HomeMy WebLinkAboutPermit PG11-044 - KOTIS DESIGNKOTIS DESIGN
1165 ANDOVER PK W
PG1 1 -044
Parcel No.:
Address:
City oiTukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206 - 431 -3670
Inspectio n Request Line: 206- 431 -2451
Web site: http: //www.ci.tukwila.wa.us
PLUMBING /GAS PIPING PERMIT
3523049097
1165 ANDOVER PK W TUKW
Project Name: KOTIS DESIGN
Permit Number:
Issue Date:
Permit Expires On:
PG11 -044
03/21/2011
09/17/2011
Owner:
Name:
Address:
Contact Person:
Name:
Address:
Email:
Contractor:
Name:
Address:
WALTON CWWA SOUTHCENTER 4 L
C/O CTMT - WALTON RE TAX , 4678 WORLD PARKWAY CIR 63134
SAM ALMO
PO BOX 33370 , SEATTLE WA 98133
SAM@PRO-STAFFMECHANICAL.COM
Phone: 206 - 361 -0071
PRO STAFF MECHANICAL INC Phone: 206 - 361 -0071
PO BOX 33370 , SEATTLE WA 98133
Contractor License No: PROSTMI072NG
Expiration Date: 06/30/2012
DESCRIPTION OF WORK:
SUPPLY & INSTALL NEW 1 1/4" DIAMETER GAS PIPING TIED TO THE EXISTING GAS PIPING
ON THE ROOF DOWN TO THE NEW SPRINT DRYER. DISCONNECT & ABANDON ONE EXISTING
UNIT HEATER IN PLACE.
Value of Plumbing /Gas Piping:
Fees Collected:
Electrical Service Provided by:
$2,500.00 Uniform Plumbing Code Edition: 2009
$120.75 International Fuel Gas Code Edition: 2009
PUGET SOUND ENERGY
Permit Center Authorized Signature:
Date: �I f
I hereby certify that I have read and examined this permit and know the same to be true and correct. All provisions of law and ordinances
governing this work will be complied with, whether specified herein or not.
The granting of this pe o:. • presume to give authority to violate or cancel the provisions of any other state or local laws regulating
construction or th- •erfo • an •f work. I am authorized to sign and obtain this plumbing /gas piping permit and agree to the conditions
on the back of t s permit.
Signature: Date:
/11.
Print N� • c
This permit shall become null and void if the work is not commenced within 180 days from the date of issuance, or if the work is suspended
or abandoned for a period of 180 days from the last inspection.
doc: UPC -4/10 PG11 -044
Printed: 03 -21 -2011
PERMIT CONDITIONS
Permit No. PG 11 -044
1: ** *PLUMBING AND GAS PIPING * **
2: No changes shall be made to applicable plans and specifications unless prior approval is obtained from the Tukwila
Building Division.
3: All permits, inspection records and applicable plans shall be maintained at the job and available to the plumbing
inspector.
4: All plumbing and gas piping systems shall be installed in compliance with the Uniform Plumbing Code and the Fuel Gas
Code.
5: No portion of any plumbing system or gas piping shall be concealed until inspected and approved.
6: All plumbing and gas piping systems shall be tested and approved as required by the Plumbing Code and Fuel Gas Code.
Tests shall be conducted in the presence of the Plumbing Inspector. It shall be the duty of the holder of the permit to
make sure that the work will stand the test prescribed before giving notification that the work is ready for inspection.
7: No water, soil, or waste pipe shall be installed or permitted outside of a building or in an exterior wall unless,
adequate provision is made to protect such pipe from freezing. All hot and cold water pipes installed outside the
conditioned space shall be insulated to minimum R -3.
8: Plastic and copper piping running through framing members to within one (1) inch of the exposed framing shall be
protected by steel nail plates not less than 18 guage.
9: Piping through concrete or masonry walls shall not be subject to any load from building construction. No plumbing
piping shall be directly embedded in concrete or masonry.
10: All pipes penetrating floor /ceiling assemblies and fire- resistance rated walls or partitions shall be protected in
accordance with the requirements of the building code.
11: Piping in the ground shall be laid on a firm bed for its entire length. Trenches shall be backfilled in thin layers to
twelve inches above the top of the piping with clean earth, which shall not contain stones, boulders, cinderfill,
frozen earth, or construction debris.
12: The issuance of a permit or approval of plans and specifications shall not be construed to be a permit for, or an
approval of, any violation of any of the provisions of the Plumbing Code or Fuel Gas Code or any other ordinance of the
jurisdiction.
doc: UPC -4/10
PG 11 -044 Printed: 03 -21 -2011
CITY OF TUKA
Community Dgyelopment Department
Permit Center
6300 Southcenter Blvd., Suite 100
Tukwila, WA 98188
htto://www.ci.tukwila.wa.us
Plumbing/Gas Permit No. It l l 1 {
Project No.
(For office use only)
PL / GAS PIPING PERMIT APPLICATION
Applications and plans must be complete in order to be accepted for plan review.
Applications will not be accepted through the mail or by fax.
* *Please Print **
SITE LOCATION
A / King Co Assessor's Tax No.: 3S 2304- q 0 R7
Site Address: / / 65 � V 1(z Agit- WEST Suite Number: 3LP6 ��$�. Floor:
New Tenant: Yes do
Property Owners Name: Li AL-1-0 N C.v.IW Pr
Mailing Address: GD C ThT — Wpb* 12-G TIN-X 9-670 013 PMJL 4W Cs ra..
zin
Tenant Name:
koT1 s 1)ES) cno.)
City . tows sfrJo
CONTACT PERSON — Who do we contact when your permit is ready to be issued
Name: A'm Ata(Y o
Mailing Address: Po. c 33370
Day Telephone: 'Zo 6 36 1 "'a 07
SEAT WA- %.1,33
City n State Zip
E -Mail Address: c�7 1' D STh F'M �1 � � C� -Colima Fax Number: o6 s36r —o42y-
›higittrEGLGAS PIPING CONTRACTOR INFORMATION
Company Name: --S1 Tt'GF f\ti FCC-} {V Cpl— TC-.
Mailing Address: 17.o. 13 33 D
City
Day Telephone: 206--36 -0071
E -Mail Address: SAM a 1?►-0-'STRFF o1£Ut4,4%04... Cowl Fax Number: 1Z0b —3 61 —0 42. 4 -
Contractor Registration Number: P266TM X072..-M6 Expiration Date: 6 )30)24%2_
Contact Person: SAM- M-I ` -0
WA- ie)33
State Zip
CHITECT OF RECORD - All plans must be stamped by Architect of Record
Company Name: -�
Mailing Address:
City State Zip
t Person: Day Telephone:
Address: Fax Number:
Contact
NGINEER OF RECORD - All plans must be stamped by Engineer of Record
Name:
Mailing Address:
Contact Person:
E -Ma'
State Zip
Day
-Fax Number:
H: Applications\Porns- Applications On Line\2010 Applications \7 -2010 - Plumbing -Gas Piping Permit Applicationlloc
Revised: 7-2010
bh
Page 1 of 2
Valuation of Project (contractor's bid pS: $ $ 2,500. o V
10
Scope of Work (please provide detailed information): S1q " 1.-"( I N STALL NEW I `) 4 w _ o Ca ers
'' 1 S'; N G TIED TL' T1+E EX I STING G As PI 7/ N C, GN T►+F RoDDJG DOW t1
T o T » N,EW S I N'T DrZ'TO2 _ D,$LU NA) S r j 48RN'Dv 7J pUE Ex Is tI?*,
(AN I T HEAT-Ea— I N
Building Use (per Int'I Building Code):
Occupancy (per Int'l Building Code):
Utility Purveyor: Water: Sewer:
Indicate type of plumbing fixtures and/or gas piping outlets being installed and the quantity below:
Fixture Type:
I Qty
Fixture Type:
Qty
Fixture Type:
Qty
Fixture Type:
Qty
Bathtub or combination
bath/shower
Bidet
Clothes washer, domestic
Dental unit, cuspidor
Dishwasher, domestic,
with independent drain
Drinking fountain or
water cooler (per head)
Food -waste grinder,
commercial
Floor Drain
Shower, single head trap
Lavatory
Wash fountain
Receptor, indirect waste
Sinks
Urinals
Water Closet
Building sewer and each
trailer park sewer
Rain water system — per
drain (inside building)
Water heater and/or vent
Industrial waste treatment
interceptor, including trap
and vent, except for kitchen
type grease interceptors
Each grease trap
(connected to not more
than 4 fixtures - <750
gallon capacity)
Grease interceptor for
commercial kitchen ( >750
gallon capacity)
Repair or alteration of
water piping and/or water
treatment equipment
Repair or alteration of
drainage or vent piping
Medical gas piping
system serving 1 -5
inlets/outlets for a
specific gas
Each additional medical
gas inlets/outlets greater
than 5
Backflow protective
device other than
atmospheric -type vacuum
breakers 2 inch (51 mm)
diameter or smaller
Backflow protective device
other than atmospheric -type
vacuum breakers over 2
inch (51 mm) diameter
Each lawn sprinkler
system on any one meter
including backflow
protection devices
Atmospheric -type vacuum
breakers not included in
lawn sprinkler backflow
protections (1 -5)
Atmospheric -type
vacuum breakers not
included in lawn
sprinkler backflow
protections over 5
Gas piping outlets
1
PERMIT APPLICATION NOTES -
Value of Construction — In all cases, a value of construction amount should be entered by the applicant. This figure will be reviewed and is subject
to possible revision by the Permit Center to comply with current fee schedules.
Expiration of Plan Review — Applications for which no permit is issued within 180 days following the date of application shall expire by limitation.
The Building Official may grant one extension of time for an additional period not to exceed 180 days. The extension shall be requested in writing
and justifiable cause demonstrated. Section 3.4.3 Intemational Plumbing Code (current edition).
I HEREBY CERTIFY THAT I / AD AND EXAMINED THIS APPLICATION AND KNOW THE SAME TO BE TRUE UNDER
PENALTY OF PE' ' ' 1 L S OF THE STATE OF WASHINGTON, AND I AM AUTHORIZED TO APPLY FOR THIS PERMIT.
BUILDING OW R AUT 'O , ' : D AGENT:
Signature: ` Date: 3 /It o /
Print N
Mailing dress: ?ID - Rc37[ 3%3 70
Day Telephone:
City
ci2.t33
State Zip
Date Application Accepted:
Date Application Expires:
Staff Initials: -.
H:\Applications\ Forms - Applications On Line\2010 Applications \7 -2010 - Plumbing -Gas Piping Permit Application.doc
Revised: 7 -2010
bh
Page 2 of 2
•
City of Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206-431-3670
Fax: 206 - 431 -3665
Web site: http: //www.ci.tukwila.wa.us
Parcel No.: 3523049097
Address: 1165 ANDOVER PK W TUKW
Suite No:
Applicant: KOTIS DESIGN
RECEIPT
Permit Number: PG11 -044
Status: PENDING
Applied Date: 03/10/2011
Issue Date:
Receipt No.: R11 -00463
Initials:
User ID:
WER
1655
Payment Amount: $120.75
Payment Date: 03/10/2011 11:39 AM
Balance: $0.00
Payee: PRO -STAFF MECHANICAL
TRANSACTION LIST:
Type Method Descriptio Amount
Payment Check 12620 120.75
Authorization No.
ACCOUNT ITEM LIST:
Description
Account Code Current Pmts
GAS - NONRES
PLAN CHECK - NONRES
000.322.103.00.00 96.60
000.345.830 24.15
Total: $120.75
doc: Receiot -06 Printed: 03 -10 -2011
INSPECTION RECORD
Retain a copy with permit �' i y
INSPECTION NO. PERMIT NO. 44
CITY OF TUKWILA BUILDING DIVISION
6300 Southcenter Blvd., #100, Tukwila. WA 98188 • (206) 431 - 3670' • .•
Permit Inspection Request Line (206) 431 -2451
Projec .
6
Type of Inspection:
Address:
} A l // n tJ Gs
UV
Date Called:
u
Speci Y structions:
0 4 9 1----1 1 -- 6(
Date Wanted:
S (1,....-//
a.m.
i
Requester:
Phone No:
3
pproved per applicable codes. Corrections required prior to approval.
COMMENTS:
Df Ally
nspec 8r:
Date:((
REINSPECTION FEE REQUIRED. rior to next inspection..lee must be
paid at 6300 Southcenter Blvd.. Suite 100. Call to schedtite reinspection.
. •
•
•
•
•
•
INSPECTION NO.
INSPECTION RECORD
Retain a copy with permit 1' "/
PERMIT NO.
CITY OF TUKWILA BUILDING DIVISION
6300 Southcenter Blvd., #100, Tukwila. WA 98188
Permit Inspection Request Line (206) 431 -2451
(206) 431 -3670
Project:
/40T/S hA',, S IA Ai
Type of Inspection: '.J-
/A - r,J 445
Address:
//e....5- rf./Jca*'
•)
t-4,..1
Date Called:
Special Instructions:
�f
Lr'/1.1 Q {B1
Date Wanted:
y- / %
Requester:
Phone No:
.2-a. --.7cG -5.9-2 5
Approved per applicable codes. Corrections required prior to approval.
COMMENTS:
f
Lr'/1.1 Q {B1
i.? _ ii n(/
A / U _.:
✓
/MA I L \ f
..,--c. i s1(7 A
n
it(
,./e-�. .
,\ ,..
1
InsKtor:
Date: 4 4 it
❑ REINSPECTION FEE REQUIRED. Prior to next inspection. fee must be .
paid at 6300 Southcenter Blvd.. Suite 100. Gall to schedule reinspection.
. ti
FILE COPY
Kotis Design: Tukwila
GAS PIPE SIZING & INPUT RATINGS
TAG
APPLIANCE
SERVICE
BTU INPUT
(MBTU)
APPLIANCE
BRANCH LINE SIZE
UH -1 & 2
Existing
Unit Heater
Warehouse
150,000/Each
Existing 1"0
Sprint Dryer
New Textile
Gas D er
Sprint Dryer
Total
200,000
500,000
New 1'/4 "0
Gas Pine Notes:
1) Longest Max Pipe Length is Sprint Dryer @.240': X <_ 250'
2) The existing main size back to the meter is 2 "0.
3) Existing gas line system good for 704,000 Btu's per Table 402.4(2) in the 2009 IFGC.
?GUQ119
REVIEWED FOR
CODE COMPLIANCE
MAK i Q L;; i i
City ot Tukwila
BUILDING nIV1SION
RECEIVED
MAR '1 0 2011
PERMIT CENTER
GA— 2 Ptt3c
The industry's most efficient, innovative, and affordable
high- production textile gas dryer, Sprint 2000 is available in belt
widths from 122 to 183 cm (48" to 72 "). Not only does it have the
highest production capacity in its class, it's also the most energy
efficient. Heavy -duty thermal insulation prevents heat from
migrating into the workplace, while CoolSkin" technology leaves
the dryer skin cool to the touch. Fast cure rates and high product
throughput maximize dryer capacity and minimize per -unit cost.
Available in liquid propane (LP) or Natural Gas (NG), the
high- performance burners are designed with excess capacity that
far exceeds consumption rates under normal operating conditions.
Separate blowers control combustion, circulation, and exhaust.
A high - volume forced air system quickly brings the chamber
to the desired temperature, speeding the start of production.
Process temperatures and set temperatures are controlled
k OTIS D�st4N
GAS p1Pi_ + F ►.rs-
C 5 A NPaveg_ ?A In/ s-r
1)(2 l I-- o y LI
digitally. Temperature consistency is ensured by a fuzzy -logic
controller, which responds to ambient temperature changes by
keeping chamber heat within 1° of target temperature at the
thermocouple. A tower light shows when temperatures are within
user -set parameters. When readings fall outside those settings, a
temperature monitor issues visible and audible alarms. Entry and
exit openings are adjustable, and large, crowned rollers ensure
positive belt tracking. Digital speed readout makes it easy to
duplicate settings. An automatic shutdown sequence keeps the
blower and belt running until the chamber has cooled.
All equipment from The M &R Companies is built with M &R's
unsurpassed attention to detail and commitment to quality,
dtuability, innovation, and design excellence, and is backed by M &R's
unpil �� i ;,� r,::,�f,, vice, support, and premium parts.
screen printing equipment.
AmoonvEI
MAR 16 2011
RECEIVE
C' of Tukwila MAR 10 2011
City BUILDING DIVISION
www.mrprant:com
USk 800.7366431.Outside USk +847-067-4461
STANDARD FEATURES
tir'Narxliirg
• Enhanced airflow accelerates drying/curing .
• Exhaust tbkrwo evacuahes up to 50970 Vnun (1800 cfni)
High- volume circulation blower reduces energy costs`
• Stainless steel: filtersldes .nnt,for easy cleaning:.
:.Three separate dedicated blowers (combustion,
.emulation &.exhaust
• • CE & 01. complianrt Builtto specifications established
. by the European Committee for SFaidardiration• (CE)
and'Ihderwrrters dabotatories•YUU
CSA Certified. amt built to meetor exceed AGA & CGA
standards ::: •
Contrnl.Center
' • Automate shutdoirn,segoence keeps the blowerand
belt funning until trie.clramber leas cooled .. .
•1 oidrol panel fer. visibility and .aecess
• Digital Neypadwitb digital display
:• HeateffioieuciaYstem reduces operalrngexpenses by
,using nntgaingcombustion.. gas to heat incoming air
•Temperate e r *ores. visible and audible alarms
when:teadiirgs fall abide userapeafied parameters
Tower light..indicates when:temperatuns are within
user sa1olerances
CoinieyerSyt
•`Available with conveyor speeds.fasterthan the:::..
• standard rates listed..
Conveyer belt is madeof heat-resistant,
Teflon`- coated .fiberglass:
•. Digital bet speed real oui makes it easy to duplicate
speed settings .
• Dim tga:reliable, heavy- duty„vadable-speed DC motor.
• Large :anodized aluminum rollers are crowned for
positive bett:trackieg. • :
• Minimum belt speed: 91 cm (369 per minute
Design & Constriction
• Adjustableenby/eiptopenings,
• Air-cooled cabinet ensures tong life for electrical
components
•: Bearisigs are designed for high speeds and high
terapeiahrres
• Circuit tbn Akers alkimr easy-reset
• fdmustdrawer /aeosote catcher
• (earprofile. design nraed8 easier to:see.aver the dryer ..
• klodulardesign and specialized fasteners' make it
easy to attach :additional heat clamber unitr
FAD 131'irieiicy'
• Burners : are designed with eoress•capacitythat
farexceeds consumption rates tinder :normal
operating conditions • , ".. ,.
• CoolSkio°.teehnology leaves the dryer skin cool to
the:touch
OPTIONS
Air. sanding
•:AC variable -speed circulation blower
cConveyor.Systenp `.
• Conveyor extension sections are available in 122 cm
(481 increments
• Fast curing rates and high product throughput
maximize. dryer capacity and minimize per -unit cost
• Fuzzy -logic conhoHer ensures consistency by Peeping heat
*thin .1 °of target temperature the thermocouple
• Heavy dutythermal insulation prevents heat from
migrating into the Workplace
• .Pressurized vector air. knives:pouvide consistent and
uniform temperatures throughout the drying chamber
• Process temperature and set temperature are
displayed and controlled digitally ::
• Sprint 2000is. the most eier elficient&winitsclass
Reid .Chamber..
•:Burners are available war liquid Propane (1P) or
natural gas -010 .:::.,. ..
•.Direct-fuedturner is.maximuna=rated at 300000 Btu
�.
Double-wall construction
•.CaManded stud interior
Modular •: dular gas train.simptifies maintenance
Producltivity..
• Sprint 2000:has the highest production capacity in
its class. •
Warrai t y: Sennce'& Support
•:241troui:lrotlinels started 365 days a year
• Access to M&R's Training. Center .
• Two- ear.tirnted warranty
T.
ECIFICATIONS
k*
Sumir.NrNIY
HeatCdai6arShah .:.:
HeatChaiYer. Wgp ... .
Eoaamioe Haat.Modules
shedard IaIMIBaUad length
r. Length
Walt Blower Sjdem =s
122ianf481
217 cm (85.5)
160 cm.(63')
244.to 670 cal (87021Y) or.mam'
61. cm 1241
244cm (961
.73201097 cm (24'io 36').er more
30 cm V): 5097(11/min 11800 dm) 0 6 mm (I/41
8asaapd Size 254 cm (1")
LPAa6rd Sas lapel l4esame _93 mm Hg (5' w.c:)
• High -speed Conveyer system tai syecial'med graphics
and industrial .apprications. ...
• Split -belt Model with independent drives teatmes .
reversible direction and variable speed --- available on
models with belt widths of 152,cm -(609 or more
ti'
gry, X300 00D Btu AL
d ' 208230 V, , 5 . 3 1 0 .
4004,3 ph, 16A,50Hr,53kw:
it oil 1249 Odium! naiad Salim a 208290 V, 3ph 15/17 A,50/60 Hz 510 1
400 V, 3.ph, 9 A, 501$2,:5 kW. . .
sla140100etrt' 1678 kg:(3700lb)
152 cmg601
t 248 em.(97.5')
191 ion (75, ..
244to610 clear 0020') a.mom
61 cm.(24')
244 cm (951
732 to ' 7 cm (24' to 36) creme
30 970 /min (1800 cfm) 0 6 :mm (1/4:)
2.54cm .1
.93 mm Hg(5'w.c)
•
If incoming voltage diners from the voltage(s) listed in this brochure, calculate amperage accordingly. Other electrical
z Measured at the Exhaust Discharge Pat
' Static pressure
Normal usage varies, but is significantly lower than the stated maximum
Weight applies to models with a 244 cm (96') heat/expansion chamber
The M&R Companies
Neat Chime nee.
• 61 cm (24') infrared pre -heat module speeds.
throughput
•. Additional '61 cm (24') sections are available
•Cooling fart:mounted over outfeed
300 0008ta . .
2081230 t{ 3 ph, 22/21.A, 50/60 Hr, 5.310
400 V,3 ph, 16 A, 50 Hz, 5.3 kW
208/230 V, 3 ph, .(9/21 A, 50/60 Hz, 62 kW
400 V, 3:ph, I1 A, 50114 6210
1860 kg.(4100lb) .
:183 worn
278 car (10931
22lcm (871
24440.610 cm (8'0 201 or mono
.61 cm (24')
244 cni f96')
732 to 1097 cm (24' to 36) or more
30 cm (1,0:'50970 /min .(1800 dui) 0 6. mm (1/4')
2.54 an (1').
.93 mm11g45"w.i: • • j'
300000800
208/230V, 3 ph, 22/21 /450/60 Ha 5.3 kW
400 V,3p11,16A,50 Hz, 5.3IN
208/'230 V, 3.pb, 2123 A, 50/60 Hz, 7.410
400 V,3 all, 13A,50 Hz, 7.410
2177 kg (48001b) .
configurations are available: Contact The M &R Companies fa details.
The MAR Companies 1 N.372 MStreet, GM Ellyn, Mineis 60137 -3576 USA
USA: 800. 736.6431 / 630. 858.61011 Fax: 630.8586134 • Outside USA: +847 - 967.4461 / Far +847- 967-0417
r6R Prieaex f boner, 0/t aM itr akidiuMa Mmeivae AM/1), feline the talwm,aee i tldc adnafwmem to be aesmt, at p,aikaan,, *wee d Nu ore[ Wee 0, gist ax weeilm•iex eat *macaw tinware, w Aegis
it muse 6Ya r "eerie[ boon arm edeiems w i s a a a a c r . was menu we 2 t 0, dale idiot malice sae mere* disdain a• Netiib+erdamages, tauepegim r voAUM, 1mm poem, metemaan.
MAR•NUARC•AMSCOMATIC :�jmwendliiiwtde MUwmd� 0f° 0e�'° mBn gfo mntme. Alideeau ember nmmieiapidfmmamielma ,meemere.aai rmewemgyesgmdirno
cegride sros Aaanida raaipnmc, � w rare armored. mares
E90
11 000
OVEN
SECT.
6'
CLEANING
AXES OCR
BURNBER
SECTION
4'
REV'14o'1 FROM No. I TO No.
OVEN
SECT.
1
NID
EXHAUST
6' OR
6-1/4'
L _
VALID MACHIEE
ENO
9000
EXHAUST
SUMER
12' CIA.
MOOD
EXIA 6T
6' DIA
8 -I/8'
MA19 C[NTR(L
o A PANEL.
1111111111111111111111111111111111111111111111 n 1..1111111111111111111111111
12'
TOP VIEV
REVISIONS
ENG, CHANGE NOTICE No, 1 OATE (CHANGE BY
BELT TRAVEL
RIOT1 TO LEFT
NOTE:
FOR OPPOSITE BELT DIRECTION USE
MIRROR IMAGE OF TOP AND FRONT VIEW
28 3'8'
8'
INFEEO
ELECTRIC
POV9t SO'P.
NOTE: DO NOT BRING UTILITIES, (GAS, VENTILATIONS, ELECTRICAL)
UNTIL DRYER IS SPOTTED IN PLACE ON PRODUCTIONS FLOOR
FR1NT VIEV
5' 5-T/8'
C04I1G FANS
FIR ELECTRICAL
[ERIS
5- /8'
1111111111111111111111111111111111111111:.. 11111111I111111111111111111111IMII111n111111
5-3/4'
RAIN
ODER
THIS CRAND& WAR SPECIFICATION IS TIE
PROPERTY ff M & R PRINTIID EWIPIENT 1K.
IT 1S 1SSIEO IN STRICT CUFICENEE AID
SHALL NIT BE REFROCIEEO, DIED CR
DISCLOSED 10 CYDERS CR 1780 AS 110 BASIS
FUR TIE MANFAC1IRE IR SALE IF APPARATUS
111H011 TIE PERNESSIIN IF TIE MR,
Nt1 ]91117100 9901719(17, 1137.
I N. 372 (bin Street
Glen EIIYn, IUWI *15 E0171
NACHI3E NAME
60" SPRINT 2000 & HO 12' HEAT
8' INFEED 8' DUTFEED
GRAVING 30. Sd2k60- 12-8 -8
Exhaust
Vent
Front Door /Stairs
•
Receiving
NORTH
Sprint
Dryer
Receiving
Zone
•_ .... _.. .. m. x •
PLAN REVIEW /ROUTING SLIP
ACTIVITY NUMBER: PG11 -044 DATE: 03 -10 -11
PROJECT NAME: KOTIS DESIGN
SITE ADDRESS: 1165 ANDOVER PK W
X Original Plan Submittal Response to Incomplete Letter #
Response to Correction Letter #
Revision # After Permit Issued
DEPARTMENTS:
BL_ A4,0C
uilding Division
Public Works ❑
Fire Prevention
Structural
n
Planning Division
n Permit Coordinator
DETERMINATION OF COMPLETENESS: (Tues., Thurs.)
Complete
Comments:
Incomplete
DUE DATE: 03-15-11
Not Applicable
Permit Center Use Only
INCOMPLETE LETTER MAILED: LETTER OF COMPLETENESS MAILED:
Departments determined incomplete: Bldg ❑ Fire ❑ Ping ❑ PW ❑ Staff Initials:
TUES/THURS ROUTING:
Please Route Structural Review Required
REVIEWER'S INITIALS:
No further Review Required
DATE:
APPROVALS OR CORRECTIONS:
Approved El
with Conditions Not Approved (attach comments) ❑ )(I Notation:
REVIEWER'S INITIALS: DATE:
DUE DATE: 04-12-11
Permit Center Use Only
CORRECTION LETTER MAILED:
Departments issued corrections: Bldg ❑ Fire ❑ Ping ❑ PW ❑ Staff Initials:
Documents /routing slip.doc
2 -28 -02
Contractors or Tradespeople Printer Friendly Page
•
General /Specialty Contractor
A business registered as a construction contractor with L&I to perform construction work within the scope of
its specialty. A General or Specialty construction Contractor must maintain a surety bond or assignment of
account and carry general liability insurance.
Business and Licensing Information
Name PRO STAFF MECHANICAL INC UBI No. 601038859
Phone 2063610071 Status Active
Address Po Box 33370 License No. PROSTMI072NG
Suite /Apt. License Type Construction Contractor
City Seattle Effective Date 8/7/1993
State WA Expiration Date 6/30/2012
Zip 98133 Suspend Date
County King Specialty 1 General
Business Type Corporation Specialty 2 Unused
Parent Company
Other Associated Licenses
License
Name
Type
Specialty 1
Specialty 2
Effective
Date
Expiration
Date
Status
PROSTHA136NJHEATINGContractor
PRO
STAFF
& A/C
INC
Construction
Air
Conditioning
Commercial/ Industrial/Refrig
8/11/1987
8/7/1993
Archived
Business Owner Information
Name
Role
Effective Date
Expiration Date
ALMO, LEONARD LEE
President
08/07/1993
Bond Amount
ALMO, PENNY H
Vice President
08/07/1993
799707C
Bond Information
Page 1 of 2
Bond
Bond Company Name
Bond Account Number
Effective Date
Expiration Date
Cancel Date
Impaired Date
Bond Amount
Received Date
8
DEVELOPERS SURETY
& INDEM CO
799707C
01/14/2009
Until Cancelled
$12,000.0001/26
/2009
7
TRAVELERS CAS ft
SURETY CO
103645389
08/07/2001
Until Cancelled
03/05/2009
$12,000.0007/30
/2001
Assignment of Savings Information No records found for the previous 6 year period
Insurance Information
Insurance
Company Name
Policy Number
Effective Date
Expiration Date
Cancel Date
Impaired Date
Amount
Received Date
14
SAFECO INS CO
OF AMERICA
26CC00695110
06/30/2010
06/30/2011
$1,000,000.00
06/23/2010
13
NORTH PACIFIC
INS CO
C08153327
06/30/2005
06/30/2010
$1,000,000.0006
/10/2009
12
NORTH PACIFIC
INS CO
CO2153327
06/30/2004
06/30/2005
$1,000,000.0006
/04/2004
Summons /Complaint Information
Cause
County
Complaint
Judgment
Status
Payment
Paid By
07 -2- 27030 -2
SPACE NEEDLE LLC
InterPlead: No
KING
Date: 08/22/2007
Amount: $0.00
Date:
Amount: $0.00
Open
Date:
Amount:
https://fortress.wa.gov/lni/bbip/Print.aspx
03/21/2011