HomeMy WebLinkAboutPermit M09-078 - BAYVIEW LIMOUSINEBAYVIEW LIMO
15701 NELSON PL
M09 -078
Parcel No.: 0005800026
Address:
Suite No:
15701 NELSON PL TUKW
Cityikf Tukwila
Tenant:
Name: BAYVIEW LIMO
Address: 15701 NELSON PL , TUKWILA WA
Owner:
Name: HANSEN GROUP LLC
Address: 14405 25TH AVE SW , BURIEN WA
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206 - 431 -3670
Fax: 206 - 431 -3665
Web site: http: / /www.ci.tukwila.wa.us
Contact Person:
Name: JIM STILL
Address: 5121 S BURLINGTON WY , TACOMA WA
Contractor:
Name: NARROWS HEATING /AIR COND INC
Address: 1601 6TH AVE , TACOMA, WA
Contractor License No: NARROI *216J3
MECHANICAL PERMIT
DESCRIPTION OF WORK:
ADD 2 -TON SPLIT - SYSTEM (DUCTLESS) AIR CONDITIONER TO EXISTING SERVER ROOM
Value of Mechanical: $4,981.00
Type of Fire Protection:
Furnace: <100K BTU
>100K BTU
Floor Furnace
Suspended/Wall/Floor Mounted Heater
Appliance Vent
Repair or Addition to Heat /Refrig /Cooling System....
Air Handling Unit <10,000 CFM
>10,000 CFM
Evaporator Cooler
Ventilation Fan connected to single duct
Ventilation System
Hood and Duct
Incinerator: Domestic
Commercial /Industrial
doc: IMC-10/06
EQUIPMENT TYPE AND QUANTITY
0
0
0
0
0
0
0
0
0
0
0
0
0
0
* *continued on next page **
M09 -078
a
Permit Number:
Issue Date:
Permit Expires On:
Phone:
Phone: 253 627 -7543
Phone: 253 - 627 -7543
Expiration Date: 04/05/2010
M09 -078
06/29/2009
12/26/2009
Fees Collected: $230.71
International Mechanical Code Edition: 2006
Boiler Compressor:
0 -3 HP /100,000 BTU 1
3 -15 HP /500,000 BTU 0
15 -30 HP /1,000,000 BTU.. 0
30 -50 HP /1,750,000 BTU.. 0
50+ HP /1,750,000 BTU 0
Fire Damper 0
Diffuser 0
Thermostat 0
Wood/Gas Stove 0
Water Heater 0
Emergency Generator 0
Other Mechanical Equipment
Printed: 06 -29 -2009
Permit Center Authorized Signature:
I hereby certify that I have read and
Print Name:
doc: IMC -10/06
•
City of Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206 - 431 -3670
Fax: 206 - 431 -3665
Web site: http://www.ci.tukwila.wa.us
governing this work will be compile , whether specified herein or not.
•
Permit Number: M09 -078
Issue Date: 06/29/2009
Permit Expires On: 12/26/2009
V AA- I Date: Del/I2,� O
ned this permit and know the same to be true and correct. All provisions of law and ordinances
The granting of this permit does not presume to give authority to violate or cancel the provisions of any other state or local laws regulating
construction or the performance of work. I am authorized to sign and obtain this mechanical permit.
Signature: Date:
This permit shall become null and void if the work is not commenced within 180 days from the date of issuance, or if the work is suspended
or abandoned for a period of 180 days from the last inspection.
M09 -078 Printed: 06 -29 -2009
Parcel No.: 0005800026
Address:
Suite No:
Tenant:
•
City of Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206 - 431 -3670
Fax: 206 - 431 -3665
Web site: http://www.ci.tukwila.wa.us
15701 NELSON PL TUKW
BAYVIEW LIMO
1: ** *BUILDING DEPARTMENT CONDITIONS * **
PERMIT CONDITIONS
Permit Number:
Status:
Applied Date:
Issue Date:
M09 -078
ISSUED
06/18/2009
06/29/2009
2: No changes shall be made to the approved plans unless approved by the design professional in responsible charge and the
Building Official.
3: All mechanical work shall be inspected and approved under a separate permit issued by the City of Tukwila Permit Center
(206/431 - 3670).
4: All permits, inspection records, and approved plans shall be at the job site and available to the inspectors prior to
start of any construction. These documents shall be maintained and made available until final inspection approval is
granted.
5: All construction shall be done in conformance with the approved plans and the requirements of the International
Building Code or International Residential Code, International Mechanical Code, Washington State Energy Code.
6: Manufacturers installation instructions shall be available on the job site at the time of inspection.
7: All plumbing and gas piping work shall be inspected and approved under a separate permit issued by the Cityof Tukwila
Permit Center.
8: All electrical work shall be inspected and approved under a separate permit issued by the City of Tukwila Building
Department (206- 431 - 3670).
9: VALIDITY OF PERMIT: The issuance or granting of a permit shall not be construed to be a permit for, or an approval of,
any violation of any of the provisions of the building code or of any other ordinances of the City of Tukwila. Permits
presuming to give authority to violate or cancel the provisions of the code or other ordinances of the City of Tukwila
shall not be valid. The issuance of a permit based on construction documents and other data shall not prevent the
Building Official from requiring the correction of errors in the construction documents and other data.
doc: Cond -10/06
* *continued on next page **
M09 -078 Printed: 06 -29 -2009
i
City of Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206 - 431 -3670
Fax: 206 - 431 -3665
Web site: http: / /www.ci.tukwila.wa.us
I hereby certify that I have read these conditions and will comply with them as outlined. All provisions of law and
this work will be complied with, whether specified herein or not.
The granting of this permit does not presume to give authority to violate or cancel the provision of any other work
construction or the performance of work.
Signature: 1"1i
Print Name: i4f k I E L'T
doc: Cond -10!06 M09 -078
Date: Co
ordinances governing
or local laws regulating
Printed: 06 -29 -2009
CITY OF TUKWILA
Community Development Department
Permit Center
6300 Southcenter Blvd., Suite 100
Tukwila, WA 98188
http://www.ci.tukwila.wa.us
MECHANICAL PERMIT APPLICATION
Applications and plans must be complete in order to be accepted for plan review.
Applications will not be accepted through the mail or by fax.
* *Please Print **
SITE LOCATION
r King Co Assessor's Tax No.: �i
�
Site Address: 1' 1 C (1.4 E'
Tenant Name: ( I UMn
Property Owners Name: f t' N C )P �
Mailing Address:1`1Qt . 1VA �A
City
CONTACT PERSON - Who do
co'
en your per
t is ready to be issued
Name: art
Mailing Address: `711�i Y Z- X• WAY
E -Mail Address: JIi e l"P` -+ k kr7t •
MECHANICAL CONTRACTOR INFORMATION
Company Name:T P' i - gnh - a A>/c.
Mailing Address: `Z't VAT UAL(
Contact Person: JIM 'STIL -t—
E -Mail Address:
Contractor Registration Number: tl ZiC..J'3
ARCHITECT OF RECORD -All plans must be wet stamped by Architect of Record
Company Name:
Mailing Address:
State
Contact Person:
E -Mail Address:
H. \Applications \Forms - Applications On Line \2009 Applications \I -2009- Mechanical Permit Application. doc
Revised. 1 -2(0)9
bh
Mechanical Fermi
Project No.
Suite Number:
New Tenant:
WA'
State
Floor:
❑ Yes N..No
Zip
Day Telephone:
VJA
City State Zip
Fax Number: V ' ' S1 -
City
Day Telephone:
Fax Number:
Expiration Date:
tAtA
State
Zip
City
Day Telephone:
Fax Number:
Zip
ENGINEER OF RECOI
- All plans
must be we stamped by E
gineer of Recor
Company Name:
Mailing Address:
cit
Contact Person: Day Telephone:
E -Mail Address: Fax Number:
State
Zip
Page 1 of 2
Unit Type:
Qty
Unit Type:
Qty
Unit Type:
Qty>
Boiler /Compressor:
Qty
Furnace <100K BTU
Air Handling Unit >10,000
CFM
Fire Damper
0 -3 HP /100,000 BTU
Furnace >100K BTU
Evaporator Cooler
Diffuser
3 -15 HP /500,000 BTU
Floor Furnace
Ventilation Fan Connected
to Single Duct
Thermostat
15 -30 HP /1,000,000
BTU
Suspended/Wall/Floor
Mounted Heater
Ventilation System
Wood/Gas Stove
30 -50 HP /1,750,000
BTU
Appliance Vent
Hood and Duct
Emergency Generator
50+ HP /1,750,000 BTU
Repair or addition to
Heat/Refrig/Cooling System
Incinerator — Domestic
Other Mechanical
Equipment
Air Handling Unit <10,000
CFM
Incinerator — Comm /Ind
Valuation of Project (contractor's bid price): $ ► I 'e` 1
Scope of Work (please provide detailed information): i\� 1 2— iAn-1 " sY -1 C►� (,�Cf�'
(z Cvc�iDlTl "rx%' t - stf- - '1
Use: Residential: New
Commercial: New
Fuel Type: Electric ❑ Gas ❑ Other:
Indicate type of mechanical work being installed and the quantity below:
PERMIT APPLICATION NOTES -
Value of Construction — In all cases, a value of construction amount should be entered by the applicant. This figure will be reviewed and is subject
to possible revision by the Permit Center to comply with current fee schedules.
Expiration of Plan Review — Applications for which no permit is issued within 180 days following the date of application shall expire by limitation.
The Building Official may grant one extension of time for additional periods not to exceed 90 days each. The extension shall be requested in writing
and justifiable cause demonstrated. Section 105.3.2 International Building Code (current edition).
1 HEREBY CERTIFY THAT I HAVE READ AND EXAMINED THIS APPLICATION AND KNOW THE SAME TO BE TRUE UNDER
PENALTY OF PERJURY BY THE LAWS OF THE STATE OF WASHINGTON, AND I AM AUTHORIZED TO APPLY FOR THIS PERMIT.
Signature:
Print Name:
bh
Replacement
Replacement
BUILDING OWNER R AUTHORIZED AGENT:
I Date Application Accepted:
Jt BT U. --
Mailing Address: E' Z 4 - ‘4144T (/U'r
Ola llt1a)
Date Application Expires:
HI\Applications\ Forms - Applications On Line \2009 Applicati ns \I- 2009 - Mechanical Permit Application. doc
Revised: 1 -2109
Date:
Day Telephone: - Cot- 75+
LOA 1V4G9
City State Zip
Staff Initials:
age 2 of 2
Receipt No.: R09 -00919
Initials:
User ID:
Payee:
JEM
1165
TRANE
ACCOUNT ITEM LIST:
Description
MECHANICAL - NONRES
PLAN CHECK - NONRES
• •
City of Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206 -431 -3670
Fax: 206 -431 -3665
Web site: http: / /www.ci.tukwila.wa.us
TRANSACTION LIST:
Type Method Descriptio Amount
Parcel No.: 0005800026 Permit Number: M09 -078
Address: 15701 NELSON PL TUKW Status: PENDING
Suite No: Applied Date: 06/18/2009
Applicant: BAYVIEW LIMO Issue Date:
Payment Check 22995 230.71
Authorization No.
RECEIPT
Account Code Current Pmts
000.322.102.00.0 184.57
000/345.830 46.14
Total: $230.71
Payment Amount: $230.71
Payment Date: 06/18/2009 01:05 PM
Balance: $0.00
PAYMENT
RECEIVED
doc: Receiot -06 Printed: 06 -18 -2009
Proj A ∎A e ! L it _/ Q 0
Type of I� fiction: e q
Ad res e I
5 (n r /tee &v /�tw
Date Called:
Special Instructions: J
2 -o,1 sp I��r . S Sr?
f
O u c. 1 • SS -i r '�b .
e....>;:-St J e.fv 1 ) Phone
Date Wanted: a.m.
7'"(0-07 .m
11
Requester:
No S — 2 55 --I 3S3
INSPECTION RECORD
Retain a .copy with permit
INSPECTION NO.
CITY OF TUKWILA BUILDING DIVISION
6300 Southcenter Blvd., #100, Tukwila, WA 98188
M Vi PERMIT NO.
(206)431 -3670
Approved per applicable codes. Corrections required prior to approval.
COMMENTS:
Inspector:
1 Dat 7 - D
$60.00 REINSPECTION FEE REOUIR 'ED. Prior to inspection, fee must be.
paid at 6300 Southcenter Blvd., Suite 100. Call to schedule reinspection.
Receipt No.:
'Date:
COMMENTS:
Type of Inspection:
/Mit, h —
--
() , y- ,:v - /4 „ MG4.._,
Address:
/370 / AA450 sv
/-
Date Called:
A ar -”
/1 f, b A/ Pi? /j f./
/
d l
p.m.
Requester:
Phone No: _
cR-5 S 2
S `
7 `.?S -- S
/\
Project:
R/ y v /e J ...e
Type of Inspection:
/Mit, h —
Address:
/370 / AA450 sv
/-
Date Called:
Special Instructions:
Date Wanted:
7— / -
d l
p.m.
Requester:
Phone No: _
cR-5 S 2
S `
7 `.?S -- S
INSPECTION NO.
INSPECTION RECORD
Retain a copy with permit
,'2a -o 78
PERMIT NO.
CITY OF TUKWILA BUILDING DIVISION ?-
6300 Southcenter Blvd., #100, Tukwila, WA 98188 (206)431 -3670
• "Approved per applicable codes. Corrections required prior to approval.
Inspect
Date:
4 — / — "7
.00 REINSPECTION EE R QUIRED. Prior to inspection, fee must be
aid at 6300 Southcente Blvd., Suite 100. Call to schedule reinspection.
R ceipt No.:
Date:
P
AC -1
CONDENSATE PIPING
0
r - T
I I-
i 1
1RE FRIGERANT PIPING
SEPARATE PERMIT
REQUIRED FOR:
Mechanical �
Belxu
Plumbing
taGas Piping
City of Tukwila
LBU" ntN DIVISION
REVISIONS
No changes shall be made to the scope
of work without prior approval of
Tukwila Building Division.
NOTE: Revisions will require a new plan submittal
and may include additional plan review fees
MECIIANICAL FLOOR PLAN
V
SC. 1/4" = 1' -OIL
OUTDOOR COOLING UNIT
COOLING
UNIT MFG. MODEL RATED MINIMUM SEER
NO. NO. CAPACITY CAPACITY
INDOOR COOLING UNIT
INDOOR UNIT
UNIT MFG. MODEL CFM MCA V/PH
NO. NO.
WC -1 FUJITSU AOU -30CLX 647 7.7 208/1
1. POWER IS SUPPLIED FROM THE OUTDOOR UNIT (AC -1).
EXISTIN SUPPLY AIR
GRILLE DUCT FOR
VENTALPTION
COMMISSIONING
Plan review approval Is subject to errors and omissions.
Approval of construction documents does not authorize
the violation of any adopted code or ordinance. Receipt
of approved Field Copy : conditions is acknowledged
® City Of Tukwila
BUILDING DIVISION
General Mechanical Notes:
New AC unit shall be interlocked with existing system, and shall not perform while in heating mode.
System shall operate by remote temperature controller with preset schedules.
All ventilation requirements provided by existing system.
All refrigerant shall be R -410A.
All refrigerant piping shall be insulated with 1/2' wall armaflex as a minimum.
Provide asbuilt construction documents to owner within 90 days of job completion. Per WSEC 1416
Provide 0 & M manuals to owner within 90 days of job completion. Per WSEC 1416.2
Provide start up, check equipment & control operation, owner orientation. Per WSEC 1616.4
Sequence of operation
1. Remote temperature controller shall control unoccupied and occupied status of fan
system based on adjustable seven day program. Fan shall run continuously in
occupied mode and cycle in unoccupied mode.
2. Adjustable cooling set points shall control space temperature by activating cooling equipment.
As -Built Record Drawings
1. Provide As -built drawings with information specified in WSEC 1416.1 to Owner within 90 days of
system start-up & test.
O&M Manuals
1. Provide Operation and Maintenance Manuals with required information specified in WSEC 1416.2 to
Owner within 90 days of completion.
Systems Commissioning
1. All HVAC control systems shall be tested in accordance with WSEC 1416.4.1 and 1416.6.2.
2. For all HVAC units, verify that controls activate both heating and cooling modes, for all available
stages. Fan is required to run during all occupied hours. Verify initial programming of controls system.
Verify unit operation per Narrows Heating & A/C Start-up and Test Report.
3. For all HVAC units provided with economizers, verify that stage 1 cooling activates economizer
V mpers and allows outside air to cool space Verify that economizer dampers modulate in stage 2
en mechanical cooling is energized per WSEC 1413.
4. A Preliminary Commissioning Report shall be prepared, with required information specified in WSEC
Permi Permit mot, r1/� ��Q ,4,6.4.2.2.,.
t 1 ( ot, A ) 5. A Final Commissioning Report per WSEC 1416.4.2.2.2. shall be prepared and filed with the owner
0110 Iu isdiction for Final Certificate of Operation.
LEGEND
EXISTING SUPP
AIR GRILLE
EXISTING RETU
AIR GRILLE
REVIEWED FOR
CODE COMPLIANCE
APPROVED 1
JUN 2 5 2009
/riff
City otakwila
UILDING DIVISION
REMOTE TEMPERATURE CONTROLLER
REFRIGERANT PIPING
CONDENSATE PIPING
2'r FLEXIBLE DUCT
RECEIV D
CITY OF TU LA
JUN 1: 8 2009
PERMIT CENTER
VICINITY MAP
NTS
AREA OF WORK
NORTH
NORTH
1
NOTE
THIS PLAN IS FOR DIAORAMATIC PURPOSES ONLY.
THE EQUIPMENT, DUCTWORK AND ACCESSORIES
SHOWN HERE ARE SUBJECT TO CHANGE IN LOCATION,
ELIMINATION OR ADDITIONAL EQUIPMENT IS ALSO
POSSIBLE.
haw ow. -. ' --
:". ;: -;
z
z
0
N
O
0
0
E 'I
W0
z�
c7)
0a
a
a
0
Co w
co 0
u7
r-1
M -
REMARKS
REMARKS
WT
WT.
MCA
MOCP
V/PH
AC -1
FUJITSU
ASU -30CLX
30,700
9,900
15.00
22
30
208/1
137
5/8" S.L. - 3/8" L.L.
P
AC -1
CONDENSATE PIPING
0
r - T
I I-
i 1
1RE FRIGERANT PIPING
SEPARATE PERMIT
REQUIRED FOR:
Mechanical �
Belxu
Plumbing
taGas Piping
City of Tukwila
LBU" ntN DIVISION
REVISIONS
No changes shall be made to the scope
of work without prior approval of
Tukwila Building Division.
NOTE: Revisions will require a new plan submittal
and may include additional plan review fees
MECIIANICAL FLOOR PLAN
V
SC. 1/4" = 1' -OIL
OUTDOOR COOLING UNIT
COOLING
UNIT MFG. MODEL RATED MINIMUM SEER
NO. NO. CAPACITY CAPACITY
INDOOR COOLING UNIT
INDOOR UNIT
UNIT MFG. MODEL CFM MCA V/PH
NO. NO.
WC -1 FUJITSU AOU -30CLX 647 7.7 208/1
1. POWER IS SUPPLIED FROM THE OUTDOOR UNIT (AC -1).
EXISTIN SUPPLY AIR
GRILLE DUCT FOR
VENTALPTION
COMMISSIONING
Plan review approval Is subject to errors and omissions.
Approval of construction documents does not authorize
the violation of any adopted code or ordinance. Receipt
of approved Field Copy : conditions is acknowledged
® City Of Tukwila
BUILDING DIVISION
General Mechanical Notes:
New AC unit shall be interlocked with existing system, and shall not perform while in heating mode.
System shall operate by remote temperature controller with preset schedules.
All ventilation requirements provided by existing system.
All refrigerant shall be R -410A.
All refrigerant piping shall be insulated with 1/2' wall armaflex as a minimum.
Provide asbuilt construction documents to owner within 90 days of job completion. Per WSEC 1416
Provide 0 & M manuals to owner within 90 days of job completion. Per WSEC 1416.2
Provide start up, check equipment & control operation, owner orientation. Per WSEC 1616.4
Sequence of operation
1. Remote temperature controller shall control unoccupied and occupied status of fan
system based on adjustable seven day program. Fan shall run continuously in
occupied mode and cycle in unoccupied mode.
2. Adjustable cooling set points shall control space temperature by activating cooling equipment.
As -Built Record Drawings
1. Provide As -built drawings with information specified in WSEC 1416.1 to Owner within 90 days of
system start-up & test.
O&M Manuals
1. Provide Operation and Maintenance Manuals with required information specified in WSEC 1416.2 to
Owner within 90 days of completion.
Systems Commissioning
1. All HVAC control systems shall be tested in accordance with WSEC 1416.4.1 and 1416.6.2.
2. For all HVAC units, verify that controls activate both heating and cooling modes, for all available
stages. Fan is required to run during all occupied hours. Verify initial programming of controls system.
Verify unit operation per Narrows Heating & A/C Start-up and Test Report.
3. For all HVAC units provided with economizers, verify that stage 1 cooling activates economizer
V mpers and allows outside air to cool space Verify that economizer dampers modulate in stage 2
en mechanical cooling is energized per WSEC 1413.
4. A Preliminary Commissioning Report shall be prepared, with required information specified in WSEC
Permi Permit mot, r1/� ��Q ,4,6.4.2.2.,.
t 1 ( ot, A ) 5. A Final Commissioning Report per WSEC 1416.4.2.2.2. shall be prepared and filed with the owner
0110 Iu isdiction for Final Certificate of Operation.
LEGEND
EXISTING SUPP
AIR GRILLE
EXISTING RETU
AIR GRILLE
REVIEWED FOR
CODE COMPLIANCE
APPROVED 1
JUN 2 5 2009
/riff
City otakwila
UILDING DIVISION
REMOTE TEMPERATURE CONTROLLER
REFRIGERANT PIPING
CONDENSATE PIPING
2'r FLEXIBLE DUCT
RECEIV D
CITY OF TU LA
JUN 1: 8 2009
PERMIT CENTER
VICINITY MAP
NTS
AREA OF WORK
NORTH
NORTH
1
NOTE
THIS PLAN IS FOR DIAORAMATIC PURPOSES ONLY.
THE EQUIPMENT, DUCTWORK AND ACCESSORIES
SHOWN HERE ARE SUBJECT TO CHANGE IN LOCATION,
ELIMINATION OR ADDITIONAL EQUIPMENT IS ALSO
POSSIBLE.
haw ow. -. ' --
:". ;: -;
z
z
0
N
O
0
0
E 'I
W0
z�
c7)
0a
a
a
0
Co w
co 0
u7
r-1
M -
REMARKS
WT
31
1
P
AC -1
CONDENSATE PIPING
0
r - T
I I-
i 1
1RE FRIGERANT PIPING
SEPARATE PERMIT
REQUIRED FOR:
Mechanical �
Belxu
Plumbing
taGas Piping
City of Tukwila
LBU" ntN DIVISION
REVISIONS
No changes shall be made to the scope
of work without prior approval of
Tukwila Building Division.
NOTE: Revisions will require a new plan submittal
and may include additional plan review fees
MECIIANICAL FLOOR PLAN
V
SC. 1/4" = 1' -OIL
OUTDOOR COOLING UNIT
COOLING
UNIT MFG. MODEL RATED MINIMUM SEER
NO. NO. CAPACITY CAPACITY
INDOOR COOLING UNIT
INDOOR UNIT
UNIT MFG. MODEL CFM MCA V/PH
NO. NO.
WC -1 FUJITSU AOU -30CLX 647 7.7 208/1
1. POWER IS SUPPLIED FROM THE OUTDOOR UNIT (AC -1).
EXISTIN SUPPLY AIR
GRILLE DUCT FOR
VENTALPTION
COMMISSIONING
Plan review approval Is subject to errors and omissions.
Approval of construction documents does not authorize
the violation of any adopted code or ordinance. Receipt
of approved Field Copy : conditions is acknowledged
® City Of Tukwila
BUILDING DIVISION
General Mechanical Notes:
New AC unit shall be interlocked with existing system, and shall not perform while in heating mode.
System shall operate by remote temperature controller with preset schedules.
All ventilation requirements provided by existing system.
All refrigerant shall be R -410A.
All refrigerant piping shall be insulated with 1/2' wall armaflex as a minimum.
Provide asbuilt construction documents to owner within 90 days of job completion. Per WSEC 1416
Provide 0 & M manuals to owner within 90 days of job completion. Per WSEC 1416.2
Provide start up, check equipment & control operation, owner orientation. Per WSEC 1616.4
Sequence of operation
1. Remote temperature controller shall control unoccupied and occupied status of fan
system based on adjustable seven day program. Fan shall run continuously in
occupied mode and cycle in unoccupied mode.
2. Adjustable cooling set points shall control space temperature by activating cooling equipment.
As -Built Record Drawings
1. Provide As -built drawings with information specified in WSEC 1416.1 to Owner within 90 days of
system start-up & test.
O&M Manuals
1. Provide Operation and Maintenance Manuals with required information specified in WSEC 1416.2 to
Owner within 90 days of completion.
Systems Commissioning
1. All HVAC control systems shall be tested in accordance with WSEC 1416.4.1 and 1416.6.2.
2. For all HVAC units, verify that controls activate both heating and cooling modes, for all available
stages. Fan is required to run during all occupied hours. Verify initial programming of controls system.
Verify unit operation per Narrows Heating & A/C Start-up and Test Report.
3. For all HVAC units provided with economizers, verify that stage 1 cooling activates economizer
V mpers and allows outside air to cool space Verify that economizer dampers modulate in stage 2
en mechanical cooling is energized per WSEC 1413.
4. A Preliminary Commissioning Report shall be prepared, with required information specified in WSEC
Permi Permit mot, r1/� ��Q ,4,6.4.2.2.,.
t 1 ( ot, A ) 5. A Final Commissioning Report per WSEC 1416.4.2.2.2. shall be prepared and filed with the owner
0110 Iu isdiction for Final Certificate of Operation.
LEGEND
EXISTING SUPP
AIR GRILLE
EXISTING RETU
AIR GRILLE
REVIEWED FOR
CODE COMPLIANCE
APPROVED 1
JUN 2 5 2009
/riff
City otakwila
UILDING DIVISION
REMOTE TEMPERATURE CONTROLLER
REFRIGERANT PIPING
CONDENSATE PIPING
2'r FLEXIBLE DUCT
RECEIV D
CITY OF TU LA
JUN 1: 8 2009
PERMIT CENTER
VICINITY MAP
NTS
AREA OF WORK
NORTH
NORTH
1
NOTE
THIS PLAN IS FOR DIAORAMATIC PURPOSES ONLY.
THE EQUIPMENT, DUCTWORK AND ACCESSORIES
SHOWN HERE ARE SUBJECT TO CHANGE IN LOCATION,
ELIMINATION OR ADDITIONAL EQUIPMENT IS ALSO
POSSIBLE.
haw ow. -. ' --
:". ;: -;
z
z
0
N
O
0
0
E 'I
W0
z�
c7)
0a
a
a
0
Co w
co 0
u7
r-1
M -
Cooling Equipment Schedule
Equip.
ID
Brand Name'
Model No.'
Capac
Btu /
y ' _ I Viral ry. ii
I ••
..L ii. ire
. SEER
or EER
IPLV
Location
Efficiency
M -1
N/A
Applicant Name:
�� � :
F
Applicant Address:
RECEIVE
CITY OF TU 1 A
Applicant Phone:
253.627.7543
APPR 'VED
JUN 2 20119
JUN 1.8 2009
PERMITCENTER
ail/ of kwila
Fan Equipment Schedule
Equip.
ID
Brand Name'
Model No.'
CFM
SP'
HP /BHP
Flow Control
Location of Service
Efficiency
N/A
N/A
Applicant Name:
Narrows Heating & Air Conditioning,
Inc
Applicant Address:
RECEIVE
CITY OF TU 1 A
Applicant Phone:
253.627.7543
JUN 1.8 2009
PERMITCENTER
Heating Equipment Schedule WILL/111U UIVI�I�JIV r
Equip.
ID
Brand Name'
Model No.'
Capacity
Btu /h
Total CFM
OSA cfm
or Econo?
Input Btuh
Output Btuh
Efficiency
Tukwila, WA
N/A
Applicant Name:
Narrows Heating & Air Conditioning,
Inc
Applicant Address:
5121 So. Burlington Way
Applicant Phone:
253.627.7543
Project Info
Project Address
Bayview Limousine
Date 6/17/2009
15701 Nelson Place South
For Building Dept. Use
. 11111giViiirANk^ r-...
Tukwila, WA
Applicant Name:
Narrows Heating & Air Conditioning,
Inc
Applicant Address:
5121 So. Burlington Way
Applicant Phone:
253.627.7543
Mechanical Summary
MECH -SUM
2006 Washington State Nonresidential Energy Code Compliance Forms
Project Description
Briefly describe mechanical
system type and features.
❑ Includes Plans
2006 Washington State Nonresidential Energy Code Compliance Form
Revised July 2007
1 - Ductless Split System Air Conditioner PgYrth .�r
PIa. n rAviptat �n
oval Is s ubject to erro
f rI►(!tine• 'I,'-.... .
Include documentation requiring compliance with commissioning requirements, Section 1416.
Compliance Option
C ) Simple System 0 Complex System Q Systems Analysis
(See Decision Flowchart (over) for qualifications. Use separate MECH -SUM for simple & complex systems.)
Equipment Schedules
The following information is required to be incorporated with the mechanical equipment schedules on the
plans. For projects without plans, fill in the required information below.
'If available. 2 As tested according to Table 14 -1A through 14 -1G. 3 If required. ° COP, HSPF, Combustion Efficiency, or AFUE, as
applicable. 5 Flow control types: variable air volume(VAV), constant volume (CV), or variable speed (VS).
M 0 61 1 14
System Description
If Heating /Cooling
El
Constant vol?
El
Air cooled? • Packaged sys? El <20,000 Btuh?
See Section 1421 for full description
or Cooling Only:
Split system?
Economizer included?
•
•
of Simple System qualifications.
If Heating Only:
<
<5000 cfm?
<70 /a outside air?
<70%
■
•
Mechanical Summary (back)
MECH -SUM
Decision Flowchart
Use this flowchart to determine if project qualifies for Simple System Option. If not, either the
Complex System or Systems Analysis Options must be used.
C START )
Heating Only
2006 Washington State Nonresidential Energy Code Compliance Form
Reference
Section 1421
Heating /Cooling
or Cooling Only
Simple System
Allowed
(section 1420)
No
otal Ca .
wo economize
<240,000 Btuh
or 10 %?
Reference
Section 1423)
Use Complex
Systems
(section 1430)
Complex Systems
Refer to MECH -COMP Mechanical Complex Systems for assistance in determining which Complex
Systems requirements are applicable to this project.
Mechanical Permit Plans
2006 Washington State Nonresidential Energy Code Compliance Forms
Checklist
MECH -CHK
Revised July 2007
Project Address Bayview Limousine
Date 6/17/2009
The following information is necessary to check a mechanical permit application for compliance with the mechanical requirements in the
Washington State Nonresidential Energy Code.
Applicability
(yes, no, n.a.)
Code
Section
Component
Information Required
Location
on Plans
Building Department
Notes
HVAC REQUIREMENTS (Sections 1401 -1424)
1411
Equipment performance
1411.4
Pkg. elec. htg.& clg.
List heat pumps on schedule
yes
1411.1
Minimum efficiency
Equipment schedule with type, capacity, efficiency
m1
1411.1
Combustion htg.
Indicate intermittent ignition, flue /draft damper & jacket loss
1412
HVAC controls
yes
1412.1
Temperature zones
Indicate locations on plans
ml
n.a.
1412.2
Deadband control
Indicate 5 degree deadband minimum
1412.3
Humidity control
Indicate humidistat
yes
1412.4
Automatic setback
Indicate thermostat with night setback and 7 diff. day types
ml
n. a.
1412.4.1
Dampers
Indicate damper location and auto. controls & max. leakage
n.a.
1412.4.2
Optimum Start
Indicate optimum start controls
1412.5
Heat pump control
Indicate microprocessor on thermostat schedule
1412.6
Combustion htg.
Indicate modulating or staged control
1412.7
Balancing
Indicate balancing features on plans
1412.8
Ventilation Control
Indicate demand control ventilation for high- occupancy areas
1422
Thermostat interlock
Indicate thermostat interlock on plans
n.a.
1423
Economizers
Equipment schedule
1413
Air economizers
n.a.
1413.1
Air Econo Operation
Indicate 100% capability on schedule
n. a.
1413.1
Wtr Econo Operation
Indicate 100% capacity at 45 degF db & 40 deg F wb
1413.2
Water Econo Doc
Indicate clg load & water econoe & clg tower performance
n.a.
1413.3
Integrated operation
Indicate capability for partial cooling
n.a.
1413.4
Humidification Indicate direct evap or fog atomization w/ air economizer
1414
Ducting systems
n.a.
1414.1
Duct sealing
Indicate sealing necessary
n.a.
1414.2
Duct insulation
Indicate R -value of insulation on duct
n.a.
1415.1
Piping insulation
Indicate R -value of insulation on piping
1416
Completion Requirements
n.a.
1416.2.1
Commissioning
Provide commissioning plan
n. a.
1416.2.2 -3
Sys.Bal & Func.Test
Indicate air and water system balancing & functional testing
n.a.
1416.2.4
Commissioning
Indicate O &M manuals, record drawings, staff training
n.a.
1416.2.5
Comm. Report
Indicate requirements for prelim. & final commissioning report
1434
Separate air sys.
Indicate separate systems on plans
yes
Mechanical
Summary Form
Completed and attached. Equipment schedule with types,
input/output, efficiency, cfm, hp, economizer
SERVICE WATER HEATING AND HEATED POOLS (Sections 1440 - 1454)
1440
Service water htg.
1441
Elec. water heater
Indicate R -10 insulation under tank
1442
Shut -off controls
Indicate automatic shut -off
1443
Pipe Insulation
Indicate R -value of insulation on piping
1452
Heat Pump COP
Indicate minimum COP of 4.0
1452
Heater Efficiency
Indicate pool heater efficiency
1453
Pool heater controls
Indicate switch and 65 degree control
1454
Pool covers
Indicate vapor retardant cover
1454
Pools 90+ degrees
Indicate R -12 pool cover
2006 Washington State Nonresidential Energy Code Compliance Form
no is circles Tor any question, proviae explanation:
2006 Washington State Nonresidential Energy Code Compliance Form
Mechanical Permit Plans Checklist
MECH -CHk
2006 Washington State Nonresidential Energy Code Compliance Forms
Revised July 2007
Mechanical - General Requirements
1411.1 General: Equipment shall have a minimum performance at the specified
rating conditions not less than the values shown in Table 14 -1A through 14 -1G. If a
nationally recognized certification program exists for a product covered in Tables
14 -1A through 14 -1G, and it includes provisions for verification and challenge of
equipment efficiency ratings, then the product shall be listed in the certification
program.
Gas -fired and oil -fired forced air furnaces with input ratings > 225,000 Btu /h (65
kW) and all unit heaters shall also have an intermittent ignition or interrupted device
(IID), and have either mechanical draft (including power venting) or a flue damper. A
vent damper is an acceptable alternative to a flue damper for furnaces where
combustion air is drawn from the conditioned space. All furnaces with input ratings >
225,000 Btu /h (65 kW), including electric furnaces, that are not located within the
conditioned space shall have jacket losses not exceeding 0.75% of the input rating.
1411.2 Rating Conditions: Cooling equipment shall be rated at ARI test conditions
and procedures when available. Where no applicable procedures exist, data shall
be furnished by the equipment manufacturer.
1411.3 Combination Space and Service Water Heating: For combination space
and service water heaters with a principal function of providing space heat, the
Combined Annual Efficiency (CAE) may be calculated by using ASHRAE Standard
124 -1991. Storage water heaters used in combination space heat and water heat
applications shall have either an Energy FActor (EF) or a CAE of not less than the
following:
1411.4 Packaged Electric Heating and Coo ing Equipment: Packaged electric
equipment providing both heating and cooling with a total cooling capacity greater
than 20, Btu /h shall be a heat pump.
Exception: Unstaffed equipment shaelters or cabinets used solely for
personal wireless service facilities.
1412 Controls
1412.1 Temperature Controls: Each system shall be provided with at least one
temperature control device. Each zone shall be controlled by individual thermostatic
controls responding to temperature within the zone. At a minimum, each floor of a
building shall be considered as a separate zone.
1412.2 Deadband Controls: When used to control both comfort heating and
cooling, zone thermostatic controls shall be capable of a deadband of at least 5
degrees F within which the supply of heating and cooling energy to the zone is shut
off or reduced to a minimum.
Exceptions:
1. Special occupancy, special usage, or code requirements where
deadband controls are not appropriate.
2. Buildings complying with Section 1141.4, if in the proposed building
energy analysis, heating and cooling thermostat setpoints are set to
the same temperature between 70 degrees F and 75 degrees F
inclusive, and assumed to be constant throughout the year.
3. Thermostats that require manual changeover between heating and
cooling modes.
1412.3 Humidity Controls: If a system is equipped with a means for adding
moisture, a humidistat shall be provided.
1412.4 Setback and Shut -Off: HVAC systems shall be equipped with automatic
controls capable of accomplishing a reduction of energy use through control setback
or equipment shutdown during periods of non -use or alternate use of the spaces
served by the system. The automatic controls shall have a minimum seven -day
clock and be capable of being set for seven different day types per week. It must
retain programming and time for a power loss of 10 hours and include an accessible
manual override of up to 2 hours.
Exceptions:
1. Systems serving areas which require continuous operation at the
same temperature setpoint.
2. Equipment with full load demands of 2 kW (6,826 Btu /h) or less may
be controlled by readily accessible manual off -hour controls.
3. Systems controlled by an occupant sensor that is capable of shutting
the system off when no occupant is sensed for a period of up to 30
minutes.
4. Systems controlled solely by a manually operated timer capable of
operating the system for no more than two hours.
1412.4.1 Dampers: Outside air intakes, exhaust outlets and relief outlets serving
conditioned spaces shall be equipped with dampers which close automatically when
the system is off or upon power failure. Stair shaft and elevator shaft smoke relief
openings shall be equipped with normally open (fails to open upon loss of power)
dampers. These dampers shall remain closed until activated by the fire alarm
system or other approved smoke detection system.
Exceptions:
1. Systems serving areas which require continuous operation.
2. Combustion air intakes.
3. Gravity (nonmotorized) dampers are acceptable in buildings less
than 3 stories in height.
4. Gravity (nonmotorized) dampers are acceptable in exhaust and relief
outlets in the first story and levels below the first story of buildings
three or more stories in height.
1412.4.2 Optimum Start Controls: Heating and cooling systems with design supply
1412.8 Ventilation Controls for High- Occupancy Areas: Demand control
ventilation (DCV) is required for spaces that are larger than 500 ft2, have a design
occupancy for ventilation of greater than 40 people for 1000 ft2 of floor area, and are
served by systems with one or more of the following:
a. An air -side economizer,
b. Automatic modulating control of the outdoor air damper, or
c. A design outdoor airflow greater than 3000 cfm.
Exceptions:
1.Systems with energy recovery complying with Section 1436.
2. Multiple -zone systems without direct - digital control of individual zones
communicating with a central control panel.
3. Systems with a design outdoor airflow less than 1200 cfm.
4. Spaces where the supply airflow rate minus any makeup or outgoing
transfer air requirement is less than 1200 cfm.
1413 Air Economizers
1413.1 Operation: Air economizers shall be of automatically modulating outside and
return air dampers to provide 100 percent of the design supply air as outside air to
reduce or eliminate the need for mechanical cooling. Water economizers shall be
capable of providing the total concurrent cooling load served by the conneted
terminal equipment lacking airside economizer, at outside air temperatures of 45 ° F
dry- bulb /40 ° F wet -bulb and below. For this calculation, all factors including solar and
internal load shall be the same as those used for peak load calculations, except for
the outside temperatures.
Exception: Water economizers using air - cooled heat rejection equipment
may use a 35 ° F dry -bulb outside air temperature for this calculation. This
exception is limited to a maximum of 20 tons per building.
1413.2 Documentation: Water economizer plans submitted for approval shall
include the following information:
1. Maximum outside air conditions for which economizer is sized to provide
full cooling.
2. Design cooling load to be provided by economizer at this outside air
condition.
3. Heat rejection and terminal equipment performance data including model
number, flow rate, capacity, entering and leaving temperature in full
economizer cooling mode.
1413.3 Integrated Operation: Air economizers shall be capable of providing partial
cooling even when additional mechanical cooling is required to meet the remainder
of the cooling load.
Exceptions:
1. Individual, direct expansion units that have a rated capacity less than
65,000 Btu /h and use nonintegrated economizer controls that
preclude simultaneous operation of the economizer and mechanical
cooling.
2. Water - cooled water chillers with waterside economizer.
1413.4 Humidification: If an air economizer is required on a cooling system for
which humidification equipment is to be provided to maintain minimum indoor
humidity levels, then the humidifier shall be of the adiabatic type (direct evaporative
media or fog atomization type).
Exceptions:
1. Health care facilities where WAC 246- 320 -525 allows only steam
injection humidifiers in ductwork downstream of final filters. 1412.6
Combustion Heating Equipment Controls: Combustion heating
equipment with a capacity over 225,000 Btu /h shall have modulating
or staged combustion control.
2. Systems with water economizer
3. 100% outside air systems with no provisions for air recirculation to the
central supply fan.
4. Nonadiabatic humidifiers cumulatively serving no more than 10% of a
building's air economizer capacity as measured in cfm. This refers to
the system cfm serving rooms with stand alone or duct mounted
humidifiers.
1414 Ducting Systems
1414.1 Sealing: Duct work which is designed to operate at pressures above 1/2 inch
water column static pressure shall be sealed in accordance with Standard RS -18.
Extent of sealing required is as follows:
1. Static pressure: 1/2 inch to 2 inches; seal transverse joints.
2. Static pressure: 2 inches to 3 inches; seal all transverse joints and
longitudinal seams.
3. Static pressure: above 3 inches; seal all transverse joints, longitudinal
seams and duct wall penetrations.
Duct tape and other pressure sensitive tape shall not be used as the primary
sealant where ducts are designed to operate at static pressures of 1 inch W.C. or
greater.
1414.2 Insulation: Ducts and plenums that are constructed and function as part of
the building envelope, by separating interior space from exterior space, shall meet all
applicable requirements of Chapter 13. These requirements include insulation
installation, moisture control, air leakage, and building envelope insulation levels.
Unheated equipment rooms with combustion air louvers must be isolated from the
conditioned space by insulating interior surfaces to a minimum of R -11 and any
exterior envelope surfaces per Chapter 13. Outside air ducts serving individual
supply air units with less than 2,800 cfm of total supply air capacity shall be insulated
to a minimum of R -7 and are not considered building envelope. Other outside air
duct runs are considered building envelope until they,
1. connect to the heating or cooling equipment, or
2. are isolated from the exterior with an automatic shut -off damper complying
EF
CAE
< 50 gal storage
0.58
0.71
50 to 70 gal storage
0.57
0.71
> 70 gal storage
0.55
0.70
2006 Washington State Nonresidential Energy Code Compliance Form
Mechanical Permit Plans Checklist
MECH -CHk
2006 Washington State Nonresidential Energy Code Compliance Forms
Revised July 2007
Mechanical - General Requirements
1411.1 General: Equipment shall have a minimum performance at the specified
rating conditions not less than the values shown in Table 14 -1A through 14 -1G. If a
nationally recognized certification program exists for a product covered in Tables
14 -1A through 14 -1G, and it includes provisions for verification and challenge of
equipment efficiency ratings, then the product shall be listed in the certification
program.
Gas -fired and oil -fired forced air furnaces with input ratings > 225,000 Btu /h (65
kW) and all unit heaters shall also have an intermittent ignition or interrupted device
(IID), and have either mechanical draft (including power venting) or a flue damper. A
vent damper is an acceptable alternative to a flue damper for furnaces where
combustion air is drawn from the conditioned space. All furnaces with input ratings >
225,000 Btu /h (65 kW), including electric furnaces, that are not located within the
conditioned space shall have jacket losses not exceeding 0.75% of the input rating.
1411.2 Rating Conditions: Cooling equipment shall be rated at ARI test conditions
and procedures when available. Where no applicable procedures exist, data shall
be furnished by the equipment manufacturer.
1411.3 Combination Space and Service Water Heating: For combination space
and service water heaters with a principal function of providing space heat, the
Combined Annual Efficiency (CAE) may be calculated by using ASHRAE Standard
124 -1991. Storage water heaters used in combination space heat and water heat
applications shall have either an Energy FActor (EF) or a CAE of not less than the
following:
1411.4 Packaged Electric Heating and Coo ing Equipment: Packaged electric
equipment providing both heating and cooling with a total cooling capacity greater
than 20, Btu /h shall be a heat pump.
Exception: Unstaffed equipment shaelters or cabinets used solely for
personal wireless service facilities.
1412 Controls
1412.1 Temperature Controls: Each system shall be provided with at least one
temperature control device. Each zone shall be controlled by individual thermostatic
controls responding to temperature within the zone. At a minimum, each floor of a
building shall be considered as a separate zone.
1412.2 Deadband Controls: When used to control both comfort heating and
cooling, zone thermostatic controls shall be capable of a deadband of at least 5
degrees F within which the supply of heating and cooling energy to the zone is shut
off or reduced to a minimum.
Exceptions:
1. Special occupancy, special usage, or code requirements where
deadband controls are not appropriate.
2. Buildings complying with Section 1141.4, if in the proposed building
energy analysis, heating and cooling thermostat setpoints are set to
the same temperature between 70 degrees F and 75 degrees F
inclusive, and assumed to be constant throughout the year.
3. Thermostats that require manual changeover between heating and
cooling modes.
1412.3 Humidity Controls: If a system is equipped with a means for adding
moisture, a humidistat shall be provided.
1412.4 Setback and Shut -Off: HVAC systems shall be equipped with automatic
controls capable of accomplishing a reduction of energy use through control setback
or equipment shutdown during periods of non -use or alternate use of the spaces
served by the system. The automatic controls shall have a minimum seven -day
clock and be capable of being set for seven different day types per week. It must
retain programming and time for a power loss of 10 hours and include an accessible
manual override of up to 2 hours.
Exceptions:
1. Systems serving areas which require continuous operation at the
same temperature setpoint.
2. Equipment with full load demands of 2 kW (6,826 Btu /h) or less may
be controlled by readily accessible manual off -hour controls.
3. Systems controlled by an occupant sensor that is capable of shutting
the system off when no occupant is sensed for a period of up to 30
minutes.
4. Systems controlled solely by a manually operated timer capable of
operating the system for no more than two hours.
1412.4.1 Dampers: Outside air intakes, exhaust outlets and relief outlets serving
conditioned spaces shall be equipped with dampers which close automatically when
the system is off or upon power failure. Stair shaft and elevator shaft smoke relief
openings shall be equipped with normally open (fails to open upon loss of power)
dampers. These dampers shall remain closed until activated by the fire alarm
system or other approved smoke detection system.
Exceptions:
1. Systems serving areas which require continuous operation.
2. Combustion air intakes.
3. Gravity (nonmotorized) dampers are acceptable in buildings less
than 3 stories in height.
4. Gravity (nonmotorized) dampers are acceptable in exhaust and relief
outlets in the first story and levels below the first story of buildings
three or more stories in height.
1412.4.2 Optimum Start Controls: Heating and cooling systems with design supply
1412.8 Ventilation Controls for High- Occupancy Areas: Demand control
ventilation (DCV) is required for spaces that are larger than 500 ft2, have a design
occupancy for ventilation of greater than 40 people for 1000 ft2 of floor area, and are
served by systems with one or more of the following:
a. An air -side economizer,
b. Automatic modulating control of the outdoor air damper, or
c. A design outdoor airflow greater than 3000 cfm.
Exceptions:
1.Systems with energy recovery complying with Section 1436.
2. Multiple -zone systems without direct - digital control of individual zones
communicating with a central control panel.
3. Systems with a design outdoor airflow less than 1200 cfm.
4. Spaces where the supply airflow rate minus any makeup or outgoing
transfer air requirement is less than 1200 cfm.
1413 Air Economizers
1413.1 Operation: Air economizers shall be of automatically modulating outside and
return air dampers to provide 100 percent of the design supply air as outside air to
reduce or eliminate the need for mechanical cooling. Water economizers shall be
capable of providing the total concurrent cooling load served by the conneted
terminal equipment lacking airside economizer, at outside air temperatures of 45 ° F
dry- bulb /40 ° F wet -bulb and below. For this calculation, all factors including solar and
internal load shall be the same as those used for peak load calculations, except for
the outside temperatures.
Exception: Water economizers using air - cooled heat rejection equipment
may use a 35 ° F dry -bulb outside air temperature for this calculation. This
exception is limited to a maximum of 20 tons per building.
1413.2 Documentation: Water economizer plans submitted for approval shall
include the following information:
1. Maximum outside air conditions for which economizer is sized to provide
full cooling.
2. Design cooling load to be provided by economizer at this outside air
condition.
3. Heat rejection and terminal equipment performance data including model
number, flow rate, capacity, entering and leaving temperature in full
economizer cooling mode.
1413.3 Integrated Operation: Air economizers shall be capable of providing partial
cooling even when additional mechanical cooling is required to meet the remainder
of the cooling load.
Exceptions:
1. Individual, direct expansion units that have a rated capacity less than
65,000 Btu /h and use nonintegrated economizer controls that
preclude simultaneous operation of the economizer and mechanical
cooling.
2. Water - cooled water chillers with waterside economizer.
1413.4 Humidification: If an air economizer is required on a cooling system for
which humidification equipment is to be provided to maintain minimum indoor
humidity levels, then the humidifier shall be of the adiabatic type (direct evaporative
media or fog atomization type).
Exceptions:
1. Health care facilities where WAC 246- 320 -525 allows only steam
injection humidifiers in ductwork downstream of final filters. 1412.6
Combustion Heating Equipment Controls: Combustion heating
equipment with a capacity over 225,000 Btu /h shall have modulating
or staged combustion control.
2. Systems with water economizer
3. 100% outside air systems with no provisions for air recirculation to the
central supply fan.
4. Nonadiabatic humidifiers cumulatively serving no more than 10% of a
building's air economizer capacity as measured in cfm. This refers to
the system cfm serving rooms with stand alone or duct mounted
humidifiers.
1414 Ducting Systems
1414.1 Sealing: Duct work which is designed to operate at pressures above 1/2 inch
water column static pressure shall be sealed in accordance with Standard RS -18.
Extent of sealing required is as follows:
1. Static pressure: 1/2 inch to 2 inches; seal transverse joints.
2. Static pressure: 2 inches to 3 inches; seal all transverse joints and
longitudinal seams.
3. Static pressure: above 3 inches; seal all transverse joints, longitudinal
seams and duct wall penetrations.
Duct tape and other pressure sensitive tape shall not be used as the primary
sealant where ducts are designed to operate at static pressures of 1 inch W.C. or
greater.
1414.2 Insulation: Ducts and plenums that are constructed and function as part of
the building envelope, by separating interior space from exterior space, shall meet all
applicable requirements of Chapter 13. These requirements include insulation
installation, moisture control, air leakage, and building envelope insulation levels.
Unheated equipment rooms with combustion air louvers must be isolated from the
conditioned space by insulating interior surfaces to a minimum of R -11 and any
exterior envelope surfaces per Chapter 13. Outside air ducts serving individual
supply air units with less than 2,800 cfm of total supply air capacity shall be insulated
to a minimum of R -7 and are not considered building envelope. Other outside air
duct runs are considered building envelope until they,
1. connect to the heating or cooling equipment, or
2. are isolated from the exterior with an automatic shut -off damper complying
2006 Washington State Nonresidential Energy Code Compliance Form
1412.4.2 Optimum Start Controls: Heating and cooling systems with design supply 2. are isolated from the exterior with an automatic shut -off damper complying
air capacities exceeding 10,000 cfm shall have optimum start controls. Optimum with Section 1412.4.1.
start controls shall be designed to automatically adjust the start time of an HVAC Once outside air ducts meet the above listed requirements, any runs within
system each day to bring the space to desired occupied temperature levels conditioned space shall comply with Table 14 -5 requirements.
immediately before scheduled occupancy. The control algorithm shall, as a • Other ducts and plenums shall be thermally insulated per Table 14 -5.
minimum, be a function of the difference between space temperature and occupied Exceptions:
setpoint and the amount of time prior to scheduled occupancy.
1412.5 Heat Pump Controls: Unitary air cooled heat pumps shall include 1. Within the HVAC equipment.
microprocessor controls that minimize supplemental heat usage during start-up, set- 2. Exhaust air ducts not subject to condensation.
up, and defrost conditions. These controls shall anticipate need for heat and use 3. Exposed ductwork within a zone that serves that zone.
compression heating as the first stage of heat. Controls shall indicate when 1415 Piping Systems
supplemental heating is being used through visual means (e.g., LED indicators). 1415.1 Insulation: Piping shall be thermally insulated in accordance with Table 14 -6.
1412.6 Combustion Heating Equipment Controls: Combustion heating equipment Exception: Piping installed within unitary HVAC equipment.
with a capacity over 225,000 Btu /h shall have modulating or staged combustion Water pipes outside the conditioned space shall be insulated in accordance with
control. 000 Washington State Plumbing Code (WAC 51 -26)
EXCEPTIONS 1 Boilers 2 Radiant heaters 1416 Completion Requirements (Refer to NREC Section 1416 and the Building
1412.7 Balancing: Each air supply outlet or air or water terminal device shall have Commissioning Guidelines, published by the Building Commissioning Association,
a means for balancing, including but not limited to, dampers, temperature and for complete text and guidelines for building completion and commissioning
pressure test connections and balancing valves. requirements.)
ACTIVITY NUMBER: M09 -078 DATE: 06 -18 -09
PROJECT NAME: BAYVIEW LIMO
SITE ADDRESS: 15701 NELSON PL
X Original Plan Submittal
Response to Correction Letter #
Response to Incomplete Letter #
Revision # After Permit Issued
DEPARTMENTS:
.fYS Btu ' K ti i
Building Division
Public Works
DETERMINATION OF COMPLETENESS: (Tues., Thurs.)
Complete 0
Comments:
TUES /THURS ROUTING:
Please Route Iyj Structural Review Required n
REVIEWER'S INITIALS:
APPROVALS OR CORRECTIONS:
Approved ❑ Approved with Conditions
Notation:
REVIEWER'S INITIALS:
Documents/routing slip.doc
2 -28 -02
• PERMIT COORD COPY d
PLAN REVIEW/ROUTING SLIP
nt
( k 3
t e Prevention
n
Structural
Incomplete ri
Planning Division
Permit Coordinator
DUE DATE: 06-23-09
Not Applicable
Permit Center Use Only
INCOMPLETE LETTER MAILED: LETTER OF COMPLETENESS MAILED:
Departments determined incomplete: Bldg ❑ Fire ❑ Ping ❑ PW ❑ Staff Initials:
No further Review Required Ti
DATE:
DUE DATE: 07-21-09
Not Approved (attach comments)
DATE:
Permit Center Use Only
CORRECTION LETTER MAILED:
Departments issued corrections: Bldg ❑ Fire ❑ Ping ❑ PW ❑ Staff Initials:
Bond
Bond
Company
Name
Bond
Account
Number
Effective
Date
Expiration
Date
Cancel
Date
Impaired
Date
Bond
Amount
Received
Date
5
OHIO CAS
INS CO
2 734653
04/05/2002
Until
Cancelled
01/01/1980
ARCHIVED
$6,000.00
03/25/2002
4
OHIO
CASUALTY
INS CO
2734653
04/26/199804/05
/2002
12/04/2008
$4,000.00
Name
Role
Effective Date
Expiration Date
CALHOUN, STEVEN W
Effective
Date
01/01/1980
Status
CALHOUN, R MIKE
RAINIER
STUMP
GRINDING
01/01/1980
LANDSCAPING
CALHOUN, GAYLE L
9/28/1999
01/01/1980
ARCHIVED
STAAB, MARSHA J
SECRETARY
03/28/1995
12/04/2008
STAAB, DANIEL E
VICE PRESIDENT
04/23/1979
12/04/2008
License
Name
Type
Specialty 1
Specialty 2
Effective
Date
Expiration
Date
Status
RAINISG01608
RAINIER
STUMP
GRINDING
CONSTRUCTION CONTRACTOR
LANDSCAPING
EXCAVATION /GRADING
9/28/1999
9/9/2001
ARCHIVED
Untitled Page
S
r
General /Specialty Contractor
A business registered as a construction contractor with L£rl to perform construction work
within the scope of its specialty. A General or Specialty construction Contractor must
maintain a surety bond or assignment of account and carry general liability insurance.
Business and Licensing Information
Name NARROWS HEATING /AIR
CNDTNG, IN UBI No. 600304971
Phone 2536277543 Status ACTIVE
Address 5121 S BURLINGTON WAY License No. NARROI*216J3
Suite /Apt. License Type CONSTRUCTION
CONTRACTOR
City TACOMA Effective 4/23/1979
Date
State WA Expiration 4/5/2010
Date
Zip 984092805 Suspend Date
County PIERCE
Business Type Corporation
Parent
Company
Specialty 1 HTG /VENT /AIR
CONDITIONING
Specialty 2 UNUSED
Other Associated Licenses
Business Owner Information
Bond Information
Page 1 of 2
https: // fortress .wa.gov /lni/bbip/Detail.aspx 06/29/2009