Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
Permit D13-088 - TERRACE APARTMENTS - BUILDING A - REROOF
TERRACE APARTMENTS BUILDING A 13705 56 AV S D13-088 City oftukwila • Department of Community Development 6300 Southcenter Boulevard, Suite #100 Tukwila, Washington 98188 Phone: 206-431-3670 Inspection Request Line: 206-431-2451 Web site: htto://www.TukwilaWA.gov DEVELOPMENT PERMIT Parcel No.: 0003000008 Address: 13705 56 AV S TUKW Suite No: Project Name: TERRACE APARTMENTS, BLDG A Permit Number: D13-088 Issue Date: 03/25/2013 Permit Expires On: 09/21/2013 Owner: Name: TERRACE APTS Address: 14240 INTERURBAN AVE S #212 , TUKWILA WA 98168 Contact Person: Name: SCOTT PAUST Address: PO BOX 5566 , KENT WA 98064 Contractor: Name: ROOF TIGHT INC Address: P 0 BOX 5566 , KENT WA 98064 Contractor License No: ROOFTI*006QA Lender: Name: Address: SELF FUNDED - TERRACE APARTMENTS Phone: 206-786-0484 Phone: 253-735-2347 Expiration Date: 11/07/2013 DESCRIPTION OF WORK: TORCH DOWN REROOF Value of Construction: $52,300.00 Fees Collected: $1,635.20 Type of Fire Protection: International Building Code Edition: 2009 Type of Construction: V -B Occupancy per IBC: 0021 Electrical Service Provided by: SEATTLE CITY LIGHT **continued on next page** doc: IBC -7/10 D13-088 Printed: 03-25-2013 Public Works Activities: Channelization / Striping: N Curb Cut / Access / Sidewalk / CSS: N Fire Loop Hydrant: Flood Control Zone: Hauling: N Start Time: End Time: Land Altering: Volumes: Cut 0 c.y. Fill 0 c.y. Landscape Irrigation: Moving Oversize Load: Start Time: End Time: N Number: 0 Size (Inches): 0 Sanitary Side Sewer: Sewer Main Extension: Private: Public: Storm Drainage: Street Use: Profit: N Non -Profit: N Water Main Extension: Private: Public: Water Meter: N Permit Center Authorized Signature: Date: `)—S ` 1 I hereby certify that I have read and examined this permit and know the same to be true and correct. All provisions of law and ordinances governing this work will be complied with, whether specified herein or not. The granting of this permit does not presume to give authority to violate or cancel the provisions of any other state or local laws regulating construction or the pi ormance,,oiwork. I am authorized to sign and obtain this development permit and agree to the conditions attached to this permit. Signature: Print Name: Pa. 5 d" Date: 3 2-5/1 This permit shall become null and void if the work is not commenced within 180 days from the date of issuance, or if the work is suspended or abandoned for a period of 180 days from the last inspection. PERMIT CONDITIONS: 1: ***BUILDING DEPARTMENT CONDITIONS*** 2: No changes shall be made to the approved plans unless approved by the design professional in responsible charge and the Building Official. 3: All permits, inspection records, and approved plans shall be at the job site and available to the inspectors prior to start of any construction. These documents shall be maintained and made available until final inspection approval is granted. 4: All construction shall be done in conformance with the approved plans and the requirements of the International Building Code or International Residential Code, International Mechanical Code, Washington State Energy Code. 5: Remove all demolition rubble and loose miscellaneous material from lot or parcel of ground, properly cap the sanitary sewer connections, and properly fill or otherwise protect all basements, cellars, septic tanks, wells, and other excavations. Final inspection approval will be determined by the building inspector based on satisfactory completion of this requirement. 6: Manufacturers installation instructions shall be available on the job site at the time of inspection. doc: IBC -7/10 D13-088 Printed: 03-25-2013 7: Prior to final inspection for this building Alit, a copy of the roof membrane manufactur warranty certificate shall be provided to the building inspector. 8: VALIDITY OF PERMIT: The issuance or granting of a permit shall not be construed to be a permit for, or an approval of, any violation of any of the provisions of the building code or of any other ordinances of the City of Tulcwila. Permits presuming to give authority to violate or cancel the provisions of the code or other ordinances of the City of Tukwila shall not be valid. The issuance of a permit based on construction documents and other data shall not prevent the Building Official from requiring the correction of errors in the construction documents and other data. 9: ***FIRE DEPARTMENT CONDITIONS*** 10: The attached set of building plans have been reviewed by the Fire Prevention Bureau and are acceptable with the following concerns: 11: Application of roof coverings with the use of an open -flame devices requires a separate permit from the Tulcwila Fire Department located at 444 Andover Park East, Tukwila, Washington, 98188; telephone - (206)575-4407. There shall be not less than one multi-purpose portable fire extinguisher with a minimum 2-A 20-B:C rating on the roof being covered or repaired. (IFC 105.6.24, 1417.3) 12: Contact The Tukwila Fire Prevention Bureau to witness all required inspections and tests. (City Ordinances #2327 and #2328) 13: Any overlooked hazardous condition and/or violation of the adopted Fire or Building Codes does not imply approval of such condition or violation. 14: These plans were reviewed by Inspector 511. If you have any questions, please call Tukwila Fire Prevention Bureau at (206)575-4407. doc: IBC -7/10 D13-088 Printed: 03-25-2013 • CITY OF TUKi" Community Development Department Public Works Department Permit Center 6300 Southcenter Blvd., Suite 100 Tukwila, WA 98188 http://www.TukwilaWA,gov Building Per. _At No. -- 0 0 Project No. Date Application Accepted: —13 7 Date Application Expires: of -t ( 3 (For office use only) CONSTRUCTION PERMIT APPLICATION Applications and plans must be complete in order to be accepted for plan review. Applications will not be accepted through the mail or by fax. **Please Print** SITE LOCATION Site Address: 13705 5(,t Ave., 5 . - BL4 . A Tenant Name: Ttie Terrace. Aparkntcn+S PROPERTY OWNER Name: me_ Terrace Ap*r{ en+S Address: 13105 560 Avc.. 5. City: Tvkwt LA State: to Zip: clf 16g CONTACT PERSON — person receiving all project communication Name: Scot PA v 5+ — Roof Tt L+ J Address: po 80X 5.56(.. City: Kc.K4„ State: wk Zip: as6Gy Phone: 204 -714 -Mg Fax: Email: roof -r tq%►+ti qvto.l 1 . tom lv►O GENERAL CONTRACTOR INFORMATION Company Name: Rome T'! l k+ 1 rn Address: Pt o , go x 55" D City: KGvtL State: W A Zip: wag l _T Phone: Z0& .m_O t{' y Fax: Contr Reg No.: ROOFTi it' 0064,A Exp Date: Tukwila Business License No.: H:' pplications\Forms-Applications On Line \2012 Applications\Permit Application Revised - 2-7-12.docx Revised: February 2012 bh King Co Assessor's Tax No.: Suite Number: Floor: New Tenant: ❑ Yes ❑ .. No ARCHITECT OF RECORD Name: ` p 5e (F,, t'v 144. 1 roped OW eve r Company Name: N I A City: State: Zip: Architect Name: Address: City: State: Zip: Phone: Fax: Email: ENGINEER OF RECORD Name: ` p 5e (F,, t'v 144. 1 roped OW eve r Company Name: N ( A City: State: Zip: Engineer Name: Address: City: State: Zip: Phone: Fax: Email: LENDER/BOND ISSUED (required for projects $5,000 or greater per RCM/ 19.27.095) Name: ` p 5e (F,, t'v 144. 1 roped OW eve r Address: City: State: Zip: Page 1 of 4 Valuation of Project (contractor's bid price): $ 521300 n �� ) Describe the scope of work (please provide detailed information): De+ k i 5Go p e o w or le a,� q, 4or new rota 1"19 Existing Building Valuation: $ Will there be new rack storage? ❑ ....Yes ❑ ..No If yes, a separate permit and plan submittal will be required. Provide Building Areas.in Square Footage Below PLANNING DIVISION: Single family building footprint (area of the foundation of all structures, plus any decks over 18 inches and overhangs greateethan 18'inches) *For an Accessory dwelling, provide the following: Lot Area (sq ft): Floor area of principal dwelling: Floor area of accessory dwelling: *Provide documentation that shows that the principal owner lives in one of the dwellings as -his or her primary.residence. Number of Parking Stalls Provided: Standard: Compact: .Handicap: Will there be a change in use? 0 Yes 0 No If"yes", explain: FIRE PROTECTION/HAZARDOUS MATERIALS: 0 • Sprinklers 0 Automatic Fire Alarm 0 None 0 Other (specify) �i " Will there be storage or use of flammable, combustible or hazardous materials in the building? . "❑ ''Yes 0 No If "yes', attach list of materials and storage locations on a separate 8-1/2" .x 11" paper including quantities and Material Safety Data Sheets. SEPTIC SYSTEM ❑ On-site Septic System — For on-site septic system, provide 2 copies of a current septic design approved by King County Health Department. H:\Applications\Forms-Applications On Line\2012 Applications\Permit Application Revised - 2-7-12.docx Revised: February 2012 bh Page 2 of 4 1 Existing Interior Remodel Addition to, : Existing Structure New Type of ... Construction per. IBC •.. •Type of: Occupancy per ; IBC :15t Floor 22 Floor .. . .. 3`d Floor Floors . tlim'. .' Basement Accessory Structure* Attached Garage , Detached Garage Attached Carport Detached Carport , Covered. Deck ' Uncovered Deck"• PLANNING DIVISION: Single family building footprint (area of the foundation of all structures, plus any decks over 18 inches and overhangs greateethan 18'inches) *For an Accessory dwelling, provide the following: Lot Area (sq ft): Floor area of principal dwelling: Floor area of accessory dwelling: *Provide documentation that shows that the principal owner lives in one of the dwellings as -his or her primary.residence. Number of Parking Stalls Provided: Standard: Compact: .Handicap: Will there be a change in use? 0 Yes 0 No If"yes", explain: FIRE PROTECTION/HAZARDOUS MATERIALS: 0 • Sprinklers 0 Automatic Fire Alarm 0 None 0 Other (specify) �i " Will there be storage or use of flammable, combustible or hazardous materials in the building? . "❑ ''Yes 0 No If "yes', attach list of materials and storage locations on a separate 8-1/2" .x 11" paper including quantities and Material Safety Data Sheets. SEPTIC SYSTEM ❑ On-site Septic System — For on-site septic system, provide 2 copies of a current septic design approved by King County Health Department. H:\Applications\Forms-Applications On Line\2012 Applications\Permit Application Revised - 2-7-12.docx Revised: February 2012 bh Page 2 of 4 1 •r PERMIT APPLICATION NOTES — Value of Construction — In all cases, a value of construction amount should be entered by the applicant. This figure will be reviewed and is subject to possible revision by the Permit Center to comply with current fee schedules. Expiration of PIan.Review — Applications for which no permit is issued within 180 days following the date of application shall expire by limitation. The Building Official may grant one or more extensions of time for additional periods not exceeding 90 days each. The extension shall be requested in writing and justifiable cause demonstrated. Section 105.3.2 International Building Code (current edition). I HEREBY CERTIFY THAT I HAVE READ AND EXAMINED THIS APPLICATION AND KNOW THE SAME TO BE TRUE UNDER PENALTY OF PERJURY BY THE LAWS OF THE STATE OF WASHINGTON, AND I AM AUTHORIZED TO APPLY FOR THIS PERMIT. BUILDING OWNERRoA.41.1H1/4IZGENT: Signature:444— Print Name: S Ott Pewsf Mailing Address: L`0 Iteot' 1 1Q4T' Rot Box 5344 H:Wpplications\Forms-Applications On Line \20I2 Apphcations\Permit Application Revised - 2-7-12.docx Revised: February 2012 bh Day Telephone: City Date: 3'13113 ZoG=181,- ot{8v State 98041 Zip Page 4 of 4 1 • City of Tukwila Department of Community Development 6300 Southcenter Boulevard, Suite #100 Tukwila, Washington 98188 Phone: 206-431-3670 Fax: 206-431-3665 Web site: http://www.TukwilaWA.gov RECEIPT Parcel No.: 0003000008 Permit Number: D13-088 Address: 13705 56 AV S TUKW Status: PENDING Suite No: Applied Date: 03/13/2013 Applicant: TERRACE APARTMENTS, BLDG A Issue Date: Receipt No.: R13-01020 Initials: User ID: WER 1655 Payment Amount: $1,635.20 Payment Date: 03/13/2013 09:46 AM Balance: $0.00 Payee: ROOF TIGHT TRANSACTION LIST: Type Method Descriptio Amount Payment Check 1925 1,635.20 Authorization No. ACCOUNT ITEM LIST: Description Account Code Current Pmts BUILDING - RES PLAN CHECK - RES STATE BUILDING SURCHARGE 000.322.100 000.345.830 640.237.114 Total: $1,635.20 988.30 642.40 4.50 rinn• Denninl_11L: Drint * (14_14_9MQ 4e:i4 INSPECTION NW INSPECTION RECORD Retain a copy with permit 14° PERMIT NO. �. CITY OF TUKWILA BUILDING DIVISION 6300 Southcenter Blvd., #100, Tukwila. WA 98188 le_ (206) 431-3670 Permit Inspection Request Line (206) 431-2451 ProJgctt: / p �/� q Type nspection ‘ f Address:l< 13. 139 6S S-(0 Ad e Date Called: Special Instructions: / kk Date Wanted: —8..., r 13 a.m. Requester: Phone No,: - 0 Y1 Approved per applicable codes. Corrections required prior to approval. i COMMENTS: D- t- cCX 1 IIJs.p�ector: iVA/\ n REINSPECTION FEE REQUIRED. Prior�to next inspection. fee must be paid at 6300 Southcentd. Blvd.. Suite 100. Calf to schedule reinspection. Date... INSPECTION RECORD Retain a copy with permit INSPECTION NO. PERMIT NO. CITY OF TUKWILA BUILDING DIVISION C� 6300 5outhcenter Blvd., #100, Tukwila. WA 98188 (206) 431-3670 Permit Inspection Request Line (206) 431-2451 12 Proje t _ fo( ,_..-- Type qf Ionspe tion:.., —11 j_ f �, Addres:_ (-...s105 o AVE. Date Called: Special Instructions: / Date Wanted:._ —13a.m. p.m. ,1. Requester: Phot g No —7g-(0, 04 rl, Approved per applicable codes. Corrections required prior to approval. COMMENTS: Inspect: OA ,, � ice► Date: AN REINSPECTION FEE REQUIRED. Prior to next inspection. fee'must be paid at 6300 Southcenter Blvd.. Suite 100. Call to schedule reinspection. INSPECTION RECORD Retain a copy with permit (3-0,Y8 INSPECTION NO. - PERMIT NO. CITY OF TUKWILA BUILDING DIVISION - 6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431-3670 Permit Inspection Request Line (206) 431-2451 Project: , ,�t " a 3�:.r(, �,- Type f Inspection: ' c�D >1A-ekt 't �� . ,( 6tc ce ,r- Address: 43 1OS -5- !IA AVE Date Called: Special Instructions: - Date Wanted: ? a.m. 4 -- 24, — � ..3 ,pT Requester: Phone No: �( j� Q 2ip6 '2",-0`*Cl4 JApproved:per,applicable codes. ElCorrections required prior to approval. COMMENTS: D iA- Inspecto 00-4 AA 0 Date 2/ \ Y -I REINSPECTION FEE REQUIRED. Farior to next inspection, fee must be paid at 6300 Southcenter Blvd., Suite 100. Call to schedule reinspection. INSPECTION RECORD Retain a copy with permit INSPECTION NO. PERMIT NO. CITY OF TUKWILA BUILDING DIVISION 6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431-3670 Permit Inspection Request Line (206) 431-2451 Pro ( t jAir. ed A1 Type K—o ion e A Address:r 13"1 D 5 (h AVE- Date Called: Special Instructions: Date Wanted:. ry ? ra�,m�, lr3 "' .13 .4 Requester: Phoge,No:( _78..4_ __ 6.4 s,..1 Approved per applicable codes. OCorrections required prior to approval. COMMENTS: C e,t) r el' s 6 3 v (6 r? /1 t)Viv Date;( 13 n REINSPECTION FEE REQUIRED. Prior to next inspection. fee must be paid at 6300 Southcenter Blvd., Suite 100. Call to schedule reinspection. 4 INSPECTION RECORD Retain a copy with permit INSPECTION NO. ' PERMIT NO. CITY OF TUKWILA BUILDING DIVISION 6300 Southcenter Blvd., #100, Tukwila. WA 98188 1Z (206) 431-367C Permit Inspection Request Line (206) 431-2451 Di 3 -O'8 Project/: r �q .._[.,, L - rektil((. ivl s Type f Inspection:S( . A 6, �� l� t Address: �, dc, -t,, 1 9 D C _S (n AVE-- Date Called: Special Instructions: Date Wanted --2Z- ^ 1 3 a.m. Requester: Phone N' ! - 10 aerael Approved per applicable codes. Corrections required prior to approval. COMMENTS: Pc - \r/ 'l P-, ki r``"1 (0 - i Inspectt Date: REINSPECTION FEE REQUIRED. Prior to next inspection. fee must be paid at 6300 Southcenter Blvd., Suite 100. Call to schedule reinspection. INSPECTION NO. INSPECTION RECORD Retain a copy with permit PERMIT NO. CITY OF TUKWILA BUILDING DIVISION • . 6300 Southcenter Blvd_, #100, Tukwila: WA 98188 (206) 431-367 Permit Inspection Request Line (206) 431-2451 Project: /� Ao,u Type f Inspection:„„r cA t :.1 Address: $. q OS f T.:.cDate . •(i Called: Special Instructions: . ` Date Wanted ( "". `. a:m. „p.m, Requester: Phone No: ZD Cv 7.7s.„(10— 6'41 Approved per applicable codes. ElCorrections required prior to approval. COMMENTS: GA eS -' A It Inspect A j1 Date: 4 ___.t :.1 ........./ - j n REINSPECTION FEE REQUIRED. Prior to next inspection, fee must be-,;. paid at 6300 Southcenter Blvd., Suite 100. Call to schedule reinspection. INSPECTION RECORD Retain a copy with permit INSPECTION NO. PERMIT NO. CITY OF TUKWILA BUILDING DIVISION G� 6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431-3670 Permit Inspection Request Line (206) 431-2451 Project: ‘--M..1 1 t(L-E— -1,P ._.._ ,(‘ Type of Inspection: o-(:;" C AJ Address: u 131 OS S6 A(ii Date Called: ,-, Special Instructions: • Date Wanted:. ( a.m. Requester: Phone No: ElApproved per applicable codes. El Corrections required prior to approval. COMMENTS:Pi+ ,f.-(A4.J-t-f ( A P_ Inspecto Date: ! ` 3 � r I I REINSPECTION FEE REQUIRED. Prior to next inspection, fee must be paid at 6300 Southcenter Blvd., Suite 100. Call to schedule reinspection. 4P) INSPECTION RECORD Retain a copy with permit INSPECTION NO. PERMIT NO. CITY OF TUKWILA BUILDING DIVISION 6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431-367 Permit Inspection Request Line (206) 431-2451 r"' Project: "—..-- TUT -A Ce /�•(.! (. Ty e^of Insp ction:.1 1' Dor 5 L . 'A‘ ... Address— ' " rt, . 8 3'70 S cf4 AVS'. Date Called: . Special Instructions: :r \-kf r Date Wanted: / �. !' a.rr :p.m: Requester: Phne Nos ❑ Approved per applicable codes. Corrections required prior to approval. COMMENTS: Insrctor: Date: '_ ( n REINSPECTION FEE REQUIRED. Prior to next inspection: fee -must be paid at 6300 Southcenter Blvd., Suite 100. Call to schedule reinspection`. 4,6 INSPECTION NO. INSPECTION RECORD Retain a copy with permit ()t3 ogis PERMIT NO.- CITY OF TUKWILA BUILDING DIVISION L 6300 Southcenter Blvd., #100, Tukwila. WA 98188 } (206) 431-367 Permit Inspection Request Line (206) 431-2451 Pr2 t: k t yr AtP hAt s Type f Inspe ion ,.` !..-0o - s -e, rte:. Address: f 13145 S0 A 6, Date Called: . Special Instructions: Date Wanted:. - '..-1 fiam. p.m. Requester: Phon No:, Approved per applicable codes. Corrections required prior to approval. `7 COMMENTS: I f Inspector: °-k-Yj n I Date:;' n REINSPECTION FEE REQUIRED. Prior to next inspection;: fee mustbe paid at 6300 Southcenter Blvd., Suite 100. Call' to schedute;reinspection. 45 - INSPECTION RECORD Retain a copy with permit INSPECTION NO. PERMIT NO. s / CITY OF TUKWILA BUILDING DIVISION 6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431-3670 Permit Inspection Request Line (206) 431-2451 _013 -0er Project:�-- -frk ' f},� (. Type f Inspection: ', � 6 "r" s Address: 131 a2 5 j� ,1 Co' 1P Date Called: Special Instructions: Q `` Date Wanted:. - - Cr a�.m_;, -7 r1 3 P.m. Requester: Phone No: /' (n a' (t)r°"4,ket ElApproved per applicable codes. Corrections required prior to approval. -• COMMENTS: 11 .) —f kt_.s" 0 Ate_ (A -le e 1J6 fr Inspect:— L Date . 3 ri REINSPECTION FEE REQUIRED. Prior to next inspection, fee must be paid at 6300 Southcenter Blvd., Suite 100. Call to schedule reinspection. INSPECTION RECORD Retain a copy with permit INSPECTION NO. PERMIT NO. .CITY OF TUKWILA BUILDING DIVISION G "if 6300,Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431-3670 Permit Inspection Request Line (206) 431-2451 D 13—o gg ------ Type of Inspection:V -- Pre_- 14 Rwje0:_ 1 r Address:`Yc 13 9 0 5 - S -((0A-- Date Called: Special Instructions:. if �� a6:. ' ` Date Wanted:. a� I f Requester:. Pho1,1261o: (0-1 i((.0 --&t Y'el- a'Approved per applicable codes. EJCorrections required prior to approval. COMMENTS 5t. .Ske c- OK 6-0.iLi Inspector: Date.4 . REINSPECTION FEE REQUIRED. Priorto next inspection. fee must be paid.at 6300 Southcenter Blvd., Suite 100. Call to schedule reinspection. -*L-3 INSPECTION RECORD Retain a copy with permit INSPECTION NO. PERMIT NO. (206) 431-3670 .D13-Ot8 CITY OF TUKWILA BUILDING DIVISION 6300 Southcenter Blvd., #100, Tukwila. WA 98188 Permit Inspection Request Line (206) 431-2451 �j It t t &c ` M/ . i (itt-Q1lr Type o Inspection• ,, (� ,, rr e..., — ��-�"„ � Ad; rags fl 0.-C! Date Called: e" ----.....Special Instructions aJ • ' 0'' , ..e. I i C• n '6 /`t J -( Date Date Wanted:. ax.. .3-2A -(3 p.m. Requester: Phone Na 2/0 (.0 --7S('‘, --- 0 4?-ef .o` Approved per applicable codes. EJCorrections required prior to approval. COMMENTS: r Nyr - St r Inspector: \' Date: n REINSPECTION FEE REQUIRED. Prior to next inspection, fee must be paid at 6300 Southcenter Blvd., Suite 100. Call to 'schedule reinspection. INSPECTION NO. INSPECTION RECORD Retain a copy with permit 13 oa b PERMIT NO. CITY OF TUKWILA BUILDING DIVISION 6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431-3670 Permit Inspection Request Line (206) 431-2451 t P.LQI ECC �r Ae � Approved TYPrrp,of I. p— �tl .e. `� Q r A / A((Acef Address-__ 0.5l I 'D / "?"� {►` �r ID _H / — Date Called: Special Instructions: t -PC.. ` A r /'t Date Wanted3—/s,-, /7 �mr 1!1 m. Requester: Ph�reikto ..1Z„ --/E--(.0 212- Approved per applicable codes. • Corrections required prior to approval. /C COMMENTS: 404 n ,,.5 S0 CCS al.4.-4 '/ ✓{ / jj 4 t h L, Inspector: REINSPECTION FEE REQ IRED. Prior to next inspection, fee must be paid at 6300 Southcenter Blvd.. Suite 100. Call to schedule reinspection. INSPECTION NO. CITY OF TUKWILA BUILDING DIVISION 6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431-3670 Permit Inspection Request Line (206) 431-2451 INSPECTION RECORD Retain a copy with permit ,D1.3 -OW PERMIT NO Project: App(. Typ of Inspection: f re / e CSP l { 0-C- C.Qe S , - 01 c. C C irtA‘f- -F J CP Address: ' `it i 3'1 O S 5 t -f%L( L. Date Called: 'i' -use J A4 o A e.JL J A,(,Ju}A 4 Special Instructions: A�Cr"4" gU1c Date Wanted.. 3i2:1rr ./am . pmm Requester: t '' `'`' Phone No: /� ' Jjse EJApproved per applicable codes. Corrections required prior to approval. COMMENTS: (34. `"� Ki ft o A(\(-/ ._-- P; v o uT f 0 AA LA 60 AIk e2 I F.-. ~, �_ -' l { 0-C- C.Qe S , - 01 c. C C irtA‘f- -i-1-1-t nive.:(14 J As .,-�-c-e-ATA 4 01-7-1)r T u .n A t\, -L 7 ie(v-AJ/Nes/ii._ -- 'i' -use J A4 o A e.JL J A,(,Ju}A 4 S e _.AAF C-_. 01-" , C (k ,.e_ Pry ' i -D AS- --f t 6J`ov., r- ti- <4 S 4i 4 . s'; C`3 h.! 0 T :,) .r' t"U 6:A-11 .‘./4 J A- ,k) v 4J` , J Pet);'-:' d ,71 —I- , -)14.1.1 ti Cr AJ 1�(3 / - (A)aI le--- le-- Inspector: PIU Date 71 , 13 REINSPECTION FEE REQUIRED. Prior to next inspection, fee must be paid at 6300 Southcenter Blvd., Suite 100. Call to schedule reinspection. • INSPECTION RECORD ?�•r.. Retain a copy with permit D/3-0ga INSPECTION NO. PERMIT NO. CITY OF TUKWILA BUILDING DIVISION 6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431-3670 Permit Inspection Request Line (206) 431-2451 Project Type of Inspection: • �1!/J Address: c.--, s4. Atd_S ate ailed: f ., ,.1(AA ,� 4.1.e yAr I 1[ `iL. ,..:,,J1, e '_' „C -V .r<70 Special Instructions: . Date Wanted:. / —43 a.m. Wm Requester: w f / r-(i—rte4 t.,". /?, ... /= ' ,/ize ,...,1 ! .Alt,- �f� / Phone No: % Approved per applicable codes. Corrections required prior to approval. COMMENTS: / .t e1✓[. lJA/�. f ey' ._,,e_ c r./.iJ rn..i.0 ff C4 114(//, %-1., iz., S ,I-,,, / l j 6 O /t 7 ,e....ye [ I /e,..0 /--/a /.r / sd �1!/J _ -f es. A I59 l ..-'e5i-e--` .- ,94_444.,,..; //p , ..r f ., ,.1(AA ,� 4.1.e yAr I 1[ `iL. ,..:,,J1, e '_' „C -V w ,414-,L 4. h -..,-&--0.,-;e Cc' e_.1:.1 T4 is a -fry s .0-, 3_,A_ .17% e z�r 4, 7.44.... -' R.c,z`-C C �G?,.� w f / r-(i—rte4 t.,". /?, ... /= ' ,/ize ,...,1 ! .Alt,- �f� / t\ 1 Date: 3......21A5 Irl! CIIV El REIN PECTION FEE IfiQUIRED. Prior to next inspection, fee must be paid at 6300 Southcenter Blvd., Suite 100. Call to schedule reinspection. Owner's Name: The Terrace Apartments Owner's Address: 13705 56th Ave. S., Tukwila, WA 98168 Building Name: The Terrace Apts./Bidg. "A" an Carports Building Address: 13705 56th Ave. S., Tukwila, WA 98168 Roofing Contractor Name: Roof Tight, Inc. Roofing Contractor Address: P. O. Box 5566, Kent, WA 98064 Roofing Contractor Phone: 253-735-2347 Polyglass Product(s) Used: Polyflex G White Project Size: 13,500 SQ. FT. + 7,500 SQ. FT. (carports) 12 Year LABOR AND MATERIAL WARRANTY No Dollar Limit LM 2013-12YR-056 D Polyglass Registered Contractor #: 1646 Roofing Specification Used: 200 -W -APP -TOR Completion Date: April 25, 2013 TERMS AND CONDITIONS: Definitions: 'Polyglass" shall mean Polyglass® U.S.A., Inc. 1111 W. Newport Center Drive; Deerfield Beach, FL 33442. 'Owner" shall mean the original party listed above as Owner's Name whose building the Polyglass roof membrane product is installed. Polyglass warrants; the Polygtass' membrane to be free from manufacturing defects which affects the ability of the product to perform in a watertight manner (herein considered defective) for the period of Twelve (12) years from the date of original installation of the roofing membrane for all Mineral Surfaced and Aluminum coated membranes, Smooth surfaced membranes will be limited to Ten (10) years. This warranty is for the sole benefit of Owner described above ('Owner) and is not transferrable or assignable. Should Polyglass' underiayment be deemed defective by Polyglass, as described above, Polyglass shall exercise the option to repair or replace such defective materials, excluding any associated labor to perform these tasks without monetary limitation; excluding all installation related labor costs; costs of flashing, metal work, or other materials not supplied or fumished by Polyglass. Any such repair or replacement to remedy leakage shall be owner's SOLE AND EXCLUSIVE REMEDY against Polyglass. Polyglass shall have no obligation based upon the following exclusions under this warranty: 1) Damage by natural disasters, including but not limited to lightning, hail, gale force or other strong winds exceeding 8 on the Beaufort Scale, floods, hurricanes, tomadoes, wind launched debris, earthquakes or similar acts of god or natural causes; 2) Damage by willful or negligent acts, fire, vandalism, or other misuse; 3) Damage by use of materials not fumished by Polyglass; 4) Owner or lessee fails to use reasonable care in maintaining and repairing the Polyglass membrane or other required components of the roofing system. 5) Damage by structural failure, including, without limitation, settling or shifting of the building, or movement, cracking, or deflection of the roof deck, roof substrate, roof insulation, building design or construction, inadequate attic ventilation; 6) Damage by any chemical condition not disclosed to Polyglass, or traffic or storage of materials or infiltration of condensation or moisture in, through or around the walls, coping, building structure ,.f the underlying or surrounding areas: 7) Alterations or repairs made on or through the roof dr objects (including, without limitation, machines, structures, fixtures, or utilities) are placed on the roof without prior written authorization of Polyglass, 8) Metal work or other materials not furnished by Polyglass and used in the roofing system resulting in leaks; 9) Poor workmanship in the application of materials as determined ie Polyglass' sole judgment; 10) Failure to utilize Polyglass' latest instructions and recommendations as to installation procedures; 11) Damage resulting from lack of positive, proper or adequate drainage; 12) Loss in part or in whole of granule or other surfacing: 13) Damage or injury arising in any way from an actual or alleged discharge or release of any pollutant or waste, environmental or airbome contaminates; 14) Damage or injury arising in any way from testing/samplir.g of undedayment, design and consulting errors or omissions. In addition to items 1-14 above, owner agrees that Polyglass shall have no responsibility whatsoever for bodily injury to any person or damage to the structure or its contents directly pr indirectly arising out of any defects in yes roof undedayment or any other consequential or incidental damages or attomeys fees. Polyglass' sole responsibility is the repair or replacement of defective underlayment membrane that is directly related to leakage. This warranty does not include the cost of removal of existing, or the cost of labor to repair or replace the defective underlayment and/or roofing covering/system installed to the Polyglass underlayment. Claim Procedure: Polyglass shall have no obligation under this warranty unless Owner shall have promptly notified Polyglass in writing to Polyglass by registered or certified mail. Direct all claims to Polyglass, U.S.A., Inc. 1111 W. Newport Center Drive; Deerfield Beach, FL 33442, ATTN: Warranty Department. Any claim shall provide a copy of warranty and detailed information of the leakage and alleged defect. Polyglass must receive such notice within ten (10) days after discovery of the claimed defect: Owner shall provide Polyglass, and its agents and employees, free and reasonable access to the roof during regular business hours during the tem) of the warranty. Owner shall be responsible for all costs related to safe and reasonable access to investigate claim. Polyglass' good -faith determination of the source of leakage, damage, or alleged detect to the roof shall be exclusive and binding to owner. Polyglass' failure at any time to enforce any of the tem)s and conditions of this warranty shall not be construed as a waiver of such provisions. Polyglass reserves the right to discontinue or modify any of its products and shall not be liable to Owner as a result of any such discontinuance or modification. THIS WARRANTY SUPERCEDES AND IS IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABLILITY AND FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY SHALL BE OWNER'S EXCLUSIVE REMEDY AGAINST POLYGLASS OR ITS AFFILIATES, AND NEITHER POLYGLASS NOR ITS AFFILIATES SHALL BE LIABLE FOR ANY CONSEQUENTIAL OR INCINDENTAL DAMAGES. POLYGLASS' AGENTS HAVE NC AUTHORITY TO GIVE WARRANTIES BEYOND THOSE PROVIDED IN THS WARRANTY.ALL RIGHTS AND DUTIES ARISING UNDER THIS WARRANTY SHALL BE GOVERNED BY FLORIDA LAW. Warranty presented and determined as incomplete or inaccurate shall be considered null and void. RE CITAprIl Y o EIVED TUKWILA MAY 8 2013 PERMIT CENTER Building Owner Roof Maintenance Warranty Guidelines MAINTENANCE AND CARE FOR YOUR POLYGLASS ROOF MEMBRANE To avoid interruption and/or cancellation of your warranty coverage, the following Maintenance 'Program is a requirement. There are various items associated with your roof system that are NOT covered under the warranty. Some can have a direct impact on the performance, life cycle and watertight integrity of the roofing system. It is the responsibility of the Owner to regularly maintain these. As the Owner, a file of records should be maintained related to all roof and roof -top associated activities. Such file should contain the original warranty, invoices related to the original roof installation, repair invoices, a log of roof inspections and any roof -top activities such as service to roof top mechanical units. Polyglass strongly recommends the Owner institute a roof log for all parties accessing the roof, regardless of who or the purpose, that they are required to sign. This protects you, the owner, from 1) unwanted roof traffic and 2) any damage caused can, many times, be traced back to the responsible party. The roof should have a visual inspection at a minimum rate of two (2) times per year by a qualified professional. Many Polyglass Registered Contractors offer this service for a nominal fee. Inspections are generally recommended in the spring and fall. It is a good practice to have the roofs inspected after severe weather conditions such as: hail, strong winds, hurricanes, blizzards, ice storms, etc. Proper precautions should be followed during inspections to prevent against trip/fall accidents. Guidelines For Roof Inspection & Generalized Remedial Repairs 1. Remove debris, such as, leaves, twigs, branches, dirt, rocks, bottles, trash, etc., that has accumulated. 2. Clean gutters, down spouts, drains and scuppers. Make sure water freely flows from the roof. No standing water should remain on the roof surface within 48 hours after the last precipitation. 3. Examine all metal flashing areas for rusting or damage that may have been caused by traffic, wind, hail, snow, ice, etc. All damaged, loose, or poorly sealed materials must be repaired by an authorized roofing contractor approved for repair work to POLYGLASS® Roofing Membranes. 4. All exposed mastics and sealants regardless of purpose or function are required maintenance items to be remediated by the Owner, including pitch pan and metal flashing sealants. 5. Examine all adjacent areas to the roof, parapet walls and adjoining structures. Damage to items such as masonry, failing mortar joints, loose or missing sealants, loose stone stone/tile, loose and improperly sealed counterflashing, etc. often causes leaks that are inadvertently blamed on the roofing system and not provided for by the warranty. Not only does this cost the roofing manufacturer time in the investigation of problems not associated with the roofing membrane; it costs the Owner time and money. Many roofing manufacturers, including POLYGLASS®, will back charge an Owner for the time spent to investigate non roof related problems. These items need to be repaired by the properly trained personnel to avoid any unnecessary charges or voiding of warranty coverage. Unauthorized repairs to the roof will void warranty coverage. 6. Granule loss of mineral surface membranes is typical and not a manufacturing defect. In cases of granule loss that becomes more noticeable. additional surfacing should be applied as directed by POLYGLASS®. 7. When repairing items to the roofing membrane, associated items, or building structure, be sure to use precaution and properly protect the roofing surface from damage. 8. Examine roof top equipment, air condition units, condensers, exhaust fans, antennas and other roof top items for damage. Check for leaking oil, damaged flashings or loose parts/equipment that could cause puncture damage to the roofing membranes. All units shall be checked to assure they are sound, watertight and not be displaced by wind events. 9. Check the building for excessive movement or settlement. Improper placement or omission or needed expansion joints could cause splits or stress in the roofing material/system, drastically reducing the life cycle of the roofing system. 10. All work directly or indirectly related to the roofing system where the roofing material needs to be repaired, i.e. new curbs, units, exhaust fans, antenna installation, repairs, etc., must be accomplished by a current POLYGLASS® Registered Contractor. Failure of the Owner to utilize an authorized applicator will result in immediate termination of the warranty 11. Conditions beyond those noted herein above should be provided to POLYGLASS® in writing within 15 days of discovery for recommendations. SEPARATE PERMIT REQUIRED FOR: Ceilleihanicai Dottectrical [yPiumbing Es • Y'ng City of Tukwila ' ^'NG DIVISION REVISIONS workNo shall bomade to the scope of without prior approval of ukwila Building Division. NOTE: ; s‘ visions will require a new plan submittal and may include additional plan review fees. rif\e, rerr kce. -4- FILE COPY Pennft089 PISrwiew approval is subject to Mors and Vis. k. _ ° of constriction documents does not authorize ;.sem of any adopted code or ordnance. Receipt LpproveTki and conditions is admloM ledged: Byat - Roy �s� Dalt 34251;3 City Of Tukwila BUILDING DIVISION bk'2J-086 REVIEWED FOR CODE COMPLIANCE APPROVED MAR 21 2013 City of Tukwila BUILDING DIVISION RECEIVED CITY OF TUKWILA MAR 1 3 2013 PERMIT CENTER I19r.4.01: 1 E a rt, FILE COPY Ls1,^ i`^'!+.3 131 Q$Z REVIEWED FOR CODE COMPLIANCE APPROVED MAR 21 2013 City of Tukwila BUILDING DIVISION tvo 88 RECEIVED CITY OF TUKWILA MAR 1 3 2013 PERMIT CENTER gl FILE COPY Proposal Submitted to: Tecton Corporation Job Name: The Terrace Apartments A,B&Carports Date: 01/03/13 Street Address: 14240 Interurban Ave S #212 Job Description: Roof Replacement A, B and Carports Bid # 08-01-13 City, Sate, Zip Tukwila, WA 9816.8 Location: 13705 56th Ave S Tukwila, WA Quantity: As listed Attention: Mike Jansen Phone: 206-448-4100 Fax 206-448-4777 Source Rpt. Scope of Work 1) A "Honey Bucket" portable toilet will be on location for our workers during this project. 2) Remove existing cap metal flashings and haul away in preparation for new. 3) Tearoff and remove all the existing roof coverings down to the '/4" plywood substrate. Set any protruding fasteners and sweep roof clean and dry as required. During the removal process, the substrate is to be inspected for structural soundness. Any extra labor connected with repair work will be charged on a time ($57.50 per hour) and materials basis. Plywood replacement will be billed at $52.00 per sheet of 1/2" 4'x8' CDX plywood; Plywood replacement billing rates include labor, materials, hauling and disposal fees. 4) Provide and install new 3x3 fibered cants as necessary at all vertical roof -to -wall and straight curb penetrations and transitions. 5) Mechanically Fasten Malarkey #501 modified baee sheet with 2"side laps and 6" end laps directly to the substrate and extend up •a ..:ant strips at least 2" 6) Provide and install Polyglass.Polytle t "G" White Granulated APP Modified Bitumen torch applied membrane over the roof_ir,::. area consistent with the manufacturer's standard specifications. WARRANT Y :12 -year on Labor and 12 -year on Material according to the manufacturer's written warranty. REVIEVVE5FOFFr'r''' membrane. e coat all wall surfaces in preparation for the scif adhered base sheet and CODE COMPLIANCE APPROVED MAR 21 2013 City of Tukwila BUILDING DIVISION bi3O9:8 PO. Box 5566 • Kent, WA 98064-5566 (425) 917-2020 • (206) 786-4412 • Fax (253) 735-2348 Contractor's License: ROOFTI*006QA RECEIVED CITY OF TUKWILA MAR 1 3 2013 PERMIT CENTER INC. Install Elastoflex SAV self adhered SBS base sheet over all walls. Mechanically fasten with simplex roofing nails for extra holding strength to make sure the torch membrane stays perfectly in place without sagging. 9) Provide and install at the parapet walls and/or similar vertical surfaces, where required the torch applied flashing membrane consistent with manufacturer's specifications. 10) Membrane Flash Curbs, roof edges and other roof transitions where required. This means that the edges will have a double layer at all bends. 11) Provide and install new lead pipe jacks and lead caps before the flashing according to the manufacturer's specifications. 12) Provide and install white aluminum turbine roof vents. Diameter 12" at throat, The flanged flat base is to be membrane flashed into the roofing system or box curb mounted and membrane flashed in according to the job requirements. (44 - each turbine fans to be installed) 13) Remove existing deck mounted roof vents and save. At vent opening construct a wood 2x8 curb with a 2x2 cant at the base. Base and membrane flash the new curbing, then replace the roof vents with new on the raised curbs using screws for attachment. Note: It is important to make sure that all bath fans and dryer lines are vented out the roof surface and not into the rafter or attic cavity. 14) All existing down drop scuppers will be removed and discarded. New sheet metal down drop scuppers will be installed according to the manufacturer's specifications. 15) Any additional drainage revisions including new drains, adding slop and downspouts to relieve standing water conditions will be an extra to this contract on a time & materials basis. 16) Any ventilation improvements required in the rafter cavities will be corrected on a T & M basis. Whether or not more ventilation is required on this building will be determined by the condition of the plywood deck when the old roof is removed. 17) Termination bar metal will be installed where required to make a watertight condition per the manufacturer's warranty specifications. 18) Install new prefinished Brown 24 -gauge galvanized perimeter edge metal. 19) Composition Sloped Sections: P.O. Box 5566 • Kent, WA 98064-5566 (425) 917-2020 • (206) 786-4412 • Fax (253) 735-2348 Contractor's License: ROOFTI`006QA 20) Tear off and remove the composition layer down to the wood sheathing. Set any protruding fasteners and sweep roof clean and dry as required. Haul debris away. 21) Install over the entire roof area 1 -laver of 30# ASTM asphalt saturated felt under- layment. The felt is to be installed shingle fashion starting at the lower edge to of the roof and lapping over each other 2" on the upper edge and 6" on ends. 22) Provide and install according to the manufacturer's specifications, Pabco Premier fiberglass shingles UL Class "A"fire rated. Warranty: Limited Lifetime consistent with the manufacturer's standard form and l0 -year labor by Roof Tight. Color: Weathered White 23) Install new starter and bleeder strips as per manufacturer's specifications. 24) At ridge, replace the ridge vent with new PVC nail on ridge venting and cover with ridge material according to the manufacturer's specifications. 25) Install new hip and ridge shingles at all required locations. 26) .Install 1 1/4"x 1 '/2" in stretch dimension, pre -painted (baked on enamel), 26 -gauge Galvanized gable end (rake) metal. Color: Brown 27) Install new gutter edge metal prefinished (baked on enamel), 26 -gauge. Color: Brown. 28) Contractors during the execution of this contract will at all times operate in a safe and organized manner keeping- all tools, equipment and vehicles in designated work area. The job site will be swept and kept clean of debris during working hours and prior to daily work completion. In consideration for providing all equipment, labor and materials here in the described, complete in accordance with above specifications, for the contract sum of: Building "B" $52,300 + extras and sales tax Carports all 4S $17,460 + sales tax Building "A" $52,300 + extras and sales tax Payment Terms: 40% down payment per building 60% upon completion per building PO. Box 5566 • Kent, WA 98064-5566 (425) 917-2020 • (206) 786-4412 • Fax (253) 735-2348 Contractor's License: ROOFTI*006QA FELE COPY POLYFLEX® G PRODUCT DESCRIPTION Polyflex G membranes ore premium, polyester reinforced APP modified bitumen roofing membranes specially designed for heat -welded applications Constructed with premium Atactic Polypropylene resins, and incorporating superior polyester re n.forcng, Poly` ex G provides an exceptionally durable roofing product which is easy to install and will provide longterm weathering performance With a granulated surface (available in several colors) and either a polyolefin or sand backing, Polyflex G exceeds all minimum ASTM standards for tensile strength, puncture resistance and flexib lity Polyflex G membranes con also be used os flashing membranes in oil applicable specifications, in accordance with recommended installation practices USES • Heat -welded or cold -applied cap sheet • Applied directly over an acceptable substrate or as-Iy y. t_' • New roofing, re -roofing, re-cover and for flashing dE tails REVIEWED FOR CODE COMPLIANCE APPROVED FEATURES AND BENEFITS • Exceptional weathering characteristics • Puncture and tear resistant • Low -temp flexibility, exceptional tensile TECHNICAL DESCRIPTION MAR 21 2013 strength ar d elongation properties City of Tukwila BUILDING DIVISION • PRODUCT DATA =overage (Approx) 100 sq ft Neight 110 lbs oil Size 32'10" x 39 1/s" (10m x 1 m) tolls/Pallet. 20 APPLICABLE STANDARDS TEST METHOD ASTM D5147 PROPERTY : - Thickness, typical, mm (mils) mai.. VALUE VALUE ,.. 4.5 (180) ASTM 05147 Peak Load @ 23+/-2C (73.4+/-3.6F), MD and XMD, min, kN/m (Ibf/in.) 8.8 (50) ASTM D5147 Elongation n 23+/-2C (73.4+/-3.6F(, MD and XMD, min (%) 23 ASTM D5147 Tear Strength @ 23+/-2C (73.4+/-3.6F), min, N (lbf) 311 (70) ASTM 05147 Low Temperature Flexibility, max, C (F) 0 (32) ASTM D5147 Granule Embedment, g 2 AVAILABLE COLORS Top surface granule protection is available in a variety of colors such as. Black Buff Chestnut Grey Slate White Red Blend Pine Green Heather Blend 10/2010 b 3bQ39 Oak Weatherwood RECEIVED CITY OF TUKWILA MAR 1 3 2013 PERMIT CENTER AA. • ASTM D 6222 Type I Miami Dade Code Compliance Factory Mutual Approved UL Classified for use in class A, B or C roofs, as listed in the latest UL "Roofing Materials and Systems Directory" ICC ESR -2018 TDI IA FM PRODUCT WARRANTY Unless otherwise incorporated into or part of a supplemental manufacturer's warranty, Polygloss warrants its product(s) for a period of 10 years against manufacturing defects in its product that directly results in leakage. Warranty coverage is an annually declining pro -rated warranty. NAIEhII 'Ohl.`:O MATERIAL/ AFP IAi1LA .Pc ;iaTE'h15 PGLYGLASt 8 MADE) suet 1-800-222-9782 www.polyglass.com v,- 0 „ ye J.� POLYFLEX° G APPLICATION INSTRUCTIONS Polyflex G is intended to be used as the primary weathering surface in new or re -roof applications. Polyflex G is to be applied as the outermost layer of a multi -ply roof system over a compatible Polyglass base or inner ply sheet. Polyflex G may be applied directly to non-combustible substrates. • Apply over clean, dry, dust and debris -free substrates. Prime concrete decks prior to application with PG 100 Asphalt Primer. • When re -roofing, remove all prior roofing materials down to a clean debris -free substrate and properly close -off all abandoned roof penetrations. • Concrete or steel decks shall be designed with proper expansion devices. • Wood decks shall have all joints blocked and properly supported. • Ensure the fire rating of the assembly over any combustible substrate. • Ensure the installation of Polyflex G does not prevent the ventilation of existing construction. • Do not apply over shingles or any granulated surface. • While installing Polyflex G: 1. Start at the low point of the roof. 2. Unroll the material and allow to relax in the sun for at least 15 minutes. 3. Install with traditional torch roofing techniques ensuring proper heating of the roofing material as not to expose the reinforcement. 4. Do not heat the substrate. 5. Position successive rolls providing a minimum 6" end lap and 3" side lap. Asphalt bleed out shall be 1/4" to 3/8" on all seams. 6. Laps shall be rolled with a 6" -wide roller immediately after heat welding. • Details and flashing may be installed using Polyflex G with torch applied techniques Do not use cold adhesives or hot asphalt. Check project details for proper installation requirements. MANUFACTURING FACILITIES • Fernley, NV • Hazleton, PA • Winter Haven, FL All DATA FURNISHED REFERS TO STANDARD PRODUCTION AND IS GIVEN IN GOOD FAITH WITHIN THE APPUCABLE MANUFACTURING AND TESTING TOLERANCES. POLYGLASS USA, INC., RESERVES THE RIGHT TO IMPROVE AND CHANGE as PRODUCTS AT ANY TIME WITHOUT PRIOR NOTICE. POLYGLASS USA, INC. CANNOT BE HELD RESPONSIBLE FOR THE USE OF 175 PRODUCTS UNDER CONDITIONS BEYOND ITS OWN CONTROL. NATER PRILLOYING MATERIALS AND INSUI:ATINO SYSTEMS 8 MAPEI o H a D n `aoe/ 1-800-222-9782 www.polyglass.com FILE COPY p,',, tIlt Mn. POLYGLASS® G2 BASE PRODUCT DESCRIPTION Polyglass G2 Base is a premium, inorganic fiberglass mat reinforced base sheet which has been saturated and coated with a weathering grade asphalt. The top surface is then coated with a fine mineral parting agent to prevent sticking in the roll. Designed as an ideal first roofing ply in SBS/APP modified or Built Up roofing systems, this wrinkle resistant easy roofing membrane can be installed over a variety substrates. USES • Specially designed as a base layer in hot mop, cold applied and mechanically - attached applications FEATURES AND BENEFITS • Strong, resilient base sheet with exceptional nail holding performance and puncture resistance • Wrinkle resistant; will lay flat for easy install • Consistent thickness on both sides eliminates pinholes preventing asphalt bleed through TECHNICAL DESCRIPTION TEST METHODPROPERTY�r, ASTM 4601 ASTM 4601 ASTM 4601 ASTM 4601, Type II Mass of Desaturated Glass Mat Surfacing and stabilizer, max % Mass of Asphalt Coating Breaking strength @ 77°F (longitudinal and transverse) TYPICAL VALUE 1.7 lbs/ 100 ft2 65 7.0 lbs/ 100 ft2 44 Ib ft/in RECEIVED CITY OF TUKWILA MAR 1 3 2013 PERMIT CENTER Copyright ©2011 by Polygloss U.S.A., Inc and all rights ore ; eserved Edition Dote: 08/11 • Do<# Polyolass 02 Base REVIEWED FOR CODE COMPLIANCE APPROVED MAR 21 2013 City of Tukwila BUILDING DIVISION D‘3 - o98 PRODUCT DATA Coverage (Nominal) 300 sq ft Weight (Approx) 72 lbs Roll Size 108' x 36" Rolls/Pallet 16 APPLICABLE STANDARDS • ASTM D 4601 Type II • UL Classified for use in class A, B or C roofs, os listed in the latest UL "Roofing Materials and Systems Directory" • TDI PRODUCT WARRANTY Polyglass USA, Inc. commercial roofing membranes con be backed with a manufacturer's warranty for up to 20 years when used as port of on approved, multi-pfy roofing system. Please see your Polygkbss USA, Inc. Sales or Technical Representative for specifications and details. l,;TI,:;PI.t, ..c MAT ,ILIAL, AND i:..,C1.9I;Nk. S13T11i5 L.ii PCLYGLASt ZBM,APEf GROUP 1-800-222-9782 www.polyglass.com -. ii(iPOLYGLASS® G2 BASE ii APPLICATION INSTRUCTIONS ZPolyglass G2 Base is intended to be used as a base sheet in new or re -roof applications. Polyglass G2 Base may be applied 0 5 PR•DU 7: directly to non combustible substrates. Polyglass G2 Base requires the installation of a compatible granulated cap sheet to complete the roofing system. • Apply over clean, dry, dust and debris -free substrates. Prime concrete decks prior to application with PG 100 Asphalt Primer. • When re -roofing, remove all prior roofing materials down to a clean debris -free substrate and properly close -off all abandoned roof penetrations. • Concrete or steel decks shall be designed with proper expansion devices. • Wood decks shall have all joints blocked and properly supported. • Ensure the fire rating of the assembly over any combustible substrate. • Ensure the installation of Polyglass G2 Base does not prevent the ventilation of existing construction. • Do not apply over shingles or any granulated surface. • While installing Polyglass G2 Base: 1. Start at the low point of the roof. 2. Unroll the material and allow to relax. 3. Position successive rolls providing a minimum 6" end lap and 3" side lap. • Polyglass G2 Base can be used as a base sheet in flashing applications. Check project details for proper installation requirements. • Engineered to be used in BUR construction of roofs. POLYGLASS U.S.A., INC. MANUFACTURING FACILITIES • Fernley, NV • Hazleton, PA • Winter Haven, R CORPORATE HEADQUARTERS Polyglass U.S.A., Inc. 1 1 1 1 West Newport Center Drive Deerfield Beach, FL 33442 www.polyglass.com General Line: (888) 410-1375 (954) 233-1330 Customer Service: (800) 222-9782 Technical Service: (866) 802-8017 Questions? technical@polyglass.com Product Disclaimer: Unless otherwise incorporated into or part of a supplemental manufacturer's against manufacturing defects in its product that directly results in leakage for a period of 2 years. Refer to material safety data sheet (MSDS) for specific data and handling of our products. All data furnished refers to standard production and is given in good faith within the applicable manufacturing and testing tolerances. Polyglass U.S.A., Inc., reserves the right to improve and change its products at any time with- out prior notice. Polyglass U.S.A., Inc. cannot be held responsible for the use of its products under conditions beyond its own control. For most current product data and warranty information, visit www.polyglass.com warranty, Polyglass warrants its product(s) WATERPROOFING MATERIALS AND INSULATING SYSTEMS G MAPS' OUP vdoe� 1-800-222-9782 www.polyglass.com 0 p '. T C .• ''.. i PLAN REVIEW/ROUTING SLIP ACTIVITY NUMBER: D13-088 DATE: 03-13-13 PROJECT NAME: TERRACE APARTMENTS - BLDG A SITE ADDRESS: 13705 56 AV S X Original Plan Submittal Response to Incomplete Letter # Response to Correction Letter # Revision # After Permit Issued EPARTMENTS: ui ding ivision • Fire Prevention • Public Works ❑ Structural ❑ Planning Division Permit Coordinator s DETERMINATION OF COMPLETENESS: (Tues., Thurs.) DUE DATE: 03-14-13 Complete17j Incomplete ❑ Not Applicable ❑ Comments: Permit Center Use Only INCOMPLETE LETTER MAILED: LETTER OF COMPLETENESS MAILED: Departments determined incomplete: Bldg ❑ Fire ❑ Ping ❑ PW 0 Staff Initials: TUES/THURS ROUTING: Please Route Structural Review Required REVIEWER'S INITIALS: ❑ No further Review Required DATE: APPROVALS OR CORRECTIONS: Approved Notation: Approved with Conditions DUE DATE: 04-11-13 Not Approved (attach comments) n REVIEWER'S INITIALS: DATE: Permit Center Use Only CORRECTION ON LETTER MAILED: Departments issued corrections: Bldg 0 Fire 0 Ping 0 PW 0 Staff Initials: Documents/routing slip.doc 2-28-02 Contractors or Tradespeople Peter Friendly Page • General/Specialty Contractor A business registered as a construction contractor with LEt1 to perform construction work within the scope of its specialty. A General or Specialty construction Contractor must maintain a surety bond or assignment of account and carry general liability insurance. Business and Licensing Information Name ROOF TIGHT INC UBI No. 601988145 Phone 2537352347 Status Active Address Po Box 5566 License No. ROOFTI*006Qr4 Suite/Apt. License Type Construction Contractor City Kent Effective Date 11/1/2000 State WA Expiration Date 11/7/2013 Zip 980645566 Suspend Date County King Specialty 1 General Business Type Corporation Specialty 2 Unused Parent Company Business Owner Information Name Role Effective Date Expiration Date PAUST, SCOTT 01/01/1980 Bond Information Page 1 of 1 Bond Bond Company Name Bond Account Number Effective Date Expiration Date Cancel Date Impaired Date Bond Amount Received Date 3 American Contractors Indem CO 100141377 11/01/2010 Until Cancelled $12,000.00 10/13/2010 2 CBIC SD2984 11/01/2001 Until Cancelled 11/01/2010 $12,000.00 10/18/2001 Assignment of Savings Information No records found for the previous 6 year period Insurance Information Insurance Company Name Policy Number Effective Date Expiration Date Cancel Date Impaired Date Amount Received Date 15 Kinsale Insurance Company 0100001668-1 03/03/2012 07/03/2013 $1,000,000.00 02/20/2013 14 KINSALE INS CO 00099939 03/03/2011 03/03/2012 $1,000,000.00 03/02/2011 13 CENTURY SURETY CO CCP640688 03/03/2010 03/03/2011 $1,000,000.00 03/02/2010 12 CENTURY SURETY CO CCP588263 03/03/2009 03/03/2011 $1,000,000.00 03/01/2010 11 CENTURY SURETY CO 2131604B 03/03/2009 03/03/2010 $1,000,000.00 02/27/2009 10 FIRST MERCURY INS CO FMWA000073 03/03/2008 03/03/2009 $1,000,000.00 03/05/2008 9 FIRST MERCURY INS CO FMFL002574 03/03/2007 03/03/2009 $1,000,000.00 02/15/2008 8 BURLINGTON INS CO HGL0012240 03/03/2007 03/03/2008 $1,000,000.00 02/28/2007 Summons/Complaint Information No unsatisfied complaints on file within prior 6 year period Warrant Information No unsatisfied warrants on file within prior 6 year period Infractions/Citations Information No records found for the previous 6 year period https://fortress.wa.gov/lni/bbip/Print.aspx 03/25/2013