a qualified installer the questionable
PRO -FLEX` part should be returned to TRU- FLEX" at P.O. Box 247. 2391 Sc. State Road #263, West Lebanon, IN 47991. (765) 893 -4403. If. upon
inspection TRU•FLEX determines the part to he defective in material or workmanship, tnen TP,U- FLEX" will furnish a replacement, or at its option.
repair the defective part. This warranty does not include the cost of labor for removino and replacing or repairing the de`ective part ncr does it cover the
cost of transporting the materials.
This warranty shall not apply to any component part of the Interior Gas Piping system product if it has been installed, altered, modified, repaired or
misused, through negligence or otherwise. in a way that in the opinion of TRU -FLEX" affects the reliability of, or detracts from, the performance of the
product. This limited warranty does not cover defects or damage resulting from abuse, neglect, lack of reasonable care, modification or attachment of
improper components or devices to this product. Nor does this limited warranty cover replacements to repairs necessitated by loss or damage resulting
from any cause beyond the control of TRU- FLEX "' including, but not limited to, acts of God, acts of government, floods and fires.
INSTALLATION REQUIREMENTS
This limited warranty coverage is subject to and expressly contingent upon the following conditions and limitations; each of the
following is a condition precedent to TRU - FLEX'S" obligations hereunder:
A. Installation must be performed strictly in accordance with local plumbing and/or building codes, ordinances and regulations and all other applicable
taws, and in accordance with the PRO -FLEX* Installation/Training Guide and good industry practices. Any deviation from recommended installation
or use instructions will nullify this limited warranty.
B. Installation must be performed by a qualified installer who Is recognized as being qualified to install gas piping by local, state, federal or other
governmental agencies.
C. Pressure testing must be performed during rough construction with piping system exposed, all done in accordance with good and safe business
practices.
O. TRU - FLEX" assumes no responsibility for any system which has been improperly installed.
E. The purchaser shall be responsible for giving timely written notice of a warranty failure and promptly making TRU -FLEX` aware of any alleged system
deficiencies which purchaser desires to be remedied, all of which shall be done within seven (7) days of discovery of the alleged system deficiency.
GENERAL CONDITIONS AND LIMITATIONS
The obligation of TRU -FLEX" pursuant to this warranty is limited, at TRU- FLEX'S' discretion, to: (a) making a replacement component part available, (b)
the repair of the defective component part, or (c) the refund of the purchase price. TRU- FLOC' shall have no obligation for the furnishing of any labor
involved or connected therewith such as the labor required to diagnose trouble or to remove or install any such product, nor does it include responsibili-
ty for any transportation expenses or any damages or losses incurred in the transportation in connection therewith.
TRU -FLEX" shall in no event be liable for other losses, damages, costs or expenses claimed by anyone, whether direct or indirect, and whether arising
in contract or tort, including loss from failure of the product to operator for any period of time, and all other direct, indirect, special, Incidental or conse-
quential damages, including all personal Injury and property damage.
The foregoing limited warranty is in lieu of all other warranties by TRU-FLEX", express, statutory or implied by law. Without limiting the generality of the
foregoing, TRU -FLEX" makes no warranty of merchantability or fitness of the product for any particular purpose. TRU - FLEX" neither assumes nor
authorizes any person to assume TRU -FLEX` any other obligation or liability in connection with the sale of the hereinabove referenced product.
e•d BOG86ESESE
� U3 a e4TJaH dZb :iO BO ea R
To: Jennifer Joyce
Fr: Carol Martin
Re: PG07 -248
Jennifer per your request : As I have stated over the phone, the city is requiring the
Manufactured Specifications for the Gas Flex piping that Heritage Heating is utilizing for
the above named permit in the City of Tukwila.
Per Section G2414.5.3 in the 2006 IRC - Corrugated stainless steel tubing shall be listed
in accordance with ANSI LC I/CSA 6.26. Heritage needs to provide proof that this tubing
is LISTED and TESTED as well as approved to be utilized in a concealed space with its
mechanical fitting utilized with the steel piping. Please provide us with the full set of
Manufactured Specifications for our review prior to re- inspection.
If you have any questions please feel free to call me. I most likely will not be able to
return your call until the end of day as I am out doing inspections and return late.
Respectfully, Carol Martin
/
�
/
ACTIVITY NUMBER: PG07 - 248 DATE: 09 -20 -07
PROJECT NAME: JOHNSON RESIDENCE
SITE ADDRESS: 1180 44 PL S
X Original Plan Submittal Response to Incomplete Letter #
Response to Correction Letter #
Revision # After Permit Issued
DEPARTMENTS:
Bui ing Division
Pubi orks itt,„ 6 , 0
Complete
Comments:
Documents/routing slip.doc
2 -28 -02
PERMIT COORD COPY
REVIEW /ROUTING SLIP
Fire Prevention
Structural
DETERMINATION OF COMPLETENESS: (Tues., Thurs.)
Incomplete ❑
TUES/THURS ROU ING:
Please Route Structural Review Required
REVIEWER'S INITIALS:
APPROVALS OR CORRECTIONS:
Approved n Approved with Conditions
Notation:
REVIEWER'S INITIALS:
C
❑ Permit Coordinator ❑
DUE DATE: 09-5-07
Not Applicable C
Permit Center Use Only
INCOMPLETE LETTER MAILED: LETTER OF COMPLETENESS MAILED:
Departments determined incomplete: Bldg ❑ Fire ❑ Ping ❑ PW ❑ Staff Initials:
No further Review Required
DATE:
DUE DATE: 10-23-07
Not Approved (attach comments) n
DATE:
Planning Division
n
Permit Center Use Only
CORRECTION LETTER MAILED:
Departments issued corrections: Bldg ❑ Fire ❑ Ping ❑ PW ❑ Staff Initials:
CITY OF TUKWILA
Community Development Department
Permit Center
6300 Southcenter Blvd., Suite 100
Tukwila, WA 98188
Permit Center /Building Division:
206 -431 -3670
Public Works Department:
206 - 433 -0179
Planning Division:
206 -431 -3670
STATE OF WASHINGTON)
) ss.
COUNTY OF KING )
AFFIDAVIT IN LIEU OF CONTRACTOR REGISTRATION
L VrJc& p #Ii � i el 5 .,
[please print]
1. I have made application for a building permit from the City of Tukwila, Washington.
2. I understand that state law requires that all building construction contractors be registered with the State of
Washington. The exceptions to this requirement are stated under Section 18.27.090 of the Revised Code of
Washington, a copy of which is printed on the reverse side of this Affidavit. I have read or am familiar with RCW
18.27.090.
3. I understand that prior to issuance of a building permit for work which is to be done by any contractor, the City of
Tukwila must verify either that the contractor is registered by the State of Washington, or that one of the exemptions
stated under RCW 18.27.090 applies.
4. In order to provide verification to the City of Tukwila of my compliance with this requirement, I hereby attest that
after reading the exemptions from the registration requirement of RCW 18.27.090, I consider the work authorized
under this building permit to be exempt under No. /3 , and will therefore not be performed by a registered
contractor.
I understand that I may be waiving certain rights that I ;: ht otherwise have under state law in any decision to engage an
unregistered contractor to perform construction work
\t11jllf AP'L C
44' 0144 `gsloN$4911,!
N '' AV BL� G =�
" ,0 - -
tt t fll� F WASO a``�
%tt1m∎`• NO RY
\applications\8 -2004 affidavit in lieu of contractor registration
PERMIT NO.: � _ 3 I
f2(77-- -y
, states as follows:
Signed and sworn to before me this
rg0' day of c /07 her , 200 7.
Residing at
UBLIC in and for the State of Washington,
X/19
, County.
Name as commissioned: ia- e_ /WOrl
My commission expires: OS' - / 0
18.27.090 Exemptions. This chapter shall not apply to:
1.
2. An authorized representative of the United States
Government, the State of Washington, or any
incorporated city, town, county, township,
irrigation district, reclamation district or other
municipal or political corporation or subdivision of
this state;
3. Officers of the court when they are acting within
the scope of their office;
4. Public utilities operating under the regulations of
the utilities and transportation commission in
construction, maintenance, or development work
incidental to their own business;
5. Any construction, repair or operation incidental to
the discovering or producing of petroleum or gas,
or the drilling, testing, abandoning, or other
operation of any petroleum or gas well or any
surface or underground mine or mineral deposit
when performed by an owner or lessee;
6. The sale or installation of any finished products,
materials, or articles of merchandise which are not
actually fabricated into and do not become a
permanent fixed part of the structure;
7. Any construction, alteration, improvement or
repair of personal property, except this chapter
shall apply to all mobile, manufactured housing. A
mobile /manufactured home may be installed, set
up, or repaired by the registered or legal owner,
by a contractor licensed under this chapter, or by
a mobile /manufactured home retail dealer or
manufacturer licensed under chapter 46.70 RCW;
8. Any construction, alteration, improvement, or
repair carried on within the limits and boundaries
of any site or reservation under the legal
jurisdiction of the federal government;
9. Any person who only furnished materials,
supplies, or equipment without fabricating them
into, or consuming them in the performance of, the
work of the contractor;
10. Any work or operation on one undertaking or
project by one or more contractors, the aggregate
contract price of which for labor and materials and
all other items is less than $500.00, such work, or
operations being considered as of a casual, minor,
or inconsequential nature. The exemption
prescribed in this subsection does not apply in all
instance wherein the work or construction is only a
part of a larger or major operation, whether
undertaken by the same or a different contractor,
or in which a division of the operation is made into
\applications\8 -2004 affidavit in lieu of contractor registration
w
contracts of amounts less than $500.00 for the
purpose of the evasion of this chapter or
otherwise. The exemption prescribed in this
subsection does not apply to a person who
advertises or puts out any sign or card or other
device which might indicate to the public that he is
a contractor, or that he is qualified to engage in
the business of contractor;
11. Any construction or operation incidental to the
construction and repair of irrigation and drainage
ditches of regularly constituted irrigation districts
or reclamation districts; or to farming, dairying,
agriculture, viticulture, horticulture, or stock or
poultry raising; or to clearing or other work upon
land in rural districts for fire prevention purposes;
except then any of the above work is performed
by a registered contractor,
12. An owner who contracts for a project with a
registered owner;
13. Any person working on his own property, whether
occupied by him or not, and any person working
on his residence, whether owned by him or not but
his exemption shall not apply to any person
otherwise covered by this chapter who constructs
an improvement on his own property with the
intention and for the purpose of selling the
improved property;
14. Owners of commercial properties who use their
own employees to do maintenance, repair, and
alteration work in or upon their own properties;
15. A licensed architect or civil or professional
engineer acting solely in his professional capacity,
an electrician licensed under the laws of the state
of Washington, or a plumber licensed under the
laws of the state of Washington while operating
within the boundaries of such political subdivision.
The exemption provided in this subsection is
applicable only when the licensee is operating
within the scope of his license;
16. Any person who engages in the activities herein
regulated as an employee of a registered
contractor with wages as his sole compensation;
17. Contractors on highway projects who have been
prequalified as required by chapter 13 of the Laws
of 1961, RCW 47.28.070 with the department of
transportation to perform highway construction,
reconstruction, or maintenance work.