HomeMy WebLinkAboutPermit M08-002 - FELLER SIGN COMPANYFElLER SIGN COMPANY
1031 ANDOVER PK E
EXPIRED 11-10-08
M08 -002
Parcel No.: 2623049019
Address:
Suite No:
Tenant:
Name:
Address:
Owner:
Name:
Address:
doc: IMC - 10/06
1031 ANDOVER PK E TUKW
Contact Person:
Name: SHANNON BUCKINGHAM
Address: 5108 D ST NW , AUBURN WA
Value of Mechanical: $10,000.00
Type of Fire Protection:
Cityef Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206 - 431 -3670
Fax: 206 - 431 -3665
Web site: http: / /www.ci.tukwila.wa.us
FELLER SIGN CO
1031 ANDOVER PK E , TUKWILA WA
Contractor:
Name: EMERALD AIRE INC.
Address: 22043 68TH AVENUE SOUTH , KENT, WA
Contractor License No: EMERAAI055BL
Furnace: <100K BTU 0
>100K BTU 0
Floor Furnace 0
Suspended/Wall/Floor Mounted Heater 0
Appliance Vent 0
Repair or Addition to Heat/Refrig /Cooling System.... 1
Air Handling Unit <10,000 CFM 0
>10,000 CFM 0
Evaporator Cooler 0
Ventilation Fan connected to single duct 0
Ventilation System 0
Hood and Duct 0
Incinerator: Domestic 0
Commercial/Industrial 0
MECHANICAL PERMIT
M3 PROPERTIES LLC
C/O JSH PROPERTIES INC , 555 S RENTON VILLAGE PL #100
DESCRIPTION OF WORK:
INSTALL 5 -TON SPLIT SYSTEM A/C UNIT AND ASSOCIATED DUCTWORK
EQUIPMENT TYPE AND QUANTITY
* * continued on next page **
M08 -002
•
Permit Number:
Issue Date:
Permit Expires On:
Phone:
Phone: 253 872 -5665
Phone: 206 872 -5665
Expiration Date: 04/01/2009
M08 -002
05/14/2008
11/10/2008
Fees Collected: $269.58
International Mechanical Code Edition: 2006
Boiler Compressor:
0 -3 HP /100,000 BTU 0
3 -15 HP /500,000 BTU 0
15 -30 HP /1,000,000 BTU.. 0
30 -50 HP /1,750,000 BTU.. 0
50+ HP /1,750,000 BTU 0
Fire Damper 0
Diffuser 0
Thermostat 0
Wood/Gas Stove 0
Water Heater 0
Emergency Generator 0
Other Mechanical Equipment
Printed: 05 -14 -2008
Permit Center Authorized Signature:
I hereby certify that I have read and
governing this work will be complied
Signature:
Print Name:
doc: IMC -10/06
•
City of Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206- 431 -3670
Fax: 206 - 431 -3665
Web site: http: / /www.ci.tukwila.wa.us
•
Permit Number: M08 -002
Issue Date: 05/14/2008
Permit Expires On: 11/10/2008
Date: 05114
ed this permit and know the same to be true and correct. All provisions of law and ordinances
, whether specified herein or not.
The granting of this permit does not presume to give authority to violate or cancel the provisions of any other state or local laws regulating
construction o the performance of work. I am authorized to sign and obtain this mechanical permit.
L - r) rx shall become null and void if the work is not co enced within
Date 5 liajc.r
This permit sh 180 days from the date of issuance, or if the work is suspended
or abandoned for a period of 180 days from the last inspection.
M08 -002 Printed: 05 -14 -2008
Parcel No.: 2623049019
Address:
Suite No:
Tenant:
1031 ANDOVER PK E TUKW
FELLER SIGN CO
1: ** *BUILDING DEPARTMENT CONDITIONS * **
•
City of Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206 - 431 -3670
Fax: 206 - 431 -3665
Web site: http: / /www.ci.tukwila.wa.us
PERMIT CONDITIONS
•
Permit Number:
Status:
Applied Date:
Issue Date:
M08 -002
ISSUED
01/03/2008
05/14/2008
2: No changes shall be made to the approved plans unless approved by the design professional in responsible charge and the
Building Official.
3: All mechanical work shall be inspected and approved under a separate permit issued by the City of Tukwila Permit Center
(206/431- 3670).
4: All permits, inspection records, and approved plans shall be at the job site and available to the inspectors prior to
start of any construction. These documents shall be maintained and made available until final inspection approval is
granted.
5: All construction shall be done in conformance with the approved plans and the requirements of the International
Building Code or International Residential Code, International Mechanical Code, Washington State Energy Code.
6: Manufacturers installation instructions shall be available on the job site at the time of inspection.
7: All plumbing and gas piping work shall be inspected and approved under a separate permit issued by the Cityof Tukwila
Permit Center.
8: All electrical work shall be inspected and approved under a separate permit issued by the City of Tukwila Building
Department (206- 431 - 3670).
9: VALIDITY OF PERMIT: The issuance or granting of a permit shall not be construed to be a permit for, or an approval of,
any violation of any of the provisions of the building code or of any other ordinances of the City of Tukwila. Permits
presuming to give authority to violate or cancel the provisions of the code or other ordinances of the City of Tukwila
shall not be valid. The issuance of a permit based on construction documents and other data shall not prevent the
Building Official from requiring the correction of errors in the construction documents and other data.
10: ** *FIRE DEPARTMENT CONDITIONS * **
11: The attached set of building plans have been reviewed by the Fire Prevention Bureau and are acceptable with the
following concerns:
12: H.V.A.C. units rated at greater than 2,000 cfm require auto - shutdown devices. These devices shall be separately zoned
in the alarm panel and local U.L. central station supervision is required. (City Ordinance #2051)
13: H.V.A.C. systems supplying air in excess of 2,000 cubic feet per minute to enclosed spaces within buildings shall be
equipped with an automatic shutoff. Automatic shutoff shall be accomplished by interrupting the power source of the
air- moving equipment upon detection of smoke in the main return-air duct served by such equipment. Smoke detectors
shall be labeled by an approved agency for air -duct installation and shall be installed in accordance with the
manufacturer's installation instructions. (IMC 606.1, 606.2.1)
14: Duct detectors shall send a supervisory signal only upon activation. (City Ordinance #2051)
15: Duct smoke detectors shall be capable of being reset from a single point near the alarm panel. (City Ordinance #2051)
doc: Cond -10/06
M08 -002 Printed: 05-14 -2008
• •
City of Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206 - 431 -3670
Fax: 206 - 431 -3665
Web site: http: / /www.ci.tukwila.wa.us
16: All new fire alarm systems or modifications to existing systems shall have the written approval of The Tukwila Fire
Prevention Bureau. No work shall commence until a fire department permit has been obtained. (City Ordinance #2051) (IFC
104.2)
17: Remote indicator lights are required on all above ceiling smoke detectors. (City Ordinance #2051)
18: Local U.L. central station supervision is required. (City Ordinance #2051)
19: The installation of wiring and equipment shall be in accordance with N.F.P.A. 70, Article 760, Fire Protective
Signaling Systems. (NFPA 72- 1.3.3)
20: An approved manual fire alarm system is required for this project. The fire alarm system shall meet the requirements of
Americans With Disabilities' Act (I.B.C.), N.F.P.A. 72 and the City of Tukwila Ordinance #2051.
21: Maintain sprinlder coverage per N.F.P.A. 13. Addition/relocation of walls, closets or partitions may require relocating
and/or adding sprinlder heads. (IFC 901.4)
22: All new sprinlder systems and all modifications to existing sprinkler systems shall have fire department review and
approval of drawings prior to installation or modification. New sprinkler systems and all modifications to sprinlder
systems involving more than 50 heads shall have the written approval of the W.S.R.B., Factory Mutual, Industrial Risk
Insurers Kemper or any other representative designated and/or recognized by the City of Tukwila, prior to submittal to
the Tukwila Fire Prevention Bureau. No sprinkler work shall commence without approved drawings. (City Ordinance #2050)
23: All sprinkler system plans, calculations and the contractors Materials and Test Certificates submitted to the Tukwila
Fire Prevention Bureau must be stamped with the appropriate level of competency seal. (WAC 212 -80)
24: Contact The Tukwila Fire Prevention Bureau to witness all required inspections and tests. (City Ordinances #2050 and
#2051)
25: To schedule all construction fire - related inspections send an e -mail to fireinsprequest @ci.tukwila.wa.us. Include your
name, telephone number, permit number, project name and address and type of inspection requested.
26: Any overlooked hazardous condition and/or violation of the adopted Fire or Building Codes does not imply approval of
such condition or violation.
27: These plans were reviewed by Inspector 512. If you have any questions, please call Tukwila Fire Prevention Bureau at
(206)575 -4407.
doc: Cond - 10/06
* *continued on next page **
M08 -002 Printed: 05-14 -2008
• •
City of Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206 - 431 -3670
Fax: 206 - 431 -3665
Web site: http: / /www.ci.tukwila.wa.us
I hereby certify that I have read these conditions and will comply with them as outlined. All provisions of law and
this work will be complied with, whether specified herein or not.
The granting of this permit does not presume to give authority to violate or cancel the provision of any other work
construction or the performance of work.
doc: Cond - 10/06 M08 - 002
Date:
ordinances governing
or local laws regulating
Printed: 05 -14 -2008
SITE LOCATION
Site Address: r
Tenant Name: r Plic r S
Property Owners Name:
Mailing Address:
Name: m1 0r1 (.kl
Mailing Address: SI O.5 , 15t a&
E -Mail Address:ShGMflOfb er ra,Id4Jet.e yt
Company Name:
Mailing Address:
ail Address;
\n pplicationstpermit application (7 -2004)
•
CITY OF TUKWILA
Community Development Department
Public Works Department
Permit Center
6300 Southcenter Blvd., Suite 100
Tukwila, WA 98188
I Q31 Ptnjoqr £
Pace 1
Building :Permit No.
Mechanical Permit No. AA/0 0
Public Works Permit'No:
Project No.
(For office use only)
Applications and plans must_be in order to be acce ted for_ plan review.;
Applications will(notlbe accepted through thermail or bytfax.)
* *Please Print **
King Co Assessor's Tax No.:.
Suite Number:
New Tenant:
City
City
2w--,0‹-i- foci _
Floor:
❑ Yes
State
Day Telephone: 2/S ile ,54/46
40.444144A/Ld 104 9410
City State Zip
Fax Number: JO ?7J S 79 7
GENERAL CONTRACTOR INFORMATION - (Mechanical Contractor information on back page)
State
Day Telephone:
Contact Perso
E -Mail 'ress: Fax Number:
Con actor Registration Number: Expiration Date:
* *An original or notarized copy of current Washington State Contractor License must be presented at the time of permit issuance **
ARCHITECT OF RECORD - All plans must be wet stamped by Architect of Record .
Company Name:
Mailing Address:
State
State
Zip
Zip
Zip
City
Contac -rson: Day Telephone:
Fax Number:
ENGINEER OF RECORD - All plans must be wet stamped by Engineer of Record
Company Name:
Mailing Address
Zip
W
TUKWILA
!W
0
City
Contact ' son: Day Telephone:
E -M -il Address: Fax Number:
Unit Type: '
Qty
Unit Type:' °•.
Qty
Unit Type: . _
Qty
Boiler /Compressor:
Qty
Furnace<100K BTU
Air Handling Unit >10,000
CFM
Fire Damper
0 -3 HP /100,000 BTU
Furnace>100K BTU
Evaporator Cooler
Diffuser
3 -15 HP /500,000 BTU
Floor Furnace
Ventilation Fan
Thermostat
15 -30 HP /1,000,000 BTU
Suspended/Wall/Floor
Mounted Heater
Ventilation System
Wood/Gas Stove
30-50 HP /1,750,000 BTU
Appliance Vent
Hood
Water Heater
50+ HP /1,750,000 BTU
Heat/Refrig/Cooling
System
{
Incinerator - Domestic
Emergency
Generator
Air Handling Unit
<10,000 CFM
Incinerator — Comm/Ind
Other Mechanical
Equipment
Print Name:
' application (7.2004)
MECHANICAL CONTRACTOR INFORMATION
Company Name: E / 2 4'k 1/1 c
Mailing Address: _S/08 .1) S AA)
J
Contact Persons/` 1 UU(. I
E -Mail Address: 4.5hin n arthe G era/do-Jr, • Gm'!. Fax Number: 0263 1 .1 3-71' I
Contractor Registration Number: h7T7C j.4A /D rY 6 Expiration Date: (////a9
* *An original or notarized copy of current Washington State Contractor License must be presented at the time of permit issuance **
Valuation of Project (contractor's bid price): $ /4 Oa a
Scope of Work (please provide detailed information): .4a S f�
o T zi•
1
Use; Residential: New ❑ Replacement ❑
Commercial: New 7 Replacement ❑
Fuel Type: Electric P Gas ❑ Other:
Indicate type of mechanical work being installed and the quantity below:
PERNIIT APPLICATION: NOTES Applicable to all permits in this application
�z.
Value of Construction — In all cases, a value of construction amount should be entered by the applicant. This figure will be reviewed and is subject
to possible revision by the Permit Center to comply with current fee schedules.
Expiration of Plan Review — Applications for which no permit is issued within 180 days following the date of application shall expire by limitation.
The Building Official may extend the time for action by the applicant for a period not exceeding 180 days upon written request by the applicant as
defined in Section 107.4 of the Uniform Building Code (current edition). No application shall be extended more than once.
I HEREBY CERTIFY THAT I HAVE READ AND EXAMINED THIS APPLICATION AND KNOW THE SAME TO BE TRUE UNDER
PENALTY OF PERJURY BY THE LAWS OF THE STATE OF WASHINGTON, AND I AM AUTHORIZED TO APPLY FOR THIS PERMIT.
BUILDING O R OR AUTHORLZED AGENT:
Signature:
5 h•1 C-4
Mailing Address: 5/0S , sr
Date Application Accepted:
Dll
Date Application Expires:
V 12
Staff Initials:
Page 4
Day Telephone:
n
City
�',�•,t tom. Zgli - ft""/
City State Zip
Day Telephone: G2 S) ? -l&)'
Date: I 13/ ■7
as3 surr r
w e- free
State Zip
Doc: RECSETS -06
RECEIPT NO: R08 -00013
Payee: EMERALD AIRE, INC
SET TRANSACTIONS:
Set Member Amount
ACCOUNT ITEM LIST:
Description
• w
City of Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206 -431 -3670
Fax: 206 -431 -3665
Web site: http : / /www. ci. tukwila. wa. us
EL08 -005 70.00
EL08 -006 66.00
M08 -002 269.58
TOTAL: 405.58
ELECTRICAL PERMIT - NONR
MECHANICAL - NONRES
PLAN CHECK - NONRES
SET RECEIPT
Initials: JEM Payment Date: 01/03/2008
User ID: 1165
Total Payment: 405.58
SET ID: S000000929 SET NAME: EMERALD AIRE
TRANSACTION LIST:
Type Method Description Amount
Payment Check 1100 405.58
TOTAL: 405.58
Account Code Current Pmts
000.322.101.00.0 136.00
000/322.100 221.66
000/345.830 47.92
TOTAL: 405.58
6759 01/03 9710 TOTAL 40558
A: 1031 Andover Park E, Tukwila, WA 98188-7615
PeWAPT1t1
City of Tulmlia
BUILDING DIVISION
Permit No
Plar review approval Is subject to errors and om!ssions.
Approval of construction documents does not authorize
the violation of any adopte e r ordinance. P.ecei7
of approved Fi Copy aru conditions is acknow!a
By
Date:
S Wv43 - SCAL:r..
REVISIONS
No changes shall be made to the scope
of work without prior approval of
Tukwila Building Division. --
NOTE: Revisions will require a new plan submittal
and may include additional plan review fees.
/ / I I
EMERALD AIRE
5108 D STREET NW: AUBURN. WA 98001
VOICE: (253) 872-5685 FAX: (253) 872-5797
• oeer Ai 8 'ovfrbeAp DOote
JOB:
NOTES:
SUBJECT:
FELLERS
DWG BY:
DATE:
1' oeer-05\
SEPARATE PERMIT
REQUIRED FOR:
0 Mechanical
CeBectrical
grPlUinbing
Elf Gas Piping
City of Tukwila
LBUILDING DIVISION
5 t,s
PAGE ,
OF
CIT1'SF
APR :4 0_2000
PERMIT CENTIER
1
INCOMPLTE
LT R#
0
•
C4
QJ
LU
-J
Ui
I-
0
z
LU
0
U)
Ui
<
0
Ii—
CVA 0,4'
t('
•
,
,e, D(Pc1,15Ee 2w° CFp 4-41(11_ 250 E A , 6tx) pvt*
t.3 I;
1
05c* I( AL 1.1KIE0 gt.Aft Dticr
IIDO • Fro/I! 0.)
!.. sr•Ps•lic:
loarao
i
HUOG ann. V 4F IN) ‘,.1/4.0(2 04.1 - (p‘L.
0(ivot-‘ SEcLi eD w 8 1i cram. C
cgt-
' CD Z Gm
I
C)
fuJE 0 co
1. 1c) g
:
'
ik r
Aul tem,/
1
G
CAN
es
?AN
o 10 D rep
Ve 5
•
■
-e_
3 / 2 , co46 fle
Er L 5e+ I ts x
• n-Qx DvA\t, ?P,L1
• is t.)4 rew v zs .#
MODEL
H1ZD018S06
H1ZD024S06
H1ZD030S061 H1Z0036S061H1ZD042S06
H1ZD048S061H1ZD060S06
Unit Supply Voltage
208 -230V, 14), 60Hz is
Normal Voltage Range 1
187 to 252
Minimum Circuit Ampacity
8.5
11.7
14.2
19.2
23.9
27.9
37.5 .4
Max. Overcurrent Device Amps 2
15
20
20
30
40
45
60
Min. Overcurrent Device Amps 3
15
15
15
20
25
30
40
Compressor Type
Recip
Recip
Recip
Recip
Scroll
Scroll
Scroll
Compressor Amps
Rated Load
6.4
8.96
10.7
14.7
17.9
21.1
28.8
Locked Rotor
47
48
57
83
112
115
150
Crankcase Heater
No
No
No
No
No
No
No
Fan Motor Amps Rated Load
0.5
0.5
0.8
0.8
1.5
1.5
1.5
Fan Diameter Inches
22
22
22
22
22
22
22
Fan Motor
Rated HP
1/15
1/15
1/8
1/8
1/4
1/4
1/4
Nominal RPM
830
830
1075
1075
850
850
850
Nominal CFM
2200
2200
2500
2700
3000
3000
3200
Coil
Face Area Sq. Ft.
15.71
15.71
15.71
20.96
20.96
20.96
23.58
Rows Deep
1
1
1
1
1
1
1
Fin / Inches
18
18
18
22
22
22
22
Liquid Line OD (Field Installed)
3/8
3/8
3/8
3/8
3/8
3/8
3/8
Vapor Line OD (Field Installed)
3/4
3/4
3/4
7/8
7/8
7/8
1 1/8
Unit Charge(Lbs. - Oz.) 4
6 -1
6 -2
6 -5
7 -13
8 -4
8 -7
9 -1
Charge Per Foot, Oz.
0.68
0.68
0.68
0.70
0.70
0.70
0.76 •
Operating Weight Lbs.
150
150
170
195
180
184
198
Unit
Model
Dimensions
(Inches)
Refrigerant Connection
Service Valve Size
A
B
C
Liquid
Vapor
18
27
37
27
24
27
37
27
3/4
30 .
27
37
27
36
35
37
27
3/8
42
35
37
27
7/8
48
35
37
27
60
39
37
27
7/8*
) i
TABULAR DATA SHEET
Outdoor Split System Air Conditioner 1.5 Thru 5 Tons
MODELS: H *ZD018* THRU 060*
13 SEER - R-410A
•
PHYSICAL AND ELECTRICAL DATA
1. Rated in accordance with ARI Standard 110, utilization range "A ".
2. Dual element fuses or HACR circuit breaker. Maximum allowable overcurrent protection.
3. Dual element fuses or HACR circuit breaker. Minimum recommended overcurrent protection.
4. The Unit Charge is correct for the outdoor unit, matched indoor coil and 15 feet of refrigerant tubing. For tubing lengths other than
15 feet, add or subtract the amount of refrigerant, using the difference in length multiplied by the per foot value. See the "Additional
R- 22/410A charge" for additional refrigerant needed for evaporator units.
Unitary Products Group
YORK°
All dimensions are in inches. They are subject to change withou
notice. Certified dimensions will be provided upon request.
1. Including Fan Guard.
• Adapter fitting required for 1 -1/8" line set.
250702 -YTD -C -0507
7
Heating and Air Conditioning
TECHNICAL GUIDE
SINGLE PIECE AIR HANDLERS
FOR USE WITH SPLIT - SYSTEM
COOLING & HEAT PUMPS
MODELS: AHP18 THRU 60 AND SHP48 THRU 60
WOO. re corrp�
Good Housekeeping
WINI If 1
ISO 9001
Certified Quality
Management System
Due to continuous product improvement, specifications
are subject to change without notice.
Visit us on the web at www.york.com
Additional rating information can be found at
www.ari.orgiaridirectory.
255029 -YTG -J -1007
DESCRIPTION
This fan coil line offers the ultimate in application flexibility.
The AHP (non - variable speed motor) models can be ordered
upflow only or as multi - position. The multi - position model can
be installed in downflow, upflow, horizontal right or left without
the need for additional field installed kits.
The SHP 48 & 60 models are upflow only models designed
into a shorter cabinet than the AHP version, for those special
applications where reduced height is required.
All UPG air handlers and coils utilize a TXV to provide our
customers with the optimum performance and refrigerant
control required for 13+ systems. Air handlers can be ordered
with a R22 TXV factory installed that can be easily converted
to R410A by changing the bolt -on TXV. Air handlers are also
available with "Flex - coils" without a factory installed metering
device. For added flexibility, an R22 or R410A TXV can be
field installed to meet your refrigerant choice.
FEATURES
Thermal Expansion Valve - Provides the ultimate refrigerant
control required for today's high efficient product. The UPG
bolt -on TXV provides the added flexibility to convert the air
handler to the required refrigerant. The UPG TXV is a true
bolt -on which does not require brazing to replace or install.
MicroBlue Coated Fins - All air handler coils are treated
with the MicroBlue hydrophilic coating to enhance the
removal of condensate during the refrigeration cycle and
reduce the possibility of water blow -off. The MicroBlue
coating also reduces the growth of germ causing microbes
for a healthier home environment.
Insulated Cabinet - All air handler cabinets are thermally
insulated with 1" foil faced insulation (R -4.2) to prevent
sweating. For applications in extreme humidity conditions an
optional, field installed, external insulating wrap kit is also
available.
Durable Finish Inside and Out - Air handler casings are
made of pre - painted galvanized steel which provides a better
paint to steel bond that resists corrosion and rust creep. All
internal coil sheet metal parts are made of G90 pre - painted
steel (i.e. triangular plates, top plates, horizontal supports
etc). Coil header plates are not painted due to the brazing
process during production. The coil header plates are treated
after the brazing process with a corrosion resistant spray to
reduce the probability of rust.
High Efficiency - 5 ton unit has high efficiency DC motor.
New 4 HK Heat Kit - Installation friendly, easy service, more
robust, unique to new design.
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
MODELS
Dimensions
Wiring Knockouts)
Refrigerant
Connections
Line Size
A
B
C
D
E
F
J
K
Height
Width
Depth
Power
Control
Liquid
Vapor
AHP18B3X(N,H)21
AHP18B2A(N,H)21
46
17.5
21.5
12 -3/8
13 -29/32
14 -19/32
7/8" (1/2 ")
1 3/8" (1 ")
1 23/32" (1 1/4 ")
s
7/8" (1/2 ")
3/8"
3/4"
AHP24B3X(N,H)21
AHP24B2A(N,H)21
46
17.5
12 -3/8
13 -29/32
14 -19/32
3/4"
AHP3063X(N,H)21
AHP30B2A(N,H)21
46
17.5
12 -3/8
13 -29/32
14 -19/32
3/4"
AHP36C3X(N,H)21
AHP36C2A(N,H)21
52
21
17 -1/8
17 -13/32
18 -3/32
7/8"
AHP42C3X(N,H)21
AHP42C2C(N,H)21
52
21
17 -1/8
17 -13/32
18 -3/32
7/8"
AHP48D3X(N,H)21
AHP48D2C(N,H)21
57
24.5
22 -1/8
20 -29/32
21 -19/32
7/8"
SHP48D3XN21
SHP48D2CN21
52
24.5
17 -1/8
20 -29/32
21 -19/32
7/8"
AHP60D3X(N,H)21
AHP60D2C(N,H)21
57
24.5
22 -1/8
20 -29/32
21 -19/32
7/8'
SHP60D3XN21
SHP60D2CN21
52
24.5
17 -1/8
20 -29/32
21 -19/32
7/8"
r
AHP / SHP MODEL SHOWN
Dimensions
1. Actual size (Conduit size .
H indicates 4 position model
Unitary Products Group
255655-YSD-C-0906
BLOWER
COMPARTMENT
REFRIGERANT
CONNECTIONS
D
7 -11/32
FILTER
ACCESS
B
DRAIN CONNECTIONS
FOR UPFLOW AND
DOWNFLOW
APPLICATIONS
DRAIN PAN CONNECTIONS
FOR HORIZONTAL APPLICATIONS
F
100 -3/B'
CIRCUIT BREAKER
PANEL
TOP OUTLET
DIMENSIONS
BOTTOM INLET
DIMENSIONS
3
Models
AHP18B"(N,H)21
AHP24B"(N,H)21
AHP3OB**(N,H)21
AHP36C"(N,H)21
Blower - Diameter x Width
9 x 6
10 x 9
10 x 9
10 x 10
Motor
HP
1/3 HP
1/4 HP
1/2 HP
3/4 HP
Nominal RPM
1075
1075
1075
1075
Voltage
3.8 3.8 7.6
230
Amps
Full Load (230)
1.9 1.5 2.2 3.6
Filter
Type
DISPOSABLE OR PERMANENT
Size
16x20x1
16x20x1
16x20x1
20x20x1
Permanent Type Kit
1PF0601BK
1PF0601BK
1PF0601BK
1PF0602BK
Shipping / Operating
Weight (lbs.) - AHP * ** N1
128 / 122
132 / 126
139 / 133
162 / 156
Shipping / Operating Weight (lbs.) - AHP H1
131 / 125
135 / 129
142 / 136
165 / 159
Models
AHP42C ~(N,H)21
AHP48D" (N,H)21
SHP48D**N21
AHP60D" (N,H)21
SHP6OD**N21
Blower - Diameter x Width
10 x 10
10 x 10
11 x 10
Motor
HP
3/4 HP
3/4 HP
1 HP
Nominal RPM
1075
1075
1050
Voltage
AHP24B "(N,H)21
230
Amps
Full Load (230)
3.8 3.8 7.6
Filter
Type
DISPOSABLE OR PERMANENT
Size
20 x 20 x 1
22 x 20 x 1
22 x 20 x 1
Permanent Type Kit
1 PF0602BK
1 PF0603BK
1 PF0603BK
Shipping / Operating Weight (lbs.) -
AHP* * *N1 and SHP * ** N21
164 / 158
AHP - 186 / 175
SHP - 182 / 171
AHP - 189 / 178
SHP - 185 / 174
Shipping / Operating Weight (lbs.) - AHP H1
167 / 161
190 / 179
193 / 182
Models
Total Motor Amps
Minimum Circuit Ampacity
Max. O.C.P.
Amps/ Type
Minimum Wire
Size A.W.G.
60 Hertz
60 Hertz
208V
230V
208V
230V
AHP18B "(N,H)21
1.7
1.9
2.1
2.4
15
14
AHP24B "(N,H)21
1.4
1.5
1.8
1.9
15
14
AHP30B"(N,H)21
2
2.2
2.5
2.8
15
14
AHP36C "(N,H)21
3.3
3.6
4.1
4.5
15
14
AHP42C**(N,H)21
3.4
3.8
4.3
4.8
15
14
AHP48D "(N,H)21
3.4
3.8
4.3
4.8
15
14
SHP48D * *N21
3.4
3.8
4.3
4.8
15
14
AHP60D "(N,H)21
7.6
7.6
9.5
9.5
15
14
SHP6OD * *N21
7.6
7.6
9.5
9.5
15
14
PHYSICAL & ELECTRICAL DATA
1. Field Supplied.
ELECTRICAL DATA - COOLING ONLY (60 Hz)
255029 -YTG -J -1007
6
1. OCP = Over Current Protection device, must be HACR type Circuit Breaker or Time Delay fuse.
Unitary Products Group
TYPICAL APPLICATIONS
Subject to change without notice. Printed in U.S.A. 255655 -YSD -C -0906
Copyright m by York International/Johnson Controls Co. 2006. All rights reserved. Supersedes: 255655 -YSD -B -0506
Norman
5005
Unitary
Products York OK
7306
Group Drive
Mar
.w
. �
r+MC � �Yr9w
cross ventilation of the space. The installation of opera-
ble louvers shall not be prohibited.
3. Ventilation openings are not required where continu-
ously operated mechanical ventilation is provided at a
rate of 1.0 cubic foot per minute (cfm) for each 50 square
feet (1.02 Lis for each 10 m of crawl -space floor area
and the ground surface is covered with an approved
vapor retarder.
4. Ventilation openings are not required when the ground
surface is covered with an approved vapor retarder, the
perimeter walls are insulated and the space is condi-
tioned in accordance with the International Energy Con-
servation Code.
5. For buildings in flood hazard areas as established in Sec-
tion 1612.3, the openings for under -floor ventilation
shall be deemed as meeting the flood opening require-
ments of ASCE 24 provided that the ventilation openings
are designed and installed in accordance with ASCE 24.
❖ This section lists the locations and conditions where
ventilation openings can be omitted entirely or the
area of required openings can be reduced. Exception
1 could be used in•extremely cold climates, where ven-
tilation ot)e
gs are a serious breach of the structure op
in terms of energy usage. It provides for ventilating the op
crawl space to the interior conditioned space of the ing
building, which is heated and can accept moisture
from . the underground space without detrimental ef- T
ects
The use of a vapor retarder material on the ground
surface inhibits the flow of moisture from the ground'
surface into the crawl space and thus reduces, if not
virtually eliminates, the need for ventilation;. therefore,
Exception 2 provides for a drastic reduction in the
amount of ventilation openings required. While the va-
por retarder may significantly reduce the moisture ac-
cumulation, ventilation openings are still required but
may be equipped with manual dampers to permit them
to be closed during the coldest weeks of the year in
northern climates.
Exception 3 provides for the use of mechanical ven-
tilation, such as an exhaust fan similar to a bathroom
exhaust fan, to keep air moving through the crawl
space. A vapor retarder on the ground surface is also
required when using Exception 3.
When a crawl space is provided with a vapor re-
tarder on the ground surface and is mechanically con-
ditioned and insulated, it becomes like any other
space in the conditioned structure and ventilation
openings are not required in accordance with Excep-
tion 4. Requirements for insulating structures are
found in the International Energy Conservation Code®
OECD!).
Section 1612.4 of the code requires buildings lo-
cated in flood hazard areas [as idenf
f on the building structu
eral Emergency Management Agency (FEMA), s e yard
Section
1612.3] to be constructed in accordance with 1203.4.
ASCE 24. Exception 5 is necessary to coordinate the out ope
requirements for openings in ASCE 24 with this sec- ing roo
tion. In most cases, the ventilation requirements of
Section 1203.3 are not satisfied by installation oft e
flood openings that meet the requirements for e n-
closed areas beneath elevated buildings and struc-
tures located in designated flood hazard areas. This is
because the flood opening requirements found in
ASCE 24 -98 and Section 1612.5 specify
openings are to be no more than 1 foot that m od
above the adjacent grade, while most airfl
owveto
that meet the requirements of Section 1203.3 are in-
stalled immediately below the elevated floor. If there is
a sufficient number of airflow vents that are located
within 1 foot (305 mm) of the adjacent grade, they may both the flood opening. requirements of ASCE
24 -98 and Section 1612.5 and the airflow ventilation
requirements of Section 1203.3. In either case, both
airflow ventilation and flood opening requirements
must be met for buildings and structures located in
designated flood hazard areas. For further guidance,
refer to FEMA publication FIA -TB 1, Openings in
Foundation Walls for Buildings Located in Special
Flood Hazard Areas.
1203.4 Natural ventilation. Natural ventil
pie
d space shall be through windows, doors,
tion of an occu-
louvers or other
enings to the .outdoors. The operating mechanism for such
enings shall be provided with ready access so that the open-
s are readily controllable by the building occupants.
tion for all occupied spaces. Openings to the l outdoor
air, such as doors, windows, louvers,. etc., provide nat-
ural ventilation. The section does not, however, state
or intend that the doors, windows or openings actually
be constantly open. The intent is that they be main-
tained in an operable condition so that they are avail-
able for use at the discretion of the occupant.
1203.4.1 Ventilation area required. The minimum openable
area to the outdoors shall be 4 percent of the floor area being
ventilated.
his section provides the standard of nat
❖ This section specifies the ratio of openable doors, win-
dows or openings to the floor space being ventilated
but does not address the distribution around the space
or location of these openings. It is the designer's pre-
rogative to distribute openings in such a manner as to
accomplish the natural ventilation of the space. When
inadequate natural ventilation is provided, mechanical
ventilation can supplement any inadequacy (see
Chapter 4 of the IMC). The plan reviewer can deter-
mine compliance with this section. For example, in
Figure 1203.4.1, the combined openable area (the
net -free area of a door, window, louver, vent or sky-
light, etc., when fully open) of double -hung windows B
and C is equal to 4 percent of the floor area [300 x 0.04
- 12
A is
eet (1 m The openable area of window
not required and need not open onto a court or
complying with Section 1206.
1.1 Adjoining spaces. Where rooms and spaces with -
nings to the outdoors are ventilated through an adjoin -
m, the opening to the adjoining room shall be
ACTIVITY NUMBER: M08 - 002 DATE: 04 - -
PROJECT NAME: FELLER SIGN COMPANY
SITE ADDRESS: 1031 ANDOVER PK E
Original Plan Submittal X Response to Incomplete Letter # 1
Response to Correction Letter # Revision # After Permit Issued
DEPARTMENTS:
Build g Division
Public Works
Complete
Comments:
Documents/routing slip.doc
2 -28 -02
illbERMIT C(7CMu Vvpy
PLAN REVIEW /ROUTING SLIP
Fire Prevention
Structural
DETERMINATION OF COMPLETENESS: (Tues., Thurs.)
Incomplete n
Permit Center Use Only
INCOMPLETE LETTER MAILED: LETTER OF COMPLETENESS MAILED:
Departments determined incomplete: Bldg ❑ Fire ❑ Ping ❑ PW ❑ Staff Initials:
TUES/THURS ROU 'ING:
Please Route Structural Review Required
REVIEWER'S INITIALS:
APPROVALS OR CORRECTIONS:
Approved ❑ Approved with Conditions
Notation:
REVIEWER'S INITIALS:
n
n
❑ Permit Coordinator
DUE DATE: 05-01-08
No further Review Required
DATE:
DUE DATE: 0529-08
Not Approved (attach comments) ri
DATE:
Planning Division
Not Applicable
n
Permit Center Use Only
CORRECTION LETTER MAILED:
Departments issued corrections: Bldg ❑ Fire ❑ Ping ❑ PW ❑ Staff Initials:
ACTIVITY NUMBER: M08 -002 DATE: 01 -03 -08
PROJECT NAME: FELLER SIGN COMPANY
SITE ADDRESS: 1031 ANDOVER PK E
X Original Plan Submittal
Response to Correction Letter #
Response to Incomplete Letter #
Revision # After Permit Issued
DEPARTMENTS:
Q�
Buildin_��ivi
Public Works
Complete
Comments:
REVIEWER'S INITIALS:
Documents/routing slip.doc
2 -28 -02
op PERMIT COORD CO111
PLAN REVIEW /ROUTING SUP
it'
n
APPROVALS OR CORRECTIONS:
X12 hoo /toy
Fire Prevention
Structural
DETERMINATION OF COMPLETENESS: (Tues., Thurs.)
Incomplete
Approved Approved with Conditions
Notation:
REVIEWER'S INITIALS:
n Permit Coordinator
LETTER OF COMPLETENESS MAILED:
Planning Division
n
n
DUE DATE: 01 -08-08
Not Applicable n
Permit Center Use Only
INCOMPLETE LETTER MAILED: 01
Departments determined incomplete: Bldg Fire ❑ Ping ❑ PW ❑ Staff Initials:.
TUES/THURS ROUTING:
Please Route n Structural Review Required n No further Review Required
DATE:
DUE DATE: 02- 05-08
Not Approved (attach comments) n
DATE:
Permit Center Use Only
CORRECTION LETTER MAILED:
Departments issued corrections: Bldg ❑ Fire ❑ Ping ❑ PW ❑ Staff Initials:
•
\applications \forms- applications on line\revision submittal
Created: 8 -13 -2004
Revised:
•
City of Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206- 431 -3670
Fax: 206 - 431 -3665
Web site: http: / /www.ci.tukwila.wa.us
Steven M Mullet, Mayor
Steve Lancaster, Director
Revision submittals must be submitted in person at the Permit Center. Revisions will not be accepted through
the mail, fax, etc.
Date: ' 130).0 Plan Check/Permit Number: M08 -002
• Response to Incomplete Letter # 1
❑ Response to Correction Letter #
❑ Revision # after Permit is Issued
❑ Revision requested by a City Building Inspector or Plans Examiner
Project Name: Feller Sign Company
Project Address: 1031 Andover Pk E
Contact Person: r 1 a1(g i P 40 (S1,01Z
Phone Number: -S3 'o �.(0(a1
Summary of Revision:
CITY OFTUKWILA
1 APR 3 0 2005
P.A« ' rk
Sheet Number(s):
"Cloud" or highlight all areas of revision including date of revision
Received at the City of Tukwila Permit Center by: ix%L lA-'
Entered in Permits Plus on Odk
April 29, 2008
To Whom It May Concern:
Please find replies to questions 1,2 for permit application M08-
002.
1)See enclosed 11 x 17 prints for site and floor plans.
2) See enclosed paragraph # 1203.4 from the 2006 I.B.C. to address the fresh air for
occupant load question. Fresh air is being introduced through 2 8' operable overhead
doors and 1- 3' swinging door.
Thank you
•
10 -01 -2008
SHANNON BUCKINGHAM
5108 D ST NW
AUBURN WA 98001
RE: Permit No. M08 -002
1031 ANDOVER PK E TUKW
Dear Permit Holder:
City of f Tula
Jim Haggerton, Mayor
Department of Community Development Jack Pace, Director
In reviewing our current records the above noted permit has not received a fmal inspection by the City of Tukwila Building Division.
Per the International Codes, Uniform Plumbing/Fuel Gas Code and/or the National Electrical Code, every permit issued by the
Building Division under the provisions of the code shall expire by limitation and become null and void if the building or work
authorized by such permit is not commenced within 180 days from the date of such permit issuance, or if the building or work
authorized by such permit is suspended or abandoned at any time after the work is commenced for a period of 180 days.
Based on the above, you are hereby advised to:
Call the City of Tukwila Inspection Request Line at 206 -431 -2451 to schedule for the next or fmal inspection.
This inspection is intended to determine if substantial work has been accomplished since issuance of the permit or last inspection; or if
the project should be considered abandoned.
If such determination is made, the International Codes, Uniform Plumbing/Fuel Gas Code and/or the National Electrical Code does
allow the Building Official to approve one extension of time for an additional period not exceeding 180 days. Extension requests
must be in writing and provide satisfactory reasons why circumstances beyond the applicants control have prevented action from
being taken.
In the event you do not call for the above inspection and receive an extension prior to 11/10/2008 , your permit will become null and
void and any further work on the project will require a new permit application and associated fees.
Thank you for your cooperation in this matter.
Sincerely,
fer Marshall
Pe?rfiit Technician
xc:
Permit File No. M08 -002
6300 Southcenter Boulevard, Suite #100 0 Tukwila, Washington 98188 o Phone: 206 - 431 -3670 a Fax: 206 - 431 -3665
January 14, 2008
Shannon Buckingham
5108 D St NW
Auburn WA 98001
RE: Letter of Incomplete Application # 1
Development Permit Application M08 -002
Feller Sign Co — 1031 Andover Pk E
Dear Ms. Buckingham,
This letter is to inform you that your permit application received at the City of Tukwila Permit Center on January 3, 2008
is determined to be incomplete. Before your application can continue the plan review process the following items from
the following department needs to be addressed:
Building Department: Dave Larson at 206 431 -3678 if you have any questions concerning the attached
comments.
Please address the comment above in an itemized format with applicable revised plans, specifications, and/or other
documentation. The City requires that two (2) sets of revised plans, specifications and/or other documentation be
resubmitted with the appropriate revision block.
In order to better expedite your resubmittal a `Revision Submittal Sheet' must accompany every resubmittal. I have
enclosed one for your convenience. Revisions must be made in person and will not be accepted through the mail or by
a messenger service.
If you have any questions, please contact me at the Permit Center at (206) 431 -3670.
Sincerely,
fifer Marshall
it Technician
1. Provide site plan and floor plans to show location of system.
2. Address fresh air for occupant load.
Enclosures
File: M08 -002
Cizy of Tukwila
P:\Permit Center\Incomplete Letters\2008\M08 -002 Incomplete Ltr #1.DOC
jem
Jim Haggerton, Mayor
Department of Community Development Jack Pace, Director
6300 Southcenter Boulevard, Suite #100 • Tukwila, Washington 98188 • Phone: 206 - 431 -3670 • Fax: 206 - 431 -3665
License Information
License
EMERAAI055BL
Licensee Name
EMERALD AIRE INC
Licensee Type
CONSTRUCTION CONTRACTOR
UBI
600591552
Ind. Ins. Account Id
VICE
PRESIDENT
Business Type
CORPORATION
Address 1
5108 D STREET NW
Address 2
06/01/2000
City
AUBURN
County
KING
State
WA
Zip
98001
Phone
2538725665
Status
ACTIVE
Specialty 1
GENERAL
Specialty 2
UNUSED
Effective Date
1/13/1995
Expiration Date
4/1/2009
Suspend Date
Separation Date
Parent Company
Previous License
SOUNDAI158OW
Next License
Associated License
Business Owner Information
Name
Role
Effective
Date
Expiration
Date
HAPPE, DOUGLAS A
PRESIDENT
01/01/2000
RIDGE, JOHN P
VICE
PRESIDENT
01/01/2000
RICHARDS, RON
SECRETARY
01/13/1995
06/01/2000
TREMAINE, DAVIS
WRIGHT
AGENT
01/13/1995
12/31/1999
DUPUIS - FRICKE, LINDA
PRESIDENT
01/13/1995
12/31/1999
HAPPE, DOUGLAS A
PRESIDENT
01/13/1995
12/31/1999
Look Up a Contractor, Electri n or Plumber License Detail
Washington State Department of Labor and Industries
General/Specialty Contractor
A business registered as a construction contractor with L &I to perform
construction work within the scope of its specialty. A General or Specialty
construction Contractor must maintain a surety bond or assignment of
account and carry general liability insurance.
•
Page 1 of 2
https: // fortress. wa. gov /lni/bbip /printer.aspx ?License= EMERAAI055BL 05/14/2008