HomeMy WebLinkAboutPermit M09-161 - ASHLEY FURNITUREASHLEY FURNITURE
17601 SOUTHCENTER PY
M09 -161
Parcel No.:
Address:
Suite No:
Tenant:
Name:
Address:
Owner:
Name:
Address:
Contact Person:
Name:
Address:
Contractor:
Name:
Address:
Contractor License No:
Value of Mechanical: $300.00
Type of Fire Protection:
doc: IMC -10/06
Citjilk Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206 - 431 -3670
Inspection Request Line: 206 - 431 -2451
Web site: http: / /wwwci.tukwila.wa.us
3523049087
17601 SOUTHCENTER PY TUKW
ASHLEY FURNITURE
17601 SOUTHCENTER PY , TUKWILA WA
LEVITZ TUKWILA LLC
180 N STETSON AVE #324 -D , CHICAGO IL
GREG MUNGER
17601 SOUTHCENTER PY , TUKWILA WA
OWNER AFFIDAVIT - GREG MUNGER
DESCRIPTION OF WORK:
DUST COLLECTOR FOR TABLE SAW, BAND SAW, AND CHOP SAW.
Furnace: <100K BTU 0
>100K BTU 0
Floor Furnace 0
Suspended/Wall/Floor Mounted Heater 0
Appliance Vent 0
Repair or Addition to Heat /Refrig /Cooling System.... 0
Air Handling Unit <10,000 CFM 0
>10,000 CFM 0
Evaporator Cooler 0
Ventilation Fan connected to single duct 0
Ventilation System 0
Hood and Duct 0
Incinerator: Domestic 0
Commercial/Industrial 0
MECHANICAL PERMIT
EQUIPMENT TYPE AND OUANTITY
* *continued on next page **
M09 -161
•
Permit Number:
Issue Date:
Permit Expires On:
Expiration Date:
Phone:
Phone: 253 740 -8103
Phone:
M09 -161
12/29/2009
06/27/2010
Fees Collected: $121.25
International Mechanical Code Edition: 2006
Boiler Compressor:
0 -3 HP /100,000 BTU 0
3 -15 HP /500,000 BTU 0
15 -30 HP /1,000,000 BTU.. 0
30 -50 HP /1,750,000 BTU.. 0
50+ HP /1,750,000 BTU 0
Fire Damper 0
Diffuser 0
Thermostat 0
Wood/Gas Stove 0
Water Heater 0
Emergency Generator 0
Other Mechanical Equipment
Printed: 12 -29 -2009
Permit Center Authorized Signature:
Signature:
Print Name:
doc: IMC -10/06
City of Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206 - 431 -3670
Inspection Request Line: 206 - 431 -2451
Web site: http: / /www.ci.tukwila.wa.us
6--(z 1 w
•
Permit Number: M09 -161
Issue Date: 12/29/2009
Permit Expires On: 06/27/2010
Date: 1 9 _ 2,e16`\
I hereby certify that I have read and e ''' ed this permit and know the same to be true and correct. All provisions of law and ordinances
governing this work will be complied hether specified herein or not.
The granting f this permit does not presume to give authority to violate or cancel the provisions of any other state or local laws regulating
construction the perforinance of work. I am authorized to sign and obtain this mechanical permit.
Date: / V
This permit shall become null and void if the work is not commenced within 180 days from the date of issuance, or if the work is suspended
or abandoned for a period of 180 days from the last inspection.
M09 -161 Printed: 12 -29 -2009
Parcel No.: 3523049087
Address:
Suite No:
Tenant:
ASHLEY FURNITURE
1: ** *BUILDING DEPARTMENT CONDITIONS * **
•
City of Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206 - 431 -3670
Fax: 206 - 431 -3665
Web site: http: / /www.ci.tukwila.wa.us
17601 SOUTHCENTER PY TUKW
PERMIT CONDITIONS
Permit Number:
Status:
Applied Date:
Issue Date:
M09 -161
ISSUED
12/17/2009
12/29/2009
2: No changes shall be made to the approved plans unless approved by the design professional in responsible charge and the
Building Official.
3: All permits, inspection records, and approved plans shall be at the job site and available to the inspectors prior to
start of any construction. These documents shall be maintained and made available until final inspection approval is
granted.
4: All construction shall be done in conformance with the approved plans and the requirements of the International
Building Code or International Residential Code, International Mechanical Code, Washington State Energy Code.
5: All electrical work shall be inspected and approved under a separate permit issued by the City of Tukwila Building
Department (206- 431- 3670).
6: VALIDITY OF PERMIT: The issuance or granting of a permit shall not be construed to be a permit for, or an approval of,
any violation of any of the provisions of the building code or of any other ordinances of the City of Tukwila. Permits
presuming to give authority to violate or cancel the provisions of the code or other ordinances of the City of Tukwila
shall not be valid. The issuance of a permit based on construction documents and other data shall not prevent the
Building Official from requiring the correction of errors in the construction documents and other data.
doc: Cond -10/06
* * continued on next page **
M09 -161 Printed: 12 -29 -2009
•
City of Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206 - 431 -3670
Fax: 206 - 431 -3665
Web site: http: / /www.ci.tukwila.wa.us
s
I hereby certify that I have read these conditions and will comply with them as outlined. All provisions of law and
this work will be complied with, whether specified herein or not.
The granting of this permit does not presume to give authority to violate or cancel the provision of any other work
construction or the performance of work.
Signature:
Print Name: tA , AN Gi
doc: Cond -10/06 M09 -161
Date:
ordinances governing
or local laws regulating
Printed: 12 -29 -2009
CITY OF TUKWILA
Community Development Department
Permit Center
6300 Southcenter Blvd., Suite 100
Tukwila, WA 98188
http://www.ci.tukwila.wa. us
SITE LOCATION
King Co Assessor's Tax No.:
Site Address: / 7 6 0 ( 5�■1l, cQ r.l -r Pkwy,
Tenant Name: Arn (6-y /fu2N' le
Property Owners Name: Le 0 TZ TV k W 1 l-0 LC C
Mailing Address: /3// /u4 w•Atz 6 k /EVE 7 6.
Name: CR6 ( At 14,1 4 - 6 ty
Mailing Address: SQ ►"` t /3-i ReoV (d
E -Mail Address: 6 (s ER-- L°' A St-k Le/t4 r <-
Company Name:
Mailing Address:
Contact Person:
E -Mail Address:
Contractor Registration Number:
Company Name:
Mailing Address:
I /A
"/A
Contact Person:
E -Mail Address:
Company Name: J•
Mailing Address:
•
MECHANICAL PERMIT APPLICATION
Mechanical Permit No.
Project No.
Applications and plans must be complete in order to be accepted for plan review.
Applications will not be accepted through the mail or by fax.
* *Please Print **
Contact Person:
E -Mail Address:
H:\ pplications\Forms- Applications On Line\2009 Applications \1-2009 - Mechanical Permit Application.doc
Revised: 1 -2009
bh
Suite Number:
City
Fax Number:
New Tenant:
L ° iOW.- 4 »/
City State
Floor:
ry Yes ❑..No
. CONTACT PERSON = Who do we contacrW your permits ready to be is
Day Telephone: 253 ` } 40 • k1
State Zip
MECHANICAL CONTRACTOR INFORMATION •
State
State
C3.4 5'
Zip
Zip
City
Day Telephone:
Fax Number:
Expiration Date:
ARCHITECT OF R All- plans; must`be,wet stamped by of Record
Zip
City
Day Telephone:
Fax Number:
ENGINEER OF RECORD —All plans must be wet stamped by Engineer of Record
State
Zip
City
Day Telephone:
Fax Number:
Page 1 of 2
Unit Type:
Qty
Unit Type:
Qty.
Unit Type:
Qty
Boiler /Compressor:
Qty
Furnace <100K BTU
Air Handling Unit >10,000
CFM
Fire Damper
0 -3 HP /100,000 BTU
Furnace >100K BTU
Evaporator Cooler
Diffuser
3 -15 HP /500,000 BTU
Floor Furnace
Ventilation Fan Connected
to Single Duct
Thermostat
15 -30 HP /1,000,000
BTU
Suspended/Wall/Floor
Mounted Heater
Ventilation System
Wood/Gas Stove
30 -50 HP /1,750,000
BTU
Appliance Vent
Hood and Duct
Emergency Generator
50+ HP /1,750,000 BTU
Repair or addition to
Heat/Refrig/Cooling System
Incinerator — Domestic
Other Mechanical
Equipment
Air Handling Unit <10,000
CFM
Incinerator — Comm/Ind
Valuation of Project (contractor's bid price): $ 30 o
Scope of Work (please provide detailed information): .V I r Cof/ET1 p #4/2 T4( JAW F 69iscg SRw
c 14 :TAN
Use: Residential: New ❑ Replacement ❑
Commercial: New Replacement ❑
Fuel Type: Electric ❑
Indicate type of mechanical work being installed and the quantity below:
Value of Construction — In all cases, a value of construction amount should be entered by the applicant. This figure will be reviewed and is subject
to possible revision by the Permit Center to comply with current fee schedules.
Expiration of Plan Review — Applications for which no permit is issued within 180 days following the date of application shall expire by limitation.
The Building Official may grant one extension of time for additional periods not to exceed 90 days each. The extension shall be requested in writing
and justifiable cause demonstrated. Section 105.3.2 International Building Code (current edition).
I HEREBY CERTIFY THAT I HAVE READ AND EXAMINED THIS APPLICATION AND KNOW THE SAME TO BE TRUE UNDER
PENALTY OF PERJURY BY THE LAWS OF THE STATE OF WASHINGTON, AND I AM AUTHORIZED TO APPLY FOR THIS PERMIT.
BUILDING OWNF OR AUTHORIZED AGENT:
Signature:
Print Name:
o F—
Mailing Address: SAwr r AY Y- il?tl.-)r
H: 1Applications\Forms- Applications On Line12009 Applica ions 11 -2009 - Mechanical Permit Application doe
Revised: 1.2009
bh
•
Gas ❑ Other:
Date: /z/ 7/
Day Telephone: Z53 • 7% x(43
City
State
Zip
Date Application Accepted:
11-
Date Application Expires:
°L el f t ^ E `u
Staff Initials:
ge 2 of 2
•
City of Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206 - 431 -3670
Fax: 206 - 431 -3665
Web site: http: / /www.ci.tukwila.wa.us
RECEIPT
Parcel No.: 3523049087 Permit Number: M09 -161
Address: 17601 SOUTHCENTER PY TUKW Status: PENDING
Suite No: Applied Date: 12/17/2009
Applicant: ASHLEY FURNITURE Issue Date:
Receipt No.: R09 - 02015
Initials: JEM Payment Date: 12/17/2009 11:38 AM
User ID: 1165 Balance: $0.00
Payee: GREGORY S MUNGER
TRANSACTION LIST:
Type Method Descriptio Amount
Payment Credit Crd VISA -
Authorization No. 03573C
ACCOUNT ITEM LIST:
Description
MECHANICAL - NONRES
PLAN CHECK - NONRES
121.25
Account Code Current Pmts
000.322.102.00.00 97.00
000.345.830 24.25
Total: $121.25
Payment Amount: $121.25
PAYMENT
RECEIVED
doc: Receiot -06 Printed: 12 -17 -2009
Tp f 1 seto Ades ae Cle
I1 t 6� —'
pca ntutosDt atd
ut 6 kte. / / 2 I - C / pm
,t1 - . s - Gr-p Rqetr
A` Po 74-1 „
Z
Proje
PERMIT NO.
(206)431 -3670
Approved per applicable codes. Corrections required prior to approval.
COMMENTS:
1 , -e7A4 ,i L-� ,c.� � (
2-
Inspe r: A . - 4 .dio k
Date:
❑ $60.00 REINSPECTION FEE REQUIRED. Prior to inspection, fee must be
paid at 6300 Southcenter Blvd., Suite 100. Call to schedule reinspection.
Receipt No.:
'Date:
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
105
110
115
120
125
130
135
140
145
150
155
160
165
170
175
180
185
190
195
200
205
210
215
220
225
230
235
240
245
250
255
260
265
270
275
280
285
290
295
Fisk COPY
Permit No.. V ) ° i 1 (D 1
i'ir.r review approval is subject to errors and omissions.
jl oval of construction documents does not authorize
•.oiation of any adopted code or ordinance. Receipt
approved Fidd Copy . nd conditions is acknowledged
ANNIE.
Assry cage
1125; NB= 1400
DELIVERY BAYS
Foam densfier • needs 12' x 12' working space
Baler - 24 long 7.5 wide, 6.5 tall.
TRASH/RECYCLE
office
mg
Office
S#
NB assmbly 3500
NB driver tin 2500
ASSEMBLY
whse
Office conf/
Vain
parts
EXISTING
SHOP
EXISTNG_'
CONNECTION
ID SHOWROOM
By
OUST PICK UP
Date:
Band Saw, Table Saw, Chop
Saw
FL
65
SHOP
IN
as
SHOP
OUT
16
15
14
13
LIFT TRAFFIC
12
11
10
LIFT TRAFFIC
REVISIONS
No changes shall be made to the scope
of +"irk without prior approval of
- •":_0(wi!a Building Division.
• _:0n3 1441 r. ?quire a new lan
- r; ;t;onal plan p submittal
�e cd
p an review faze, a
4000 sq; NB 5400
RECEIVING
1
H
B
F
B
T
B
L
R
A
c
K
S
Verticle baler for
plastic 7'x4'
C E IEWED FOR
0 COMPLIANCE
APPROVED
DEC 2 9 2009
� L CityofTukwiIa
B UILDING DIV1Sinnl
RfzCEJ1lED
CITY OF LA
ow 171009
PERMIT CENTER
MO"-UDL
FILE COPY
Wall-Mount Dust Collector
Parts List and Diagram
- REVIEWED FOR
CODE COMPLIANCE
APPROVED
23
City ot To
BUILDING DIVISI
RECEIVED
CITY OF TUKWILA
DEC 1 7 2009
25344
Initiated 9/19/OPERMIT CENTER
Congratulations on your purchase!
Before assembling your new Rockier Wall-Mount Dust
Collector, please read through and understand the
instructions and safety precautions outlined on the
reverse of this sheet.
This dust collection unit includes a single Z-Bracket for
simple and convenient wall-mounting. Additional
brackets (Rockier item #21537), as well as a full line of
wall-mounting Dust RightTM dust collection accessories,
are available at www.rockler.com, through the Rockier
catalog, or at Rockier stores nationwide.
Create with Confidence'
Hang it where
you need it
with a simple
Z-Bracket.
Additional
brackets are
sold separately.
No. Description Qty.
1 . ..Base 1
2 ...Filter Bag 1
3 ...Motor Bracket 1
4 ...Motor Packing 1
5 ...Power Cord 1
6 ...Bag Clamp 1
7 ...Hex Bolt 1/4" x 1/2" 12
8 ...Motor 1
9 ...Handle Foam 1" x 5" 1
10 ...Handle 1
11 . . .Pan Head Screw 2
12 ...Main Housing 1
13 ...Impeller 1
14 ...Impeller Washer 1
15 ...Cap Screw M6 x 20 1
25 16 ...Inlet Cover 4" 1
17 ...Safety Switch 1
18 ...Key 5 x 5 x 25 1
19 ...Hex Screw M5 x 9 12
20 ...Bag Clamp 1
21 ...Open End Wrench 10 x 12 . 1
22 .. .Z-Bracket 1
23 ...Cap 1" 1
24 ...Washer 1/4" 25 4
25 ...Phillips Screw 3/16" x 1 3
WOODWORKING AND HARDWARE as1VA
ROCKLER®
2008 Rockier Woodworking and Hardware
Important Safety Instructions
WARNING! To reduce the risk of fire, electric shock or injury:
• Read and understand this owner's manual and all labels on
the Dust Collection System before operating. Use only as
described in this manual. To avoid personal injury or damage
to Dust Collection System, use only recommended
accessories. Sparks inside the electrical parts can ignite
flammable vapors or dust.
• Always use safety glasses. Everyday eye glasses only have
impact resistant lenses. They are not safety glasses. Also use
a face or dust mask if conditions are dusty.
• Do not use this Dust Collection System near flammable or
combustible liquids, gases, gasoline or other fuels, lighter fluid,
cleaners, oil -based paints, natural gas, hydrogen, or explosive
dusts like coal dust, magnesium dust, grain dust and gun powder.
• Do not vacuum anything that is burning or smoking such as
cigarettes, matches or hot ashes.
• To avoid health hazards from vapors or dusts, do not vacuum
toxic materials.
• Do not use outdoors or on wet surfaces.
• Route vacuum hose and electric cord out of traffic areas.
• Do not allow to be used as a toy. Close attention is necessary
when used by or near children.
• Do not use without filter /dust bag and /or chip bag in place.
• To avoid injury from accidental starting, unplug power cord
before changing or cleaning filter /dust bag or chip bag.
Grounding Instructions
When using your Dust Collection System, follow basic safety
precautions as well as the following guidelines:
• In the event of a malfunction or breakdown, grounding
provides a path of least resistance for electric current to
reduce the risk of electric shock. This tool is equipped with an
electric cord having an equipment - grounding conductor and a
grounding plug. The plug must be plugged into a matching
outlet that is properly installed and grounded in accordance
with all local codes and ordinances.
• Do not modify the plug provided if it will not fit the outlet. Have
the proper outlet installed by a qualified electrician.
• Improper connection of the equipment grounding conductor
(which is green and may have a yellow stripe) can result in a
risk of electrical shock. If repair or replacement of the electric
cord or plug is necessary, do not connect the equipment -
grounding conductor to a live terminal.
• Check with a qualified electrician or service - person if the
grounding instructions are not completely understood, or if in
doubt as to whether the tool is properly grounded.
• Use only 3 -wire extension cords that have 3 -prong grounding
plugs and 3 -pole receptacles that accept the tool's plug.
• Repair or replace damaged or worn cord immediately.
•
•
•
•
•
•
•
Do not unplug by pulling on cord. Grasp the plug, not the cord.
Turn off controls before unplugging.
Do not leave appliance plugged in. Unplug from outlet when
not in use and before servicing.
Do not use with damaged cord, plug or other parts. If your
Dust Collection System is not working as it should, has
missing parts, has been dropped, damaged, left outdoors, or
dropped into water, return it to Service Center.
Do not pull or carry by cord, use cord as handle, close a door
on cord, or pull cord around sharp edges or corners. Do not
run Dust Collection System over cord. Keep cord away from
heated surfaces.
Do not handle plug -in with wet hands.
Do not put any object into ventilation openings. Do not vacuum
with any ventilation openings blocked. Keep free of dust, lint,
hair or anything that may reduce air flow.
Keep hair, loose clothing, fingers and all parts of body away
from openings and moving parts.
Never leave tool running and unattended.
• Extension cords in poor condition or that are too small can
pose fire and shock hazards. When using an extension cord,
be sure it is in good condition. See "Extension Cords" in the
"Operation" section for proper wire sizes.
• Connect to properly grounded outlet only (See "Grounding
Instructions" below).
Grounding
Plug A
Cover of
grounded
outlet box
• This tool is intended for use with outlets like the one illustrated
in Figure A. An adapter like the one illustrated in Figures B
and C may be used to connect the grounding plug to a 1 -pole
receptacle as shown in Figure B if a properly grounded outlet
is not available. The temporary adapter should be used only
until a properly grounded outlet can be installed by a qualified
electrician. The green- colored rigid ear, lug, etc. extending
from the adapter must be connected to a permanent ground
like a properly grounded outlet box.
Note: The type of electrical plug and receptacle differs from
country to country.
Caution: In Canada only the grounding shown in Figure A is
acceptable. The extension cords should be CSA certified S.J.T.
type or something better.
Caution: In Australia only the grounding shown in Figure D is
acceptable. The extension cords should be SAA certified.
B
Adapter
C
Grounding
Pin
Limited Warranty
For a period of one (1) year from delivery, Rockier Woodworking and Hardware
warrants to the original purchaser that this product purchased is free from defects
in material and workmanship and agrees to repair or replace, at its option, any
defective product or part of product. This warranty does not apply to products
which, after our inspection, are determined to have been damaged due to misuse,
abuse, negligence, accidents, repairs or alterations or lack of maintenance.
ROCKIER
WOODWORKING AND HARDWARE
4365 Willow Drive
Medina, MN 55340
1- 800 - 279 -4441
ACTIVITY NUMBER: M09 -161 DATE: 12 -17 -09
PROJECT NAME: ASHLEY FURNITURE
SITE ADDRESS: 17601 SOUTHCENTER PY
X Original Plan Submittal
Response to Correction Letter #
Response to Incomplete Letter #
Revision # after Permit Issued
DEPARTMENTS:
sti " Z � "C
Building Iv
Public Works n
DETERMINATION OF COMPLETENESS: (Tues., Thurs.)
Complete
Comments:
• PERMITC40RUCOPY
PLAN REVIEW /ROUTING SLIP
4t reven ion
Structural
Incomplete
TUES/THURS ROUTING:
Please Route Structural Review Required ❑
REVIEWER'S INITIALS:
APPROVALS OR CORRECTIONS:
Documents/routing slip.doc
2 -28 -02
DATE:
Planning Division
n Permit Coordinator
DUE DATE: 12-22-09
Not Applicable
No further Review Required n
Permit Center Use Only
INCOMPLETE LETTER MAILED: LETTER OF COMPLETENESS MAILED:
Departments determined incomplete: Bldg ❑ Fire ❑ Ping ❑ PW ❑ Staff Initials:
DUE DATE: 01-19-10
Approved n Approved with Conditions n Not Approved (attach comments) ❑
Notation:
REVIEWER'S INITIALS:
DATE:
Permit Center Use Only
CORRECTION LETTER MAILED:
Departments issued corrections: Bldg ❑ Fire ❑ Ping ❑ PW ❑ Staff Initials:
CITY OF TUKWILA
Department of Community Development
630o Southcenter Boulevard, Tukwila, WA 98188
Telephone: (206) 431 -3670 FAX (206) 431 -3665
E - mail: tukplanPci.tukwila.wa.us
AFFIDAVIT IN LIEU OF CONTRACTOR REGISTRATION
STATE OF WASHINGTON)
) ss.
COUNTY OF KING )
[please print name)
, states as follows:
Owner /O . r' /' en
Signed and sworn to before me this
Permit Center /Building Division
206 431 -3670
Public Works Department
206 433 - 0179
Planning Division
206 431 -3670
PERMIT NO: 10 0 4 I 1
1. I have made application for a permit from the City of Tukwila, Washington.
2. I understand that state law requires that all building construction contractors be registered with the
State of Washington. The exceptions to this requirement are stated under Section 18.27.090 of the
Revised Code of Washington, a copy of which is printed on the reverse side of this Affidavit. I have
read or am familiar with RCW 18.27.090.
3. I understand that prior to issuance of a permit for work which is to be done by any contractor, the
City of Tukwila must verify either that the contractor is registered by the State of Washington, or that
one of the exemptions stated under RCW 18.27.090 applies.
4. In order to provide verification to the City of Tukwila of my compliance with this requirement, I
hereby attest that after reading the exemptions from the registration requirement of RCW 18.27.090,
I consider the work authorized under this permit to be exempt under number _ , and will therefore
not be performed by a registered contractor.
5. I understand that the licensing provision of RCW 19.28.161 through 19.28.271 shall not apply to
persons making electrical installations on their own property or to regularly employed employees
working on the premises of their employer. The proposed electrical work is not for the construction
of a new building for rent, sale or lease.
I understand that I may be waiving certain rights that I might otherwise have under state law in any decision
to engage an unregistered contractor to perform construction work.
NOTARY PUBLIC in and for the State of Washington
Residing at :\ A-j County
Name as commissioned: SIAS ►1 '' w 4--
My commission expires: _ 10 (90i
18.27.090 Exemptions. The registration provisions of this chapter do not apply to:
1. An authorized representative of the United States
government, the state of Washington, or any incorporated
city, town, county, township, irrigation district, reclamation
district, or other municipal or political corporation or
subdivision of this state;
2. Officers of a court when they are acting within the scope
of their office;
3. Public utilities operating under the regulations of the
utilities and transportation commission in construction,
maintenance, or development work incidental to their own
business;
4. Any construction, repair, or operation incidental to the
discovering or producing of petroleum or gas, or the
drilling, testing, abandoning, or other operation of any
petroleum or gas well or any surface or underground mine
or mineral deposit when performed by an owner or lessee;
5. The sale of any finished products, materials, or articles of
merchandise that are not fabricated into and do not become
a part of a structure under the common law of fixtures;
6. Any construction, alteration, improvement, or repair of
personal property performed by the registered or legal
owner, or by a mobile /manufactured home retail dealer or
manufacturer licensed under chapter 46.70 RCW who shall
warranty service and repairs under chapter 46.70 RCW;
7. Any construction, alteration, improvement, or repair
carried on within the limits and boundaries of any site or
reservation under the legal jurisdiction of the federal
government;
8. Any person who only furnished materials, supplies, or
equipment without fabricating them into, or consuming
them in the performance of, the work of the contractor;
9. Any work or operation on one undertaking or project by
one or more contracts, the aggregate contract price of
which for labor and materials and all other items is less
than five hundred dollars, such work or operations being
considered as of a casual, minor, or inconsequential nature.
The exemption prescribed in this subsection does not apply
in any instance wherein the work or construction is only a
part of a larger or major operation, whether undertaken by
the same or a different contractor, or in which a division of
the operation is made into contracts of amounts less than
five hundred dollars for the purpose of evasion of this
chapter or otherwise. The exemption prescribed in this
subsection does not apply to a person who advertises or
puts out any sign or card or other device which might
indicate to the public that he or she is a contractor, or that
he or she is qualified to engage in the business of
contractor;
lo. Any construction or operation incidental to the
construction and repair of irrigation and drainage ditches
of regularly constituted irrigation districts or reclamation
districts; or to farming, dairying, agriculture, viticulture,
horticulture, or stock or poultry raising; or to clearing or
other work upon land in rural districts for fire prevention
purposes; except when any of the above work is performed
by a registered contractor;
11. An owner* who contracts for a project with a registered
contractor, except that this exemption shall not deprive the
owner of the protections of this chapter against registered
and unregistered contractors. The exemption prescribed in
this subsection does not apply to a person who performs
the activities of a contractor for the purpose of leasing or
selling improved property he or she has owned for less than
twelve months;
12. Any person working on his or her own property,
whether occupied by him or her or not, and any person
working on his or her personal residence, whether owned
by him or her or not but this exemption shall not apply to
any person who performs the activities of a contractor on
his or her own property for the purpose of selling,
demolishing, or leasing the property;
13. An owner* who performs maintenance, repair, and
alteration work in or upon his or her own properties, or
who uses his or her own employees to do such work;
14. A licensed architect or civil or professional engineer
acting solely in his or her professional capacity, an
electrician certified under the laws of the state of
Washington, or a plumber certified under the laws of the
state of Washington or licensed by a political subdivision of
the state of Washington while operating within the
boundaries of such political subdivision. The exemption
provided in this subsection is applicable only when the
person certified is operating within the scope of his or her
certification;
15. Any person who engages in the activities herein
regulated as an employee of a registered contractor with
wages as his or her sole compensation or as an employee
with wages as his or her sole compensation;
16. Contractors on highway projects who have been
prequalified as required by RCW 47.28.070, with the
department of transportation to perform highway
construction, reconstruction, or maintenance work;
17. A mobile /manufactured home dealer or manufacturer
who subcontracts the installation, set -up, or repair work to
actively registered contractors. This exemption only applies
to the installation, set -up, or repair of the
mobile /manufactured homes that were manufactured or
sold by the mobile /manufactured home dealer or
manufacturer;
18. An entity who holds a valid electrical contractor's
license under chapter 19.28 RCW that employs a certified
journeyman electrician, a' certified residential specialty
electrician, or an electrical'tralnee meeting the
requirements of chapter 19:28 RCW to;perform plumbing
work that is incidentally,"directly, and immediately
appropriate to the like -in -kind replacement of a household
appliance or other small household utilization equipment
that requires limited electric power and limited waste
and /or water connections; An electrical trainee must be
supervised by a certified electrician while performing
plumbing work.
• Per Washington State Department of Labor and Industries, lessee has been
interpreted to be equivalent to owner for the purpose of these exemptions.