HomeMy WebLinkAboutPermit D12-309 - TERRACE APARTMENTS - BUILDING C REROOFTERRACE APARTMENTS
BLDG C
13765 56 AV S
EXPIRED
09 -28 -13
D12-309
City okukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206 -431 -3670
Inspection Request Line: 206 - 431 -2451
Web site: http: / /www.TukwilaWA.gov
DEVELOPMENT PERMIT
Parcel No.: 0003000008 Permit Number: D12-309
Address: 13765 56 AV S TUKW Issue Date: 10/01/2012
Suite No: Permit Expires On: 03/30/2013
Project Name: TERRACE APARTMENTS, BLDG C
Owner:
Name: TERRACE APTS
Address: 14240 INTERURBAN AVE S #212 , TUKWILA WA 98168
Contact Person:
Name: SCOTT PAUST
Address: PO BOX 5566 , KENT WA 98064
Contractor:
Name: ROOF TIGHT INC
Address: P 0 BOX 5566 , KENT WA 98064
Contractor License No: ROOFTI *006QA
Lender:
Name:
Address:
Phone: 206 786 -0484
Phone: 253 - 735 -2347
Expiration Date: 11/07/2013
DESCRIPTION OF WORK:
REROOF: TEAR OFF EXISTING ROOF DOWN TO 1/2" PLYWOOD SUBSTRATE, INSTALL NEW 3X3 FIBERED CANTS AS
NECESSARY, INSTALL MALARKEY #501 MODIFIED BASE SHEET, AND INSTALL POLYGLASS POLYFLEX "G" WHITE
GRANULATED APP MODIFIED BITUMEN TORCH APPLIED MEMBRANE.
Value of Construction: $52,300.00
Type of Fire Protection:
Type of Construction:
Electrical Service Provided by: SEATTLE CITY LIGHT
Fees Collected: $1,635.20
International Building Code Edition: 2009
Occupancy per IBC: 0021
* *continued on next page **
doc: IBC -7/10
D12 -309 Printed: 10 -01 -2012
Public Works Activities:
Channelization / Striping: N
Curb Cut / Access / Sidewalk / CSS: N
Fire Loop Hydrant: N Number: 0
Flood Control Zone:
Hauling: N Start Time: End Time:
Land Altering: Volumes: Cut 0 c.y. Fill 0 c.y.
Landscape Irrigation:
Moving Oversize Load: Start Time: End Time:
Size (Inches): 0
Sanitary Side Sewer:
Sewer Main Extension:
Storm Drainage:
Street Use:
Water Main Extension:
Water Meter: N
Permit Center Authorized Signature:
Private: Public:
Profit: N Non - Profit: N
Private: Public:
Date: /OA 1 // 2
I hereby certify that I have read and examined this permit and know the same to be true and correct. All provisions of law and ordinances
governing this work will be complied with, whether specified herein or not.
The granting of ermit does of presume to give authority to violate or cancel the provisions of any other state or local laws regulating
construction or th oi work. I am authorized to sign and obtain this development permit and agree to the conditions attached
to this permit.
Signature:
Print Name:
6tkice"t-
Date: [o [ IIZ.
503tr Qot u >+
This permit shall become null and void if the work is not commenced within 180 days from the date of issuance, or if the work is suspended
or abandoned for a period of 180 days from the last inspection.
PERMIT CONDITIONS:
1: ** *BUILDING DEPARTMENT CONDITIONS * **
2: No changes shall be made to the approved plans unless approved by the design professional in responsible charge and the
Building Official.
3: All permits, inspection records, and approved plans shall be at the job site and available to the inspectors prior to
start of any construction. These documents shall be maintained and made available until final inspection approval is
granted.
4: All construction shall be done in conformance with the approved plans and the requirements of the International
Building Code or International Residential Code, International Mechanical Code, Washington State Energy Code.
5: Remove all demolition rubble and loose miscellaneous material from lot or parcel of ground, properly cap the sanitary
sewer connections, and properly fill or otherwise protect all basements, cellars, septic tanks, wells, and other
excavations. Final inspection approval will be determined by the building inspector based on satisfactory completion of
this requirement.
6: Manufacturers installation instructions shall be available on the job site at the time of inspection.
doc: IBC -7/10
D12 -309 Printed: 10 -01 -2012
7: All construction noise to be in compliancSh Chapter 8.22 of the City of Tukwila Munic Code. A copy can be
obtained at City Hall in the office of the City Clerk.
8: Prior to final inspection for this building permit, a copy of the roof membrane manufacturer's warranty certificate
shall be provided to the building inspector.
9: VALIDITY OF PERMIT: The issuance or granting of a permit shall not be construed to be a permit for, or an approval of,
any violation of any of the provisions of the building code or of any other ordinances of the City of Tukwila. Permits
presuming to give authority to violate or cancel the provisions of the code or other ordinances of the City of Tulcwila
shall not be valid. The issuance of a permit based on construction documents and other data shall not prevent the
Building Official from requiring the correction of errors in the construction documents and other data.
doc: IBC -7/10
D12-309 Printed: 10 -01 -2012
CITY OF TUK,A
Community Development Department
Public. Works Department
Permit Center
6300 Southcenter Blvd., Suite 100
Tukwila, WA 98188
http://www.TukwilaWA.gov
Building Pe t No. ` L `` r?) 01
Project No.
Date Application Accepted:
Date Application Expires:
24S12
V-t. 13
(For office use only)
CONSTRUCTION PERMIT APPLICATION
Applications and plans must be complete in order to be accepted for plan review.
Applications will not be accepted through the mail or by fax.
* *Please Print **
SITE LOCATION 13765 sip Ave. S. Tukwi (a qgt The Terrace Api Bldg rrG
King Co Assessor's Tax No.:
Site Address: (37 GS $(rte Aft— S. Tu kw1
Tenant Name: VI TerrAee Af +5. gidq. "C
PROPERTY OWNER
p
Name: 5 Col" f &u St
Name: TeC { oh C,orporct4tov
Address: Po BOX SS% c
Address: 11.1240 Interurban Awe S.
City: Kevt+ State: W A
City: T o L , , , , , 114 State: W A
Zip: a8l 6$
CONTACT PERSON — person receiving all project
communication
p
Name: 5 Col" f &u St
Address: P.0 , Plox 55 vi
Address: Po BOX SS% c
Phone: 20` ?$c-0 ypy Fax:
City: Kevt+ State: W A
Zip: q70 6y
Phone: 20G- 78(o_04vi Fax:
Email: GjCo'i'f'@ roof419,4- thC. Cowl
GENERAL CONTRACTOR INFORMATION
Company Name: g00t' Tl5L + Z `A C
Address: P.0 , Plox 55 vi
City: K e„,1 T State: w h Zip: cifQ` q
Phone: 20` ?$c-0 ypy Fax:
Contr Reg No.: ROOFTIa* °Nat/1/4 Exp Date: It _1_ 13
Tukwila Business License No /
H:Wpplications\Forms- Applications On Line\2012 Applications\Permit Application Revised - 2- 7- 12.docx
Revised: February 2012
bh
Suite Number:
New Tenant:
Floor:
El Yes ❑ .. No
ARCHITECT OF RECORD
Name:
Address:
Company Name:
Architect Name:
Address:
City:
State:
Zip:
Phone:
Fax:
Email:
ENGINEER OF RECORD
Name:
Address:
Company Name:
Engineer Name:
Address:
City:
State:
Zip:
Phone:
Fax:
Email:
LENDER/BOND ISSUED (required for projects $5,000 or
greater per RCW 19.27.095)
Name:
Address:
City: State: Zip:
Page 1 of 4
BUILDING PERMIT INFORMATION-206- 431 -3670
Valuation of Project (contractor's bid price): $ 52 300 Existing Building Valuation: $
Describe the scope of work (please provide detailed information): See 41 a di ecl
Will there be new rack storage? ❑ ....Yes
[No if yes, a separate permit and plan submittal will be required.
Provide All Building Areas in Square Footage Below
PLANNING DIVISION:
Single family building footprint (area of the foundation of all structures, plus any decks over 18 inches and overhangs greater than 1.8 inches)
For an Accessory dwelling, provide the following:
Lot Area (sq ft): Floor area of principal dwelling: Floor area of accessory dwelling:
*Provide documentation that shows that the principal owner lives in one of the dwellings as his or her primary residence.
Number of Parking Stalls Provided: Standard: Compact: . . Handicap:
Will there be a change in use? ❑ Yes No If "yes ", explain:
FIRE PROTECTION/HAZARDOUS MATERIALS:
❑ Sprinklers ❑ Automatic Fire Alarm ❑ None ❑ Other (specify)
Will there be storage or use of flammable, combustible or hazardous materials in the building? ❑ Yes' ' [r No
If 'yes', attach list of materials and storage locations on a separate 8-1/2" x 11" paper including quantities and Material Safety Data Sheets.
SEPTIC SYSTEM
❑ On -site Septic System — For on -site septic system, provide 2 copies of a current septic design approved by King County Health
Department.
H:Wpplications\Forms- Applications On Line \20I2 Applications\Permit Application Revised - 2- 7- 12.docx
Revised: February 2012
bh
Page 2 of 4
- ,
Existing
.
Interior Remodel
Addition to
, . . Existing
Structure
New
Type of
Construction per
IBC
Type of
Occupancy per
IBC
1St Floor
2nd Floor
.
3rd Floor
Floors thru
Basement
Accessory Structure*
'
Attached Garage
- '
Detached Garage
.
Attached Carport
Detached Carport
Covered Deck
Uncovered Deck
PLANNING DIVISION:
Single family building footprint (area of the foundation of all structures, plus any decks over 18 inches and overhangs greater than 1.8 inches)
For an Accessory dwelling, provide the following:
Lot Area (sq ft): Floor area of principal dwelling: Floor area of accessory dwelling:
*Provide documentation that shows that the principal owner lives in one of the dwellings as his or her primary residence.
Number of Parking Stalls Provided: Standard: Compact: . . Handicap:
Will there be a change in use? ❑ Yes No If "yes ", explain:
FIRE PROTECTION/HAZARDOUS MATERIALS:
❑ Sprinklers ❑ Automatic Fire Alarm ❑ None ❑ Other (specify)
Will there be storage or use of flammable, combustible or hazardous materials in the building? ❑ Yes' ' [r No
If 'yes', attach list of materials and storage locations on a separate 8-1/2" x 11" paper including quantities and Material Safety Data Sheets.
SEPTIC SYSTEM
❑ On -site Septic System — For on -site septic system, provide 2 copies of a current septic design approved by King County Health
Department.
H:Wpplications\Forms- Applications On Line \20I2 Applications\Permit Application Revised - 2- 7- 12.docx
Revised: February 2012
bh
Page 2 of 4
PERMIT APPLICATION NOTES -
Value of Construction - In all cases, a value of construction amount should be entered by the applicant. This figure will be reviewed and is subject
to possible revision by the Permit Center to comply with current fee schedules.
Expiration of Plan Review - Applications for which no permit is issued within 180 days following the date of application shall expire by limitation.
The Building Official may grant one or more extensions of time for additional periods not exceeding 90 days each. The extension shall be
requested in writing and justifiable cause demonstrated. Section 105.3.2 International Building Code (current edition).
I HEREBY CERTIFY THAT I HAVE READ AND EXAMINED THIS APPLICATION AND KNOW THE SAME TO 13E TRUE UNDER
PENALTY OF PERJURY BY THE LAWS OF THE STATE OF WASHINGTON, AND I AM AUTHORIZED TO APPLY FOR THIS PERMIT.
BUILDING OWNER R AUTHO ED AGENT: IZ Signature: t� j� Date: 1 12.
Print Name: (,0 pewit- Day Telephone: Z 0 4;2- 7 ?6, - 0 gig
Mailing Address: I o V 0X 556(p iv K 44+ W A ! 70 6 y
City State Zip
H:\ Applications\Fotns- Applications On Line\2012 Applications\Permit Application Revised - 2- 7- 12.docx
Revised: February 2012
bh
Page 4 of 4
PUBLIC WORKS PERMIT INFTION — 206 - 433 -0179
Scope of Work (please provide detailed information):
Call before you Dig: 811
Please refer to Public Works Bulletin #1 for fees and estimate sheet.
Water District
❑ .. Tukwila ❑ ...Water District # 125
❑ .. Water Availability Provided
Sewer District ' .
❑ .. Tukwila ■ ...Valley View 0... Renton 0... Seattle
❑ .. Sewer Use Certificate ,\ ...Sewer Availability Provided
❑ ... Highline
0... Renton
Septic System:
❑ On -site Septic System — For on -si septic system, provide 2 copies of a current septic design ap r:'• ved by King County Health Department.
Submitted with Application (mark boxe which apply):
❑ .. Civil Plans (Maximum Paper Size — " x 34 ")
❑ .. Technical Information Report (Storm Dr age) ❑...Geotechnical .ort ❑ .. Traffic Impact Analysis
❑ .. Bond 0... Insurance \ . Easement(s) ❑... Maintenanc- greement(s) ❑ .. Hold Harmless — (SAO)
❑ .. Hold Harmless — (ROW)
Proposed Activities (mark boxes that apply):
❑ .. Right -of -way Use - Nonprofit for less than 72 hou
❑ .. Right -of -way Use - No Disturbance
❑ .. Construction/Excavation /Fill - Right -of -way ❑
Non Right -of -way ❑
❑ .. Total Cut
❑ .. Total Fill
t -of -way Use - Profit for less than 72 hours
❑ . fight -of -way Use — Potential Disturbance
cubic yards
cubic yards
❑... Work in Flood Zone
... Storm Drainage
❑ .. Sanitary Side Sewer 0... Ab. ' on Septic T. y:, 0... Grease Interceptor
❑ .. Cap or Remove Utilities 0...c Cut ❑... Channelization
❑ .. Frontage Improvements 0.. avement Cut 0... Trench Excavation
❑ .. Traffic Control ■ .. Looped Fire Line 0... Utility Undergrounding
❑ .. Backflow Prevention - Fire Protection
Irrigation
Domestic W -.'- r
f)
❑ .. Permanent Water Meter Size (1
❑ .. Temporary Water Meter Size
❑ .. Water Only Meter Size
❑ .. Sewer Main Extension.....' Public
❑ .. Water Main Extension. Public
FINANCE INFORMAT iN
Fire Line Size at Prop;:! Line Number of Public Fire Hydrant(s)
❑ .. Water ❑ .. Sewer ❑ .. Sewage Treatment
Monthl Servic = : illin to:
Name:
Mailing Address:
State
)f
WO # (2) " O # (3)
WO # (2) If # (3)
WO # ❑ .. Ded Water Meter Size
Private ❑
Private ❑
" WO#
" WO#
Day Telephone:
Water Meter Refund/Billing:
Name:
Mailing Address:
City
Zip
Day Telephone:
City
State Zip
H: Applications\Forms- Applications On Line'2012 Applications\Permit Application Revised - 2- 7- 12,docx
Revised: Febntary 2012
bh
Page 3 of 4
City of Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206 - 431 -3670
Fax: 206 -431 -3665
Web site: http: / /www.TukwilaWA.gov
RECEIPT
Parcel No.: 0003000008 Permit Number: D12-309
Address: 13765 56 AV S TUKW Status: PENDING
Suite No: Applied Date: 09/24/2012
Applicant: TERRACE APARTMENTS, BLDG C Issue Date:
Receipt No.: R12 -02716
Payment Amount: $992.80
Initials: JEM Payment Date: 09/27/2012 11:57 AM
User ID: 1632 Balance: $0.00
Payee: ROOF TIGHT
TRANSACTION LIST:
Type Method Descriptio Amount
Payment Check 1775 992.80
Authorization No.
ACCOUNT ITEM LIST:
Description
Account Code Current Pmts
BUILDING - RES
STATE BUILDING SURCHARGE
000.322.100 988.30
640.237.114 4.50
Total: $992.80
doc: Receipt -06 Printed: 09 -27 -2012
City of Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206 - 431 -3670
Fax: 206 - 431 -3665
Web site: http: / /www.TukwilaWA.gov
RECEIPT
Parcel No.: 0003000008 Permit Number: D12-309
Address: 13765 56 AV S TUKW Status: PENDING
Suite No: Applied Date: 09/24/2012
Applicant: TERRACE APARTMENTS, BLDG C Issue Date:
Receipt No.: R12 -02688
Payment Amount: $642.40
Initials: JEM Payment Date: 09/24/2012 01:42 PM
User ID: 1165 Balance: $992.80
Payee: ROOF TIGHT
TRANSACTION LIST:
Type Method Descriptio Amount
Payment Check 1772 642.40
Authorization No.
ACCOUNT ITEM LIST:
Description
Account Code Current Pmts
PLAN CHECK - RES
000.345.830 642.40
Total: $642.40
doc: Receipt -06 Printed: 09 -24 -2012
INSPECTION NO.
INSPECTION RECORD
Retain a copy with permit
D(2301
PERMIT NO.
CITY OF TUKWILA BUILDING DIVISION
6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431 -3670
Permit Inspection Request Line (206) 431 -2451 5'
Project:
rrU.CC-
Z�r�
P� r�
Type Inspection •
`Al p �_ Igo : la.A6
Addrew _
Date Called:
Special Instructions:
('] ` 3 e\ _
i/
�-r •-k
(
Date Wanted
2,n 1-, �a,m.
`�� p.m.
Requester:
_e
Pho h N:
j to ' 04(4
Corrections required prior to approval.
COMMENTS:
Iii„,,,,_
a,,,,,,,,k Lffi -u-- r-fl i/x-.
`.. e /4 r `Th ,U— r-9 E "-4
f
_e
Q ' <9 : ,r �s A CA-AC
T. .'1. ;-3
t
,-
1
Inspector:
Date?...
REINSPECTION FEE REQUIRED. Prior to next inspection. fee must be
paid at 6300 Southcenter Blvd.. Suite 100. Call to schedule reinspection.
INSPECTION RECORD
:Retain a copy with permit
INSPECTION Na - PERMIT NO. C.,G
CITY OF TUKWILA BUILDING DIVISION
6300 Southcenter•Blvd., #100, Tukwila. WA 98188 F. (206) 431 -3670
Permit Inspection Request Line (206) 431 -2451
Diz -3c9'
Project:
Type of Inspection:
Address: •
/37 •5'6. "v 5
Date Called:
Special Instructions:
,r 062 -7/3r- 0rao6-
Date Wanted:.
JO -2 -12
a.m.
p.m.
Requester:
Phone No:
7 ,9e -ovsy
Approved per applicable codes. ❑ Corrections required prior to approval.
COMMENTS:
K- es S >, v -am (JJ I?-sT e_A
Inspect r: •
Date:
REINSPECTION: FEE REQUIRtD. Prior to next inspection, fee must be
paid at 6300-Southcenter Blvd., Suite 100. Call to schedule reinspection.
'011-
A000Pe00Pf0n SIAT2MAUI A &0 ttetULATiNO $8W8008
POLYGLASS
&ttcti C
Owner's Name: The Terrace Apartments
Owner's Address: 13705 56th Avenue S., Tukwila, WA 98168
Building Name: The Terrace Apts., Bldg. C
Building Address: 13765 56th Avenue S, Tukwila, WA 98168
Roofing Contractor Name: Roof Tight, Inc.
Roofing Contractor Address: P. O. Box 5566, Kent, WA 98064
Roofing Contractor Phone: 253 - 735 -2347
Polyglass Product(s) Used: Polyflex G
Project Size: 13,500 Square Feet
TERMS AND CONDITIONS:
Definitions: -Polyglass' shall mean Polyglass° U.S.A., Inc. 1111 W. Newport Center Drive; Deerfield Beach, FL 33442. 'Owner' shall mean the original
party listed above as Owners Name whose building the Polyglass roof membrane product is installed.
Polyglass warrants; the Polyglass' membrane to be free from manufacturing defects which affects the ability of the product to perform in a watertight manner
(herein considered defective) for the period of Twelve (12) years from the date of original installation of the roofing membrane for all Mineral Surfaced and
Aluminum coated membranes, Smooth surfaced membranes will be limited to Ten (10) years. This warranty is for the sole benefit of Owner described above
('Owner') and is not transferrable or assignable.
12 Year
LABOR AND MATERIAL WARRANTY
No Dollar Limit
LM 2012 -12YR -143
RECEIVED
CITY OF TUKWILA
APR 2 9 2013
PERMIT CENTER
Polyglass Registered Contractor #: 1646
Roofing Specification Used: 200 -W- APP -TOR
Completion Date: October 3, 2012
Should Polyglass' undedayment be deemed defective by Polyglass, as described above, Polyglass shall exercise the option to repair or replace such
defective materials. excluding any associated labor to perform these tasks without monetary limitation; excluding all installation related labor costs; costs of
flashing, metal work, or other materials not supplied or fumished by Polyglass. Any such repair or replacement to remedy leakage shall be owner's SOLE AND
EXCLUSIVE REMEDY against Polyglass.
Polyglass shall have no obligation based upon the following exclusions under this warranty:
1) Damage by natural disasters, including but not limited to lightning, hail, gale force or other strong winds exceeding 8 on the Beaufort Scale,
goods. hurricanes, tomadoes, wind launched debris, earthquakes or similar acts of god or natural causes;
2) Damage by willful or negligent acts, fire, vandalism, or other misuse;
3) Damage by use of materials not fumished by Polyglass;
4) Owner or lessee fails to use reasonable care in maintaining and repairing the Polyglass membrane or other required components of the roofing
system.
5) Damage by structural failure, Including, without limitation, settling or shifting of the building. or movement, cracking, or deflection of the roof deck,
roof substrate. root insulation, building design or construction, inadequate attic ventilation;
6) Damage by any chemical condition not disclosed to Polyglass. or traffic or storage of matenals or infiltration of condensation or moisture in,
through or around the walls, coping, building structure of the underlying or surrounding areas;
7) Alterations or repairs made on or through the roof or objects (Including, without limitation, machines, structures, fixtures. or utilities) are placed on
the root without prior written authorization of Polyglass;
8) Metal work or other materials not fumished by Polyglass and used in the roofing system resulting in leaks;
9) Poor workmanship in the application of materials as determined in Polyglass' sole judgment;
10) Failure to utilize Polyglass' latest instructions and recommendations as to installation procedures;
11) Damage resulting from lack of positive, proper or adequate drainage;
12) Loss in part or in whole of granule or other surfacing;
13) Damage or injury arising in any way from an actual or alleged discharge or release of any pollutant or waste, environmental or airbome
contaminates;
14) Damage or injury arising in any way from testing /sampling of undedayment, design and consulting errors or omissions.
In addition to items 1-14 above, owner agrees that Polyglass shall have no responsibility whatsoever for bodily injury to any person or damage to the
structure or its contents directly or indirectly arising out of any defects in its roof undedayment or any other consequential or incidental damages or attorneys fees
Polyglass' sole responsibility is the repair or replacement of defective underlayment membrane that is directly related to leakage. This warranty does not include
the cost of removal of existing, or the cost of labor to repair or replace the defective undedayment and/or roofing covering /system installed to the Polyglass
undedayment.
Claim Procedure:
Polyglass shall have no obligation under this warranty unless Owner snail nave promptly notified Polyglass in writing to Polyglass by registered or certified
mail. Direct all claims to Polyglass, U.S.A., Inc. 1 1 11 W. Newport Center Drive; Deerfield Beach, FL 33442, ATTN: Warranty Department. Any claim shall
provide a copy of warranty and detailed information of the leakage and alleged defect, Polyglass must receive such notice within ten (10) days after discovery of
the claimed defect.
Owner shall provide Polyglass, and its agents and employees, free and reasonable access to the roof during regular business hours during the term of the
warranty. Owner shall be responsible for all costs related to safe and reasonable access to investigate claim.
Polyglass' good -faith determination of the source of leakage. damage. or alleged defect to the roof shall be exclusive and binding to owner.
Polyglass' failure at any time to enforce any of the terms and conditions of this warranty shall not be construed as a waiver of such provisions.
Polyglass reserves the right to discontinue or modify any of its products and shall not be liable to Owner as a result of any such discontinuance or
modification.
THIS WARRANTY SUPERCEDES AND IS IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT
LIMITATION, WARRANTIES OF MERCHANTABLILITY AND FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY SHALL BE OWNER'S EXCLUSIVE
REMEDY AGAINST POLYGLASS OR ITS AFFILIATES, AND NEITHER POLYGLASS NOR ITS AFFILIATES SHALL BE LIABLE FOR ANY CONSEQUENTIAL
OR INCINDENTAL DAMAGES. POLYGLASS' AGENTS HAVE NO AUTHORITY TO GIVE WARRANTIES BEYOND THOSE PROVIDED IN THS
WARRANTY.ALL RIGHTS AND DUTIES ARISING UNDER THIS WARRANTY SHALL BE GOVERNED BY FLORIDA LAW.
Warranty presented and determined as incomplete or inaccurate shall be considered null and void.
April 2011
Building Owner Roof Maintenance Warranty Guidelines
MAINTENANCE AND CARE FOR YOUR POLYGLASS ROOF MEMBRANE
To avoid interruption and /or cancellation of your warranty coverage, the following Maintenance
Program is a requirement.
There are various items associated with your roof system that are NOT covered under the warranty.
Some can have a direct impact on the performance, life cycle and watertight integrity of the roofing system. It is
the responsibility of the Owner to regularly maintain these. As the Owner, a file of records should be maintained
related to all roof and roof -top associated activities. Such file should contain the original warranty, invoices
related to the original roof installation, repair invoices, a log of roof inspections and any roof -top activities such as
service to roof top mechanical units. Polyglass strongly recommends the Owner institute a roof log for all parties
accessing the roof, regardless of who or the purpose, that they are required to sign. This protects you, the owner,
from 1) unwanted roof traffic and 2) any damage caused can, many times, be traced back to the responsible
party.
The roof should have a visual inspection at a minimum rate of two (2) times per year by a qualified
professional. Many Polyglass Registered Contractors offer this service for a nominal fee. Inspections are
generally recommended in the spring and fall. It is a good practice to have the roofs inspected after severe
weather conditions such as: hail, strong winds, hurricanes, blizzards, ice storms, etc. Proper precautions should
be followed during inspections to prevent against trip /fall accidents.
Guidelines For Roof Inspection & Generalized Remedial Repairs
1. Remove debris, such as, leaves, twigs, branches, dirt, rocks, bottles, trash, etc., that has accumulated.
2. Clean gutters, down spouts, drains and scuppers. Make sure water freely flows from the roof. No
standing water should remain on the roof surface within 48 hours after the last precipitation.
3. Examine all metal flashing areas for rusting or damage that may have been caused by traffic, wind, hail,
snow, ice, etc. All damaged, loose, or poorly sealed materials must be repaired by an authorized roofing
contractor approved for repair work to POLYGLASS® Roofing Membranes.
4. All exposed mastics and sealants regardless of purpose or function are required maintenance items to be
remediated by the Owner, including pitch pan and metal flashing sealants.
5. Examine all adjacent areas to the roof, parapet walls and adjoining structures. Damage to items such as
masonry, failing mortar joints, loose or missing sealants, loose stone stone /tile, loose and improperly
sealed counterflashing, etc. often causes leaks that are inadvertently blamed on the roofing system and
not provided for by the warranty. Not only does this cost the roofing manufacturer time in the
investigation of problems not associated with the roofing membrane; it costs the Owner time and money.
Many roofing manufacturers, including POLYGLASS ®, will back charge an Owner for the time spent to
investigate non roof related problems. These items need to be repaired by the properly trained personnel
to avoid any unnecessary charges or voiding of warranty coverage. Unauthorized repairs to the roof will
void warranty coverage.
6. Granule loss of mineral surface membranes is typical and not a manufacturing defect. In cases of
granule loss that becomes more noticeable, additional surfacing should be applied as directed by
POLYGLASS ®.
7. When repairing items to the roofing membrane, associated items, or building structure, be sure to use
precaution and properly protect the roofing surface from damage.
8. Examine roof top equipment, air condition units, condensers, exhaust fans, antennas and other roof top
items for damage. Check for leaking oil, damaged flashings or loose parts /equipment that could cause
puncture damage to the roofing membranes. All units shall be checked to assure they are sound,
watertight and not be displaced by wind events.
9. Check the building for excessive movement or settlement. Improper placement or omission or needed
expansion joints could cause splits or stress in the roofing material /system, drastically reducing the life
cycle of the roofing system.
10. All work directly or indirectly related to the roofing system where the roofing material needs to be
repaired, i.e. new curbs, units, exhaust fans, antenna installation, repairs, etc., must be accomplished by
a current POLYGLASS® Registered Contractor. Failure of the Owner to utilize an authorized applicator
will result in immediate termination of the warranty
11 Conditions beyond those noted herein above should be provided to POLYGLASS® in writing within 15
days of discovery for recommendations.
!I
REVIEWED FO—R-1 COMPLIANCE
APPROVED
SEP 2 6 2012
City of T
BUILDING
i
z50
v -
L 3
REVISIONS
No changes shall be made to the scope
of work without prior approval of
Tukwila Building Division.
NOTE: Revisions will require a new plan submittal
and may include additional plan review fees
z
J
3
)31.
E V eA+ Cvril 5
LevE
dry '���
~c c4O Y
Permit flo. D12 3(7
Plan review approval is subject to errors and omissions.
kr,7 oval of construction documents does not authorize
tnE violation of 'i y : • IA (:,s code or ordinance. Receipt
of approved `' ` is acknowledged:
City Of Tukwila
BUILDING DMSION
kwila
IVISION
cmRO M
LA
SEP 2 4 2012
PERMIT CENFER
Ci
11
0
•
twInt
REVIEWED FOR
CODE COMPLIANCE
APPROVED
SEP 2 6 2012
City of Tukwila
nIVISION
Proposal Submitted to:
Tecton Corporation
Job Name:
The Terrace Apartments
e:=
08/21/12
Street Address:
14240 Interurban Ave S #212
Job Description:
Roof Replacement
Bid #
15 -08 -12
City, Sate, Zip
Tukwila, WA 98168
Location:
13705 56th Ave S Tukwila, WA
Quantity:
13,700sf
Attention:
Mike Jansen
Phone: 206-448-4100 I
Fax 206- 448 -4777
Source
Rpt.
Scope of Work
1) A "Honey Bucket" portable toilet will be on location for our workers during this
project.
2) Remove existing cap metal flashings and haul away in preparation for new.
3) Tearoff and remove all the existing roof coverings down to the 1/2" plywood
substrate. Set any protruding fasteners and sweep roof clean and dry as required.
During the removal process, the substrate is to be inspected for structural
soundness. Any extra labor connected with repair work will be charged on a time
($57.50 per hour) and materials basis. Plywood replacement will be billed at
$52.00 per sheet of 1/2" 4'x8' CDX plywood; Plywood replacement billing rates
include labor, materials, hauling and disposal fees. Note: we replaced 238 sheets
on the 13725 building back in 2009.
4) Provide and install new 3x3 fibered cants as necessary at all vertical roof -to -wall
and straight curb penetrations and transitions.
5) Mechanically Fasten Malarkey #501 modified base sheet with 2 "side laps and
6" end laps directly to the substrate and extend up all cant strips at least 2"
6) Provide and install Polyglass Polyflex "G" White Granulated APP Modified
Bitumen torch applied membrane over the roofing area consistent with the
manufacturer's standard specifications. WARRANTV:12 -year on Labor and
12 -year on Material according to the manufacturer's written warranty.
7) Prime coat all wall surfaces in preparation for the self adhered base sheet and
torch membrane. CITY
SEP 2 4 2012
PO. Box 5566 • Kent, WA 98064 -5566
1.3)
(425) 917 -2020 • (206) 786 -4412 • Fax (253) 735 -2348
Contractor's License: ROOFTI *006QA
PERMIT CENTER
_31
INC.
8) Install Elastoflex SAV self adhered SBS base sheet over all walls. Mechanically
fasten with simplex roofing nails for extra holding strength to make sure the torch
membrane stays perfectly in place without sagging.
9) Provide and install at the parapet walls and /or similar vertical surfaces, where
required the torch applied flashing membrane consistent with manufacturer's
specifications.
10) Membrane Flash Curbs, roof edges and other roof transitions where required.
This means that the edges will have a double layer at all bends.
11) Provide and install new lead pipe jacks and lead caps before the flashing
according to the manufacturer's specifications.
12) Provide and install white aluminum turbine roof vents. Diameter 12" at throat,
The flanged flat base is to be membrane flashed into the roofing system or box
curb mounted and membrane flashed in according to the job requirements. (44 -
each turbine fans to be installed)
13) Remove existing deck mounted roof vents and save. At vent opening construct a
wood 2x8 curb with a 2x2 cant at the base. Base and membrane flash the new
curbing, then replace the roof vents with new on the raised curbs using screws for
attachment. Note: It is important to make sure that all bath fans and dryer lines
are vented out the roof surface and not into the rafter or attic cavity.
14) All existing down drop scuppers will be removed and discarded. New sheet metal
down drop scuppers will be installed according to the manufacturer's
specifications.
15) Any additional drainage revisions including new drains, adding slop and
downspouts to relieve standing water conditions will be an extra to this contract
on a time & materials basis.
16) Any ventilation improvements required in the rafter cavities will be corrected on a
T & M basis. Whether or not more ventilation is required on this building will be
determined by the condition of the plywood deck when the old roof is removed.
Note: we added 13 each ventilation platforms 10' long to the 13725 building
back in 2009 for a cost of $8,125 + tax.
17) Termination bar metal will be installed where required to make a watertight
condition per the manufacturer's warranty specifications.
18) Install new prefinished Brown 24 -gauge galvanized perimeter edge metal.
PO. Box 5566 • Kent, WA 98064 -5566
(425) 917 -2020 • (206) 786 -4412 • Fax (253) 735 -2348
Contractor's License: ROOFTI *006QA
19) Composition Sloped Sections:
20) Tear off and remove the composition layer down to the wood sheathing. Set any
protruding fasteners and sweep roof clean and dry as required. Haul debris away.
21) Install over the entire roof area 1 -layer of 30# ASTM asphalt saturated felt under -
lavment. The felt is to be installed shingle fashion starting at the lower edge to of
the roof and lapping over each other 2" on the upper edge and 6" on ends.
22) Provide and install according to the manufacturer's specifications, Pabco Premier
fiberglass shingles UL Class "A" fire rated. Warranty: Limited Lifetime
consistent with the manufacturer's standard form and 10 -year labor by Roof
Tight. Color: Weathered White
23) Install new starter and bleeder strips as per manufacturer's specifications.
24) At ridge, replace the ridge vent with new PVC nail on ridge venting and cover
with ridge material according to the manufacturer's specifications.
25) Install new hip and ridge shingles at all required locations.
26) Install 1 1/2"x 1 1/2" in stretch dimension, pre - painted (baked on enamel). 26 -gauge
Galvanized gable end (rake) metal. Color: Brown
27) Install new gutter edge metal prefinished (baked on enamel), 26- gauge. Color:
Brown.
28) Contractors during the execution of this contract will at all times operate in a safe
and organized manner keeping all tools, equipment and vehicles in designated
work area. The job site will be swept and kept clean of debris during working
hours and prior to daily work completion.
In consideration for providing all equipment. labor and materials here in the described,
complete in accordance with above specifications, for the contract sum of:
$52,300 + 9.5% sales tax
Payment Terms:
40% down payment
60% upon completion
PO. Box 5566 • Kent, WA 98064 -5566
(425) 917 -2020 • (206) 786 -4412 • Fax (253) 735 -2348
Contractor's License: ROOFTI *006QA
FILE COPY
PO LYG LASS® prBCP E-
PRODUCT DESCRIPTION
Polygloss G2 Base is a premium, inorganic fiberglass mat reinforced base sheet
which has been saturated and coated with a weathering grade asphalt. The top
surface is then coated with a fine mineral parting agent to prevent sticLing in the roll
Designed as an ideal first roofing ply in SBS /APP modified or Built Up roofing systems,
this wrinkle resistant easy roofing membrane can be installed over a variety substrates.
USES
• Specially designed as o base layer in hot mop, cold applied and mechanically-
attached applications
FEATURES AND BENEFITS
• Strong, resilient base sheet with exceptional nail holding performance and
puncture resistance
• Wrinkle resistant; will lay flat for easy install
• Consistent thickness on both sides eliminates pinholes preventing asphalt
bleed through
TECHNICAL DESCRIPTION
kTESTMETHOD PROPERTY/
ASTM 4601
ASTM 4601
ASTM 4601
Mass of Desaturoted Glass Mar
Surfacing and stabilizer, max
Moss of Asphalt Coating
ASTM 4601, Type II
Breaking strength @ 77 °F /longitudinal and
transverse)
PICAL
ALUE'
1 7 Ibs / 100 ft2
65
7.0 Ibs/ 100 ft2
44 lb It /in
Copynghl 02011 by Polygloss U A in( and all righrs ore ■eser.rd
Edition Dote: 08/11 • Doc# Polyglots G2 Base
PRODUCT DATA
Coverage 1Nornoall
Weigh) IApproxl
Roll Size. . .
Rolls /Pollct
REVIEWED COMPLIANCE
APPROVED CE
SEP 2 6 2012
City of BUILDING Tukwila VISION
300 sq ft
72 Ibs
. 108' x 36"
16
APPLICABLE STANDARDS
• ASTM D 4601 Tyne II
• UL Classified for use in class A, B or C
roofs as listed in the latest UL "Roofing
Materials and Systems Directory-
•
IDI
a (L e: (1'
PRODUCT WARRANTY
Polygloss USA, Inc commercial roofing membranes
can be backed will inonufacturer's warranty for
m to 20 years when used m port of on approved
multi-ply looting system °lease see you, Polygloss
USA Inc. Soles or -ethical Representative for
specrl colons and details.
tt ATP:1000'01r, 11ATAEIALF AFU n., <L LATIAl', SS.+TFAI9
MADE!
1- 800 - 222 -9782
www.polyglass.com
n
S1-1) 7 42012
PERMIT CENSER
P2o1
POLYGLASS® G2 BASE
APPLICATION INSTRUCTIONS
Polyglass G2 Base is intended to be used as o base sheet in new or re -roof applications Polyglass G2 Base may be applied
directly to non combustible substrates. Polyglass G2 Base requires the installation of a compatible granulated cap sheet to
complete the roofing system.
• Apply over clean, dry, dust and debris -free substrates. Prime concrete decks prior to application with PG 100
Asphalt Primer.
• When re- roofing, remove all prior roofing materials down to a clean debris -free substrate and properly close -off
all abandoned roof penetrations.
• Concrete or steel decks shall be designed with proper expansion devices_
• Wood decks shall have all joints blocked and properly supported.
• Ensure the fire rating of the assembly over any combustible substrate.
• Ensure the installation of Polyglass G2 Base does not prevent the ventilation of existing construction
• Do not apply over shingles or any granulated surface.
• While installing Polygloss G2 Bose:
1. Start at the low point of the roof.
2. Unroll the material and allow to relax.
3. Position successive rolls providing a minimum 6" end lap and 3" side lap.
• Polyglass G2 Base can be used as a base sheet in flashing applications. Check project details for proper installation requirements.
• Engineered to be used in BUR construction of roofs.
POLYGLASS U.S.A., INC. MANUFACTURING FACILITIES
• Fernley, NV
• Hazleton, PA
• Winter Haven, FL
CORPORATE HEADQUARTERS
Polyglass U.S.A , Inc.
1 1 1 1 West Newport Center Drive
Deerfield Beach, Fl 33442
www. Polyg lass . corn
General Line: (888) 410-1375
(954) 233 -1330
Customer Service: (800) 222 -9782
Technicol Service: (866) 802 -8017
Questions? technical @polyglass.com
Product Disclaimer. Unless otherwise incorporated into or part of a supplemental manufacturer's warranty, Polyglass warrants its product(s)
against manufacturing defects in Its product that duectly results in leokoge for a period of 2 years
Refer to material safety data sheet (MSDS) for specific data and handling of our products. All
data furnished refers to standard production and is given in good faith within the applicable
manufacturing and testing tolerances.
Polyglass U.S.A., Inc., reserves the right to improve and change its products at any time with-
out prior notice. Polygloss U.S.A., Inc. cannot be held responsible for the use of its products
under conditions beyond its own control.
For most current product data and warranty information, visit www.polyglass.com
WATERPROOFING MATENIALE AND INSULATING SYSTEMS
OR OUP
s ✓aeae /
1- 800 - 222 -9782
www.polyglass.com
Amy eoo f r►t� keot , rep/ co./
leaf/ 4, /NJ, lecele./ w /
POLYFLEX® G
PRODUCT DESCRIPTION
PIE C
Polyflex G membranes are premium, polyester reinforced APP .,. ifiedlitgilumen roofing Nitkir
membranes specially designed for heat- welded applications. Mvprremium
Atactic Polypropylene resins, and incorporating syearior polyester reinforcing, Polyflex & -
provides an exceptionally durable roofing product, which is easy to install and will
provide long -term weathering performance.
With a granulated surface (available in several colors) and either a polyolefin
or sand backing, Polyflex G exceeds all minimum ASTM standards for tensile
strength, puncture resistance and flexibility.
Polyflex G membranes can also be used as flashing membranes in all applicable
specifications, in accordance with recommended installation practices.
USES
• Heat - welded or cold - applied cap sheet
• Applied directly over an acceptable substrate or as part of a multi -ply system
• New roofing, re- roofing, re -cover and for flashing details
FEATURES AND BENEFITS
• Exceptional weathering characteristics
• Puncture and tear resistant
• Low-temp flexibility, exceptional tensile strength and elongation properties
TECHNICAL DESCRIPTION
TEST METHOD
PROPERTY
TYPICAL
VALUE
ASTM D5147
Thickness, typical mm (mils)
4.5 (180)
ASTM D5147
Peak load C 23 + / -2C 173.4 + /- 3.6F), MD
and XMD, min, kN /m (Ibf /in.)
8.8 (50)
ASTM 05147
Elongation @ 23 + / -2C (73.4 + /- 3.6F), MD
and XMD, min (%)
23
ASTM 05147
Tear Strength @ 23 + / -2C (73.4 + /- 3,6F),
mm, N Obi)
3 I 1 (701
ASTM D5147
Low Temperature Flexibility max. C (F)
0 (32)
ASTM D5147
Granule Embedment, g
2
AVAILABLE COLORS
Top surface granule protection is available in a variety of colors such as:
Black Buff Chestnut Grev Slate Oak
White Red Blend Pine Green Heather Blend Weatherwood
10/2010
PRODUCT DATA
Coverage (Approx)
weigh
Roll Size 3210 x 39 ' /y"
Rolls /Pallet
REVIEWED FOR
CODE COMPLIANCE
APPROVED
SEP 2 6 2012
City of Tukwila
BUILDING DIVISION
100sgft
110 lbs
tlOmx lm)
20
APPLICABLE STANDARDS
• ASTM 0 6222 Type i
• Miami Dode Code Compliance
• acColy Mutual Approved
• UL Classified for use in class A, Bar C
roofs, as listed in the latest 01 "Roofing
Materials and Systems Directory"
• ICC ESR 2018
• TDI
PRODUCT WARRANTY
Unless otherwise incorporated into or part of a
supplemental manufacturer's warranty, Polygloss
warrants its product(s) for a period of 10 years
against manufacturing defects in its product that
directly results in leakage. Warranty coverage
s an annually declinng pro -rated warranty.
ROS INn MATERIALS AND INSULATING SYSTEMS
L
LYGLASS
MAPS!
/ e& t/
1- 800 - 222 -9782
www.polyglass.com crry
SEP 2 4 2012
IPERMIT CEli1ER ....
I. • • PROD
POLYFLEX° G
APPLICATION INSTRUCTIONS
Polyflex G is intended to be used as the primary weathering surface in new or re -roof applications. Polyflex G is to be applied
as the outermost layer of a multi -ply roof system over o compatible Polyglass base or inner ply sheet. Polyflex G may be applied
directly to non-combustible substrates.
• Apply over clean, dry, dust and debris -free substrates. Prime concrete decks prior to application with PG 100
Asphalt Primer.
• When re- roofing, remove all prior roofing materials down to a clean debris -free substrate and properly close -off all
abandoned roof penetrations
• Concrete or steel decks shall be designed with proper expansion devices.
• Wood decks shall have all joints blocked and properly supported.
• Ensure the fire rating of the assembly over any combustible substrate.
• Ensure the installation of Polyflex G does not prevent the ventilation of existing construction.
• Do not apply over shingles or any granulated surface.
• While installing Polyflex G:
1. Start at the low point of the roof.
2. Unroll the material and allow to relax in the sun for at least 15 minutes.
3. Install with traditional torch roofing techniques ensuring proper heating of the roofing material as not to expose
the reinforcement.
4. Do not heat the substrate.
5. Position successive rolls providing o minimum 6" end lap and 3" side lap. Asphalt bleed out shall be 1/4" to
3/8" on all seams.
6. Laps shall be rolled with a 6" -wide roller immediately after heat welding.
• Details and flashing may be installed using Polyflex G with torch applied techniques. Do not use cold adhesives or hot
asphalt. Check project details for proper installation requirements.
MANUFACTURING FACILITIES
• Fernley, NV
• Hazleton, PA
• Winter Haven, FL
AU DATA PURNIS140 WM TO STANDARD PRODUCTION AND IS GIVEN IN GOOD FMO WTTNIN THE APPUCARLS MANUFACTURING AND NSTING TOLERANCtS.
POLYGLASS USA, INC.. PASSIVES TIN SIGNE TO AARON AND CHANGE RS PRODUCTS AT ANY TIME WITNOUT PRIOR NOMIC5. POLTGLASS USA. INC. CANNOT Y ONO
EFSPONSWE FOR TIN USE OF ITS PRODUCTS UNDER CONOITIONS RAYONS, ITS OWN CONTROL.
LWATERPROOFING MATERIALS AND INSULATING SYSTEMS
immino
POLYGLASS
12, MAPET
Afdlir 41446/
1 -800- 222 -9782
www.polyglass.com
08 -01 -2013
SCOTT PAUST
PO BOX 5566
KENT WA 98064
City of Tukwila
Jim I-Ialggerton, ll'Iayor
Department of Community Development Jack Pace. Director
RE: Permit No. D12 -309
TERRACE APARTMENTS, BLDG C
13765 56 AV S TUKW
Dear Permit Holder:
In reviewing our current records, the above noted permit has not received a final inspection by the City of Tukwila Building
Division. Per the International Building Code, International Mechanical Code, Uniform Plumbing Code and/or the National
Electric Code, every permit issued by the Building Division under the provisions of these codes shall expire by limitation and
become null and void if the building or work authorized by such permit has not begun within 180 days from the issuance date
of such permit, or if the building or work authorized by such permit is suspended or abandoned at any time after the work has
begun for a period of 180 days. Your permit will expire on 09/28/2013.
Based on the above, you are hereby advised to:
1) Call the City of Tukwila Inspection Request Line at 206 -431 -2451 to schedule for the next or final inspection.
Each inspection creates a new 180 day period, provided the inspection shows progress.
-or-
2) Submit a written request for permit extension to the Permit Center at least seven (7) days before it is due to
expire. Address your extension request to the Building Official and state your reason(s) for the need to extend
your permit.
The Building Code does allow the Building Official to approve one extension of up to 180 days. If it is determined that your
extension request is granted, you will be notified by mail.
In the event you do not call for an inspection and/or receive an extension prior to 09/28/2013, your permit will become null
and void and any further work on the project will require a new permit and associated fees.
Thank you for your cooperation in this matter.
Sincerely,
Bill Rambo
Permit Technician
File: Permit File No. D12 -309
6300 Southcenter Boulevard. Suite 4100 • Tukwila. Washington 98188 • Phone 206- 431 -3670 • Frcz 206 -431 -3665
03 -05 -2013
SCOTT PAUST
PO BOX 5566
KENT WA 98064
City of Tukwila
Department of Community Development
RE: Permit No. D12 -309
TERRACE APARTMENTS, BLDG C
13765 56 AV S TUKW
Dear Permit Holder:
Jim Haggerton, Mayor
Jack Pace, Director
In reviewing our current records, the above noted permit has not received a final inspection by the City of Tukwila Building
Division. Per the International Building Code, International Mechanical Code, Uniform Plumbing Code and /or the National
Electric Code, every permit issued by the Building Division under the provisions of these codes shall expire by limitation and
become null and void if the building or work authorized by such permit has not begun within 180 days from the issuance date
of such permit, or if the building or work authorized by such permit is suspended or abandoned at any time after the work has
begun for a period of 180 days. Your permit will expire on 04/01/2013.
Based on the above, you are hereby advised to:
1) Call the City of Tukwila Inspection Request Line at 206 - 431 -2451 to schedule for the next or final inspection.
Each inspection creates a new 180 day period, provided the inspection shows progress.
-or-
2) Submit a written request for permit extension to the Permit Center at least seven (7) days before it is due to
expire. Address your extension request to the Building Official and state your reason(s) for the need to extend
your permit.
The Building Code does allow the Building Official to approve one extension of up to 180 days. If it is determined that your
extension request is granted, you will be notified by mail.
In the event you do not call for an inspection and/or receive an extension prior to 04/01/2013, your permit will become null
and void and any further work on the project will require a new permit and associated fees.
Thank you for your cooperation in this matter.
Sincerely,
r Marshall
Technician
File: Permit File No. D12 -309
6300 Southcenter Boulevard, Suite #100 • Tukwila, Washington 98188 • Phone 206-431-3670 • Fax 206-431 -3665
OPERiVlIT COORD COPT
PLAN REVIEW /ROUTING SLIP
ACTIVITY NUMBER: D12 -309 DATE: 09/24/12
PROJECT NAME: TERRACE APARTMENTS, BLDG C
SITE ADDRESS: 13765 56 AV S
X Original Plan Submittal
Response to Correction Letter #
Response to Incomplete Letter #
Revision # after Permit Issued
DEPARTMENTS:
AV(' A I✓Io,
II ing Division n
Public Works
AWI /111 -
Fire Prevention
Planning Division
❑ Structural ❑ Permit Coordinator ❑
DETERMINATION OF COMPLETENESS: (Tues., Thurs.)
Complete
Incomplete ❑
DUE DATE: 09/25/12
Not Applicable ❑
Comments:
Permit Center Use Only
INCOMPLETE LETTER MAILED: LETTER OF COMPLETENESS MAILED:
Departments determined incomplete: Bldg ❑ Fire ❑ Ping ❑ PW ❑ Staff Initials:
TUES /THURS ROUTING:
Please Route Structural Review Required n
REVIEWER'S INITIALS: DATE:
No further Review Required n
APPROVALS OR CORRECTIONS:
DUE DATE: 10/23/12
Approved n Approved with Conditions tEr Not Approved (attach comments) ❑
Notation:
REVIEWER'S INITIALS:
DATE:
Permit Center Use Only
CORRECTION LETTER MAILED:
Departments issued corrections: Bldg ❑ Fire ❑ Ping ❑ PW ❑ Staff Initials:
Contractors or Tradespeople Peer Friendly Page
•
General /Specialty Contractor
A business registered as a construction contractor with L &I to perform construction work within the scope of
its specialty. A General or Specialty construction Contractor must maintain a surety bond or assignment of
account and carry general liability insurance.
Business and Licensing Information
Name ROOF TIGHT INC UBI No. 601988145
Phone 2537352347 Status Active
Address Po Box 5566 License No. ROOFTI'006QA
Suite /Apt. License Type Construction Contractor
City Kent Effective Date 11/1/2000
State WA Expiration Date 11/7/2013
Zip 980645566 Suspend Date
County King Specialty 1 General
Business Type Corporation Specialty 2 Unused
Parent Company
Business Owner Information
Name
Role
Effective Date
Expiration Date
PAUST, SCOTT
01/01/1980
Bond Information
Page 1 of 1
Bond
Bond Company Name
Bond Account Number
Effective Date
Expiration Date
Cancel Date
Impaired Date
Bond Amount
Received Date
3
American Contractors
Indem CO
100141377
11/01/2010
Until Cancelled
$12,000.0010/13
/2010
2
CBIC
SD2984
11/01/2001
Until Cancelled
11/01/2010
$12,000.00
10/18/2001
Assignment of Savings Information No records found for the previous 6 year period
Insurance Information
Insurance
Company Name
Policy Number
Effective Date
Expiration Date
Cancel Date
Impaired Date
Amount
Received Date
15
Kinsale
Insurance
Company
0100001668 -1
03/03/2012
03/03/2013
$1,000,000.0003
/02/2012
14
KINSALE INS CO
00099939
03/03/2011
03/03/2012
$1,000,000.0003
/02/2011
13
CENTURY
SURETY CO
CCP640688
03/03/2010
03/03/2011
$1,000,000.0003
/02/2010
12
CENTURY
SURETY CO
CCP588263
03/03/2009
03/03/2011
$1,000,000.0003
/01/2010
11
CENTURY
SURETY CO
2131604B
03/03/2009
03/03/2010
$1,000,000.00
02/27/2009
10
FIRST MERCURY
INS CO
FMWA000073
03/03/2008
03/03/2009
$1,000,000.0003
/05/2008
9
FIRST MERCURY
INS CO
FMFL002574
03/03/2007
03/03/2009
$1,000,000.00
02/15/2008
8
BURLINGTON
INS CO
HGL0012240
03/03/2007
03/03/2008
$1,000,000.0002
/28/2007
7
BURLINGTON
INS CO
HGL0009215
03/03/2005
03/03/2007
$1,000,000.0003
/01/2006
Summons /Complaint Information No unsatisfied complaints on file within prior 6 year period
Warrant Information No unsatisfied warrants on file within prior 6 year period
Infractions /Citations Information No records found for the previous 6 year period
https: // fortress .wa.gov /lni/bbip/Print.aspx
10/01/2012