HomeMy WebLinkAboutPermit M11-179 - WESTFIELD SOUTHCENTER MALL - VANSVANS
811 S OUThCENTER MALL
EXPIRED 09 -12 -12
Mi 1 -179
City olkukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206431 -3670
Inspection Request Line: 206- 431 -2451
Web site: http: / /www.TukwilaWA.gov
MECHANICAL PERMIT
Parcel No.: 9202470010
Address: 811 SOUTHCENTER MALL TUKW
Project Name: VANS
Permit Number: M11 -179
Issue Date: 02/21/2012
Permit Expires On: 08/19/2012
Owner:
Name: WESTFIELD PROPERTY TAX DEPT
Address: PO BOX 130940 , CARLSBAD CA 92013
Contact Person:
Name: JOHN HENRY IV
Address: 15640 N 7 ST, SUITE B9 , PHOENIX AZ 85022
Email: JOHN @PLEGERHENRY.COM
Contractor:
Name: ALTERNATIVE MECHANICAL LLC
Address: 22129 NE 114TH ST , REDMOND WA 98053
Contractor License No: ALTERML901KQ
Phone: 602 - 293 -3300
Phone: (425)221 -1163
Expiration Date: 05/18/2012
DESCRIPTION OF WORK:
TENANT IMPROVEMENT: DUCTWORK, NEW DIFFUSERS, NEW THERMOSTAT FOR TENANT FIT -OUT
Value of Mechanical: $15,000.00
Type of Fire Protection: UNKNOWN
Electrical Service Provided by:
Permit Center Authorized Signature:
Fees Collected: $367.31
International Mechanical Code Edition: 2009
Date: ())-7 I
I hereby certify that I have read and examined this permit and know the same to be true and correct. All provisions of law and ordinances
governing this work will be complied with, whether specified herein or not.
The granting of this permit does not presume to give authority to violate or cancel the provisions of any other state or local laws regulating
construction or the performance of work. I am authorized to sign and obtain this mechanical permit and agree to the conditions on the
back of this permit.
Signatur
Print Name: .-_
This permit shall become null and void if the work is not commenced within 180 days from the date of issuance, or if the work is suspended
or abandoned for a period of 180 days from the last inspection.
Date:
doc: IMC -4/10
M11-179 Printed: 02 -21 -2012
• •
PERMIT CONDITIONS
Permit No. M11-179
1: ** *BUILDING DEPARTMENT CONDITIONS * **
2: No changes shall be made to the approved plans unless approved by the design professional in responsible charge and the
Building Official.
3: All mechanical work shall be inspected and approved under a separate permit issued by the City of Tukwila Permit Center
(206/431 - 3670).
4: All permits, inspection records, and approved plans shall be at the job site and available to the inspectors prior to
start of any construction. These documents shall be maintained and made available until final inspection approval is
granted.
5: Readily accessible access to roof mounted equipment is required.
6: All construction shall be done in conformance with the approved plans and the requirements of the International
Building Code or International Residential Code, International Mechanical Code, Washington State Energy Code.
7: Remove all demolition rubble and loose miscellaneous material from lot or parcel of ground, properly cap the sanitary
sewer connections, and properly fill or otherwise protect all basements, cellars, septic tanks, wells, and other
excavations. Final inspection approval will be determined by the building inspector based on satisfactory completion of
this requirement.
8: Manufacturers installation instructions shall be available on the job site at the time of inspection.
9: All plumbing and gas piping work shall be inspected and approved under a separate permit issued by the City of Tukwila
Building Department (206- 431- 3670).
10: All electrical work shall be inspected and approved under a separate permit issued by the City of Tukwila Building
Department (206- 431- 3670).
11: VALIDITY OF PERMIT: The issuance or granting of a permit shall not be construed to be a permit for, or an approval of,
any violation of any of the provisions of the building code or of any other ordinances of the City of Tukwila. Permits
presuming to give authority to violate or cancel the provisions of the code or other ordinances of the City of Tukwila
shall not be valid. The issuance of a permit based on construction documents and other data shall not prevent the
Building Official from requiring the correction of errors in the construction documents and other data.
12: ** *FIRE DEPARTMENT CONDITIONS * **
13: The attached set of building plans have been reviewed by the Fire Prevention Bureau and are acceptable with the
following concerns:
14: H.V.A.C. units rated at greater than 2,000 cfm require auto - shutdown devices. These devices shall be separately zoned
in the alarm panel and local U.L. central station supervision is required. (City Ordinance #2051)
15: H.V.A.C. systems supplying air in excess of 2,000 cubic feet per minute to enclosed spaces within buildings shall be
equipped with an automatic shutoff. Automatic shutoff shall be accomplished by interrupting the power source of the
air- moving equipment upon detection of smoke in the main return-air duct served by such equipment. Smoke detectors
shall be labeled by an approved agency for air -duct installation and shall be installed in accordance with the
manufacturer's installation instructions. (IMC 606.1, 606.2.1)
16: Remote indicator lights are required on all above ceiling smoke detectors. (City Ordinance #2051)
17: Duct smoke detectors shall be capable of being reset from a single point near the alarm panel. (City Ordinance #2051)
18: Duct detectors shall send a supervisory signal only upon activation. (City Ordinance #2051)
19: All new fire alarm systems or modifications to existing systems shall have the written approval of The Tukwila Fire
Prevention Bureau. No work shall commence until a fire department permit has been obtained. (City Ordinance #2051) (IFC
104.2)
20: Contact The Tukwila Fire Prevention Bureau to witness all required inspections and tests. (City Ordinances #2050 and
doc: IMC -4/10
M11 -179 Printed: 02 -21 -2012
#2051)
21: Any overlooked hazardous condition and /or violation of the adopted Fire or Building Codes does not imply approval of
such condition or violation.
22: These plans were reviewed by Inspector 511. If you have any questions, please call Tukwila Fire Prevention Bureau at
(206)575 -4407.
doc: IMC -4/10
M11 -179 Printed: 02 -21 -2012
,s-
CITY OF TUKWILA
Community Development Department
Permit Center
6300 Southcenter Blvd, Suite 100
Tukwila, WA 98188
http: / /www.TukwilaW A,gov
MECHANICAL PERMIT APPLICATION
Applications and plans must be complete in order to be accepted for plan review.
Applications will not be accepted through the mail or by fax.
*please print **
1,- King Co Assessor's Tax No.:
Site Address: 2560 �2 Q4'k�1c-P WO( 454+ Suite Number:
Floor:
V
Tenant Name: New Tenant:
Yes ❑ ..No
:e ONT4GT N t'e` tt1�� `1 g ail prgjd b
I[@Ei tt . 4 �FUt s
a tiI sk.:�. .�. ird r 1
Name: O N ` S , V
jN)
Address: `Wil e G•1 a
lik
72.
Name' Vv eS'k -cle 1
COIVO rr td4
Address:z
4 j)
P ]„ AA 4 tt
City: 5p A,
State: W
Zip: q to vi
:e ONT4GT N t'e` tt1�� `1 g ail prgjd b
I[@Ei tt . 4 �FUt s
a tiI sk.:�. .�. ird r 1
Name: O N ` S , V
jN)
Address: `Wil e G•1 a
lik
72.
City: rk v�'C11 State: Zip: 1,(_1(02 -
Phnne: (oOZ 2c1;. ,L/6ax: (�pt 7nq 43! I
L
Email: V _ 1.
Q / \'
OIL Y� vm.I. Cd,,,t
Valuation of project (contractor's bid price): $ 151000
li
Company Name: .(L! Sekt�
Address: �
City:
Phone:
Contr Reg No.:
Tukwila Business License No.:
State: Zip:
Fax:
Describe the scope of work in detail:
Qu. ) Ci;' ?4''S3 i7 - tl.eA.,.los-t-73
ror -tea FP -0(,)-
Uset Residential: New ❑ Replacement ❑
Commercial: New ❑ Replacement
Exp Date:
Fuel Type; Electric..... Gas ❑ Other:
MApplieffiionsWorms•Applications On LineVA11 Applicatio w'Mecianical permit Applicsiion Revised 8.9-11 door
Revised. Aot$uat 2011
bh
Page 1 of 2
•
Indicate type of mechanical work being installed and the quantity below:
Unit Type.
Qty
Furnace <100k btu
2
Furnace >100k btu
14
Floor furnace
Thermostat
Suspended/wall/floor
mounted heater
Wood/gas stove
Appliance vent
Emergency generator
Repair or addition to
heat/refrig/cooling
system
Other mechanical
equipment
Air handling unit
<10,000 cfm
2
Unit Type
Qty
Air handling unit
>10,000 cfm
2
Evaporator cooler
14
Ventilation fan
connected to single duct
Thermostat
Ventilation system
Wood/gas stove
Hood and duct
Emergency generator
Incinerator— domestic
Other mechanical
equipment
Incinerator —
comm/industrial
O
Unit Type ' :
Qty
Fire damper
2
Diffuser
14
Thermostat
2,
Wood/gas stove
Emergency generator
Other mechanical
equipment
Boiler /Cogtpreasor
Qty
0-3 hp /100,000 btu
3 -15 hp /500,000 btu
15 -30 hp /1,000,000 btu
30 -50 hp /1,750,000 btu
50+ hp/1,750,000 btu
Value of construction — in all cases, a value of construction amount should be entered by the applicant. This figure will be reviewed and is subject
to possible revision by the permit center to comply with current fee schedules.
Expiration of plan review — applications for which no permit is issued within 180 days following the date of application shall expire by limitation.
The building official may grant one extension of time for additional periods not to exceed 90 days each. The extension shall be requested in writing
and justifiable cause demonstrated. Section 105.3.2 International Building Code (current edition).
I HEREBY CERTIFY THAT I HAVE READ AND EXAMINED THIS APPLICATION AND KNOW THE SAME TO BE TRUE UNDER
PENALTY OF PERJURY BY THE LAWS OF THE STATE OF WASHINGTON, AND I AM AUTHORIZED TO APPLY FOR TIES PERMIT.
BUILDING OWNR OR AUTHORIZED AG
Signature: Date: /2-/c14
(_t7C C,4
Print Name: /' 0( 3 Day Telephone: 3I fY �O iQ - p7 Q % 6X/70
MailingAddress:d•7/, Pa C/ G aoriltay pPepa- tarntlp OA 90
City State Z
HAAppliWionAFocaa- Applications On Line12011 Applicniuns\Mectanicai Pcrnat Application Rased 54.11.doal
Revised: August 2011
6h
Page 2 of 2
•
City of Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206 - 431 -3670
Fax: 206-431-3665
Web site: http: / /www.TukwilaWA.gov
RECEIPT
Parcel No.: 9202470010 Permit Number: M11 -179
Address: 811 SOUTHCENTER MALL TUKW Status: APPROVED
Suite No: Applied Date: 12/20/2011
Applicant: VANS Issue Date:
Receipt No.: R12 -00704 Payment Amount: $293.85
Initials: WER Payment Date: 02/17/2012 01:04 PM
User ID: 1655 Balance: $0.00
Payee: ALTERNATIVE MECHANICAL LLC
TRANSACTION LIST:
Type Method Descriptio Amount
Payment Check 2437 293.85
Authorization No.
ACCOUNT ITEM LIST:
Description
Account Code Current Pmts
MECHANICAL - NONRES
000.322.102.00.00 293.85
Total: $293.85
doc: Receipt -06 Printed: 02 -17 -2012
SET RECEIPT
RECEIPT NO: R11 -02762
Initials: Payment Date: 12/20/2011
User ID: 1655 Total Payment: 1,514.70
Payee: PERMITS DIRECT
SET ID: 122011 SET NAME: VANS
SET TRANSACTIONS:
Set Member Amount
D11 -401 1,332.11
EL11 -1130 109.13
M11 -179 73.46
TOTAL: 1,332.11
TRANSACTION LIST:
Type Method Description Amount
Payment Check 2154 1,514.70
TOTAL: 1,514.70
ACCOUNT ITEM LIST:
Description
Account Code Current Pmts
ELECTRICAL PLAN - NONRES 000.345.832.00.0
PLAN CHECK - NONRES 000.345.830
TOTAL:
109.13
1,405.57
1,514.70
,..;
INSPECTION RECORD
Retain a copy with permit
44//-1 79
. INSPECTION.NO. • PERMIT NO.
4,t)
• .
• • ' • • -:"CITY OF TUKWILA BUILDING DIVISION
•
Project: . . • .
Type of Inspection:
;_s^ /new E S.Vz./7-0(RAIA/
Address f - . . .
..8.t/..../p1,9//
Date Called:
Special Instructions:
_ .
,
• •
• • .
Date Wanted:.
4Lm. 'rl'.
Requester:
Phone No:
Ocs—‘ OZ — cg/OO
Approved per applicable codes. OCorrections required prior to approval.
COMMENTS:
. _
67-5,ovi.o AO- .sw 77T aleilit 7- 4i rolv,
LI REI SP CTION FEE REQUIRE. Prio,f to next inspection, fee must be
..7
pat aJ6300 Southcenter Blvd.. Suite 100. Call to schedule reinspection.
:
•
•
•
INSPECTION RECORD
Retain a copyfwith permit
INSPECTION NO. PERMIT N0.
CITY OF TUKWILA ;BUILDING DIVISION
6300 Southcenter Blvd., #100, Tukwila. WA 98188 1Z (206) 431 -3670
Permit Inspection Request Line (206) 431 -2451
ro I I T17,
Projec •
Ty a of I ection: ,
AreSs: -
_I -I yt/1 4 I t
Date Called:
Special Instructions:
•
.
Date Wanted:.
G.— 1
a
p.m.
Requester:
Phone No:
proved per applicable codes.
DCorrections required prior to approval. /
COMM 5:
-
h5pecto
INSPECTION FEE RE UIRED. Prior tg iext inspection, fee must be.
paid at 6300 Southcenter Blvd.. Suite 1. O. Call to schedule reinspection.
INSPECTION NO.
INSPECTION RECORD
Retain a copy with permit
,"i / /-/ 7 9
PERMIT NO.
CITY OF TUKWILA BUILDING DIVISION
6300 Southcenter Blvd., #100, Tukwila. WA 98188 _ (206) 431 -3670
Permit Inspection Request Line (206) 431 -2451
Project:
1/4' 5
Type of Inspection:
�- ?d?r6hi— -r-A,/
Address:
c9// Se C''/ /i)/1 I /
Date Called:
Special Instructions:
y
Date Wanted:.
a.m.
Requester:
Phone No:
.20 6 - 4 e 2 cg /F.1 e
Approved per applicable codes. D Corrections required prior to approval. Z
COMMENTS:
PECTION FEE REQUI ED. Prior to next . spection, fee must be
at 6300 Southcenter B vd., Suite 100. Calljo schedule reinspection.
I
P
12- 28 -'11 11:40 FROM- publicworks /dcd 2064313665 T-337 P002/005 F -519
•
Mechanical Summary
MECH -SUM
2009 Washington State Energy Code Compliance Forms for Nenrealdentlal and MuItlfamlry Residential
Revised December 2010
Project Info
OP
C
—._—
Project Addres6
Date /z,,25..1 t
Sace S
T?Le
SE4AName:
Z&w ,$DuTFICe,JT6
- WA � � l8
' /NAP.(„
For Building
Sari-
Dept. Use
REVIEW
CODE CON W[
Ae-P RC
„
Applicant �AN'S
AppltcanlAddress:
Applicant Phone:
7P" /'
with commissioning requirements,
� ggitect Description
Briefly describe mechanical
system type and features.
en Plans
•sP41T -SvS ,l1 HgA
Include documentation requiring compliance
JAN 0 5
�+ y,'
14?8it of TL
SIOMNIMPOIMINI
Compliance Option
VSImple System Q Complex System Q Systems Analysis
(See Decision Flowchart (over) for qualifications, Use separate MECH•SUM for simple
Mk
- i
& complex
Equipment Schedules
The following Information is required to be incorporated with the mechanical equipment schedules on
the plane. For projects without plans, fill in the required information below.
Cooling Equipment Schedule •
Equip.
ID
Equip
Type
Brand Name'
Model No.1
Capecity2
Stulh
OSA CFM
or Econo?
SEER
or EER
IPLV3
Econmizer
Option or
Exception°
Heat
Recovery
YIN
A110-I
%I_AT
-0.03Z
We octo
...
iso
: -
......
w-I
NP
Te.AWE -
TwAOctD
_/o coo
-.`
I/.0
p! /A
_
--
NI
Heating Equipment Schedule _
Heat
Recovery
YIN
Equip.
ID
Equip
Type
Brand Name'
Model No'
Capacity2
Btulh
OSA cfm
or Econo?
Input Btuh
Output Btuh
Efficiency,
k� P
p� NJ
'R406
T o!6 aT°
7So
r
_.
CO-I
tic
.-ram
ram ago
fg2C0i,
N/A
N%A
3.7?
N
—
Fan E
• ui . ment Schedule
Equip.
o
Equip
ip
Type
Model Na.
No.1
CFM
SP 1
HP /BHP
Flow Controls
Location of Service
MIMI
ail
.1.111111111111
1111111111111111
11111.
1111111111
1111111111111111111
11f available. 2 As tested according to Table 14 -IA through 14.1G. s If requi ed. ° COP, HSPF, Combustion Efficiency, or AFUE, es
applicable. 6 Flow control types: variable air volume(VAV), constant volume (CV) or variable speed (VS). a Exception numbe
VED
DAR
PLIANCE
VED
2012
INCOMPLETE
x111 - I�R
DEC 30 2011
PERMIT CENTER
•
12- 28 -'11 11 :40 FROM- publicworks /dcd 2064313665 T -337 P003/005 F -519
• - •• -••' as - - -- -- .,•f••IM...+- • ....,•Y IY, 1-MIII 1IU1,iM11NM1 St IM I•I•I%,I•IItJIi I WYIMV /It$QI
Mechanical Permit Plans Checklist MECH -CHK
2009 Washington State Energy Code Compliance Forms for Monroe dentlal and Multifamily Res . enlist Roisted December 2010
Project Address .5 flex S _ - �, , ge.—. 44 Mk-
Data ! _ .. 11
The following Information is necessary to check a mechanical permit application for compliance with the mechanical requirements In the
Weshin ton State Nonresidential Energy Code.
Applicability
(yes, no, na
Code
Section
Component
information Required
Location
an Plans
Building Department
Notes
HVAC REQUIREMENTS (Sections 1401.1424)
EMI
lip1om
WA
Ea= Bqul • ment Performance
1411.1
Minimum efficiency
Equipment schedule with type, capacity, efficiency
All
Combustion hig,
Indicate Intermittent ignition, flue /draft damper & jacket toss
-�
1411.1
Air.cooled chiller
Provide total air and weter chiller capacity
--
iNA1
1411.2.1
Water - cooled chiller
Full -load and NPLV valuess adjusted for any nonstandard conditions
Y
1411.4
Pkg. elec. htg.& cig.
List heat pumps on schedule
1411.5
Untnoiosed Heat
Indicate radiant heat system and occupancy controls
--
11110.1111M16=1223
NMI
N k
IMINICZI
1 41 2
1412.2
HVAC Controls
-�
Deadband control
Indicate locations on plane
hi 1
indicate 8 degree deadband minimum
Z.
1412.3
1412.4.1
Humidity control
Indicate humidlatat
—.
Setback and Shutoff
Indicate thermostat with 7 day program capability 6 required setback
M
Dampers
Indicate damper location, leakage rate, control type, & max. leakage
f A ,
1412,4.2
Optimum Start
Indicate optimum start controls
,-
1412.5
Heal pump oontrol
indicate heat pump thermostant & outdoor lockout an schedule
112
1412.6
Combustion heating
Indicate modulating or staged control
--
1412.7
Balancing
Indicate balancing features on plans
M 1
N A
1412.8
Ventilation Control
indicate demand control ventilation for high - occupancy areas
-•-
N ii
1412 g
Loading Dock &
Garage Ventilation
Indicate enclosed loading dock & parking garage ventilation system
activation and control method.
—.
p
1422
Thermostat interlock
indicate thermostat Interlock on plans
A
1432,2,1
Temperature Reset
indicate temperature reset method
-'
ECOEIIII
Air / Water Economizers
_
man
wai
1413.1
Single zone systems
Indicate multiple cooling stage control capability.
Air Scone Operation
indicate 100°,6 capability on schedule
N1.2.
tJ /ti
1413.1
Wtr Econo Operation
Indicate 10091 capacity at 45 degF db & 40 deg F wb
.....
1111
1413.2
W&r Sono Document
Indicate max. O8A condition for design clg load $equipment
erformance date. _
y
OEM1413,4
1413.3
Integrated operation
Indicate capability for partial cooling
Humidification
Indicate direct evap or fog atomization WI air economizer
— -
imilwrans
{
1414.1
punting $ terns '
buct sealing
Indicate duct design pressures, sealing, and testing requirements .
M2
Y
1414.1.2
Low press. duct test
indicate applicable low pressure duct systems shall be leak tested
*1'L
r!
1414.1.3
Hlgh press, duct test
Indicate high pressure duct systems shall be teak tested, and identify the
IA
location of this ductwork on plans
—+
`{
1414.2
Duct Insulation
Indicate R -value of insulation on duct
2.
1415 _
-_--_-
Piping Systems V m
NA
1415.1
Piping Insulation 'Indicate R -value of Insulation on piping
—+
omp : on V oqu roman •
�—
1416.3.2
System Balancing
Indicate air and water system balancing requirements
1100.
amFunctional
1416.3.4
Testing
Provide sequence of operations and test procedures.
I
Documentation
Indicate O &M manuals, record drawings. staff training
tilt 2-
.
1J k
1416.3.5
Comm. Report
Indicate requirements for final commissioning report
N •
1416.4
Compliance Mist
Submit to building ofcial upon Substantial completion.
Mechanical Summary Form
ma
Completed and attached, Equipment echeduie with types, input/output,
efficlen , h. economizer
12- 28 -'11 11:40 FROM- publicworks /dcd
2064313665
T -337 P004/005 F -519
Mf1t:.la atlical Summary (back)
MECH -SUM
2009 Washington State Energy Coda Compliance Forms for Nonresidential and Multifamily Residential
Revised December 2010
System Description
See Section 1421 for full desoription of
Simple System qualifications.
All Systems:
g No humidification? ErNo Reheat?
If Heating /Cooling
or Cooling Only
❑ Constant vol? [✓] 8pfit system? ❑< =84,000 Btuh? (a Economizer
E] Air r,nnlart? ❑ P ir•.kneed avn? ❑ < =1:1A Mn Muhl included'!
0 Coelho Coo < =15 Btuhift2? ❑ Heating Cap, > 0 & < =10 Btuhn12?
If Heating Only:
a cinnn € fm') ❑ <30% outside air? ❑ Heating Cap. < =10 Btuh/tt'?
Decision Flowchart
Use this flowchart to determine if project qualifies for Simple System Option. If not, etcher the
Complex System or Systems Analysis Options must be used,
Yes
Humidificatlo
or Reheat?
-Cap <,c15
Heat/Cool Eq. wl
Cap <'10
ill, or
ft ?
Yes
System Type
Healin, /Coolie.
or Coo Ing Only
Heating Only
Reference
L Section 1421
Yes
f Total \
CFM Serving
Single Roo
No—
a
ackage Unit
ap 4= 135,000
Btuh
Yes Yes
Econo
ncluded
Yes
Simple System
Allowed
(section 1420)
ti
• aiifies
Economizer
Exception
ion t
e
Yes
T
Use Complex
Systems
(section 1430)
Complex Systems
Refer to MECH -COMP Mechanical Complex Systems for assistance In determining Which Complex
Systems requirements ere applicable to this project.
12- 28 -'11 11 :40 FROM- publicworks /dcd
2064313665
T -337 P005/005 F -519
7 ec zanica
'ermit ' ass
- 7th i - i u
201q
2009 Weahtnpton Mete Energy Code complienpe Forme
for Nonrauldentiei and Multifamily Residentlal Rev aed December
Project Address
*jAio nC � ow- 2660 a 444,0_,
information Is necessary to check a mechanical permit application for compliance with the mechanical requiremen
Nonrealdentlei Energy Code.
pate
s in the
The following
Washington State
Applicability
(Yes no`na)
1 Code
Section Component
Infomlatlo Required
Location
on Plana
Building Department
Notes
SERVICE WATER HEATING AND HEATED POOLS (Sections 1440.1454)_
- %4
1440
Service water htg.
1441
Elec. water heater •
Indicate R -10 insulation under tank
_ 1442
Shut-off controls
Indicate automatic shut-off of circulators or heat trace
1443
Pipe Insulation
Indicate R•value of insulation on piping
1444
Pump Energy
Indicate method of pump energy management (Sec 1438)
1445
Heat Recovery
Indicate preheat capacity as % of peak service water demand.
1460 •
Heated Poole
1452
Heat Pump COP
Indicate minimum COP of 4.0
1452
Heater Efficiency
Indicate pool heater efficiency
1453
Pool heater controls
Indicate switch and $5 degree control
_..W
1454
Pool covers
indicate vapor retardant cover
1454
Poole 50+ degrees
Indicate R -12 pool cover
1455
Heat Recovery
Indicate method and capacity of exhaust air temperature reduction
COLD STORAGE
Sections 1460 -1465)
13 A '
1460
Cold Storage -
1463
Evaporators
Indicate motor type and speed control
1464 Condeneors
Indicate condenser cooling type, design wb temp and control
1465 rCompressors
Indicate design minimum conderieing temp and control,
If "no" is indicated for any Item in Sections 1401.1424 or 14404465 , provide explanation;
0 WANE'
Weights
if/EEt th.' /T
e' , UNur
SSRPRCO23 -EN
RNs
&&sW w 5.0v7P e t
Table 51. TWA Unit & Corner Weights — Ibs (60 Hz) P''
Tons
Model No.
Shipping
Max (Ibs)
Net Max
(Ibs)
Corner Weights
1
2
3
4
6
TWA073D
382
328
113
83
56
76
---j. 7.5
TWA090D
394
340
117
86
58
79
10
438
TWA120D
509
127
121
72
118
4. 15
TWA180E
898
765
202
192
181
190
20
TWA240E
981
848
254
266
147
181
Figure 34. TWA073, 090, 120
Service Access
W
i
02
•1"
ssit
43
Figure 35. TWA180, 240
01
SeMee Aeems
f
in
#1
REVIEWED FOR
CODE COMPLIANCE
APPROVED
JAN 0 5 2012
City of Tukwila
BUILDING DIVISION
INCOMP ETE
'_TR #.�
x111 -179
03
RECEIVED
DEC 30 2011
PERMIT CENTER
97
/Far t/NIT
(9W upir
V A1,5
we57-69m2 sooNceevitic
•TRANE.
Weights
Table 52. TWE Unit and Corner Weights - Ibs - 60 Hz
Tons
Model No.
Shipping Max (Ibs)
Net Max (Ibs)
Corner Weights - Vertical
Corner Weights - Horizontal
1
2
3
4
A
B
C
D
5
TWEO61D /E
263
232
55
71
51
55
54
67
50
61
.,.71h
TWE090D /E
360
323
67
99
75
82
56
92
87
88
10
TWE120D /E
429
393
77
121
110
85
79
118
77
119
121h
TWE150E
730
676
168
192
181
135
196
164
145
171
4.15
TWE180E
729
675
167
192
181
135
196
163
145
171
20
TWE240E
891
818
258
168
161
231
256
181
146
235
Figure 36. Vertical - TWE061, 090, 120
#1
Control Box Access
.\n
•
#4
Top View
Figure 38. Horizontal - TWE061, 090,120
A
Top View
B
I
D
I
Ad Flow
IC
Control Box
Access
U3
Figure 37. Vertical - TWE150, 180, 240
Control Box Access
01
#2
04
Top View
Figure 39. Horizontal - TWE150,180, 240
A
Top View
B
L
J
t
Jr A Flow
I/c
Control Box
Access
03
98 SSP- PRCO23 -EN
,..
VICINITY mAp
: 14
KEY PLAN
V COA
"4-
I ti t-.,, e • 2 k...ta,i
13
i'. S 12(10^, St t. -.,
,1, •• ' (2)
()I ••,, •0,
k4 .t-,,,
...J..,
' > , ',... .e" .0,...,4...
'
fa '
it • • Sth St 0
W ...
croio , . • ..6 .
t 7--- . c.. 7,
m "kki
la* ; Vs
; .14.21`14 S! rt Ta 7,';
`11
., ivy Tuk
co • .- tp k' l•
0 ti
V, w t I .
if 8 uetk St
al
te C.- al 1,,P
F. 22' t- i',•,
z• ••
..
,1—*
ii ..
.b
i g i g:mtd gt .4404. s 1 t....
:it%
4., IF CD ',-,,, '''''''. - -
,— i" V;. "i'•: -
, —..,, ,..„10k.Y-:',-,
v .:,-.. ' : ' .'.:' .--...:.:,:.(-- -
a
: ,. ,• 2, ,i,
. , . . g .a.
C11.. -
4 i".. .
- ., ..- ,..
SeaTa : ..0.-
,
. vao . :,,, ,,..," ,, klefulic ken _.4
51, i -- ; , . Heights ••kt
a -.,.."'
'1V. 11 -*' ir, .414
s 1 nth st
,.._
• . ""•-: ".:f ',
- c3
§'
Sr
y, ,:' -, ,- „ ;
-; Vaiiey , ..,,c
..;.
4, . Roe Park
'915th St t: It 0 S 184.1tt Si .., .....,, ,...
-
.,. .
1.
> IttAti rt. P /-' Angle Lake .
'.iii,:6"" i
8 ,`" .
..._...
WESTFIELD
SOUTHCENTER
THIS PROJECT IS IN A .
.
ANS
..PACE NO. 544
@
COVERED MALL BUILDING
EXTERIOR MALL
STREET LOCATION
' REVIEWED FOR
CODE COMPLIAN•
APPROVED
. _ ..
‹, ' 1
Rentpn
r;) rut unicipai
coe
c'c Airpoti , 4: I: d St
g. 333d S 5 ‘.t•
r t
0,
.12. C) Renton Downtown '.., fi
'3r. Renton ..,e.
S
.1> 4‘,.
Suttee% 1714 0) ii
. 1
, .
ar SW rES St ito,
4".
, isi ". . r•, at ReMoriNAllave
, ..o It, tt gitQtiz . _ S hot* rtg C efse.
C6m,ple* ,,
t t '
r
F
0
VVes'tte,h1 \'..,
Southwentet 5!
0
, Co
. CP
g'
3 X '
I 3:- • ,..•
` '''' , =.
k a
!"2 : n
; 6 F.,
,, 4
,0
. ,os Cs,
‹ 3W 41w, ;:is , _
1 ,
, , ‘, _
, s Cell 9,
St '
S 1 k`V" S 1Eigth St ..5.4,'‘' 430 51 !:1 ri
. . ,k.
€ 1 ! t '' ›-
., ..
co ,, ;T.,
k $ 1 f' co
.r- - ' 6:
ct ,
, 5 :4
SI 1' ,-;
1
:,i
s 19So St
o.
,o,
NORTH
.. .
, JAN 05 2012
I o kwiia
BUILDING IVISION
. . . .
—
7P. .
1
11!
Li 1-1
Ir
,
i*
macys
ig,,_.
• 0 0 C3
175)--4 ao•Na'arC3 0 C3 0
a o a - 0
te-
t.....
A.'
.1
..,
k,s,„
.........,.__
3
ii__
-1.--,
.1
II-
1.....■.11% I
—
_r_i I
- 1_1
mf
__n_gt.
11J
.
.1
1.I
i.i°
T T
il
H
I g
■
•
EARS
DRINKING FOUNTAINS
C.----v-- I
r,.,.1i:3‘
P
RECEIVED 1
DEC 30 2011 NORTH
SEA
LE WASHINGTON 98188
, "-N.
•1;
WESTFIELD SOUTHCENTER PERMITCENTER io.s.e'N
44
LEVEL 1
OF 3 LINCOMPLETE I
z,
TR#_ M 1 I .i... 1 7 9
08 -01 -2012
City of Tukwila Jim Haggerton, Mayor
Department of Community Development Jack Pace, Director
JOHN HENRY IV
15640 N 7 ST, SUITE B9
PHOENIX AZ 85022
RE: Permit No. M11 -179
VANS
811 SOUTHCENTER MALL TUKW
Dear Permit Holder:
In reviewing our current records, the above noted permit has not received a fmal inspection by the City of Tukwila Building
Division. Per the International Building Code, International Mechanical Code, Uniform Plumbing Code and/or the National
Electric Code, every permit issued by the Building Division under the provisions of these codes shall expire by limitation and
become null and void if the building or work authorized by such permit has not begun within 180 days from the issuance date
of such permit, or if the building or work authorized by such permit is suspended or abandoned at any time after the work has
begun for a period of 180 days. Your permit will expire on 09/12/2012.
Based on the above, you are hereby advised to:
1) Call the City of Tukwila Inspection Request Line at 206 -431 -2451 to schedule for the next or fmal inspection.
Each inspection creates a new 180 day period, provided the inspection shows progress.
-or-
2) Submit a written request for permit extension to the Permit Center at least seven (7) days before it is due to
expire. Address your extension request to the Building Official and state your reason(s) for the need to extend
your permit.
The Building Code does allow the Building Official to approve one extension of up to 180 days. If it is determined that your
extension request is granted, you will be notified by mail.
In the event you do not call for an inspection and/or receive an extension prior to 09/12/2012, your permit will become null
and void and any further work on the project will require a new permit and associated fees.
Thank you for your cooperation in this matter.
File: Permit File No. M11 -179
6300 Southcenter Boulevard, Suite #100 • Tukwila, Washington 98188 • Phone 206-431 -3670 • Fax 206-431 -3665
• •
• NP MECHANICAL, INC. CONSULTING ENGINEERS
6
(il 1717 W. Northern Ave. • Suite 116 • Phoenix, AZ 85021 • Phone (602) 249 -6311 • Fax (602) 249 -6354
RESPONSE TO CITY COMMENTS
Date: December 28, 2011
To: Dave Larson, Senior Plans Examiner From: Art Romero
Company: City of Tukwila Building Division
Re: Van's — 811 Westfield Southcenter Mall
Mechanical Permit Application No.: M11 -179
Below is the written response to the Building Department review comment's for the project
referenced above.
Item #1: See attached form.
Item #2: See attached new sheet M2.
Item #3: The new HVAC units are of the same type as the replaced units however they are of
different tonnage. The new units weigh considerably less than the existing. Refer to
the attached cut sheets indicating the weights of the old vs. the new.
Item #4: Comply. Refer to the attached 11x17.
Item #5: The return air path from the sales area to the stock room is via the open vestibule, in
front of the fitting rooms. The pathway from the sales to the stock is open and
unobstructed. There are no doors on the entries.
Item #6: The new HVAC units are to be located in the same location as the existing units.
INCOMPLETE
LTR #�_
ti
iECEIVI�D
DEC 30 2011
PERMIT CENTER
Filename: 11253 - Vans Southcenter -City Comments written response.doc
• •
City of Tukwila
Jim Haggerton, Mayor
Department of Community Development Jack Pace, Director
December 22, 2011
John Henry IV
Pleger/Henry Architecture
15640 N 7th St, Suite B9
Phoenix, AZ 85022
RE: Incomplete Letter #1
Mechanical Permit Application M11 -179
Vans — 811 Southcenter Mall
Dear Mr. Henry,
This letter is to inform you that your permit application received at the City of Tukwila Permit Center on
December 20, 2011 is determined to be incomplete. Before your application can continue the plan
review process the attached/following items from the following department(s) need(s) to be addressed:
Building Department: Dave Larson at 206 431 -3678 if you have any questions concerning
the attached comments.
Please address the comment above in an itemized format with applicable revised plans, specifications,
and/or other documentation. The City requires that two (2) sets of revised plans, specifications and/or
other documentation be resubmitted with the appropriate revision block.
In order to better expedite your resubmittal a `Revision Submittal Sheet' must accompany every
resubmittal. I have enclosed one for your convenience. Revisions must be made in person and will
not be accepted through the mail or by a messenger service.
If you have any questions, please contact me at the Permit Center at (206) 431 -3670.
Sincerely,
7,JLe
Bill Rambo
Permit Technician
Enclosures
File: M11 -179
W:\Permit Center\lncomplete Letters\2011\111 -179 Incomplete Ltr # 1.doc
6300 Southcenter Boulevard, Suite #100 • Tukwila, Washington 98188 • Phone: 206 - 431 -3670 • Fax: 206 - 431 -3665
Tukwila Building Division
Dave Larson, Senior Plan Examiner
Determination of Completeness Memo
Date: December 22, 2011
Project Name: Vans
Permit #: M11 -179
Plan Review: Dave Larson, Senior Plans Examiner
The Building Division has deemed the subject permit application incomplete. To assist the applicant in
expediting the Department plan review process, please forward the following comments.
(GENERAL NOTE)
PLAN SUBMITTALS: (Min. size 11x17 to maximum size of 24x36; all sheets shall be the same size).
(If applicable) Structural Drawings and structural calculations sheets shall be original signed wet
stamped, not copied.)
1. Please provide a completed Washington State Energy Code Mechanical Summary Form. I have
included one with this memo.
2. Page M2 appears to be for a different project than page M1 as the equipment schedules do not
match the equipment. AHU 1 and CUI are shown on Ml. M2 has HP 1 listed in the schedule.
3. Are the new units replacing old units of the same type? If so, are they equal to or less in weight
than the old units.
4. Please provide a mall plan showing where this tenant space is located.
5. How does the return air from the front retail portion of the store get back to the return air intake?
6. Provide a roof plan for proposed rooftop equipment.
Should there be questions concerning the above requirements, contact the Building Division at 206 -431-
3670. No further comments at this time.
• I
PLAN REVIEW /ROUTING SLIP
ACTIVITY NUMBER: M11 -179 DATE: 12 -30 -11
PROJECT NAME: VANS
SITE ADDRESS: 811 SOUTHCENTER MALL
Original Plan Submittal X Response to Incomplete Letter # 1
Response to Correction Letter #
Revision # After Permit Issued
DEPARTMENTS:
14.0C..11
Building` Division IN
Public Works ❑
Fire Prevention
Structural
Planning Division
Permit Coordinator
DETERMINATION OF COMPLETENESS: (Tues., Thurs.)
DUE DATE: 01-03-12
Complete Incomplete Not Applicable ❑
Comments:
:Permit Center Use Only
INCOMPLETE LETTER MAILED: LETTER OF COMPLETENESS MAILED:
Departments determined incomplete: Bldg ❑ Fire ❑ Ping ❑ PW ❑ Staff Initials:
TUES/THURS ROUTING:
Please Route Structural Review Required n No further Review Required
REVIEWER'S INITIALS: DATE:
APPROVALS OR CORRECTIONS:
Approved n Approved with Conditions
Notation:
n
DUE DATE: 01-31-12
Not Approved (attach comments) n
REVIEWER'S INITIALS: DATE:
Permit Center Use Only
CORRECTION LETTER MAILED:
Departments issued corrections: Bldg ❑ Fire ❑ Ping ❑ PW ❑ Staff Initials:
Documents/routing slip.doc
2 -28 -02
PLA
•
IEW /ROUTING SLIP
L
ACTIVITY NUMBER: M11 -179 DATE: 12 -20 -11
PROJECT NAME: VANS
SITE ADDRESS: 811 SOUTHCENTER MALL
X Original Plan Submittal Response to Incomplete Letter #
Response to Correction Letter #
Revision # After Permit Issued
DEPAR MENT :
iu li ding ''vision
Public Works ❑
dk \W-3--A\
ire Prevention
Structural
Planning Division
El
❑ Permit Coordinator
DETERMINATION OF COMPLETENESS: (Tues., Thurs.) DUE DATE: 12-22-11
Complete ❑ Incomplete
Not Applicable
n
Comments:
'Permit Center Use Only '
INCOMPLETE LETTER MAILED: I ~1" LETTER OF COMPLETENESS ILED:
Departments determined incomplete: Bldg t Fire ❑ Ping ❑ PW ❑ Staff Initials:
TUES/THURS ROUTING:
Please Route ❑ Structural Review Required ❑ No further Review Required ❑
REVIEWER'S INITIALS: DATE:
APPROVALS OR CORRECTIONS:
Approved ❑ Approved with Conditions ri
Notation:
REVIEWER'S INITIALS:
DUE DATE: 01 -19-12
Not Approved (attach comments)
DATE:
•
'permit Center. Use Only . ' •.
CORRECTION LETTER MAILED:
Departments issued corrections: Bldg ❑ Fire ❑ Ping ❑ PW ❑ Staff Initials:
Documents /routing slip.doc
2 -28-02
S S
City of Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206 - 431 -3670
Fax: 206 -431 -3665
Web site: http: / /www.ci.tukwila.wa.us
Revision submittals must be submitted in person at the Permit Center. Revisions will not be accepted through
the mail, fax, etc.
Date: l 2 - # cg - I l
Plan Check/Permit Number: 1• 11 -179
® Response to Incomplete Letter # 1
❑ Response to Correction Letter #
❑ Revision # after Permit is Issued
❑ Revision requested by a City Building Inspector or Plans Examiner
RECEIVED
CITY OF TUKIMIA
!DEC 3 0 2011
PERMIT '
Project Name: Vans
Project Address: 811 Southcenter Mall 7
Contact Person: 011„ .4 V ( I 1 Phone Number: 41a 2d-17 17 00
Summary of Revision: se e + A-C1l e ci
Sheet Number(s): MI l M2-
"Cloud" or highlight all areas of revision including date of revision
Received at the City of Tukwila Permit Center by: A�"
V- Entered in Permits Plus on O17b1
\applications \forms- applications on line\revision submittal
Created: 8 -13 -2004
Contractors or Tradespeople Peer Friendly Page
•
General /Specialty Contractor
A business registered as a construction contractor with L &I to perform construction work within the scope of
its specialty. A General or Specialty construction Contractor must maintain a surety bond or assignment of
account and carry general liability insurance.
Business and Licensing Information
Name ALTERNATIVE MECHANICAL LLC UBI No. 602991807
Phone 4252211163 Status Active
Address 22129 Ne 114Th St License No. ALTERML901 KQ
Suite /Apt. License Type Construction Contractor
City Redmond Effective Date 5/18/2010
State WA Expiration Date 5/18/2012
Zip 98053 Suspend Date
County King Specialty 1 General
Business Type Limited Liability Company Specialty 2 Unused
Parent Company
Business Owner Information
Name
Role
Effective Date
Expiration Date
GORDON, ROBERT E
Partner /Member
05/18/2010
Bond Information
Page 1 of 1
Bond
Bond Company Name
Bond Account Number
Effective Date
Expiration Date
Cancel Date
Impaired Date
Bond Amount
Received Date
RLI INS CO
LSM0193777
05/06/2010
Until Cancelled
$12,000.00
05/18/2010
Assignment of Savings Information No records found for the previous 6 year period
Insurance Information
Insurance
Company Name
Policy Number
Effective Date
Expiration Date
Cancel Date
Impaired Date
Amount
Received Date
3
Western
National Assur
Co
CPP 104113500
05/06/2011
05/06/2012
$1,000,000.00
07/27/2011
2
First National
Ins Co
25CC30033420
05/06/2011
05/06/2012
$1,000,000.00
05/06/2011
1
FIRST
NATIONAL
INSURANCE
COMPA
25CC30033410
05/06/2010
05/06/2011
$1,000,000.00
05/18/2010
Summons /Complaint Information No unsatisfied complaints on file within prior 6 year period
Warrant Information No unsatisfied warrants on file within prior 6 year period
https: // fortress .wa.gov /lni/bbip/Print.aspx 02/21/2012
1414 Ducting Systems
1414.1 Duct Sealing and Testing: Duct work and plenums shall be sealed in accordance with
Section 1414.1.1. Additionally, ducts shall be tested in accordance with Sections 1414.1.2 and
1414.1.3 as required.
1414.1.1 Sealing: Duct work which is designed to operate at pressures above'' /: inch water
column static pressure shall be sealed as follows:
1. Static pressure '' /z inch to 3 inches: Seal all transverse joints and longitudinal seams.
Spiral lock seams in round and flat oval duct work do not require sealing; however,
other seams shall be sealed.
2. Static pressure above 3 inches: Seal all transverse joints, longitudinal seams and
duct wall penetrations.
All low pressure supply and return air systems not located entirely within the conditioned space,
including the unconditioned side of enclosed stud bays or joist cavities /spaces used to transport
air, shall be securely fastened and sealed. Duct work shall be sealed using welds, gaskets, mastic,
or mastic -plus- embedded -fabric tape. Enclosed stud bays or joist cavities /spaces used to transport
air shall be sealed using mastic -plus- embedded -fabric tape, or when drywall is used to enclose the
air system, drywall mud and tape. Duct tape is not permitted as a sealant on any ducts.
EXCEPTION: Fibrous glass duct systems installed in accordance with Standard UL
181A and flexible duct systems installed in accordance with Standard UL 18IB may use
tapes listed for these systems.
1414.1.2 Low Pressure Duct Leak Test: All duct systems shall be sealed to a leakage rate not
to exceed 6 percent of the fan flow if the duct system:
1. Is connected to a constant volume, single zone, air conditioner, heat pump or
furnace; and
2. Serves less than 5,000 square feet of floor area; and
3. Has more than 25 percent duct surface area located in any unconditioned space.
The leakage rate shall be confirmed through field verification and diagnostic testing, in
accordance with SMACNA Duct Leakage Test Procedures - 1985.
1414.1.3 High Pressure Duct Leak Test: Duct work that is designed to operate at sta
press ' - . ess of 3 inches water column shall be leak- tested in accordance MACNA
Duct Leakage Test . • res - 1985. Representative sections totalin l . - ss than 25 percent of
the total installed duct area for signated pressure class s.• . e tested. Duct systems with
pressure ratings in excess of 3 in. w.c. s . . e ide ' . on the drawings. The maximum
permitted duct leakage shall be:
Lmax = CLP0.65
Where:
Lmax
CL
CL
. imum permitted leakage in cfm/100 ft2 duct surface a
Duct leakage class, cfm/100 ft2 at 1 in. w.c.
6 for rectangular sheet metal, rectangular fibrous, and round flexible ducts.
= 3 for round/flat oval sheet metal or fibrous glass ducts.
= Test pressure, which shall be equal to the design duct pressure class rating in w.c.
•
DUCTWORK SYMBOLS
SINGLE
DOUBLE
ABBR.
DESCRIPTION
r
RECTANGULAR DUCT
C (.)
P
•
ROUND DUCT
•
CURVED ELBOW -MIN. RADIUS R: 1.5 WIDTH
-J_
-
•
90 DEG. ELBOW WITH SINGLE RADIUS TURNING VANES
a
•
FLEXIBLE DUCT CONNECTION
+ f Jr
BD
BALANCING DAMPER (USE O.B.D. UNLESS
NOTED OTHERWISE)
NEW TO EXISTING CONNECTION
4
•
SPIN -IN FLEX DUCT TAKE -OFF W /DAMPER
•
SA
SUPPLY AIR
•
EXH
•
z
RA
•
REL
•
OSA
EXHAUST AIR
RETURN AIR
RELIEF AIR
OUTSIDE AIR
•
TOX
INONSIMMINNINEMMINESMEMEREIVIUMINO
THERMOSTAT X: UNIT OR ZONE NUMBER
0 KEYED MECHANICAL NOTES ®
W
Z I
v,
1.......,..» .,..w.» »„.,.1
12 "0
1
300
t-1
0
300
0 MECHANICAL PLAN
SCALE: 1/4" = I' -O"
1. 18x8, 16x6 NECK SR -1. BALANCE TO CFM NOTED.
2. 12x12, 6"0 NECK CD -1. BALANCE TO CFM NOTED.
3. DUCT SMOKE DETECTOR TO SHUT DOWN UNIT UPON DETECTION OF SMOKE.
4. PROVIDE FLEXIBLE CONNECTION.
5. 3/4" PRIMARY CONDENSATE DRAIN LINE DOWN IN WALL AND OUT TO DISCHARGE
INTO MOP SINK. PIPE SHALL TURN IN A DOWNWARD POSITION AND TERMINATE 2"
ABOVE MOP SINK RIM. PROVIDE WITH LABEL.
SEPARATE PERMIT
REQUIRED FOR:
❑ Mechanical
Electrical
t' Plumbing
tirGas Piping
City of Tukwila
BUILDING DIVISION
6. 3/4" SECONDARY CONDENSATE DRAIN LINE DOWN IN WALL AND OUT TO DISCHARGE
INTO MOP SINK. PIPE SHALL TURN IN A DOWNWARD POSITION AND TERMINATE 2"
ABOVE MOP SINK RIM. PROVIDE WITH LABEL.
REVIEWED FOR
CODE COMPLIANCE
APPROVED
JAN 0 5 2012
C of u Wifa
BUILDIity NG VISION
FILE COPY
Permit No ..,wr ` ✓
LI Pan review approval is subject to errors end awr fors.
1 Approval of construction documents does not authete
Ale violation of any adopted code or ordinance. Receipt
of approved Flak! Copy and cone= is ec knowled0d:
ia
7. 26x20 OUTSIDE AIR DUCT TO CONNECT TO EXISTING 26x20 (MIN.) OUTSIDE AIR DUCT
SERVING REMOVED AIR HANDLING UNIT. FIELD VERIFY EXACT POINT OF CONNECTION.
. 26x20 RETURN AIR DUCT OPEN TO SPACE. PROVIDE WITH INTAKE SCREEN.
r
1: 1
10200
City Of itdcwiIa
BUILDING DIVISION
9. MOTORIZED LOW- LEAKAGE, OPPOSED BLADE OUTSIDE AIR DAMPER. PROVIDE WITH
NO MA LY CL'SEI, 4V. A TUATO'. MIN. S TTING TO :E AS NOTED
10. 16 GAUGE GALVANIZED SECONDARY DRAIN PAN. PROVIDE WITH 3/4" OUTLET.
11. EXISTING EXHAUST FAN TO BE REUSED. REBALANCE EXHAUST AIR TO 75 CFM
0.125" E.S.P. FIELD VERIFY.
12. THERMOSTAT. MOUNT AT 48" A.F.F. COORDINATE EXACT LOCATION WITH
ARCHITECTURAL DRAWINGS. PROVIDE WITH CLEAR PLASTIC LOCKING COVER.
1
r
___________________ !_. [r
6 „0
'4.
(NEW)
i
J
6 "0
13. MOTORIZED LOW- LEAKAGE, OPPOSED BLADE, RETURN AIR DAMPER. PROVIDE WITH
NORMALLY OPEN, 24V. ACTUATOR.
X14. EXISTING OUTSIDE AIR DUCT (26X20 MIN.) TO BE REUSED. FIELD VERIFY. PROVIDE
NEW DUCT & INTAKE CAP AS REQUIRE IS EXISTING DUCT IS LESS THAN 26X20.
1
24 "0 - 250
22 "0
1
250
1■1
GENERAL NOTES
NOTE: PRIOR TO CONSTRUCTION/ BID THE CONTRACTOR SHALL VISIT THIS SITE AND
FIELD VERIFY THE EXISTING LOCATIONS AND SIZES OF ANY LANDLORD PROVIDED, OR
EXISTING, OUTSIDE AIR INTAKES THROUGH ROOF, LANDLORD PROVIDED CHILLED /HOT
WATER PIPING MAINS, TOILET EXHAUST MAINS, OUTSIDE AIR DUCTWORK, CONDENSATE
LINE MAINS, ETC.
THE CONTRACTOR SHALL FIELD VERIFY ANY/ CONDITIONS WHICH MAY CONFLICT WITH
THE DESIGN SHOWN ON THESE PLANS. NOTIFY ARCHITECT IMMEDIATELY.
LANDLORD NOTES
ALL EQUIPMENT, DUCTWORK, CONTROLS ETC. NOT BEING REUSED SHALL BE
REMOVED. DO NOT JUST ABANDON.
ALL ROOF WORK SHALL BE PERFORMED BY THE LANDLORD'S DESIGNATED ROOFER.
ALL WORK SHALL BE SCHEDULED WITH LANDLORD'S FIELD REPRESENTATIVE.
0
250
18 "0
250
SEP .I'2Z013
INCOMPLETE
NEW HVAC UNITS TO BE IN THE SAME LOCATION
AS THE EXISTING UNITS.
(NEW)
AEVlSIONS
No changes shalt bo made to the scan
of work without prior approval of
Tukwila Building Division.
NOTE: Revisions will require a new plan submittal
and may include additional plan review fees.
Q
C13
0
■
la
_ =N E
� u
w CO
C
LL
C ot
o� w'
oa
1
00
00
L cn
4D � C
cu
-c C
.0
VI 7r, SO
-� o 5
_ z vi
c/1 N Lfl
REVISIONS:
MPE
I2 -28 -II PER CITY OF TUKWILLA
RECEIVED
DEC 302011
PERMIT CENTER
M(1I7?
MECHANICAL PLAN (Cont.)
SCALE: 1/4" = I'-O"
NP MECHANICAL, INC.
CONSULTING ENGINEERS
1717 W. NORTHERN AVE. - SUITE 116
PHOENIX, ARIZONA 85021
(602) 249 -6311
PROJECT NO
PLOT DATE:
11253
12 -29 -11
EXPIRES 08/12/12
DATE:
12 -13 -11
DRAWN BY:
MPE
FILE NAME:
PH 11 -095 -M 1
PROJECT NUMBER:
PH11 -095
2
GALVANIZED STEEL
STRAP FASTENED TO
STRUCTURE
LOAD RATED FASTENER
WITH WASHER
SPIRAL DUCT
DUCT BAND OF SAME
SIZE AS HANGER STRAP
SPIRAL DUCT INSTALLATION DETAIL
SUPPLY DUCT
BALANCING DAMPER
SPIRAL BRANCH DUCT. SUPPORT
WITH GALVANIZED STEEL STRAPS
BEADED SLEEVE JOINT (TYPICAL)
90' 1.5 SPIRAL ELBOW
BALANCING HANDLE.
LOCK INTO POSITION
AND MARK
PERMANENTLY.
SQUARE TO ROUND ADAPTOR
(IF REQUIRED)
LAY -IN CEILING
SUPPLY AIR DIFFUSER WITH
LAY -IN FRAME (SURFACE
MOUNT SIMILAR)
SPIRAL DUCT INSTALLATION DETAIL
"CUSTOM CURBS"
MODEL CES -1
SUPPORT CURB.
RIGID INSULATION
l
DOUBLE NEOPRENE
WAFFLE ISOLATOR
BUILT -UP ROOFING
ROOF CONSTRUCTION
SUPPORT FRAMING AS
OCCURS - SEE STRUCTURAL
DRAWINGS.
SPIRAL DUCT INSTALLATION DETAIL
NTS
ve
FOR ANCHOR TO
STRUCTURE -SEE
DETAIL.
VIBRATION
ISOLATOR
(TYPICAL -SEE
SPECS.)
SEAL PAN
WATER
TIGHT
2 "X2 "X3 /8 "L ANGLE
MIN. OF TWO REQ'D.
1/2" ALL - THREAD
AT EACH CORNER
16 GA. GALV.
SECONDARY
CONDENSATE
DRAIN PAN.
DOUBLE NUT
ALL CONNECTIONS.
AIR HANDLING
UNIT.
AHU MOUNTING DETAIL
NTS
•
SPLIT SYSTEM HEAT PUMP UNIT
INDOOR UNIT
OUTDOOR UNIT
MARK
MODEL
CFM
E.S.P.
WP
HP
OSA
AU HEAT
( (KW)
MARK
MODEL
COOLING CAPACITY (MBH)
HEATING
CAP.
(MBH)
EER
V/95
EGH
W (ILB) T
SENSIBLE
TOTAL
ENT. AIR ('F)
DB
W9
AHU -1
TWE090
3000
0.5"
1.5
750
15.0
CU -1
TWA090
74.3
96.7
80
67
51.5
11.0
208/3
340
E
ii-VE
0 FOR
NOTES:
1. UNITS SHALL BE AS MANUFACTURED BY: TRANE.
2. UNITS ARE SIZED FOR 85 'F SUMMER AMBIENT TEMPERATURE, 23 'F WINTER TEMPERATURE.
3. COOLING CAPACITY, MINIMUM HEAT CAPACITY AND CFM ARE MINIMUM OUTPUT REQUIRED.
ALL UNITS SHALL HAVE NO LESS THAN 98% OF THESE CAPACITIES. COOLING CAPACITY IS
CODE COMPLIANCE
APPROVED
JAN 0 5 2012
Clay Of Tukwila
BUILDING DIVISION
GROSS COIL CAPACITY REQUIRED (FAN HEAT NOT DEDUCTED).
4. PROVIDE FAN COIL UNIT WITH FILTERS AND FILTER RACK SIZED AT 500 FPM VELOCITY. e
5. PROVIDE WITH PROGRAMMABLE HEATPUMP THERMOSTAT -7- DAY W /SETBACK AND 5 DEG. DEADBAND.
P:0 I W •A ' „:I T •P -. 0► •. •F
7. REFER TO SEQUENCE OF OPERATION FOR 100% ECONOMIZER.
NOTE: ALL DX SPLIT SYSTEM FAN COIL WITH REMOTE CONDENSING UNIT WITH REFRIG. LINES EXTENDING OVER "50"
FT. IN LENGTH TO HAVE HARD START KIT, CRANK CASE HEATER, TIME GUARD, AND LIQUID SOLENOID VALVE
AT CONDENSER. INSTALL AND ADJUST REFRIG. AND OIL CHARGE PER MFR'S RECOMMENDATIONS.
WY-
0 GRILLE, REGISTER, AND DIFFUSER SCHEDULE
MARK
DESCRIPTION MANUFACTURER
MODEL MATERIAL
MODULE FRAME
FRONT
BLADES
DAMPER
FINISH
CD -1
CEILING DIFFUSER
TITUS
TM S
STEEL
12x12
FLANGE
4 -WAY
YES
SR -1
SUPPLY REGISTER
TITUS
S300FS
STEEL
18x8
FLANGE
SHORT
YES
*
NOTES:
1. FIELD PAINT ALL DIFFUSERS AND GRILLES. COLOR BY ARCHITECT.
2. PROVIDE CD -1 WITH "TITUS" TRM, RAPID MOUNT FRAME.
• HVAC NOTES
1. ALL WORK TO BE AS PER THE L.L. SPECS, ALL LOCAL CODES, RULES AND REGULATIONS. ALL WORK TO BE AS PER ASHRAE AND
SMACNA GUIDELINES.
2. ALL DUCT SIZES SHOWN ARE CLEAR INSIDE. ALL DUCTS TO BE SHEET METAL DUCTS AS PER ASHRAE AND SMACNA GUIDELINES.
3. PROVIDE NECESSARY TURNING VANES, SPLITTER DAMPERS, VOLUME EXTRACTORS AND OTHER FEATURES NEEDED FOR A SMOOTH AND
CONTROLLED FLOW OF AIR.
4. LOCATIONS SHOWN OF HVAC EQUIPMENT AND DUCTS ARE SCHEMATIC ONLY. VERIFY STRUCTURAL DETAILS AND OTHER DETAILS THAT
WILL AFFECT ROUTING AND PLACEMENT OFTHESE COMPONENTS. IF MORE SUPPORTS ARE NEEDED FOR HVAC EQUIPMENT, COORDINATE
WITH THE ARCHITECT.
5. PROVIDE PROPER DUCT TRANSITIONS FOR ACTUAL HVAC UNITS INSTALLED. ROOF PENETRATIONS, IF ANY, TO BE MADE AS PER
LANDLORD SPECS. VERIFY DETAILS WITH LANDLORD.
6. PROVIDE AND INSTALL THERMOSTATS AT LOCATIONS AS DIRECTED BY THE ARCHITECT.
7. COORDINATE ACTUAL LOCATIONS OF DIFFUSERS, REGISTERS AND GRILLES WITH CEILING DETAILS AND OTHER FEATURES SUCH AS
LIGHTING FIXTURES ETC. THAT MAY AFFECT PLACEMENT OF THE HVAC SYSTEM COMPONENTS.
8. PROVIDE APPROVED FIRE DAMPERS WITH ACCESS PANELS AT ALL PENETRATIONS OF FIRE RATED PARTITIONS, WALLS AND CEILINGS
AS REQUIRED BY CODE.
9. INSULATE NECK, THROATS AND COLLARS OF SUPPLY OUTLETS ABOVE CEILING.
10. ALL ROOF PENETRATIONS MADE BY THE TENANT'S GENERAL CONTRACTOR MUST CONFORM TO LANDLORD'S STANDARD CRITERIA AND
SHALL BE SUBJECT TO LANDLORD'S APPROVAL AS TO LOCATION AND CONSTRUCTION DETAILS. WEATHERPROOFING OF ANY
INSTALLATION BY TENANT MUST BE PERFORMED BY LANDLORD'S APPROVED ROOFING CONTRACTOR, AND TENANT'S GENERAL
CONTRACTOR SHALL PAY ALL SUCH COSTS.
11. TENANT'S GENERAL CONTRACTOR WILL BE REQUIRED TO PROVIDE TEMPORARY WEATHERPROOFING FOR ALL ROOF PENETRATIONS,
UNTIL LANDLORD'S ROOFING CONTRACTOR HAS MADE THE FINAL PATCH.
MII -I��I
lir=r
IP
I0I
MN
1 I
KIN -LINE txp#BCST -5/8
SWIVEL 85AM
R
5,P,I%ZO1Z
'
is
ROD CONNECTION DETAIL -STEEL NTS
SEQUENCE OF CONTROL
1. SELECTOR SWITCH IN "ON" POSITION, SYSTEM IS RUNNING.
A. OUTSIDE AIR TEMPERATURE ABOVE 60 DEG.
B.
1. OUTSIDE AIR DAMPER TO BE AT MINIMUM POSITION
(BALANCE TO 750 CFM FOR AHU -1)
2. RETURN AIR DAMPER FULLY OPEN.
3. ROOM THERMOSTAT MODULATES COOLING CYCLE
(HEAT PUMP) TO MAINTAIN 75 DEG. F.
OUTSIDE AIR TEMPERATURE BELOW 60 DEG. F.
1. COOLING CYCLE (HEAT PUMP) DE- ENERGIZED.
2. OUTSIDE AIR DAMPER FULLY OPEN.
3. RETURN AIR DAMPER FULLY CLOSED.
4. ROOM THERMOSTAT CYCLE SUPPLY FAN TO MAINTAIN
75 DEG. F.
5. WHEN OUTSIDE AIR DAMPER IS AT MINIMUM POSITION
RETURN AIR DAMPER FULLY OPEN AND ROOM
TEMPERATURE FALLS BELOW 70 'F, THERMOSTAT
SHALL ACTIVATE HEATING CYCLE (HEAT PUMP) TO
MAINTAIN ROOM TEMPERATURE OF 70 F.
C. SMOKE IS DETECTED.
1. A/C SYSTEM DE- ENERGIZED.
2. OUTSIDE AIR DAMPER FULLY CLOSED.
RECEIVED
DEC 3 0 2011
PERMIT CENTER
MECHANICAL GENERAL NOTES
1. ALL WORK SHALL COMPLY WITH ALL APPLICABLE FEDERAL, STATE AND LOCAL CODES,
LAWS, ACTS AND ALL AUTHORITIES HAVING JURISDICTION, AND LANDLORD'S CRITERIA.
2. THE COMPLETED INSTALLATION SHALL BE IN ACCORDANCE WITH ALL APPLICABLE INDUSTRY
STANDARDS OF GOOD PRACTICE AND SAFETY; AND THE MANUFACTURER'S STRICTEST
RECOMMENDATIONS FOR EQUIPMENT AND PRODUCT APPLICATION AND INSTALLATION.
3. THE CONTRACTOR SHALL OBTAIN AND PAY FOR ALL PERMITS, LICENSES, DOCUMENTS AND
SERVICES RELATED TO INSTALLATION OF THE WORK.
4. PRIOR TO SUBMITTING A PROPOSAL, THE CONTRACTOR SHALL VISIT THE SITE AND
THOROUGHLY INSPECT ALL EXISTING CONDITIONS TO INSURE THAT THE WORK REPRESENTED
ON THE DRAWINGS AND IN THESE SPECIFICATIONS CAN BE INSTALLED AS INDICATED.
5. DUCTWORK SHALL BE FABRICATED AND ERECTED IN ACCORDANCE WITH ASHRAE AND
LATEST SMACNA STANDARDS. PROVIDE TURNING VANES IN ALL ELBOWS; AND MANUAL
VOLUME DAMPERS IN ALL BRANCHES, SPLITTER DAMPERS, AIR EQUALIZERS, EXTRACTORS,
AND SIMILAR DEVICES WHEREVER NECESSARY TO PROPERLY BALANCE THE SYSTEM AND
PRODUCE A QUIET AND DRAFTLESS OPERATION.
6. SHEETMETAL DUCTWORK: PROVIDE SHEETMETAL DUCTWORK FABRICATED AND INSTALLED IN
ACCORDANCE WITH ASHRAE AND SMACNA STANDARDS, FOR 1" W.C. PRESSURE CLASS,
SEAL CLASS "A" SHEETMETAL SHALL BE GALVANIZED SHEET STEEL OF LOCK FORMING
QUALITY, WITH G90 ZINC COATING. SHEET STEEL SHALL COMPLY WITH ASTM A653
STANDARD SPECIFICATION FOR STEEL SHEETMETAL. ZINC COATED (GALVANIZED) OR
ZINC -IRON ALLOY- COATED (GALVANIZED) BY THE HOT DIP PROCESS, AND A924 STANDARD
SPECIFICATION FOR GENERAL REQUIREMENTS FOR SHEET, METALLIC - COATED BY THE HOT
DIP PROCESS. ALL ANGLE IRON USED FOR SUPPORT SHALL BE GALVANIZED. CONNECTIONS
TO WALLS OR FLOOR SHALL BE AIR TIGHT WITH ANGLE IRON AND CAULKING. SEAL ALL
DUCT SEAMS, TRANSVERSE AND LONGITUDINAL AIR TIGHT. PROVIDE TURNING VANES AL ALL
90'ELBOWS.
7. ROUND SHEETMETAL DUCT: PROVIDE SPIRAL SEAM (ALL SIZES) OR SNAP LOCK (DUCT
SIZES UP TO 10 ") GALVANIZED STEEL COMPLYING WITH SMACNA STANDARDS. SPIRAL SEAM
DUCTWORK SHALL HAVE SMACNA SEAM RL -1.
8. EXPOSED DUCTWORK: EXPOSED DUCTWORK SHALL BE CLEANED OF DEBRIS AND OIL, THEN
WIPED DOWN WITH VINEGAR OR OTHER SURFACE PREPARING CHEMICAL TO PREPARE DUCT
FOR PAINT.
9. DUCT SEALANT: PROVIDE POLYMERIC RUBBER TYPE SEALANT FOR USE ON BOTH INTERIOR
LOCATED DUCTWORK AND DUCTWORK EXPOSED TO OUTDOOR CONDITIONS. SEALER SHALL
HAVE HIGH BONDING STRENGTH FOR SURE. FIRST ITEM SEALING SYSTEM OF JOINTS IN LOW,
MEDIUM AND HIGH PRESSURE DUCT SYSTEMS. SEALER SHALL BE HIGH SOLID CONTENT.
PROVIDE A TWO PART TAPE SEALING SYSTEM, CONSISTING OF WOVEN FIBER TAPE
IMPREGNATED WITH A GYPSUM MINERAL COMPOUND, AND A MODIFIED ACRYLIC/ SILICONE
ACTIVATOR THAT REACTS EXOTHERMIC ALLY WITH THE TAPE. TWO PART TAPE SEALING
SYSTEM MUST BE RATED FOR BOTH INDOOR AND OUTDOOR APPLICATION. TAPE SHALL NOT
CONTAIN ASBESTOS.
10. DUCT LINER (ALL RECTANGULAR RETURN DUCT AND SUPPLY PLENUM): PROVIDE MINIMUM 1"
THICK, 3 PCF DENSITY, NEOPRENE COATED, LONG TEXTILE FIBER TYPE DUCT LINER, WITH
COATING ON THE AIR STREAM SIDE CONFORMING TO NFPA 90A, DUCT LINER ADHESIVE
SHALL BE AS RECOMMENDED BY DUCT LINER MANUFACTURER, AND SHALL COMPLY WITH
ASTM C -916. DUCT LINER FASTENERS SHALL COMPLY WITH SMACNA "HVAC DUCT
CONSTRUCTION STANDARDS ", LATEST EDITION. THERMAL CONDUCTIVITY SHALL BE EQUAL TO
OR LESS THAN 0.26 AT 75 %.
11. ROUND VOLUME DAMPERS: PROVIDE MINIMUM 20 GAUGE GALVANIZED STEEL FRAME AND
BLADES, MINIMUM 3/8" SQUARE STEEL AXLE, MOLDED SYNTHETIC BEARING, WITH LOCKING
POSITION REGULATOR. REGULATOR SHALL BE POSITIONED WITH SHEETMETAL BRACKET
BEYOND DUCT COVERING. WHERE POSITIONING REGULATOR IS NOT ACCESSIBLE, PROVIDE
COUPLING AND EXTENSION ROD WITH REGULATOR FOR CEILING OR WALL INSTALLATION, AS
REQUIRED.
12. RECTANGULAR VOLUME DAMPERS: PROVIDE MINIMUM 16 GAUGE GALVANIZED STEEL
CHANNEL FRAME, 16 GAUGE GALVANIZED STEEL BLADES, MINIMUM 1/2" HEXAGON AXLE,
BOLDED SYNTHETIC BEARINGS, WITH 3/8" SQUARE PLATED STEEL CONTROL SHAFT.
LINKAGES SHALL BE CONCEALED IN THE FRAME. OPERATING SHAFT SHALL EXTEND BEYOND
FRAME AND DUCT TO A LOCKING QUADRANT WITH ADJUSTABLE LEVER, MAXIMUM BLADE
WITH SHALL NOT EXCEED 6 ".
13. DUCT TURNING VANES: PROVIDE FABRICATED TURNING VANES AND VANE RUNNERS,
CONSTRUCTED IN ACCORDANCE WITH SMACNA "HVAC DUCT CONSTRUCTION STANDARDS ".
PROVIDE TURNING VANES CONSTRUCTED OF CURVED BLADES, SUPPORTED WITH BARS
PERPENDICULAR TO BLADES, AND SET INTO SIDE STRIPS SUITABLE FOR MOUNTING IN
DUCTWORK. FOLLOW SMACNA GUIDELINES FOR SPACING SUPPORT, AND CONSTRUCTION. ALL
BLADES SHALL BE DOUBLE THICKNESS AIRFOIL TYPE.
14. FLEXIBLE DUCT CONNECTOR TO EQUIPMENT: PROVIDE UL LABELED 30 OUNCE NEOPRENE
COATED FIBERGLASS FABRIC DUCT CONNECTORS AT THE DUCT CONNECTIONS TO ALL
VIBRATING EQUIPMENT.
15. FLEXIBLE DUCTWORK SHALL BE THERMAFLEX "M -KE" WITH ONE INCH EXTERNAL INSULATION
FINISHED WITH A VAPOR BARRIER, U.L. AND 90A LISTED, SHALL BE EQUIPPED WITH
DAMPER - EXTRACTOR AT THE SHEETMETAL DUCT AND CIRCULAR COLLAR AT 'THE' DIFFUSER,
MECHANICALLY SECURED.
16. FLEXIBLE DUCTWORK SHALL NOT EXCEED 5 FEET IN LENGTH; BENDS SHALL NOT. RESTRICT
THE INSIDE CROSS- SECTIONAL AREA OF THE DUCT; ANDCONNECTION SHALL BE MADE AS
DIRECT AS POSSIBLE TO THE MAIN SUPPLY.
17. ALL WORK SHALL BE LOCATED TO AVOID CONFLICTS WITH OTHER TRADES PROVIDE
ADEQUATE CLEARANCE FOR ARCHITECTURAL DESIGN, PROPER OPERATION AND SERVICE OF
EQUIPMENT.
18. PROVIDE A READY -TO -USE SYSTEM WITH ALL WORK GUARANTEED IN WRITING AGAINST
DEFECTIVE WORKMANSHIP AND MATERIALS FOR A PERIOD OF ONE YEAR FROM TURN OVER
TO OWNER.
19. CONDENSATE DRAINS: TYPE "M" HARD DRAWN COPPER FOR LINES 1" AND SMALLER,
"DWV" HARD DRAWN COPPER FOR 1 -1/4" AND LARGER, CONFORMING TO ASTM B88 -72.
WROUGHT COPPER FITTINGS, DRAINAGE TYPE FOR LINES 1 -1/4" AND LARGER. SOLDER WITH
50/50 SOLDER.
20. DUCTWORK SHALL BE "FACTORY MADE" CLASS 1 OR GALVANIZED SHEET METAL WITH IRON
SUPPORTS SECURED TO OVERHEAD MEMBERS AT 5' -0" DUCTWORK MATERIALS SHALL BE
PER INTERNATIONAL MECHANICAL CODE, 2009.
21. PROVIDE AS PART OF THE MECHANICAL CONTRACT SERVICES OF THE LANDLORD'S
APPROVED CERTIFIED AIR /WATER BALANCING CONTRACTOR: WIINAIRE, INC. (714)827 -9880
SUBMIT 3 COPIES OF THE BALANCE REPORT TO ARCHITECT /OWNER, ONE COPY TO THE
LANDLORD FOR APPROVAL AND ONE COPY TO THE ON -SITE CONTRACTOR WITHIN 15 DAYS
AFTER STORE OPENING. TEST AND ADJUST ALL MECHANICAL SYSTEMS AND EQUIPMENT TO
ASSURE PROPER BALANCE AND OPERATION. PERFORM TESTS IN ACCORDANCE WITH THE
MOST CURRENT NEBB OR AABC AND ASHRAE STANDARDS. ELIMINATE OBJECTIONABLE
NOISE AND VIBRATION, AND ASSURE PROPER FUNCTION OR CONTROLS. BALANCING
CONTRACTOR SHALL BE AN INDEPENDENT CERTIFIED TEST AND BALANCE CONTRACTOR,
WITH NEBB OR AABC CERTIFICATION. SUBMIT COMPLETED AND CERTIFIED TEST AND
BALANCE REPORT TO OWNER'S REPRESENTATIVE. BALANCE ALL SYSTEMS TO WITHIN 5% OF
AIR FLOWS INDICATED ON THE DRAWINGS, AND REPORT ALL DISCREPANCIES TO HVAC
INSTALLER FOR CORRECTION. MARK FINAL BALANCE POSITIONING ON DAMPERS WITH
PERMANENT MARKER.
22. PROVIDE DUCT SMOKE DETECTORS IN RA DUCTS, TO OVER RIDE UNIT AND PROVIDE
U I0 P• C • •F .•K
23. CONTRACTOR SHALL PROVIDE 0 & M MANUALS, RECORD DRAWINGS AND STAFF TRAINING
UPON COMPLETION OF CONSTRUCTION.
iLliI
NP MECHANICAL, INC.
• CONSULTING ENGINEERS
1717 W. NORTHERN AVE. - SUITE 116
PHOENIX, ARIZONA 85021
• (602) 249 -6311
PROJECT NO
PLOT DATE
11253
12 -29 -11
C13
a)
O
m
m ch
dJ N
N
to
LL
Q GLJ
OC
W
�j ^t 0
O
s M
l7 o
S Z N
SON
1- I-
w
x
V)
J
0
LU
• • • • • u •
a
a
1 57
Co
CO
L C
� � C
V0
ct
+-P
cD
La
-0 o�5
z o
C 0 CD
N cu
REVISIONS:
MPE
I2 -28 -II PER CITY OF TUKWILLA
EXPIRES 08/12/12
DATE:
12 -13 -11
DRAWN BY:
MPE
FILE NAME:
1= 2
PH11- 095 -M2
PROJECT NUMBER:
PH 11 -095
NJ