The URL can be used to link to this page

Home My WebLink AboutPermit D09-200 - SUBWAY - TENANT IMPROVEMENTSUBWAY 7100 FUN CENTER WAY SUITE 105 D09 -200 City of Tukwila Department of Community Development 6300 Southcenter Boulevard, Suite #100 Tukwila, Washington 98188 Phone: 206-431-3670 Fax: 206 - 431 -3665 Web site: http: //www. ci. tukwila. wa. us CERTIFICATE OF OCCUPANCY This certificate is issued pursuant to the requirements of Section 110.2 of the 2006 edition of the International Building Code. At the time of issuance, this structure or portion thereof has been inspected for compliance with the requirements of this code for the occupancy and division of occupancy and the use for which the proposed occupancy is classified. Building Permit No.: D09 -200 Occupant/Tenant: SUBWAY Building Address: 7100 FUN CENTER WY, SUITE NO. 105 Parcel No.: 2423049092 Property Owner: H2 OFFICE LLC 7100 FUN CENTER WAY STE 100 , TUKWILA WA 98188 Use: RESTAURANT Occupancy Group/Division: A2 Type of Construction: VB Automatic Sprinkler System: Provided: Y Required: Y Design Occupant Load: 32 BUILDING •FFICIAL DATE THIS CERTIFICATE TO BE CONSPICUOUSLY POSTED ON THE PREMISES Parcel No.: 2423049092 Address: 7100 FUN CENTER WY TUKW Suite No: Tenant: Name: SUBWAY Address: 7100 FUN CENTER WY, STE 150 , TUKWILA WA Owner: Name: H2 OFFICE LLC Address: 7100 FUN CENTER WAY STE 100 , TUKWILA WA 98188 Phone: Contact Person: Name: RAHIM KARMALI Address: 15019 SE 44 ST , BELLEVUE WA 98006 Phone: 206 779 -0909 Contractor: Name: SIMON INTERIOR LLC Address: 1103 126 ST SE , EVERETT' WA 98208 Phone: 425 - 220 -2273 Contractor License No: SIMONIL925DF Cityllif Tukwila • doc: IBC -10/06 Department of Community Development 6300 Southcenter Boulevard, Suite #100 Tukwila, Washington 98188 Phone: 206 - 431 -3670 Fax: 206-431-3665 Web site: http://www.citukwila.wa.us DEVELOPMENT PERMIT DESCRIPTION OF WORK: TENANT IMPROVEMENT: BUILD OUT RESTAURANT INCLUDING (2) DEMISING WALLS, CONSTRUCTION OF BATHROOMS, AND INSTALLATION OF OTHER FIXTURES (MEP'S ARE SEPARATE PERMITS). THERE ARE NO PW ACTIVITIES ASSOCIATED WITH THIS T.I., HOWEVER PW FINAL INSPECTION IS REQUIRED TO ASSURE THAT A GREASE TRAP AND A SEWER MONITORING PORT WAS INSTALLED. AN OUTSIDE GREASE INTERCEPTOR IS NOT REQUIRED AT THIS TIME. Value of Construction: $50,000.00 Fees Collected: $1,508.97 Type of Fire Protection: SPRINKLERS International Building Code Edition: 2006 Type of Construction: VB Occupancy per IBC: 0004 * *continued on next page ** Permit Number: D09 -200 Issue Date: 10/12/2009 Permit Expires On: 04/10/2010 Expiration Date: 03/06/2010 009 -200 Printed: 10 -12 -2009 Public Works Activities: Channelization / Striping: N Curb Cut / Access / Sidewalk / CSS: N Water Meter: Permit Center Authorized Signature: doc: IBC -10 /06 City dftukwila • Department of Community Development 6300 Southcenter Boulevard, Suite #100 Tukwila, Washington 98188 Phone: 206 - 431 -3670 Fax: 206 - 431 -3665 Web site:. http: / /www.ci.tukwila.wa.us Fire Loop Hydrant: N Number: 0 Size (Inches): 0 Flood Control Zone: Hauling: N Start Time: End Time: Land Altering: Volumes: Cut 0 c.y. Fill 0 c.y. Landscape Irrigation: Moving Oversize Load: Start Time: End Time: Sanitary Side Sewer: Sewer Main Extension: Private: Public: Storm Drainage: Street Use: Profit: N Non - Profit: N Water Main Extension: Private: Public: N Permit Number: D09 -200 Issue Date: 10/12/2009 Permit Expires On: 04/10/2010 Date: I hereby certify that I have read and examined this permit and know the same to be true and correct. All provisions of law and ordinances governing this work will be complied with, whether specified herein or not. The granting of this permit does not presume to give authority to violate or cancel the provisions of any other state or local laws regulating construction or the performance of work. I am authorized to sign and obtain this development permit. rr Signature: Date: l b11 y'7.1-u °` Print Name: i--k\A \*1\i\ \ ti iV , This permit shall become null and void if the work is not commenced within 180 days from the date of issuance, or if the work is suspended or abandoned for a period of 180 days from the last inspection. D09 -200 Printed: 10 -12 -2009 Parcel No.: 2423049092 Address: 7100 FUN CENTER WY TUKW Suite No: Tenant: SUBWAY 1: ** *BUILDING DEPARTMENT CONDITIONS * ** • • City of Tukwila Department of Community Development 6300 Southcenter Boulevard, Suite #100 Tukwila, Washington 98188 Phone: 206 - 431 -3670 Fax: 206 -431 -3665 Web site: http: / /www.ci.tukwila.wa.us PERMIT CONDITIONS Permit Number: D09 -200 Status: ISSUED Applied Date: 09/24/2009 Issue Date: 10/12/2009 2: No changes shall be made to the approved plans unless approved by the design professional in responsible charge and the Building Official. 3: All mechanical work shall be inspected and approved under a separate permit issued by the City of Tukwila Permit Center (206/431- 3670). 4: All permits, inspection records, and approved plans shall be at the job site and available to the inspectors prior to start of any construction. These documents shall be maintained and made available until final inspection approval is granted. 5: New suspended ceiling grid and light fixture installations shall meet the non - building structures seismic design requirements of ASCE 7. 6: Partition walls that are tied to the ceiling and all partitions greater than 6 feet in height shall be laterally braced to the building structure. 7: All construction shall be done in conformance with the approved plans and the requirements of the International Building Code or International Residential Code, International Mechanical Code, Washington State Energy Code. 8: All food preparation establishments must have Seattle /King County Department of Public Health sign -off prior to opening or doing any food processing. Arrangements for final Health Department inspection shall be made by calling Seattle/King County Department of Public Health, (206/296- 4928), at least three working days prior to desired inspection date. On work requiring Health Department approval, it is the contractor's responsibility to have a set of plans approved by the agency on the job site. 9: There shall be no occupancy of a building until final inspection has been completed and approved by Tukwila building inspector. No exception. 10: Manufacturers installation instructions shall be available on the job site at the time of inspection. 11: Ventilation is required for all new rooms and spaces of new or existing buildings and shall be in conformance with the International Building Code and the Washington State Ventilation and Indoor Air Quality Code. 12: Water heaters shall be anchored or strapped to resist horizontal displacement due to earthquake motion. Strapping shall be at points within the upper one -third and lower one -third of the water heater's vertical dimension. A minimum distance of 4- inches shall be maintained above the controls with the strapping. 13: All plumbing and gas piping work shall be inspected and approved under a separate permit issued by the Cityof Tukwila Permit Center. 14: All electrical work shall be inspected and approved under a separate permit issued by the City of Tukwila Building Department (206- 431 - 3670). 15: VALIDITY OF PERMIT: The issuance or granting of a permit shall not be construed to be a permit for, or an approval of, doc: Cond -10/06 D09 -200 Printed: 10 -12 -2009 17: ** *FIRE DEPARTMENT CONDITIONS * ** • City of Tukwila Department of Community Development 6300 Southcenter Boulevard, Suite #100 Tukwila, Washington 98188 Phone: 206 - 431 -3670 Fax: 206- 431 -3665 Web site: http: / /www.ci.tukwila.wa.us any violation of any of the provisions of the building code or of any other ordinances of the City of Tukwila. Permits presuming to give authority to violate or cancel the provisions of the code or other ordinances of the City of Tukwila shall not be valid. The issuance of a permit based on construction documents and other data shall not prevent the Building Official from requiring the correction of errors in the construction documents and other data. 16: A Certificate of Occupancy shall be issued for this building upon final inspection approval by Tukwila building inspector. 18: The attached set of building plans have been reviewed by the Fire Prevention Bureau and are acceptable with the following concerns: 19: The total number of fire extinguishers required for an ordinary hazard occupancy with Class A fire hazards is calculated at one extinguisher for each 1,500 sq. ft. of area. The extinguisher(s) should be of the "All Purpose" (2A, 20B:C) dry chemical type. Travel distance to any fire extinguisher must be 75' or less. (IFC 906.3) (NFPA 10, 3 -2.1) 20: Portable fire extinguishers, not housed in cabinets, shall be installed on the hangers or brackets supplied. Hangers or brackets shall be securely anchored to the mounting surface in accordance with the manufacturer's installation instructions. Portable fire extinguishers having a gross weight not exceeding 40 pounds (18 kg) shall be installed so that its top is not more than 5 feet (1524 mm) above the floor. Hand -held portable fire extinguishers having a gross weight exceeding 40 pounds (18 kg) shall be installed so that its top is not more than 3.5 feet (1067 mm) above the floor. The clearance between the floor and the bottom of the installed hand -held extinguishers shall not be less than 4 inches (102 mm). (IFC 906.7 and IFC 906.9) 21: Fire extinguishers shall not be obstructed or obscured from view. In rooms or areas in which visual obstruction cannot be completely avoided, means shall be provided to indicate the locations of the extinguishers. (IFC 906.6) 22: Extinguishers shall be located in conspicuous locations where they will be readily accessible and immediately available for use. These locations shall be along normal paths of travel, unless the fire code official determines that the hazard posed indicates the need for placement away from normal paths of travel. (IFC 906.5) 23: Fire extinguishers require monthly and yearly inspections. They must have a tag or label securely attached that indicates the month and year that the inspection was performed and shall identify the company or person performing the service. Every six years stored pressure extinguishers shall be emptied and subjected to the applicable recharge procedures. If the required monthly and yearly inspections of the fire extinguisher(s) are not accomplished or the inspection tag is not completed, a reputable fire extinguisher service company will be required to conduct these required surveys. (NFPA 10, 4 -3, 4 -4) 24: Egress doors shall be readily openable from the egress side without the use of a key or special knowledge or effort. (IFC 1008.1.8.3 subsection 2.2) 25: Dead bolts are not allowed on auxiliary exit doors unless the dead bolt is automatically retracted when the door handle is engaged from inside the tenant space. (IFC Chapter 10) 26: Door handles, pulls, latches, locks and other operating devices on doors required to be accessible by Chapter 11 of the International Building Code shall not require tight grasping, tight pinching or twisting of the wrist to operate. (IFC 1008.1.8.1) 27: Exit hardware and marking shall meet the requirements of the International Fire Code. (IFC Chapter 10) 28: Aisles leading to required exits shall be provided from all portions of the building and the required width of the aisles shall be unobstructed. (IFC 1013.4) 29: Maintain sprinkler coverage per N.F.P.A. 13. Addition/relocation of walls, closets or partitions may require relocating doc: Cond -10/06 D09 -200 Printed: 10 -12 -2009 and/or adding sprinlder heads. (IFC 901.4) • City of Tukwila Department of Community Development 6300 Southcenter Boulevard, Suite #100 Tukwila, Washington 98188 Phone: 206 - 431 -3670 Fax: 206 - 431 -3665 Web site: http: / /www.ci.tukwila.wa.us 30: Sprinklers shall be installed under fixed obstructions over 4 feet (1.2 m) wide such as ducts, decks, open grate flooring, cutting tables, shelves and overhead doors. (NFPA 13- 8.6.5.3.3) 31: All new sprinlder systems and all modifications to existing sprinlder systems shall have fire department review and approval of drawings prior to installation or modification. New sprinlder systems and all modifications to sprinkler systems involving more than 50 heads shall have the written approval of the W.S.R.B., Factory Mutual, Industrial Risk Insurers Kemper or any other representative designated and /or recognized by the City of Tukwila, prior to submittal to the Tukwila Fire Prevention Bureau. No sprinkler work shall commence without approved drawings. (City Ordinance #2050) 32: Maintain fire alarm system audible /visual notification. Addition/relocation of walls or partitions may require relocation and/or addition of audible /visual notification devices. (City Ordinance #2051) 33: All new fire alarm systems or modifications to existing systems shall have the written approval of The Tukwila Fire Prevention Bureau. No work shall commence until a fire department permit has been obtained. (City Ordinance #2051) (IFC 104.2) 34: An electrical permit from the City of Tukwila Building Department Permit Center (206- 431 -3670) is required for this project. 35: The maximum flame spread class of finish materials used on interior walls and ceilings shall not exceed that set forth in Table No. 803.5 of the International Building Code. 36: Contact The Tukwila Fire Prevention Bureau to witness all required inspections and tests. (City Ordinances #2050 and #2051) 37: Any overlooked hazardous condition and/or violation of the adopted Fire or Building Codes does not imply approval of such condition or violation. 38: These plans were reviewed by Inspector 511. If you have any questions, please call Tukwila Fire Prevention Bureau at (206)575 -4407. 39: * * * ** PUBLIC WORKS * * * ** Food preparation shall be limited to cleaning and cutting of vegetables and assembly of sandwiches. Under a Plumbing Permit the applicant shall install a three (3) compartment sink with grease trap under the sink. The grease trap shall be maintained by an outside company on monthly basis (provide Public Works with trip tickets from hauler). Subway Restaurant shall have the grease trap sampled by an outside lab and provide Tukwila Public Works with monthly test results performed by a certified testing laboratory. Test results shall be mailed monthly to Mr. Mike Cusick, P.E., PW Senior Sewer Engineer, 6300 Southcenter Blvd, Ste #100, Tukwila ,WA 98188 -2544, phone (204)431 -2441. If the test results fail an outside three compartment double baffle grease interceptor per City of Tukwila Detail SS -14 shall be installed. 40: Subway Restaurant shall notify Public Works at (206) 433 -0179 of any restaurant menu change and/or expansion, and of any date in the future the plan to move out and/or seize the restaurant operation at this location. doc: Cond -10/06 * *continued on next page ** D09 -200 Printed: 10 -12 -2009 • • City of Tukwila Department of Community Development 6300 Southcenter Boulevard, Suite #100 Tukwila, Washington 98188 Phone: 206 -431 -3670 Fax: 206 - 431 -3665 Web site: http: / /www.ci.tukwila.wa.us I hereby certify that I have read these conditions and will comply with them as outlined. All provisions of law and this work will be complied with, whether specified herein or not. The granting of this permit does not presume to give authority to violate or cancel the provision of any other work construction or the performance of work. Signature: Date: "b /1) -ua5 Print Name: 1- 1� \L4 doc: Cond -10 /06 D09 -200 ordinances governing or local laws regulating Printed: 10 -12 -2009 SITE LOCATION Site Address: Tenant Name: 1 ? A t Property Owners Name: \'\) 0 Fr: I L Mailing Address: 1 30 C F ° ' L E� eit wibi CONTACT PERSON - who do we contact when your permit is ready to be issued Name: [∎. 1 t &-Pt(Z--r L Mailing Address: i 5v1 1 C 4 r t'CL . Lu 01- E -Mail Address: .1 r� Q ,A t+ L 1 (k i 1 v‘l ✓J ( t. :''� GENERAL CONTRACTOR INFORMATION (Contractor Information for Mechanical (pg 4) for Plumbing and Gas Piping (pg 5)) Company Name: Mailing Address: City Contact Person: Day Telephone: E -Mail Address: Fax Number: Contractor Registration Number: Expiration Date: ARCHITECT OF RECORD - All plans must be wet stamped by Architect of Record Company Name: 11Rr+n LEiL Mailing Address: Contact Person: E -Mail Address: ENGINEER OF RECORD - All pla Company Name: Mailing Address: CITY OF TUKWILA Community Development Department Public Works Department Permit Center 6300 Southcenter Blvd., Suite 100 Tukwila, WA 98188 Intp://www.atukwila.wa.us Applications and plans must be complete in order to be accepted for plan review. Applications will not be accepted through the mail or by fax. * *Please Print ** ] 0J F v 1115 a��. otioLeAL Tc vc'(i. m be wet stamped by Engineer of Contact Person: E -Mail Address: H,\Applications\Porms- Applications On Line\2009 Applications \1 - 2009 - Permit Application.doc Revised: 1 -2009 bh Building Permit No. Mechanical Permit No. Plumbing /Gas Permit No. Public Works Permit No. Project No. (For office use only) DO ® c King Co Assessor's Tax No.: . /..M2- 7 V0 1 1 — (hr" 2- i 7E "1 Suite Number: 1 S `) Floor: 6- tt:+ `�rt'7 New Tenant: Yes El ..No Tri' kl L A City Day Telephone: •a fw 144 City Fax Number: g3 State Zip —° C i State Zip S 33 _ .4 -4-7 State State Zip 1\11-(..' ITC k r� s�1"t��r��S►� �� 1S0 City t State Zip Day Telephone: T a-5 ' u — 11 T Fax City Day Telephone: Fax Number: Page 1 of 6 Zip BUILDING PERMIT INFORMATION — 206 - 431 -3670 Valuation of Project (contractor's bid price): $ j 0, 00 Existing Building Valuation: $ r! Scope of Work (please provide detailed information): T .- C - 1 411t 7 f'1 V a 0 `i 6 IS To V gj T s vJ( ` A fit /A l r 11 — 1 r C L UDCT Q6-i($)6 \d tit, c:orSfL� C CV1 VYt -o. g it/ TJit LA7�,. vi--e t7✓n,e NLc Will there be new rack storage? ❑ Yes l s Floor 2 Floo 3' Floor Floors thru Basement Accessory Structure* Attached Garage Detached Garage Attached Carport Detached Carport Deck Uncovered Deck Existing Interior Remodel ioo H:Wpplications\Forms- Applications On Line\2009 Applications \1 -2009 - Permit Application.doc Revised: 1 -2009 bh rt .,. No If yes, a separate permit and plan submittal will be required. Provide All Building Areas in Square Footage Below Addition to Existing Structure New Type of Construction per IBC VI; Type of Occupancy per IBC PLANNING DIVISION: Single family building footprint (area of the foundation of all structures, plus any decks over 18 inches and overhangs greater than 18 inches) *For an Accessory dwelling, provide the following: Lot Area (sq ft): Floor area of principal dwelling: Floor area of accessory dwelling: *Provide documentation that shows that the principal owner lives in one of the dwellings as his or her primary residence. Number of Parking Stalls Provided: Standard: Compact: Handicap: Will there be a change in use? ❑ Yes ❑ No If "yes ", explain: FIRE PROTECTION /HAZARDOUS MATERIALS: g Sprinklers ❑ Automatic Fire Alarm ❑ None ❑ Other (specify) Will there be storage or use of flammable, combustible or hazardous materials in the building? ❑ Yes No If "yes', attach list of materials and storage locations on a separate 8 -1/2 "x 11" paper including quantities and Material Safety ata Sheets. SEPTIC SYSTEM ❑ On -site Septic System — For on -site septic system, provide 2 copies of a current septic design approved by King County Health Department. Page 2 of 6 PERMIT APPLICATION NOTES — Applicable to all permits in this application Value of Construction — In all cases, a value of construction amount should be entered by the applicant. This figure will be reviewed and is subject to possible revision by the Permit Center to comply with current fee schedules. Expiration of Plan Review — Applications for which no permit is issued within 180 days following the date of application shall expire by limitation. Building and Mechanical Permit The Building Official may grant one or more extensions of time for additional periods not exceeding 90 days each. The extension shall be requested in writing and justifiable cause demonstrated. Section 105.3.2 International Building Code (current edition). Plumbing Permit The Building Official may grant one extension of time for an additional period not exceeding 180 days. The extension shall be requested in writing and justifiable cause demonstrated. Section 103.4.3 Uniform Plumbing Code (current edition). I HEREBY CERTIFY THAT I HAVE READ AND EXAMINED THIS APPLICATION AND KNOW THE SAME TO BE TRUE UNDER PENALTY OF PERJURY BY THE LAWS OF THE STATE OF WASHINGTON, AND I AM AUTHORIZED TO APPLY FOR THIS PERMIT. BUILDING OWNER O UTIVRIZED AGENT: Signature: \VV Print Name: - *'4 Mailing Address: 1501°1 se �T H: \ApplicationsWorms- Applications On Line\2009 Applications \I -2009 - Permit Application.doc Revised: 1 -2009 bh Date: Day Telephone: DIA - 7 I -- 01 City State Zip Page 6 of 6 Fixture Type: Qty Fixture Type: 4ty Fixture Type: ' Qty Fixture Type: Qty Bathtub or combination bath/shower Bidet Clothes washer, domestic Dental unit, cuspidor Dishwasher, domestic, with independent drain Drinking fountain or water cooler (per he.) Lavatory Food -waste grinder, commercial Wash fountain Floor Drain Receptor, indirect waste Shower, single head trap Sinks Urinals ater Closet Building sewer and each trailer park sewer Rain water system — per drain (inside building) Water heat and /or vent Ind rial waste treatment interc- -tor, including trap and ven -xcept for kitchen type greas• - nterceptors Each grease trap (connected to not more than 4 fixtures - <750 gallon capacity) Grease interceptor for commercial kitchen ( >750 gallon capacity) Rep or alteration of wa r piping and/or water tr . tment equipment Repair or al , ation of drainage or ve piping Medical gas piping system serving 1 -5 inlets /outlets for a specific gas Each additional medical gas inlets /outlets greater than 5 : ackflow protective device other than atmospheric -type vacuum breakers 2 inch (51 mm) diameter or smaller Backflow protective -vice other than atmospheric • pe vacuum breakers over 2 inch (51 mm) diameter Each lawn sprinkler system on any one meter including backflow protection devices Atmospheric -type vacuum breakers not included in lawn sprinkler backflow protections (1 -5) Atmospheric -type vacuum breakers not included in lawn sprinkler backflow protections over 5 Gas piping outlets Contact Person: E - Mail Address: Contractor Reg' tration Number: PLUMBING AND GAS PIPING PERMIT INFORMATION - 206- 431 -3670 PLUMBING AND GAS PIPING CONTRACTOR INFORMATION Company Name: Mailing Address: Valuation of Project ntractor's bid price): $ Scope of Work (please p vide detailed information): Building Use (per Int'l Building Cod- Occupancy (per Int'l Building Code): Utility Purveyor: Water: Indicate type of plumbing fixtures and /or gas pipin outlets b. g installed and the quantity below: H:\Applications\Porms- Applications On- Line\2009 Applications \1-2009 Permit Application.doc Revised: 1 -2009 bh City State Zip Day Telephone: Fax Number: Expiration Date: Sewer: Page 5 of 6 Parcel No.: 2423049092 Address: 7100 FUN CENTER WY TUKW Suite No: Applicant: SUBWAY Receipt No.: R09 -01584 Initials: User ID: WER 1655 Payee: RAHIM KARMALI TRANSACTION LIST: Type Method Descriptio Amount Payment Credit Crd VISA - Authorization No. 01585C ACCOUNT ITEM LIST: Description BUILDING - NONRES STATE BUILDING SURCHARGE i City of Tukwila Department of Community Development 6300 Southcenter Boulevard, Suite #100 Tukwila, Washington 98188 Phone: 206-431-3670 Fax: 206 - 431 -3665 Web site: http: / /www.ci.tukwila.wa.us RECEIPT 916.30 Total: $916.30 Permit Number: D09 -200 Status: APPROVED Applied Date: 09/24/2009 Issue Date: Payment Amount: $916.30 Account Code Current Pmts 000/322.100 911.80 640.237.114 4.50 Payment Date: 10/12/2009 03:22 PM Balance: $0.00 PAYMENT RECEIVED doc: Receiot -06 Printed: 10 -12 -2009 RECEIPT NO: R09 -01494 Ci, of Tukwila. Department of Community Development 6300 Southcenter Boulevard, Suite #100 Tukwila, Washington 98188 Phone: 206 - 431 -3670 Fax: 206 - 431 -3665 Web site: http: //www. ci. tukwila. wa. us Payment Date: 09/24/2009 User ID: 1165 Total Payment: 653.33 Initials: JEM Payee: RAHIM KARMALI SET ID: S000001301 SET NAME: Tmp set/Initialized Activities SET TRANSACTIONS: Set Member D09 -200 M09 -120 TOTAL: ACCOUNT ITEM LIST: Description PLAN CHECK - NONRES Amount 592.67 60.66 592.67 SET RECEIPT TRANSACTION LIST: Type Method Description Amount Payment Credit C VISA - - - 653.33 TOTAL: 653.33 Account Code Current Pmts 000/345.830 TOTAL: 653.33 653.33 PAYMENT RECEIVED Pro t: Type of Inspection: Address: 7/00 /- 4/"f Date Called: Special Instructions: Date Wanted: y 9 m- Requester: Phone No: doh- 730 - A pproved per applicable codes. Corrections required prior to approval. COMMENTS: ? /� 7P/'�, . qC., `»*1r /fr' //I V / o f/ela , 1. - 7 4, AVM M oC,/, f : 4..rA•Pe e e o elAl,n9A/ n/ -1A 7_ �. --- \ CITY OF TUKWILA BUILDING DIVISION 6300 Southcenter Blvd., #100, Tukwila, WA 98188 nspector: $6 pa' Recei . N o.. CTION NO. INSPECTION RECORD Retain a copy with permit Date: 'Date: PERMIT NO. (206)431 -3670 REINSPECTION F E REQUIRE . Prior to inspection, fee must be d :t 6300 Southcenter lvd., Suit: 100. Call to schedule reinspection. ..w_ af..saa.• . y . -- -. ._... weer.aA _ _J___. _ - - ,COMMENTS: 7 Type of Inspection: ,c,.i S7,s,30.Pvfo /, n14 — � 9 ' � ,n.� C to Called: C/ 2 •. C Lir2 /A16 - Al / , n / o r Date Wan to � -o9 a _ � J 41,,, d ..14./...5)/Ali fr .1 -;,./5741/4 Phone No: Q7- 730 -55 hied le?' ( / 4 ( --- /L/C • a✓ _ r , 2/10447 iii — / 0 1 ; • ! N / . s Project:' s2/aw4 / Type of Inspection: ,c,.i Address: 7/00 c?//v ( Y AI7" e Cc) C to Called: C/ pecial Instructions: Date Wan to � -o9 a _ � J Requ Phone No: Q7- 730 -55 INSPECTION RECORD Retain a copy with permit INSPECTION NO. PERMIT NO. CITY OF TUKWILA BUILDING DIVISION -- 6300 Southcenter Blvd., #100, Tukwila, WA 98188 (206)431 -3670 Ap roved per applicable codes. Corrections required prior to approval.- 60.00 REINSP paid at 6300 Sou Receipt No.: TION hcent DS - I y REQUIRED. Prior to in'sp ction, fee must be r Blvd., Suite 100. Call to Sch�dule reinspection. Pate: t Probe ? /� a4 .y Type of Inspection: / //1/ Address: 7/0o /.tJ C' Ail Q GL Date Called: Special Instructions: Date Wanted: - //- /2- o 5 p.m. Requester: Phone No: ao 6- 734 - S-' B 7 .lam'- -200 INSPECTION RECORD Retain a copy with permit INSPECTION NO. PERMIT NO. CITY OF TUKWILA BUILDING DIVISION 6300 Southcenter Blvd., #100, Tukwila, WA 98188 (206)431 -3670 pproved per applicable codes. El Corrections required prior to approval. COMMENTS: .00 REINSPECTION FEE EQUIRED. Pri f to inspection, fe must be aid at 6300 Southcenter Bt d., Suite 100. all to schedule reinspection. Receipt No.: Date: Project: 5 , b uiocl Sprinklers: Type of Inspection: Address: 1 /00 Suite #: „, 7er , 17 ,. '' Contact Person: Special Instructions: ..Pre-Fire: / Permits: Phone No.: Needs Shift Inspectia: Sprinklers: Fire Alai Hood & Duct: . Monitor: ..Pre-Fire: / Permits: : ` Occupancy Type: INSPECTION NUMBER . Approved per applicable codes. PP Word /Inspection Record Form.Doc INSPECTION RECORD Retain a copy with permit CITY OF TUKWILA FIRE DEPARTMENT 1/13/06 inofs- 2 ?O PERMIT NUMBERS 444 Andover Park East, Tukwila, Wa. 98188 206- 575 -4407 Corrections required prior to approval. $80.00 REINSPECTION FEE REQUIRED. You will receive an invoice from the City of Tukwila Finance Department. Call to schedule a reinspection. T.F.D. Form F.P. 113 COMMENTS: 414-t a 47/ J i Ini ector: `T Date: )21 Hrs.: COMMENTS: ,Sprinklers: Type of Inspection: Hvm 6 /F • tf Contact Person: Pre -Fire: Special Instructions: Permits: Phone No.: . 6 2 N<<at a s I.9., � 1 1 . , 1 L O 4 h rii I d. C ) '4> :a i Project: 5 ,4 b w4, y ,Sprinklers: Type of Inspection: Hvm 6 /F Address: 2JC'O F Act ,,i4, t . Suite #: tf Contact Person: Pre -Fire: Special Instructions: Permits: Phone No.: . Needs .Shift Inspection: ,Sprinklers: Fire Alarm: Hood & Duct: / Monitor: Pre -Fire: Permits: Occupancy Type: . INSPECTION NUMBER INSPECTION RECORD Retain a copy with permit CITY OF TUKWILA FIRE DEPARTMENT 444 Andover Park East, Tukwila, Wa. 98188 206- 575 -4407 I Inspector: 5 w y 1 7 Date: 1J 016.7 . / Hrs.: Approved per applicable codes. $80.00 REINSPECTION kt'REQUIRED. You will receive an invoice from i y of Tukwila Finance Department. Call to schedule a reinspection. Word/Inspection Record Form.Doc 1/13/0B': .:. 007- - 4oa p1rig- 2_0 - PERMIT NUMBERS I J Corrections required prior to approval. T.F.D. Form F.P. 113 Project: 5 b , Sprinklers: Type of Inspection: Hood & Duct: r Address: 7) kv L� Suite #: c c.4 ./,, Contact Person: t 14s4 Special Instructions: Phone No.: 2c6• 232- - tf.- a Needs Shift Inspection: Sprinklers: Fire Alarm: Hood & Duct: Monitor: Pre -Are: Permits: Occupancy Type: . INSPECTION NUMBER INSPECTION RECORD Retain a copy with permit CITY OF TUKWILA FIRE DEPARTMENT �. ZO c. Gi'/ . - . _.L7 - 7 PERMIT NUMBERS 444 Andover Park East, Tukwila, Wa. 98188 206 - 575 -4407 2 r Approved per applicable codes. n Corrections required prior to approval. COMMENTS: 'r7 / Co Sep,, i44,,- Inspector: Ski Date: // 3p / I Hrs.: • $80.00 REINSPECTION FEE REQUIRED. You will receive an invoice from e City of Tukwila Finance Department. Call to schedule a reinspection. Word /Inspection Record Form.Doc 1/13/06 T.F.D. Form F.P. 113 Project: i la b,,✓0 al Sprinklers: Type of Inspection: = OM/Atli Address: 7/00 r hce. Suite #: - ai. k.' A Contact Person: de /e Special Instructions: r f . Phone No.: I/ z..- - - 7.5 4 ,-- 7G L 5 Needs Shift Inspection: Sprinklers: Fire Alarm: - -. Hood & Duct: Monitor: `" Pre -Fire: Permits: Occupancy Type: INSPECTION NUMBER INSPECTION RECORD Retain a copy with permit CITY OF TUKWILA FIRE DEPARTMENT 009 - zoo ©9 _ PERMIT NUMBERS 444 Andover Park East, Tukwila, Wa. 98188 - 206- 575 -4407 [' Approved per applicable codes. Corrections required prior to approval. COMMENTS: •4.1 0, 144 1 Ye 5 ,,(7) 4c,„ 6.1 Jd s ;/I J omp p pre Aliz4 44. Z Inspector: 6-G/ Date: / / 3 v ), q'• Hrs.: $80.00'REINSPECTION FEE REQUIRED. You will receive an invoice from he City of Tukwila Finan q Department. Call to schedule a reinspection. Word /Inspection Record Form.Doc 1/13/06 T.F.D. Form F.P. 113 7 r � , r 2006 Washington State Nonresidential Energy Code Compliance Form Interior Lighting Summary 2008 Veshington State Nonresidential Energy Code Compliance Forms LTG -INT Project Info 6urrE, 15 Notes: Fro CODE COMPLIANCE APPROVED OCT 0 9 21109 A. u/2 City of Tukwila BUILDING DIVISION Protg URL�.1D�/ f o h o , , FUN G - T t , ) A ( ( t Date A„ 0 0 1 `� 7 I ', WA of Q-,1 C; For Building Department Use Applicant Name: Ci.up t,eg s—aVlytz Applicant Address: t7/5 z2 Applicant Phone: 3RU f G /06_ f $/tpfgfi�/ AA. qaC -7t�. 4 f - Z 5 - - ?� Project Description ❑ New Building ❑ Addition ❑ Plans Included Refer to WSEC Section 1513 for controls and commissioning requirements. Alteration (Compliance Option 1 0 Prescriptive Q Lighting Power Allowance 0 Systems Analysis (See Qualification Checklist (over). Indicate Prescriptive & LPA spaces clearly on plans.) i Alteration Exceptions ❑ No changes are being made to the lighting (check appropriate box - sec. 1132.3) ❑ Less than 60% of the fixtures new, installed wattage not increased, & space use not changed. Maximum Allowed Lighting Wattage 1 Location (floor /room no.) i Occupancy Description �CKjl - /24-7-A(6 m Table 15 -1 (over) - document all exceptions on form LTG -LPA Allowed Watts per ft /1 Area in ft 6100 Total Allowed Watts Allowed x Area L 4- 3. 0 Proposed Lighting Wattage Location (floor/room no.) Fixture Description ,ti r" ,- , t C T-rf • } �1L C Total Proposed Watts may not exceed Total Allowed Watts f FILE COPY Revised July 2007 1. For proposed Fixture Description, indicate fixture type, lamp type (e.g. T -8), number of lamps in the fixture, and ballast type (if included). For track lighting, list the length of the track (in feet) in addition to the fixture, lamp, and ballast information. 2. For proposed Watts/Fixture, use manufacturer's listed maximum input wattage of the fixture (not simply the lamp wattage) and other criteria as specified in Section 1530. For hard -wired ballasts only, the default table in the NREC Technical Reference Manual may also be used. For track lighting, list the greater of actual luminaire wattage or length of track multiplied by 50, or as applicable, the wattage of current limiting devices or of the transformer. RE V pORxempt lighting, note section and exception number, and leave Watts/Fixture blank. P01 -X00 Number of Fixtures Watts/ Watts Fixture ` Proposed 310 �i I G 0-`0 It ', o ,L- 9.-') 1 AMEN 1 RIMPIPIIIII >r Interior Total Proposed Watts D s 2006 Washington State Nonresidential Energy Code Compliance Form Interior Lighting Summary 2008 Veshington State Nonresidential Energy Code Compliance Forms LTG -INT Project Info 6urrE, 15 Notes: Fro CODE COMPLIANCE APPROVED OCT 0 9 21109 A. u/2 City of Tukwila BUILDING DIVISION Protg URL�.1D�/ f o h o , , FUN G - T t , ) A ( ( t Date A„ 0 0 1 `� 7 I ', WA of Q-,1 C; For Building Department Use Applicant Name: Ci.up t,eg s—aVlytz Applicant Address: t7/5 z2 Applicant Phone: 3RU f G /06_ f $/tpfgfi�/ AA. qaC -7t�. 4 f - Z 5 - - ?� Project Description ❑ New Building ❑ Addition ❑ Plans Included Refer to WSEC Section 1513 for controls and commissioning requirements. Alteration (Compliance Option 1 0 Prescriptive Q Lighting Power Allowance 0 Systems Analysis (See Qualification Checklist (over). Indicate Prescriptive & LPA spaces clearly on plans.) i Alteration Exceptions ❑ No changes are being made to the lighting (check appropriate box - sec. 1132.3) ❑ Less than 60% of the fixtures new, installed wattage not increased, & space use not changed. Maximum Allowed Lighting Wattage 1 Location (floor /room no.) i Occupancy Description �CKjl - /24-7-A(6 m Table 15 -1 (over) - document all exceptions on form LTG -LPA Allowed Watts per ft /1 Area in ft 6100 Total Allowed Watts Allowed x Area L 4- 3. 0 Proposed Lighting Wattage Location (floor/room no.) Fixture Description ,ti r" ,- , t C T-rf • } �1L C Total Proposed Watts may not exceed Total Allowed Watts f FILE COPY Revised July 2007 1. For proposed Fixture Description, indicate fixture type, lamp type (e.g. T -8), number of lamps in the fixture, and ballast type (if included). For track lighting, list the length of the track (in feet) in addition to the fixture, lamp, and ballast information. 2. For proposed Watts/Fixture, use manufacturer's listed maximum input wattage of the fixture (not simply the lamp wattage) and other criteria as specified in Section 1530. For hard -wired ballasts only, the default table in the NREC Technical Reference Manual may also be used. For track lighting, list the greater of actual luminaire wattage or length of track multiplied by 50, or as applicable, the wattage of current limiting devices or of the transformer. RE V pORxempt lighting, note section and exception number, and leave Watts/Fixture blank. P01 -X00 2006 Washington State Nonresidential Energy Code Compliance Form Interior Lighting Summary (back) 2006 Washington State Nonresidential Energy Code Compliance Forms LTG -INT Revised July 2007 Prescriptive Spaces Qualification Checklist Note: If occupancy type is "Other" and fixture answer is checked, the number of fixtures it the space is not limited by Code. Clearly indicate these spaces on plans. If not qualified, do LPA Calculations. Occupancy: 0 Warehouses, storage areas or aircraft storage hangers 0 Other i Lighting Fixtures: (Section 1521) ❑ Check if 95% or more of fixtures comply with 1,2 or 3 and rest are ballasted. 1. Fluorescent fixtures which are non - lensed with a) 1 or 2 two lamps, b) reflector or louvers, c) 5-60 watt T -1, T -2, T-4, T -5, T-8 lamps, and d) hard -wired elec- tronic dimming ballasts. Screw -in compact fluorescent fixtures do not qualify. 2. Metal Halide with a) reflector b) ceramic MH lamps <= 150w c) electronic ballasts 3. LED lights. Automotive facility Convention center Courthouse Cafeterias, fast food establishments', restaurants/bars Dormitory Exercise center Gymnasia", assembly spaces Health care clinic Hospital, nursing homes, and other Group 1 -1 and 1 -2 Occupancies Hotel/motel Hotel banquet/conference /exhibition hall Laboratory spaces (all spaces not classified laboratory" shall meet office and other appropriate categories) Laundries Libraries' Manufacturing facility Museum LPA (W /sf) 0.9 1.2 1.3 1.0 1.0 1.0 1.2 1.0 2.0 1.8 12 1.3 1.3 1.1 Use' Office buildings, office /administrative areas in facilities of other use types (including but not limited to schools hospitals, institutions, museums, banks, churches) Penitentiary and other Group 1 -3 Occupancies Police and fire stations Post office Retail'', retail banking, mall concourses, wholesale stores (pallet rack shelving) School buildings (Group E Occupancy only), school classrooms, day care centers Theater, motion picture Theater, performing arts Transportation Warehouses ", storage areas Workshops Parking garages Plans Submitted for Common Areas Only' Main floor building lobbies (except mall concourses) Common areas, corridors, toilet facilities and washrooms, elevator lobbies LPA (W /sf) 1.0 1.0 1.0 1 , 1.5 1.2 1.6 1.0 0.5 1.4 0.2 1.2 0.8 Footnotes for Table 15 - 1 In cases in which a general use and a specific use are listed, the specific use shall apply. In cases in which a use is not mentioned specifically, the Unit Power Allowance shall be determined by the building official. This determination shall be based upon the most comparable use specified in the table. See Section 1512 for exempt areas. 2) The watts per square foot may be increased, by two percent per foot of ceiling height above twenty feet, unless specifically directed otherwise by subsequent footnotes. 3) Watts per square foot of room may be increased by two percent per foot of ceiling height above twelve feet. 4) For all other spaces, such as seating and common areas, use the Unit Light Power Allowance for assembly. 5) Watts per square foot of room may be increased by two percent per foot of ceiling height above nine feet. 6) Reserved. 7) For conference rooms and offices less than 150ft with full height partitions, a Unit Lighting Power Allowance of 1.10 w /ft` may be used. 8) Reserved. 9) For indoor sport toumament courts with adjacent spectator seating over 5,000, the Unit Lighting Power Allowance for the court area is 2.60 W /ft 10) Display window illumination installed within 2 feet of the window, provided that the display window is separated from the retail space by walls or at least three- quarter - height partitions (transparent or opaque). and lighting for free - standing display where the lighting moves with the display are exempt. An additional 1.5 w /ft of merchandise display luminaires are exempt provided that they comply with all three of the following: a) located on ceiling- mounted track or directly on or recessed into the ceiling itself (not on the wall). b) adjustable in both the horizontal and vertical axes (vertical axis only is acceptable for fluorescent and other fixtures with two points of track attachment). c) fitted with LED, tungsten halogen, fluorescent, or high intensity discharge lamps. This additional lighting power is allowed only if the lighting is actually installed. 11) Provided that a floor plan, indicating rack location and height, is submitted, the square footage for a warehouse may be defined, for computing the interior Unit Lighting Power Allowance, as the floor area not covered by racks plus the vertical face area (access side only) of the racks. The height allowance defined in footnote 2 applies only to the floor area not covered by racks. 1) TABLE 15 -1 Unit Lighting Power Allowance (LPA) Use' • Alder Square Environmental Health Services 1404 Central Avenue South, Suite 101 Kent, WA 98032 -7433 206 - 296 -4708 Fax 206 - 296 -0163 TTY Relay: 711 www.kingcounty.gov /health September 8, 2009 Rahim Karmali Eastside International Subways, LLC 2148 SW 336 St Federal Way, WA 98023 RE: PLANS AND SPECIFICATIONS FOR: Subway #38845 at 7100 Fun Center Way, Ste 140, Tukwila, SR1182670 P/E 6713 (Risk 3) Dear Mr. Karmali: d Public Health L Seattle & King County transmitted via electronic mail CITY OF LA .SFp 2 4 ?009 WA 98188 PE RMIT CE The plans and specifications for the above new project have been reviewed and, in accordance with the provisions of Title 5, the Code of the King County Board of Health (The Food Code) are hereby APPROVED and subject to the following conditions: • Splash guards are required between the 3- compartment sinks, 1 compartment vegetable sink and handsink, if the distance between the sinks are less than 18 inches. • It is strongly recommended that the handsink in the restrooms are connected to the main hot water heater instead of an insta -hot unit. Insta -hot units fail over time and may result in a red critical violation. • Chain restaurants will require nutrition labels for their menu items. For general information, please refer to www.metrokc.gov /health /healthyeatinq/ and click on another link that says "Learn more about nutrition menu labeling in King County ". Specific questions may be sent to MLandTFakingcounty.gov or 206 - 205 -3349 Your establishment has been assigned the following plan review service number (SR1182670). Please use this SR# in all future contact with us. As required in The Food Code, upon completion of the construction and before opening for business, the food service establishment operator /owner shall: 1. Complete an application for the annual operations permit if you don't have a current permit. Include a copy of this letter when applying for the annual permit. Please call me prior to paying for your permit to verify the correct fee. Be advised that the penalty for commencing operation of a food service establishment without the required permit is 50% of the applicable permit fee. 2. Obtain a preoperational inspection approval. Contact me at 206 - 205 -1903 at least one week in advance to schedule a preoperational inspection. Be sure all other inspections (plumbing, building, etc.) are done before you call the Health Department for an inspection. pol- w Rahim Karmali Page 2 September 8, 2009 This approval letter only addresses the equipment, plumbing fixture locations and finishes. It does not include piping, grease traps, back flow prevention or other piping systems. Your application for a food service establishment permit from Public Health Seattle & King County may be approved during this inspection, however it is the responsibility of the food service establishment operator /owner to obtain all necessary permits and approvals from other agencies. Operating the establishment without these required permits or approvals may subject the operator /owner to legal action by the appropriate agencies. If the establishment is opened without the Health Department preoperational inspection, it may be subject to closure. Failed preoperational inspections will require a $347.00 fee for a repeat inspection. Contact your local building department or water district if pre- treatment facilities are required when wastewater contains more than 100 parts per million by weight of fat, oil or grease of animal, vegetable or mineral petroleum origin. If you have any questions, please don't hesitate to contact me. Thank you for your compliance in this matter and I look forward to seeing you soon. Sincerely, Diane Agasid Bondoc, R.S. Plans Examiner Alder Square Office DAB: kw Enclosures • From: To: Date: Subject: Attachments: • • Bob Giberson Joanna Spencer; Mike Cusick 10/07/2009 1:14 PM Fwd: RE: Subway request for waiver of grease interceptor RE: Subway request for waiver of grease interceptor Lets do it like Westfield with monitoring, testing and periodic reporting. Thanks, Bob 00 - 20 • • Joanna Spencer - RE: Subway request for waiver of grease interceptor From: "Rahim Karmali" To: "'Bob Giberson "' Date: 10/06/2009 8:47 PM Subject: RE: Subway request for waiver of grease interceptor Bob, Thanks, Rahim Karmali 206 - 779 -0909 From: Bob Giberson [mailto:bgiberson @ci.tukwila.wa.us] Sent: Tuesday, October 06, 2009 3:31 PM To: Rahim Karmali Subject: Re: Subway request for waiver of grease interceptor Rahim: Regards, Bob Bob Giberson, P.E. Interim Public Works Director City of Tukwila Public Works 6300 Southcenter Blvd, Suite 100 Tukwila, WA 98188 Page 1 of 3 Yes, I have submitted for a building permit. The permit number is 009 -013 and Dave Larson is the Plans Examiner who has reviewed the file. As far as feasibility is concerned, I would like to add that the estimated cost of what the city requires for grease interceptors is more than 30% of my total TI's construction budget. That is a huge burden for a small business — especially in today's economic environment. When the City of Sammamish recently waived a Subway's requirement for a grease interceptor, they permitted the use of a smaller under - the -sink style grease trap to be used in its place. This is something that appears to be more appropriate for a Subway. Please consider this alternative when reviewing my case. Over the past few years, we have waived grease interceptors where they are not feasible or there is insufficient room. In other words, the waivers are case by case. To further review your case, have you submitted for a Building or Public Works permit? If so, what numbers so I can look up the plans. If not, can you send in a building /site plan? bOdt. 2° file: / /C:\Documents and Settings \joanna.TUKWILA\Local Settings \Temp\XPgrpwise \4A... 10/07/2009 Tel: (206) 431 -2457 Cel: (206) 571 -8163 Fax: (206) 431 -3665 • • »> On 09/29/2009 at 3:53 PM, <rahimnkarmali @gmail.com> wrote: 1. Dear Mr. Giberson, I have recently applied for a Tenant Improvements permit to construct a Subway restaurant inside the Tukwila Fun Center Retail Building located at 7100 Fun Center Way, Suite 150, Tukwila, WA. I understand from Development Bulletin C7, that Tukwila requires grease interceptors on all buildings where food preparation occurs, however, the Director of Public Works may waive this requirement if a business can show it produces less than 50 ppm of fats, oils, and greases. I am, therefore, requesting a waiver from you for a grease interceptor for the Subway at the Tukwila Fun Center Retail Building. The reasoning for this waiver request is as follows: A process review of Subway restaurants demonstrates that this is a Grease Free establishment. All foods arrive at Subway restaurants in either a "ready to eat" condition or a "heat and eat" condition. The only exception to this is bread and cookies — which are the only items subject to baking. There is no other frying, grilling, roasting or any other methods of cooking at Subway. Grease, cooking oil, or shortening is not used in the preparation of any food at a Subway Restaurant. a. In the case of our heat and eat food, the food is heated in a microwave or in our toaster ovens while on a sheet of wax paper. After warming, the wax paper is discarded into the garbage — thus not releasing any grease into the drain. b. As far as baking the bread and cookies is concerned, both these items arrive in "frozen ready to bake" form at Subway restaurants. Bread and cookies are taken directly from the freezer and placed on silicone bread forms to bake in our bread oven without the use of any cooking oils or sprays. c. Salad dressing oil and mayonnaise would be the only source of grease in a Subway restaurant. However, both these items are placed on ready to eat sandwiches and salads, and as a result, are consumed, taken out or discarded in the garbage with their containers, by Subway customers — once again not resulting in any discharge of grease to the drain. d. Cleaning of equipment — any trace amounts of grease splattering on equipment in the heating process are required to be cleaned using disposable towels and specialty chemicals. These towels are then disposed of in the garbage, thus not resulting in any grease discharge to the drain. Page 2 of 3 e. Cleaning of food holding smallwares — all meats are held in their respective sealed plastic packaging until ready for consumption. Then they are transferred to serving cambros and held in these cambros for a maximum of 48 hours. During this holding time, trace amounts of naturally occurring grease from meats can transfer on to the cambro containers. During dishwashing, this trace amount of grease is released into the drain. While this is a source of grease in Subway drain discharge, the minute quantities of this grease is well -below a threshold where it can be reasonably measured (not even a sheen is visible). At the 3- compartment sink maximum discharge rate of 45.8 GPM, 50 ppm equates to 0.00229 gallons of grease or 0.3 ounces. Remembering that Subway's brand positioning is low -fat healthy products, it is highly unlikely that this amount of grease would come from this method of grease transfer. 0.3 ounces of grease would be clearly evident in the 3- compartment sink (floating on top), however none is visible. file: / /C:\Documents and Settings \joanna.TUKWILA\Local Settings \Temp\XPgrpwise \4A... 10/07/2009 Sincerely, Rahim Karmali (206)779 -0909 S • A listing of ingredients used at Subway Restaurants is as follows: Page 3 of 3 • Vegetables: Fresh — Lettuce, Onions, Tomatoes, Green Peppers, Spinach. All are washed, cut and served on sandwiches and salads. • Vegetables: Packaged — sliced olives, sliced pickles, sliced peppercinis, sliced jalapenos. All are packaged ready to use. • Meats: Ready to use packages - Sliced Turkey, sliced roast beef, sliced ham, sliced salami, sliced pepperoni, cold cut trio (pre - portioned turkey based bologna, salami and pepperoni). • Meats: Frozen heat and eat packages (pre- cooked) — steak, chicken strips, chicken breast, meatballs. • Bread: Frozen bread sticks ready to bake. • Cookies: Frozen ready to bake. • Sauces: Salad dressing oil, salad dressing vinegar, mayonnaise, mustard, sweet onion sauce, honey mustard sauce, chipotle southwest sauce, ranch sauce, marinara sauce. Based on a review of processes at Subway restaurants it is apparent that this operation does not contain the necessary ingredients to produce a significant amount of grease in its wastewater. Therefore, it is very likely that this operation will produce well below 50 ppm of grease in its wastewater and, thus, should be exempt from the grease interceptor requirement. 2. A number of other jurisdictions in King County have recently exempted Subway restaurants from their grease interceptor requirements after a review of their grease discharge. Pierce County and the City of Sammamish are two such examples that I am aware of where within the last 6 months waivers have been granted to Subway restaurants exempting them from the installation of grease interceptors. Thank you for your time and consideration of this waiver request. Please feel free to contact me if you require anything further. No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.420 / Virus Database: 270.14.4/2417 - Release Date: 10/06/09 06:50:00 file: / /C:\Documents and Settings \joanna.TUKWILA \Local Settings \Temp\XPgrpwise \4A... 10/07/2009 ACTIVITY NUMBER: D09 -200 DATE: 09 -24 -09 PROJECT NAME: SUBWAY SITE ADDRESS: 7100 FUN CENTER WY, STE 105 X Original Plan Submittal Response to Incomplete Letter # Response to Correction Letter # Revision # After Permit Issued DEPARTMENTS: A's l i ing ivlsi t ^�/ AP Pr kluci ti Public Works IR Structural DETERMINATION OF COMPLETENESS: (Tues., Thurs.) Complete �QJ Comments: Permit Center Use Only INCOMPLETE LETTER MAILED: LETTER OF COMPLETENESS MAILED: Departments determined incomplete: Bldg ❑ Fire ❑ Ping ❑ PW ❑ Staff Initials: TUES /THURS ROUTING: Please Route Structural Review Required LI No further Review Required DATE: REVIEWER'S INITIALS: APPROVALS OR CORRECTIONS: Approved ❑ Approved with Conditions I I Not Approved (attach comments) Notation: REVIEWER'S INITIALS: Documents/routing slip.doc 2 -28 -02 • PERMIT CORD COPY PLAN REVIEW /ROUTING SLIP Incomplete n 64 0 1 311 !� Planning ivision Permit Coordinator n DUE DATE: 09-29-09 Not Applicable DUE DATE: 10-27 -09 DATE: I Permit Center Use Only CORRECTION LETTER MAILED: Departments issued corrections: Bldg ❑ Fire ❑ Ping ❑ PW ❑ Staff Initials: Kind of Fixture Fixture Units No. of Fixtures Total Fixture Units Public Private Public Private Bathtub and Shower 4 4 Shower, per head 2 2 Dishwasher 2 2 Drinking fountain (each head) 1 .5 Hose bibb (interior) 2.5 2.5 Clotheswasher or laundry tub 4 2 Sink, bar or lavatory 2 1 Li Sink, Clinic flushing 8 8 Sink, kitchen 3 2 2. Sink, other (service) 3 1.5 1 Sink, wash fountain, circle spray 4 3 Urinal, flush valve, 1 GPF 5 2 Urinal, flush valve, >1 GPF 6 2 Urinal, waterless 0 0 Water closet, tank or valve, 1.6 GPF 6 3 Z.. a 2 Water closet, tank or valve, >1.6 GPF 8 4 King County Department of Natural Resources and Parks Wastewater Treatment Division Non - Residential Sewer Use Certification • To be completed for all new sewer connections, reconnections or change of use of existing connections. • This form does not apply to repairs or replacements of existing sewer connections within five years of disconnect. Please Print or Type 7 I 00 Fu C PropertiStreet Address Tlaw d/u City - " Stat z IP Owner's Phone Number (with Area Code) Property Contact Phone Number (with Area Code) / Owner's Mailing Address `i 15 56 geit,e'vvE, WA ` 8Ni, • A. Fixture Units Fixture Units x Number of Fixtures = Total Fixture Units Residential Customer Equivalent (RCE) 20 fixture units equal 1.0 RCE Total No. of Fixture Units 20 Total Fixture Units Z q s/s RCE U J 1,1, / � j q r Grp �t // ne 's Nam Subdivision Name Lot # Subdiv. # Block # Building Name tp'U,) C let_ I 7/tl L (if applicable) -7 ^, � V �7 Property Tax ID # Party to be Billed (if different from owner) City or Sewer District 7u .4 4./1114 Date of Connection Side Sewer Permit # Please report any demolitions of pre - existing building on this property. Credit for a demolition may be given under some circumstances. Demolition of pre- existing building? ❑ Yes /No Was building on Sanitary Sewer? ' – t� - e — a;vtr bl «/ ' po e Was Sewer connected before 2/1/90? ❑ Yes No Sewer disconnect date: Type of building demolished? Mc' Dr yr' •i./ S re Request to apply demolition credit to multiple buildings? ❑ Yes J71No B. Other Wastewater Flow (in addition to Fixture Units identified in Section A) Type of Facility /Process: Estimated Wastewater Gallons /days Residential Customer Equivalents (RCE): 187 gallons per day equals 1.0 RCE Total Discharge (gal/day)'. 187 C. Total Residential Customer Equivalents: (add A & B) A B Print Name of Owner /Representative ��1 �'AttA 14 2- ° RCE DDS z RCE Pursuant to King County Code 28.84, all sewer customers who establish a new service which uses metropolitan sewage facilities shall be subject to a capacity charge. The amount of the charge is established annually by the King County Council at a rate per month per residential customer or residential customer equivalent for a period of fifteen years. The purpose of the charge is to recover costs of providing sewage treatment capacity for new sewer customers. All future billings can be prepaid at a discounted amount. All future billings can be prepaid at a discounted amount. Questions regarding the capacity charge or this form should be referred to King County's Wastewater Treatment Division at 206 - 684 -1740. I certify that the information given is correct. I understand that the capacity charge levied will be based on this information and any deviation will require resubmission of corre teegd��d to for determination of a revised capacity charge. Signature of Owner /Representative i\11r�,4V` Date ' " e l I 1 Bond Bond Company Name Bond Account Number Effective Date Expiration Date Cancel Date Impaired Date Bond Amount Received Date 1 WESTERN SURETY CO 15111297 03/06/2008 Until Cancelled 5/5/2008 EXPIRED $12,000.00 03/06/2008 License Name Type Specialty 1 Specialty 2 Effective Date Expiration Date Status SIMON**946KE SIMON CONSTRUCTION CONTRACTOR CERAMIC /PLASTIC /METAL TILE OTHER (SPECIFY) 5/5/2006 5/5/2008 EXPIRED Name Role Effective Date Expiration Date SIMONENKO, IGOR PARTNER /MEMBER 03/06/2008 Amount Insurance Company Name Policy Number Effective Date Expiration Date Cancel Date Impaired Date Amount Received Date Untitled Page • e General /Specialty Contractor A business registered as a construction contractor with LEd to perform construction work within the scope of its specialty. A General or Specialty construction Contractor must maintain a surety bond or assignment of account and carry general liability insurance. Business and Licensing Information Name Phone Address Suite /Apt. City State Zip County Business Type Parent Company SIMON INTERIOR LLC 4252202273 1103 126TH ST SE EVERETT WA 98208 SNOHOMISH Limited Liability Company UBI No. Status License No. License Type Effective Date Expiration Date Suspend Date Specialty 1 Specialty 2 602809381 ACTIVE SIMONIL925DF CONSTRUCTION CONTRACTOR 3/6/2008 3/6/2010 GENERAL UNUSED Other Associated Licenses Business Owner Information Bond Information Insurance Information Page 1 of 2 https://fortress.wa.gov/lni/bbip/Detail.aspx 10/12/2009 100 -1 1 0 ROOM 100 INDICATES LARGE SCALE PLAN Isw -1 INTERIOR ELEVATION WALL SECTION / DETAIL / BUILDING SECTION HD . • d , a .. • A r i r Arm= MINIM / (S88L DOOR NUMBER KEY NOTE WORK NOTE DEMOLITION NOTE ROOM NAME ROOM NUMBER DRAWING NUMBER SHEET NUMBER SHEARWALL - SEE SHEARWALL SCHEDULE WALL/ PARTITION TYPE INDICATOR REFERS TO DETAIL NO. ON A4.01 INDICATES WINDOW MARK INDICATES WINDOW IN NEW OPENING SHEET NUMBER DIRECTION DRAWING IS VIEWED DRAWING NUMBER DIRECTION DRAWING IS VIEWED DRAWING NUMBER SHEET NUMBER STRUCTURAL HOLD -DOWN LOCATION EXISTING WOOD STUD WALL NEW WOOD STUD WALL NEW FIRE RATED WALL MASONRY CONCRETE WOOD STEEL GYPSUM BOARD PLYWOOD BATT INSULATION ARCHITECTURAL TS1.01 A1.01 _..._. A2.01 A2.02 �yW A.F.F. ABOVE FINISHED FLOOR AB ANCHOR BOLT ACST. ACOUSTICAL ACT CEILING TILE ADJ. ALT.' ALUM. ANOD. APPX. ARCH. ASPH. B.O. BD. BITUM. BLDG. BLK'G BLK. BM. BOT. BUR C.I. C.I.P. C.J. C.J.F. C.T. CAB. CB CG. CL. CLG. CLR. CMU C.O. COL. CONC. CONN. TITLE SHEE_T_ 7. 1 -P-I -8 — = - -- EXISTING I PROPOSED - F - ST:FLOOR PLAN .. - S C Tib 1 PBO�QSED FIR ��l PROPOSED C11 -III' P �15G1G -_ .1L 14AN I " -F -CL NATIONAL CODES 2000,INTERNATIONAL BUILDING CODE - IBC 200& INTERNATIONAL MECHANICAL. CODE - IMC 2000INTERNATIONAL FUEL GAS CODE CODE - IFGC 200(9 INTERNATIONAL FIRE CODE - IFC 200G UNIFORM PLUMBING CODE - UPC 200E NATIONAL ELECTRIC CODE 2000 ACCESSIBLE & USABLE BUILDINGS & FACILITIES - ICC / ANSI 117.1 WASHINGTON STATE 1 WAC 51 -50 WASHINGTON STATE BUILDING CODE WAC 51 -52 WASHINGTON STATE MECHANICAL CODE WAC 51-54 WASHINGTON STATE FIRE CODE WAC51 -56 & 51 -57 WASHINGTON STATE PLUMBING CODE & STANDARDS WAC 51 -11 WASHINGTON STATE ENERGY CODE WAC 51 -13 WASHINGTON STATE VENTILATION AND INDOOR AIR QUAILITY CODE (WSVIAQ) WAC 296 -46B ELECTRICAL SAFETY STANDARDS, ADMINISTRATION AND INSTALLATION ANGLE AND CENTER LINE DIAMETER POUND PLUS OR MINUS EXISTING ADJACENT, ADJUSTABLE ALTERNATE ALUMINUM ANODIZED APPROXIMATE ARCHITECTURAL ASPHALT BOTTOM OF BOARD BITUMINOUS BUILDING BLOCKING BLOCK BEAM BOTTOM BUILT UP ROOFING BTWN. BETWEEN CONST. CONT. CONTR. CORR. CTSK. CU. FT. D.F. , D.S. DBL. DEPT. DEMO. DIA., _ DIM. DISP. DN. DR. DTL. DWG. E.J. E.W.C. EA. ELEC. ELEV. ENCL. EQ. EQUIP. EW EXH. EXIST. EXP. EXT. CAST IRON CAST IN PLACE CONTROL JOINT COMPRESSIBLE JOINT FILLER CERAMIC TILE F.F. CABINET CATCH BASIN CORNER GUARD CENTER LINE CEILING CLEAR CONCRETE MASONRY UNIT CLEAN OUT COLUMN CONCRETE CONNECTION CONSTRUCTION CONTINUOUS CONTRACTOR CORRIDOR COUNTERSUNK CUBIC FOOT DRINKING FOUNTAIN DOWNSPOUT DOUBLE DEPARTMENT DEMOLITION DIAMETER DIMENSION DISPENSER DOWN DOOR DETAIL DRAWING EXPANSION JOINT GL. ELECTRIC WATER COOLER EACH ELECTRICAL ELEVATION, ELEVATOR ENCLOSURE EQUAL EQUIPMENT EACH WAY EXHAUST EXISTING EXPANSION EXTERIOR FDN. FIN. FLASH. FLR. FRT. FT. FTG. FURR. 'G.I. G.B. G.C. GYP BD. GA. GALV. GLP H.B. H.C. H.M. H.P. HDWR. HORIZ. HT. HTR. I.D. I.E. IN. INSUL. F.D. FLOOR DRAIN INT. F.E. FIRE EXTINGUISHER F.E.C. FIRE EXTINGUISHER CABINET FINISHED FLOOR FIRST FLOOR F.H.S. FLAT HEAD SCREW L. F.M. FACTORY MUTUAL L.P. F.O.C. FACE OF CONCRETE L.S. F.O.S. FACE OF STUD L.F. F.R.P.P. FIBER REINFORCED PLASTIC PANEL LAM. JAN. JST. JT. /JTS. LB. LIN. OTHER APPLICABLE CODES FOUNDATION FINISH FLASHING FLOOR FIRE RETARDANT TREATED FOOT FOOTING FURRING GALVANIZED IRON GRAB. BAR GENERAL CONTRACTOR GYPSUM WALL BOARD GAUGE GALVANIZED GYPSUM LATH & PLASTER GLASS, GLAZING HOSE BIB HANDICAPPED/ HOLLOW CORE HOLLOW METAL HIGH POINT HARDWARE HORIZONTAL HEIGHT HEATER INSIDE DIAMETER INVERT ELEVATION INCH INSULATION INTERIOR JANITOR JOIST JOINT, JOINTS LENGTH, LONG LOW POINT LANDSCAPE LINEAR FOOT, LINEAL FOOT LAMINATE, LAMINATED POUND LINEAL LIQ. LT. LT. WT. M.B.S. M.O. M.R. MAS. MAX. MECH. MEZZ. MFG. MFR. MH. MIN. MISC. MTD. MTG. MTL. MULL. N.I.C. N.T.S. NO. NOM. O.A. O.C. O.D. O.H. 0/ OCC. OPN'G OPP. P. LAM. P.L. P.R.V. P.T. PERP. PL. PLMB'G PLYWD. PNL. PR. PROJ. PT. LIQUID LIGHT LIGHT WEIGHT METAL BUILDING SUPPLIER MASONRY OPENING MOISTURE RESISTANT MASONRY MAXIMUM MECHANICAL MEZZANINE MANUFACTURING MANUFACTURER MANHOLE MINIMUM MISCELLANEOUS MOUNTED MOUNTING METAL MULLION NOT IN CONTRACT NOT TO SCALE NUMBER NOMINAL OVERALL ON CENTER OUTSIDE DIAMETER OVERHEAD OVER OCCUPANT(S) OPENING OPPOSITE PLASTIC LAMINATE PROPERTY LINE PRESSURE REDUCING VALVE PRESSURE TREATED PERPENDICULAR PLATE PLUMBING PLYWOOD PANEL, PANELING PAIR PROJECT POINT CON T ACTS Owner: ` ;� = ".I-I 779 - 09o9 M61.-1 -- - 141 X023 Chandler Stever Architects Architect: Juristiction: PTN. PARTITION R R.B. R.D. R.L. R.O. R.W.L. S.I.V. S.J. S.M. S.O.I.C. 1715 223 PL NE Sammamish, WA 98074 Tel. 425 985.2176 Contact: Chandler Stever Q.T. QUARRY TILE QTR. QUARTER RADIUS, RISER RESILIENT BASE ROOF DRAIN RAIN LEADER - ROUGH OPENING RAIN WATER CLOSET RCP REFLECTED CEILING PLAN REF. REFRIGERATOR REIF. REINFORCING REQ'D REQUIRED RM. ROOM S.0 SOLID CORE S.F. SQUARE FOOT S.I. SQUARE INCH S.I.C.. SUPPLIED & INSTALLED BY CONTRACTOR S.I.O. SUPPLIED & INSTALLED BY OWNER SUPPLIED & INSTALLED BY VENDOR SCORE JOINT SHEET METAL SUPPLIED BY OWNER & INSTALLED BY CONTR. S.S. SERVICE SINK, STAINLESS STEEL S.V. SHEET VINYL SAN. SANITARY SEWER SCHED. SCHEDULE SECT. SECTION SHT. SHEET SIM. SIMILAR SMS SHEET METAL SPEC'D SCREW SQ. SPECIFIED SST SQUARE STD. STAINLESS STEEL STL. STANDARD STEEL STOR. STORAGE STRUCT.STRUCTURAL SUSP. SUSPENDED SYM. r SYMMETRICAL SYS. T &B T &G T. T.G. T.O. T.O.C. T.O.M. T.O.S. T.O.W. T.S. TEL. TEMP. TYP. U.B.C. U.L. U.N.O. UTIL. V.B. V.C.T. V.T. V.T.R VERT. VEST. W.C. W.P. W.R. W.W.F. W.W.M. W/ W/O WD. WIN. WS. WSCT. WT. SYSTEM Y.D. YARD DRAIN oF._:. I IACk11I: -A C31XQ 67E 16 tA)(L , GSA `b I • 1 <ihi -coo App 121Alar TOP & BOTTOM TONGUE & GROOVE TOP, TREAD TEMPERED GLASS TOP OF TOP OF CONCRETE TOP OF MASONRY TOP OF STEEL TOP, . OF STUD TOP OF WALL TUBE STEEL TELEPHONE . TEMPERED TYPICAL UNIFORM BUILDING CODE UNDERWRITER'S LABORATORIES UNLESS NOTED OTHERWISE UTILITY VAPOR BARRIER VINYL COMPOSITION TILE VINYL TILE VENT THROUGH ROOF VERTICAL VESTIBULE WATER CLOSET WATERPROOF WATER RESISTANT WELDED WIRE FABRIC WELDED WIRE MESH WITH WITHOUT WOOD WINDOW WEATHERSTRIP, WOOD SCREW WAINSCOT WEIGHT BUILDING INF CONSTRUCTION TYP IRr[E. EXISTING BUILDING FLOOR-AREA:- CAf NUMBER OF EXISTING STORIES I HEI_G HT _ D 200fc1eG OCCUPA_ NCY.TYPE: _ p'c 't. ocz urp I_D ( Srpoopt TAX PARCEL NUMBER: .14E2.‘50 , F4cN1e .n Hslphta J ION ( EXISTING) 200E lBC TYPE V -B BUIL c�fiTi:t'afTloN -/� l Dom —. • g . _ 4 =N ,Au-w1& 04.c1-0/2F4 . g - (_" A ^.... S • F e Yrs = 3d, 2 aecoP PORTION OF W 1/2 OF SECTION 24 -23 -04 - BEGIN INTERSECTION OF 2M LINE OF PRIMARY STATE HIGHWAY NO 1, GREEN RIVER INTERCHANGE UNDER K C SUPERIOR COURT CAUSE NO 596089 STA POC (2M) 134 +28.56 WITH A -LINE STA POT (A) 102 +82.12 WITH STATE OF WASHINGTON DEPT OF TRANSPORTATION SR 405 GREEN RIVER INTERCHANGE R/W STA 99 +00 TO STA 120 +00 SHEET 2 OF 2 REVISED DECEMBER 31, 1992 TH N 42 -30 -02 E ALONG C/L OF SAID A -LINE 88.55 FT TO STA 103 +70.67 OF SAID A -LINE TH N 47- 29 -58' W 60 FT TO POINT ON NLY R/W OF SAID PRIMARY STATE HIGHWAY NO 1 SAID POINT BEING BEGINNING OF CURVE CONCAVE TO SOUTH RADIUS OF 163 FT AND ALSO BEING POINT OF. BEGINNING TH NLY, ELY &SLY ALONG SAID R/W ON ARC OF SAID CURVE THRU C/A OF 64 -48 -29 184.37 FT TH LEAVING SAID "R /W & BEARING N 21-14-41 E 38.16 FT TH N 64 -48 -08 W 5.90 FT TH N 22 -58- 18 W 166.10 FT TH N 22 -01-42 E 229.49 FT TO POINT ON ORDINARY HIGH WATER LINE OF GREEN (WHITE) RIVER AS APPEARED ON AUGUST 11, 1997 TH ALONG SEPARATE PERMIT REQUIRED FOR: el chanica1 Ll ectrical Vmbing i Piping 9 City of Tukwila BUILDING DIVISION 4:I 7 2 7AZ - acccraA ij- 4-aAl2 - S2 naerny auvm ral . Par* ORDINARY HIGH WATER OF SAID RIVER THE FOLLOWING COURSES AND FILE COPY Plan review approval is subject to errors and omissions DISTANCES S 70 -00 -00 W 39.06 FT TH S 73-00-00 W 65 FT TH S 67 -00 -00 W 100 FT Permit No. wq.acio. TH S 57 -40 -00 W 30 FT TH S 63 -50 -00 W 35 FT TH S 56 -30 -00 W 100 FT TH S 51-00- 00 TO . W NELY 50 FT TH S FOR 35 -40 2M - 00 INE W 40 TH FT SLY TH S ALON 39 -00 -00 W 60 FT TH S 52 -20 -00 W 50 FT a R/W -L R/W TO ITS INTERSECTION W Eprovai of construction documents does not authorize NLY R/W OF SAID A -LINE TH N 42 -30 -02 E 9.42 FT TO POINT. OF BEGINNING - the violation of any adopted code or ordinance. Recei pt AKA ADJUSTED PARCEL 1 OF CITY OF TUKWILA BOUNDARY LINE ' roved Fi Id Co y and conditions is acknowledged: ADJUSTMENT NO L98 -0028 RECORDING NO 9806309017 pp t ry B -, - Date: City Of ltikwila BUILDING DIVISION ruftf r ye. Uy �oo,t� t ' tk i a ■ x� " ,C �.." Ii �' w SITE REVISIONS angel shall be made to the scope of work without prior approval of Tukwila Building Division. : Revisions will require a new plan submittal d may include addidional plan review teems, REVIEWED FOR CODE COMPLIANCE APPRDVED OCT 0 9 2009 � WIC City of Tukwila BUILDING DIVISION RECEIVED CITY OF TUKWILA SEP 2 4 2009 PERMIT CENTER tc CT' TSI-01 tr. Property Line — w chain link fe existing equi Fen to City of Tukwila. Fire truck access route Concrete 13.00 21.10 FIRE TRUCK feet Width 9.00 Track 1 9.00 Lock to Lock Time s 6.00 Steering Angle 40,00 Property Line 4. 4. / • 4it 0/" S • , 20' / , Power easement • Drain to 21 Light Pole NORTH Sanitary Sewer ot/ / 0 0 ' Offset from`, // ordinary high / / 1 water line SITE PLAN SCALE: 1!'=20' , cItc` I I I Line of ordinary „/ high water 40' Offset. from „/ ordinary high water line "7 21' Light Pole 9 .3 4 (s1\ sr. 21' Light Pole 1`;\• <04. s zt. 200' Offset from / ordinary high / water line 1 1 Future 4%% ,- sidewalk 4. by city w Existing ) Light sta.hdard I .■ .................... • ••■ cse' Property Line Landscape \--- Buffer . • . ; • • . • . . Cente Light standard/ \ underground power)oc p r Existing Light ttalided erty Line Existin 01) U, / standard 7 Asphalt V I with figured storm ge plan. IVIL). I 7 Existing Light standard , ° Thc \s ' 6 Property Line 7 New. Striping Asphalt A Odst g outtt 140 ck03 t PARKING DATA REQUIRED PARKING B,M, OCCUPANCY= 2.511000 S.F. 9 SF (2.6/1000 S.F.) = 24.6 STALLS TOTAL STALLS REQUIRED= 25 STALLS STANDARD (19'x9')= (C) COMPACT (16'4') = (HC) HANDICAP (19'x9) = TOTAL STALLS = 74 STALLS 5 STALLS 4 STALLS 83 STALLS 00 PCEITyR SEP4 ZO 91 Family Fun Center • Retail Building 7100 FUN CENTER WAY TUKWILA, WA H2 Office LLC .*. 7300 FUN CENTER WAY TUKWILA, WA 1110 112TH AVE. NE I SUITE 500 BELLEVUE, WA I 98004 t 425.463.2000 I f 425.463.2002 MulvannyG2.com PERMIT SET 4.21.06 REVIEWED FOR CODE COMPLIANCE APPROVED OCT 09 2009 Cityof Tukwila BUILDING DIVISION Jerry Quinn Lee, Architect 3760 r t • -• ortiroaiins • REGISTERED A'C41 ECT UI LEE ATE OF WASHINGTON 03-1260-02 PM: Weylin Thompson DRAWN: JAG 8-1-03 SITE PLAN ig Ai.N 0 MuivannyG2 Architecture: M rights reserved. No part of this document may be reproduced In any form or by any means without permission M writing frorn.MulvannyG2 Architecture. DATE DESCRIPTION 421.06 ISSUED FOR PERMIT q 4131 1) 8 0. 1/7 — 'fi 2 fgett(ev • . • tr. Property Line — w chain link fe existing equi Fen to City of Tukwila. Fire truck access route Concrete 13.00 21.10 FIRE TRUCK feet Width 9.00 Track 1 9.00 Lock to Lock Time s 6.00 Steering Angle 40,00 Property Line 4. 4. / • 4it 0/" S • , 20' / , Power easement • Drain to 21 Light Pole NORTH Sanitary Sewer ot/ / 0 0 ' Offset from`, // ordinary high / / 1 water line SITE PLAN SCALE: 1!'=20' , cItc` I I I Line of ordinary „/ high water 40' Offset. from „/ ordinary high water line "7 21' Light Pole 9 .3 4 (s1\ sr. 21' Light Pole 1`;\• <04. s zt. 200' Offset from / ordinary high / water line 1 1 Future 4%% ,- sidewalk 4. by city w Existing ) Light sta.hdard I .■ .................... • ••■ cse' Property Line Landscape \--- Buffer . • . ; • • . • . . Cente Light standard/ \ underground power)oc p r Existing Light ttalided erty Line Existin 01) U, / standard 7 Asphalt V I with figured storm ge plan. IVIL). I 7 Existing Light standard , ° Thc \s ' 6 Property Line 7 New. Striping Asphalt A Odst g outtt 140 ck03 t PARKING DATA REQUIRED PARKING B,M, OCCUPANCY= 2.511000 S.F. 9 SF (2.6/1000 S.F.) = 24.6 STALLS TOTAL STALLS REQUIRED= 25 STALLS STANDARD (19'x9')= (C) COMPACT (16'4') = (HC) HANDICAP (19'x9) = TOTAL STALLS = 74 STALLS 5 STALLS 4 STALLS 83 STALLS 00 PCEITyR SEP4 ZO 91 Family Fun Center • Retail Building 7100 FUN CENTER WAY TUKWILA, WA H2 Office LLC .*. 7300 FUN CENTER WAY TUKWILA, WA 1110 112TH AVE. NE I SUITE 500 BELLEVUE, WA I 98004 t 425.463.2000 I f 425.463.2002 MulvannyG2.com PERMIT SET 4.21.06 REVIEWED FOR CODE COMPLIANCE APPROVED OCT 09 2009 Cityof Tukwila BUILDING DIVISION Jerry Quinn Lee, Architect 3760 r t • -• ortiroaiins • REGISTERED A'C41 ECT UI LEE ATE OF WASHINGTON 03-1260-02 PM: Weylin Thompson DRAWN: JAG 8-1-03 SITE PLAN ig Ai.N /5-0 A •• L41i2 1.02P 1AMTS P& Gli7e 1-54 < • r pap F 0 1Zeallz001 -14-ChlP F. cove- 44 w i i jItMa • • F-KIST" 13# A C.A9Z___4 ?v• A e hi 411- > t3Y 1, P 11, 6 45 4 : FrIVIZ - TC1Tre ? 41 e* "vgr•amilfr a • I 41-J (-7-y6 -co" Az,ot 5t-oe-Iq Pct. - 11 V 043 5ACH ?taw P • 1 171-e- , G t.,3656- 1 1=6-17-771( latz.64 tK _ 11 400siss @ 74S rF Ir3cori pefizc1a14 e-ot H16. reif /" 5 H6t crcF°1-rert 01 t ±1 , 14 1 4 6 .-19-; (9 C , Arri-V P441.61E1. .7 7 1 4 :"-F-11- sl-PE- I e3 "0, ol1 "TM MUP -.rim.1 • 2=1"-ati # SEE; c_11: API9Rai 11 _Pf-rT; •ANP Aik rrrreirie0 4 _-_-__ekQuI , 4 -6 t...e.k.,1z. C-01 t • % L 12MZS - TE 7- SW.gari ut le.141-1EFIA4 .. V14-1•1 iz9pm Plg94 e Exi9TI ) 0 0 3><7 aici- (p -116tH WALL. PLAN t. boc/v- 20° - Wrr 11117 = .10;741:0. • '' , TUtU- AffeA MoVf-12 ri4 m4•11 City of of Tukwila BUILDING DIVISION RECEIVED CITY OF TUKWILA SEP 2 4 2009 PERMIT CENTER REVIEWED CODE COMPLIANCE APPPnvpo OCT 09 2i • .• COMPRESSION STRUTS:STEEL SECTION W/ L/R RATIO OF 200 MAX. ATTACH TO MAIN RUNNERS W/1/4" MACHINE BOLT & TO STRUCTURE W/ 3/16" DIA POWER DRIVEN STUD. COMP. STRUT SHALL NOT REPLACE HANGER WIRE. 12 GA. VERT HANGER WIRE © 4'-0" EACH WAY W/3 TIGHT TURNS IN 1 1/2". BOTH ENDS TYP 3/4' CLEAR ACOUSTIC TILE 3111IMMIMIMI DETAIL WAL ‘111P.Amppy oft".11. ,•1•" , ftrift uarn 45 VAX TYP NMI II.. iuu I i all NN. I . g_ AGI WIN • 'Ye" MG 1 I GPI A ry, 0.• FATUtzf... • ea 1 1-011-11"'s fleas Of 2"MAX FRO BRACING WIRES TO CROSS RUNNERS NOTE: SUSPENDED CLG. TIE TWO ADJACENTWALL TO CLG MAIN & CROSS RUNNERS PERIMETER SUPPORT 3. WHEN THE DISTANCE BETWEEN THE STRUCTURAL DECK AND THE CEILING EXCEEDS 4', THE SPACING OF THE VERTICLE H4NGERS SHALL NOT EXCEED 2' 0.C. ALONG THE ENTIRE LENGTH OF TK MEANS OF EGRESS SERVICING AN OCCUPANT LOAD OF 30 OR MORE, AND AT LOBBIES ACCESSORY TO GROUP A OCCUPANCIES. RCA 4-74 W/ APPROVED CLG. #22501 12 GA. BRACING WIRE W/4 TIGHT TURNS IN 1 1/2". BOTH ENDS TYP irAw °1 1wftW, To" CROSS RUNNER MAIN RUNNER 4'-0' 12'-0" 0 C. PLAN I T 45 0 COUSTIC TILE CLG #12 GA. WIRE WALL SEE DETAIL ELEVATION _ • 1 ckLe x_e1..%riW NT lAllfil;r04LTP4Y — TFr ce+ Flefr e 10 AFF b CI- 206 A-PF, - PAINT rill 4Lar Zof-2 oulk.- ?Ida 0-1zIe _Ardmg rro4PART" 1.0F 2 5rer-I F1 14 (TY/9) REVIEWED FOR CODE COMPLIANCE APPROVED OCT 09 2009 City of Tukwila BUILDING DIVISION RECEIVED CITY OF TUKVVILA SEP 2 4 2009 PERMIT CENTER TYPE OF USE MINIMUM MANEUVERING CLEARANCES .. ..., . APPROACH DIRECTION . DOOR SIDE • PERPENDICULAR TO DOORWAY . ' • . PARALLEL TO DOORWAY (BEYOND LATCH UNLESS. NOTE:D) • FROM FRONT PULL 60 INCHES .... 18 INCHES . FROM FRONT PUSH 48 INCHES • : . 0 INCHES - : .(3) -.. FROM HINGE SIDE PULL 60: INCHES . . 36 INCHES FROM HINGE SIDE PULL . 54 INCHES • - . 42 INCHES , FROM HINGE SIDE PUSH . . 42 INCHES (1). i. 22 INCHES (3 & 4) • FROM LATCH SIDE PULL .• 48 INCHES (2) ' ' 24 INCHES FROM LATCH SIDE PUSH 42 INCHES . (3) ' . 24 INCHES NOTES; 1. PROVIDE P-LAM UP TO 4'-0" ON ALL WALLS WITH J-MOULD AT TOP TRIM 2. RESROOM FLOOR TO BE SHEET VINYL WITH 6" INTEGRATED COVE BASE WITH 3/8" MIN. RADIUS 3. MAXIMIM REACH DEPTH AND HEIGHT PER ICC TABLE 606.7 39"-41" MIN 36" GRAB BAR 12" r42N GRAB B a WALL HUNG TOILET A. C. SCALE: NTS 54" MIN. W.C. to rz • 7 • - 1 - MOUNTING HEIGHTS SCALE: NTS 1-1/4" - 2" MAX PER ICC 609.2.1 FLUSH HANDLE ON WIDE SIDE OF STALL OR ROOM c TOILET PAPER DISPENSER - 7"-9" a a ro C) I a s t. SEAT COVER DISPENSER TOILET SOAP TOILET PAPER DISPENSER DISPENSER MAX GRAB BAR SECTION . 12" MAX B. t■ 0 39"-41" MIN 42" MIN . 24" INSULATE SINK PIPES LAVATORY R ol 0 ‚CD NO MIN A CESSIBLE PER ICC 604.2 17"-19" - AMBULATORY PER ICC 604.2 MIRROR co 0 ro co 4 I • d GRAB BARS PER ICC 604.5 SEE 10/A6.02 BACKING DETAIL 1. 604.5.1 FIXED SIDE WALL GRAB BARS; RXZED SIDEWALL GRAB BARS SHALL BE 42 INCHES MIN. IN LENGTH, LOCATED 12 INCHES MAX. FROM THE REAR WALL AND EXTENDING . 54 INCHES MIN. FROM THE REAR WALL IN ADDITION, A VERTICAL GRAB BAR 18 INCHES MIN. IN LENGTH SHALL BE MOUNTED WITH THE BOTTOM OF THE BAR LOCATED BETWEEN 39 INCHES ABD 41 INCHES ABOVE THE FLOOR, AND WITH THE CENTER LINE OF THE BAR LOCATED BETWEEN: 39 INCHES AND 41 INCHES FROM THE REAR WALL 9. 604.5.2. REAR WALL GRAB RARS! THE RFAR WALL GRAB BAR SHALL BE 36" MIN. IN LENGTH, AND EXTEND FROM THE CENTERLINE OF THE WATER CLOSET 12 INCHES MIN. ON THE SIDE CLOSEST TO THE WALL, AND 24 INCHES MIN. ON THE TRANSFER SIDE 3 609.1 GENERAL; GRAB BARS IN. ACCESSIBLE TOILET OR BATHING FACILITIES SHALL COMPLY WITH SECTION 609. 4. 609.2.1 CIRCULAR CROSS SECTION; GRAB BARS WITH A CIRCULAR CROSS SECTION SHALL HAVE AN OUTSODE DIAMETER OF 1-1/4" MIN. AND 2 INCHES MAX. 5. 609,2.2 NON-CIRCULAR CROSS SECTION; GRAB BARS WITH A NON CIRCULAR CROSS SECTION SHALL HAVE A CROSS SECTION DIMENSION OF 2 INCHES MAX. AND A PERIMETER DIMENSION OF 4 INCHES MIN. AND 4.8 INCHES MAX. 6. 609.2.3 SPACING; THE SPACE BETWEEN THE WALL AND THE GRAB BAR SHALL BE 1-1/2". THE SPACE BETWEEN THE GRAB BAR AND PROJECTING OBJECTS BELOW AND AT THE ENDS. OF THE GRAB BAR SHALL BE 1-1/2" MIN. THE SPACE BETWEEN THE GRAB BAR AND PROJECTING OBJECTS ABOVE THE GRAB BAR SHALL BE 12" MIN. 7. 609.4 POSITION OF GRAB BARS; GRAB BARS SHALL BE INSTALLED IN A. HORIZONTAL POSITION, 33 INCHES MIN. AND 36 INCHES MAX. ABOVE THE FLOOR, MEASURED TO THE TOP OF THE GRIPPING SURFACE. AT WATER CLOSETS PRIMARILY FOR CHILDRENS USE COMPLYING WITH SECTION 604.10, GRAB BARS SHALL BE INSTALLED IN A HORIZONTAL POSITION 18" MIN. AND 27" MAX ABOVE THE FLOOR MEASURED TO THE TOP OF THE GRIPPING SURFACE 8. 609.5 SURFACE HAZARDS; GRAB BARS, AND ANY WALL OR OTHER SURFACES ADJACENT TO GRAB BARS, SHALL BE FREE OF SHARP OR ABRASIVE ELEMENTS. EDGES SHALL BE ROUNDED 9. 609.6 FITTINGS; GRAB BARS SHALL NOT ROTATE WITHIN THIER FITTINGS 9 - GRAB BARS 18" VERTICAL GRAB BAR LLi 0 • ( • 0 0) 0 In - w cc a_ z a N DISPENSER/ WASTE RECEPTACLE a CN1 SCALE: 3/4" = 1'-0" ci 0 0 = = METAL STUDS PER PLAN 1 /4" DIA. SHT. MTL. , SCREWS TO METAL BLKG. 1 1 /4" DIA. GRAB BAR 0 NAPKIN/ TAMPON DISPENSER •6 GA. METAL STUD BLKG. W/(1) A35 CLIP TOP AND BOTTOM a 0 , IN/ TAMPON DISPOSAL MIRROR (SAFETY GLAZING) -\ LEVER VALVE PROTECTED PIPING PIPING ICC 606.6 6" MAX // PER ICC 306.2.4 NOTES: 1. TOE CLEARANCE 30" MINIMUM IN WIDTH PER ICC 117.1 306.2.5 2. KNEE CLEARANCE 30" MINIMUM IN WIDTH PER ICC 117.1 306.3.5 3. CONTRASTING COLOR BEPNEEN COUNTER TOP AND FLOORING 4. CLEAR KNEE SPACE TO BE 29" AFT MIN. 5. PER ICC 306.3.4 CLEARANCE REDUCTION. BETWEEN 9" AND 27" ABOVE THE FLOOR, HTE KNEE CLEARANCE SHALL BE PERMITTED TO BE REDUCED AT A RATE OF 1" FOR EACH 6" IN HEIGHT 6 - ADA CLEARANCE 17" MIN. - 25" M KNEE / TOE CLEARAN 19" MAXIMUM 8" MIN - A 11" MIN. EE CLEARANC 603 TOILET AND BATHING ROOMS; 10 - ADA GRABBAR ATTACHMENT SCALE: 3" = 1t-0" 1. 603.2.1 TURNING SPACE; A TURNING SPACE: COMPLYING WITH 304 SHALL BE PROVIDED WITHIN THE ROOM 2. 603.2.2 OVERLAP; CLEAR FLOOR SPACES, CLEARANCES AT FIXTURES, AND TURNING SPACES SHALL BE PERMITTED TO OVERLAP 3. 603.2.3 DOOR SWING: DOORS SHALL NOT SWING INTO THE CLEAR FLOOR SPACE OR CLEARANCE FOR ANY FIXTURE. EXCEPTIONS: 1. DOORS TO A TOILET AND BATHING ROOM FOR A SINGLE OCCUPANT, ACCESSED ONLY THROUGH A PRIVATE OFFICE AND NOT FOR COMMON USE OR PUBLIC USE SHALL BE PERMITTED TO SWING INTO THE CLEAR FLOOR SPACE, PROVIDED THE SWING OF THE DOOR CAN BE REVERSED TO MEET SECTION 603.2.3 2. WHERE THE ROOM IS FOR INDIVIDUAL USE AND A CLEAR FLOOR SPACE COMPLYING WITH SECTION 305.3 IS PROVIDED WITHIN THE ROOM BEYOND THE ARC OF THE DOOR SWING. 4. 603,3 MIRRORS; MIRRORS LOCATED ABOVE LAVATORIES, SINKS OR COUNTERS SHALL BE MOUNTED WITH THE EIOTTOM EDGE 40 INCHES MAX. ABOVE THE FLOOR. MIRRORS NOT. LOCATED ABOVE LAVATORIES, SINKS OR COUNTERS SHALL BE MOUNTED WITH THE BOTTOM EDGE OF THE REFLECTING SURFACE 35 INCHES MAX. ABOVE THE FLOOR 5. 603.4 COAT HOOKS AND SHELVES; COAT. HOOKS SHALL BE LOCATED WITHIN ONE OF THE REACH RABGES SPECIFIED IN SECTION 308. SHELVES SHALL BE 40 INCHES MIN. AND 48 INCHES MAX. ABOVE THE FLOOR. 6. 604.1 GENERAL; ACCESSIBLE WATER CLOSETS AND TOILET COMPARTMENTS SHALL COMPLY WITH SECTION 604. COMPARTMENTS CONTAINING MORE THAN ONE PLUMBING FIXTURE SHALL COMPLY WITH SECTION 603. WHEELCHAIR ACCESSIBLE COMPARTMENTS SHALL COMPLY WITH SECTION 604.8. AMBULATORY ACCESSIBLE COMPARTMENTS SHALL COMPLY WITH SECTION 604.9 E Z Ed M 0 rr) N O C•40 Nr. N NOTES: 1. ADD 6 INCHES IF CLOSER AND LATCH PROVIDED 2. ADD 6 INCHES IF CLOSER PROVIDED 3. ADD 12 INCHES BEYOND LATCH IF CLOSER AND LATCH PROVIDED 4. BEYOND HINGE SIDE 32" MIN 32" MIN, ( I (A) HINGED DOOR 7 - DOOR CLEARANCE SCALE: NTS CENTERLINE OF SIGN 11 - SIGNAGE SCALE: NTS 7. 604.2 LOCATION; THE WATER CLOSET SHALL BE LOCATED WITH A WALL OR PARTITION TO THE REAR AND TO ONE SIDE THE CENTERLINE OF THE WATER CLOSET SHALL BE 16 INCHES MINIMUM TO 18 INCHES MAXIMUM FROM THE SIDE WALL OR PARTITION. WATER CLOSETS LOCATED IN AMBULATORY ACCESSIBLE COMPARTMENTS SPECIFIED IN SECTION 604.9 SHALL HAVE THE CENTERLINE OF THE WATER CLOSET 17 INCHES MIN. TO 19 INCHES MAX. FROM THE SIDE WALL OR PARTITION 604.3 CLEARANCE; 8. 6O4.3.1.-SIZE; CLEARANCE AROUND A WATER : CLOSET 60 INCHES MINIMUM, MEASURED PERPENDICULAR FROM THE SIDEWALL, AND 56 INCHES MIN. MEASURED PERPENDICULAR FROM THE REAR WALL, SHALL BE PROVIDED 8. 604.3.2 OVERLAP; THE REQUIRED CLEARANCE AROUND THE WATER CLOSET SHALL BE PERMITTED TO OVERLAP THE WATER CLOSET, ASSOCIATED GRAB BARS, PAPER DISPENSERS, SANITARY NAPKIN RECEPTACLES, COAT HOOKS, SHELVES, ACCESSIBLE ROUTES, CLEAR FLOOR SPACE AT OTHER FIXTURES AND THE TURNING SPACE NO OTHER FIXTURES ort,:013§TRUCTIONt SHALL BE WITHIN THE REQUIRED WATER.. CLOSET CLEARANCES. 9. 604.4 HEIGHT; THE ;HEIGHT OF WATER CLOSET SEATS SHALL BE 17 INCHES MIN. AND 19. INCHES MAX. ABOVE THE FLOOR, MEASURED' TO THE Top OF HTE T. SEATS SHALL NOT BE SPRUNG TO RE TO A LIFTED POSITION. TABLE 404.2.3.1 MANEUVERING AT MANUAL SWINGING DOORS (B) SLIDING DOOR 4' 32" MIN * )( VP I I (C) FOLDING DOOR CENTERLINE OF DOOR AND SIGN MEN / WOMEN OR UNISEX AS REQUIRED PER PLAN SEE PLAN FOR SIGNAGE LOCATIONS RESTROOM SIGNAGE NOTE: IDENTIFICATION SYMBOLS PER ADA SECT. 4.30 SIGNAGE INTERNATIONAL SYMBOL OF ACCESSIBILITY PER ICC ANSI 117.1-2003 FIG. 703.6.3.1 5 A.F.F. • (D) DOORWAYS WITHOUT DOORS 1 \ 32 CLEAR ELEVATION * °" - RESTROOM SIGNAGE SCALE: 3 " = IBC SECTION 1110 - SIGNAGE 1110.1 SIGNS REQUIRED ACCESSIBLE ELEMENTS SHALL BE IDENTIFIED BYC1HE INTERNATIONAL SYMBOL OF ACCESSIBILITY AT THE FOLLOWING LOCATIONS 7. UNISEX TOILET AND BATHING ROOMS ICC ANSI 117.1 703.5 PICTOGRAMS. 703.5.1 GENERAL. PICTOGRAMS SHALL COMPLY WITH SECTION 703.5 7(13.5.2 PICTOGRAM FIELD. PICTOGRAMS SHALL HAVE A 6 INCH FIELD MIN. IN HEIGHT. CHARACTERS OR BRAILLE SHALL NOT BE LOCATED IN TFIE PICTOGRAM FIELD. 703.5.3 FINISH AND CONTRAST. PICTOGRAMS AND THEIR FIELDS SHALL HAVE A NON GLARE FINISH. PICTOGRAMS SHALL CONTRAST WITH THIER FIELDS, WITH EITHER A LIGH1" PICTOGRAM ON A DARK FIELD OR A DARK PICTOGRAM ON A LIGHT FIELD. 703.5.4 TEXT DESCIPTORS. WHERE TEXT DESCIPTORS ARE REQUIRED, THEY SHALL BE LOCATED DIRECTLY BELOW THE PICTOGRAM FIELD. TEXT DESCIPTORS SHALL COMPLY WITH SECTIONS 703.3 AND 703.4 703.6 SYMBOLS OF ACCESSIBILITY • b. NOTE: PROVIDE AT ic TOILET ROOM (MOUNT CENTERED ON DOOR) SEE DETAIL 1/2" RADIUSED CORNERS TYPICAL WHITE GRAPHIC SYMBOLS AT RESTROOMS WITH 1/4" GRAY PLASTIC LAMINATE WITH POUSHED EDGES a/KTYM 2s><IV1E1 HIP crrliMrile0 -7f-r-tAg-ritAjP 212A5P, ffhle-41f-161 ot MOUNT WITH DOUBLE, FLOOR BACK TAPE I.C.C. 404 DOORS AND DOORWAYS; 3/4" HIGH WHITE TACTILE LETTERS W/ BRAILLE CHARACTERS 404,1 GENERAL, DOORS AND DOORWAYS THAT ARE PART OF AN ACCESSIBLE ROUTE SHALL COMPLY WITH SECTION 404. 404.2 MANUAL DOORS, MANUAL DOORS AND DOORWAYS AND MANUAL GATES, INCLUDING TICKET GATES, SHALL COMPLY WITH THE REQUIREMENTS OF SECTION 404.2 404.2,1 DOUBLE-LEAF DOORS AND GATES, AT LEAST ONE OF THE ACTIVE LEAVES OF DOORWAYS WITH TWO LEAVES SHALL COMPLY WITH SECTIONS 404.2.2 AND 404.2.3 404.2.2„ CLEAR WIDTH, DOORWAYS SHALL HAVE A CLEAR OPENING WIDTH OF 32 INCHES MIN. CLEAR OPENING WIDTH OF DOORWAYS WITH SWINGING DOORS SHALL BE MEASURED BETWEEN THE FACE OF TEH DOOR AND STOP, WITH THE DOOR OPEN 90 DEGREES. OPENINGS, DOORS AND DOORWAYS WITHOUT DOORS MORE THAN 24 INCHES IN DELTH SHALL PROVIDE A CLEAR OPENING WIDTH OF 36 INCHES MIN. THERE SHALL BE NO PROJECTIONS INTO THE CLEAR OPENING WIDTH LOWER THAN 34 INCHES ABOVE THE FLOOR. PROJECTIONS INTO THE CLEAR OPENING WIDTH BETWEEN 34 INCHES AND 80 INCHES ABOVE THE FLOOR SHALL NOT EXCEED 4 INCHES. EXCEPTIONS. 1. DOOR. CLOSERS AND DOOR STOPS SHALL BE PERMITTED TO BE 78 INCHES MIN. ABOVE THE FLOOR 2. IN ALTERATIONS. A PROJECTION OF 5/8 INCH MAX. INTO THE REQUIRED CLEAR OPENING WIDTH SHALL. BE PERMITTED FOR THE LATCH SIDE STOP. 404.2.15 FLOOR SURFACE, FLOOR SURFACE WITHIN THE MANEUVERING CLEARANCES SHALL HAVE A SLOPE NOT STEEPER THAN 1:48 AND SHALL COMPLY WITH SECTION 302 404.2.4 THRESHOLDS AT DOORWAYS; IF PROVIDED. THRESHOLD AR DOORWAYS SHALL BE 1/2 INCH MAX. IN HEIGHT. RAISED THRESHOLDS AND CHANGES IN LEVEL AT DOORWAYS SHALL COMPLY WITH SECTIONS 302 AND 303. 703.5.1 GENERAL. SYMBOLS OF ACCESSIBILITY SHALL COMPLY WITH SECTION 703.6 703.6.2 FINISH AND CONTRAST. SYMBOLS OF ACCESSIBILITYAND THEIR FIELDS SHALL HAVE A NON GLARE FINISH. SYMBOLS OF ACCESSIBILITY SHALL CONTRAST WITH THIER FIELDS, WITH EITHER A LIGHT SYMBSOL ON A DARK FIELD OR A DARK SYMBOL ON A LIGHT FIELD. MEN DETAIL REVIEWED CODE COMPLIANCE APPROVED OCT 09 2009 City of Tukwila BUILDING DIVISION RECEIVED CITY OF TUKVVILA SEP 2 4 2009 PERMIT CENTER • F URNI T URE AND EQUIPMENT LEGEND # ITEM MANUFACTURER ORDERED FROM QTY DESCRIPTION CUSTOMER AREA 4A 30" X 42" TABLE PLYMOLD DAI 1 12 2 30" HIGH W/ (1) VERTICAL TABLE LEG AT EACH OF THE 4 CORNERS. FONT HILL PEAR LAMINATE WITH BLACK DURA EDGE. 30" HIGH W/ FREESTANDING 22 X 22 CROSS BASE. FONT HILL PEAR LAMINATE WITH BLACK DURA EDGE. 42" HIGH W/ FREESTANDING 30" X 30" CROSS BASE. FONT HILL PEAR LAMINATE WITH BLACK DURA EDGE. QUEST CHAIR W/ UPHOLSTERED SEAT OR DUR -A -SEAT TO BE ORDERED IN THE FOLLOWING COLORS: CROCUS, SPICE AND SLATE. FRAME COLOR IS BLACK WRINKLE. QUEST STOOL W/ UPHOLSTERED SEAT OR DUR -A -SEAT TO BE ORDERED IN THE FOLLOWING COLORS: CROCUS, SPICE AND SLATE. FRAME COLOR IS BLACK WRINKLE. 4B 20" X 24" TABLE PLYMOLD DAI 5A 30" ROUND BAR HEIGHT TABLE PLYMOLD DAI 6A CHAIR PLYMOLD DAI 28 6 6B BAR HEIGHT STOOL PLYMOLD DAI . 8A TRASH RECEPTACLE PLYMOLD DAI 1 1 (X )25" X 25" SINGLE HOLE TRASH UNIT OR ( )18 5/8" X 18 5/8" SPACE SAVER TRASH UNIT. BLACK DURA EDGE TRASH RECEPTICLE W /FONT HILL PEAR LAMINATE FINISH. DEDICATED 115V, 20 AMP DUPLEX OUTLET (NEMA 5 -20R) W /IN 3 FEET, 3 INCH OR LARGER FLOOR DRAIN W /IN 3 FEET (EQUIPMENT INSTALLED BY COKE). 9A SODA FOUNTAIN CORNELIUS DAI 9B 10 TEA /COFFEE BREWER BUNN- O -MATCC CORP, DAI DEDICATED 120V, 15 AMP DUPLEX OUTLET (NEMA 5 -15P) W /IN 3 FEET. PLUMBING: 20 -90 PSI.. MODEL SUPPLIED WITH 1/4" MALE FLARE FITTING. MIN. 1GPM WATER FLOW. BEVERAGE DESTINATION CENTER DUKE MANUFACTURING DAI DAI /G.C. ( )RH ( X )LH BEVERAGE PLACEMENT ( )48" ( )60" ( X )72" ( )84" ( )96" ( )108" ( )120 ". STAINLESS STEEL TOP. FONT HILL PEAR LAMINATE FINISH. INSTALLED BY G.C. SEE MANUFACTURER FOR SPECS. 120V. INSTALLED BY G.C. 11 SUBWAY 'OPEN" WINDOW SIGN MYSTIGLO 13B WALL ART - SQUARE SUNGLO FABRICS DAI 3 1 1 26" X 26" WALL HUNG PRINT(2) COLOR PHOTOS DOUBLE MATTED IN A BLACK WOODEN FRAME. MOUNTING HARDWARE INCLUDED. EIGHT DIFFERENT PRINT IMAGES AVAILABLE. ( X)44 "W X 16 3/8 "D X 68 "H ( )44 "W X 16 3/8 "D X 54 "H ( )33 1/4 "W X 16 3/8 "D X 68 "H FLOOR RACKS. / ( )24 "W X 12 "D X 22 "H ( )36 "W X 12 "D X 22 "H COUNTERTOP RACKS. THROUGH LOCAL DIST. (X )1 DOOR FLOOR MODEL ( )2 DOOR FLOOR MODEL. DEDICATED 115V, 15 AMP DUPLEX OUTLET (NEMA 5 -15R) W /IN 6 FEET. 14 CHIP RACK FRITO -LAY DAI 15 DISPLAY REFRIGERATOR TRUE DAI 17 INTERIOR DOOR LOCAL G.C. 4 SOLID CORE HARDWOOD DOOR (SLAB OR PANEL CONSTRUCTION) STAIN MINWAX #235 CHERRY & POLYURETHANE W/ MINWAX FAST DRYING SATIN. METAL FRAME (PAINT SHERWIN WWAMS #SW6356 COPPER MOUNTAIN) LEVER HANDLE. INSTALLED BY GC. SERVICE AREA 19 FRONT COUNTER DUKE MANUFACTURING DAI 1 TOTAL LENGTH 17' -2" . (X -( )RH FOODYUNIT (2) 60, PAN UNIT. UNIT. AHOT FOOD EXTENSION N/A CASH EXTENSION BEVERAGE EXTENSION. _25...":1'H _COLD _6LCASH INSTALLED BY G.C. ULS APPROVED. ELECTRICAL CONNECTIONS AND WIRING TO LOCAL AND STATE CODE REQUIREMENTS AS DETERMINED BY G.C. OR ELECTRICIAN. 21 COOKIE DISPLAY CASE ADVANCED DISPLAYS IN PLASTICS, INC DAI 1 DISPLAY CASE ON TOP OF SUB -WRAP AND NAPKIN RISER. MADE OF CLEAR ACRYLIC. 23 SAFE C.S.S. /TIDEL DAI 1 ( )TIME LOCK ( X )QUICK DROP ( )TIDEL TACC. INSTALLED BY G.C. IN SERVICE AREA. 24 SUBSHOP 2000 P.O.S. MICROS SYSTEMS/DELL /SUBTOTALAIPC -POS DAI 1 PC BASED POINT OF SALE SYSTEM. REQUIRES DEDICATED POWER SOURCE WITH ISOLATED GROUND TO BREAKER. 25 MICROWAVE AMANA /SHARP DUKE MANUFACTURING / LOCAL DAI DAI /G.C. 1 1 *5 -20R OUTLET REQUIRED. 1200 WATT, 120V /60HZ /1PH, 20 AMP CIRCUIT. DEDICATED CIRCUIT REQUIRED. WALL MOUNTED, 10" X 14" X 6 ", OR SEE OWNER FOR SPECS. SUBJECT TO HEALTH CODE APPROVAL. 26 HAND SINK 27 BREAD OVENI DUKE /NU -VU DAI 1 1 ( )DUKE ( X )NU -VU. DEDICATED CIRCUIT REQUIRED. DIRECT WIRED. INSTALLED BY G.C. *1/4" WATERLINE IS REQUIRED. (X )RH ( )LH COMBINATION CABINET. INTEGRATED OPEN AIR COOLING RACK ABOVE WITH ENCLOSED CABINET BELOW. INSTALLED BY G.C. 28A COMBI:BREAD LOCKWOOD DAI 29 MENUBOARD VGS / TRANSLITE SONOMA PLYMOLD /DUKE MFG. DAI DAI 4 1 MENUBOARD: ( 4 )2 X 4' ( )2' X 2'. LIGHT FIXTURES: ( )2' ( )4' ( )8' ( 1 )16' MOUNT TO TOP OF MENUBOARD. SINGLE OUTLET REQUIRED. INSTALLED BY G.C. SELF - CLOSING, PREFRAMED & PREFINISHED OR SEE BACK -UP SHEETS FOR CONSTRUCTION SPECS. FONT HILL PEAR LAMINATE FINISH. INSTALLED BY G.C. 30 COUNTER ENTRANCE 33 REFRIGERATED BACK COUNTER DUKE MANUFACTURING DAI 1 ( )48" LENGTH. ( X )60" LENGTH. BACK COUNTER . WITH UNDER - COUNTER REFRIGERATOR. STAINLESS STEEL TOP. FONT HILL PEAR LAMINATE FINISH. INSTALLED BY G.C. 34, RAPID-GOOK-OVEN TURBOCHEF /MERRYCHEF DAI 1 ( X )TURBOCHEF ( )MERRYCHEF MICROWAVE /CONVECTION OVEN. REFER TO TUSCANY II BACK -UP SHEET #4 FOR FURTHER SPECIFICATIONS. BACKROOM AREA 36 SINK DUKE MANUFACTURING DAI 1 1 ( 3 )COMPARTMENT(S) (2 )DRAINBOARD(S). ( X )18" ( )24" DRAINBOARD SIZE. INSTALLED BY G.C. ULS APPROVED. FLOOR LEVEL SINK, 2' X 2' (PREFERRED). ACQUIRE LOCALLY. INSTALLED BY G.C. ACQUIRE LOCALLY. INSTALLED BY G.C. 37 MOP SINK LOCALLY SOURCED G.C. 38 HOT WATER TANK LOCALLY SOURCED G.C. 1 39 S.S. WORKTABLE DUKE MANUFACTURING DAI 1 ( )24" ( )36" ( )48" ( X )60" ( )72" ( )84" ( )96" ( )108" ( )120" X 30". ( X )W/ GALVANIZED UNDERSHELF ( )WITHOUT UNDERSHELF. 40 WALL SHELF INTER METRO DAI 3 SUPER ERECTA BRITE. EPDXY COATED, WALL MOUNTED SHELVES, AVAILABLE IN VARIOUS SIZES. INSTALLED BY G.C. 41 VEGETABLE SINK DUKE MANUFACTURING DAI DAI /G.C. DAI 1 1 1 ( 1 )COMPARTMENT(S) ( 1 )DRAINBOARD(S). ( X )18" : ( )24" DRAINBOARD SIZE. INSTALLED BY G.C. ULS APPROVED. WALL MOUNTED, 10" X 14" X 6 ", OR SEE OWNER FOR SPECS. SUBJECT TO HEALTH CODE APPROVAL. DISPENSING STATION FOR CLEANING PRODUCTS. 42 HAND SINK DUKE MANUFACTURING / LOCAL SSDC 43 CLEANING PRODUCT RACK 45 NEMCO EASY - SLICER NEMCO, INC. DAI 1 MANUAL SLICER MOUNTED ON STAINLESS STEEL TABLE TOP. NSF APPROVED. 46 RETARDER CABINET ' LOCKWOOD DAI 1 1 ( X )WALK -IN (REACH -IN . NSF APPROVED. ( )8' X 6' ( )6' X 8' ( X )6' X 6' ( )5' X 6' ( )4' X 6' ( )3 DOOR ( )2 DOOR ( )1 DOOR ( )OTHER______ SELF - EVAPORATING. DIRECT WIRED. INSTALLED BY G.C. NSF APPROVED. 47 REFRIGERATOR NORLAKE DAI 48 FREEZER NORLAKE DAI 1 ( )8' X 6' ( )6' X 8' ( X )6' X 6' ( )5' X 6' ( )4' X 6' ( )3 DOOR ( )2 DOOR ( )1 DOOR ( )OTHER____ SELF - EVAPORATING. DIRECT WIRED. INSTALLED BY G.C. NSF APPROVED. ( 1 )18" X 60" (_2_)18" X 72 ". SUPER ERECTA BRITE. 49 50 51 STORAGE UNITS INTER, METRO DAI re) •—• � SODA STORAGE COKE DAI DEDICATED 115V, 20 AMP DUPLEX OUTLET (NEMA 5 -20R) W /IN 3 FEET OF BIB RACK, 96 INCHES HIGH /WATER 1/2 INCH BALL VALVE SHUTOFF W /IN 3 FEET OF BIB RACK, 96 INCHES HIGH (EQUIPMENT INSTALLED BY COKE). RECEIVER AND AMPLIFIER WITH THREE SPEAKERS MOUNTED AND PROFESSIONALLY WIRED IN CEILING. OPTIONAL SUBWAY® RADIO SERVICE. STEREO SYSTEM SUBWAY® RADIO /LOCAL DAI /LOCAL 1 F.L O OR FINISH LEGEND- TUSCANY II DECOR (RANDOM PATTERN) TILE I NO. AREA OF STORE MANUFACTURER SUPPLIER INST. SQ /FT DESCRIPTION I� �` // CUSTOMER AREA CROSSVILLE G G.C. 585 COLORBLOX STONE SERIES; 12" X 12 A1156 WHEAT COLORBLOX STONE SERIES; 12" X 12" A1154 GREEN COLORBLOX STONE SERIES; 12" X 12" A1153 CLAY WHEN INSTALLING THE RANDOM PATTERN, THE PERCENTAGES OF THE ABOVE COLORS ARE AS FOLLOWS: WHEAT - 80 %; GREEN - 12 %; CLAY - 8 %. (THE GREEN' AND CLAY SHOULD BE DISTRIBUTED EVENLY, BUT RANDOMLY THROUGHOUT AS NOT TO REPRESENT A NOTICEABLE PATTERN) USE DARK GREY OR DARK BROWN GROUT THROUGHOUT ENTIRE CUSTOMER AREA PUBLIC ACCESSIBLE RESTROOM CROSSVILLE G G.C. 85 COLORBLOX STONE SERIES; 12" X 12" A1156 WHEAT WITH DARK GREY OR DARK BROWN GROUT. O BACKROOM SERVICE / AREA CROSSVILLE G.C. G.C. 435 OPTION #1: COLORBLOX STONE SERIES; 12" X 12" A1156 WHEAT WITH DARK GREY OR DARK BROWN GROUT. OPTION #2: 51830 COLOR: COTTAGE TAN 12" X 12" VINYL COMPOSITE TILE CONTINUED THROUGHOUT THE BACKROOM. ARMSTRONG G.C. G.C. WALL BASE NOTE: WALL BASE OPTION MUST MATCH FLOOR OPTION LISTED ABOVE IN ALL AREAS OF STORE ALL AREAS CROSSVILLE G.C. G.C. 6" X 12" COVE BASE OR 4" X 12" BULLNOSE: COLORBLOX STONE SERIES A1156 WHEAT WITH DARK GREY OR DARK BROWN GROUT. SERVICE / BACKROOM AREA ARMSTRONG G.C. G.C. 6" BLACK VINYL COVE BASE. (USED WITH VINYL COMPOSITE FLOOR TILE ONLY ( ONLY) ADDITIONAL COMMENTS: 1.) FLOORING CONTRACTOR IS RESPONSIBLE FOR OWN DETERMINATIONS ON SUBFLOOR REQUIREMENTS AND TO INSTALL IN ACCORDANCE WITH CODE REQUIREMENTS AND TO INDUSTRY AND MANUFACTURER SPECIFICATIONS. 2.) THE SQUARE FOOTAGE CALCULATIONS OF THE FLOORING MUST BE VERIFIED BY THE G.C. AND FRANCHISE OWNER. SUBWAY STORE DESIGN DEPARTMENT WILL NOT ACCEPT RESPONSIBILITY FOR ANY INACCURACIES. 3.) BULLNOSE WALL BASE IS TO BE INSTALLED ON TOP OF THE TUSCAN STUCCO WALL COVERING. 1 " -3" OF TUSCAN STUCCO WALL COVERING IS RECOMMENDED TO BE COVERED TO PROVIDE A TIGHT FIT. .. Ill FLOOR TILE KEY iiiiii COLORBLOX SERIES; 12" X 12" A1156 WHEAT L 1' I COLORBLOX SERIES; 12 " X 12" A1154 GREEN I — rrlsx'; :.str::>�r 12" 12" COLORBLOX SERIES; 12 X 12 A1153 CLAY I iiiiii I 11 I RANDOM FLOOR TILE PLACEMENT EXAMPLE DATE: AUGUST 7, 2009 DESIGNED BY: PHILL DEL (DICE DRAWN BY: PMD R V I EW Y: SCALE: =1' -0" HEADERWALL ®6' -8" A.F.F. PLUMBING VOT PERMITED IN THIS AREA 42' 42" 20" PLUMBING NOT PERMITED IN THIS AREA PHONE JACK B ANELS - 8" A.F.F. MODEM LINE REQUIRED) / / rc% /123 9 A +F DIRECT WIRED 42" 60" I CE ON TOP i 26 IIIIIIIIIIIIIIIIIIIIIIIIIIIIf = == III 11111111/%1%1111111111111==== IIIIIIIIIIIII. IIIIIIIIIIIII =c== 11111111111111I111111111111111 - - -- Ima MINIMS MN INE - .MOM MEV awl MI MN MID= NO MIN 1•11111M RH MI NM MO= MIMS IMMO OM= IINWIIMIIM WI WM MM. MI MO 1MM =I MI im• NM MID NM =I WI IOW NM= WI NMI 5 1 1 20# 33 = = === LOCKERS OR OTHER SUITABLE FACILITIES SHALL BE PROVIDED FOR THE ORDERLY STORAGE OF EMPLOYEES' CLOTHING AND OTHER POSSESSIONS. ABOVE u u 96 ABO #34 RH TYP. intkuV►t SPAI 0 ,0 DIRECtWIR �1 �a 9 48" HIGH WALL 4 AND DOOR 30 "X48" CLEAR SPACE REQUIRE() 36" HIGH WALL \ NO CHANGES SHALL BE MADE WITHOUT HEALTH DEPARTMENT APPROVAL PLUMBING NOT PERMITED IN THIS AREA ri] 0 ADDITIONAL STORAGE Tr- 0 It is strongly recommended that hot water for the restroom hand wash sinks be plumbed from the main hot water heater ...instead of using an instant war'M type water heater unit under each sink. l kgOesS4 1%kr4S jjlV 1 - •W• &i5)-tArte 1 L StihA' A2,o 7ol1T7Yp r -axgriN AS,o /Fa p/7-( APPROVED SUBJECT TO ORDINANCE D e E By SEP 08 Mg DIAi E A ASID x 1,713 5g,1i22b7O ate_ Iessk" DRAINBOARDS, UTENSIL RACKS, OR TABLES LARGE ENOUGH TO ACCOMMODATE ALL SOILED AND CLEANED ITEMS SHALL BE PROVIDED FOR NECESSARY UTENSIL HOLDING ...BEFORE CLEANING AND AFTER SANITIZING. WAREWASHING /DISHWASHING SINK COMPARTMENTS SHALL BE LARGE ENOUGH TO ACCOMMODATE IMMERSION OF THE LARGEST EQUIPMENT AND UTENSILS. HOT WATER GENERATION AND DISTRIBUTION SYSTEMS SHALL BE SUFFICIENT TO MEET THE PEAK HOT WATER DEMANDS THROUGHOUT THE FOOD ESTABLISHMENT. PLUMBING SYSTEMS SHALL BE DESIGNED, CONSTRUCTED AND INSTALLED ACCORDING TO LAW (APPLICABLE LOCAL, STATE, AND FEDERAL STATUES, REGULATIONS AND ORDINANCES) RESTROOM & KITCHEN HAND WASH SINKS SHALL BE EQUIPPED TO PROVIDE WATER AT A TEMPERATURE OF AT LEAST 100 DEGREES FAHRENHEIT THROUGH A MIXING VALVE OR COMBINATION FAUCET. SELF CLOSING OR METERING FAUCETS SHALL PROVIDE A FLOW OF WATER FOR AT LEAST 15 SECONDS. -KING CO blIc Health BE ADVISED THAT THE NEW WASHINGTON STATE FOOD CODE REQUIRES COMMERCIAL REFRIGERATION TO HOLD FOOD AT 41 DEGREES FAHRENHEIT OR BELOW II! (DOWN FROM 45 DEGREES) Food equipment that is certified for sanitation by an American National Standards Institute (ANSI) - accredited certification program will comply with the food code equipment & utensil material, construction and design requirements. FOOD SERVICE OPERATION AREA FLOORS, FLOOR COVERINGS, WALLS, WALL I COVERINGS, AND CEILINGS SHALL BE I DESIGNED, CONSTRUCTED AND INSTALLED SO THEY ARE SMOOTH, DURABLE AND ! EASILY CLEANABLE. FOOD, OOD PREPARATION AND FOOD i , SERVICE EQUIPMENT STORAGE AREAS ARE PROHIBITED UNDER SEWER LINES THAT ARE NOT SHIELDED TO INTERCEPT POTENTIAL DRIPS. i . . _ . . _ . . _ . . A PREOPERATIONAL THE KING COUNTY HEALTH DEPARTMENT IS REQUIRED PRIOR TO OPERATION. APPLICANT PLAN SET IS REQUIRED TO BE AVAILABLE ON SITE DURING THAT INSPECTION. O O 0 • J 0 6' -1 0" 17' -2 x 0 „ 24' -6" 17' 1" 7' 6' -10" or-2' 1" REVIEWED FOR CODE COMPLIANCE OP OVED nrr 0 9 2009 City of Tukwila I LUI DIVISION 5' NEW LOCATION GENERAL NOTES: X oD i0 cirr oFeiufi LA SEP 2 4 2009 PERMIT CENTER voot -200 - CEILING HEIGHT IS 10' -0" - ELECTRICAL OUTLET HEIGHTS MEASURED TO BOTTOM OF BOX. - ONE ELECTRICAL JUNCTION BOX TO BE LOCATED IN CEILING ABOVE EACH WINDOW. - CUNO MODEL SW3 -PLUS WATER FILTRATION SYSTEM IS. REQUIRED IN ALL NEW STORES THAT DISPENSE BEVERAGES. THE RECOMMENDED PLACEMENT FOR INSTALLATION IS MOUNTED TO SODA SYRUP RACK BY COCA -COLA. SECONDARY PLACEMENT OPTION IS MOUNTED ON THE BACKROOM WALL. THIRD INSTALLATION OPTION IS MOUNTING INSIDE THE FRONT BEVERAGE COUNTER WHEN SPACE LIMITATIONS OCCUR. REQUIRED: 1/2" INCOMING WATER LINE FEED WITH 1/2" BALL VALVE SHUTOFF AND 1/2" FPT CONNECTION. MINIMUM 110 VOLT, 20 AMP ELECTRICAL SERVICE TO SUPPORT THE CARBONATOR AND WATER BOOSTER (MUST BE DEDICATED CIRCUIT). - SMARTCURVE STAND (MFR. DISPLAY -BOX) REQUIRED IN CUSTOMER AREA AT POINT OF ORDER (PREFERRED PLACEMENT). 21 3/4" X 13 1/8" BASE, 56" (WITHOUT HEADER) OVERALL HEIGHT. - BASKET STYLE SECONDARY CHIP RACK REQUIRED IN CUSTOMER AREA AT POINT OF ORDER (PREFERRED PLACEMENT). - EXIT LIGHTS INSTALLED BY G.C. PER LOCAL CODE. - EMERGENCY LIGHTS INSTALLED BY G.C. PER LOCAL CODE. - EXTINGUISHERS, SMOKE AND FIRE DETECTION SYSTEMS INSTALLED BY G.C. PER LOCAL CODE. - LABOR & MATERIAL SUPPLIED BY G.C. UNLESS OTHERWISE NOTED. - ALL DIMENSIONS TO BE VERIFIED BY G.C. ON SITE. - DECOR SPECIFICATIONS ARE TO BE SUBWAY'S "TUSCANY II" SCHEME. - FREEZER MUST BE ADEQUATELY VENTILATED, REFER TO MANUFACTURER FOR DETAILS. APPLICANT COPY STORE MUST BE CONSTRUCTED AS DESIGNED IN THESE FLOOR PLANS SUBJECT TO FEDERAL, STATE AND LOCAL LAWS. RECIPIENT IS RESPONSIBLE FOR ENSURING COMPLIANCE WITH ALL LAWS. IF MODIFICATIONS ARE NECESSARY, PLEASE CONTACT DAI'S STORE DESIGN DEPARTMENT FOR WRITTEN APPROVAL OF THE REQUIRED CHANGES. THIS DRAWING IS FURNISHED BY DOCTORS ASSOCIATES INC. ( "DAI ") D /B /A SUBWAY. RECIPIENT MUST DETERMINE IF THIS DRAWING MUST BE SUBMITTED TO A LICENSED ARCHITECT OR SIMILAR PROFESSIONAL UNDER FEDERAL, STATE OR LOCAL LAW. ANY CHANGES MUST BE APPROVED BY DAI. DO NOT SCALE DRAWING. WRITTEN DIMENSIONS TAKE PRECEDENCE OVER SCALED DIMENSIONS. AND SHALL BE VERIFIED IN THE FIELD BY THE GENERAL CONTRACTOR AND/OR FRANCHISEE/OWNER. ANY DISCREPANCY IN DIMENSIONS SHALL BE BROUGHT TO THE IMMEDIATE ATTENTION OF DAI'S AREA DEVELOPMENT AGENT OR DESIGNATED FIELD REPRESENTATIVE. THE GENERAL CONTRACTOR AND EACH SUB-CONTRACTOR SHALL MAKE HIS OWN INSPECTIONS AND MEASUREMENTS, DAI AND SUBWAY SHALL NOT BE HELD RESPONSIBLE FOR THE ACCURACY OF DIMENSIONS AND FOR ERRORS AND OMISSIONS IN THE DRAWINGS IF WRITTEN CONFIRMATION HAD NOT BEEN RECEIVED BY DAPS STORE DESIGN DEPARTMENT. THIS DRAWING AND THE INFORMATIONAL CONTENT HERE OF IS THE CONFIDENTIAL PROPERTY DAI OF AND IS PROVIDED SOLELY FOR THE USE OF AUTHORIZED FRANCHISEES, THEIR AGENTS AND CONTRACTORS. RECIPIENT AGREES NOT TO REPRODUCE, COPY, USE OR TRANSMIT THIS DRAWING AND/OR ITS INFORMATIONAL CONTENT, IN WHOLE OR IN PART, OR TO ALLOW SUCH ACTION BY OTHERS, FOR ANY PURPOSE, EXCEPT WITH THE WRITTEN PERMISSION OF DAI ACTING FOR SUBWAY. RECIPIENT FURTHER AGREES TO SURRENDER THIS DRAWING AND ANY PERMITTED COPIES HEREOF UPON DEMAND. ©2008 DOCTORS ASSOCIATES, INC. l o t o r i4) SHEET #: 1 of 2 WORLD HEADQUARTERS STORE #38845 7100 FUN CENTER WAY DEVELOPMENT AGENT: MILFORD, CT 06461 (203) 877-4281 (800) 888-484 325 BIC DRIVE FLOOR FINISH LEGEND-- TUSCANY II DECOR (RANDOM PATTERN) TILE NO. AREA OF . STORE MANUFACTURER SUPPLIER INST. SQ /FT DESCRIPTION ,� `J CUSTOMER CROSSVILLE G.C. G.C. 5a COLORBLOX STONE. SERIES; 12" X 12" A1156 WHEAT COLORBLOX STONE SERIES; 12" X 12" A1154 GREEN COLORBLOX STONE SERIES; 12" X 12" A1153 CLAY WHEN INSTALLING THE RANDOM PATTERN, THE PERCENTAGES OF THE ABOVE COLORS ARE AS FOLLOWS: WHEAT — 80 %;. GREEN - 12 %; CLAY - 8 %. (THE GREEN AND CLAY SHOULD BE EVENLY, BUT RANDOMLY THROUGHOUT AS NOT TO REPRESENT A NOTICEABLE PATTERN) USE DARK GREY OR DARK BROWN GROUT THROUGHOUT ENTIRE CUSTOMER AREA O PUBLIC ACCESSIBLE RESTROOM . CROSSVILLE G.C. G.C. $5 COLORBLOX STONE SERIES; 12" X 12" A1156 WHEAT WITH DARK GREY OR DARK BROWN GROUT. O SERVICE / BACKROOM AREA CROSSVILLE G.C. G.C. 435 OPTION #1: COLORBLOX STONE SERIES; 12" X 12" A1156 WHEAT WITH DARK GREY OR DARK BROWN GROUT. OPTION #2: 51830 COLOR: COTTAGE TAN 12" X 12" VINYL COMPOSITE TILE CONTINUED :THROUGHOUT THE BACKROOM. ARMSTRONG G.C. G.C. WALL BASE NOTE: WALL BASE OPTION MUST MATCH FLOOR OPTION LISTED ABOVE IN ALL AREAS OF STORE ALL AREAS . CROSSVILLE G.C. G C. 8A 9A 9B 10 11 138 6" X 12" COVE BASE OR 4" X 12" BULLNOSE: COLORBLOX STONE SERIES A1156 WHEAT WITH DARK GREY OR DARK BROWN GROUT. 6" BLACK VINYL COVE BASE. (USED WITH VINYL COMPOSITE FLOOR TILE ONLY) AREA SERVICE /BACKROOM ARMSTRONG G.C. G.C. ADDITIONAL COMMENTS: 1.) FLOORING CONTRACTOR IS RESPONSIBLE FOR OWN DETERMINATIONS ON SUBFLOOR REQUIREMENTS AND TO INSTALL IN ACCORDANCE WITH CODE REQUIREMENTS AND TO INDUSTRY AND MANUFACTURER SPECIFICATIONS. 2.) THE SQUARE FOOTAGE CALCULATIONS OF THE FLOORING MUST BE VERIFIED BY THE G.C. . AND FRANCHISE OWNER. SUBWAY STORE DESIGN DEPARTMENT WILL NOT ACCEPT RESPONSIBILITY FOR ANY INACCURACIES. 3.) BULLNOSE WALL BASE IS TO BE INSTALLED ON TOP OF THE TUSCAN STUCCO WALL COVERING. 1 " -3" OF TUSCAN STUCCO WALL COVERING IS RECOMMENDED TO BE COVERED:. TO PROVIDE A TIGHT FIT. 14 15 17 CHIP RACK DISPLAY 'REFRIGERATOR INTERIOR DOOR FRITO -LAY TRUE LOCAL iiiiii 1 ..1 1 4 X 44 "W .X 16 3 8 "D X 68 1H 44 "W X 16 3/8 "D X 54 "H ( )33 1/4 "W X 16 3/8 "D X 68 "H FLOOR RACKS. / ( )24 "W X 12 "D X 22 "H ( )36 "W X 12 "D X 22 "H COUNTERTOP RACKS. THROUGH LOCAL DIST. X 1 DOOR FLOOR MODEL 2 DOOR FLOOR MODEL. DEDICATED 115V, 15 AMP DUPLEX OUTLET NEMA 5 -15R W IN 6 FEET. SOLID CORE HARDWOOD DOOR SLAB OR PANEL CONSTRUCTION STAIN MINWAX 235 CHERRY & POLYURETHANE W MINWAX FAST DRYING SATIN. METAL FRAME PAINT SHERWIN WIWAMS SW6356 COPPER MOUNTAIN LEVER HANDLE. INSTALLED BY GC. SERVICE AREA 19. FRONT COUNTER DUKE MANUFACTURING DAI 1 CASH UNIT. . .NJ OT FOOD EXTENSION N/A CASH EXTENSION J. A BEVERAGE EXTENSION. TOTAL LENGTH 17' -2" (�X• )LE •r( )RH " "HOT - "FOOD UNIT ('?) 60_COLD PAN U.NIT. _6L .H . . INSTALLED BY G.C. ULS APPROVED. ELECTRICAL CONNECTIONS AND WIRING TO 'LOCAL AND STATE CODE REQUIREMENTS AS DETERMINED BY G.C. OR ELECTRICIAN. FLOOR TILE KEY COOKIE DISPLAY CASE ADVANCED DISPLAYS IN PLASTICS, INC DAI 1 DISPLAY CASE ON TOP OF SUB -WRAP AND NAPKIN RISER. MADE OF CLEAR ACRYLIC. iiiiii SAFE C.S.S. /TIDEL DAI 1 ( )TIME LOCK ( X )QUICK DROP ( )TIDEL TACC. INSTALLED BY G.C. IN SERVICE AREA. 24 SUBSHOP 2000 P.O.S. _ E COLORBLOX SERIES; 12" X 12" A1156 WHEAT 1 . PC BASED POINT OF SALE SYSTEM. REQUIRES DEDICATED POWER SOURCE WITH ISOLATED GROUND TO BREAKER. 25 MICROWAVE AMANA /SHARP . DAI . 1 *5 -20R OUTLET REQUIRED. 1200 WATT, 120V /60HZ /1PH, 20 AMP CIRCUIT. DEDICATED CIRCUIT. REQUIRED. 26 I DUKE MANUFACTURING / LOCAL DAI /G.C. 1. WALL MOUNTED, 10" X 14" X 6 ", OR SEE OWNER FOR SPECS. SUBJECT TO HEALTH CODE APPROVAL. 27 BREAD3OVEN I' DAI 1 ( )DUKE ( X )NU -VU. DEDICATED CIRCUIT REQUIRED. DIRECT WIRED. INSTALLED BY G.C. *1/4 WATERLINE IS REQUIRED. 28A COMBI=BREAD,:,CABINET LOCKWOOD DAI 1 X )RH ( )LH COMBINATION CABINET. INTEGRATED OPEN AIR COOLING RACK ABOVE WITH ENCLOSED CABINET BELOW. INSTALLED BY G.C. . 29 MENUBOARD COLORBLOX SERIES; 12" X 12" A1154 GREEN DAI 4 MENUBOARD: ( 4 )2' X 4' ( )2' X 2'. LIGHT FIXTURES: ( )2' ( )4' ( )8' ( 1 )16' MOUNT TO TOP: OF MENUBOARD. SINGLE OUTLET REQUIRED. INSTALLED BY G.C. 30 COUNTER ENTRANCE PLYMOLD /DUKE MFG. DAI 1 SELF- CLOSING, PREFRAMED & PREFINISHED OR SEE BACK -UP SHEETS FOR CONSTRUCTION SPECS. FONT HILL PEAR LAMINATE FINISH. INSTALLED BY G.C. 33 34, REFRIGERATED BACK COUNTER RAPID- COOK -OVEN DUKE MANUFACTURING TURBOCHEF /MERRYCHEF DAI DAI 1 1 48" LENGTH. X 60" LENGTH. BACK COUNTER.. WITH UNDER - COUNTER REFRIGERATOR. STAINLESS STEEL TOP. FONT HILL PEAR LAMINATE FINISH. INSTALLED BY G.C. ( X )TURBOCHEF ( )MERRYCHEF MICROWAVE /CONVECTION OVEN. REFER TO TUSCANY II BACK -UP SHEET #4 FOR FURTHER SPECIFICATIONS, Ix: "• r BR r COLORBLOX SERIES; 12" X 12" A1153 CLAY BACKROOM AREA 36 SINK I l DAI 1 ( 3 )COMPARTMENT(S) (2 )DRAINBOARD(S). ( X )18" ( )24" DRAINBOARD SIZE. INSTALLED BY G.C. ULS APPROVED. 37 MOP`. SINK - LOCALLY SOURCED G.C. 1 . FLOOR LEVEL SINK. 2' X 2' (PREFERRED). ACQUIRE LOCALLY. INSTALLED BY G.C. 38 HOT WATER TANK LOCALLY SOURCED G.C. 1 . 39 Mill DUKE. MANUFACTURING DAI 1 ( )24" ( )36" ( )48" ( X )60" ( )72" ( )84" ( )96" ( )108" ( )120" X 30". ( X )W/ GALVANIZED UNDERSHELF ( )WITHOUT UNDERSHELF.. 40 WALL SHELF INTER METRO DAI 3 SUPER ERECTA BRITE. EPDXY COATED, WALL MOUNTED SHELVES, AVAILABLE IN VARIOUS SIZES. INSTALLED BY G.C. 41 VEGETABLE SINK DUKE MANUFACTURING DAI 1 ( 1 ) COMPARTMENT(S) ( 1) DRAINBOARD (S) ( X )18" )24" DRAINBOARD SIZE. INSTALLED BY G.C. ULS APPROVED. RANDOM FLOOR TILE PLACEMENT EXAMPLE HAND SINK DATE AUGUST 7, 2009 DESIGNED BY: PHILL DEL /DICE DRAWN BY: PMD R IEW Y: SCALE: , =1' -O" . F URNI T URE AND EQUIPMENT LEG END # ITEM MANUFACTURER O FROM D QTY DESCRIPTION CUSTOMER AREA 4A 30" X 42" TABLE PLYMOLD DAI 1 30" HIGH W 1 VERTICAL TABLE LEG AT EACH OF THE 4 CORNERS. FONT HILL PEAR LAMINATE WITH BLACK DURA EDGE. 4B 20" X 24" TABLE PLYMOLD DAI 12 30" HIGH W FREESTANDING 22" X 22" CROSS BASE. FONT HILL PEAR LAMINATE WITH BLACK DURA EDGE. 5A 30" ROUND BAR HEIGHT TABLE PLYMOLD DAI 2 42" HIGH W FREESTANDING 30" X 30" CROSS BASE. FONT HILL PEAR LAMINATE WITH BLACK DURA EDGE. 6A CHAIR PLYMOLD DAI 28 QUEST CHAIR W UPHOLSTERED SEAT OR DUR -A -SEAT TO BE ORDERED IN THE FOLLOWING COLORS: CROCUS, SPICE AND SLATE. FRAME COLOR IS BLACK WRINKLE. 6B BAR HEIGHT STOOL PLYMOLD DAI . 6 QUEST STOOL W UPHOLSTERED SEAT OR DUR -A -SEAT TO BE ORDERED IN THE FOLLOWING COLORS:. CROCUS, SPICE AND SLATE. FRAME COLOR IS BLACK WRINKLE. 8A 9A 9B 10 11 138 TRASH RECEPTACLE SODA FOUNTAIN TEA COFFEE BREWER BEVERAGE DESTINATION CENTER SUBWAY 'OPEN" WINDOW SIGN WALL ART- SQUARE PLYMOLD CORNELIUS BUNN- O -MATIC CORP. DUKE MANUFACTURING MYSTIGLO SUNGLO FABRICS DAI DAI DAI DAI DAI G.C. DAI X 25" X 25" SINGLE HOLE TRASH UNIT OR 18 5 8" X 18 5 8" SPACE SAVER TRASH UNIT. BLACK. DURA EDGE TRASH RECEPTICLE W /FONT HILL PEAR LAMINATE FINISH. DEDICATED 115V, 20 AMP DUPLEX OUTLET NEMA 5 -20R W IN 3 FEET, 3 INCH OR LARGER FLOOR DRAIN W /IN 3 FEET (EQUIPMENT INSTALLED BY COKE), DEDICATED 120V, 15 AMP DUPLEX OUTLET (NEMA 5 -15P) W /IN 3 FEET. PLUMBING: 20 -90 PSI, MODEL SUPPLIED WITH 1/4" MALE FLARE FITTING. MIN. 1GPM WATER FLOW. RH X LH BEVERAGE PLACEMENT 48" 60" X 72" 84" 96" 108" 120 ". STAINLESS STEEL TOP. FONT HILL PEAR LAMINATE FINISH, INSTALLED BY G.C. SEE MANUFACTURER FOR SPECS. 120V. INSTALLED BY G.C. S 26" 26" X 26 WALL HUNG PRINT S COLOR PHOTOS DOUBLE MATTED IN A BLACK WOODEN FRAME. MOUNTING HARDWARE INCLUDED. EIGHT DIFFERENT PRINT IMAGES AVAILABLE. 14 15 17 CHIP RACK DISPLAY 'REFRIGERATOR INTERIOR DOOR FRITO -LAY TRUE LOCAL DAI DAI G.C. ..1 1 4 X 44 "W .X 16 3 8 "D X 68 1H 44 "W X 16 3/8 "D X 54 "H ( )33 1/4 "W X 16 3/8 "D X 68 "H FLOOR RACKS. / ( )24 "W X 12 "D X 22 "H ( )36 "W X 12 "D X 22 "H COUNTERTOP RACKS. THROUGH LOCAL DIST. X 1 DOOR FLOOR MODEL 2 DOOR FLOOR MODEL. DEDICATED 115V, 15 AMP DUPLEX OUTLET NEMA 5 -15R W IN 6 FEET. SOLID CORE HARDWOOD DOOR SLAB OR PANEL CONSTRUCTION STAIN MINWAX 235 CHERRY & POLYURETHANE W MINWAX FAST DRYING SATIN. METAL FRAME PAINT SHERWIN WIWAMS SW6356 COPPER MOUNTAIN LEVER HANDLE. INSTALLED BY GC. SERVICE AREA 19. FRONT COUNTER DUKE MANUFACTURING DAI 1 CASH UNIT. . .NJ OT FOOD EXTENSION N/A CASH EXTENSION J. A BEVERAGE EXTENSION. TOTAL LENGTH 17' -2" (�X• )LE •r( )RH " "HOT - "FOOD UNIT ('?) 60_COLD PAN U.NIT. _6L .H . . INSTALLED BY G.C. ULS APPROVED. ELECTRICAL CONNECTIONS AND WIRING TO 'LOCAL AND STATE CODE REQUIREMENTS AS DETERMINED BY G.C. OR ELECTRICIAN. 21 COOKIE DISPLAY CASE ADVANCED DISPLAYS IN PLASTICS, INC DAI 1 DISPLAY CASE ON TOP OF SUB -WRAP AND NAPKIN RISER. MADE OF CLEAR ACRYLIC. 23 SAFE C.S.S. /TIDEL DAI 1 ( )TIME LOCK ( X )QUICK DROP ( )TIDEL TACC. INSTALLED BY G.C. IN SERVICE AREA. 24 SUBSHOP 2000 P.O.S. _ MICROS SYSIEMS/DE1L /SUBTOTALiPC -POS DAI 1 . PC BASED POINT OF SALE SYSTEM. REQUIRES DEDICATED POWER SOURCE WITH ISOLATED GROUND TO BREAKER. 25 MICROWAVE AMANA /SHARP . DAI . 1 *5 -20R OUTLET REQUIRED. 1200 WATT, 120V /60HZ /1PH, 20 AMP CIRCUIT. DEDICATED CIRCUIT. REQUIRED. 26 HAND SINK DUKE MANUFACTURING / LOCAL DAI /G.C. 1. WALL MOUNTED, 10" X 14" X 6 ", OR SEE OWNER FOR SPECS. SUBJECT TO HEALTH CODE APPROVAL. 27 BREAD3OVEN DUKE /NU -VU DAI 1 ( )DUKE ( X )NU -VU. DEDICATED CIRCUIT REQUIRED. DIRECT WIRED. INSTALLED BY G.C. *1/4 WATERLINE IS REQUIRED. 28A COMBI=BREAD,:,CABINET LOCKWOOD DAI 1 X )RH ( )LH COMBINATION CABINET. INTEGRATED OPEN AIR COOLING RACK ABOVE WITH ENCLOSED CABINET BELOW. INSTALLED BY G.C. . 29 MENUBOARD VGS / TRANSLITE SONOMA DAI 4 MENUBOARD: ( 4 )2' X 4' ( )2' X 2'. LIGHT FIXTURES: ( )2' ( )4' ( )8' ( 1 )16' MOUNT TO TOP: OF MENUBOARD. SINGLE OUTLET REQUIRED. INSTALLED BY G.C. 30 COUNTER ENTRANCE PLYMOLD /DUKE MFG. DAI 1 SELF- CLOSING, PREFRAMED & PREFINISHED OR SEE BACK -UP SHEETS FOR CONSTRUCTION SPECS. FONT HILL PEAR LAMINATE FINISH. INSTALLED BY G.C. 33 34, REFRIGERATED BACK COUNTER RAPID- COOK -OVEN DUKE MANUFACTURING TURBOCHEF /MERRYCHEF DAI DAI 1 1 48" LENGTH. X 60" LENGTH. BACK COUNTER.. WITH UNDER - COUNTER REFRIGERATOR. STAINLESS STEEL TOP. FONT HILL PEAR LAMINATE FINISH. INSTALLED BY G.C. ( X )TURBOCHEF ( )MERRYCHEF MICROWAVE /CONVECTION OVEN. REFER TO TUSCANY II BACK -UP SHEET #4 FOR FURTHER SPECIFICATIONS, BACKROOM AREA 36 SINK DUKE MANUFACTURING DAI 1 ( 3 )COMPARTMENT(S) (2 )DRAINBOARD(S). ( X )18" ( )24" DRAINBOARD SIZE. INSTALLED BY G.C. ULS APPROVED. 37 MOP`. SINK - LOCALLY SOURCED G.C. 1 . FLOOR LEVEL SINK. 2' X 2' (PREFERRED). ACQUIRE LOCALLY. INSTALLED BY G.C. 38 HOT WATER TANK LOCALLY SOURCED G.C. 1 ACQUIRE LOCALLY. INSTALLED BY G.C. . 39 S.S. WORKTABLE DUKE. MANUFACTURING DAI 1 ( )24" ( )36" ( )48" ( X )60" ( )72" ( )84" ( )96" ( )108" ( )120" X 30". ( X )W/ GALVANIZED UNDERSHELF ( )WITHOUT UNDERSHELF.. 40 WALL SHELF INTER METRO DAI 3 SUPER ERECTA BRITE. EPDXY COATED, WALL MOUNTED SHELVES, AVAILABLE IN VARIOUS SIZES. INSTALLED BY G.C. 41 VEGETABLE SINK DUKE MANUFACTURING DAI 1 ( 1 ) COMPARTMENT(S) ( 1) DRAINBOARD (S) ( X )18" )24" DRAINBOARD SIZE. INSTALLED BY G.C. ULS APPROVED. 42 HAND SINK DUKE MANUFACTURING / LOCAL DAI /G.C, 1 WALL MOUNTED, 10" X 14" X 6 ", OR SEE OWNER FOR SPECS. SUBJECT TO HEALTH CODE APPROVAL. 43 CLEANING PRODUCT RACK SSDC DAI 1 DISPENSING STATION FOR CLEANING PRODUCTS. . 45 NEMCO EASY - SLICER NEMCO, INC. DAI 1 MANUAL SLICER MOUNTED ON STAINLESS. STEEL TABLE TOP. NSF APPROVED. 46 RETARDER CABINET LOCKWOOD DAI 1 ( X )WALK -IN ( )REACH -IN . NSF APPROVED. 47 REFRIGERATOR NORLAKE DAI 1 ( )8' X 6' ( )6' X 8' ( X )6' X 6' ( )5' X 6' ( )4' X 6' ( )3 DOOR ( )2 DOOR ( )1 DOOR (. 'OTHER____- SELF - EVAPORATING. DIRECT WIRED. INSTALLED BY G.C. NSF APPROVED. 48 FREEZER' NORLAKE DAI 1 )8' X 6' ( )6' X 8' ( X )6' X 6' ( )5' X 6' ( )4' X 6' ( )3 DOOR ( )2 DOOR ( )1 DOOR .(. )OTHER__ - SELF - EVAPORATING. DIRECT WIRED. INSTALLED BY G.C. NSF APPROVED. ( ( 1 )18" X 60" ( 2 )18" X 72 ". SUPER ERECTA BRITE. 49 STORAGE UNITS INTER, METRO DAI 50 SODA STORAGE COKE , DAI DEDICATED 115V, 20 AMP DUPLEX OUTLET (NEMA 5 -20R) W /IN 3 FEET OF BIB RACK, 96 INCHES HIGH/WATER 1/2 INCH BALL VALVE SHUTOFF W /IN 3 FEET OF BIB RACK, 96 INCHES HIGH (EQUIPMENT INSTALLED BY COKE). RECEIVER AND AMPLIFIER WITH THREE SPEAKERS MOUNTED AND PROFESSIONALLY WIRED IN CEILING. OPTIONAL SUBWAY® RADIO SERVICE. 51 STEREO SYSTEM SUBWAY ®.;RADIO/LOCAL DAI /LOCAL 1 I 1 I \ / PLUMBING \ NOT PERMITED / \ IN THIS AREA // \ \. . . - -� LOCKERS OR OTHER SUITABLE FACILITIES SHALL BE PROVIDED FOR THE ORDERLY STORAGE OF EMPLOYEES' CLOTHING AND OTHER POSSESSIONS. NO CHANGES SHALL BE MADE WITHOUT HEALTH DEPARTMENT APPROVAL It is strongly recommended that hot water for the restroom hand wash sinks be plumbed from the main hot water heater :..instead of O using an instant warm type water heater unit ADDITIONAL under each sink. STORAGE HEADERWALL ®6' -8" A.F.F. PLUMBING VOT PERMITED IN. THIS AREA PHONE JACK DIRECT WIRED 11111111111111111111111111111 =�.: 111111111111M 11111111111115,==E __ 1111111111111W IIIIIIIIIIIII :,=.._ 11111111 111111111111111 — '�� MI NM IM1 V IM mag 101 NM 1■I Ma MIN =MOM • IMMO NORM MI NEMIN MINN NM MR )CE ON TOP DJRECLWIR 30 "X48 CLEAR SPACE REQUIRED 36" HIGH WALL PLUMBING NOT PERMITED IN THIS AREA kcr \ASV\ JINAniS wivi'r'S \f, ',`NG tkcniAb.a r s b E v' 'fit Schcs arc. Ie t wo., a fr ,t,,s . D By I I APPROVED SUBJECT TO ORDINANCE SEP 0 2E1 -KING CO bl)c Health DIA,N`EAUMTI r •'6 sg.. 1 t 2 2.4 - 7 0 DRAINBOARDS, UTENSIL RACKS, OR TABLES LARGE ENOUGH TO ACCOMMODATE ALL SOILED AND CLEANED `. ITEMS SHALL BE PROVIDED FOR NECESSARY UTENSIL HOLDING ...BEFORE CLEANING AND AFTER SANITIZING: WAREWASHING/DISHWASHING SINK COMPARTMENTS SHALL BE LARGE ENOUGH TO ACCOMMODATE IMMERSION OF THE LARGEST EQUIPMENT AND UTENSILS. HOT WATER GENERATION AND DISTRIBUTION SYSTEMS SHALL BE SUFFICIENT TO MEET THE PEAK HOT WATER DEMANDS THROUGHOUT THE FOOD ESTABLISHMENT. PLUMBING SYSTEMS SHALL BE DESIGNED, CONSTRUCTED AND INSTALLED ACCORDING TO LAW (APPLICABLE LOCAL, STATE, AND FEDERAL STATUES, REGULATIONS AND ORDINANCES) RESTROOM 6 KITCHEN HAND WASH SINKS SHALL BE EQUIPPED TO PROVIDE WATER AT A TEMPERATURE OF AT LEAST 100 DEGREES FAHRENHEIT THROUGH A MIXING VALVE OR COMBINATION FAUCET. SELF CLOSING OR METERING FAUCETS SHALL PROVIDE A FLOW OF WATER FOR AT LEAST 15 SECONDS. BE ADVISED THAT THE NEW WASHINGTON STATE FOOD CODE REQUIRES COMMERCIAL REFRIGERATION TO HOLD FOOD AT 41 DEGREES FAHRENHEIT OR BELOW !!! (DOWN FROM 45 DEGREES) FOOD SERVICE OPERATION AREA FLOORS, FLOOR COVERINGS, WALLS, WALL COVERINGS, AND CEILINGS SHALL BE DESIGNED, CONSTRUCTED AND INSTALLED SO THEY ARE SMOOTH, DURABLE AND EASILY CLEANABLE. FOOD, FOOD PREPARATION AND FOOD SERVICE EQUIPMENT STORAGE AREAS ARE PROHIBITED UNDER SEWER LINES THAT ARE NOT SHIELDED TO INTERCEPT POTENTIAL DRIPS. Food equipment that is certified for sanitation by an American National Standards Institute (ANSI) accredited certification program will comply with —' the food Code equipment & utensil material, construction and design requirements. 0 A PREOPERATIONAL THE KING COUNTY HEALTH DEPARTMENT IS REQUIRED PRIOR TO OPERATION. APPLICANT PLAN SET IS REQUIRED TO BE AVAILABLE ON SITE DURING THAT INSPECTION. 0 6' 10" 17' -2i" x 24' 6" 17' 1" 7' 6' -10" /L2' 1" REVIEWED FOR CODE COMPLIANCE APPROVED OCT 0 9 2009 City of Tukwila BUILDING DIVISION GENERAL NOTES: 5' NEW LOCATION o is o0 cn N RECEIVED CITY OF TUKWILA SEP 2 4 2009 PERMIT CENTER - CEILING HEIGHT IS 10' -0" - ELECTRICAL OUTLET HEIGHTS MEASURED TO BOTTOM OF BOX. - ONE ELECTRICAL JUNCTION BOX TO BE LOCATED IN CEILING ABOVE EACH WINDOW. - CUNO MODEL SW3 -PLUS . WATER FILTRATION SYSTEM IS. REQUIRED IN ALL NEW STORES THAT DISPENSE BEVERAGES. THE RECOMMENDED PLACEMENT FOR INSTALLATION IS MOUNTED TO SODA SYRUP RACK BY COCA -COLA. SECONDARY PLACEMENT OPTION IS MOUNTED ' ON THE BACKROOM WALL. THIRD INSTALLATION OPTION IS . MOUNTING INSIDE THE FRONT BEVERAGE COUNTER WHEN SPACE LIMITATIONS OCCUR. REQUIRED: 1/2" INCOMING WATER LINE FEED WITH 1/2" BALL VALVE SHUTOFF AND 1/2 FPT CONNECTION. MINIMUM 110 VOLT, 20 AMP ELECTRICAL SERVICE TO SUPPORT THE CARBONATOR AND WATER BOOSTER (MUST BE DEDICATED CIRCUIT). - SMARTCURVE STAND (MFR. DISPLAY -BOX) REQUIRED IN CUSTOMER AREA AT POINT OF ORDER (PREFERRED PLACEMENT). 21 3/4" X 13 1/8" BASE, 56 ". (WITHOUT HEADER) OVERALL HEIGHT. - BASKET STYLE SECONDARY CHIP RACK REQUIRED IN CUSTOMER AREA AT POINT OF ORDER (PREFERRED PLACEMENT). - EXIT LIGHTS INSTALLED BY G.C. PER LOCAL CODE. - EMERGENCY LIGHTS INSTALLED BY G.C. PER LOCAL CODE. - EXTINGUISHERS, SMOKE AND FIRE DETECTION SYSTEMS INSTALLED BY G.C. PER LOCAL CODE. - LABOR & MATERIAL SUPPLIED BY G.C. UNLESS OTHERWISE NOTED. - ALL DIMENSIONS TO BE VERIFIED BY. G.C. ON SITE. - DECOR SPECIFICATIONS ARE TO BE SUBWAY'S "TUSCANY II" SCHEME. - FREEZER MUST BE ADEQUATELY VENTILATED. REFER TO MANUFACTURER FOR DETAILS. APPLICANT COPY STORE MUST BE CONSTRUCTED AS DESIGNED IN THESE FLOOR PLANS SUBJECT TO FEDERAL, STATE AND LOCAL LAWS. RECIPIENT IS RESPONSIBLE FOR ENSURING COMPLIANCE WITH ALL LAWS. IF MODIFICATIONS ARE NECESSARY, PLEASE CONTACT DAI'S STORE DESIGN DEPARTMENT FOR WRITTEN APPROVAL OF THE REQUIRED CHANGES. THIS DRAWING IS FURNISHED BY DOCTORS ASSOCIATES INC. f DAI' D /B1A SUBWAY. RECIPIENT MUST DETERMINE IF THIS DRAWNG MUST BE SUBMITTED TO A LICENSED ARCHITECT OR SIMILAR PROFESSIONAL UNDER FEDERAL, STATE OR LOCAL LAW. ANY CHANGES MUST BE APPROVED BY DAI, DO NOT SCALE DRAWING. WRITTEN DIMENSIONS TAKE PRECEDENCE OVER SCALED DIMENSIONS. AND SHALL BE VERIFIED IN THE FIELD BY THE GENERAL CONTRACTOR AND/OR FRANCHISEE/OWNER. ANY DISCREPANCY IN DIMENSIONS SHALL BE BROUGHT TO THE IMMEDIATE ATTENTION OF DAI'S AREA DEVELOPMENT AGENT OR DESIGNATED FIELD REPRESENTATIVE. THE GENERAL CONTRACTOR AND EACH SUBCONTRACTOR SHALL MAKE HIS OWN INSPECTIONS AND MEASUREMENTS, DAI AND SUBWAY SHALL NOT BE HELD RESPONSIBLE FOR THE ACCURACY OF DIMENSIONS AND FOR ERRORS AND OMISSIONS IN THE DRAWNGS IF WRITTEN CONFIRMATION HAD NOT BEEN RECEIVED BY DAPS STORE DESIGN DEPARTMENT. THIS DRAWING AND THE INFORMATIONAL CONTENT HERE OF IS THE CONFIDENTIAL PROPERTY DAI OF AND IS PROVIDED SOLELY FOR THE USE OF AUTHORIZED FRANCHISEES, THEIR AGENTS AND CONTRACTORS. RECIPIENT AGREES NOT TO REPRODUCE, COPY, USE OR TRANSMIT THIS DRAWING AND/OR ITS INFORMATIONAL CONTENT, IN WHOLE OR IN PART, OR TO ALLOW SUCH ACTION BY OTHERS, FOR ANY PURPOSE, EXCEPT WITH THE WRITTEN PERMISSION OF DAI ACTING FOR SUBWAY. RECIPIENT FURTHER AGREES TO SURRENDER THIS DRAWING AND ANY PERMITTED COPIES HEREOF UPON DEMAND. r 00 N " co M O 02008 DOCTORS ASSOCIATES, INC. co 8 00 co 00 O O 00 SHEET #: 1 of 2 STORE #38845 7100 FUN CENTER WAY MILFORD, CT 06461 DEVELOPMENT AGENT: 325 BIC DRIVE LOCATION: TUSCANY II DECOR CALCULATIONS SYMBOL NOTE THE SUBWAY STORE DESIGN DEPARTMENT WILL NOT ACCEPT RESPONSIBILITY FOR ANY INACCURACIES. THE VERIFIED BY THE G. C. AND FRANCHISE OWNER BEFORE ANY ORDER FOR CALCULATIONS PROVIDED BELOW MUST BE THESE MATERIALS IS ACCEPTED AND PLACED. QUANTITIES CALCULATION WORKSHEET CUSTQMER'AREA 1) to . YARDS CITYSCAPE MURAL 2 2 0 YARDS OF TUSCAN STUCCO WALL COVERING 3 39 FEET OF UPPER DECORATIVE MOLDING 4 59 FEET OF LOWER. CHAIR RAIL MOLDING 5 20) YAR OF : QUENTIN WALLCOVERING (NON - TEDLAR) (OR :OPTIONAL BUTTERNUT BRICK WALLCOVERING) ABOVE CITYSCAPE MURAL. 6) ( - ) OPTIONAL)FEET OF HARDWOOD CROWN MOLDING AT CORNER WHERE WALL AND CEILING MEET) 7) ( - ) FEET OF HARDWOOD CROWN MOLDING CAP ON 8) ( 15 ) (FINISH YARDS OF RED WALLPCOVERING .SHELF) 9) ( - ) YARDS OF QUENTIN WALLCOVERING (WITH TEDLAR COATING) (FOR 48 " HIGH BANQUETTE WALL ONLY) 1) M /TS + S/M + 10% DIVIDED BY 3. 2) M /TS + T/S + R /TS 10% DIVIDED BY 3 3) M /TS + S/M + 10% 4) M /TS + T/S + R/TS 10% 5 (CEILING HEIGHT - 7' -6 ") X (M /TS + S/M + (Q /WC OR B/T IN CUSTOMER AREA ONLY)) + 5% DIVIDED BY 12 . 6) M /TS + S/M . + R /TS (+ W /TS IF WINDOWS NOT TO CEILING) + 10 %. 7) TOTAL LENGTH OF WALLS WHERE FLUORESCENT STRIP LIGHTING TO BE INSTALLED + 10% 8) HEIGHT FROM TOP OF TUSCAN STUCCO WALL COVERING TO CEILING (36" A.F.F.) X R /TS + 5% DIVIDED BY 12 9) Q /WC + 10% DIVIDED BY 3. (CUSTOMER AREA ONLY) SERVICE AREA 10) 2 4' X 12' SHEETS FONT -HILL PEAR LAMINATE* 11) ( 4.. -12' .T- MOLDING STRIPS * 12 ( 28 ) YARDS OF BUTTERNUT BRICK TEXTURED WALL C OVERING 13 ( - ) YARDS OF QUENTIN WALL COVERING .NTH TEDLAR COATING) 14 1 RIGHT ( 1 )LEFT VEGETABLE MOSAIC TILE 15 - ) (OPTIONAL) FEET OF COPPER CORNICE TRIM 16 - ) SHEETS FONT -HILL PEAR LAMINATE .. 4 X 1 SH EE T (OPTIONAL: FOR SOFFIT APPLICATION) 10) FP /L + 5% DIVIDED BY 12 11) (FP /L ON 36" HIGH WALLS X 2) + (FP /L ON 48" HIGH WALLS X 3) + 5% DIVIDED BY 12 12) CEILING HEIGHT X B/T + 5% DIVIDED BY 12 13) CEILING HEIGHT X Q /WC ± 5% DIVIDED BY 12 15) TOTAL LENGTH OF CUSTOMER SIDE OF HEADERWALL(S) OVER SERVICE AREA + 5 %. BACKROOM 17) W/R + 5% DIVIDED BY 4 18 PANEL COUNT FROM #17 LESS 1 17) ( 14) MARLITE F.R.P. WHITE (ALMOND OPTIONAL IF. PERMITTED BY HEALTH /BUILDING CODE) 18 13 PVC DIVISION MOLDING 19 3 PVC INSIDE CORNER 3 NER 20) 1 PVC OUTSIDE CORNER 21) 4 PVC CAP MOLDING . 19) COUNT ALL INSIDE CORNERS WHERE W R MEET 3 / M 20) COUNT ALL OUTSIDE CORNERS WHERE W/R MEET 21) COUNT ALL EDGES WHERE W/R BEGINS & ENDS & DOORWAYS. PUBLIC ACCESS RESTROQM 22 A /FRP + 5 %.DIVIDED BY 4 23 PANEL COUNT FROM #22_____ LESS 1 24 COUNT ALL INSIDE CORNERS - WHERE A /FRP MEET 25 COUNT ALL OUTSIDE CORNERS WHERE A /FRP MEET 26 COUNT ALL EDGES WHERE A /FRP BEGINS & ENDS & DOORWAYS. 27) HEIGHT FROM TOP OF WALL TILE TO CEILING (48 " -52" A, F. F.) X RR /2 + 5% DIVIDED BY 8. 22 14 MARLITE. F.R.P. ALMOND 23 13 PVC DIVISION MOLDING 24 B PVC INSIDE. CORNER 25 . 0 PVC OUTSIDE CORNER 26 4 PVC CAP MOLDING _ ,. 27) ( - ) YARDS OF TUSCAN. STUCCO. IN. RESTROOM(S) * CALCULATIONS ARE FOR FONT -HILL PEAR LAMINATE AND ALUMINUM T- MOLDING APPLIED TO 36" AND 48" HIGH WALLS. LAMINATE AND T- MOLDING, WHEN AFFIXED DIRECTLY TO DUKE FRONT COUNTER, IS SHIPPED READY TO INSTALL BY DUKE MANUFACTURING. NOTE; . NEEDED TO DECOR THE AREA ABOVE OR BELOW THE WINDOWS. THESE CALCULA11ONS DO NOT INCLUDE THE MATERIALS WALL .FINISH LEGEND (TUSCANY II DECOR) 'SEE TUSCANY II BACK -UP. SHEET 1 OF 4 AND 2 OF 4 FOR PROPER INSTALLATION OF WALLFINISHES IN CUSTOMER AND SERVICE AREAS. (SEE TUSCANY SUPPLEMENTAL TILE BACK-UP SHEET WHEN APPLICABLE) - SYMBOL DESCRIPTION MANUFACTURER SUPPLY INST. NOTES: [rte ® SUBWAY MURAL SUNGLO FABRICS D.A.I. G.C. VINYL WALLCOVERING (UPPER CHAIR RAIL HOLDING AND QUENIIN OR BUTTERNUT BO WALLCOVERING AS REQUIRED) TUSCAN STUCCO WALLCOVERING SUNGLO FABRICS D.A.I. G.C. VINYL WALLCOVERING (WITH LOWER CHAIR RAIL MOLDING) 2'X2' RECESSED 'FLUORESCENT FIXTURE W /PARABOLIC LENS WINDOW FRAME SPECIALTY STORE ' LIGHTING G.C. G.C. PAINT SHERWIN WILLIAMS #SW6356. COPPER MOUNTAIN. , (CITYSCAPE MURAL, UPPER CHAIR RAIL MOLDING AND QUENTIN OR BUTTERNUT BRICK WALLCOVERING AS REQUIRED) ::: TUSCAN STUCCO WALLCOVERING SUNGLO FABRICS D.A.I. G.C. VINYL WALLCOVERING ; (WITH LOWER CHAIR RAIL MOLDING AS REQUIRED) G.C. RED WALL COVERING SUNGLO FABRICS D.A.I. G.C. VINYL WALLCOVERING ACOUSTICAL DROP - IN TUSCAN STUCCO WALLCOVERING SUNGLO FABRICS D.A.I. G.C. VINYL WALLCOVERING (wITH LOWER CHAIR RAIL MOLDING) BUTTERNUT BRICK WALL COVERING SUNGLO FABRICS D.A.I. G.C. VINYL WALLCOVERING 2 STANDARD SURFACE MOUNTED FIXTURE WITH ENERGY SAVING BALLAST S AND 40 WATT COOL WHITE TUBES. SEPERATE EXHAUST FAN WITH A 100 CFM AIR EXCHANGE REQUIRED. CABINET /WALL LAMINATE WILSONART G.C. G.C. FONT -HILL PEAR ( #10745 -60) - INSTALL GRAIN HORIZONTALLY SPECIALTY STORE LIGHTING DAI MOSAIC TILE (RIGHT) VACUFORM/ WILSONART ` D.A.I. G . C . GRAPHIC IMAGES ( SEE TUSCANY II BACK -UP SHEET FOR DETAILS AND OPTIONS) WITH WILSONART #10745-60 FONTHILL PEAR BORDER AND 4 LIGHTED PURSE RAIL. _ 4" NW 421 Oh MOSAIC TILE (LEFT) VACUFORM/ WILSONART D.A.I. G, C GRAPHIC IMAGES (SEE TUSCANY II BACK -UP SHEET FOR DETAILS AND OPTIONS) WITH WILSONART #10745 -60 FONTHILL PEAR BORDER AND 4" LIGHTED PURSE RAIL v� 4I'4 WALL CAPS G.C. G.C. G.C. HARDWOOD PLANK (STAINED MINWAX #235 CHERRY AND POLYURETHANED • WITH MINWAX FAST DRYING CLEAR SATIN) la. FRP OR PAINTED WALLS MARLITE /G.C. DAI /GC G. C . WHITE FRP PANELS OR OFF- WHITE SEMI- GLOSS PAINT . ATh FIBERGLASS REINFORCED POLYESTER PANELS (FRP) ) MARLITE D.A.I. . G.C. FRP PANELS - WATER RESISTANT COVERING: WHITE OR *ALMOND ( *ALMOND OPTION ONLY IF PERMITTED BY HEALTH /BUILDING CODE) Itv FIBERGLASS REINFORCED POLYESTER PANELS (FRP) MARLITE D.A.I. G.C. ALMOND P -118 FRP PANELS - WATER RESISTANT COVERING. NOTE: ALL WOOD INTERIOR DOORS, UPPER & LOWER MOLDING & CROWN MOLDING TO BE STAINED AND POLYURETHANED W/ MINWAX FAST DRYING CLEAR SATIN W/ MINWAX # 235 CHERRY NOTE: PREFINISHED AND PREFRAMED COUNTER ENTRANCE IS AVAILABLE THROUGH PLYMOLD OR GLUE 2 PIECES OF 5/8" PARTICLE ' BOARD TOGETHER. SEE TUSCANY II BACK —UP SHEET #1 FOR FINISH OPTIONS. NOTE: F.R.P. SHOULD BE TO CEILING HEIGHT IN BACKROOM, BUT MUST BE A ' MINIMUM OF 8' —O" ABOVE FINISHED. FLOOR. F.R.P. IN RESTROOMS MUST BE FLOOR TO CEILING. DATE: AUGUST 7, 2009 DESIGNED BY: PHILL DELGUIDICE DRAWN BY: PMD RE ED BY: SCALE: 1/4 _ 1' -O" REVISION: 2' X 2' DROP CEILING WITH WHITE SPLINES. OPTIONAL PAINTED CEILING TILE AND SPLINE COLORS (SPLINES MUST BE PAINTED THE SAME COLOR AS TILES): BLONDE PAINT (SHERWIN WILLIAMS #SW 6128) *CUSTOMER AREA ONLY WH GRASS PAIN T (SHERWIN WILLIAMS #SW 6408) *CUSTOMER AREA ONLY* F7_ DESCRIPTION MANUF. SUPPLY ° G ° Mr NO NOTES: CEILING & LIGHTIN G LEGEND 2' X 2' DROP CEILING WITH WHITE SPLINES. OPTIONAL PAINTED CEILING TILE AND SPLINE COLORS (SPLINES MUST BE PAINTED THE SAME COLOR AS TILES): BLONDE PAINT (SHERWIN WILLIAMS #SW 6128) *CUSTOMER AREA ONLY WH GRASS PAIN T (SHERWIN WILLIAMS #SW 6408) *CUSTOMER AREA ONLY* SYMBOL DESCRIPTION MANUF. SUPPLY ° G ° Mr NO NOTES: g ► , 2'X2' ' RECESSED FLUORESCENT FIXTURE LIGHTOLIER SPECIALTY STORE LIGHTING DAI $ RECESSED FLUORESCENT FIXTURE (SPS2GSVA2FT120SB). USES (2) PL- L4OW /35 /RS BIAX 2G11 LIGHT BULBS. 2'X2' RECESSED 'FLUORESCENT FIXTURE W /PARABOLIC LENS LIGHTOLIER SPECIALTY STORE ' LIGHTING DAI O RECESSED FLUORESCENT FIXTURE W /PARABOLIC LENS (DPA2G9LS2FT120SB). USES (2) PL -L4OW 35 - -RS BIAX 2G11 LIGHT BULBS. ::: ■o■ VINYL DROP-IN i G.C. G.C. AS REQ'D. 2' X 2' DROP -IN PANEL ACOUSTICAL DROP - IN G.C. G.C. AS REQ'D. 2' X 2' DROP -IN PANEL 2' X 2' SURFACE MOUNTED LIGHT FIXTURE WITH SEPARATE EXHAUST FAN 4 , G.C. G.C. 2 STANDARD SURFACE MOUNTED FIXTURE WITH ENERGY SAVING BALLAST S AND 40 WATT COOL WHITE TUBES. SEPERATE EXHAUST FAN WITH A 100 CFM AIR EXCHANGE REQUIRED. /I AMBER PENDANT LIGHT (LARGE) 1RUE TO FORM SPECIALTY STORE LIGHTING DAI 7 LARGE SUSPENDED PENDANT FIXTURE (SW /AST /10 -PL): USES (1) 15W FLUO. LAMP ( MAXLITE MLS15EA)..PENDANT LIGHTS ARE PLACED AROUND THE PERIMETER OF THE RESTAURANT AND SHOULD BE INSTALLED AT A HEIGHT OF 6' -6" (198.1cm) FROM THE FLOOR TO THE BOTTOM OF THE FIXTURE. (A 'PENDANT STEM KIT'. IS AVAILABLE THROUGH SPECIALTY STORE LIGHTING FOR USE WITH HIGH CEILING). *RECOMMEND INSTALLING CUSTOMER SEATING BEFORE PENDANT LIGHTS TO ALLOW FOR PRECISE PLACEMENT OF FIXTURES OVER TABLE TOPS. I - CEILING FAN VILLA LIGHTING DAI DAI 2 MX2- AS /52CR REGENCY MX -EXCEL WITH 5 CHERRY FINISH BLADES. CAN BE. INSTALLED AS DROP STYLE (WITH 6" OR 2" STEM) OR HUGGER (FLUSH) STYLE. arrrr-+:. : . : ,.: :;: :' w . :, ............ ....: ..,.,,....,,..: ;'!11,1 .:,: '!..,1 ,'......,, n • 17' :: il k:.': ::.,,... RESTROOMS TO HAVE DRYWALL . CEILINGS X x 0) n oPPArrEc7 ' Flk RE_ ON FRONT AND BOTTOM \ TS to- zoo REVIEWED FOR CODE COMPLIANCE APPROVED OCT 0 9 2009 City of Tukwila BUILDING DIVISION NEW LOCATION RECEIVED CITY OF TUKWILA SFP 2 4 2009 PERMIT CENTER GENERAL NOTES: - CEILING HEIGHT IS 10' -0" - ELECTRICAL OUTLET HEIGHTS MEASURED TO BOTTOM OF BOX. - ONE ELECTRICAL JUNCTION BOX TO BE LOCATED IN CEILING ABOVE EACH WINDOW. - CUNO MODEL SW3 -PLUS WATER FILTRATION SYSTEM IS REQUIRED IN ALL. NEW STORES THAT DISPENSE BEVERAGES. THE RECOMMENDED PLACEMENT FOR INSTALLATION IS MOUNTED TO SODA SYRUP RACK BY COCA -COLA. SECONDARY PLACEMENT OPTION IS MOUNTED ON THE BACKROOM WALL. THIRD INSTALLATION OPTION IS MOUNTING INSIDE THE FRONT BEVERAGE COUNTER WHEN SPACE LIMITATIONS OCCUR. REQUIRED: 1/2" INCOMING WATER LINE FEED WITH 1/2" BALL VALVE SHUTOFF AND 1/2" FPT CONNECTION. MINIMUM 110 VOLT, 20 AMP ELECTRICAL SERVICE TO SUPPORT THE CARBONATOR AND WATER BOOSTER (MUST BE DEDICATED CIRCUIT). - SMARTCURVE STAND (MFR. DISPLAY -BOX) REQUIRED IN CUSTOMER AREA AT POINT OF ORDER (PREFERRED PLACEMENT). 21 3/4" X 13 1/8" BASE, 56" (WITHOUT HEADER) OVERALL HEIGHT. - BASKET STYLE SECONDARY CHIP RACK REQUIRED IN CUSTOMER AREA AT POINT OF ORDER (PREFERRED PLACEMENT). - EXIT LIGHTS INSTALLED BY G.C. PER LOCAL CODE. - EMERGENCY LIGHTS INSTALLED BY G.C. PER LOCAL CODE. - EXTINGUISHERS, SMOKE AND FIRE DETECTION SYSTEMS INSTALLED BY G.C. PER LOCAL CODE. - LABOR & MATERIAL SUPPLIED BY G.C. UNLESS OTHERWISE NOTED. - ALL DIMENSIONS TO BE VERIFIED BY G.C. ON SITE. - DECOR. SPECIFICATIONS ARE TO BE SUBWAY'S "TUSCANY II" SCHEME. - FREEZER MUST BE ADEQUATELY VENTILATED. REFER TO MANUFACTURER FOR DETAILS. STORE MUST BE CONSTRUCTED AS DESIGNED IN THESE FLOOR PLANS SUBJECT TO FEDERAL, STATE AND LOCAL LAWS. RECIPIENT IS RESPONSIBLE FOR ENSURING COMPLIANCE WITH ALL LAWS. IF MODIFICATIONS ARE NECESSARY, PLEASE CONTACT DAI'S STORE DESIGN DEPARTMENT FOR WRITTEN APPROVAL OF THE REQUIRED CHANGES. THIS DRAWING IS FURNISHED BY DOCTORS ASSOCIATES INC. ("DAI ") D /B /A SUBWAY. RECIPIENT MUST DETERMINE IF THIS DRAWING MUST'BE SUBMITTED TO A LICENSED ARCHITECT OR SIMILAR PROFESSIONAL UNDER FEDERAL, STATE OR LOCAL LAW. ANY CHANGES MUST BE APPROVED BY DAI. DO NOT SCALE DRAWING.. WRITTEN DIMENSIONS. TAKE PRECEDENCE OVER SCALED DIMENSIONS. AND SHALL BE VERIFIED IN THE FIELD BY THE GENERAL CONTRACTOR AND/OR FRANCHISEE/OWNER. ANY DISCREPANCY IN DIMENSIONS SHALL BE BROUGHT TO THE IMMEDIATE ATTENTION OF DAPS AREA DEVELOPMENT, AGENT OR DESIGNATED FIELD REPRESENTATIVE. THE GENERAL CONTRACTOR AND EACH SUB-CONTRACTOR CTO SHALL MAKE HIS OWN INSPECTIONS AND MEASUREMENTS, DAI AND SUBWAY SHALL NOT BE HELD RESPONSIBLE FOR THE ACCURACY OF DIMENSIONS AND FOR ERRORS AND OMISSIONS IN THE DRAWINGS IF WRITTEN CONFIRMATION HAD NOT BEEN RECEIVED BY DAI'S STORE DESIGN DEPARTMENT. THIS DRAWING AND THE INFORMATIONAL CONTENT HERE. OF IS THE CONFIDENTIAL .. PROPERTY DAI OF AND IS PROVIDED SOLELY FOR THE USE OF AUTHORIZED FRANCHISEES, THEIR AGENTS AND CONTRACTORS. RECIPIENT AGREES NOT TO REPRODUCE, COPY, USE OR TRANSMIT THIS DRAWING AND/OR ITS INFORMATIONAL CONTENT, IN WHOLE OR IN PART; OR TO ALLOW SUCH ACTION BY OTHERS, FOR ANY PURPOSE, EXCEPT WITH THE WRITTEN PERMISSION OF DAI ACTING FOR SUBWAY. RECIPIENT FURTHER AGREES TO SURRENDER THIS DRAWING AND ANY PERMITTED COPIES HEREOF UPON DEMAND, O N co O N 0 O N cq) ©2008 DOCTORS ASSOCIATES, INC. O d• c6 cc co O O 00 i SHEET #: 2 of 2 STORE #38845 7100 FUN CENTER WAY DEVELOPMENT AGENT: REVISION: OPTIONAL: 4 1 /2" HARDWOOD CROWN MOLDING (MINIMUM 8'- 6 "[259.1cm] CEIILING HEIGHT REQUIRED FOR THIS r ^� ^•^ OPTIONAL: 4 1/2" HARDWOOD CROWN MOLDING (MINIMUM 8'- 6 "[259.1cm] CEIILING HEIGHT REQUIRED FOR THIS OPTION ) �, *NOTE: FOR A MORE PRIVATE NOTE: &Wd „ " AND /OR UPSCALE AREA BELOW . 1 X 8 HARDWOOD PLANK EDGES (STAINED APPEARANCE THE HARDWOOD PLANK WITH ROUTED. INSTALLATION OF GLASS TO BE FINISHED MINWAX #235 CHERRY AND BLOCK OR ETCHED GLASS WIT LOWER CHAIR POLYURETHANED WITH MINWAX DIVIDERS MAY BE RAIL MOULDING FAST DRYING CLEAR SATIN) INSTALLED ON TOP OF STAINED MINWAX p „ (STAINED HARDWOOD CHERRY AND y y THE 1 X 8 , g � { ,. , ?� `° t , ' ss? . , , • �• - r ,; •; :, , , >fi i I�x c f ;. r� ,.t -..,f ��,. , �: E , .. � , t' }} ,,1 (, • <; �: � �_,, , � .,. }. .: n'k•. � -.. ��'� I.. I: �. fry 6 �E.,.. •l ; '�' � -� �; �. , ,:h� ��.�. a .. rr •.x" : - ,. '• . , .. . c , �` ..., n:. ,,, .�,..., , � .. :,•: �.�. , _ �1. awd :kc . "' :1.1 E1; yr ... „ I 1 .- x. I �:.;: ''/ i. �':. t ?� g i ,, { , �� :. , . '� S „�i' � : , ., . - , ; ' �. � ; • F _,. ,... .� '�9. 4!' "4r. # T '� ,,.;, �, , •, r „ r ,,, i .:• t �,� � ,.. � "`' 1 x , • `: ,o ..,..,. _ ' °`� _,, °� , ,a�� . .,.� h.A'f} 1' ink ' , -:` } � * , . ,,, x VERTICAL WALL ART NOTES: .t, 1 x 2" SHELF IN BETWEEN FIXTURES LIGHT F 1 1HOI3H ONI1130 1 OPTION 1) QUENTIN WALLCOVERING (AS PER FLOOR PLAN) ,,, .,, -. •,,i. ..., _ w' , • ,,• • ;:., ,,.; ,•.•; ;• ; • t ;, '••'. ; • •' • • ` • . �; . " s ''... •- ':': '' • •� • ' • ' ;; • �,. • • • s'.. • r':� s . � :.� 7 '. • • : '• ' • � •� �• ' ; �. . • • . .. :• - , �. • a ,, ...• �•• -' :.. ..�•..• • .•: , . t . „ . , �. + �• •w,� . ,�. .,, :.Z �.. •: _ : •,•,••, ••• :v ... , . s , ; t • • • � t• . •• .. • .. •- . _ . .. ,.. • . • •: :• •...• • . •.. ..: . . • : - ' • . ... • .. .. .. :. .. ... ... •► , ..... : •. . •a L ..• w• . . • ... . . . • •. • .- .• ": •• • ••*:•• • • r • 1 . ,. r .. . : , . :: . • . . • .. .• r .... , s ,• '.• .... . •• : • . ...•.. J ' r . . . . ... • . : ••. ,, .., .a. ,,.. , a , . , , • :• 1• ••..• ••_ • .N :• •. s • •� , . i .. ., .. • • • • . �1 ..., .. •s 'v.• •. ,• .:. • ,.. ... , . , ... , .. .. .•. • . , ..• .• • • ,. • • • . .. ••••••• . •• : . . • : • . � • . w • ••.: ••..' s.• • .: ::••: ,.. .. • .: • •, •� . • • • , •- ♦� .• •., , • h • • :..'... • •• ..• ' • ... .i, • •,• .., ;.. • OPTION 2 BUTTERNUT BRIT ) WALLCOVERING. " CROWN MOLDING 111 1 p X 4- SH OPTIONAL•. UPPER WALL LIGHTING STRIP SURFACE FLUORESCENT FIXTU G. MANUFACTURER. NORA LIGHTING. MODEL . G 28T5 BULB) NULS 28 4 LON F NULS 21 3 LONG ( F21T5 B 3( 0 ULS 2. UP TO (1 N NULS -21 FIXTURES I CONNECTED TO SING POWER CORD FEED. PLACED ABOVE UPPER DECORATIVE TRIM (N OVER WINDOWS. Ma ON 1 X 4 SHELF V 4 2 CROWN MOLL 1 (BY HOUSE OF FARA ( , M HIDE FIXTURES S MOLDING TO BE STAINED 2 COATS MINWAX . CHERRY AND POLY- C URETHANED WITH MINWAX . FAST DRYING SATIN) RED WALL COVERING (REFER TO LOOR PLAN FOR EXACT FLOOR PLACEMENT) GTE. NO UPPER DECORATI #235 8" # 8 [20.3cm] "I POLYRETHANED "I PLANK. 1 "9 —,L I J [229.0cm] CEILING HEIGHT - ,` Y 9 —,L (NYld 21001 ZEld SY) - 229.0cm] jj ++iji 1 ill! ! III 1 � I �111llfl�l I IN�I�iilli . ---- VIII ! N •. ,. �T-r - ..+__ :. - ..,..,- ,- •..w,, �,..^ f ..-•� ._. .: r a „:; - -° ter. <;, - UPPER 1 1/2 DECORATIVE TRIM MOLDING „ EMPIRE TRIM 9" PORTION OF MAIZE (UPPER P RTI ( CITYSCAPE MURAL -. -12 ALTERNATING MAIZE TONE CITYSCAPE MURAL PA NELS n ..... WITH MINWAX FAST DRYING CLEAR SATIN ) \ = a � � r M I, E v M � �' I :' . •• • :. . � ..: ,:. :. , :: •'..- :.....• ;,:!.; ..,,.._..:• .,:, • • �.. ,... �,.....:. - • :'... - .::� : r; .. • ..::... ,: < . - ::. •: -• ... :...... .. ,.,. " .. .. .:., ,. ...... ... :. - : .:.. -,�� .: - :••:.....> ...1, : :.'.: <:... � -: .. ... - ...: •. • : - ,•; "' •.,:...:•.: = . :.,••.:�,•.• .: -:.:. ,: -:: • � • .. , � • " :: s _;- ',i'.., . ;.,, s ...,.,.. .: ...:.: . , t ,.:. , ;. �'....:':: -..: �' _ ..,.. ... , .. -_ .� ::.,.• . •,�'.. .... -.... .. .• / �� _ *EIGHT DIFFERENT PRINTS AVAILABLE LEFT). CAN BE ORDERED (SHOWN ) INDIVIDUALLY OR IN SETS. STYRENE FACED •GRAPHICS PRINTED ONTO STYR ., . . ..... . � . � . s , .: �<, ::.. � - �''�` �.. * + :•;.``'► ,. i, -•� � ..:. ::w 1 . , . _..::_ .. . _ �: ., � .., • r . , ,. ,., : ', r t .: .. _ � :.: a''' .... ., ..:.. � � . ? . r` < #� �...,, _. ., _ � ...,. a.. .,.. , MOLDING INSTALLED FOR ENTIRE SECTION OF RED WALL COVERING. COVERING IS TO BE THE WALL C ERIN INSTALLED VERTICALLY ON -THE WALL. -' " . LOWER 2 1/2" CHAIR RAIL MOLDING CA S UCCO WALL COVERING ( CONTINUOUS ROL L) .: ., BULLNOSE / I � /1 . i\ i\ 1 � �, \% TUSCAN STUCCO �: WALL COVERING 1 ", : .• 'I = • ,.. ;,:... . , ,Y �.. _ ...... , ,. � ,..- • - �,rl „ , ,, : ,.:, . .. ,, � . . , ' ,�,. , • ... , , :, ,::..:. ..; ::..:.; ; �.. ?, _.:4 �:; . jil ,,, b , r „ . � � ' �+., • w ' •. «, rx h :�.z �,� , >y': ;, .._. • �: ; ...., .,., . < f �. _. • , >, � :.�; . , :><,{ . , � t , .;jj�j :.:a l ;.,.. .� y sw.. , _ .. '111:.11 f.ee .,,.. 3.._, 1 .�,. :.. _ , �' � . > . • • 1�1 1t 1 "' rI ' -z -�• -• ---- '• TUSCAN STUCCO WALL COVERING (CONTINUOUS ROLL) COVE BASE OR 1 COVE BASE OR 1i . FOAM BOARD: ••BLACK ALUMINUM FRAME. • MOUNTED TO WALL USING %%0241% BULLNOSE !► ► .•∎!� ,. /,♦ / Y _ 5/8" DRYWALL 2" 2 X 4 WOOD OR METAL FRAMING , . �, : ? � � �1€ : '�� { $ # A %,,.. r ,. I , , , , � 3.� ��: .�' ; �.�; � �..� ¢ :i 54. .. , 1- R , 1 ■ ,,� 4 . �'�' .. d. •T 1 ' � Y • d • ! � .� �• f = , � -'�0 SUPPLIED 1 '. t• I HANGIN G SECURITY HARDWARE �' H WALL ART PIECE). fi WITH EACH ^+ / / { 4. w ;`; •DIM. 22 3/4"W X 49 3 4 "H X 1" DEEP • UPPER AND U ON WALL BETWEEN PP H NG LOWER CHAIR TYPICAL L.:.I MOLDING. � ,. a;, MOUNTING SHOWN BELOW. REFER TO '` � � ° h <� FLOOR PLAN FOR EXACT PLACEMENT. s,1 '" NOTE: CAN NOT BE USED ABOVE �� ®� _ _ \ [95.3cm] ..:..•..... „ ;.' -. -. ,.: ••.... , ....... . . ,. ..... . - �•.:• ..,.. ' . .. • .• •: ,• r • '.7' "' ' ' ' .: � : • :. :. • .:• � :. • ::: - ,...t, ..:.: ,: . ' . • ..: ..: LOWER 2 1/2" CHAIR RAIL � TUSCAN STUCCO WALL CO 37 1/2" :. .....;. ,. ......•.. :'•:••:.•�_. -•.;, ._ ..,..-;.:',... _ ... ...:. •�•.:... . � ' :.: .'; • •�; -� ' . • .:..• :. ::•�. < ' •<:: ' : '.:.: '.:. �..:_ :.• '. , :. : •:•... ••:- ',�'�:., ,.. . < : ,.... ..,y... �:'• .. ' ':. � - � • : .: • • BULLNOSE \ \ / SECTION VIEW ... :..•:.- :•.:.� .. .•.•.;.,.; •:,.•.: :'.::.:, :..:;',• ' :- ....... .. ... -. ... :.,..::' • , _ ..t. (CONTINUOUS CONTINUOUS ROLL ) SATIN DIVIDER (TYPICAL) C S TING G I r I I I I I I J I I I I: I } I COVE BASE OR BULLNOSE COVE BASE OR (SEE GENERAL NOTES 1 & 2) ♦ WALL ELEVATION(OPTIONAL) BANQUETTE WALL BENCH SEATING. ' SECTION VIEW WALL ELEVATION(TYPICAL) CUSTOMER AREA "RED" CUSTOMER AREA A1 ' " { . �; 4 , ' •1 1 � � " , ..: WALL PLANT MOUNTING BRACKET TO BE UPPER :0A1M .TOP OF THE 10 5 L (SEE GENERAL NOTES 1, 2 & 5) (SEE GENERAL NOTES 1, 2 & 5) fi K ' .; F, !�.', ` " :. OPTIONAL: / (MINIMUM 8 -6 [259.1cm] BUTTERNUT BRICK HEIGHT REQUIRED FOR THIS WALL COVERING ^\ , ) / / // � � CEIILING //, / %j� OPTION 2) BUTTERNUT BRICK L/. // //. I , OPTION) WALLCOVERING. / /� / / / ��,� / / / / //. j / / // \ \ . . . � . \ \ \ \� �4 \ \ \ \\\ ®`� \\ \ � \� \�\� \ s►► \ \ \�\\ \ , \ \ \ \�\ \ \ \ \�\ ,1P \ \ ` \ \ . \ \ \� \\ \ \. \�\ \\ \ \ � / 1 ' •' WALL ART PRINT WALL ART PRINT WALL ART PRINT 4:1=4 „ ,,,, WALL ART WALL ART PRINT WALL ART PRINT � / / % / �� / /. �� \ %\ \ \\� \ % \� \ � \ �\ ' � ' 1 � '' J I� L ills- • UPPER 1 1/2" DECORATIVE TRIM MOLDING a .. /� / /�� /� /� / / / / / / / // / � / 1 6' (MINIMUM) Nall- -L , TLCi- - � f , 1�i r.�'KIALl �r r I!!� - 1 . �!l��Ji: / [182.9cm] /PRINT _ I �, . «, -�• . , No i' iT ! FIP1 \ / I 1 ..r r rl �i �]1 % / /� �i O / '! • // % / / / / /7 •zf ;; / MENUBOARD \ \ \� \ ., S norkoconowor i fs : < . t.:. s up, ::': ,/ LOWER CHAIR RAIL MOLDING ..1 CITYSCAPE MURAL GROUPS OF THREE PRINTS z {ll� I�h1(II / / /, j. , , / , I' . � i / = in , [203.2cm] ■ (UNLESS OTHERWISE NOTED ON FLOOR PLAN) � \ \ \� \ \ \� s \\ \ . \\ \ \ � \ .■.. f.... r..■... f �■... - 1 1 T ■ r umliw . co ot ie- - I i..r ..■r: -o 1 . r - T 1r rA / :! / ' / / / . / /i /, / / . / �// / �i' ' ' r ® �► I . ., I ` ® i ■r te, �■.■r■■.rs r1■�'1�� { � MAIZE TONE CI TYSCAPE MURAL ct c? w _ 12 3051 [.c �■Im■ r■ ■ � � r a ,rl \ \ ! 1 \\ \ \\ �\ \ �'� \ \ �\ \\ yr ... r>r T_ � Ir 1 ■, �T i l■_LrT�,�Tiw i rT:�: �Ti •L NA : I \ \\ \\\ II,II _ L :)�'..��■r r• _ ...� I .IL■r ■simstwo ■r.■.i..n�■r \ .\ �\ \ \\ \ \ \ \ \ \ \ \ \ \ \ \\ WALL PLANT MOUNTING BRACKET TO BE •• [ IPMERDECORA11VE TYPICAL D , ® � ,. ,_.<- '. :•: t: :r %''::..;:,; ;';,.;• °.�, .. ° • ....::.. : ; � i� �. ✓ S / _L \ \r \ � �SS: 4. \. � rr ralir�'�uwLirlr �1 WALL WALL •�� r.�' ►'�;: 1 1� �� .w 1 WALL / a* .. WALL WALL I� EIGHT DIFFERENT PRINTS AVAILABLE (SHOWN ABOVE). CAN BE • ORDERED INDIVIDUALLY` OR IN SET .CO P HOTO( GRAPHS DOUBLE MATTED. •MOUNTED TO WALL USING HANGING /SECURITY HARDWARE (SUPPLIED •WITH EACH WALL ART PIE CE) - •DIM. 26 "W X '.'"6"H X 1" DEEP " • ON WAL BETWEEN UPPER AND LOWER CHAIR RAIL MOLDING. REFER TO FLOOR PLAN FOR EXACT PLACEMENT. •MOUNTED 12 ; " , [31.8cm] FROM THE TOP OF THE CHAIR RAIL MOLDING TO THE BOTTOM OF THE FRAMED PRINT. i■filr=Ti, �irrir II 11. 1r■s !Eli i■��rl�■r■i�,■l■�■■ 1• I, N .- M ■ ^ E r7 rn \ \ \ ;] t �� WALL . , . , ' •, , ;:' _� [wok' l6 - ./ \'Ii mo; 11111 BREAD T 1Y� ■r ■■ �� 182.9cm m■�fatma■tl�■J� ■1 >�T \ �- \ ► � � / 182.9cm wi r■■=f■tU■ tri No�±1 ll, r i Im • ■ 1 _ tri mosruirs r 1 R.I in 1 OW�lrI i � �- PAPER SIDE TUSCAN STUCCO WALL COVERING COVE BASE OR BULLNOSE / CITYSCAPE MURAL LOWER CHAIR RAIL MOLDING GROUPS OF TWO PRINTS SIDE BACK COUNTERS WALL SIDES AND DOORS: FONT HILL PEAR TOWEL SOAP DISPENSER (REQUIRED) WALL HAND .SANITIZER DISPENSER \ � . %' � = LAMINATE (WILSONART #10745 -60) DISPENSER (INSTALL GRAIN HORIZONTALLY) (REQUIRED) TOP: STAINLESS STEEL WALL ART -- SQA LIRE - WALL ART VERTICAL (OPTIONAL) .. SERVICE AREA - SIDE FACING ELEVATION (TYPICAL) SUPPLIER - CHICAGO METALUC , i, i s 2 _ 7/8" Mme "'. Y „• :• _,,pr•,• ,�<,_ - � ` , ; q - b I� , '' t 1 > '. ► , � 4w i� 4• ..� ' .a• f' • :'W! f �f' - -a � X y '' Ff'• . ,. i 1 FINISH » - COPPER (SEE GENERAL NOTES 1, 2, 3 & 5) 3.1/2 PROJECTION CONVEX FACE #63 40 0 3 ♦ •- M 1 A lp � OPTION 1) QUENTIN WALLCOVERING OPTIONAL: 4 1/2" HARDWOOD CROWN MOLDING OPTION 2) BUTTERNUT BRICK WALLCOVERING. MINIMUM 8 -6 259.1 cm CEIILING ( [ ] BUTTERNUT BRICK HEIGHT REQUIRED FOR THIS OPTION) WALL COVERING / /.� / / / /� / / /�/ / / / / // //I ® / /� / 4 / / / / /�'� /// % /� // / / // ° ," / ,ft / /� / � /�\ \\ \ \\ / / / / � / / \ \� \ \ \ \\ / /// :.• %I PANEL "A" (LEFT SIDE) PANEL "B" (RIGHT SIDE) seal A , NOTES: 1 •) GRAPHIC IMAGES TO BE PRINTED ONTO PANELS AND VACUUM FORMED TO CREATE ' : 4 THE APPEARANCE OF 4 1/4" X 4 1/4" CERAMIC TILES WITH 1/16" GROUT JOINTS. 2.) FOR CONVENIENCE THE FRAMED VACUFORM TILE AND LAMINATES CAN BE ORDERED FOR BOTH NEW AND REMODELING LOCATIONS A LA CARTE FROM DUKE MANUFACTURING. ALL FRONT COUNTER UNITS ARE SHIPPED :WITH A COMPREHENSIVE INSTALLATION GUIDE, FROM THE MANUFACTURER, ON NE ENTIRE PROCESS, FROM COUNTER SET -UP TO DECOR INSTALLATION. ,/ .% ' N \\ \ \ \ \ \ \ \ \ \\ \ • \ \ \\\ \ \�\ \ \ \ \ \ \ \ \\ \ \\ \ \ \ 1 \\ \\ \ \ \ \ \\ \ \ \ \ \� \ d ,.. . / � w = V' w \ Y I Y Y ix J�. Y I Y- 1 Y " � ■�i 1 i t T \ \ \\�� \ \ \ \ \ \ \ \;� � \ \\ \ \ \ \ \ \ \ \ \ \ ' \ \ \ \ \� \. \ \ ■\ \ \\ \ \� 1\ \ \ \ \ \ \\ \\ \\ \ \ \ \\\ \ \;\\ \ \� \ \ \� \ \ \ \ \� \ \ \ \ \ \ \ \ ■ \ \ \ \� \ \ \ \� \ \ \ \ \\ \ \\ \ \ \\ \ \ \ \ \ \ \ \ ` \ \ \ \ \\ \ \ \ \ 1 \ \ \ \ \. , �\ \ \ \ ♦ FRONT PROS HARDWOOD CROWN MOLDING FRONT COPPER CORNICE TRIM ■]_I�1�1■ ■s�1r�r■w■ ' �I�■,1r■l�T�i: , rwl ■��'�r■�rs 1 1 - ' f__� ' � :. r . ` .. 1 -.T-�� - � L r _ m � , _ . -,� - C 1 i. 7 r � I / lei NI Y'G ■~ ml / MENUBOARD / V I V \ / / /// / / / � / / // o I Y 9 —,L (NVId 21001.3 2Ad SV) UPPER 1 1 2 DECORATIVE TRIM MOLDING IIIIIIII Men ♦ ill� S MOLDINGS (OPTIONAL) WITH MINWAX FAST DRYING ` ?' �' r > I! 1 , Ise . �Y" z, t = EA f�r - 1• x 12' HARDWOOD PLANK . E [w3ZTOZ / �� / -� �I i��/ ✓ /I/ ' 411e/ CITYSCAPE MURAL I� n E LOWER 2 1 2 CHAIR / o RAIL ..�■rsr�.r �■1■I�■I�1�'I AND POLYURETF;ANEI) CLEAR SATIN. !�! ■ LT: '� Tom■ .MATH / / \\� \ \ \� 1 \\ \ \ \ \\ \ ' \ \� \ \ \� \ \ \ �`i \\� \ ��ir? ` ROUTED EDGES STAINED- MINWAX 23s iTi' I� �I�f ' = 1 CHERRY,AND P YURETHANED VNTH �o f j M= r� ■■rt�i 1 o ■1r r ■rl i',r11�aIs MINWAX FAST DRYING CLEAR SATIN) !/ // ' / //�I� 0.. 1 i / /� 'Ay►'>' / # GENERAL NOTES: ■1i,r"1■Ti� • ! 3 4 / p o ��lrl_ _1 1■ 1�� 11�i■r��i■�■es■r r - lfira [wQ1. L£L] �' 567 -1 - A. �I M ■��11111I : I � � � ` 1 -z / z , N 4. FACE FOR OF THE LOCATIONS UNIT WITH (MOSAIC NEW DUKE TILE PATIERNS(S) FRONT WITH COUNTERS THE FONTHILL FINISH PEAR MATERIALS FRAMING FOR WITH THE FRO 3/4T " WITH THE COUNTER PREFABRICATED AND READY TO INSTALL. T- MOLDING) ARE SHIPPED WIT THIS APPLIES ONLY 1F THE MATERIALS ARE TO BE INSTALLED DIRECTLY ONTO THE FRONT OF THE UNIT. PREFABRICATED AND FINISHED 36" AND 48" SERVICE AREA SIDE WALLS AND COUNTER ENTRANCE GATES ARE ALSO AVAILABLE FROM DUKE MANUFACTURING. 5• SEE CHAIR RAIL MOLDING DETAIL (THIS PAGE) FOR STYLE, FINISH AND PROPER PLACEMENT. 6. ALTERNATE COUNTER SIZES MAY VARY MOSAIC TILE PATTERN PLACEMENT. PLEASE REFER TO DRAWING FOR EXACT PLACEMENT. r, 6 Y � I II II II II II II II ►\®/ ��e /l \ ®/� \�/� \,/1 \,/1 \, /1 \, /� \,I N Y Z /l I. '` .�1 ■ ■1T�r1� �r ■,.■ � � k \ \ TUSCAN STUCCO WALL COVERING SIDE PAPER ® WALL T SOAP DISPENSER SIDE WALL BACK COUNTERS DISPENSER HILL WO��A-�-� SIDES AND DOORS: FONT PEAR COVE BASE OR LAMINATE ( WILSONART #10745 -60) (REQUIRED) BULLNOSE (INSTALL GRAIN HORIZONTALLY) TOP: STAINLESS STEEL HAND 1 FRONT PROFILE FRONT PROFILE LOWER CHAIR RAIL MOLDING UPPER DECORATIVE TRIM MOLDING SANITIZER DISPENSER (REQUIRED) (OPTIONAL) 0 SERVICE AREA - FRONT FACING ELEVATION (TYPICAL) SUPPLIER - HOUSE OF FARA TYPE- HARDWOOD SWISH - STAINED MINWAX #235 CHERRY MOLDINGS (REQUIRED) FIRE RATINGS SEE GENERAL NOTES 1 2, 3 & 5) ( ) AND POLYURETHANED WITH MINWAX FAST DRYING CLEAR SATIN. DRYWALL 10 UNBONDE CODE �,�,.• COMPLIANCE APPROVED •ALL NEW DUKE FRONT COUNTERS O ARE SHIPPED WITH PREFABRICATED DECOR PANELS READY TO INSTALL. •PREFABRICATED DECOR PANELS ARE AVAILABLE READY TO INSTALL FOR SITE BUILT 36" AND 48" HIGH SERVICE AREA WALLS AND ARE MADE TO ORDER. FRAMED AND SOFFIT ABOVE FRONT 1 HARDWOOD SOFFIT (MOUNTED WALL SERVICE AND SIDE OF SERVICE'AREA. 1) QUENTIN WALLCOVERING. 2) BUTTERNUT. BRICK. WALLCOVERING: 3) FONT HILL PAINT (S LAMINATE 4) BLONDE PAINT (SHERWIN WILLIAMS 5) FIRED BRICK RED PAINT (SHERWIN I FINISH 'OPTIONS: z (WILSONART #10745 - 60) SW6128) o WILUAMS SW6335 I FLAME SPREAD OPTIONAL: WITH FRAMED AND DRYWALLED VERTICALLY) ABOVE FRONT AND SIDE OF 3 PROJECTION E (CH CA M ALL C CHERRY AND POLYURETHANE X WITH MINWAX #63.40.035 TO ORDER CALL 1 -800- 323 -7164) FAST DRYING CLEAR. SATIN. FUEL CONTRIBUTED VALUE 0 SMOKE DEVELOPED VALUE 5 SUNGLO TUSCAN 15 OCT 9 2 OO9 City of Tukwila BUILDING DIVISION STUCCO WALL COVERING FLAME SPREAD INDEX 5 FONTHILL PEAR LAMINATE ( WILSONART #10745-60) # ) SANITARY COVE �- '�• •l•••••wu••••• ,N!.nu y r m , r, r N .; rni , r r P 1. v, Ln.,; uit,t,rg m n r, r f,! ap, n- y1 l a, } ••• SIDE WALL •••�••• •••�•• ••�••- -• -• •- •�•�•••••�` FUEL CONTRIBUTED VALUE VALUE 10 SMOKE DEVELOPED •ALSO AVAILABLE FROM DUKE MANUFACTURING ARE PREBUILT, PREFINISHED MADE TO ORDER 36" AND 48" HIGH SERVICE AREA SIDE AND FRONT WALLS WITH OR WITHOUT PREFINISHED COUNTER ENTRANCE GATE. • PREFABRICATED DECOR PANELS ARE AVAILABLE FOR EXISTING FRONT COUNTERS AS WELL. FONTHILL PEAR LAMINATE ( WILSONART #10745 -60) W /MILLED ALUMINUM TEE - COUNTER TOP SM BUTTERNUT BRICK 15 COUNTER TOP \ o a; 0 •I HARDWOOD PLANK WITH ROUTED EDGES (STAINED MINWAX E235 CHERRY AND PoLYURETHANED WITH MINWAX FAST DRYING CLEAR WALL COVERING ROU EDGES (STAINED MINWAX /235 CHERRY AND PoLYURETHANED uvlTrl I� � $ I MINWAX FAST DRYING CLEAR FLAME SPREAD INDEX 5 RECEIVED CITY OF TUKWIIA MOLDING /� I / / � I BASE (IF $ REQUIRED BY /\ /� LOCAL HEALTH /� I FUEL CONTRIBUTED VALUE 20 _ _ EVELOPED VALUE SMOKE DEVELOPED E SATIN) - II SUNGLO QUENTIN WALL COVERING SFP 4 ZOOS PERMIT CENTER BULLNO OR BULLNOSE 1 \ \/ ./ ./ ;/ v .I. SATIN) = P URSE RAIL - 11_ - � \ � ' [15.2cm] ��---- :� l FLAME SPREAD INDEX 10 �k / ►�t. � a ` �_� 4 WIDE co -- - - " 4 WIDE PURSE RAIL �� L,.�I■ I ® ��••, �..... WITH LIGHTS AND I . � i !I h1 FUEL CONTRIBUTED VALUE 0 \ \ _ I WITH LIGHTS AND i FONTHILL PEAR FINISH COUNTER ENTRANCE FINISH OPTIONS: ■ r, F , [w LZ l] �I-10 0I 0 `� \ Y"• [wo6'LZL] SMOKE DEVELOPED' VALUE 5 CUSTOMER 5/8" DRYWALL ♦\ SIDE p n ♦ 2 X 4 WOOD OR \ METAL FRAMING \.♦ EMPLOYEE SIDE _ ti [I- 1.1 , .Zt 210 w . FONTHILL PEAR FINISH III COVERING _ I III II T1 \ _ _ a r ® E v �: ' -' r ' y �i \ : :. +'' ' : ,, 5 -, ,v `: ,, , BL w: ,.,` ` , L ''M; n FLAME SPREADAINDEX 15 FONTHILL PEAR FUEL CONTRIBUTED. VALUE 0 , L� 36" [91. f �`� ® Y 9£ LAMINATE (TY a SMOKE DEVELOPED VALUE 20 OPTION #1 (PREFERRED) PREFINISHED & PREFRAMED COUNTER ENTRANCE #( . - ( WILSONART. al w WILSONART LAMINATE (G.P.) TYPE 107 TYPE 335 TYPE 350 4 4� I I I l l I I I I I I I l' I I I I I I I I I I I I I I I l f #10745 -60) GRAIN 1 \I� ■a FLAME SPREAD INDEX 55 80 70 65 GATE AVAILBALE THROUGH PLYMOLD AND DUKE MANUFACTURING. " OPTION #2 GLUE TOGETHER 2 PIECES OF 5/8 PARTICLE BOARD AND FINISH WITH WILSONART #10745 -60 FONTHILL PEAR LAMINATE. EDGE WITH 1 1 /2" HARDWOOD MOLDING (STAINED WITH MINWAX #235 CHERRY AND POLYURETHANED WITH MINWAX FAST DRYING CLEAR SATIN). SECURE WITH HEAVY DUTY HINGES AND INSTALL A BAR LATCH ON THE EMPLOYEE SIDE. \ / \ \ INSTALL _ � HORIZONTALLY FUEL CONTRIBUTED VALUE 0 0 0 0 105 „ 3/4 MILLED ALUMINUM FONTHILL PEAR COVEBASE OR 2 -0 PEAR " FONTHILL PEAR MOSAIC TILE MOSAIC TILE C OVEBASE OR PATTERN* PATTERN BULLNOSE I--3/4" COVEBASE OR II LAMINATE (TYP) BULLN SMOKE DEVELOPED. VALUE 30 95 135 MARLITE FIBERGLASS 200 9.... 0 T- MOLDING #ALU -1028 LAMINATE (TYP) BULLNOSE 160.9cm] „ „ MILLED ALUMINUM BULLNOSE 3/4 MILLED ALUMINUM ( WILSONART (PANEL A) (PANEL B) REINFORCED PANELS ' VC SUPPLIED BY OPENING MOSAIC TILE PATTERN T- MOLDING #ALU -1028 ( WILSONAR 3/4" MILLED ALUMINUM T- MOLDING #ALU -1028 VC #10745 -60) OUTWATER PLASTIC T = MOLDING. #ALU -1028 FOR FRONT TO BE FRAMED WITH VC SUPPLIED BY SUPPLIED BY OUTWATER #10745 -60) INSTALL GRAIN INDUSTRIES INC. INSTALL GRAIN VC SUPPLIED BY LINE BREAD FONTHILL PEAR LAMINATE OUTWATER PLASTIC PLASTIC INDUSTRIES INC. HORIZONTALLY HORIZONTALLY OUTWATER PLASTIC CABINET ( WILSONART #10745 -60) INDUSTRIES INC. . SIDE VIEW INDUSTRIES INC. " (OPTIONAL) FRONT VIEW SIDE VIEW FLAME SPREAD INDEX FUEL CONTRIBUTED VALUE DEVELOPED VALUE 0 450 SMOKE VACUFORM MOSAIC TILE: - (SHOWN WITH COUNTER ENTRANCE AND (SHOWN WITH BUILT SOFFIT WALL OPTION. *CEIUNG (SHOWN WITHOUT COUNTER ENTRANCE AND WITH BUILT SOFFIT WALL OPTION) MUST BE MIN. 9' -0" TO USE THIS OPTION) r X 4" OR 4" X 4" SOFFIT OPTION) PHYSICAL PROPERTY TEST METHOD UNITS TYPICAL VALUES HEAT DEFLECTION TEMP (ANNEALED) 0264 PSI STRESS FLAMMABILITY RATING UNDERWRITERS LAB ASTM D -648 UL 94 V -0 DEGREES F 155 PASSES - FRO p �T SERVICE COUNTER ELEVATION (TYPICAL) PI CAL) . !Z �.V l SEpVI C FIRE AND EXPLOSION H AZARD DATA FLASH POINT: 425•F, 218 a (COC) GENERAL NOTES (SEE 1, 2, 4 & 6) AUTOIGNITION TEMPERATURE: NO DATA FLAMMABLE LIMITS (STP): NO DATA REVISION: I A9 31 54" SLICING PIT WALL & ADDED SOAP DISPENSERS &Wd 80/0Z/ RED WALLCOVERING MOUNTING awd 6o /WE DATE: 10 -31 -08 DESIGNED BY: PATRICK ROSE DRAWN BY: PMR REVIEWED BY: PMR SCALE: NOT TO SCALE STORE MUST BE CONSTRUCTED AS DESIGNED IN THESE FLOOR PLANS SUBJECT TO FEDERAL, STATE AND LOCAL LAWS. RECIPIENT IS RESPONSIBLE FOR ENSURING COMPLIANCE WITH ALL LAWS. IF MODIFICATIONS ARE NECESSARY, PLEASE CONTACT DAMS STORE DESIGN DEPARTMENT FOR WRITTEN APPROVAL OF THE REQUIRED CHANGES. THIS DRAWING IS FURNISHED BY DOCTORS ASSOCIATES INC. (•DAI ") DB /A SUBWAY. RECIPIENT MUST DETERMINE IF THIS DRAWING MUST BE SUBMITTED TO A LICENSED ARCHITECT OR SIMILAR PROFESSIONAL UNDER FEDERAL, STATE OR LOCAL LAW. ANY CHANGES MUST BE APPROVED BY DAI. DO NOT SCALE DRAWING. WRITTEN DIMENSIONS TAKE PRECEDENCE OVER SCALED DIMENSIONS. AND SHALL BE VERIFIED IN THE FIELD BY THE GENERAL CONTRACTOR AND /OR FRANCHI SEE/OWNER. ANY DISCREPANCY IN OUGHT TO THE O DIMENSI S SHALL BE BROUGHT IMMEDIATE ATTENTION OF DAIS AREA DEVELOPMENT AGENT OR DESIGNATED FIELD REPRESENTATIVE. GENERAL CONTRACTOR ANDEACH GE THE N SUB - CONTRACTOR SHALL MAKE HIS OWN INSPECTIONS AND MEASUREMENTS, DAI AND SUBWAY SHALL NOT BE HELD RESPONSIBLE FOR THE ACCURACY OF DIMENSIONS AND FOR ERRORS AND OMISSIONS IN THE DRAWINGS IF WRITTEN CONFIRMATION HAD NOT BEEN RECEIVED BY DAIS STORE DESIGN DEPARTMENT. THIS DRAWING AND THE INFORMATIONAL CONTENT HERE OF IS THE CONFIDENTIAL PROPERTY DAI OF AND IS PROVIDED SOLELY FOR THE USE OF AUTHORIZED FRANCHISEES, THEIR AGENTS AND CONTRACTORS. RECIPIENT AGREES NOT TO REPRODUCE, COPY, USE OR TRANSMIT THIS DRAWING AND /OR ITS INFORMATIONAL CONTENT, IN WHOLE OR IN PART. OR TO ALLOW SUCH ACTION BY OTHERS, FOR ANY PURPOSE, EXCEPT WITH THE WRITTEN PERMISSION OF DAI ACTING FOR SUBWAY. RECIPIENT FURTHER AGREES TO SURRENDER THIS DRAWING AND ANY PERMITTED COPIES HEREOF UPON DEMAND. SHEET #: 1 of 4 ©2008 DOCTORS ASSOCIATES, INC. TYPICAL PENDANT FIXTURE INSTALLATION \ I- w O z w U NOTE: WHEN USING BOOTH SEATING A PENDANT LIGHT IS REQUIRED, IT SHOULD BE CENTERED WITH THE TABLE TOP. WHEN INSTALUNG PENDANT UGHTS, IN ANY APPLICATION, THEY SHOULD BE INSTALLED AT A HEIGHT OF 6' -6" [198.1cm] FROM THE FLOOR TO THE BOTTOM OF THE FIXTURE. IT IS RECOMMENDED THAT SEATS BE INSTALLED BEFORE THE PENDANT UGHTS TO ALLOW FOR PRECISE PLACEMENT ABOVE TABLE TOPS. COLORCOURT BOOTH (INCLUDING TYPICAL INSTALLATION OF PENDANT LIGHT) Co N CO •t CoN • td MANUFACTURER - PLYMOLD WALL AND ISLAND STYLE. BENCH LENGTH: 2- SEATER 23" [58.4cm] 3- SEATER /4- SEATER 42" [106.7cm] 5- SEATER /6- SEATER 59" [149.9cm] TABLETOP: 2- SEATER 24" X 23" [61cm X 58.4cm] 3- SEATER /4- SEATER 24" X 42" [61cm X 106.7cm] 5- SEATER /6- SEATER 24" X 59" [61cm X 149.9cm] TABLE TOP AND BENCH COLOR: FONT HILL PEAR (WILSONART #10745 -60) WITH BLACK DURA -EDGE E U 0 N') L.-11 1 0 N M � N 25 7/16" SQ. 164.6cm] �aa I 23" SQ. Is L58.4cm] Co co M [167.6cm] 24" y [61.0cm] 1 E U Co K) CA 66" MANUFACTURER - PLYMOLD COLOR: FONT HILL PEAR WITH BLACK DURA -EDGE ( WILSONART #10745 -60) NOTE: A "PENDANT STEM KIT' IS AVAILABLE THROUGH SPECIALTY STORE UGHT1NG FOR USE WITH HIGH CEIUNGS. AMBER PENDANT UGHT FIXTURE (REFER TO FLOOR PLAN FOR EXACT PENDANT FIXTURE SIZE AND PLACEMENT) DOUBLE HOLE TRASH /RECYCLE UNIT (OPTIONAL) SINGLE HOLE TRASH UNIT SINGLE HOLE TRASH UNIT PLYMOLD TRASH UNITS TYPICAL 60" BANQUETTE ARRANGMENT io M MANUFACTURER - PLYMOLD LENGTH SIZES: 24 ", 30 ", 44 ", 48 ", 60" & 66 ". UPHOLSTERED FABRIC COVERED. AVAILABLE COLORS: STINSON GRAND SIERRA -BLACK (363492) OR MORBERN CARRARA- BUCK(TUSCAN BROWN). OPTIONAL FABRIC SEAT PAD OR BANQUETTE BACK PAD: STINSON (70006) a CO M 12 1/2"--• [31.8cm] FROM TOP OF CHAIR RAIL MOLDING NO CHAIR RAIL MOLDING INSTALLED FOR ENTIRE LENTGH OF BANQUETTE WALL BENCHES 51" 30" I• U .i MANUFACTURER - PLYMOLD WALL AND ISLAND STYLE. BENCH LENGTH: 2- SEATER 23" / 4- SEATER 42" TABLETOP: 2- SEATER 30" X 33" / 4- SEATER 30" X 42" AVAILABLE IN RIGHT OR LEFT BENCH TABLE TOP AND BENCH COLOR: FONT HILL_ PEAR (WILSONART #10745-60) WITH BLACK DURA-EDGE COLORCOURT HANDICAP BOOTH Co Co i -QUENTIN WALL COVERING (ALL SIDES) NOTE: HANDICAPPED BOOTHS MUST BE SECURED TO THE FLOOR. a O M U N CO N iu 63" [160.0cm] It 24 " [61.0cm] "I Li_ MANUFACTURER - PLYMOLD WALL AND ISLAND STYLE. BENCH LENGTH: 2- SEATER 23" [58.4cm] 3- SEATER /4- SEATER 42" 106.7cm 5- SEATER /6- SEATER 59" [14 TABLETOP 2- SEATER 24" X'23 ". [61cm X 58.4cm] 3- SEATER /4- SEATER 24" X _ 61 cm X .106.7cm 5- SEATER /6- SEATER 24" . X 59" [61 cm X 149.9cm] TABLE TOP AND BENCH COLOR: FONT HILL PEAR (WILSONART #10745 -60) WITH BLACK DURA -EDGE CONTOUR; BOOTH O C) E U CO N MANUFACTURER - PLYMOLD TABLE TOP COLOR: FONT HILL PEAR (WILSONART #10745 -60) WITH BLACK DURA -EDGE VERTICAL TABLE LEG AT EACH CORNER. FRAME FINISH COLOR: BLACK WRINKLE 30" X 42" TABLE [76.2cm X 106.6cm] (30" [76.2cm] HIGH) FREE STANDING HANDICAP TABLE -26" X 26" [66cm X 66cm] FRAMED WALL ART NOTE: VERTICAL WALL ART CAN NOT BE USED ABOVE BANQUETTE WALL BENCH SEATING. 1 " 1 f1i1=11111'8 Tip 11.11117Trillilll11l1'11 f1t11111 20" X 24" TABLE QUEST CHAIR BANQUETTE [50.8cm X 61cm] WALL BENCH (30" [76.2cm] HIGH) FRONT ELEVATION - TYPICAL BANQUETTE WALL BENCH SEATING INSTALLATION AGAINST A FULL HEIGHT WALL -6" [15.2cm] COUNTER TOP HARDWOOD. PLANK WITH ROUTED. EDGES (STAINED MINWAX #235 CHERRY AND POLYURETHANED WITH MINWAX FAST' DRYING CLEAR SATIN) - G QUEST . CHAIR 20" X 24" TABLE [50.8cm X 61cm] (30" [76.2cm] HIGH) FRONT ELEVATION - TYPICAL BANQUETTE WALL BENCH SEATING INSTALLATION AGAINST A 48" HIGH DIVIDER WALL CO N u BANQUETTE WALL BENCH SEATING - I BANQUETTE WALL BENCH 51" 30" NOTE: HANDICAPPED BOOTHS MUST BE SECURED TO THE FLOOR. • a O K) MANUFACTURER - PLYMOLD WALL AND ISLAND STYLE. BENCH LENGTH: 2- SEATER 23" / 4- SEATER 42" TABLETOP: 2- SEATER 30" X 33" / 4- SEATER 30" X 42 " AVAILABLE IN RIGHT OF LEFT BENCH TABLE TOP AND BENCH COLOR: FONT HILL PEAR (WILSONART #10745 -60) WITH BLACK DURA -EDGE CONTOUR HANDICAP BOOTH TYPICAL SEATING ARRANGEMENTS NO CHAIR RAIL MOLDING INSTALLED FOR ENTIRE LENTGH OF BANQUETTE WALL BENCHES QUENTIN WALL COVERING COVEBASE OR BULLNOSE 5/8" DRYWALL 2" X 4" WOOD OR METAL FRAMING 10 1/4" [26cm] 10 1/4" [26cm] FROM TOP OF WALL BENCH E a C) . c co o. 0 SIDE ELEVATION - FULL HEIGHT WALL INSTALLATION QUENTIN WALL COVERING COVEBASE OR BULLNOSE QUEST CHAIR: (USE WITH 30 HIGH TABLES) BANQUETTE WALL BENCH SIDE ELEVATION - 48" HIGH DIVIDER WALL INSTALLATION QUEST BAR HEIGHT STOOL: (USE WITH 42" HIGH TABLES) MANUFACTURER PLYMOLD AVAILABLE WITH UPHOLSTERED AND DUp -A -SEAT OPTION. AVAILABLE SEAT PAD COLORS: STINSON GRAND SIERRA CROCUS 468479), SPICE (363497) AND SLATE (468482). FRAME COLOR: BLACK WRINKLE QUEST HAIR AND STOOL MANUFACTURER - PLYMOLD TABLE TOP COLOR: FONT HILL PEAR (WILSONART #10745 -60) WITH BLACK DURA -EDGE PLYMOLD : SPIDER BASE HAS 3" - COLUMN AND ADJUSTABLE LEVELERS. FRAME FINISH ' COLOR: BLACK WRINKLE 20" X 24" TABLE [50.8cm X 61cm] (30" [76.2cm] HIGH) 30" X 30" TABLE [76.2cm X 76.2cm] (30" [76.2cm] HIGH) 30" DIA. ROUNI1 TABLE [76.2cm DIA.] (18" [45.7cm] HIGH) 30" DIA. ROUND TABLE [76.cm DIA.] (42" [106.68cm] HIGH) FREE STANDING TABL 30" X 42" TABLE [76.2cm X 106.6cm] (30" [76.2cm] HIGH) WITH 4- CHAIRS 20" X 24" TABLE [50.8cm X 61cm] (30" [76.2cm] HIGH) WITH 2- CHAIRS 30" X 30" TABLE [76.2cm X 76.2cm] (30" [76.2cm] HIGH) WITH 4- CHAIRS 30" DIA. ROUND TABLE [76.cm DIA.] (42" [106.68cm] HIGH) WITH 3 -BAR HEIGHT STOOLS 30" DIA. ROUND TABLE [76.2cm DIA.] (18" [45.7cm] HIGH) WITH 2- UPHOLSTERED CHAIRS 20" X 24" TABLE [50.8cm X 61cm] (30" [76.2cm] HIGH) QUEST CHAIR 6" [15.2cm] COUNTER TOP HARDWOOD PLANK WITH ROUTED EDGES (STAINED MINWAX #235 CHERRY AND POLYURETHANED WITH MINWAX FAST DRYING CLEAR SATIN) BANQUETTE WALL BENCH 20" X 24" TABLE [50.8cm X 61cm] (30" [76.2cm] HIGH) QUEST CHAIR LIGHT- FIXTURE N M J L SIDE ELEVATION MANUFACTURER - PLYMOLD UPHOLSTERED FABRIC COVERED. AVAILABLE COLORS: STINSON GRAND SIERRA -BLACK (363492) OR MORBERN CARRARA-BUCK(11JSCAN BROWN) OPTIONAL FABRIC SEAT PAD OR BANQUETTE BACK PAD: STINSON (70006) UPHOLSTERED FURNITURE MANUFACTURER PLYMOLD COUNTER TOP COLOR: FONT HILL PEAR ( WILSONART #10745 -60) WITH BLACK DURA -EDGE 12" CANTILEVER. MINIMUM TWO CANTILEVERS PER COUNTER TOP. FRAME. FINISH COLOR: BLACK WRINKLE QUEST BAR HEIGHT STOOL FRONT ELEVATION Ci N "r CO' N QUEST CHAIR 12" CANTILEVER BRACKETS WAVE SOFFIT - UNDERSIDE STRAIGHT SOFFIT - UNDERSIDE WAVE SOFFIT SECTION STRAIGHT SOFFIT - SECTION 52" [132cm] of I e-L„ 3/8" THREADED CONNECTING ROD CANTILEVER INSTALLATION LIGHT FIXTURE 52" [132cm] ARMCHAIR 0 Ir r xwf WAVE SOFFIT - PLAN STRAIGHT SOFFIT - PLAN MANUFACTURER - TPC GROUP COLOR: FONT HILL PEAR LAMINATE ( WILSONART #10745 -60) LIGHTING: (4)120V PRE -WIRED PLUG' IN RECESSED 50 WATT HALOGEN LIGHT FIXTURES WITH CHROME EXTERIOR RINGS. INSTALLATION MOUNTING HARDWARE PRE - ATTACHED AT FACTORY. C MODULAR SOFFITS (OPTIONAL) LOVESEAT COUCH MANUFACTURER - PLYMOLD TABLE TOP COLOR: FONT HILL PEAR ( WILSONART #10745 -60) WITH BLACK DURA -EDGE PLYMOLD BOLT -DOWN TABLE BASE HAS 3" COLUMN. FRAME FINISH COLOR: BLACK WRINKLE U CO CO 0 r . QUEST BAR HEIGHT STOOL - WINDOW FRONT ELEVATION 28 3/4" [73cm] SUPPORT FOR 30" HEIGHT. 40 3/4" [103.5cm] SUPPORT FOR 42" HEIGHT. BOLT -DOWN TABLE BASE M U N CO N QUEST CHAIR BOLT -DOWN INSTALLATION UNTER TOP SEATING OPTION 1) QUENTIN WALLCOVERING OPTION 2) BUTTERNUT BRICK WALLCOVERING. UPPER 1 1/2" DECORATIVE TRIM MOLDING 12' ALTERNATING MAIZE TONE CITYSCAPE MURAL PANELS, A & B WITH EMPIRE TRIM - 9 (UPPER PORTION OF MAIZE TONE CITYSCAPE MURAL) LOWER 2 1/2" CHAIR RAIL MOLDING TUSCAN STUCCO WALL COVERING (CONTINUOUS ROLL) BUTTERNUT BRICK WALLCOVERING. (INSIDE BACK WALL OF BUILDOUT) ISOMETRIC 0 goo N OPTION 1) FONT HILL PEAR LAMINATE (WILSONART #10745 -60) OPTION 2) BLONDE PAINT (SHERWIN WILUAMS SW6128) OPTION 3) FIRED BRICK RED PAINT ( SHERWIN WILUAMS SW6335) y VARIES -AS PER PLAN i r PLAN VIEW BEVERAGE BUILDOUT (OPTIONAL) f °- W O co CO 0 C, z VARIES -AS 4 PER PLAN VARIES -AS PER PLAN BLONDE PAINT (SHERWIN WILUAMS SW6128) FRONT ELEVATION W 0 - BUTTERNUT BRICK WALL COVERING ON FACE OF SOFFIT � x5" / PER P LAN I I BUTTERNUT BRICK WALL COVERING ON FACE OF SOFFIT " » b VARIES -AS y5 1 PER PLAN 'I'I PLAN VIEW RECEIVED CITY OF TUKIMLA BLONDE PAINT ON ANGLED BRACKETS SEP 2 4 2009 ( SHERWIN WILUAMS SW6128) G SIDE ELEVATION - �c PERMIT CENTER OVEN ARCH SOFFIT (OPTIONAL) STORE MUST BE CONSTRUCTED AS DESIGNED IN THESE FLOOR PLANS SUBJECT TO FEDERAL, STATE AND LOCAL LAWS. RECIPIENT IS RESPONSIBLE FOR ENSURING COMPLIANCE WITH ALL LAWS. IF MODIFICATIONS ARE NECESSARY, PLEASE CONTACT DAI'S STORE DESIGN DEPARTMENT FOR WRITTEN APPROVAL OF THE REQUIRED CHANGES. THIS DRAWING IS FURNISHED BY DOCTORS ASSOCIATES INC. ('DAI") DB /A SUBWAY. RECIPIENT MUST DETERMINE IF THIS DRAWING MUST BE SUBMITTED TO A LICENSED ARCHITECT OR SIMILAR PROFESSIONAL UNDER FEDERAL, STATE OR LOCAL LAW. ANY CHANGES MUST BE APPROVED BY DAI. DO NOT SCALE DRAWING. WRITTEN DIMENSIONS TAKE PRECEDENCE OVER SCALED DIMENSIONS. AND SHALL BE VERIFIED IN THE FIELD BY THE GENERAL CONTRACTOR AND /OR FRANCHISEE/OWNER. ANY DISCREPANCY IN DIMENSIONS SHALL BE BROUGHT TO THE IMMEDIATE ATTENTION OF DAI'S AREA DEVELOPMENT AGENT OR DESIGNATED FIELD REPRESENTATIVE. THE GENERAL CONTRACTOR AND EACH SUB - CONTRACTOR SHALL MAKE HIS OWN INSPECTIONS AND MEASUREMENTS, DAI AND SUBWAY SHALL NOT BE HELD RESPONSIBLE FOR THE ACCURACY OF DIMENSIONS AND FOR ERRORS AND OMISSIONS IN THE DRAWINGS IF WRITTEN CONFIRMATION HAD NOT BEEN RECEIVED. BY DAI'S STORE DESIGN DEPARTMENT. THIS DRAWING AND THE INFORMATIONAL CONTENT HERE OF IS THE CONFIDENTIAL PROPERTY DAI OF AND IS PROVIDED SOLELY FOR THE USE OF AUTHORIZED FRANCHISEES, THEIR AGENTS AND CONTRACTORS. RECIPIENT AGREES NOT TO REPRODUCE, COPY, USE OR TRANSMIT THIS DRAWING AND /OR ITS INFORMATIONAL CONTENT, IN WHOLE OR IN PART, OR TO ALLOW SUCH ACTION BY OTHERS, FOR ANY PURPOSE, EXCEPT WITH THE WRITTEN PERMISSION OF DAI ACTING FOR SUBWAY. RECIPIENT FURTHER AGREES TO SURRENDER THIS DRAWING AND ANY PERMITTED COPIES HEREOF UPON DEMAND. T N N. N CO M O CNI ao c00 00 00 O O CO O leaft 0 P-1 o z z � U Q : cn ti REVISION: FRAMED PRINTS MOUNTING BEVERAGE BUILDOUT DETAILS C ADDED MODULAR SOF-FITS _... -. 3EVIEWED FOR ) DE COMPLIANCE OCT 0 9 2009 City of Tukwila BUILDING DIVISION DRAWN BY: PMR ©2008 DOCTORS ASSOCIATES, INC. LLI i- < 0 DATE: 10 -31 -08 DESIGNED BY: PATRICK ROSE REVIEWED BY: PMR SCALE: NOT TO SCALE SHEET #: 2of4 v . SIZE INLET/ OUTLET SIZE FLOW RATE G.P.M. [LP.M.] UPDATED ELECTRICAL SPECS ON REACH -INS Nd APPROX. WT. LBS. [KG] 8.6 DIMENSIONS IN INCHES [mm] WATER GAL. [L] GREASE LBS. [KG] 48.8 C 115/60/1 C/E F G 100* 2 [50] 4 [15] 3 [11] _ 8 r 4] 42 [19] 75.0 10 [254] 7 1/4: [184] 20 3/8 f 518] • 9 7/8 [251] 200* 7 [26] 5 [19] 14 [6] 53 [24] 11 1/4 [286] 8 1/8.' [206] 21 3/4 [552] 11 7/8 [302] 300* 10 [38] 6 [23] 20 [9] 66 [30] 11 3/4 [298] 8 1/4, [210] 25 1/8 [638] 14 [356] 400* 3 [75] 15 [57] 10 [38] [60] 30 [14] 40 [18] 83 •99 [38] [45] 13 3/8 [340] 15 [381] 9 11 3/8 [238] 3/4 [298] 27 1/8 [689] 30 [762] 16 3/4 [425] 17 1/4 [438] 500 20 [76] 16 600 25 [94] 21 [79] 50 [23] 124 [56] 17 [432] 12 1/2 [318] 32 1/4 [819] 19 7/8 [505] 700 35 [132: 30 [113_ 70 [32] 151 [68] 18 3/4 [476] 14 1/4 [362] 34 1/8 [867] 22 1/2 [572] 800 50 [189_ 40 [151 100 [45] 180 [82] 21 1/2 1 16 [4061 36 [914] 24 1/2 [622] REVISION: I AS 3174 UPDATED ELECTRICAL SPECS ON REACH -INS Nd 60/01/9 8.6 22.5 NR522SSS /0 115/60/1 10.7 48.8 NR803SSS /0 115/60/1 10.4 75.0 NF241SSS /0 115/60/1 12 22.5 N F522SSS /0 MODEL # VOLTS /HZ /PH AMPS. INTERIOR NR241SSS/0 115/60/1 8.6 22.5 NR522SSS /0 115/60/1 10.7 48.8 NR803SSS /0 115/60/1 10.4 75.0 NF241SSS /0 115/60/1 12 22.5 N F522SSS /0 115/60/1 12.4 48.8 *NF803SSS /0 115/60/1 15 75.0 DATE: 10 -31 -08 DESIGNED BY: PATRICK ROSE DRAWN BY: PMR REVIEWED BY: PMR SCALE: NOT TO SCALE TO BOTTOM OF HEADER - STD. SERIES: 61 1/2" (201.9cm) -74 SERIES: 7'4 1 /8" (223.8cm) -77 SERIES: 7'7 1/2" (232.4cm) - 78 SERIES: 78 1/2" (232.4cm) i i 1 NORLAKE WALK-IN 5' X 6', 6' X 6', 6' X 8' OR 8' X 6' REFRIGERATOR OR FREEZER WITH FACE THROUGH WALL TYPICAL ELEVATION DETAIL 2 3/4" - 45 SERIES: 6'0" (182.9cm) -STD. SERIES: 6'7" (200.7cm) -74 SERIES: 7'3 5/8" (222.6cm) - 77 SERIES: 7'7" (231.1cm) - 78 SERIES: 7'8" (231.1cm) NOTE: KLB = REFRIGERATOR. KLF = FREEZER. MODEL # KLB45 -CX -SUB KLB46 -CX -SUB KLB56 -CX -SUB KLB66 -CX -SUB KLB68 -CX -SUB KLB683 -CX -SUB KLB7446 -CX -SUB KLB7466 -CX -SUB KLB7468 -CX -SUB KLB74683 -CX -SUB KLB7746 -CX -SUB KLB7756 -CX -SUB KLB7766 -CX -SUB KLB7768 -CX -SUB * KLB77683 -CX -SUB * KLF45 -Cx KLF46 -Cx KLF56 -Cx KLF66 -CX * KLF68 -CX * KLF683 -CX KLF7746 -CX * KLF7756 -Cx KLF7766 -CX KLF7768 -CX KLF77683 -CX KLF7846 -CX * KLF7856 -Cx KLF7866 -CX KLF7868 -CX KLF78683 -CX rl NNE rlril•INIM r -- _ rs MI Mr - I NE r1•0•1•1�r I MAM r yes Besse sr MI MBA •l•11• . r = - - 11�)r _r_ 411111Lr.1.1 %]••1 - = =- r NMI snrs>I11ees'e ees�e - - - -- fir ---I U•1111•11•111•1 _ - - - r NMI IN r •r. HOMMOMMOK_ JIM INS MEMO =II MI NNW rirmoirlrmiicrrrlrfrf gollmner rous _ l 1 I l NMI Nil um U EMI � - - MN MOW Mill Ilk ' ' t91 PER DIMENSIONED FLOOR PLAN 1 THIS DRAWING APPLIES TO MODELS KLB AND KLF 56, 66, 68 AND 683 IN STD, 74, 77 AND 78 SERIES. REFER TO NORLAKE KOLD LOCKER SERIES REFRIGERATOR AND FREEZER DRAWINGS AND TABLE BELOW FOR EXACT DIMENSIONS OF UNITS. - J j j 4' (121.9cm) 4' (121.9cm) 5' (152.4cm) 6' (182.9cm) 8' (243.8cm) 6' (182.9cm) 4' (121.9cm) 6' (182.9cm) 8' (243.8cm) 6' (182.9cm) 4' (121.9cm) 5' (152.4cm) 6' (182.9cm) 8' (243.8cm) 6' (182.9cm) 4' (121.9cm) 4' (121.9cm) 5' (152.4cm) 6' (182.9cm) 8' (243.8cm) 6' (182.9cm) 4' (121.9cm) 5' (152.4cm) 6' (182.9cm) 8' (243.8cm) 6' (182.9cm) 4 ' (121.9cm) 5 ' (152.4cm) 6' (182.9cm) 8 ' (243.8cm) 6' (182.9cm) OPENING WITH GRILL OR LOUVRES (MIN. SIZE 15 "H. X 26 "W.) IN HEADER WALL RECOMMENDED FOR VENTILATION OF ROOF MOUNTED COMPRESSOR. F B 5' (152.4cm) 6' (182.9cm) 6' (182.9cm) 6' (182.9cm) 6' (182.9cm) 8' (243.8cm) 6' (182.9cm) 6' (182.9cm) 6' (182.9cm) 8 (243.8cm) 6' (182.9cm) 6' (182.9cm) 6' (182.9cm) 6' (182.9cm) 8' (243.8cm) 5' (152.4cm) 6' (182.9cm) 6' (182.9cm) 6' (182.9cm) 6 ' (182.9cm) 8' (243.8cm) 6' (182.9cm) 6' (182.9cm) 6' (182.9cm) 6 ' (182.9cm) 8 ' (243.8cm) 6 ' (182.9cm) 6 ' (182.9cm) 6' (182.9cm) 6 ' (182.9cm) 8 ' (243.8cm) A SIDE VIEW t C 26" (66cm) 26" (66cm) 26" (66cm) 26" (66cm) 26" (66cm) 26" (66cm) 26" (66cm) 26" (66cm) 26" (66cm) 26" (66cm) 26" (66cm) 26" (66cm) 26" (66cm) 26" (66cm) 26" (66cm) 26" (66cm) 26" (66cm) 26" (66cm) 26" (66cm) 26" (66cm) 26" (66cm) 26" (66cm) 26" (66cm) 26" (66cm) 26" (66cm) 26" (66cm) 26" (66cm) 26" (66cm) 26" (66cm) 26" (66cm) 26" (66cm) MODEL KLF66 or KLC66 SHOWN ABOVE D 59" (149.9cm) 66" (167.6cm) 66" (167.6cm) 66" (167.6cm) 66" (167.6cm) 66" (167.6cm) 78" (198.1cm) 78" (198.1cm) 78" (198.1cm) 78" (198.1cm) 78" (198.1cm) 78" (198.1cm) 78" (198.1cm) 78" (198.1cm) 78" (198.1cm) 59" (149.9cm) 66" (167.6cm) 66" (167.6cm) 66" (167.6cm) 66" (167.6cm) 66" (167.6cm) 78" (198.1cm) 78" (198.1cm) 78" (198.1cm) 78" (198.1cm) 78" (198.1cm) 78" (198.1cm) 78" (198.1cm) 78" (198.1cm) 78" (198.1cm) 78" (198.1cm) 26" (66cm) 26" (66cm) 26" (66cm) 37" (94cm) 37" (94cm) 37" (94cm) 26" (66cm) 37" (94cm) 37" (94cm) 37" (94cm) 26" (66cm) 26" (66cm) 37" (94cm) 37" (94cm) 37" ( 39" (99.1cm) 39" (99.1cm) 39" (99.1cm) 39" (99.1cm) 36 1/2" (92.7cm) 36 1/2" (92.7cm) 39" (99.1cm) 36 1/2" (92.7cm) 39" (99.1cm) 36 1/2" (92.7cm) 36 1/2" (92.7cm) 39" (99.1cm) 36 1/2" (92.7cm) 39" (99.1cm) 36 1/2" (92.7cm) 36 1/2" (92.7cm) F 441/2" (113cm) 44 1/2" (113cm) 44 1/2" (113cm) 48 1/4" (122.6cm) 48 1/4" (122.66cm) 48 1/4" (122.6cm) 44 1/2" (113cm) 48 1/4" (122.6cm) 48 1/4" (122.6cm) 48 1/4" (122.6cm) 44 1/2" (113cm) 44 1/2" (113cm) 48 1/4" (122.6cm) 48 1/4" (122.6cm) 48 1/4" (122.6cm) 44 1/2" (113cm) 44 1/2" (113cm) 48 1/4" (122.6cm) 48 1/4" (122.6cm) 59" (149.9cm) 59" (149.9cm) 48 1/4" (122.6cm) 59 (149.9cm) 48 1/4" (122.6cm) 59 " (149.9cm) 59" (149.9cm) 48 1/4" (122.6cm) 59" (149.9cm) 48 1/4" (122.6cm) 59" (149.9cm) 59" (149.9cm) NOTE: EACH DOOR SECTION REQUIRES SEPERATE 115/60/1 HOOK UP AND DRAWS 2.3 AMPS. *THESE SYSTEMS HAVE FAN MOTORS THAT REQUIRE SEPERATE 115/60/1 HOOK UP AND DRAW .75 AMPS. ABOVE SPECIFICATIONS FOR CEIUNG MOUNT SYSTEMS AND INDOOR USE ONLY. WALL MOUNT AND REMOTE COMPRESSORS AVAILABLE. SEE MANUFACTURER FOR DETAILS. ALL TO BE DIRECT WIRED. NSF APPROVED. UL USTING E- 486142 (REPORT #48). E.T.L APPROVED. CSA FILE 18542 -24. BUTTERNUT BRICK TEXTURED WALL COVERING COVE BASE G 14 7/8" (37.7cm) 14 7/8" (37.7cm) 147/8" (37.7cm) 14 7/8" (37.7cm) 14 7/8" (37.7cm) 14 7/8" (37.7cm) 14 7/8" (37.7cm) 14 7/8" (37.7cm) 14 7/8" (37.7cm) 0 14 7/8" (37.7cm) 14 7/8" (37.7cm) 14 7/8" (37.7cm) 14 7/8" (37.7cm) 14 7/8" (37.7cm) 14 7/8" (37.7cm) 14 7/8" (37.7cm) 14 7/8" (37.7cm) 14 7/8" (37.7cm) 14 7/8" (37.7cm) 22 7/8" (58.1cm) 22 7/8" (58.1cm) 14 7/8" (37.7cm) 22 7/8" (58.1 cm) 14 7/8" (37.7cm) 22 7/8" (58.1 cm) 22 7/8" (58.1 cm) 14 7/8" (37.7cm) 22 7/8" (58.1cm) 14 7/8" (37.7cm) 22 7/8" (58.1cm) 22 7/8" (58.1cm) -C L_ INTERIOR CU. FT. 77 105 137 168 231 231 123 196 270 270 123 137 196 270 270 77 105 137 168 231 231 123 137 196 270 270 113 149 184 256 256 TO BOTTOM OF HEADER -45 SERIES: 6'0 1/2" (184.2cm) -STD. SERIES: 6'7 1/2" (201.9cm) -74 SERIES: 7'4 1/8" (223.8cm) -77 SERIES: 7'7 1/2" (232.4cm) -78 SERIES: 7'8 1/2" (232.4cm) NORLAKE WALK-IN 4':X 5' OR 4' X 6 REFRIGERATOR OR FREEZER WITH FACE THROUGH WALL TYPICAL ELEVATION DETAIL FRONT VIEW VOLTS /HZ /PH 115/60/1 115/60/1 115/60/1 208 - 230/60/1 208 - 230/60/1 208 - 230/60/1 115/60/1 208- 230/60/1 208 - 230/60/1 208 - 230/60/1 115/60/1 115/60/1 208 - 230/60/1 208 - 230/60/1 208- 230/60/1 208- 230/60/1 208 - 230/60/1 208 - 230/60/1 208 - 230/60/1 208 - 230/60/1 208- 230/60/1 208 - 230/60/1 208 - 230/60/1 208 - 230/60/1 208 - 230/60/1 208 - 230/60/1 208- 230/60/1 208 - 230/60/1 208 - 230/60/1 208 - 230/60/1 208 - 230/60/1 THIS DRAWING APPLIES TO MODELS KLB AND KLF 45 AND 46 IN .45, STD, 74, 77 AND 78 SERIES. REFER TO NORLAKE KOLD LOCKER SERIES REFRIGERATOR AND FREEZER DRAWINGS AND TABLE BELOW FOR EXACT DIMENSIONS OF UNITS. J MINIMUM CIRCUIT AMPS 14.2 14.2 14.2 10.5 11.9 11.9 14.2 11.9 11.9 11.9 14.2 14.2 10.5 11.9 11.9 13.4 13.4 DEFROST 13.4 13.4 DEFROST 13.4 13.4 DEFROST 13.4 13.4 DEFROST 8.8 10.8 DEFROST 8.8 10.8 DEFROST 1.4 13.4 DEFR 8.8 10.8 DEFROST 13.4 13.4 DEFROST 8.8 10.8. DEFROST 8.8 10.8 DEFROST 13.4 13.4 DEFROST 8.8 10.8 DEFROST 13.4 13.4 DEFROST 8.8 10.8 DEFROST 8.8 10.8 DEFROST MANUFACTURER CLEARANCE SPECIFICATIONS: 11 l:is s>r,1r r r 7C�I MN - MI r s1: * '&ii.■rIe - EMI INS - -srre111•,1 tIIIIMIM•1tr •I<■IS sfelorlr -'- _IW MIN r leltia 0110 WIN 111411 sr r 1e01 •1111•1•11101111•1 NM MI NM BMW rs �rau Emssurriimmommiimmoir rowlrfvr O i •sis� rLrf® Otairilirefiral Wallinortsmilim o r it m r � ] � maw wain• No r r ®,1 Mow onlitoirli_ !s'1rfsrl •NNINTINIamese ° Isolsrl eslssell sTislrlie1I se�arlr]�rs s. sa sr r rs'. •11011100•01 rl110■�Ter sT �■�11srlsBSs sf ialle ls0110N __Il®is COVE BASE PER DIMENSIONED FLOOR PLAN TOTAL SYSTEM AMPS 11.7 11.7 11.7 8.7 10 10 11.7 10 10 10 11.7 CUT -OUT IN HEADER WALL FOR ROOF MOUNTED COMPRESSOR. REFER TO NORLAKE KOLD LOCKER SERIES TABLE BELOW FOR DIMENSION& NOTE: ADD MIN. 1/2" [1.3cm] TO ''E' DIMENSION FOR ADEQUATE CLEARANCE. E 8.7 8.7 8.7 10.7 10.7 8.2 8.2 9.1 9.1 8.2 9.1 8.2 9.1 9.1 8.2 9.1 8.2 9.1 9.1 DO NOT STORE BOXES ON THE TOP OF COOLER OR. FREEZER. STORED OBJECTS WILL OBSTRUCT AIR FLOW AND CAUSE VENTILATION PROBLEMS FOR THE REFRIGERATION SYSTEMS.. 24- CLEARANCE IS RECOMMENDED FROM TOP OF ROOF MOUNTED CAPSULE PAK REFRIGERATION SYSTEM TO CEILING FOR SERVICE PUROPOSES (6" MINIMUM). FRONT VIEW MODELS KLB683 AND KLF683 (STD, 77 & 78) SHOWN ABOVE MAXIMUM FUSE SIZE 20 20 20 15 15 15 20 15 15 15 20 20 15 15 15 20 20 15 15 15 15 15 15 15 15 15 15 15 15 15 15 NORLAKE KOLD LOCKER SERIES REFRIGEIWOR AND FREEZER BUTTERNUT BRICK TEXTURED WALL COVERING - a. 0 El Er U MODEL: CA33-RR12 ALUMINUM WELDED CONSTRUCTION HOLDS 12 FULL SIZE PANS (18" X 26") OR 24 HALF SIZE PANS (13" X 18") NSF APPROVED LOCKWOOD DECK RETARDER • MODEL: CA27-RR12 ALUMINUM WELDED CONSTRUCTION HOLDS 12 FULL SIZE PANS (18" X 26") OR 24 HALF SIZE PANS (13" X 18") NSF APPROVED LOCKWOOD REACH-IN RETARDER OPENING WITH GRILL OR LOUVERS (MIN. SIZE 15" H X 26" W) IN HEADER WALL RECOMMENDED FOR VENTILATION OF ROOF MOUNTED COMPRESSOR. le CLEARANCE IS RECOMMENDED ON BOTH SIDES OF THE WALL MOUNTED CAPSULE PAK FOR PROPER AIR FLOW *20 AMP FUSE IS REQUIRED. 35 1/8" [89.2cm] CNI NORLAKE REFRIGERATOR / FREEZER LEFT END ELEVATION THREE COMPARTMENT SINK WITH TWO 18 DR AINBOARDS SHOWN ABOVE. AVAILABLE WITH ONE, TWO, THREE OR FOUR COMPARTMENTS AND THREE COMPARTMENT CORNER SINKS ALSO AVAILABLE. 1/2" NPT WATER LINES. 2" DRAINS. UL AND C-UL LISTED. DUKE MANUFACTURING STAINLESS STEEL SINK cc ce 0 LNI CL 0 CD Csi 21 1/2" DEPTH MODEL: CA60-RR25 HOLDS 25 HALF SIZE PANS (13" X 18") MODEL: CA76-RR33 HOLDS 33 HALF SIZE PANS (13" X 18") *CA76-RR33 TO BE USED WITH 77 SERIES REFRIGERATOR. ALUMINUM WELDED CONSTRUCTION NSF APPROVED LOCKWOOD RETARDER CABINET 82 1/2" 84" 18" TYP. [45.7cm] [213.4cm] PLAN VIEW ALL SYSTEMS .-• CORD & PLUG -.SUPPLIED NSF. APPROVED - UL LISTING #SA3931 CSA LISTING 18542-23 SEE BELOW AVAILABLE SIZES ARE: INTERMETRO SHELVING SYSTEMS a tri Ti- IN 12"[30.5cm] INCREMENTS 30" [76.2cm] ELEVATION RIGHT END W111-1 GALVANIZED UNDERSHELF TABLES 96" AND LARGER HAVE SIX LEGS DRAWERS ARE OPTIONAL NSF APPROVED a DUKE STAINLESS STEEL WORKTABLE ICE0520 CUBER ON B42 STORAGE BIN (374 LBS. STORAGE CAPACITY) AIR-COOLED OR WATER COOLED. ELECTRICAL SPECIFICATIONS: DIRECT WIRED PER CODE (3 WIRES) AIR-COOLED: 115V/60HZ/1PH 18.3 AMPS (20 MAX FUSE) 8441 BTUH. WATER-COOLED: 115V/60HZ/1PH 13.5 AMPS (15 MAX FUSE) 8356 BTUH. PLUMBING SPECIFICATIONS: 3/8" 10mm FPT WATER IN 3/4" 19mm FPT WATER OUT 3/4" 19mm FP T BIN DRAIN (WATER-COOLED UNIT CONDENSER LINES): 3/8" (19mm) FPT CONDENSER WATER IN 1/2" (13mm) FPT CONDENSER WATER OUT NSF/ UL APPROVED ICE-O-MATIC ICE CUBER t 24" 30" t 24 1/2" [62.2cm] 34" [86.4cm] 0 co I 0 co co co a to CO Q-420 CUBER ON S-420 BIN TYPE: AIR-COOLED, WATER-COOLED ELECTRICAL SPECIFICATIOlia 115/60/1 20 AMP FUSE MIN. AIR-COOLED = 12.3 AMPS, WATER-COOLED = 11.4 AMPS WIRED DIRECT OR PER LOCAL CODE 220-240/50/1 ALSO AVAILABLE, SEE MANUFACTURER. PLUMBING SPECIFICATIONa 3 8" (0.95cm) F.P.T. WATER CONDENSER INLET (WATER-COOLED UNIT) 2" (1.27cm) F.P.T. WATER CONDENSER OUTLET (WATER-COOLED UNIT) NSF APPROVED/U.L #SA-4027/CSA LISTED MANITOWOC ICE CUBER GREASE INTERCEPTOR MANUFACTURER: ZURN INDUSTRIES MODEL: Z1170 22" [55.9cm] = WID11-1 OF BODY 31" [78.7cm] 0 d i " co 30" [76.2cm] ICE0500 CUBER (AIR-COOLED, WATER-COOLED OR REMOTE CONDENSER) ICE0606 CUBER (AIR-COOLED, WATER-COOLED OR REMOTE CONDENSER) ON B55 STORAGE ' BIN (556 LBS. STORAGE CAPACITY) ELECTRICAL SPECIFICATIONS: DIRECT WIRED PER CODE (3 WIRES) ICE0400: (AIR-COOLED) 115V/60HZ/1PH 14.4 AMPS (15 MAX FUSE) 8064 BTUH. (WATER-COOLED) 116V/6011Z/WN 13.4 AMPS (20 MAX FUSE) 8388 BTUH. ICE0500: (AIR-COOLED) 115V/60HZ/1PH 19.9 AMPS (20 MAX FUSE) 10843 BTUH. (WATER-COOLED) 115V/60HZ/1PH 13.7 AMPS (20 MAXFUSE) 10242 BTUH. (REMOTE) 115V/60HZ/1PH 18.7 AMPS (20 MAX FUSE) 10881 BTUH. (WATER-COOLED) 208-230V/60HZ/1PH 9.5 AMPS (15 MAX FUSE) 11473 BTUH. (REMOTE) 208-230V/60HZ/1PH 13 AMPS (15 MAX FUSE) 12269 BIlkl. PLUMBING SPECIFICATIONS: 3/8" 10mm FPT WATER IN 3/4" 19mm FPT WATER OUT 3/4" 19mm FPT BIN DRAIN (WATER-COOLED UNIT CONDENSER LINES): 3/8" (19mm) FPT CONDENSER WATER IN 1/2" (13mm) FPT CONDENSER WATER OUT NSF/ UL APPROVED ICE-O-MATIC ICE CUBER b09--.2-00 30" [76.2cm] Q-450 CUBER ON S-400 BIN TYPE: AIR-COOLED, WATER-COOLED, REMOTE. ELECTRICAL SPECIFICATIONS 115/60/1 20 AMP FUSE MIN. AIR-COOLED = 12.8 AMPS, WATER-COOLED = 11.9 AMPS REMOTE = 9.6 AMPS WIRED DIRECT OR PER LOCAL CODE 220-240/50/1 ALSO AVAILABLE, SEE MANUFACTURER. PLUMBING SPECIFICATIONS 3/8" (0.95cm) F.P.T. INLET, 1/2" (1.27cm) F.P.T. DRAIN 3/8" (0.95cm) F.P.T. WATER CONDENSER INLET (WATER-COOLED UNIT) 1/2" (1.27cm) F.P.T. WATER CONDENSER OUTLET (WATER-COOLED UNIT) NSF APPROVED/U.L. #SA-4027/CSA LISTED MANITOWOC ICE CUBER REVIEWED FOR CODE COMPLIANCE APPROVED City of Tukwila BUILDING DIVISION *100, 200, 300 AND 400 ARE STANDARD SUBWAY MODEL S . ENGINEERING SPECIFICATIONS: ACID RESISTANT COATED INTERIOR AND EXTERIOR FABRICATED STEEL. INTERNAL AIR RELIEF BYPASS. RECEIVED BRONZE CLEANOUT PLUG. REMOVABLE PRESSURE EQUALIZING/FLOW DIFFUSING INLET BAFFLE. FIXED BOTTOM OUTLET BAFFLE. VISIBLE DOUBLE WALL TRAP SEAL ZURN GREASE INTERCEPTOR Sr 4 2009 PERMIT CENTER NOTE: THESE DRAWINGS REPRESENT TYPICAL EQUIPMENT PURCHASED THROUGH DOCTOR'S ASSOCIATES INC. AND DOES NOT REPRESENT ANY EQUIPMENT PURCHASED LOCALLY BY THE FRANCHISEE/OWNER. OWNERS OF STORES OUTSIDE THE UNITED STATES AND CANADA MAY NEED ALTERNATE ELECTRICAL REQUIREMENTS. CONTACT YOUR DAI COORDINATOR OR THE MANUFACTURER FOR THE MODIFIED ELECTRICAL SPECIFICATIONS. STORE MUST BE CONSTRUCTED AS DESIGNED IN THESE FLOOR PLANS SUI3JECT TO FEDERAL, STATE AND LOCAL LAWS. RECIPIENT IS RESPONSIBLE FOR ENSURING COMPLIANCE WITH ALL LAWS. IF MODIFICATIONS ARE NECESSARY, PLEASE CONTACT DAPS SToRE DESIGN DEPARTMENT FOR WRITTEN APPROVAL OF THE REQUIRED CHANGES. THIS DRAVVING IS FURNISHED BY DOCTORS ASSOCIATES INC. ("DAI") D/B/A SUBWAY. RECIPIENT MUST DETERMINE IF THIS DRAWING MUST BE SUBMITTED TO A LICENSED ARCHITECT OR SIMILAR PROFESSIONAL UNDER FEDERAL, STATE OR LOCAL LAW. ANY CHANGES MUST BE APPROVED BY DAI. DO NOT SCALE DRAWING. VVRITTEN DIMENSIONS TAKE PRECEDENCE OVER SCALED DIMENSIONS. AND SHALL BE VERIFIED IN THE FIELD BY THE GENERAL CONTRACTOR AND/OR FRANCHISEE/OWNEFL ANY DISCREPANCY IN DIMENSIONS SHALL BE BROUGHT TO THE IMMEDIATE ATTENTION OF DAM AREA DEVELOPMENT AGENT OR DESIGNATED FIELD REPRESENTATIVE. THE GENERAL CONTRACTOR AND EACH SUB-CONTRACTOR SHALL MAKE HIS OWN INSPECTIONS AND MEASUREMENTS, DAI AND SUBWAY SHALL NOT BE HELD RESPONSIBLE FOR THE ACCURACY OF DIMENSIONS AND FOR ERRORS AND OMISSIONS IN THE DRAWINGS IF WRITTEN CONFIRMATION HAD NOT BEEN RECEIVED BY DAPS STORE DESIGN DEPARTMENT. THIS DRAWING AND THE INFORMATIONAL CONTENT HERE OF IS THE CONFIDENTIAL PROPERTY DAI OF AND IS PROVIDED SOLELY FOR THE USE OF AUTHORIZED FRANCHISEES, THEIR AGENTS AND CONTRACTORS. RECIPIENT AGREES NOT TO REPRODUCE, COPY, USE OR TRANSMIT THIS DRAWING AND/OR ITS INFORMATIONAL CONTENT, IN WHOLE OR IN PART, OR TO ALLOW SUCH ACTION BY OTHERS, FOR ANY PURPOSE, EXCEPT WITH THE WRITTEN PERMISSION OF DAI ACTING FOR SUBWAY. RECIPIENT FURTHER AGREES TO SURRENDER THIS DRAWING AND ANY PERMITTED COPIES HEREOF UPON DEMAND. LU C t 0 SHEET #: 3 of4 ©2008 DOCTORS ASSOCIATES, INC. 30 1/4" 33 3/8" . DRAWN BY: PMR POLYCARBONATE t 2" RECOMMENDED VOLUME EXISTING SODA / s /a. 3/8 SODA MACH. FOR HIGH USE AREA'S ..-.. i 2" •••••. \ 3�4 1 /2 HAND SINK 3/ 4" 3- SINK �B JANITORIAL ICE MACH COMP. 3 4" 1 2" 1 2" J /4 K . / I I p I I iii ELECTRIC WATER HEATER end 1/ • i 3/ � w.. - R TO ouT�IDE / W.C. \ \ SECOND RESTROOM IF LOCAL CODES REQUIRES INSTALAIION. f LAV.'\ 1 / „ GLASS „ 20 1/2 27 1/8 POLYCARBONATE / 36 1/2" INTERIOR DIMENSION S: [76.8cm] „ 26 1 /4 [84.7cm] 28 5/8 / " OVEN - 15 H X 26 1/4 W X 20 1/4 "D PROOFER -; 33 1/2 "H X 26 1/4 "W X 20 1 /4 "D DOOR SWING: -= [52cm GLASS -� [68 .8cm] / [72.8cm] 5 n 2 . [66.7cm] 6 1/4" - 3 1/2 " . 8.9cm [ ] 8 " " " « g /£ LS 1/4" 18 5/8" [47.3cm] ] . . [927cm] OVEN - 34 3/8 [20.3c PROOFER - 29 1 /2 n ELECTRICAL INLET 71 1/2" [181.6cm] I / I REMOVABLE / / 6cm-I [15.9cm] al [63.6cm] DOOR ... 1. BAKING CENTER` 1 I - , •••_. =-• WATER FILTER FOR AUTOMIST® �•�� J •l �� ioL•St l] 9 7/16" [23.9cm] ELECTRICAL INLET / e , ' d • � " F ' INLET WATER I, 2 9 3/8" 4 • g LOCKWOOD 2 2 7/8" ` POLY [58.1cm] [7 4.6c m CA72- RR12 -6 ] MO DEL _ I I A • I , „ u . , I N,.v „ : s' . � it O f� a I 8i I /� �I' 27 - (69.9cm] WATER � ` A - CARBONATE DOOR -NSF APPROVED / COMB! (OPENiENCLOSED) FRONT \ SIDE BACK ^ _ . F \ M q p II 22 7/8" 29 3/8" FONTHILL PEAR LAMINATE • • • 1 /2" BREAD CABINET [58.1cm] [74:6cm] HOT & COLD WATER SYSTEM 42 1/2" [108.0cm] Jor 9/9 I /4" MODEL CA57 -RR15 SIDE AND °, SIDES . . it < 1 t/2 D 1 t /2" \ l' so n I DRI 2 4 ' EXISTING 1 1/2" 3 -COMP. SINK • ■ I HAND SINK , i � � M AC 2" 2_. I I I 1 1 " 1 1 2" I / I- . S AN ITO - 3• . 3" VTR I �i I ��LAV W / I 2 "c. / I , \ 3" NOTE: THE PLUMBING REPRESENT AND ARE CODE REQUIREMENTS. "WATER SECOND RESTRO IF LOCAL CODES REQUIRES INSTALA11ON. � \ 1 • • ISOMETRICS SHOWN A TYPICAL "SUBWAY' STORE, SUBJECT TO ALL LOCAL Q SYSTEM IS TO BE PRESSURIZED" r ALUMINUM CONSTRUCTION. POLYCARBONATE DOOR AND BACK :WINDOWS: R FONTHILL PEA LAMINATE ON AND BACK _ "3 II / I �' 1 INLET � [w39'l9l] « Z /L LL " , , 1 SIDE r b - LOCKWOOD FRONTLINE BREAD DISPLAY CABINET • �u� LINE RATING - ELECTRICAL I - MODEL: I i �� .' i 1 u FRONT u REAR - SIDE MODEL: TSC - 6/18 PROOFER. IS 30 CODE TO BE HAS FRONT ELECTRICAL SPECIFICATIONS REAR SPECIFICATIONS SUB -123P 10 1/8„ 1 / 4" WATERLINE IS REQUIRED FOR PROOFER. WATER PRESSURE SPECIFICATIONS THE 1/4" WATER CONNECTION IS 30 25.7cm [ ] 1/4 WATERLINE IS REQUIRED FOR 1/4" MINIMUM WATER PRESSURE SPECIFICATIONS FOR THE 1/4" WATER CONNECTION psi. FIELD WIRING REQUIRED PER LOCAL UNIT IS SHIPPED FROM FACTORY HARDWIRED ON SITE. THE TSC -6/18 UL, CSA, ANSI, CE & WEEE LISTINGS. VOLTAGE FREQUENCY PHASE WATTS AMPS SHIP WT. MINIMUM FOR psi. WATTAGE: \ ELECTRICAL: _ [ wot , '99 ] 1 o 6 120V, 14 AMPS, 1700 TOTAL WATTS. VOLTAGE PHASE KILOWATTS NO. WIRES SHIP WT. 208 60 SINGLE 6650 32 650 LBS. 7/8" (58.1cm] '1" _ 4 D AMPS I, 29 3/8" [ i'r_� \ rlllfir 2 -WIRES PLUS GROUND 208 60 3P 6650 3201 650 LBS. 120/208 1 30 5.135 4 570 LBS. POLY I 1,22 VIII"` �I SERVICE RATES 120V, OVEN: FIELD UNIT HARDWIRED E TL 4000 - PROOFER: 1200 WIRING REQUIRED PER LOCAL CODE IS SHIPPED FROM FACTORY TO BE ON SITE. THE SUB -123P HAS CUS & NSF LISTINGS. �� II 240 50 & 60 SINGLE 7200 30 650 LBS. 120/240 1 27 5.135 4 570 LBS. �� I MIIIN�1 . SINGLE PHASE 15 AMP DEDICATED 240 60 3P 7200 30A1 650 LBS. 120/208 3 20 5.135 5 570 LBS. MODEL: CA7218SR CIRCUIT: REQUIRED. POWER NEMA 5P P CARBONATE DOUBLE DOORS NSF 380 -415 50 3N 7200 301.2 650 LBS. 120/240 3 17 5.135: ' 5 570 LBS. LOCKWOOD COMPANIO N N" ENCLOSED _ DUKE TSC -6/18 DIGITAL BREAD OVEN /PROOFER NU -VU SUB -123P DIGITAL BREAD'OVEN /PROOFER BREAD CABINET j L _ - 20- 90psi. MODEL SUPPLIED WI A " MALE FLARE FITTING. LOCATION 60" 24 ",36 ",48 ",60 ",72" ",36 ",48 ",60 ",72" - MODEL RC -', 21318 £ 48" / 1 24 [121.9cm] [152.4cm] 1 61 cm,91:4cm, [ 121.9cm, 152.4cm,182.9cm]` [6lcm,91.4cm,121.9cm, 152.4cm,182.9cr 9 19 13/11, [ REQUIRES MIN. 1GPM WATER FLOW: • UL LISTED. NSF APPROVED. I « t , /£ SZ ' [ w317 " 99 ] - - 14 3/16 DEEP [36;Ocm] FOR USE WITH DUKE REFRIGERATED BACK COUNTER. ALUMINUM WELDED CONSTRUCTION HOLDS HALF SIZE PANS I « Z/ L 6Z [w - - [wo617L] « Z/ l 6Z , « Z/ L 6Z \ [w «G /L : - 06 \ [74.9cm] CUT -OUT IN TOP FOR DROP -IN SODA MACHINE (MADE BY MFR.) REFER To MFR. R OF SODA MACH. FOR EXACT DIMS. - DIA. DRAINAGE &.VENT SYSTEM �� • : • �� 2 12 " (13 X 18„ ) \ 5,. 23 3/8" 4, 12 3/8" 26 " is ^ E r) „ 23 cc C l N E 7 c � ,�• [59.3cm] [31.4cm] \ NSF APPROVED [66.0cm] I T f ,_ [58.4cm] - DUKE RETARDER t;: ABINET BUNN INFUSION ITCB BREWER PLAN VIEW TOP. PLAN VIEW COMPRESSOR LOCATION PLAN VIEW SINK SHOWN AVAILABLE) AVAILABLE ANGLE: AT \ OPTIONAL: DROP A OR TO HOLD SIDES -S -IN SODA LEFT SIDE IN 35 1/2" PLAN VIEW « 1/£ 6Z [75.5cm] 27 1/2" , 13 5/8" , L [w00' L9] 1 [w « 9L / LL t7Z • [u > _ E N O a E c i E OPTIONAL: c i (RIGHT o HAND O LEFT HAND HAND SINK ALSO SINK IS ALSO 90 DEGREE CUT -OUT IN TOP FOR MAY BE ON RIGHT ALSO AVAILABLE [90.2cm] DEPTH. , _ N. ^ [woL'££] «t,/ L £ 10ZZ -21 dNNHS I - - J 1 [34.6cm1 1 «t /lit [woZ•g£] « 9£ [wot'L6] - - - [w ot' L6 L - - - \ _ 1 «9£ ' [ 2 3 " DIA. /4 - -� I -- / \\ / X / \ / \ I - - - - 2 M 5/8" [54 9cm] 19 M 13/16" [50.3cm] fwo E d d l AMANA SHARP R -22GT SHARP R -22GT PLAN VIEW LAN W w ` PLAN VIEW - In I [wog - g] 20 1/8" [51.1cm] 18 1/2" [47.0cm] RFS12SW2 SHARP R - 22GT WATTS 120 VOLT 60 HERTZ 2000 WATTS 20 AMPS :' MHz L J L J - - -- ELECTRICAL CHARACTERISTIC! ELECTRICAL CHARACTERISTICS: COOKING POWER: 1200 WATT COOKING POWER: 1200 POWER REQUIRED: 120 VOLT POWER REQUIRED: 60 HERTZ : (It; 2000 WATTS ® 20 AMPS PLUG TYPE: 5 -20 PLUG TYPE:. 5 -20 POWER CORD: 5' (1.5M) POWER CORD:. 5 (T.5M) FREQUENCY: 2450 MHz FREQUENCY: 2450 SAFETY STANDARDS: SAFETY STANDARDS: NSF, UL, CSA UP, FCC, DHHS, NSF 13 1/2" 15 5/16" 1-1 [ w.9.9S ] N I I I I I I I► I� I I IT I I I► I I L I « £Z . " « 6 L [woV9S] - I I ,® _ co re) a '--' [wo£'9i'- ELEVATION ON DOORS STEEL UL -S LISTED RIGHT END \ FONT 120/60/1, ELEVATION ON DOORS STEEL TOP. AND UL -S LISTED SPECIFICATIONS RIGHT END ` PEAR ELEVATION COUNTER AVAILABLE. WITH STAINLESS LISTED RIGHT END [ MANUFACTURER: [38.9cm] IN PLASTICS, INC. ON TOP OF RISER R CLEAR ACRYLIC HAS 4 REMOVABLE SHELVES _ 0000 11 6 t i FONT HILL PEAR LAMINATE WITH STAINLESS UL. C -UL AND ELECTRICAL SPECIFICATIONS AND SIDES HILL PEAR LAMINATE WITH STAINLESS UL, C -UL ELECTRICAL AND SIDES #5 -15) FONT HILL OPTIONAL; REINFORCED TOP SODA MACHINE ON DOORS AND C-UL AND UL TOP STEEL TOP. ADVANCED DISPLAYS COOKIE DISPLAY CASE SUBWRAP /NAPKIN MADE OF 1/4" THICK COOKIE DISPLAY CASE ` MOUNTED. LAMINATE UL, 4 N a � U ELEVATION 120/60/1, 3.8 AMPS. 6' CORD & PLUG (NEMA #5 -15) 6 AMPS. 6' CORD & PLUG (NEMA 2,4- U E N O u ELEVATION 48" DUKE REFRIGERATED BACK BAR 60" DUKE REFRIGERATED BACK BAR DUKE BACK COUNTER MICROWAVE OVEN COOKIE DISPLAY CASE ' 25" 60" 60" 61" - (4) SAN JAMAR E -Z FIT CUP DISPENSERS IN TOP (61" AND 73" CASH UNITS ONLY: 49' AND 37" CASH .UNITS CUP DISPENSERS ARE BELOW COUNTER ON EMPLOYEE SIDE)) '' 1a• x 17• ELEVATED P OS/TOUCH PAD SHELF - 60 3 3 2" / 2.25" HIGH BACK SPLASH ON BACK AND BOTH ENDS HINGED DOORS 38" [83.5cm] HOT FO UNIT [152.4cm] [152.4cm] [154.9cm] PAN UNIT COLD PM UNIT FUNCTIONALITY VIM CASH URR CUP DISPENSERS _ .% •)O = N - N E - � j [96.5cm] 27 b/16 1" I� B _ o o - I J I E D_ v V) u7 N V CO [69.4cm] 2.5Cm o = ° ° ° o ° = = o o o :o REVIEINEC ODE COME OC T 09 r4) . --R E c O , [152.6Cm] / 2.562" X 6.031" OB HOLE WI/PLASTI A J °� « i7£ [w0 L'Z6] 00R «9Z I ' [wot u [wol•LL] I, 03 ri f «9£ g L in p v u 12X12 TO CUTOUT 5" WIDE r7 DRIP TROUGH LEFT END • • �I� .. O O • I r LEFT END 0 POLY CARVING BOARD z1 TITTAIIN PaNSOARD FOR our �, 6" DEEP FOOD PMS LIFT UP DAY COVER POLY CARVING BOARD S�' x qU koR DUKE a OVER COVER pi Pp � = 0 io r,^ 16" T OR ONADO 2 MICROWAVE /CONVECTION OVEN C� of Tu 402S VERSION 3 MICROWAVE /CONVECT101 �I .DING D PLAN VIEW ,m ram A 9� .- N. E } f " p o ° m [4Q.6Cm] ' - - I r 25" FIXED 60" 60" LIFT UP DAY 6" DIA. TRASi HOLE = _ E v N LEGS 1 #14 GA. PAINTED RIGHT END MULTI -SPEED CONVECTION BLOWER WITH CONTROLLED BOTTOM BROWNING ELEMENT. STAINLESS STEEL FRONT, TOP, AND BACK. ARE BLACK POWDER COATED. ELECTRICAL: INDEPENDENTLY SIDES PANELS 6700 - WATTS) 3500 WATTS) OVEN MICROWAVE ACCELERATED HIGH MULTI -SPEED IMPINGED HOT AIR OVEN. STAINLESS STEEL FRONT, TOP, SIDES AND BACK. ELECTRICAL; DAY COVER FLUORESCENT LIGHTING FLUORESCENT G ABOVE COLD PANS ABOVE COLD PANS ^ 0 M cv STEEL K ICKPLATES w/ ADJUSTABLE FEET 5/ 8 DIA. X 6 HIGH GALV. ELEVATION -' ' N _ r) N am �I /�• c Li ,� _ � MI n N � ' � ^ E '�? -a RO �� i I \ .. \ i � _ \\ / \ j/ \\ / �i o in .� \\ / \ � � V </ 208/240 VAC, 60 HZ, 1 PH. 60HZ, & 50HZ AVAILABLE 208 , , . (220V, , / ( ) NAMEPLATE RATING 30 AMP PLUG /CORD: NEMA 6- 30P/6 SJTOW MAX INPUT: 6250 WATTS RECEIVED MICROWAVE OUTPUT: 1500 WATTS LI C%1Y OF TU CERTIFICATIONS: NSF, CSA, FCC SEP 2 4 2009 PERMIT GENT MERRYCHEF RAPID COOK OVEN 208/240 VAC, 60 HZ, 1 PH. (220V AVAILABLE) NAMEPLATE RATING 30 AMP PLUG /CORD: NEMA 6 - 30P/5'[1.5M], HO7RN-F (220V: IEC 309, 3 -PIN, 32 AMP MAX INPUT: 5990/6675 WATTS All MICROWAVE INPUT: 3500 WATTS )220V: CERTIFICATIONS: UL, cUL, NSF, FDA, FCC TURBOCHEF RAPID COOK C� SUB- BEVDEST -60L SHOWN ABOVE. A VAILABLE IN THE FOLLOWING LENGTHS: n 122.2cm , 60 3/32 ,, [152.6cm], 48 3/32 72 3/32" [183.1cm], 84 1/8" [213.7cm]. FINISH: FONT HILL PEAR LAMINATE SIDE AND DOORS WITH STAINLESS STEEL TOP. UL C -UL AND UL -S LISTED. 1 = c0 M ^ v �• • L 1 ' ' 1 I _ _ 1 -_ I II I L 1 L J CLEAR FOR SAFE 21 1 /8 ^ _ E �r R , ^ E 6 N. ' PLAN VIEW ^-� FUNCTIONALITY SHELVING FUNCTIONALITY SHELVING IF-0' CORD 1. (KMA /6-16) , '-a Cann s PWO (NflU /6-16) , �_ I _ � t N. ,M - A - - + - +a 1' , [53 DUKE BEVERAGE DESTINATION CENTER Imo 1111W _\III !Mill lu >, l - , [II LOCATION (1) 5 -15 SINGLE OPTIONAL OUTLET. OF ONE 120V OUTLET. COM�1PRES COMPRTMEN W�REMOVABLE SOR H USING A 1/3 CONDENSING UNIT OCATION O ON OF OPTIONAL FIELD INSTALLED OUTLET. LOCATION SHIPPED W/ BLANK COVER FIELD INSTALLED SHIPPED T LOCATION OF ONE (1) COMPRESSOR S.S, A GRILL 5 -15 120V SINGLE OUTLET. W[REMOVABLE HP 120 HOOUSING A EMPLOYEE SIDE C ONDENSING OF OPI110NAL OUTLET W/ BLANK COVER COMPARTMENT S.S. GRILLE 1/3 HP 120 UUNIT (2 5 -15 120V DUPLEX OOuUTLETS. AND (2g BLANK CASH UNIT END VIEW r OUTLET UNDERNEATH OUTLt :T UNDERNEATH ULTRA SLIMLITE y 21 " REMOVABLE THERMOSTATIC HOT FOOD WELL CONTROL W/ OMNI LIGHT LOCATION OF FIELD INSTALLED 19 3/4 3/4" 53.3cm [ ] FOR EXPANSION RAIL FINISH \ MANUFACTURER: DISTRIBUTED SIZES MOUNTS ELEC 2' 4' 8' MULTIPLE AND „ TRANSLITE SONOMA BY: SPECIALTY LIGHTING AVAILABLE: 2', 4' AND 8' SHOWN) , ON TOP OF MENUBOARD. ) SPECS: FIXTURE USES 1 - F14T5 BULB, 120V/.16A OR 277V/.07A FIXTURE USES 1: - F28T5 BULB, 120V/.28A OR 277V/.12A FIXTURE USES 2 - F28T5 BULBS, 120V/.55A OR 277V/.23A FIXTURES ON THE SAME WALL TO BE DAISY CHAINED REQUIRES ONLY A SINGLE OUTLET. [50.2cm] \ OC�nOnnnn o I----. _ s T 8 \ n c L W 3 g . L i' ] - _ - = I I I I I [wo _ - ^ [wo9'Lt] 1 • . • • • i = R \ r) co R 12 3/4" \ I I d SHIPPED W/ BLANK COVER n 17'-2" WITH STANDARD 4" WIDE PURSE UGHTS AND BIRNBAUM T5 FLUORESCENT LIGHT T5 FLUORESCENT LIGHT „ 3 2 v I Op [523,2cm] Q 1/2 STEM TYP. ` DOUBLE PANEL TOP \ SINGLE . PANEL TOP SLIMLITE ` 0 0 I I L cci E o ,w E § N rOi Ti 0 M Cd I 4' UL SLIMLITE / - 2 ' ULTRA 'LL] I I r 141 2" DEEP _ r-R VGS MENUBOARD ,-, MANUFACTURER: VGS [40.6cm] \ L JL JL J ■ « 91. /S - 17Z [w L « 9l /£ 9Z «9 L/S iZ [ wog-99] [ 1113 9 - L9] « 9l /£ 9Z ^ 1 3/8' D P 1 44.1 cm] \ 5" DEEP \ (20" [50.8cm] DEEP W/ CONTROL PANEL) TACC ILA CASH CONTROLLER POWER REQUIREMENTS: 1 0V AC OR 220V 50 CYCLE DEDICATED CIRCUIT ^ E 38 5/8" •4 c «9 u3Z•9L] [w3Z'S LEFT LENS RIGHT RIG i . cm M [98.1cm] M ,- �� BD 1512 QUICK DROP CS 2820 CASH CONTROLLER • r) `-' C'S9 Z - � • r.r \ 8 PANELS (FOUR 2 PANEL UNITS) 6 u r"+ N N � •••,-,... N MEASURES 24 1/2" X 197" INSERT 1�2HIGH X 22 -1/2" WIDE SIZE: r, C4 VISIBLE AREA: °R 21 - 1 /2 HIGH X 21 -5/8" WIDE FACELIFT PANEL (FLAT DIMENSION): 24 -1/2" HIGH X 49 -1/4" WIDE X 3 -1/4" DEEP N -, M PG KICKPLA PAINTED ; ° o , 10 0 010 u I -� U I u BLACK ON (4) SIDES 4 0 1 f.� ( ®!�■ -` � CUSTOMER SIDE HOT FOOD END VIEW C.S.S. c+ �+ C.S. S" SAFES TIDEL SAFE -SHOWN ABOVE 17'-2" FRONT COUNTER W/ LEFT HAND 25 "[83.5cm ] HOT FOOD UNIT, ELECTRICAL SPECIFICATIONS ` n . ` \ ` 3 (2) 60 "[152.4cm] COLD PAN UNITS AND 61 "[164.9cm] CASH UNIT. -HOT FOOD UNIT: 120/60/1, 4.5A OR 220/50/1 3.5A. / 24 5/8 24 5/8 / I, 24 NOTE: THESE DRAWINGS REPRESENT TYPICAL EQUIPMENT PURCHASED THROUGH DOCTOR'S ASSOCIATES INC. AND DOES NOT REPRESENT ANY EQUIPMENT PURCHASED LOCALLY BY THE FRANCHISEE/OWNER. OWNERS OF STORES OUTSIDE THE UNITED STATES AND CANADA MAY NEED ALTERNATE ELECTRICAL REQUIREMENTS. CONTACT YOUR DAI COORDINATOR OR THE MANUFACTURER FOR THE MODIFIED ELECTRICAL SPECIFICATIONS. -LEFT HAND AND RIGHT HAND WARMER UNITS AVAILABLE. -CASH UNIT LENGTHS AVAILABLE: 73 "[185.4cm] 61 "[154.9cm] 49 "[124.5cm] 37 "[94.Ocm] 750 WATTS. -COLD PAN UNITS: 48" & 60" UNIT: 1 /3HP, 120/60/1, 8.5A OR 220/50/1, 3.8A 74" & 86" UNIT: 1 /4HP - 500 WATTS, 120/60/1, 8.5A OR 220/50/1, 4.5A [62.5cm] [62.5cm] � [62.5cm] 49 1/4" \ 4 5/8 NOTE: 37" AND 49" CASH UNIT EACH HAVE A SMALL SAFE OPENING OF 13 3/16133.5cm] X 16 1/4" [41.2cm]. -COLD PAN UNIT LENGTHS AVAILABLE 86 "[218.4cm] 74 "[188.0cm] 60 "[152.4cm] 48 "[121.9cm]. -HOT FOOD UNIT LENGTHS AVAILABLE 61 "[154.9cm] 49 "[124.5cm] 37 "[94.0cm] 25 "[83.5cm]. -6 ELEC. OUTLETS BUILT INTO CASH UNIT FOR COLD PANS, HOT FOOD UNIT, POS POWER CONDITIONER, PRINTER, ETC. (NEMA #5 -15) - ELECTRICAL CONNECTIONS MUST COMPLY WITH LOCAL AND STATE CODES. / [125.1cm] S DOUBLE PANEL FRONT SINGLE PANEL FRONT [11.7cm] - EXTENSIONS TO HOT FOOD, CASH UNITS AND CASH /BEVERAGE END UNITS AVAILABLE -NSF AND ULS APPROVED SIDE AT 12 "[30.5cm] 24 "[61cm] 36 "[91.4cm] 48 "[121.9cm] 60 "[152.4cm] AND 72 "[182.9Cm]. - EXTENSIONS WITH ADDITIONAL CASH DRAWER ALSO AVAILABLE). -C -UP AND UP LISTED DUKE FRONT COUNTER VGS MENUB WITH ULTRA SLIMLITE REVISION: I AS DRAWN BY: PMR ADDED DUKE DIGITAL BREAD OVEN /PROOFER awd 60/Z2 UPDATED ELECTRICAL FRONT COUNTER INFO L effild 60/91iI ADDED BREAK RACK OPTIONS dwd 60/i i/S ADDED BUNN TEA & COFFEE BREWER end 60-62 -9 DATE: 10 -31 -08 DESIGNED BY: PATRICK ROSE DRAWN BY: PMR REVIEWED BY: PMR SCALE: NOT TO SCALE STORE MUST BE CONSTRUCTED AS DESIGNED IN THESE FLOOR PLANS SUBJECT TO FEDERAL, STATE AND LOCAL LAWS. RECIPIENT IS RESPONSIBLE FOR ENSURING COMPLIANCE WITH ALL LAWS. IF MODIFICATIONS ARE NECESSARY, PLEASE CONTACT DAI'S STORE DESIGN DEPARTMENT FOR WRITTEN APPROVAL OF THE REQUIRED CHANGES. THIS DRAWING IS FURNISHED BY DOCTORS ASSOCIATES INC. CDAI ") D/B/A SUBWAY. RECIPIENT MUST DETERMINE IF THIS DRAWING MUST BE SUBMITTED TO A LICENSED ARCHITECT OR SIMILAR PROFESSIONAL UNDER FEDERAL, STATE OR LOCAL LAW. ANY CHANGES MUST BE APPROVED BY DAI. DO NOT SCALE DRAWING. WRITTEN DIMENSIONS TAKE PRECEDENCE OVER SCALED DIMENSIONS. AND SHALL BE VERIFIED IN THE FIELD BY THE GENERAL CONTRACTOR AND /OR FRANCHISEE/OWNER. ANY DISCREPANCY IN DIMENSIONS SHALL BE BROUGHT TO THE IMMEDIATE ATTENTION OF DAI'S AREA DEVELOPMENT AGENT OR DESIGNATED FIELD REPRESENTATIVE. THE GENERAL CONTRACTOR AND EACH SUB - CONTRACTOR SHALL MAKE HIS OWN INSPECTIONS AND MEASUREMENTS, DAI AND SUBWAY SHALL NOT BE HELD RESPONSIBLE FOR THE ACCURACY OF DIMENSIONS AND FOR ERRORS AND OMISSIONS IN THE DRAWINGS IF WRITTEN CONFIRMATION HAD NOT BEEN RECEIVED BY DAI'S STORE DESIGN DEPARTMENT. THIS DRAWING AND THE INFORMATIONAL CONTENT HERE OF IS THE CONFIDENTIAL PROPERTY DAI OF AND IS PROVIDED SOLELY FOR THE USE OF AUTHORIZED FRANCHISEES, THEIR AGENTS AND CONTRACTORS. RECIPIENT AGREES NOT TO REPRODUCE, COPY, USE OR TRANSMIT THIS DRAWING AND /OR ITS INFORMATIONAL CONTENT, IN WHOLE OR IN PART, OR TO ALLOW SUCH ACTION BY OTHERS, FOR ANY PURPOSE, EXCEPT WITH THE WRITTEN PERMISSION OF DAI ACTING FOR SUBWAY. RECIPIENT FURTHER AGREES TO SURRENDER THIS DRAWING AND ANY PERMITTED COPIES HEREOF UPON DEMAND. FOR NCE ED au cw VIeION R SHEET #: 40f4 ©2008 DOCTORS ASSOCIATES, INC.