HomeMy WebLinkAboutPermit D11-376 - DR JITODAI - OPTICALDR PATRICIA JITODAI
16870 SOUTHCENTER PY
Dl 1 -376
City of/Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206 -031 -3670
Inspection Request Line: 206- 431 -2451
Web site: http: / /www.TukwilaWA.gov
DEVELOPMENT PERMIT
Parcel No.: 2623049129
Address: 16870 SOUTHCENTER PY TUKW
Suite No:
Project Name: DR PATRICIA JITODAI
Permit Number: D11 -376
Issue Date: 02/27/2012
Permit Expires On: 08/25/2012
Owner:
Name: PARKWAY SQUARE L L C
Address: PO BOX 5003 , BELLEVUE WA 98009
Contact Person:
Name: ALAN KEIMIG
Address: 216 A ST NW , AUBURN WA 98001
Contractor:
Name: NORTHWEST GREEN BUILDERS LLC
Address: 4509 INTERLAKE AV N, SUITE 224 , SEATTLE WA 98103
Contractor License No: NORTHGB882CP
Lender:
Name:
Address:
Phone: 253 - 939 -3232
Phone: 206 -550 -6062
Expiration Date: 02/17/2014
DESCRIPTION OF WORK:
NEW TENANT - NO CHANGES ARE BEING MADE TO THE EXTERIOR, NOR THE EXISTING TENANT DEMISING WALLS THE
SPACE TO BE BUILT IS A TYPICAL OPTOMETRIST /MEDICAL OFFICE SPACE TO INCLUDE SELLING AND DISPLAY OF
PRESCRIPTION GLASSES, TWO EXAM ROOMS, PRE -EXAM, OFFICE ROOMS, STAFF LOUNGE, OTHER EYE /MEDICAL
SUPPORT SPACES AND THE REFINISHING OF THE EXISTING UNISEX TOILET ROOM.
Value of Construction: $98,000.00 Fees Collected: $2,399.97
Type of Fire Protection: SPRINKL;ERS International Building Code Edition: 2009
Type of Construction: V -B Occupancy per IBC: 0008
Electrical Service Provided by: PUGET SOUND ENERGY
* *continued on next page **
doc: IBC -7/10
D11 -376 Printed: 02 -27 -2012
Public Works Activities:
Channelization / Striping: N
Curb Cut / Access / Sidewalk / CSS: N
Fire Loop Hydrant:
Flood Control Zone:
Hauling:
Land Altering:
Landscape Irrigation:
Moving Oversize Load:
N
N
Number: 0 Size (Inches): 0
Start Time:
Volumes: Cut 0 c.y.
End Time:
Fill 0 c.y.
Start Time: End Time:
Sanitary Side Sewer:
Sewer Main Extension: Private: Public:
Storm Drainage:
Street Use: Profit: N Non - Profit: N
Water Main Extension: Private: Public:
Water Meter: N
Permit Center Authorized Signature:
Date:
I hereby certify that I have read and examined this permit and know the same to be true and correct. All provisions of law and ordinances
governing this work will be complied with, whether specified herein or not.
The granting of this permit does not presume to give authority to violate or cancel the provisions of any other state or local laws regulating
construction or t - performance of work. I am authorized to sign and obtain this developmen permit and agree to the conditions attached
to this pe
Signature:
Print Name:
)2P S Date:?
Vrr■-f �-
This permit shall become null and void if the work is not commenced within 180 days from the date of issuance, or if the work is suspended
or abandoned for a period of 180 days from the last inspection.
PERMIT CONDITIONS:
1: ** *BUILDING DEPARTMENT CONDITIONS * **
2: No changes shall be made to the approved plans unless approved by the design professional in responsible charge and the
Building Official.
3: All mechanical work shall be inspected and approved under a separate permit issued by the City of Tukwila Permit Center
(206/431- 3670).
4: All permits, inspection records, and approved plans shall be at the job site and available to the inspectors prior to
start of any construction. These documents shall be maintained and made available until final inspection approval is
granted.
5: New suspended ceiling grid and light fixture installations shall meet the non - building structures seismic design
requirements of ASCE 7.
6: Partition walls that are tied to the ceiling and all partitions greater than 6 feet in height shall be laterally braced
to the building structure.
doc: IBC -7/10
D11 -376 Printed: 02 -27 -2012
7: All construction shall be done in conform with the approved plans and the requirem ' of the International
Building Code or International Residential International Mechanical Code, WashingtWate Energy Code.
8: There shall be no occupancy of a building until final inspection has been completed and approved by Tukwila building
inspector. No exception.
9: Remove all demolition rubble and loose miscellaneous material from lot or parcel of ground, properly cap the sanitary
sewer connections, and properly fill or otherwise protect all basements, cellars, septic tanks, wells, and other
excavations. Final inspection approval will be determined by the building inspector based on satisfactory completion of
this requirement.
10: Ventilation is required for all new rooms and spaces of new or existing buildings and shall be in conformance with the
International Building Code and the Washington State Ventilation and Indoor Air Quality Code.
11: Water heaters shall be anchored or strapped to resist horizontal displacement due to earthquake motion. Strapping shall
be at points within the upper one -third and lower one -third of the water heater's vertical dimension. A minimum
distance of 4- inches shall be maintained above the controls with the strapping.
12: All plumbing and gas piping work shall be inspected and approved under a separate permit issued by the City of Tukwila
Building Department (206- 431 - 3670).
13: All electrical work shall be inspected and approved under a separate permit issued by the City of Tukwila Building
Department (206- 431- 3670).
14: VALIDITY OF PERMIT: The issuance or granting of a permit shall not be construed to be a permit for, or an approval of,
any violation of any of the provisions of the building code or of any other ordinances of the City of Tukwila. Permits
presuming to give authority to violate or cancel the provisions of the code or other ordinances of the City of Tukwila
shall not be valid. The issuance of a permit based on construction documents and other data shall not prevent the
Building Official from requiring the correction of errors in the construction documents and other data.
15: ** *FIRE DEPARTMENT CONDITIONS * **
16: The attached set of building plans have been reviewed by the Fire Prevention Bureau and are acceptable with the
following concerns:
17: The total number of fire extinguishers required for a light hazard occupancy with Class A fire hazards is calculated at
one extinguisher for each 3,000 sq. ft. of area. The extinguisher(s) should be of the "all purpose" (2A, 10 B:C) dry
chemical type. The travel distance to any extinguisher must be 75' or less. (IFC 906.3) (NFPA 10, 3 -2.1)
18: Portable fire extinguishers, not housed in cabinets, shall be installed on the hangers or brackets supplied. Hangers or
brackets shall be securely anchored to the mounting surface in accordance with the manufacturer's installation
instructions. Portable fire extinguishers having a gross weight not exceeding 40 pounds (18 kg) shall be installed so
that its top is not more than 5 feet (1524 mm) above the floor. Hand -held portable fire extinguishers having a gross
weight exceeding 40 pounds (18 kg) shall be installed so that its top is not more than 3.5 feet (1067 mm) above the
floor. The clearance between the floor and the bottom of the installed hand -held extinguishers shall not be less than 4
inches (102 mm). (IFC 906.7 and IFC 906.9)
19: Fire extinguishers shall not be obstructed or obscured from view. In rooms or areas in which visual obstruction cannot
be completely avoided, means shall be provided to indicate the locations of the extinguishers. (IFC 906.6)
20: Extinguishers shall be located in conspicuous locations where they will be readily accessible and immediately available
for use. These locations shall be along normal paths of travel, unless the fire code official determines that the
hazard posed indicates the need for placement away from normal paths of travel. (IFC 906.5)
21: Fire extinguishers require monthly and yearly inspections. They must have a tag or label securely attached that
indicates the month and year that the inspection was performed and shall identify the company or person performing the
service. Every six years stored pressure extinguishers shall be emptied and subjected to the applicable recharge
procedures. If the required monthly and yearly inspections of the fire extinguisher(s) are not accomplished or the
inspection tag is not completed, a reputable fire extinguisher service company will be required to conduct these
required surveys. (NFPA 10, 4 -3, 4 -4)
22: Egress doors shall be readily openable from the egress side without the use of a key or special knowledge or effort.
(IFC 1008.1.8.3 subsection 2.2)
23: Dead bolts are not allowed on auxiliary exit doors unless the dead bolt is automatically retracted when the door handle
is engaged from inside the tenant space. (IFC Chapter 10)
24: Door handles, pulls, latches, locks and other operating devices on doors required to be accessible by Chapter 11 of the
International Building Code shall not require tight grasping, tight pinching or twisting of the wrist to operate. (IFC
1008.1.8.1)
doc: IBC -7/10
D11-376 Printed: 02 -27 -2012
25: Exit hardware and marking shall meet tequirements of the International Fire Code. • Chapter 10)
26: Aisles leading to required exits shall be provided from all portions of the building and the required width of the
aisles shall be unobstructed. (IFC 1013.4)
27: Maintain sprinkler coverage per N.F.P.A. 13. Addition/relocation of walls, closets or partitions may require relocating
and/or adding sprinkler heads. (IFC 901.4)
28: Sprinklers shall be installed under fixed obstructions over 4 feet (1.2 m) wide such as ducts, decks, open grate
flooring, cutting tables, shelves and overhead doors. (NFPA 13- 8.6.5.3.3)
29: All new sprinkler systems and all modifications to existing sprinkler systems shall have fire department review and
approval of drawings prior to installation or modification. New sprinkler systems and all modifications to sprinkler
systems involving more than 50 heads shall have the written approval of Factory Mutual or any fire protection engineer
licensed by the State of Washington and approved by the Fire Marshal prior to submittal to the Tukwila Fire Prevention
Bureau. No sprinkler work shall commence without approved drawings. (City Ordinance No. 2050).
30: An approved manual fire alarm system including audible /visual devices and manual pull stations is required for this
project. The fire alarm system shall meet the requirements of Americans With Disabilities' Act (I.B.C.), N.F.P.A. 72
and the City of Tukwila Ordinance #2051. (ALL FIRE ALARM COMPONENTS TO BE TIED TO THE BUILDING MAIN FIRE ALARM PANEL
AND WATERFLOW.)
31: Maintain fire alarm system audible /visual notification. Addition/relocation of walls or partitions may require
relocation and /or addition of audible /visual notification devices. (City Ordinance #2051)
32: Local U.L. central station supervision is required. (City Ordinance #2051)
33: All new fire alarm systems or modifications to existing systems shall have the written approval of The Tukwila Fire
Prevention Bureau. No work shall commence until a fire department permit has been obtained. (City Ordinance #2051) (IFC
104.2)
34: An electrical permit from the City of Tukwila Building Department Permit Center (206 - 431 -3670) is required for this
project.
35: All electrical work and equipment shall conform strictly to the standards of the National Electrical Code. (NFPA 70)
36: Contact The Tukwila Fire Prevention Bureau to witness all required inspections and tests. (City Ordinances #2050 and
#2051)
37: Any overlooked hazardous condition and/or violation of the adopted Fire or Building Codes does not imply approval of
such condition or violation.
38: These plans were reviewed by Inspector 511. If you have any questions, please call Tukwila Fire Prevention Bureau at
(206)575 -4407.
39: ** *PLANNING DEPARTMENT CONDITIONS * **
40: Signage shall be reviewed and approved through separate sign permit(s). Any proposed signage, including window signs,
shall conform to requirements of the Tukwila Sign and Visual Communication Code (TMC Title 19).
doc: IBC -7/10
D11 -376 Printed: 02 -27 -2012
•_
CITY OF TUKWILA
Community Development Department
Public Works Department
Permit Center
6300 Southcenter Blvd., Suite 100
Tukwila, WA 98188
http://www.TukwilaWA.gov
Building Permit No. tt1— (0
Project No.
Date Application Accepted: 111-s)— ( I
Date Application Expires:
(For office use only)
CONSTRUCTION PERMIT APPLICATION
Applications and plans must be complete in order to be accepted for plan review.
Applications will not be accepted through the mail or by fax.
* *Please Print **
SITE LOCATION
King Co Assessor's Tax No.: 2623049129
Site Address: 16870 Southcenter Parkway Suite Number:
Tenant Name: Dr. Patricia Jitodai New Tenant:
PROPERTY OWNER
Name: Parkway Square, LLC % ito,N PgLo QT
Address: To Box 5-003
City: ,k5tuEVVE State: wis, Zip: q$col
CONTACT PERSON — person receiving all project
communication
Name: The Keimig Associates A
Address: 216 A Street NW
City: Auburn State: WA Zip: 98001
Phone: (253) 939 -3232 Fax: (253) 735 -1309
Email: ACKeimig @msn.com
GENERAL CONTRACTOR INFORMATION
Company Name: Donovan Brothers Construction
Address: 1801 West Valley Highway North, Suite 101
City: Auburn State: WA Zip: 98001
Phone: (253) 939 -7777 Fax: (253) 939 -7994
Contr Reg No.: Exp Date:
Tukwila Business License No.:
H :Applications \Forms-Applications On Line\201 I Applications\Permit Application Revised - 8 -9 -I I_docx
Revised: August 2011
bh
Floor: 1
m Yes ..No
ARCHITECT OF RECORD
Company Name: The Keimig Associates
Architect Name: 216 A Street NW
Address:
City: Auburn State: WA Zip: 98001
Phone: (253) 939 -3232 Fax: (253) 735 -1309
Email: ACKeimig @msn.com
ENGINEER OF RECORD
Name:
Address:
Company Name:
Engineer Name:
Address:
City:
State:
Zip:
Phone:
Fax:
Email:
LENDER/BOND ISSUED (required for projects $5,000 or
greater per RCW 19.27.095)
Name:
Address:
City: State: Zip:
Page 1 of 4
•
BUILDING PERMIT INFORMATION — 206 - 431 -3670
Valuation of Project (contractor's bid price): $ cf Es 600
Existing Building Valuation: $ 3,261,800
Describe the scope of work (please provide detailed information):
No changes are being made to the building exterior, nor the existing tenant demising walls. The space to be built is a typical
optometrist retail /medical office space to include selling and display of prescription glasses, two exam rooms, pre -exam, office
rooms, staff lounge, other eye /medical support spaces, and the refinishing of the existing unisex toilet room.
Will there be new rack storage? ❑ Yes
m.. No If yes, a separate permit and plan submittal will be required.
Provide All Building Areas in Square Footage Below
PLANNING DIVISION:
Single family building footprint (area of the foundation of all structures, plus any decks over 18 inches and overhangs greater than 18 inches)
*For an Accessory dwelling, provide the following:
Lot Area (sq ft): Floor area of principal dwelling: Floor area of accessory dwelling:
*Provide documentation that shows that the principal owner lives in one of the dwellings as his or her primary residence.
Number of Parking Stalls Provided: Standard: Compact:
Handicap:
Will there be a change in use? ❑ Yes 0 No If "yes ", explain:
FIRE PROTECTION /HAZARDOUS MATERIALS:
® Sprinklers ❑ Automatic Fire Alarm
❑ None ❑ Other (specify)
Will there be storage or use of flammable, combustible or hazardous materials in the building? ❑ Yes No
If "yes', attach list of materials and storage locations on a separate 8 -1/2" x I I " paper including quantities and Material Sa ety ata Sheets.
SEPTIC SYSTEM
❑ On -site Septic System — For on -site septic system, provide 2 copies of a current septic design approved by King County Health
Department.
H: \Applications \Forms - Applications On Line\201 I Applications\Permit Application Revised - 8 -9 -1 I_docx
Revised: August 2011
bh
Page 2 of 4
Existing
Interior Remodel
Addition to
Existing
Structure
New
Type of
Construction per
IBC
Type of
Occupancy per
IBC
1st Floor
37,003
1,396
0
0
VB
M/B
2nd Floor
3rd Floor
Floors thru
Basement
Accessory Structure*
Attached Garage
Detached Garage
Attached Carport
Detached Carport
Covered Deck
Uncovered Deck
PLANNING DIVISION:
Single family building footprint (area of the foundation of all structures, plus any decks over 18 inches and overhangs greater than 18 inches)
*For an Accessory dwelling, provide the following:
Lot Area (sq ft): Floor area of principal dwelling: Floor area of accessory dwelling:
*Provide documentation that shows that the principal owner lives in one of the dwellings as his or her primary residence.
Number of Parking Stalls Provided: Standard: Compact:
Handicap:
Will there be a change in use? ❑ Yes 0 No If "yes ", explain:
FIRE PROTECTION /HAZARDOUS MATERIALS:
® Sprinklers ❑ Automatic Fire Alarm
❑ None ❑ Other (specify)
Will there be storage or use of flammable, combustible or hazardous materials in the building? ❑ Yes No
If "yes', attach list of materials and storage locations on a separate 8 -1/2" x I I " paper including quantities and Material Sa ety ata Sheets.
SEPTIC SYSTEM
❑ On -site Septic System — For on -site septic system, provide 2 copies of a current septic design approved by King County Health
Department.
H: \Applications \Forms - Applications On Line\201 I Applications\Permit Application Revised - 8 -9 -1 I_docx
Revised: August 2011
bh
Page 2 of 4
PUBLIC WORKS PERMIT INFORMATION — 206 - 433 -0179
Scope of Work (please provide detailed information):
Call before you Dig: 811
Please refer to Public Works Bulletin #1 for fees and estimate sheet.
Water District
❑ ...Tukwila ❑ ...Water District #125
❑ ...Water Availability Provided
Sewer District
❑ ...Tukwila
❑ ...Sewer Use Certificate
❑ .. Highline
❑...Valley View ❑ .. Renton
❑...Sewer Availability Provided
❑ .. Renton
❑ .. Seattle
Septic System:
❑ On -site Septic System — For on -site septic system, provide 2 copies of a current septic design approved by King County Health Department.
Submitted with Application (mark boxes which apply):
❑ ...Civil Plans (Maximum Paper Size — 22" x 34 ")
❑ ...Technical Information Report (Storm Drainage)
❑ ...Bond ❑ .. Insurance ❑ .. Easement(s)
Proposed Activities (mark boxes that apply):
❑ ...Right -of -way Use - Nonprofit for less than 72 hours
❑ ...Right -of -way Use - No Disturbance
❑ ...Construction/Excavation/Fill - Right -of -way ❑
Non Right -of -way ❑
❑ ...Total Cut
❑ ...Total Fill
cubic yards
cubic yards
❑ ...Sanitary Side Sewer
❑ ...Cap or Remove Utilities
❑ ...Frontage Improvements
❑ ...Traffic Control
❑ ...Backflow Prevention - Fire Protection
Irrigation
Domestic Water
❑ .. Geotechnical Report
❑ .. Maintenance Agreement(s)
❑...Traffic Impact Analysis
❑ ...Hold Harmless — (SAO)
❑ ...Hold Harmless — (ROW)
❑ .. Right -of -way Use - Profit for less than 72 hours
❑ .. Right -of -way Use — Potential Disturbance
❑ .. Work in Flood Zone
❑ .. Storm Drainage
❑ .. Abandon Septic Tank
❑ .. Curb Cut
❑ .. Pavement Cut
❑ .. Looped Fire Line
❑ .. Grease Interceptor
❑ .. Channelization
❑ .. Trench Excavation
❑ .. Utility Undergrounding
❑ ...Permanent Water Meter Size... WO #
❑ ...Temporary Water Meter Size .. WO #
❑ ... Water Only Meter Size WO # ❑ ... Deduct Water Meter Size
❑ ...Sewer Main Extension Public ❑ Private ❑
❑ ...Water Main Extension Public ❑ Private ❑
FINANCE INFORMATION
Fire Line Size at Property Line
❑ ...Water ❑ ...Sewer
Monthly Service Billing to:
Name:
Number of Public Fire Hydrant(s)
❑ ...Sewage Treatment
Day Telephone:
Mailing Address:
City State Zip
Water Meter Refund /Billing:
Name:
Mailing Address:
Day Telephone:
City
State
Zip
H:\Applications \Forms - Applications On Line \2011 Applications \Permit Application Revised - 8 -9 -1 I.docx
Revised: August 2011
bh
Page 3 of 4
PERMIT APPLICATION NOTES —
Value of Construction — In all cases, a value of construction amount should be entered by the applicant. This figure will be reviewed and is subject
to possible revision by the Permit Center to comply with current fee schedules.
Expiration of Plan Review — Applications for which no permit is issued within 180 days following the date of application shall expire by limitation.
The Building Official may grant one or more extensions of time for additional periods not exceeding 90 days each. The extension shall be
requested in writing and justifiable cause demonstrated. Section 105.3.2 International Building Code (current edition).
I HEREBY CERTIFY THAT I HAVE READ AND EXAMINED THIS APPLICATION AND KNOW THE SAME TO BE TRUE UNDER
PENALTY OF PERJURY B 't LAWS OF THE STATE OF WASHINGTON, AND 1 AM AUTHORIZED TO APPLY FOR THIS PERMIT.
BUILDING OWNER- R A
Signature:
Print Na
RIZED
Mailing Address:
Date: 11/212e9
t 1
Day Telephon - : 253 ' 3' " 3 23 2
2-/(Q n- ST /Z 7 - (,Ut p
H. \Applications \Forms- Applications On Lme\2011 Applications \Permit Application Revised - 8- 9- 11_docs
Revised: August 2011
bh
Page 4 of 4
•
City of Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206 - 431 -3670
Fax: 206 - 431 -3665
Web site: http: / /www.TukwilaWA.gov
RECEIPT
ParcelNo.: 2623049129 Permit Number: D11 -376
Address: 16870 SOUTHCENTER PY TUKW Status: APPROVED
Suite No: Applied Date: 11/23/2011
Applicant: DR PATRICIA JITODAI Issue Date:
Receipt No.: R12 -00724
Initials:
User ID:
TLS
1670
Payment Amount: $1,456.30
Payment Date: 02/21/2012 12:56 PM
Balance: $0.00
Payee: PATRICIA Y JITODAI
TRANSACTION LIST:
Type Method Descriptio Amount
Payment Credit Crd VISA
Authorization No. 02132C
ACCOUNT ITEM LIST:
Description
1,456.30
Account Code Current Pmts
BUILDING - NONRES 000.322.100
STATE BUILDING SURCHARGE 640.237.114
Total: $1,456.30
1,451.80
4.50
doc: Receiot -06 Printed: 02 -21 -2012
• •
City of Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206 - 431 -3670
Fax: 206-431-3665
Web site: http: / /www.TukwilaWA.aov
RECEIPT
Parcel No.: Permit Number: D11-376
Address: 16870 SOUTHCENTER PY TUKW Status: PENDING
Suite No: Applied Date: 11/23/2011
Applicant: DR PATRICIA JITODAI Issue Date:
Receipt No.: R11 -02557
Initials:
User ID:
WER
1655
Payment Amount: $943.67
Payment Date: 11/23/2011 10:55 AM
Balance: $1,456.30
Payee: THE KEIMIG ASSOCIATES
TRANSACTION LIST:
Type Method Descriptio Amount
Payment Check 9882 943.67
Authorization No.
ACCOUNT ITEM LIST:
Description
Account Code Current Pmts
PLAN CHECK - NONRES
000.345.830 943.67
Total: $943.67
doc: Receiot -06 Printed: 11 -23 -2011
INSPECTION RECORD
Retain a copy with permit
INSPE6TI0N NO. PERMIT NO.
CITY OF TUKWILA BUILDING DIVISION
6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431 -3670
Permit Inspection Request Line (206) 431 -2451
-b//37G
Project:
OR >34.7410z4 Z.J"i o 4
Type of Inspection:
r f, A, '1 L
Address:
/<_,87O s�r2A7-,e..-47
Date Called:
Special Instructions:
Date Wanted:.
a
Requester:
Phone No:
..206-309-Z22.25-
Approved per applicable codes. El Corrections required prior to approval.
COMMENTS:
- ' ( t QeN wtt 1e_. '(= tK.1/ti
Date:
1A_
REy SPECTION FEE R QUIRED. Prior to next inspection. fee must be
pad at 630060thcenter Blvd.. Suite 100. Call to schedule reinspection.
S INSPECTION RECORD
Retain a copy with permit
INSPECTION NO. PERMIT NO.
CITY OF TUKWILA BUILDING DIVISION
6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431 -3670
Permit Inspection Request Line (206) 431 -2451'
rX
--0K, ..�
Type -nspi cti isU
4 s C
�Ap
kddr ss:
Date Called:
(Y 1V1)(------
Specia Instructions:
I
Date Wanted ~7 �3 t I
�
am.
Requester:
Pho o e qV —O
/ \4 7
❑ Approved per applicable codes.
Corrections required prior to approval.
COMMENTS:
(Y 1V1)(------
1 1
i, HNI
(J k
' L(t
d(' 11
ii.s ,or'-10
33;k
p,J4
P
Inspe dt�or:
Date:—.7
ri REINSPECTION FEE REQUIRED. Prior to next inspection. fee must be
paid at 6300 Southcenter Blvd.. Suite 100. Call to schedule reinspection.
3
INSPECTION RECORD
Retain a copy with permit
INSPECTION NO. PERMIT NO.
CITY OF TUKWILA BUILDING DIVISION
6300 Southcenter Blvd., #100, Tukwila. WA 98188 a (206) 431 -3670
Permit Inspection Request Line (206) 431 -2451
Project:
AR , 7J? Q' #9 c,T/?z IA
Type of Inspection:
, /- /.v 91
Address:
i/68740 Staavr ,)y
Date Called:
Special Instructions:
• •
Date Wanted:.
7• / 3 -/ Z
a.m.
Requester:
Phone No:
x(36 -89v -45
767
.
Approved per applicable codes.
LJCorrections required prior to approval.
COMMENTS:
(AN('fLe-,4)
Date: -
/3
PECTION FEE REQ RED. Prior o next inspection, feeust -tre
id at 6300 Southcenter B d.. Suit 100. Call to schedule reinspection.
INSPECTION RECORD
Retain a copy with permit -
INSPECTION NO. PERMIT NO.
CITY OF TUKWILA BUILDING DIVISION
6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431 -3670
Permit Inspection Request Line (206) 431 -2451
�.J
LV/ -37
Project:
Type of Inspection: .
b P47)? /sl $1rf 70
v •.57/,5, ,t/opC'ix./Nle
Address:
26 g76 .5-C) C1,4/i" >oy
Date Called:
62�'z //+/U
Special Instructions:
2.,00c
/20'66
I
Date Wanted:. a.m.
(; /a? o / /Z'
Requester:
Phone No:
.9a6 '5,6s -- f 76
Approved per 'applicable codes. DCorrections required prior to approval. CC
COMMENTS:
(I) t:- z,.,,;,/b - 40,0A406
6Lizitt. fr of
nspe
ip
4 . ...5. nA C/" /2P
1 SPECTION FEE RE UIRED. Pfior to next inspection, fee must be
id at 6300 Southcenter lvd., S(lite 100. Call to schedule reinspection.
4ri
•
INSPECTION RECORD
Retain a copy with permit
INSPECTION NO. . PERMIT NO.
CITY OF' TUKWILA BUILDING DIVISION
6300 Southcenter 8Ivd., #100, Tukwila. WA 98188 I (206) 431-3670
Permit Inspection Request Line (206) 431-2451
3.7b
Project: '
4 R. .. • Arri21-eiil tin-o 4
Type of Inspection:
(7
p. i:,-;,,./vfier.,-/fir ab, ws - ,---;,./:,„;Ay 45.00,,,AA.---e/
Address: -
/ 6A7 6. ,se"eArr v)(71
Called:
Special Instructions: '.
. ' $ • '
Date Wanted:.
p.m.
Requester:
. .
•
Phone No:
„w4-Aqc2- V 7€ 9
Approved per applicable codes.
IECorrections required prior to approval.
COMMENTS
p. i:,-;,,./vfier.,-/fir ab, ws - ,---;,./:,„;Ay 45.00,,,AA.---e/
.
....
. i'44140,- e-hil& __.2-445-2,/,17,6-,, ...,./
.)
4) 19 //c' /- A),,,,,,ve ?7 Ao e
__
ai4 0 g e (ti/r;1 (-/r-s- /4 ir;,-,- ,?,-/../.../..=1,7'
;4'7• i
. .
•
. •
. .
•
, .
....
Inspect
Date:
3-2 0- /
REINS ECTION FEE REQU ED. Prior, o next inspection. fee must be
aid t 6300 Southcenter Ell d.. Suite 100. Call to schedule reinspection.
INSPECTION RECORD
Retain a copy with permit
.INSPECTION NO. PERMIT NO.
CITY.OF TUKWILA BUILDING DIVISION
6300 Southcenter Blvd., #100, Tukwila. WA 98188 1E, (206) 431-3670
Permit Inspection Request Line (206) 431-2451
Project: 10-4,.., p
no,,
TyPe_Nnspection:
i■kt AC.
Adi d risscsiri: • . 'sc tur,414yDate
Called:
Spetlal Instructiont: I
• •
. .
. . •
. .
.
Date Wanted q„._11 ,
r C.--...
<ia...111...
p.m.
Requester:
Phone No:, ,„"::
iOje E50 -,:n
• b Approved per applicable codes.
rrections required prior to approval.
COMMENTS:
)4k4A,
,rn
lo .X.p/tr-Ls-A
WP
7r-f acL
Id
REINSPECTION FEE REQUIRED. Prior to next inspection. fee must be
paid at 6300 Southcenter Blvd.. Suite 100. Call to schedule reinspection.
0
INSPECTIONNUMBER
INSPECTION RECORD
Retain a copy with permit
ia- s- 061
o69L
D/ /- 3�(0
PERMIT NUMBERS
CITY OF TUKWILA FIRE DEPARTMENT
444 Andover Park East, Tukwila, Wa. 98188 206- 575 -4407
•
•
Project:
F Q . pm-,,,,- A -Z--/ +Oda -c
Type o Inspe ion:
1q- • sP lt. �, N 0.1-
Address: M, 7 D S • C . 'ic
Suite #:
Cont ct Pg on:
01 f tW
Special Instructions: s
:
Phone•No.:
aS - S1 -3a-3).
j•Approved per applicable codes.
Corrections required prior to approval.
COMMENTS:
Sprinklers:
Fire Alarm:
Hood & Duct:
Monitor:
Pre -Fire:
Permits:
Occupancy Type:
0 •tv.Z. - 6r---
Corr -e e-11 u r�
/Vv-t-
c..,._.4-
c, /■_
.011
'fox ,
Needs Shift Inspection:
Sprinklers:
Fire Alarm:
Hood & Duct:
Monitor:
Pre -Fire:
Permits:
Occupancy Type:
Inspector: A ,s—a--
Date: 7//V/ 'L„
Hrs.:
$100.00 REINSPECTION FEE REQUIRED. You will receive an invoice from
the City of Tukwila Finance Department. Call to schedule a reinspection.
Billing Address
Attn:
Company Name:
Address:
City:
State:
Word /Inspection Record Form.Doc
6/11/10
T.F.D. Form F.P. 113
i
INSPECTION NUMBER
INSPECTION RECORD
Retain a copy with permit
D/l _ 3 7,4
a6/
PERMIT NUMBERS
CITY OF TUKWILA FIRE DEPARTMENT
444 Andover Park East, Tukwila, Wa. 98188
206 - 575 -4407
Project: D g..•�
i G ` A �todACType
of Iy�spectio
S, � 0 v er-
Address: 74,e-70 S. c__ f
Suite #:
Contact'Person:
Special Instructions:
Phone :No.:
Approved per applicable codes.
Corrections required prior to approval.
COMMENTS:
Needs Shift Inspection:
Sprinklers:
Fire Alarm:
Hood & Duct:
Monitor:
Pre -Fire:
Permits:
Occupancy Type:
Inspector:
"2„,\
-c,L 5 3-
Date: VA ; /42
Hrs.:
1
$100.00 REINSPECTION FEE REQUIRED. You will receive an invoice from
the City of Tukwila Finance Department. Call to schedule a reinspection.
Billing Address
Attn:
Company Name:
Address:
City:
State:
Zip:
Word /Inspection Record Form.Doc
6/11/10
T.F.D. Form F.P. 113
ti
_.-
•
2009 Washington State Energy Code Compliance Form for Nonresidential and Multifamily Residential
Interior Lighting Summary
LTG -INT
2009 Washington State Energy Code Compliance Forms for Nonresidential and Multifamily Residential
Revised December 2010
Project Info
-
Project Address DR. PATRICIA JITODAI
Date 12/14/2011
16870 Southcenter Parkway
For Building Department Use
FILE COPY
Mon%
Tukwila, WA 98188
Applicant Name: THE EED11G ASSOCIATES
Applicant Address: 216 A STREET Nor, AUBURN, WA 98001
Applicant Phone:
253- 939 -3232 0,..ww++,A4
Project Description
❑ New Building ❑ Addition J Alteration
J Plans Induded
Indicate controls (Sections 1513) including commissioning requirements on plans.
Compliance Option
0 Prescriptive 0 Lighting Power Allowance 0 Systems Analysis
(See Qualification Checklist (over). Indicate Prescriptive & LPA spaces dearly on plans.)
Alteration Exceptions
(check appropriate box - sec. 1132.3)
❑ No changes are being made to the lighting and space use not changed
❑ Less than 60% of the fixtures new, installed wattage not increased, & space use not changed.
Maximum Allowed Lighting Wattage
Location
(floor plan/room #)
Occupancy Description
Allowed
Watts per ft2'"
Gross Interior
Area in ft2
Allowed x Area
ii2x2
Office
0.91
825
750
"p° 1
Retail
1.33
518
689
Laboratory
1.62
53
86
**From Table 15-1 (over) - document all exceptions on form LTG-LPA Total Allowed Watts
1525
Proposed Lighting Wattage
Location
(floor plan/room #)
Fixture Description
Number of
Fixtures
Watts/
Fixture
Watts
Proposed
ii2x2
Fluorescent Fixture (2) T -8 32Watts Columbia STR24-
15
64
960
"p° 1
Pendant fixtures
7
32
224
Niles Wall Sconce F1065 -16
12
32
384
ENMinks
Lavery wall Sconce (EXEMPT 1512.2 #1)
13
13
169
Compact Fluorescent Can Downlight
6
32
192
I MR16 Display Lighting (EXEMPT 1512.2 #10)
20
6
120
Track lighting 5 headpEMOR16
3
30
90
Total Proposed Watts may not exceed Total Allowed Watts for Interior Total Proposed Watts
2139
Notes: Interior Lighting Power Allowance DOES NOT COMPLY
1. For proposed Fixture Description, indicate fixture type, lamp type (e.g. T-8), number of lamps in the fixture, and ballast type (if
included). For track lighting, list the length of the track (in feet) in addition to the fixture, lamp, and ballast information.
2. For proposed Watts/Fixture, use manufacturer's listed maximum input wattage of the fixture (not simply the lamp wattage) and
other criteria as specified in Section 1530. For line voltage track lighting, list the greater of actual luminaire wattage or length of track
multiplied by 50, or as applicable, the wattage of current limiting devices or of the transformer. For low voltage track lighting list the
transformer•rated•vatt . ge.
REVIe 4 t RFor xempt lighting, note section and exception number, and leave Watts/Fixture blank.
CODE COMPLIANCE
i APPROVED
DEC 1 6 2011
City of Tukwila
BUILDING DIVISION
E
er RrIn I EIV D
LA
DEC 15 2011
PERMIT CENTER
CORRECT t Ih
pll -�'l1v
ti
2009 Washington State Energy Code Compliance Form for Nonresidential and Multifamily Residential
Interior Lighting Summary (back)
LTG -INT
2009 Washington State Energy Code Compliance Forms for Nonresidential and Multifamily Residential
Revised December 2010
Prescriptive Spaces
Occupancy
0 Warehouse or Parking Garage 0 Other
Qualification Checkli
Note: If occupancy type is "Other" an
Lighting
Fixtures:
(Section
1 521)
, . 95% �i Check if 95 or more of fixtures comply with 1,2 or 3 and rest are ballasted.
;
1tFluorescent fixtures with a) 1 or 2 two lamps, b) reflector or louvers,
1:
c) 5-60 watt T -1, T -2, T-4, T -5, T-8, or CFL lamps, and d) hard -wired electronic
dimming ballasts. Screw -in CFL fixtures and tracking lighting do not qualify.
2. Metal Halide with a) reflector b) ceramic MH lamps < =150w c) electronic ballasts
MusgiiMs.
�tanswe checked, the number of fii3glrP‘rn
h e space is not limited • Code. Cleary
r e r i -,° ,� in s on p .ns. If not
qualified, d, `A " :!cur'
a6ee)
TABLE 15 -1 Unit Liahtins>I Power Allowance (LPA
Use'
LPA` (WIW)
Use'
LPA` (W/ft`)
Automotive facility
0.85
Office buildings, office/administrative areas in facilities
of other use types (including but not limited to schools,
hospitals, institutions, museums, banks, churches)5
0.91
Convention center
1.10
Parking garages
0.20
Courthouse
1.10
Penitentiary and other Group 1 -3 Occupancies
0.90
Cafeterias, fast food establishment ?,
restaurants/bars5
1.20
Police and fire stations
0.90
Dormitory
0.85
Post office
1.00
Dweling Units
1.00
Retail1O, retail banking, mall concourses, wholesale
stores (pallet rack shelving)
1.33
Exercise center
0.95
School buildings (Group E Occupancy only), school
classrooms, day care centers
1.00
Gymnasia, assembly spaces
0.95
Theater, motion picture
0.97
Health care clinic
1.00
Theater, performing arts
1.25
Hospital, nursing homes, and other Group 1 -1 and
1 -2 Occupancies
1.20
Transportation
0.80
HoteUmotel
1.00
Warehouses
0.50
Laboratory spaces (all spaces not classified
"laboratory" shall meet office and other appropriate
categories)
1.62
Workshops
1.20
Laundries
1.20
Libraries°
1.20
Plans Submitted for Common Areas Only'
Manufacturing facility
1.20
Main floor building lobbies (except mall concourses)
1.10
Museum
1.00
Common areas, corridors, toilet facilities and
washrooms, elevator lobbies
0.80
Footnotes for Table 15 -1
1) In cases in which a general use and a specific use are listed, the specific use shall apply. In cases in which a use is not mentioned
specifically, the Unit Power Allowance shall be determined by the building official. This determination shall be based upon the most
comparable use specified in the table. See Section 1512 for exempt areas.
2) The watts per square foot may be increased, by 2% per foot of ceiling height above 20 feet, unless specifically directed otherwise by
subsequent footnotes.
3) Watts per square foot of room may be increased by 2% per foot of ceiling height above 12 feet.
4) For all other spaces, such as seating and common areas, use the Unit Light Power Allowance for assembly.
5) Watts per square foot of room may be increased by 2% per foot of ceiling height above 9 feet.
6) Reserved.
7) For conference rooms and offices less than 150ft2 with full height partitions, a Unit Lighting Power Allowance of 1.1 w/ft2 may be used.
8) Reserved.
9) For indoor sport toumament courts with adjacent spectator seating over 5,000, the Unit Lighting Power Allowance for the court area is
2.60 W/ft2.
10) Display window illumination installed within 2 feet of the window, provided that the display window is separated from the retail space by
walls or at least three-quarter- height partitions (transparent or opaque) and lighting for free- standing display where the lighting moves
with the display are exempt.
An additional lighting power allowance is allowed for merchandise display luminaires installed in retail sales areas that are specifically
designed and directed to highlight merchandise. The following additional wattages apply:
i. 0.6 watts per square foot of sales floor area not listed in items ii and iii below;
ii. 1.4 watts per square foot of fumiture, clothing, cosmetics or artwork floor area; or
iii. 2.5 watts per square foot of jewelry, crystal or china floor area.
The specified floor area for items i, ii, or iii above, and the adjoining circulation paths shall be identified and specified on building plans.
Calculate the additional power allowance by multiplying the above LPDs by the sales floor area for each department excluding major
circulation paths. The total additional lighting power allowance is the sum of allowances for sales categories I, ii, or iii plus an additional
1,000 watts for each separate tenant larger than 250 square feet in area.
The additional wattage is allowed only if the merchandise display luminaires comply with all of the following:
(a) Located on ceiling- mounted track or directly on or recessed into the ceiling itself (not on the wall).
(b) Adjustable in both the horizontal and vertical axes (vertical axis only is acceptable for fluorescent and other fixtures with two
points of track attachment).
This additional lighting power is allowed only if the lighting is actually installed and automatically controlled, separately from the general
lighting, to be tumed off during nonbusiness hours. This additional power shall be used only for the specified luminaires and shall not be
used for any other purpose.
This additional lighting power is allowed only if the lighting is actually installed.
11) Provided that a floor plan, indicating rack location and height, is submitted, the square footage for a warehouse may be defined, for
computing the interior Unit Lighting Power Allowance, as the floor area not covered by racks plus the vertical face area (access side only)
of the racks. The height allowance defined in footnote 2 applies only to the floor area not covered by racks.
2009 Washington State Energy Code Compliance Forms for Nonresidential and Multifamily
Envelope Summary Zone 1 Non - Residential
ENV -SUM
2009 Washington State Energy Code Compliance Forms for Nonresidential and Multifamily Residential
Revised February 2011
Project Info
Project Address DR. PATRICIA JITODAI
Date 11/16/2011
16870 Southcenter Parkway
For Building Department Use
FILE COPY
Tukwila, WA 98188
Applicant Name: THE EEDaG ASSOCIATES
Applicant Address: 216 A Street NW, Auburn, WA 98001 -
Applicant Phone: 253- 939 -3232
Project Description
I❑ New Building ❑ Addition
Alteration ❑ Change of Use
Compliance Option
❑ Prescriptive ❑ Component Performance
(See Decision Flowchart (over) for qualifications)
❑ Seattle EnvStd
❑ Systems Analysis
Occupancy Group
® Nonresidential 0 Multifamily Residential
Climate Zone
0 Climate Zone 1 0 Climate Zone 2 ( See WSEC 302.3 for county list)
Fenestration Area
Calculation
These fenestration and wall values am
calculated per inputs provided in the
ENV -UA form. In the electronic form
these cells auto-fill and cannot be edited.
Total Fenestration
(rough opening) Gross Exterior
(vertical & overhd) divided by Wall Area times 100 equals % Fenestration
— X 100 =
Semi- Heated Path
Allowable if project meets all requirements as defined in section 1310.2. Only allowed as
yes prescriptive path and must be calculated separately from otiler conditioned spaces. Limited to
0 no reduced wall insulation levels. Requires other fuel heating and qualifying thermostat.
Envelope Requirements (enter values as applicable)
Minimum Insulation R- values
Roofs - Insulation Above Deck
Vertical Fenestration
Roofs - Metal Building
Non -Metal Frame
Roofs - Single Rafter
Roofs - Attic and All Others
Walls - Mass
Entrance Door
Walls - Metal Building
Walls - Steel Framed
Walls - Wood Framed and Other
Skylights - With Curb
Floors - Mass
Floors - Steel Joist
Floors - Wood Framed and Other
Opaque Doors - Non-Swinging
Maximum F- factors
Slabs -on -Grade - Unheated
Slabs -on -Grade - Heated
Vertical Fenestration
Notes:
REVIE
CODE COMPLIANCE
APPROVED
DEC 16 2011
City of Tukwila
BUILDING DIVISION
Envelope Requirements ( continued )
Maximum U- factors
Vertical Fenestration
Non -Metal Frame
Metal Frame
Entrance Door
Skylights - Without Curb
Skylights - With Curb
Opaque Doors - Swinging
Opaque Doors - Non-Swinging
Maximum SHGC (or SC)
Vertical Fenestration
Non -North
North
Skylights
t s 44- R���, /`�AOC-'7 o TAE 12-.0(_,0l,.1 E-.) / i oPE
bl1371
RECEIVED
NOV 23 2011
p
2009 Washington State Energy Code Compliance Form for Nonresidential and Multifamily Residential
Interior Lighting Summary
LTG -INT
2009 Washington State Energy Code Compliance Forms for Nonresidential and Multifamily Residential
Revised December 2010
Project Info
Project Address DR. PATRICIA JITODAI
Date 11/16/2011
16870 southcenter Parkway
For Building Department Use
Tukwila, WA 98188
Applicant Name: THE RBD G Assoc/ATES
Applicant Address: 216 A STREET NW, AUBURN, MA 98001
Applicant Phone:
253 - 939 -3232
Project Description
❑ New Building ❑ Addition ✓ Alteration
✓ Plans Included
Indicate controls (Sections 1513) including commissioning requirements on plans.
Compliance Option
OO Prescriptive 0 Lighting Power Allowance 0 Systems Analysis
(See Qualification Checklist (over). Indicate Prescriptive & LPA spaces dearly on plans.)
Alteration Exceptions
(check appropriate box - sec. 1132.3)
❑ No changes are being made to the lighting and space use not changed
❑ Less than 60% of the fixtures new, installed wattage not increased, & space use not changed.
Maximum Allowed Lighting Wattage
Location
(floor plan /room #)
Occupancy Description
Allowed
Watts per ft2 '"
Gross Intenor
Area in ft2
Allowed x Area
'" From Table 15-1 (over) - document all exceptions on form LTG -LPA Total Allowed Watts
Proposed Lighting Wattage
Location
(floor plan/room #)
Fixture Description
Number of
Fixtures
Watts/
Fixture
Watts
Proposed
Total Proposed Watts may not exceed Total Allowed Watts for Interior Total Proposed Watts
Notes:
1. For proposed Fixture Description, indicate fixture type, lamp type (e.g. T-8), number of lamps in the fixture, and ballast type (if
included). For track lighting, list the length of the track (in feet) in addition to the fixture, lamp, and ballast information.
2. For proposed Watts/Fixture, use manufacturer's listed maximum input wattage of the fixture (not simply the lamp wattage) and
other criteria as specified in Section 1530. For line voltage track lighting, list the greater of actual luminaire wattage or length of track
multiplied by 50, or as applicable, the wattage of current limiting devices or of the transformer. For low voltage track lighting list the
transformer rated wattage.
3. List all fixtures. For exempt lighting, note section and exception number, and leave Watts/Fixture blank.
DID- 37(0
RECEIVED
NOV 23 2011
Pit;•: rh'IT CENTER
2009 Washington State Energy Code Compliance Form for Nonresidential and Multifamily Residential
Interior Lighting Summary (back)
LTG -INT
2009 Washington State Energy Code Compliance Forms for Nonresidential and Multifamily Residential
Revised December 2010
Prescriptive Spaces
Occupancy:
0 Warehouse or Parking Garage 0 Other
Qualification Checklist
Note: If occupancy type is "Other" and fixture
answer is checked, the number of fixtures in
the space is not limited by Code. Clearly
indicate these spaces on plans. If not
qualified, do LPA Calculations.
Lighting
Fixtures:
(Section
1521)
0.85
,, Check if 95% or more of fixtures comply with 1,2 or 3 and rest are ballasted.
1. Fluorescent fixtures with a) 1 or 2 two lamps, b) reflector or louvers,
c) 5-60 watt T -1, T -2, T-4, T -5, T-8, or CFL lamps, and d) hard -wired electronic
dimming ballasts. Screw -in CFL fixtures and tracking lighting do not qualify.
2. Metal Halide with a) reflector b) ceramic MH lamps < =150w c) electronic ballasts
3. LED lights.
TABLE 15 -1 Unit Litahtinta Power Allowance (LPA
Use'
LPA` (W/ft`)
Use'
LPA` (W1ft`)
Automotive facility
0.85
Office buildings, office/administrative areas in facilities
of other use types (including but not limited to schools,
hospitals, institutions, museums, banks, churches)5
0.91
Convention center
1.10
Parking garages
0.20
Courthouse
1.10
Penitentiary and other Group 1-3 Occupancies
0.90
Cafeterias, fast food establishments',
restaurants/bars'
1.20
Police and fire stations
0.90
Dormitory
0.85
Post office
1.00
Dweling Units
1.00
Retail1O, retail banking, mall concourses, wholesale
stores (pallet rack shelving)
1.33
Exercise center
0.95
School buildings (Group E Occupancy only), school
classrooms, day care centers
1.00
Gymnasia, assembly spaces
0.95
Theater, motion picture
0.97
Health care clinic
1.00
Theater, performing arts
1.25
Hospital, nursing homes, and other Group 1 -1 and
1 -2 Occupancies
1.20
Transportation
0.80
Hotel/motel
1.00
Warehouses
0.50
Laboratory spaces (all spaces not dassified
"laboratory" shall meet office and other appropriate
categories)
1.62
Workshops
1.20
Laundries
1.20
Libraries'
1.20
Plans Submitted for Common Areas Only'
Manufacturing facility
1.20
Main floor building lobbies' (except mall concourses)
1.10
Museum
1.00
Common areas, corridors, toilet facilities and
washrooms, elevator lobbies
0.80
ootnotes for Table 15-1
1) In cases in which a general use and a specific use are listed, the specific use shall apply. In cases in which a use is not mentioned
specifically, the Unit Power Allowance shall be determined by the building official. This determination shall be based upon the most
comparable use specified in the table. See Section 1512 for exempt areas.
2) The watts per square foot may be increased, by 2% per foot of ceiling height above 20 feet, unless specifically directed otherwise by
subsequent footnotes.
3) Watts per square foot of room may be increased by 2% per foot of ceiling height above 12 feet.
4) For all other spaces, such as seating and common areas, use the Unit Light Power Allowance for assembly.
5) Watts per square foot of room may be increased by 2% per foot of ceiling height above 9 feet.
6) Reserved.
7) For conference rooms and offices Tess than 150ft2 with full height partitions, a Unit Lighting Power Allowance of 1.1 w/ft2 may be used.
8) Reserved.
9) For indoor sport toumament courts with adjacent spectator seating over 5,000, the Unit Lighting Power Allowance for the court area is
2.60 W/ft2.
10) Display window illumination installed within 2 feet of the window, provided that the display window is separated from the retail space by
walls or at least three- quarter- height partitions (transparent or opaque) and lighting for free- standing display where the lighting moves
with the display are exempt
An additional lighting power allowance is allowed for merchandise display luminaires installed in retail sales areas that are specifically
designed and directed to highlight merchandise. The following additional wattages apply:
i. 0.6 watts per square foot of sales floor area not listed in items ii and iii below;
ii. 1.4 watts per square foot of furniture, clothing, cosmetics or artwork floor area; or
iii. 2.5 watts per square foot of jewelry, crystal or china floor area.
The specified floor area for items i, ii, or iii above, and the adjoining circulation paths shall be identified and specified on building plans.
Calculate the additional power allowance by multiplying the above LPDs by the sales floor area for each department excluding major
circulation paths. The total additional lighting power allowance is the sum of allowances for sales categories 1, ii, or iii plus an additional
1,000 watts for each separate tenant larger than 250 square feet in area.
The additional wattage is allowed only if the merchandise display luminaires comply with all of the following:
(a) Located on ceiling - mounted track or directly on or recessed into the ceiling itself (not on the wall).
(b) Adjustable in both the horizontal and vertical axes (vertical axis only is acceptable for fluorescent and other fixtures with two
points of track attachment).
This additional lighting power is allowed only if the lighting is actually installed and automatically controlled, separately from the general
lighting, to be tumed off during nonbusiness hours. This additional power shall be used only for the specified luminaires and shall not be
used for any other purpose.
This additional lighting power is allowed only if the lighting is actually installed.
11) Provided that a floor plan, indicating rack location and height, is submitted, the square footage for a warehouse may be defined, for
computing the interior Unit Lighting Power Allowance, as the floor area not covered by racks plus the vertical face area (access side only)
of the racks. The height allowance defined in footnote 2 applies only to the floor area not covered by racks.
2009 Washington State Energy Code ComDliance Form for Nonresidential and Multifamily Residential
Lighting,
2009 Washington
Motor, and Transformer Permit Plans Checklist LTG -CHK
State Energy Code Compliance Forms for Nonresidential and Multifamily Residential Revised December 2010
Project Address DR. PATRICIA ,7IT'ODAI
IDate 11/16/2011
The following information is necessary to check a permit application for compliance with the lighting, motor, and transformer requirements
in the 2009 Washington State Nonresidential Energy Code.
Applicability
(yes, no, n.a.)
I Code
Section
Component
'Information Required
Location
on Plans
I Building Department
Notes
LIGHTING CONTROLS (Section 1513)
Yes
1513.1
Local control/access
Schedule with type, indicate locations
A -4
Yes
1513.2
Area controls
Maximum limit per switch
A -4
Yes
1513.3
Daylight zone control
Schedule with type and features, indicate locations
A -4
Yes
vertical glazing
Indicate vertical glazing on plans
A -4
N.A.
overhead glazing
Indicate overhead glazing on plans
Yes
1513.4
Display /exhib /special
Indicate separate controls
A -4
N.A.
1513.5
Exterior shut -off
Schedule with type and features, indicate location
N.A.
(a) timer w/backup
Indicate location
N.A.
(b) photocell.
Indicate location
Yes
1513.6
Inter. auto shut -off
Indicate location
Yes
1513.6.1
(a) occup. sensors
Schedule with type and locations
A -4
N.A.
1513.6.2
(b) auto. switches
Schedule with type and features (back -up, override capability);
Indicate size of zone on plans
N.A.
1513.7
Hotel/motel controls
Indicate location of room master controls
Yes
1513.8
Commissioning
Indicate requirements for lighting controls commissioning
A -4
EXIT SIGNS (Section 1514)
Yes I
1514 IMax.
watts 'Indicate
watts for each exit sign IA
-4 I
LIGHTING POWER ALLOWANCE (Section 1530 -1532)
Yes
1531
Interior Lighting
Summary Form
Completed and attached. Schedule with fixture types,
lamps, ballasts, watts per fixture
N.A.
1532
Exterior Lighting
Summary Form
Completed and attached. Schedule with fixture types,
lamps, ballasts, watts per fixture
MOTORS (Section 1511)
N.A. I
1511 lElec
motor efficiency IMECH
-MOT or Equipment Schedule with hp, rpm, efficiency I
I
TRANSFORMERS (Section 1540)
N.A. I
1540 (Transformers
(indicate
size and efficiency
1
I
If "no" is circled for any question, provide explanation:
9
THE KEIMIeASSOCIATES
ARCHITECTS - PLANNERS
216 A STREET NW, AUBURN, WA 98001
(253) 939 -3232, FAX (253) 735 -1309
December 8, 2011
Allen Johannessen
Plans Examiner
City of Tukwila, Building Division
RE: Dr. Patricia Jitodai (D11 -376)
Mr. Johannessen,
The following is our written response to the plan review comments letter for Dr. Patricia Jitodai dated December 1,
2011. To expedite your review of the correction, the following numbers correspond to the items noted in your
letter.
1. Two copies of the WSEC Lighting summary is provided for the existing lighting, using the lighting power
allowance formula. Also, two copies of the WSEC Lighting summary for the proposed lighting is attached
using the Prescriptive compliance option.
2. The ADA bathroom has been changed to meet the ICC /ANSI A117.1 -2003 along with the installation of
new toilet accessories. Scald guard covers will be added underneath the sink, and also a vertical grab bar
will be added.
3. The existing fan in the bathroom ventilating to the building exterior is now indicated.
4. Detail 6/A -3 is now indicated along the east wall on the reflected ceiling plan on Sheet A-4.
5. The minimum access and accessible access around the mercantile area is no delineated on sheet A -2.
6. A note has been added to the reflected ceiling plan to address the mechanical ventilation on sheet A-4.
If there are any further comments or questions, feel free to contact me at 253- 939 -3232.
Sincerely,
A.77
Neil P. Pugenio
Project Manager
•
Gity of Tukwila
•
Jim Haggerton, Mayor
Department of Community Development Jack Pace, Director
December 6, 2011
Alan Keimig
The Keimig Associates
216 A St NW
Auburn, WA 98001
RE: Correction Letter #1
Development Permit Application Number D11 -376
Dr Patricia Jitodai —16870 Southcenter Py
Dear Mr. Keimig,
This letter is to inform you of corrections that must be addressed before your development permit can be
approved. All correction requests from each department must be addressed at the same time and
reflected on your drawings. I have enclosed comments from the Building Department. At this time the
Fire Department has no comments.
Building Department: Allen Johannessen at 206 433 -7163 if you have questions
regarding the attached comments.
Please address the attached comments in an itemized format with applicable revised plans,
specifications, and /or other documentation. The City requires that two (2) sets of revised plans,
specifications and /or other documentation be resubmitted with the appropriate revision block.
In order to better expedite your resubmittal, a `Revision Submittal Sheet' must accompany every
resubmittal. I have enclosed one for your convenience. Corrections /revisions must be made in person
and will not be accepted through the mail or by a messenger service.
If you have any questions, please contact me at (206) 431 -3670.
Sincerely,
Bill Rambo
Permit Technician
encl
File No. D11 -376
W:\Permit Center \Correction Letters\2011\D11 -376 Correction Letter #1.doc
6300 Southcenter Boulevard, Suite #100 • Tukwila, Washington 98188 • Phone: 206 - 431 -3670 • Fax: 206 - 431 -3665
•
Building Division Review Memo
Date: December 1, 2011
Project Name: Dr. Patricia Jitodai
Permit #: D11 -376
Plan Review: Allen Johannessen, Plans Examiner
Tukvvila Building Division
Allen Johannessen, Plan Examiner
The Building Division conducted a plan review on the subject permit application. Please address the
following comments in an itemized format with revised plans, specifications and/or other applicable
documentation.
(GENERAL NOTE)
PLAN SUBMITTALS: (Min. size 11x17 to maximum size of 24x36; all sheets shall be the same size).
(If applicable) Structural Drawings and structural calculations sheets shall be original signed wet
stamped, not copied.)
1. Complete the WSEC Lighting summary form for all new and existing lighting.
2. The ADA bathroom does not meet accessibility for clear space around the water closet. No other
fixtures or obstructions shall be within the required water closet clearance. A clearance around a
water closet 60 inches minimum, measured perpendicular from the sidewall, and 56 inches minimum,
measured perpendicular from the rear wall, shall be provided. Provide dimensions for the bathroom.
Show the clearance around the water closet per code. Show grab bars with the specifications and
dimensions for grab bars around the water closet. (2003 ANSI 604.3, 604.3.2 & 604.5.1, IBC 3411.6
& 3411.7)
3. Show an exhaust fan for the bathroom vented to the outside.
4. For clarity, show on the floor plan specifically where the valance detail 6/A -3 is located.
5. The "Optical" counter adjacent to the reception desk may not have sufficient clearance for accessible
access. Minimum access through an opening shall be 30" clear width in a mercantile pad. Show all
areas provided with clear access as required by ADA accessibility code. Access aisles shall be a
continuous unobstructed path. (IBC 1017.3)
6. The reflective ceiling plan does not show or specify mechanical ventilation or air- conditioning.
Indicate what if any mechanical air - condition alterations or additions. Separate mechanical permit
required for mechanical work.
Should there be questions concerning the above requirements, contact the Building Division at 206-
431 -3670. No further comments at this time.
HERMIT COORD COPP
PLAN REVIEW /ROUTING SLIP
ACTIVITY NUMBER: D11 -376
PROJECT NAME: DR. PATRICIA JITODAI
SITE ADDRESS: 16870 SOUTHCENTER PY
Original Plan Submittal
X Response to Correction Letter # 1
DATE: 12/08/11
Response to Incomplete Letter #
Revision # after Permit Issued
DEPARTMENTS:
BtIil�Ping Division I®
Public Works
Fire Prevention
Structural
Planning Division
Permit Coordinator n
DETERMINATION OF COMPLETENESS: (Tues., Thurs.)
Complete .1K1,
Incomplete
DUE DATE: 12/13/11
Not Applicable
Comments:
Permit Center Use Only
INCOMPLETE LETTER MAILED: LETTER OF COMPLETENESS MAILED:
Departments determined incomplete: Bldg ❑ Fire ❑ Ping ❑ PW ❑ Staff Initials:
TUES/THURS ROUTING:
Please Route 1
Structural Review Required n
REVIEWER'S INITIALS:
No further Review Required
DATE:
APPROVALS OR CORRECTIONS:
Approved Approved with Conditions
Notation:
REVIEWER'S INITIALS:
DUE DATE: 01/10/12
Not Approved (attach comments) n
DATE:
Permit Center Use Only
CORRECTION LETTER MAILED:
Departments issued corrections: Bldg ❑ Fire ❑ Ping ❑ PW ❑ Staff Initials:
Documents /routing slip.doc
2 -28 -02
Y •
PLAN REVIEW /ROUTING SLIP
ACTIVITY NUMBER: D11 -376 DATE: 11 -23 -11
PROJECT NAME: DR PATRICIA JITODAI
SITE ADDRESS: 16870 SOUTHCENTER PY
X Original Plan Submittal
Response to Correction Letter #
Response to Incomplete Letter #
Revision # After Permit Issued
DEPARTMEN S:
DN�slon
� ll�ti � l
Wor s
� 4Ye\Prevention
11
ui ding
Structural
Planning" Division
Permit Coordinator
DETERMINATION OF COMPLETENESS: (Tues., Thurs.) DUE DATE: 11-29-11
Complete
Incomplete
Not Applicable
Comments:
Permit Center Use Only
INCOMPLETE LETTER MAILED: LETTER OF COMPLETENESS MAILED:
Departments determined incomplete: Bldg ❑ Fire ❑ Ping ❑ PW ❑ Staff Initials:
TUES /THURS ROUTING:
Please Route
Structural Review Required
❑ No further Review Required
n
REVIEWER'S INITIALS: DATE:
APPROVALS OR CORRECTIONS:
Approved
DUE DATE: 12-27-11
Approved with Conditions n Not Approved (attach comments) Nt
Notation:
REVIEWER'S INITIALS: DATE:
Permit Center Use Only
CORRECTION LETTER MAILED: te)-`40'-‘, V4 Departments issued corrections: Bldg Fire ❑ Ping ❑ PW ❑ Staff Initials:
Documents /routing slip.doc
2 -28 -02
• •
City of Tukwila
Deportment of Community Development
6300 Southcenter Boulevard, Suite # 100
Tukwila, Washington 98188
Phone: 206 - 431 -3670
Fax: 206 - 431 -3665
Web site: http: / /www.ci.tukwila.wa.us
REVISION SUBMITTAL
Revision submittals must be submitted in person at the Permit Center. Revisions will not be accepted through
the nail, fax, etc.
Date: 12 -8 -2011
Plan Check/Permit Number: D11 -376
❑ Response to Incomplete Letter #
® Response to Correction Letter # 1
❑ Revision # after Permit is Issued L
❑ Revision requested by a City Building inspector or Plans Examiner
Project Name: Dr. Patricia Jitodai
Project Address: 16870 Southcenter Parkway
Contact Person: Alan C. Keimig
'wry rocnn wp.
DEC 0 8 2011
HERMIT CENTER
Phone Number: 253- 939 -3232
Summary of Revision:
Package includes WSEC Lighting summary.
Delineated detail locations on drawing, required clear floor spaces in the mercantile
area, added mechanical ventilation notes, addressed accessiblilty in restroom.
Corrected ADA bathroom to meet the clear floor space around the water closet.
Sheet Number(s): A -2, A -4, A -6
"Cloud" or highlight all areas of revision including date of revision
Received at the City of Tukwila Permit Center by:
❑ Entered in Permits Plus on
\applicationslfomis- applications on line\revision submittal
Created: 8 -13 -2004
Revised: 1 -2009
Contractors or Tradespeople Peer Friendly Page
•
General /Specialty Contractor
A business registered as a construction contractor with LEI to perform construction work within the scope of
its specialty. A General or Specialty construction Contractor must maintain a surety bond or assignment of
account and carry general liability insurance.
Business and Licensing Information
Name NORTHWEST GREEN BUILDERS LLC UBI No. 603167520
Phone 2065506062 Status Active
Address 4509 Interlake Ave N License No. NORTHGB882CP
Suite /Apt. # 224 License Type Construction Contractor
City Seattle Effective Date 2/17/2012
State WA Expiration Date 2/17/2014
Zip 98103 Suspend Date
County King Specialty 1 General
Business Type Limited Liability Company Specialty 2 Unused
Parent Company
Business Owner Information
Name
Role
Effective Date
Expiration Date
ROACH, SEAN ANDREW
Partner /Member
12/27/2011
Bond Information
Page 1 of 1
Bond
Bond Company Name
Bond Account Number
Effective Date
Expiration Date
Cancel Date
Impaired Date
Bond Amount
Received Date
1
American Contractors
Indem CO
100187983
02/16/2012
Until Cancelled
$12,000.00
02/17/2012
Assignment of Savings Information No records found for the previous 6 year period
Insurance Information
Insurance
Company Name
Policy Number
Effective Date
Expiration Date
Cancel Date
Impaired Date
Amount
Received Date
1
Nevada Capital
Ins Co
77NPP4023386
12/28/2011
12/28/2012
$1,000,000.00
02/17/2012
Summons /Complaint Information No unsatisfied complaints on file within prior 6 year period
Warrant Information No unsatisfied warrants on file within prior 6 year period
https: // fortress .wa.gov /lni/bbip /Print.aspx 02/27/2012
REVISIONS
AUDIBLE AND VISUAL
FIRE ALARM ANNUNCIATOR
COMMON PATH OF EGRESS TRAVEL = 89' -8' (MAX. =100' SPRINKLED)
11NW
1395.5 SF. /100 SF. PER OCCUPANT L. 14 OCCUPANTS
1 EXIT REQUIRED
NORTH
1/8• -1 -0•
FILE COPY
Permit No. \— 3-7,,
PI ^r r ^view approval is subject to errors and omissions.
1 .` al, oo6 E stf uction documents does not authorize
1 ._ to r, tny ^opted code or ordinance. Receipt
c. ,drovoo is acknowledged:
nsuN)
CONSULTANTS
OUIIER
PARKWAY SQUARE, LLC
C/o ROSEN PROERTIES
PO BOX 5003
G~LLEVUE, WA 98009
TENANT:
RR. PATRICIA JITOIDAI
16810 SOUTHCENTER PKWY
TUKUJILA, WA 98188
ARCHITECT=
THE KEIMIG ASSOCIATES
216 A STREET NUJ
AUBURN, UJA. 98001
253 -939 -3232
FAX: 253 -135 -1309
GENERAL CONTRACTOR:
DONOVAN BROTHERS
1801 W. VALLEY 1-1U1Y. NORTH, SUITE 101
AUBURN, WA 98001
253-939-1111
PROJECT DATA.
PROJECT LOCATION:
PARKWAY SQUARE
16810 SOUTHCENTER PKWY
TUKWILA, WA 98188
APPLICABLE CODES:
2009 1$.C. WITH WASH. STATE -WIDE AMENDMENTS
ICC /ANSI A111.1/2003
2009 IM.C:, WITH W,4 STATE; AMENDMENTS
2009IFC 4 1f14,WA'STATE'AMENDMENTS
2003 W.S.E:C
c 9T OF TUKWILA ZONING:
CONSTRUCTION TYPE:
r ..CUPANCY CLASSIFICATION:
TOTAL LOT AREA:
EU'LDING AREA:
EN NIT AREA:
TUC (TUKWILA URBAN CENTER)
v -B (SPRINKLED)
B
33 ACRES (144 ,341 SF.)
31,003 SF
1 ,395.5 SF
TAX PARCEL u AND LEGAL DESCRIP.
2623049129 PARKWAY SQUARE
BEG SE COR OF SE 1/4 OF NW 1/4 TH N 89 -43 -19 W 619.81 FT TN N 0 -51 -48 W 21810 FT TI-1S
S9 -45 -58 E 321.51 FT TH N 0 -14 -02 E 2250 FT TH 5 89 -45 -58 E 300 FT TO E MGN SE 1/4 OF
NW 1/4 TH S TO TPOB AKA POR PARCEL 4 CITY OF TUKWILA SHORT PLAT NO 11 -51
RECORDING NO 1110130634 - AKA PARCEL C OF CITY OF TUKWILA BINDING SITE PLAN,
PARKWAY SQUARE, RECORDING NO 1912050183
16870 SOUTHCENTER PKWY
TUKWILA, WA 98188 __
REVISIONS
Plra r,hanges Shall be made to the scope
tit work without prior .approval of
Tukwila Building Division.
t! T ; LIv1^1c"'o will require a new plan submittal
c: l may in :!u +de additional plan review fees.
PLANNING APPROVED
No changes can be made to these
plans without approval from the
Planning Division of DCD
Approved By: - 41
Date:
Erviechanical
E Electrical
[2131umbing
was Piping
of Tukwila
r ,1C1 DIVISION
FIRE SUPPRESSION SYSTEM (FIRE DEPT.)
FIRE ALARM SYSTEM (FIRE DEPT) .
SEPARATE PERMITS
ELECTRICAL
MECHANICAL HvAC
PLUMBING
A -I VICINITY MAP, KEY BUILDING PLAN,
SITE PLAN, EGRESS PLAN
A -2 FLOOR PLAN, FINISH FLOOR
WALL AND DOOR SCHEDULES
A -3 DETAILS
A -4 REFLECTED CEILING PLAN
DATA AND POWER PLAN
ENERGY COMPLIANCE NOTES
A -5 SUSPENDED CEILING DETAIL
SUSPENDED CEILING NOTES
A -6 TOILET ELEVATIONS 4 PLANS, DETAILS
A -1 CABINET ELEVATIONS 4 PLANS, DETAILS
A -8 CABINET ELEVATIONS 4 PLANS
REVIEWED FOR
CODE COMPLIANCE
APPROVED
RECEIVED
CITY OF TUKWILA
DEC 082011
PERMIT CENTER
d) EXISTING SITE PLAN. NO CHANGE
SCALE' . • 30'
CTION
JOB NUMBER
DATE II- 23-2011
SHEET A-1
OF V
7AD \201,1 \11 -On r,.,
rof trist \Ontnmetrist 12- 07- 11.dwq, A -1.. 12./7/2.011 11:46:02 AM, \ \PLOTTER \RW -240WP
ICC /ANSI A111.1 -2003
4042.6 DOOR HARDWARE
HANDLES, PULLS, LATCHES, LOCKS, AND OTHER OPERABLE
PARTS ON ACCESSIBLE DOOR SHALL HAVE A SHAPE THAT
IS EASY TO GRASP WITH ONE HAND AND DOES NOT
REQUIRE TIGHT GRASPING, PINCHING, OR TWISTING OF THE
WRIST TO OPERATE. OPERABLE PARTS OF SUCH
HARDWARE SHALL BE 34 INCHES MINIMUM AND 48 INCHES
MAXIMUM ABOVE THE FLOOR.
4042:1.! DOOR CLOSERS
DOOR CLOSERS SHALL BE ADJUSTED W THAT FROM AN
OPEN POSITION OF 90 DEGREES, THE TIME REQUIRED TO
MOVE THE DOOR TO AN OPEN POSITION OF 12 DEGREES
SHALL BE 5 SECTIONS.
404.29 (IBC 2006 100812) DOOR- OPENMG FORCE.
FIRE DOORS SHALL HAVE THE MINIMUM OPENINS FORCE
ALLOWABLE BY THE OPEAABLE ADMINISTRATIVE
AUTHORITY. THE MAXIMUM FORCE FRO PUSHING OPEN OR
PULLING OPEN DOORS OTHER THAT FIRE DOORS SHALL SE
AS FOLLOWS:
INTERIOR HINGED DOOR: 5.0 POUNDS
SLIDING OR FOLDING DOORS: 15.0 POUNDS
AT EXTERIOR DOOR WHERE ENVIRONMENTAL CONDITIONS
REQUIRE A CLOSING PRESSURE GREATER THAT 8.5
POUNDS, POWER OPERATED DOOR SHALL BE USED WITHIN
THE ACCESSIBLE ROUTE OF TRAVEL.
PORCELAIN
CPT
U)AITING
CPT
ummnsammanomm-
ilmomummorrnmosin
i ■umom amorm■
/Amiummommailm_
r ■ ■•■ impummum
CPT
THESE FORCES DO NOT APPLY TO THE FORCE REQUIRED
TO RETRACT LATCH BOLTS OR DISENGAGE OTHER
DEVICES THAT HOLD THE DOOR IN A CLOSED POSITION.
1@C 2Z B
MKS. DOOR OPERATIONS
EXCEPT AS SPECIFICALLY PERMITTED BY THIS SECTION
EGRESS DOORS SHALL BE READILY OPENABLE PROM THE
EGRESS SIDE WITHOUT THE USE OF A KEY OR SPECIAL
KNOWLEDGE OR EFFORT.
ir_e
(:),
Ili O
o
r,e
� O
Z
Z
c„--2
ce
100819.4 BOLT LOCKS
MANUALLY OPERATED FLUSH BOLTS OR SURFACE BOLTS
ARE NOT PERMITTED.
1008.195 UNLATCHINQ
THE UNLATCHING OF ANY LEAF SHALL NOT REQUIRE
MORE THAN ONE OPERATION.
REMOVE EX. CONDUIT
AND ELECT. BOX
TEMPERED GLAZING
'ARTSCAPE' OR 'LIGHT EFFECTS' WINDOW FILM
APPLIED TO INSIDE OF DOOR WINDOW.
DOOR ELEVATIONS O AND O (SIMILAR)
REMOVE EX. CONDUIT
AND ELECT. BOX
REMOVE EXISTING
DOOR AND FRAME.
EXISTING
I TOILET
REMOVE AND RELOCATE
EXISTING SINK
PARTIAL EXISTING/DEMO PLAN
�"'"'" SCALE, vrwm
DOOR SCHEDULE
MARK
SIZE
DESCRIPTION
REMARKS
®
EXISTING
EX. STOREFRONT
EXISTING, NO CHANGE
®
NEW 331•
HM. FRAME, SOLID
CORE DOOR
LEVER HARDWARE, LOCKSET, WALL STOP, VISION PANEL
®
NEW 3'x1'
H.M. FRAME, SOLID
CORE DOOR
LEVER HARDWARE, LOCKSET, WALL STOP,
CONTINUOUS SMOKE GASKET
®
NEW 3'x1'
HM. FRAME, SOLID
CORE DOOR
PASSAGE LEVER HARDWARE, WALL STOP
3 DOOR SILENCERS, COAT HOOK ON BACK OF DOOR * +60'
4
NEW 3'x7'
H.M. FRAME, SOLID
CORE DOOR
PASSAGE LEVER HARDWARE, WALL STOP
3 DOOR SILENCERS, COAT HOOK ON BACK OF DOOR * +44'
®
NEW 3'x1'
HM. FRAME, SOLID
CORE DOOR
PASSAGE LEVER HARDWARE, WALL STOP
3 DOOR SILENCERS, COAT 1100K ON BACK OF DOOR * +60'
,
NEW 3'x1°
• HM. FRAME, SOLID
CORE DOOR
PASSAGE LEVER HARDWARE, WALL STOP
3 DOOR SILENCERS
®
NEW 3'x1'
HM. FRAME, SOLID
CORE DOOR
LEVER HARDWARE, LOCKSET, WALL STOP, VISION PANEL - TRANSLUCENT
3 DOOR SILENCERS, COAT HOOK ON BACK OF DOOR • +60'
S
NEW 3'x1'
NEW HM. FRAME, SOLID
CORE DOOR
PRIVACY LEVER HARDWARE, WALL STOP
3 DOOR SILENCERS
11
0
WALL SCHEDULE
EXISTING WALL. NO CHANGE
SOUND ATTENUATED WALLS AT LAB
24 GA MTL SIDS * 24' O.C., 5/8' QUIET ROCK 521 ON EACH SIDE TO
CEILING HEIGHT. FILL ALL WALL CAVITIES WITH SOUND INSULATION.
24 GA MTL STDS e; 24' O.C., 5/8' GW8 ON EACH SIDE TO +6' ABOVE
CEILING. FILL ALL WALL CAVITIES WIN SOUND INSULATION.
24 GA MTL STDS *24' O.C., 5/8' GWB ON EACH SIDE TO GM CEILING
ABOVE.
D
vAlAr
NOTES:
RELOCATE EXISTING SPRINKLER HEADS TO PROVIDE COMPLETE
COVERAGE. CONTRACTOR TO SUBMIT DRAWINGS TO LOCAL AUTHORITIES.
REPLACE EXISTING SPRINKLER HEADS WITH CONCEALED HEADS AND PLUSH
WHITE COVERS IN MAIN WAITING AREA RECEPTION, AND OPTICAL.
PROVIDE STANDARD FLUSH HEADS IN ALL OTHER ROOMS AND HALLWAY.
PROVIDE CADET =UJALL HEATER WITH THERMOSTAT.
b137b
REVIEWED FOR
CODE COMPLIANCE
APPROVED
DEC 16 2011
VERIFY NON - REMOVABLE
PINS IN HINGES. PROVIDE
LATCH GUARD IF NONE.
DR'S
OFFICE
J +29'
VISUAL
FIELDS
REFRESHMENTS
LAB OFFICE
WAITING.
CONTACTS
REF.
UNDE
B.O.
5Y OWNER
1' -4'
EXAM 'PI
EXAM #2
SHOWCASE
+42'
OPTICAL
r
REMOVE EXISTING WATE
HEATER, REPLACE
WITH NEW 30 GALLON
HEATER WITH PLYWOOD
PLATFORM ABOVE
TOILET CEILING
PROVIDE STRUCT
BACKING FOR
PIVOTING MIRRORS
AND PROJECTOR
DIN
PROVIDE STRUCT
BACKING FOR
PIVOTING MIRRORS
GLASS
SHELVES
JOB NUMBBR'
5 BARS,
FURNISHED B.O.
12' -0'
12' -0' 41. 10' -0' 4.� ' 4' -0' 4: ' 5' -0'
1' -4' 6' -0'
1' -4' 5' -0'
PROPOSED FLOOR PLAN
CI**, "'P1" v•w•
7AD \2011 \i.1 -00 Ontometrist \Optometrist 12- 07- 11.dwg, A -2, 1.2/7/2011 4:06:03 PM, \ \PLOTTER \RW -240WP
RECEIVED
CITY OF TU_IKWILA
DEC 08 2011
PERMIT CENTER
DATE 11 -23 -2011
SHEET A - Z
OF 8
LARSON(OR APPROVED)
FIRE EXTINGUISHER CAB.
(2409 -6R) SURFACE MOUNTED
W /IO L. ABC
FIRE CAB ELEVATION
ka'GWBEASIDE
MTL FRAMING
11 `1 'Mill r.
VERIFY REQ'D ROUGH
OPENING 13'X28'
EXT. CAB
SC r., -0f
TO ROOF STRUCTURE
NEW SUSPENDED
CEILING +12' -0'
WALL GUYED
PER PLAN
4
LED PLAN PER
•
L
+12' -0'
NEW LIGHT VALENCE
CURVED PER PLAN
+9' -0'
CURVED VALENCE DETAIL
MALE 3' ■ ru•
c.t•
43/
+12' -0'
NEW SUSPENDED
CEILING o +12' -0'
EXISTING DEMISING
WALL, NO CHANGE
C L
2' -0'
LED PER
PLAN
NEW LIGHT VALENCE
AST VALENCE DETAIL,
3cue
+12' -0'
NEW LIGHT VALENCE
+9' -0'
NEW SUSPENDED
CEILING 6 +12' -0'
EXISTING DEMISING
WALL, NO CHANGE
44
LED PER
PLAN
- •
l' -0'
WEST /NORTH VALENCE
RALE
•
•
410)
41
Ol•
fib
10
011)
•
flo■
4111■
441
O.%
DE AIL
♦ur •ray
STAGGER ELECTRICAL BOXES ON EITHER SIDES
OF STUDS. TYPICAL FOR ALL SOUND WALLS
+1•• .. '.• . -.+ 1....•b•'.........•.1..... .•.
... i...,.. •. n .. n.... n h. 1 ....tr ... .. . v .......: V 't. "... . •'4'� . .... it's
FACELESS SOUND INSUL.
TYPICAL CONT. CONSTRUCTION
FRAMING
WALL PER SCHEDULE
NEW ACT CEILING
EX. SLAB. -1
TYPICAL Wyky, L
SCALE
NEW ACT CEILING
WALL PER SCHEDULE
5/8' GWB EACH SIDE
FACELESS SOUND INSUL.
1/4' POWER SHOT STUDS
e32' O.C. MIN 1' EMBED
CONTINUOUS SOUND ATTENUATED
J CAULK BOTH SIDES (OPTIONAL)
CEILING JOISTS
ACT CEILING
EX. SLAB. -'
141WAWI
5/8' QUIET ROCK 521
CONTINUOUS SOUND ATTENUATED
CAULK
LAE
WALL PER SCHEDULE
5/8' QUIET ROCK 521
GYPSUM EACH SIDE
FACELESS SOUND INSUL.
14' POWER SHOT STUDS
632' O.C. MIN 1' EMBED
CONTINUOUS SOUND ATTENUATED
CAULK BOTH SIDES.
SOUND ATTENUATED WA11..I.A
SCne
24 G,4 METAL STUDS m 24' O.C.
SOUND INSULATION
5/8' GWB EACH SIDE, PAINTED
HOLLOW METAL DOOR FRAME
(INN
II
REVIEWED FOR
CODE COMPLIANCE
APPROVED
DEC 16 2011
City of Tukwila
BUILDING DIVISION
SOLID COOR, WOOD VENEER
DOOR PER SCHHDULE i
t)1137150
TYPICAL
RECEIVED
CITY OF
DEC 0 B 2011
PRO t-1/2 'ITCtNTER
incR HEADER /JAMB DETAIL
REVISIONS
OPTOMETRIST
ww�
N U
cc a
0 o
Y =
3
U
z°
¢g
Z M
N
V CO
ch
V=i ' N
<, g
NZ
QD
•o co
N a /.,
4- vi,'S‘<'‘)
G
Q
W
Z
ARCHITECTS
PLANNERS
'AD\201.1\11 -00 (1ntrmrtrikt \Ontnrnetrist 12- 07- 11.dwq, A -3 pet, 12/7/2011 11:46:31 AM, \ \PLOTTER \RW -240WP
JOB NUMBER
DATE II- 23 -2011
SHEET A-3
OF V
LIGHTING - GENERAL REQUIREMENTS
813 LIGHTING CONTROLS:
LIGHTING, INCLUDING EXEMPT LIGHTING IN SECTION 1512, SHALL
COMPLY WITH THIS SECTION. WHERE OCCUPANCY SENSORS
ARE CITED, THEY SHALL HAVE THE FEATURES LISTED IN
SECTION 15136.1. WHERE AUTOMATIC TIME SWITCHES ARE CITED,
THEY SHALL HAVE THE FEATURES LISTED IN SECTION 151362.
813.1 LOCAL CONTROL. AND ACCESSIBILITY:
EACH SPACE, ENCLOSED BY WALLS OR CEILING - HEIGHT
PARTITIONS, SHALL BE PROVIDED. WITH LIGHTING CONTROLS
LOCATED WITHIN THAT SPACE. THE LIGHTING CONTROLS,
WHETHER ONE OR MORE, SHALL BE CAPABLE OF TURNING OFF
ALL LIGHTS WITHIN THE SPACE. THE CONTROLS SHALL BE
READILY ACCESSIBLE, AT THE POINT OF ENTRY/EXIT, TO
PERSONNEL OCCUPYING OR USING THE SPACE.
8132 AREA CONTROLS:,
THE MAXIMUM LIGHTING POWER THAT MAY BE CONTROLLED
FROM A SINGLE SWITCH OR AUTOMATIC CONTROL SHALL NOT
EXCEED THAT WHICH IS PROVIDED BY A 20 AMPERE CIRCUIT
LOADED TO NOT MORE THAN 80 %. A MASTER CONTROL MAY
BE INSTALLED PROVIDED THE INDIVIDUAL SWITCHES RETAIN
THEIR CAPABILITY TO FUNCTION INDEPENDENTLY. CIRCUIT
BREAKERS MAY NOT BE USED AS THE SOLE MEANS OF
SWITCHING.
8133 DAYLIGHT ZONE CONTROL:
ALL DAYLIGHTED ZONES, AS DEFINED IN CHAPTER 2, BOTH
UNDER OVERHEAD GLAZING AND ADJACENT TO VERTICAL
GLAZING, SHALL BE PROVIDED WITH INDIVIDUAL CONTROLS, OR
DAYLIGHT- OR OCCUPANT- SENSING AUTOMATIC CONTROLS,
WHICH CONTROL THE LIGHTS INDEPENDENT OF GENERAL AREA
LIGHTING.
CONTIGUOUS DAYLIGHT ZONES ADJACENT TO VERTICAL
GLAZING ARE ALLOWED TO BE CONTROLLED BY A SINGLE
CONTROLLING DEVICE PROVIDED THAT THEY DO NOT INCLUDE
ZONES FACING MORE THAN TWO ADJACENT CARDINAL
ORIENTATIONS (LE. NORTH, EAST, SOUTH, WEST). DAYLIGHT
ZONES UNDER OVERHEAD GLAZING MORE THAN 15 FEET FROM
THE PERIMETER 51-IALL BE CONTROLLED SEPARATELY FROM
DAYLIGHT ZONES ADJACENT TO VERTICAL GLAZING.
813,4 DISPLAY. EXHIBITION AND. SPECIALTY LIGHTING CCNTROLI
ALL. DISPLAY, EXHIBITION OR SPECIALTY LIGHTING SHALL BE
CONTROLLED INDEPENDENTLY OF GENERAL AREA LIGHTING.
8139 AUTOMATIC SHUT - OFF CONTROLS EXTERIOR:
LIGHTING FOR ALL EXTERIOR APPLICATIONS SHALL NAVE
AUTOMATIC CONTROLS CAPABLE OF TURNING OFF EXTERIOR
LIGHTING WHEN SUFFICIENT DAYLIGHT IS AVAILABLE OR WHEN
THE LIGHTING IS NOT REQUIRED DURING NIGHTTIME HOURS.
LIGHTING NOT DESIGNATED FOR DUSK -TO -DAWN OPERATION
SHALL BE CONTROLLED BY EITHER:
A. A COMBINATION OF A PHOTOSENSOR AND A TIME
SWITCH, OR
B. AN ASTRONOMICAL TIME SWITCH.
LIGHTING DESIGNATED FOR DUSK -TO -DAWN OPERATION SHALL
BE CONTROLLED BY AN ASTRONOMICAL TIME SWITCH OR
PHOTOSENSOR ALL TIME SWITCHES SHALL BE CAPABLE OF
RETAINING PROGRAMMING AND NE TIME SETTING DURING LOSS
OF POWER FOR A PERIOD OF AT LEAST 10 HOURS.
EXCEPTION : LIGHTING FOR COVERED VEHICLE
ENTRANCES OR EXITS FROM BUILDINGS OR PARKING
STRUCTURES WHERE REQUIRED FOR SAFETY, SECURITY,
OR EYE ADAPTATION,
8136 AUTOMATIC 814U• - OFF CONTROLS. INTERIOR:
BUILDINGS GREATER THAN 5,000 S.F. AND ALL SCHOOL
CLASSROOM SHALL BE EQUIPPED WITH SEPARATE
AUTOMATIC CONTROLS TO SHUT OFF THE LIGHTING DURING
UNOCCUPIED HOURS. WITHIN THESE BUILDINGS, ALL OFFICE
AREAS LESS THAN 300 SF. ENCLOSED BY WALLS OR CEILING -
HEIGHT PARTITIONS, AND ALL MEETING AND CONFERENCE
ROOMS, AND ALL SCHOOL CLASSROOMS, SHALL BE EQUIPPED
WITH OCCUPANCY SENSORS THAT COMPLY WITH SECTION 15136.1.
FOR OTHER SPACES, AUTOMATIC CONTROLS MAY BE AN
OCCUPANCY SENSOR, TIME SWITCH OR OTHER DEVICE
CAPABLE OF AUTOMATICALLY SHUTTING OFF LIGHTING.
8136.1 OCCUPANCY SENSORS:
OCCUPANCY SENSORS SHALL BE CAPABLE OF AUTOMATICALLY
TURNING OFF ALL THE LIGHTS IN AN AREA, NO MORE THAN 30
MINUTES AFTER THE AREA HAS BEEN VACATED. LIGHT FIXTURES
CONTROLLED BY OCCUPANCY SENSORS SHALL HAVE A
WALL- MOUNTED, MANUAL SWITCH CAPABLE OF TURNING OFF
LIGHTS WHEN THE SPACE IS OCCUPIED.
EXCEPTION: OCCUPANCY SENSORS IN STAIRWELLS ARE
ALLOWED .TO HAVE TWO STEP LIGHTING (HIGH -LIGHT AND
LOW- LIGHT) PROVIDED THE CONTROL FAILS IN THE
HIGH - LIGHT POSITION.
813.62 AUTOMATIC TIME WATCHES:
AUTOMATIC TIME SWITCHES SHALL HAVE A MINIMUM 1 DAY
CLOCK AND BE CAPABLE OF BEING SET FOR 1 DIFFERENT DAY
TYPES PER WEEK AND INCORPORATE AND AUTOMATIC HOLIDAY
"SHUT- OFF "FEATURE, WHICH TURNS OFF ALL LOADS FOR AT LEAST
24 HOURS AND THEN RESUMES NORMALLY SCHEDULED
OPERATIONS. AUTOMATIC TIME SWITCHES SHALL ALSO HAVE
PROGRAM BACK -UP CAPABILITIES, WHICH PREVENT THE LOSS
OF PROGRAM AND TIME SETTINGS FOR AT LEAST 10 HOURS, IT
POWER IS INTERRUPTED.
B13.1 COMMI88IONING REQUIREh'ENTS:
FOR LIGHTING CONTROLS WHICH INCLUDE DAYLIGHT OR
OCCUPANT SENSING AUTOMATIC CONTROLS, AUTOMATIC
SHUT -OFF CONTROLS, OCCUPANCY SENSORS, OR AUTOMATIC
TIME SWITCHES, THE LIGHTING CONTROLS SHALL BE TESTED TO
ENSURE THAT CONTROL DEVICES, COMPONENTS, EQUIPMENT
AND SYSTEMS ARE CALIBRATED, ADJUSTED AND OPERATE IN
ACCORDANCE WITH APPROVED PLANS AND SPECIFICATIONS.
SEQUENCES OF OPERATION SHALL BE FUNCTIONALLY TESTED TO
ENSURE THEY OPERATE IN ACCORDANCE WITH APPROVED
PLANS AND SPECIFICATIONS. A COMPLETE REPORT OF TEST
PROCEDURES AND RESULTS SHALL BE PREPARED AND FILED
WITH THE OWNER DRAWING NOTES SHALL REQUIRE
COMMISSIONING IN ACCORDANCE WITH THIS PARAGRAPH.
LIGHTING AND ELECT LEGEND
SYMBOL
DESCRIPTION
QTY.
WATTS
2x2 FLUOR. RECESSED FIXTURE,
13
64
-
171
COLUMBIA STR24- 322G- MPO -EU
2 LAMP T -8, W/ELECTRONIC BALLAST WITH
PHOTOCELL OR PROGRAMMABLE DIMMING CONTROL
-0-
PENDANT FIXTURE
1
32
q
NILES FORECAST FI065 -16
+18' WALL SCONCE FIXTURE
12
32
g
MINKA LAVERY - 504- 11 -PL, GU24 SPIRAL FLUORESCENT,
+12' DIMABLE WALL SCONCE FIXTURE
13
13
EXEMPT FROM 2009 WSEC SECTIONS 1520 THROUGH 1522
UNDER 15122 41
•
COMPACT FLUORESCENT CANISTER DOWN LIGHT
6
32
LED MR16, 6 WATTS, WHITE TRIM KIT
20
PROGRAMMED TIMER, TIME OF OPERATION 9 :00 AM TO 10 :00 PM
EXEMPT FROM 2009 WSEC SECTIONS 1520 THROUGH 1522
UNDER 15122 "10
LED MRI6 (6W), CASUAL 5 -HEAD RAIL KIT
3
30
L d
TECH LTG- 800RAL5CWZ
MULTI -COLOR CHANGING LED ROPE LIGHT CONTINUOUS
AROUND VALENCE.
PROGRAMMED TIMER, TIME OF OPERATION 5 :00 PM TO 10 :00 PM
z1
FIXTURES WITH 'ZI' LABEL ARE IN DAYLIGHTING ZONE I AND
MUST BE PROVIDED WITH INDIVIDUAL CONTROLS.
MUST BE CONTROLLED SEPARATELY THAN ZONE 2
Z2
FIXTURES WITH 'Z2' LABEL ARE IN DAYLIGHTING ZONE 2 AND
MUST BE PROVIDED WITH INDIVIDUAL CONTROLS.
MUST BE CONTROLLED SEPARATELY THAN ZONE 1
rim
gOi
EXHAUST FAN VENTED TO EXT., TYP.
SWITCH
!
3 -WAY SWITCH
_ 4IM
-DIMABLE SWITCH �- -
-
A
1 *Xld
EXIT SIGN (5 WATTS MAX)
INTERIOR BUILDING LIGHTING
PERSCRIPTIVE LIGHTING OPTION
821 PRESCRIPTIVE INTERIOR LIGHTING REQUIREMENTS:
SPACES FOR WHICH THE Ur'. :T LIGHTING PER ALLOWANCE IN TABLE 5-116
0.80 W /SF. OR GREATER MAY USE UNLIMITED NUMBER OF LIGHTING FIXTURES
AND LIGHTING ENERGY, PROVIDED THAT THE INSTALLED LIGHTING FIXTURES
COMPLY WITH ALL FOUR OF THE FOLLOWING CRITERIA.
a. ONE- OR TWO -LAMP (BUT NOT THREE- OR MORE LAMPS).
b. LUMINARIES HAVE A REFLECTOR OR LOUVER ASSEMBLY TO DIRECT THE
LIGHT (BARE LAMP STRIP OR INDUSTRIAL FIXTURES DO NOT COMPLY
WITH THIS SECTION).
c. FITTED WITH TYPE T -1, T -2, T -4, 7-5, T -8 COMPACT FLUORESCENT LAMPS
FROM 5 TO 60 WATTS (BUT NOT T -I0 OR T -I2 LAMPS), AND
d. HARD -WIRED FLUORESCENT ELECTRONIC DIMMING BALLASTS WITH
PHOTOCELL OR PROGRAMMABLE DIMMING CONTROL FOR ALL LAMPS IN
ALL ZONES (NONDIMMING ELECTRONIC BALLASTS AND ELECTRONIC
BALLASTS THAT SCREW INTO MEDIUM BASE SOCKETS DO NOT COMPLY
WITH THIS SECTION).
EXCEPTIOPNS
I. UP TO A TOTAL OF 5% OF INSTALLED LIGHTING FIXTURES MAY USE ANY
TYPE OF BALLESTED LAMP AND DO NOT REQUIRE DIMMING CONTROLS.
2. CLEAR SAFETY LENSES ARE ARE ALLOWED IN FOOD PREP AND
SERVING AREAS AND PATIENT CARE AREAS IN OTHERWISE COMPLIANT
FIXTURES.
3. LW LIGHTS.
4. METAL HALIDE LIGHTING WHICH COMPLIES WITH ALL THREE OF THE
FOLLOWING CRITERIA:
1. LUMINAIRES OR LAMPS WHICH HAVE A REFLECTOR OR LOUVER
ASSEMBLY TO DIRECT THE LIGHT,
11. FIXTURES ARE FITTED WITH CERAMIC METAL HALIDE LAMPS NOT
EXCEEDING 150 WATTS, AND
111. ELECTRONIC BALLASTS.
REVISIONS
U' 12 -1 -11 REV. PER CITY
REMOVE ALL (53) 2x2 64 W RECESSED
FLUORESCENT FIXTURES.
REMOVE VANITY FIXTURE IN BATHROOM
NOTE.
MECHANICAL SUB - CONTRACTOR TO PROVIDE
THE REQUIRED VENTILATION PER TENANT USE
AS SPECIFIED PER THE 2009 MC WITH STATE
AMENDMENTS AND THE VENTILATION AND
INDOOR AIR QUALITY CONTROL CODE.
LIGHT CENTERED
LIGHT CENTERED
LIGHT CENTERED
HIDDEN LINE REPRESENTS BLUE FIBER OPTIC
LIGHT ABOVE VALENCE.
€ 10' -0'
ECTRIC
HEADER
98'-0'
GWB 9' -0'
101 -0'
IN PICTURE
BOX
EXISTING RECESSED CEILING
FAN EXHAUSTING TO THE
EXTERIOR, NO CHANGE
TV -+90'
LED MR16 LAMPS
IN BUILT IN DISPLAY
FIXTURES, TYP.
HIDDEN LINE REPRESENTS BLUE FIBER OPTIC
LIGH7 ABOVE VALENCE.
514 EXIT SIGNS:
EXIT SIGNS SHALL HAVE AN INPUT POWER DEMAND OF 5 WATTS
OR LESS PER SIGN.
MEANS OF EGRESS ILLUMINATION (1 B.C. 1006)
All Means of Egress Ilumination shall conform to the 2009 I.B.C.
EXIT SIGNS (LB.C. 1011)
All Exit Signs shall conform
Chapter 10 Means of Egress.
with the 2009 I.B.C. Section 1011,
11�s'
EXIT SIGNS SHALL BE ILLUMINATED AT ALL
TIMES. TO ENSURE CONTINUED ILLUMINATION
FOR A DURIATION OF NOT LESS THAN W MIN.
THE SIGN ILLUMINATION SHALL BE CONNECTED
TO AN EMERGENCY POWER SYSTEM PROVIDED 13'
FROM STORAGE BATTERIES , UNIT EQUIPTMENT OR
AN ON -SITE GENERATOR. CCX5I9OGWOBKDH1W EXIT LITES
:AD \201.1111 -On ont metrlst OrtornetrIst 12- 07- 11..dwq, A -4 L.ightina, 12/7/2011 4:07:39 PM, \ \PLOTTER \RW -240WP
POWER SYMBOL LEGEND
SYMBOL
DESCRIPTION
V
icJ •
Q
0
()
0
PHONE
CAT 6 COMPUTER
RG9 COAX CABLE
DUPLEX OUTLET
DUPLEX OUTLET-
GROUND FAULT INTERRUPT
JUNCTION BOX
0 EQUIPMENT SCHEDULE (FURNISHED BY OWNER)
0
RELIANCE: MODEL 980 FULL -POWER EXAMINATION CHAIR
110 VOLTS, 60 Hz, 8.0 AMPS
HAAG- STREIT INTERNATIONAL: OCTOPUS 300 BASIC
100- 120VAC/2210- 240V4C 50/60 Hz
m „�,, PROPOSED LIGHTI.NG LAYOUT
NOTES:
RELOCATE EXISTING SPRINKLER HEADS TO PROVIDE COMPLETE
COVERAGE. CONTRACTOR TO .SUBMIT DRAWINGS TO LOCAL AUTHORITIES.,.
REPLACE EXISTING SPRINKLER HEADS WITH CONCEALED HEADS AND FLUSH
WHITE COVERS IN MAIN WAITING AREA, RECEPTION, AND OPTICAL.
PROVIDE STANDARD FLUSH HEADS IN ALL OTHER ROOMS AND HALLWAY.
OPROVIDE CADET WALL HEATER WITH THERMOSTAT.
20 AMP DEDICATED CIRCUIT,
NOT TO BE GFI
trA
0._+40.
REF. UNDER DEDICA E
+60
REMOVE EXISTING
WATER HEATER, REPLACE
WITH NEW 30 GALLON
HEATER WITH PLYWOOD
PLATFORM ABOVE
TOILET CEILING
OPTIC4L
JOB NUMBER'
T a T :•'::
+90 +90. +90
PROPOSED POWER AND DATA PLAN
SCALE' 1/4M-CP
OF.
2.
3.
4.
Suspended Ceilings
Suspended ceiling are_ to comply with following codes and regulations:
2009 International Building Code (IBC) Sections 803.9 and 1613.1.
ASTM C635 and ASTM C636 (referenced in IBC 803.9): ASTM is an acronym for American
Society for Testing and Materials:
ASCE -7 -05 Section 13.5.6:22 (referenced in IBC 1613.1). ASCE is an acronym for American Society
of Civil Engineers.
CISCA recommendations for seismic Zones 3 -4 (referenced in ASCE -7 -05 Section 13.5.622).
CISCA is an acronym for Ceiling & Interior Systems Construction Association.
IBC 102.1 states, "Where, in any specific case, different sections of this code specify different
materials, methods of construction or other requirements, the most restrictive shall govern. Where
there is a conflict between a general requirement and a specific requirement, the specific
requirement shall be applicable."
Partial listing of requirements for suspended ceilings:
a) ; Only a heavy duty T -Bar grid system shall be used ASCE -7 -05 Section 13.5.622 item a.
b) Width of the perimeter supporting closure angle (wall angle) shall be not less than 2.0
inches. ASCE -7 -05 Section 13.5.6.22, item b.
On two adjacent sides, the grid shall be attached to the wall angle. Pop rivets are
acceptable. On the other two sides, there shall be a 3 inch clearance between the ends of
the grid and the wall. ASCE -7 -05 Section 13.5.622, item b.
Stabilizer bars are required to prevent the spread of main beams and/or cross tees.
CISCA Guidelines for Seismic Restraint for Direct Hung Suspended Ceiling Assemblies,
Seismic Zones 3 & 4, May 2004, Installation Section, item 4.
Perimeter support (tail) wires are required within eight inches of the wall for all edges._
CISCA Guidelines for Seismic Restraint for Direct Hung Suspended Ceiling Assemblies,'
Seismic Zones 3 & 4, May 2004, Installation Section, item 2.
Vertical Hangers shall be No 12 gauge wire spaces at 4 feet on center or No 10 gage
spaced 5 feet on center along each main runner. Three wire turns required. Within
1:6 out -of -plumb unless counter - sloping wires are provided.
Lateral bracing is required: splay wire pods at 12' max. o.c. and 6' max. from walls.
CISCA Guidelines for Seismic Restraint for Direct Hung Suspended Ceiling Assemblies,
Seismic Design Groups D/3 & E /4, May 2004, Installation Section, item 3, ADCE 7 -02,
9.62.622, and City of Kent Policy require lateral bracing at all ceiling agreas greater than
144 S.F. surrounded by walls that connect directly to structure above:
h) Ceilings over 2500 square feet must have seismic separation joints or full height partition
that breaks the ceiling up into areas not exceeding 2500 square feet. ASCE -7 -05 Section
13.5.6.2.2, item d.
For ceilings without rigid bracing, sprinkler head and other penetrations hall have a 2 -
inch oversize ring, sleeve, or adaptor through the ceiling tile to allow for free movement
of at least 1- inch in all horizontal directions; or, sprinkler head extension to have a swing
joint that can accommodate 1 inch of ceiling movement in all horizontal directions.
ASCE -7 -05 Section 13.5.622, item e.
Changes in ceiling plan elevation shall be provided with positive bracing. ASCE -7 -05
Section 13.5.622, item f.
Cable trays and electrical conduits shall be supported independently of the ceiling. ASCE -7 -05
Section 13.5.6.2.2, item g.
c)
d)
e)
fl
g)
i)
j)
k)
EMT CONDUIT
1/2' EMT CONDUIT
UP TO 6' -0'
3/4' EMT CONDUIT
UP TO 8' -6'
1' EMT CONDUIT
UP T0101-0'
1 METAL STUD
1 -5/8' METAL STUD (25 GAGE)
UP TO 6' -2'
2 -1/2' METAL STUD (25 GAGE)
UP TO 10' -6'
NOTE: PLENUM AREAS GREATER THAN II' -0' WILL REQUIRE
ENGINEERING CALCULATIONS
MAXIMUM LENGTHS FOR
VERTICAL STRUCTS
-SCALE N.T.S.
11
FIRE
LARSON(OR APPROVED)
FIRE EXTINGUISHER CAB.
(2409 -6R) SURFACE MOUNTED
W /IO LB. AEC
FIRE CAB ELEVATION
5'a' GLOB EA SIDE
MTL FRAMING
J `l f� �� YE
\\\\\\\\\
VERIFY REQ'D ROUGH
OPENING 13'X28'
EXT. CAB
-5 SCALE
oit
1'•i' -o'
SPREADER BAR OR
OTHER SUITABLE
SYSTEM REQUIRED TO
KEEP PERIMETER
COMPONENTS FROM
SPREADING APART
PLUMB
I/6 r,
8' MAX.
HANGER D SUSPENSION WIRE
N.T.S.
T4P RELIEF VALVE
PIPE TO PAN
BELOW
SECURE TO WALL
WITH SEIZMIC STRAPS
3/4'
3/4'
HOT OUT
►t
COLD IN
�. EXPANSION TANK
GATE VALVE (TYP)
UNION (TYP)
NEW 30 GALLON
WATER HEATER
GALVANIZED DRAIN PAN
w� WATER HEATER PIPING DETAIL
MI NIMUM
45' ANGLE
MINIMUM
45' ANGLE
COUNTERSTOPPING
SCALE N.T.S.
ATTACHMENT FOR
FIXTURES LESS
THAN 56 LES
WITHIN CEILINGS
GREATER THAN 144 SF
ALL SUSPENDED
CEILNG LIGHTS ARE
REQUIRED TO HAVE
SEISMIC BRACING
WIRE IN 2 OPPOSITE
CORNERS (SEE
ISOMETRIC DETAIL AND
CEILNG NOTES)
SUSPENDED CEILNG
FIXTURE WIRE DETAIL
SCALE N.T.S.
VERTICAL HANGER WIRE ATTACHMENT
SHOT-IN ANCHOR
STRUCTURAL CONCRETE
CEILING CLIP
n
3 TURNS
VERTICAL HANGER WIRE
/8'
'A .1
VERTICAL HANDER
WIRE ATTACHMENT
SCALE N.T.S.
REVISIONS
<f)
te
uJ
6s70 SOUT C1 N
EMT CONDUIT OR
STUD, SEE CHART
THIS SHEET
12 GAGE PLAYED
BRACE WIRES
11111
RUNNER E'
1AI,N45.TE •
CROSS TEE
LATERAL FORCE BRACING
SCALE N.T.S.
WIRE ATTACHMENTS
SCALE N.T.S.
THREE TIGHT TURNS
WITHIN THREE INCHES.
12 GA WIRE SPACED
48' O.C.
WALL
SPREADER BAR OR
OTHER SUITABLE
SYSTEM REQUIRED TO
KEEP PERIMITER
COMPONENTS FROM
SPREADING APART
3/4' MIN. e
UNATTACHED WALLS
WALL MOLDING REQUIREMENTS
SCALE HT-0
5/16' DRILL -IN EXPANSION ; i]
ANCHOR MN.
STRUCTURAL COCN.
STEEL STRAP 1' WIDE x 2' LONG
x 12 GAGE MN.
3 TURNS
SPLAYED SEISMIC BRACING WIRE
•
REVIEWED FOR
CODE COMPLIANCE
APPROVED
DEC 16 2011
City of Tukwila
BUILDING DIVISION
t37b
l--
RECEIVED
CITY OF TUKWILA
Die 082011
PERMIT CENTER
SPLAYED SEISMIC
BRACING WIRE ATTACHMENT
SCALE N.T.S.
HONE: 253.939.3232
ARCHITECTS
PLANNERS
'AD \201.1 \1.1. -fl0 Optometrist \Optometrist i2- 07- 11.dwg, A -5 Ceiling Det, 12/7/2011 11:46:56 AM, \ \PLOTTER \RW -240WP
JOB NUMBER
DATE 11 -23 -211
SHEET A - 5
OF
REVISIONS.
NOTES
AT ACCESSIBLE TOILETS, A SIDEWALL VERTICAL GRAB BAR
IS REQUIRED THAT IS MINIMUM IN LENGTH, MOUNTED WITH THE
BOTTOM OF THE BAR LOCATED BETWEEN 39 INCHES AND
41 INCHES ABOVE THE FLOOR, AND WITH THE. CENTERLINE OF
THE BAR L OCAT ED B E T W EE N 39 INCHES AND 41 INCHES FROM
M
THE REAR WALL. ICC /ANSI 4111.1 -2003 SECTION 6045.1
AT ACCESSIBLE TOILETS, TOILET PAPER DISPENSERS SHALL
BE LOCATED 1 INCHES MINIMUM AND 9 INCHES MAXIMUM IN
FRONT OF THE TOILET MEASURED TO CENTERLINE OF
DISPENSER OUTLET SHALL BE 15 INCHES MINIMUM AND 48 INCHES
MAXIMUM ABOVE THE FLOOR, BUT NOT BEHIND GRAB BAR
DISPENSER SHALL NOT CONTROL DELIVERY AND SHALL
ALLOW CONTINUOUS PAPER FLOW. ICC /ANSI A111.1 -2003 SEC. 604.1
Q TOILET ELEVATION LEGEND
PAINT SEMI -GLOSS ENAMEL (S.G.E.)
TILE +66' AFF. (OPTIONAL NEW P -LAM WAINSCOT TO 454')
PRE- ASSEMBLED BORDER TILE (OPTIONAL METAL BEAD IF P -LAM)
TILE (OPTIONAL EXISTING 'SG TO REMAIN)
TILE BASE (OPTIONAL EXISTING VSG TO REMAIN)
WALLS WITHIN 2 FEET OF URINALS AND TOILETS SHALL HAVE A
SMOOTH, HARD, NON ABSORBENT SURFACE TO A HEIGHT OF
4 FEET ABOVE THE FLOOR. 2006 IBC 12102
TOILET AND BATHING ROOMS FLOORS SHALL HAVE A SMOOTH,
HARD, NONABSORBENT SURFACE THAT EXTENDS UPWARD ONTO
THE WALLS AT LEAST 6 INCHES. IBC 1210.1
UNDERGROUND PIPES TO BE EMBEDDED IN SAND OR PEA
GRAVEL AND PROPERLY SUPPORTED ON COMPACT FILL.
NO CONSTRUCTION DEBRIS ALLOWED. SEE 2006 UPC 315.4
ACCESSIBILITY NOTES
ALL NEW CONSTRUCTION TO COMPLY WITH THE 2009 IBC
WITH WASHINGTON STATE AMMENDMENTS UPDATED 01/0I/05
ALONG WITH AMERICAN NATIONAL STANDARD, ICC /ANSI A111.1 -2003
2. RESTROOMS:
A. FLOORING TO BE SLIP RESISTANT TILE.
B. LAYORITORIES TOP TO BE AT +34' FROM FINISHED
FLOOR. PROVIDE A MINIMUM OF 29' CLEAR
SPACE UNDERNEATH. PROTECT PLUMBING WITH
CONTINUOUS SCALD GUARDS.
C. GRAB BARS. OUTSIDE DIAMETER OF NOT LESS THAN 1 1/4'
NO MORE THAN 1 1/2'. BETWEEN GRAB BAR AND WALL
SHALL HAVE A CLEARANCE OF 1 1/2'.
TOP OF GRAB BARS MOUNTED 33' MIN. 36' MAX. AFF.
SIDE GRAB BARS: MIN. 42' IN LENGTH, MAX. 12' FROM REAR WALL.
REAR GRAB BARS: MIN. 36' IN LENGTH, EXTEND 12' BEYOND
THE CENTERLINE OF THE W.C. SIDE WALL AND 24' TO THE OPEN
SIDE OF THE W.C.
VERTICAL GRAB BARS: MIN. 18' IN LENGTT SHALL EXTEND 39' -41' FROM
BACK WALL. BOTTOM OF BAR SHALL BE LOCATED 39' -41' FROM FLOOR
D. WATER CLOSET SEAT TO BE BETWEEN 11'
AND 19' FROM FINISHED FLOOR
3. DOORS: ALL DOORS TO HAVE LEVER HANDLES, OR OTHER HANDICAP
ACCESSIBLE CONFIGURATION.
4. SWITCHES:
AS PER 2009 IB.C. WITH WASHINGTON STATE
AMMENDMENTS AND 2006 AMERICAN NATIONAL
STANDARDS. CONTROL SWICHES SHALL BE MOUNTED
32' TO 40' ABOVE THE FLOOR AND NOT LESS THAN
18' NOR MORE THAN 36' HORIZONTALLY FROM THE
NEAREST POINT OF TRAVEL OF THE MOVING DOORS.
CHAPTER -1. COMMUNICATIONS ELEMENETS AND FEATURES
101 GENERAL
101.1 SCOPE. COMMUNICATIONS ELEMENTS AND FEATURES.
REQUIRED TO BE ACCESSIBLE BY THE SCOPING PROVISIONS
ADOPTED BY THE ADMINISTRATIVE AUTHORITY SHALL
COMPLY WITH THE APPLICABLE PROVISIONS OF CHAPTER 1.
102 ALARMS
102.1 GENERALACCESSIBLE AUDIBLE AND VISUAL .
ALARMS AND NOTIFICATION APPLIANCES SHALL BE INSTALLED
IN ACCORDANCE WITH NFPA 12 LISTED IN SECTION
10522, BE POWERED BY A COMMERCIAL LIGHT AND POWER
SOURCE, BE PERMANENTLY CONNECTED TO THE WIRING
OF THE PREMISES ELECTRIC SYSTEM, AND BE PERMAMENTLY
INSTALLED.
103 SIGNS
103.1 GENERALACCESSIBLE SIGNS SHALL COMPLY WITH
SECTION 103.
103. VISUAL CHARACTERS
1032.1 GENERAL. VISUAL CHARACTERS SHALL COMPLY
WITH SECTION 1032
EXCEPTION: VISUAL CHARACTERS COMPLYING
WITH SECTION 103.3 SHALL NOT BE REQUIRED TO
COMPLY WITH SECTION 1032.
10322 CASE. CHARACTERS SHALL BE UPPERCASE,
LOWERCASE, OR A COMBINATION OF BOTH.
1032.3 STYLE. CHARACTERS SHALL BE CONVENTIONAL
IN FORM. CHARACTERS SHALL NOT BE ITALIC, OBLIQUE,
SCRIPT, HIGHLY DECORATIVE, OR OF OTHER UNUSUAL
FORMS.
1032.4 CHARACTER HEIGHT. THE UPPERCASE LETTER
'I' OF THE FONT SHALL HAVE A MINIMUM HEIGHT
COMPLYING WITH TABLE 1032.4. VIEWING DISTANCE
SHALL BE MEASURED AS THE HORZONTAL DISTANCE
BETWEEN THE CHARACTER AND AN OBSTRUCTION PREVENTING
FURTHER APPROACH TOWARDS THE SIGN.
103.2.5 CHARACTER WIDTH. THE UPPERCASE LETTER
'0' SHALL BE USED TO DETERMINE THE ALLOWABLE
WIDTH OF ALL CHARACTERS OF A FONT. THE WIDTH OF THE
UPPERCASE LETTER '0' OF TI-IE FONT SHALL BE 55 PERCENT
MINIMUM AND 110 PERCENT MAXIMUM OF THE HEIGHT
OF THE UPPERCASE 'I' OF THE FONT.
TOP OF GRAB BARS MOUNTED
33' MIN, 36' MAX. AFF.
SIDE GRAB BARS: MIN. 42' IN LENGTH LOCATED
MAX. 12' FROM REAR WALL.
REAR GRAB BARS: MIN. 36' IN LENGTH SHALL
EXTEND 12' BEYOND THE et OF THE W.G. TOWARD THE
SIDE WALL AND 24' TO THE OPEN SIDE OF THE W.C.
VERTICAL GRAB BARS: MIN. IS' IN LENGTH SHALL
EXTEND 39' -41' FROM BACK WALL. BOTTOM OF BAR
SHALL BE LOCATED 39' -41' FROM FLOOR
TOP OF WATER CLOSET SEAT
11' MIN, 19' MAX. AFF.
MOUNT CENTERLINE OF W.C. 18' MIN
FROM ADJACENT WALL.
CONTINUOUS CAULK
TOP OF LAVATORY MOUNT MAX. 34' AFF.
30' MIN. WIDE, 29' MIN. HIGH, AND 11' DEEP
(6' OF WHICH MAY BE TOE CLEARANCE)
UNDERNEATH FOR KNEE CLEARANCE.
LEVER HANDLE FAUCETS LOCATED MAX. 11'
FROM T HE FRONT EDGE OF THE LAVATORY.
MOUNT CENTERLINE OF FAUCET 18' MIN
FROM ADJACENT WALL.
DRAINPIPES UNDER LAVATORIES AND SINKS
SHALL BE INSULATED OR OTHERWISE CONFIGURED
TO PROTECT AGAINST CONTACT.
(PER SECTION 606.6 ICC /ANSI A111.1 -2003)
Ei:::::i>EiP,aai39Eamamaaaiiit
��� � ,ten■
® 4
O -f--
:
iirgioq
MEW
viImggmnnu mmmmummm;mwllnu m n
9111 ■
■ l
■ ■9■.. ■
1l
•uumu _
1
Ak
NEW S.5. SEAT COVER DISPENSER
MOUNT MAX. 40' AFF.
O 12 NEW 5.S.TOILET PAPER DISPENSER MOUNT 8' IN FRONT OF TOILET EDGE,
20' ABOVE FINISH FLOOR
0 NEW S.S. SOAP DISPENSER, OPERATING CONTROL
MOUNT MAX. 40' AFF.
IA NEW SS. PAPER TOWEL DISPENSER
MOUNT MAX. 40' AFF.
CRATE 1 BARREL 'BRIGHTON COFFEE WALL
MIRROR'. 26'WxI5'Dx31'N. MOUNT BOTTOM OF
MIRROR MAX. 40' AFF.
GF
TOILET
•
NEW SCALD
GUARD UNDER
SINK
iii ■
PE 1 RI•1•lrAPW■
A
RELOCATED SINK
NEW VERTICAL
GRAB BAR
TOILET
:: n :::mmm:: ;:zmm8
BM
I liti
iI1ki
11* .
TOILET ELEVATIONS
SCALE va.w•
®4Q
24'
36'
60'
0 OTHER FIXTURE
PERMITTED IN
THIS SPACE
C
4
a 9E?ec!ii?!ll!Et
TOILET
Lk
■
TOILET
TABLE 606.7
MAXIMUM REACH DEPTH AND HEIGHT
MAXIMUM
REACH DEPTH
'
" '
6"
"
11'
MAXIMUM
REACH HEIGHT
48"
46'
42"
40"
36"
34"
1035 PICTOGRAMS,
103.5.1 GENERAL. PICTOGRAMS SHALL COMPLY WITH
SECTION 103.5.
103.52 PICTOGRAM FIEL. PICTOGRAMS SHALL
HAVE A FIELD 6 INCHES (150 MM) MINIMUM IN
HEIGHT. CHARACTERS OR BRAILLE SHALL NOT
BE LOCATED IN THE PICTOGRAM FIELD.
103.53 FINISH AN CONTRAST.
PICTOGRAMS AND
THEIR FIELDS SHALL HAVE A NONGLARE FINISH.
ICT MS
P OGRA SHALL CONTRAST WITH -THIER FIELDS,..
WITH EITHER A LIGHT PICTOGRAM ON A DARK
FIELD OR A DARK PICTOGRAM ON A LIGHT FIELD.
1035.4 TEXT DESCRIPTORS, WHERE TEXT
DESCRIPTORS FOR PICTOGRAMS ARE REQUIRED,
THEY SHALL BE LOCATED DIRECTLY BELOW
THE PICTOGRAM FIELD. TEXT DESCRIPTORS
SHALL COMPLY WITH SECTIONS 1033 AND
103.4.
103b SYMBOLS AND ACCESSIBILITY,
103.6.1 GENERAL. SYMBOLS OF ACCESSIBILITY SHALL
COMPLY WITH SECTION 103 .6.
103.62 FINISH AND CONTRAST, SYMBOLS OF
ACCESSIBILITY AND THIER BACKGROUNDS SHALL
HAVE A NONGLARE FINISH. SYMBOLS OF ACCESSIBILITY
CHALL CONTRAST WITH THIER BACKGROUNDS, WITH EITHER
A LIGHT SYMBOL ON A DARK BACKGROUND OR A DARK
SYMBOL ON A LIGHT BACKGROUND.
103.63 SYMBOLS,
103.63.1 INTERNATIONAL SYMBOL OF ACCESSIBILTY
ACCESSIBILITY. THE INTERNATIONAL SYMBOL
OF ACCESSIBILITY SHALL COMPLY WITH FIGURE
103 .63.1.
103.632 INTERNATIONAL SYMBOL OF TTY,
THE INTERNATIONAL SYMBOL OF TTY SHALL
COMPLY WITH FIGURE 103.632:
103.633 ASSISTIVE LISTENING SYSTEMS.
ASSISTIVE LISTENING SYSTEMS SHALL BE IDENTIFIED
BY THE INTERNATIONAL SYMBOL OF ACCESS FOR
HEARING: LOSS COMPLYING WITH FIGURE 103.63.3.
103.63.4 VOLUME- CONTROLLED TELEPHONES,
TELEPHONES WITH VOLUME CONTROLS SHALL
BE IDENTIFIED BY A PICTOGRAM OF A TELEPHONE
HANDSET WIN RADIATING SOUND WAVES ON A
SQUARE FIELD COMPLYING WITH FIGURE 103 .63.4.
TOILET
•••
• •
NOTE:
PROVIDE CORRECT PICTOGRAM,
TEXT DESCRIPTION, AND BRAILE
AT WOMEN'S TOILETS
NOTE:
ALL INTERIOR AND EXTERIOR
SIGNS DEPICTING THE THE
INTERNATIONAL SYMBOL
OF ACCESSIBILITY SHALL BE
WHITE ON A BLUE BACKGROUND.
FIG. 103.5
PICTOGRAM FIELD
FIG. 103 .63.1
INTERNATIONAL SYMBOL OF
ACCESSIBILITY
NOT£:
PICTOGRAMS FOR TOILETS, TEXT
DESCRIPTIONS, BRAILE, AND THE
INTERNATIONAL SYMBOL OF
ACCESSIBILITY SHALL BE PLACED AT
ALL TOILETS ALONG THE ACCESSIBLE
ROUTE OF TRAVEL.
MOUNT PER FIGURES 1033.10 AND 1033.11
1032.6 STROKE WIDTH. THE UPPERCASE LETTER 'I'
SHALL BE USED TO DETERMINE NE ALLOWABLE STROKE
WIDTH OF ALL CHARACTERS OF A FONT. THE STROKE WIDTH
514ALL BE 10 PERCENT MINIMUM AND 30 PERCENT
MAXIMUM OF THE HEIGHT OF THE UPPERCASE 'I' OF
NE FONT.
103.2.1 CHARACTER SPACING. SPACING SHALL BE
MEASURED BETWEEN THE TWO CLOSEST POINTS OF
ADJACENT CHARACTERS WITHIN A MESSAGE, EXCLUDING
WORD SPACES. SPACING BETWEEN INDIVIDUAL
CHARACTERS SHALL BE 10 PERCENT MINIMUM AND 35
PERCENT MAXIMUM OF THE CHARACTER HEIGHT.
1032.8 LINE SPACING. SPACING BETWEEN THE
BASELINE OF SEPARATE LINES OF CHARACTERS WITHIN
A MESSAGE SHALL BE 135 PERCENT MINIMUM TO
110 PERCENT MAXIMUM OF THE CHARACTER HEIGHT.
10329 HEIGHT ABOVE FLOOR. VISUAL CHARACTERS
SHALL BE 40 INCHES (1015 MM) MINIMUM ABOVE
THE FLOOR OF THE VIEWING POSITION, MEASURED TO
THE BASELINE OF THE CHARACTER HEIGHTS SHALL
COMPLY WITH TABLE 10314, BASED ON THE SIZE OF
THE CHARACTERS ON THE SIGN.
EXCEPTION: VISUAL CHARACTERS INDICATING
ELEVATOR CAR CONTROLS SHALL NOT BE REQUIRED TO
COMPLY WITH SECTION 1032.9.
1032.10 FINISH AND CONTRAST. CHARACTERS AND
THEIR BACKGROUND SHALL HAVE A NONGLARE FINISH.
CHARACTERS SHALL CONTRAST WITH THEIR BACKGROUND,
WITH EITHER LIGHT CHARACTERS ON A DARK
BACKGROUND, OR DARK CHARACTERS ON A LIGHT
BACKGROUND.
1033 TACTILE CHARACTERS,
1033.1 GENERAL. TACTILE CHARACTERS SHALL
COMPLY WITH SECTION 1033, AND SHALL BE
DUPLICATED IN BRAILLE COMPLYING WITH SECTION
103.4.
10332 DEPTH. TACTILE CHARACTERS SHALL BE
RAISED 1/32 INCH (0B MM) MINIMUM ABOVE THEIR
BACKGROUND.
10333 CASE. CHARACTERS SHALL BE UPPERCASE.
103.3.4 STYLE. CHARACTERS SHALL BE SANS SERIF.
CHARACTERS SHALL NOT BE ITALIC, OBLIQUE, SCRIPT,
HIGHLY DECORATIVE, OR OF OTHER UNUSUAL FORMS.
'AD \201.1 \11 -00 Ontnrnetrist \Optometrist 12- 07- 11.dwg, A -6 Toilet -ANSI, 12/7/2011 4:08:23 PM, \ \PLOTTER \RW -240WP
10335 CHARACTER HEIGHT. NE UPPERCASE LETTER
'1' SHALL BE USED TO DETERMINE THE ALLOWABLE
HEIGHT OF ALL CHARACTERS OF A FONT. THE HEIGHT OF.
THE UPPERCASE LETTER 'I' OF THE FONT, MEASURED
VERTICALLY FROM HTE BASELINE OF THE CHARACTER,
SHALL BE 5/8 INCH (16 MM) MINIMUM, AND 2 INCHES
(51 MM) MAXIMUM.
EXCEPTION: WHERE SEPARATE TACTILE AND
VISUAL CHARACTERS WITH THE SAME INFORMATION
ARE PROVIDED, THE HEIGHT OF THE TACTILE
UPPERCASE LETTER 'I' SHALL BE PERMITTED TO
BE 1/2 INCH (13 MM) MINIMUM.
FIG. 1033.5
CHARACTER HEIGHT
1033.6 CHARACTER WIDTH. THE UPPERCASE LETTER
'0' SHALL BE USED TO DETERMINE THE ALLOWABLE
WIDTH OF ALL CHARACTERS OF A FONT. THE WIDTH
OF THE UPPERCASE LETTER '0' OF THE FONT SHALL
BE 55 PERCENT MINIMUM AND 110 PERCENT MAXIMUM
OF THE HEIGHT OF THE UPPERCASE 'I' OF NE FONT.
103.3.1 STROKE WIDTH, TACTILE CHARACTER STROKE
WIDTH SHALL COMPLY WITH SECTION 103.3.1. THE
UPPERCASE LETTER '1' OF THE FONT SHALL BE USED
TO DETERMINE THE ALLOWABLE STROKE WIDTH OF ALL
CHARACTERS OF A FONT.
1033.1.1 MAXIMUM. THE STROKE WIDTH
SHALL BE 15 PERCENT MAXIMUM OF THE HEIGHT
OF THE UPPERCASE LETTER 'I' MEASURED AT THE
TOP SURFACE OF THE CHARACTER, AND 30 PERCENT
MAXIMUM OF THE HEIGHT OF THE UPPERCASE LETTER
'I' MEASURED AT THE BASED OF THE CHARACTER
1033.12 MINIMUM, WHEN CHARACTERS ARE BOTH
VISUAL AND TACTILE, THE STROKE WIDTH SHALL
BE 10 PERCENT MINIMUM OF THE HEIGHT OF THE
UPPERCASE LETTER 'I'.
1033.8 CHARACTER SPACING. CHARACTER SPACING
SHALL BE MEASURE BETWEEN THE TWO CLOSEST
POINTS OF ADJACENT TACTILE CHARACTERS WITHIN 4
MESSAGE, EXCLUDING WORD SPACES. SPACING
BETWEEN INDIVIDUAL TACTILE CHARACTER SHALL BE 1/8
INCH (3.2 MM) MINIMUM MEASURED AT THE TOP
SURFACE OF THE CHARACTERS, 1/16 INCH (1.6 MM)
MINIMUM MEASURED AT THE BASE OF THE CHARACTERS,
AND FOUR TIMES THE TACTILE CHARACTER STROKE
WIDTH MAXIMUM. CHARACTERS SHALL BE SEPARATED
FROM RAISED BORDERS AND DECORATIVE ELEMENTS
3/8 INCH (95 MM) MINIMUM.
TABLE 1032.4 - VISUAL CHARACTER HEIGHT
HEIGHT ABOVE FLOOR TO
BASELINE OF CHARACTER
HORIZONTAL VIEWING DISTANCE
MINIMUM CHARACTER HEIGHT
LESS THAN 6 FEET (183011M)
5/8 INCH (16 MM)
40 INCHES (1015 MM) TO LESS THAN
OR EQUAL TO 10 INCHES (1180 MM)
6 FEET (1830 MM) AND GREATER
5/8 INCH (16 MM) , PLUS 1/8 INCH
(32 MM) PER FOOT (305 MM) OF
VIEWING DISTANCE ABOVE 6 FEET
(18301111)
10339 LINE SPACING, SPACING BETWEEN THE
BASELINES OF SEPARATE LINES OF TACTILE CHARACTERS
WITHIN ,4 MESSAGE SHALL BE 135 PERCENT MINIMUM
AND 110 PERCENT MAXIMUM OF THE TACTILE
CHARACTER HEIGHT.
103.3.10 HEIGHT ABOVE FLOOR TACTILE
CHARACTERS SHALL BE 48 INCHES (1220 MM)
MINIMUM ABOVE THE FLOOR, MEASURED TO THE
BASELINE OF THE LOWEST TACTILE CHARACTER
AND 60 INCHES (1525 MM) MAXIMUM ABOVE THE
FLOOR, MEASURED TO THE BASELINE OF THE
HIGHEST TACTILE CHARACTER
EXCEPTION: TACTILE CHARACTERS FOR ELEVATOR
CAR CONTROLS SHALL NOT BE REQUIRED TO COMPLY
WITH SECTION 1033.10.
1033.11 LOCATION, WHERE A TACTILE SIGN IS
PROVIDED AT A DORR, THE SIGN SHALL BE ALONGSIDE
THE DOOR AT THE LATCH SIDE. WHERE A TACTILE
SIGN IS PROVIDED AT DOUBLE DOORS WITH ONE
ACTIVE LEAF, THE SIGN SHALL BE LOCATED ON THE
INACTIVE LEAF. UMERE A TACTILE SIGN IS PROVIDED
AT DOUBLE DOORS WITH TWO ACTIVE LEAVES, THE
SIGN SHALL BE TO THE RIGHT OF THE RIGHT -HAND
POOR WHERE THERE IS NO WALL SPACE ON THE
LATCH SIDE OF A SINGLE DOOR, OR TO THE
RIGHT SIDE OF DOUBLE DOORS, SIGNS SHALL
BE ON THE NEAREST ADJACENT WALL. SIGNS
CONTAINING TACTILE CHARACTERS SHALL BE
LOCATED 50 THAT A CLEAR FLOOR AREA
18 INCHES (455 MM) MINIMUM BY 18
INCHES (455 MM) MINIMUM, CENTERED ON THE
TACTILE CHARACTERS, IS PROVIDED BEYOND
THE ARC OF ANY DOOR SWING BETWEEN THE CLOSED
POSITION AND 45 DEGREE OPEN POSITION.
EXCEPTION: SIGNS WITH TACTILE CHARACTERS
SHALL BE PERMITTED ON THE PUSH SIDE OF DOORS
WITH CLOSERS AND WITHOUT HOLD -OPEN DEVICES.
1033.12 FINISH AND CONTRAST. CHARACTERS AND
THIER BACKGROUND SHALL HAVE A NONGLARE FINISH.
CHARACTERS SHALL CONTRAST WITH THIER BACKGROUND
WITH EITHER LIGHT CHARACTERS ON A DARK BACKGROUND
OR DARK CHARACTERS ON A LIGHT BACKGROUND.
EXCEPTION: WHERE SEPARATE TACTILE CHARACTERS
AND VISUAL CHARACTERS WITH THE SAME INFORMATION
ARE PROVIDED, TACTILE CHARACTERS ARE NOT
REQUIRED TO HAVE NONGLARE FINISH OR TO
CONTRAST WITH THEIR BACKGROUND.
103.4 BRAILLE,
103.4] GENERAL. BRAILLE SHALL BE CONTRACTED
(GRADE 2) BRAILLE AND SHALL COMPLY WITH SECTION
103.4.
TABLE 103.43.
103.4.4 POSITION BRAILLE SHALL BE BELOW THE
CORRESPONDING TEXT. IF TEXT IS MULTILINED, BRAILLE
SHALL BE PLACED BELOW ENTIRE TEXT. BRAILLE SHALL
BE SEPARATED 3/8 INCH (95 1111) MINIMUM FROM ANY
OTHER TACTILE CHARACTERS AND 3/8 INCH (95 111)
MINIMUM FROM RAISED BORDERS AND DECORATIVE
ELEMENTS. BRAILLE PROVIDED ON ELEVATOR CAR
CONTROLS SHALL BE SEPARATED 3/16 INCH (4.8 MM)
MINIMUM EITHER DIRECTLY BELOW OR ADJACENT TO THE
CORRESPONDING RAISED CHARACTERS OR SYMBOLS.
103.42 UPPERCASE LETTERS. THE INDICATION OF AN
UPPERCASE LETTER OR LETTERS SHALL ONLY BE USED
BEFORE THE FIRST WORK OF SENTENCES, PROPER NOUNS
AND NAMES, INDIVIDUAL LETTERS OF THE ALPHABET;
INITIALS, OR ACRONYMS.
suomismoommosmana
REVIEWED FOR
CODE COMPLIANCE
APPROVED
103.43 DIMENSIONS. BRAILLE DOTS SHALL HAVE A
DOMED OR ROUNDED SHAPE AND SHALL COMPLY WITH
FIG. 1033.10
HEIGHT OF TACTILE CHARACTERS ABOVE FLOOR OR GROUND
NOTE : FOR BRAILE MOUNTING HEIGHT SEE SECTION 103.4.5
._'• • b
h'•rLu••
FIG. 103.4.4
POSITION OF BRAILLE
103.45 MOUNTING HEIGHT BRAILLE SHALL BE 48 INCHES
(1220 MM) MINIMUM AND 60 INCHES (I525 MM) MAXIMUM
ABOVE NE FLOOR, MEASURED TO THE BASELINE OF
THE BRIALLE CELLS.
EXCEPTION: ELEVATOR CAR CONTROLS SHALL
NOT BE REQUIRED TO COMPLY WITH SECTION
103.45.
RECEIVED
le MIN'ITV OF TUKWILA
/455
litU 0 8 2011
PERMIT CENTER
JOB NUMBER'
FIG. 1033.11
LOCATION OF TACTILE SIGNS AT DOORS
DATE 11 -23 -2011
SHEET A.-
8
LOCATE SWITCHES
ON BACK WALL
36' 48'
EXAM ROOM
SCALE 1149-t09
PULL -OUT DRAWER,
CLOSED BACK
16 -3/4' VERIFY
16.15' JOB VERIFY
18' 18' 16' 24.15'
O I ® iA zo
O J`L 1-):: .( REFoA I/ N
O IS' Elneell 4
16 -3/4' J. RIFY
BREAK ROOM
SCALE. 1/494.09
18'
POST
SUPPORT
UNDER--
•
30'
+34'
22'
30'
CONTACTS
SCALE. 1/4•■109
DOUBLE
HINGED,
CORNER
DOOR
4'
LAB
SCALE. 1/4' -140'
22.15' 22.15' 22' 14'
REFRESHMENTS
SCALE. vrwa
455' I,121 I, 24'
a
LED MR16 LIGHT
r�
1 L
5y,
/ /
1' -9'
'5 /4x TRIM 54V
PAINT
�1/2x6 TRIM S4V
NICHE, PAINT ACCENT "1
(/2 x 4 CHAIR RAIL S4V
1/2x6 TRIMS4V
5y'
,/
PAINT ACCENT "2
BELOW CHAIR RAIL
FLOOR BASE PER PLAN
ART NICHE (3 Locations)
SCALE 1/2• ■ r-ot
2
24'
24'
84'
16.15'
EQ.
EQ. EQ.
EQ.
-7-
24'
36.15'
16'
UJORK DESK
DR. OFFICE
SCALES 1/4'4.0'
CURVED LIGHT
VALENCE
SUSPENDED ACOUSTICAL TILE 6 +12'
T- N4NT
SI NAG
LIGHT PENDANTS
PER PLAN
CUSTOM SHOWCASE
GLASSES DISPLAY
32' LED LCD DISPLAY,
TILT DOWN WALL MOUNT.
PROVIDE BACKING FOR MOUNT.
VITAMINS DISPLAY
CUSTOM DISPLAY
CASE
LAMINATED TEMPERED
FROSTED TOP -�
T
REFRESHMENTS
BEYOND
RECEPTION ELEVATION
SCALE' 1/49■1-09
M
FULL - HEIGHT CABINETS
OCABINET ELEVATION LEGEND
OPLASTIC LAMINATE FACE WINSONART WITH MELAMINE INTERIORS
LAMINATE BACK SPLASH FULL HEIGHT
ADJUSTABLE SHELVES
S.S. GOOSENECK SINK, WRISTBLADE LEVER CONTROLS
4' RUBBER BASE
PLASTIC LAMINATE COUNTER TOP WINSONART
4' SPLASH
V NO CABINET BASE FOR ACCESSIBILITY, SCALD GUARD AT DRAIN PIPES
FIXED SHELF
10 314, PLASTIC ESCUTCHEON FOR ELECT CORDS
BUILT -IN FILE CABINETS
SOAP DISPENSER, OPERATING CONTROL MOUNT MAX. 40' APP.
00 PAPER TOWEL DISPENSER MOUNT MAX. 40' APP.
PULL -OUT KEYBOARD DRAWER
LOCKABLE CABINETS
86'
68'
/ 18' .
86'
REVISIONS
re
cG
ILJ 0
z
ce
Q_.
1-"-h EQ. EQ.
< <
Z
\ EP L.)
em I''... h?
N
l''.
Zn
N `1
OFFICE
SCALES 1/49-1-0•
SUSPENDED ACOUSTICAL TILE * +12'
LED STRIP CONTINUOUS
AROUND LIGHT VALENCE
32' LED LCD DISPLAY,
/ TILT DOWN WALL MOUNT.
PROVIDE BACKING FOR MOUNT.
I6' 16'
pll -37(0
WALL SCONCES
(3) MR16 DOWNL IGHTS
ri
-r7
.7
7
r'i r
(3) MR16 DOWNLIGHTS
r7.
ADJUSTABLE GLASS SHELVES
WITH CHROME CLIPS
MIRRORS
r'
r
(5 VERTI
G SSES
r�
L MO tTED
ISPLA RODS
d
NN.
�/ - -\
..
- -��
7
N.
r
/
= - -=
=
/ I' -3' 1' -3'
%/; 2' -6'
1' -3' 1' -3'
2' -6'
I' -4'
1' -6'
1' -6'
1' -6'
1' -6'
3' -0'
3' -0'
1' -4'
/
1' -3'
I' -3'
1' -3'
1' -3'
2' -6'
2' -6'
EAST WALL ELEVATION
SCALE 1/
4%4'
/ /
RECEIVED
CITY OF TUKWILA
like 0 8 2011
PERMIT CENTER
'AD12011 \i 1 -00 Ontomotrist \Optometrist 12- 07- 11.dwa. A -7 Cabs, 12/7/2011 11:47:27 AM. \ \PLOTTER \RW -240WP
870 5OUT CLNT1 K 1KWY
z
z
N Z
4�
an
N
W
z
sz•
ARCHITECTS
PLANNERS
JOB. NUMBER'
DATE 11 -23 -2011
SHEET A-7
OF
8
d`,
1:I\
\
\
/
—
/
/
/
/
/
WALL SCONCES
(3) MR16 DOWNL IGHTS
ri
-r7
.7
7
r'i r
(3) MR16 DOWNLIGHTS
r7.
ADJUSTABLE GLASS SHELVES
WITH CHROME CLIPS
MIRRORS
r'
r
(5 VERTI
G SSES
r�
L MO tTED
ISPLA RODS
d
NN.
�/ - -\
..
- -��
7
N.
r
/
= - -=
=
/ I' -3' 1' -3'
%/; 2' -6'
1' -3' 1' -3'
2' -6'
I' -4'
1' -6'
1' -6'
1' -6'
1' -6'
3' -0'
3' -0'
1' -4'
/
1' -3'
I' -3'
1' -3'
1' -3'
2' -6'
2' -6'
EAST WALL ELEVATION
SCALE 1/
4%4'
/ /
RECEIVED
CITY OF TUKWILA
like 0 8 2011
PERMIT CENTER
'AD12011 \i 1 -00 Ontomotrist \Optometrist 12- 07- 11.dwa. A -7 Cabs, 12/7/2011 11:47:27 AM. \ \PLOTTER \RW -240WP
870 5OUT CLNT1 K 1KWY
z
z
N Z
4�
an
N
W
z
sz•
ARCHITECTS
PLANNERS
JOB. NUMBER'
DATE 11 -23 -2011
SHEET A-7
OF
8
?� •. -LED MRI6
i ADJUSTABLE TEMPERED
i GLASS SHELVES
LOCKABLE TEMPERED
Al GLASS DOOR
l O
-riage
TEMPERED GLASS
DISPLAY CASE
WIN ADJ. SHELVES
TEMPERED GLASS
►42'\ (TEMPERED CASE
WITH ADJ. SHELVES
IMMOVABLE
SKIRT
BOARD
OCABINET ELEVATION LEGEND
O PLASTIC LAMINATE FACE WINSONART WITH MELAMINE INTERIORS
O LAMINATE BACK SPLASH FULL HEIGHT
O ADJUSTABLE SHELVES
O SS: GOOSENECK SINK, WRISTBLADE LEVER CONTROLS
O4' RUBBER BASE
REVISIONS.
PLASTIC LAMINATE COUNTER TOP WINSONART
O 4' SPLASH
Q NO CABINET BASE FOR ACCESSIBILITY, SCALD GUARD AT DRAIN PIPES
FIXED SHELF
31+ PLASTIC ESCUTCHEON FOR ELECT CORDS
It BUILT -IN FILE CABINETS
® SOAP DISPENSER, OPERATING CONTROL MOUNT MAX. 40' A,F.F.
® PAPER TOWEL DISPENSER MOUNT MAX. 40' A.F.F.
14 PULL -OUT KEYBOARD DRAWER
® LOCKABLE CABINETS
CHECK -OUT
VITAMINS DISPLAY
BOX
v4• -ro'
RECEPTION
SCALE.
1/4%1 0'
REVIEWED FOR
CODE COMPLIANCE
APPROVED
DEC 1 6 2011
City of Tukwila
BUILDING DIVISION
JOB NUMBER.
DATE 11 -23 -2011
RECEIVED
CITY OF TI IOW LA
DEC 082011
PERMIT CENTER
:AD\ 2011 \11 -00 O tometrist \ODtometrist 12- 07- 11.dwci. A -8 Cabs, 12/7/2011 11:47:41 AM, \ \PLOTTER \RW -240WP