Loading...
HomeMy WebLinkAboutPermit M10-111 - KING COUNTY DEPARTMENT OF TRANSPORTATIONKING COUNTY DEPARTMENT OF TRANSPORTATION 12100 EAST MARGINAL wys M10 -111 City eiTukwila Department of Community Development 6300 Southcenter Boulevard, Suite #100 Tukwila, Washington 98188 Phone: 206 - 431 -3670 Inspection Request Line: 206 - 431 -2451 Web site: http: / /www.ci.tukwila.wa.us MECHANICAL PERMIT Parcel No.: 7340600421 Address: 12100 EAST MARGINAL WY S TUKW Project Name: KING COUNTY DEPARTMENT OF TRANSPORTATION Permit Number: M10 -111 Issue Date: 10/20/2010 Permit Expires On: 04/18/2011 Owner: Name: KING COUNTY Address: 500 K C ADMIN BLDG , SEATTLE WA 98104 Contact Person: Name: KEN EISENHUT Address: 8110 7TH AV S , SEATTLE WA 98108 Email: KENE @ANTHONYCONSTRUCTION.COM Phone: 206 - 762 -3780 Contractor: Name: ANTHONY CONSTRUCTION CO INC Phone: 206 762 -3780 Address: 8110 7TH AVENUE SOUTH , SEATTLE, WA 98108 -4374 Contractor License No: ANTHOCC 116BT Expiration Date: 09/01 /2011 DESCRIPTION OF WORK: BACKUP GENERATOR REPLACEMENT. UPGRADE AND RELOCATE 150 KW GENERATOR AND .ASSOCIATED FUEL PIPE. REMOVE EXISTING GENERATOR AND TURN OVER TO KING COUNTY Value of Mechanical: $50,000.00 Type of Fire Protection: UNKNOWN Permit Center Authorized Signature: Fees Collected: $796.06 International Mechanical Code Edition: 2009 Date: 1,0 �)( I hereby certify that I have read and examined this permit and know the same to be true and correct. All provisions of law and ordinances governing this work will be complied with, whether specified herein or not. The granting of this permit does not presume to give authority to violate or cancel the provisions of any other state or local laws regulating construction or the performance of work. I am authorized to sign and obtain this mechanical permit. Date: /6 v/Q This permit shall become null and void if the work is not commenced within 180 days from the date of issuance, or if the work is suspended or abandoned for a period of 180 days from the last inspection. doc: IMC -4/10 M10 -111 Printed: 10 -20 -2010 City of Tukwila Department of Community Development 6300 Southcenter Boulevard, Suite #100 Tukwila, Washington 98188 Phone: 206-431-3670 Fax: 206 - 431 -3665 Web site: htq,://www.ci . tukwi la. wa. us PERMIT CONDITIONS ParcelNo.: 7340600421 Permit Number: M10 -111 Address: 12100 EAST MARGINAL WY S TUKW Status: ISSUED Suite No: Applied Date: 08/09/2010 Tenant: KING COUNTY DEPARTMENT OF TRANSPORTATION Issue Date: 10/20/2010 1: ** *BUILDING DEPARTMENT CONDITIONS * ** 2: No changes shall be made to the approved plans unless approved by the design professional in responsible charge and the Building Official. 3: All mechanical work shall be inspected and approved under a separate permit issued by the City of Tukwila Permit Center (206/431 - 3670). 4: All permits, inspection records, and approved plans shall be at the job site and available to the inspectors prior to start of any construction. These documents shall be maintained and made available until final inspection approval is granted. 5: The special inspections and verifications for concrete construction shall be required. 6: The special inspection of bolts to be installed m concrete prior to and during placement of concrete. 7: When special inspection is required, either the owner or the registered design professional m responsible charge, shall employ a special inspection agency and notify the Building Official of the appointment prior to the first building inspection. The special inspector shall furnish inspection reports to the Building Official in a timely manner. 8: A final report documenting required special inspections and correction of any discrepancies noted in the inspections shall be submitted to the Building Official. The final inspection report shall be prepared by the approved special inspection agency and shall be submitted to the Building Official prior to and as a condition of final inspection approval. 9: All construction shall be done in conformance with the approved plans and the requirements of the International Building Code or International Residential Code, International Mechanical Code, Washington State Energy Code. 10: Remove all demolition rubble and loose miscellaneous material from lot or parcel of ground, properly cap the sanitary sewer connections, and properly fill or otherwise protect all basements, cellars, septic tanks, wells, and other excavations. Final inspection approval will be determined by the building inspector based on satisfactory completion of this requirement. 11: Manufacturers installation instructions shall be available on the job site at the time of inspection. 12: All plumbing and gas piping work shall be inspected and approved under a separate permit issued by the City of Tukwila Building Department (206- 431- 3670). 13: All electrical work shall be inspected and approved under a separate permit issued by the City of Tukwila Building Department (206- 431 - 3670). 14: VALIDITY OF PERMIT: The issuance or granting of a permit shall not be construed to be a permit for, or an approval of, any violation of any of the provisions of the building code or of any other ordinances of the City of Tukwila. Permits presuming to give authority to violate or cancel the provisions of the code or other ordinances of the City of Tukwila shall not be valid. The issuance of a permit based on construction documents and other data shall not prevent the Building Official from requiring the correction of errors in the construction documents and other data. doc: Cond -10/06 M10 -111 Printed: 10 -20 -2010 City of Tukwila Department of Community Development 6300 Southcenter Boulevard, Suite #100 Tukwila, Washington 98188 Phone: 206-431-3670 Fax: 206 - 431 -3665 Web site: http. //www.ci.tukwila.wa.us 15: ** *FIRE DEPARTMENT CONDITIONS * ** 16: The attached set of building plans have been reviewed by the Fire Prevention Bureau and are acceptable with the following concerns: 17: Generator installation shall comply with NFPA 30 Chapter 22, NFPA 110, NFPA 111, NFPA 37, and manufacturers installation guidelines. 18: The maximum allowable quantity of diesel fuel per control area in a sprinklered building is 240 gallons. Quantities exceeding this amount must be stored in a H -3 Occupancy. ( IFC Table 2703.1(1).) 19: The diesel storage tank must comply with International Fire Code 3404 for storage of flammable /combustible liquids. 20: A minimum of one approved portable fire extinguisher complying with Section 906 of the International Fire Code and having a rating of not less than 20 -B shall be located not less than 10 feet (3048 mm) or more than 50 feet (15240 nun) from any Class 1 or 2 liquid storage area located outside of a liquid storage room. (IFC 3404.3.7.5.2) 21: Portable fire extinguishers, not housed in cabinets, shall be installed on the hangers or brackets supplied. Hangers or brackets shall be securely anchored to the mounting surface in accordance with the manufacturer's installation instructions. Portable fire extinguishers having a gross weight not exceeding 40 pounds (18 kg) shall be installed so that its top is not more than 5 feet (1524 mm) above the floor. Hand -held portable fire extinguishers having a gross weight exceeding 40 pounds (18 kg) shall be installed so that its top is not more than 3.5 feet (1067 mm) above the floor. The clearance between the floor and the bottom of the installed hand -held extinguishers shall not be less than 4 inches (102 mm). (IFC 906.7 and IFC 906.9) 22: Fire extinguishers shall not be obstructed or obscured from view. In rooms or areas in which visual obstruction cannot be completely avoided, means shall be provided to indicate the locations of the extinguishers. (IFC 906.6) 23: Extinguishers shall be located in conspicuous locations where they will be readily accessible and immediately available for use. These locations shall be along normal paths of travel, unless the fire code official determines that the hazard posed indicates the need for placement away from normal paths of travel. (IFC 906.5) 24: Fire extinguishers require monthly and yearly inspections. They must have a tag or label securely attached that indicates the month and year that the inspection was performed and shall identify the company or person performing the service. Every six years stored pressure extinguishers shall be emptied and subjected to the applicable recharge procedures. If the required monthly and yearly inspections of the fire extinguisher(s) are not accomplished or the inspection tag is not completed, a reputable fire extinguisher service company will be required to conduct these required surveys. (NFPA 10, 4 -3, 4 -4) 25: Contact The Tukwila Fire Prevention Bureau to witness all required inspections and tests. (City Ordinances #2050 and #2051) 26: Any overlooked hazardous condition and/or violation of the adopted Fire or Building Codes does not imply approval of such condition or violation. 27: These plans were reviewed by Inspector 511. If you have any questions, please call Tukwila Fire Prevention Bureau at (206)575 -4407. * *continued on next page ** doc: Cond -10/06 M10 -111 Printed: 10 -20 -2010 City of Tukwila Department of Community Development 6300 Southcenter Boulevard, Suite #100 Tukwila, Washington 98188 Phone: 206 - 431 -3670 Fax: 206 -431 -3665 Web site: hto://www.ci.tukwila.wa.us I hereby certify that I have read these conditions and will comply with them as outlined. All provisions of law and ordinances governing this work will be complied with, whether specified herein or not. The granting of this permit does not presume to give authority to violate or cancel the provision of any other work or local laws regulating construction or the performance of work. Signature: Print Name: / / i e S / it t " t - 2 Date: /G/ a /C.) doc: Cond -10/06 M10 -111 Printed: 10 -20 -2010 • CITY OF TUKWILA Community Development Department Permit Center 6300 Southcenter Blvd., Suite 100 Tukwila, WA 98188 htto://www.atukwila.wa.us Mechanical Permit No. K(0--- til Project No. (For office use only) MECHANICAL PERMIT APPLICATION Applications and plans must be complete in order to be accepted for plan review. Applications will not be accepted through the mail or by fax. * *please print ** SITE LOCATION Site Address: /2 /00 E.4ST "%.¢.e9iy.4-/ k/4y 5040sh Tenant Name: Property Owners Name: t<iA Mailing Address: Zo/ S-he, e/ Ms - -r12 - o 435- King Co Assessor's Tax No.: 7 3H Suite Number: New Tenant: Floor: ❑ Yes ® .. No City State QS/044 Zip CONTACT PERSON — who do we contact when your permit is ready to be issued Name: G 'Etki ETSe..Qh Mailing Address: S I i 0 '74* .4Ve S Day Telephone: Z0(o- 77Z- 37 Erb Se. Ke_ &9.4„ 9£flag- City State Zip E -Mail Address: t4 Nt Q,thSorvyCo.us7ZG.L77t1.y/. Fax Number: Z c-7(o4 - &((o1 MECHANICAL CONTRACTOR INFORMATION Company Name: Antkki,o+.3y Con ,srpe,..ci4cb4 D ..ty Mailing Address: %// I 746' Ave SoLel-yi SG.4 i,e City Contact Person: 4.0 ESL'.. %ZkT E -Mail Address:1<We. £Qiu*ioi/yCo.v5 rxe.eC77txl. C'-otil Contractor Registration Number: A#Tr//oCal/ to L37 State 9i'r /0R- Zip Day Telephone: Zoto - 7(o Z- 3 7dro Fax Number: 2P42 — 7tok - & 4 , Expiration Date: / / / //0 ARCHITECT OF RECORD — All plans must be stamped by architect of record Company Name: Mailing Address: City Contact Person: Day Telephone: Fax Number: E -Mail Address: State Zip ENGINEER OF RECORD — All plans must be stamped by engineer of record Company Name: .1.1....13A-1 45 c 14-'7 S, Zip( -, Mailing Address: /t 3O 4g%S71eiv3e.r goA4 fk- 330 5e44-64-4 City Contact Person: )V,$1 / 7Lie /O.S ,'r S/A T /IS E -Mail Address: H:\Applications\Forms- Applications On Line\2010 Applications \7.2010 - Mechanical Permit Application.doc Revised: 7 -2010 bh /414. State Zip Day Telephone: Z0( — 24-3 - SbZ2 Fax Number: Z0 b - 143 " Page 1 of 2 • • Valuation of project (contractor's bid price): $ OOo ° —° Scope of work (please provide detailed information): *de/ it /Cr.*rt /So K.J 6 e i4e .e .ad i 41' W 1L e/ A;dQ it'l moVt £ % 577)9 ►4 i¢.+d iri eiv afeet ,e seaou, . Use: Residential: New ❑ Replacement ❑ Commercial: New ❑ Replacement ❑ Fuel Type: Electric ❑ Gas ❑ Other: Indicate type of mechanical work being installed and the quant'ty below: Unit Type: Qty Unit Type: Qty Unit Type: Qty Bioler /Compressor Qty furnace <100k btu air handling unit >10,000 cfm fire damper 0 -3 hp /100,000 btu furnace >100k btu evaporator cooler diffuser 3-15 hp /500,000 btu floor furnace ventilation fan connected to single duct thermostat 15 -30 hp /1,000,000 btu suspended/wall/floor mounted heater ventilation system wood/gas stove 30 -50 hp /1,750,000 btu appliance vent hood and duct emergency generator / / 50+ hp /1,750,000 btu repair or addition to heat/refrig/cooling system Incinerator – domestic ethe mechanical equipp ment air handling unit <10,000 cfm incinerator – comm/ind PERMIT APPLICATION NOTES - Value of construction — in all cases, a value of construction amount should be entered by the applicant. This figure will be reviewed and is subject to possible revision by the permit center to comply with current fee schedules. Expiration of plan review — applications for which no permit is issued within 180 days following the date of application shall expire by limitation. The building official may grant one extension of time for additional periods not to exceed 90 days each. The extension shall be requested in writing and justifiable cause demonstrated. Section 105.3.2 international building code (current edition). I HEREBY CERTIFY THAT I HAVE READ AND EXAMINED THIS APPLICATION AND KNOW THE SAME TO BE TRUE UNDER PENALTY OF PERJURY BY THE LAWS OF THE STATE OF WASHINGTON, AND I AM AUTHORIZED TO APPLY FOR THIS PERMIT. BUILDING OWNER OR AUTHORIZED AGENT: Signature: Print Name: Gift �l Mailing Address: SI 0 7441 ,&4-e Soo*, Day Telephone: fegailk City Date: e3V9l/0 21)6- 7 (02- 37&o State Zip Date Application Accepted: (� _ q ` 0 Date Application Expires: t f Staff Initials: IA,t /1 H:\Applicntions \Forms - Applications On Line\2010 Applications \7 -2010 - Mechanical Permit Application.doc Revised: 7 -2010 bh Page 2 of 2 City of Tukwila Department of Community Development 6300 Southcenter Boulevard, Suite #100 Tukwila, Washington 98188 Phone: 206- 431 -3670 Fax: 206 - 431 -3665 Web site: http: / /www.TukwilaWA.gov RECEIPT Parcel No.: 7340600421 Permit Number: M10 -111 Address: 12100 EAST MARGINAL WY S TUICW Status: ISSUED Suite No: Applied Date: 08/09/2010 Applicant: KING COUNTY DEPARTMENT OF TRANSPORTATION Issue Date: 10/20/2010 Receipt No.: R11 -01765 Initials: LAW User ID: 1632 Payment Amount: $63.00 Payment Date: 08/15/2011 11:44 AM Balance: $0.00 Payee: ANTHONY CONSTRUCTION COMPANY INC TRANSACTION LIST: Type Method Descriptio Amount Payment Check 50059 63.00 Authorization No. ACCOUNT ITEM LIST: Description Account Code Current Pmts MECHANICAL - NONRES 000.322.102.00.00 63.00 Total: $63.00 doc: Receiot -06 Printed: 08 -15 -2011 • City of Tukwila Department of Community Development 6300 Southcenter Boulevard, Suite #100 Tukwila, Washington 98188 Phone: 206-431-3670 Fax: 206 - 431 -3665 Web site: http: //www.ci.tukwila.wa.us RECEIPT ParcelNo.: 7340600421 Permit Number: M10 -111 Address: 12100 EAST MARGINAL WY S TUKW Status: PENDING Suite No: Applied Date: 08/09/2010 Applicant: KING COUNTY DEPARTMENT OF TRANSPORTATION Issue Date: Receipt No.: R10 -01525 Payment Amount: $796.06 Initials: WER Payment Date: 08/09/2010 11:11 AM User ID: 1655 Balance: $0.00 Payee: ANTHONY CONSTRUCTION COMPANY INC TRANSACTION LIST: Type Method Descriptio Amount Payment Check 1555 796.06 Authorization No. ACCOUNT ITEM LIST: Description Account Code Current Pmts MECHANICAL - NONRES PLAN CHECK - NONRES 000.322.102.00.00 636.85 000.345.830 159.21 Total: $796.06 PYME11 RECFIVFi7 doc: Receiot -06 Printed: 08 -09 -2010 } t 3 INSPECTION RECORD Retain a copy with permit INSPECTION NO. PERMIT NO. CITY OF TUKWILA BUILDING DIVISION 6300 Southcenter Blvd., #100, Tukwila. WA 98188 VL (206) 431 -367 Permit Inspection Request Line (206) 431 -2451 Projec J D Type of lns t me.e. A' Addrre� s: �y Lt0 0 • ! �,� r 0( i�+la4 Al Date Called: C..°AC.� Special Instructions: . kW', Date Wanted q � 1' t .m.. pm. Requester: Phone No: Gv --193 -33ff Approved per applicable codes. Corrections required prior to approval. COMMENTS: er m; -r- boacptetr InspeEto' r: If—— REINSPECTION FEE REQUIR . P for to next inspection. fee must be paid at 6300 Southcenter Blv ., Suite 100. Call to schedule reinspectioh. INSPECTION RECORD Retain a copy with permit INSPECTION NO. PERMIT NO. 12"e' CITY OF TUKWILA BUILDING DIVISION 6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431 -3670 Permit Inspection Request Line (206) 431 -2451 Pr j ct: Type o nspectjpn;, b'l 6t ,A e ,], r� pv� Address: (0Q / / i r D tee�Called: Special Instructions: r 2(-70 �v Date Wanted :3 r 2 i_ 1/ / p.m. IA LPAte/ Requester: Phone / _ - '7 q-3 -5c3 E,J LJ Approved per applicable codes. Corrections required prior to approval. COMMENTS: Insp ctor: /� REINSPECTION FEE REQUIRED. Prior to next inspection. fee must be paid at 6300 Southcenter Blvd.. Suite 100. Call to schedule reinspection. Date 4 INSPECTION NUMBER INSPECTION RECORD Retain a copy with permit PYI /'- 1/1 PERMIT NUMBERS CITY OF TUKWILA FIRE DEPARTMENT 444 Andover Park East; Tukwila, Wa. 98188 206 -575 -4407 Project: k'•'" 9 ' .., --4 -1y -4 Type of Inspection: r .-� Address: /a /mod Suite' #: et" se' rs , Contact Person: `'l' It--..ti Special Instructions: Pre -Fire: Phone No.: 2v6 -'762- J7 &•d Approved per applicable codes. Corrections required prior to approval: COMMENTS: Sprinklers: Hrs.: Fire Alarm: Hood & Duct: / Monitor: Pre -Fire: Permits: 9 T 6.4;.,./ /rot °y+,,.z uG A)4 3. r4. t 1 5c Lr c `� d,.:,.� ..-/ > 'y/ C3,4%--1-- j7 ,er ice. -a.,+ - A ■14..4 , 4... -.1< 44 e Ar.., . -./ , Needs Shift Inspection: Sprinklers: Hrs.: Fire Alarm: Hood & Duct: / Monitor: Pre -Fire: Permits: Occupancy Type: . Inspector: rm,, 3 Date: /2/1 y /,/ Hrs.: n $100.00 REINSPECTION FEE REQUIRED. You will receive an invoice from the City of Tukwila Finance Department. Call to schedule a reinspection. Billing Address .J Attn: 1 Company Name: Address: City: 1 State: 1 Zip: Word /Inspection Record Form.Doc 6/11/10 T.F.D. Form F.P. 113 • • King County Department of Transportation Metro Transit Division Design and Construction Section 201 S. Jackson Street KSC-TR -0433 Seattle, WA 98104 -3856 July 7, 2011 FILE COPY Parmlt No. Ken Eisenhut, Project Manager Anthony Construction Company, Inc. 8110 7` Avenue South Seattle, WA, 98108 -4374 Contract C00412C09, WO. 1H South Base Fuel Wash Generator Replacement Single Wall Day Tank Used As Diesel Oil Return Air Gap The South Base Fuel Wash Generator replacement project design includes a Diesel Oil Return (DOR) line from the generator day tank to the underground storage tanks (UST). The return line uses a small (less than 1.5 GPM) pump to draw the diesel oil from the generator day tank into the Fuel Wash building. At the fuel building the fuel enters an air gap that allows the diesel to return to the UST via gravity. The air gap consists of 50 gallon single wall day tank with a drain at the bottom. The drain returns to the UST and remains open. The single wall day tank is only used as an air gap and does not store diesel oil. The Fuel Wash building fueling area floor under the designed air gap slopes to four (4) floor drains that connect to the oil -water separator. Oil skimmed from the separator drains to a waste oil tank. Attached drawings M50 and M401 show the floor drains and the piping to the oil -water separator. Drawing M50 shows the drains and piping as installed in the original construction and M401 shows the updates to the oil -water separator and waste oil tank. The oil -water separator and waste oil tank capacity far exceed the 50 gallon volume of the single wall tank used as an air gap. The Fuel Wash building is protected by fire sprinklers through out the building. The sprinkler system connects to the water utility for a continuous water supply. The drawing, from Automatic Sprinkler Corporation, that illustrates the system is also attached. If you have any questions please call Lyle McFarland at (206) 684 -1934. -Sincerely REVIEWED,F CODE CO MO APPRO.(' AUG 1 le21y1;�Far1. PE, Project Engineer �j HIV, CrrIR �F 111 JUL 2 5 2011 PERMIT CENTER City of Tukwila BUILDING DIVISION ?EVISION N0. i In-Ill TRAMONT CORPORATION PRICE QUOTATION Quote Number: AB11 -397 To: Anthony Constructino Co. Attn: Ken Eisenhut Job Ref: King County Transportation. Phone: 206.762.3780 Email: dora @anthonyconstruction.com Date: 03/30/2011 Description: Tramont UTRX- 50 gallon day tank system. UL 142 LISTED Approximate weight: 114 lbs. Width Length Height Emergency Ven( Tank 24.00 18.00 31.00 2" NPT Basin (optiona N/A N/A IMPORTANT: This tank is designed to be the main fuel storage tank. Heavy gauge steel tank, interior protective coating, rust proofed and finished painted exterior (standard ASA -61 grey). Tank 1 "NPT fittings are engine supply, engine return, overflow and alternate engine return (not included on tank with basin). Other NPT's include one 2 "NPT (for normal vent), one emergency vent NPT sized as appropriate, and one 3/8 "NPT basin drain (tank drain if no basin) A 4 -1/2" square inspection port is provided with a fuel level gauge and a manual fill cap. NOTE: A tank with special dimensions or any non - standard item will require an approved drawing before order can be released. The tank described above includes the following options: Qy Option Number Description 1 UTRX -50 50 Gallon Tank UL -I42 1 2375 1" NPT for fuel inlet. 1 2350 2" NPT spare for customer use with provided sending unit. 1 2252 2" NPT, Mushroom Style, Screened Atmospheric Vent Cap 1 2262 2" NPT Emergency Pressure Relief Vent Cap 1 VALID Quoted price is valid through May 31, 2011 Customer to advise any additional requirements. Std. 3/8" tank drain located at bottom of tank; overflow fitting back to main tank cannot be bottom mounted. CODE COMPLIANCE APPROVED AUG 1 2 2011 City of Tukwila BUILDING DIVISION TOTAL NET COST FOR THE ABOVE UTRX- 50 rrJISION NO.. $855.00 ALL ORDERS RECEIVED WILL BE ACKNOWLEDGED WITH SCHEDULED SHIP DATE. PLEASE CALL TRAMONT IF YOU DO NOT RECEIVE AN ORDER ACKNOWLEDGEMENT. Terms and conditions: All orders over S100,000 require advance payment of SO% negotiable at time of release. All items FOB Origin, freight not allowed. shipping point Milwaukee, WI, USA. All products net 30 days, subject subject to credit approval. Delivery internval negotiated upon receipt of order with approved drawing. Itesm in quotation subject to buyer's review. Any questions regarding this quote please col Annie at the numbers listed below. TRAMONT CORPORATION 3701 N. HUMBOLDT BOULEVARD MILWAUKEE, WISCONSIN USA 63212 PHONE: 414/808 -3887 FAX: 414!887 -8811 C'TYRS$% E -MAIL: abraundetramont.com JUL 252011 _. PERMIT CENTER GENERAL LEGEND , ///////- NORTH ARROW DETAIL, DRAWING REFERENCE CONSTRUCTION NOTE POINT OF CONNECTION BOLD UNE WEIGHT INDICATES NEW WORK UGHT UNE WEIGHT INDICATES EXISTING WORK SLASHED UNE INDICATES EXISTING WORK TO BE DEMOIJSHED DRAWING INDEX 1.10.01 LEGEND, NOTES. AND DETAILS 1,11.01 FUEL/WASH BUILDING PLAN DOS FROM LEAK DETECTION VALVE. DOR TO PUMP SUCTION, SUPPORT ON WALL S,Ei'APIVIE PERMIT EEQUii ED FOR: ❑ Mechanical [electrical [Numbing leas Piping City of Tukwila :t.ii;_f'I G DIVISION PLUMBING LEGEND No.. Perri* NO., t()b ,� 1 PIPING IDENTIFIER, SEE ABBREVIATIONS 1 XX 0 ELBOW DOWN ELBOW UP TEE TEE ON TEE UP PI-- r v sw approval is subject to ems and omisAns. - 'a! of construction documents does not authE ize t =' Y Olson of any adopted code or ordinance. Rekipt o. ,,:droveciiipid Copy and conditions is acknowle :c1: CA By �dt�E SOLENOID VALVE CHECK VALVE ISOLATION OR SHUT -OFF VALVE REDUCER AS SPECIFIED 9 ( 6 I City Of Tukwila BUILDING DIVISION FVIYr MARK L OCATICN SERVICE PLIIVP FLIaD MICR BASIS CF DESIGN NOTES TYPE SPEED NPM RJOA PPM TarAL I- EAD(FT) FWD [1] MVP (%°ADF) 1-P BP VISSTVVPLL CCRROLM GEAR OCTET 1,140 1 88 CS8 30 113 024 GE ERN391 0112( P-1 SCHEDULE =Ea (, ] PROJDE WET- ITEFLON SEALS (2]PROMDEVVTHTE FCM7rCRWTHN MA4X.A.NCITCNBCD( EXISTING BUILDING OPW PTS -4021 WEATHERPROOF POLYETHYLENE IRANSRION SUMP WTM WEATHERPROOF LOCKABLE COVER PROVIDE VEEDER ROOT COMPATIBLE SUMP SENSOR - ELECTRICAL CONDUIT TO EXISTING LEAK DETECTION PANEL. SEE ELECTRICAL SHEETS PAINT EXTERIOR EXPOSED PIPING c7- BOLLARD EXISTING CURB 3/8' SOLENOID VALVE WITH NEMA 4 ACTUATOR, 120V, AND FM RATING, ASCO SV401A02V9CF7 1' DOS PIPI G FROM BUILDING FUSIBLE LH< SHUT OFF VALVE 1' DOR PIPING TO PUMP OPW FLEXWORKS 1' FLEXIBLE 3' DOS AND DOR PIPING INSIDE 2' -0' MIN SINGLE 4' LINED ACCESS PIPE APT FLEXIBLE BULIOLEAD BOOT FITTING OPW FLEXWORIO SWIVEL FIRINGS UTILITY BOX ACCESS AND UNDERGROUND PIPING DETAIL SCALE: NONE M0.01 MINIMUM 18' BEND RADIUS i EXISTING 3/4' DOS FROM MNN FUEL SYSTEM DAY TANK IN MEZZANINE, FIT WITH HIGH LEVEL FLOAT, SEE SEQUENCE OF OPERATION TERMINATE PIPING 1' ABOVE BOTTOM OF TANK 1' DOS DOR DI OW DOM DOS DOR DR DF ES FC0 FD FOR FOS F0V FPHB 0 GPH HB NW HNC PC 114 JAN PLUMBING ABBREVIATIONS ACID WASTE AIR, COMPRESSED AIR BOTTOM OF PIPE CAST IRON CHEMICAL FEED CIRCULATING CRY WATER; DOMESTIC COLD WATER CLEAN OUT COMPRESSED AIR DEIONIZED WATER DISTILLED WATER DOMESTIC DIESEL Od SUPPLY DIESEL 00_ RETURN DOOR DRAIN DRINKING FOUNTAIN EMERGENCY SHOWER FLOOR CLEAN OUT FLOOR DRAIN FUEL OIL RETURN FUEL OIL SUPPLY FUEL OIL VENT FREEZE PROOF HOSE 8168 GAS GALLONS PER HOUR HOSE BIBB DOMESTIC HOT WATER DOMESTIC HOT WATER CIRCULATING INTERNATIONAL PLUMBING CODE INDIRECT WASTE JANITOR 3' VAPORLESS MANUFACNRING, INC. 99 LD -3000 LINE LEAK DETECTOR. ROUTE DISCHARGE TO DRAN, DRAIN FLOWS TO OIL -WATER SEPARATOR PUMP P -1 MV NPW NO N 0 PC PLBG PNEU PRV RWL RECIRC RD S SS SD UPC V VA VAC V8 VTR W WC WFS ' GENERATOR SUBBASE DAY TANK WITH LOW HIGH AND HIGH -HIGH LEVEL FLOATS LAVATORY MEDICAL VACUUM NON - POTABLE WATER NITROUS OXIDE; NUMBER NITROGEN OXYGEN PUMPED CONDENSATE PLUMBING PNEUMATIC PRESSURE REDUCING VALVE RAIN WATER LEADER RECIRCULATING ROOF DRAIN SOL SANITARY SEWER; SERVICE SINK; STAINLESS STEEL STORM DRAIN UNIFORM PLUMBING CODE VENT VALVE VACUUM VACUUM BREAKER VENT THRU ROOF WASTE; WATER; WIDE(DIM) WATER CLOSET WATER FLOW SWITCH 1N1E REVIEWED FOR CODE COMPLIANCE APPROVED AUG 1 2 City of Tu BUILDING DIVISIO N FUSIBLE U90< SHUT OFF VALVE 1' DOS TRANSTIION SUMP No. REVISION BY APPO DATE REVISIONS No chancres shall be made to the scope of work without prior approval of Tukwila Building Division. will require a new plan subrn teal r :/ :.,�, plan review fcc3. • FSI consulting engineers Seattle, Washington Solutions & Service ¢=ISM mrtl /-1. DOR EXISTING 2 PIPING TO FUEL TANK RETURN PIPING DIAGRAM DETAIL (71\ SCALE: NONE M0.01 cmrRI 2011 n PERMIT CENTER m' REVISION N DESIGNED: BPR PROJECT RANACER: R. MOATTAR SCALE NONE DRAWN: DOO APPROVED: D. CAMPBELL SIZE LOCATION NO: CHECKER MONK Non MUM REINWD10ER 0. CRIPPEN CONIRLCT IO: ONE INCH AT EVIL SIZE IF NOT ONE 1101. SCALE ACCORDINGLY King Department County ot Transportation METRO TRANSIT DIVISION SOUTH BASE FUEL /WASH GENERATOR REPLACEMENT LEGEND, NOTES, AND DETAILS OA1E: 02/23/11 ORASINC NR M0.01 SHEET NR OF 5 OF 14 • ‘ X11 I `J --° UGE UGE 3 \JL UGE UGE 37n 0 0 0 0 0 0 0 0 m (J Ton 3On son " V sm EMERGENCY GENERATOR SUBBASE FUEL DAY TANK. PROVIDE HIGH LEVEL FLOAT, LOW LEVEL FLOAT FOR SOLENOID CONTROLS, ADDRIONAL s;SOLENOID- VALVE - CONTROL.- AND- HICHstDGH- ALARM- FEOATvAEE- ELEGTRIGAL• DRAWINGS. son 3511 rin Son IOn floc r UNDERGROUND DOUBLE WALL FLEXIBLE CONTAINMENT PIPING FOR DOS AND DOR L4 A ..03 4' ACCESS PIPEE'24' MINIMUM COVER t100 nog SAWCUF PAVEMENT. SIDEWALK AND CURB, SEE CML SHEETS I FOR EXACT LOCATION. TRENCH FOR PIPING INSTALLATION. r PATCH PAVEMENT. SEE CML MEETS. 0 rlo 0 NO3 1103 j— j°'.."------- BOUARD, SEE CML SHEETS DISCHARGE FROM LEAK DETECTION VALVE, ROUTE TO DRAIN REMOVE EXISTING SECONDARY CONTAINMENT PIPING, VENT PIPING, AND OTHER DAY TANK PIPING, PATCH HOLES IN WALL REMOVE BUSTING DAY TANK AT MEZZANINE DEWER TO COUNTY SURPLUS SEE 2 /MO FOR SECONDARY CONTAINMENT ACCESS DOR RETURN PUMP P -1, SE 1 /MO FOR VALVING. COORDINATE EXACT LOCATION WITH KING COUNTY PROJECT MANAGER 1' DOS, DOR. ROUTE TIGHT TO ROOF STRUCTURE, USE EXISRNG CONCRETE INSERTS FOR SUPPORT. PROVIDE TRAMONT MODEL TRX -50 SINGLE WALL. DAY TANK WTFH HIGH LEVEL FLOAT. INSTALL FUEL PIPING AS INDICATED ON DETAIL 1, DRAWING M0.01. CONTRACTOR TO CAP AU. UNUSED FUEL FITTINGS. ■Lii 1 -Tsr BOILER ROM 00 0 0 0 0 0 0 0 0 0 n 0 0 0 0 0 I-VENT, EXTEND THROUGH ROOF AND INSTALL VENT CAP 26 INCHES ABOVE ROOF DECK. CONNECT TO EXISTING DOR RETURN PIPING, CONTINUES UNDERGROUND TO FUEL TANK REPLACE EXISTING 3/4' DOS WITH 1' DOS, ROUTE TIGHT TO ROOF STRUCTURE 0 131 ;r • CONNECT TO EXISTING GENERATOR FUEL TRANSFER PIPING IMMEDUQLY AFTER FILTERS. MAINTAIN 7 -0' CLEARANCE BELOW PIPING. REMOVE ABANDONED PIPING. EXISTING FUEL FILTER AND SOLENOID VALVE TO REMAIN. VALVE TO BE USED FOR NEW DAY TANK CONTROLS Mii6t EDM THE GENERATOR SUBBASE DAY TANK IS FED FROM THE SUBMERSIBLE TURBINE PUMPS LOCATED IN THE UNDERGROUND STORAGE TANKS. NOTE THE DOSING FUEL PUMPS HAVE UNE LEAK DETECTORS. THE FUEL WASH BUILDING CONTAINS A SOLENOID VALVE TO ALLOW FIWNG THE GENERATOR SUBBASE DAY TANK. PUMP P -1 SHALL BE CONTROLLED FROM A PROGRAMMABLE 24 HOUR TIMER LNRIALEY SET TO RUN 20 MINUTES OF EVERY 24 HOUR DAY FROM 10 AM TO 10:20 AM. WHEN TIMER ENERGIZES, PUMP SHALL ENERGIZE AND PUMP FUEL WHEN TIMER DE- ENERGIZES, PUMP SHALL OE- ENERGIZE. IF A HIGH LEVEL 15 SENSED IN THE DAY TANK IN THE MEZZANINE, PUMP SHALL IMMEDIATELY DE- ENERGZE AND AN AUDIBLE AND VISUAL ALARM SHAU. BE SET. ALARM SHALL REQUIRE MANUAL RESET BEFORE POWER CAN BE RETURNED TO PUMP. FUEL /WASH BUILDING PLAN SCALE: 1/8' a 1' -0° REVISOR BY APP.() DATE • 1111 FSI Seattle, Washington engineers SeDHIe, Washington Solutions & Service DMTM1r ra ra Ta m leolli x gE atilt 10N: WHEN LOW LEVEL FLOAT IN THE GENERATOR SUBBASE DAY TANK INDICATES THE NEED FOR FUEL, EXISTING FUEL PUMPS SHALL ENERGIZE AND THE EXISTING SOLENOID VALVE SHALL OPEN AFTER FIVE SECONDS. AFTER AN ADORONAL FNE SECONDS. SOLENOID VALVE AT GENERATOR SHALT. OPEN. WHEN HIGH LEVEL FLOAT IN THE GENERATOR SUBBASE FUEL TANK INDICATES A FULL TANK. FUEL TRANSFER SOLENOID V VES SHALL DE- ENERGIZE. VALVES SHALL CLOSE. AND PUMPS SHALL TURN OFF. HIGH -HIGH LEVEL FLOAT IN THE GENERATOR SUBBASE FUEL TANK SHALL TRIGGER AN AUDIBLE AND VISUAL ALARM AND TRIGGER THE EMERGENCY FUELS Tr ' •Y REMOVING POWER TO THE PUMPS. ALARM SHALL ALSO DE- ENERGIZE FUEL TRANSFER SOIENOID4= ALARM SHALL REQUIRE MANUAL RESET. AN EMERGENCY FUEL SHUTDOWN BUTTON SHAU. BE MOUNTED NEAR THE GENERATOR WHEN BUTTON IS PUSHED, NE EMERGENCY FUEL SHUTDOWN RELAY CONTROWNG THE FUEL TRANSFER PUMPS SHALL BE TRIGGERED • G POWER TO THE PUMPS. ADDRIONAU.Y, ALARM SHALL DE- ENERGIZE FUEL TRANSFER SOLENOD vo A LEAK Ohitt.11ON SENSOR WILL BE INSTALLED IN THE WEATHERPROOF TRANSRION SUMP. IF A LEAK 6 DETECTED, THE EMERGENCY FUEL SHUTDOWN RELAY CONTROWNG THE FUEL TRANSFER PUMPS SHALL BE TRIGGERED, REMOVING POWER TO THE PUMPS% AN AUDIBLE AND VISU . M SHALL SOUND. ADDIRONALLY, ALARM SHALL OE- ENERGZE FUEL TRANSFER SOLENOID ALARM SHALL REQUIRE MANUAL RESET. DESIGNED; PROJECT WNICEJt BPR R. MOATTAR Tuuart AinnRO DGD D. CAMPBELL CHECNEO Les NO REG NM N++ — RECODUENOED: CONnt4Cr Na D. CRIPPEN — SUlE 1/8" 1. -0' SITE TAr.AnoN No: ONE INCH AT FULL SRI F NOT ONE I1SH. SCALE ACCOREAND.7 King County of Transportation REVIEWED FOR E COMPLIANCE APPROVED AUG 1 2 2011 City of Tukwila BUILDING DIVISION CITY FAUKPALA JUL 2 5 2011 PERMIT CENTER METRO TRANSIT DIVISION SOUTH BASE FUEL/WASH GENERATOR REPLACEMENT FUEL /WASH BUILDING PLAN DOTE: 03/01/11 CittnntO M1.01 SHEET Age Or 6 OF 14 , 11,5. SCM. 40 sreet. 2000 SOCKET wet(' P.7-7-/NGS 60.40wriaou AN err e•ie .4F • r 0 0 6 0 LM.EZ • !•4- Z.:7•17--0 .-e-.. !, t_ 00 gacs c'3 ..... - 3 ,: sir i . . .l.. . 0 NEM " • • ( awn" "auaseser G.0 . 0 4"GN • rar..ir "TO 51k f' v 4- 4-94.-oBV2- . 4'74 ▪ at _T.. P1E:SS • 52..• LIP 2'W SIP• SS 4.1 • 750 6A6120/5 ...7.7;1111 • t. 41 -•*" k A4L4147: WEI • • -117,522 ' FLIVO PLAN tela'v to. .44 UP 4 111 , n1 • gi • 1-tor•G cpr- move' c ArveliArt WO/L_..e75.to j4704- .td - - • 4. 11121 317K 15-.474WACTOLIALV-€3. •FrocOl• os-r.acr73.454e. •--7-7Awr. BLDly.7-7ABS- ..2.5375WALV TAWS APVTAA272rAM.Yee" ..SeN60044";'.5•VEET 4' 110. IMIR•11101011 USE' 447-FILEEZ2 TANK 4000 GALLONS . NA7- PREZIO cD44-5.17,7Are rANN. 6000 GALLONS • • • • • • . . ASTE OIL TARA . 1:474-141.45415 •e.ASAPLAVg MAW. ..7.24.22716,4ALONS I ' 149:CCE. ..0-17F321412.-P1P/AIBTfilL.10W11 2321122W :COZAD& _SMALL 13B MBOO IZEINIF0,24Et7 PLASM 5b5":BA.B4tP7151:5 exezPr •46.5.wanewr, P.O.SEL NIEL. TANKS' 4205570 441LA0.44 (.7 7-VPIZAL) Nora: See ..relleBus.Or. swEer M-5$ • T0er.uLs, .s.vrersAt-St FOR ANK P77T/AIGS. ere. • . • . • • rANA NOLe 00AVN.SLAB - See .57-Rue7 04W65. set-pion, /7N • zrecoiv icr•o• (rw4) A4w. 2.0/A. TANKS 5S00/#4 (41.1.) -5EcT I 0.l./ •.44Le: 1.10TE8: A sucKrat .24/ALL BO AS SPEC/FIOD 2. FOR 77ODOIYA/ OOKAIL, SOB SpRUcrt/RAC ORAMONGS T$2.00WW3- .00.2 41072 e 6.0iA TANKS • r* ; • F 0 U A/ 0 AT / 0 /V .01=Z. AA/ f/e• /to. srvsV Nara: 4A2 Pas4/4 pima-Aar 6641 sato./ A4.044 31.4. AUSe Aaava 44A06 our50e asesa. RAIATalt. ARCA. PaPONONT 4.5 GAS. • .SE.RV/CE. EIA/TRA AKE. DETA/1_ WATAIVOIL AS PIPCSSWZA- Reacepal lastmer.- - • I.41 P.a.f%74r ..""IfeeSS•70 fArROCWLATiatKaL70a &pal= 'LOW P.OTARADT TO 222.d1. APWIROVCO 4AJ APAR 'SeALs REVIEWED FOR CODE COMPLIANCE AO)PROVgiD AUG-I 2 2011 City of Tukwila ' BUILDING DIVISION 4/01.1-12EVIS-A140 0015.01414 7Ar.Sa ovoa....r • . . r • A : criAnau1/4 JUL 2 5 Z011 iERMIT CENTER MON- 6'El/4-NUE I3L,D4 -PAP?: .1116;17 • . • . AS CONSIBUOXED".. 'DA1020_11K.C.4 REFERENCE DRAWINGS REVISIONS 4'.". •1111141.1 110•1 SCALE ammo amaze Yaw". MUNICIPALITY OF ASNMOIrt TROPOUT MUNICIPAUTY OF METROPOLITAN SEATTLE • 1 DE LEUW, CATFIER & COMPANY 11VMOVe• SOUTH OPERATING BASE FUEL. & WASH.SUILDING NON-REVENUE VEHICLE STORAGE- Ries FOUNDATION 8 UNDERGROUND TANK PLAN • • • Ta.B.7ig m5.0 • s• . s• • .5roaKt157fQ.'.. :.ccrtn.R•v. ►P/"o,�l`Z'•.1io_o� e= ser�`� ' REVIEWED FOR CODE COMPLIANCE APPROVED AUG 1 2 2011 City of Tukwila BUILDING DIVISION c�,Q.c1 • • (/° •• •• .. .1 rip 1 .low- TT.o✓.iA.6 , I • 'Ili` -4-* 71,O Ll� .s3'.V ?'•.rpi 0 -0 C : g•° 2.0 . •' l° Secrio.a •P� ' IY£• r.. • Ito. : • ht0 t /} o ..YO.O ' • ;;� b" (.2+}l __: • :::.',..:,.. •� ..:: 1 � J I_OC' . YI ,_ t�'1- -, 7 /� � ♦i is i o- H-•� ,,,n . i t "—V- .}0 1 8 0 • B Ig:o ': 8 -0 ' •c 8 -o 0.o ' B o.. / i) 14 0 •. • (4-) . . L . 4 c�T,.. �.. j y . ! it s . •' ., .�-® .ro- i •4}� _�_ •--..�� _ `Y 4 *:Ir c {4.) • ....__..._._ r.. • 3 •,;',\,‘ ' • . '-46 R ' .r f• 'ft 0 -. 40 • : aY •- Ei f 'r° 0 •dl- • n C •. •r' 1 - 't?� I ?It .14 sL`!lii�� 4t•1t ?_RI 1:1 t'' ; '' .: •j� T•4 g.o. 0_P : 7.4 • . +r- .I w w • w is :E�. 1 1 6-0 , i4 . 4 11 - z04.• PeNDe-rr .S - 'f G5• SID£WALt. 3 • I.5• vrRIGHT I9'- x44' PE1;DAlr 24.. .16S. :Roomer 4- US +5. 51DEs ou. DRY '• .0.310.4,4;1 0 • I C3-4) fr cu., ;; a • T 4 0. • • Bo, B-o: .g-0 . - ,• N (1 O i. t: �� r f 1 4 ie : 74a: 'g -o+ • 4...._1_ _;..... •-- •:._`.. ....� 1' 4..• o! Iv' i• E to t1► ' Pi• F i 0 'i o,; 1 . ;0'Y',10 k t D / i u i • 1' ! • 1 • -,4sp • •yfE Tnul Nn to .Pl %G•R )w,20tD •+rt"& toy• oNN ' o ° ?i. aft ,. • 73• = •12.346 li! '.1 • u..' ".%•;.j...- . ,D.PAL IC�jCoe ,e4c4 'p- / rftRV • G - SAM TYPO Aa • - Gar.! 4. T•1 *? y/, • • LEAN Pas•. BCrwecn 'COS.. ✓ . • • ? • Age .i I N4�5•4S S t ')p4 AT 44/4 MT. =� PIPE ECR[DULE L /4E C '� • T 4H1 E t/ RE Tnau t17 E - • �E =I�I . - --- ® 4••■ • c 1'uCL i9.�oy.' .I I waSN elo��• Y . • 412• .TfO EE 4 ti� .. f • p +(2 1 ., • • rb• ^'�•- S22ae4,e42r4. T • i-o ci Reb 1Riuy O044.AeDS /Ll • 1 • o t' (too , Ohl . • -r4- f.7o!pr •r•n 441,T •r3.AGK P■P£• .4 Fm s u(g S •tvoicaL F67_ libES '• COC_o II 6 Tr2R2), 11 vco It LO • • 99 c.nt Ve>. /0. ..-107:1 -107 IA ■' • ` r j I £,CITY .8 JUL 2 5 2011 1 PERMIT CE r4 CA 4'4 4 f4.1 ce • -11-;.1% Co' 44241244 VA a. VC ! Rcrn°0 IeL L -1 1.4A4.4. P. /. ✓ALVG 1 $K . 4-20+144.• RLDV LCR 1 -D t.[..4. Pte 0 0 Scx ScCe•f e E SEFr 1eU APPROVED' mriraiMitalt my • NOV 2Ion wr /ro t � 212/ .0 RAN b WrlIDIVn ri ') but b ma..t N4+nt �p•b L pbm n abused d Er omits. ml ten<1.7 On Prat PCa *Mg*. tlitlb boadel bQrlsghbt Ymo wbOpy. bbsi }?:>. r: • (I fuEL . Y✓ASIj BA/1LID•1 N - z a� vn .'+� r...._ :lufomaf'c °t iprfnhler C'OE ■0EAT1011 01 AYEIICA . •RI. 44111 •.••L /•% APPROVED OY •/ /' //. . -liui SURVEYED pY rw/ d thr T11� , • ry 164 / %. Hu•1Y/c�IPAL.sir i £• TR. O/ oc / ryN lc" [G GMK[O DY S / :J _§___•- K•.gn7.•v_t/• — /•% A75 eAT[LY WA ovRCE ,50.47704 1.i11� A••4rs I. • . . .. / / 0C I.t: • /8 ": • / • smwr 110 s- • Or • -- - . - •- •. / / 33' 74o CGR1[4CT 110.. 6a" :redso 5 4 3 • • Y REFER TO DETAIL A /M402 FOR ENLARGED PLAN FOR THIS AREA 3' DOS TO FOUR DIESEL OIL DISPENSERS IN FUEL/WASH BUILDING, SEE OW 94403 AND DETAIL U /M404 FOR CONTINUATION • 2 Plotted 02/02/95 0 14:00 • 2" L VENTS (TUyPp Ov S •• TO TERMINATE W/ VENT CAPS. ATTACH TO WALL USING UNISTRUT P1000 CHANNEL D PIPE CLAMPS NEW DIESEL OIL FILTER ASSEMBLY 1" DOS. SEE DET. H/1403 NEW FLR & SOLENOID VALVE. MOUNT 0 5' -0 AFF NEW OUTSIDE DIESEL OIL DISPENSER CONNECT NEW 3/4" CA 0 EXIST. 1" CA SUPPLY TO HOSE REEL 0 15' -10" AFF 1" PVC CONDUIT NOTE 6 CONNECT TWO NEW 3/4" DOS LINES TO EXIST. FUEL 1.114E5 FROM STANDBY BOILER AND EMERGENCY GENERATOR DIESEL OIL CIRCULATION PUMP AND CONNECT NEW 3/4" DOR LINE TO 1 EXIST. 3/4" DIESEL OIL RETURN UNE. MOUNT SOLENOID VALVES AND FUEL METERING ABOVE WALL LOUVER, (SEE DET. H/1403) EXIST. OVERHEAD 3/4" DOS NEW OUTSIDE GASOLINE DISPENSER u EXIST. BOILER DOS VALVE AND FUEL METER MOUNTING LOCATION BOILER RM. '® 000 SD L J ELEC. VAULT 28' -6" REFER TO ELECT. DRAWINGS FOR LEAK DETECTION AND POWER CONNECTIONS TO COMMON WELLS (TYP AU. TANKS) 2' -6" 4, —O" I 1,.." tor 14e1 Iwo: too 13 11 VALVE SEE^ Itur LOP 11241 1104 b. 1130 OIL/WATER SEPARATOR AND INDUSTRIAL WASTE SYSTEM SEE DEL A & BB /C 403 pa »: 74P 112.1 6' -4" C.O. 2-0CD 2 "OCD 3'O'D 17.•33K WM 32 6.000 GAL ENGIHE••QIL 6.000 GAL ANTI- FREEZE TANK 140. SBFW -IA •' •.. TANK N0. SBFW -2A SEE OET. B/M501 '..sq OET. E/M501 00V AV ADD5ONAL TANK BALLAST AS REO'D. (FIELD VERIFY) 9' -8" 'r 0 021 ,,w,,/ ) /‘—'1 r� / .1 �/ J o p.. 7a. I.mi 11,... for t.i91 IWrc KM 11..'57 1 IWa KM 13 3•11 12,000 CAL. DIESEL 12b00 GAL DIESEL 12.000 GAL DIESEL ` SEE DET. -SB 0/, 501 - 'TANK EE DET. D/M5011 SEE DET. D/M5011 T4� 1 o'-o" 4.{s 10' -0° 4199 KIR 13 12,000 GAL GASOUNE TANK"NO: "SBFW 4R SEE DET. B/M501 23' -8" ce- 8' -6" 22' -1 1 " AS -BUILT JPB 12/94 RELOCATE O/W SEPARATOR & UST'S/PIPING SOUTH OF GRID 3 JPB 12/9: CHEM SOLUTION CONDUIT ADORION REVISION JPB 6/93, BY DATE ELEC. VAULT 0 0 io 00 z Z REVIEWED FOR CODE COMPLIANCE APPROVED AUG 12 2011 City of Tukwila BUILDING DIVISION EXISTING HOLD -DOWN SLAB SHOWN FOR REFERENCE ONLY DEWATERING WELL (TYP. 3 PLACES), SEE DET. 6/M505 UG TANKS AND PIPING PLAN it DETAIL SCALE: 3/16' =1' -0" As `Bui t Drawing See original file copies for submittol and opprovol signotures, and for engineer's professional seal DEC 94 • • v • NOTES: EXIST. EMERGENCY GENERATOR LAN. R DIE LVEL), (CENTER E ND FOR N ME MANIFOLD CONNECT EXIST. 2 DOR TO NEW 1'0 ABOVE SIDEWALK, SEE 1 "4 HYDRAULIC HOSE CARRIER PIPE INSERTED IN EXIST. SCH 40 STEEL 2" DOR FROM EMERGENCY GENERATOR CONNECT NEW 1" DOR HOSE TO NEW 2" DOR PIPE INSIDE FRP INSPECTION/ CONTAINMENT SUMP. FRP SUMP W/ UD ACCESSIBLE IN PLANTER STRIP OUTSIDE BUILDING 1. REFER TO DEMOLITION DRAWING FOR EXISTING PIPING ANAND /ORREROUTEED IF DISTURBEED SHALL REPLACED BY NEW CONSTRUCTION. (LOCATIONS ARE APPROX.) 2. ALL SECONDARY CONTAINMENT PIPING TO SLOPE TOWARD POINT OF MONITORING. EXCEPT AS NOTED. 3. REF &TO SYSTEM AND DIAGRAMS A, FOR & D/1401, PIPING SCHEMATICS. 4. SEE DWG. M101 FOR MECHANICAL SYMBOLS. 5. SUBMERSIBLE DIESEL FUEL PUMPS FP -1 & FP -2 ARE SALVAGED FROM ORIGINAL INSTALLATION. PUMP FP -4 IS CONTRACTOR FURNISHED. 6. STUB 1'9 PVC CONDUIT UP AT OUTSIDE WALL 1' -0" AFF. TERMINATE W/ THREADED CAP. 7. TOP OF CMP SHALL TERMINATE 1' -0 BELOW FINISHED GRADE, BOTTOM SHALL TERMINATE ON TOP OF EXISTING BENCH AT WEST SIDE OF TANK HOLE. r a KEY PLAN AREA 4 0E96NED: AM/ JPB CRAVD! I CHECKED: APB I AM RECOIWENDED: AM a: Ffl E T R O Municipality of Metropolitan Seattle APPROVED: MSK COHWACT NO: T/M 11 -93 SOUTH BASE / UNIT REPAIR UNDERGROUND H 4 REPLACEMENT AREA TANK PLAN • 129888 D ATE: MARCH 1993 nix N0: X14 D RAWING No- M401 SKEET N 41 OF 63 R: \4859- 004.11\Owga \300_01 5 -25 -10 02:39pm mar9eu FUEL /WASH BUILDING TYPICAL SECTION AND DE REOMOM =f — REFERENCING SYS (1) THE SECTION IS CUT ON DRAWING A101: SECTION LE TER ELEVATION LETTER ▪ 0▪ 1 DRAWING 0 WHICH SECTION /EIS O . (2) ON DRAWING M05 THIS SECTION IS IDENTIFIED: IV• A3.0 ITVL ®E CO A DISCIPLINE • ASB ASBUILT G GENERAL C CIVIL L LANDSCAPE A ARCHITECTURE S STRUCTURAL .• M MECHANICAL FP FIRE PROTECTION E ELECTRICAL VIStf;hi TR °" C TRAFFIC CONTROL TS TRAFFIC SIGNAL U URBAN DESIGN NG NUMBERING SYSTEM KEY: VICINITY MAP NOT TO SCALE GENERAL NOTES 1. CONSTRUCTION SHALL BE ' IN ACCORDANCE WITH THE INTERNATIONAL BUILDING CODE AND THE LATEST EDITION OF THE BUILDING CODE. A COPY OF THE APPROVED PLAN, MUST BE ON SITE WHENEVER CONSTRUCTION IS IN PROGRESS. 2. IT IS THE SOLE RESPONSIBILITY OF THE CONTRACTOR TO INDEPENDENTLY VERIFY THE ACCURACY OF ALL BUILDING UTILITY LOCATIONS SHOWN AND TO FURTHER DISCOVER AND AVOID HARM TO ANY OTHER BUILDING UTILITIES NOT SHOWN HEREON WHICH MAY BE AFFECTED BY THE IMPLEMENTATION OF THIS PLAN. 3. THE CONTRACTOR SHALL TAKE APPROPRIATE STEPS REQUIRED TO PROTECT EXISTING BUILDING UTILITIES. EQUIPMENT OR BUILT —IN FURNISHINGS REMAINING IN THE WORK AREA DURING CONSTRUCTION. 4. THE CONTRACTOR SHALL FIELD VERIFY ALL DIMENSIONS AND LOCATIONS PRIOR TO START OF WORK. 5. ALL DEMOLITION DEBRIS MUST BE DISPOSED OF LEGALLY, OFF SITE SHEET 1 2 3 4 5 6 7 8 9 • LOCATION MAP NOT TO SCALE SHEET INDEX DRAWING NUMBER G0.01 C1.01 C5.01 51.01 M0.01 M1.01 E0.01 DE1.02 DE6.01 10 E1.01 11 12 13 14 E1.02 E6.01 E6.02 E6.03 DESCRFP110N VICINITY MAP & INDEX TO DRAWINGS PAVING & RESTORATION PLAN & SECTION DETAILS & NOTES ' GENERATOR 'PAD PLAN & SECTION LEGEND, NOTES AND DETAILS FUEL/WASH BUILDING PLAN ELECTRICAL SYMBOLS AND ABBREVIATIONS FUEL WASH BUILDING DEMOLITION PLAN DEMOL MON ONE —LINE DIAGRAM FUEL WASH BUILDING CONSTRUCTION PLAN SITE FUEL WASH BUILDING CONSTRUCTION PLAN CONSTRUCTION ONE —LINE DIAGRAM PANEL SCHEDULES PANEL SCHEDULES REVISIONS No comes shall be made to the scope of work without prior approval of Tukwila Building Division. NOTE Revisions will require a new plan submittal and may include addfional plan review fees. REVISION BY APP'D DATE ::SECTION SECTION LETTER RAINING ON WHICH SECTION WAS TAKEN. SCALE: 1' =1' --0- A1.0 OCT 1 6 2010 (3) DETAILS ARE CROSS— REFERENCED IN A SIMILAR MANNER, EXCEPT THAT DETAILS ARE IDENTIFIED BY NUMBERS RATHER THAN BY LETTERS. ABBREVIATIONS: SEE DWG E0.01 SEPARATE PERMIT REQUIRED FOR �Mechanics! Electrical Plumbing Gas Piping City of Tukwila BUILDING DIVISION SOUTH BASE FUEL /WASH BUILDING GENERATOR REPLACEMENT KING COUNTY NS 0 9 2010 DESIGNATED CATEGORY O GENERAL 1 PLANS 2 ELEVATIONS 3 SECTIONS - 4 ENLARGED PLANS 5 DETAILS 6 SCHEDULES & DIAGRAMS 7 USER DEFINED e USER DEFINED 9 3D VIEWS AREA LOCATION (FOR PROJECTS WITH �2 �/ O MULTIPLE LOCATIONS) DISC1PUNE DESIGNATOR / SEPARATOR SEQUENTIAL DRAWING NUMBER WITHIN DISCIPLINE AND DESIGNATED CATEGORY FILE COPY Permit Mo., M\\, Plan WSW approval is subject to ens and omissions. Approval of constructim doh does not authorize the violator) of any act code or ordnance. Receipt of approved G nd s.;l.,:jl:,, ; is ackn ged or Date: /© O City Of Tukwila BUILDING DIVISION M I 0 t PERMIT CFA ELCON ASSOCIATES, INC ENGINEERS - CONSULTANTS 16300 CHRISTENSEN ROAD, SUITE 330 SEATTLE, WASHINGTON 98188 TEL (208) 243-5022 FAX (206) 2435205 DmCNET% D. SIATERLIS DRANK M. KLIM.EK GREcKat S. BARTKOSKE PROJECT MWACEIC R. MOATTAR APPROVED,. D. CAMPBELL AS SHOWN snE LDCADON I : IRS IA, . Ram =MID RECwummm D. CRIPPEN CONTRACT NO: ONE INCH AT FULL SIZE IF NOT ONE INCH, SCALE ACCORDINGLY King County Department of Transportation METRO TRANSIT DIVISION SOUTH BASE FUEL /WASH GENERATOR REPLACEMENT VICINITY MAP & INDEX TO DRAWINGS 5 /25 /ID DRAWING NOT G0.01 SHEET NNL OF 1 14. • K \110000- 110250 \110106 (KC 58 Cenerator ) \CADD \Deelgn\KCSD— C101 —SP 5 -25-10 10:15am matte • T EAST MARGINAL WAY \LC PROPERTY UNE CONC WALK , '\" REMOVE EX. TREE SEE STRUCTURAL PLANS FOR ./ WALKWAY, LAYOUT OF GENERATOR PAD, WALKWAY, AND WALL r- b z _.6' CHAIN LANK FENCE a= • on ROCKERY WALL z U n _( D 5' BEYOND -n Z7Z CONC. wk.14.94 '.) a C> rA PROTECT EX. CONDUITS. LOCATION. EX. CHAIN UNK FENCE TO REMAIN •\ GE�JERATOR, SEE ELEC. s PLANS 1 8 "CONCRETc .Q EX. ` - • ►.. r d E Sit!{. „.. , s G • s .I TREE TO REMAIN -FENS- SEE- OE�4NIx 4/65:&} r • • TT - -_ — t . INSTALL 2' THICK WI ETA Fri 41 j �-. J MULCH TO ALL DISTIJ1 CO ��7 v "0 > �`. AREAS. ). .c-4 v N Y a ti� MATCH RADE. ( -- 8 "CONCI ?ETE : 6' CHAIN L.INKx FENCE w 0_ 10� xi ° CENTER OF' UD ELEV= 21.69 s s �' O � \ \ \ \ \ \ \ \ \\ \v1 � q' EX. JOINT, CO r- vI (TYP.) MATCH EX. 6” CURB & GUTTER \ \ \ \ \ \ \ \ \ \\ \\\\\\\\\\\\\\.\\\\\\\\\\\\\\-\\-\\\VN:\ PROTECT EX. WATER UNE. FIELD VERIFY LOCATION. \\\' MATCH EX. 12" -WIDE CURB AT EX. CONTROL JOINT , PORTLAND CEMENT CONCRETE PANEL REPLACEMENT. SEE DETAIL 1/C5.01 EX. FUEL / WASH BUILDING PROTECT EX. 12" CONCRETE STORM SEWER UNE. FIELD VERIFY LOCATION, EX. COMMUNICATIONS UNE TO REMAIN. FIELD VERIFY LOCATION. EX. SEWER LINE TO REMAIN. FIELD VERIFY LOCATION. MATCH EX. 12"-WIDE CURB AT EX. CONTROL JOINT \\\\\\\\1\\\\\\\\\\\\(\ \\ \\'‘ \\\ \\\ \ \ \ \ \ \ \ \ \ \ \ \L\\1' EX1RUDEO, CURB- J61 < HET? o�o; o 00 CIA 119 111.61NESs` OATS BEM YOU CC I 'elf - 424-5555 , Co oc) T 0 MP PPROVE O OCT 15 2010 n 1. O O}. 0 City of Tukwila BUILDING Dfinqinni TO 0 10 20 30 • FEET (1" = 10) ABBREVIATIONS: EX. EXISTING ELEC. ELECTRICAL CONC. CONCRETE PCCP PORTLAND CEMENT CONCRETE PANEL MAX. MAXIMUM MIN. MINIMUM TIP. TYPICAL• GENERAL NOTES 1, CONTRACTOR TO FIELD VERIFY DEPTH AND LOCATIONS OF ALL UTIUTIES. • LEGEND 0 0 o CEDAR FENCE WOOD MULCH CEMENT CONCRETE ROCKERY -- — APPROX. UMR OF DISTURBANCE CONCRETE MIX REQUIREMENTS 1. MINIMUM FLEXURAL STRENGTH: 500 PSI AT THE END OF 3 DAYS; 600 PSI AT THE END OF 7 DAYS. 2. MINIMUM COMPRESSIVE STRENGTH: 3,100 PSI AT THE END OF 3 DAYS; 4.500 PSI AT THE END OF 7 DAYS 3. CEMENT: PORTLAND CEMENT SHALL CONFORM TO THE WSDOT REQUIREMENTS FOR TYPE III. SLAG CEMENT WSDOT REQUIREMENTS ' 4. MINIMUM CEMENT CONTENT: AS REQUIRED TO PRODUCE THE SPECIFIED STRENGTH AND OTHER CHARACTERISTICS BUT NO LESS THAN 655 LBS. /CU.YD. OF CONCRETE. 5. SLUMP: 2' +/- 1'. CONCRETE WITH SLUMP EXCEEDING 3' WILL BE REJECTED. 6. AIR ENTRAINMENT: 4.0 PERCENT MINIMUM TO 6.0 PERCENT MAXIMUM 7. FINE AGGREGATE: CONFORMING TO WSDOT REQUIREMENTS FOR CLASS 1. LCOARSE AGGREGATE CONFORMING TO WSDOT REQUIREMENTS FOR ASSHTO GRADING NO. 467, 1 -1/2' MAXIMUM SIZE. • 9. BASIS FOR MIX ACCEPTANCE SPECIFIED FLEXURAL AND COMPRESSIVE STRENGTHS AND SLUMP. GENERATOR ENCLOSURE, SEE ELEC. PLANS GENERATOR PAD. SEE STRUCTURAL PLANS FOR GENERATOR PAD, WALKWAYS, AND RETAINING WALL RETAINING 1 CEDAR FENCE, SEE ELEVATION 4/C5.01 BEYOND WALL l I r B - RECEIVED OW OF TUKWILA � SECTION n ®. ®9 2010 SCALE 1' =2' -O' • C1.01 REVISION APP'D DATE. Consulthg Engineers 1601 Frfth Avenue Suito 1600 Seattle, Washington 98101 -3665 (206) 622 -5822 Fax (206) 622 -8130 OESGNEM LL EMMETT Melt K PECK CNECKEO: D. SCHWARTZ RECO,ammER D. CRIPPEN PROJECT uMUGEFC R. MOATTAR APPROVER D. CAMPBELL IaS NO W"40 Mt= - CONRNCT NO: AS NOTED SITE LOCawN Ji0f ONE INCH AT FULL ALE I....1 IF NOT ONE INCH. SCALE ACCORDINGLY King County Department of Transportation PERMIT METRO TRANSIT DIVISION w asp /25/10 SOUTH EASE FUEL/WASH GENERATOR REPLACEMENT PAVING & RESTORATION PLAN & SECTION DRAMMO NO:. C1.01 MEET NO: Cr 2 14 E E "CIS 0 1 N• TS A Fi A °s A W /2+H/3 (MIN 3.0'). W /2 +H /3 (MIN 3.0') 6.0' MIN (SEE CONSTRUCTION NOTE 1) +nw' +moo' +'A o'+�aO111 o' +moo'+• WARNING TAPE. (TYP). ELECT. CONDUITS. SEE ELEC. PLANS 1 /4 "± 1 /18" GRAVEL BACKFILL FOR PIPE ZONE BEDDING PER WSDOT STANDARD SPECIFICATION 9 -03.12 (3). FUEL UNE. SEE MECH. PLANS PCCP REPAIR OVER TRENCH DETAIL SCALE NONE POURED JOINT SEALER PER 2010 WSDOT STANDARD SPECIFICATION SECTION 9 -04 PCCP (TYP) BACKING ROD 0 = 1.25W LOCATION H . • W 38" MIN LONGRUDINAL 1/3 0 5%8' MAX TRANSEiSE 1/4 D 5�8. id MIN till TN RISES HAYS la let YOU DIG �I-BOO -424- 5555 CONTROL JOINT SEAL DETAIL SCALE: NONE • 1 0 8D' i 6.0' (8.0' MAX) 2x4 CEDAR u 1- 1/2" MAX SPACING 4 1 / / POST CAP ROUND, EPDXY — COATED, 'GRADE 60 SMOOTH STEEL DOWEL BAR, 0=1/80 x 18" LONG 0 12" O.C. (SEE NOTES 1 & 2) END CAP (SEE NOTE 3) NEW PCCP • SEE DETAIL 3/C5.01. GROUT RETENTION DISK (SEE NOTE 3) DRILL EXISTING PCCP TO EPDXY •SET DOWELS (SEE NOTE 3) EXISTING PCCP . 0/2 CONSTRUCTION JOINT TYPE 3 LONGITUDINAL OR TRANSVERSE DETAIL SCALE: NONE 4x4 PRESSURE TREATED POST 1x4 CEDAR TOP RAIL 1x4 CEDAR ON EDGE 1x6 CEDAR BOARDS 1x6 CEDAR BOARDS —1x4 EDGE CEDAR (OUTSIDE) 2x4 CEDAR (INSIDE) 1 CEDAR FENCE • ELEVATION SCALE: NONE CONCRETE FOOTING (18" DIA.) CONCRETE DOME TOP NOTES: 1. SET BARS AT 90' FROM AU_ POINTS OF THE FACE OF THE PCCP PANELS. 2. GREASE THE HALF OF ALL DOWELS TO GO IN NEW PCCP. 3. SET DOWEL BARS FOR JOINTS BETWEEN NEW AND EXISTING PCCP FOLLOWING THE SUBSEQUENT PROCEDURES: A. DRILL HOLES ON EXISTING PCCP PANELS THAT ARE 1 /16" LARGER IN DIAMETER THAN THE DOWEL BARS AND AT 90' FROM ALL POINTS OF THE FACE OF THE PANELS. REMOVE DEBRIS FROM HOLES BY BLOWING THEM WITH COMPRESSED AIR. ENSURE THAT THE HOLES ARE DRY. B. AFTER THE PROJECT REPRESENTATIVE HAS VERIFIED COMPLIANCE WITH "A" ABOVE, PLACE SUFFICIENT EPDXY GROUT .(PER 2010 WSDOT STANDARD SPECIFICATIONS SECTION 9 -26) IN THE BACK OF THE HOLES TO COMPLETELY FILL THE GAP BETWEEN THE DOWELS AND THE WALL OF THE HOLES. USE FLEXIBLE TUBES OR CARTRIDGES WTTH LONG NOZZLES TO OISURE THAT THE GROUT IS PLACED AT THE BACK OF THE HOLES. C. AFTER PLACING THE GROUT AS DESCRIBED IN 'B" ABOVE, PLACE A THIN, PLASTIC GROUT RETENTION DISK OVER THE DOWELS SO THEY WILL REST AGAINST THE FACE OF THE EXISTING PCCP PANELS AND PREVENT THE GROUT MATERIAL FROM FLOWING OUT OF THE HOLES. WITH THE RETENTION DISKS IN PLACE, INSERT THE DOWELS INTO THE HOLES WITH A TWISTING MOTION SO THAT THE MATERIAL IN THE BACK OF THE HOLES IS FORCED OUT AND AROUND THE DOWELS. USE CHAIRS, OR OTHER PRODUCT OF NON — CORRODING MATERIAL, TO MAINTAIN THE DOWELS AT THE CENTER OF THE HOLES, AND AT 90' FROM THE FACE OF' THE PANEL D. SUGHTLY GREASE THE PROTRUDING END OF THE DOWELS AND PLACE EXPANSION END CAPS. E. OBTAIN APPROVAL OF THE DOWEL INSTALLATION FROM THE PROJECT REPRESENTATIVE PRIOR TO PROCEEDING WITH PLACEMENT OF NEW PCCP. E IEWED FOR COMPLIANCE APPROVED OCT 15 2010 City of Tukwila BUILDING DIVISION 6' DIA. SCHEDULE 40 PIPE FILLED W1114 CONCRETE GRADE LENGTH PAINTED YELLOW 18' BOLLARD DETAIL SCALE: NONE CONSTRUCTION NOTES 1. REMOVE AND REPLACE PCCP PANEL SECTIONS OF 6.0' MINIMUM WIDTH EXCEPT WHEN THE REMAINING PANEL SECTION WOULD BE LESS THAN 6.0' WIDE. IN WHICH CASE THE ENTIRE PANEL SHALL BE REMOVED AND REPLACED. 2. REMOVE PANEL SECTIONS AT EXISTING JOINTS OR SAWCUF PCCP TO STRAJCHT LINES. CONSTRUCTION SEQUENCZ 1. REMOVE EXISTING PCCP TO THE WIDTH REQUIRED TO MEET THE PROPORTIONS SHOWN BUT NO LESS THAN 6.0'. (SEE CONSTRUCTION NOTES 1 & 2). 2. EXCAVATE TRENCH TO THE MINIMUM WIDTH REQUIRED TO INSTALL UTILTIY.. 3. AFTER COMPLETING U11LIW INSTALLATION, BACKFILL TRENCH TO 0.5' BELOW SUBGRADE ELEVATION AND COMPACT TO 95 %. 4. AFTER OBTAINING COMPACTION APPROVAL FROM THE PROJECT REPRESENTATIVE. BACKFILL REMAINDER OF TRENCH TO SUBGRADE LEVEL 5. SCARIFY AND RECOMPACT SUBGRADE (SEE [. 6. AFTER OBTAINING COMPACTION APPROVAL FROM THE PROJECT REPRESENTATIVE, PLACE AND COMPACT BASE AND SUBBASE MATERIAL IF SHOWN. (SEE �. 7. CONSTRUCT NEW PCCP OF THE CLASS AND THICKNESS SHOWN. SEE ›). 8. DO NOT OPEN TO TRAFFIC UNTIL THE CONCRETE HAS CURED FOR A MINIMUM FLEXURAL STRENGTH OF 550 PSI. CONSTRUCTION DETAILS SEE CONCRETE MIX REQUIREMENTS ON C1.01. ® 0.25— COMPAL:I ti) CRUSHED ROCK OVER 0.25 —FEET COMPACTED GRAVEL BASE (OR MATCH EXISTING, WHICHEVER IS GREATER. © SCARIFY SUBGRADE TO 0.5' MINIMUM DEPTH AND RECOMPACT TO 95%. fEiCEIVED > UNDISTURBED SOIL OF T%KVVIL1 CONSTRUCTION JOINT, SEE DETAIL 2/C5.01. A A BY APP'D DATE Consulting Engineers 1601 Fifth Avenue Suite 1600 SeatH4 Washington 98101 -3665 (206) 62.2-5822 Fax (206) 622 -8130 DESNR@a M. EMMETT WARM K. PECK PROJECT DANACER; R MOATfAR SCALE AS NOTED APPROVED: 0. CAMPBELL SITE L0CAmN ND: CHECKED: 0. SCHWARTZ RECOLWamEM D. CRIPPEN ms Act want mom - CON1RACT NO, ONE INCH AT FULL 'y� i IF NOT ONE INCH, SCALE ACCORNNCLY King County Department of Transportation 09 MO METRO TRANSIT DIVISI °A7E • SOUTH BASE - /25 /iD FUEL /WASH GENERATOR REPLACEMENT DETAILS & NOTES DRAWING NO C5.01 SHEET NR 3 of 14 E 0 0 - col cc Z U vg o m O :o o 1 �,m 0 U od E O .1 i 8" WALL EL —0.41' EL —0.41' c, EL —0.49' \} � L THICKENED SLAB EL 0.0' EL —0.41' EL —0.46' EL —0.33' EL —0.33' EL 0.0' EL —0.41' EL 0.0' (4) 3/4" STRAIGHT ASTM F593 CW2 STAINLESS STEEL ANCHOR RODS WITH 12" EMBEDMENT WITH HEAVY HEX NUT OR ROD HEAD AT EMBEDDED END EDGE BELOW 3' -0" WALKWAY Notes: EL 0.0' L EL — 0.46'1 i .i 4' -2 7/8" 5' -0 1/2" VERIFY 14' -6" GENERATOR PAD & WALKWAY PLAN %1 SCALE: 1/2 " =1' -0" S1.01 EL —0.49' 3' -0" WALKWAY 1. Generator Pad, Wall and Walkway construction shall conform to the the Materials and Construction Requirements portions of Divisions 2, 3, 4, 5, 6, & 9 of WSDOT Standard Specifications for Road, Bridge and Municipal Construction, 2010 Edition, except as noted. 2. Concrete shall be air entrained concrete Class 4000 per WSDOT Specification 6 -02. 3. Construct concrete per WSDOT Specification 6 -02. 4. Finish formed surfaces to Class 2 Surface Finish per WSDOT Specification 6- 02.3(14)B. 5. Backfill below walkway and generator pad shall conform to one of the following: a. In dry weather, insitu material excavated and re— compacted to 95% of maximum density. b. in wet weather where 95% of maximum density cannot be achieved with insitu material, use Gravel Backfill for Foundations, Class B per WSDOT Specification 9- 03.12(1)B, compacted to 95% of maximum density. 6. Crushed Surfacing Base Course shall conform to WSDOT Specification 9- 03.9(3). 7. Construct concrete walkways per 2007 King County Road Design and Costruction Standards sections 3.03 and 3.04. 8. Gravel Backfill for Walls shall conform to WSDOT specification 9- 03.12(2). PROPERTY UNE 10" NATIVE MATERIAL PLUS 2" MULCH PER CIVIL 1 1/2" CLR 1YP 3' -0" WALKWAY S -0" GENERATOR PAD TTOP OF WALL BEYOND #5 @ 8" HORIZ #5 ® 18" MID —DEPTH WALKWAYS & CURBS 3' -0" WALKWAY #5 ® 12" I -1 TOP & BOT, EACH WAY ® PAD (1) #5 HORIZ MID — HEIGHT, EACH FACE OF PAD-( EL PER CIVIL EXISTING GRADE GRAVEL BACKF1LL FOR WALLS II-8" l #5 ® 12" (5) #5 ® HORIZ 4" CRUSHED SURFACING BASE COURSE .I1= 11=II. II =11 =11 EXCAVATION AND BACKFILL EXISTING BURIED ELECTRICAL CONDUIT, EXACT LOCATIONS AND DEPTHS NOT KNOWN, VERIFY IN FIELD REVIEWED FOR SC ECTION ALE: 3/4" =1' —O" S1 01 ('"ODE COMPLIANCE A PoRovED OCT 15 2010 / „ 1 City of Tukwila BUILDING DIVISION CORRECTION LTR# z \ --3/8" JOINT FILLED WITH PREMOLDED JOINT FILLER SPECIAL INSPECTION SCHEDULE ESTABLISHED PER 2009 IBC SECTION 110 & CHAPTER 17 ITEM CONTINUOUS INSPECTION Concrete Reinforcing placement -- Anchor bolts I X Preparation of test specimens X Concrete placement j X Curing PERIODIC NSPECTION Verification of mix X COMMENTS (d' k I, RECEIVED m ocr i 1 zo PERMIT CENTER INSPECTION SCHEDULE NOTES: 1. The items checked with an "X" shall be inspected in accordance with IBC Chapter 17 by a certified special inspector from on established testing agency. For material sampling and testing requirements, refer to specifications, and the notes. The testing agency shall send copies of all structural testing and inspection reports directly to the Project Representative, contractor and building official. Any materials which fail to meet the project specifications shall immediately be brought to the attention of the Project Representative. 2. Continuous special inspection means that the special inspector is on the site at all times observing the work requiring special inspection (IBC 1702). Periodic special inspection means that the special inspector is on site at time intervals necessary to confirm that all work requiring special inspection is in compliance. 2 UPDATED INSPECTION REQUIREMENTS BE 10/7/10 ADDED INSPECTION REQUIREMENTS No. REVISION BE BY 9/22/10 APP'D DATE 1:=1:1 Consulting Engineers 1601 Fifth Avenue. Suite 600 Seattle. Washington 9801 (206) 622 -5822 Fax (206) 622-800 DESIGNED: D CEDERLUND DRAWN: H SHI PROJECT MANAGER: R. MOATTAR SCALE: APPROVED: D. CAMPBELL SITE LOCATION NO: CHECKED: B ERICKSON SS NO MRS REQUEST: - RECOMMENDED: D. CRIPPEN CONTRACT NO ONE INCH AT FULL SIZE 1" IF NOT ONE INCH, SCALE ACCORDINGLY King County Department of Transportation METRO TRANSIT DIVISION SOUTH BASE FUEL /WASH GENERATOR REPLACEMENT GENERATOR PAD PLAN & SECTION DATE 05/25/10 DRAWING NO S1.01 SHEET NO: OF 4 14 GENERAL LEGEND I / / / / %// 1 NORTH ARROW DETAIL, DRAWING REFERENCE COb1STRUCTION NOTE POINT OF CONNECTION BOLD UNE WIGHT INDICATES NEW WORK LIGHT UNE WEIGHT INDICATES EXISTING WORK SLASHED UNE INDICATES EXISTING WORK TO BE DEMOUSHED DRAWING INDEX M0.01 LEGEND, NOTES, AM) DETNLS l 1.01 FUEL/wAsH BUI.DING PLAN DOS FROM LEAK DETECTION VALVE, DOR TO PUMP SUCTION, SUPPORT ON WALL PLUMBING LEGEND 1 PIPING !UNIFIER. SEE ABBREVIATIONS ELBOW DOWN ELBOW UP • TEE TEE ON TEE UP SOLENOID VALVE .CHECK VALVE SOIATION OR SHUT -OFF VALVE (NO), TYPE AS S REDUCER rttvthWED FOR )ODE COMPLIANCE iiPPROVED OCT 15 2010 R19°11°11111 nieir-llinkWIIVISialON PUMP SCHEDULE MARK LOCATION SERVICE • PUMP FLUID MOTOR BASIS OF DESIGN NOTES TYPE SPEED RPM FLOW (GPM) TOTAL HEAD (FT) FLUID [11 TEMP (% %DF) HP BHP P -1 WESTWALL DOR RETURN GEAR CONST 1.140 1 88 DESEL 30 1I3 024 OBERDORFERN991 (1J.(2) SCHEDULE NOTES: [11 PROVIDE WITH TEFLON SEALS . [21 PROVIDE WITH TEFC MOTOR WITH NEMA4XJUNCTION BOX USING BUILDING ELECTRICAL CONDUIT TO' EXISTING LEAK DETECTION PANEL, SEE ELECTRICAL SHEETS PAINT EXTERIOR EXPOSED PIPING DPW P1S -4021 WEATHERPROOF POLYETHYLENE TRANSITION SUMP WITH WEATHERPROOF LOCKABLE COVBL PROVIDE VEEDER ROOT COMPATIBLE SUMP SENSOR BOLLARD EXSTING CURB FUSIBLE LINK SHUT OFF VALVE 1" DOS PIPING FROM BUILDING 1' DOR PIPING TD PUMP OPW FLEXWORKS 1' FLEXIBLE 3• DOS ANT) DOR PIPING INSIDE 2'-0" MIN SINGLE 4" UNED ACCESS PIPE APT FLEXIBLE BULKHEAD BOOT FITTING OPW FLEXWORKS SWIVEL FITTINGS UTILITY BOX ACCESS AND UNDERGROUND PIPING DETAIL ( SCALE: NONE 1.40 • MNIMUM 16' BEND RADIUS EXISTING 3/4" DOS FROM LINN FUEL SYSTEM EXISTING SOLENOID VALVE • EXISTING FILTER SYSial REUSE EXISTING DAY • F TANK IN MEZZANINE, , --, R WITH HIGH tlEl LEVEL FLOAT, SEE SEQUENCE OF OPERATION CONNECT TO COSTING 2 DOR PIPING CONNECT TO EXISTING 3/4' DOS PIPING EXISTING 2' PIPING TO FUEL TANK RETURN PIPING DIAGRAM DETAIL %1- SCALE: NONE A10 1' DOS 1' DOR PLUMBING ABBREVIATIONS AW ACID WASTE A AIR, COMPRESSED AIR BDP BOTTOM OF PIPE O CAST IRON CF CHEMICAL FEED CIRC CIRCULATING CW CITY WATER DOMESTIC COLD WATER CO CLEAN OUT CA COMPRESSED AIR DI D0018ZED WATER . DW 061111ED WATER DOM DOMESTIC DOS DESEL OIL SUPPLY DOR DESEL OL RETURN DR DOOR DRAIN DF DRDIONG FOUNTAIN ES EMERGENCY SHOWER FCO FLOOR CLEAN OUT FD FLOOR DRAIN FOR FUEL 011. RETURN FOS FUEL OIL SUPPLY FOV FUEL OL VENT FPHB FREEZE PROOF HOSE BIBB G GAS GPH CAWS PER HOUR HB HOSE B HW DOMESTIC HOT WATER HWC DOMESTIC HOT WATER CIRCULATING I:4 IPC INTERNATIONAL PLUMBING CODE IW INDIRETT WASTE JAN JANITOR 3" VAPOIi1ESS MANUFACTURING, INC. 99 11)-3000 UNE LEAK DETECTOR, ROUTE DISCHARGE TO DRAIN, DRAIN FLAWS TO DL -WATER SEPARATOR PUMP P -1 TRANSITION SUMP L MV NPW NO N 0 PC PLBG PNBJ PRV RWL• RECRC RD S SS SD UPC V VA VAC VB VTR• W WC WFS Y GENERATOR SUBBASE DAY TANK WITH LOW HIGH AND HIGH -HIGH LEVEL FLOATS —� FUSIBLE UNK SHUT OFF VALVE 1' DOS 1' DOR LAVATORY MEDICAL VACUUM NON - POTABLE WATER NITROUS OXIDE; NUMBER NITROGEN OXYGEN PUMPED CONDENSATE PLUMBING PNEUMATIC PRESSURE REDUCING VALVE RAIN WATER. LEADER RECIRCULATING ROOF DRAIN 50I. SANITARY SEWER; SERVICE SINK; STAINLESS STEEL STORM DRNN UNIFORM PLUMBING CODE VENT VALVE VACUUM VACUUM BREAKER VENT THRU ROOF WASTE; WATER; WIDE(DIM) WATER' CLOSET WATER FLOW SWITCH WYE RECEIVED COY OF TUICVMA AUG 0% PERMIT CEO I: 'I REVISION SY APP.() DATE FSi consulting engineers Seattle, Washington Solutions & Service DESIONFg BPR DRAWN: DOD PROJECT MANAOfll R. MOATTAR PPROVER SCALE NONE D. CAMPBELL SITE LOCATION NO: IRIS NC: =ON uarc RECTO/M NDEO, D. CRIPPEN CONTRACT ND: ONE NM AT FULL SIZE IF NOT ONE INCH, SCALE ACCORD3W s tang County Department of Transportation METRO TRANSIT DIVISION . SOUTH BASE FUEL/WASH GENERATOR REPLACEMENT LEGEND, NOTES, AND DETAILS MTE; 05/25/10 DRAWNO ND: MO.O1 SHEET N0: OF 5 Of 14 1 UGE UGE 3a+ " V� 80n EMERGENCY GENERATOR WITH SUBBASE FUEL DAY TANK. PROVIDE HIGH LEVEL FLOAT, LOW LEVEL FLOAT FOR SOLENOID CONTROLS, AND HIGH —HIGH m6S �+ 8011 son a 9 II 11 III III 1 UNDERGROUND DOUBLE WALL FLEXIBLE CONTAINMENT PIPING FOR DOS AND DOR IN A 4. ACCESS PIP 24' MIAMI COVER nos j SAWCUT PAVEMENT, SIDEWAIX AND CURB. SEE CML SHEETS I I/ FOR EXACT LOCATION. TRENCH FOR PIPING INSTALLATION. I E PATCH PAVEMENT, SEE CML SHEETS. 1 11 T 0 0 0 0 nn (,ODE son 350 ENCY FUEL SHUTDOWN °'"------ BOLLARD, SEE CML SHEETS NOD 0 0 ROD DISCHARGE FROM LEAK DETECTION VALVE, ROUTE TO DRAIN REMOVE COSTING SECONDARY CONTAINMENT PIPING AND OTHER DAY TANK PIPING, VENT PIPING TO REMAIN. REMOVE EXISTING DAY TANK W MEZZANINE FOR RELOCATION. REMOVE PUMP «H L • '1nm SEE 2/143 FOR SECONDARY CONTAINMENT ACCESS DOR RETURN PUMP P -1, SE 1 /M0 FOR VALVING. COORDINATE EXACT LOCATION WITH KING COUNTY PROJECT MANAGER 1. DOS, DOR, ROUTE TIGHT TO ROOF STRUCTURE, USE EXISTING CONCRETE INSERTS FOR SUPPORT. REMOVE DIETING EXHAUST FAN AND PATCH ROOF El 0 0 0 0 0 00 0 0 •0 0 0 0 0 0 0 0 0 0 0 CONNECT TO DUSTING GENERATOR FUEL TRANSFER PIPING IMMEDAILY AFTER FILTERS. MAINTAIN 7' -0' CLEARANCE BELOW PIPING. REMOVE ABANDONED PIPING. RELOCATED DAY TANK WITH HIGH LEVEL FLOAT, ROUTE VENT TO DUSTING VENT PENETRATION. CONNECT TO COSTING DOR RETURN PIPING. CONTINUES UNDERGROUND TO FUEL TANK REPLACE EXISTING 3/4° DOS WITH 1' DOS, ROUTE TIGHT TO ROOF STRUCTURE REVIEWED FOR COMPLIANCE A P P O V P OCT 15 2010 City of Tukwila BUILDING.DIVIRInwi EXISTING FUEL FILTER AND SOLENOID VALVE TO REMAIN. VALVE TO BE USED FOR NEW DAY TANK CONTROLS CS6iALlig S THE GENERATOR SUBBASE DAY TANK IS FED FROM THE SUBMERSIBLE TURBINE PUMPS LOCATED IN THE UNDERGROUND STORAGE TANKS NOTE THE EX6TWG FUEL PUMPS HAVE UNE•LEAK DETECTORS. THE FUEL WASH BUILDING CONTAINS A SOLENOID VALVE TO ALLOW FLUNG THE GEIERATOR SUBBASE DAY TANK. L•; 0.11 a. L, .- i. - L:d _..-._ • u. • MOM PUMP P -1 SHALL BE CONTROLLED FROM A PROGRAMMABLE 24 HOUR TIMER INITIALLY SET TO RUN 20 MINUTES OF EVERY 24 HOUR DAY FROM 10 AM TO 10:20 AM. WHEN TIMER ENERGIZES, PUMP SHALL ENERGIZE AND PUMP FUEL WHEN TIMER DE— ENERGIZES, PUMP SHAIJ. DE— ENERGIZE. F A HIGH LEVEL IS SENSED IN THE DUSTING DAY TANK IN THE MEZZANINE, PUMP SHALL IMMEDIATELY DE— ENERGZE AND AN AUDIBLE AND VISUAL ALARM SHALL BE SET. ALARM SHALL REQUIRE MANAMA. RESET BEFORE POWER CAN BE RETURNED TO PUMP. FUEL /WASH BUILDING PLAN SCALE 1/8' 1' -0' DAYTANK RE FLL SE0(e E of Amiiot nos WHEN LOW LEVEL FLOAT IN THE GENERATOR SUBBASE DAY TANK INDICATES THE NEED FOR FUEL. EXISTING FUEL PUMPS SHALL ENERGIZE AND THE EXISTING SOLENOID VALVE SHALL OPEN AFTER AVE SECONDS. WHEN HIGH LEVEL FLOAT IN THE GENERATOR SUBBASE FUEL TANK INDICATES A FULL TANK, FUEL TRANSFER SOLENOID VALVE SHALL DE— ENERGIZE, VALVE SHALL CLOSE, AND PUMPS SHALL TURN OFF. HIGH —HIGH LEVEL FLOAT IN THE GENERATOR SUBBASE FUEL TNAK SHALL TRIGGER AN AUDIBLE AND VISUAL HARM AND TRIGGER NE EMERGENCY FUEL SHUTDOWN RELAY REMOVING POWER TD THE PUMPS. ALARM SHALL ALSO DE—ENERGIZE FUEL TRANSFER SOLENOID VALVE. ALARM SHALL REWIRE MANUAL RESET. AN EMERGENCY FUEL SHUTDOWN BUTTON SHALL BE MOUNTED NEAR NE GENERATOR WHEN BUTTON IS PUSHED, NE DAERGENCY FUEL SHUTDOWN RELAY CONTROWNG THE FUEL TRANSFER PUMPS SHALL BE TRIGGERED, REMOVING POWER TO THE PUMPS. ADDITIONALLY, ALARM SHALL DE— ENERGIZE FUEL TRANSFER SOLENOID VALVE AN AUDIBLE AND VISUAL ALARM SHALL SOUND. A LEAK DETECTION CIRCUIT WILL BE INSTALLED IN THE WEATHERPROOF TRANSITION SUMP. IF A LEAK IS DETECTED, THE EMERGENCY FUEL SHUTDOWN RELAY CONTROWNG THE FUEL TRANSFER PUMPS SWILL BE TRIGGERED, REMOVING POWER TO THE PUMPS. AN AUDIBLE AND VISUAL ALARM SHALL SOUND. ADDMONALLY, ALARM SHALL DE— ENERGIZE FUEL TRANSFER SOLENOID VALVE. ALARM SHALL REQURE MANUAL RESET. ilECENED CITY OF TUKMLA AUG 092010 PERMIT CENTER No. REVISION BY APP.D DATE FSi consulting engineers ® s Seattle, Washington Solutions & Service DES/CNED: BPR PROTECT NANI,REn. R. MOATIAR SCALE: 1/B° 1' -0° DRMDC DGD APPROVED: • D. CAMPBELL SITE LOCATION HR CHECKED: REG REOONM[NDED: D. CRIPPEN MS KR a Rtmam. - C[WIRAOT HOC ONE INCH AT DILL SIZE F NOT ONE INCH. SCALE ACCORt*MGLY a King County Department of Transportation METRO TRANSIT DIVISION SOUTH BASE FUEL/WASH GENERATOR REPLACEMENT FUEL /WASH BUILDING PLAN DATE: OS /25/10 DOMINO ND: M1.01 SHEET NO: OF 6 OF 14 R: \4858 - 004.11 \Owge \e3E0_01 5 -25-10 02: 34pm marAee POWER [N - 206 CONNECTION POINT TO EQUIPMENT SPECIFIED FURNISHED AND NSTALLED UNDER OTHER SECTIONS. RACEWAY, CONDUCTOR AND CONNECTION UNDER THIS SECTION • JUNCTION BOX NONFUSED DISCONNECT SWITCH. FUSED DISCONNECT SWITCH STARTER, MAGNETIC COMBINATION MAGNETIC MOTOR STARTER AND DISCONNECT NAMEPLATE, IDENTIFICATION TAG NUMBER, ROOM NUMBER, OR MECHANICAL EQUIPMENT DESIGNATION PANELBOARD GROUND .ROD GROUND WELL CONDUIT AND RACEWAY NEW EXPOSED CONDUIT AND THWN OR XHHW WIRES NEW UNDERGROUND CONDUIT AND THWN OR XHHW WIRES EXISTING EXPOSED CONDUIT WITH WIRING EXISTING UNDERGROUND CONDUIT WITH WIRING PNL(CKT #) vHOME RUN. REFER TO CONDUIT AND WIRE SCHEDULE FOR CONDUIT SIZE AND WIRING ---D CONDUIT TURNING DOWN O CONDUIT TURNING UP QNE -LINE DIAGRAM wJJ rYYY) rolt 100AS 100A L POWER TRANSFORMER UTILITY METER . CIRCUIT BREAKER, SIZE IN AMPS AS SHOWN DISCONNECT SWITCH, SWITCH RATING IN AMPS • GROUND • CONNECTION POINT DRAWING CONVENTIONS SECTION +� SCALE: 1' =1' =0` E1.01 1 E1.01 E1.01 GENERAL NOTES; DETAIL TITLE UNDERUNE, E1.01 '= REFERENCE WHERE DETAIL IS TAKEN A = SECTION NUMBER E1.01 = REFERENCE WHERE SECTION IS SHOWN 1 — DETAIL NUMBER E1.01 = REFERENCE WHERE DETAIL IS SHOWN 1 = IMAGE NUMBER E1.01 = REFERENCE WHERE IMAGE IS TAKEN REVISION REFERENCE DEMOUSH EQUIPMENT UNDER HATCHES I. ELECTRICAL DESIGN IS DIAGRAMAIIC ONLY AND SHALL BE ADJUSTED TO ACCOMMODATE EXISTING FIELD CONDITIONS, TEE REQUIREMENTS OF MANUFACTURER'S PRODUCTS AND CONTRACT SPECIFICATIONS WHILE MAINTAINING COMPLIANCE WITH APPLICABLE CODES. 2. ALL EECTRICAL EQUIPMENT AND HARDWARE SHALL BE UL LISTED AND INSTALLED PER MANUFACTURERS' RECOMMENDATIONS IN COMPLIANCE WITH NEC, WAC, NFPA AND CURRENT SEISMIC REQUIREMENTS. 3. INSTAL_ A GREEN EQUIPMENT GROUNDING CONDUCTOR IN ALL NON —SPARE CONDUITS 4. LABEL ALL JUNCIION AND PULL BOXES WITH PANEL NAME AND CIRCUIT NUMBER(S) OF AEI. CIRCUITS CONTAINED WITHIN TIE BOX. USE A BLACK FELT—TIP PERMANENT MARKER IN DRY UNFINISHED LOCATIONS, AND ADIESIVE— BACKED PHENOLIC ENGRAVED LABELS, WHITE WITH BLACK LEIItxS IN FINISHED AREAS. 5. FLEXIBLE METAL CLAD (TYPE MC) WIRING SHALL NOT BE USED. 6. ALL POWER WIRING SHALL BE NEW STRANDED COPPER. TYPE THAN OR XHHW WITH A MINIMUM SIZE OF ff12 AWG. • 7. ALL CONDUIT SHALL BE A MINIMUM OF 3/4'. UNDERGROUND CONDUIT SHALL BE A MINIMUM OF 1'. USE A MAXIMUM OF 18' OF SIN. —TIGHT FLEXIBLE CONDUIT FOR EQUIPMENT SUBJECT TO VIBRATION. NOISE TRANSMISSION OR MOVEMENT, AND FOR ALL MOTORS. INSTALL RACEWAYS PARALLEL AND PERPENDICULAR TO STRUCTURE AND AT PROPER ELEVATIONS. GROUP MULTIPLE CONDUIT RUNS AND NEATLY RACK AND SUPPORT FROM THE STRUCTURE KEEP ELECTRICAL CONDUITS FREE FROM CONTACT WITH OTHER DISSIMILAR METALS. 8. UGHF EWES ON PLAN DRAWINGS INDICATE EXISTING EQUIPMENT AND RAATERWLS. HEAVY UNES INDICATE NEW EQUIPMENT AND MATERIALS. SCREENED UNES INDICATE BUILDING BACKGROUND. 9. UGHT UNES ON DIAGRAMS AND CONTROL SCHEMATICS INDICATE EQUIPEMNF, DEVICES OR WIRING PROVIDED BY OTHERS. SCREENED LINES INDICATE DUSTING EQUIPMENT, DEVICES OR WIRING. A AA4MER, AMPEREIT AC ALTERNATING CURRENT . AFF ABOVE FINISHED FLOOR AFG ABOVE FINISHED GRADE ANC AMPERE INTERRUPTING CAPACITY AL ALUMINUM AS SWITCH RATING IN AMPS AWG AMERICAN WIRE GAUGE BLDG BUILDING BKR BREAKER • CONDUIT co CIRCUIT BREAKER CC COLOR CORRECTED CKT CIRCUIT COMA COMMUNICATIONS CONE CONUNUED CR CONTROL RELAY CTRL CONTROL CU COPPER DC DIRECT CURRENT DEAD DEMOLITION DET DETECTOR DIA DNMEIER DIM DIMENSION DISC DISCONNECT DWG DRAWING E]F.0 ELECTRICAL ETM ELAPSED TIME METER EXH EXHAUST DOST EXISTING F,EU FUSE FDR FEEDER FLUOR FLUORESCENT FT FOOT G,GND GROUND GFI GROUND FAULT INTERRUPTER . GRS GALVANIZED RIGID STEEL HP HORSEPOWER REVIEWED FOR CODE COMPLIANCE APDnnVEn OCT 15 2U iU City of Tukwila BUILDING DIviRin "I I/O INPUT /OUTPUT J,J —BOX JUNCTION BOX KCM THOUSAND CIRCULAR MILS KV KILOVOLT(S) KVA KILOVOLT AMPERE(S) KW KILOWATT(S) LID LIGHT EMTFDNG DIODE LTG UGHT,•LIGHTING LV LOW VOLTAGE MID MOUNTED MTR MOTOR N NEUTRAL, NEW NC NORMALLY CLOSED NO NORMALLY OPEN NTS NOT TO SCALE PH PHASE PNL PANEL PVC POLYMNYL CHLORIDE PWR POWER OL OVERLOAD RGS RIGID GALVANIZED STEEL SCHED SCHEDULE SW SWITCH SWBD SWITCHBOARD TBD TO BE DETERMINED TYP TYPICAL ✓ VOLTMETER, VOLT W WIRE, WATT W/0 WITHOUT WP WEATHERPROOF XFMR TRANSFORMER OF ` UK ILA AU6 0 PERMIT CENTER No. REVISION BY APP'D DATE ELCON ASSOCIATES, INC • ENGINEERS - CONSULTANTS 16300 CHRISTENSEN ROAD, SUITE 330 SEATTLE, WASHINGTON 98188 TEL (206) 2435022 FAX (206) 2435208 . DESx DI D. SIATERLIS ORAWtt S. TALBOTT PROJECT MANAGER R. MOATTAR WALE: AS SHOWN Ammwm D. CAMPBELL SITE amacm S BARfKOSKE EPS 144 • `oat MCC= — REDMOSEMOE3 D. CRIPPEN CONlRCCF IMr ONE INCH AT IFULL SIZE 1 F NOT ONE INCH, SCALE ACCORDINGLY itta Kites County Department of Transportation • METO TRANSIT DIVISION SOUTH BASE FUEL/WASH GENERATOR REPLACEMENT ELECTRICAL SYMBOLS AND • ABBREVIATIONS acre: 5/25/10 DRAV1140 NO: E0.01 %M HO: OF 7 14 R: \4658- 004.11Vwge \63X1_02 5 -25-10 0233pm marks T DIST. PANEL ©2 "C, 412. 1120 '3) >' RADIANT HEATER. TYP. (s) © EXISTING 750 ENGINE GENERATOR - EXISTING BATTERY CHARGER -- LADDER LOUVER - 2 "C,•4j1, 1$1G® SEE LEVEL 1 PLAN THIS SHEET FUEL /WASH BUILDING DEMOLITION PLAN - MEZZANINE - SCALE 1/4" = 1' -0" EMERGENC Y PANEL "S" —• EMERCEt CY PANEL °R" EMERGENCY PANEL RA STAND -BY PANEL, P3 STAND -BY TRANSFORMER 13 PANEL i PAW "U" VC, 3$3. 118GQ GAS FIRED WATER HEATER (8) DGSTTNG 400A© 4 -POLE ATS CONDUIT TO PANEL R 3 "C, 412/0 AL, AL CND. 0 GENERAL NOTES: 1.. REMOVE OR REWORK PORTION OF POWER AND CONTROL CONDUITS TO INTERFACE WITH NEW CONDUITS AND EQUIPMENT. KEYED NOTES: MOVE CONDUIT/WIRES FROM PANEL T TO TRANSFORMER T3. MARK BREAKER N PANEL. T AS SPARE DISCONNECT POWER AND CONTROL WIRING FROM GENERATOR PANEL AND REMOVE DGSTING GENERATOR SET. DELVER ENGNE GENERATOR SET TO KING COUNTY SHOP. COORDINATE 'ATM KING COUNTY PROJECT REPRESENTATIVE FOR SHOP LOCATION. • DISONNECT POWER AND CONTROL WIRING FROM D(ISNNG 400A ATS REMOVE EXLSIING 400A ATS AND DELIVER TO KING COUNTY SHOP. COORDINATE WITH KING COUNTY PROJECT REPRESENTATIVE FOR SHOP LOCATION. © DISCONNECT POWER AND CONTROL WRING FROM EXISTING BATTERY CHARGER AND BATTERIES AND REMOVE DUSTING BATTERY CHARGER REMOVE POWER WIRUVG FROM EXISTING CONDUIT. CONDUIT TO MAAIR. REWORK 1340 OF EXISTING CONDUIT AND RE -ROUTE TO NEW ATS-E. ® DISCONNECT POWER AND CONTROL WIRING FROM GENERATOR AND '400A ATS. REMOVE POWER CONDUIT FROM GENERATOR TO A15. REMOVE/REWORK CONTROLS CONDUIT T:YALU:NI EXISTING RECEPTACLE CIRCUIT TO ROAAIN ACTIVE E?) u I REVIEWED FOR CODE COMPLIANCE APPROVED OCT 15 2010 SEE LEVET. MEZZANINE PIM 1}IiS SHEET IT., i,A+ a tc 11 City of Tukwil* BUILEll $ IV Rink, CONDUIT TO PANE_ R FUEL /WASH BUILDING DEMOLITION PLAN - LEVEL 1 SCALE: 1/8" a 1' -0" OW OF •'VX IL A 092010 PERMIT CENTER No. REVISION BY APP'D DATE ELCON ASSOCIATES, INC ENGINEERS - CONSULTANTS 16300 CHRISTENSEN ROAD, SUITE 330 SEATTLE. WASHINGTON 88188 TEL (206) 243-5022 FAX (208) 2435205 oTSxxm D. SIATERUS omit* S. TALBOTT PROJECT uANAGEM R. MOATTAR SCALE AS SHOWN APPROVED: D. CAMPBELL ATE LOCATION No: S. BARTKOSKE Ems No: WORN wm nn — RECOMMENDER D. CRIPPETI CONTRACT NO ONE INCH AT FULL I¢E E 1 IF NOT ONE INCH, SCALE ACCORDINGLY King County Department of Transportation METRO TRANSIT DIVISION SOUTH BASE FUEL/WASH GENERATOR REPLACEMENT FUEL WASH BUILDING DEMOLITION PLAN DATE 5/25/10 MAROC NM DE1 02 SHEET NO: of B 14 0 E R: \4858- 004.11\0wg \e3DE8_01 5 -25-10 02:33pm FUEL /WASH BUILDING P MAIN DISTRIBUTION PANEL (MEZZANINE ABOVE WOMEN'S LOCKER ROOM) 1200A BUS, 480/277V, 34, 4W TO 51 -U-SO8 SEE DWG E12C 250KCM CU, 5000V, 4'C MV -90 SHIELDED & JACKETED E 4160V, UNDERGROUND CONDUITS I 51 -U -507 / / 51 -U -50Q 51 -Y -405 (Tr 600A WITH I CND FAULT TRIP /// LOAD INTERRUPTER SWITCH, 4.8 KV EJI -125E RATING . LIMITING POWER FUSES 500KVA 4160, 480Y/277V TRANSFORMER 13 0 ) 100A 1504 CO N CA M O ,D n HEATERS LOCKER ROOM BUS WASH CONTROL PANEL MST W 3'C 4-18, 16 0, 1 1/4'C. 4-13. p3 G, 1 1 /2•C 45KVA 480A: 208Y/120V DEMOLITION ONE -UNE DIAGRAM SCALE:. NONE PANEL . 'P3' 10CA BUS 100A NCB 150A BUS WASH CONTROL PANEL FAST 30KVA T1 480- 208Y/120V (4) 2AWG, 8 AWG GND 1 -I/2' C. GRS TO 51-U -505 N UNIT REPAIR SEE DWG E12B KEYED NOTES; REMOVE EXISTING ALUMINUM WIRES. 3' CONDUIT SHALL REWJN IN PLACE • EXISTING ENGINE GENERATOR SET AND MS SHAM. BE REMOVED AND RETURNED TO KING COUNTY. SEE KEYED NOTES ON SHEET DE1.02. ® REMOVE DOSIING 100A, 3-POLE CIRCUIT BREAKER AND INSTALL NEW CIRCUIT BREAKER PER DRAWING E6.01. ® DISCONNECT AND REMOVE CONDUITS AND WIRES FROM PANEL T AND TRANSFORMER T1. CONNECT TO NEW PANEL PER DRAWING E6.01. — REVIEWED FOR CODE COMPLIANCE OCT 15 2010 Hof Tukwila BUILDING DIVI,Rionu RECENED are OF MICWILA • LNA ov 201? R CENTER No. REVISION BY APP'D DATE EL-CON ASSOCIATES, INC ENGINEERS - CONSULTANTS 16300 CHRISTENSEN ROAD, SUITE 930 SEATTLE, WASHINGTON 98188 TEL (206) 243-5022 FAX (208) 243-5205 .512010 DESIGNER 0. SIATERUS DRAWN: S. TALBOTT CHECKEEk S. BARTKOSKE RECO:MENDED: D. CRIPPEN PROJECT IMAGER: R. MOA1TAR APPROFFR D. CAMPBELL US ND: WORK MUM - CONiRACT NO: SCALE: AS SHOWN are LOOMON NO€ ONE INCH AT FULL SIZE F NOT ONE INCH, SCALE ACCORDINGLY King County Department of Transportation METRO TRANSIT DIVISION SOUTH BASE FUEL/WASH GENERATOR REPLACEMENT DEMOLITION ONE -LINE DIAGRAM DATE 5/25/10 DRNNUTO DE6.01 SHEET NO: OF 9 14 J R: \4656- 004.11\Owgo\a3E1_01 5 -25 -10 C v Z (o i 'D ftr r?1 EXISTING 5KV �3— • •' CONDUIT AND CABLES x < 0 USE EXISTING MANHOLE C -,n #1/0 AWG ONP) 3. F-t-41-1— EXISTING UGHTING COIVIT AND WIRES 11/0 GEN W() TO O!2 NEUTRAL 3/4'x10 FT COPPER CLAD GROUND ROD (TYP OF 3) 150KW ENGINE - GENERATOR SET IN WEATHERPROOF ENCLOSURE. - CONCRETE PAD. SEE STRUCTURAL AND CIVIL DRAWINGS FQR EXACT LOCATION. = STLB-NP- 0^AFF7— ' AND CAP 2- 1/2 °C, 71250 KCMIL, 1,20 (1) 2#16 SHIELDED 2r PAIR (REMOTE ANNUNCIATOR) C) Lcn 7 x x AND IA CONDUIT • UGHTING AND WIRES ]` l-l-j HH rm 1- 1/2 °C, 010. 1#10G TO GENERATOR BLOCK HEATER P3(15,17), Roo J_ . 1 jX aoo BATTERY CFEeRp P3(21), AND REEPTACLE/UGHT P3(19). 1C, 6%12, 1#120 TO NEW GEN -SET DAY TANK FOR FUEL Z)MP CONTRd& 1 "C (SPARE) NEL PLAN ON DRAWING tJ.ut WR CONTINUATION. TO PANES. P3 11 NC 1 -'1 -1 1 : , 1 • „, A LB CONDULET- (TYP OF 5) 250A GENERATOR 1 SERVICE DISCONNECT RUN CONDUITS AT CEILING LEVEL BETWEEN PERUNS. STUB -OUT AND CAP CONDUIT 6" BEYOND WALL EXISTING J -BOX FOR FUEL CONTROLS FUEL/WASH BUILDING CONSTRUCTION PLAN — SITE SCALE: 1" = 10'-0" GENERATOR ENCLOSURE RECEPTACLE/ LIGHT BATTERY CHARGER GIN. BLACK HEATER 3/4 °C, 2110, 1,100 DETAIL 1 SCALE NONE TO PANEL P3 E1.01 0 ul REVIEWED FOR )DE COMPLIANCE APPRAVED OCT 15 and — City of Tukwila BUILDING DivIRinwl GRS CONDUIT BODIES (TYP) GENERATOR SERVICE DISCONNECT SWITCH -� El GENERAL NOTES: 1. LOCATION OF UNDERGROUND UTIUTIES IS FROM EXISTING DRAWINGS AND IT IS FOR INFORMATION ONLY. CONTRACTOR SHALL LOCATE ALL UTIUTITES PRIOR TO COMMENCING WORK. KEYED NOTES: • PROVIDE NAMEPLATE TO READ "GENERATOR SERVICE DISCONNECT. NORMAL POWER SERVICE DISCONNECT SWITCH IS LOCATED ON MEZZANINE LEVEL". TRANSITION UNDERGROUND CONDUITS TO EXPOSED AND RUN ON EXTERIOR WALL UP TOWARDS ROOF. PENETRATE WALL BELOW ROOF AND INSTALL LB CONDULETS ON EACH CONDUIT. SEAL CONDUIT PENETRATIONS. RUN CONDUITS ON GALVANIZED STEEL TRAPEZE IN CEIUNG BETWEEN PURUNS. 3- PROVIDE CONCRETE GROUND WELL ABOVE ONE GROUND ROO FOR TESTING. ® 5KV CONDUIT (OR DUCTBANK) SHALL BELOCATED AND PROTECTED DURING CONSTRUCTION. • UGHTING CONDUITS AND. WIRES SHALL BE LOCATED AND PROTECTED DURING CONSTRUCTION. NEMA 4X, STAINLESS STEEL J -BOX. SEE DETAIL 1 THIS SHEET. EXISTING BUILDING STAINLESS STEEL CHANNELS ,/ TO SUPPORT DISCONNECT SWITCH. FOR CONDUIT NUMBER SEE PLAN THIS SHEET 24° MIN J RECENED ON OF TUKWILA AU6 09 2010 - SECTION AT SERVICE DISCONNECT PFP4IITCENTER • SCALE: NONE E1.01 No. REVISION BY APP'D DATE Et-CON ASSOCIATES, INC ENGINEERS • CONSULTANTS 16300 CHRISTENSEN ROAD, SURE 330 SEATTLE, WASHINGTON 88168 TEL (2050 243-5022 FAX (206) 243-6206 DESIGNED: D. SIATERLLS tfUatt S. TALBOTT PROFda MANAGER: R. MOATTAR SCILe AS SHOWN APPROVED: D. CAMPBELL 91E• UTCATION N2 CHILD, S. BARMOSKE ®La MOs o aa,ccorso - RECOLUDOCErk CONTRACT N4 0. CRIPPEN — ONE INCH AT FU SIZE IF NOT ONE INCH. SCALE ACCORDINGLY King County Department of Transportation METRO TRANSIT DIVISION SOUTH BASE FUEL/WASH GENERATOR REPLACEMENT FUEL WASH BUILDING CONSTRUCTION PLAN SITE co a 5/25/10 DRAWING MCC E1 .01 SKEET NM OF 10 14 R: \4658- 004.11\pwge\e3E1_02 5 -25-10 02:38pm mode* 12W PANEL P3 L N [PUMPPUMP P1 STARTER IN NUJA 4X STEEL ENCLOSURE • 0 N_LeA CR1 11MER CONTACT HIGH HARM RESET OL PUMP P1 MOTOR - CONTROL SCHEMATIC DIAGRAM SCALE: NONE 0 X X X >( C4-) DIST. PANEL �T ---+zAL1XFT HEATER. TIP. RADIANT HEATER, Trp. x N— 2 -1 /2 "C, 4#250KCMIL, 1126 ' \-2 "C, 411 /0, 1# SPLICE BOX ABOVE BKR –E LOUVER 2 "C, 4#1/0, 1 #4CQ4 PANEL SA BKR E 2- 1/2"C, 41250 KCMIL, 1 #20 q nBKKR S L_ADDERA ,110, 1ij4G TS 2 "C, 411/0, 1140 FUEL /WASH BUILDING CONSTRUCTION PLAN - MEZZANINE SCALE: 1/4" – 1'–O" 3/4 "C, 2112, 1112G OTOR ARTER/DISCONNECT r ``y 3/4 "C, 2112, 1112G TO RELOCA EXISTING DAYTANK HIG –LEVEL CONTACT GENERATOR REMOTE ANNUNCIATOR. MOUNT AT 5'-0" A.F.F. P3(12) PUMP P1 MOTOR 3/4 "C, (1) 2116 SHIELDED TWISTED PAIR ATS –E 4 #1/0, 114G® SEE LEVEL 1 PLAN ON SHEET DE1.02 RELOCATED EXISTING DAYTANK 3/4"C, 2112, 1#12G EMERGENCY PANEL "S" EHEPURT5r P3(11) PANEL 'T" I EJ. "I P I-1/2T, WO, 11106 1"C, 318, 111 OG r-- GA' FIRED TFR H ATS –SJ PANEL "P." —. ' If GENERAL NOTES: KEYED NOTES: SEE LEVEL 1 PLAN BELOW FOR CONTINUATION. © SEE MEZZANINE PLAN ABOVE FOR CONTINUATION. ©1 "C, 4j12, 11126 TO ATS –S AND 1'C, 4112, 1#12G' TO ATS –E. ® PROVIDE NEW 2' GRS CONDUIT AND EXTEND EXISTING 2" GRS CONDUIT TO ATS –E. PROVIDE NEW WIRES TO PANEL R. © NEMA 4X STAINLESS STEEL EN�/C�L�OSSURE FOR MOTOR SIARTER/rim WED FOR CODD COMPLIANCE or1v ) OCT 15 1UlJ c1 ity of Tukwila B ILDING Dfininw R RADIANT HEATER, TYF. , EMEGENCY PANEL RA f' STAND –BY . PANEL P3 STAND –BY TRANSFORMER T3 FUEL /WASH BUILDING CONSTRUCTION PLAN - LEVEL 1 SCALE:. 1/8" = 1'-0" taECEPIED OW TUIWA AM 0 2Mai PERMIT CENTER TER No. REVISION BY APP'D DATE EECON ASSOCIATES, INC ENGINEERS 'CONSULTANTS 18300 CHRISTENSEN ROAD, SUITE 330 SEATTLE, WASHINGTON 88188 . 243-5022 TEL FAX (208) 243 -5205 MMONEM D. SIATERIJS DRAWN S. TALBOTT PROJECT IJAIMODir R. MOAITAR APPROJFID SCAM AS SHOWN D. CAMPBELL CNECKECt as Na S. BARTKOSKE *sec "mum - RECCLND1Dm: CONTRACT Na D. CRIPPEN — SITE IDCAIION NO. ONE INCH AT FU 1 IF NOT ONE INCH. SCALE ACCORDINGLY King County Department of Transportation METRP TRANSIT DIVISION SOUTH BASE FUEL/WASH GENERATOR REPLACEMENT FUEL WASH BUILDING CONSTRUCTION PLAN DATE 5/25/10 MWOM NM El .02 SKEET Na Of 11 14 FUEL/WASH BUILDING 1-17-ADP MAIN DISTRIBUTION PANEL (MEZZANINE ABOVE WOMEN'S LOCKER ROOM) 1200A BUS, 480/27N 30, 4W TO 51 -U-508 SEE DWG EI2C 25010M CU, 5000V, 4'C MV-90 SHIELDED & JACKETED I 1 51 -U -507 51 -Y -405 600A WITH CND FAULT TROP 0 41601/, UNDERGROUND CONDUITS 51 -U -506 LOAD INTERRUPTER SWITCH, 4.8 KV EA-125E • RATING UNITING POWER FUSES 500KVA 4160, 480Y/277V TRANSFORMER TO 51 -U-505 IN UNIT REPAIR SEE DWG E12B 41/0 AWG 2- 1/2"C, 4#250KCMIL, 1120 2- 1/2"C, 41250KCMIL 112G BKR -E EMERGENCY ENGINE fGENERATOR 15010% 480/277/ 0.8PF 250AT I GENERATOR SERY1E 2,50A DISCONNECT SWITCH • V 1750AF J 150AT I. - --J C, 0 51 -Y -501 4. 2'C, 411/0, 1140 CYCLONE WEST CYCLONE EAST BUS WASH CONTROL PANEL WEST 411/0,.114G<11 4 -16, 16 G, 1 1/4'C m 30KVA 4-13, 13 6, 1 1 /2 "C " 480- 208/120V 45KVA 480,N: 238Y/120V PANEL 'P3' 1O0A BUS 1004 MCB BUS WASH CONTROL PANEL EAST 30KVA TI • 480- 208Y/120V 1'C, 318, 1110G (4) 2AWG, 8 AWG GND 1 -1/2' C. GRS CONSTRUCTION ONE —LINE DIAGRAM SCALE: NONE 24'x24'x8' SPLICE BOX 2- 1 /2 "C, 41250KCM8, 1120 I 5 __J BKR -S 2'C, 411/0, 114G 150A, 4 -POLE, 480/277V ATS -S 2'C, 411/0, 1146 1 I ct>.I 550A L REVIEWED FOR CODE COMPLIANCE Oct 115*e.A City ofTukwila BUILDING Cnrccinhi WOF � JAM. 0 9 2010 PERMIT CENTER . PANEL SA i° GENERAL NOTES: 1. UGHT LINES INDICATE COSTING EQUIPMENT. HEAVY LINES INDICATE NEW EQUIPMENT AND MATERIALS. 2. ALL NEW CONDUITS SHALL BE GRS CONDUITS. KEYED NOTES: PROVIDE NEW 3' GRS CONDUIT AND EXTEND EXISTING 3' CONDUIT TO NEW ATS © PROVIDE NEW WIRES IN EXISTING 3' CONDUIT. © PROVIDE NEW 3 -POLE. 480V, SQUARE D BREAKER WITH MINIMUM OF '22K AIC RATING. ® PROVIDE NEW CABLES IN COSTING 2' CONDUIT (AND NEW CONDUIT TO AlS-E). MOLDED CASE TYPE DISCONNECT IN NEMA 4X STAINLESS STEEL. ENCLOSURE. ® SERVICE ENTRANCE GROUNDING. CONNECT TO BUILDING STEEL. COLD WATER PIPE AND GROUND RODS PER NEC. PROVIDE LOCKABLE BREAKER IN THE OFF POSITION. No REVISION BY APP•D DATE EL-CON ASSOCIATES, INC ENGINEERS • CONSULTANTS 16300 CHRISTENSEN ROAD. SUITE 330 SEATTLE, WASHINGTON 08188 TEL (206) 2495022 FAX (206) 243 -5205 mmamm D. SIATERUS PROJECI MANAGER: R. MOATTAR SCALE AS SHOWN DRona S. TALBOTT APPROVED: 0. CAMPBELL SUE tCCADON NO: CHECKED, S. BARTKOSKE RE000REHDER D. CRIPPEN IBIS NO: `oecHmaucsn — CONTRACr NO, ONE INCH AT FULL SIZE F --1 --L IF NOT ONE INCH. SCALE ACCORDINGLY King County Department of Transportation METRO TRANSIT DIVISION SOUTH BASE FUEL/WASH GENERATOR REPLACEMENT • CONSTRUCTION ONE -LINE DIAGRAM DAIS. 5/25/10 DRAWING HER E6.01 SHED' NOI OF 12 14 R: \4658- 004.11\0wge\p3E6.2 5 -25 -10 02:37pm marilee PANEL SA (STBY) BLDG FUEL/WASH TYPE NEW PANEL SURFACE OR FLUSH . SURFACE MAIN BKR. 150A RATING 225A, 480Y/277V, 3PH, 4W REF. DWGS. REVISION(s) ENGINEER ELECTRICAL. PANEL SCHEDULE BASE SOUTH DATE LOCATION MEZZANINE FEEDERS • FROM ATS -S SHORT CKT. RTC., Isym 22kAIC REVISED CKT. DATE REVISED JOB NO. Aug-04 CIRCUIT FRAMES 8c AMPS WIRE 512E DESCRIPTION HP AMPERES LOCATION a b a LOCATION 1 a I 37.0 26.0 3b 3b 50A / 3P (3) j8 PANEL P3 VIA XFMR T1 37.0 22.0 FUEL/ WASH BUILDING FUEL/WASH SE 5o I 37.0 20.0 7a 7a I - 25.0 ' 9b 9b 20A/3P - SPARE 25.0 COL 0-4 • 11c I - . 25.0 13a 13o 20A/1P - SPARE GEN ROOM 15b 15b 20A/11.• - SPARE 17o 17o 20A/1P - SPARE 19a 19a 20A/1P - SPARE 21b 21b 20A/1P - SPARE 2.0 GIN ROOM 23c 23o 20A/1P - SPARE 2.0 25o 604 / 2P SPARE ' 27b I _ 290 - - EMPTY 31a - - EMPTY 33b - - EMPTY • 35o - - EMPTY • • 2a 2a I - 2.0 4b 46 . 50A/3 - SPARE 2.0 Sc 6e I - 20 FO 8o Eto 20/1/1P - SPARE FUEL tab 106 20A/1P - SPARE ' 3.0 WASH N 12c 12o 20A/1P - SPARE 3.0 FUEL AISLES 140 14o - - • SPACE a • 16b - - SPACE 2.0 18o 18c - - SPACE • 2.0 20a 20a - - SPACE f 226 226 - - SPACE 6.0 t 24e 24o - - SPACE 6.0 26a I 21.0 286 .70A / 3P PANEL 'RA' SUBFEED 21.0 FUEL/ W DUBDIN 3oc I 21.0 SE RNER 32a - - EMPTY 8U�Lr 36c - - EMPTY 36e --- - EMPTY CONNECTED kVA . 9.4 DEMAND kVA= 10.2 28.0 22.0 20.0 TOTAL AMPS PANEL R BLDG FUEI,/WASH TYPE EXIST PANEL SURFACE OR FLUSH SURFACE MAIN BKR. 225A RATING REF. OWLS. REVISION(s) As Built ENGINEER ELECTRICAL PANEL SCHEDULE BASE SOUTH • DATE LOCATION SE CORNER Col. B-2 FEEDERS (4) #2/OAL. (1% f4 aI 0, 3-C FROM BREAKER BKR -E VIA ATS -E SHORT CKT. RTC., Isym REVISED CKT. DATE REVISED JOB NO. Aug -04 CIRCUIT FRAMES & AMPS WIRE S I Z E DESCRIPTION HP AMPERES LOCATION a I b a 1 a I 37.0 3b 50A / 3P (3).18 PANEL 5' SUBFEED 37.0 FUEL/ WASH BUILDING 5o I 37.0 • SE CORNER 7a I 25.0 ' 9b 70A / 3P (3) j8 AIR COMPRESSOR 25.0 COL 0-4 11c I 25.0 13a 20. / 1P j12 UGHRNG 8.0 GEN ROOM 15b 20A / 1P - SPARE 17o 20A / IF - SPARE 19a - I 2.0 21b 15A / 3P (3) 012 EXHAUST FAN (GLNFRATOR) 2.0 GIN ROOM 23c I 2.0 25o 604 / 2P SPARE ' 27b I _ 290 - - EMPTY 31a - - EMPTY 33b - - EMPTY 35o - - EMPTY • 2a I 2.0 4b 15A / 3P (3) #12 FP -4 LUBE OIL PUMP 2.0 Sc I . 20 FO 8o 20A / 1P j12 LIGHTING AND TIME CLOCK 3.0 FUEL tab 20A / IP j12 UCHTINO 3.0 WASH N 12c 20A / IP f 12 LIGHTING 3.0 FUEL AISLES 140 I 2.0 a 16b • 20A / 3P • (3) #12 LUBE OIL HEATER 2.0 18o I 2.0 20a I 8.0 f 226 804 / 3P (3) j2 WELDING RECEPTACLE 6.0 t 24e 1 6.0 26a I 21.0 286 .70A / 3P PANEL 'RA' SUBFEED 21.0 FUEL/ W DUBDIN 3oc I 21.0 SE RNER 32a - - EMPTY 8U�Lr 36c - - EMPTY 36e --- - EMPTY CONNECTED kVA= 89.7 DEMAND kVA= 85.9 Ground =0.35 Neutral a 11 108.0 100. 0 100.0 TOTAL AMPS 8.7 17.41 18.7 Measured Amps VIEWED FOR ononvan COMPLIANCE '; 1 �L111J of Tukwila INA nnhIQinA r RECENED , 0; TUKWILA AUG 05 MU P ROSITCEaU8EB No. REVISION BY APP'D DATE EECON ASSOCIATES, INC ENGINEERS • CONSULTANTS 16300 CHRISTENSEN ROAD, SUITE 330 • SEATTLE, WASHINGTON 98180 TEL (206) 243-5022 FAX (206) 243 -6205 D E9CRED: D. SIATERUS PROJECT MANACEA R. MOATTAR SCALE AS SHOWN DRAM S. TALBOTT APPRCNEM D. CAMPBELL SUE IDCAnoe PER S. BARTKOSKE RF.COLLUOroEEr 0. CRIPPEN IBIS N0: =NC RECNR:,R - CONTRACT NO: ONE INCH AT FULL SIZE 1. IF NOT ONE INCH, SCALE ACCORDINGLY Fang County Department of Transportation METRO TRANSIT DIVISION • SOUTH BASE FUEL/WASH GENERATOR REPLACEMENT PANEL SCHEDULES DAZE' 5/25/10 ORATING Ks E6.02 SHEET NOS OF 13 14 PANEL P3 BLDG FUEL/WASH TYPE EXIST PANEL SURFACE OR FLUSH SURFACE MAW BKR. 100A RATING 100A,.208Y/720V, 3PH, 4W REF. DWGS. REVISION(s) As Built ENGINEER ELECTRICAL PANEL SCHEDULE BASE SOUTH DATE Aug -04 LOCATION SE CORNER, Col. 0 -2 FEEDERS 4 OAL, 1 at G 3 FROM Pant SA, Circuits (1,3,5 ) via 301NA XFMR SHORT CKT. RiG., Isym REVISED CKT. DATE REVISED JOB NO. GROUT FRAMES & MAPS MARE 025 DESCRIPTION HP AMPERES LOCATION a 1 b e to 20A / IP EF-4. FP-5 12.0 3b 20A / IP EF-3, EF-8 12.0 Se 20A / 1P EF-1, EF -2 12.0 7a 20A / 1P SPARE 9b 15A / IP SPARE 110 15A/1P RADIANT HEATERS . 2.0 13a 15A/iP RADIANT HEATERS 2.0 15b 20A/2P GENERATOR BLOCK HEATER - 12.0 17c I 12.0 19a 20A(1P RECEPTACLE/LIGHT 4.0 216 20A/iP - BATTERY CHARGER 12.0 23c 25a 276 29c . 31a — 33b — 35c — 2a 20A / 1P EF-7. EF-8 120 4b 20A / 1P ROOF CFI RBCPT 10.0 6o 20A / 1P . MOTOR CTROL CRT 6.0 8a 20A / 1P SPARE 10b 15A / IP SPARE 12e 15A/1P PUMP P-1 MOTOR 7.2 • • 14a . 16b 18e • 20a 226 . 24c 26a 28b 0.0 30c 0.0 32a — — 34b — — 36e — — CONNECTED WA. 18.8 DEMAND WA— 15.7 30.0 48.0 Ground -0.35 Neutral a 11 8.7 17.4 as TOTAL AMPS 16.7 Measured Amps GENERAL NOTES: 1. NEW LOADS TO EXISTING PANEL P3 ARE SHOWN IN HEAVY (BOLD) LETTERS. OTHER LOADS (LIGHT LINES) ARE EXISTING. — REVIEWED FOR CODE PPRI OCT AWED 19 2EflJ of Tukwila B�UILDI G onnsinN RECEIVED TVOF TUKWILA IAN . 09 2010 PERMIT CENTER No. REVISION BY APP'D DATE EL-CON ASSOCIATES, INC ENGINEERS - CONSULTANTS 16300 CHRISTENSEN ROAD, SUITE 330 SEATTLE, WASHINGTON 88186 TEL (206) 243 -5022 FAX (206) 243-5205 DESIGNER D. SIAT[RUS S. TALBOTT CHECKElk 5. BARTKOSKE D. CRPPEN m mgar IAANACETn R. MOATTAR APPRdElk SCAtEs AS SHOWN D. CAMPBELL MIS NM .aa MOM — CONmACT Na: Siff IDORION Nk ONE INCH AT King 1 Department of IF NOT�ONE W , Transportation SCALE ACCORDINGLY METRO TRANSIT DMSION SOUTH BASE FUEL/WASH GENERATOR REPLACEMENT PANEL SCHEDULES DAM 5/25/10 amnia Km E6.03 11w Nk OF 14 14 FILE copy Northwest -.� revPiermit No approval is subject to errors and omissions. Approval of construction documents does not authorize the violation of any adopted code or ordinance. Receipt of approved Field Copy and conditions is acknowledged: By Date., I " City Of Tukwila REVIEWED FOR LDING DIVISION CODE COMPUAI� S U IJ 1111th DIVISION Aoo4mVED OCT 1 5 2010 GnyofTukwila BUILDINGDIVISION King County Metro Transit South Base Fuel / Wash Facility CORRECTION LTR #, 2. t'flOt' 1 Our energy working for you TM RECEIVED OCT 112010 Cummins Northwest, LLC PERMIT CENTER Washington, Oregon, Alaska & Montana Powerful Solutions. Dependable Support. Every Time 071006 Northwest August 20, 2010 SUBMITTAL TO Signal Electric FOR King County Metro Transit South Base Fuel / Wash Facility CUMMINS GENERATOR SET Model: 150 DSGAC CUMMINS AUTOMATIC TRANSFER SWITCH — POWERCOMMAND Model: OTPC 150 Cummins Northwest, LLC 4711 North Basin Avenue (97217 -3557) PO Box 2710 Portland, OR 97208 -2710 Phone 503 289 0900 Fax 503 286 5938 cumin insnorthwest. com Project Number: TBD Contact: Harry Whittaker Office: (425) 235 -3400 Direct: (425) 277 -5334 Fax: (425) 235 -8202 Email: harry.whittaker @cummins.com http: / /www.cumminsnorthwest.com Service Locations: Alaska - Anchorge; Montana - Missoula; Oregon - Coburg, Medford, Pendleton, Portland, Portland Distribution Center; Washington - Chehalis, Renton, Spokane, Yakima 070904 -05 rev. 4/06 • • • TABLE OF CONTENTS Materials Summary Exclusions Pre Startup Checklist Warranty Generator 1. Specification Sheet s -1544 2. Model Sheet d -3351 3. Power Command Digital Generator Set Control s -1566 4. Exhaust Emission Data Sheet eds -1085 5. Exhaust Compliance Specification epa -1119 6. Cooling System Data mcp -172 7. Sound Data msp -1057 8. Prototype Test Support pts -285 9. Alternator Data Sheet ads -212 10. Enclosure Specifications s -1012 11. Generator Outline Drawing 0500 -4690 (pages 1, 3) 12. Heater Outline Drawing 0500 -4662 13. Circuit Breaker Reference Drawing 0500 -4668 (pages 1, 2) 14. Circuit Breaker Detail — see Also Included 15. Wiring Diagram Genset 0630 -3625 16. Reconnect Diagram 0630 -3388 17.Interconnect Diagram 0630 -1974 (page 7) 18. Fuel Tank Outline Drawing Q1006339 Transfer Switch 1. Specification Sheet s -1270 2. Cabinet Outline Drawing 0310 -0414 (page 2) 3. Wiring Diagram 0626 -2303 Accessories 1. Circuit Breaker Detail 2. Isolator Outline Drawing 3. Battery Charger Specification 4. Battery Heater Specification 5. Interstate Battery Matrix • MATERIAL SUMMARY & SPECIFICATIONS Cummins Diesel Generator Set Model 150 DSGAC KW: 150 Hertz: 60 Phase: 3 Equipped with but not limited to the following: Voltage: 277/480 • Genset- Diese1,60Hz,150kW • Duty Rating- Standby Power • Listing -UL 2200 • Certified -EPA, Nonroad Compression Ignition, Tier 3 per 40 CFR 89 • Enclosure - Steel, Sound Attenuated, Level 3 with Exhaust System • Voltage- 277/480,3 Phase,Wye,4 Wire • Alternator- 60Hz,12 Lead, Broad Range, Full 1 Phase Output,105C • Genset Control - PowerCommand 1.1 • Exciter /Regulator -Pmg, 3 Phase Sensor • Engine Governor - Electronic, Isochronous Only • Display Language - English • Control Mounting -Left Facing • Meters -AC Output,Analog • • Stop Switch - Emergency • Alarm- Audible, Engine Shutdown • Relays- Genset Status, User Configured 12VDC • Circuit Breaker Or Entrance Box- ( Left Side Only ) • Circuit Breaker- See below • Wind Rating -150 MPH,Steel Housing • Brackets - Genset Overhead Lift, Two Point, Removable • Skidbase- Housing Ready • Separator - Fuel/Water • Engine Starter - 12 VDC Motor • Battery Charging Alternator - Normal Output • Engine Cooling -High Ambient Air Temperature • Shutdown -Low Coolant Level • Extension - Engine Coolant Drain • Coolant Heater -120 Volt Ac, Single Phase • Engine Air Cleaner -Heavy Duty • Factory Test - Varied Load, 1 Hour, 2 Step (Breakin per specs.) • Factory Test Record - Safety Shutdowns (Testing per specs ) • • Factory Test Record - Certified • Test - Independent Laboratory 11 11 Page 1 of 3 • Genset Warranty- Base (2 Year — 400 hrs.) • • Packing -Skid, Poly Bag • Rack - Battery • Extension -Oil Drain • • Cummins Automatic Transfer Switch - PowerCommand Model OTPC 150 Amps: 150 Voltage: 480 Poles: 4 Equipped with but not limited to the following: • Poles -4 • Application - Utility To Genset • Listing -UL 1008 /CSA Certification • Certification- Seismic ATS • Frequency -60 Hertz • System -3 Phase,3 Wire Or 4 Wire • Voltage -480 Vac • Cabinet -Type 1 • Control- Transfer Switch,Level 1 • Display - Digital • Terminal Block -30 Points • Transfer Switch Warranty -1 Yr Basic ( No notes stating NEC700 or 702 seen) Also Included • 300 Gallon, 24 Hour, base DAY tank. o 24 Hours usable fuel o Vent package w/ Flame arresters on normal vents per Seattle code. o Critical high, high /off, fill, low & critical low float senders. o Return pump and motor — 3 ft lift. o Pump controller panel w/ basic annunciation. o 1" Electric fuel shut -off solenoid for supply line. o 2" Std fill port for emergency fill only. o Leak detection alarm. Hazmat decal kit. o Primary tank drain w/ valve. o 18" x 12" Electrical stub up area. o Estimated dimensions: 150 "L x 42 "W • (3) O &M manual sets. • HD Starting battery and cables. • Battery Heater, 120VAC Page 2 of 3 • • • • Sens 10A battery charger, 120V installed. NFPA110 • (6) Seismic spring isolators. Shipped loose. To go under tank. • 250A LSI Circuit breaker • Upfit labor and misc. parts. • One year, 2 visit Preventative Maintenance Program. • Delivery to jobsite. FOB Truck • On site startup testing per NFPA110 with 2 Hr. Resistive load bank test. One visit. • (2) x 4 Hrs. Training session. Separate days. (Per specs.) Page 3 of 3 • • • Cummins Northwest, LLC Attachment to Quotation - Exclusions- KC Metro South Base Fuel / Wash Facility Tukwila 6 -16 -10 Exhaust System: Fuel System: Cooling System: Electrical: Mounting: Miscellaneous: All exhaust extension system installation. Emissions after treatment is not included and will be quoted upon request. All off - engine fuel piping, valves, coolers, filters, pumps, fittings, fuel storage tank & senders, annunciation, fuel for testing and initial fill of fuel. Intake louvers, exhaust louvers, air dampers, sheet metal ducting, flex adapters, sound attenuators /baffles, coolant fill for remote radiators & piping All off - engine wiring, field terminations of wiring, and lugs other than those detailed in our submittal. Generator mounting bolts and anchors. Vibration isolators (if included) for the generator will be shipped loose for installation at the jobsite by others. Third party electrical testing, generator emergency use label and certification, seismic calculations, coordination studies, stamped engineering calculations, emissions testing, pre- training information is per CNW service department data,all other services and material not specifically listed in the preceding quotation. Video of training is allowed, camera by others. *Custom designed submittals at additional cost. Please contact for quotation. Documentation: Unless stated otherwise, two sets of commercial 0 & M manuals are available upon request. Electronic documentation may be available at an additional cost *Custom designed O &Ms at additional cost. Please contact for quotation. Taxes and Permits: Any applicable sales tax, permits, licenses. All items listed are excluded and will only be supplied by Cummins Northwest, LLC if agreed upon, in writing, by a sales representative for Cummins Northwest, LLC. Current factory lead time is 10 — 11 weeks after drawing approvals. -Terms and Conditions- • This offer and quotation incorporates and is contingent upon acceptance of the terms and conditions in the standard Sales Order of Cummins Northwest, LLC. Purchase Orders or other documents with terms and conditions that are inconsistent with the CNW standard Sales Order will not be accepted unless agreed to in writing by an officer of Cummins Northwest, LLC. • Prices are valid for 30 days • If included in the quotation, all on -site startup, testing and training assumes weekdays, during standard CNW business hours. Additional charges may be added for work requested to be done on overtime, weekends, and holidays. • F.O.B. factory, freight allowed to lobsite, off- loading is not included • Factory direct shipments require credit approval prior to shipment • Terms are C.O.D. or net 30 days upon approval of credit • Equipment held for longer than 30 days may be charged a monthly storage fee • Cancellation charges are 25% minimum after release of order 120204 rev. 2/07 Northwest Cummins Northwest. LLC 811 SW Grady Way (98055) PO Box 9811 Renton. WA 98057 -3000 Phone (425) 235 -3400 Fax (425) 235 -8202 Project Name: Project Number: GENERATOR START -UP CHECK LIST If the equipment is not ready for start-up and testing, the installer will be responsible for all costs associated with the initial site visit. Start-up services will not be performed by Cummins Northwest, unless this form is returned a minimum of ten (10) business days before scheduled start-up. Please review your installation and respond to the check list below: *1. Utility power available and connected to ATS / MTS (Don't connect door plug to harness) 2. Owner / Tenant has been notified of the start-up date. 3. Can emergency loads be transferred to generator at start-up? *4. Generator mainline circuit breaker connected to ATS / MTS *5. All DC and data interconnect wires run and terminated per submittal specifications. 6. Fuel supply connected to engine with approved flexible lines. 7. Fuel available on -site and ready for testing. 8. Gas plumbing and sizing completed in accordance with submittal specifications. 9. Natural Gas and / or Propane plumbing requires a minimum 7 " -13" of water column. 10. Propane tank set up for liquid or vapor withdrawal. 11. Exhaust system installation complete including all piping and insulation. *12. Fuel day tank power connected. (Do Not Energize Circuit) 13. Remote radiator, piping, expansion tanks installed flushed, filled with coolant. *14. Engine coolant heater connected to utility (Do Not Energize Circuit) 15. Generator and isolators mounted to pad properly. 16. Radiator discharge air exhaust duct installed. 17. Intake and exhaust louvers installed and operational. 18. Generator battery / batteries on site. (Do Not Energize Circuit) *19. Battery charger power connected (Do Not Energize Circuit) 20. Other: YES NO * Items 1, 4, 5, 12, 14 & 19 - Referenced wiring must be terminated without exception. CNW is not allowed by RCW 19.28, WAC 296 -46A & WAC 296 -401 B to initially terminate this wiring. Once terminated, CNW can change or correct the wiring. Interconnect Wiring: All interconnect wiring must be installed per Cummins Power Generation interconnect wiring drawing recommendations. Fuel Plumbing: Recommended fuel line material for diesel systems is schedule 40 black iron pipe. Exhaust Piping: Recommended exhaust pipe material is schedule 40 black iron pipe. The undersigned confirms equipment is ready for startup: Return to CNW Project Manager: Printed Name Signature Date Phone: Company: Fax: Phone #: Email Address: Fax #: Form #100804 -13 rev 12/09 • Warranty Statement S • Global Commercial Warranty Statement Commercial Generating Set English Effective Date: 01- October -2009 A028U870 (Issue 2) • • Power Generation Limited Warranty Commercial Generating Set This limited warranty applies to all Cummins Power Generation® branded commercial generating sets and associated accessories (hereinafter referred to as "Product "). This warranty covers any failures of the Product, under normal use and service, which result from a defect in material or factory workmanship. Warranty Period: The warranty start dater is the date of initial start up, first rental, demonstration or 18 months after factory ship date, whichever is sooner. See table for details. Continuous Power (COP) is defined as being the maximum power which the generating set is capable of delivering continuously whilst supplying a constant electrical load when operated for an unlimited number of hours per year. No overload capability is available for this rating. Prime Power (PRP) is defined as being the maximum power which a generating set is capable of delivering continuously whilst supplying a variable electrical load when operated for an unlimited number of hours per year. The permissible average power output over 24 hours of operation shall not exceed 70% of the PRP. For applications requiring permissible average output higher than stated, a COP rating should be used. Limited -Time Running Power (LTP) is defined as the maximum power available, under the agreed operating conditions, for which the generating set is capable of delivering for up to 500 hours of operation per year. Emergency Standby Power (ESP) is defined as the maximum power available during a variable electrical power sequence, under the stated operating conditions, for which a generating set is capable of delivering in the event of a utility power outage or under test conditions for up to 200 hours of operation per year. The permissible average power output over 24 hours of operation shall not exceed 70% of the ESP. Effective Date: 01- October -2009 Page 1 of 2 Base Warranty Coverage Duration Whichever occurs first Rating Months Max. Hours COP 12 Unlimited PRP 12 Unlimited LTP 12 500 hrs * ESP 24 400 hrs t Warranty start date for designated rental and oil and gas model Products is determined to be date of receipt of Product by the end customer. Cummins Power Generation® Responsibilities: In the event of a failure of the Product during the warranty period due to defects in material or workmanship, Cummins Power Generation® will only be responsible for the following costs: • All parts and labor required to repair the Product. • Reasonable travel expenses to and from the Product site location. • Maintenance items that are contaminated or damaged by a warrantable failure. Owner Responsibilities: The owner will be responsible for the following: • Notifying Cummins Power Generation® distributor or dealer within 30 days of the discovery of failure. • Installing, operating, commissioning and maintaining the Product in accordance with Cummins Power Generation®'s published policies and guidelines. • Providing evidence for date of commissioning. • Providing sufficient access to and reasonable ability to remove the Product from the installation in the event of a warrantable failure. In addition, the owner will be responsible for: • Incremental costs and expenses associated with Product removal and reinstallation resulting from non - standard installations. • Costs associated with rental of generating sets used to replace the Product being repaired. A028U870 • Costs associated with labor overtime and premium shipping requested by the owner. • All downtime expenses, fines, all applicable taxes, and other losses resulting from a warrantable failure. Limitations: This limited warranty does not cover Product failures resulting from: • Inappropriate use relative to designated power rating. • Inappropriate use relative to application guidelines. • Normal wear and tear. • Improper and /or unauthorized installation. • Negligence, accidents or misuse. • Lack of maintenance or unauthorized repair. • Noncompliance with any Cummins Power Generation® published guideline or policy. • Use of improper or contaminated fuels, coolants or lubricants. • Improper storage before and after commissioning. • Owner's delay in making Product available after notification of potential Product problem. • Use of steel enclosures within 60 miles of the coast of salt water when aluminum or an alternate non - corrosive material enclosure option is available. • Replacement parts and accessories not authorized by Cummins Power Generation®. • Use of Battle Short Mode. • Owner or operator abuse or neglect such as: operation without adequate coolant or lubricants; overfueling; overspeeding; lack of maintenance to lubricating, cooling or air intake systems; late servicing and maintenance; improper storage, starting, warm -up, run -in or shutdown practices, or for progressive damage resulting from a defective shutdown or warning device. • Damage to parts, fixtures, housings, attachments and accessory items that are not part of the generating set. This limited warranty does not cover costs resulting from: • Difficulty in gaining access to the Product. • Repair of cosmetic damage to enclosures. Please contact your local Cummins Power Generation® Distributor for clarification concerning these limitations. Effective Date: 01- October -2009 Page 2 of 2 CUMMINS POWER GENERATION® RIGHT TO FAILED COMPONENTS: Failed components claimed under warranty remain the property of Cummins Power Generation®. Cummins Power Generation® has the right to reclaim any failed component that has been replaced under warranty. Extended Warranty: Cummins Power Generation® offers several levels of Extended Warranty Coverage. Please contact your local Cummins Power Generation ® Distributor for details. www.cumminspower.com THE WARRANTIES SET FORTH HEREIN ARE THE SOLE WARRANTIES MADE BY CUMMINS POWER GENERATION ® IN REGARD TO THE PRODUCT. CUMMINS POWER GENERATION® MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, OR OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT IS CUMMINS POWER GENERATION® LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. This limited warranty shall be enforced to the maximum extent permitted by applicable law. This limited warranty gives the owner specific rights that may vary from state to state or from jurisdiction to jurisdiction. Product Model Number: Product Serial Number: Date in Service: A028U870 • Warranty Statement • • Global Power Electronics Warranty Statement Pacatteling-Systern-- Transfer Switch English Effective Date: 01-October-2009 A029Y876 (Issue 1) Limited Warranty Transfer Switch and Paralleling Systems This limited warranty applies to all Cummins Power Generation® branded Transfer Switches, Paralleling Systems and associated accessories (hereinafter referred to as "Product "). This warranty covers any failures of the Product, under normal use and service, which result from a defect in material or factory workmanship. Warranty Period: The warranty start date is the date of commissioning', demonstration or 18 months after factory ship date, whichever is sooner. t Date of commissioning not to exceed date of Generator Set initial start-up. Transfer Switch Coverage Duration: The warranty coverage duration for Transfer Switches is defined in the table below for the different product families: Product Family Duration GTEC, LT, LC, • 1 Year: Parts, Labor & Travel RSC, R *, OTEC PLTO, PLTH, • 2 Years: Parts, Labor & Travel PLTS, PLTE Other Power Transfer Devicestt • 2 Years: Parts, Labor & Travel • Years 0 -2: Parts, Labor &Travel OT, OTPC, BTPC, • Years 3 -5: Parts Only OHPC, CHPC • Years 6 -10: Main Contacts Only tt Devices manufactured by Cummins Power Generation that allow power transfer between two power sources. Paralleling Systems Coverage Duration: The warranty coverage duration for Paralleling Systems is for a period of 2 Years from the warranty start date. Effective Date: 01- October -2009 Page 1 of 2 Cummins Power Generation® Responsibilities: In the event of a failure of the Product during the warranty period due to defects in material or workmanship, Cummins Power Generation® will only be responsible for the following costs: • All parts and labor required to repair the Productttt. • Reasonable travel expenses to and from the Product site locationt't. m Years 0 -2 only for OT, OTPC, BTPC, OHPC & CHPC family of Transfer Switches. Owner Responsibilities: The owner will be responsible for the following: • Notifying Cummins Power Generation® distributor or dealer within 30 days of the discovery of failure. • Installing, operating, commissioning and maintaining the Product in accordance with Cummins Power Generation®'s published policies and guidelines. • Providing evidence for date of commissioning. • Providing sufficient access to and reasonable ability to remove the Product from the installation in the event of a warrantable failure. In addition, the owner will be responsible for: • Incremental costs and expenses associated with Product removal and reinstallation resulting from non - standard installations. • Costs associated with rental of power generating equipment used to replace the Product being repaired. • Costs associated with labor overtime and premium shipping requested by the owner. • All downtime expenses, fines, all applicable taxes, and other losses resulting from a warrantable failure. A029Y876 • • Limitations: This limited warranty does not cover Product failures resulting from: • Inappropriate use relative to designated power rating. • Inappropriate use relative to application guidelines. ■ Non - conformance to applicable industry standards for installation • Normal wear and tear. • Improper and /or unauthorized installation. • Negligence, accidents or misuse. • Lack of maintenance or unauthorized repair. • Noncompliance with any Cummins Power Generation® published guideline or policy. • Improper storage before and after commissioning. • Owner's delay in making Product available after notification of potential Product problem. • Use of steel enclosures within 60 miles of the coast of salt water when aluminum or an alternate non - corrosive material enclosure option is available. • Replacement parts and accessories not authorized by Cummins Power Generation®. • Owner or operator abuse or neglect such as: late servicing and maintenance and improper storage. • Damage to parts, fixtures, housings, attachments and accessory items that are not part of the transfer switch or paralleling system. This limited warranty does not cover costs resulting from: ■ Difficulty in gaining access to the Product. ■ Repair of cosmetic damage to enclosures. Please contact your local Cummins Power Generation® Distributor for clarification concerning these limitations. CUMMINS POWER GENERATION® RIGHT TO FAILED COMPONENTS: Failed components claimed under warranty remain the property of Cummins Power Generation®. Cummins Power Generation® has the right to reclaim any failed component that has been replaced under warranty. Extended Warranty: Cummins Power Generation® offers several levels of Extended Warranty Coverage. Please contact your local Cummins Power Generation ® Distributor for details. 0 www.cumminspower.com Effective Date: 01- October -2009 Page 2 of 2 THE WARRANTIES SET FORTH HEREIN ARE THE SOLE WARRANTIES MADE BY CUMMINS POWER GENERATION ® IN REGARD TO THE PRODUCT. CUMMINS POWER GENERATION® MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, OR OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT IS CUMMINS POWER GENERATION® LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. This limited warranty shall be enforced to the maximum extent permitted by applicable law. This limited warranty gives the owner specific rights that may vary from state to state or from jurisdiction to jurisdiction. Product Model Number: Product Serial Number: Date in Service: A029Y876 Diesel generator set • QSB7 series engine EPA emissions i • Description Cummins Power Generation commercial generator sets are fully integrated power generation systems providing optimum performance, reliability,and versatility for stationary standby and prime power applications. ISO 9001 This generator set is designed in facilities certified to ISO 9001 and manufactured in facilities certified to ISO 9001 or ISO 9002. The Prototype Test Support (PTS) program verifies the performance integrity of the generator set design. Cummins Power Generation products bearing the PTS symbol meet the prototype test requirements of NFPA 110 for Level 1 systems. All low voltage models are CSA certified to product class 4215 -01. The generator set is available Listed to UL2200, Stationary Engine Generator Assemblies. Engine certified to U.S. EPA Nonroad Source U.S. EPA Emissions Standards, 40 CFR 89, Tier 3. Features Cummins heavy -duty engine - Rugged 4- cycle, industrial diesel delivers reliable power, low emissions and fast response to load changes. Alternator - Several alternator sizes offer selectable motor starting capability with low reactance 2/3 pitch windings, low waveform distortion with non - linear loads and fault clearing short- circuit capability. Control system - The PowerCommande 1.1 electronic control is standard equipment and provides total genset system integration including automatic remote starting /stopping, precise frequency and voltage regulation, alarm and status message display, output metering, auto - shutdown at fault detection and NFPA 110 Level 1 compliance. The optional PowerCommand 2.2 control is UL 508 Listed and provides AmpSentry '" protection. Cooling system - Standard integral set - mounted radiator system, designed and tested for rated ambient temperatures, simplifies facility design requirements for rejected heat. Enclosures - Optional weather protective and sound attenuated enclosures are available. NFPA - The genset accepts full rated load in a single step in accordance with NFPA 110 for Level 1 systems. Warranty and service - Backed by a comprehensive warranty and worldwide distributor network. 02008 I Cummins Power Generation Inc. I All rights reserved I Specifications subject to change without notice I Cummins Power Generation and Cummins are registered trademarks of Cummins Inc. PowerCommand, InPower and Our energy working for you." are trademarks of Cummins Power Generation. Other company, product or service names may be trademarks or service marks of others. S -1544g (9/08) Standby rating < Prime rating Continuous rating Data sheets Model 60 Hz 50 Hz kW IkVAI 60 Hz kW IkVAI 50 Hz kW IkVAI 60 Hz kW IkVAI 50 Hz kW IkVAI 60 Hz 50 Hz kW IkVA1 DSGAA 100 (125) 90 (113) D -3349 DSGAB 125 (156) 113 (141) 0-3350 DSGAC 135 (169) D -3351 150 (188)4— 02008 I Cummins Power Generation Inc. I All rights reserved I Specifications subject to change without notice I Cummins Power Generation and Cummins are registered trademarks of Cummins Inc. PowerCommand, InPower and Our energy working for you." are trademarks of Cummins Power Generation. Other company, product or service names may be trademarks or service marks of others. S -1544g (9/08) Generator set specifications Governor regulation class ISO 8528 Part 1 Class G3 Voltage regulation, no load to full load ± 1% Random voltage variation ± 0.5% Frequency regulation lsochronous Random frequency variation ± 0.25% Radio frequency emissions compliance Meets requirements of most industrial and commercial applications. Engine specifications Bore 107 mm (4.21 in) Stroke 124.0 mm (4.88 in) Displacement 6.69 L (408 in') Configuration Cast iron, in -line, 6 cylinder Battery capacity 1100 amps minimum at ambient temperature of -18 °C to 0 °C (0 °F to 32 °F) Battery charging alternator 100 amps Starting voltage 12 volt, negative ground Fuel system Direct injection: number 2 diesel fuel, fuel filter, automatic electric fuel shutoff Fuel filter Single element, 10 micron filtration, spin -on fuel filter with water separator Air cleaner type Dry replaceable element Lube oil filter type(s) Spin -on, full flow Standard cooling system High ambient radiator Alternator specifications Design Brushless, 4 pole, drip proof revolving field Stator 2/3 pitch Rotor Single bearing, flexible discs Insulation system Class H Standard temperature rise 150 °C standby at 40 °C ambient Exciter type Torque match (shunt) standard, PMG optional Phase rotation A (U), B (V), C (W) Alternator cooling Direct drive centrifugal blower fan AC waveform total harmonic distortion < 5% no load to full linear load, < 3% for any single harmonic Telephone influence factor (TIF) < 50 per NEMA MG1 -22.43 Telephone harmonic factor (THF) < 3 Available voltages 60 Hz Three phase line - neutral /line -line 60 Hz Single phase line - neutral /line -line • 110/190 • 110/220 • 115/200 • 115/230 Delta • 120/208 • 120/240 Delta • 127/220 • 139/240 • 220/380 • 230/400 • 240/416 • 255/440 277/480 • 347/600 • 110/220 • 115/230 • 120/240 • Note: Consult factory for other voltages. Generator set options and accessories Engine Alternator ❑ 120 V 150 W lube oil heater► •105 °C rise 120/240 V 1500 W coolant ❑ 125 °C rise heater ❑ 120 V 100 W anti - condensation Fuel System heater ❑ 24 hour sub -base tank (dual PMG excitation wall) ❑ Single phase Exhaust system ❑ ❑ Heavy duty exhaust elbow ❑ Slip on exhaust connection Generator set Battery - Interstate Battery charger -SENS ❑ ❑ Enclosure: aluminum, steel, weather protective or sound attenuated ❑ Main line circuit breaker 0 D • Note: Some options may not be available on all models - consult factory for availability. Our energy working for YOU.TM www.cumminsoowar.com ©2008 I Cummins Power Generation Inc. I All rights reserved I Specifications subject to change without notice I Cummins Power Generation and Cummins are registered trademarks of Cummins Inc. PowerCommand, InPower and Our energy working for you." are trademarks of Cummins Power Generation. Other company, product or service names may be trademarks or service marks of others. S -15448 (9/081 PowerCommand Network Communications Module (NCM) Remote annunciator panel Spring isolators - VMC UL 2200 Listed 2 year prime power warranty 2 year standby power warranty 5 year basic power warranty Power Generation Control system PCC 1302 PowerCommand control is an integrated generator set control system providing voltage regulation, engine protection, operator interface and isochronous governing (optional). Major features include: - Battery monitoring and testing features and smart starting control system. - Standard PCCNet interface to devices such as remote annunciator for NFPA 110 applications. - Control boards potted for environmental protection. - Control suitable for operation in ambient temperatures from -40 °C to +70 °C ( -40 °F to +158 °F) and altitudes to 5000 meters (13,000 feet). - Prototype tested; UL, CSA, and CE compliant. - InPower PC -based service tool available for detailed diagnostics. Operator /display panel - Manual off switch - Alpha- numeric display with pushbutton access for viewing engine and alternator data and providing setup, controls and adjustments (English or international symbols) - LED lamps indicating genset running, not in auto, common warning, common shutdown, manual run mode and remote start - Suitable for operation in ambient temperatures from -20 °C to +70 °C - Bargraph display (optional) AC protection - Over current warning and shutdown - Over and under voltage shutdown - Over and under frequency shutdown - Over excitation (loss of sensing) fault - Field overload Engine protection - Overspeed shutdown - Low oil pressure warning and shutdown - High coolant temperature warning and shutdown - Low coolant level warning or shutdown - Low coolant temperature warning - High, low and weak battery voltage warning - Fail to start (overcrank) shutdown - Fail to crank shutdown - Redundant start disconnect - Cranking lockout - Sensor failure indication - Low fuel level warning or shutdown - Fuel -in- rupture -basin warning or shutdown Alternator data - Line -to -line and Line -to- neutral AC volts - 3 -phase AC current - Frequency - Total kVa Engine data - DC voltage - Lube oil pressure - Coolant temperature - Engine speed Other data - Genset model data - Start attempts, starts, running hours - Fault history - RS485 Modbus interface - Data logging and fault simulation (requires InPower service tool) Digital governing (optional) Q - Integrated digital electronic isochronous governor - Temperature dynamic governing Digital voltage regulation - Integrated digital electronic voltage regulator - 2 -phase line -to -line sensing - Configurable torque matching Control functions - Time delay start and cooldown - Cycle cranking - PCCNet interface - (2) Configurable inputs - (2) Configurable outputs - Remote emergency stop - Glow plug control (some models) Options Auxiliary output relays (2) ❑ 120/240 V, 100 W anti - condensation heater ❑ Remote annunciator with (3) configurable inputs and configurable outputs PMG alternator excitation ❑ PowerCommand iWatch web server for remote monitoring and alarm notification (loose) ❑ Auxiliary, configurable signal inputs (8) and configurable relay outputs (8) Digital governing AC output analog meters (bargraph) - Color -coded graphical display of: - 3 -phase AC voltage - 3 -phase current - Frequency - kVa ❑ Remote operator panel ❑ PowerCommand 2.2 control with AmpSentry protection For further detail see document S -1531. Our energy working for you TM www.cumm inspower.com 02008 I Cummins Power Generation Inc. I All rights reserved I Specifications subject to change without notice I Cummins Power Generation and Cummins are registered trademarks of Cummins Inc. PowerCommand, InPower and Our energy working for you." are trademarks of Cummins Power Generation. Other company, product or service names may be trademarks or service marks of others. S -15448 (9/08) (4) Power Generation • • Ratings definitions Emergency standby power (ESP): 4 Applicable for supplying power to varying electrical load for the duration of power interruption of a reliable utility source. Emergency Standby Power (ESP) is in accordance with ISO 8528. Fuel Stop power in accordance with ISO 3046, AS 2789, DIN 6271 and BS 5514. Limited -time running power (LTP): Applicable for supplying power to a constant electrical load for limited hours. Limited Time Running Power (LTP) is in accordance with ISO 8528. Prime power (PRP): Applicable for supplying power to varying electrical load for unlimited hours. Prime Power (PRP) is in accordance with ISO 8528. Ten percent overload capability is available in accordance with ISO 3046, AS 2789, DIN 6271 and BS 5514. Base load (continuous) power (COP): Applicable for supplying power continuously to a constant electrical load for unlimited hours. Continuous Power (COP) in accordance with ISO 8528, ISO 3046, AS 2789, DIN 6271 and BS 5514. fill' '11111.111 -°.1111111 This outline drawing is for reference only. See respective model data sheet for specific model outline drawing number. Do not use for installation design Model Dim "A" mm (in.) Dim "B" mm (in.) Dim "C" mm (in.) Set Weight* dry kg (Ibs) Set Weight* wet kg (Ibs) DSGAA 2656 (104.6) 1100 (43.3) 1549 (61) 1180 (2602) DSGAB 2666 (101.6) 1100 (13.2) 1610 — 1:K6 (61) (2700) DSGAC 2656 (104.6) 1100 (43.3) 1549 (61) 1263 (2784) Note: Weights represent a set with standard features. See outline drawings for weights of other configurations. Cummins Power Generation 1400 73'" Avenue N.E. Minneapolis, MN 55432 USA Telephone: 763 574 5000 Fax: 763 574 5298 Warning: Back feed to a utility system can cause electrocution and /or property damage. Do not connect to any building's electrical system except through an approved device or after building main switch is open. Our energy working for you.n4 www.cumminspower.com 02008 I Cummins Power Generation Inc. I All rights reserved I Specifications subject to change without notice I Cummins Power Generation and Cummins are registered trademarks of Cummins Inc. PowerCommand, InPower and "Our energy working for you." are trademarks of Cummins Power Generation. Other company, product or service names may be trademarks or service marks of others. 5 -1544g (9/08) Power Generation • Model: Frequency: Fuel type: KW rating: Emissions level: DSGAC 60 Diesel 150 standby 135 prime EPA Nonroad Tier 3 • Exhaust emission data sheet: EDS -1085 Exhaust emission compliance sheet: EPA -1119 Sound performance data sheet: MSP -1057 Cooling performance data sheet: MCP -172 Prototype test summary data sheet: PTS -285 Standard set - mounted radiator cooling outline: 500 -4659 Optional set- mounted radiator cooling outline: 1/2 Optional heat exchanger cooling outline: Full Optional remote radiator cooling outline: 1/2 Fuel consumption Standby < Prime Continuous kW (kVA) kW (kVA) kW (kVA) Ratings 150 (188) 135 (169) Load 1/4 1/2 3/4 Full 1/4 1/2 3/4 Full Full US gph 3.80 6.62 9.15 12.25 3.52 6.06 8.31 10.56 L/hr 14.4 25.1 34.7 46.4 13.3 22.9 31.5 40.0 Lube oil capacity, L (qt) Engine Standby I Prime rating Continuous rating rating Engine manufacturer Cummins Maximum fuel flow with C174, L/hr (US gph) Engine model QSB7 -G3 NR3 Configuration Cast iron, in -line, 6 cylinder (5) Aspiration Turbocharged and air -to -air aftercooled 152 Gross engine power output, kWm (bhp) 186 (250) 162 (217) BMEP at set rated load, kPa (psi) 1703 (247) 1532 (222) Bore, mm (in) 107 (4.21) Stroke, mm (in) 124 (4.88) Rated speed, rpm 1800 Piston speed, m/s (ft/min) 7.4 (1464) Compression ratio 17.3:1 Lube oil capacity, L (qt) 17.5 (18.5) Overspeed limit, rpm 2100 Regenerative power, kW 20.4 Fuel flow Maximum fuel flow, L/hr (US gph) 106 (28) Maximum fuel flow with C174, L/hr (US gph) Maximum fuel inlet restriction with clean filter, mm Hg (in Hg) 127 (5) Maximum return restriction, mm Hg (in Hg) 152 (6) ©2008 Cummins Power Generation Inc. All rights reserved. Cummins Power Generation and Cummins are registered trademarks of Cummins Inc. "Our energy working for you." is a trademark of Cummins Power Generation. Specifications are subject to change without notice. D-3351 c (10/08) • • • Air Standby rating Prime rating Continuous rating Combustion air, m3 /min (scfm 14.4 (510) 13.9 (490) Maximum air cleaner restriction with clean filter, kPa (in H2O) 3.7 (15) Alternator cooling air, m3 /min (cfm 41.3 (1460) Exhaust Exhaust flow at set rated load, m3 /min (cfm) 35.6 (1256) 33.3 (1175) Fan load, kWm (HP) Exhaust temperature, ° C (0 F) 496 (924) 474 (885) Coolant capacity (with radiator), L (US Gal) Maximum back pressure, kPa (in H2O) 10 (40) 10 (40) Cooling system air flow, m3 /min (scfm) Standard set - mounted radiator cooling Ambient design, ° C (0 F) 50 (122) Fan load, kWm (HP) 6.5 (8.7) 6.5 (8.7) Coolant capaci with radiator), L (US Gal.) Coolant capacity (with radiator), L (US Gal) 23 (6.1) 23 (6.1) Cooling system air flow, m3 /min (scfm) 324 (11450) 324 (11450) Total heat radiated to room, MJ /min (Btu /min) Total heat rejection, MJ /min (Btu /min) 8.52 (8071) 7.72 (7318) Maximum cooling air flow static restriction, kPa (in H2O) 0.12 (0.5) tional set - mounted radiator cooling Amble design, °C ( °F) Fan load, k (HP) Coolant capaci with radiator), L (US Gal.) Heat rejected, aftercooler circuit, MJ /min (Btu /min) Cooling system air , m3 /min (scfm) Heat rejected, fuel circuit, MJ /min (Btu /min) Total heat rejection, MJ ' (Btu /min) Total heat radiated to room, MJ /min (Btu /min) Maximum cooling air flow sta ' restriction, kPa (in. H2O) Maximum raw water pressure, jacket water circuit, kPa (psi) Optional heat exchan :: cooling Set coolant capacity, L (US Gal.) Heat rejected, jacket water circuit, MJ /min (Btu/ '4 Heat rejected, aftercooler circuit, MJ /min (Btu /min) Heat rejected, fuel circuit, MJ /min (Btu /min) Total heat radiated to room, MJ /min (Btu /min) Maximum raw water pressure, jacket water circuit, kPa (psi) Maximum raw water pressure, aftercooler circuit, kPa (psi) Maximum raw water pressure, fuel circuit, kPa (psi) Maximum raw water flow, jacket water circuit, Umin (US GaVmin) Maximum raw water flow, aftercooler circuit, Umin (US Gal /min) Maximum raw water flow, fuel circuit, Umin (US GaVmin) Minimum raw water flow at 27 °C (80 °F) inlet temp, jacket water circuit, Umin (US Gal /min) Minimum raw water flow at 27 °C (80 °F) inlet temp, aftercooler circuit, Umin (US Gal /min) Minimum raw water flow at 27 °C (80 °F) inlet temp, fuel circuit, Umin (US Gal /min) Raw water delta P at min flow, jacket water circuit, kPa (psi) Raw water delta P at min flow, aftercooler circuit, kPa (psi) Raw water delta P at min flow, fuel circuit, kPa (psi) Maximum jacket water outlet temp, °C ( °F) Maximum aftercooler inlet temp, °C ( °F) Maximum aftercooler inlet temp at 25 °C (77 °F) ambient, °C ( °F) Our energy working for YOU.TM www.cumminsoower.com 02008 Cummins Power Generation Inc. All rights reserved. Cummins Power Generation and Cummins are registered trademarks of Cummins Inc. "Our energy working for you." Is a trademark of Cummins Power Generation. Specifications are subject to change without notice. D-3351c (10/08) Power Generation 'onal remote radiator cooling' Standby rating Prime rating Continuous rating Set coolant ca ity, L (US gal) Applicable for supplying power Max flow rate at max ion head, jacket water circuit, Umin (US gal /min) Applicable for supplying power Max flow rate at max friction hea , rcooler circuit, Umin (US gal/min) to a constant electrical load for Heat rejected, jacket water circuit, MJ /min (Btu continuously to a constant duration of power interruption of a limited hours. Limited Time Heat rejected, aftercooler circuit, MJ /min (Btu /min) electrical load for unlimited reliable utility source. Emergency Running Power (LTP) is in Heat rejected, fuel circuit, MJ /min (Btu /min) hours. Continuous Power (COP) Total heat radiated to room, MJ /min (Btu /min) accordance with ISO 8528. Maximum friction head, jacket water circuit, kPa (psi) is in accordance with ISO 8528, ISO 3046, AS 2789, DIN 6271 Maximum friction head, aftercooler circuit, kPa (psi) Maximum static head, jacket water circuit, m (ft) and BS 5514. Maximum static head, aftercooler circuit, m (ft) Maximum jacket water outlet temp, °C ( °F) Maximum aftercooler inlet temp at 25 °C (77 °F) ambient, °C ( °F) Maximum aftercooler inlet temp, °C ( °F) Maximum fuel flow, Uhr (US gph) Maximum fuel return line restriction, kPa (in Hg) Weights Unit dry weight kgs (lbs.) Unit wet weight kgs (lbs.) 1263 (2784) Notes: ' For non - standard remote installations contact your local Cummins Power Generation representative. 'Weights represent a set with standard features. See outline drawing for weights of other configurations. Derating factors Standby Prime Engine power available up to 2621 m (8600 ft) at ambient temperature up to 40° C (104° F) and 1981 m (6500 ft) at 50° C (122° F). Consult your Cummins Power Generation distributor for temperature and ambient requirements outside these parameters. Engine power available up to 2255 m (7400 ft) at ambient temperature up to 40° C (104° F) and 1707 m (5600 ft) at 50° C (122° F). Consult your Cummins Power Generation distributor for temperature and ambient requirements outside these parameters. Continuous Ratings definitions Emergency standby power (ESP): ,---- Limited -time running power (LTP): Prime power (PRP): Base load (continuous) power (COP): Applicable for supplying power to Applicable for supplying power Applicable for supplying power Applicable for supplying power varying electrical load for the to a constant electrical load for to varying electrical load for continuously to a constant duration of power interruption of a limited hours. Limited Time unlimited hours. Prime Power electrical load for unlimited reliable utility source. Emergency Running Power (LTP) is in (PRP) is in accordance with ISO hours. Continuous Power (COP) Standby Power (ESP) is in accordance with ISO 8528. Fuel accordance with ISO 8528. 8528. Ten percent overload capability is available in is in accordance with ISO 8528, ISO 3046, AS 2789, DIN 6271 Stop power in accordance with ISO 3046, AS 2789, DIN 6271 and accordance with ISO 3046, AS 2789, DIN 6271 and BS 5514. and BS 5514. BS 5514. Our energy working for you.TM www.cumminspower.com 02008 Cummins Power Generation Inc. All rights reserved. Cummins Power Generation and Cummins are registered trademarks of Cummins Inc. "Our energy working for you." is a trademark of Cummins Power Generation. Specifications are subject to change without notice. D -3351c (10/08) Power Generation Alternator data Three Phase Table' 105' C 105' C 105' C 12W C 125° C 125' C 125' C 125° C 150' C 150' C 150" C Feature Code B418 B415 B304 B417 B414 6267 B246 6303 B416 8413 B419 Alternator Data Sheet Number 210 210 209 210 210 212 209 209 210 209 208 Voltage Ranges 110/190 Thru 120/208 220/380 Thru 240/416 120/208 Thru 139/240 240/416 Thru 277/480 347/600 110/190 Thru 120/208 220/380 Thru 240/416 120/208 Thru 139/240 240/416 Thru 277/480 120/208 Thru 139/240 240/416 Thru 277/480 139/240 277/480 347/600 110/190 Thru 120/208 220/380 Thru 240/416 120/208 Thru 139/240 240/416 Thru 277/480 347/600 Surge kW 165 165 166 165 165 167 166 166 165 164 164 Motor Starting kVA (at 90% sustained voltage) Shunt 563 563 516 563 563 770 516 516 563 516 422 PMG 663 663 607 663 663 920 607 607 663 607 497 Full Load Current - Amps at Standby Rating 120/208 127/220 139/240 220/380 240/416 254/44i 246 417 625 277/480 47/600 521 493 452 285 261 226 181 Single Phase Table 105' C 105' C 125' C 124' C 12W C 150' C Feature Code B418 B415 6417 B414 B267 6413 Alternator Data Sheet Number 210 210 210 210 212 209 Voltage Ranges 120/2402 120/2402 120/2402 120/2402 120/240' 120/2402 Surge kW 152 152 152 152 164 152 Motor Starting kVA (at 90% sustained voltage)' Shunt 330 330 330 330 420 305 PMG 385 385 385 385 500 360 Full Load Current - Amps at Standby Rating 120/2402 120/240' - 417 625 ' Single phase power can be taken from a three phase generator set at up to 2/3 set rated 3 -phase kW at 1.0 power factor. Also see Note 3 below. 2 The broad range alternators can supply single phase output up to 2/3 set rated 3 -phase kW at 1.0 power factor. The extended stack (full single phase output) and 4 lead alternators can supply single phase output up to full set rated 3 -phase kW at 1.0 power factor. Formulas for calculating full load currents: Three phase output Single phase output kW x 1000 kW x Single Phase Factor x 1000 Voltage x 1.73 x 0.8 Voltage Cummins Power Generation 1400 73'" Avenue N.E. Minneapolis, MN 55432 USA Telephone: 763 574 5000 Fax: 763 574 5298 Warning: Back feed to a utility system can cause electrocution and /or property damage. Do not connect to any building's electrical system except through an approved device or after building main switch is open. Our energy working for YOU.TM www.cumminsoower.com 102008 Cummins Power Generation Inc. All rights reserved. Cummins Power Generation and Cummins are registered trademarks of Cummins Inc. "Our energy working for you." is a trademark of Cummins Power Generation. Specifications are subject to change without notice. D-3351 c (10/08) Power Generation PcnwerrCcprrnmand control arerR®m NOT IN AUTOAy.� :,!rS WN'ti' NAR,ING' REM;. REMOTE STAR AIMW"V T71 ry AUTO MANUALRUN Power Generation • Control system description The PowerCommand® control system is a microprocessor -based generator set monitoring, metering and control system designed to meet the demands of today's engine driven generator sets. The integration of all control functions into a single control system provides enhanced reliability and performance compared to conventional generator set control systems. These control systems have been designed and tested to meet the harsh environment in which gensets are typically applied. Features • 128 x 64 pixels graphic LED backlight LCD. • Digital voltage regulation. Single phase full wave SCR type regulator compatible with either shunt or PMG systems. • Digital engine speed governing (where applicable). • Generator set monitoring and protection. • Advanced overcurrent protection. • Modbus® interface for interconnecting to customer equipment. • 12 and 24 VDC battery operation. • Warranty and service. Backed by a comprehensive warranty and worldwide distributor service network. • Certification. Suitable for use on generator sets that are designed, manufactured, tested and certified to relevant UL, NFPA, ISO, IEC Mil Std., CE and CSA standards. 02008 I Cummins Power Generation Inc. I All rights reserved I Specifications subject to change without notice I Cummins Power Generation and Cummins are registered trademarks of Cummins Inc. PowerCommand, InPower and Our energy working for you." are trademarks of Cummins Power Generation. Other company, product, or service names may be trademarks or service marks of others. S -1566b (4/08) Page 1 of 8 PowerCommand digital generator set control • PCC 1302 i Description The PowerCommand generator set control is suitable for use on a wide range of generator sets in non - paralleling applications. The PowerCommand control is compatible with shunt or PMG excitation style. It is suitable for use with reconnectable or non - reconnectable generators, and it can be configured for any frequency, voltage and power connection from 120 -600 VAC line -to -line. Power for this control system is derived from the generator set starting batteries. The control functions over a voltage range from 8 VDC to 30 VDC. Features • 12 and 24 VDC battery operation. • Digital voltage regulation - Single phase full wave SCR type regulator compatible with either shunt or PMG systems. Sensing is single phase. • Digital engine speed governing (where applicable) - Provides isochronous frequency regulation. • Full authority engine communications (where applicable) - Provides communication and control with the Engine Control Module (ECM). • Common harnessing - with higher feature Cummins Power Generation controls allows for easy field upgrades. • Generator set monitoring - Monitors status of all critical engine and alternator functions. • Digital genset metering (AC and DC). • Genset battery monitoring system - to sense and warn against a weak battery condition. • Engine starting - Includes relay drivers for starter, fuel shut off (FSO), glow plug /spark ignition power and switch B+ applications. • Generator set protection - Protects engine and alternator. • Advanced serviceability - using InPowerTM, a PC -based software service tool. • Environmental protection - The control system is designed for reliable operation in harsh environments. The main control board is a fully encapsulated module that is protected from the elements. • Modbus interface - for interconnecting to customer equipment. • Configurable inputs and outputs - Four discrete inputs and two dry contact relay outputs. • Warranty and service - Backed by a comprehensive warranty and worldwide distributor service network. • Certifications - Suitable for use on generator sets that are designed, manufactured, tested and certified to relevant UL, NFPA, ISO, IEC, Mil Std., CE and CSA standards. Base control functions HMI capability Operator adjustments - The HMI includes provisions for many set up and adjustment functions. Generator set hardware data - Access to the control and software part number, generator set rating in KVA and generator set model number is provided from the HMI or InPower. Data logs - Includes engine run time, controller on time, number of start attempts. Fault history - Provides a record of the most recent fault conditions with control hours time stamp. Up to 10 events are stored in the control non - volatile memory. Alternator data - Voltage (single or three phase line -to -line and line -to- neutral) - Current (single or three phase) - KVA (three phase and total) - Frequency Engine data - Starting battery voltage - Engine speed - Engine temperature - Engine oil pressure - Partial Full Authority Engine (FAE) data (where applicable) Service adjustments - The HMI includes provisions for adjustment and calibration of generator set control functions. Adjustments are protected by a password. Functions include: - Engine speed governor adjustments - Voltage regulation adjustments - Cycle cranking - Configurable fault set up - Configurable output set up - Meter calibration - Units of measurement Our energy working for you.TM www.cumminspower.com ©2008 I Cummins Power Generation Inc. I All rights reserved I Specifications subject to change without notice I Cummins Power Generation and Cummins are registered trademarks of Cummins Inc. PowerCommand, InPower and Our energy working for you." are trademarks of Cummins Power Generation. Other company, product, or service names may be trademarks or service marks of others. S -1566b (4/08) Page 2 of 8 Power Generation Engine control SAE -J1939 CAN interface to full authority ECMs (where applicable) - Provides data swapping between genset and engine controller for control, metering and diagnostics. 12 VDC /24 VDC battery operations - PowerCommand will operate either on 12 VDC or 24 VDC batteries. Isochronous governing (where applicable) - Capable of controlling engine speed within +/ -0.25% for any steady state load from no load to full load. Frequency drift will not exceed +/ -0.5% for a 33 °C (60 °F) change in ambient temperature over an 8 hour period. Temperature dependent governing dynamics (with electronic governing) - Modifies the engine governing control parameters as a function of engine temperature. This allows the engine to be more responsive when warm and more stable when operating at lower temperature levels. Remote start mode - Accepts a ground signal from remote devices to automatically start the generator set and immediately accelerate to rated speed and voltage. The remote start signal will also wake up the control from sleep mode. The control can incorporate a time delay start and stop. Remote and local emergency stop - The control accepts a ground signal from a local (genset mounted) or remote (facility mounted) emergency stop switch to cause the generator set to immediately shut down. The generator set is prevented from running or cranking with the switch engaged. If in sleep mode, activation of either emergency stop switch will wake up the control. Sleep mode - The control includes a configurable low current draw state to minimize starting battery current draw when the genset is not operating. The control can also be configured to go into a low current state while in auto for prime applications or applications without a battery charger. Engine starting - The control system supports automatic engine starting. Primary and backup start disconnects are achieved by one of three methods: magnetic pickup, battery charging alternator feedback or main alternator output frequency. The control also supports configurable glow plug control when applicable. Cycle cranking - Configurable for the number of starting cycles (1 to 7) and duration of crank and rest periods. Control includes starter protection algorithms to prevent the operator from specifying a starting sequence that might be damaging. Time delay start and stop (cooldown) - Configurable for time delay of 0 -300 seconds prior to starting after receiving a remote start signal and for time delay of 0 -600 seconds prior to shut down after signal to stop in normal operation modes. Default for both time delay periods is 0 seconds. Alternator control The control includes an integrated line -to -line sensing voltage regulation system that is compatible with shunt or PMG excitation systems. The voltage regulation system is full wave rectified and has an SCR output for good motor starting capability. Major system features include: Digital output voltage regulation - Capable of regulating output voltage to within +/ -1.0% for any loads between no load and full load. Voltage drift will not exceed +/ -1.5% for a 40 °C (104 °F) change in temperature in an eight hour period. On engine starting or sudden load acceptance, voltage is controlled to a maximum of 5% overshoot over nominal level. The automatic voltage regulator feature can be disabled to allow the use of an external voltage regulator. Torque- matched V /Hz overload control - The voltage roll - off set point and rate of decay (i.e. the slope of the V /Hz curve) is adjustable in the control. Protective functions On operation of a protective function the control will indicate a fault by illuminating the appropriate status LED on the HMI, as well as display the fault code and fault description on the LCD. The nature of the fault and time of occurrence are logged in the control. The service manual and InPower service tool provide service keys and procedures based on the service codes provided. Protective functions include: Battle short mode When enabled and the battle short switch is active, the control will allow some shutdown faults to be bypassed. If a bypassed shutdown fault occurs, the fault code and description will still be annunciated, but the genset will not shutdown. This will be followed by a fail to shutdown fault. Emergency stop shutdowns and others that are critical for proper operation are not bypassed. Please refer to the Control Application Guide or Manual for list of these faults. Configurable alarm and status inputs The control accepts up to four alarm or status inputs (configurable contact closed to ground or open) to indicate a configurable (customer- specified) condition. The control is programmable for warning, shutdown or status indication and for labeling the input. Our energy working for you.TM www.cumminspower.com ©2008 I Cummins Power Generation Inc. I All rights reserved I Specifications subject to change without notice I Cummins Power Generation and Cummins are registered trademarks of Cummins Inc. PowerCommand, InPower and "Our energy working for you." are trademarks of Cummins Power Generation. Other company, product, or service names may be trademarks or service marks of others. S -1566b (4/08) Page 3 of 6 Power Generation Emergency stop Annunciated whenever either emergency stop signal is received from external switch. Hydro mechanical fuel system engine protection Overspeed shutdown - Default setting is 115% of nominal. Low lube oil pressure warning /shutdown - Level is preset (configurable with InPower) to match the capabilities of the engine used. Control includes time delays to prevent nuisance shutdown signals. High lube oil temperature warning /shutdown - Level is preset (configurable with InPower) to match the capabilities of the engine used. Control includes time delays to prevent nuisance shutdown signals. High engine temperature warning /shutdown - Level is preset (configurable with InPower) to match the capabilities of the engine used. Control includes time delays to prevent nuisance shutdown signals. Low coolant temperature warning — Indicates that engine temperature may not be high enough for a 10 second start or proper load acceptance. Sensor failure indication - Logic is provided on the base control to detect analog sensor or interconnecting wiring failures. Full authority electronic engine protection Engine fault detection is handled inside the engine ECM. Fault information is communicated via the SAE -J1939 data link for annunciation in the HMI. General engine protection Low and high battery voltage warning - Indicates status of battery charging system (failure) by continuously monitoring battery voltage. Weak battery warning - The control system will test the battery each time the generator set is signaled to start and indicate a warning if the battery indicates impending failure. Fail to start (overcrank) shutdown - The control system will indicate a fault if the generator set fails to start by the completion of the engine crack sequence. Fail to crank shutdown - Control has signaled starter to crank engine but engine does not rotate. Cranking lockout - The control will not allow the starter to attempt to engage or to crank the engine when the engine is rotating. Alternator protection High AC voltage shutdown (59) - Output voltage on any phase exceeds preset values. Time to trip is inversely proportional to amount above threshold. Values Our energy working for you.TM www.cumminspower.com ©2008 I Cummins Power Generation Inc. I All rights reserved I Specifications subject to change without notice I Cummins Power Generation and Cummins are registered trademarks of Cummins Inc. PowerCommand, InPower and Our energy working for you." are trademarks of Cummins Power Generation. Other company, product, or service names may be trademarks or service marks of others. S -1566b (4/08) Page 4 of 6 adjustable from 105 -130% of nominal voltage, with time delay adjustable from 0.1 -10 seconds. Default value is 110% for 10 seconds. Low AC voltage shutdown (271- Voltage on any phase has dropped below a preset value. Adjustable over a range of 50 -95% of reference voltage, time delay 2 -20 seconds. Default value is 85% for 10 seconds. Overcurrent warning /shutdown - Implementation of the thermal damage curve with instantaneous trip level calculated based on current transformer ratio and application power rating. 10 0.03 OVERCURRENT CTION CURVE 10 Amps (x rated) Under frequency shutdown (81 u) - Generator set output frequency cannot be maintained. Settings are adjustable from 2 -10 Hz below nominal governor set point, for a 5 -20 second time delay. Default: 6 Hz, 10 seconds. Over frequency shutdown /warning (81o) - Generator set is operating at a potentially damaging frequency level. Settings are adjustable from 2 -10 Hz above nominal governor set point for a 1 -20 second time delay. Default: 6 Hz, 10 seconds, enabled. Loss of sensing voltage shutdown - Shutdown of generator set will occur on loss of voltage sensing inputs to the control. Field overload shutdown - Uses field voltage to shutdown generator set when a field overload condition occurs. Field control interface Input signals to the base control include: - Remote start - Local and emergency stop - Configurable inputs: Control includes (4) input signals from customer discrete devices that are configurable for warning, shutdown or status indication, as well as message displayed Power Generation Output signals from the PowerCommand control include: - Configurable relay outputs: Control includes (2) relay output contacts rated at 2 A. These outputs can be configured to activate on any control warning or shutdown fault as well as ready to load, not in auto, common alarm, common warning and common shutdown. - Ready to load (generator set running) signal: Operates when the generator set has reached 90% of rated speed and voltage and latches until generator set is switched to off or idle mode. Communications connections include: PC tool interface: This RS -485 communication port allows the control to communicate with a personal computer running InPower or PowerCommand for Windows software. Modbus RS -485 port: Allows the control to communicate with external devices such as PLCs using Modbus protocol. Note - An RS -232 or USB to RS -485 converter is required for communication between PC and control. Networking: This RS -485 communication port allows connection from the control to the other Cummins Power Generation products. Mechanical drawings 224 (9.92) 9cJ BASIC CONTROL BOARD I 1 .– -- 199(194) —. GOVERNOR POWER STAGE r--- 1 75 (295) 1 380 50) I I + PowerCommand human machine interface HMI211 Description This control system includes an intuitive operator interface panel that allows for complete genset control as well as system metering, fault annunciation, configuration and diagnostics. The interface includes five generator set status LED lamps with both internationally accepted symbols and English text to comply with customer needs. The interface also includes an LED backlit LCD display with tactile feel soft - switches for easy operation and screen navigation. It is configurable for units of measurement and has adjustable screen contrast and brightness. The run /off /auto switch function is integrated into the interface panel. All data on the control can be viewed by scrolling through screens with the navigation keys. The control displays the current active fault and a time - ordered history of the five previous faults. Features • LED indicating lamps: - remote start - not in auto - shutdown - warning - auto - run • 128 x 64 pixels graphic LED backlight LCD. • Four tactile feel membrane switches for LCD defined operation. The functions of these switches are defined dynamically on the LCD. • Two tactile feel membrane switches dedicated for off and back. • Allows for complete genset control setup. • Certifications: Suitable for use on generator sets that are designed, manufactured, tested and certified to relevant UL, NFPA, ISO, IEC, Mil Std., CE and CSA standards. Our energy working for you.TM www.cumminspower.com 02008 I Cummins Power Generation Inc. I All rights reserved I Specifications subject to change without notice I Cummins Power Generation and Cummins are registered trademarks of Cummins Inc. PowerCommand, InPower and "Our energy working for you." are trademarks of Cummins Power Generation. Other company, product, or service names may be trademarks or service marks of others. S -1588b (4/08) Page 5 of 8 Power Generation Communications connections - PC tool interface - This RS -485 communication port allows the HMI to communicate with a personal computer running InPower. - This RS -485 communication port allows the HMI to communicate with the main control board. Mechanical drawing 141 (5.56) ---► O 0 0000 00 O 0 HMI 1 111 (4.38) 33.5 (1.32) Dimensions: mm (inches) Software InPower (beyond 6.0 version) is a PC -based software service tool that is designed to directly communicate to PowerCommand generator sets and transfer switches, to facilitate service and monitoring of these products. Environment The control is designed for proper operation without recalibration in ambient temperatures from -40 °C (104 °F) to +70° C (158 °F), and for storage from -55 °C (131 °F) to +80 °C (176 °F). Control will operate with humidity up to 95 %, non - condensing. The HMI is designed for proper operation in ambient temperatures from -20 °C ( -4 °F) to +70 °C (158 °F), and for storage from -30 °C ( -22 °F) to +80 °C (176 °F). MINN CO MPATIBLE See your distributor for more information Cummins Power Generation Americas 1400 73" Avenue N.E. Minneapolis, MN 55432 USA Phone: 763 574 5000 Fax: 763 574 5298 The control board is fully encapsulated to provide superior resistance to dust and moisture. Display panel has a single membrane surface, which is impervious to effects of dust, moisture, oil and exhaust fumes. This panel uses a sealed membrane to provide long reliable service life in harsh environments. The control system is specifically designed and tested for resistance to RFI /EMI and to resist effects of vibration to provide a long reliable life when mounted on a generator set. The control includes transient voltage surge suppression to provide compliance to referenced standards. Certifications PowerCommand meets or exceeds the requirements of the following codes and standards: - NFPA 110 for level 1 and 2 systems. - ISO 8528 -4: 1993 compliance, controls and switchgear. CE marking: The control system is suitable for use on generator sets to be CE- marked. EN 50081 -1,2 residential /light industrial emissions or industrial emissions. EN 50082 -1,2 residential /light industrial or industrial susceptibility. ISO 7637 -2, level 2; DC supply surge voltage test. Mil Std 202C, Method 101 and ASTM B117: Salt fog test. PowerCommand control systems and generator sets are designed and manufactured in ISO 9001 certified facilities. UL 508 recognized or Listed and suitable for use on UL 2200 Listed generator sets. - CSA C282 -M1999 compliance. - CSA 22.2 No. 14 M91 industrial controls. Warranty All components and subsystems are covered by an express limited one year warranty. Other optional and extended factory warranties and local distributor maintenance agreements are available. Europe, CIS, Middle East and Africa Manston Park Columbus Ave. Manston Ramsgate Kent CT 12 5BF United Kingdom Phone 44 1843 255000 Fax 44 1843 255902 Asia Pacific 10 Toh Guan Road #07 -01 TT International Tradepark Singapore 608838 Phone 65 6417 2388 Fax 65 6417 2399 Warning: Back feed to a utility system can cause electrocution and /or property damage. Do not connect to any building's electrical system except through an approved device or after building main switch is open. Our energy working for YOU.TM www.cumminspower.com 02008 I Cummins Power Generation Inc. I All rights reserved I Specifications subject to change without notice I Cummins Power Generation and Cummins are registered trademarks of Cummins Inc. PowerCommand, InPower and "Our energy working for you." are trademarks of Cummins Power Generation. Other company, product, or service names may be trademarks or service marks of others. S -1588b (4/08) Page 8 of 8 Power Generation Power Generation Exhaust Emission Data Sheet 150DSGAC 60 Hz Diesel Generator Set EPA Emission: Tier3 Engine Information: Model: Cummins Inc. QSB7 -G3 NR3 Type: 4 Cycle, In -line, 6 Cylinder Diesel Aspiration: Turbocharged and CAC Compression Ratio: Emission Control Device: Turbocharger and CAC 17.3:1 Bore: 4.21 in. (107 mm) Stroke: 4.88 in. (124 mm) Displacement: 408 cu. in. (6.7 liters ) TEST CONDITIONS Data is representative of steady -state engine speed (± 25 RPM) at designated genset loads. Pressures, temperatures, and emission rates were stabilized. Fuel Specification: ASTM D975 No. 2 -D diesel fuel with 0.03 -0.05% sulfur content (by weight), and 40 -48 cetane number. Fuel Temperature: 99 ± 9 °F (at fuel pump inlet) Intake Air Temperature: 77 ± 9 °F Barometric Pressure: 29.6 ± 1 in. Hg Humidity: NOx measurement corrected to 75 grains H2O /Ib dry air Reference Standard: ISO 8178 The NOx, HC, CO and PM emission data tabulated here are representative of test data taken from a single engine under the test conditions shown above. Data for the other components are estimated. These data are subjected to instrumentation and engine -to- engine variability. Field emission test data are not guaranteed to these levels. Actual field test results may vary due to test site conditions, installation, fuel specification, test procedures and instrumentation. Engine operation with excessive air intake or exhaust restriction beyond published maximum limits, or with improper maintenance, may results in elevated emission levels. Cummins ower Generation Data and Specifications Subject to Change Without Notice eds -1085a 1/4 1/2 3/4 Full II PERFORMANCE DATA Standby Standby Standby 4 Standby Prl e BHP @ 1800 RPM (60 Hz) 65 119 174 229 206 Fuel Consumption (gal /Hr) 3.8 6.6 9.2 11.7 10.6 Exhaust Gas Flow (CFM) 543 843 1046 1256 1175 Exhaust Gas Temperature ( °F) 639 780 849 924 885 EXHAUST EMISSION DATA HC (Total Unburned Hydrocarbons) 0.13 0.05 0.02 0.02 0 02 NOx (Oxides of Nitrogen as NO2) 2.00 2.00 3.00 3.00 3. 0 CO (carbon Monoxide) 1.33 0.65 0.46 0.32 0. 6 M (Particular Matter) 0.12 0.07 0.06 0.05 0.0 SO2 (Sulfur Dioxide) 0.15 0.14 0.13 0.13 0.1 Smoke (Bosch) 0.49 0.49 0.75 0.80 0.7 All values are Grams per HP -Hour TEST CONDITIONS Data is representative of steady -state engine speed (± 25 RPM) at designated genset loads. Pressures, temperatures, and emission rates were stabilized. Fuel Specification: ASTM D975 No. 2 -D diesel fuel with 0.03 -0.05% sulfur content (by weight), and 40 -48 cetane number. Fuel Temperature: 99 ± 9 °F (at fuel pump inlet) Intake Air Temperature: 77 ± 9 °F Barometric Pressure: 29.6 ± 1 in. Hg Humidity: NOx measurement corrected to 75 grains H2O /Ib dry air Reference Standard: ISO 8178 The NOx, HC, CO and PM emission data tabulated here are representative of test data taken from a single engine under the test conditions shown above. Data for the other components are estimated. These data are subjected to instrumentation and engine -to- engine variability. Field emission test data are not guaranteed to these levels. Actual field test results may vary due to test site conditions, installation, fuel specification, test procedures and instrumentation. Engine operation with excessive air intake or exhaust restriction beyond published maximum limits, or with improper maintenance, may results in elevated emission levels. Cummins ower Generation Data and Specifications Subject to Change Without Notice eds -1085a Power Generation EPA Tier 3 Exhaust Emission Compliance Statement 150DSGAC 60 Hz Diesel Generator Set Compliance Information: The engine used in this generator set complies with U.S. EPA and California emission regulations under the provisions of 40 CFR 89, Nonroad (Mobile Off Highway) Tier 3 emissions limits when tested per ISO 8178 D2. Engine Manufacturer: EPA Certificate Number: Effective Date: Date Issued: EPA Nonroad Diesel Engine Family: CARB Executive Order: Cummins Inc. CEX- NRCI -08 -34 12/04/2007 12/04/2007 8CEXL0409AAB U -R- 002 -0445 Engine Information: Model: Cummins Inc. QSB7 -G3 NR3 Engine Nameplate HP: 250 Type: 4 Cycle, In -line, 6 Cylinder Diesel Aspiration: Turbocharged and CAC Compression Ratio: 17.3:1 mission Control Device: Turbocharged and CAC Bore: Stroke: Displacement: 4.21 in. (107 mm) 4.88 in. (124 mm) 408 cu. in. (6.7 liters ) U.S. Environmental Protection Agency Nonroad Tier 3 Limits COMPONENT NOx + HC (Oxides of Nitrogen as NO2 + Total Unburned Hydrocarbons) CO (Carbon Monoxide) PM (Particulate Matter) (All values are Grams per HP -Hour) 3.0 2.6 0.15 Engine operation with excessive air intake or exhaust restriction beyond published maximum limits, or with improper maintenance, may result in elevatec emission levels. Cummins Power Generation • Data and Specifications Subject to Change Without Notice epa -1119b • • Power Generation Cooling System Data DSGAC High Ambient Air Temperature Radiator Cooling System Notes: 1. Data shown are anticipated cooling performance for typical generator set. 2. Cooling data is based on 1000 ft (305 m) site test location. 3. Generator set power output may need to be reduced at high ambient conditions. Consult generator set data sheet for derate schedules. 4. Cooling performance may be reduced due to several factors including but not limited to: Incorrect installation, improper operation, fouling of the cooling system, and other site installation variables. Cummins Power Generation Specification May Change Without Notice Bulletin mcp -172c Duty (kW) g Max Cooling @ Air Flow Static Restriction, Unhoused (inches water /mm water) Housed in Free Air, No Air Discharge Restriction 0.0/0.0 0.25/6.4 0.5/12.7 0.75/19.1 F182 / F216 F173 / F2 > F232 / F233 Maximum Allowable Ambient Temperature, Degree C Standby 150 55 55 55 55 54 55 t> 55 60 Hz L Prime 135 55 55 55 55 53 54 54 Continuous N/A N/A N/A N/A N/A N/A N/A 50 Hz Standby N/A N/A N/A N/A N/A N/A N/A Prime N/A N/A N/A N/A N/A N/A N/A Continuous N/A N/A N/A N/A N/A N/A N/A Notes: 1. Data shown are anticipated cooling performance for typical generator set. 2. Cooling data is based on 1000 ft (305 m) site test location. 3. Generator set power output may need to be reduced at high ambient conditions. Consult generator set data sheet for derate schedules. 4. Cooling performance may be reduced due to several factors including but not limited to: Incorrect installation, improper operation, fouling of the cooling system, and other site installation variables. Cummins Power Generation Specification May Change Without Notice Bulletin mcp -172c Power Generation Sound Data 150DSGAC 60Hz Sound Pressure Levels @ 7 meters dB(A) Configuration Octave Band Center Frequency (Hz) Position (Note 1) 8 Position Average 1 2 3 4 5 6 7 8 Standard - Unhoused (Note 3) Infinite Exhaust 84.2 87.7 84.5 85.6 82.2 85.3 86 87.7 85.7 F182 - Enclosure Steel,Weather Protective,with ExhSys Mounted Muffler 84.2 88.6 88.3 87.2 84.1 88.9 88.8 90.5 88.0 F216- Enclosure - Aluminum,Weather Protective,w /Exh System Mounted Muffler 84.2 88.6 88.3 87.2 84.1 88.9 88.8 90.5 88.0 F173 Enclosure-Steel,Sound Att,Level 2,w /Exhaust System Mounted Muffler 73.5 75.4 74.3 74.2 72.5 75.0 75.5 75.8 74.6 F217- Enclosure Aluminum,Sound Att,Level 2,w/ExhSystem Mounted Mtifflar 75.5 77.4 76.3 76.2 74.5 77.0 77.5 77.8 76.6 F232- Enclosure Steel,Sound Mounted F232- Enclosure-Steel,Sound Mounted Muffler 82.0 88.9 89.8 89.3 89.5 89.7 89.5 _D Att,Level 3,w /Exhaust System Muffler 68.6 69.2 68.1 71.7 69.9 68.3 69.5 69.9 69.6 F233- Enclosure - Aluminum,Sound ` Att,Level3,w /ExhSystem mounted Muffler 72.2 71.0 69.2 71.2 67.8 70.0 69.8 71.1 70.5 Note: 1. Position 1 faces the engine front at 23 feet (7 m) from the surface of the generator set. The positions proceed around the generator set in a counter - clockwise direction in 45° increments. 2. Data based on full rated load with standard radiator -fan package. 3. Sound data for generator set with infinite exhaust do not include exhaust noise. 4. Sound pressure levels per ANSI S1.13 -1971 as applicable. 5. Reference sound pressure is 20 µPa. 6. Sound pressure levels are subject to instrumentation, measurement, installation and generator set variability. Sound Power Levels dB(A Configuration Octave Band Center Frequency (Hz) Octave Band Center Frequency (I- z) Sound Power 63 125 250 500 1000 2000 4000 8000 Standard - Unhoused (Note 3) ( ) Infinite Exhaust 78 92.8 106.1 104.1 107.1 106 101.1 95.9 112.5 F182 Enclosure- Steel,Weather Protective,with ExhSys Mounted Muffler 96.3 102.6 104.8 106.9 111.3 108.4 107.5 103.3 115.9 F216 Enclosure-Aluminum,Weather Protective,w /Exh System Mounted Muffler 96.3 102.6 104.8 106.9 111.3 108.4 107.5 103.3 115.9 F173 Enclosure-Steel,Sound Att,Level 2,w /Exhaust System Mounted Muffler 84.3 90.7 94.0 95.5 97.4 96.2 93.5 89.0 103.1 F217- Enclosure - Aluminum,Sound Att,Level 2,w /ExhSystem Mounted Muffls)r 86.3 92.7 96.0 97.5 99.4 98.2 95.5 91.0 105.1 F232- Enclosure-Steel,Sound Mounted Muffler 82.0 88.9 89.8 89.3 89.5 89.7 89.5 84.6 97.6 Att,Level 3,w /Exhaust System F233- Enclosure - Aluminum,Sound Att,Level 3,w/ExhSystem Muuiited ' Muffler 77.9 90.2 92.7 89.4 91.1 91.5 91.0 88.0 99.3 Note: 1. Sound pressure levels per ANSI S12.34 -1988 and SIO 3744 as applicable. 2. Data based on full rated load with standard radiator -fan package. 3. Sound data for generator set with infinite exhaust do not include exhaust noise. 4. Reference sound pressure is 1pW- 1x10 "'2 W. 5. Sound pressure levels are subject to instrumentation, measurement, installation and generator set variability. Exhaust Sound Pressure Levels @ 1 meter dB(A Open Exhaust (No Muffler) @ Rated Load Octave Band Center Frequency (Hz) Sound Pressure Level 63 125 250 500 1000 2000 4000 8000 79.8 89.5 97.5 99.3 103.6 108 108 106.5 113.5 Note: Sound pressure level per ISO 6798 Annex A as applicable. Cummins Power Generation Data and Specification Subject to Change Without Notice Bulletin msp -1057b • PROTOTYPE TEST SUPPORT (PTS) 60 HZ TEST SUMMARY GENERATOR SET MODELS Power 100 DSGAA 125 DSGAB Generation -4,150 DSGAC REPRESENTATIVE PROTOTYPE Model: 150 DSGAC Alternator: UC27H Engine: QSB7 -G3 NR3 The following summarizes prototype testing conducted on the designated representative prototype of the specified models. This testing is conducted to verify the complete generator set electrical and mechanical design integrity. Prototype testing is conducted only on generator sets not sold as new equipment. Maximum Surge Power: 172 kW Steady State Performance: The generator set was evaluated to determine the stated The generator set was tested to verify steady state maximum surge power. operating performance was within the specified maximum limits. Voltage Regulation: ±0.5% Random Voltage Variation: ±0.5% Frequency Regulation: lsochronous Random Frequency Variation: ±0.25% Transient Performance: Torsional Analysis and Testing: The generator set was tested with the alternator listed to The generator set was tested to verify that the design is verify single step loading capability as required by NFPA not subjected to harmful torsional stresses. A spectrum 110. Voltage and frequency response on load addition or analysis of the transducer output was conducted over the rejection were evaluated. The following results were speed range of 1350 to 1950 RPM. recorded: Cooling System: 50 °C Ambient Full Load Acceptance: 0.50 in. H2O restriction Voltage Dip: 18.0 % The cooling system was tested to determine ambient Recovery Time: 2.3 Second temperature and static restriction capabilities. The test Frequency Dip: 8.2 ok was performed at full rated load in elevated ambient Recovery Time: 2.4 Second temperature under stated static restriction conditions. Full Load Rejection: Voltage Rise: 16.3 Durability: Recovery Time: 2.3 Second Frequency Rise: 4.1 The generator set was subjected to a minimum 250 hour endurance test operating at variable load up to the standby rating based upon MIL - STD -705 to verify Recovery Time: 1.9 Second Harmonic Analysis: structural soundness and durability of the design. (per MIL - STD -705B, Method 601.4) Line to Line Line to Neutral Electrical and Mechanical Strength: Harmonic No Load Full Load No Load Full Load The generator set was tested to several single phase and three phase faults to verify that the generator can safely 3 0.0 0.2 0.0 0.2 withstand the forces associated with short circuit 5 1.0 0.8 1.0 0.8 conditions. The generator set was capable of producing 7 0.6 1.9 0.6 1.8 full rated output at the conclusion of the testing. 9 0.1 0.0 0.1 0.0 11 0.3 0.6 0.3 0.6 13 0.2 0.5 0.2 0.5 15 0.0 0.0 0.0 0.0 Specification May Change Without Notice pts -285a Power Generation 110 ALTERNATOR DATA SHEET Frame Size UCD3J CHARACTERISTICS WEIGHTS Wound Stator Assembly 441 kg kg 972 lb Rotor Assembly 265 kg kg 584 lb Complete Alternator 706 kg kg 1556 lb MAXIMUM SPEED 2250 rpm EXCITATION CURRENT Full Load 2.20 Amps No Load 0.50 Amps INSULATION SYSTEM Class H Throughout lb lb lb 1 0 RATINGS (1.0 Power Factor) Hz (winding no.) 50 Hz (winding no) r> 60 (Based on specified temperature rise at Double Delta 4 Lead (06) Iouble Delta 4 Lead (05) 40 °C ambient temperature) (311) (311) 120/240 120/240 1 I - 120/220 -240 110- 120/220 -240 125 °C Rise Ratings kW /kVA 161/201 175/219 40/175 N/A 105 °C Rise Ratings kW /kVA 150/188 157/196 26/158 N/A 3 RATINGS Upper Broad Range LBR* 347/600 Broad Range 0 (0.8 Power Factor) ( 311) (14) (07) (311) (Based on specified temperature rise at 120/208 127/220 139/240 190 -208 110/190 115/200 120/208 127/220 40 °C ambient temperature) 240/416 255/• • • L, 277/480 380 - 416 347/600 220/380 230/400 240/415 254/440 150 °C Rise Ratings kW 230 240 255 255 230 200 200 200 172 kVA 288 300 319 319 288 250 250 250 215 125 °C Rise Ratings kW 215 225 240 240 215 184 184 184 164 kVA 269 281 300 300 269 230 -30 230 205 105 °C Rise Ratings kW 200 211 220 220 200 168 1:8 168 148 i> kVA 250 264 275 275 250 210 211 210 185 80 °C Rise Ratings kW 170 180 190 190 170 154 154 154 128 kVA 213 225 238 238 213 193 193 193 160 3 Qi REACTANCES (per unit ± 10 %) 416 440 400 310 60.0 310 40.0 415 _440 (Based on full load at 105 °C Rise Rating) Synchronous 0.62 0.58 0.51 2.00 2.00 1.77 1.60 1.48 1.16 Transient 0.04 0.04 0.03 0.13 0.13 0.09 0.08 0.08 0.06 Subtransient 0.02 0.02 0.02 0.07 0.07 0.06 0.06 0.05 0.04 Negative Sequence 0.05 0.04 0.04 0.14 0.14 0.02 0.02 0.01 0.01 Zero Sequence 0.01 0.01 0.01 0.04 0.04 0.05 0.04 1.04 0.03 3 0 MOTOR STARTING Broad Range LBR* 600 Broad Ra lqe Maximum kVA (Shunt) 770 770 770 535 (90% Sustained Voltage) (PMG) 920 920 920 678 TIME CONSTANTS (Sec) Transient 0.045 0.045 0.045 0.045 Subtransient 0.015 0.015 0.015 0.015 Open Circuit 1.270 1.270 1.270 1.270 DC 0.030 0.030 0.030 0.030 WINDINGS ( @20 °C) Stator Resistance (Line to Line, Ohms) 0.0128 0.0128 0.0128 0.0128 Rotor Resistance (Ohms) 2.0000 2.0000 2.0000 2.0000 Number of Leads 12 12 6 12 * Lower broad range 110/190 thru 120/208, 220/380 thru 240/416. Cummins Power Generation Specification May Change Without Notice ads -212d Power Generation ALTERNATOR DATA SHEET Frame Size: UCD3J Winding 311 THREE PHASE EFFICIENCY CURVES 440 V 96 95 94 90 92 91 90 89 0.20 030 040 050 060 0 70 0.60 090 P.F. to 0.9 0.8 1.00 1 10 281 KVA 480 V O% 96 95 94 93 92 91 90 89 0.20 0.30 Cummins Power Generation 0.40 0.50 0.60 0.70 0.80 0.90 Specification may Change Without Notice 1.00 P.F. 1.0 0.9 0.8 1.10 300 KVA 60 Hz ads -212d 60 I Hz Power Generation ALTERNATOR DATA SHEET • Frame Size: UCD3J Three -phase Short Circuit Decrement Curve. No -load Excitation at Rated Speed Based on star (wye) connection. 10000 E 1 1000 100 11•11■111111 MMILIILSSIM 1=1[110.11111 MI WWII 11611151•IMMI Ma Ma IMMI MO NM IIMMINNIMMI■1■1111111111•1111111••11 11=11111161M1111t111111 =Mom = =mu iii M1rt••1f1 Mai MOM NMI •11191111111■111•111•Mii i — —""�'�•�i ■iiiii� 1111m111111 1111 t■liiILWAIIIIIII UII0hI1III 1110k IIIIHI 1111111•11IN IMMEIe►txI■� �_1111111O MI•111i•esi t�r��611 11•_•.6I1 - 111M1 MENEMMM h u llEi'i■iii EMEI SIMI11fiii0 111111r■111111 ■111111 ∎:111111 V� 0.001 0.01 01 n.. 1.W 10 Sustained Short Circuit = 850 Amps 10000 I 3 1000 100 _III - Factor .__._ Factor 380v X 1.00 416v X 1.00 400v X 1.05 440v ��....- -_mss milli X 1.10 460v X 1.12 440v X 1.16 480v X 1.16 .. !!ii■■■ ,_ _ T.I -1r -t -- - - - - .ruLefTwrwL ....er ► II R>rr. ■111111a•I.IIIIIM 1■_1•NOM V 0.001 0.01 0 1 10 MO b../ Sustained Short Circuit = 1,000 Amps Note 1 The following multiplication factors should be used to adjust the values from curve between time 0.001 seconds and the minimum current point in respect of nominal operating voltage : 50Hz 60Hz Voltage - Factor Voltage Factor 380v X 1.00 416v X 1.00 400v X 1.05 440v X 1.07 415v X 1.10 460v X 1.12 440v X 1.16 480v X 1.16 The sustained current value Is constant Irrespective of voltage level Note 2 The following multiplication factor should be used to convert the values calculated In accordance with NOTE 1 to those applicable to the various types of short circuit : other times are unchange Note 3 Curves are drawn for Star (Wye) connected machines. For other connection the following multipliers should be applied to current values as shown : Parallel Star = Curve current value X 2 Series Delta = Curve current value X 1.732 Cummins Power Generation Specification may Change Without Notice ads -212d 3 -phase 2 -phase L-L 1 -phase L-N Instantaneous x 1.00 x 0.87 x t30 Minimum x 1.00 x 1.80 x 3.20 Sustained x 1.00 x 1.50 x 250 Max. sustained duration 10 sec. 5 sec. 2 sec. other times are unchange Note 3 Curves are drawn for Star (Wye) connected machines. For other connection the following multipliers should be applied to current values as shown : Parallel Star = Curve current value X 2 Series Delta = Curve current value X 1.732 Cummins Power Generation Specification may Change Without Notice ads -212d • • Power Generation ALTERNATOR DATA SHEET MX Winding 311 Frame Size: UCD3J Locked Rotor Motor Starting Curve b 25 20 e X10 5 0 UV low 1I51/ 4404' ■ .............a■ ..r't1orAP MMri...■ mmummummommummummmommorAnnemiimmdmmamm mommommmommommummommmmummpnimmommimmumum mommammimmmommommenmamunarArAmminemmummos :::: is :: ::::::::r.i05MPiii:::: ::::::i:: ■......... .fir,■......■...........■.....■ 11:11 :::1Mf :':: : : ::1" "1"1 " :::1..... .....■..., '.....■... ■...........■.....f.. ■....////, I .■ ...........................uu mminmvzammommmommummummommmommommommommm .../% u.. .....u......■...af......f.....■ ■.!,/.. f.. .a.a...■....f....fa...........■ mritmommemmmummommommmummommommumummmemm 0 100 200 300 .00 500 =mama It1M 500 700 500 MX SX 30 25 20 a 1215 p�p C10 5 0 501/ 4U 415 4404 ■ f... ......■...f.ffffr..RARaf►.fff.. ■■mlrr.f.......fffffm.►anamnAm al ■.■ ■ ■f f. ■ ■ f.f.. f f. fm f. ►. f /.144 :rf.A.■ :f.f ■ ■f.ff f.fff.f..ff.I.4r. %Y111/afalfff ffff■ mmummummommimmmummutwAgwommummommommummmm mommeArArAvis orI ■■... ■ffff./ %fir %fff.fffffalaffffff■ ■f...f.fff AUAKAf.f.f.f....f.f.f■ ■f■ : :: : : ::ii%CiC :i : :: :11:'11: :1121:::: :: MMIIIIIIMIUMWOAIMMIMMIIIIIMIMMMEMMEMMMEMOMmilm ■■ ff■ fr ✓iI'Affffff.ffff.ff.ff..N.fff■ ■ ffffi/ M," i /� /Lf.fffffffffffff.fff.f ■..f■ ■ f.I lUa.f.f.f■ ■.f...■f.ff.■if...moms ■. . 5MMMff...■■ff.fff.fff■f.ff.fff■ . ri.. f.f.... ■ ■ff.f. ■.f.ff.ffi.f.fff■ . 1, fff .f. ■ ■.f...fff..f.ffffai�f..fff■ 0 100 200 NO CO uommmm 500 500 700 60 Hz i ]0 25 20 115 110 Q 5 0 416V 440/ 45)4 U4' rilIlr:.YA.!:lllala.■ ■■ aa111 .ra.aaar.alaaaa...lalr,.a:da: uaarrl..a■ iiiiiiiiiii11iiiiiiiiiiiia ;e:�s:iiuiiiiiiiiiiii r'4urlr- .1.an111.►.� .r..aa..al.a.ra..1.I. er: ' 1 :1..1..laaaa.aalau.a raaaaraarraaararaarm...x. -Ap..alaaaaaraaaaaaaaraaaa ■alauaa.laaaa.auaulr�l. r i111au.aaaaa..ul. I..aa �11..11...1..l. :aaaaa .r1111a.1raa..laa►.ardndnd nlaaal.au.•Uairua1.1.... ■..u. ui 1. iaaaSIMUInl 145111.11rr...la.aa11aairaaaa■ ..11111111.1r..1.a.miro taranrraaaaaaaaaarraaaaaaaaa ■■a.1a.aIIIIV'Pr.►v aa.aa...laaa.a..1a.11aaaalaal■ 4414.11a1r. 1444'. ri. rMaa .loalaaaaa1111a11..111.a1■ i:: n:::: 1!: i: ...11..J). l.1......a./ :.....al..a........ /1111.■ ....a. rr/r a:........ IuuuuI ......................... ....■ 19 OV AI.. laaaal. l■.alal.u.11..11l.lralla. /1a1uI ■aa.r 4' /.g......11... .....1.1............1.......1.■ ■1.r /A∎1111a1......1.1.0 1.11111..1..11111.111.1.■ UMW, ■I. 1....1...1.....1• ■...1.1.......11..1.1..... %.■ ■ 111.1. 1111....1. 1...1.11/11...1.1111111.11..111■ .`..1.■ 11111111111. 1.111.11./11.1a11...111r.r1 0 100 200 500 400 500 600 700 900 locmemom 900 1000 SX 30 25 20 a 8 X15 810 5 0 416V MOV 461 W ■ ■ ■ ■ ■ ■ ■ ■.1 ■■■ ■ ■■a■■■■■.•:wr; -.ri _arm■■■ ■f..■■ff..■.f.fff..f f e.r!Ersfr ■■ ■■■ ■ ■fff.a.f.ff.f. 2.I..RarA.. ■fff■ ::: : : : : : ::: : : : : : :iE4 p,- .Gi...■ ■f: Mimeo' ..... ff.ff.Uf; ►M'I..f..f..maim ■...........r.. i A ...MM MMMMM ■ fff■ ■ ■.f. /. / %%Gfff.■..f..f.f.■■fff. 1111....... ■..f. f..f% L'• ■f.f.f..r519 % :U•U r /aC : : : : : : : : : : :d: : : : : :::1:1=: :: ■..r /, /...f.f..fff ff.f...ff..f... ff.f■ EAMMIIMMUMMINANOMOMMIIMEMMIIMUMUMMEOM 0 100 200 300 400 ism em 500 600 100 Cummins Power Generation Specification may Change Without Notice ads -212d Enclosures and tanks � 35 -230 kW gensets • • Enclosure features 14- gauge, low carbon, hot - rolled ASTM A569 steel construction (panels) 12- gauge, low carbon, hot - rolled ASTM A569 steel construction (posts) - Stainless steel hardware - Compact footprint - Zinc phosphate pretreatment, e-coat primer and super durable powder topcoat paint minimize corrosion and color fade - Package listed to UL 2200 - Fuel and electrical stub -up area within enclosure perimeter - Two or three recessed doors per side, depending on generator set dimensions, for service access - Doors key and padlockable for added security - Weather protective seals around all doors on sound - attenuated enclosures Enclosed exhaust silencer improves safety and protects against rust - Critical sound level exhaust silencers in sound - attenuated enclosures - Rain collar and rain cap - Non - hydroscopic sound - attenuating material - Easy access lifting points for spreader bars or forklift, depending on model Compatible with most under -set fuel tanks Enclosure attaches directly to generator set skid base or fuel tank, depending on model Designed for ambient temperatures up to 50 °C (122 °F) Refer to genset model cooling system data sheets for specific capabilities Enclosures are designed for outdoor use only Options - Two levels of sound attenuation, and weather protective enclosure, steel and aluminum (most models). - Super durable powder coat painted aluminum construction minimizes corrosion and color fade, panels and posts .1" thick, ASTM 6209, 5052 H32. - Aluminum wind rated to 150 mph (per ASCE 7 -05 exposure D, category 1 importance factor) (also available on some steel enclosures). - Window for control viewing. - Kits to up fit existing gensets or to upgrade existing enclosures with additional sound attenuation. - Exterior oil and coolant drains with interior valves for ease of service. - Overhead 2 -point lifting brackets (some models). 02009 Cummins Power Generation Inc. All rights reserved. Cummins Power Generation and Cummins are registered trademarks of Cummins Inc. Our energy working for you." is a trademark of Cummins Power Generation. Specifications are subject to change without notice. S -1012y (11/09) • • Enclosure package sound pressure levels @ 7 meters dB(A) Genset model Weather protective enclosure steel: F182 aluminum: F216* Level 1 sound attenuated enclosure steel: F172 aluminum: F231* Level 2 sound attenuated enclosure F173 Level 3 sound attenuated enclosure D teeh F232 aluminum: F233* steel: aluminum: F217* Natural Gas 35 GGFD 80 73 65 N/A 42/47 GGFE 83 73 66 N/A 60 GGHE 86 77 68 N/A 70/75 GGHF 87 77 69 N/A 85 GGHG 80 76 70 N/A 100 GGHH 80 76 71 N/A 125 GGLA 83 81 72 N/A 150 GGLB 84 81 73 N/A Diesel N/A 35 DGBB 82 71 63 N/A 35 DGGD 81 72 66 N/A 35 DSFAA 87 78 70 N/A 40 DGBC 82 72 63 N/A 40 DGHD 79 71 64 N/A 40 DSFAB 87 79 70 N/A 50 DGCA 83 72 66 N/A 50 DGHE 79 70 65 N/A 50 DSFAC 87 79 70 N/A 60 DGCB 84 73 67 N/A 60 DSFAD 87 79 71 N/A 80 DGCG 84 76 67 N/A 80 DSFAE 87 82 72 N/A 100 DGDB 86 77 70 N/A 100 DSGAA 87 N/A 73 68 125 DGDK 86 80 71 N/A 125 DSGAB 87 N/A 74 69 150 DGFA 89 77 72 N/A >150 DSFAC 88 N/A 75 70 D 175 DGFB 90 78 72 N/A 175 DSHAB 95 88 78 N/A 200 DGFC 91 80 74 N/A 200 DSHAC 95 88 78 N/A 230 DGFS* 91 81 75 N/A 230 DSHAD 96 89 78 N/A Where two natural gas ratings are shown above, the first is the natural gas rating and the second is the propane rating. Data is a measured average of 8 positions, and is 60Hz, full load standby rating, steel enclosures only. Sound levels on aluminum enclosures are approximately 2 dB(A) higher than steel as measured above. Aluminum not available on model, 230 DGFS. Our energy working for you.TM www.cumminspower.com 02009 Cummins Power Generation Inc. All rights reserved. Cummins Power Generation and Cummins are registered trademarks of Cummins Inc. "Our energy working for you." is a trademark of Cummins Power Generation. Specifications are subject to change without notice. S -1012y (11/09) Power Generation C B A OPTIONAL DUCT ADAPTER AVAILABLE )NOT SHOWN) 832 1331 L 6 RADIATOR TILL 132 128.841 100 127.571 OIL ;ILL 3 AIR CLEANER (D036 -21 2 --GENERATOR EIICIRICAL LOAD CONNECTIONS M10 THREADED STUDS 4LCR ANK 500 ;21 651 FUEL EATER 221 - - 126 18.71 14.981 700 127.571 UFl SPURN BARB FITTING FOR 3 8' HOSE SEE NOTE 3 HAUST CONNECTOR INCH NPT (A299-2] UEL D - 51U) UP 509 (20.031 1016 T401 IIIIIIIIIIIII1fligA FUEL SURPLT 8AA8 FIIIING FOR 3/8' HOSE SEE NOTE 3.2 175 16.89 ■551 OIL FILL 500 119.71 OIL CHECK 149 F RD330Ii 033501 PRODUCTION N[LEASE SEE SHEET 3 SEE SHEET 4 sel TA TA rA BH 08.02-01 IA TA rA It LO 00 -30 -01 03•30-0I D NOTES: DIMENSIONS SHOWN IN [ I ARE INCHES. 2. 025.4 11.01 HOLES MARKED BY ARE FOR SUBBASE FUEL TANK ATTACHMENT OR SECURING TO MOUNTING SURFACE, OR SUPPLEMENTAL VIBRATION ISOLATORS 3. GENSEI SUPPLIED W118 FLEXIBLE FUEL LINES THAT CAN 172 BE CONNECTED 10 ENGINE INTERFACE POINTS. (71 83.3 131 -ELEC RICA) STUB UP SEE NOTE 4 6 4.1 3 I FUEL RETURN LINE' 1061 1421 LONG WITH 1/4 -18 NPTF DRYSEAL MALE. 3.2 FUEL SUPPLY LINE: 815 132] LONG WITH I/4 -18 NP1F DAYSEAL MALE. 4 REFER 10 CIRCUIT BREAKER OUTLINE DRAWING FOR ELECTRICAL STUB-UP AREA FOR SPECIFIC BREAKERS. 4 I REFER TO SUBBASE FUEL TANK OUTLINE DRAWING FOR ELECTRICAL STUB -UP AREA AVAILABLE WITH FUEL TANKS. C 5. TABULATED WEIGHT AND CG IS FOR GENSET W1111 NO OPTIONS. �- CIRCUIT BREAKER (OPTIONAL) / )SEE BREAMER OUTLINE #' OR CONNECTIONS] [58 991 738.78 129.1] 529,13 [20.8] CRANK 63 [26.12] DI .13 43.46 534 121.031 568 [22.36] 1040 [40.961 - LIFTING SLOTS 29 197 17.761 554 OOLANT DRAIN 121.81] 1100 143.311 • DIN A 1317 REAR FACE OF BLOCK [51.841 II DRAIN 1935 176.18] 2656 1104.571 721 128.391 FUEL FILTER 4 TABULATION ALT DATA SHEET N 206 207 208 DIM 'A' DIM '8' 1266 149.64] 1292 150.861 1317 [51.85] 630 (24.801 GEN SET WET WEIGHT kg lb 1134 124991 631 124.841 1180 126021 632 124.881 209 210 1342 (52.831 1225 (27001 633 124.921 1263 127841 1368 [53.85] 634 124.961 1315 (28981 211 1393 154.841 212/213 635 125.001 1361 (30001 1419 155.86) 637 125.071 1456 (3209) B F179 HOUSING READY SKID BASE A II TI -I-" NOB PPPPP CO 01 Hi OM T 3 • irihv"F m Nm RUTA Flelf - T ABEL 01 41 I OB BLY A 1 ®� )01IAG - 2- -uR .1au : er s .3 1 V A 2 R T m3 cwL GuEnNn S EI OUTLINE .rj xk I /B a „ z ,.0ggIESIUBIN PGF p 0500.4690 . •■ n nn, 13 08 -02 -01 I CIr6 P01181 DEFHFATtltla 'Pro /ENGINEER • 3997.76 [157 41 • • J RADIATOR FILL DOOR LATCHES ARE KEY LOCKABLE AND PADLDCITARLE 081603 ACCESS DOOR 882 DOOR SWING (4 D00RSI DI 8 DIM_P - -- 1049.21 876 [41.31 [34.51 2345.31 192.31 6 4 876.(5 [ 34.51 28 1958.12 177.11 223.76 18.81 /1033010 0 I 1 61101_R(L(A51 11033501 D ( 232 232 1145 4113 1233 1A0 fill 2A TA IA u 3* LD 01 02-07 08.30 -07 1681154171011 ALT DATA (NEETI DIM -A- DIM •6• 6105(1 1111 11(14X1 50UND (0(1.05311 1313(31 6g 410511 sl 3316x1 50(90 ['CLOSURE MONISM 19 IA 206 1293 150 MI 630 174 6I 1101 143131 201 1313 (51.11 208 631 124 21 2021 344161 ■432 131141 1424 171111 1333 (52 51 632 124 91 2012 145111 209 1353 (59.31 210 211 1116 (54 27 631 124.91 1111 111511 1520 133151 1567 134591 634 125 01 2161 (41121 1397 (55.01 635 (25.01 212/215 1425 (54 II 2208 (46141 l ilf 135131 1665 134151 631 125 II 2303 (50631 1959 138641 ------4F ?3? SOUND HOUSING (STEEL ) W /MUFFLER F233 SOUND HOUSING (ALUMINUM) W /MUFFLER T 3 illav"a :n n mi& 4o wm Sae > » 3.41 1 Wan Cr) A6101,a fl7c443 • 1,8 1 1 LABEL I ABEL "" B_NENNIN6 •" 08.02 -01 Cons P0164 Demur= 2 fnI cmI Por GENSET OUTLINE 183711 $1 0500_4690 13 -.I a I Pro /E NG (NEE • • • HEATERS ARINET HEATER 5V. 50 WATTS 0 16 ET] 5 PLUG A362 6362: I 0219 CONNECTION: CORD WITH NEMA OOLANT HEATER H036: 120V, 1500 WAITS CONNECTION, 1220 T48'I CORD WITH NEMA 5-15/ f:IP1 CORD END. H074. 2084, 1125 WATTS. 240V. 1500 WATTS CONNECTION: 1220 148'1 CORD WITH NEMA 6-15/ 121P1 CORD END. ALT ER NA TO EAIER 6292: 110-1 100 WATTS CONNECTION: 21 17 FT) CORD WITH NENA 5 PLUG NOIRE 01 EATER TIARSIDEI H487. 120V, 0 WAITS CONNECTION. 18 172'1 CORD WITH NEMA 5 15P HIP) RD END. u 1309 1521 DUCT ADAPTER (F01318 680 1271 40, I -- 339 —� 11.6] 1131 802 (321 -A-] REAR FALL OF BLOCK 74 L3] _C. Q_OF ENGINE M1, /002818 /8011556 0 PR00 08_OTTEASI 450 F01) 00 AM, A255 06 30 DC OG at TA ID ID • DG ED IO 03 1601 12-01 -07 I2.01.01 I_ A- REAR FACE OF BLOCK EXHAUST CONNECTOR (A298, A2991© -{ III [71 ff1, 8 • Ii OF CRANK S TOP ENTRY BOXES REAR FACE 01 BLOCK 304 [12] 1:J 2 OF ENGINE I-- 510 f2D.11 1 308.79 112.21 f 748 129] 4 T A ROAR !ACE OF BLOCN NO I I f 1 1 iiilm u -P Re 1 NOTE: I. DIMENSIONS SHOWN IN E I ARE IN INCHES. -• - D_BC�A m 7.60AA1! A •"' D_LLE81T .� • ^00GI/11/06 slit mot CIIO6 .P01311.0 FtA31AT01 2 GFNSET - OUILINE 0PIIOSS 0500.4662 0 P(D/ENG INEE�I • • 4 y 3 2 REAR FACE OF BLOCK OPTIONAL MOUNTING 16. [00.24 4] • —L STANDARD MOUNT INGG AI J 161.3 (18.281 464 (IN OPTIO REAR 3 FACE OF 281 BLOCK OUSTING _5 F 1 t 158.4 18.211 STANDARD MOUNTING 461.3 (18.281 c �roK� ■`c�1�3_ G 464.3 118.28] 158.4 16.241 10/111211 I :0078 ROBS 1 15 2 SEE SOEE? 5 -;;;g v0 VD RJR 21111101 21JAR01 MOVED R02E5 2 5 3 TO S1EET I I RT-ROIWERD FOGS 10 MATCH - RIP VO RY 2142501 NOTES: I. DIMENSIONS SHOWN IN E 1 ARE IN INCHES. • 'NS' SHUNT TRIP HAS NO INTERNAL CONTACTS. IT MUST BE USED IN CONJUNCTION WITH AUXILIARY CONTACTS TO ACCEPT CONTINUOUS APPLIED VOLTAGE. IT CAN OPERATE AT 150 OF NOMINAL VOLTAGE. • THE SHUNT TRIP CAN OPERATE AT 10I TO 1000 OF NORMAL VOLTAGE AND WILL ACCEPT MOMENTARY OR CONTINUOUS APPLIED VOLTAGE. 800 AMP BREAKER. A LUG ACCEPTING 121 3/0 -600 k<mil CONDUCTORS IS AVAILABLE THRU ACCESSORIES. PGA PART NUMBER 03324278. 1200 AMP BREAKER - A LUG ACCEPTING 131 3/0 600 kIm11 CONDUCTORS IS AVAILABLE THOU ACCESSORIES. PGA PART NUMBER 0332-4279. 0 A 161.1 [15.711 NEUTRAL BUSS INSULATOR STANDOFF 13/8 -16 SCREW) 658 o 1 I F I se-ma _ _ _ �. :_tea- a,/; 0 IAPPROX. CIRCUIT BREAKER It ) ( (MINIMUM GUTTER SPACE( = = erl GROUND BOND AWG I /0.500 KCMIL CU 113 12 148. 11 ( <630A) 1161.7 [45.711 658 NEUTRAL BUSS AWG 250 -500 KCMIL CU (1 PLAC SI �I GROUND BON AWG 1/0-500 KCMIL CU D (APPROX. CIRCUIT BREAKER t1 C (MINIMUM GUTTER SPACE) 443 1171 12 7 [48.71 (>700A) PLEASE NOTE: THESE DRAWINGS ARE FOR LOCATION REFERENCE ONLY. CUSTOM BREAKER DETAIL PROVIDED IN °ACCESSORIES° SECTION. A 1 I I 1 I 1 111I,n.1r.•• 022..22002 MT 00 II AP ICA II AVIA 11 n .rl PAU. 3/ 161 CO O71 ICOLIANCA 4 7_ABEL i_ABEL i0 �r "°06111 L T1 •• 08 -21-06 (J 311( 061 PGF CU1105 POIER 0BWMTIUI° CIRCUIT_BRKR_OUTLINE —1-1 0500.4668 17"I g • I 4 T 3 • 2 IP20 /ENGINEER • 7-U USED TON TOP LNIRY ONLY ( <630A) 00 TYPICAL CONDUIT AND WIRE SIZE BASED OA NEC TABLE 310.16 AT ADC BREAKER TRIP SETTING WIRE (COPPER) CONDUIT STY SIZE OTT SIZE 600 A 2 350 KCMIL 2 2.5' 400 A 2 3/0 2 2.0' 250 A I 250 KCMIL I 2.5' 100 A I 2 I 1.25' 0 O 7 ��---- IIIISE FOR TOP / ENTNY ONLY TYPICAL CONDUIT AND WIRE SIZE BASED ON NEC TABLE 310.16 AT 40C BREAKER _ WIRE (COPPER) CONDUIT TRIP SETTING OTT SIZE OTT SIZE 200 A 350 KC NIL 1000A 3 400 KCMIL 3.0 800A 300 KCMIL 2.5' in;17UI PN 12:1., A I I . 1 J I I I *" 4, I .4. ^I ,a a -^a- ial4m n iihn = - -__ T -ABEL Cure Pow 03CRATOA m m T -A00L .. .H,_,'� � � ERUI ONT RCUIT_BRKR_OUTLI NE :1. .S. . •R B6 -21 -06 SITE �E • ..S ra • s �I SCALE a • 3/I6 ,,,,,,ate. ,,,',,'T',I,a:7,1K.,P PGF pl 0500.4668 • 4 T 3 • I Pr 0/ENGINEER] • B 5 1' 3 2 0206 (20A) OU1 IN 65 10 126 ON SHEET 3 10 TO 6' ON SHIFT 3 F -- I H. G I I ALT GIB 12V TO 57 -N SHEET 1 FS (SA) IN f u OUi b TO 415-1 ON SHEET 2 SPIO NF ^IIA OUT TO COS-B ON SHEET 2 110 110A1 _ IN �V OUi _ O TO SP9 ON SHEET 2 BI BAIT SW 660 POOH (20A1 SPB TO SP21 ON IN • , OUT SHEET 3 TO SPIT (SHEET 21 OPTIONAL I- LF GND L Pcc I.x (03271617 011 OP22 K5 6 K4 SPII OPTIONAL pi (COOLANT LEVEL) E.. R, 8SN B OPTIONAL R. — +TO TB. ON SHEET 3 J P20 9 J20 -9 P20 10 J20-10 P20 20 J20-20 P20 21 J20 -21 P20 13 J20.13 POT 15 J20-15 P20 -3 320 -3 P20 2 120-2 P20 4 J20 -4 P20 7 J20.7 P20 12 120 -12 P20 I 120 -I P20 18 J20 -18 (CONFIG INPUT Al P20 19 J20 19 P20 17 J20 11 ICONT IG INPUT 3) FROM BI BATT ON SHEET I 161 12 (CONFIG INPUT II :12 1 PI2 1 112-4 P12-I J12 -2 PI2 2 112.5 PI2 -5 112 -3 PI2 3 JI2-6 P12-6 122.1 P22 I J22-2 P22.2 422-3 P22 -3 122 4 P22 / J18-I PI8 C11 XI .Inn onv CONTACT LIMB. 'AN nn TA LO 5.0805 ALT U Y W (LI) IL21 (L3 N 82/X3 CT2 2/83 SENSE U SENSE V SENSE W SENSE N CT3 XI X2/83J FIOA I10AI A JI8-7 P18-2 117-2 PI7 I P17-2 FI00 (IOA) Qj _,•—\_r_H SHUNT 2 L 80. 102) LIS, NOTE: MAXIMUM AYR SHUNT LEAD CONNECTION IS 240 VAC. WHEN ALTERNATOR OUTPUT IS GREATER THAN 240 VAC. SHUNT LEAD CONNECTIONS SHALL BE MADE AT THE HALF VOLTAGE LOCATION ON THE ALTERNATOR OUTPUT TERMINAL BLOCK. I I 10 n.na (4 40711101 I nRha I CO Mi. OM. MINT ci 47 LABEL .7 1 ABEL L -DERBI ON Tog x.0 I/I 4..07-30-01 eJ tom cox PGF Curs R �EERAIUIIa WD- GENSET 1217E50_3625 (7.IO • 5 T • 3 2 [Pro /ENGINEER • B f B A 6 4 y 3 2 CRANKSHAFT SPEED SENSOR CAMSHAFT POSITION SENSOR III NC RAIL FUEL PRESSURE SENSOR WATER IN FUR SENSOR 60 PIN CONN CRAXxSNAFi POSITION SIGNAL 27 CRANM1SHAFT POSITION RETURN AANK5HAF1 P0011101 5 VOLT SUPPLE 1111111. 6A fV PIESStlRI R TU1 I11;1113�111� L FUEL � IARI Ix FUFI SIGNAL � ®, INTAKE E /AIR D'III,.1� ��i nl SENSOR Ili IATA.E 11•1100 AIR IE 510001 TEMPERATURE IITU xA51n S3EEF. MP 1LI SENSOR J! AN5NA01 POSITION SIGN. ETURN NET PO TIO CANSNAU POSITION 5 NO ENGINE OIL M PRESSURE MT SENSOR BAROMETRIC Eir PRESSURE SENSOR ENGINE COOLANT TEMPERATURE moll! j 5 ENGINE OIL PRESSURE SIGNR 2 MIRE Olt 53100031 DEEP, l IN1 OIL PRES5011 AT 50111 3 5020511111 PRESSURE SIGNAL 2 DAW1411IC PRESSURE. RN. NA 11110 50100011 5 VO1 VIP, I A [WTI[ C001ANT IEMPEIA0UOE 5 1A M111 C005Alr TEMPERATURE INTUIT Me PUMP f T r °EL a (0100501 SIGNAL L�[ I� FUEL PIMP 00150101 RETURN SAE J1939 ENGINE OATALINN INJECTOR 41 INJECTOR 82 INJECTOR N3 INJECTOR !4 A 5AL 11111 ERNI SAE 11101 000105 C -1 CYLINDER NO RTUNIC. SUPPLY 1.1 MINDER l0 7 ACM. SMPR I CIL IROI CTL NOE CTLIl01A CTI1 WEA 0.S ACTUATOR SUPPLY oI 0.l ACTUTOR RUM 1•1 00.1 ACT TO, SUPPLY 1 W,1 00100101 RECUR 48 16 6 25 14 37 23 47 03 38 3 5 02 45 53 54 51 55 52 56 58 2 4 46 47 37 28 32 SP9 6513 < FROM BI GND SHEET I C FROM FIO ON SHEET I R5I 1200 P5I n P50 050 20 0 r I L 1.11 SP5 • SP 14 R3 9 0 RIN IRK SERVICE CONNECTOR CO5 AHD B --< IRON FI SHEEI I 4 FROM E5 OUT SHEET I I AT ,,,/,--DETAII A NIS ( 113 Pu 2 S I 3 G- LOCAL T CRI 2 i I [ slop, Al P11 -17 PII 20 P11.19 OPTIONAL REMOTE F-STOP VIEW A-A PI1 22 P I I 21 P25 2 P25-6 PCC I . X J11-17 J11 -20 311-19 REEI AE.II E•1104 C.IACI ClO51l. RAS PIE IA LO I I 1 I I I All I .E.1. I P,.I . ikv 11 1 .1n1SI i.ri. i.ii 1.71:177 a `nr i' i 1. 1. LABEL 0 04 LABEL O. TOL: .r I ECM. I / I °n L. DEW¥ ..n 0T -30.07 =F ;'ti?'$SGAA. AS. AC 111E ICC PGF Cumin P 01015000010 WO- GENSET 1 0630.3625 • 5 4 • 3 IPro /ENGINCER) • 5 4 3 2 FROM BI BATT ON SHEET I FROM 65-4 ON SHEET I FROM BI -END ON SHEET I FCC IA J25 -3 J25-4 J25 -5 125-10 125.11 J25 -8 125-12 P25-3 P25 -4 P25 -5 P25-10 P25 -11 P25 -8 P25 -I2 CUSTOMER CO NECIIONS SUPPLIED ON DIRRAIL ❑ -1 TB D. 113 B. I -❑ 11_, T26 ❑ - T26 _: _ I—I ❑ I 113 6- LJ _I TB 13- I_ ❑ FROM SP8 OM SHEET I) pis 5221 SP15 S' —EPl2— 52T8 'WO II OPPI 3 OPPI -2 OPPI-1 OPPI -1 OPPI -6 OPPI -7 OPPI.5 PCC I JI -3 JI-2 JI -I JI-4 JI -6 JI-T J1 -S P29 2 P29 -I P29-3 P29 6 P29-4 P28 3 P28 -I PCC I,2 J29 -2 129 -I J29 -3 J29 -6 J29 -1 128 3 J28-I HM1112 OR I HMI 111 -T PI-4 Jl-S - -7 P1 -3 JI- - PI -5 11-5 S P6 2 P6 -I J6 -2 J6 -I DISPLAY DISPLAY BARGAAPII i ROME-SW tmr¢1 CLOSED. WAS mED tta IA in to art PAUGOI NOTES IQ. 126 OUTPUTS TESTS AT 20 AMPS. 2�. MAO CURRENT=30 AMPS. 3. NOMINAL CONDUCTOR SIZE PER TERMINAL26 -I0 AWG. 1. TOM TERMINALS TO 0.6-0.8 Nm. I I I I 1 I 1 "'I".I'»'» Naanta a II •A.arA.II A »m.A ,e1 AI: 'j M I71 —mtcu!NKr 1_ABEL LABEL v mr,m1,7gEt • SERFS »^ 07 -30.07 3111 Am PGF -IM. PPOIER..�aOBEM7I 1p WD- GENSET p1 0630.3625 • 4 T 2 • P. o /ENGINEERI • 0021011E ICC QT 0(01(10 E 000 0CT A I■M PCC x21 A I RLM010 STAR CUSTOMER INPUT 11 • G50 REAP TO LOAD 0110(0 GLIMMER TUIIO 0. 55110ME1 M OPUT 01 10 E 00512x[1001PU1 11 Cal 000100(1 OUTPUT 12 NO C 0701101 151001 02 Ca CUSTOMER 100 REMOTE START INPUT CUO1aIO 11021 11 T CUSTO M1 INPUT 11 AMR. CUSTOM. INPUT 02 CUSTOMER INPUT 02 REMOTE [-STOP` CUSTOMER 000 000010 0-5100 INPUT NOT(: 0(0000 111110111 NITOE(! 11115 AND 701-11 0000 REMOTE ENO. 10 u5(0. CUSTOMER CONNECTIONS 5' PCC I I.00 1015 15005 15x1((01 _ nsles 211 01(M 1,501 ur 510-1O111r U 1 IE101E E -RIP <PIMI [IMM. IAI P(I to 11 13115 01 005 0P110u2 MCC 021 0001(00 I I L I 0 B A 1 I 1 I I 1 "" I ^•I•aT 4 04 4.141 T_AREL co T AUEL Ar Ta. M ..I scar 111 L -00011 Comm Pam OeaM ON ••n 01 30 01 716111`;.03%...1;30 00.111.0C OTT COOL PGF WD- GENSE1 p 1 0630.3625 III B • 5 4 '1` 3 2 met • IPro /ENGINEER • C 1 5 3 PHASE RECONNECTABIE. 12 LEAD CURRENT TRANSFORMER SECONDARY CONNECTION XI X3 RANGE 110.1201 ?20 -?40 VOLTS W2(16) WS( 19 L2( VI SE IES DFI TA 3 P ASE 4 WIRE ODE • I TERMINALS U.V. .N. • VS(18 -i V2(T5)�- US)T7) U2(T4)- 1[4130[ mm VOLTAGE -01 Vµµ1I6(TI l ) SENS77EIW U6)TIOi SHUNT)2 SENSEEE V UI(TII W6)TI2) SENSE U SHUNT I NDI 0111 UC GENERATORS PCC i.X[I Cu RENT TRANSFORMER SECONDARY CONNECTION P XI X3 RANGE 0- 139/190 -240 VOLTS L I (U ) <T7 0911,1 L2(V) 6�;`1 :11 LOIN) T•1j1I L3( W) PAR LLEL STAR 3 PF -S( 4 WIRE OUIPLT TERMINALS U,V, N y32211144 )) W7(T6l W51T9) V5)T8) F� SHUNT 2 U5( Ti) SHUNT I- --jam__ FIATIT 001 CODE -02 U )1l0) WW66(TT i 2l WI113) SINS) W VI(T2l SENSE V UHT) SENSE U 50X) NE IT RD I NG II 11NDIM6 II WINDING II NOTE: SENSE ]FAD N IS NO1 U D TAPE END AND TIF BACK • 050 115/100 _ 098 120/208 1 _0020 111/220 0 0 3061 109/240 0 3 2 CURRENT TRANSFORMER SECONDARY CONNECTION XI x2 RANGE ?20- 277/380 -480 VOLTS WS)T9) W2(T6l V5(T8) V2)151 SHUNT 2 U5(T7) U2(T4) SHUNT I -- SERIES STAR 3 PHASE 4 WIRE OUTPUT TERMINALS 03 SENSE N U6 (T11101 1!73) SENSE W VI(T2) SENSE V UI(TI) —SENSE U FEATURE CODE ROST VOLTAGE 220/380 5031 1166116 II 60H/ WINCING II WINNING 11 R029 8003 0021 D R002 230/400 240/416 253/440- 211/400 1 PHASE RECONNECIABLE. 12 LEAD I CURRENT TRANSFORMER I1 SECONDARY CONNECTION X1 X3 • RANGE 0-120/220.240 VOLTS yAu VIN121 LI(12) 4-iM :I T4. L01N) 1151191 L2(W) DOUBLE ELTA I PHASE 3 WIRE OUTPUT T RMINALS CENT R TAP N. WS(T9) 65(18)-- W2(T6) SHUNT I - 4i SENSE N WI(T3) -SHUNT 2BI SENSEOV W6ITI2) VI1121 U (11)) S VSE U -04 FEATURE [WE OLTAGE 5011) t0 61801 2/I OU TIMI 4 NI FULL WIPUi NIMDI t/J OUTPUT 4 0 POT 8046 110/220 8041 115/130 1104 120/240 NOTE: SENSE L AD W IS NOT USED. 0 TAPE FND AND TIE BACK. 6 4 -? 3 • PRWWT ION RELEASE -04 REMOVER SENSE N FROM DIAGRA -04 MOTE WAS SENSE LEAD N - — SEE SHEET 2 SEE SHEET 2 ADD FCC 1.1 MOTE 28 3.4 AD O L.OENIT LD L_DEIFY EA LD L.DENn LA 10 LACK, I A ID L. DEIFY TA TA LO un 521.06 2.04,51 2 10.06 7 -06 06 10 -0101 NOTES. OR) PHASE 51WE6C1 WITH C.W. NOTATION !ACING 02W END. 2 WHEN RECONNECTING GENERATOR 10405. BOLTS SHOULD BE TONGUED AT 22 3:2 !1 -P5S. 3. 1x1 CONNECTION DIAGRAM SHOO REPRESENTS THE B POSTS PROVIDED ON TNT GENERATOR OUTPUT TERMINAL BLOCK. I IVES DRAIN 8EINEEN 110416/1 POSTS REPRESENT AN ELECTRICAL [MUTTON BETWEEN POSTS ARM THE CONNECTED LEADS. TO PROVIDE LAS ITN ASSEIBLET SOME PRODUCT AT MAW BUS DABS INSTALLED ACROSS THE TERAIARL POSTS 6ICH AN! NOT SHOWN IN THIS CONNECTION DIAGRAM IMIRE BUS BARS ARE u5E0. 801 N01 SHOWN IN THE CONNECTION DIAGRAM, AN INSULATOR MUST BE USED 10 ELECTRICALLT SEPARATE THE LEADS FOR PROPER OPERATION. Igt=812'41U1NA. u -i 1e •NU 4.11 �i ss I4 4,4 ...No To :16 Ir(.<+14 I/I +• 0630.2404 co am .L1 nort TABULATION 0130.3180.01 0010 3388.02 O{ID.3388.00 U032141 M32140 8032141 WO_338B_04 •1032940 1{30_]388.05 .(032148 0130.3388. N6 1103294/ LPL • �•Ila u•mum +• L_ARNOLD �• L DEWEY Curd ..80603 0 0641DM. e NI.D)RNO WD- GENSET OS 25.08 SI 11 <m IRECONNICII ate_ ,61:4;;;1PCC 1302 POE 310630_3388 2 1� I 2 v • D C A 0630 -1974 B 5 1 D Pro /ENGINEER METRIC DWG GENSEI PACKAGE WITH PCC 2100 OPTIONAL OUTPUT RELAYS - - Tel -K PCC INTERCONNECTION BOA TB2 PSA65 A 1154115 A a• GM NC XC AL mnNOL 11]0 ON VACI ® ^gym m =m TB I (ROTE 131 REMOTE START Amon E'SEM Al WYE RESET COAT 001451) CUSTOMER [ PU IRON T S - �l- 4 6 - d 13 14 - I6 FUSED B• I1 _ II(U X IXAI IS — SWIiCX[0 I• IMO 19 MD 10 WO 6X0 lIAR IMF_ E©= Eu Ii 21 — 2 -I 2-2 - OPTIONAL COOLANT AND /OR ALTERNATOR NEATER(S) STARTER 1 -2 \ I 5 (NOTE 9) EMERGENCY I— STOP (WHEN USED) SEE NOTE 16 B� (NOTE 12) 1.1 GND 120 OR 240 VAC SOUK AC SOURCE(S) (PLUG CONNECTION) AS DESCRIBED ON SUBMITTAL DATA 2 -12 r ALARM W FDEL 1 T[OMIM, RUN 2 S[[ NOTE I1,>-"( 6 05 -0814 ANNUNCIATOR JI BI 13 2 -P • 2 -13 1 -A 2 -11 I-5 1111. e e ICE 81 INSTALLER y OT PC 8 BTPC UTILITY TO GENSEI MOUNTED IN 01PC /BTPC AC LINE FAILURE 11 LTA LOW BATTERY VOLTAGE SOURCE CONNECT SOURCE 2 CONNECTED SOURCE I AVAILABLE C NC NO NC NO NO CABINET �WW� T133 CMS mI ml1m MUD 1m NIN DATAI DATA2 ISEE NOTE 6) RELAY MODULE J14 J15 NO CO 111 111 131 113 .131 © ®NC m COM N NC I! 111 OM NO N• CON HI NC Cm' I CO M UR POE- 15101 - NO® 0 NO co 113 , NC C ® © COM AUTO IN m 0 NO COM LOAD SNiD Na col FAIL 10 No CLOSE CON NC NO COM NC SOURCE 2 AVAILABLE TEST OR EXERCISE ACTIVE FAIL TO SYNC. (OPT.) FAIL 10 DISCONN (OPT.) 2 ARY 12 (NOTE REMOTE PER TORT 14 ) SENS APED P IS AMP CVAPSER IOOTE CON01 ALARM ALTP 151 CONTACT AATIAS AN YO X01(: PROVIDE AND JIG ARE 0 ON PROVIDED WHEN NEEDED ON AND ARE ONLY ALLEO OPT EONS TON FE SEE NOTE (NOTE II WIRE SIZE LARGE DISTANC (MULTIPLY A 16 1000 90 IN FEET, BY 0.3 FO ONE WAY R MEYERS) 14 1600 12 2400 10 4000 6 150 225 350 20 30 50 80 5 50 600 80 1000 125 125 10 200 15 300 25 500 10 REAR MAI I OF CABINET (NOTE 9) (NOTE SI 1B J 0.PC BTPC NO C::/j ATULL ER SWITCH AUXILIARY SWITCH C NO�� IRAROE ER SWITCH NCA AUXILIARY SWITCH C NO BYPASS SWITCH C� NORMAL AUXILIARY SWITCH NO BYPASS SWIICN NC� AUXILIARY AUXIARi SWIICN ISLE ROTE 10) TB? GAD (SEE NOTE BI 81 (SEE NOTE 21 RAT REMOTE TEST TRANSFER INHIBIT LOAD SHED IOPTIONALI COMMON REMOTE TEST I SWIICN (WHEN USED) SEE NOTE A 00 ROT SCALE PRICE T 3 • REDRAWN. SEE MO NA CHARGES PL PL 12-30-02 T RD Ii942 ERO22m REVISED PER ECOR VAX SG PUNYKO 06.15-03 A NDL2255 RLVISED PER ICOR LJA OEM MILLER 0I 20 05 T ND2 A92/ A IDOOIAI REVISED PER FERN JEN JIM BA INS B NESS SALCHOW 09-01 -OS 0206 -OT NOTES I WIRE Si ES REST BE AS FOLLOWS. UN AI - 4FNSET TO TRANSFER SWITCH LEAD SITE MUST Bf NCREASCD IF A BATTERS CHARGER IS INSTALLED IN THE SIITCN. WITH NO BATE CHARGER-LEADS 1-I, -2. -3. -A. 5 USE COL A. WITH 2 ANP CHARGER. MARION VOLTAGE DROP 01 1 5 00110. LEADS I I. 61.3 USE COL B OITA 10115 AMP CHARGER MAXIMUM VOLTAGE DROP OF 1.5 VOLTS, LEADS 1.1 6 I -3 USE COL. C. RIIN 2 AMP CHARGER. MAXINUN VOLTAGE DROP OF 0.15 VOLTS. LEADS I I. N1-3 USE COL 0 RIM 12/15 AMP CHARGER, MAXIMUM VOLTAGE DROP OF 0 TO VOLTS, LEADS I -I, E. I -3 USE COL E 10 NEED 1HE NEPAL ID REDUIRENLNI TO RETURN A FILLY DISCHARGED BATTERY TO 1001 OE ITS AMPERE-HOUR RATING WITHIN 24 HOURS USE COL E 2. IF OPEC NETWORK CARD IS USED. YOU MUST CONNECT TI OR EXTERNAL BATTERY - BACKED POWER TO O1PC)BTPC DIGITAL BOARD AI A21.III1111 R P27.2210D1. 3. FOR NUli1PMI RAINIER SKETCHES, DUPLICATE ALIN II EON EACH SNITCH NISI CHAIN CONNECTION IS ACCEPTABLE PROVIDER NIAI SIZE A DESEAACE TO THE LAST SNITCH MEET THE SPECS EA NOTE I. 4 CONNECT AN OPEN DRY CONTACT BETWEEN THE APPLICABLE TERMINAL AND COMMON FEAR-R, FOR REMOTE TEST, TRANSFER INHIBIT AND LOAD SHED. CLOSE TO ACTIVATE 5. CONTACTS RATED. 4 AMPS AT 30 VDC OR 120v MAN. 6. REFER TO ONAN 900 -0529 POWERCOMMAND NETWORK INSTALLATION A OPERATION MANUAL FOR WIRING INSTRUCTIONS. WIRE SIZE I IENGRH. USE STRANDED TWISTED PAIR WIRES WHEN CONNECTING DATAI 6 DATA? TO NETWORK. PART N0. 033A -1350 OR EQUAL 1 CONNECTIONS TO TNI -A XRU i ON GENSET ARE fOR D CUSTOMER USE AND MAY BE CONFIGURED TO DISPLAY CUSTOM ALARM MESSAGES ON GENSET CONTROL LOW FUEL IS REQUIRED FOR NFPAIID COMPLIANCE. 8. INSTALL JUMPER BETWEEN 1132 -I 6 T82 -2 9. THIS CONNECTION IS USED IF ATS POSITION DISPLAY IS DESIRED IN REMOTE ANNUNCIATOR 6 ASS DOES NOT NAVE REMORA INTERFACE CONEIGURABIE INPUT 6 PROGRAMMED 'EPS SUPPLYING LOAD' 6 BOUND TO ANNUNCIATOR OVER NETWORK. 10. TRANSFER SWITCH SHOWN CLOSED TO NORMAL BYPASS SWITCH SHOWN IN NEUTRAL POSITION II. CONTACTS RATED. 2 AMPS AT 30 VDC OR 0.60 AMPS AT 120 VAC 12 CONFIGURATION SHOWN 15 FOR ATS- NOUNIED BATH R1 CHARGER IF WALL- MOUNTED CHARGER IS USED. CONNECT 5. 6 GND FROM CHARGER DIRECTLY TO BATTERY 13. MAXIMUM WIRE SIZE ON TB1 IS 12 AIM. WIRING MUST BE STRANDED. 14 USE THE INVENTOR REMOTE TEMPERATURE PROBE 10193.0530, 15. THE FOLLOWING FAILS WILL CAUSE A BATTERY CHARGER ALARM OUTPUT. LOW BATTERY VOLTAGE. HIGH BATTERY VOLTAGE, LOW AC INPUT VOLTAGE. HIM AC INPUT VOLTAGE OVLRCURRENT, HIGH CHARGER TEMPERATURE. BATTERY FAILURE, HIGH BATTERY TEMPERATURE FNOT AVAILABLF ON 2 AMP CHARGERI 16. NETWORK CONNECTIONS' IB GA TWISTED PAIR OR CAI 5 CABLE. IOIAL NETWORK LENGHT CANNOT EXCEED 4000 FEET UP TO 20 MODES CAN BE CONNECTED 10 THE NETNORS, MOTE: ANY COMMUNICATIONS WIRE CONNECTED 10 THE GENSET SHOULD BE STRANDED CABLE) 11. REFER 10 0900 -0301 FOR INSTALLATION OF 0300-5129. 18 0300 5929 COMMUNICATION OMIT AVAILABLE WITH PCC2100 SOFTRARF VERSION 2.100 OR HIGHER. 7;7-.2E. —j „Ix MAF.IE .616M 11/1 _'O MN Flu I • l TARO 05'21 ^ -9W OS -21 -9f — ,,,, • • ; ' ���M •' o I SMITH as N 91 SITE EON 00 INTERCONNEC110N . ..IA 11 R iiNR x'a.N 1 ,o.a rj ei°fyI OT PC /BTPC PGA 0630.1914 jTI :Dm D 2 I 1� dames 0FGBAVUIiw ■ • ANNUNCIATOR 300-5929 TBI -_ I I CUSTOMER FAULT E© CUSTOMER FAULT 2 \ 2 A Ea Q CUSTOMER FAULT 3 GENSET SUPPLYING LOAD © CHARGER AC FAILURE \ 1 12 Ea LOW COOLANT LEVEL FUEL \ 2 13 - al LOW LEVEL NORMAL I11LITY OR CHECK GENRE J2 MI Inn GND !--...._ -4 E� 0 -T12 \ f'-'-' � BATT 5 1 GND BZ —GAO 2 NOT IN U10 GENSET RUM! 1 5 T / LOFT AN PRE COOLANT T TEMP A 1 PRE HIGH ENGINE TEMP II HIGH ENGINE TEMP P II PRE-LOW LOW P IA SURE SURE 12 LOW 011 PRESSURE 13 II OVERSPECD 6 05 -0814 ANNUNCIATOR JI BI 13 2 -P • 2 -13 1 -A 2 -11 I-5 1111. e e ICE 81 INSTALLER y OT PC 8 BTPC UTILITY TO GENSEI MOUNTED IN 01PC /BTPC AC LINE FAILURE 11 LTA LOW BATTERY VOLTAGE SOURCE CONNECT SOURCE 2 CONNECTED SOURCE I AVAILABLE C NC NO NC NO NO CABINET �WW� T133 CMS mI ml1m MUD 1m NIN DATAI DATA2 ISEE NOTE 6) RELAY MODULE J14 J15 NO CO 111 111 131 113 .131 © ®NC m COM N NC I! 111 OM NO N• CON HI NC Cm' I CO M UR POE- 15101 - NO® 0 NO co 113 , NC C ® © COM AUTO IN m 0 NO COM LOAD SNiD Na col FAIL 10 No CLOSE CON NC NO COM NC SOURCE 2 AVAILABLE TEST OR EXERCISE ACTIVE FAIL TO SYNC. (OPT.) FAIL 10 DISCONN (OPT.) 2 ARY 12 (NOTE REMOTE PER TORT 14 ) SENS APED P IS AMP CVAPSER IOOTE CON01 ALARM ALTP 151 CONTACT AATIAS AN YO X01(: PROVIDE AND JIG ARE 0 ON PROVIDED WHEN NEEDED ON AND ARE ONLY ALLEO OPT EONS TON FE SEE NOTE (NOTE II WIRE SIZE LARGE DISTANC (MULTIPLY A 16 1000 90 IN FEET, BY 0.3 FO ONE WAY R MEYERS) 14 1600 12 2400 10 4000 6 150 225 350 20 30 50 80 5 50 600 80 1000 125 125 10 200 15 300 25 500 10 REAR MAI I OF CABINET (NOTE 9) (NOTE SI 1B J 0.PC BTPC NO C::/j ATULL ER SWITCH AUXILIARY SWITCH C NO�� IRAROE ER SWITCH NCA AUXILIARY SWITCH C NO BYPASS SWITCH C� NORMAL AUXILIARY SWITCH NO BYPASS SWIICN NC� AUXILIARY AUXIARi SWIICN ISLE ROTE 10) TB? GAD (SEE NOTE BI 81 (SEE NOTE 21 RAT REMOTE TEST TRANSFER INHIBIT LOAD SHED IOPTIONALI COMMON REMOTE TEST I SWIICN (WHEN USED) SEE NOTE A 00 ROT SCALE PRICE T 3 • REDRAWN. SEE MO NA CHARGES PL PL 12-30-02 T RD Ii942 ERO22m REVISED PER ECOR VAX SG PUNYKO 06.15-03 A NDL2255 RLVISED PER ICOR LJA OEM MILLER 0I 20 05 T ND2 A92/ A IDOOIAI REVISED PER FERN JEN JIM BA INS B NESS SALCHOW 09-01 -OS 0206 -OT NOTES I WIRE Si ES REST BE AS FOLLOWS. UN AI - 4FNSET TO TRANSFER SWITCH LEAD SITE MUST Bf NCREASCD IF A BATTERS CHARGER IS INSTALLED IN THE SIITCN. WITH NO BATE CHARGER-LEADS 1-I, -2. -3. -A. 5 USE COL A. WITH 2 ANP CHARGER. MARION VOLTAGE DROP 01 1 5 00110. LEADS I I. 61.3 USE COL B OITA 10115 AMP CHARGER MAXIMUM VOLTAGE DROP OF 1.5 VOLTS, LEADS 1.1 6 I -3 USE COL. C. RIIN 2 AMP CHARGER. MAXINUN VOLTAGE DROP OF 0.15 VOLTS. LEADS I I. N1-3 USE COL 0 RIM 12/15 AMP CHARGER, MAXIMUM VOLTAGE DROP OF 0 TO VOLTS, LEADS I -I, E. I -3 USE COL E 10 NEED 1HE NEPAL ID REDUIRENLNI TO RETURN A FILLY DISCHARGED BATTERY TO 1001 OE ITS AMPERE-HOUR RATING WITHIN 24 HOURS USE COL E 2. IF OPEC NETWORK CARD IS USED. YOU MUST CONNECT TI OR EXTERNAL BATTERY - BACKED POWER TO O1PC)BTPC DIGITAL BOARD AI A21.III1111 R P27.2210D1. 3. FOR NUli1PMI RAINIER SKETCHES, DUPLICATE ALIN II EON EACH SNITCH NISI CHAIN CONNECTION IS ACCEPTABLE PROVIDER NIAI SIZE A DESEAACE TO THE LAST SNITCH MEET THE SPECS EA NOTE I. 4 CONNECT AN OPEN DRY CONTACT BETWEEN THE APPLICABLE TERMINAL AND COMMON FEAR-R, FOR REMOTE TEST, TRANSFER INHIBIT AND LOAD SHED. CLOSE TO ACTIVATE 5. CONTACTS RATED. 4 AMPS AT 30 VDC OR 120v MAN. 6. REFER TO ONAN 900 -0529 POWERCOMMAND NETWORK INSTALLATION A OPERATION MANUAL FOR WIRING INSTRUCTIONS. WIRE SIZE I IENGRH. USE STRANDED TWISTED PAIR WIRES WHEN CONNECTING DATAI 6 DATA? TO NETWORK. PART N0. 033A -1350 OR EQUAL 1 CONNECTIONS TO TNI -A XRU i ON GENSET ARE fOR D CUSTOMER USE AND MAY BE CONFIGURED TO DISPLAY CUSTOM ALARM MESSAGES ON GENSET CONTROL LOW FUEL IS REQUIRED FOR NFPAIID COMPLIANCE. 8. INSTALL JUMPER BETWEEN 1132 -I 6 T82 -2 9. THIS CONNECTION IS USED IF ATS POSITION DISPLAY IS DESIRED IN REMOTE ANNUNCIATOR 6 ASS DOES NOT NAVE REMORA INTERFACE CONEIGURABIE INPUT 6 PROGRAMMED 'EPS SUPPLYING LOAD' 6 BOUND TO ANNUNCIATOR OVER NETWORK. 10. TRANSFER SWITCH SHOWN CLOSED TO NORMAL BYPASS SWITCH SHOWN IN NEUTRAL POSITION II. CONTACTS RATED. 2 AMPS AT 30 VDC OR 0.60 AMPS AT 120 VAC 12 CONFIGURATION SHOWN 15 FOR ATS- NOUNIED BATH R1 CHARGER IF WALL- MOUNTED CHARGER IS USED. CONNECT 5. 6 GND FROM CHARGER DIRECTLY TO BATTERY 13. MAXIMUM WIRE SIZE ON TB1 IS 12 AIM. WIRING MUST BE STRANDED. 14 USE THE INVENTOR REMOTE TEMPERATURE PROBE 10193.0530, 15. THE FOLLOWING FAILS WILL CAUSE A BATTERY CHARGER ALARM OUTPUT. LOW BATTERY VOLTAGE. HIGH BATTERY VOLTAGE, LOW AC INPUT VOLTAGE. HIM AC INPUT VOLTAGE OVLRCURRENT, HIGH CHARGER TEMPERATURE. BATTERY FAILURE, HIGH BATTERY TEMPERATURE FNOT AVAILABLF ON 2 AMP CHARGERI 16. NETWORK CONNECTIONS' IB GA TWISTED PAIR OR CAI 5 CABLE. IOIAL NETWORK LENGHT CANNOT EXCEED 4000 FEET UP TO 20 MODES CAN BE CONNECTED 10 THE NETNORS, MOTE: ANY COMMUNICATIONS WIRE CONNECTED 10 THE GENSET SHOULD BE STRANDED CABLE) 11. REFER 10 0900 -0301 FOR INSTALLATION OF 0300-5129. 18 0300 5929 COMMUNICATION OMIT AVAILABLE WITH PCC2100 SOFTRARF VERSION 2.100 OR HIGHER. 7;7-.2E. —j „Ix MAF.IE .616M 11/1 _'O MN Flu I • l TARO 05'21 ^ -9W OS -21 -9f — ,,,, • • ; ' ���M •' o I SMITH as N 91 SITE EON 00 INTERCONNEC110N . ..IA 11 R iiNR x'a.N 1 ,o.a rj ei°fyI OT PC /BTPC PGA 0630.1914 jTI :Dm D 2 I 1� dames 0FGBAVUIiw ■ • 43 �A N N \ \ N .- 4- 9-4' N M M 15 32� 28-} 24 18 13 7 F'° O T M a) O in E E N .- N M O O N N N, 0 0 o E E R H S L J O K J plan View o Spill Box 0 T` O 9 3/16' x 1 5/8' Mtg. HolPS (4) 1-21-71' o- - il7 7 �F3 37 29 1.10 M tO O 1�4 1/2 3 L 1 ' O1 M 03 CV N \ (NO (MO i end View 21,± 43 Overall Tank Width it-41 5/16 Mtg. Hole 1 VLF \ (6) 150 Overall Length co PROPRIETARY NOTICE THIS DRAYE° CONTAMS DESIGNS AND OTHER DfORNATW WHICH ARE THE PROPERTY OF 0 TANKS • INDUSTRIAL FABRICATION, INC. EIICFPT FOR Of REEDS 00011 D EXPRESSLY RY CONTRACT. TNti DRAWPN WY NCR BE DISCLOSED OR 010001ED N WHILE DR N PART OR USED FOR WNUFACRIRE OF DESIGNS DISCLOSED HEREIN WITHOUT THE PRIOR WRITTEN REMISSION OF 0H TANKS • DIDUSIRML FABOCTTON. INC. k-37 Tank Width' 40 Mtg. Hole ft 43 Base Width (4) )ITE. II LIT USE I0Nf9C TOE ARRAIG :NT FIB PRECAST ANCIWS. USE FIRM AS A TDPLATE AFTER TAN( IS LOCATED INTO FINAL POSIT@L If) (0 N rT\,3/16' Mtg. Holes (6) L() To • ALL DIMENSIONS NOMINAL FITTINGS LIST A 2' LEAK DETECT B 4' SECONDARY EMERGENCY VENT °200 (ea ta7 C 2' PRIM. NORMAL VENT w /ARRSTR D 4' PRIMARY EMERGENCY VENT OA 1211 2' EXTRA (4) F 4• x 2' FILL WITH UMITER G 2' MECHANICAL FUEL GAUGE H 2' 90% HIGH / 25% LOW ALARM 2' X 3/8' SUPPLY WITH DROP TUBE K 2" X 3/8" RETURN WITH DROP TUBE 2• SECONDARY EXTRA 2' x 1/2' SUPPLY w /DROP TUBE (PUMP) N 2" x 1/2' RETURN w /DROP TUBE (PUMP) P 2" X 1' FILL (w /1' SOLENOID SHPD LOOSE) R 2' 50% START / 85% STOP (SUPPLY PUMP) R 2' 95% SUPPLY PUMP STOP / RETURN PUMP START / CRITICAL HIGH ALARM R 2' 50% START / 85% STOP (SUPPLY PUMP) U 2" x 1" PRIMARY TANK DRAIN w /BALL VALVE V 4 GPM SUPPLY PUMP W 4 GPM RETURN PUMP NOTES AND COMMENTS HIGH ALARM AND LEAK DETECT SET NOFD. LOW ALARM, PUMP ON AND PUMP OFF SET NCFD. PAINTED BLACK UNLESS OTHERWISE NOTED ON THE DRAWING. AS DRAWN, ACTUAL CAPACITY: 320 GALLONS USABLE CAPACITY: 303 GALLONS DIESEL HAZMAT DECAL KIT SHIPPED LOOSE. BASED ON DWG: 500 - 4690.1,2,3 DRY WEIGHT: 2,250 lbs. 111 UL 142 OWN CA DATE. 8.20.2010 Pawe r ENGINEERED-MANUFACTURED-DELIVERED CHIC. BY CA PA. B09(1244 BIOS Pk206411041077 FIIIIN1B•186i070141054Y/425( DATE: 8.20.10 Ernst ergtheerhalb cmer.00m WWW.IBIPOWER.COM DeoHPBon:315 Gallon DWGB Tank APP. BY DATE: culenLCummins N.W. SRen) ProjN:t Nome:Metro South Base JOB NUMBER: Project Number. — SCALE: 1/2" = 1' -0' DRAWING NO. SHY. Q1006339 1 2 REV. ID • ;.r.C1L :;- 2 1111{{� ,410.7:-• ji sn Rrtm .;y^.'.S l".n.l G uNnnIi w.MEaa11467I W . 1i E af.,l r� •y....� • PROPRIETARY NOTICE ORS ORAWINO CONTAINS DESIGNS AM OTHER IFBDRWTION WNCN ARE THE PROPERTY OF OF TAPIRS • INDUSTRIAL FABRICATION. DIG EXCEPT FOR THE ROWS GRANTED EXPRIMSLY BY COCRACT. FTC CRANING WY NOT BE DISCLOSED OR DUPLEX= N WIRHE OR N PITT OR USED FOR MANUFACTURE OF OE RS DISCLOSED HEREIN WITHOUT DE PMOR WRRIEM PETOOSDON OF BI TAMS • MOUSIRIAL FABRICATION. INC. 43 • ■ M. SI 11lOMOrr OMMIOWOROOMITOIROIIMINNIIMBNOMPIO1 ■ Controller (Location & Configuration TBD) CUMMINS DIESEL ENGINE GENSET 15010W- DSGA(C) GenSet Weight' 15,000 lbs. OWN. CA mm 8.20.2010 InENGINEERED—MANUFACTURED—DELIVERED CHK. BY CA DATE: 8.20.10 APP. BY P.O. BOX 1813, SNOB Pli22341114077 N#X2064/QY170440D411►432111 En I Iblpmer.00m 1 WWW.IBIPOWER.COM DescdPtTe ^:Composite View cuent:Cummins N.W. (Ren) DATE: Project NDme:Metro South Base JOB NUMBER: Project Number — SCALE: 1:30 DRAWING NO. SLAT Q1006339 I� REV. ID OTPC • transfer switch open and closed transition Power Generation • Description OTPC transfer switches are designed for operation and switching of electrical loads between primary power and standby generator sets. They are suitable for use in emergency, legally required and optional standby applications. The switches monitor both power sources, signal generator set startup, automatically transfer power and return the load to the primary power source once the utility returns and is stabilized. OTPC transfer switches are available with closed transition transfer. By briefly connecting the two sources (for 100 msec or less), the transfer from the alternate source back to the normal source occurs without interruption in the power supply to loads. All switches are UL 1008 Listed with UL Type Rated cabinets and UL Listed CU -AL terminals. SA° NEC All switches are certified to CSA 282 Emergency Electrical Power Supply for Buildings, up to 600 VAC. Suitable for use in emergency, legally required and standby applications per NEC 700, 701 and 702. E, All switches comply with NFPA 70, 99 and 110 F� (Level 1). NFPA' MOM All switches comply with NEMA ICS 10. 8 All switches comply with IEEE 446 Recommended Practice for Emergency and Standby Power Systems. is() "91W)I This transfer switch is designed and manufactured in facilities certified to IS09001. Features PowerCommande control - A fully featured microprocessor -based control with digital display. Controls allow operator to enter settings and make adjustments to software- enabled features easily and accurately. Accommodates up to 8 event schedules. Programmed transition - Open transition timing can be adjusted to completely disconnect the load from both sources for a programmed time period, as recommended by NEMA MG -1. Advanced transfer switch mechanism - Unique bi- directional linear actuator provides smooth, continuous transfer switch action during automatic operation. Robust control system design - Optically isolated logic inputs and isolation transformers for AC power inputs provide high - voltage surge protection. Main contacts - Heavy -duty silver alloy contacts with multi -leaf arc chutes are rated for 100% load interruption. They require no routine contact maintenance and provide 100% continuous current ratings. Communications capability - The transfer switch is capable of communicating with other transfer switches, accessories with a SCADA network or with Cummins Power Generation generators utilizing LonWorks protocol. Easy service /access - Single -plug harness connection and compatible terminal markings simplify servicing. Access space is ample. Door - mounted controls are field- programmable; no tool is required. Complete product line - Cummins Power Generation offers a wide range of equipment, accessories and services to suit virtually any backup power application. Warranty and service - Products are backed by a comprehensive warranty and a worldwide network of distributors with factory- trained service technicians. 02010 Cummins Power Generation in All rights reserved. Cummins Power Generation and Cummins are registered trademarks of Cummins Inc. PowerCommand and "Our energy working for you." are trademarks of Cummins Power Generation. Other company, product, or service names may be trademarks or service marks of others. Specifications are subject to change without notice. S- 1270ab (1/10) Transfer switch mechanism Specifications • Transfer switch mechanism is electrically operated and mechanically held in the Source 1 and Source 2 positions. The transfer switch incorporates electrical and mechanical interlocks to prevent inadvertent interconnection of the sources. • Independent break - before -make action is used for both 3 -pole and 4 -pole/ switched neutral switches. This design allows use of sync check operation when required, or control of the operating speed of the transfer switch for proper transfer of motor and rectifier -based loads (programmed transition feature). • True 4 -pole switching allows for proper ground (earth) fault sensing and consistent, reliable operation for the life of the transfer switch. The neutral poles of the transfer switch have the same ratings as the phase poles and are operated by a common crossbar mechanism, eliminating the possibility of incorrect neutral operation at any point in the operating cycle, or due to failure of a neutral operator. • High pressure silver alloy contacts resist burning and pitting. Separate arcing surfaces further protect the main contacts. Contact wear is reduced by multiple leaf arc chutes that cool and quench the arcs. Barriers separate the phases to prevent interphase flashover. A transparent protective cover allows visual inspection while inhibiting inadvertent contact with energized components. • Switch mechanism, including contact assemblies, is third party certified to verify suitability for applications requiring high endurance switching capability for the life of the transfer switch. Withstand and closing ratings are validated using the same set of contacts, further demonstrating the robust nature of the design. Voltage rating 600 VAC, 50 or 60 Hz. Arc interruption Multiple leaf arc chutes provide dependable arc interruption. Neutral bar A full current -rated neutral bar with lugs is standard on enclosed 3 -pole transfer switches. Auxiliary contacts Two isolated contacts (one for each source) indicating switch position are provided for customer use. Contacts are normally open, and close to indicate connection to the source. Wired to terminal block for easy access. Rated at 10 amps continuous and 250 VAC maximum. UL recognized, and CSA- certified. Operating temperature -40 'F ( -40 'C) to 140 'F (60 'C) Storage temperature -40 'F ( -40 'C) to 140 'F (60 'C) Humidity Up to 95% relative, non - condensing Altitude Up to 10,000 ft (3,000 m) without deratinq Surge withstand ratings Voltage surge performance and testing in compliance with the requirements of IEEE C62.41 (Category B3) and IEEE C62.45. Total transfer time (source- to- source) Will not exceed 6 cycles at 60 Hz with normal voltage applied to the actuator and without programmed transition enabled. Manual operation handles Transfer switches rated through 1000 amps are equipped with permanently attached operating handles and quick- break, quick -make contact mechanisms suitable for manual operation. Transfer switches over 1000 amps are equipped with manual operators. All switches must be de- energized before manual operation is attempted. Transition modes Open transition /programmed: Controls the time required for the device to switch from source to source, so that the load- generated voltages decay to a safe level before connecting to an energized source. Recommended by NEMA MG- 1 to prevent nuisance - tripping breakers and load damage. Adjustable 0 -60 seconds, default 0 seconds. Programmed transition is standard on 150 -1000 amp switches, and optional on 1200 -4000 amps. Open transition /in- phase: Initiates open transition transfer when in -phase monitor senses both sources are in phase. Operates in a break - before -make sequence. Includes ability to enable programmed transition as a back -up. If sources are not in phase within 120 seconds, the system will transfer using programmed transition. Closed transition: Used in applications where loads are sensitive to the momentary power interruption that occurs when performing open transition between sources. Closed transition is accomplished by briefly ( <100 msec) paralleling two good sources to eliminate the momentary break in the power supply. Closed transition is only available as an option on OTPC models from 1000 -4000 amps. Genset -to- genset: Either genset can be designated as the lead genset. If the lead genset goes down or is taken offline, the transfer switch starts the second genset and transfers the load. The control can be programmed to alternate between the two gensets at a set interval up to 336 hours (2 weeks). Our energy working for you.Tm www.cumminspower.com ©2010 Cummins Power Generation Inc. All rights reserved. Cummins Power Generation and Cummins are registered trademarks of Cummins Inc. PowerCommand and "Our energy working for you." are trademarks of Cummins Power Generation. Other company, product, or service names may be trademarks or service marks of others. Specifications are subject to change without notice. s- 1270ab (1/10) Power Generation PowerCommand microprocessor control PowerCommand controls are microprocessor based and developed specifically for automatic transfer switch operation. The control includes all of the features and options required for most applications. • LED lamps for source availability and source connected indication, exercise /test mode. • Flash memory stores the control settings. • Contents of the memory are not lost even if power to the controller is lost. • On -board battery maintains the real -time clock setting and the engine start time delay. • Choice of two control packages allows selection of the most suitable control for the application. Control functions Level 1 control (CO23) Open transition (in- phase) Open transition (programmed) Utility -to- genset applications Software adjustable time delays: Engine start: 0 to 120 sec Transfer normal to emergency: 0 to 120 sec Re- transfer emergency to normal: 0 to 30 min Engine stop: 0 to 30 min Programmed transition: 0 to 60 sec Undervoltage sensing: 3 -phase normal, 1 -phase emergency Accuracy: =/- 2% Pickup: 85% to 100% of nominal voltage Dropout: 75% to 98% of pickup setting Dropout time delay: 0 -4 sec Overvoltage sensing: 3 -phase normal, 1 -phase emergency Accuracy: =1- 2% Dropout: 105% to 135% of nominal voltage Pickup: 95% to 99% of dropout setting Dropout time delay: 0 to 120 sec Over /under frequency sensing: Accuracy: ±0.05 Hz Pickup: ±5% to ±20% of nominal frequency Dropout: 1 -5% beyond pickup Dropout time delay: 0.1 to 15.0 sec Programmable genset exerciser: One event/schedule with or w/o load Basic indicator panel: Source available /connected LED indicators Test/exercise /override buttons Digital display — optional (M018) Analog bar graph meter display — optional (D009) Date /time - stamped event recording: 50 events Load sequencing: Optional with network communications module M031. Provides control for eight steps of load with an adjustable time delay for each step on transfer, re- transfer or both. Our energy working for you.TM www.cunnminsoower.com Level 2 control (CO24) pen transition (in- phase) en transition (programmed) C . sed transition (includes fail -to- disconnect timer to pre ent extended paralleling with the utility) Uti ty -to- genset applications Utili -to- utility applications Gen - t -to- genset applications So - re adjustable time delays: Engi e start: 0 to 120 sec Trans er normal to emergency: 0 to 120 sec Re -tra sfer emergency to normal: 0 to 30 min Engine top: 0 to 30 min Progra med transition: 0 to 60 sec Undervol • . ge sensing: 3 -phase normal, 3 -phase emergency Accurac +/- 2% Pickup: 8 % to 100% of nominal voltage Dropout: 7 , % to 98% of pickup setting Dropout ti - delay: 0 -4 sec Overvoltage . ensing: 3 -phase normal, 3 -phase emergency Accuracy: ±2 Pickup: 95% . 99% of dropout setting Dropout: 105 °, to 135% of nominal voltage Dropout time d: lay: 0 to 120 sec Over /under fre . ency sensing: Accuracy: =1- O. Hz Pickup: ±5% to ±'0% of nominal frequency Dropout: 1 -5% be and pickup Dropout time delay 0.1 to 15.0 sec Voltage imbalance ensing: Dropout: 2% to 10% Pickup: 90% of drop. t Time delay: 2.0 to 20.' sec Phase rotation sensin : Time delay: 100 msec Loss of single phase d tection: Time delay: 100 msec Programmable genset e erciser: Eight events/schedules with or w/o load Basic indicator panel: Source available /connected Test/exercise/override button Digital display — standard Analog bar graph meter displa Date /time - stamped event re Load sequencing: Optional with module M031. Provides control for adjustable time delay for each step both. Genset -to- genset: Same functions :s above, for lead and secondary generators. Utility -to- utility: Same functions as above, for preferred and alternate source. ED indicators — optional (D009) rding: 50 events etwork communications ight steps of load with an n transfer, re- transfer, or 52010 Cummins Power Generation Inc. All rights reserved. Cummins Power Generation and Cummins are registered trademarks of Cummins Inc. PowerCommand and "Our energy working for you." are trademarks of Cummins Power Generation. Other company, product, or service names may be trademarks or service marks of others. Specifications are subject to change without notice. S- 1270ab (1/10) Power Generation Time -delay functions Engine start: Prevents nuisance genset starts in the event of momentary power system variation or loss. Not included in utility -to- utility systems. Transfer normal to emergency: Allows genset to stabilize before application of load. Prevents power interruption if normal source variation or loss is momentary. Allows staggered transfer of loads in multiple transfer switch systems. For genset -to- genset applications, delays transfer of load from lead to secondary generator. Re- transfer emergency to normal: Allows the utility to stabilize before re- transfer of load. Prevents needless power interruption if return of normal source is momentary. Allows staggered transfer of loads in multiple transfer switch systems. For genset -to- genset applications, delays re- transfer of load from secondary back to lead generator. Engine stop: Maintains availability of the genset for immediate reconnection if the normal source fails shortly after retransfer. Allows gradual genset cool down by running unloaded. Not included in utility -to- utility systems. Elevator pre - transfer signal: Requires optional relay signal module (M023). Delays transfer for pre -set interval of 0 -60 seconds to prevent a power interruption during elevator operation. User interfaces Basic interface panel LED indicators provide at- a- glance source and transfer switch status for quick summary of system conditions. Test and override buttons allow delays to be bypassed for rapid system checkout. Digital display (M018) The digital display provides a convenient method for monitoring load power conditions, adjusting transfer switch parameters, monitoring PowerCommand network status or reviewing transfer switch events. Password protection limits access to adjustments to authorized personnel. The digital display is optional with the PowerCommand Level 1 control and comes standard with the Level 2 control. User interface options Front panel security key (M017) Locks front panel to prohibit access to digital control settings. Prevents unauthorized activation of transfer or test functions. Bar graph meter display (D009) An LED bar graph display provides an easy -to -read indicator of the level of power being supplied to the load. Information displayed includes: 3 -phase voltage and current, frequency, power factor, and kilowatts. Green, amber, and red LEDs provide at- a- glance indication of system acceptability. Available as an option with the Level 2 PowerCommand microprocessor control. Our energy working for you.TM www.cumm i nsoower.corrt Control options Relay signal module (M023) Provides relay output contacts for sending information to the building monitoring and control system. Relay outputs include: Source 1 connected /available, Source 2 connected /available, not in auto, test/exercise active, failed to disconnect, failed to synchronize, failed to transfer /re- transfer, and elevator control pre- transfer signal. Loadshed (M007) Removes the load from the emergency power source by driving the transfer switch to the neutral position when signaled remotely. Transfers load back to the emergency source when the signal contacts open. Immediately re- transfers back to the primary source when available. Available for utility -to- genset applications only. PowerCommand network interface (M031) Provides connection to the PowerCommand network. LonWorks compatible for integration with building monitoring and control system. Load power and load current monitoring (M022) Measures load phase and neutral, current, power factor, real power (kW) and apparent power (kVA). Warns of excessive neutral current resulting from unbalanced or nonlinear loads. Minimum current level detection is 3 %. 02010 Cummins Power Generation Inc. All rights reserved. Cummins Power Generation and Cummins are registered trademarks of Cummins Inc. PowerCommand and Our energy working for you." are trademarks of Cummins Power Generation. Other company, product, or service names may be trademarks or service marks of others. Specifications are subject to change without notice. S- 1270ab (1/10) Power Generation • UL withstand and closing ratings OTPC transfer switches must be protected by circuit breakers or fuses. Referenced drawings include detailed listings of specific breakers or fuse types that must be used with the respective transfer switches. Consult with your distributor /dealer to obtain the necessary drawings. Withstand and closing ratings (WCR) are stated in symmetrical RMS amperes. Transfer switch ampere MCCB protection Special circuit breaker protection WCR @ volts max with specific manufacturers MCCBs Max MCCB rating Drawing reference With specific current limiting breakers (CLB) Max CLB rating Drawing reference 40, 70, 125 3 -pole 14,000 @ 480 225 A 0098-6885 200000 @ 480 , 225 A 0098-6918 14,000 @ 600 100,000 @ 600 40, 70, 125 4-pole 30,000 @ 480 400 A 0098 -6886 200,000 D 480 400 A 0098 -6919 30,000 D 600 100,000 600 150, 225, 260 30,000 @ 480 400 A 0098 -6886 200,000 480 400 A 0098 -6919 30,000 @ 600 100,000 @ 600 300, 400, 600 65,000 @ 480 1200 A 0098 -6887 200000 480 , 1200 A 0098 -6920 65,000 @ 600 100,000 OD 600 800, 1000 65,000 @ 480 1400 A 0098 -6888 150,000 (e1480 1400 A 0098 -6921 50,000 @ 600 100,000 @ 600 1000,1200 85,000 @ 480 1600 A 0098 -7312 85,000 480 1600 A 0098 -7312 65,000 @ 600* 65,000 @ 600 1600, 2000 100,000 480 4000 A 0098 -7311 100,000 480 4000 A 0098 -7311 85,000 @ 600' 85,000 @ 600 3000 100,000 @ 480 4000 A 0098 -7313 100,000 @ 480 4000 A 0098-7313 85,000 @ 600* 85,000 @ 600 4000 100,000 D 480 5000 A 0098 -8576 100,000 @ 480 5000 A 0098 -8576 85,000 @ 600* Fuse protection • Transfer switch ampere WCR @ volts max. with current limiting fuses Max fuse, size and type Drawing reference 40, 70, 125 3- and 4 -pole 200,000 @ 480 200 A Class, J, RK1, RK5, T 0098 -6885 200,000 @ 600 150, 225, 260 200,000 @ 480 600 A Class, J, RK1, RK5 1200 A Class L or T 0098-6886 200,000 @ 600 300, 400, 600 200,000 @ 480 600 A Class, RK1 or RK5 1200 A Class L or T 0098-6887 200,000 @ 600 800, 1000 200,000 @ 480 600 A Class, J, RK1 or RK5 1200 A Class T 2000 A Class L 0098 -6888 200,000 @ 600 1000, 1200 200,000 @ 480 3000 A Class L 0098 -7312 150,000 CO 600* 1600, 2000 200,000 480 2500 A Class L 0098 -7311 150,000 D 600` 3000 200,000 480 4000 A Class L 0098 -7313 150,000 @ 600* 4000 200,000 @ 480 6000 A Class L 0098 -8576 150,000 @ 600' ' CSA only Our energy working for YOU.TM www.cummi nsoower.corn 02010 Cummins Power Generation Inc. All rights reserved. Cummins Power Generation and Cummins are registered trademarks of Cummins Inc. PowerCommand and "Our energy working for you." are trademarks of Cummins Power Generation. Other company, product, or service names may be trademarks or service marks of others. Specifications are subject to change without notice. S- 1270ab (1/10) Power Generation tings Transfer switch ampere R @ volts max ele rating Max MCCB rating Drawing reference 1000, 1200 50,000 @ 480 1 II s • 0098-7312 42,000 @ 600* 1600, 2000 100,000 480 4000 A 0098 -7311 85,000 @ 600* 3000 #6 AWG - 400 MCM 100,000 480 4000 A 0098 -7313 85,000 @ 600* 4000 600 100,000 480 5000 A 0098 -85 85,000 @ 600* ` CSA only Transfer switch lug capacities All lugs accept copper or aluminum wire unless indicated otherwise. Amp rating Cables per phase Size 40, 70, 125 3 -pole 1 #12 AWG -2/0 40 4 -pole 1 #14 AWG -2/0 70, 125 4 -pole 1 #6 AWG - 300 MCM 150, 225 1 #6 AWG - 300 MCM 260 1 #6 AWG - 400 MCM 300, 400 1 3/0 - 600 MCM 1 or 2 3/0 - 250 MCM 600 2 250 - 500 MCM 800, 1000 4 250 - 500 MCM 1000, 1200 4 #2 AWG to 600 MCM 1600, 2000 8 #2 AWG to 600 MCM (lugs optional) 3000 8 #2 AWG to 600 MCM (lugs optional) 4000 12 1/0 AWG to 750 MCM (lugs optional) Our energy working for YOU.TM www.cumm Inspower.corn ©2010 Cummins Power Generation Inc. All rights reserved. Cummins Power Generation and Cummins are registered trademarks of Cummins Inc. PowerCommand and "Our energy working for you." are trademarks of Cummins Power Generation. Other company, product, or service names may be trademarks or service marks of others. Specifications are subject to change without notice. S- 1270ab (1/10) Power Generation Enclosures The transfer switch and control are mounted in a key - locking enclosure. Switches from 40 -1000 amps are wall- mounted. Switches from 1200 -4000 amps are floor- mounted. Wire bend space complies with 2009 NEC. Dimensions - transfer switch in UL type 1 enclosure Q Amp rating Height Width Depth Weight Outline drawing Door closed Door open in mm in mm in mm in mm lb kg 40, 70, 125 3 -pole 27.0 686 20.5 521 12.0 305 31.5 800 82 37 0310 -0544 40, 70, 125 4 -pole 35.5 902 26.0 660 16.0 406 41.0 1042 165 75 0500 -4896 •150, 225 I 35.5 902 26.0 660 16.0 406 41.0 1042 165 75 0310 -0414 I 260 43.5 1105 c8.5 724 16.0 400 q3.0 1093 i70 77 0310 -054er 190 300,400,600 54.0 1372 25.5 648 18.0 457 42.0 1067 225 102 0310 -1307 800, 1000 68.0 1727 30.0 762 20.6 524 48.5 1232 360 163 0310 -0417 1000, 1200 76.3 1937 36.0 915 22.7 577 54.0 1372 450 204 0310 -0482 1600,2000' 90.0 2290 36.0. 915 48.0 1219 84.0 2134 1100 499 0310 -0483 3000' 90.0 2290 36.0 915 48.0 1219 84.0 2134 1250 567 0310 -0484 4000* 90.0 2290 46.5 1180 60.0 1520 106 2700 1850 839 0500 -4485 mensions - transfer switch in UL type 3R, 4 or 12 enclosure Amp ra - . g Height Width Depth Weight Cabinet type Outline drawing Door closed Door open in mm in mm in mm in mm lb kg 40, 70, 125 32.0 813 16.0 406 46.0 1168 255 1 4X 0500 -4184 3R, 12 0310 -0453 3-pole 4.0 864 26.5 673 12.5 318 36.5 927 125 57 4 0310-0445 40, 70, 125 32.0 1080 16.0 406 16.0 1168 255 102 4X 0500 -4184 3R, 12 0500 4896 4 -pole 42.5 813 30.5 775 46.0 406 44.0 1118 190 88 4 0500 -4896 150, 225 42.5 1080 30.5 775 16.0 406 44.0 1118 215 97 3R, 12 0310-0454 4 0310 -0446 826 19.5 495 49.5 1257 410 186 4X 05 4185 1000, 1200 70.0 260 46.0 1168 32.0 813 16.0 406 46.0 1168 255 102 3R 12 0310-0455 4 0310 -0447 826 50.9 1293 80.0 2032 1100 499 4X 0310 -0744 300, 400, 600 59.0 1499 27.5 699 18.5 419 41.5 1054 290 132 3R, 12 0310-1315 4 0310 -1316 800, 1000 73.5 1867 32.5 826 21.: 529 49.5 1257 410 186 3R, 12 0310 -0457 4 0310 -0449 1000, 1200 76.3 1937 36.0 915 22.7 7 54.0 1372 450 204 3R, 12, 4 0310 -0482 1600, 2000' 90.0 2290 38.0 826 50.9 129 80.0 2032 1100 499 3R, 12, 4 0310 -0744 3000* 90.0 2290 38.0 965 51.0 1295 ::.5 2146 1250 567 3R 0310 -0745 4000* 90.0 2290 49.0 1244 60.0 1524 10 2654 1850 839 3R 0500 -4486 Dimensions - transfer switch in UL type 4X stainless steel enclosure Amp rating Height Width Depth ght lb kg Cabinet type Outline drawing Door closed Door open in mm in mm in mm in mm 40, 70, 125 3 -pole 46.0 1168 32.0 813 16.0 406 46.0 1168 255 1 4X 0500 -4184 40, 70, 125 4 -pole 46.0 1168 32.0 813 16.0 406 46.0 1168 255 102 4 0500 -4896 150, 225 46.0 1168 32.0 813 16.0 406 46.0 1168 255 102 4X 0500 -4184 260 46.0 1168 32.0 813 16.0 406 46.0 1168 255 102 4X 0500 -4184 300, 400, 600 73.5 1867 32.5 826 19.5 495 49.5 1257 410 186 4X 00 -4185 800, 1000 73.5 1867 32.5 826 19.5 495 49.5 1257 410 186 4X 05 4185 1000, 1200 70.0 1778 40.0 1016 19.8 502 59.0 1499 450 204 4X 0310 -0 1600,2000 90.0 2290 35.5 826 50.9 1293 80.0 2032 1100 499 4X 0310 -0744 Rear and side access is required for installation. Dimensions shown are for 4 -pole. For information on 3 -pole switches, call factory. Our energy working for you: m www.cum m i n soower. cord ®2010 Cummins Power Generation Inc. All lights reserved. Cummins Power Generation and Cummins are registered trademarks of Cummins Inc. PowerCommand and Our energy working for you." are trademarks of Cummins Power Generation. Other company, product, or service names may be trademarks or service marks of others. Specifications are subject to change without notice. S- 1270ab (1/10) Power Generation Submittal detail - options Amperage ratings ❑ 40 ❑ 70 ❑ 125 150 225 260 300 400 600 800 1000 1200 1600 2000 3000 4000 Voltage ratings ❑ R020 120' ❑ R038 190 ❑ R021 208 ❑ R022 220 ❑ R023 240 ❑ R024 380 ❑ R025 416 ❑ R035 440 R026 480 ❑ R027 600 Single phase connection (not available on 1200 -4000 amps) Pole configuration ❑ A028 Poles - 3 (solid neutral) A029 Poles - 4 (switched neutral) 000000000000 l Frequency A044 60 Hertz ❑ A045 50 Hertz Transfer mode ❑ A077 Open transition /in -phase D A078 Open transition/programmed ❑ A079 Closed transition (available 1000 -4000 amps, for closed transition below 1000 amps, see CHPC spec sheet S -1437) Application D' A035 Utility to genset ❑ A036 Utility to utility ❑ A037 Genset to genset Standards A046 UL 1008 /CSA certification ❑ A064 NFPA 20 compliant (not available on 1200 -4000 amp switches) A080 Seismic certification Controls ❑ CO23 PowerCommand control - Level 1 ❑ CO24 PowerCommand control - Level 2 Control options ❑ M017 Security key - front panel R M018 Digital display ❑ M022 Load monitoring (min current level 3%) ❑ M023 Relay signal module. Includes pre- transfer module for elevator control ❑ M031 LonWorks network communications module (FTT -10) Meter ❑ D009 Analog bar graph meter Battery chargers ❑ K001 2 amps, 12/24 volts ❑ KB59 15 amps, 12 volts ❑ KB60 12 amps, 24 volts Protective relays (closed transition) ❑ M036 62PL relay ❑ M038 86 Lock -out relay Auxiliary relays - Relays are UL Listed and factory installed. All relays provide two normally closed isolated and two normally open contacts rated 10 amps at 600 VAC. Relay terminals accept from one 18 gauge to two 12 gauge wires per terminal. ❑ L101 24 VDC coil - installed, not wired (for customer use). ❑ L102 24 VDC coil - emergency position - relay energized when switch is in Source 2 (emergency) position. ❑ L103 24 VDC coil - normal position - relay energized when switch is in Source 1 (normal) position ❑ L201 12 VDC coil - installed, not wired ❑ L202 12 VDC coil - emergency position - relay energized when switch is in Source 2 (emergency) position ❑ L203 12 VDC coil - normal position - relay energized when switch is in Source 1 (normal) position Miscellaneous options D M003 Terminal block - 30 points (not wired) ❑ N020 Terminal block - re- transfer inhibit ❑ M007 Load shed - from emergency - drives switch to neutral position when remote signal contact closes ❑ N009 Power connect - bus stabs (150 -1200 amp open System options construction only) IA041 Single Phase, 2 -wire or 3 -wire (not available 1200 -4000 amps) ❑ N013 Extension harness (open construction only) A042 Three Phase, 3 -wire or 4 -wire Optional lug kits Enclosure ❑ N008 Terminal lugs - cable (1600 -3000 amps only) B001 Type 1: General purpose indoor (similar to IEC type IP30) ❑ N056 Terminal lugs - cable (4000 amps only) ❑ B002 Type 3R: Intended for outdoor use (dustproof and rainproof) Warranty (Similar to IEC type IP34) D G010 Years 0 -2: Parts, labor and travel ❑ 8003 Type 4: Indoor or outdoor use (watertight) (Similar to IEC type Years 3-5: Parts only IP65) Years 6 -10: Main contacts only ❑ B004 Open Construction: No enclosure - includes automatic transfer switch and controls (call factory for dimensions) Shipping ❑ B010 Type 12: Indoor use, dust -tight and drip -tight (similar to IEC ❑ A051 Packing - export box type IP61) Accessories ❑ B025 Type 4X: Indoor or outdoor use (watertight) (similar to IEC Type AC -167 Accessories specifications sheet IP65) Cummins Power Generation North America Brazil Europe, CIS, Middle East and Africa Asia Pacific 1400 73rd Avenue N.E. Rua Jati, 310 Manston Park Columbus Ave. 10 Toh Guan Road #07 -01 Minneapolis, MN 55432 USA Guarulhos - Sao Paulo Manston Ramsgate TT International Tradepark Phone 763 574 5000 CEP - 07180 -140 Kent CT 12 5BF United Kingdom Singapore 608838 Fax 763 574 5298 Phone 55 11 2186 4195 Phone 44 1843 255000 Phone 65 6417 2388 Fax 55 11 2186 4729 Fax 44 1843 255902 Fax 65 6417 2399 Our energy working for you Tm www.cumminsoower.com 52010 Cummins Power Generation Inc. All rights reserved. Cummins Power Generation and Cummins are registered trademarks of Cummins Inc. PowerCommand and "Our energy working for you." are trademarks of Cummins Power Generation. Other company, product, or service names may be trademarks or service marks of others. Specifications are subject to change without notice. S- 1270ab (1/10) Power Generation Pro /ENGINEER 5 4 3 2 (235) I 75 (44) 9.25 1235) 1.75 (44) 7.00 (178) 2.75 (701 NOTES. I 661805. WEIGHT. 165 LBS MASS. 75 kg 7. REFER TO THE NATIONAL ELECTRIC CODE / FOR MINIMUM CLEAR SPACE IN FRONT OF // 2. DIMENSIONS IN ( 1 ARE MILLIMETERS. THIS LNCLOSURE. /, / 3. LUG CAPACIII- fl WIRE) WIRE RANGE 16 AWG -300 MCM 116.150 mm) WIRL CU -AL. GN0 LUG CAPACITY, 11 WIRE) WIRE RANGE 14 AWG -I/0 12.5 -50 mm) CU-AL 6. WIRING BENDING SPACE CONFORMS TO NATIONAL ELECTRIC CODE INFP610). 25.63 (651) 4. USE SEPERATF CONDUITS FOR CONTROL WIRING AND POWER WIRING DO NOT COMBINE. 5. SHADED AREA INDICATES WIRING AND CABLE ENTRANCE AREA DO NOT INSTALL OUTSIDE OF SHADED AREA 6.55 (166 4) 1,15 (44) /; 7.28 ((84.8) 1.75 (44) APPRON CENTER OF GRAVITY 17,33 1440.18) 9.25 (235) 7.15 (181,6) 175 (441 y 8.1? (206.25 1.75 (44) GROUND LUGS INSTALLED ON REAR WALL OF CABINET (OTY 3) 9 25 (235) 1.00 (178) 15 82 (402) 2.39 (61) 1 7 32 (440) 2. F5 13.75 (70) (349) 7.00 (178) 1.75 (44) 4,59 (117) 18.88 (479) 100. 103781 1(010111 ON PROF. RENIS(3 NOTES L 4 1 000 46 378 MOH 17.63 4.00 (448) (101) 49 0.438 (((1 4 POLE) 1:-111: 4.17;::.11 24 CM 0.11 IW Ta • r I.CIKM: 1/1 6 COLLEEN_ m 2 MORLEY e. ci OWW191'74- . •'^ N SCHOIILER ^• 1428X09 Curb POW61 0(9601(0,1 Sill CCOI PGF OUTLINE - CONTROL 000 p 1 0310_0414 l4 -•i, H • 4 T • 3 2 0 A • B T 5 I ♦ .f. 3 3 2 I D _ C B _ A 0626 -2303 IDI Pro /E7JOINIE6t i 2D ONLY DWG >E�1�1 O �� ow arum 2 sun • RA _ 20 1 HifPIF -THEW 0 - C B - A - -- - - - 1_ 1 CUSTOMER CONNECTIONS rI•TIONAL• RELAY MODULE E r STANDARD CONNECTIONS C IS RATED: 2 - - -I 30 vrc 0.60 MP i 120VM � SOLACE 1 CON CMECIED 2 NC ND SNNRCE 2 [MEMO 2 cON NE NO AY 57LRCE 1 ATI ABLE CON NE IA SOURCE z AVAILABLE ERI NE ND TEST OR EXERCISE CON ACTIVE A NC RELAY MODULE l' Isn 1'.y L -.1x11 'mon O �9 V—' -LK1 13 Mil r 0 "V —0 p 1�0 • T-:--.' '-0 1" b D MA S` 11 1 �) LOPq n COI Q x0 RESERVED RESERVED FOR [OM} FURUE USE. NOTES: NC I. 2131 PRO TB2 ART MOUNTED ON THE FRONT OF THE NCI QED TRANSFER SWITCH. TH3 15 A01HTE0 ON DE LEFT CMI - RESERVED FOP INSIDE P07(1 OF THE ENCLOSURE. MIRE USE. Q SHORN WITH SOURCE NOT COKIECIEO. NOJ & SHORN WITH SORRCE NOT AVAILABLE. NE NOI 1610. 0 SWIM NOT ACTIK. CONTACTS CiVAGE. STATE CCM RESERVED FOR DEEM 1E51 OR EXERCISE PERIOD. FUTURE USE. NO & SHUN WITH CONTROL IN AUTOMATIC MOM. CONTACTS NE © SHIM NOT ACTIVE. CONTACTS CH,LNGE STATE FOR /� CHANGE STATE IVE. CONTROL IS NOT IN STATE COON FPIEVTTRASFR AN ADIUSTAELE TINE BEFORE LOAD TRANSFER OCCURS. Qf Q 5HO111 NOT ACTIVE. CONTACTS CHUM STATE N, DEWING LOAD 9100. /� NC [n_� 5140101 WIDER NORMAL BATTERY VOLTAGE CONDITION. CONTACTS TRANSFER UMBER A HIGH BATTERY VOLTAGE w1 ? NDI I • TO CONDITION. TA A & 51011 UNDER A LOON BATTERY VOLTAM CONDITION. J MIRED CR FRONT CF TRANSFER SNITCH. AVAILABLE ON ML WITS. S2 FOR CUSTOMER USE M YER SWITCH AIR IL NARY AUxILT SMiTd CON TRANSFER NO SNITCH VERGE/KT FLAIL TART SNITCH COON , t • ETS N TRANSFER SMITE AORIAM CONTACTS RATIO: 20 NIPS. 150 vM -- S6 1 • • 'ATS E IN TO ENGINE GENERATOR CONTROL • Pa $"' 1 �o WEER ROPER II6IAL1iATIRI OPPVIR[NG 1(15 IF FOR KFMO. TIPPER LOCATION. DEIKEN THE 10115[1 CONTROL AND TRANSFER SNITCH. MI PAT/FUELING SISTERS. REFER TO 515111 INTERCONNECTION CRAM1AG FON 010 F 1 Pi n-0 l2Ni IN °iN —j a� I. COW 310101 RIP 11 TT om¢R 4 R [MEET xIRiNO. PIN FOR CUSTOMER USE -7 12 2 rF. IARR 261 TO USE ROOM TEST. TRANSFER INIIBIT AND TOAD 900 CONNECT EN OPEN [COMET ECTKCN TIE ARLICARE. CLOSENTI AND TACT TO 11B2-111. T CLOSE 1NE [DOTE[, TO MOTIVATE THE IIRCTION. NOTE TEAT LAND SEE REMOTE ZEST OFER ITNIBIT LOAD 01E0 NOPIIONALI NR-6 ni m 1 TIMBER 11(1111 6'M T Fus 121- IIEOPO 9(➢ P DAWN L J 10. SEE 9-EFT 7. • r I ATP BATTERY T[RS nCH(¢R AL MIS il. SET SHEET 7. II. SEE SHEET 2. IN. SEE sty' A. 11. SEE SKET 4. 15. SEE SHEET 5. ® THE FOLOWING WILL CAUSE A BATTERY CHARGER ALARM OUTPUT: LOX BATTERY VOLTAGE HIGH BATTERY VOLTAGE LOW AC INPUT VOI SAGE UM ITT 10 ONSET LMT 1 [OMAN HIGH AC INPUT VOLTAGE 3 AN01 POLE Q-- J OIK 10600 AMP, WPM 10-120 AMP A OIPCSE 300600 AMP IS ONl]ONM HID MIST BE MULLED CONW1011 IN ON� TO 010. °'- 10 11 10 mail l T•TIONRL. • r BATTERY L J I . can CH •• R ALARMS M LINE N , CONTACTS TED: FAILUE X[ 1 APPS AT 3, DC OR 51 MA I2DVAC MAR NO can vO TAU WART NE SI Qn-6 ND Cm La' E"7 vOLI NC STOMA L rOPT IONRL NETWORK MODULE • r2r xl PI • u 1 12I 0 ' ORAL, BATT • CHARGER ALARM 2 AMP. AMP. 15 AMP • I r rx-° OUTPUTS LOC D ON BOTTOM OF N BATTERY CHARGER E l 1 FOR FACTORY USE ONLY COMMON ALARM OUTPUT /�� I TACT RATING L9 1 - AT 30 HOC 1 REMOII TT ' RAI URI SENSOR 1NPU I • , • o DVERCURRENT 120 BOLT 1 PHASE L -N I PHASE NE HOW cult 130 -' 1 NIGN CHARGER IEMPE NATURE 250 VOLT 3 PURSE 0101 100 KAT 3 P00 BATTERY FAILURE 220 VOLT 3 PHASE 210 VOLT 3 PHASE HIGH BATTERY TEMPERATURE' 3130 VO T 3 PHASE 115 110..3 RN4 DATA I USE TWISTED PAIR ANTI DATA 2 DATA DATA „13~1 DETO 2 L rOPT TONAL J 440 VOLT 3 PHASE NOT AVAILABLE ON 2 AMP CHARGER _is 180 VOLT 3 PHASE T ID t A /6ER BIT DIGITAL 11000L 41 USE THE INVERTER REMOTE TEMPERATURE PROS. oPTia6: DISPLAY MLLE (PART NO. 0103.05301 KTl RO EE ROAN 910 18. SEE SHEET 2. RELAY MODULE RETRANSFER INHIBIT RETNANSFER J CMECI A 1UPCR OR A CLOSED [(RIBA CONTACT KNEEN TB3 -53 AND 111 1113-51 10 INHIBIT RETRMSER. L J BATTERY CHARGER BATTERY [BARGER MANTIS RETRAIOER INHIBIT CI.SSITICAIId OF CHARACTERISTICS CRITICAL MICR O NPPROVCo LARK WIN I "O.Irae iG iwvnn °A. alms 11 j' 111 0 QR�6 �...... MINOR 1AM1 DAT1 LINE DELON SYMBOL AM ES TO UPPER LIMIT LITE ABOVE SYMBOL 0 APPLIES TO LONER IIMIT NO LINES WITH SYMBOL ARIES TO BOTH LIMITS V KEY [NSUNI ZION 11N3 TOLERANCE) CO IAN sou WWII .., • s 0 0041 001011111 ,.K i C) - i. o DT0N• AA �Y v WD - TRANSFER SWITCH _ s • .....111.• s 0 .e .10-.a x °3.811 =Ar:`~°O II fA .11101101 fIR 2001 ._, a °1 BLU� :MI p 50 o, mod' I4 behn n 400 srlu a r.. PGA 0626 -2303 1"51'D 6 I s I 4 I` 3 2 I I • • • 0626 -2303 I D I Pro /ENGINEER ( 2D ONLY DWG SCHEMATIC DIAGRAM \Pfi -I F-N BAT IE2:, CHARGER OPTIONAL) 102 CND TT@ -3 I 11N III (0(0(11 ON Si KI3 PXASC CO 1(01 50111 J1 -1, PI I 11-2, PI -2 JI 3 PI 3 111 5. PI 5 NA NB NC NN MAIN BONDING JUMPER Co ) ) ) II GROUND VPP 10VDC Power Module I JIB 112 -2 I0IR0NS2217 PRPRO*GRIWi0300 112 -1 T12 -I K2 NI I1 6,01 -6 MOB SR I ( I .0 MEW RNOKO NC0 015_0 rnl [DAD WOES 1hsTUCO JI -B ,•PI -B N0-B N00 59 C NC ...LAYS{ 2 Cl.„ JI -7 -PI -7 C -(0.. PI 10 K2 2 L K3 7 JI -IL Pi i2 - -- 003 55 C NCQ ATS -N N S13 C KI K2 r REL• —I —E lILOAD SHED I IOPT11 - 1IRELAY K0 IJIS-ID I 115- , A I. LWD SIED J n. -I _J Power 112 -IA Module I V-P MOVIE 115 (12 -U TO AU i3 NOT IN 112 -II COM TBII 12 -17 TRANSFER A 10 COM 312 PROGRAMMED TRANSITION I I 112 -18 It SOURCE 2 POSITION 112 -Z 111 nN loa(CND 1011 N N 170111 surf a ASSIFICAl10N aF ONNKILRIS1 ICS C011ICA MA10A fID APPRP20 L.N slim MINOR (NONE) DATE 0111Sm LINE BELOW SYMBOL Q 041'1.1E5 TO UPPER LIMIT LINE ABOVE 5YNBOL S APPLIES TO LOEO LIMIT ND LINES WITH SYMBOL AP41.1L5 TO BOTH LIMITS V KEY 100(00C110N ONO TOLERANCE) N ONLY AVAILABLE ON OTPCSE MODEL L NEUTRAL: NEUTRAL BAR 1130 ON 3 ROE TRANSFER 5NIT065 OILY. LA-1— LBO LC LNG J CUSTOMER I O40 CABLES K3 PRO(RFYO[0 TRANSITION ISLAM NI TRANSFER 10 NORM RELAY CB HA1N CIRCUIT BREAKER III LINEAR MOTOR CI MOTOR MIN CAPACITOR CBI CIRCUIT BREAKER (00`11007 71: R1 t10 NOTES: (NI I On en:. I on • IRAC I n IN 110N1190 10. All [EVICTS ARE 908* OE {(ERGIZEO, WITH At TRANSFER SM11CH OLOSEO To 6(06. 1 POLE TRANSFER SNITCH SHOWN. ON 3 POLE NOCEL5 THE SWITCHED NEUTRAL POLE IS REPLACED WITH A SOLID NEUTRAL BAR. 5I LIILIIR HONOR DISABLE 961 9610 3 RA 1RANSFODER FRIARY RIVERS. K2 TRANSFER 10 EMERGENCY RELAY KI LOA[ SHED RELAY IP. FOR SINGLE RCN. WITS: 120/210. 3 *001 - CONNECT POKIER CONES TO A AND C 120 L -N, 2 WIRE - CONNECT POWER CABLES TO A AND NEUTRR. ill . FOR OTPCSE 000(1, LIST OF MAIN CIRCUIT BREAKER TYPE SHORN BELOW: SNITCH RATING MAIN CIRCUIT BRENNER TIRE 10.(25A SQUARE D. TYPE 'RIG• 300 -000A SQUARE D. T(P1 • PJ• 00 00T SCALE P1(11 I' 1N.I..n e Inl.vnniwv.nnu 110 0 OJAI 04111101 /A /1 RL: i:7*3 ivy �� 11IA 04141,01 06101/01 Mt CON CUMMINS POSER GENERATION "'WD- TRANSFER SWITCH `col— EIT19E.RNA 5.11 0 n -AN Ya PGA 0626-2303 I270 6 • 4 1` 3 2 • • 0626 -2303 10 Pro /ENGINEER 1 2D ONLY DWG Lift TO LIK VOL 1ADF PONER NOIULE 1 TRANSFORMER COMECTIONS 120 VAC I PHASE 2 WIRE ttu MW rR ■ EA V 1r 1.20 RI f CA 240 AC 3 NI RC 0•11 W 2 K rill E f INN t 190 -240 VAC 5C . HIRE 1111 MA 1111 ER • if 411 K f 1 [C 3 00 -1110 VAC ;qpg NITO 1 111 WI 9 1 r K !0 I EP 11 �3 . �f r NB I ! 10 CC SCE 0626-2304 FOR 600 VOLT COWEC11O115. CLASSIFICATION OF CHARACTERISTICS CRITICAL 1143037 O APPROVED IAR41 91114 1110 1401E1 BAIL 0140143 LIK BMW SYMBOL Q APPLIES TO UPPER 11(110 CPC ABOVE 51(0104 Q APPLIES TO LOWER LIME NO LINES 141101 SYMBOL APPLIES TO BOTH LIMOS V KY 1161RIIC110V LAO TOLERANCE, ([011 fll If 17 Eliim- 01 00 001 SCAIF fl14T 1+ rlww•woaaamt. Is 1• saa 10- IA OwR1 *NA 10. .10 •011.0 mo 7♦w���PE't? 0( 4AOLS10A1 111! 00/11 /04 QUO W4 CDRoios P0010 GENERATION 01,1 CON WD- TRANSFER SWITCH GE`:: AT:IVIT-7aA un A PGA 0626-2303 II., p 6 • T 3 • A • 0626 -2303 Pro /ENGINEER I 2D ONLY DWG REAR VIEW OF DOOR 1701 1NETNORK MODULE DIGITAL MODULE I 126 SERVICE TOOL 122 RELAY MODULE 127 2 12 -5 72 -5 12 -7 12-10 In' liii OLD QBII WW WED W102 1m WEIS 11 POKIER MODULE DISPLAY MEMBR 1281 125Po RIBBON CABLE POWER MODULE I I'I 82-2 51 -5 KI -B K] -A %ELI 3 NOR NIVEA RPDAAI eitJULI iuoFlW113 TTY 117 r o V K14 IQ 81N1-I -1 / 124 2-4 P6 -2 GMSICABINEII K3 -22 -2 32 -3 -51-1 -7 OEM ego Kin NO MB ©F7 ©© K3 -9 - 1111 51 -NC- 51 -7 tin CBI-2- K34 LIII 55 -NO- K3-1 MIIal 10 9 -NR- K3 -2 ® SB -NE K2 -B ®® EA MU CB- - ®® EC STANDARD WIRING LEFT SIDEWALL 12 P2 K3 -B ti I 53 -C 112 -5 till 5] -ND- 112-2 ©© 51 -A9- 222 -I OO TIP-7- 122-1 ©fttril 1824- 321 -8 n4 182-5 J22 -B 182-4— P5-1 ti0 T82-3- 322-6 tiEI T82 -2- 122 -I2 mm ]R-8- REAR WALL OF CABINET AN IS USED ON 1 POLL NOELS ONLY. TRANSFER SWITCH 4 4 4 PI -I PI-2 PI -3 PI -5 181 ID 0 0 0 O 52-N0 52 -14C P2 -I ICI -2 CI-I S2 -C TB I -3 51-C I 59t 58 { S6 SG- 56 -C 182 GAO P7 -S P2 -B P7 -7 P2-N P2 -5 P2 -1 P2 -10 II I U 0 U U 0 rMI-END H 182 -I till' U 51 till' till' 181-1 P2 -2 PI 6 PI -10 TBI -2 CBI ErIII-ELK PI -7 11 -1011 CI f S1{ -E111-RED At 101 -2 l re4 No S6 T01 -8 CI -I - CAI-I- CI-2 - CNO - MI RED ILK 4111 GAD P7 -3 PI I? PI-11 M r10 53-C SS-C SI-C PI -13 �I -I1 LBPI -IS LIPI it l I I +�� as nl.lml .III I IW nuer I � Icu n n I °snot PI -5 PI -11 L NEUTRAL RARE NEUTRAL BAR IS USED ON 3 POLE MODELS ONLY. M0105: SEE SKE1 3 FOR 11111 PIPER CONKCI TONS. 111 ALL SINGLE PHASE, 2 OR 3 MIRE WITS: THE HIRE CONNECTED FROM 11-2 TO T1II -1 IS NOT PRESENT. IN ADDITION, ON 120 VOLT L-N, 2 HIRE THUS: TIE HIRE COINECTED FROM NI -I TO 11 -3 HILL BE CONNECTED FROM KI -I TO 11 -5 AND DC HIRE COIN[CTED FROM K2 -4 10 11 -15 HILL BE CONNECTED FROM 82 -I TO 11 -I1. B - GNU( 000R/ _ C11 GND 1CAB1K11 6 S CLASSIFICAl1R1 OF CIYRACTERIST ICS CRITICAL *51Oi II) MPROVED LAM SMIIM MINOR (WWI BArr 01i11129 LINE BELOW SYMBOL Q APPLIES TO UPPER LIMIT 131 ID 00 NOT MALT PRINT Lilt ABOVE 511001 0 APPLIES TO LOWER LIMIT • NO LINES WITH SYMBOL APPLIES 10 BOTH LIMITS B 8880 M1rviu 101 . V KEY INSTRUCTION 110 TOLERANCE) 4 T 3 • 8101/°1 I\ I 01011 IC171 014 1°In7° yi"; 4•? ccirk r tftlr6 srll A 2 stn L°°[ CLOWNS POWER G[N[RATION WY-TRANSFER SWITCH PGA 0626 -2303 1:751? A 8 A 6 l y 3 2 0626 -2303 IDI ProfENGINEER I 20 ONIY DWG 020 I 2 POSITIONS MPINTAINEO I -I I- 2 127-5— 3 —I I- 4 — 127 -11 MEM NEMO P5 CHAR REAR VIEW OF BOOR KTMCWW MODULE SERVICE TOO126 L 811611 MODLE122 E 122 103 -51 143 -52 011l 520 -3 103-53 DIGITAL MODULE I POWER MODULE DISPLAY MEMBRANE 128 a PANAL 725 0 71I POWER MODULE I TBII SEE SWEET 3 FOR JIMPCR PLACEMENT 012 181 -4I 783 -47 TH3-43 183 -N4 TH3 -N6 TH3-05 TB3 -95 TB3 -N2 -NR K2 K3 K4 IR 51 44 -7 K1 -4 520 -4 P6 -2 0740 a©0 o©© 11 PI 1111 Vo 11 11N11i on �� mm 1111 BIM 27 22 OPTION WIRING T133 mm mm mm mm mm mm RIM STTUI m® IFFT SIBEWALL P5 -1 P5 -7 P5 -1 PS -5 P-7 P5 5 -6 P5-0 P5 -10 P5 -B 130 -1 130 -2 J21 -I 1210 ONO GAO KEA KNA 81 -6 TBI-I RIBBON CABLE TO 12 ON DIGITAL MOBILE KNA-AI TB I-B KEA -AI- TOI-3 TB] 3 cpuII I m.w. lzal T f-� I- 1��cI+�I n i- lescroo REAR WALL OF CABINET NI IS USED ON 4 POLE PIXELS 0410. TRANSFER SNITCH TBI -B CIJYSSIF ICATIOI 6 CWYGCILRI5TIC5 CRITICAL MAJOR O APPROVED uw4 slur MINOR INONE1 DATE 0111141 LINE 6E1011 SYMR0. Q APPLIES TO 1PPER LIMIT LINT ABOVE 51980. Q APR IES TO LOWER LIMIT NO LILACS WITH SYMBOL APPLIES TO BOTH 118175 V KEY INSTRUCTION INO TOLERANCE) CBI CI 1 55-C R — 614 -A2 — MNA -A2 — 183 -04 CC\ 5ND ICABIIEII R _ _ _ LNLUTRAL 1W) IEOTRAL BAR BUSED OM 3 POLE MOEELS OILY. NOTF5: 15. WIRING FOR RELAYS RNA AND KEA IS TYPICAL. POWER CONNECTIONS MAY VARY SLIGHTLY IF MORE OR LESS RELAYS ARE USED. MI RFD ONO MK)� 58 59 n � I 1.74 I mscupprea .n.0 Is 00 101 SCAIf 111111 It IDA .1111.111 )10-111 WIN 11 KIRI V 1 NANAUS11A1 LIEU Dm m1 08 /01/01 Nrt OM CUMMINS POWER GENERATION ID-TRANSFER SNITCH jr `:s I'Eti2"JP a SRC li. Ixr zee 1Ac PGA 0626 -2303 I575l D 6 0 4 1` • • 0 jum Tmax Molded case circuit breakers AIMAILLir ,i„ Ira Introduction ABB is once again demonstrating its commitment to new product development and its superiority in product technology. Never before has the industry seen such high performance, versatility and standardization in a range of molded case circuit breakers. The ABB Tmax line of circuit breakers, with a range up to 3000A, has several key features that go along with its very small size: • Double insulation - this construction characteristic allows for the UL Listed field installation of internal accessories without exposure to energized parts. • Complete range of electrical and mechanical accessories • Positive operation - breakers from ABB ensure that the toggle Indicates the precise position of the moving contacts. This guarantees safe and reliable signaling by the device. • Installation - Tmax molded case circuit breakers can be installed in panels and switchboards in either the horizontal or vertical planes while being fed from either end without any derating of their performance characteristics. • Interrupting ratings at 480VAC up to 150kAIC. • Compact size • All Tmax molded case circuit breakers are UL Listed and IEC rated for global application and acceptance. • All versions of the Tmax family are suitable for reverse feed applications. The ABB Tmax product line has the performance and accessories to satisfy all industry requirements in the 600VAC to 600VDC ranges. Frame sizes — Eight basic sizes The ABB Tmax series includes eight basic frame sizes as well as the T1 single pole with the range rated from 15A to 1200A at 480VAC. The various versions carry the following interrupting capacities: • B Basic breaking capacity • N Normal breaking capacity • S Standard breaking capacity • H High breaking capacity • L Extra high breaking capacity • V Very high breaking capacity Derived versions • Thermal magnetic • Electronic • Molded case switches • Motor circuit protectors (MCPs) • Direct current (DC) rated ABB Tmax versions • Fixed: all models • Drawout or plug -in: T2, T3, Ts3, T4, T5, T6 and 17 • UL File #E93565 (breakers and MCPs) #E116596 (Accessories) #E116595 (Molded case switches) Low Voltage Products & Systems 16.1 ABB Inc. • 888 -385 -1221 • www.abb.usAowvoltage 1 SX0000023CO202 Selection Guide Circuit breakers for power distribution T4 - T8 m In15A = 10kA®277 VAC 10kA ®347 VAC (2) In15A = 35kA ®240 VAC 14kA ®460Y/277 VAC 0) T5 600 with electronic trip units only and in three pole version- ® 2p T4N250 and T5N400 available only in N interrupting capacity. 0) In from 15A up to 30A =65kA ®460 VAC ® Applies to MCS only. Low Voltage Products & Systems 16.3 ABB Inc. • 888 -385 -1221 • www.abb.us/lowvoltage 1 SX0000023CO202 Tmax T4 Tmax T5 Tmax T6 Tmax T7 Insulated case T8 /S8 Type Frame size [A] 250 J 400 -600 ® 800 1000 -1200 1600, 2000, 2500 & 3000 Number of poles [Nr] 2 -3 -4 O 2 -3 -4 ® 3 -4 3 -4 3 Rated voltage AC (50 -60Hz) [V] 600 600 600 600 600 DC [V] 600 600 600 T8 S8 Interrupting ratings N S H L V N S H L V N S H L S H L T8V S8V 240V AC [kA rms] 65 100 150 200 200 65 100 150 200 200 65 100 200 200 65 100 150 125 125 277V AC [kA rms] 347V AC [kA rms] 25 35 65 100 150 25 35 65 100 150 35 50 65 100 50 65 100 125 100 —4>480V AC 1 [kA rms] 600Y/347V AC [kA rms] 600V AC [kA rms] 18 25 35 65 100 18 25 35 65 100 20 25 35 42 25 50 65 100 85 250V DC (2 poles in series) [kA rms] 500V DC (3 poles in series) [kA rms] 500V DC (2 poles in series) [kA rms] 25 35 50 65 100 25 35 50 65 100 35 35 50 65 600V DC (3 poles in series) [kA rms] 16 25 35 50 65 16 25 35 50 65 20 20 35 50 25 Trip units TMF • TMD/TMA • • • ELT MA Electronic • • • • Dimensions H [in/mm] 8.07/205 8.07/205 10.55/268 10.55/268 15/382 15.75/400 W 3p [in/mm] 4.13/105 5.51/140 8.26/210 8.26/210 16.8 / 427 15.98 / 406 D [in/mm] 4.07/103.5 4.07/103.5 4.07/103.5 6.06/154 (toggle) 7/178 (motor) 11.2 /282 9.53 / 242 Mechanical life [No. operations] 20,000 20,000 20,000 10,000 15,000 10,000 m In15A = 10kA®277 VAC 10kA ®347 VAC (2) In15A = 35kA ®240 VAC 14kA ®460Y/277 VAC 0) T5 600 with electronic trip units only and in three pole version- ® 2p T4N250 and T5N400 available only in N interrupting capacity. 0) In from 15A up to 30A =65kA ®460 VAC ® Applies to MCS only. Low Voltage Products & Systems 16.3 ABB Inc. • 888 -385 -1221 • www.abb.us/lowvoltage 1 SX0000023CO202 General information Catalog number explanation T3 S 080 T W - 4 xxx • 1fpA r•nnr)ectors W = None L = Lugs included Accessories (added in alpha- numeric order) a A = Auxiliary Switch S_ = Shunt trip with voltage code U_ = Undervoltage release with voltage code • Number of poles -1 =1 pole (T1 only) -2 = 2 pole -A — A redo None = 3 pole • Trip unit function B = LS/I (AC only) - AAnlriatl roes g, .t -h I MCS) T = Thermal- magnetic m = magnetic oniy tmt,r) E5 = Electronic MCP (AC only) C = LSI (AC only) E = LSIG (AC only) • Current rating 015 = 15A 080 = 80A 100 = 100A 99R — 99RA 250 = 250A 4UU = 4UUA 600 = 600A 800 = 800A 1200 = 1200A • Interrupting rating class B = Basic N Normal S = Standard n =rngn L = Extra High V = Very high • Frame size T1 = 100A T2 = 100A T3 = 225A Tc4 — 99RA T4 = 250A Al T3 - 400A, 000 T6 = 600A, 800A 17 = 1000A, 1200A S Consult ABB for factory installed accessories. 16.4 Low Voltage Products & Systems 1SXU000023CO202 ABB Inc. • 888 -385 -1221 • www.abb.us1owvottage T4 250A, 600V A Adjustable thermal magnetic 20A - 250A Frame Breaker IC at 480VAC Rating Magnetic trip 2 pole, 600VAC /600VDC catalog number List price 3 pole, 600VAC /600VDC catalog number List price T4N 25 125A 150A 200A 250A 625 -1250 750 -1500 1000 -2000 1250 -2500 T4N1251W -2 T4N150TW -2 T4N200TW -2 $1,584 T4N125TW T4N150TW T4N200TW $1,667 T4N2501W -2 1,631 T4N250TW 1,717 125A 150A 2 ^DA 625 -1250 750 -1500 1000 -2000 1250 -2500 - - - - - - - - T4S125TW T4S150TW T4S200TW 2,067 T4S 35 250A T4S250TW 2092 T4H UL Current Limiting 65 125A 150A 200A 250A 625 -1250 750 -1500 1000 -2000 1250 -2500 - - - - - - - - T4H125TW T4H150TW T4H200TW 3,767 T4H2507W 3,832 T4L 100 125A 150A 200A 250A 625 -1250 750 -1500 1000 -2000 1250 -2500 - - - - - - - - T4L125TW T4L150TW T4L200TW 5,995 T4L250TW 6,110 T4V UL Current Limiting 150 125A 150A 200A 250A 625 -1250 750 -1500 1000 -2000 1250 -2500 - - - - - - - - T4V125TW T4V150TW T4V200TW 6,847 T4V250TW 6,887 16.18 Discount schedule S4T [T4] Low Voltage Products & Systems 1SXU000023CO202 ABB inc. • 888 -385 -1221 • www.abb.us/lawvoltage • O Accessories Mechanical T1 - T7 KT1HTC -3 KT4LTC -3 Standard cable terminal Frame Wire Size Catalog number (set of 3) List Price Catalog number (set of 4) List Price T1 T2 T3 Ts3 14 AWG -1/0 14 AWG -1/0 14 AWG - 1/0 4 AWG - 300 kcmil 14 -2 14 -1/0 2 -4/0 4 -300 kcmil Integral KT2100 -3 KT3100 -3 KT3225 -3 K3TA 0) K4TB 0) K4TC K4TD m Integral $ 9 KT2100 -4 9 KT3100 -4 18 KT3225 -4 6 K3TA-4 Q) 6 K4TB -4 0) 6 K4TC -4 Q) i5_- K4TD -4 DT4 14 AWG -1/0 6 AWG -350 kcmil KT4100 -3 KT4250 -3 KT4100 -4 KT4250 -4 $1- 2 12 24 8 8 8 _20 12 T5 O T5 T6 T6 O T7 O 250 kcmil -500 kcmil (2) 3/0 -250 kcmil (2) 3/0 -500 kcmil (2) 250 -500 kcmil (3) 2/0 -400 kcmil Q) (4) 4/0 -500 kcmil KT5300 -3 KT5400 -3 KT5600 -3 K6TH K6TJ KT7X1200 -3 45 45 225 75 135 560 KT5300 -4 KT5400 -4 K6TH -4 K6TJ -4 0) KT7X1200 -4 40 60 60 100 180 747 Standard cable lug kits with power control taps Frame Wire Size Catalog number (set of 3) List Price Catalog number (set of 4) List Price T3 14 AWG - 1/0 4 AWG - 300 kcmil KT3100 -3C KT3225 -3C $18 18 KT3100 -4C KT3225 -4C $19 31 14 AWG -1/0 K4TBC 12 K4TBC -4 20 Ts3 2 AWG -4/0 K4TCC 12 K4TCC -4 20 4 AWG -300 kcmil K4TDC 21 K4TDC -4 31 T4 14 AWG -1/0 6 AWG -350 kcmil KT4100 -3C KT4250 -3C 15 36 KT4100 -4C KT4250 -4C 20 48 T5 250 kcmil -500 kcmil KT5300 -3C 51 KT5300 -4C 68 T5 a) (2) 3/0 -250 kcmil KT5400 -3C 51 KT5400 -4C 68 T6 (2) 250 -500 kcmil K6THC 0) 81 K6THC -4 ® 109 T6 (3) 2/0 -400 kcmil K6TJC 0) 141 K6TJC -4 m 190 Terminal covers for fixed breakers - Low profile -kit Includes two pieces Frame Catalog number (3 pole) List Price Catalog number List (4 pole) Price T1 T2 T3 Ts3 T4 T5 T6 17 KT1 LTC -3 KT2LTC -3 KT3LTC -3 KTS3LTC -3 KT4LTC -3 KT5LTC -3 KT6LTC -3 KT7XLTC -3 $ 35 40 50 55 55 60 75 80 KT1LTC-4 KT2LTC -4 KT3LTC -4 KTS3LTC -4 KT4LTC -4 KT5LTC -4 KT6LTC -4 KT7XLTC -4 $ 47 54 68 74 74 81 101 108 Terminal covers for fixed breakers - High profile -kit includes two pieces Frame Catalog number (3 pole ) List Price Catalog number List (4 pole) price T1 T2 T3 Ts3 T4 T5 T6 17 KT1HTC -3 KT2HTC -3 KT3HTC -3 KTS3HTC -3 KT4HTC -3 KT5HTC -3 KT6HTC -3 KT7XHTC -3 $ 37 43 53 58 58 63 85 90 KTIHTC -4 KT2HTC -4 KT3HTC -4 KTS3HTC -4 KT4HTC -4 KT5HTC -4 KT6HTC -4 KT7XHTC -4 $50 58 72 78 78 85 108 115 O Comes standard with high profile terminal covers. ® Uses front extended spreaded terminals... refer to technical catalog. CD Discount schedule SA. Low Voltage Products & Systems Discount schedule SAT [TO] — T1 -Ts3, T6, 17 Accessories 16.43 ABS Inc. • 8138- 385.1221 • www.abb.us/lowvoltage Discount schedule SAT5 [TZ] — T4 -T5 Accessories 1SX0000023CO202 172R- 101098 I REV.: 1 I 3/4 7 3/4 4 1/2 1 1/2 DIA HOLE FOR ATTACHMENT TO CONCRETE (4 TYP) 1 1/2 3/4 I— 21/4 1/2 REMOVABLE ADJUSTING BOLT (NOT SHOWN IN TOP VIEW FOR CLARITY) (BASE PLATE) 1/2 DIA HOLE FOR ATTACHMENT TO STEEL (2 TYP) 4 3/4 (VIEW CUT AWAY FOR CLARITY) 1/2 -13 UNC TAPPED HOLE (2 TYP) COMPRESSION STEEL SHIM PLATE (REMOVE AFTER SPRING ADJUSTMENT) 'nI CD CD c. CD c= C= CD CD C= REV. DESCRIPTION DATE BY MODEL M2SS-1C SEISMICALLY RESTRAINED VIBRATION ISOLATOR FOR 1" DEFLECTION RATED ALLOWABLE SEISMIC RATED LOAD SPRING RATE SOLID LOAD COLOR G RATING DEFLECTION MOUNT SIZE (LBS) (LBS /IN) (LBS) CODE (IN) HORIZONTAL M2SS.1C-500 500 0.83 602 750 BLACK 3.0 M2SS -1C-600 600 0.75 800 900 DK YELLOW 2.5 M2SS -1C -740 740 0.75 987 1184 YELLOW 2.0 M2SS- 1C -1040N I. 1040 0.75 693 1545 _ Y RL�ONW/ , 1.4 1/4 4 F FREE 8 OPERATING HEIGHT ELASTOMERIC SNUBBER ELASTOMERIC CUP 1/2 LIMIT STOP (NOT SHOWN IN TOP VIEW FOR CLARITY) (3/16) NOTES: 1. ALL DIMENSIONS ARE IN INCHES, INTERPRET PER ANSI Y14. 2. STANDARD FINISH: HOUSING - POWDER COAT (COLOR:BLACK), SPRING - POWDER COAT (COLOR: SEE TABLE), HARDWARE ZINC - ELECTROPLATE 3. EQUIPMENT MUST BE BOLTED OR WELDED TO THE TOP PLATE TO MEET ALLOWABLE SEISMIC RATINGS. 4. ISOLATOR BASEPLATE MUST BE ANCHORED TO STEEL EITHER BY WELDING OR WITH MIN (2) 3/8 DIA A325 BOLTS, OR IT MUST BE ANCHORED TO CONCRETE WITH (4) 3/8 DIA ANCHORS WITH ALLOWABLE LOADS OF 1000 POUNDS SHEAR AND 800 POUNDS TENSION OR AS DIRECTED BY THE VMC GROUP. 5. ALL SPRINGS ARE DESIGNED FOR 50% OVERLOAD CAPACITY. 6. REFER TO SHEET 2 OF 2 FOR INSTALLATION INSTRUCTIONS. 0 0 O 0 0 0 © ® ISOLATOR SELECTIONS LOC 1: LOC 2: LOC 3: LOC 4: LOC 5: LOC 6: LOC 7: LOC 8: CUSTOMER EQP'T. TAG: NOTE: MATERIAL SHOWN IS FOR (1) SET. OTHER MATERIALS, COMPOUNDS, OR FINISHES WITH EQUAL OR SUPERB)I PROPERTIES MAY BE SUBSTITUTED AS THEY BECOME AVAILABLE. CERTIFIED FOR: JOB NAME: CUSTOMER: CUSTOMER P.O.: SALES ORDER: MODEL M2SS -1 C VIBRATION ISOLATOR WITH INTEGRAL SEISMIC RESTRAINT AND EXTERNAL ADJUSTMENT FOR 1" DEFLECTION THE VMC GROUP The Power of Together Bloomingdale, NJ 07403 Houston, TX 77041 SCALE NONE SHEET: 1 OF 2 Somber 'ANWAR DRAWING NO.: PROPRIETAR T AS OTHERWISE AGREED IN WRITING, THE INFORMATION AND DESIGN DISCLOSED HEREIN ARE THE PROPERTY OF THE VMC MUST NOT BE COPIED OR DISTRIBUTED OUTSIDE THE VMC GROUP EXCEPT TO AUTHORIZED PERSONS WITH A GENUINE NEED WHO BY THE OF ACKNOWLEDGE THE VMC GROUP'S OWNERSHIP AND AGREE TO MAINTAIN THIS INFORMATION AND DESIGN IN STRICT CONFI • • • 172R- 101101 'REV.:4 1. READ INSTRUCTIONS IN THEIR ENTIRETY BEFORE BEGINNING INSTALLATION. 2. ISOLATORS ARE SHIPPED FULLY ASSEMBLED AND ARE TO BE POSITIONED IN ACCORDANCE WITH THE SUBMITTAL DRAWINGS OR AS OTHERWISE RECOMMENDED. 3. SET ISOLATORS ON FLOOR, HOUSEKEEPING PAD, OR SUB -BASE, ENSURING THAT ALL ISOLATOR CENTERLINES MATCH THE EQUIPMENT MOUNTING HOLES. THE VMC GROUP RECOMMENDS THAT THE ISOLATOR BASE PLATES ( "B ") BE INSTALLED ON A LEVEL SURFACE. SHIM OR GROUT AS REQUIRED, LEVELING ALL ISOLATOR BASE PLATES AT THE SAME ELEVATION (1 /4 -INCH MAXIMUM DIFFERENCE CAN BE TOLERATED). 4. ANCHOR ALL ISOLATORS TO THE FLOOR, HOUSEKEEPING PAD, OR SUB -BASE USING THRU HOLES ( "C') FOR CONCRETE OR ( "D ") FOR STEEL AS REQUIRED. USE ANCHORS MEETING THE DESIGN REQUIREMENTS SPECIFIED ON SHEET 1 OF 2. WELDING TO STEEL IS PERMITTED PROVIDING THE WELD ACHIEVES THE REQUIRED STRENGTH. 5. ISOLATORS ARE SHIPPED TO THE JOBSITE WITH (2) REMOVABLE SPACER SHIMS ( "E ") BETWEEN THE TOP PLATE AND THE HOUSING. THESE SHIMS MUST BE IN PLACE WHEN THE EQUIPMENT IS POSITIONED OVER THE ISOLATORS. 6. WITH ALL SHIMS ( "E ") IN PLACE, REMOVE ADJUSTING BOLT "G ", AND SET ASIDE. KEEP THE NUT 'H" SCREWED ONTO THE ADJUSTING BOLT. PLACE THE MACHINE OR EQUIPMENT ONTO TOP PLATE "A ", ALIGNING THE EQUIPMENT MOUNTING HOLE WITH THE TAPPED HOLE IN THE TOP PLATE. REATTACH THE ADJUSTING BOLT BY BOLTING THROUGH THE EQUIPMENT MOUNTING HOLE INTO THE TAPPED HOLE OF THE ( Cont.) REV. DESCRIPTION DATE BY 6. (Cont) ISOLATOR. TURN THE ADJUSTING BOLT UNTIL IT STARTS TO COMPRESS THE SPRING. LEAVE NUT "H" AT THE TOP OF THE ADJUSTING BOLT, LEAVING ROOM FOR ADJUSTING THE ISOLATOR PER STEP 9. 7. THE ADJUSTMENT PROCESS CAN ONLY BEGIN AFTER THE EQUIPMENT OR MACHINE IS AT ITS FULL OPERATING WEIGHT. 8. BACK OFF EACH OF THE (2) OR (4) LIMIT STOP LOCKNUTS ( "F ") PER ISOLATOR 1/4- TO 3/8 -INCH. 9. ADJUST EACH ISOLATOR IN SEQUENCE BY TURNING ADJUSTING BOLT(S) "G' ONE FULL CLOCKWISE TURN AT A TIME. REPEAT THIS PROCEDURE ON ALL ISOLATORS, ONE AT A TIME. CHECK THE LIMIT STOP LOCKNUTS ( "F ") PERIODICALLY TO ENSURE THAT CLEARANCE BETWEEN THE WASHER AND RUBBER GROMMET IS MAINTAINED. STOP ADJUSTMENT OF AN ISOLATOR ONLY WHEN THE TOP PLATE ( "A ") HAS RISEN JUST ABOVE THE SHIM ( "E "). 10. REMOVE ALL SPACER SHIMS ( "E "). 11. FINE ADJUST ISOLATORS TO LEVEL EQUIPMENT. 12. ADJUST ALL LIMIT STOP LOCKNUTS ( "F ") PER ISOLATOR TO OBTAIN 3/8 -INCH GAP. THE LIMIT STOP NUTS MUST BE KEPT AT THIS 3/8 -INCH GAP TO ENSURE UNIFORM BOLT LOADING DURING UPLIFT (AS IN THE CASE WHEN A COOLING TOWER IS DRAINED). 13. INSTALLATION IS COMPLETE. OTHER MATERIALS, COMPOUNDS, OR FINISHES WITH EQUAL OR SUPERIOR PROPERTIES MAY BE SUBSTITUTED AS THEY BECOME AVAILABLE. CERTIFIED FOR: JOB NAME: ARLINGTON WWTP CUSTOMER : CUMMINS NORTHWEST, LLC CUSTOMER P.O.: 129820 SALES ORDER: 219643 INSTALLATION INSTRUCTIONS SERIES MSS AND M2SS SEISMIC ISOLATORS THE VMC GROUP The Power of Together Bloomingdale, NJ 07403 Houston, TX 77041 SCALE: NONE SHEET: 2 OF 2 Member DRAWING NO.: VMA- 45307A REVISION PROPRIETARY: EXCEPT AS OTHERWISE AGREED IN WRITING, THE INFORMATION AND DESIGN DISCLOSED HEREIN ARE THE PROPERTY OF THE VMC GROUP AND MUST NOT BE COPIED OR DISTRIBUTED OUTSIDE THE VMC GROUP EXCEPT TO AUTHORIZED PERSONS WITH A GENUINE NEED TO KNOW WHO BY THE USE HEREOF ACKNOWLEDGE THE VMC GROUP'S OWNERSHIP AND AGREE TO MAINTAIN THIS INFORMATION AND DESIGN IN STRICT CONFIDENCE. • The Smart Choice for Mission - Critical Engine Starting • Fast, accurate, mission - critical charging — gives best starting reliability • Replace nearly any charger — without planning ahead • Industry -first battery -fault alarm - helps dispatch service early • 1 million hour observed MTBF — means longest charger life • Smart design — stops load dump and other damaging transients u3 S ENS l.i;dG C E —�i— Our energy weans business® www.sens- usa.com • info@sens-usa.com • Toll -free 866.736.7872 • 303.678.7500 NRG Battery Charger Benefits and Features Failure to start due to battery problems is the leading cause of inoperable engine generator sets. SENS NRG battery charger maximizes starting system reliability while slashing aenset servicing costs: One NRG replaces almost any charger without extra site visits. Installers can select or change at any time 120, 208 or 240 volts AC input, 12 or 24 -volt battery and output settings optimized for nearly any lead -acid or nickel cadmium battery. Easy to understand user interface provides state -of- the -art system status — including digital metering, NFPA 110 alarms and a battery fault alarm that can send service personnel to the site before failure to start. Batteries charged by NRG give higher performance and last longer. In uncontrolled environments precision charging by SENS increases battery life and watering intervals 400% or more. NRG meets all relevant industry standards— including UL, NFPA 110 and CE. All units are either C -UL listed or C -UL recognized. 50/60 Hz units add CE marking to UL agency marks. EnerGenius reliability technology built into every charger includes: • All- electronic operation with generous component de- rating • Disconnected /reversed /incorrect voltage battery alarm and protection • Protection of connected equipment against load dump transients • Widest temperature rating, and overtemperature protection • Superior lightning and voltage transient protection • Demonstrated field MTBF > 1 million hours • Standard 3 -year warranty and available reimbursement of customer field service costs Earn the best return on your charger investment — choose SENS NRG • • • NRG Specifications AC Input Voltage Input current Frequency Input protection 110- 120/208 -240 VAC, 110 %, single phase, switch selectable 10A charger: 6.6/3.3 amps maximum 20A charger: 12.6/6.3 amps maximum 60 Hz 15% standard; 50/60 Hz 15% optional 1 -pole fuse, soft-start, transient suppression Charger Output Nominal voltage ratings 12 or 24 volt nominal Optional voltage rating 12/24 volt, field selectable Battery settings Six discrete battery voltage programs - Low or high S.G. flooded - Low or high S.G. VRLA - Nickel cadmium 9, 10, 18, 19 or 20 cells Regulation 10.5% (1/2 %) line and load regulation Current 10 or 20 amps nominal Electronic current limit 105% rated output typical — no crank disconnect required Charge characteristic Constant voltage, current limited, 4 -rate automatic equalization Temperature compensation Enable or disable anytime, remote sensor optional Output protection Current limit, 1 -pole fuse, transient suppression Standard 4 -rate charging Fast volt limit Float volt limit a . OA m a v m Current limit Charger in "fast charge mode" Transition from current limit to fast charge voltage limit Battery current acceptance Constant current charge Transition from fast charge voltage to float voltage Charger in "float mode" High -rate Finishing Maintaining taper charge charge charge User Interface, Indication and Alarms Digital meter Switch- selectable meter for output volts, amps Accuracy 12% volts, 15% amps Alarms LED and Form C contact(s) per table: Front panel status display Alarm System Functions Alarm code "C" (meet, requirements of NFPA 110) Alarm code "1"' AC good LED LED Float mode LED LED Fast charge LED LED Temp comp active LED LED AC fail LED2 LED and Form C contact Low battery volts LED and Form C contact High battery volts LED and Form C contact Charger fail LED2 LED and Form C contact Battery fault3 LED2 LED and Form C contact 1. Alarms "1" available only on 10A charger 2. Form C contact provides summary alarm of these conditions. BBHH chargers include this alarm configuration. Contacts rated 2A @ 26 VDC resistive 3. Battery fault alarm indicates these fault conditions: - Battery disconnected - Battery polarity reversed - Mismatched charger battery voltage - Open or high resistance charger to battery connection - Open battery cell or excessive internal resistance • • • Controls AC input voltage select Optional 12/24 -volt output select Battery program select Fast charger enable /disable Temp compensation enable Remote temp comp enable Environmental Operating temperature Over temperature protection Humidity Vibration (10A unit) Transient immunity Agency Standards Safety Agency marking EMI NFPA standards Optional agency compliance Construction Housing /configuration Packaging Dimensions Printed circuit card Cooling Protection degree Damage prevention Electrical connections Warranty Standard warranty Optional warranty Field- selectable switch Field - selectable two- position jumper Field- selectable six - position jumper Field - selectable two- position jumper Standard. Can be disabled or re- enabled in the field Connect optional remote sensor to temp comp port ' I J.62/? 1-- y J i3.31J2&.621 ' 3. •3c1z 1'2. it dm Simple field adjustments -20C to +60C, meets full specification to +45C Gradual current reduction to maintain safe power device temperature 5% to 95 %, non - condensing UL 991 Class B (2G sinusoidal) ANSI /IEEE C62.41, Cat. B, EN50082 -2 heavy industrial C -UL listed to UL 1236 (required for UL 2200 gensets), CSA standard 22.2 no. 107.2 -M89 CE: 50/60 Hz units DOC to EN 60335 60 Hz: C -UL -US listed 50/60 Hz: C -UL -US listed plus CE marked FCC Part 15 Class B; EN 50081 -2 NFPA 70, NFPA 110. (NFPA 110 requires Alarms "C ") Units with Alarms "1" configuration available with additional compliance to UL category BBHH and NFPA 20 Material: Heavy clear anodized aluminum. Configuration options: • Fully enclosed: C -UL listed enclosure • Open frame: C -UL recognized • Slimline: C -UL recognized open frame construction with remote isolation transformer Open -frame and Slimline configurations only available in bulk OEM quantities and packaging See Drawings and Dimensions page for details Surface mount technology, conformal coated Natural convection Listed housing: NEMA -1 (IP20). Optional NEMA 3R enclosure Fully recessed display and controls Compression terminal blocks Three year parts and labor warranty from date of shipment If specified at time of order, warranty coverage is increased to reimburse customer's documented field service costs up to the original charger price. Contact the factory for full details Optional features Input Remote temp comp sensor Drip shield NEMA 3R housing UL BBHH listing Field service warranty Input frequency, 50/60 Hz Recommended where battery and charger are in different locations Protects from dripping water Enables outdoor installation (remote temp sensor recommended) Available in 10A units with Alarms "1" Reimbursement of customer field service expenses up to charger price • • • Drawings and Dimensions 10A Chargers < Enclosed and Open Frame Configurations Open -frame configuration omits front cover 10A Chargers Slimline Open Frame Configuration mn In Slimline can be mounted either flat or edgewise Open -frame configuration omits front cover 20A Chargers Enclosed and Open Frame Configurations Amps • Housing 'Dimensions Table Configuration Width Depth Height D. 10 Enclosed 7.66" (195 mm) 6.50" (165 mm) 12.50" (318 mm) 10 Open -frame 7.66" (195 mm) 6.50" (165 mm) 12.50" (318 mm) 10 Slimline — flat mount 7.00" (187 mm) 1.71" (43 mm) 8.78" (223 mm) 10 Slimline — edge mount 1.71" (43 mm) 7.00" (187 mm) 8.78" (223 mm) 20 Enclosed 13.93" (354 mm) 7.43" (189 mm) 13.10" (333 mm) 20 Open -frame 13.93" (354 mm) 7.43" (189 mm) 13.10" (333 mm) Output volts Output amps NRG Ordering Model Information NFPA 110 Alarms Lbs /Kg Available configurations 12 10 NRG12 -10 -R1 Enclosed, Open - frame, Slimline No 19 / 8.7 12 10 NRG12 -10 -RC Enclosed, Slimline Yes 19 / 8.7 24 10 NRG24 -10-R1 Enclosed, Open - frame, Slimline No 24/ 10.9 24 10 NRG24 -10 -RC Enclosed, Slimline Yes 24 / 10.9 12/24 10 NRG22 -10 -R1 Enclosed, Open - frame, Slimline No 24/ 10.9 D 12/24 10 NRG22 -10 -RC Enclosed, Slimline Yes 24 / 10.9 12 20 NRG12 -20 -RC Enclosed, Open -frame Yes 39/ 17.7 24 20 NRG24 -20 -RC Enclosed, Open -frame Yes 42 / 19.1 12/24 20 NRG22 -20 -RC Enclosed, Open -frame Yes 42 / 19.1 All models offer field- selectable input 120/ 208 -240 volts. 60 Hz input is standard with C -UL listing. Optional 50/60 Hz input includes C -UL listing and adds CE mark. co Model Number Breakout UL category code S: UL category BBGQ (standard) H. UL category BBHH (Alarms "1" only) Model Output voltage Output cur ent AC input 12: 12 volts 10: 10 amps R: 120/208 -240 VAC, 60 Hz 24: 24 volts 20: 20 amps H: 120/208 -240 VAC, 50/60 Hz 22: 12/24 -volt field selectable Alarm system code Housing /Agency 1: LED and single Form C contact L: Enclosed: C -UL listed C: LEDs and Form C contacts to meet R: Open - frame: C -UL NFPA 110 recognized 5: Slimline open- frame: C -UL recognized (10A only) The Smart Choice for Mission - Critical Engine Starting Additional Information Contact SENS or your local sales representative for additional specification, engineering and installation information US LISTED CE Contact Information For information and service on any SENS product, please contact us at: Sales 1.866.736.7872 • 303.678.7500 • Fax 303.678.7504 www.sens- usa.com • info @sens- usa.com 1840 Industrial Circle, Longmont, CO 80501 USA -e-SENS • STORED ENERGY SYSTEMS • Our energy means business® Battery A fully charged battery has only 40% cranking power at 0° F when compared to 100% cranking power at 80° F. IIII Heating Pads When batteries are placed in an insulated battery box, a thermostat is recommended to sense battery box temperature to prevent overheating the battery. Battery heater not recommended for nickel cadmium batteries. Standard Pad for Single Battery Special Pads for Multiple Batteries Typical Connection - 2 Batteries on Each Side of Vehicle Left Side Battery Box Right Side Battery Box Model Number Volts Watts Amps Nominal Dimensions Batt. Size Style A B >KB5015 120 50 .42 81/4 13 4D A K85015 -S 120 50 .42 81/4 13 4D B KB5015 -D 120 50 .42 81/4 13 4D C KB7515 120 75 .63 101/2 181/2 8D A KB7515 -S 120 75 .63 101/2 191/2 8D B KB7515 -D 120 15 .63 101/2 191/2 8D C KB7523 240 15 .31 101/2 181/2 8D A KB7523 -S 240 75 .31 101/2 191/2 8D B KB7523 -D 240 75 .31 101/2 191/2 8D C 100 80 m 0 o, 60 c c to U T `a) 40 m 0 c a) a) d 20 Sr SSG' ✓ ✓ ✓ i NO f go xsx we -20 Accessories For Multiple Battery Heating 2 FT 4 FT FT 8 FT EXTENSION CORDS Model Length BEC -2 BEC -4 BEC -6 BEC -8 2' 4' 6' 8' 36 3 FT 6 FT 0 +20 +40 Ambient Temperature, "F • KO POWER SUPPLY CORDS Model Length Volts BPC -31 3' 120 BPC -32 3' 240 BPC -61 6' 120 BPC -62 6' 240 Kim Hotstart Manufacturing Company, Inc. CORD.16 -3 HPN +60 +BO THERMOSTAT & "Y" CORD ASSEMBLY Model Temperature Control On Off BY -T68 60°F 80 °F P.O. Box 11245 Spokane, WA 99211 -0245 • • • INTERSTATE BATTERIES BC! Group Size 4D SUGGESTED CUSTOMER PRICES -- ALL PRICES Comparative Ratings Only C9 ¢ 0 > 12 12 QUOTES STOCK NO. (1) VOLT _59001 E t ,13 8 g "- a i M c 6 _ ARE SERVICE EXCHANGE Interstate Batteries Type 4D -XHD SAE Ratings ADJUSTMENT CCA 30 Ssec. at 0° F • 1000 Reserve Capacity(4) COMMERCIAL 295 32° F CA 1250 80° F HCA (2) 1440 Non - Commercial Commercial Months -- Cost/Mo. Months 36 Cost/Mo. 4.36 4DLT 4DLT -VHD 850 250 1065 1225 12 5988 6 -- 30 4.70 8D 8D -MHD 1400 450 1750 2015 12 59811 6 _- 36 5.28 8D 8D -XHD 1155 380 1445 1665 12 59411 6 -- 36 5.11 8D 8D -P30 1155 380 1445 1665 is 59121 6 -- 36 5.64 29H 29H -VHD 660 160 825 950 12 5965 18 _- 36 2.64 29NF 29NF -VHD 420 77 525 605 12 5974 6 -- 36 2.22 31 31 -MHD 950 195 1190 1370 12 5917 18 -- 36 3.17 31 31P-MHD 950 195 1190 1370 ® 5917 18 -- 36 3.17 31 31 -LHD 750 180 940 1080 12 5916 18 _- 36 2.86 31 31P -LHD 750 180 940 1080 12 5916 18 -- 36 2.86 31 31 -VHD 660 160 825 950 12 5965 18 -- 36 2.64 31 31 -DC 700 200 875 1010 12 5917 18 -- 36 3.17 24 C24 -XHD 575 130 720 830 12 5994 18 60 1.35 30 2.70 24F C24F -XHD 575 130 720 830 12 5994 18 60 1.35 30 2.70 27 C27 -XHD 675 160 845 970 12 5945 18 60 1.47 30 2.93 27F C27F -XHD 675 160 845 970 12 5945 18 60 1.47 30 2.93 50 C50 -XHD 600 108 750 865 ® 5917 18 60 2.00 30 4.00 65 C65 -XHD 650 115 815 935 12 5926 18 60 1.67 30 3.33 74 C74 -XHD 575 130 720 830 12 5915 18 60 1.40 30 2.80 75U C75CT -XHD 575 100 655 755 12 5925 18 60 1.42 30 2.83 78U C78DT -XHD 725 120 905 1045 in 5966 18 60 1.84 30 3.67 N100 N -100 750 180 925 1080 12 5997 6 -- 24 5.54 N120 N -120 620 240 775 840 12 59901 6 -- 24 8.29 N120 N120 800 250 975 1150 12 59131 6 -- 24 9.12 NS150 NS150 800 275 975 1150 12 59991 6 -- 24 13.93 3EE U3EE -VHD 450 100 500 575 12 5905 6 -- 30 2.83 3ET U3ET -VHD 500 140 575 660 12 5985 6 -- 30 3.26 16TF USRM -16TF 640 250 800 920 12 59501 6 -- 30 5.52 17TF U17TF -VHD 625 150 665 765 12 5947 6 -- 30 4.00 53 U53K -VHD 360 65 450 520 12 5994 6 -- 30 2.77 60K U60K -VHD 550 105 690 790 12 5985 6 -- 30 3.27 6TN U6TL 825 215 1030 1180 12 5939 6 -- 30 5.20 City of Tukwila Jim Haggerton, Mayor Department of Community Development Jack Pace, Director September 20, 2011 Dora Eisenhut Anthony Construction Company Inc. 8110 -7AveS Seattle, WA 98108 RE: Request for Extension Mechanical Permit No. M10 -111 KC Dept. of Transportation —12100 East Marginal Wy S Dear Ms. Eisenhut, This letter is in response to your written request for an extension to Permit Number M10 -111. The Building Official has reviewed your letter and considered your request to extend the above referenced permit. The City of Tukwila Building Division will be extending your permit an additional 180 days from the date of expiration, through March 15, 2012. If you should have any questions, please contact our office at (206) 431 -3670. Sincerely, fer Marshall 't Technician File: Permit No. M10 -11 l WAPermit Center\Extension Letters\Permits\2010\M10 -111 Permit Extension.doc 6300 Southcenter Boulevard, Suite #100 • Tukwila, Washington 98188 • Phone: 206 - 431 -3670 • Fax: 206 - 431 -3665 PERMIT# M10- 111 - EXTENSION REQUEST OF 180 DAYS Page 1 of 1 PERMIT# M10 -111- EXTENSION REQUEST OF 180 DAYS dora @anthonyconstruction.com Sent: Friday, September 16, 2011 9:35 AM To: Bill Rambo Good Morning Bill We are requesting an extension for Permit#A'Il0 -111 of 180 days, work has not been performed is reason we have not called for inspection/inspections. Will you be sending out the Extension Acceptance in way of letter. fnrnt? Thank You, Dora Eisenhut /President Anthony Construction Company Inc. A Minority Woman Owned Small Business Office: 206 - 762 -3780 Fax: 206 -768 -8661 Email: dorananthonvconstruction.corn 4/4, ciabirta /so delf 147)W 11 RECEIVED SEP 16 2011 PERMIT CENTER _sciip‘‘,,,,s 9,- \-7_,( fLowikkv 612166 https: / /webmail.tukwilawa. gov /owa/ ?ae= Item& t = IPM.Note &id = RgAAAACLODHcxUig... 09/16/2011 08 -01 -2011 II City of f 7'iiJCwila • Jim Haggerton, Mayor Department of Community Development Jack Pace, Director KEN EISENHUT 8110 7TH AV S SEATTLE WA 98108 RE: Permit No. M10 -111 12100 EAST MARGINAL WY S TUKW Dear Permit Holder: In reviewing our current records, the above noted permit has not received a final inspection by the City of Tukwila Building Division. Per the International Building Code, International Mechanical Code, Uniform Plumbing Code and/or the National Electric Code, every permit issued by the Building Division under the provisions of these codes shall expire by limitation and become null and void if the building or work authorized by such permit has not begun within 180 days from the issuance date of such permit, or if the building or work authorized by such permit is suspended or abandoned at any time after the work has begun for a period of 180 days. Your permit will expire on 09/17/2011. Based on the above, you are hereby advised to: 1) Call the City of Tukwila Inspection Request Line at 206 -431 -2451 to schedule for the next or final inspection. Each inspection creates a new 180 day period, , provided the inspection shows progress. -or- 2) Submit a written request for permit extension to the Permit Center at least seven (7) days before it is due to expire. Address your extension request to the Building Official and state your reason(s) for the need to extend your permit. The Building Code does allow the Building Official to approve one extension of up to 180 days. If it is determined that your extension request is granted, you will be notified by mail. In the event you do not call for an inspection and /or receive an extension prior to 09/17/2011, your permit will become null and void and any further work on the project will require a new permit and associated fees. Thank you for your cooperation in this matter. Sincerely, o o clp Bill Rambo Permit Technician File: Permit File No. M10 -111 6300 Southcenter Boulevard, Suite #100 • Tukwila, Washington 98188 • Phone: 206- 431 -3670 • Fax: 206 - 431 -3665 03 -02 -2011 • City of Tukwila • Jim Haggerton, Mayor Department of Community Development Jack Pace, Director KEN EISENHUT 8110 7TH AV S SEATTLE WA 98108 RE: Permit No. M10 -111 12100 EAST MARGINAL WY S TUKW Dear Permit Holder: In reviewing our current records, the above noted permit has not received a final inspection by the City of Tukwila Building Division. Per the International Building Code, International Mechanical Code, Uniform Plumbing Code and/or the National Electric Code, every permit issued by the Building Division under the provisions of these codes shall expire by limitation and become null and void if the building or work authorized by such permit has not begun within 180 days from the issuance date of such permit, or if the building or work authorized by such permit is suspended or abandoned at any time after the work has begun for a period of 180 days. Your permit will expire on 04/18/2011. Based on the above, you are hereby advised to: 1) Call the City of Tukwila Inspection Request Line at 206 - 431 -2451 to schedule for the next or final inspection. Each inspection creates a new 180 day period, , provided the inspection shows progress. -or- 2) Submit a written request for permit extension to the Permit Center at least seven (7) days before it is due to expire. Address your extension request to the Building Official and state your reason(s) for the need to extend your permit. The Building Code does allow the Building Official to approve one extension of up to 180 days. If it is determined that your extension request is granted, you will be notified by mail. In the event you do not call for an inspection and /or receive an extension prior to 04/18/2011, your permit will become null and void and any further work on the project will require a new permit and associated fees. Thank you for your cooperation in this matter. Sincerely, 1)••W Bill Rambo Permit Technician File: Permit File No. M10 -111 6300 Southcenter Boulevard, Suite #100 • Tukwila, Washington 98188 • Phone: 206 - 431 -3670 • Fax: 206 - 431 -3665 • «.y of 'RAJ r�la Jim Haggerton, Mayor epartment of Community Development Jack Pace, Director October 4, 2010 Ken Eisenhut 8110 7th Ave S Seattle, WA 98108 RE: Correction Letter #2 Mechanical Permit Application Number M10 -111 King County DOT —12100 East Marginal Wy S Dear Mr. Eisenhut, This letter is to inform you of corrections that must be addressed before your mechanical permit can be approved. All correction requests from each department must be addressed at the same time and reflected on your drawings. I have enclosed comments from the Building Department. At this time the Fire Department has no comments. Building Department: Allen Johannessen at 206 433 -7163 if you have questions regarding the attached memo. Please address the attached comments in an itemized format with applicable revised plans, specifications, and /or other documentation. The City requires that two (2) sets of revised plans, specifications and /or other documentation be resubmitted with the appropriate revision block. In order to better expedite your resubmittal, a `Revision Submittal Sheet' must accompany every resubmittal. I have enclosed one for your convenience. Corrections /revisions must be made in person and will not be accepted through the mail or by a messenger service. If you have any questions, please contact me at (206) 431 -3670. Sincerely, Bill Rambo Permit Technician encl File: M10 -111 W:\Permit Center \Correction Letters \2010\M10-111 Correction Letter #2.DOC 6300 Southcenter Boulevard, Suite #100 • Tukwila, Washington 98188 • Phone: 206 - 431 -3670 • Fax: 206 - 431 -3665 • Tukwila Building Division Allen Johannessen, Plan Examiner Building Division Review Memo Date: August 12, 2010 Project Name: King County Dept of Transportation Permit #: M10 -111 Plan Review: Allen Johannessen, Plans Examiner The Building Division conducted a plan review on the subject permit application. Please address the following comments in an itemized format with revised plans, specifications and /or other applicable documentation. (GENERAL NOTE) PLAN SUBMITTALS: (Min. size 11x17 to maximum size of 24x36; all sheets shall be the same size). (If applicable) Structural Drawings and structural calculations sheets shall be original signed wet stamped, not copied.) 1. Code notes shown on the new table provided including notes on cover sheet that refer to outdated 2006 building codes. These can be red lined on the plans by us if the table is in compliance with current codes. Provide us with the changed sheets or indicate the table with plan drawings and specs comply with current codes with authorization for us to update code notes on the plans and special inspection table. 2. Stationary engine generator assemblies shall meet the requirements of UL 2200. Provide manufactures installation manual with specifications for the new generator that include the reference indicating generator installation shall be in compliance with UL2200. (2009 [MC 915.1 [This is new in the 2009 IMCJ ) Should there be questions concerning the above requirements, contact the Building Division at 206 -431- 3670. No further comments at this time. 14' SfTUiL;.'ila Jim Haggerton, Mayor Department of Community Development August 18, 2010 Ken Eisenhut 8110 7th Ave S Seattle, WA 98108 RE: Correction Letter #1 Mechanical Permit Application Number M10 -111 King County DOT —12100 East Marginal Wy S Dear Mr. Eisenhut, Jack Pace, Director This letter is to inform you of corrections that must be addressed before your mechanical permit can be approved. All correction requests from each department must be addressed at the same time and reflected on your drawings. I have enclosed comments from the Building Department. At this time the Fire Department has no comments. Building Department: Allen Johannessen at 206 433 -7163 if you have questions regarding the attached memo. Please address the attached comments in an itemized format with applicable revised plans, specifications, and /or other documentation. The City requires that two (2) sets of revised plans, specifications and /or other documentation be resubmitted with the appropriate revision block. In order to better expedite your resubmittal, a `Revision Submittal Sheet' must accompany every resubmittal. I have enclosed one for your convenience. Corrections /revisions must be made in person and will not be accepted through the mail or by a messenger service. If you have any questions, please contact me at (206) 431 -3670. Sincerely, encl File: M10 -111 rshall nician ,Lau W:\Pennit Center \Correction Letters \201O'M 10 -1 I 1 Correction Letter 41.DOC 6300 Southcenter Boulevard, Suite #100 0 Tukwila, Washington 98188 0 Phone: 206 - 431 -3670 0 Fax: 206- 431 -3665 Tukwila Building Division Allen Johannessen, Plan Examiner Building Division Review Memo Project Name: King County Dept of Transportation Permit #: M10 -111 Plan Review: Allen Johannessen, Plans Examiner The Building Division conducted a plan review on the subject permit application. Please address the following comments in an itemized format with revised plans, specifications and /or other applicable documentation. (GENERAL NOTE) PLAN SUBMITTALS: (Min. size 11x17 to maximum size of 24x36; all sheets shall be the same size). (If applicable) Structural Drawings and structural calculations sheets shall be original signed wet stamped, not copied.) 1. The plan shows a new pad for the new generator. Concrete is specified between 3100 and 4500 psi. Please provide a table for all related special inspections for this generator pad. Should there be questions concerning the above requirements, contact the Building Division at 206 -431- 3670. No further comments at this time. �ERMIT COORD COO PLAN REVIEW /ROUTING SLIP ACTIVITY NUMBER: M10 -111 DATE: 07/25/11 PROJECT NAME: KING COUNTY DEPT OF TRANSPORTATION SITE ADDRESS: 16+435 • 12-100 EA41 Art/4(f WV S Original Plan Submittal Response to Correction Letter # Response to Incomplete Letter # X Revision # 1 after Permit Issued DEPARTMENT :,044 wilding Division III Public Works Au\ NA- . Fire Prevention ❑ Structural Planning Division Permit Coordinator DETERMINATION OF COMPLETENESS: (Tues., Thurs.) Complete IKI Incomplete n DUE DATE: 07/28/11 Not Applicable Comments: Permit Center Use Only INCOMPLETE LETTER MAILED: LETTER OF COMPLETENESS MAILED: Departments determined incomplete: Bldg ❑ Fire ❑ Ping ❑ PW ❑ Staff Initials: TUES/THURS ROUTING: Please Route REVIEWER'S INITIALS: DATE: Structural Review Required n No further Review Required n APPROVALS OR CORRECTIONS: Approved Notation: REVIEWER'S INITIALS: Approved with Conditions DUE DATE: 08/25/11 Not Approved (attach comments) n DATE: Permit Center Use Only CORRECTION LETTER MAILED: Departments issued corrections: Bldg ❑ Fire ❑ Ping ❑ PW ❑ Staff Initials: Documents /routing slip.doc 2-28-02 • PE NI, i PLAN REVIE • o �`U�ING SLIP ACTIVITY NUMBER: M10 -111 DATE: 10 -11 -10 PROJECT NAME: KING COUNTY DOT SITE ADDRESS: 12100 EAST MARGINAL WY S Original Plan Submittal Response to Incomplete Letter # X Response to Correction Letter # 2 Revision # After Permit Issued DEPARTM NTS: `� '� O in ivision Lim Public Works n Fire Prevention Structural Planning Division ❑ Permit Coordinator n DETERMINATION OF COMPLETENESS: (Tues., Thurs.) DUE DATE: 10-12-10 Complete Incomplete Ti Not Applicable n Comments: Permit Center Use Only INCOMPLETE LETTER MAILED: LETTER OF COMPLETENESS MAILED: Departments determined incomplete: Bldg ❑ Fire ❑ Ping ❑ PW ❑ Staff Initials: TUES/THURS ROUTING: Please Route Structural Review Required ❑ No further Review Required REVIEWER'S INITIALS: DATE: n APPROVALS OR CORRECTIONS: Approved ❑ Approved with Conditions Notation: REVIEWER'S INITIALS: DATE: DUE DATE: 11 -09 -10 Not Approved (attach comments) n Permit Center Use Only CORRECTION LETTER MAILED: Departments issued corrections: Bldg ❑ Fire ❑ Ping ❑ PW ❑ Staff Initials: Documents /routing slip.doc 2-28-02 • PE I py PLAN REVIEW /ROUTING SLIP ACTIVITY NUMBER: M10 -111 DATE: 09 -24 -10 PROJECT NAME: KING COUNTY DOT SITE ADDRESS: 12100 EAST MARGINAL WY S Original Plan Submittal Response to Incomplete Letter # X Response to Correction Letter # 1 Revision # After Permit Issued DEPARTMENTS: Building Division Public Works n Fire Prevention Structural Planning Division n Permit Coordinator DETERMINATION OF COMPLETENESS: (Tues., Thurs.) Complete Incomplete n DUE DATE: 09 -28 -10 Not Applicable Comments: Permit Center Use Only INCOMPLETE LETTER MAILED: LETTER OF COMPLETENESS MAILED: Departments determined incomplete: Bldg ❑ Fire ❑ Ping ❑ PW ❑ Staff Initials: TUES/THURS ROUTING: Please Route i1 Structural Review Required ❑ No further Review Required REVIEWER'S INITIALS: DATE: APPROVALS OR CORRECTIONS: Approved n Approved with Conditions Notation: REVIEWER'S INITIALS: DATE: DUE DATE: 10 -26 -10 Not Approved (attach comments) IK Permit Center Use Only ' CORRECTION LETTER MAILED: /4— t Departments issued corrections: Bldg Fire ❑ Ping ❑ PW ❑ Staff Initials: kiot Documents /routing slip.doc 2 -28 -02 • • PE., k4-it ,„, PY PLAN REVIEW /ROUTING SLIP ACTIVITY NUMBER: M10 -111 DATE: 08 -09 -10 PROJECT NAME: KING COUNTY DEPT OF TRANSPORTATION SITE ADDRESS: 12100 EAST MARGINAL WY S X Original Plan Submittal Response to Correction Letter # Response to Incomplete Letter # Revision # After Permit Issued DEP TMEN S: ui ding Division Public Works ❑ Fire Prevention Structural Planning Division Permit Coordinator ICJ DETERMINATION OF COMPLETENESS: (Tues., Thurs.) Complete Incomplete DUE DATE: 08-10-10 Not Applicable Comments: Permit Center Use Only INCOMPLETE LETTER MAILED: LETTER OF COMPLETENESS MAILED: Departments determined incomplete: Bldg ❑ Fire ❑ Ping ❑ PW ❑ Staff Initials: TUES/THURS ROUTING: Please Route Structural Review Required No further Review Required REVIEWER'S INITIALS: DATE: APPROVALS OR CORRECTIONS: DUE DATE: 09-07-1 Approved ❑ Approved with Conditions X Not Approved (attach comments) Notation: REVIEWER'S INITIALS: DATE: Permit Center Use Only CORRECTION LETTER MAILED: Departments issued corrections: Bldg 11 Fire ❑ Ping ❑ PW ❑ Staff Initials: Documents/routing slip.doc 2 -28 -02 PROJECT NAME: VA (.14 ���� bo -r SITE ADDRESS: 0--1Qb bt 'MA W. S PERMIT NO: • M 1 i d' ORIGINAL ISSUE DATE: 10 -)-0-1 p REVISION LOG REVISION NO. NO DATE RECEIVED STAFF INITIALS ISSUED DATE STAFF INITI S l )-S -i, ENl 8-is-c( Summary of Revision: r -ey, r R. .i ' \-e Wet I/1 d p i / '+1 Jt w) t In Summary of Revision: Received by: \Ws Gl\'ll K l"' \S fi11 hU-k- REVISION NO. DATE RECEIVED STAFF INITIALS ISSUED DATE STAFF INITIALS Summary of Revision: Received by: (please print) REVISION NO. DATE RECEIVED STAFF INITIALS ISSUED DATE STAFF INITIALS Summary of Revision: Received by: (please print) REVISION NO. DATE RECEIVED STAFF INITIALS ISSUED DATE STAFF INITIALS Summary of Revision: Received by: (please print) REVISION NO. DATE RECEIVED STAFF INITIALS ISSUED DATE STAFF INITIALS Summary of Revision: Received by: (please print) REVISION NO. DATE RECEIVED STAFF INITIALS ISSUED DATE STAFF INITIALS Summary of Revision: Received by: (please print) • • City of Tukwila Department of Community Development 6300 Southcenter Boulevard, Suite #100 Tukwila, Washington 98188 Phone: 206 - 431 -3670 Web site: http: / /www.TukwilaWA.gov REVISION SUBMITTAL Revision submittals must be submitted in person at the Permit Center. Revisions will not be accepted through the mail, fax, etc. Date: 1/2 -5"1/1 Plan Check/Permit Number: 1+91 Response to Incomplete Letter # Response to Correction Letter # Revision # 1 after Permit is Issued Revision requested by a City Building Inspector or Plans Examiner Project Name: Project Address: MTV pp rtlicwItA JUL 25 2011 f 2.1 CZ) t A'Sr f 4vec2 y 5. -1z4, ►1A- Contact Person: j<e) Phone Number: Zi::44, —1(aL— 371515 Summary of Revision: /j ,4& ,o co•v- 2-7Lcc.. 41.440 ,1 - 9e..i e.a.4 -ro Z� !. bou-6 k G4A-t( 1.0;44\ 4- 144-4' D«...2 Tn.. -a K.. Exisri•.11 41)" "l '�"o,.Kk /0 Or' *1 /o•.. X7'5 .,.. 4 Sheet Number(s): "Cloud" or highlight all areas of revision including date of revision Received at the City of Tukwila Permit Center by: Entered in Permits Plus on 01 H:\Applications\Fotms- Applications On Ltne'2010 Applications \7.2010 - Revision Submntal.doc Revised: May 2011 1 City of Tukwila Steven M Mullet, Mayor Department of Community Development 6300 Southcenter Boulevard, Suite #100 Tukwila, Washington 98188 Phone: 206 - 431 -3670 Fax: 206 - 431 -3665 Web site: http: / /www.ci.tukwila.wa.us Steve Lancaster, Director Revision submittals must be submitted in person at the Permit Center. Revisions will not be accepted through the mail, fax, etc. Date: /D! / --i'O Plan Check/Permit Number: M1 0- 1 1 1 ❑ Response to Incomplete Letter # E Response to Correction Letter # 2 El Revision # after Permit is Issued ❑ Revision requested by a City Building Inspector or Plans Examiner Project Name: King County DOT Project Address: 12100 East Marginal Wy S Contact Person: i<54„4 e u/- r Phone Number: ,__Zo(, - ZC.Z -- 37 0 Summary of Revision: ....r-,61•1_ / — 6 5 /. o/ Wiwi cooexec.rni Gods AdOTed" �l .r /fhe&s 4S •ces Zee. Z2o 0 rteceNED COW OFTUKWILA Sheet Number(s): OCT X112010 "Cloud" or highlight all areas of revision including date of revi {on Received at the City of Tukwila Permit Center by: 1:Q--- Entered in Permits Plus on 1 0----k I-1 0 PILiRMIT CENTER \applications\forms - applications on line\revision submittal Created: 8 -13 -2004 Revised: City of Tukwila Department of Community Development 6300 Southcenter Boulevard, Suite #100 Tukwila, Washington 98188 Phone: 206 - 431 -3670 Fax: 206 - 431 -3665 Web site: http://www.ci.wkwila.wa.us Revision submittals must be submitted in person at the Permit Center. Revisions will not be accepted through the mail, fax, etc. Date: 9 -21 /O Plan Check/Permit Number: M10- 1 1 1 ❑ Response to Incomplete Letter # ▪ Response to Correction Letter # 1 ❑ Revision # after Permit is Issued ❑ Revision requested by a City Building Inspector or Plans Examiner Project Name: King County DOT RECEIVED CITY OR TUKWILA ' 24 21 PERMr cE. g., Project Address: 12100 East Marginal Wy S Contact Person: •jam ET.se.0 Hw"r Phone Number: ?oL - 74 Z— 37k0 Summary of Revision: viSed aNA.,4 S1. O! 60 / iciec 7 .rote.. Gt—e —TA)ti Sheet Number(s): 'l. O/ "Cloud" or highlight all areas of revision including date of revision Received at the City of Tukwila Permit Center by: Entered in Permits Plus on 09/24d \applications \forms- applications on line\revision submittal Created: 8 -13 -2004 Revised: Contractors or Tradespeople Prater Friendly Page General /Specialty Contractor A business registered as a construction contractor with L &I to perform construction work within the scope of its specialty. A General or Specialty construction Contractor must maintain a surety bond or assignment of account and carry general liability insurance. Business and Licensing Information Name ANTHONY CONSTRUCTION CO INC UBI No. 601037129 Phone 2067623780 Status Active Address 8110 7Th Ave S License No. ANTHOCC116BT Suite /Apt. License Type Construction Contractor City Seattle Effective Date 1/30/1989 State WA Expiration Date 9/1/2011 Zip 981084374 Suspend Date County King Specialty 1 General Business Type Corporation Specialty 2 Unused Parent Company Other Associated Licenses License Name Type Specialty 1 Specialty 2 Effective Date Expiration Date Status MASSAC'122LFMASSART /ANTHONY CONSTRUCTION Construction Contractor General Unused 6/6/1988 9/1/1989 Archived MASSACI13003 MASSART CONSTRUCTION INC Construction Contractor General Unused 9/23/1987 9/1/1988 Archived MASSAIC176KD MASSART INTERNATIONAL CO, THE Construction Contractor General Unused 5/4/1983 8/1/1988 Archived Business Owner Information Name Role Effective Date Expiration Date EISENHUT, DORA President 04/07/2009 Bond Amount EISENHUT, KEN Secretary 04/07/2009 SU6741 SANDERS, GARY President 01/01/2007 04/07/2009 KWENTUS, ANN Secretary 01/01/2007 04/07/2009 ANTHONY, RLENE F Handyman 01/01/1980 08/14/2007 MAYBEE, DOUGLAS B Handyman 01/01/1980 08/14/2007 ANTHONY, ALFRED C Handyman 01/01/1980 01/01/2007 Bond Information Page 1 of 1 Bond Bond Company Name Bond Account Number Effective Date Expiration Date Cancel Date Impaired Date Bond Amount Received Date 5 TRAVELERS CAS a SURETY CO SU6741 09/01/2005 Until Cancelled $12,000.0006/09 /2005 4 ST PAUL FIRE a MARINE INS CO SU6741 09/01/2002 09/01/2005 $12,000.0008/27 /2002 Assignment of Savings Information No records found for the previous 6 year period Insurance Information Insurance Company Name Policy Number Effective Date Expiration Date Cancel Date Impaired Date Amount Received Date 18 TRAVELERS INDEMNITY CO DTC0526D63561ND08 12/08/2008 12/08/2010 $1,000,000.00 12/02/2009 17 TRAVELERS INDEMNITY CO OF AME DTC0526D63561ND07 12/08/2008 12/08/2009 $1,000,000.00 11 /24/2008 16 ALASKA NATIONAL INS CO 05LLS31514 12/08/2006 12/08/2008 $1,000,000.0012 /05/2007 https://fortress.wa.gov/lni/bbip/Print.aspx 10/20/2010