HomeMy WebLinkAboutPermit D11-369 - SIMMCO - REROOF69N ICI
S AM
TLVNIfJ}IVJftsI ISVa TF8OT
ODJkJfttIS
City okukwila
•
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206 -431 -3670
Inspection Request Line: 206 - 431 -2451
Web site: http: / /www.TukwilaWA.gov
DEVELOPMENT PERMIT
Parcel No.: 0323049066
Address: 10831 EAST MARGINAL WY S TUKW
Suite No:
Project Name: SIMMCO
Permit Number: D11 -369
Issue Date: 11/29/2011
Permit Expires On: 05/27/2012
Owner:
Name: SEAWASH PROPERTIES LLC
Address: C/O JSH PROPERTIES INC , 10655 NE 4TH ST STE 901 98004
Contact Person:
Name: PEARLLA KAESTNER
Address: PO BOX 82894 , KENMORE WA 98028
Contractor:
Name: ASSOCIATED ROOFING INC
Address: PO BOX 82894 , KENMORE, WA 98028
Contractor License No: ASSOCRI16206
Phone: 206 364 -4445
Phone:
Expiration Date: 05/06/2012
DESCRIPTION OF WORK:
TEAR OFF EXISTING ROOFING. INSTALL 1/2" PE.111 ; COVERBOARD AND INSTALL BASE SHEET. INSTALL GRANULAR
SURFACED MODIFIED BITUMEN ROOF SYSTEM.
Value of Construction: $169,520.00
Type of Fire Protection:
Type of Construction:
Electrical Service Provided by: SEATTLE CITY LIGHT
Fees Collected: $3,386.01
International Building Code Edition: 2009
Occupancy per IBC:
* *continued on next page **
doc: IBC -7/10
D11 -369 Printed: 11 -29 -2011
Public Works Activities:
Channelization / Striping: N
Curb Cut / Access / Sidewallc / CSS: N
Fire Loop Hydrant: N Number: 0
Flood Control Zone:
Hauling:
Land Altering:
Landscape Irrigation:
Moving Oversize Load:
N
Start Time:
Volumes: Cut 0 c.y.
Size (Inches): 0
End Time:
Fill 0 c.y.
Start Time: End Time:
Sanitary Side Sewer:
Sewer Main Extension: Private: Public:
Storm Drainage:
Street Use: Profit: N Non - Profit: N
Water Main Extension: Private: Public:
Water Meter:
N
Permit Center Authorized Signature:
Date: ! (/� 7/(/
I hereby certify that I have read and examined this permit and know the same to be true and correct. All provisions of law and ordinances
governing this work will be complied with, whether specified herein or not.
The granting of this permit does not presume to give authority to violate or cancel the provisions of any other state or local laws regulating
construction the performance of work. I am authorized to sign and obtain this development permit and agree to the conditions attached
Signature: ' (///./ Date: /1/Zq//1
to this permit.
Print Name:
tvga Ko.e) v
This permit shall become null and void if the work is not commenced within 180 days from the date of issuance, or if the work is suspended
or abandoned for a period of 180 days from the last inspection.
PERMIT CONDITIONS:
1: ** *BUILDING DEPARTMENT CONDITIONS * **
2: No changes shall be made to the approved plans unless approved by the design professional m responsible charge and the
Building Official.
3: All permits, inspection records, and approved plans shall be at the job site and available to the inspectors prior to
start of any construction. These documents shall be maintained and made available until final inspection approval is
granted.
4: All mechanical work shall be inspected and approved under a separate permit issued by the City of Tukwila Permit Center
(206/431- 3670).
5: All construction shall be done in conformance with the approved plans and the requirements of the International
Building Code or International Residential Code, International Mechanical Code, Washington State Energy Code.
6: Remove all demolition rubble and loose miscellaneous material from lot or parcel of ground, properly cap the sanitary
sewer connections, and properly fill or otherwise protect all basements, cellars, septic tanks, wells, and other
excavations. Final inspection approval will be determined by the building inspector based on satisfactory completion of
doc: IBC -7/10
D11 -369 Printed: 11 -29 -2011
this requirement.
7: Manufacturers installation instructions shall be available on the job site at the time of inspection.
8: All electrical work shall be inspected and approved under a separate permit issued by the City of Tukwila Building
Department (206- 431 - 3670).
9: All plumbing and gas piping work shall be inspected and approved under a separate permit issued by the City of Tukwila
Building Department (206- 431 - 3670).
10: Prior to final inspection for this building permit, a copy of the roof membrane manufacturer's warranty certificate
shall be provided to the building inspector.
11: VALIDITY OF PERMIT: The issuance or granting of a permit shall not be construed to be a permit for, or an approval of,
any violation of any of the provisions of the building code or of any other ordinances of the City of Tukwila. Permits
presuming to give authority to violate or cancel the provisions of the code or other ordinances of the City of Tukwila
shall not be valid. The issuance of a permit based on construction documents and other data shall not prevent the
Building Official from requiring the correction of errors in the construction documents and other data.
doc: IBC -7/10
D11-369 Printed: 11 -29 -2011
•
CITY OF TUKWILA
Community Development Department
Public Works Department
Permit Center
6300 Southcenter Blvd., Suite 100
Tukwila, WA 98188
http://www.TukwilaWA.gov
•
Building Permit No. V 1 I 94,1
Project No.
Date Application Accepted: 1t 1
Date Application Expires:
(For office use only)
CONSTRUCTION PERMIT APPLICATION
Applications and plans must be complete in order to be accepted for plan review.
Applications will not be accepted through the mail or by fax.
* *Please Print **
SITE LOCATION
^ `` ,,,,.,, King Co Assessor's Tax No.: 03 2 30 5L'9/ S 2
Site Address: i 0 8,3 ( �/t �/4R �J //V� -C. A" S. Suite Number: Floor:
Tenant Name- iii / New Tenant: ❑ Yes 15f..No
_
POP-ERTY OWNER
Name: Sett tl h ftCePlaa (LC
Address#10.SS f pap. 106'55 NE e'Li 90/
City: gc &l/ac State: am_ Zipq ()L(
CONTACT PERSON - person receiving all project
communication
Company Name
40: ir[. • !! f jkli
Name: ��ex/ ii ,( )coc e to
tc___,
0
Address: i100 8>Z 17,W
Date:
Contr Reg No.: .._ /�.f- /1
Ci ...eiYll/Yjcit Q _ State Zip
is
Phone2 L/. ��7`/ — Fax:�� gA0,
Zip:
Email: P�yxI(a a Ll..zeIt! p
t
Phone: Fax:
GENERAL CONTRACTOR INFORMATION
Company Name
40: ir[. • !! f jkli
Address: ; • •�
•—• r
City: / Zip9OOM
!�S
Xatfal_
Phone 2 C x: 'n p
,�
Date:
Contr Reg No.: .._ /�.f- /1
4c,p
l
Tukwila Business License No.: L - ^ q � lr
H: ApplicationsWorms- Applications On Line\2011 Applications\Permit Application Revised - 8- 9.11.docx
Revised: August 2011
bh
ARCHITECT OF RECORD
Name:
Company Name:
Company Name:
Engineer Name:
Architect Na
:
4
Zip:
Address:
Zip:
Phone: Fax:
City:
State:
Zip:
Phone:
Fax:
Email:
ENGINEER OF RECORD
Name:
Company Name:
Engineer Name:
Address:
4
Zip:
City: State:
Zip:
Phone: Fax:
Email:
LENDER/BOND ISSUED (required for projects $5,000 or
greater per RCW 19.2 .095)
Name:
AV
Address:
City:
State:
Zip:
Page 1 of 4
BUILDING PERMIT INFORMATION— 206 - 431 -3670
Valuation of Project (contractor's bid price): $ /01 oZ 0 - 6 Existing Building Valuation: $
Describe the scope of work (please provide detailed information):
or-cf 6;6 l
ti �'� c' - �noel i2 ( / 2lL d
/Y)®Q1 e i /110)
Will there be new rack storage? ❑ Yes
0.. No If yes, a separate permit and plan submittal will be required.
Provide All Building Areas in Square Footage Below
PLANNING DIVISION:
Single family building footprint (area of the foundation of all structures, plus any decks over 18 inches and overhangs greater than 18 inches)
*For an Accessory dwelling, provide the following:
Lot Area (sq ft): Floor area of principal dwelling: Floor area of accessory dwelling:
*Provide documentation that shows that the principal owner lives in one of the dwellings as his or her primary residence.
Number of Parking Stalls Provided: Standard:
Compact: Handicap:
Will there be a change in use? ❑ Yes ❑ No If "yes ", explain:
FIRE PROTECTION/HAZARDOUS MATERIALS:
❑ Sprinklers ❑ Automatic Fire Alarm ❑ None ❑ Other (specify)
Will there be storage or use of flammable, combustible or hazardous materials in the building? ❑ Yes ❑ No
If `yes', attach list of materials and storage locations on a separate 8 -1 /2 "x II" paper including quantities and Material Safety Data Sheets.
SEPTIC SYSTEM
❑ On -site Septic System — For on -site septic system, provide 2 copies of a current septic design approved by King County Health
Department.
H:'Applications\Forms- Applications On Line' 2011 Applications\Pennit Application Revised - 8- 9- 11.docx
Revised: August 2011
bb
Page 2 of 4
Existing
Interior Remodel
Addition to
Existing
Structure
New
Type of
Construction per
IBC
Type of
Occupancy per
IBC
1' Floor
2nd Floor
3'd Floor
Floors thru
Basement
Accessory Structure*
Attached Garage
Detached Garage
Attached Carport
Detached Carport
Covered Deck
Uncovered Deck
PLANNING DIVISION:
Single family building footprint (area of the foundation of all structures, plus any decks over 18 inches and overhangs greater than 18 inches)
*For an Accessory dwelling, provide the following:
Lot Area (sq ft): Floor area of principal dwelling: Floor area of accessory dwelling:
*Provide documentation that shows that the principal owner lives in one of the dwellings as his or her primary residence.
Number of Parking Stalls Provided: Standard:
Compact: Handicap:
Will there be a change in use? ❑ Yes ❑ No If "yes ", explain:
FIRE PROTECTION/HAZARDOUS MATERIALS:
❑ Sprinklers ❑ Automatic Fire Alarm ❑ None ❑ Other (specify)
Will there be storage or use of flammable, combustible or hazardous materials in the building? ❑ Yes ❑ No
If `yes', attach list of materials and storage locations on a separate 8 -1 /2 "x II" paper including quantities and Material Safety Data Sheets.
SEPTIC SYSTEM
❑ On -site Septic System — For on -site septic system, provide 2 copies of a current septic design approved by King County Health
Department.
H:'Applications\Forms- Applications On Line' 2011 Applications\Pennit Application Revised - 8- 9- 11.docx
Revised: August 2011
bb
Page 2 of 4
PERMIT APPLICATION NOTES —
Value of Construction — In all cases, a value of construction amount should be entered by the applicant. This figure will be reviewed and is subject
to possible revision by the Permit Center to comply with current fee schedules.
Expiration of Plan Review — Applications for which no permit is issued within 180 days following the date of application shall expire by limitation.
The Building Official may grant one or more extensions of time for additional periods not exceeding 90 days each. The extension shall be
requested in writing and justifiable cause demonstrated. Section 105.3.2 International Building Code (current edition).
I HEREBY CERTIFY THAT I HAVE READ AND EXAMINED THIS APPLICATION AND KNOW THE SAME TO BE TRUE UNDER
PENALTY OF PERJURY BY THE LAWS OF THE STATE OF WASHINGTON, AND I AM AUTHORIZED TO APPLY FOR THIS PERMIT.
BUILDING 0
/R' O R A/UT HORIZ D AGE T:
Signature: /,t- .�.! Cite Date: / VII
Print Name: Sall Ca PIA f ay Telephone: 2 7p r 7 ws--)
Mailing Address: ' Y2-87'91(
' /ne g 9, (.J
City state Zip
H:\ApplicatioasWorms- Applications On Line \2011 ApplicationsWermit Application Revised - 8.9- 11.doca
Revised: August 2011
bh
Page 4 of 4
i
City of Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206 - 431 -3670
Fax: 206-431-3665
Web site: http://www.TukwilaWA.gov
RECEIPT
Parcel No.: 0323049066 Permit Number: D11-369
Address: 10831 EAST MARGINAL WY S TUKW Status: APPROVED
Suite No: Applied Date: 11/15/2011
Applicant: SIMMCO Issue Date:
Receipt No.: R11 -02573
Initials:
User ID:
Payee:
LAW
1632
Payment Amount: $2,053.90
Payment Date: 11/29/2011 12:27 PM
Balance: $0.00
ASSOCIATED ROOFING INC
TRANSACTION LIST:
Type Method Descriptio Amount
Payment Check 93169 2,053.90
Authorization No.
ACCOUNT ITEM LIST:
Description
Account Code Current Pmts
BUILDING - NONRES 000.322.100
STATE BUILDING SURCHARGE 640.237.114
Total: $2,053.90
2,049.40
4.50
doc: Receiot -06 Printed: 11 -29 -2011
1 0
City of Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206 - 431 -3670
Fax: 206-431-3665
Web site: http: / /www.TukwilaWA.gov
RECEIPT
Parcel No.: 0323049066 Permit Number: D11 -369
Address: 10831 EAST MARGINAL WY S TUKW Status: PENDING
Suite No: Applied Date: 11/15/2011
Applicant: SIMMCO Issue Date:
Receipt No.: R11 -02482
Payment Amount: $1,332.11
Initials: JEM Payment Date: 11/15/2011 10:05 AM
User ID: 1165 Balance: $2,053.90
Payee: ASSOCIATED ROOFING INC.
TRANSACTION LIST:
Type Method Descriptio Amount
Payment Check 93087 1,332.11
Authorization No.
ACCOUNT ITEM LIST:
Description
Account Code Current Pmts
PLAN CHECK - NONRES
000.345.830 1,332.11
Total: $1,332.11
doc: Receipt -06 Printed: 11 -15 -2011
INSPECTION NO.
.. INSPECTION RECORD
Retain a copy with permit
Q(( -3(
PERMIT NO.
CITY OF' TUKWILA BUILDING DIVISION
6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431 -3670
Permit Inspection Request Line (206) 431 -2451
Project
Type o spietioon! S
Address:
10 8-3 i ff. AA/6. "ii
Date Called:
L.r
Special Instructions:
pie - c-A
Date Wanted:..
) ,--
Requester:
Phone o: (0
_ _78,4 _70 Q
Approved per applicable codes. a •Corrections required prior to approval.
COMMENTS:
: 'C< <
SAS fop o A&A
c,
u�
_,V0A11-0■--
1
?v,,,in-- t,o,,,ce-xe
. . ,
1Inspecr:
Date:
REINSPECTION FEE REQUIRED. Prior to next inspection. fee must be
paid at 6300 Southcenter Blvd.. Suite 100. Call to schedule reinspection.
INSPECTION NO. PERMIT NO.
CITY OF TUKWILA BUILDING DIVISION
6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431 -3670
Permit Inspection Request Line (206) 431 -2451
INSPECTION RECORD
Retain a copy with permit
Project:
S , '' tta
Type of Inspection -
Pre - (Z_F d E
Address: _/`� r
t O 1 F. A44r6,: A A-L
Date Called:
Special Instructions:
,(
CIA'tk / `
/
Date Wanted:.
Z.-
1 - �' ('
`a�.mr..
p.m.
Requester„,
1 rM
Nt'' k.41 i —
Phone
-2A) (.6 - S–i 0 — 1 „
(0 l
Approved per applicable codes. Corrections required prior to approval.
COMMENTS:
,(i)
P,6,- A—t
6,) A A : \- , .)A s JA
Nt'' k.41 i —
r
{
-. , \ •;\ u P ;
..,
P1
)1'
' } ; t) ,
. _) ', t , ' .SCI,
t.
1.
; A.
- 1J\CneeX.'A
•
nspec
1'
(Date:,
i�- 7
n REINSPECTION FEE REQUIRED. Prior to next inspection, fee must be
paid at 6300 Southcenter Blvd.. Suite 100. Call to schedule reinspection.
t
wAT66tteortNG lAfLEfE3 AND INSI;LATISG SYSULxS •
12 Year (10 Year Non - Coated)*
:� . „��,,. LIMITED ROOFING MATERIAL WARRANTY
e .. ,ry A) -r/r) ni s
Owners Name: �1
Owner's Address: to 3! E. /Tit'? 86/ NA L LLJJst y s .
('Warranty Is self-executed by user)
City
State: U(1 X Zip: /i �f
Building Name:
Building Address:
City:
5mineo b qq • .e-)(aLtor reap
/ ♦ 6 / F 5-7— MARGO-JAC 647 Sa
k9 /a . state kiA
S OChilzyp
/d
Roofing Contractor Name:
Zip:
PII V.4
Roofing ctorMdress: •
r:21,12” City: /? O,Qe // state: � Lp: 86 2 Roofing Contractor Phone: �(� �(O 7 9� Polyglass Registered Contractor #: i Al
Polyglass Product(s) Used: �� 4" / e- t -� � RMI
Project Size: QO ages Feet _ Completion Date: �A /v(,(A%Cp /; �12.. CENTER
Roofing fi n t ' Tr k
Specl catio Used:
TERMS AND COI4bITIONS:
Definitions: •Pdygtass' shall mean Po yglasse USA, Inc. 1111 W. Newport Center Drive; Deelleld Beath, FL 33442. - Owner shall mean the original party
listed above as Owner's Name whose building the Painless roof membrane product is installed.
Polyglass warrants; the Polyglass' membrane to be free from manufacturing defects which affects the ability of the product to perlerm in a watertight manner
(herein considered defective) for the period of Twelve (12) years from the date of original Installation of the roofing membrane for all Mineral Surfaced. Alundnum
and Acrylic coated membranes, Fifteen (15) years for EmulsloNAluminum or Emuls1on/Aayllc coated, smooth surfaced membranes wW be limited to Ten (10)
year This warranty is for the aria benefit of Owner dem:iba above ('Owner) and is not transferrable or assignable. Warranty must be registered with Poyglau
to become In effect otherwise the Polyglass membrane have warranty protection as provided by its Product Liability Coverage. A legible copy of this
Warranty and proof of purchase must be registered with •....., ' USA, Inc. Atln: Warranty Department 1111 W. Newport Center Drive Deerfield Beach. FL 33422
within 90 days of the original date of purorsse.
Should Polyglots' membrane be deemed d:. `F% ,,by; - • ••• -, as described above, Palygless erdse the option to repair or replace such defective
materials, Otquelfeny asss� labor tJo^p ,d1�• u', ... Polyglass' maximum liability, wider an}tcircu nstances, shall not exceed the cost of the defective
membrane at t rhe'.di filletrrr; g all " "a" costs; amts of Bashing, metal work, or other materials not supplied or furnished
by Polyglass.
This sum shall be w Vp et year Teo (2) of Its by IIIZ (1/18) for EmWSloruCoeted (1/10) for snood surfaced* eamairdng in the warranty period
and further 8 t previously incurred for the repair or replacement of any Polyglass materials under this warranty. or
replacement to re 1t age shall be owners SOLE AND,EXCLUSIVE REMEDY against Polyglass. repair
Polyglass shall have no obligation based upon the following exclusions under this warranty:
1) Damage by natural disasters, including but not limited to lightning, hail, gale forte mother strong winds exceeding 8 on the Beaufort Scale,
floods, huntcenes. tornadoes, wind launched debris, earthquakes or similar ads of god or natural causes;
2) Damage by wilful or negligent ads, fire, vandalism, or other misuse;
3) Damage by use of materials not furnished by Polyglass;
4) Owner or lessee falls to use reasonable care in maintaining and repairing the Poygtass membrane or other required components of the roofing
system
5) Damage by structure] failure, Including, without out lmitation, settling or shifting of the building, or movement, aaddng, or deflection of the roof deck,
roof substrate, roof insulation, building design of construction, Inadequate attic ventilation;
8) Damage by any chemical cordilon not disdosed to Polyglass, or traffic or storage of materiels or Infiltration of condensation or moisture N,
through or around the walls, coping, building structure of the underlying or surrounding areas;
7) Alterations or repairs made on or through the roof or objects (including, without limitation, machines, Egudures, fi,dures, or utilities) are placed on
the roof without prior written authorization of Polyglass;
8) Metal work or other materials not furnished by Polyglass and used in the roofing system resulting In leaks;
9) Poor workmanship in the application of materials as determined in Polygon' sole judgment
10) Failure to utilize Poyglass' latest instructions and recommendations as to installation prooadurer,
11) Damage resulting from lads of positive, proper or adequate drainage;
12) loss in part or in whole of granule or other surfacing;
13) Damage or Injury arising in any way from an actual or alleged discharge or release of any polluted or waste, environmental or airborne
contaminates;
14) Damage or injury arising in any way from testing/sampling of underlayment, design and consulting errors or omissions.
15) Failure to register this warranty wi1Mn 90 days of purchase to Polyglass.
In addition to hems 1 -15 above, owner agrees that Polyglass shall have no responsibility wludsoever for bodily injury to any person or damage to the
structure or its contents direetiy or Indirectly arising out of any defects in its roof underlayment or any other consequential or lnddentai damages or attorneys fees.
Polyglass' sole responsibility is the repair or replacement of defective underlayment membrane that Is directly related to leakage. TTds warranty does not indude
the cost of removal of existing, or the cost of labor to repair or replace the defecWe underlayment and/or roofing covering/system installed to the Polyglass
wrderiayntent.
Claim Procedure:
Polyglass shall have no obligation under this warranty unless Owner shall have promptly notified Polyglass in writing along with attached Proof of Purchase
to Polyglass by registered or certified mail. Dared all daims to Polygless, U.SA 111 W. Newport Center Drive, Deerfield Beach. Roddy 33442. ATTN:
Warranty Department Any claim shall provide a copy of warranty and detailed 61leim,the leakage and alleged defect Poyglgss must receive such notice
ydWn ten (10) days after discovery of the claimed defect.
Owner shall provide Polyglass, and its agents and employees, free, safe and reasonable access to the roof during regular business hours during the tens of
the warranty. Owner shall be responsible for all costs related to safe and reasonable access to investigate daim
Polygiau' good -faith determination of the source of Leakage, damage, or alleged defect to the roof shall be exclusive and binding to owner.
Polyglass' failure at any time to enforce any of the moors and conditions of this warranty shall not be construed as a waiver of such provisions.
Poll/glass reserves the right to discontinue or motley any of its products and shall not be lade to Owner as a result of
modification. anY such discontinuance or
THIS WARRANTY SUPERCEDES AND IS IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT
UMITATION, WARRANTIES OF MERCHANTABUUTY AND FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY SHALL BE OWNER'S EXCLUSIVE
REMEDY AGAINST POLYGLASS OR ITS AFFILIATES, AND NEITHER POLYGLASS NOR ITS AFFILIATES SHALL BE LIABLE FOR ANY CONSEQUENTIAL
OR INCINDENTAL DAMAGES. POLYGLASS' AGENTS HAVE NO AUTHORITY TO GIVE WARRANTIES BEYOND THOSE PROVIDED IN THS
WARRANTYALL RIGHTS AND DUTIES ARISING UNDER THIS WARRANTY SHALL BE GOVERNED BY FLORIDA LAW.
Warranty presented and determined as Incomplete or Inaccurate shat) be considered null and void.
0080« 2011
REVISIONS
No changes shall be made to the scope
of work without prior approval of
Tukwila Building Division.
NOTE: Revisions will require a new plan submittal
and may include additional plan review fees. 1
FILE C P
Permit Na
Plan review approval is subject to effOTs and arsons.
&pprovat of axles documents does not authorize
the violation of any adopted code or off. Receipt
of approved Copy and ., ., I1.,. is acknowledged:
BY
City Oflltkwiia
BUILDING DIVISION
SEPARATE PERMIT
REQUIRED FOR:
0 Mechanical
Electrical
Plumbing
Gas Piping
City of Tukwila
•BUILDING DIVISION
ASSOCIATED ROOFING, INC
Customer: Sit
Date
joS. Name: Sin') rn irn co 44)a.ks.ofelase., Prepared
S` bject:
REV F
Page: , CO D2
rl
AP
■r
1
0
2:f
j%'(
./
t 4vM!1 i
I I
•
t✓���.i��3�
,
„a
.741101
ill
I :
! I
T.IPI,
I i
11- .r
°--
u$
�,
i
Iii:
►i
;mss �
Vii
t`
1
,
.
.
1
r
!
.a
1
3
I f ( 1.� -;-11,
3 1
UL;
Jr I
•
i 930 I. I
I
1.�! �
� `fi Ill •
NEMO
HIE
.17;
W
�
r
,1
I Ya .V.
f:d
i
1 fi, { 1
1
‘1111111111,1
,
TAINMA
ill
11111111111111111
111111
.
13d -'
�.
Alt'
.
.4_,
11111
1
_
,,,,ii
a
II
0'
tr
10
4TYR0 Unit AA all. 4714C —I1
■
1 1 - I' . h. I I
1
■
■
I-
iipUt
1 1 I
Iii1111EVAI
i
1
1
inguimunis
III- Associated Roofing, Inc.
ASSOCRI 1 621)6
111
P.O. Box 82894 206 364 4445
Kenmore, WA 800 358 3119
98028 Fax 206 368 2303
NOVEMBER 9, 2011
CITY OF TUKWILA
DEPT OF COMMUNITY DEVELOPMENT
6300 SOUTHCENTER BLVD., SUITE 100
TUKWILA, WA 98188
RE: SIMMCO BUILDING - UNHEATED BUILDING- EXCLUDING OFFICE ROOF
10831 EAST MARGINAL WAY SOUTH
TUKWILA, WA
The existing roofing is two layers Class "13" built -up asphalt roofing installed over a 5/8" plywood
deck. Existing roofing is to be torn off. The building is an unheated space.
The new roof system to be installed is a Polyglass Polyflex G granular surfaced modified bitumen
heat welded /torch applied system installed over one layer of %" periite coverboard and a
mechanically fastened 501 modified base sheet.
We have attached product literature and data for your review.
RESPECTFULLY SUBMITTED,
TIM RESSLER
SALES ENGINEER
TR /jms
enc
CODE FOR
COMPLIANCE
APPROVED
hot/ 2 8 2011
City of �
Mrvtla
BUILDING
tvis/oN
Serving the Pacific Northwest Since 1 979
RECEIVED
CITY OF TUKWILA
NOV 1.5 2011
PERMIT CENTER
•
t+vs a--...,,,,
Associated Roofing, Inc.
ASSOCRI16206 PROPOSAL AND CONTRACT
P.O. Box 82894 This is a plain- English" contract. ~We ° `us, snd "our" means
Kenmore, Washington 98028 Associated Roofing, Inc. "You" means the customer.
206 364 -4445 • 800 358 -3119 • 206 368 -2303 (Fax) REVISED OCTOBER 1$ 2011
Dace: OCTOBER 28, 2010 PAGE 1 OF 2
Proposal Submitted To:
JEFF PATTISON 425 - 455-0.500
JSH PROPERTIES, INC.
10855 NE 4TH 0901
BELLEVUE, WA 98004
Job Name and location:
SIMMCO BUILDING
EXCLUDING/11 %I,' OOF.`'4 ' 1..
10831`EAST MA
jw....._ _ . _ . , i �,. sit v
TUKWILA, WA
File Code: D30+95 / 2T / TR-Jms
LAR alRFACE MODIFIED BITUMEN ROOF
substrate. 0 roofing material is mopped solidly to substrate,
fasteners and sweep dean and dry as necessary. During
structural soundness. It is understood the owner or their approved
and removal. This is necessary to avoid any delay while the roof
and structural repairs WI be made and invoiced on a time
Plywood replacement will be lmrolced as follows:
foot, and 3/41n. 0 $2.75/square foot Plywood
and disposal fees.
pipes and multiple -ply membrane stripping..
fasten with simplex stronghold nails.
surface modified bitumen roof system per manufacturer's
a manufacturers ten (10) year limited material warranty.
flashing materials, installed per manufacturers specifications, to
with baked enamel finish using gasketed galvanized nails
Install roof membrane and flashing. Reinstall damping ring
with new at a cost of $150.00 per drain. If the drain is found
as work additional to contract.
box combo. Reconnect existing downspouts.
with caulk joint
loose lay an additional layer of cap sheet under unit support
timbers with pressure treated wood, and reset mechanical
A PART OF THIS SCOPE OF WORIG
Dollars S
PROPOSAL W tallot�y tqf .rhemmaag���laher
SYSTEM T� Sn1
SCOPE OF THE WORK The specific scope of the work for this projeu is.
1. Remove edge metal and haul away for disposal.
2. Tear off the existing roof covering's] down to the wood
it will be removed to best suitable surface. Set all protruding
the roof removal, the substrate will be inspected for
representative will be available during the demolition
is uncovered and exposed to the weather. Roof deck
REVIEWED F 4 .00/per mat -hour] and material [plus 15%] basis.
I i1/2in. $1.75/square foot, 5/81n. @ 82-00/square
DDE COMPLI/ ,:,,:r-. =. ent rates include labor, material, cxartage,
APPROVE 14 Fur and Install 1/2" perlite coverboard.
1 -. r: 31b lead pipe fleshings on plumbing soil vent
¢t Install one ply 281b fiberglass base sheet and mechanically
NOV 2 8 2u 6. Install a Polyglass Polyflex G 4.5mm, or equal, granular
. , - .-:,. ors. This is a torchgrade membrane with
7. All -: r, , curbs, and sharp angles will have additional
City Of Tlli( I Indudq multiple-ply membrane stripping.
Cy . �hstalI hew 24 gauge sheet metal perimeter flashing
I UI LDI NG OIV , ackliek head gasketed screws.
. up and remove all debris from contracted work.
OTHER ITEMS INCLUDED IN THE SCOPE OF WORK:
A. Remove damping ring from existing intemal roof drain.
and/or mounting hardware. If it is unserviceable, replace
to be unserviceable, it will be removed and replaced
B. Provide and install ten (10) edge scupper and collector
C. Install 60- 1124-gauge surface mount reglet flashing
D. Raise mechanical units, install specified roof system,
timbers; reset existing timbers and/or replace unserviceable
units.
•
THE FOLLOWDEtrilfaralfiPAGE D QUALIFICATIONS ARE
Terms and Conditions Listed On Reverse Side PLUS slitilitiVkU
CITY OF TUKWIL)
WARRANTIES: Our warranty for workmanship, as described on the reverse
The manufacturer's warranty, which is described in their warranty which will
AUTHORIZED!
side, is for years.
NOV '15'2011
CENTE
be provided to you, is for years.
PERMIT
SIGNATURE
-..
Associated Roofing, Inc. Associated Roofing, Inc.
CUSTOMER ACCEPTANCE OF PROPOSAL
This proposal is accepted. The scope of work. price. terms and conditions contained on the from and revere of this
1401
SIGNATURE TITLE DATE
RETURN ORIGINAL OF THIS PROPOSAL TO P.O. BOX 82894. KENMORE. WASHINGTON 9RI12R
w
Associated Roofing, Inc.
ASSOCRI16206 PROPOSAL AND CONTRACT
P.O. Box 82894 This is a plain- English" contract. We," "us, and "our" means
Kenmore, Washington 98028 Associated Roofing, Inc You means the customer:
206 364 4445 • 800 358 -3119 • 206 368 -2303 (Fax) REVISED OCTOBER 12, 2011
Date: OCTOBER 28, 2010 PAGE 2 OF 2
Proposal Submitted To:
JEFF PATTISON 425 - 455-0500
JSH PROPERTIES, INC.
10855 NE 4TH 8901
BELLEVUE, WA 98004
job Name and Location:
SIMMCO BUILDING
EXCLUDING OFFICE ROOF
10831 EAST MARGINAL WAY SOUTH
TUKWILA, WA
File Code: D30+95 / 2T / TR -jms
PROPOSAL W t ih igust gem; bi• AtigitIola UlR suRPACE MODIFIED BITUMEN ROOF
SYSTEM
SCOPE OT THE WORK The speufit. swpe of the wuik fur this ptuje.t is:
NOTES 1 EXCLUSIONS:
' Office roof is excluded from our scope of work.
' interior protection is not included in our scope of work.
* This proposal does not include bringing the insulation up to Code (R -21). According to the City of Tukwila, if no internal
sprudder system and it is not a heated space, insulation is not required. There are two (2) Reznors hanging in
shop, but are not operational. These units should be removed by others prior to beginning work.
QUAUFICATIONS TO BID:
A. There will be dirt and debris associated with this project_ if decking repairs are necessary, there is the potential for
sheetrock (ceiling) damage while replacing decking. Repair to such damage is the sole responsibility of the property
owner. Important items should be moved, covered, and/or secured to prevent damage. Notification to the tenant(s)
is the responsibility of the owner or owner's representative. Associated Rooting is not responsive for consequential
damages to the structure or contents.
B. As this Is a construction project, there will be additional vehicle traffic and an increased level of noise.
There may also be an odor present. Some people may find this objectionable, however, please be
assured this smell, as far as we know, has not been shown to be a health hazard.
C. By acceptance of this contract, the owner or owner" s representative is stating to the best of their
knowledge there is not the existence of any asbestos containing materials that will be disturbed by the
performance of the specified work.
D. The cost excludes all permits and fees (Le. ,buikfing, street/sidewalk use, or fire/torch). If required,
we will obtain at the owner's expense.
E. Owner to provide parking through duration of project.
F. If applicable, temporary relocation and/or realignment of satellite dishes(s) to facilitate this project are
not included In the scope of work and are the responsibility of the owner.
G. Price valid for thirty (30) days.
PLEASE NOTE: Due to the size of this project, we are requesting a downpayment of 25% 10 days prior
• p S to commencement of the work. q(� �g�r S g�ppg Qg yp
THE FOLLOWri� NE t1U REDIiielliN eWOMIN NUNDRED Tf ItlTY & N01700 ORK. 169,520 00
Dollars $
Terms and Conditions Listed On Reverse Side PLUS SALES TAX
WARRANTIES: Our warranty for workmanship, as described on the reverse
The manufacturer's warranty, which is described in their warranty which will
AUTHORIZED: TIM RESSLER
side, is for FIVE years. T }
be provided m you, is for TEN LTD MAT
SIGNATURE:
Associated Roofing, Inc Associated Roofing. Inc.
CUSTOMER ACCEPTANCE
Th proposal is accepted. The scope of work. price. urns and conditions contained
7 s `�"�SIGNA
OF PROPOSAL
on the front and reverse of this document mnairote the contra.
///f /l)
DATE
RETURN ORIGINAL OF THIS PROPOSAL TO: P.O. BOX 82894. KENMORE. WASHINGTON 9Rn28
1 UP U.K14D / 1 - xootmg systems
Page Bottom
TGFU.R14571
Roofing Systems
See General Information for Rooflno Systeme
POLYGLASS USA INC
150 LYON DR
FERNLEY, NV 89408 USA
Roofing Systems
FILE COPY
Permit rin. ._._ ---
SINGLE PLY MEMBRANE SYSTEMS
r"-_ .._.
REVIEWED FOR
CODE COMPLIANCE
APPROVED
114571 NOV 2 8 2011
City of Tukwila
BUILDING DIVISION
Unless otherwise Indicated, the Insulation and base sheet are mechanically fastened In place; the membrane is heat welded in place.
(Optional) Noncombustible deck dassiflcations are applicable for use over combustible (15/32 In. min plywood) decks when 1/2 in. (min) gypsum
USG orp SECUROCKTM Roof pBoard Type "DensDeck
RX-G are used di "recttlly over the combust ble deck "with all joints staggered 6 In.o (min) fromyplywood (min)
joints.
Unless otherwise indicated, in any noncombustible roof deck Classification any UL Classified insulation may be utilized undemeath a layer of 1/4 In.
(min) G -P Gypsum "DensDeck ® Roofboard ", "DensDeck Prime® Roofboard ", "DensDeck DuraGuardTM Roofboard" or 1/4 In. (min) USG Corp
SECUROCKTM Roof Board Type FRX -G.
General statement for use of vapor retarders and/or deck/insulation adhesives (NC decks only): When such vapor retarders or deck/Insulation
adhesives are acceptable to POLYGLASS they may be utilized.
" POLYGLASS BASE ", "MODIBASE ", "Polyglass G2 Base" may be used In lieu of any Type G2 base sheet In any NC Classification. These products
may also be used In any C -15/32 Classification In which a generic Type G2 is referenced (Le. not brand specific). " POLYGLASS Ply 4', " POLYGLASS
Ply 6" (Type Gi) and " POLYGLASS VENTED BASE" may be used In any NC Classification. These products' may also be used In any C -15/32
Classification In which a generic Type Gi Is referenced (Le. not brand specific).
References to polylsocyanurate insulation may include Polyglass Products "POLYTHERM ®" and "POLYTHERM® Tapered ".
Acceptable alternates to the membranes listed are given below:
"POLYBOND"
"POLYBOND G"
Membrane Listed
Acceptable Alternatives
"MODIBOND"
"MODIBOND G"
"Polytherm ", "Polytherm Tapered" or "Polytherm Composite" insulations may be used wherever polylsocyanurate Insulations are specified In the
Classifications below.
Insulation may be optional for any non - combustible deck roofing system unless the insulation acts as a coverboard over another insulation.
Class A - Ballasted
1. Deck: C -15/32 Incline: 3
Insulation: — Polylsocyanurate, urethane, perlite /polylsocyanurate composite, perlite /urethane composite, glass fiber, phenolic or perite,
any thlkness.
Ply or Base Sheet: — One ply "ELASTOBASE ", " ELASTOFLEX V ", " ELASTOFLEX V -C" or "ELASTOSHIELD TS G ".
Membrane: — One or more layers " POLYGLASS 350 CAP ", " POLYFRESKO 350 CAP ", "POLYBOND ", "POLYBOND G ", "POLYFLEX ",
"POLYFRESKO TORCH" or "POLYFLEX G" (modified bitumen), heat welded, or one or more layers "ELASTOFLEX V ", " ELASTOFLEX V -C ",
"ELASTOBASE ", " ELASTOFLEX S6 ", " ELASTOFLEX P -C" or "ELASTOSHIELD TS G" mopped In hot asphalt or heat fused.
Surfacing: — Gravel, embedded in hot mopping asphalt. RECEIVED
CITY OF TUKWILA
4D1
nli "Ai
Class B - Ballasted
NOV 15-Z811
PERMIT CENTER
1. Deck: C -15/32 Incline: 3
Base Sheet: — Type G2.
Membrane( — "POLYBOND", "POLYGLASS 350 CAP", "POLYFRESKO 350 CAP ", "POLYBOND G ", "POLYFLEX", "POLYFRESKO TORCH ",
" POLYFLEX G" (modlfled bitumen), heat welded, or one or more layers "ELASTOFLEX V", "ELASTOFLEX V -C", "ELASTOBASE ", "ELASTOFLEX
S6 ", "ELASTOFLEX P -C" or °ELASTOSHIELD TS G ", mopped In hot asphalt.
Surfadng: — Gravel, embedded In hot mopping asphalt or heat fused.
Class A - Fully Adhered
1. Deco NC Incline: 1/2
Insulation (Optional): — Polylsocyanurate, urethane, perlite /polYisocyafurate composite, perlite/urethane composite, glass fiber,
phenolic or perlite, any thickness.
Base Sheets — One or more layers "ELASTOBASE ", "POLYFLEX ", "ELASTOFLEX V ", "ELASTOFLEX V -C" or Type G2 base sheet.
Membrane: — "POLYBOND ", "POLYBOND G ", "POLYFLEX ", "POLYFRESKO TORCH" or "POLYFLEX G" (modified bitumen), heat welded.
Surfadng: — "PG 800 Asphalt Emulsion Roof Coating', applied at 3-4 gal/sq. or Kokem Products "Sunguard Acrylic Roof Coating° at 1
gaVsq; or Karnak No. 97 Flbrated Aluminum Asphalt Roof Coating or Karnak No. 97 Asbestos Free Aluminum Roof Coating at 1 to 2 gaV
sq; or Brewer "Fortress 5001 Asphalt Emulsion ", applied at 4 gal. /sq., followed by "PolyPtus 60 ", applied at 11/4-1 gal./sq..
2. Deck: C -15/32 Incline: 1/2
Insulation: — Two or more layers (Insulation joints staggered a min of 6 In. from plywood deck joints) polyisocyanurate,
perlite/polylsocyanurate composite, perilte/urethane composite, glass fiber, phenolic or periite, any thickness.
Base Sheet — One or more layers °EIASTOBASE ", "POLYFLEX ", "EIASTOFLEX V" , 'ELASTOFLEX V -C" or Type G2 base sheet.
Membranes — "POLYBOND ", "POLYBOND G ", "POLYFLEX ", 'POLYFRESKO TORCH" or " POLYFLEX G" (modified bitumen), heat welded.
Surfadng: — 'PG 800 Asphalt Emulsion Roof Coating ", applied at 3-4 gaVsq. or Kokem Products "Sunguard Acrylic Roof Coating" at 1
gaVsq; or Kamak No. 97 Flbrated Aluminum Asphalt Roof Coating or Karnak No. 97 Asbestos Free Aluminum Roof Coating at 1 to 2 gal/
sq; or Brewer "Fortress 5001 Asphalt Emulsion ", applied at 4 gal./sq., followed by "PolyPtus 60 ", applied at IA -1 gal./sq.•
3. Deck: C-15/32 Inclines 1/2
Insulations — 1/4 M. thick G -P Gypsum DensDeck ®, perlite,i wood fiber or glass fiber, 1 In., mechanically fastened.
Base or Ply Sheet: — One or more layers " POLYFLEX° (mechanically fastened or heat welded), "ELASTOBASE ", "ELASTOFLEX
°ELASTOFLEX V-C" or Type G2 base sheet (mechanically fastened or hot mopped).
Membrane: — "POLYBOND ", "POLYBOND G °, "POLYFLEX ", "POLYFRESKO TORCH° or " POLYFLEX G" (modified bitumen), heat welded or hot
mopped.
Surfadng: — "PG 800 Asphalt Emulsion Roof Coating °, applied at 3-4 gat/sq. or Monsey Products °Endure Aluminum Roof Coating ",
'Weather Check" or "Pro -Grade Aluminum Roof Coating °, 1.5.gal /sq; or Karnak No. 97 Fibrated Aluminum Asphalt Roof Coating or Karnak
No. 97 Asbestos Free Aluminum Roof Coadng at 1 to 2 gal/ sq; or Brewer "Fortress 5001 Asphalt Emulsion ", applied at 4 gal./sq., followed
by "PolyPtus 60 ", applied at 3/4-1 gal./sq..
4. Dada NC Incline: 1
Insulation (Optional): — Polylsocyanurate, glass fiber, perilte, wood fiber, any combination, any thickness.
Base Sheet — " POLYFLEX" (mechanically fastened or heat welded) or Type G2, mechanically fastened or hot mopped.
Membrane: — "POLYBOND ", "POLYBOND G °, "POLYFLEX ", "POLYFRESKO TORCH" or "POLYFLEX G" (modified bitumen), heat welded.
Surfadng: — °PG 800 Asphalt Emulsion Roof Coating ", applied at 3-4 gal/sq. or Grundy Industries 'al MB Aluminum Roof Coating° at 1 -2
gaVsq; or Brewer "Fortress 5001 Asphalt Emulsion °, applied at 4 gal. /sq., followed by "PolyPtus 60 °, applied at $ -1 gal. /sq..
5. Dada NC Incline: 1
Insulation (Optional): — Polylsocyanurate, urethane, perlite /polyisocyanurate composite, perilte/urethane composite, glass fiber,
phenolic, polite or wood fiberboard, any thickness.
Base Sheets — One or more layers " POLYFLEX" (heat fused; or mechanically fastened), "ELASTOBASE ", "ELASTOFLEX V", "ELASTOFLEX V-
C" or Type G2 base sheet (hot mopped, heat fused or mechanically fastened).
Membrane: — "DUFLEX G FR ", "POLYFRESKO TORCH FR" or " POLYFLEX G FR" (modified bitumen), heat fused.
6. Deda C -15/32 incline: 1/2
Base Sheep — One or more layers "POLYFLEX" or "POLYGLASS Base° (heat fused or mechanically fastened), "ELASTOBASE ",
"ELASTOFLEX V", "ELASTOFLEX V-C" or Type G2 base sheet (hot mopped, heat fused or mechanically fastened).
Ply Sheet: — One or more layers " POLYFLEX" or "POLYGLASS Base" (heat fused) or "POLYGLASS Base ", "ELASTOBASE ", "ELASTOFLEX V ",
"ELASTOFLEX V -C" or Type G2 base sheet (hot mopped) or mechanically attached.
Membrane: — °DUPLEX G FR ", "POLYFRESKO TORCH FR" or "POLYFLEX G FR' (modlfled bitumen), heat fused.
7. Dada C -15/32 Incline: 1/2
Insulation: — perlltee/uurethane composite (2 In tmin) orl(2,In. main) glass
covered in. Iln. perli��rpwood�flberboard�mposlte,
1..i ._.,,1_._L___ ..I ......../,,,.: 1, :«/VVV /fpmn1 s: tP./ T. TSF., XT /1FRAME /showpage.html?name =T... 9/15/2011
1 lit U.K143 /1 - xoonng oysrxms
Base Sheet — One or more layers " POLYFLEX" (heat fused or mechanically fastened), "ELASTOBASE °, "ELASTOFLEX V°, "ELASTOFLEX V-
C" (heat fused, mechanically fastened or hot mopped) or Type G2 base sheet (hot mopped or mechanically fastened). G2 base sheet
Ply Sheet — One or more layers " POLYFLEX" (heat fused) ELASTOBASE , ELASTOFLEX V , ELASTOFLEX V -C' or Type
(hot mopped) or mechanically fastened.
Membrane: — "DUPLEX G FR", "POLYFRESKO TORCH FR° or " POLYFLEX G FR" (modified bitumen), heat fused.
8. Dedc NC Incline: 1/2
Insulation (Optional): — PolyIsocyanurate, urethane, perilte/polyIsocyanurate composite, perllte/urethane composite, glass fiber or wood
fiberboard, phenolic or perilte, any thickness.
Base Sheet — One or more layers " POLYFLEX" (heat fused or mechanICaily fastened), "ELASTOBASE °, "ELASTOFLEX V°, "ELASTOFLEX V-
C° (hot mopped, mechanically fastened or heat fused) or Type G2 base sheet (hot mopped or mechanically fastened).
Membrane: — "ELASTOSHIELD TS G FR ", "ELASTOFLEX S6 G FR° or "POLYFRESKO MOP FR° (modified bitumen), hot mopped or heat
fused.
9. Decla C -15/32 Incline: 1/2
Base Sheet — One or more layers „ POLYFLEX„ (heat fused or mechanically fastened), "ELASTOBASE ", "ELASTOFLEX V° or Type G2 base
sheet (hot mopped or mechanically fastened).
Ply Sheet — One or more layers " POLYFLEX" (heat fused), "ELASTOBASE °, "ELASTOFLEX V ", "ELASTOFLEX V -C" or Type G2 base sheet
(hot mopped or mechanically attached).
Membrane: — 'ELASTOFLEX S6 G FR', "POLYFRESKO MOP FR" or °ELASTOSHIELD TS G FR" (modified bitumen), hot mopped or heat
fused.
10. Dada C -15/32 Incline: 1/2
Insulation: — Polylsocyanurate (2 In. min), perlite (3/4 In. min), glass fiber (15/16 In. min), perlite/polylsocyanurate composite,
perllte/urethane composite (2 In. min).
Base Sheet — One or more layers " POLYFLEX" (heat fused or mechanically fastened), „ ELASTOBASE ", "ELASTOFLEX V", "ELASTOFLEX V-
C" or Type G2 base sheet (hot mopped or mechanically fastened).
Ply Sheet — One or more layers " POLYFLEX" (heat fused), "ELASTOBASE ", "ELASTOFLEX V ", "ELASTOFLEX V-C" or Type G2 base sheet
(hot mopped or mechanically attached).
Membrane: — "ELASTOFLEX S6 G FR ", "POLYFRESKO MOP FR° or "ELASTOSHIELD TS G FR" (modified bitumen), hot mopped or heat
fused.
11. Deck: NC Incline: 1
Insulation (Optional): — Cellular concrete, gypsum concrete, vermiculite concrete, periite concrete or structural concrete.
Primer: — Not UL Classified — as required by manufacturer.
Membrane: — "POLYBOND ", "POLYBOND G ", "POLYFLEX", " POLYFLEX G ", " POLYFLEX G FR ", "POLYFRESKO TORCH FR ", " POLYFLEX",
" POLYFLEX G ", " DUFLEX G FR" or " POLYFLEX G FR ".
Surfadng: — (not required for " POLYFLEX G FR ", "POLYFRESKO TORCH FR" or " DUFLEX G FR" ) "PG 800 Asphalt Emulsion Roof Coating °,
applied at 3 -4 gal/sq. or Monsey Products "Endure Aluminum Roof Coating ", at 1.5 gal /sq; or Grundy Industries "al MB Aluminum Roof
Coating ", at 1 -2 gaUsq; or Brewer °Fortress 5001 Asphalt Emulsion ", applied at 4 gal. /sq., followed by "PolyPlus 60 ", applied at 3 -1
gal. /sq.
12. Deck: NC Incline° 1
Insulation (Optional): — Any thickness, one or more layers UL Classified periite, wood fiber, glass fiber, polylsocyanurate,
polylsocyanurate/composlte, EPS /wood fiber, EPS /perlite or EPS /composite.
Base Sheet — One or more layers Type 61 or G2.
Membrane: — One or more layers "POLYBOND ", "POLYBOND G ", " POLYFLEX" or "POLYFLEX G" (modlfled bitumen), heat fused.
Surfadng: — "PG 800 Asphalt Emulsion Roof Coating ", applied at 3 -4 gaUsq. or Fields "F350 Heat Shield Aluminum Coating" or "F630
Heat Shield Flbered Aluminum Coating ", 1 -1/2 gaUsq; or Brewer "Fortress 5001 Asphalt Emulsion ", applled at 4 gal./sq., followed by
"PolyPlus 60 ", applled at 3/4-1 gal. /sq.
13. Deck: NC Incline: 1/2
Barrier Board (Optional): — 1/2 In. gypsum board.
Insulation (Optional): — Polyisocyanurate, any thickness.
Base Sheet (Optional): — Type G2, "ELASTOBASE ", "ELASTOFLEX V ", "ELASTOFLEX V-C' or "POLYFLEX ".
Membrane: — " POLYFLEX G FR ", "POLYFRESKO TORCH FR ", "DUPLEX G FR" (heat fused), "ELASTOFLEX S6 G FR ", "POLYFRESKO MOP
FR" (hot mopped) or "ELASTOSHIELD TS G FR" (heat fused or hot mopped).
14. Deck: C -15/32 Incline: 1
Insulations — 1/4 In. thick G-P Gypsum DensDeck ®, perlite, wood fiber or glass fiber, 1 In., mechanically fastened.
Ply Sheet — Type G2, mechanically fastened.
Membrane: — "POLYBOND ", " POLYFLEX" (modified bitumen), heat welded.
Surfadng: — °PG 800 Asphalt Emulsion Roof Coating ", applled at 3-4 gaUsq. or Monsey Products "Endure Aluminum Roof Coating ",
"Weather Check" or "Pro-Grade Aluminum Roof Coating ", 1.5 gal /sq; or Brewer "Fortress 5001 Asphalt Emulsion ", applled at 4 galdsq.,
followed by "PolyPlus 60 ", applied at i4 -1 gal. /sq.
1.J1 V.1t1T✓ I i " 1•Vyauag
15. Dean NC Iodine: 1/2
Insulation (Optional): — Polyisocyanurate, perlite, glass fiber or wood fiberboard, any thickness.
Base Sheets — On ply Type G2, hot mopped or mechanically fastened or "ELASTOBASE ", heat fused, hot mopped or mechanically
fastened.
Membrane: — "ELASTOFLEX S6 G FR ", " POLYFRESKO MOP FR° or ° ELASTOSHIELD TS G FR" hot mopped or heat fused.
16. Deds: C -15/32 Iodine: 1/2
Base Sheet: — One ply Type G2 or "ELASTOBASE ", mechanically fastened.
Ply Sheet — One ply Type G2 (hot mopped or mechanically fastened) or "ELASTOBASE" (hot mopped, heat fused or mechanically
fastened).
Insulation (Optional): — Polylsocyanurate, perlite, glass fiber, any thickness.
Membrane: — "EIASTOFLEX S6 G FR ", " POLYFRESKO MOP FR" or, ELASTOSHIELD TS G FR ° hot mopped or heat fused.
17. Decks C -15/32 Udine: 1/2
Insulation: — Polylsocyanurate (2 In. min), glass fiber (15/16 In. min), perllte/polyisocyanurate composite, perlite/urethane composite (2
In. min).
Base Sheet — One or more layers "POLYFLEX" (heat fused or mechanically fastened), "ELASTOBASE ", "ELASTOFLEX V", "ELASTOFLEX V-
C" (hot mopped or heat fused) or Type G2 base sheet (hot mopped or mechanically fastened).
Ply Sheet (Optional): — One or more layers "POLYFLEX" (heat fused), "ELASTOBASE °, "ELASTOFLEX V", "ELASTOFLEX V-C" (hot mopped
or heat fused) or Type G2 base sheet (hot mopped or mechanically fastened).
Membrane: — "DUFLEX G FR °, " POLYFRESKO TORCH FR° or "POLYFLEX G FR" (modified bitumen), heat fused.
18. Deck: C -15/32 Incline: 1/2
Insulation: — Polylsocyanurate (2 In. min), glass fiber (15/16 In. min), perlite/polylsocyanurate composite, perlite/urethane composite (2
In. min).
Base Sheet: — One or more layers "POLYFLEX" (heat fused or mechanically fastened), "ELASTOBASE ", "ELASTOFLEX V" or Type G2 base
sheet (hot mopped or mechanically fastened).
Ply Sheet (Optional): — One or more layers "POLYFLEX" (heat fused), "ELASTOBASE ", "ELASTOFLEX V", "ELASTOFLEX V-C" or Type G2
base sheet (hot mopped or mechanically fastened).
Membrane: — • ELASTOFLEX S6 G ", "ELASTOFLEX S6 G -C° or "POLYFRESKO MOP" (modified bitumen), hot mopped.
19. Deck C -15/32 Incline:1
Insulation: — 1/4 In. thick G-P Gypsum DensDeck ®, perlite, wood fiber or glass fiber, 1 In., mechanically fastened.
Ply Sheet: — Type G2, mechanically fastened.
Membrane: — "POLYFLEX ", heat welded.
Surfadnp: Monsey Products "Endure Aluminum Roof Coating", "Weather Check" or "Pro -Grade Aluminum Roof Coating ", 1.5 gal /sq; or
—
Brewer "Fortress 5001 Asphalt Emulsion °, applied at 4 gal. /sq., followed by "PolyPlus 60 ", applied at alts -1 gal. /sq..
20. Decks C -15/32 Incline: 2 -1/2
Barrier Board: — 1/4 In. (min) G -P Gypsum DensDeck® with all joints staggered 6 In. from the plywood joints.
Base Sheet — Type G2, mechanically fastened.
Membrane: — "POLYFLEX G FR" or " POLYFRESKO TORCH FR ", heat fused in place.
21. Deck C -15/32 Incline: 2
Insulation (Optional): — Polylsocyanurate, perlite, wood fiber or polyisocyanurate / perlite board, any thickness.
Barrier Board: — 1/4 in. (min) G -P Gypsum DensDeck ®, mechanically fastened with all joints staggered 6 In. from the plywood joints.
Base Sheet — "ELASTOBASE" (poly /sand), mechanically fastened or "ELASTOFLEX SA V PLUS FR "or "ELASTOFLEX SA V FR BASE
VENT" (self adhered).
Ply Sheet (Optional): — "ELASTOFLEX SA V PLUS FR" or "ELASTOFLEX SA V FR BASE VENT°, (self adhered).
FR lir"Membrane: self adhered) or "POLYFLEX G FR°,F"POLYFRESKO TORCH FR", "DUFLEX G FR", "ELASTOFLEX S6 G FR °°, "POLYFRESKO F ", V
° ELASTOSHIELD TS G FR ", heat fused.
22. Deck: C -15/32 Incline: 1/2
Insulation (Optional): — Polyisocyanurate 1.5 in. (min.) with all joints staggered 6 -In. (min.) from the plywood joints.
Base Sheet — Type G2, mechanically fastened followed by "ELASTOBASE ", mechanically fastened.
Ply Sheet (Optional): — "ELASTOFLEX SA V PLUS FR" or "ELASTOFLEX SA V FR BASE VENT", (self adhered).
Membrane: — "POLYFLEX SA P FR ", " POLYFRESKO APP SA P FR ", "ELASTOFLEX SA P FR ", " POLYFRESKO SBS SA P FR °, or "DUFLEX G FR ",
"POLYFLEX G FR ", "ELASTOFLEX S6 G FR ", " POLYFRESKO MOP FR ", " ELASTOSHIELD TS G FR ", heat fused.
23. Decks NC Incline: 2
! u1' U .1C1'+. / 1 - iwui lg ay bloulo
v
Insulation ( Optional): — Atlas Roofing "ACFoam 1II" or "ACFoam II" or Hunter Panels "H- Shield ", any thickness.
Base Sheet — "ELASTOBASE" (poly /sand), heat fused or mechanically fastened or "ELASTOFLEX SA V FR °, "ELASTOFLEX SA V PLUS FR"
or "ELASTOFLEX SA V FR BASE VENT", (self adhered).
Membrane: — "POLYFLEX SA P FR ", " POLYFRESKO APP SA P FR ", "ELASTOFLEX SA P FR ", " POLYFRESKO SBS SA P FR ", 'ELASTOFLEX SA V
FR HT", (self adhered) or "POLYFLEX G FR ", " POLYFRESKO TORCH FR ", "OUFLEX G FR ", °ELASTOFLEX S6 G FR", "POLYFRESKO MOP FR ", °
ELASTOSHIEL D TS G FR', heat fused.
24. Deck: C -15/32 Incline: 3
Insulation (Optional): — Polyisocyanurate, periite, wood fiber or poiylsocyanurate/perllte board, any thickness.
Barrier Board: — 1/4 In. (min) G-P Gypsum DensDeck ®, mechanically fastened with all joints staggered 6 In. from the plywood joints.
Base Sheet: — "ELASTOBASE" (PclY /sand), mechanically fastened.
Ply Sheet (Optional): — "ELASTOFLEX SA V PWS FR" or "ELASTOFLEX SA V FR BASE VENT", (self adhered).
Membrane: — °ELASTOFLEX S6 G FR° or " POLYFRESKO MOP FR ", heat fused.
25. Deda NC Incline: 3
Insulation (Optional) : — Atlas Roofing "ACFoam III" or "ACFoam II° or Hunter Panels °H- Shield ", any thickness.
Base Sheet — "ELASTOFLEX SA V PWS FR" or "ELASTOFLEX SA V FR BASE VENT' (self adhered).
Membrane: — POLYFLEX SA P FR ", " POLYFRESKO APP SA P FR °, "ELASTOFLEX SA P FR" or " POLYFRESKO SBS SA P FR° (self adhered).
26. Deck: NC Incline: 1/2
Base Sheet: — Type G1 or G2, mechanically fastened.
Membrane: — "POLYFLEX G" or "POLYBOND G ", heat fused.
27. Deck: NC Indine: 3
Membrane: — "POLYFLEX SA P FR ", " POLYFRESKO APP SA P FR ", " POLYFRESKO SBS SA P FR "or "ELASTOFLEX SA P FR" (self adhered).
28. Dedu NC Incline: 1
Insulation (Optional): — Polylsocyanurate, any thickness.
Base sheet (Optional): — "ELASTOFLEX SA V ", "ELASTOFLEX SA V PLUS" or "ELASTOFLEX SA V BASE VENT", self - adhered or
•ELASTOBASE° (poly /sand), mechanically fastened.
Membrane: — "POLYFLEX SA P" or "POLYFRESKO APP SA P" self - adhered.
29. Deck: C -15/32 Iodine: 1/2
Insulation: — Polylsocyanurate (2 In. min), glass fiber (15/16 in. min), perlite/polyisocyanurate composite, perlite/urethane composite (2
In. min).
Barrier Board: — 1/4 In. (min) G -P Gypsum DensDeck ®, mechanically fastened, with 6 In. offset to plywood joints.
Base Sheet: — "ELASTOFLEX S6 ", "ELASTOFLEX P -C" (heat fused or mechanically fastened).
Membrane: — "ELASTOFLEX S6 G ", "ELASTOFLEX 56 G-C" or "POLYFRESKO MOP ", (heat fused).
30. Deck: NC Incline: 1/2
Insulation (Optional) — Atlas Roofing "ACFoam III" or "ACFoam II ", any thickness.
Base Sheet: — "ELASTOFLEX SA V PLUS FR" or "ELASTOFLEX SA V FR BASE VENT", (self adhered).
Membrane: — "POLYKOOL SA" (self adhered).
31. Dada 5/32 Incline: 1/2
Base Sheet: — G2 Base sheet mechanically fastened followed by "ELASTOFLEX SA V PLUS FR" or "ELASTOFLEX SA V FR BASE VENT", (self
adhered).
Membrane: — "POLYKOOL SA" (self adhered).
32. Dada NC Incline: 1/2
Insulation (Optional): — Polylsocyanurate, any thickness.
Base sheet (Optional): — "ELASTOFLEX SA V PLUS" or "ELASTOFLEX SA V BASE VENT", self- adhered or "ELASTOBASE" (poly /sand),
mechanically fastened.
Membrane: — "ELASTOFLEX 56 G ", "ELASTOFLEX S6 G -C" or " POLYFRESKO MOP ", heat fused.
33. Dada NC Incline: 1 -1/4
Insulation (Optional): — Any UL Classified isocyanate or polyurethane, any thickness.
1 yr L1.Ai•tJ / L - AVVlulg ,-,,y OW1120
Base sheets — "EIASSTOFLEX SA V PLUS FR° or "ELASTOFLEX SA V FR BASE VENT", self adhered.
Membrane: — "POLYKOOL SA" self adhered.
34. Deck: NC
Incline: 1
Insulation (Optional): — Any UL Classified polylsocyanate, any thickness.
Base Sheet -- "ELASTOFLEX SA V PLUS FR" or "ELASTOFLEX SA V FR BASE VENT", self adhered.
Membrane: — "POLYBIANKO APP SAP ", self adhered.
35. Dada NC Incline: 1
Insulation (Optional): — Polyisocyanurate, glass fiber, perllte or wood fiberboard any thickness, any combination, mechanically fastened
or hot mopped In place.
B ase Sheet: — Type G2, "ELASTOBASE ", "MODIBASE" or "ELASTOFLEX V", mechanically fastened.
P ly sheet (Optional): — Type G2, "ELASTOBASE ", "MODIBASE" or "ELASTOFLEX V", V ELASTOFLEX 56 ", " POLYFLEX" or "DUFLEX"
adhered with Alco Products "SBS Modified Bitumen Adhesive No. 269" at 1 to 1-1/2 gal /sq.
Membrane: — "ELASTOFLEX G S6 FR °, "ELASTOFLEX VG FR ", ELASTOSHIELD T8.4 FR ", "POLYFLEX G FR° (sand - backed) or DUPLEX G
FR° (sand - backed), adhered with Alto Products "SBS Modified Bitumen AdhesiveiNo. 269" at 1 to 1 -1/2 ga/sq•
36. Dedu C -15/32 Incline: 1
Insulation (Optional): — Polylsocyanurate (1.3 in. min), glass fiber (7/16 In. min) or periite (3/4 In. min), mechanically fastened or hot
mopped in place.
Base Sheet: — Two plies Type G2, flrst ply mechanically fastened and the second ply fully adhered with Alco Products "SBS Modified
Bitumen Adhesive No. 269" at 1 to 1 -1/2 gal/sq•
Membrane:
Products °SBS "ELASTOFLEX difi G S6 FR", ", "ELASTOFLEX v 9° at i ", L ST S gal/sq. � FR", "POLYFLEX G FR" ( sand-backed), adhered with
37. Deck: C -15/32 Inclines 1
Barter Board: — 1/4 In. (min) G-P Gypsum DensDeck ®, mechanically fastened with all joints staggered 6 In. from the plywood joints.
Insulation (Optional): — Polylsocyanurate, glass fiber, wood fiberboard, any thickness, mechanically fastened.
Base sheet — Type G2, one or more piles, mechanically fastened.
Ply sheet (Optional): — Type G2, "ELASTOBASE ", "ELASTOFLEX V°, "POLYFLEX" or "DUFLEX" (sand - backed) adhered with Aico Products
"SBS Modified Bitumen Adhesive No. 269° at 1 to 1-1/2 gal/sq.
Membrane: d "ELASTOFLEX Products °SBS Modified "ELASTOSHIELD
Adhesive No. 269" "POLYFLEX G FR2 (sand - backed) or DUFLEX G FR" (sand - backed),
38. Deck: NC Incline: 1
any thlcknes(s or polystyrene al any th chness covered with / I . petite, 1/4 in. (rein) G-P GypsumHDensDec ®, fiberboard, 6 In. lass fiber or 1 In.
wood fiberboard, mechanically fastened.
Base Sheet: — °Type G2, "ELASTOFEX V", adhered with Alco Products °SBS Mddlfled Bitumen Adhesive No. 269" at 1 to 1 -1/2 gel/se.
Membrane: — "ELASTOFLEX G S6 FR ", "ELASTOFLEX VG FR ", ELASTOSHIELD'fS4 FR ", " POLYFLEX G FR" (sand-backed) or DUPLEX G
FR" (sand - backed), adhered with Alco Products "SBS Modified Bitumen Adhesive No. 269° at 1 to 1 -1/2 gal/sq•
Class B - Fully Adhered
1. Dada C -15/32
Base Sheet: — Two or more layers "POLYFLEX" (mechanically fastened or heap fused), "ELASTOBASE ", Type G2 GAF Building Materials
"GAFGIas #75 ", Johns Manville "GLASBASE" or Ceiotex "Vaporbar GB" (mechanically fastened or hot mopped In place).
Membrane: — " POLYFLEX G" (modified bitumen), heat welded.
Incline: 1/4
2. Deck C -15/32 Udine: 1/2
insulation
ooilyl oc anuratte/composlte, EPS /wood fiber, EPS /perlite layers
r EPS /eo posite root insulation.ber, glass fiber, polyisocyanurate,
sp.Sheet: — One or more layers Type Gi or G2.
ri e: — One or more layers " POLYFLEX G FR ", "POLYFRESKO TORCH FR', °POLYBOND ", "POLYBOND G ", " POLYFLEX" orteCiL
odified bitumen), heat fused.
Surfacing: — "PG 800 Asphalt Emulsion Roof Coating °, applied at 3-4 ga/sq. dr Fields "F530 Heat Shield Aluminum Coating* or °F630
Heat Shield Flbered Aluminum Coating ", 1 -1/2 gal /sq; or Monsey Products "Enure Aluminum Roof Coating ", "Weather Check" or °Pro-
Grade Aluminum Roof Coating ", 1 -1/2 gal /sq; or Brewer °Fortress 5001 Asphalt Emulsion ", applied at 4 gal. /sq., followed by "PolyPius 60 ",
applied at 3/4-1 gal. /sq.
3. Deck: C -15/32
Incline: 1 -1/2
Base Sheet: — Type G2 or "ELASTOBASE ", mechanically fastened.
1 ur u.lwi'tJ / 1 - Auutttlg uy aLculo
PIy Sheet — "Polyglass Base °, heat fused.
Membrane: — " POLYFLEX G FR° or " POLYFRESKO TORCH FR" (modified bitumen), heat fused.
4. Deck 15/32 Incline: 1 -1/2
Insulation: — Glass fiber (15/16 in. min.), mechanically fastened.
Base Sheet: — Type G2 base or "ELASTOBASE ", hot mopped or mechanically fastened.
Membrane: — " POLYFLEX G FR" or " POLYFRESKO TORCH FR° (modified bitumen), heat fused.
5. Dade C -15/32 Incline: 1/2
Base Sheets — Type G2, mechanically fastened.
Membranes — " POLYFLEX G" or "POLYBOND G °, heat fused.
6.. Deck: NC Iodine: 1
Insulation (Optional): — Polylsocyanurate, any thickness.
Base sheet (Optional): — "ELASTOFLEX SA V PLUS° or °ELASTOFLEX SA V BASE VENT", self - adhered or "ELASTOBASE" (poly /sand),
mechanically fastened.
PIy Sheet (Optional): — 'POLYFLEX ", heat fused.
Membrane: — 'POLYFLEX SA r, " POLYFRESKO APP SA r, "ELASTOFLEX SA P ", " POLYFRESKO SBS SA P", self- adhered or 'POLYFLEX G ",
heat fused.
7. Deck: C -15/32 Incline: 1 /2
Insulation (Optional): — Polylsocyanurate, any thickness.
Barrier Board: — 1/4 -In. (min) GP Gypsum DensDeck® or DensDeck Prime ®, mechanically fastened.
Base sheets — "ELASTOBASE" (poly /sand), mechanically fastened.
Ply sheet (Optional): — "ELASTOFLEX SA V PLUS" or "ELASTOFLEX SA V BASE VENT", self - adhered.
Membrane: — " POLYFLEX SA P ", " POLYFRESKO APP SA P ", "ELASTOFLEX SA P ", " POLYFRESKO SBS SA P ", self- adhered or 'POLYFLEX G ",
heat fused.
8. Deck: C -15/32 Incline: 1/4
Base sheet (Optional): — "ELASTOBASE° (poly /sand), mechanically fastened.
Ply Sheet: — "ELASTOFLEX SA V PLUS" or "ELASTOFLEX SA V BASE VENT', self- adhered or "ELASTOBASE ", mechanically fastened.
Membrane: — " POLYFLEX SA r, "POLYFRESKO APP SA P ", "ELASTOFLEX SA P", " POLYFRESKO SBS SA P ", self- adhered or 'POLYFLEX G ",
heat fused.
9. Deck NC Incline: 1
Insulation: — Any UL Classified, any thickness.
Barrier Board: — 1/4, 3/8, 1/2 or 5 /8-In. thick USG Corp "SECUROCKTM Roof Board (Type FRX -G)"
ease sheet (Optional): — "ELASTOFLEX SA V PLUS" or "ELASTOFLEX SA V BASE VENT", self- adhered or "ELASTOBASE" (polY /mod),
mechanically fastened.
Ply Sheet (Optional): — "POLYFLEX ", heat fused.
Membrane: — " POLYFLEX SA P ", " POLYFRESKO APP SA P', "ELASTOFLEX SA P °, " POLYFRESKO SBS SA P ", self- adhered or 'POLYFLEX G °,
heat fused.
10. Deck: C -15/32 Incline: 2
Insulation (Optional): — Polylsocyanurate, perllte, wood fiber or polylsocyanurate/perlite board, any thickness.
Barter Boards — 1/4 in. (min) G -P Gypsum DensDeck®, mechanically fastened with all joints staggered 6 In. from the plywood joints.
Base Sheet: — "ELASTOBASE" (poly /sand), mechanically fastened, heat fused or hot mopped.
Ply Sheet (Optional): — "ELASTOBASE" (poly /sand), mechanically fastened, heat fused or hot mopped.
Membrane: — " POLYFLEX SA P FR ", " POLYFRESKO APP SA P FR ", "ELASTOFLEX SA P FR ", " POLYFRESKO SBS SA P FR ", "ELASTOFLEX SA V
FR HT", (self adhered) or " POLYFLEX G FR ", " POLYFRESKO TORCH FR ", "DUPLEX G FR ", "ELASTOFLEX S6 G FR ", " POLYFRESKO MOP FR °,
"ELASTOSHIELD TS G FR ", heat fused or hot mopped.
Class C - Fully Adhered
1. Deck: C -15/32 Incline: 2
Base Sheet: — Johns Manville "Perma PIy IV" (Type G2).
Membrane: — "POLYBOND G ", " POLYFLEX G ", " POLYFRESKO TORCH FR" or "POLYFLEX G FR" (modified bitumen), heat welded.
OTHER SYSTEMS
1 VI: V.1 %1 I a - aw■auab v, uwau..
1. Deck: C -15/32 or spaced sheathing Incline: Unlimited
Underlayment: — One layer Elk Corp "VersaShleld ", mechanically fastened.
Ply Sheet — One ply "Polystick MTS° (self adhered).
Surfacing: — Any UL Usted or Classified copper or steel standing seam panels or shingles, 26 gauge min.
2. Deck: NC Incline: Unlimited
Insulation: — Any UL Classified polylsocyanurate, any thickness.
Underlayment — One ply " Polystick MTS" (self adhered).
Surfacing: — Any UL Usted or Classified copper or steel standing seam panels or shingles, 26 gauge min.
MAINTENANCE AND REPAIR SYSTEMS
Class A, B and C
1. Deck: C -15/32 Incline: 1
Existing Roof System: — (To maintain existing Classifications) - Any Class A, B or C, uncoated, insulated or uninsulated, modified
bitumen membrane or Type G3 mineral surfaced cap BUR system.
Base Coat — "PG 800 Asphalt Emulsion Roof Coating ", applied at 3-4 gal /sq. or Brewer "Fortress 5001 Asphalt Emulsion ", applied at 4
gal. /sq.
Top Coat: — "PolyBrite 70 ", applied at 1.5 gal. /sq.
2. Deck: C -15/32 Incline: 1
Existing Roof System: — (To maintain existing Classifications) - Any Class A, B or C, uncoated, insulated or uninsulated, modified
bitumen membrane or Type G3 mineral surfaced cap.BUR system.
Base Coat: — "PG 800 Asphalt Emulsion Roof Coating ", applied at 3 -4 gal /sq. or Brewer "Fortress 5001 Asphalt Emulsion ", applied at 4
gal. /sq.
Top Coat — "PolyPlus 60 ", applied at 3/4-1 gal. /sq.
j ast Undated on 2011 -08 -23
Questions? print this oaaq Notice of Disclaimer page Too
Coovriaht a 2011 Underwriters Laboratories Inc,®
The appearance of a company's name or product in this database does not In itself assure that products so Identified have been
manufactured under UL's Follow -Up Service. Only those products bearing the UL Mark should be considered to be Listed and covered under
UL's Follow -Up Service. Always look for the Mark on the product.
UL permits the reproduction of the material contained In the Online Certification Directory subject to the following conditions: 1. The Guide
Information, Designs and /or Listings (files) must be presented In their entirety and In a non - misleading manner, without any manipulation
of the data (or drawings). 2. The statement °Reprinted from the Online Certifications Directory with permission from Underwriters
Laboratories Inc." must appear adjacent to the extracted material. In addition, the reprinted material must Include a copyright notice In the
following format: "Copyright O 2011 Underwriters Laboratories Inc. ®"
An independent organization working for a safer world with Integrity, precision and knowledge.
•■• /s /• r /n n 1 1
Cap Sheet -
Roofing Guide Specification For.
• WATERPROOFING MATERIALS AND INSULATING SYSTEMS
POLYGLASS
F;
f la NAPE! q,
Spec # 200W APP TOR
Project Name: DELI
Address: 345 Andover Park East
City, State, Zip: Tukwila,WA,98188
Size: 5,600
PILE COPY
REVIEWED FOR
CODE COMPLIANCE
APPROVED
NOV 2 8 2011
City of Tukwila
BUILDING DIVISION
Base Sheet - --. -
(Mechanicaiiy
Attached,
Per Specification)
Base Sheet : Polyglass Base
Cap Sheet : Polyflex G
Prepared by:
Neisinger, William
Please see the POLYGLASS Technical Guide or contact POLYGLASS Technical Support for further information
regarding slope limitations and specific application requirements a POLYGLASS Torch Applied Roofing System.
This specification is provided as a general guide for use of POLYGLASS products based on typical building conditions
and standard roofing practices. POLYGLASS is strictly a manufacturer of roofing systems and has no experience,
training or expertise in the areas of architecture/engineering or in the area of consulting with respect
itrt
- related
CITY OFftTU VIII LA
Nov 1 5-1011
PERMIT CENTER
to such areas.
O
M,PEI
PART 1 GENERAL
1.01 General Notes
Preceding the start up of job, the contractor
shall decide to his satisfaction that all the
specifications are workable as specified, that
there is nothing that would deter the
contractor s required warranty, and that no
existing conditions at the site prevent the
contractor from performing the job in a
professional and safe manner. When the job
starts, it will be assumed that the contractor
approves the existing conditions and the
specifications.
1.02 Description
Provide all labor, materials, equipment,
supervision and incidentals as needed to
install a complete Polyglass reinforced
modified bituminous roofing system over a
new or accepted, prepared exiting roof
substrate. All details of installation shall
conform to Polyglass Specifications, Details
and General Recommendations.
1.03 Quality Assurance
Products used in the work of this Section
shall be manufactured by Polyglass or
accepted for use in conjunction with the
products manufactured by Polyglass. The
Roofing Contractor and his personnel shall
be currently accepted by Polyglass as
qualified to install the materials of this
section. Do not apply roofing during
inclement weather. Do not apply roofing
membrane to damp frozen, dirty or dusty
surfaces.
Part 2 PRODUCTS
2.01 Polyglass Base - An APP modified
bitumen roofing membrane base sheet.
reinforced with a fiberglass mat, saturated
and coated with a polymerized asphaltic
compound with exceptional waterproofing
2.02
2.03
2.04
2.05
2.06
Page 2
mom
and weatherability. Specially designed for
heat welding, cold -apply and mechanically
attached applications. Top and bottom
surfaces are finished with poiyolefin film or
sand.
Polyflex 0 - Premium, polyester
reinforced APP modified bitumen roofing
membranes specially designed for heat
welded and cold -apply applications.
Membrane is also used as a flashing in all
applicable specifications, in accordance
with recommended installation practices.
Membrane is polyester reinforced,
lightweight, weather resistant and durable.
Top surface of membrane is granular
except at selvage, which is granule free.
Asphalt Primer Meeting ASTM D 41
specification, applied in strict conformance
to manufacturers recommendations.
Asphalt Meeting ASTM D 312 Type III or
IV. Follow installation recommendations of
the NRCA (National Roofing Contractors
Association)
Surface Coating (where required by
specification) emulsion coating, asphalt
latex emulsion roof surfacing material,
asphaltic based aluminum roof coating
(fibrated or non - fibrated) or a colored
acrylic coating, may be required to meet
necessary fire code approvals. Consult
Polyglass Technical Service Department,
1- 800 - 894 -4563 for fire rated assembly
information.
Product Handling
a. All materials, except those that are shop
fabricated shall be delivered to the job
site with their original labels intact. Bulk
materials shall be identified by the
manufacturer as to specification issued.
b. All materials shall be stored in
accordance with the instructions of the
manufacturer prior to their application or
installation. No wet or damaged materials
will be used in the application. Materials
stored on the job site shall be a minimum
4" off the ground of the roof.
c. Application of all roofing shall be
accomplished in such a way that each
area will be complete at the end of each
days work. All roof edges and incomplete .
flashing shall be protected against water
entry, particularly between work periods.
d. When ambient temperature is below 40
degrees F, care must be exercised in
handling and storing Polyglass
membrane. Only rolls for immediate
application shall be exposed to the
elements. All masonry, concrete and
sheet metal surfaces incorporated into the
roof system shall be primed with asphalt
primer meeting ASTM 0-41 specification
and allowed to dry prior to installing
bituminous roofing materials.
e. Wood curbs or milers, where required,
shall be pressure treated with accepted
pressure treatment meeting AWAP
Standard P-5.
Part 3 Execution
3.01 General Preparation
The roof surface, which is to receive the
Polyglass roofing system, shall be smooth,
clean, free from loose gravel, dirt and debris,
dry and structurally sound
3.02 Reroofing
a. Remove existing roof fleshings from curbs
and parapet walls down to the surface of
the roof. Remove existing fleshings at
roof drains and roof penetrations.
b. Remove all wet, deteriorated, blistered or
delaminated roofing membrane or
insulation and fill in any low spots
occurring as a result of removal work, to
create a smooth even surface for
application of new roof membranes.
c. Existing roof surfaces shall be primed as
necessary with asphalt primer meeting
ASTM D-41 specification and allowed to
dry prior to installing the Polyglass roofing
system.
3.03 Installation
a. Decks Prime where required, in
accordance with requirements and
recommendations of the primer and deck
manufacturer (if applicable).
b. Where a vapor retarder Is required by
the specifier Follow the instructions with
regard to the particular materials specified
and install in accordance with the
recommendations of the manufacturer
and the requirements of the architect.
3.04 Membrane
a. The corresponding application methods
will appear here
b. For each method selected
3.05 Flashing
a. The flashing shall be installed using
Polyglass flashing sheets and minimum
8" wide Polyglass stripping sheets. The
stripping sheet shall be installed with a
minimum of three inches In both the
horizontal and vertical surfaces. The
flashing sheets shall be installed with a
minimum of six inches on the horizontal
surface and extend a minimum of eight
inches above the finished roof surface.
b. The flashing sheets shall be installed by
the same application method used for the
roof membranes. In hot mop applications
the flashing sheets may be installed by
heat weld application provide the proper
flashing materials are utilized. The top
edge of the flashing sheet shall be
secured using a termination bar (only
when the wall surface above is
waterproofed), or nailed 4" on center and
covered with an acceptable counter
flashing.
c. Items related to reproofing operations
such as sheet metal gravel stops, roof
vents, and similar items shall be
incorporated into the new roof system in
accordance with the recommendations
described in the current Issued of the
Polyglass "Specifications and Details"
manual
NOTE: Never use torch or apply torched
materials to areas of combustible materials.
Any combustible material must first be overlaid
with a protective barrier or alternatively remove
such materials from the location. Use common
sense in the application of torches. Always
keep a suitable, prepared, fire extinguisher
available at each area where torching occurs.
POLYFLEV G
PRODUCT DESCRIPTION
Polyflex G membranes are premium, polyester reinforced APP modified bitumen roofing
membranes specially designed for heat-welded applications. Constructed with premium
Atactic Polypropylene resins, and incorporating superior polyester reinforcing, Polyflex G
provides an exceptionally durable roofing product which is easy to install and will
provide long -term weathering performance.
With a granulated surface (available in several colors) and either a polyolefin
or sand backing, Polyflex G exceeds all minimum ASTM standards for tensile
strength, puncture resistance and flexibility.
Polyflex G membranes can also be used as flashing membranes in all applicable
specifications, in accordance with recommended installation practices.
USES
• Heat - welded or cold - applied cap sheet
• Applied directly over an acceptable substrate or as part of a multi -ply system
• New roofing, re- roofing, re-cover and for flashing details
FEATURES AND BENEFITS
• Exceptional weathering characteristics
• Puncture and tear resistant
• low -temp flexibility, exceptional tensile strength and elongation properties
TECHNICAL DESCRIPTION
ASTM D5147
Thickness, typical, mm (mils)
4.5 (180)
ASTM D5147
Peak Load @ 23 + / -2C (73.4 + /- 3.6F), MD
and XMD, min, kN /m (lbf/in.)
8.8 (50)
ASTM D5147
Elongation @ 23 + / -2C (73.4 + /- 3.6F), MD
and XMD, min ( %)
23
ASTM D5147
Tear Strength ® 23 + / -2C (73.4 + /- 3.6F),
min, N (lbf)
311 (70)
ASTM D5147
low Temperature Flexibility, max, C (F)
0 (32)
ASTM D5147
Granule Embedment, g
2
AVAILABLE COLORS
Top surface granule protection is available in a variety of colors such as:
Black Buff Chestnut Grey Slate Oak
White Red Blend Pine Green Heather Blend Weatherwood
10/2010
PRODUCT DATA
Coverage (Approx) 100 sq ft
Weight 110 Ibs
Roll Size 32'10' x 39' /e (10m x 1m)
Rolls /Pallet 20
z
0
a'
0
APPLICABLE STANDARDS
• ASTMD6222TypeI
• Miami Dade Code Compliance
• Factory Mutual Approved
• UL Classified for use in class A, B or C
roofs, as listed in the latest Ul'Roofing .
Materials and Systems Directory'
• ICC ESR -2018
• TDI
Cro FM Q _ r�I
PRODUCT WARRANTY
Unless otherwise incorporated into or part of a
supplemental manufacturer's warranty, Polyglass
warrants its producl(s) for a period of 10 years
against manufacturing defects in its product that
directly results in leakage. Warranty coverage
is an annually declining prorated warranty.
WATERPROOFING MATERIALS AND INSULATINO SYSTEMS
POLYGLASS
G R O U P
1- 800 -222 -9782
www.polyglass.com
POLYFLEr G
APPLICATION INSTRUCTIONS
Polyflex G is intended to be used as the primary weathering surface in new or re -roof applications. Polyflex G is to be applied
as the outermost layer of a multi-ply roof system over a compatible Polyglass base or inner ply sheet. Polyflex G may be applied
directly to non-combustible substrates.
• Apply over clean, dry, dust and debris -free substrates. Prime concrete decks prior to application with PG 100
Asphalt Primer.
• When re- roofing, remove all prior roofing materials down to a clean debris -free substrate and properly close-off all
abandoned roof penetrations.
• Concrete or steel decks shall be designed with proper expansion devices.
• Wood decks shall have all joints blocked and properly supported.
• Ensure the fire rating of the assembly over any combustible substrate.
• Ensure the installation of Polyflex G does not prevent the ventilation of existing construction.
• Do not apply over shingles or any granulated surface.
• While installing Polyflex G:
1. Start at the low point of the roof.
2. Unroll the material and allow to relax in the sun for at least 15 minutes.
3. Install with traditional torch roofing techniques ensuring proper heating
the reinforcement.
4. Do not heat the substrate.
5. Position successive rolls providing a minimum 6" end lap and 3° side lap. Asphalt bleed out shall be 1/4' to
3/8° on all seams.
6. Laps shall be rolled with a 6"-wide roller immediately after heat welding.
• Details and flashing may be installed using Polyflex G with torch applied techniques. Do not use cold adhesives or hot
asphalt. Check project details for proper installation requirements.
of the roofing material as not to expose
MANUFACTURING FACILITIES
• Femley, NV
• Hazleton, PA
• Winter Haven, FL
AU. DATA 8M00 WEBS 10 STANDMD PRODUCTION AND 0 Gras N oo00 MIN WITHIN r011 APPUCATLE MANUMCNDNO AND runs ?MUUMUU.
PULYMAV URA. RIC. MUM DM MONT TO NPRONE AND PIANOS ITS PRODUCTS AT ANY NAt WITHOUT PRIOR NOTICE. P)LY61ASS USA INC. CANNOT SS I LD
1101410J TOR ON USE OF ITS PRODUCTS UNDER CONDITIONS BEYOND ITS OWN CONTROL.
WATERPROOFING MATERIALS AND INSULATING STRUMS
MANI
1- 800 -222 -9782
www.polyglass.com
Back to Thermal Insulation Standards
ASTM C728 - 05(2010) 0
ASTM C728 - 05(2010) Standard Spedficatlon for Perlite Thermal Insulation Board
Active Standard ASTM C728 Developed by Subcommittee: C16.22 (Book of Standards Volume: 04.06
Buy Standard (PDF)
Buy Standard (Print)
more info 3 pages $ 34.00
more info 3 pages $ 34.00
ASTM C728
Abstract
This specification covers the composition and physical properties for perlite thermal insulation
board used principally above structural roof decks and as a base for built -up, modified, and
elastomeric membrane roofing in building construction. Perlite thermal insulation board is classified
as follows: type 1 -.ro0 e ; a tai a 0 . and type 2 -yob ' d .0r /reviver bbarik,', 'he basic material
of the insul �r so = a "per ite "b sanded by tit ripp ica ono e o o glassy, cellular
aggregates. 'f'ie finished board may be either single -ply or multiple -ply. Perlite thermal insulation
boards shall conform to the thermal resistance prescribed. The thermal resistance, compressive
strength, tensile strength, flame speed classification, and water absorption shall be tested to meet the
requirements prescribed.
This abstract is a brief summary of the referenced standard It Is Informational only and not an official part of the standard; theft!! text of the standard itself
must be referred to for Its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this
abstract are accurate, complete or up to date.
1. Scope
1.1 This specification covers the composition and physical properties for perlite thermal insulation
board used principally above structural roof decks and as a base for built -up, modified, and
elastomeric membrane roofing in building construction.
1.2 The use of thermal insulation materials covered by this specification may be regulated by
building codes or other agencies that address fire performance, or both. The fire performance of the
material should be addressed through standard fire test methods established by the appropriate
governing documents.
1.3 The values stated in inch -pound units are to be regarded as standard. The values given in
parentheses are mathematical conversions to SI units that are provided for information only and are
not considered standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its
use. It is the responsibility of the user of this standard to establish appropriate safety and health
practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately) 0
ASTM Standards
ERMIT CObRt) (AV*
PLAN REVIEW /ROUTIYVG SLIP
ACTIVITY NUMBER: D11 -369
PROJECT NAME: SIMMCO
DATE: 11/15/11
SITE ADDRESS: 10831 EAST MARGINAL WY S
X Original Plan Submittal
Response to Correction Letter #
Response to Incomplete Letter #
Revision # after Permit Issued
DEPARTMENT
BUltling- Division
Public Works
ire Prev ntion
Structural
Planning Division
Permit Coordinator
DETERMINATION OF COMPLETENESS: (Tues., Thurs.)
Complete
Incomplete
DUE DATE: 11/17/11
Not Applicable
Comments:
Permit Center Use Only
INCOMPLETE LETTER MAILED: LETTER OF COMPLETENESS MAILED:
Departments determined incomplete: Bldg ❑ Fire ❑ Ping ❑ PW ❑ Staff Initials:
TUES/THURS ROUTING:
Please Route
Structural Review Required
REVIEWER'S INITIALS:
No further Review Required
DATE:
APPROVALS OR CORRECTIONS:
Approved
Notation:
REVIEWER'S INITIALS:
Approved with Conditions
DUE DATE: 12/15/11
Not Approved (attach comments) n
DATE:
Permit Center Use Only
CORRECTION LETTER MAILED:
Departments issued corrections: Bldg ❑ Fire ❑ Ping ❑ PW ❑ Staff Initials:
Documents /routing slip.doc
2 -28 -02
Contractors or Tradespeopleter Friendly Page
1
General /Specialty Contractor
A business registered as a construction contractor with L &I to perform construction work within the scope of
its specialty. A General or Specialty construction Contractor must maintain a surety bond or assignment of
account and carry general liability insurance.
Business and Licensing Information
Name ASSOCIATED ROOFING INC UBI No. 600522587
Phone 2063644445 Status Active
Address P 0 Box 82894 License No. ASSOCRI16206
Suite /Apt. License Type Construction Contractor
City Kenmore
State WA
Zip 980280894
County King
Business Type Corporation
Parent Company
Effective Date 9/26/1984
Expiration Date 5/6/2012
Suspend Date
Specialty 1 General
Specialty 2 Unused
Other Associated Licenses
License
Name
Type
Specialty
1
Specialty 2
Effective
Date
Expiration
Date
Status
ASSOCRI164JD
ASSOCIATED
ROOFING INC
Construction
Contractor
Roofing
Gutters /Downspouts4
/4/1984
9/26/1984
Archived
ASSOCRC21906
ASSOCIATED
ROOFING
COMPANY
Construction
Contractor
Roofing
Unused
9/26/1979
9/26/1984
Archived
Business Owner Information
Name
Role
Effective Date
Expiration Date
KAESTNER, BRYAN JAY
Agent
03/29/2010
Bond Amount
KAESTNER, BRYAN JAY
President
10/27/2008
269250C
KAESTNER, PEARLLA JO
Secretary
10/27/2008
NEISINGER, WILLIAM P
Agent
01/01/1980
10/27/2008
NEISINGER, NANCY
Agent
01/01/1980
10/27/2008
SANDVIG, ROBERT N
$12,000.0003/21
01/01/1980
01/01/1980
SANDVIG, VERDA A
CCP588239
01/01/1980
01/01/1980
Bond Information
Page 1 of 2
Bond
Bond Company Name
Bond Account Number
Effective Date
Expiration Date
Cancel Date
Impaired Date
Bond Amount
Received Date
7
DEVELOPERS SURETY
8 INDEM CO
269250C
01/08/2010
Until Cancelled
$12,000.0001/19
/2010
6
DEVELOPERS SURETY
8 INDEMNITY
850161C
05/01/2002
Until Cancelled
02/28/2010
$12,000.0003/21
/2002
Assignment of Savings Information No records found for the previous 6 year period
Insurance Information
Insurance
Company Name
Policy Number
Effective Date
Expiration Date
Cancel Date
Impaired Date
Amount
Received Date
18
COMPANION
SPECIALTY INS CO
VGL1011152
02/20/2011
02/20/2012
$1,000,000.0002
/18/2011
17
SURETY
CO
CCP640664
CCP640664
02/20/2010
02/20/2011
$1,000,000.00
02/18/2010
16
SURETY
CO CO
CCP588239
02/20/2009
02/20/2010
$1,000,000.00
03/02/2009
15
CONTINENTAL
CASUALTY CO
2090161787
05/01/2006
02/20/2009
$10,000,000.00
04/28/2006
14
LEXINGTON I INS
41LX439765
05/01/2005
05/01/2006
$1,000,000.0005
/11/2005
https://fortress.wa.gov/lni/bbip/Print.aspx
11/29/2011