HomeMy WebLinkAboutPermit D14-0155 - MIDLAND BUILDING #1 - REROOFMIDLAND BUILDING #1
350 MIDLAND DR
D14-0155
City of Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206-431-3670
Inspection Request Line: 206-438-9350
Web site: http:/(www.TukwilaWA.gov
DEVELOPMENT PERMIT
Parcel No: 8836500100 Permit Number: D14-0155
Address: 350 MIDLAND DR Issue Date: 6/2/2014
Permit Expires On: 11/29/2014
Project Name: MIDLAND BUILDING #1
Owner:
Name: AMB PROPERTY CORP/ATTN: REA
Address: 60 STATE ST STE 1200 , BOSTON, WA,
02109
Contact Person:
Name: DAN JOHNSON
Address: 13105 HOUSTON RD E , SUMNER, WA,
98390
Phone: (253) 863-4455
Contractor:
Name: WAYNE'S ROOFING INC Phone: (253) 863-4455
Address: 13105 HOUSTON RD , SUMNER, WA,
98390
License No: WAYNESR205Q5 Expiration Date: 5/2/2015
Lender:
Name:
Address:
DESCRIPTION OF WORK:
RECOVER EXISTING SINGLE LAYER ROOF WITH NEW ROOF
Project Valuation: $267,933.00
Fees Collected: $5,001.82
Type of Fire Protection: Sprinklers:
Fire Alarm:
Type of Construction: Occupancy per IBC:
Electrical Service Provided by: TUKWILA FIRE SERVICE Water District: TUKWILA
Sewer District: TUKWILA SEWER SERVICE
Current Codes adopted by the City of Tukwila:
International Building Code Edition:
International Residential Code Edition:
International Mechanical Code Edition:
Uniform Plumbing Code Edition:
2012 International Fuel Gas Code:
2012 WA Cities Electrical Code:
2012 WA State Energy Code:
2012
2012
2012
2012
Public Works Activities:
Channelization/Striping:
Curb Cut/Access/Sidewalk:
Fire Loop Hydrant:
Flood Control Zone:
Hauling/Oversize Load:
Land Altering:
Landscape Irrigation:
Sanitary Side Sewer:
Sewer Main Extension:
Storm Drainage:
Street Use:
Water Main Extension:
Water Meter:
Volumes: Cut: 0 Fill: 0
Number: 0
No
Permit Center Authorized Signature:
Date:
Ati
I hearby certify that I have read and a amin d this permit and know the same to be true and correct. All
provisions of law and ordinances gove ing his work will be complied with, whether specified herein or not.
The granting of this permit does not presume to give authority to violate or cancel the provisions of any other
state or local laws regulating construction or the performance of work. I am authorized to sign and obtain this
development permit and agree to the conditions attached to this permit.
Signature:
Print Name:
Date: 4. - t. - j `f
This permit shall become null and void if the work is not commenced within 180 days for the date of issuance, or if
the work is suspended or abandoned for a period of 180 days from the last inspection.
PERMIT CONDITIONS:
1: ***BUILDING PERMIT CONDITIONS***
2: Work shall be installed in accordance with the approved construction documents, and any changes made
during construction that are not in accordance with the approved construction documents shall be
resubmitted for approval.
3: All permits, inspection record card and approved construction documents shall be kept at the site of work
and shall be open to inspection by the Building Inspector until final inspection approval is granted.
4: All construction shall be done in conformance with the Washington State Building Code and the
Washington State Energy Code.
5: Remove all demolition rubble and loose miscellaneous material from lot or parcel of ground, properly cap
the sanitary sewer connections, and properly fill or otherwise protect all basements, cellars, septic tanks,
wells, and other excavations. Final inspection approval will be determined by the building inspector based
on satisfactory completion of this requirement.
6: Prior to final inspection for this building permit, a copy of the roof membrane manufacturer's warranty
certificate shall be provided to the building inspector.
7: VALIDITY OF PERMIT: The issuance or granting of a permit shall not be construed to be a permit for, or an
approval of, any violation of any of the provisions of the building code or of any other ordinances of the City
of Tukwila. Permits presuming to give authority to violate or cancel the provisions of the code or other
ordinances of the City of Tukwila shall not be valid. The issuance of a permit based on construction
documents and other data shall not prevent the Building Official from requiring the correction of errors in
the construction documents and other data.
PERMIT INSPECTIONS REQUIRED
Permit Inspection Line: (206) 438-9350
1700 BUILDING FINAL**
CITY OF TU. ILA
Community Development Department
Public Works Department
Permit Center
6300 Southcenter Blvd, Suite 100
Tukwila, WA 98188
http://www.TukwilaWA.gov
Building NIOncit No.
Project No.
Date Application Accepted:
Date Application Expires:
051,41ci
tt ZZ
(For office use only)
CONSTRUCTION PERMIT APPLICATION
Applications and plans must be complete in order to be accepted for plan review.
Applications will not be accepted through the mail or by fax.
**Please Print**
SITE LOCATION
Site Address: 3 SCE
Tenant Name:
/Y!,'L�lia✓Gl br.
King Co Assessor's Tax No.:
Suite Number: Floor:
New Tenant: ❑ Yes I.. No
PROPERTY OWNER
Name: M
1_ro iJgTS
Address: I Z `12 o L7a7-6.....,..i
r .
5� . (t .7
City: State:
Tvx�..;i.i.. wtV.
Zi •
p•7 °n(.$
CONTACT PERSON - person receiving all project
communication
Name:
)aN J t!..u.,,J /J-oc'
.--.,ftc
Address:
/3
t J .3- J'fa
City:
State: Zip:
5 .� .....-.....1`� w� (
3 4�
Phone:
f'ax:
53 863 4 ‘tsl
Email:
1
C�tnp c......,-1. ., ci four+-,c . 1/4.0-,-
GENERAL CONTRACTOR INFORMATION
Company Name: W , Ni
J Address:
/3r s--- -JJ-.,.i Z..i c
City: S -.3,--- c .- State: c�v3 Zip: S�, 35,0
Phone: 'I-5 > ge 3'N jy Fax:
Es� oscr
Contr Reg No.: wAY�E�xp Date: s'_ is --
Tukwila Business License No.: h, (D c 191 Dl
$ b`7k, ob
ARCHITECT OF RECORD
Company Name:
Architect Name:
Address:
City:
State:
Zip:
Phone:
Fax:
Email:
ENGINEER OF RECORD
Company Name:
Engineer Name:
Address:
City:
State:
Zip:
Phone:
Fax:
Email:
LENDER/BOND ISSUED (required for projects $5,000 or
greater per RCW 19.27.095)
Name:
Address:
City: State: Zip:
H:Wpplications\Forms-Applications On Line\2012 Applcations\Permit Application Revised - 2-7-12.docx
Revised: February 2012
bh
Page 1 of 4
BUILDING PERMIT INFORMA' — 206-431-3670
Valuation of Project (contractor's bid price): $ Z ' -71 9 33 - Existing Building Valuation: $
Describe the scope of work (please provide detailed information):
1 ,—: �, �: I� L �. C� roa;_
/�oF
Will there be new rack storage? ❑ ....Yes
XNo If yes, a separate permit and plan submittal will be required.
Provide All Building Areas in Square Footage Below
Existing
Interior Remodel
Addition to
Existing
Structure
New
Type of
Construction per
IBC
Type of
Occupancy per
IBC
1st Floor
2nd Floor
3rd Floor
Floors thru
Basement
Accessory Structure*
Attached Garage
Detached Garage
Attached Carport
Detached Carport
Covered Deck
Uncovered Deck
PLANNING DIVISION:
Single family building footprint (area of the foundation of all structures, plus any decks over 18 inches and overhangs greater than 18 inches)
*For an Accessory dwelling, provide the following:
Lot Area (sq ft): Floor area of principal dwelling: Floor area of accessory dwelling:
*Provide documentation that shows that the principal owner lives in one of the dwellings as his or her primary residence.
Number of Parking Stalls Provided: Standard: Compact: Handicap:
Will there be a change in use? 0 Yes 0 No If "yes", explain:
FIRE PROTECTION/HAZARDOUS MATERIALS:
O Sprinklers ❑ Automatic Fire Alarm 0 None ❑ Other (specify)
Will there be storage or use of flammable, combustible or hazardous materials in the building? ❑ Yes 0 No
If 'yes', attach list of materials and storage locations on a separate 8-1/2" x 11 " paper including quantities and Material Safety Data Sheets.
SEPTIC SYSTEM
❑ On -site Septic System — For on -site septic system, provide 2 copies of a current septic design approved by King County Health
Department.
H: Applications\Forms-Applications On Line\2012 Applications\Permit Application Revised - 2-7-12.docx
Revised: February 2012
bh
Page 2 of 4
PUBLIC WORKS PERMIT IN 'tMATION — 206-433-0179
Scope of Work (please provide detailed information):
7.1E s)
Ca11 before you Dig: 811
Please refer to Public Works Bulletin #1 for fees and estimate sheet.
Water District
❑ .. Tukwila ❑ ...Water District # 125
❑ .. Water Availability Provided
Sewer District
❑ .. Tukwila
❑ .. Sewer Use Certificate
❑ ... Highline
❑ ...Valley View ❑... Renton
❑ ...Sewer Availability Provided
0... Renton
❑... Seattle
Septic System:
❑ On -site Septic System — For on -site septic system, provide 2 copies of a current septic design approved by King County Health Department.
Submitted with Application (mark boxes which apply):
❑ .. Civil Plans (Maximum Paper Size — 22" x 34")
❑ .. Technical Information Report (Storm Drainage) ❑... Geotechnical Report ❑ .. Traffic Impact Analysis
❑ .. Bond ❑... Insurance ❑... Easement(s) ❑... Maintenance Agreement(s) ❑ .. Hold Harmless — (SAO)
❑ .. Hold Harmless — (ROW)
Proposed Activities (mark boxes that apply):
❑ .. Right-of-way Use - Nonprofit for less than 72 hours
❑ .. Right-of-way Use - No Disturbance
❑ .. Construction/Excavation/Fill - Right-of-way ❑
Non Right-of-way ❑
❑ .. Total Cut
❑ .. Total Fill
cubic yards
cubic yards
El...Right-of-way Use - Profit for less than 72 hours
0...Right-of-way Use — Potential Disturbance
❑ ... Work in Flood Zone
O ... Storm Drainage
❑ .. Sanitary Side Sewer 0... Abandon Septic Tank ❑... Grease Interceptor
❑ .. Cap or Remove Utilities ❑... Curb Cut ❑... Channelization
❑ .. Frontage Improvements El...Pavement Cut 0... Trench Excavation
❑ .. Traffic Control ❑... Looped Fire Line ❑... Utility Undergrounding
0 .. Backflow Prevention - Fire Protection "
Irrigation ,,
Domestic Water
❑ .. Permanent Water Meter Size (1)
❑ .. Temporary Water Meter Size (1)
❑ .. Water Only Meter Size
❑ .. Sewer Main Extension Public
❑ .. Water Main Extension Public
El
WO # (2) " WO # (3) " WO #
WO # (2) " WO # (3) " WO #
WO # ❑ .. Deduct Water Meter Size ,,
Private ❑
Private 0
FINANCE INFORMATION
Fire Line Size at Property Line Number of Public Fire Hydrant(s)
❑ .. Water ❑ .. Sewer ❑ .. Sewage Treatment
Monthly Service Billing to:
Name: Day Telephone:
Mailing Address:
Water Meter Refund/Billing:
Name:
Mailing Address:
City
State Zip
Day Telephone:
City
State Zip
H:\ApplicationsWorms-Applications On Line\2012 Applications\Permit Application Revised - 2-7-12.docx
Revised: February 2012
bh
Page 3 of 4
PERMIT APPLICATION NOTES
Value of Construction — In all cases, a value of construction amount should be entered by the applicant. This figure will be reviewed and is subject
to possible revision by the Permit Center to comply with current fee schedules.
Expiration of Plan Review — Applications for which no permit is issued within 180 days following the date of application shall expire by limitation.
The Building Official may grant one or more extensions of time for additional periods not exceeding 90 days each. The extension shall be
requested in writing and justifiable cause demonstrated. Section 105.3.2 International Building Code (current edition).
I HEREBY CERTIFY THAT I HAVE READ AND EXAMINED THIS APPLICATION AND KNOW THE SAME TO BE TRUE UNDER
PENALTY OF PERJURY BY THE LAWS OF THE STATE OF WASHINGTON, AND I AM AUTHORIZED TO APPLY FOR THIS PERMIT.
BUILDING OWNER
Signature:
Print Name: ../.::)4461 N
AGENT:
Mailing Address: /3I ..( f44� J i —r
Date: S� - 2-Z- — $ Y
Day Telephone: L s ? (- b 7Z S co
•
City
354-)
State Zip
H:\Applications\Forms-Applications On Line\2012 Applications\Fermit Application Revised - 2-7-12.docx
Revised: February 2012
bh
Page 4 of 4
DESCRIPTIONS ACCOUNT QUANTITY
PermitTRAK
PAID
$5,001.82
D14-0155 Address: 350 MIDLAND DR Apn: 8836500100
$5,001.82
DEVELOPMENT
$4,854.84
PERMIT FEE
R000.322.100.00.00
$2,939.60
PLAN CHECK FEE
R000.345.830.00.00
$1,910.74
WASHINGTON STATE SURCHARGE
B640.237.114
$4.50
TECHNOLOGY FEE
$146.98
TECHNOLOGY FEE
TOTAL FEES PAID BY RECEIPT: R2188
R000.322.900.04.00
$146.98
$5,001.82
Date Paid: Thursday, May 22, 2014
Paid By: WAYNE'S ROOFING, INC.
Pay Method: CHECK 8421
Printed: Thursday, May 22, 2014 12:56 PM 1 of 1
sr Ass
INSPECTION RECORD
Retain a copy with permit
PERMIT NO.
CITY OF TUKWILA BUILDING DIVISION
6300 Southcenter Blvd., 41100, Tukwila. WA 98188 (206) 431-3670
Permit Inspection Request Line (206) 431-2451
Proj4ct: J�
-Y
TypeJ, k.
j At
Add ess:es
Date Ca! d:
Special Instructions:
-3
Date Wanted:
rr-S -f
a.m.
Requester:
Phone
.3-
-5
proved per applicable codes. 0 Corrections required prior to approval.
COMMENTS:
p 'r ca (knft aP
ins
Date:'
REINSPECTION FEE REQUIRED. Pn to next inspection, fee must be
paid at 6300 Southcenter Blvd., Suite 100. Call to schedule reinspection.
WAYNES ROOFING, INC.
13105 Houston Road
Sumner, Washington 98390
(253) 863-4455 (206) 575-0078
FAX (253) 863-8311
WE ARE SENDING YOU
Shop Drawings
Copy of Letter
3
3
X
LETTER OF TRANSMITTAL
DATE ## t46 ilt c/1 + ` 1 .104Q.14-d37
ATTENTION Karen Yarber
RE:
Prologis Park Tukwila 5 - Midland Bldg #1
Tukwila, WA
---------._._.-------------
HAND DELIVERED
Under separate cover via
! Plans/specs [-I Samples
Attached
Prints
Change Order
Manufacturer's 10 Year Roof System Warranty
Manufacturer's Care & Maintenance Information
Roofing Contractor's 2 Year Warranty
THESE ARE TRANSMITTED as checked below :
For Approval
[X ]For your use
rX As requested
For review and comment
FOR BIDS DUE
Approved as submitted
Approved as noted
L__i Returned for corrections
The following:
Resubmit
]Submit
[IJ Return
19 J 1 PRINTS RETURNED AFTER LOAN TO US
REMARKS
Find attached warranties for the subject project.
myself if you have any questions.
COPY TO: Job File
RECEIVED
Please contact either JOITIR5IF Qr ,kWI�
NOV 10 2014
PEf, I' 7: f CENTER
Thank you
SIGNED BY:
Don Guthrie, President
.55
:.',1Narranty.'No::RBTG3541: :: , `•; ; ...... `• :PBPCO. DC848t ' • :• {.::.' S4Uare Foo1~a84t
::Quild4ng:Owner::PROfX,GIS;Ch::':.•;;..,,J; :•••':•C'
:'.Bulidin�',Ideatifii atiorr:: PROLOGIS PARI( 7UKWLGA'S ='MIDLAND
:•Bu,lditlg-:Addefifv ip- 6Q INIDtJ1NDgtf4V�;.*VKiNll�flt. {iVAt'.' 61�.8, 0000: ; :':•
1NJ3'rrantlf•Period Offi: TEN(10)•Years,'�..egibning Grl} 07/08114. ;:'::':•
. , R:oofifj0 Contractor:.*AYNES ii.QOFLNG,i1'4j:
:Far;tht;wananty period;irirllceted;'above Flrestcinea;urldih'g Pred• u5t9 Co.mpany,:L'CG i^Firestone",), en,Indiac a timited liapilityCbinpany,,-warrants te the btilidln
4 . •
0w'ner•("0wrl'er') nalned'atiove that fi• ' • •ti;•' • subject to'the Tprfrts;'' - *- • io • • • • • • - • • ti• ' • • ' fcar•••• • Jbvs,.Yepair any {ea• • i• • • • • Fifestdne:Roofirig :. -;
•, :: ';: .'.' : ; ;? :':: :; :;; ; r':':':"'''i: :` : ': :: •'' ?: :•' : :: . • ;:.. ..
"TERMS; CONRITI�NS.%4NP .14MITATIQNS: • '..
pfodoCtS Covered..Te•Systerri•shatf mean•,orilf<the'.Firestoneptarid•robfing'hiembrdnes,•Firestone.,brarid:reafNg'insulation,5,:F1Yestb.h: brafjd•'r.Dotigg: ;
:.rlpetai;:ani# other:firestonebrand•'rogfm-g:- ccessori6>s;Witeh, instalied•irr,eCcdrdante with:Firestone:technical: specifjcatiobs'by a Firestone•Iieen'sed :' •;: •':
'X.: • : In :ttie'event•ahy:leak shoriid o'cgir in•the5y5tem,'the'Oryher•rhpat ghte •notice' in:ivriting• of by:teleptiorre:to: Fke trine with in:thlrty;(30}bays
;any doctlrtente•bfa:leak.: Written notice.rnaybe tent to:fiiestone:at'th;e ttteet address'01- f x rwtnber shown on. the'revers:e:sid'e:cf this.Limited :; :: :
Warranty_'=Evidence, of. this' notice:shalt; tie• the:recerptby0s%•inei.bf a.Flrestolre:Leak'Nofifi ationAcknowledget,"Bysb.irpt ing'Firestone;the.0Wrner•
aUthoiiies Firestbne of itt designee to inVestigete thecatise of:the teak:; -; : •'• • .: ' : ;:::. ,:. ::men
• •
.;: jgvgsfinat[op :,if :tifxin inriestigat(on;Fivestone deterriunes::
that the Irsak. is ;not.e)ictudetl under'tkieTej m5; ConilR;ois s ,and tirrlitatigns; set, forttj,iri ibis• ' ,•
:Red•$hleld: Rpofing-SyS,tem Limited' Warranty -(the :Umited: Warranty");.:the Owners. sole'andeXclusive te,'niedy anal•Fiiestone.s total. ltab'ifltYSha1I be• .'.
limited'to•tha rej.�air'or.theleek',,Sfto;uldthe inveafrgation'rbJealak that the.leIS- X 'ude¢,Untfer tte.TeitS:.•C6ndittons and l irrittatoris, the.OwnEr; snap ¢e':.•
;respohsIlife:for pagment,ofthe investigation•costa.--Faihire by;Owner•Jopay for these cost5sbafl'render'this Lltnitert Wartanty'.null and boil; •Fiiestone wfl :. •
.•adyisethe:0 Wrier of ttte type arid)or-extent of,repaiis'regiiited ttr be:lade at th'e•OWner:s- ezperrye:that :will:pemriit :th iS Lirniited' W arr-anty,'•to •rem i In •in'; :. :
:effectfoi: tMe-' upexpired: portion of• its: ternl, : Fail,u re'by the Ojvrie'r•to; prgperly nialie-these rerla>rs i na .reasonable •man rler ustrtg'a: Firestone-(itefsed-•::: ;
• -•applicator•Anti Within 60'tlays sha(I Yender.this •Litnited' Wtrty arra..null: anti:void:::. '.: • •'::'•: • • : `• : :
�oltai:LjtnIt (.NDL}: There i;: no: dollar limit plabed ot;:warrantetl-teak repairs:to the a rent;sutfr repairs are'cbvered byt its i imited'Watrarity:. , - -
prttfu'ta{,:Any.dispire, :controversy•or.clarm:befween fheawner,aria'EirestOne.ctjncernigg'ti)ts Liritited•.Warranty.sttallbe•Settled by.mediatlon- In the •.
:•event:that the O:ivaer anrl.Firestone do not tesofve•the dispute,. cobtroi ersyor claim in mediation; the•Owner• and -Firestone; agree: that neither:party
.tormmeoce.or prosecute any, sUit,:puoceedrng,•or •claim:otherthan in.the: courts: of }{antdton County, trrtiie StatC.of Indiarra.or tlle'ljnited States piston','.'
":Court, SO.utherri•'0istris;E bf Indiana, •J7id'ianepolis brvis ob;; Each party irrevocably consents to•tbe'Iufigd coon:and-venye: of the above: idenYified.cbtxt5, :
'Talm:ent)Reauire4 FlrOstone, shaft'h}ve•oo,pliijgatiort underth1s:Lir}iitgdWarrahtydoles ..ant until:Firestone,and'it(eJicenseda'pi}lic@tot•hay6•peen.'.••.
-paid ih full tor.alt materials,•s.Upprres,.services; approved:written,change.orders, •warranty tbsts;3nd•otliercosts\irliich.ere-included In,:oriaaidental.to. the:
:.•System: •tn:the event'that: repairs• rot' covered: by this limited' War(antiFre necessary in tfle fotue Firestone reieti/es.the-1-.kjht ib'suspeott this :LitnitCd:: :
•:'Warranty:until:yuch,repairs'Jaavebeeh:4ompletCdand.theJfcensed-app)rcatbradcllor•Firestone•Ilasbeen;paidin'full.fp-r•sdch'repaits: •::;' .;:• '. • •
'.J tlµifionS,:Firestone'shaflhveifp:obligjtion.under:thls•L:ihiited.Warranty,,dr: anyOtherljalrltj,:xiow:orJt)the.futureif.a:lealior.Qama e'isceused=by::-
;(a) Naturpt forcas;: disasters;:or•acts bf God ancJ;ud rig; but: not limited io;' fires;:h{iri ies,;•tomatloes; Mai( wind blown:delzris; iiglttrtingi'eartlrpyakes; • •:,:
%;Okehic8Ctivrty; atomicradi.ttion;, in;ects.dr.dniiiials •(b);,Winds'et akguist speeddt or•iri'e)icess'oT 5Br1'c'N 4akutated:af'.ten(1p) meters above• ground:':
ysifg•available..rfieteofoldgicai•data;(t),•get('s), conef rct'or:omi5sron(s� by,any;person; bf;acf(sJ'ot war; keg-tortsm or. LaSdetispa; Wfich•deFilage Eh'e;System
brwhich' lrnpair:the System 5' abilty.to;resist leaks td) Failure; by the opener to use reasonabietare;in,maintainftio.the.Systtrn, Said nlaintenanceto'
hdpde; put_ not•be:uri)ited to, those Items listed an the' reverse.slde ofthis•kirrtltedWarranty entitled "Byildirtg Envelope Care encl. ttaintene'nce.toid-et;:.'•
'Eej.Deterioratiop.dr'falure:of buttduig tgtrtppr)ents; includiirg, b'uthot grhiterl•td;,tte:rooFeubsti-Me;;waria; mortar; HVAC units, skylights etc (F) :'•,•'•
• _Cpnstruotion •generated ;rhoistuie; condensation :or infiltration of moisture jn; (Rini; through; -or a reund-the Walls,: copings; :rooftop hardwarer oegi ipmeht;-
:.skylight's, building.Structure:or:undeMying.or:surroijnd'rog•inateriais; (g.):Ac{d; Qi6,•hamiful'chit tcals, or the _teattiorl'betri¢en;theni;:(h):Aiteratjob's,or'?:
;'.repairs,'to •tJtE System that'are riot �prnpfeted in, accordance with,f`irestone'epul}fishejl specifications; not nompleted.by: an. approver) •tontracto r',and/ttr.pot
• 1completed _iyith'prdper notice' to Firestones,'.(1).Tie-tlesiOa of the. roofing:tyCtemFirestone:tkies riot undertake'env. jnaiysis of. the' ardhitect(rie vr.•::.::: :
:••.enylneereng; ragulretl, to:Po60pl14d es•tn ttje •S,µita{ijli[:y:UE'its
:• Products-fDr•arry'parttoularttruottlrec5ti h•'a•deterrtitnatigtOs,the•retdonaibllfy ofthe ignitett,• engineer bi c(eSign'professional;• (j)' Irrlproiier:Selection lg.'.
niaterials•'for•the. roof asaenAiy.Or the;faiiur•'e• to a4cuTate1y, cafcbfate wing ;upljftarid/or, reef los;(k •:Deterioration: to rijetal:rpolfimbte'riale and:: ':.'''• :
• agesSoriescaused•byMarinle'saltwatet'atmosphere;,orby-Yegitarspray.of'erther. salt. or fadresh'wate,or{I);Ciange•irttiblldrnng gUse•tlr{iylrpose:.
7, transfer.. This 'Lirfiited:Warrantysh011bet'ransfetablesubfettto.Owner;spaymentdf• the. 4uireiltton ski- .fe8•set. tiy•FiieStgne...• .•
I; Terms The teriti.Gf'tflis �iri ited. Warranty: anal) :be;Tgr:theperiod set;frirtti atibve.and;such'terrfi:sot•be exterWed,Under any• circturristanc:es
•/tool:litcpta During• thkteriri'of this Lin iited Warranty;'Firestone's dedignated'rephali'n
resentetive pr; empiorjees shall have; free actess to the.roof durJng
::.regularbyskress-hocrt.:: Tp.the event•that, rr,of:acpess'iS'•Iimiteddu6116.se6rity:orotheerestrietior)s; OWnet6hail.reitnbtn;a:Firestone•for.all'reasopable'•
m Cott;idctirred dvring• inS'pectipn•and-/or repair of'the Sysie.that 'pre due;to delays:associated:with teid rest,rtitibn*: ,OWher shaft be respphsibte'for'the
:defnacaused•by: removal aiid rfacernent-o1 any joyerburdeii5; `superstrata or overia,g5;, either fiermanent: or.i erjtporary:; excluding; atbepted :stone :: :
• ::•.baf)asge t orpaversy,as.necessery to:epexpose:the'Syiteih:for-inspection andfor repari:,-:,:,• • r :.
1'0.:'• Waiver‘"Firesone"s Tallure.to enforce:any of.the teim$ b'r:coitlitions:stated.herejn shall' noe co t• bnstr ieti.as:a:.Waiver of: such,-p'rb'vfsiodbr•bt any other •'
:_;terrtr5'aridcpnditiorisofthieLimitedWarranay:.: r.':'•':::.'.'';.` .:•r.''.':.'. :.'
41•. . •GavernidQ Lgrpr: ; This Limited Warrarlty�halt• be •governed by: an'd -constrlleti,in •atcsrdante -with •the, laws:of.the: State, of fndja'na Withtlut;l egard'td. tire[
.:State's rules'on conflict of laws:._.. .. .. '..... - .: .:. :. • :: .. ; .'• . ,
::Rpepr•�bflity. Tf•ariy.portlarJof.this:LimitedWarranty•istreid:by a court of Competent Iurlsclictfon.tobe:invalid vodor:unenforceable,the:remafnjng'
.:provisions Shall:nevertheless••oontlnue'•in:fuli forGG,;•.••• • :::.::: :: •• :'. • + :. :: :' :. ::.:. ..:
''.FIRESTONE00E5•NOT`WAP.FA41T;P,ROO1(1OTS'I'NCORRO icib-Oji.UYIt1PEUIJu HIS INjiALL�lt7.INNTHATWER1Not EIjitriis DBYiiREStONE,''•,
•:FIRESTONE:SPCIFICALLY:D1Stikt•4S-LIABILI'71:•IJNDER'ANY'TREORY•OF. (.AW AR•15INGOtit
.t)F:7FIF.INSTALLA-TTON OF PER! OitMe1NCE, PF; Olt.
DAMAC •3511STAt54 O BY. 1 CaUS0b,BY:'PROD00-S;NOT;KURN1SH0YBY:F•IRESF0,NE:::: '. ::::': • • - ::.•-':.• ::. •::::•• : {.::.:..', ::'.
THiSUMIT1;DW.ARPANTYSLiPER Ep S:A1-QI•S NLSE,U'O,FAlt:QYN£I;W(AIZRANtI 01;M✓R4hANTAB}L�T1 ftNq•F rNE$SFORAPAiZTIOJAit•PURPO5,,
:,:ANFi.VIRE5•TONE:1IEREBY•l${S-CLAIMS:AI;{:,SUCH'WARRANTIE$-TH•ISUM•I,T•ED•WARRANTYSHALL•TSE;t.H OWfitERS•SOL'E'ANIS.6xcLQSI•yF•REMEIvy . :•.
:AGAIN ST,-FiRESTONE,..ANip .FIRE$T.ONE•SHALT.NA7.8ELIABCE FORANY.CONSEQUBNTIAL,:SPECIAL;SNCjO6NTAL•QRpTNER.DAMAGES'INCLUDIN6;.BUT •;
.::PIOT.'L•IMTrE070,:LbSS:0j='PROF11:5OttDafs.ig 0:TciTHi:to:raNJGi3RFtS•toNTE;Nts.ORWE,R00(.D CK;'.THt.LIMIDPDtsigkR•PITY-CAtiiND:1',BE..•
'AMEN•DEC,:AL:TE•RRb,'OR:MODIFIED:IN AFPf WAY• EX 11IN WP11-11VGSI•l;NED NY:AN AUT4IORIZ•E) ;oFttEi2.OEST F•FIR5ss-.E.., -10 0T41Eii.RERSON,HAS ;
AUTHt�}t17Y;TO.erND PIREST0,NE' WSTti-ANY:R4PR'ES,E[ITATI0fit. SSW W!�•RR,4NTt!WHETH)=ft:OfiAt.'OR Wj(IIi:F.N.:• :' •::; • _i : • ::.;.' .'.:; • _ •-:
FIRESTONE BUIL•DING: PRODUCTS: COMPANY,;LI C
'Firestone
BUILDING ENVELOPE CARE AND MAINTENANCE GUIDE
(For Red Shield Warranted Roofing Systems)
Congratulations on your purchase of a Firestone Roofing System! Your roof is a valuable asset that should be properly
maintained. All roofs and roofing systems require periodic Inspection and maintenance to perform as designed
and to keep your Limited Warranty in full force and effect.
1. The roof should be inspected at least twice yearly and after any severe storms. A record of all inspection and
maintenance activities should be maintained, including a listing of the date and time of each activity as well as the
identification of the parties performing the activity.
2. Proper maintenance and good roofing practice require that ponded water (defined as water standing on the roof
forty-eight hours after it stops raining) not be allowed on the roof. Roofs should have slope to drain, and all drain
areas must remain clean. Bag and remove all debris from the roof since such debris can be quickly swept into drains
by rain. This will allow for proper water run-off and avoid overloading the roof.
3. The Firestone Roofing System should not be exposed to adds, solvents, greases, oil, fats, chemicals and the like. If
the Firestone Roofing System is in contact with any such materials, these contaminants should be removed
immediately and any damaged areas should be inspected by a Firestone Licensed Applicator and repaired if
necessary.
4. The Firestone Roofing System is designed to be a waterproofing membrane and not a traffic surface. Roof traffic other
than periodic traffic to maintain rooftop equipment and conduct periodic inspections should be prohibited. In any
areas where periodic roof traffic may be required to service rooftop equipment or to facilitate inspection of the roof,
protective walkways should be installed by a Firestone Licensed Applicator as needed to protect the roof surface from
damage.
5. Some Firestone roofing membranes require maintenance of the surface of the membrane:
a. Smooth -surfaced Firestone APP membranes should be coated with an approved liquid coating, such as
Firestone Aluminum Roof Coating or Firestone AcryliTop applied in accordance with Firestone specifications, in
order to maximize the service life of the membrane. If this coating is not applied as part of the initial roofing
installation, it should be applied within the first five years after the roof is installed to help protect the
membrane from surface crazing and cracking. In addition, this coating should be maintained as needed to re -
coat any areas that have blistered, peeled or wom through.
b. Granule -surfaced Firestone APP and SBS membranes do not normally require surface maintenance other
than periodic inspection for contaminants, cuts or punctures. If areas of granular loss are discovered during
inspection, these areas should be coated with Firestone AcryliTop or other Firestone -approved coating applied in
accordance with Firestone specifications.
c. Gravel -surfaced Firestone BUR membranes do not normally require surface maintenance other than
periodic inspection for contaminants or damage. If areas of gravel loss are discovered during inspection, gravel
must be reinstalled into hot asphalt to protect the surface of the membrane. Coatings on smooth surface BUR
membranes must be maintained as needed to re -coat any areas that have blistered, peeled or worn through.
d. Firestone EPDM and TPO roofing membranes do not normally require surface maintenance other than
periodic inspection for contaminants, cuts or punctures. Occasionally, approved liquid roof coatings, such as
Firestone AcryliTop, are applied to the surface of EPDM membranes in order to provide a lighter surface color.
Such coatings do not need to be maintained to assure the performance of the underlying EPDM roof membrane,
but some maintenance and re -coating may be necessary in order to maintain a uniform surface appearance.
e. firestone Una -Clad metal rooting panels and trim do not normally require surface maintenance other than
periodic inspection for contaminants or damage. In addition, periodic deaning of the surface may be required to
remove dirt and maintain the aesthetic appearance of the coated metal. Simple washing with plain water using
hoses or pressure spray equipment is usually adequate. If deaning with agents other than water is
contemplated, several precautions should be observed: (1) do not use wire brushes, abrasives, or similar
cleaning tools which will mechanically abrade the coating surface, and (2) deaning agents should be tested in an
inconspicuous area before use on a large scale.
6. All metal work, including counter-flashings, drains, skylights, equipment curbs and supports, and other Firestone
brand rooftop accessories must be properly maintained at all times. Particular attention should be paid to sealants at
Joints in metal work and flashings. If cracking or shrinkage is observed, the Joint sealant should be removed and
replaced with new sealant.
7. Any alterations to the roof, induding but not limited to roof curbs, pipe penetrations, roof -mounted accessories, and
tie-ins to building additions must be performed by a licensed Firestone Licensed Applicator and reported to Firestone.
Additional information and reporting forms for roof alterations are available at www.firestonebpco.com.
8. Should you experience a leak:
(a) Check for the obvious: clogged roof drains, loose counterflashings, broken skylights, open grills or vents,
broken water pipes.
(b) Note conditions resulting in leakage. Heavy or light rain, wind direction, temperature and time of day that
the leak occurs are all-important clues to tracing roof leaks. Note whether the leak stops shortly after each rain
or continues to drip until the roof is dry. If you are prepared with the facts, the diagnosis and repair of the leak
can proceed more rapidly.
(c) Contact Firestone Warranty Claims at 1-800-830-5612 as soon as possible...but please don't call until you
are reasonably sure that the Firestone Roofing System is the cause of the leak.
Firestone feels that the preceding requirements will assist you, the building owner, in maintaining a watertight roof for many years.
Your roof Is an Investment, and maintenance is essential to maximize your retum on this important investment.
'Firestone
BUILDING PRODUCTS
NOBODY COVERS YOU BETTER"
250 West 96th Street — Indianapolis, IN 46260
1-800-428-4442 * 1-317-575-7000 * FAX 1-317-575-7100
www.firestonebp.com
s
irestone
BUILDING PRODUCTS
NOW THAT YOU HAVE
A NEW FIRESTONE
ROOFING SYSTEM...
Congratulations on your purchase of a Firestone Roofing System! Your new roof is a valuable asset and
as such should be properly maintained. All components of the building envelope require periodic
maintenance to perform as designed. "Building Envelope Care And Maintenance Guide" printed on the
back of your Firestone Limited Warranty contains a number of important items to assist you in maintaining
a watertight building for many years. These maintenance guidelines recommend that the building
envelope be inspected at least twice yearly. Although this inspection can be performed by any qualified
person selected by you, Firestone recommends that at least one inspection every year be
conducted by the Firestone Licensed Applicator who installed your roof.
Whenever an inspection of the roof is performed, Firestone recommends that the following items
be included:
1. ROOF CONDITIONS REQUIRING PERIODIC INSPECTION:
Periodic inspection of the following items is very important to assure that the Firestone Roofing System
has not been exposed to conditions not covered by Firestone's Limited Warranty:
a. Roof Traffic & Walkways: The Firestone Roofing System is designed to be a waterproofing
component —not a traffic bearing component of the building envelope. As stated in Firestone's
System Design Instructions for all Firestone Roofing Systems, "Walkways help protect the
membrane from damage due to necessary roof -top service traffic." Please note that walkways
should be maintained at all roof access points, around all mechanical equipment which requires
maintenance and at all areas where roof traffic more frequent than once a month is anticipated.
If, because of traffic requirements, walkways need to be installed on your roof, contact your
Firestone Licensed Applicator before proceeding.
b. Discharges: All components of the Firestone roof system must be protected from discharges,
such as petroleum products, greases, oils and fats, acids and the like. If the building will have any
such discharges, please contact Firestone for suggested methods of protection. If, because of
the presence of chemical discharges, protection measures are recommended, contact your
Firestone Licensed Applicator before proceeding.
c. Ponding Water: Proper maintenance and good roofing practice suggests that ponded water
(defined as standing water on the roof forty-eight (48) hours after it stops raining) should not be
allowed on the roof. Roofs should have slope to drain and all drain areas should remain clean. If
ponded water areas are observed on the roof that cannot be corrected by periodic cleaning of
drain areas, contact your Firestone Licensed Applicator for suggestions.
d. Storms: The building envelope should be inspected after any severe storm, especially after any
storm that involves high sustained winds, heavy wind gusts or tornado-like conditions. All roof
surfaces should be inspected for damage caused by wind-blown debris. The roof also should be
inspected after any hail or ice storm which could have damaged the roofing system. If storm -
related damage to the roof system is observed, contact your Firestone Licensed Applicator
before proceeding.
e. Moisture Infiltration: It is very important to inspect the roofing system for moisture infiltration
from sources excluded by Firestone's Limited Warranty. These sources can include but are not
limited to:
1. Latent moisture in a pre-existing roofing system or roof insulation remaining beneath the
Firestone Roofing System.
2. Moisture infiltration in or through building walls, copings, mortar joints and roof -top
equipment.
3. Condensation of water vapor within the roofing system due to temperature and humidity
differentials.
Because inspection for moisture infiltration requires professional roofing experience, Firestone
recommends that this inspection be performed by a Firestone Licensed Applicator at least once
a year.
2. NON -FIRESTONE MATERIALS:
In some instances, non -Firestone supplied materials are used in conjunction with Firestone Roofing Sys-
tems. These materials may include, but are not limited to the following items:
a. Locally -fabricated sheet metal flashings.
b. Non -Firestone sealants at roof terminations.
c. Non -Firestone roof insulations.
d. Non -Firestone insulation fastening devices, including but not limited to roofing screws, insulation
plates, construction adhesives and roofing asphalt.
e. Preservative -treated wood nailers and blocking.
f. Roof drains and drain inserts.
g. Pre -fabricated roof curbs.
h. Concrete walkway or ballast pavers.
Stone ballast.
j. Non -Firestone roof coatings.
Because such items are not warranted by Firestone, it is important to establish an ongoing inspection
and maintenance program to assure that the performance of non -Firestone materials does not adversely
affect the weathertight integrity of the Firestone roofing system. Sheet metal items should be checked
for weathertightness and re-anchored/recaulked as needed. Nailers and blocking should be checked for
soundness, and replaced or re -secured if necessary. Roof drains and drain inserts should be cleared of
any debris. Sealants should be inspected for shrinking or cracking and replaced as required. The
integrity of roof insulation and insulation attachments should be verified. Walkway pavers should be
checked for cracking or splitting and replaced if necessary. Ballast stone should be checked for
deterioration due to freeze/thaw conditions. In addition, all ballasted roofs should be inspected for
localized wind displacement of the ballast, especially along perimeter roof areas. In the event ballast
displacement is observed, the ballast should be carefully re -dispersed uniformly and the addition of larger
ballast stones should be considered.
3. FIRESTONE PRODUCTS REQUIRING PERIODIC INSPECTION:
Although Firestone products do not necessarily require periodic maintenance to assure long-term
performance, periodic inspection is very important to assure that these products have not been exposed
to conditions excluded by Firestone's Limited Warranty:
a. The Firestone Roofing Membrane should be inspected for tears or punctures caused by wind
storms, falling objects, roof traffic and the like. If the Firestone membrane is supplied with a
factory applied coating, such as roofing granules, the coating should be inspected for any
discontinuities caused by abrasion from wind, roof traffic or other sources. Tears, punctures and
abrasions to the membrane must be repaired by a Licensed Firestone Applicator using
Firestone specified repair procedures.
In addition, the membrane should be inspected for any contamination from discharges, such as
petroleum products, greases, oils and fats, acids and the like. If any such discharges are
observed on the membrane, please contact Firestone for suggested methods of protection. If,
because of the presence of chemical discharges, protection measures are recommended by
Firestone, contact your Firestone Licensed Applicator before proceeding.
b. Firestone Wall Flashings also should be inspected for tears, punctures, abrasion and
contamination from discharges, following the same procedures as for the Firestone
Roof Membrane.
4. INSPECTIONS AND SAFETY:
Inspection of any building envelope should be undertaken only by qualified persons who are familiar with
safe practices, including all applicable occupational health and safety regulations relating to roofing and
construction. Firestone recommends that all roof inspections be performed by a Firestone Li-
censed Applicator or a similar roofing professional.
5. ARRANGING FOR PERIODIC INSPECTIONS:
Please note that the cost of periodic inspections, either by your Firestone Licensed Applicator or by any
other roofing professional, are not included in the cost of your Limited Warranty. Firestone recommends
that you contact your Firestone Licensed Applicator to obtain a proposal for inspection and maintenance
services.
Firestone feels that the preceding recommendations will help you maintain a watertight building for many
years. To maximize your return on your building investment, appropriate care is essential. Whenever you
have questions concerning your roofing system, do not hesitate to contact your Firestone Licensed Appli-
cator or your local Firestone Sales Representative.
6. ADDITION OF PHOTOVOLTAIC (PV), GARDEN, OR SIMILAR SYSTEMS:
Not all roofing systems are configured in a way that allows them to accept photovoltaic (PV) systems,
garden systems, or other above -membrane additions. Prior to installing any systems over your Firestone
roofing membrane, you must contact Firestone Quality Building Services group at 1-800-428-4511 for
review of the roofing system's readiness for accepting above -membrane systems.
Firestone feels that the preceding recommendations will help you maintain a watertight building for many
years. To maximize your return on your building investment, appropriate care is essential. Whenever
you have questions concerning your roofing system, do not hesitate to contact your Firestone Licensed
Applicator or your local Firestone Sales Representative.
Firestone Building Products
250 West 96th St., Indianapolis, IN 46260
Corporate Office: 1-800-428-4442 • 317-575-7000
www.firestonebpco.com
Firestone Building Products Canada
2835 Argentia Rd., Unit #2
Mississauga, ON L5N 8G6
1-888-292-6265 • 905-363-3150
Fax: 877-666-3022
International Offices:
Firestone Building Products Europe
Ikaroslaan 75 - 1930 Zaventem, Brussels, Belgium
+32 2 7114450 • Fax: +32 2 7212718
Firestone Building Products Latin America
500 E. Broward Blvd., Suite 1500
Fort Lauderdale, FL 33394
954-768-1140 • Fax: 954-768-114 I
Ro )fing G iararr :ee
Whereas, WAYNE'S ROOFING, INCORPORATED, of Sumner, Washington,
herein called "the Contractor," has completed application of the following roof
Owner:
Address of Owner:
Type and Name of Building:
Location
Area of Roof:
Date of Completion:
Date Guarantee Expires:
Prologis, LP
12720 Gateway Drive, #110, Tukwila, WA 98168
Prologis Park Tukwila 5 — Midland Bldg. #1
350 — 360 Midland Drive, Tukwila, WA 98188
74,100 Square Feet
July 8, 2014
July 7, 2016
Whereas, at the inception of such work the Contractor agreed to guarantee the aforesaid roof against
faulty materials or workmanship for a limited period and subject to the conditions herein set forth:
Now, Therefore, the Contractor hereby Guarantees, subject to the conditions herein set forth, that
during a period of TWO (J years from the date of completion of said roof it will, at its own cost and expense,
make or cause to be made such repairs to said roof and composition flashing resulting solely from faults or defects
in materials or workmanship applied by or through the Contractor as may be necessary to maintain said roof in
watertight condition.
This guarantee is made subject to the following conditions:
1. Specifically excluded from this guarantee is any and all damage to said roof, the building or contents caused by the acts or
omissions of other trades or contractors; lightning, windstorm, hailstorm, or other unusual; phenomena of the elements;
foundation settlement; failure or cracking of the roof deck; defects or failure of material used as a roof base over which the
roof is applied, faulty construction of parapet wall, copings, chimneys, skylights, vents, supports, or other parts of the
building; vapor condensation beneath the roof; penetrations for pitch boxes; or fire. If the roof is damaged by reason of any
of the foregoing this guarantee shall thereupon become null and void for the balance of the guarantee period unless such
damage is repaired by the Contractor at the expense of the party requesting such repairs.
2. The Contractor is not liable for consequential damages to the building or contents resulting from any defects in said roof or
composition flashing.
3. No work shall be done on said roof, including, but without limitation, work in connection with flues, vents, drains, sign
braces, railing, platforms or other equipment fastened to or set on the roof, and no repairs or alterations shall be made to said
roof, unless the Contractor shall be first notified, shall be given the opportunity to make the necessary roofing application
recommendations with respect thereto, and such recommendations are complied with. Failure to observe this condition
shall render this guarantee null and void. The Contractor shall be paid for time and material expended in making
recommendations or repairs occasioned by the work of others on said roof.
4. This guarantee shall become null and void if the roof is used as a promenade or work deck or is sprayed or flooded, unless
such use was originally specified and the specification is noted in paragraph 8 below. Areas that pond water shall not be
covered by this guarantee.
5. This guarantee shall not be or become effective unless and until the Contractor has been paid in full for said roof in
accordance with the agreement pursuant to which such roof was applied.
6. This guarantee shall become null and void unless the Contractor is promptly notified of the alleged defect in materials or
workmanship and provided an opportunity to inspect the roof.
7. This guarantee is in lieu of all other guarantees or warranties, express or implied
8. Additional conditions or exclusions: Includes new sheet metal flashings, gutters, skylights, and related work installed with
new roof system as a portion of roofing contractor's work scope.
In Witness Whereof, this instrument has been duly executed this 24th day of October, 2014
BY
WAYNE'S ROOFING, INC.
13105 HOUSTON ROAD
SU1IrINF , WyA�SHINGTON 9S390
TAC'. 4 S'EA.206jgS 7
AUTHORIZED PRESENTATIVE
Donald Guthrie, President
Wayne's Roofing, Inc,
13105 Houston Road
Sumner, WA 118390
www wamesrooling.com
SUBMITTALS
Section 07535 Elastomeric Membrane Roofing
PROJECT
Midland Buiding # 1
350 Midland Drive
Tukwila, WA 98188
PREPARED FOR
Prologis
12720 Gateway Drive, Suite 110
Tukwila, WA 98168
May 14,2014
REVISIONS
No changes shall be made to the scope
of work without prior approval of
Tukwila Building Division.
NOTE: Revisions will require a new plan submittal
and may include additional plan review fees.
REVIEWED FOR
CODE COMPLIANCE
APPROVED
MAY 3 0 2014
BUILDINGf � ��
ISION
FILE COPY
Penult No. _ 1rt 0I
CC
Plan review approval is subject to anors and omisaior s.
Approval of construction documents does not authorize
the violation of any adopted code or ordinance.
R cpt
of approved Field � � 16 { is acknowledged:
BY
DIE G
My Of lbkwila
WILDING DIVISION
RECEIVED
CITY OF TUKWILA
MAY 2 2 2014
PERMIT CENTER
tt.k-155
WRI PROJECT 14-037
SUMNER (253) 863-4455 SEATTLE (206) 575-0078 FAX (253) 863-8311
Wayne's Roofing, Inc.
13105 Houston Road
Sumner, WA 98390
wwwwavnesroofina.com
N4thES WWIIS4G, NI.
Midland Building #1
DRAWINGS
• Roof Plan
• System Descriptions
1
PRODUCT DATA 2
• Roof System Product Data
CERTIFICATION 3
• Approved Applicator Letter
• Roof System UL Rating
WARRANTIES 4
• Manufactures Sample Warranty
• Contractor's Sample Warranty
April 18th, 2013
WRI PROJECT 14-037
Wayne's Roofing, Inc.
13105 Houston Road
Sumner, WA 06300
www wavnesrooflna.00m
DRAWINGS 1
� Dats 5/14/15
b
8'-O
.
Field Layout
6/BD
b
8'-O
.
Perimeter it
Corner Layout
8 FAST/8D
INSULATION FASTENING PATTERN
Insulation Data
Bottom ( Middle
MANUFACTURER
N/A N/A
Top ..1
Firestone Bide
Products
TYPE
WA I WA
THICKNESS
n/A I WA
15'
R - VALUE
NO. OF LAYERS
ATTACHMENT
N/A
n/A
WA.•
N/A
WA I WA
FASTENER TYPE
WA I WA
FASTENER LENGTH
WA I N/A
R8'3
1
Screwsrllotes
Firestone AA
Purpose
BOARD SIZE
N/A I N/A
48'x96'
FIELD FAST'G
N/A 1 WA
6
PERIMETER FASTG
CORNER FASTG
N/A I N/A
N/A 1 WA
8
FM REG. (Pattern Only)
WA I WA
WA
• r r r r.
Wayne's Roofing, Inc.
13105 Houston Road
Sumner, WA 92390
NEW Firestone 60 Mil TPO Membrane
Induction Welded Assembly
NEW --Firestone All Purpose Screws
and Invisiweld Plates
6 ea in field, 8 ea @ perimeters (12 ft)
8 ea @ corners
New Firestone 1.5" 4'x8
25 PSI Resista (Coated Glass Facers)
Existing Prepared Aluminum Coated
BUR Assembly to Remain
5/8" Existing Roof Sheathing
Existing Batt Insulation
Sues G53) 6834465 Es )tea
Fax (25* 663.6311
Drown By
Joe D
Rev.
Midland Building #1
System Description - System 1
ScciljJob Nol®e N.7.S.
Section
Sheet
001
1 * RPTIGN of Ex+SrlAAri PAGE
GAP 5.`tFrLr-Lr ROGF
AEAPRME £ RR A FLYWGg7 [ELK
APPRO/ t 1T..• 1.75 LDS//F.
LESGRIPTIGN LF AEW RCCF
OVER (ET CAP *EC. PLR PIANISH ATP NSTALL GTE LAYER
Or I5" PGLYISP (15 PSI) R16O IMAL.ATlGN Aral FASTDMP
ATP (N) ACchANCAL L Y FASTEAEP REPFCRGEP 40, A1L
rr>=fUv1GF1_Asrz 5 - FLY AEAVRME W►m 4L RB 4T P
PLA5HI MP ACGE55GRIES PROVLE A M R S TO YR MA.
WAr gr* fr RAT' EWRMJTPE # F ROX WEI HT. 44
06/sr
I mat IE) GAMT MP FASGN M447ER114.5 A5 TEMP AP REMIT Law gar
EPEE MTH ZVA WW Awt4, TAB IAELIATYN cam If' wanly
HUTAW &AWGA AEU_ MR TErAM. NO 'Tr TYP. AT FfRACTFR
2 us- COT !Mt REMOVE RASP A AERATE N AREAS GP reac
PAMAEE Gft EXCE55 CEFLEGTLGN REPLACE f1,YwoGD, STRINSERS
AAP FG NsuArieN wan N:W MATERIALS PER 6P GIFIGArtaN5
AAP GG_E AREAS ro DE PPMTrEP GLANS nE PRE -DP
AEETAA6
5 REMOVE IMSEFLACHINS MP GMT STRP Ar G1/Rp5 AAV WALLS
FILL VOP AT TE MPNT!GNS MTH FILER WARP TO MATCH
miacress er (E) RO F AND PISr.LL AR CARRIER SEAL.
ri.RNiSN AAP INSrALL FLEECE OR APF'ROVEP PACKER WARP GN
TM WALLS AAP CLADS FRIGR TO fr rALLP45 TIE (N) FLA9iN3
MATERIAL,
4 F(RN191 AND N5r'i. TRIEFIG PROrrrT,GN PADS A HEREP TO
of (IV) AE7+IARAAE PER MR
5. RLN INSEAM 1 FASTEERS FERP WI ro THE PRP-4T GF
TT'E 5TRP4R5, (ISPG IIAI_F OffETS AAP 'PALER ROWS"
AETWEEN FILL SHEETS AT TIE Pr7RI►ETFR
6.. 6U17ER PJPA SIGN . LNT5 PER SMMiGM
7 REMOVE AAMRTEP FEAETRATk NS. GLASS AAP L4IAPAENT
PATCH IVIES N MCA MP NSTALL AIR HARRIER, r;RP HARRIER
WARP, RASP NS(LATIGN ATP hEW NEACRAIE AS 9'EGIFEP
O NSTALL GR4GCFT5 OM TTE Mat SPE CP ALL, CLRPS
• FLANISH AI+P NSTALL FACTORY TAPERED iNSLLATICH To FROVVE
R.GFE TOWARDS SUTTER ate TYPICAL AT PERR1ETER.
Jo Arw MVP 1-EFitR5 MTH AEACRA4E I R.f 5 ro ?(fir Pi'E5 MD OMIT
1ER FETAL AV 16"
u REFL.1GE RLLSTi-P EgAwry VENr5 WI171 (N) GL P MQ,NTPP
RLq`TGT' VENTS PER perm. Aus.
LZ FLFUb1 AAP N5TALL (Aj) i" PIAM AOM?4a0CLIT WITH GUrLEr TUX.
ELTON, ON,, 5TRAP5 MP GCPLG SfiASH MGM N AFFIRM LOL'ATY.N
f5 wIr LOST ITEM GGRE Ma( W FROVLE (N) SUWEP ROi F
GRAIN WITH I RTEat CLAP MP AGCE5SR/E5
NSW NO.
R-67
gl
MUM
Pri
&SUM
EE
wl—+s
WINS 11211
ROOF PLAN
li.
Nair sftz B SOLE 1' - w
/.
•
MIDLAND BUILDING #1
350 IAIDL.AND DRIVE
TUKWILA, WASHINGTON 98188
AAIB US LOGISTICS FUND LP.
SAN FRANSICO, CALFORNIA
••
CyberCon Consulting Inc.
and P.O. Sax 621832 rpCamwka
LRtl.ton, Colorado 80162-1832
84823 Qub•c St., Bldg. 3
'TELL: (307C 40 60020 111
•
0
•
•
■
•
Vart. eleiciki
(N) SINGLE PLY
MEMBRANE AS --
SPECIFIED )
(E) R-1 9 F. G. BATT
INSULATION UNDER
DECK
1.5" POLYISO (25 PSI)
RIGID INSULATION MECH
FASTENED AS SPECIFIED
(E) BUR ROOF
--(E) PLYWOOD DECKING
CYBERCON CONSULT7NG, INC. Pu.O. SOX .62:2
60182
SCALE: N. T. S. 'APPROVED BY: N. A.L. 1 DRAWN BY: R.BU RKE
DATE: 3-1 4-1 4 "FILE NAME: pw-c-I- SP I REVISED: REVISED
PROLOGIS 2014 REROOF PROJECTS
SEATTLE , WASHINGTON
ROOF SECTION - ROOF TYPE 1 DRAWING
I NO.: 01 F-
0
(N) 24 CAA. a5 GOPIN& W/ 5TA SPINS,
aEAM REFER TO PETAL No. 04
(E) OR (N) WOGD NAILER A5 REQUUREP
6ROMMETTED 5cREW5 /8" 0 .
(N) PAEFLASHINC ADHERED r0
APPROVED SUPSTRAT EXTDVD OVER --------„,\
NAILER TO GUTSIPE EDGE Cr WALL
VARIES
PASS TIE IN PER MFR.
RI&IP INSU.ATION (WARD
A5 SFEGIFIED
NGTE:
IF REQUIRED INSTALL ADDITIONAL
FASTENERS TO WOOD
NAILER AT 24" 0.6. MAX
Q
4
2" MIN.
'/4 t1E7M
22&A.as. T
liaac TRIP
FASTENED 6- OG_ MAX
FURNISH AND INSTALL PAGER
ROD AND SEALANT WHERE
LACKING AT VERTICAL WALL JTS.
FILLER COARP AND AIR PARRIER
LEVEL WITH ROOF A5 REQUIRED.
REFER TO PETAL No. Ob
(RECOVER t*LY)
ALL MafR 11sm1'1!A 021111OR 6 2013 V*
CYBERCON CONSUL 77NG, INC. 1 P.C. 6, co ton
21832
CALE: 3"=1'-0" APPROVED BY: N.A.L. ]DRAWN BY: N.A.L.
DATE: 3-14-14 FILE: PW.CM.SD. TP_02
REVISED: R. BURKE
PROLOGIS 2014 REROOF PROJECTS
SEATTLE, WASHINGTON
PARAPET WALL FLASHING
a
s
1-
!DRAWING NO.: 03
SEND-OiER P /
(FLATTME17 PLAN VIEW)
NT:S
'/41 d,
dz
arm) (?AGM)
(AWL FLUS MATERIALS)
`air- a,r PELF'S -�
tehl"-Gt ER TAD —
sTAM?-LP P� E
(RATT'E EEP FUN VEK9
Mrs.
rA B?
PARK SAP LPES = air -cur
�Ll6H T DASHED L11+E5 = MIPS
HICCEN LINES
40-s/.4"
I � I
` 1 1
1
J I !
AFTDS
I I
1,/ !,/AI dl dZ
(I•dEM) (14ASG4A) (AWLER F11.5 MATERIALS)
LEGEND:
q FIELD MEASURE 5O THAT LIP OF CGPING
E N9 1--1/2" LOW , k 1NT PETWEEN
pOTTGM OF NAILER AND TGP OF WALL.
FIELD MEASURE AFTER MEMPRANE FLASHING
AND WATERPROGFING MATERIALS HAVE PEEN INSTALLED
EXP. GDEP VIEW
SrANDINO SEAM JONI
1- f/4" !Salk -TRIG VIEW
--DAWC WLP LIES = GUr�tlr
L1617r DASrfD LINES = PEM35
•
oEsvx-O R TAc
FINI5i1 P VIEAK •
STAARNIS SEAM L1NT
16GMETRIG VIEW
CYBERCON CONSUL 7ING, INC, u 821832 0162
SCALE: N.T.S. APPROVED BY: N.A.L. DRAWN BY:R.BURKE 4
DATE: 3-19-2014 FILE NAME: STANDING SEAM COPINGREVISED:
PROLOGIS 2014 REROOF PROJECT
SEATTLE, WASHINGTON
SHEET METAL PATTERN FOR
STANDING SEAM COPING
DRAWING
NO.:
4t
(N) WOOD NAILERS TO
EXTEND GI RP AS NEEDED
TO MEET FLASHINI6
I1EIhitr RE lJIREMENr5
(E) SMGKE VENT - REMOVE AND REINSTALL
,ter FOAM EALANT TAPE
----' SR6MMETTED FASTENERS AT EA_ PRF_DRIl 1 FD HGLE5
20 6A &S Ga,NTERFLA5H/N16
SIN SLE PLY MEMPRANE F ASHIN6 PER MFR.
RIGKEI" GN HIM SIDE GP a,RP
/4/ - //T
AIR BARRIER OVER
FILLER BARD
NOTES:
1. REMOVE (E) PASER ASHIN6 AND CANTS AR J ID G(,RDS.
2. FILL VOID WITH GYPS1,M GGRE P19 AND GdVER WITH AIR
13ARRIER GR PEP IN SPLF (2 LA LENITY).
3. FURNISH AN® INSTALL (N) MEMPRANE, STRIPPIN& AND
TARGET PATCHES AT GGRNERS PER MFR.
I ♦ • I I # ♦I PrI ♦ I ♦ I ♦ ♦ �♦ ♦ ♦ III le I
---(E) PLR ROOF
I ft
SCALE: N. T. S. APPROVED BY: N.A.L. DRAWN BY:
DATE: 3-18-14 FILE NAME: S V. WO. P W. EP _01 REVISED:
PROLOGIS 2014 REROOF PROJECTS
SEATTLE. WASHINGTON
CYBERCON CONSULTING, INC. 1 PO' B C IZ1132
uTUZmN. oo /of02
N.A.L. _ 4
SMOKE VENT CURB FLASHING DRAWING
NO.: 1 o
.v
EX!5TIN6
FOAM TAPE
(E) WOOD NAILER
(E) PRE-FAe
METAL u
NOTES•
1. REM*VE ALL OLP A6:1-!ALT
MASTIC, SEALANTS Alt
ROGFIN5 MATERIALS SOW
LNIr FLA511IN6 r0 ALLOW
ROOM FOR 17-1E (N)
CiOU TERFL45t-IING
2. FLRNIS,H AI7 INSTALL. f`
TAPERED INSLLATION
CRICKET ON TYIE iilel-i SIPE
OF Tn-iE GLR6.
(E) PLYWOOD DECK
FLLER WARP AND
AIR DARRIER SEAL
ROOFTOP WIT
EXTEND METAL SKIRT
i3EHINt7 LNI7 11A51- UN&
SEAL TOP EDGE OF BASEFLASH/NG WITH SEALANT
6ROMMETEP BREW 24" OL.
NAL rOP EDGE OF PA5EFLA51-11N6
S" OG.
20 6A 6.5. G'Gi,NrERFI.A511IN6
NEW MIEMrRAINE FL451-1IN6 ADHERED TO PACKER PP-
gA5E TIE IN PETAL PER MT.
(N) PG .r5o.. (25 P5I) RECOVER PAD. A5 5FECIFIEP
(E) t. LT -LP ROOF TO REMAIN
CYBERCON CONSUL 77NG, INC. ui eO" g216'2
urnFron. co eo,es
SCALE:
LE. N.f
T.S.S APPROVED 8Y: N.A.L. DRAWN BY: R.BURKE
DATE: 3-18-2014 FILE NAME: CF.SC.PW.EP_01 (REVISED: REVISED
Prologis 2014 REROOF PROJECTS
Seattle, Washington
HVAC EQUIPMENT CURB FLASHING IDRAWtiNoc;:
UW r L LLAR Ar
(E) EQUIPMENT LLRP
SLREW 2 EA 510E
l EW PASEFLASHIN6 ADHERED
5EGURE TOP NW WI771 RGL:reMJ6 NAILS
FIELD SHEET
CONT. ANCHOR PAR OR
SEAM PLATE E FASTENERS
PER MFR.
FLASHING BELOW COLLAR
NOTES:
!. FLRN1511 AND INSTALL PACKER WARP OVER
CONTAMINATED SURFACES PER MFR.
z. TF J iNATIGi'N PAR Ar TOP EGY. MAY AE GMI► I IF
LNIr GAP IS REMOVED AND ►+EMPRAINE EXTENDED LP
AND OVER LIRb
INSTAL.L TERM PAR AP(NE TGP EP E GF PAC.KER PD
4. FURNISH AIsf, INSTALL GLOSL,RES Ar OPEN GOR! IRS
(E) MEAL COLLARS, RIVETED AND SEALED.
5 I9RINI5H AND 1N5rALL CRICKETS al THE HIGH SIDE OF
THE LLRP.
- ' COLLAR EAr (E)
/_- -- acREWS
654L4NT
-NEW 26 GA. G.S. COUNTERFLASHING
--TERM PAR, FASTEN /Z" OG.
- ---- WATERPL.OGK MASTIC
NEW PA58A5171N0 ADHERED
FIELD fET
LGNT. ANU-10R PAR OR
E AAr1 PLATE PASTEICR5
PER MFR.
SLIP FLASHING METHOD ALTERNATE
CYBERCON CONSUL 7ING, INC. u BOX 62� =62 I
SCALE: N.T.S. APPROVED BY: Al. !DRAWN BY: N. .L.
DATE: 3-17-14 (FILE NAMECurb.SPM.Generic (REVISED:
PROLOGIS 2014 REROOF PROJECTS
SEATTLE, WASHINGTON
EQUIPMENT CURB FLASHING 1 DRAWING r�
NO.: L
5
1
a
2 LAYERS cE 1" PLYw0Gp, Kr
LAYER 6Ll m AND PAWED AND
(-IND LAYER 5cRE EI7 IN
(E) AU? TO REMIAN
(�) ROc1F HATCH REJNOVE12 AND
REINSTALLED GN (N) wOa
NAILER TO MATCH IN5LL.
THICKI‘ES5
(N) 26 6A 6.5 SLIP PLASHING FASTENED
24" OG. MAX
(N) )514 .4fFf1N6 AD!-IERED PER wiz seaR '
rep EDr. er OG. MAX WITrI GAPPED NAILS
- (N) TRAFF/G PROTEGr/GN PAP ADHERED
TO (N) MEMPRANE
1/2" G GR FLYWOCD COVER
GP. AT ACCESS 5IPE Gr RGGF
I -Ara t (V" x V')
1" PGL.YI50 R&D IN5LLATIGN riELOW
O GOVPR EoR ONLY. PROVIDE /.5"
AT R1314AININ& AREAS
NOTES:
1. ftrRNl5t1 AND INSTALL CRICKET
GN 111611 SIDE Gi= CARP PELOW
RIGID INSLI ATIGN AD.
2. ADD SAFETY �g��RAIy{LSER
�AND "LADD
1 SMIL " e1P 7! ER
DESIGNATED.
CYBERCON CONSULTING, INC. P.O. BOX .13 80162 I
It
SCALE: N.T.S. APPROVED BY: N.A.L. DRAWN BY:R.BURKE
DATE: 3-19-2014 FILE NAME: _RH.PW,PREP 01 REVISED:
PROLOGIS 2014 REROOF PROJECTS
SEATTLE, WASHINGTON
ROOF HATCH CURB DRAWING
NO.: 13
NUT & 8GL r
DRAW MELHANISM
24 6A. 6.5. ROLF
WITH I-1/2" a EARA,e
(N) R16117 INSLb4L rl
(E) AJIL T—LP ROLF ro REMAIN
NOTES:
INSTALL ROOF' ,1,4Gx OVER MEMPRA1 E PEPPED
IN WATER-At.00< MASTIC. 5EGLRE WITH PAN
tlEAP W5 AT 4" OL. MAX.
•
(E) POUP .E WALL FLLE PIPE
SEALANT
24 6A. & 5. STORM Ga./.AR
r S. WGRM &EAR GLAMP
FI ERGLAss INSLCATIOv
AVREINF FL.ASYIIN6 PER MFR.
PELGW
WATER
FLAIvIE
CYBERCON CONSULTING, INC. I P.O.4a 162
SCALE: N.T.S. BY: N.A.L. IDRAWN BY:R.BURKE 4
DATE: 3-17-14 [APPROVED
FILE NAME:H V. PW. WF.TP_01 1DRAWN
REVISED: REVISED
Prologis 2014 REROOF PROJECTS
Seattle, Washington
ROUND HOT STACK FLASHING
l DRAWING
NO.: 14
HIGH TaIPERATLRE _
SEALANT
GINGH 4RAGICET WITT I MATS,
pi;L TS AND LOGO WA511ER5
PRAGICET
0 STORM COLLAR
STGRM ca LAR G!NGH DRAGKET
(N) 24 &A G:5 STGRM GGL LAR
(N) OR (F) BEET METAL GLR6 GAP
FIPERELA55 INQLATIGN
6RGMMETTF� BREWS 2 EA.
SIPE MIN.
(1V) kA5EFL A5HIN5 A I-1EREp LP
AND OVER TI-E (E) GM,
/5ASE TE-!N FER
FILLER PD. A5 REQUIRED
BOX °� 80162 I
CYBERCON CONSULTING, INC. Puntrroma
SCALE: N.T.S. ]APPROVED BY: N.A.L. 'DRAWN BY:
N. .L.
DATE: 3-17-14 'FILE NAME: HV.15.Pw.CRB.EP o1
REVISED:
PROLOGIS 2014 REROOF PROJECTS
SEATTLE, WASHINGTON
EQUIPMENT CURB FLASHING
I DRAWING
NO.. 15
SECTION VIEW
4" x 4" RFD WOGP
OR PRE5` (RE TREATED WOOD jLOGKING,
srAUC As REQUIRED TD PRGPERLY
5LPPORT PIPE TO maw 5FEGIFIFD.
5EGLRE WOLCP (XOGKS TGr ThER
W/ METAL TRAP AIVD 5W5.
MIN. trIeHT OF PIPE AC► 'E R0a- 5 ALL
• ' GRM TO LOCAL 6,0E5
CYBERCON CONSUL 11NG, INC. I P.O.eco 80162
N.T.S. APPROVED BY: DRAWN BY: N.A.L.
17-14 'FILE NAME: PIPSUP2A_PVC [REVISED:
PROLOGIS 2014 REROOF PROJECTS
SEATTLE, WASHINGTON
PIPE SUPPORT SLEEPER J
ORAWING
NO.: 16
FIFE LINES
FILL VOID WITH
� ) FOAM
NOTES:
I. SOLDER ALL METAL. JOINTS ON
11O0P AND GOLNTERFLA5111N6.
Z. FILL PDX WITI1 FIPMR6LASS
INSU ATIG�N
WOOD NAILER
(E) PLR ROOF
PIPEUNE5
INSTALL Z PIECE CLOG IRE PLATE (Nor SFIOVNN)
24 &A 6.5. METAL PIPE PDX
POTTOM PLATE Nor ShO M
24 6A. 6.5. METAL GGUJTERFLAafIN&
FASTENERS
PIPE LINES
2 PIECE FACEPLATE CLOSURE
SEAL JOINTS AND SEAMS
wITti GAUAINS
WOOD CURB
(8" MIN. 11E1611T A$POVE ROOF)
BASE TIE-IN PER MFR.
PASEf LASI1IN&
SECTION
FONT VIEW
5IN6LE FLY MEMPRANE (SEE SPECS.)
Rep INSUALTION (SEE SPECS.)
CVBERCON CONSULTING, INC. P.O.uBOX 62� 80162 1
tt
SCALE: N.T.S. APPROVED BY: N.A.L. DRAWN BY:R.BURKE
DATE: 3-19-2014 FILE NAME: PP-6C4 REVISED:
PROLOGIS 2014 REROOF PROJECTS
SEATTLE, WASHINGTON
PIPE CLUSTER FLASHING DRAWING
NO.. 7
WATERIXOGK MASTIC
•
•
.! •J•.;S :ail
BOOT DETAIL
'rJ.%;:q-:5;<_'.Fi'Z9.Xsw;.<::FQ':"^.••:.; a:5:?:7f>;:/.:�., ,;;..2".tJ.`;::>:'.,'.
$ 7j.t;i ; ''I :i::
FLASHING DETAIL
GALLKIN&
5.5. GLA►y1P
PRE-MANLFAGTLRED PIFE F A5HIN&
PRE -APPLIED SEAM TAPE
iy.:?•Y.oif.';'c�!'d.$4itif
:It a" : .l
.}f?SS1
E&ANT
LNG,RFD FIELD WRAP FLA51.11NO
U'&REP EFT. M FLASHING
LAP SEALANT
•
l
RI&IP INSWATION REFER
TO SPEGIFIGATIGNS
51NSLE FLY MEM.eRA! E
A5 SPECIFIED
Reif 1N5ILAT1GN REFER
TO EGIFIGAT•GNS
a
VED BY. A.L. DRAWN BY: N.A.L.
DATE: 3-17-14 IFILE NAME:FW.PM.05_35.AL.EP O4REVISED:
PROLOGIS 2014 REROOF PROJECTS
SEATTLE, WASHINGTON
CYBERCON CONSUL 11NG INC. P.O. BOx Bs1632
uT7LETON. co 80162
SCALE: N.T.S. APPRO
PIPE FLASHING
'DRAWING 19
(N) 24 6A 6.5. GRAVITY VENT WITH
INSEGT SRO/ r0 MATCH (E)
FIAER6LA55 INS .LArray
5GREW5 2 EA.
5VE MIN.
1511
d........... !I!II:iiiii,:iii'
"u
(N) IM5ETLA511N6 ADI1ER
_D LP
ii��_- -PA5E TE-IN PER MPRAmOVER THE (E) LRP
lluT�'Ilk Ul"#lu
5r�iIll
i.
....
��I-i , iit lam_i1liul, _t�
eiiL14112!'&'imlt.l9i" .yiIlill•j�IrLn�n/"ii144!I�liili�i1�jI1�I ,,riiijliiiy �li!i164i`Ii�
.:� =z.
— FILLER AP. A5 REQUIREP
CYBERCON CONSULTING, INC. IP•a sox 621832
Urn Eros• co 60162
SCALE: N.T.S. APPROVED BY: J�.
.A-L. DRAWN BY: N. ..
DATE: 3-17-14 ,FILE NAME: HV.PW.CURB_01
REVISED:
PROLOGIS 2014 REROOF PROJECTS
SEATTLE, WASHINGTON
GRA VI TY VENT CURB FLASHING
DRAWING 22
NO.:
(N) LJI-5TRur FRAME5 2 EA ro s ART (E)
f7 FGT. DI5GGNNEGT p0X AND AGGE56 RE5
(N) I-I/2" X 3/8" LAE' (GREW THRU
UV!-5TRur OVER 5EALAWr OVER
EF 44 &A5KET SEAL OVER SEALANT —
(N) GLRP sEGLRED ra
DECK WITH 'L"
PRAGIKETS 2 EA. SIDE
INS{L4TE INSIDE WITH
r PATT5
•
•
(N)24&A6.5.METAL GAP
OVER WATERPROGFIN6
OVER PLrnv. GOVER
e
(N) DI5GGN EGr 150X
AND GUTLEr
ANTED TO (N) FRAME
(N) f7 Fr r FLEx LUNE AND
WIRIN& PER GGDE
(N) WAT15?TIOHT
GGN!`EGTIGN PER GGDE
SrGRM GOLLAR,
Gib & SEALAMr
(N) FLASH/NI& FFtk
'S11;
(�l�li!
j{ttl �1
CYBERCON CONSUL T/NG, INC.
P.Q. Bent **tot/
UTTLETON. CO 00162
SCALE: N.T.S. APPROVED BY: N.A.L. ORAWN BY: N.
DATE: 3-17-14 IFILE NAME: ELECT_PANEL7 (REVISED:
PROLOGIS 2014 REROOF PROJECTS
SEATTLE, WASHINGTON
ELECTRICAL PANEL BOX
DRAWING
NO.:
(N) TAPERED INSLL_ AD. 4 FT. WIDE
NEW SINGLE -PLY Maf1RIRAl'E
NOTES:
2.
4.
5.
(El 4JLT-LP ROOF
PROVIDE pUTT oR LAP TYPE V PANSION ANTS PEns,CEN
DOWN SPOUT5 IN CUTTER PER E 4a4A GUIDELINES.
OVERLAP GUTTER 5EGT1GN5 A MIN. GF 4" AND ClED LAPS
WITH PUPIL SEALANT. SFLLRE SEGTIGNS WITH 5TAJt LE55
STFfI RIVETS SPAGFD 2" 04. MAX
REUSE (E) 12~15Pa.JTS.
PROVIDE POLYI R-LAD METAL FLASHING AT DRIP EL f
WITH HEAT WELDED STRIP IN MEMPRAINE FOR
Tl'ERMO ..A TIG MEMARANE OPFIGN.
GGNTRAGrcR SHALL MAINTAIN TtE WATERTIGHT INTEGRITY
GP THE DF-a<-TO-WALL JOINT PIPING 4ONSTRL T7ON.
GPT•IGNIIL ROCF 1576f PETAL
IN LIEU OF PETAL No. Nog"
I I
r
4
(N) 2X0 WD NAILER
FASTEN 12" O.G.
STRIPPING HEAT WELDED
PER MFR
24 6A. 0.5. DRIP EDGE
NAL 4" O. STAGGERED
WEATHERSEAL WASHER
20 6A MIN. as.
GUTTER STRAP
'-12' 24" 04. MAX
24 6A 6.5 PREFIX
8" eurrr.RR PER SMAGNA
*" X 1" PAIWTID
5"TF�L GUTTER
SLPPORT ® J6" 00.
MAX
GARRY M lARANE OVER
NALERS ONTO WALL PANEL:
24 6A 6.5. PREFIN.
'AUCLP FLASHING
CYBERCON CONSUL T7NG, INC. ! P.O. BOX .132c01113280182
SCALE: N.T.S. APPROVED BY: I.A.L. 'DRAWN BY:
DATE: 4-18-14 WILL N AME:EG. CO.PW. TP.1.5_011REVISED:
PROLOGIS 2014 REROOF PROJECTS
SEATTLE, WASHINGTON
N.
GUTTER / EDGE FLASHING
DRAWING 27
ND..
Wayne's Roofing, Inc.
13105 Houston Road
Sumner, WA 96390
www.wavnearooflno.com
PRODUCT DATA 2
TECHNICAL INFORMATION SHEET
'Firestone
[WILDING PRODUCTS
UltraPlyTM TPO Membrane
Item Description Item Number
1 Roll Various
Meets or exceeds ASTM D 6878.
LpD M , L
Product Information
Description:
Firestone UltraPlyT l TPO is a flexible Thermoplastic Polyolefln roofing membrane that is produced with polyester weft -
inserted reinforcement. UltraPly TPO membrane meets or exceed 878 Specification. This
heat weldable TPO membrane is available in 45 mil (1.14 mm) an 60 mil (1.52 mm) thicknesses)This reflective
membrane is suitable for a variety of low -slope applications.
Method of Application:
1. Substrates must be clean, dry, smooth, and free of sharp edges, fins, loose or foreign materials, oil, grease, and other
materials that may damage the membrane.
2. All roughened surfaces that can damage the membrane shall be repaired as specified to offer a smooth substrate.
3. All surface voids greater than 1/4" (6.3 mm) wide shall be properly filled with an acceptable fill material.
4. Firestone UltraPly TPO membrane is installed as continuous roofing or waterproofing layer on the roof. Rolls are
overlapped (side laps and end laps) prior to the heat welding of the seam areas.
5. Install the UltraPly TPO Roofing System in accordance with current Firestone UltraPly TPO specifications, details and
workmanship requirements.
Storage:
• Store away from sources of punctures and physical damage.
• Assure that structural decking will support the loads incurred by material when stored on rooftop. The deck load
limitations should be specified by the project designer.
• Store away from ignition sources as membrane will bum when exposed to open flame.
Precautions:
1. Refer to Material Safety Data Sheets (MSDS) for safety information.
2. Exercise caution when lifting, moving, transporting, storing or handling membrane rolls to avoid sources of
punctures and possible physical damage.
3. Contact your Technical Coordinator at 1-800-428-4511 for specific recommendations regarding chemical or waste
product compatibility with Firestone UltraPly TPO Membrane.
LEER® Information:
Post Consumer Recycled Content:
Pre Consumer Recycled Content
Manufacturing Location:
0%
15%
Wellford, SC APPROV®
Tuscumbia, AL ICC-ES
ESR-2831
CCMC 13348-R
S723-RFS-012
Firestone Building Products I Sales: (800) 428-4442 'Technical (800) 428-4511 I www.8restonebpco.com
TIS 0 201
Page 1 of 3
1/8/2013
TECHNICAL INFORMATION SHEET
'Firestone
BUILDING PRODUCTS
UitraPlyTM TPO Membrane
'roduct Sizes
Membrane Thickness: 0.045" (1.14
mm)
Membrane Thickness: 0.060" 11.52 mm)
Membrane Weight: 0.23 Ib/ft2 (1.1 kg/m2)
Membrane Weight: 0.31 Ib/ft2 (1.5 kg/m2)
Available Sixes
Available Colors
available Sizes
Available Colors
5' x 100' (1.5 x 30.5 m)
While, Tan, Gray
5' x 100' (1.5 x 30.5 m)
White, Tan, Gray
5' x 200' (1.5 x 61 m)
White
5' x 200' (1.5 x 61 m)
White
6' 2" x 100' (1.9 x 30.5 m)
White, Tan, Gray
6' 2" x 100' (1.9 x 30.5 m)
White, Tan, Gray
8' x 100' (2.4 x 30.5 m)
White, Tan, Gray
8' x 100' (2.4 x m)
White, Tan, Gray
8' x 200' (2.4 x 61 m)
White
8' x 200' (2.4 x 61 m)
--10' x 100' (3.0 x 30.5 m)
`9-
10' x 100' (3.0 x 30.5 m)
ite Tan,rGray.
10' x 200' (3.0 x 61 m)
White
10' x 200' (3.0 x 61 m)
White
12' 4" x 100' (3.8 x 30.5 m)
White, Tan, Gray
12' 4' x 100' (3.8 x 30.5 m)
White, Tan, Gray
12' 4" x 200' (3.8 x 61 m)
White
12' 4" x 200' (3.8 x 61 m)
White
Physical Properties
(Meets or exceeds
Prooeriv
ASTM D 6878 Specification.)
!►STM Standard
P°rf� Oa
Twice' Performance
Typical Performance
60/ni1
-
mi
Overall Thickness:
D 751
0.039" (1 mm)
0.045" (1.14 mm) t 10%
0.060" (1.52 mm) t 10% {
Coating over Scrim:
D 7635
0.015" (0.38 mm)
0.017" (0.43 mm)
0.021" (0.53 mm)
Strength:
D8reaking 15Greb
,Me
220 lbf (979 N)
340 lbf (1,512 N)
390 if (1,735 N) -I
Elongation of
Reinforcement Break:
D 751, Grab
Method
15%
25%
25%
Tearing Strength:
D 751
55 tbf (245 N)
120 lbf (534 N)
120 lbf (534 N)
Brittleness Point:
D 2137
-40 °F (-40 °C)
Pass (No Cradcs)
Pass
' Pass
Pass
Pass
Ozone Resistance, No
C
D 1149
Properties After Heat Aging (Retained Values) (ASTM D 573 670 h at 240 F (116 'C)):
Breaking Strength:
D751,Grab
Method
9096 Minimum
> 90%
> 90%
Elongation at Break:
D 751, Grab
Method
90% Minimum
> 90%
> 90%
Tearing Strength:
D 751
60% Minimum
> 60%
> 60%
Weight of Change:
Linear Dimension Change:
Water Absorption:
S723-RFS.012
D 1204, 6 h at
158'F (70 "C)
D 471
t 1% Maximum
<1%
<1%
t 1% Maximum
t 3% Maximum
<1%
< 3%
<3%
Firestone Building Products J Sales: (800) 428-4442 J Technical (800) 428.41i11 1 www.flrsetonebpeo.com
TIS 0 201
Page 2 of 3
1 /8/2013
TECHNICAL INFORMATION SHEET
"Firestone
BUILDING PRODUCTS
UltraPly. "" TPO Membrane
Property
ASTM Standard
Performance
Tyolcal Performance
45 mil Membrane
Typical Performance
Minimum
60 mil Membrane
Weather Resistance,
80 •C Black Panel, no
cracking, crazing when
wrapped around a 3"
mandrel and inspected
at 7X magnification:
G 155
10,800 kJ/m2
Minimum
> 20,160 kJ/m2
> 20,160 kJ/m2
Puncture Resistance:
FTM 101C, Method
2031
265 (1,180)
300 (1,300)
Dynamic Puncture
Resistance MD:
D 55
Pass (20 J)
Pass (40 J)
Dynamic Puncture
Resistance CD:
D
Pass (35 J)
Pass (50 J)
Static Puncture
Resistance:
D 5602
Pass (25 kg)
Pass (25 kg)
Cool Roof Retina Council IGRRG): initial / 3 IT
Elit
an
Sal
Solar Reflectance
0.79 / 0.68
0.61 / 0.55
0.34 / Pending
Therrnal Emittance
0.85 / 0.83
0.81 / 0.84
0.89 / Pending
Solar Reflectance index (SRI)
98 / 81
71 / 63
37 / Pending
Rated Product ID
0008
Licensed Manufacturer ID
0608
Classification
Production Line
ENERGY STAND: Initial / 3 vr
YYh t81
Tan
Solar Reflectance
0.79 / 0.78'
0.60 / 0.54
Thermal Emittance
'
0.85
0.81
White membrane sample cleaned prior to age test.
Mgt
White
Tan
Gray
Solar Reflectance —ASTM E 903
0.81
0.63
0.37
Thermal Emittanoe — ASTM E 408
0.95
0.95
0.95
Solar Reflectance Index (SRI) — ASTM E 1980
102
77
43
_...
prestono
CR
NSW
�a
ENERGY STAR Is wiry
valid in the (!Hired Stabs
Please contact your Firestone Roof Systems Advisor at 1-800-428-4511 for further information.
This sheet is meant to highlight Firestone products and specifications end is subject to change without notice. Firestone takes responsibility for
furnishing quality materials which meet published Firestone product specifications. Neither Firestone nor its representatives practice err;hitedure.
Firestone offers no opinion on and expressly disclaims any responsibility for the soundness of any structure Firestone accepts no liability for structural
failure or resultant damages. Consult a competent structural engineer prior to installation if the structural soundness or structurel ability to property
support a planned installation is in question. No Firestone representative is authorized to vary this disclaimer.
S723-RFS-012
Firestone Building Products 1 Sales: (800) 428.44421 Technical (800) 428-4511 1 www.tirestonebpco.com
TIS # 201
Page 3 of 3
1/8/2013
TECHNICAL INFORMATION SHEET
Tirestone
BUILDING PRODUCTS
RESISTA TM Insulation
Item Description
Flat and Tapered
Product Information
Double Coated
Fibeglass Facer
Foam Con;
Description:
Firestone RESISTA flat and tapered roof insulation consists of a closed -cell polyiso foam core laminated to a specially
coated, inorganic, fiberglass facer. RESISTA roof insulation provides outstanding fire, wind and thermal performance for
single -ply and modified bitumen commercial roofing applications.
Alt Firestone polyiso insulations use EPA accepted blowing agents and qualify under the Federal Procurement Regulation
for Recycled Material. Flat and tapered RESISTA insulation with 1SOGARDTM foam technology incorporates a HCFC-free
blowing agent that does not contribute to the depletion of the ozone (ODP-free). Additionally, Firestone RESISTA
insulation is a formaldehyde free material.
RESISTA insulation is a mold resistant material per ASTM D3273.
Method of Application:
1. Insulation shall be neatly fitted to all roof penetrations, projections and nailers.
2. No more insulation shall be installed than can be covered with membrane and completed before the end of each
days work or before the onset on inclement weather.
3. RESISTA flat and tapered insulation must be installed using: Firestone approved insulation adhesives. See
Firestone Technical Information Sheet 950 for insulation attachment patterns.
Warranty:
Firestone RESISTA insulation is acceptable in approved Firestone Red ShieldTM or PlatinumTM Roofing Systems ranging
from 5 to 30 years.
RESISTA Flute Span Over Metal Decks
Thickness
Span
1.0"
1.25"
2.625" 3.675"
1.5"-3.8" I 4.0"
4.375" 4.5"
Storage:
• Keep insulation dry at all times.
• Elevate insulation above the deck or ground.
• Cover insulation with waterproof tarps.
S723-RFS-267
Firestone Building Products I Sales: (800) 428-44421 Technical (800) 4254511 l www.flrestooebpco.com
TIS 8 917
Page 1 of 4
04/18/2014
TECHNICAL INFORMATION SHEET
r$restofe
BUILDING PRODUCTS
RES1STATM Insulation
Precautions:
1. Combustible. Refer to Safety Data Sheets (SDS) for more information.
2. Do not install over wet, damp or uneven substrates.
Specification Compliance:
ASTM C1289, Type 1I, Class 2
UL Classified
FM Class 1 Approved
Manufactured In an ISO 9001 Registered Facility
CAN/ULC-S704, Type 2 pending
APPROVED
vss/p,
�'
c US 'tyM�C
Co.•.fc' ii7r ..>C.
LEED® Information:
Firestone RESISTA insulation can help contribute to overall L.E.E.D. certification due to its thermal efficiency (R-Value),
recycled content, and zero ozone depletion. RESISTA Insulation can help achieve valuable credits in the folowing
categories:
Energy and Atmosphere:
- Benefits of commissioning building energy systems include lower energy use and lower operating costs.
- Firestone RESISTA insulation contains the highest R-Value per inch to help assist in the
following credits:
• EA Pre -requisite 2: Minimum Energy Performance
• EA Credit 1: Optimize Energy Performance (1-19 points)
Material & Resources:
- Benefits include the reduction of waste, as well the preservation of landfill space and raw materials.
- Firestone RESISTA insulation contains recycled content, can be re -used, and is manufactured strategically
across the United States.
• MR Credit 2: Construction Waste Management (1-2 points)
• MR Credit 3: Material Re -Use (1-2 points)
• MR Credit 4: Recycled Content (1-2 points)
• MR Credit 5: Regional Material (1-2 points)
Manufacturing Locations: Florence, KY Youngwood, PA Salt Lake City, UT Bristol, CT
Jacksonville, FL Deforest, WI Corsicana, TX
Typical Properties
Physical Property
Compressive Strength:
Density:
A8TN Test
Enolish Values
Metric Values
D 1621
*20 psi
138 kPa
Dimensional Stability:
Moisture Vapor:
Transmission:
D 1 622
2 pcf
D 2128
32 kg/m
<2%
<2%
E98
<1.0
<57.5
Water Absorption by Volume:
C 209
_••••
<1 %
rI ra•s•rn-)
<1 %
Service Temperature:
.25osi 1172 kPal available. Litwin rom��n&
-100 • to 250 °F
-73• ° to 121 °C
S723•RFS-257
Firestone Building Products ( Sales: (800) 42S-4442 'Technical (800) 428-4511 I www.flrestonebpco.com
TIS # 917
Page 2 of 4
04/18/2014
TECHNICAL INFORMATION SHEET
Firestone
BUILDING PRODUCTS
RESISTATM Insulation
Product
Data
Thickness*
LTTR"
Max Flute Span
% Post
% Post
Recycled
inches m m
(R-ValueZ
inches tr>_m
Industrial
Consumer
1.00
25.40
5.7
2.625
66.67
Content %
52
15%
52%
1.25
31.75
7.1
3.675
93.34
48
15%
48%
--- 1.50
38.10
8.6
4.375
111.1
44
15%
44%
1.75
44.45
10.0
4.375
111.1
41
15%
41%
2.00
50.80
11.4
4.375
111.1
39
15%
39%
2.30
58.42
13.2
4.375
111.1
36
15%
36%
2.50
63.50
14.4
4.375
111.1
35
15%
35%
2.80
71.12
16.2
4.375
111.1
33
15%
33%
3.00
76.20
17.4
4.375
111.1
32
15%
32%
3.25
82.55
18.9
4.375
111.1
31
15%
31%
3.50
88.90
20.5
4.375
111.1
30
15%
30%
3.75
95.25
22.0
4.375
111.1
29
15%
29%
4.00
101.60
23.6
4.500
114.3
29
15%
29%
"Long Tenn Therms! Resistance (LTTR;) values provide a 15-year tine -weighted average in aocordanoe with CA WULC-S770.
Available Sizes:
Flat Boards: 4' x 4' (1.22 m x 1.22 m), 4' x 8' (1.22 m x 2.44 m)
Thickness ranging 1.0" (25.4 mm) to 4.0" (101.6 mm)
Tapered Boards: 4' x 4' (1.22 m x 1.22 m), 4' x 8' (1.22 m X 2.44 m) (special order)
Thickness ranging 0.5" (12.7 mm) to 4.0" (101.6 mm) slopes ranging 1/16" per foot (.5%) to 'A" per foot (4%).
Tapered RESISTA (available sizes)
Panel Code
Mhi-Max
Inches/Dm
mlckns s
Slope
A
0.5" - 1.0"
12.7 mm - 25.4 mm
1/8"/ft.
1%
AA
1.0" - 1.5"
25.4 mm - 38.1 mm
1/8"/ft.
1%
B
1.5"-2.0"
38.1 mm - 50.8 mm
1/8"/ft.
1%
C
2.0" - 2.5"
50.8 mm - 63.5 mm
1/8"!ft.
1%
G
1.0" - 2.0"
25.4 mm - 50.8 mm
1/4"/ft
2%
H
2.0" - 3.0"
50.8 mm - 76.2 mm
1/4"/ft.
2%
I
3.0" - 4.0"
76.2 mm -100.6 mm
1/4"/ft.
2%
X
0.5"-1.5"
12.7 mm - 38.1 mm
1/4"/ft.
2%
Y
1.5" - 2.5"
38.1 mm -63.5 mm
1/4"/ft
2%
Z
1.5"-2.5"
38.1 mm-63.5mm
1/4"/ft.
2%
0
2.5" - 3.5"
63.5 mm - 88.9 mm
1/2"/ft.
4%
8723-RFS-257
Firestone Building Products I Sales: (800) 428-4442 I Technical (800) 4284511 I www.11rsstonebpco.com
TIS # 917
Page 3 of 4
04/18/2014
TECHNICAL INFORMATION SHEET
'Firestone
BUILDING PRODUCT$
RESISTATM Insulation
2.5'
r1"
0.5"
1/8"/ft. Tapered Section
0.5'
1/2"/ft. Tapered Section
1/41ft. Tapered Section
1/4"/ft. Tapered Section
Contact Firestone's Estimating Services Department for a project quotation or for layout guidance. For site assistance
or contractor support, contact Firestone's Tapered Project Management Team by calling: 1-800-428-4442 or by
emailing: estimatingservicesdeotefirestoneba.com
Please contact your Firestone Building Systems Advisor at 1-800-428-4511 for further information.
This sheet is meant to highlight Firestone products and spedfications end /s subject to change without notice. Firestone takes iesponsib/ity for
furnishing quality materials which meet published Firestone product specifications. Ne#her Firestone nor its representatives practice architecture
Firestone offers no opinion on and expressly disclaims any responsibility for the soundness of any structure. Firestone accepts no liability for structural
failure or resultant damages. Consult a competent stnrctural engineer prior to installation it the structural soundness or structural ability to property
support a planned installation is in question. No Firestone representative is authorized to very this disclaimer
8723-RFS-267
Firestone Building Products I Sales: (800) 4284442 I Technical (800) 4284511 I www.flrestonebpco.com
TIS # 917
Page 4 of 4
04/18/2014
TECHNICAL INFORMATION SHEET
FSP-215
11'07 2008
Tsrestone
SPECIALTY PRODUCTS
UltraPly TM TPO
General Purpose Sealant
Firestone Item Number:
W56TP03002: 0.30 L (10.3 oz.) Cartridges
DESCRIPTION:
Firestones UltraPly TPO General Purpose Sealant is a
high quality sealant with excellent adhesion to a variety of
surfaces. It is for use in conjunction with approved
Firestone membranes as a fastener sealer, termination bar
caulk, and UltraPly TPO Cut Edge/Seam Edge treatment,
where designated by Firestone Specialty Products
specifications and details.
This sealant can be used to caulk or seal sheet metal,
masonry, brick and concrete block (i.e., sealant by others).
METHOD OF APPLICATION:
Firestone UltraPly TPO General Purpose Sealant is
designed to be applied with an ordinary caulking gun.
Surfaces to receive UftraPly TPO General Purpose Sealant
must be clean, dry, sound, frost free, and grease free. If
grease is present on a substrate (i.e. from oil, etc.), it must
be removed with a suitable solvent.
When Used as General Purpose Sealant: Cut nozzle to
desired bead size and apply sealant, making sure that the
sealant is in good contact with all sides of the joint.
Tooling of the General Purpose Sealant is not required.
SHELF LIFE:
1. Shelf life of one (1) year can be expected if stored In
original unopened container at temperatures between
15.6 - 26.7' C (60 - 80° F).
2. Shelf life will be shortened if exposed to elevated
temperatures.
3. Rotate stock to ensure stored material will not go
beyond the shelf life of one (1) year.
STORAGE:
1. Store in original unopened container at temperatures
between 15.6 - 26.7° C (60 - 80° F) until ready for
use.
2. When exposed to lower temperatures restore to room
temperature prior to use.
3. Keep the material out of direct sunlight until ready for
immediate application.
Image not Available
PRODUCT DATA
ftEllti
Base:
Color
Solids:
W & Ozone Resistance:
Specific Gravity:
Cure System:
VOC:
Minimum Performance
EPDM Rubber
White
80% (nominal)
Excellent
1.40 -1.46
Solvent Based
<250 (2.09 lb/gal)
mamilimminimmmum
COVERAGE RATE:
Approximately 182.88 m In a 6.35 mm x 6.35 mm (600 If in
a 0.25° x 0.25') continuous bead per 0.30 L (10.3 oz.)
cartridge.
PACKAGING:
0.30 L (10.3 oz.) cartridges are packaged 25 cartridges per
carton and 60 cartons per pallet.
PRECAUTIONARY DATA:
1. Review Material Safety Data Sheet (MSDS) prior to
use.
2. For professional use only.
3. Use only in well ventilated areas.
4. Avoid contact with skin. Use of neoprene or nitrite
gloves is recommended. If sealant does get on skin,
wipe sealant from skin before wetting. Wash hands
and face thoroughly with soap and water before eating,
drinking, or smoking.
5. Eye protection with side shield is recommended. In
case of contact with eyes, immediately flush with water
for 15 minutes. if irritation persists, seek medical
attention.
6. Thinning is not allowed.
7. Keep out of reach of children.
8. Recommended cleaners are mineral spirits or SW-100
before the sealant cures. After sealant cures, it can be
removed by abrasion or mechanical means.
9. Do not contaminate with foreign materials.
10. UltraPly TPO General Purpose Sealant is not to be
used for: aquariums, food contact surfaces, hot
stack/stove pipes replaces, structural glazing, below
grade applications or splices.
11. Solvent cleanings are recommended when using
UltraPly TPO General Purpose Sealant.
S723-SPP-068
TECHNICAL INFORMATION SHEET
FSP•215
11 J072008
12. When cleaning substrates to receive UltraPty TPO
General Purpose Sealant, detergent or soap and water
treatments are not recommended. Solvent cleanings
are recommended to clean protective films, oils, etc.
13. UltraPly TPO General Purpose Sealant can be used in
various applications where a high quality general
purpose construction sealant is required, but which are
not associated specifically with the installation of an
approved Firestone membrane system. When the
UltraPly TPO General Purpose Sealant is used in such
non -system applications, maintenance/ replacement of
the sealant may be required at more frequent intervals
than those associated with specified system
applications. In such instances, it is the responsibility
of the owner to affect such repairs.
14. When UltraPly TPO General Purpose Sealant is used
in non -system application, it is not covered under the
terms of the Firestone Membrane System Warranty.
Rather, the following express warranty Is offered on
the product.
LEED INFORMATION:
Post Consumer Recycled Content: O%
Post Industrial Recycled Content: O%
Manufacturing Location: Michigan Center, Mi
Warranty:
Firestone UttraPly TPO General Purpose Sealant is
warranted against defects in material for one year from
delivery and Firestone must be notified in writing of any
claim. This warranty supersedes and is in lieu of aN other
warranties or guarantees whether expressed or implied,
including, without limitation, warranties of merchantability
and fitness for a particular purpose. Firestone agents have
no authority to give any warranties whatsoever.
Tea sheets meant orgy lo hpwaora Neatens, a ;newer mei .peal eHYm Mean ion a *Abed ti erupt Weyerut
nits s^r°uWIN wiremersySo, hnaNpquay midweek %tel mar s,rtme•tpublished h+Woa
',Whelan N maw Fradore bell nubs rypewrntyMe melee doom. Freedom odds no When on and
wenn* doblents any rorporeeety for leo eardnsr d oey pupa en with a predicts maybe embed rr
ensSbm srae w b eIsobinceses d p peps; d b Seely b biped* Wend paarlar reeve* IN Owns,
voedolen epees dcomplied Pogo enpnssi Weis pooeedrp insane .cape ro nanny Owens sees
ab WILOUnid.+10.1. eMpro Flom* Repeaaamo■ authorise bwy eredidnnM
'Firestone
SPECIALTY PRODUCTS
UltraPly TPO
General Purpose Sealant
Firestone Specialty products
250 west 98th Street. Indranapobs, Indiana 48280
Seedily Products (800) 428.4442
Internet Address: htto l(www twrestotteso.wm
S723-SPP-068
TECHNICAL INFORMATION SHEET
f-SP-216
i t OT2006
'Firestone
SPECIALTY PRODUCTS
UltraPly TM TPO
Bonding Adhesive
Firestone Item Number:
W56TP03005: 18.9 Liters (5 gal) pails
DESCRIPTION:
Firestone UltraPly TPO Bonding Adhesive is a solvent based
contact adhesive designed specifically for bonding approved
Firestone membranes to approved insulations in addition to
wood, metal, masonry and other acceptable substrates.
METHOD OF APPLICATION:
1. Surfaces that will receive Firestone UltraPly TPO
Bonding Adhesive must be clean, smooth, dry, free of
sharp edges, loose and foreign materials, oil, grease,
and other contaminants.
2. Stir the adhesive thoroughly (to achieve a uniform mix
with no sediment on the bottom and no marbling
evident) before and during use.
3. Apply Bonding Adhesive at about the same time to both
the exposed underside of the sheet and the substrate to
which it will be adhered so as to allow approximately the
same drying time.
4. Apply Bonding Adhesive evenly avoiding areas of
accumulation.
5. Apply the Bonding Adhesive with a solvent resistant
paint roller, and roll the adhesive onto the mating
surfaces. When applying Bonding Adhesive, ensure
complete uniform coverage of both surfaces that will be
adhered. Care must be taken not to apply Bonding
Adhesive over seam areas.
6. UltraPly Bonding Adhesive can be dispensed by means
of Garlock Power Roller or Garlock Spray Equipment.
Other equipment may be used as recommended by the
manufacturer for application of this adhesive.
Garlock 25T Power Roller:
• 4 CFM Compressor, 0.41 - 0.55 MPa (60 - 80 psi) Air
Pressure
• 94.64 L (25 gal) Tank
• (2) 19.05 mm (0.75') Hoses x 9.14 m (30.0') Long with
Swivels
• (2) 457.2 mm (18.0') Roller Head Assemblies
PRODUCT DATA
Proasrty
Base:
Color.
Solvents:
Viscosity:
Weight:
Specific Gravity:
VOC:
Minimum Performance
A blend of Polychloroprene and SBR rubbers
Yellow
A blend of Acetone, Hexane, Toluene and Xylene
3,300.3,800 cps, with R.V.F. spindle @ 10 rpm
0.79 - 0.89 kg/L (6.6 - 7.4 lb/gal)
0.7909 - 0.8868
633 g/L (5.28 Ib/gal)
Physical Characteristics:
1. Excellent resistance to aging.
2. Good resistance to heat, cold, and water.
3. Excellent tack time foryersaWiry. of installation.
METHOD OF APPLICATION (Con't):
Gadock 314 Glue Machine:
• 3.785 Umin (1 gal/min) low
• 27.58 MPa (4,000 psi) rated
• 25.4 mm (1.0") Intake Pipe
• 7.62mor15.24mof12.7mm(25.0'or50.0'of0.5")hose
suitable for solvent based adhesives and/or
cleaning/flushing solvents
• Tip Size: 5.84 mm - 7.87 mm (0.023" - 0.031")
• Ground Machine to Approved Source
Garlock Commander 2120 Assembly:
• 18.93 Umin (5 gal/min) flow
• 8.27 MPa (1200 psi) minimum
• 15.24mor30.48mof12.7mm(50.0'- 100.0'of0.51hos
suitable for solvent based adhesives and/or
cleaning/flushing solvents
• Tip Size: 5.84 mm - 7.87 mm (0.023' - 0.031")
• Ground Machine to Approved Source
Notes: Spray applied bonding adhesive requires back roiling
with 228.6 mm (9.0') wide solvent resistant roller
(medium nap) to insure 100% coverage of the
adhesive on the substrate and membrane.
S723-SPP-069
TECHNICAL INFORMATION SHEET
FSP-216
1 1.072008
7. Allow Bonding Adhesive to flash oft until tacky. Touch
down on the Bonding Adhesive surface with a clean, dry
finger to be certain that the adhesive does not string. As
you are touching the adhesive, pushing straight down to
check for stringing, also push forward on the adhesive at
an angle to ensure that the adhesive solvents have
flashed off and are ready throughout its thickness. If
either motion exposes wet areas or sticking when the
finger is lifted, then It is not ready for mating. Flash off
time wiU vary depending on ambient conditions.
8. Starting at the fold, roll the previously coated portion of
the sheet Into the coated substrate slowly and evenly so
as to minimize wrinkles. To ensure proper contact,
compress the bonded half of the sheet to the substrate
with a stiff push broom using heavy pressure
immediately after mating.
SHELF UFE:
1. Shelf life of one (1) year can be expected If stored in
original unopened container at temperatures between
15.6 - 26.7° C (60 - 80° F).
2. Shelf life will be shortened If exposed to elevated
temperatures.
3. Rotate stock to insure stored material will not go beyond
the shelf hfe of one (1) year.
STORAGE:
1. Store in original unopened containers at temperatures
between 15.6 - 26.7° C (60 - 80° F) until ready for use.
2. If exposed to lower temperatures, restore to room
temperature prior to use.
3. Keep the material out of direct sunlight until ready for
immediate application.
COVERAGE RATE:
1. A coverage rate of 1.10-1.47 m2/L (45-60 ft2lgal) may be
obtained depending on the substrate. Some insulation
surfaces are more uneven and porous and will result in
a lower coverage rate while smooth non -porous
substrates will result in higher coverage rates. Rates
are based on roller application to both mating surfaces.
2. Very porous substrates (rough wood, concrete block)
may require two coats of Bonding Adhesive, to ensure
proper adhesion. This can be determined by testing a
small area. Check by adhering a small piece of
membrane to the porous substrate to verify the bonding
strength.
The swot meant two, to boron! Feessne s podtds and apaolbays aaanoinn ■ Sabot to wlwp Mahal
solo, Presto,* takes ,asponaorty for W nennp cooly matesb. Wish maw Faawtr,ea Farah., product
epeolWlon NnearerFoewpne(self rtsrepewWwnesInaba days. FetlMa,eoleo roa,taaenonma
ema+Wy deaams any ,e!spmsbbty Por ar eota dm.. Glary pry :100 %W a. probes stay a ammo/ 11 d,rsbn
arse as to ate sowgnea of a prgmi, a as eery to support a palmed arublbn property be Oaaatelwtl dean
opsone or comment deegn agafeers Wore plooeedr,y Asolone ecceple no !Malty for any Wars IX brresdant
damays, aro no Freston Reyesentae e a Arbon/ad to wry this daelarMr
'prestone
SPECIALTY PRODUCTS
UltraPly TPO
Bonding Adhesive
PACKAGING:
18.9 Liters (5 gallon) pails are packaged 45 pails per pallet
PRECAUTIONARY DATA:
1. Review Material Safety Data Sheet (MSDS) prior to use.
2. Flammable. Keep away from fires (open flame) and
other possible ignition sources during storage and use.
Do not smoke when using.
3. Red caution labels are required when shipping.
4. For professional use only.
5. Use only in well ventilated areas.
6. Avoid prolonged contact with skin.
7. Mix thoroughly before and during use.
8. Thinning is not allowed.
9. Keep out of reach of children.
10. Do not contaminate with foreign materials.
LEED INFORMATION:
Post Consumer Recycled Content: 0%
Post Industrial Recycled Content: 0%
Manufacturing Location: South Bend, IN
Firestone Specialty Products
250 West 9801 Street, Indianapolis, Indiana 48280
Specialty Products (800) 42B4442
Internet mess: http.11www Iireoio_nesp.com
S723-SPP-069
TECHNICAL INFORMATION SHEET
FSP-802
11,07 2008
"Firestone
SPECIALTY PRODUCTS
UItraPIyTM TPO
inside/Outside Corner
Firestone Item Number
WS6TPO3010: 22.86 cm x 22.86 cm (9.0" x 9.0")
White
DESCRIPTION:
UltraPly TPO Inside/Outside Comers are made from a
flexible non -reinforced thermoplastic polyolefin membrane
and are specifically designed to be used in roofing
applications for flashing inside and outside comers on curbs,
parapets and scuppers. They may also be used as a square
tube flashing, up to 32.26 cm2 (5 in2), by using four outside
corners. UltraPly TPO Inside/Outside Comers come pre-cut
into individual corners for ease of application.
PREPARATION OF SUBSTRATES:
Prepare UltraPly TPO Inside/Outside Corner areas by
removing all dirt and debris from the membrane surface,
cleaning the surface area of the field sheet and the inside
and outside comers with Firestone Splice Wash prior to
installation of the UltraPly TPO Inside/Outside Corner.
METHOD OF APPLICATION:
Round off all corners prior to heat welding into place per
current Firestone Specialty Products specifications and
details. Care should be given during the heat welding
process In order to prevent heat build up that could bum or
damage the TPO molded corner.
STORAGE:
Store material in its original unopened packaging away from
sources of physical damage or chemical contamination.
PACKAGING:
UltraPly TPO Inside/Outside Comers are packaged with 20
pre-cut corners per carton.
Too soma 4 man 0Nyf0 nuNent Foosrones pooggs ao apaalmme Vaa°remi°r4ry togfatpe whoa
aaYs F.eabne Was oeapaWay for lurneehnpor MAMMY, Was, mat Fremont WctaMa pgodaa
apecRggaon as Noma, Foam.. pail nor h,eposomanres pulp Otop,. FFspm, anent no apron on s.d
equaaetyolcaoo any reaponr'Wityta. ewseonanen of was Paul an Odor p pada* may h owes a
oopo nces erne a to P e sourgnaa or a prgec1 Ca Is■Way to auptna a Monad styaybN n mom*. h. Own(
aproo o or oaaAete t °mg. anparoera tetra ;meadow Fraatano sawn no long** orgy Wire a to
metal aamipasails ro F,rastane RapWntab.o a aulnantaa ro My ane arimgor
PRODUCT DATA
Property Minimum Performance
Overall Size: 22.86 crn x 22.66 cm (9.0" x 9.0")
Comer Size: 76.2 mm x 76.2 mm x 82.5 mm (3.0° x 3.0' x 3.25')
Thickness: 1.14 mm (0.045') min
Proosrtv Test Method, Typical Values
Thickness: ASTM D-638 1.14 mm (0.045') +/- 10% min
Tensile Strength: ASTM D-638 12.3 MPa (1780 psi)
Elongation @ Break: ASTM D-638 750% min
Tear Resistance: ASTM D-1004 49 N (11 Ibf)
(Die C)
Brittleness Point ASTM D-2137 -40° C (-40° F) min
Properties Attar Heat Aging (166 hours f 116° C (240° F))
Tensile Strength: ASTM D-638 12.8 MPa (1850 psi)
Elongation: ASTM D438 650% min
Tear Resistance: ASTM 0-1004 40 N (9 Ibf)
(Die C3
PRECAUTIONARY DATA:
1. Exercise caution when lifting, moving, transporting,
storing or handling UltraPly TPO Inside/Outside Comers
to avoid sources of punctures, physical damage or
chemical contamination.
2. Contact Firestone Specialty Products for specific
recommendations regarding chemical or waste product
compatibility with UltraPly TPO Inside/Outside Comers.
LEED INFORMATION:
Post Consumer Recycled Content:
Post Industrial Recycled Content:
Manufacturing Locations:
0%
0%
Wellford, SC
Firestone Specialty Products
250 west 96" Street, indtenapolis, Indiana 441260
Specialty Products (800) 428-4442
Internet Address: hBo:IAvww firesloneso.com
S723-SPP-096
TECHNICAL INFORMATION SHEET
"Firestone
BUILDING PRODUCTS
AII-Purpose Fastener
Red Fasteners,
1 1/4" W56RAC4200
1 5/8" W56RAC4201
21/4" W56RAC4202
2 7/8" W56RAC4203
3 1/4" W56RAC4204
3 3/4" W56RAC4205
4 1/2" W56RAC4206
5" W56RAC4207
6" W56RAC4208
7" W56RAC4209
8" W56RAC4210
Product Information
Description:
Firestone All -Purpose Fasteners are used in rooting applications for the attachment of roofing insulation and base sheets
in combination with Firestone Insulation Plates and attachment of Firestone Batten Strips, Seam Plates, Termination Bars,
and other accessories to steel and wood substrates where approved by Firestone Technical Specifications. The
Firestone All -Purpose Fastener is Factory Mutual (FM) approved.
'NOTE: Firestone is not responsible for, nor guarantees that the white coating will remain on the fastener during or after
installation. Because the coating on Firestone white fasteners is removed to some degree during the installation process,
Firestone suggests that 1) the building owner be made aware of the expectations of the white fasteners and that
repainting of the deck may be required after roofing is complete or 2) any deck painting take place after the roof is
installed. In this case, any color of screw will work.
White Fasteners*
1 1/4" W56RAC4199
21 /4" W56RAC4215
2 7/8" W56RAC4216
3 1/4" W56RAC4217
3 3/4" W56RAC4218
4 1/2" W56RAC4219
5" W56RAC4220
6" W56RAC4221
7" W56RAC4222
8" W56RAC4223
Product Packaging
Screw Lena)
Thread Lenath
Pieces oar Plastic Pail
Palls Der Pallet
1 1/4" (31.75 mm)
Fun
1,000
60
1 5/8" (41.28 mm)
Full
1,000
60
2 1/4" (57.15 mm)
Fun
1,000
60
2 7/8" (73.03 mm)
Full
1,000
60
.--3 1/4" (82.55 mm)
3" (76.2 mm)
1,000
60
3 3/4" (95.25 mm)
3" (76.2 mm)
1,000
60
4 1/2" (114.3 mm)
3" (76.2 mm)
^ 1,000
60
5" (127.0 mm)
4" (101.6 mm)
1,000
60
6" (152.4 mm)
4" (101.6 mm)
1,000
60
7" (177.8 mm)
4" (101.6 mm)
500
60
8" (203.2 mm)
4" (101.6 mm)
500
60
Method of Application:
1. Using the #3 Phillips tip provided, and a variable speed drill, engage the fastener into the deck as noted below. Take
care not to over or under drive the fastener. Threads must engage the decking material per Firestone Technical
Specifications.
S723-RFS-076
Firestone Building Products I sales: (800) 428-4442 I Technical (800) 428-4511 I www.flrestonebpco.com
TIS#1001
Page 1 of 2
1/11/2013
TECHNICAL INFORMATION SHEET
'Firestone
BUILDING PRODUCTS
All -Purpose Fastener
2. Determine screw length as follows:
a. Steel Decks: Select fastener length to penetrate through the deck a minimum of 3/4" (19.1 mm).
b. Wood Decks: Select fastener length to penetrate into or through the deck a minimum of 1" (25.4 mm).
3. AII-Purpose fasteners may not work as expected through existing roof systems or unusual substrates. Consideration
should be given to using Firestone HD fasteners in these instances.
Storage:
Store in original, unopened packaging protected from the weather.
Precautions:
Eye protection must be wom during the installation of the fasteners.
LEED® Information:
Postconsumer Recycled Content: 15%
Preconsumer Recycled Content: 10%
Manufacturing Location: Bryan, OH
Physical Properties
P.rmt
Tvolcal Performance
Material:
S
SAE 1022. Heat Treated Steel
Thread Size:
0.235' (6.5 mm)
Threads/Inch:
13
Thread Design:
Symmetrical
Fastener Tip:
Drill point
Fastener Head:
63 Phillips drive
Pullout in New 22 gauge (0.76 mm)
Steel Deck:
Grade C (Grade 33):
360 to (163.3 kg
Grade E (Grade 80):
400 lb (191.4 kg)
Pullout in New 3/4" (19.0 mm) Plywood
400 lb (191.4 kg)
Corrosion Resistant Coating:
Electrocoating of Firestone's Red and White fasteners both exhibit 15% or less red rust
after 30 cydes of Kestemich and exceed requirements of FM 4470.
Please contact your Firestone Roof Systems Advisor at 1-800-428-4511 for further information.
This sheet is meant to highlight Firestone products and specifications end is subject to change without notice. Firestone takes responsibility for
furnishing quality materials which meet published Firestone product spetxTrcettons. Neither Firestone nor its representatives practice amhitectu,e.
Firestone otters no opinion on end expressly disclaims any responsibility for the soundness of any structure. Firestone accepts no liability for structural
failure or resultant damages. Consult a competent structural engineer prior to installation 1/ the structural soundness or structural ability to properly
support a planned installation is in question. No Firestone representative is authorized to vary this disclaimer.
S723-RFS-076
Firestone Building Products I Sales: (800) 42844442 I Technical (800) 428.4511 I www.ltreetonebpco.com
TIS S 1001
Page 2 of 2
1/11/2013
TECHNICAL INFORMATION SHEET
Firestone
BUILDING PRODUCTS
UltraPlyTM TPO Cut Edge Sealant
Clean -Up:
Recommended cleaner is rubbing alcohol followed by soap and water.
Precautions:
1. Review Material Safety Data Sheets (MSDS) prior to use.
2. Flammable. Keep away from fire and open flames during storage and use. Do not smoke when using.
3. Use only in well ventilated areas.
4. Cover tightly when not in use.
5. Do not contaminate with foreign materials.
6. Do not thin.
7. UltraPly TPO Cut Edge Sealant is not to be used for splices.
LEER® Information:
Post Consumer Recycled Content: O%
Post Industrial Recycled Content: 0%
Manufacturing Location: South Bend, IN
e S Cal Pcopertres
Property
Base:
Typical Performance
Color.
Synthetic Rubber
Solvents;
White, Gray, or Tan
Viscosity:
Aromatic and Aliphatic
Weight/Gallon:
2,000 to 3,000 cps
Specific Gravity:
V.O.C. Content:
7.94 lb/gal (0.952 kg/L)
0.952
6.12 lb/gal (734 g/L)
Please contact your Firestone Roof Systems Advisor at 1-800-428-4511 for further information.
This sheet is meant to highlight Firestone products and specifications end is subject 10 change without notice. Firestone takes responsibility for
furnishing quality materials which meet published Firestone product specifications. Neither Firestone nor its representatives practice architecture
Firestone offers no opinion on and expressly disclaims any responsibility for the soundness of any structure. Firestone accepts no liability for structural
failure or resultant damages. Consult a competent structural engineer prior to installation if the structural soundness or structural ability to properly
support a planned installation is in question. No Firestone representative is authorized to vary this cGsclaimer.
S723-RFS-113
Firestone Building Producb I Sales: (800) 428.4442 I Technical (800) 428r 511 I www.fireatonebpco.com
TIS#1306
Page 2 of 2
09/18/2012
TECHNICAL INFORMATION SHEET
Virestone
BUILDING PRODUCTS
UltraPlyTM TPO T-Joint Cover
Item Description
White
Tan
Gray
Product Information
Item Number
W56TP03014
W56TPOT014
W56TPOG014
Description:
Firestone UltraPlym TPO T-Joint Covers are made from flexible, non -reinforced, thermoplastic polyolefin membrane.
They are designed to cover and seal T-joints formed at seam intersections and at angle changes 1:12 or greater for
UltraPly TPO membranes greater than 0.045" (1.14 mm) thick.
Method of Application:
1. Prepare T Joint area by removing all dirt and debris from membrane surface. Clean the surface area of the field sheet
and the T-Joint Cover with Firestone Splice Wash SW-100 or a Firestone approved membrane wash prior to
installation of Firestone UltraPly TPO T-Joint Covers.
2. Install UltraPly TPO T-Joint Covers in accordance with current Firestone UltraPly TPO roofing specifications and
details.
Storage:
Store material in its original unopened packaging away from sources of physical damage or chemical contamination.
Precautions:
1. Refer to Material Safety Data Sheet (MSDS) for TPO systems for safety information.
2. Contact your Firestone Technical Coordinator at 1-800-428-4511 for specific recommendations regarding
chemical or waste product compatibility with Firestone UltraPly TPO T-Joint Covers.
LEED® Information:
Post Consumer Recycled Content: O%
Pre Consumer Recycled Content: 0%
Manufacturing Location: Wellford, SC
Product Packaging
Units per Carton
Weight per Carton
100
_ 9 tb (4.1 kg)
Cartons _per Pallet
Weight per Pallet
100
900 lb (408 kg)
Product Data
Material:
Colors:
Nominal Thickness:
Width:
Thermoplastic Polydelin (TP0)
White, Tan, Gray
0.060" (1.52 mm) ± 10%
4" x 4" (102 x 102 trim) with 12" (13 mm) radius comers
S723-RFS-014
Firestone Building Products I Saks: (800) 428.4442 I Technical (SOO) 428-4511 l www.flrestonsbpco.com
TIS k 203
Page 1 of 2
1/8/2013
TECHNICAL INFORMATION SHEET
'Firestone
BUILDING PRODUCTS
UltraPlyTM TPO T-Joint Cover
PhyhsicaIJPrope,t
Test Method — ASTM Standard
12mpsm
Firestone Typical Performance
Membrane Thickness:
D 751
0.060" (1.52 mm)
Tensile Strength:
D 638
1,780 psi (12.3 MPa)
Elongation at Break:
D 638
750%
Tearing Strength:
1004 (Die C)
16 Ibf (71 N)
Brittleness Point:
D 2137
-40 °F (-40 °C)
Properties After Heat Aging (Retained Values) (166 h at 240 °F (116 °C)):
Tensile Stren.th:
D 638
1,550 psi (10.7 MPa)
Elongation at Break:
D 638
650%
Tearing Strength:
1004 (Die C)
1
12 Ibf (53 N)
Please contact your Firestone Roof Systems Advisor at 1-800-428-4511 for further information.
This sheet is meant to highlight Firestone products and specifications and is subject to change without notice. Firestone takes responsibility for
furnishing quality materials which meet published Firestone product specifications. Neither Firestone nor its representatives practice architecture
Firestone offers no opinion on and expressly disclaims any responsibility for the soundness of any structure. Firestone accepts no lability for structural
Wine or resultant damages. Consult a competent structural engineer prior to installation if the structural soundness or structuret ability to properly
supper a planned installation is in question. No Firestone representative is authorized to vary this disclaimer.
S723-RFS-014
Firestone Building Products Sales: (800) 420-44421 Technical (800) 428.4511 I www.itrestonebpco.com
TIS # 203
Page 2 of 2
1/8/2013
TECHNICAL INFORMATION SHEET
'Firestone
111111011110 PRODUCTS
UltraPlyTM TPO Universal Pipe Boot TIS#215
Item Numbers:
White W56TP0301U
Tan WS6TPOTO1U
Gray WS6TPOGO1U
Description:
UltraPly TPO Universal Pipe Flashing is specifically designed for the flashing of round penetrations.
UltraPly TPO Universal Pipe Flashing fits various penetrations from 1" (25 mm) to 6" (150 mm).
The UltraPly TPO Universal Pipe Flashing must be cut to correct size before installation.
Method of Application:
1. UltraPly TPO membrane shall be clear of ail dust, dirt and other contaminants prior to
Installation of the UltraPly TPO Universal Pipe Flashing.
2. Penetration shall be dean of foreign material and any old flashing materials.
3. Cut out a circle, above the rib, on the outside of a level ring of the UltraPly TPO Universal Pipe Flashing that is smaller than the
penetration.
4. Cut the extra material from the pipe flashing base around the Indented dreie.
5. Heat -weld the flashing into place and install the clamp and sealant per current UltraPly TPO specifications.
Storage:
• Store material in its original unopened packaging away from sources of physical damage or chemical contamination.
Precautions:
• Do not install over uneven substrates.
• Refer to Material Safety Data Sheet for RefexEON TPO systems.
Packaging:
Units per Carton J 10 with 10 stainless steel clamps included
Compliance:
Post Consumer Recycled Content: 0%
Pre Consumer Recycled Content: 0%
Manufacturing Location: Wellford, SC
Product Data:
Material Thermoplastk Polyolefin (TPO)
Colors White, Tan, Gray
Clomp Stainless steel - worm gear type
Pipe Flange 13" (330 mm) diameter
Thickness 0.055"-0.075" (1.4 mm-1.9 mm)
Fits the Pipe Outside Diameters listed below:
1" 25 mm
191" 38 mm
2" 50 mm
3" 76mm
4" 102 mm
5" 127 mm
6" 152mm
Please Contact your Freston Technical Coordinator at 1-800-428-4511 for further information.
This sheet is meant to *Might Firestone products and speeyiwelans and is subject to change without notice. Firestone token responsibility
meet published Firestone product speeifscotbnt. Neither firestone nor its representatives forJu on andhow Ou•er arddisclai whoo
responsibility Pt the soundness of ony structure. Rresfone Dote practice architecture. onf damages.
offers It opinion and aural en ineer po r to
pis no !lability for structural failure or rewltont damages. Consult o competent structure! engineer prat to
Installation H the strvctutelsoundness w structural ability to poperie support o planned Installation is in question. No Firestone representative is authorized to vary the disclaimer.
Redone euAfing Peodurds • 250 W. 96"Street Indianapolis, IN 46260 • Sales: (900) 4284442 • Technical (90D)4284511 • www.flnsionebpm mm
S723-RFS-217
12162011
TECHNICAL INFORMATION SHEET
Varestone
BUILDING PRODUCTS
UltraPlyTM TPO Unsupported Flashing
Item Description Item Number
1 Roll — White (24" x 50' (610 mm x 15.2 m)) W56TP03017
1 Roll — Tan (24" x 50' (610 mm x 15.2 m)) W56TPOT017
1 Roll — Gray (24" x 50' (610 mm x 15.2 m)) W56TPOG017
Product Information
Description:
Firestone UltraPtyn TPO Unsupported Flashing is a non -reinforced, thermoplastic polyolefin membrane. It is used in
roofing applications where Firestone pre -formed TPO accessory products are not appropriate. Firestone UltraPly TPO
Flashing is available in white, tan and gray.
Roll Length 50' (15.2 m)
Roll Weight
Roll Width 24" (610 mm) Rols per Pallet
Each roll is wrapped around a core and covered with white opaque poly.
20 lb (9 kg)
30
Method of Application:
1. Substrates must be clean, dry, smooth, and free of sharp edges, fins, loose or foreign materials, oil, grease, and other
materials that may damage the TPO Unsupported Flashing.
2. All roughened surfaces that can damage the flashing shall be repaired as specified to make a smooth substrate.
3. All surface voids greater than 1/4" (6.3 mm) wide shall be properly filled with an acceptable fill material.
4. Install the Firestone UltraPly TPO Unsupported Flashing material with the appropriate heat welding equipment in
accordance with current Firestone UltraPly TPO specifications, details and workmanship requirements.
Storage:
Store material in its original unopened packaging away from sources of physical damage or chemical contamination.
Precautions:
1. For safety information, refer to Material Safety Data Sheet (MSDS) for TPO systems.
2. Exercise caution when lifting, moving, transporting storing or handling flashing rolls to avoid sources of punctures,
physical damage or chemical contamination.
3. Contact your Firestone Roof Systems Advisor at 1-800-428-4511 for specific recommendations regarding
chemical or waste product compatibility with Firestone UltraPly TPO Unsupported Flashing.
LEED® Information:
Post Consumer Recycled Content: 0%
Pre Consumer Recycled Content: 0%
Manufacturing Location: Weltford, SC
Tuscumbia, AL
S723-RFS-013
Firestone Building Products I Sales: (800) 428-4442 I Technical (800) 428-4811 I www.arestonebpco.com
TIS # 202
Page 1 of 2
1/8/2013
TECHNICAL INFORMATION SHEET
°Firestone
BUILDING PRODUCTS
UltraPlyTM TPO Unsupported Flashing
Product Data
Material:
Colors:
Nominal Thickness:
Width:
Therm
oplssticPolyooefin (TPO)
White, Tan, Gray
0.060' (1.52 mm)
24" (610 mm)
°,Phys cai,Pro.perties
Property
Teat M od h—ASTMS ndar4
r. ..��_
Firestone Typical Performance
Membrane Thickness:
0 751
0.060" (1.52 mm)
Tensile Strength:
D 638
1,780 psi (12.3 MPa)
Elongation at Break:
D638
750%
Tearing Strength:
1004 (Die CI_
16 lbf (71 N)
Brittleness Point
D 2137
-40 °F (-40 °C)
Properties After Heat Aging (Retained Values) (166 h at 240 °F (116 °C)):
Tensile Strength:
D 638
1,550 psi (10.7 MPa)
Elongation at Break:
D 638
650%
Tearing Strength:
1004 (Die C)
12 Ibf (53 N)
Please contact your Firestone Roof Systems Advisor at 1-800-428-4511 for further information.
This sheet is meant to highlight Firestone products and specifications and is subject to change without notice. Firestone takes responsibility for
furnishing quality materiels which meet published Firestone product specifications. Neither Firestone nor its representatives practice architecture
Firestone offers no opinion on and expressly dttsdaims any responsibility for the soundness of any structure. Firestone accepts no liability for structural
failure or resultant damages. Consul a competent structural engineer prior to installation if the stnrdurei soundness or stru ural ability to property
support a planned installation is In question. No Firestone representative is authorized to very this dsdaimer.
6723-RFS-013
Firestone Building Products I Sales: (B00) 42844421 Technical (800) 4284511 1 www.firestonebpco.corn
TIS Si 202
Page 2 of 2
1/8/2013
TECHNICAL INFORMATION SHEET
°Firestone
BUILDING PRODUCTS
Water Block Seal (S-20)
Item Description Item Number
Cartridge: 10 fl oz (300 mL) W563587071
Carton: 25 Cartridges
2011110
Product Information
Description:
Water Block Seal (S-20) is designed to provide a seal when used in compression as required by Firestone Details.
Product Packaging
Cartridge:
Carton:
10 fl oz (300 mt.)
25 Cartridges
Carton Weight:
_ Approxkrrateiy 27 lb (12 kg)
Method of Application:
1. Surfaces which Water Block Seal (S-20) is applied shall be free from loose concrete, stone, mortar, foreign materials,
and other contaminants.
2. Apply a 3/8" (9.5 mm) to 1/2" (12.7 mm) bead to substrate surface.
3. Bring the mating surface of the flashing membrane into contact with the Water Block Seal (S-20).
4. Roll or press the flashing membrane firmly against the Water Block Seal (S-20) and substrate, avoiding wrinkles.
5. Complete the detail per Firestone Specifications and Details.
Storage:
• Store in original unopened containers, at temperatures between 60 and 80 °F (15.6 and 26.7 °C) until ready for use.
• When exposed to lower temperatures, restore to room temperature prior to use.
• For optimum results, rotate stock to ensure stored material has not exceeded the shelf life of one (1) year.
Shelf Life:
• Shelf life of one (1) year can be expected when stored in original sealed containers at temperatures between 60 and
80 °F (15.6 and 26.7'C).
• Shelf fife will be shortened if exposed to sustained elevated temperatures.
Coverage Rate:
Coverage of approximately 10' (3.1 m) per cartridge of 3/8" to 1/2" (9.5 to 12.7 mm) bead.
Clean -Up:
Recommended cleaners are mineral spirits, naphtha, or kerosene.
8723-RFS-111
Firestone Building Product 1 Sales: (800) 428.4442 f Technical (800) 428-4511 1 www.Brestonebbpco.com
TIS # 1304
Page 1 of 2
1/24/2013
TECHNICAL INFORMATION SHEET
Virestone
BUILDING PRODUCTS
Water Block Seal (S-20)
Precautions:
1. Review Material Safety Data Sheet (MSDS) prior to use.
2. Flammable. Keep away from fire and open flames during storage and use. Do not smoke when using.
3. Do not thin.
4. Do not contaminate with foreign materials.
5. Avoid prolonged contact with skin.
6. Use only in well ventilated areas.
7. Water Block Seal (S-20) is not designed to be used as an exposed caulk.
LEED® Information:
Postconsumer Recycled Content: 0%
Preconsumer Recycled Content: 0%
Manufacturing Location: Evansville, IN
Pf yslcal :Prope .: lee
Property
Tvofgl Performance
Base:
Butyl Rubber
Color.
Gray
Solvents:
Heptane
Solids:
86%
Viscosity at 80 °F (27 °C):
1,6000,000 t 300,000 cps
Specific Gravity:
1.31
Weight/Gallon:
10.93Ib/gal (1.31 kg/L)
V.O.C. Content
1.47 Ib/gal (176 g/L)
Please contact your Firestone Roof Systems Advisor at 1-800-428-4511 for further information.
This sheet is meant to highlight Firestone products and specifications and is subject to change wthout notice. Firestone takes responsibility for
fumishmg quality materials which meet published Firestone product specifications. Neither Firestone nor its representatives practice architecture
Firestone offers no opinion on and expressly cisdeims any responsibility for the soundness of any structure. Firestone accepts no liability for struclwal
failure or resultant damages. Consult a competent structural engineer prior to installation if the structural soundness or structural ability to property
support a planned installation is in question. No Firestone representative is authorized to vary this disclaimer.
S723-RFS-111
Firestone Building Products I Sales: (800) 428-4442 I Technical (800) 428-4511 I www.flreetonebpco.com
TIS ft 1304
Page 2 of 2
1/24/2013
Industrial Smoke Hatch and
(Optional) Security Grill
Copolyester Triarch
Model SSV
Frame Material
Steel
Bristolite copolyester glazing has
been load tested and complies with
OSHA — CFR's for fall protection.
Details (Scale: 2":1'-4")
SSV-SF-2
SSV-CM-2
Specifications
Trituff Smoke Hatch shall be model No. as manufactured by
Bristolite Daylighting Systems, Santa Ana, CA. Smoke Hatches shall
be glazed with a plastic dome using Trituff UL972 listed material. The
dome is attached to an openable frame, which in turn is attached to
the base frame with a hinge. This frame is compression loaded by
torsion springs and secured on the opposite side with latches
operated either manually, or by UUFM listed fusible links. All frames
to be fully welded for water tight integrity. The frame is to have an
integral condensation channel to carry moisture to the exterior. The
dome retaining fasteners are to be corrosion resistant. The base
frame is fabricated of galvanized steel and shall be installed either on
a 1-1/2" wide curb furnished by others or on its own 4", 9", or 12"
high self flashing curb fabricated from galvanized steel with a 2-3/4"
roof flange. Materials are to be self extinguishing Approved Plastic
CC-1 Rated.
Sizes:
Model
Number
4848-SSV
Inside Curb
Dimension
48' x 48"
Model
Number
Inside Curb
Dimension
Model
Number
4896-SSV
Inside Curb
Dimension
48" x 96"
Model
Number
Solar Heat Gain Coefficient = .50, U Factor = .65, Visible Light Transmission = 60'Yo (Typical for HS1 double glazed units)
Inside Curb
Dimension
Features:
1. Curb Mounted (CM) or Self Flashing (SF)
2. White Copolyester Glazing (HSI)
3. Exterior and/or Interior Manual Releases (M1, M2 or M3)
4. Fusible Link Temperatures: 165°, 212°, 286°, 360° or 520°
Add highlighted suffixes to model number where applicable:
i.e. 4848-SSV-CM-2-HS1-M1
Options:
1. Insulating Double Domes (2) or Single Dome (1)
2. Polycarbonate Dome (PC) (inner dome only)
3. Self Flashing Bases of 9" or 12" (9 or 12)
4. Insulated Frame (INS)
5. Double Wall Frame (DW)
Accessories: See PDS (Product Data Sheets) for these Items
1. Gladiator
a. Structural Curb (SC)
b. Security Grills (SG)
c. Safety Screens (SSCRN)
2. Quickkit (Installation Kits)
a. Stainless Steel (QKSS)
b. Zinc Plated (QKZP)
Bristolite Daylig tirig Sys t nos
401 E. Goetz Avenue
Santa Ana. CA 92707
sales@bristolite.com
www.bristolite.com
800.854,8618
714.540.8950
Fax 714,540.5415
PDS-1902-SH
EXTERIOR
RELEASE
MANUAL
GALV. STEEL DOME FRAME
SANTOPRENE BULB GASKET
__ SINGLE DOME GLAZING
LATCH ASSEMBLY
!
Y(
0
41
0
MO
P il
TRITUFF TRIARCH DOME DETAIL
_
®
a'
®_.,'
0
i k'
0
*
0
0
Is
�,
��
g
TENSION SPRING UL/FM FUSIBLE LINK -� FA
GALV. STEEL CURB MOUNT FRAME
CURB ANCHORS 2X (1 1/2" NOM.) WIDE
REQUIRED BY OTHERS WOOD CURB BY OTHERS
'
Pal v.
INSIDE CURB DIMENSIONS
* FUSIBLE LINK TEMPERATURE
TRITUFF CURB MOUNTED SMOKE VENT
PLEASE SELECT ONE:
165° 0 212° 0 286° 0 360° O
i
MODEL: SS V�/ -CM-HS1-M F-OR
SSV - GALVANIZED STEEL FRAME SMOKE VENT MF - MILL FINISH
CM - CURB MOUNTED OR - OUTSIDE RELEASE
HS1 - TRITUFF TRIARCH DOME
NOT TO SCALE
MODEL
INSIDE CURB
QTY
DOME MATERIAL TESTED IN CONFORMANCE WITH:
NUMBER
DIMENSIONS
- HIGH WIND RESISTANT - DOME OF THIS UNIT HAS EXCEEDED 90MPH UPLIFT IN TESTING.
- BURN RATE - TRI-TUFF MATERIAL CLASSIFIED AS CC1 MATERIAL.
- TESTED AND MET LOAD REQUIREMENTS PER OSHA 29 CFR 1910.23 (e) (8).
"STANDARD
4848-SSV-CM
48" x 48"
TESTED AND MET REQUIREMENTS AS DESCRIBED IN PRESENTATION TO
CALIFORNIA OCCUPATIONAL SAFETY AND HEALTH STANDARDS BOARD - STATE
4896-SSV-CM
48" x 96"
24
STANDARD, TITLE 8, CHAPTER 4, SECTION 1632 (REPORT NUMBER 3075015-1).
- TESTING PERFORMED ON 48"x96" TRI-ARCH DOME.
Bristolitd Delighting Systems
CUSTOMER :
WAYNE'S ROOFING
PREPARED BY :
Gary Stella
JOB NO :
401 East Goetz Avenue, Santa Ana, CA. 92707
TEL 714.540.88950 / FAX 714.540.5415
^ •
PROJECT :
I /� 1 n I AND
SUBMITTAL DATE :
5/21 /2014
SHEET NO.:
x\Brfstolke\Inaustrfal\DWG\T4896 SSV{M-HS1-OR DWG
UMPCO CLIP.
OUTSIDE CURB DIMENSION
-.
i SEE ENGLARGEMENTS
'
INSIDE CURB DIMENSION
+0"
/
-1/4"
45/32" CRS.
1
--
_
- -- - -
TYP.
- ----- -
WELDED JOINTS - TYP.
Ti- C i
t
°N
I I
yl t
117/32"
et. 1Z
Z
v
I i
ZR7%
2i
"
Z
Iq
i gf
•
15/16"
r —
o�
I;
PLAN ON CLIP
0 5�16"
% "
' a w 8
I
'
L 0
N
I2" ELEVATION 7
0
1
UMPCO CORROSION /
12" CRS.
\ 00.162" GALVANISED.
I \ \
RESISTANT CLIPS WITH __.._._/
7/32" dia. HOLE
j"
TYP.
STEEL WIRE MESH - TYP.
-- EXISTING CURB
GLADIATOR SAFETY
SCREEN
MODEL: XXXX-SSCRN
MODEL
DIMENSIONS
QTY
MODEL
DIMENSIONS
QTY
MODEL
DIMENSIONS
QTY
SCALE(S): 1^:20" & 1^:2"
SQUARE
RECTANGLE
RECTANGLE - Leta
1414-SSCRN
13 3/4" x 13 3/4"
2230-SSCRN
21 3/4" x 29 3/4"
3746•SSCRN
36 1/2" x 45 3/4"
NOTES"
1919-SSCRN
18 1/2" x 18 1/2"
2237-SSCRN
21 3/4" x 36 1/2"
3775-SSCRN
36 1/2" x 74 1/2"
1. BRISTOLITE DROP -IN SAFETY SCREENS ARE ALL GALVANIZED STEEL. THEY ARE DESIGNED TO BE
2222-SSCRN
213/4" x 213/4•
22a6 SSCRN
213/4" x 45 3/4"
3859 SSCRN
371/2" x 581/2"
INSTALLED BEFORE THE BRISTOUTE SKYLIGHT OR SMOKE HATCH IS SET IN PLACE.
3030-SSCRN
29 3/4^ x 29 3/4^
2272-SSCRN
213/4• x 711/2^
4669-SSCRN
as 3/4" x 69"
2. SAFETY SCREEN: 4" x 4" GRID PATTERN, OSHA COMPLIANT PER 29 CFR ss. 1910.23 & ss. 1926.501.
3737-SSGRN
361/2" x 36 1/2"
2296 SSCRN
21 3/4" x 951/2"
4689 SSCRN
45 3/4• x 89"
4242-SSCRN
41 1/2" x 4 1/2"
3037-SSCRN
29 3/4" x 36 1/2"
4896-SSCRN
47 1/2" x 95 1/2"
4646-SSCRN
45 3/4" x 45 3/4"
3046-SSCRN
29 3/4"x 45 3/4"
48120-SSCRN
47 1/2" x 119 1/2"
4848-SSCRN
47 1/2" x 47 1/2"
24,14
3069-SSCRN
29 3/4" x 69"
5460-SSCRN
53 1/2" x 59 1/2"
5555-SSCRN
54 1/2" x 54 1/2"
3096-SSCRN
29 3/4" x 95 1/2"
6072-SSCRN
59 1/2" x 71 1/2"
6060-SSCRN
59 1/2" x 59 1/2"
3496•SSCRN
33 1/2" x 95 1/2"
6096-SSCRN
59 1/2" x 95 1/2"
CALL FOR ADDITIONAL SIZES
36120-SSCRN
35 1/2" x 119 1/2"
CALL FOR ADDITIONAL SIZES
Bristolite Daylighting Systems
CUSTOMER:
WAYNE'S ROOFING
PREPARED BY
Gary Stella
JOB No.:
401 East Goetz Avenue, Santa Ana, CA. 92707
TEL714.540.8950/FAX714.540.5415
nW(,_ I freTIMI• Y•1ecueOOMFNGG1nPDTlAre n noeuiruGS S b 0.
PROJECT:
TRANSPACIFIC 5 - 3501 Industry Dr. Fife. WA
SUBMITTAL DATE:
5/13/2014
SHEET NO.:
w u mitts istVIUndust\Glad01.V1 Oc-SSCRN.dw9
Wayne's Roofing, Inc.
13105 Houston Road
Sumner, WA 98390
www.waynesroofing.com
CERTIFICATIONS 3
TGFU.R9516 - Roofing Systems Page 49 of 50
Existing Roof System: — Class A, B or C insulated or un-Insulated EPDM roofing system covered with:
Membrane: — Firestone "UltraPly TPO XR 100" (45 mil), "UltraPly TPO XR 115" (60 mII) or TPO XR 135 (80 mil) adhered with
"UltraPly TPO XR Bonding Adhesive", 80 sq. ft./gal.
Class C
1. Deck: C-15/32 Incline: 1/4
Existing Roof System: — Class A, B or C covered with:
Insulation (Optional): — Periite or glass fiber, 3/4 to 2 in. thick, adhesive as listed under adhesives, Roof Deck Construction
Materials.
Base Sheet (Optional): — Type G1, G2 or G3.
Membrane: — "Firestone APP 160", "APP 160 P", ""Firestone APP 170° or "Monopiy Pius" (modified membrane), heat fused.
2. Deck: C-15/32 Incline: 1/4
Existing Roof System: — Class A, B or C covered with:
Insulation (Optional): — Periite or glass fiber, 2 in. max, mechanically fastened or hot mopped.
Base Sheet (Optional): — Type G1 or G2, mechanically fastened or hot mopped.
Membrane: — "Firestone APP 160", "APP 160 P", ""Firestone APP 170" or "Monopiy Plus" (modified bitumen), heat fused.
3. Deck: C-15/32 Incline: 1/2
Existing Roof System: — Class C covered with:
Membrane: — "Firestone APP 160", "APP 160 P", ""Firestone APP 170" or "Monopiy Plus" (modified bitumen), heat fused.
Surfacing: — Karnak Chemical No. 97, applied at 1 gal/sq.
4. Deck: NC Incline: 1/4
Existing Roof System: — Class A, B or C BUR, cap sheet or gravel surfaced, gravel to be maintained at 400 ibs/sq.
Insulation: — Dow Chemical USA "STYROFOAM Brand Recovery Board", 1 in. thick max.
Membrane: —'Standard RubberGard" (EPDM), 45 or 60 mli, mechanically fastened In accordance with the manufacturer's
Installation instructions.
Class A, B or C
1. Deck: C-15/32 Incline: 1
Existing Roof System: — Class A, B or C, BUR (smooth surface or cap sheet), to retain existing Classification, covered with:
Slip Sheet: — Atlas Roofing "FR 10" or "FR 11", one layer.
Membrane: — Firestone "UltraPly" (TPA) or "UltraPly TPO", mechanically fastened.
2. Deck: C-15/32 Incline: See below
Existing Roof System: — Any Class A, B or C Build -Up Roof System, to retain rating place.
Slip Sheet: — One layer "Versashield Underlayment", preliminary attachment.
Membrane: — Firestone .045 or .060; "LS-FR" (1/2:12); "RubberGard MAX" or 75 mil (1/2:12); "RubberGard MAX
FR" (1-1/2:12); UltraPly TPO (1:12); UltraPly (TPA) (1:12), EPDM membranes may be coated with "PC-100" at 1 gal/sq and
maintain rating.
3. Deck: C-15/32 Incline: 1/2
Existing Roof System: — Class A, B or C, BUR (mineral surfaced cap sheet), to retain existing Classification, covered with:
Membrane: — 60-mil. "UltraPly Fleece Backed Membrane" fully adhered with "XR Bonding Adhesive" applied at 80-ft2/gal.
4. Deck: NC (See Note 1) Incline: See Note 1
Insulation: — Any UL Classified, any thickness, adhered with "I50 TWIN PACK."
Membrane: — Any UL Classified modified bitumen system, BUR system or CPE, CSM, CSPE, EPDM, NBP, PIB, PVC, TPO or THE
membrane system suitable for use with any roof insulation.
Note 1: Classification (A, B or C) and maximum incline will be the same as that of the Classified Roofing System (TGFU) currently
limited to noncombustible deck.
S. Deck: C-15/32 Incline: 1/4
Existing Roof System: — To Maintain existing Classification, Any Class A, B or C Insulated or un-insutated
Type G3 mineral surfaced cap sheet, BUR or modified bltumen membrane roofing system covered with:
Membrane: — Firestone "UltraPly TPO XR 100" (45 mil), 'UltraPly TPO XR 115" (60 mil) or TPO XR 135 (80 mil) adhered
with ISO Spray S or XR Stick In full coverage or applied in ribbons/beads.
6. Deck: C-15/32 Incline: 1/2
Existing Roof System: — To Maintain existing Classification, Any Class A, B or C insulated or un-insulated
Type G3 mineral surfaced cap sheet, or APP modified bitumen membrane roofing system covered with:
Membrane: — Firestone "UltraPly TPO XR 100" (45 mil), "UltraPly TPO XR 115" (60 mil) or TPO XR 135 (80 mil)
mechanically attached.
7. Deck: C-1S/32 Incline: 1/2
http://database.ul.coin/cgi-bin/XYV/template/LISEXT/1 FRAME/showpage.html?name=T... 5/14/2014
ire stone •
BUILDING PRODUCTS COY
March 14, 2014
Waynes Roofing, Inc.
13105 Houston Rd E
Sumner, WA 983909208
To Whom It May Concern:
Please be advised that Waynes Roofing, Inc. is a licensed Red Shield applicator in good standing with Firestone
Building Products Company.
Waynes Roofing, Inc. is authorized with Firestone for EPDM effective 11 /22/82, APP effective 11 /22/82,
ULTRAPLY effective 1 1 /22/82 under license #01714.
Firestone is proud to include Waynes Roofing, Inc. into our family of Red Shield applicators.
If 1 may be of further assistance, please feel free to call my office.
Sincerely,
ki $Y-T.D.,,...L.,..._
Phil LaDuke
Director, Quality Assurance
PL/jas
3/14/2014
A Generation of Pezformana3 fireimd by a Cerdvy of Eqyaience
250 Plat 96dh Soeet • Inranapo1is, IN 46260.317-575-7000
Fax 317 57'S-7100
htdpr/1wvntitiresitonapco.avn
TGFU.R95 16 - Roofing Systems Page 50 of 50
1. Deck: NC
Existing Roof System: — Class A, B or C, BUR (smooth surface or cap sheet), to retain existing Classification,
covered with:
Slip Sheet: — Atlas Roofing "FR 10" or "FR 11", one layer or Type G2 Base sheet laid loosely including Firestone
M8 Base".
Membrane: — Firestone "UltraPly" (TPA) or 'UltraPly TPO", mechanically fastened.
8. Deck: C-15/32 Incline: Note*
gelding Roof System: — Class A, B or C roofing system, to retain the existing Classification, is covered with:
Slip Sheet (Optional): — One or more layers Elk VersaShield, Atlas FR 10 or FR 50
Insulation (Optional): — ISOGARD HO, RESISTA, I50 95 + GL any thickness
Membrane: — Firestone "RubberGard Max"EPDM, "FR RubberGard" EPDM, "FR-EPDM", RubberGard MAX FR
EPDM", 'Triumph FR", "Triumph LS-FR, Firestone "LS-FR", or UltraPly TPO and UltraPly TPO XR 100, 115 or 135
membranes mechanically fastened.
*Note -Max incline not to exceed that for which the existing roofing system is Currently Glassine°
9. Deck: NC Incline: Note'
Existing Fully Adhered Roof System: — Class A, 8 or C fully adhered EPDM roofing system, to retain the
existing Classification, when covered with:
Membrane: — "Standard RubberGard' or "Flre Retardant RubberGard" or any UL Classified Firestone EPDM
membrane, 45 or 60 mll, fully adhered with 'Firestone EPDM Low Rise Foam Adhesive" applied In full coverage or
ribbons up to 12 in. apart.
*Note- Incline of the existing rooting system limited to maximum of 1/2 inch.
FLUID APPLIED COATING SYSTEMS
Class A
Indine: 1/2
Surfacing: — Two coats of 'Industrial Aluminum Roof Coating" at 1-1/2 gal/suJcoat.
2. Deck: NC
Base Coat:
Elastomenc
Surfacing:
Elastomenc
3. Deck: NC
Base Coat:
Elastomeric
Surfacing:
Elastomenc
Incline: 2-1/2
— "Industrial Elastomeric Whets Roof Coating', "Industrial Elastomenc Gray Roof Coating", 'Industrial
Black Roof Coating", or "Industrial Elastomeric Tan Roof Coating"roof coating,1.5 gal/sq.
— "Industrial Elastomeric White Roof Coating', "Industrial Elastomeric Gray Roof Coating", "industrial
Black Roof Coating", or "Industrial Elastomeric Tan Roof Coating"roof coating, 1.5 gal/sq.
Incline: Unlimited
— "Industrial Elastomeric White Roof Coating", `Industrial Elastomeric Gray Roof Coating", "lndustnal
Blade Roof Coating', or'Industnal Elastomeric Tan Roof Coating"coating, 1 gal/sq.
— 'Industrial Elastomenc White Roof Coating", "lndustnal Elastomeric Gray Roof Coating", "Industrial
Black Roof Coating", or "Industrial Elastomeric Tan Roof Coating" roof coating, 1.5 gal/sq.
Trademark and/or Tradename: "Rhollex"
Lot Updated on 2014-05-12
Questions? Pnnt this oaoe
lerfri Af lip Pace Too
® 2014 UL LLC
When the UL Leaf Mark Is on the product, or when the word "Envlronmenr Is included In the UL Mark, please
search the UL Environment databax for additional Information regarding this product's certification.
The appearance of a company's name or product in this database does not In itself assure that products so
identified have been manufactured under UL's Follow -Up Service, Only those products bearing the UL Mark should
be considered to be Certified and covered under UL's Follow -Up Service. Always look for the Mark on the product.
UL permits the reproduction of the material contained in the Online Certification Directory subject to the following
conditions: 1. The Guide Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files)
must be presented In their entirety and In a non -misleading manner, without any manipulation of the data (or
drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from UL" must
appear adjacent to the extracted material. In addition, the reprinted material must include a copynght notice in
the following format: "® 2014 UL LLC".
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1 FRAME/showpage.html?name=T... 5/14/2014
Wayne's Roofing, Inc.
13105 Houston Road
Sumner, WA 98390
wwwva vnearooflna.eom
NAV\FS RUOI I%G, I.C.
`, .11 iI�ft
Ccri. it iif >--'i
SIIr1,.l N, WA
WARRANTIES 4
BUILDING ENVELOPE CARE AND MAINTENANCE GUIDE
(For Red Shield Warranted Roofing Systems)
Congratulations on your purchase of a Firestone Roofing System! Your roof is a valuable asset that should be properly
maintained. All roofs and roofing systems require periodic inspection end maintenance to perform as designed
and to keep your Limited Warranty In full force and effect.
I. The roof should be inspected at least twice yearly and after any severe storms. A record of all inspection and
maintenance activities should be maintained, including a listing of the date and time of each activity as well as the
identification of the parties performing the activity.
2. Proper maintenance and good roofing practice require that ponded water (defined as water standing on the roof
forty-eight hours alter it stops raining) not be allowed on the roof. Roofs should have slope to drain, and all drain
areas must remain clean. Bag and remove all debris from the roof since such debns can be quickly swept into drains
by rain. This will allow for proper water run-off and avoid overloading the roof.
3. The Firestone Roofing System should not be exposed to adds, solvents, greases, oll, fats, chemicals and the like. If
the Firestone Roofing System Is in contact with any such materials, these contaminants should be removed
Immediately and any damaged areas should be Inspected by a Firestone Licensed Applicator and repaired If
necessary.
4. The Firestone Roofing System is designed to be a waterproofing membrane and not a traffic surface. Roof traffic other
than periodic traffic to maintain rooftop equipment and conduct periodic Inspections should be prohlblted. In any
areas where periodic roof traffic may be required to service rooftop equipment or to facilitate inspection of the roof,
protective walkways should be installed by a Firestone licensed Applicator as needed to protect the roof surface from
damage.
5. Some Firestone roofing membranes require maintenance of the surface of the membrane:
a. ,&eooth-surfaced Firestone APP membranes should be coated with an approved liquid coating, such as
Firestone Aluminum Roof Coating or Firestone AcryliTop applied In accordance with Firestone specifications, in
order to maximize the service life of the membrane. If this coating Is not applied as part of the initial roofing
installation, it should be applied within the first five years after the roof Is installed to help protect the
membrane from surface crazing and cracking. In addition, this coating should be maintained as needed to re -
coat any areas that have blistered, peeled or wom through.
b. Granule-surfaced_Flrestone APP and SBS membranes do not normally require surface maintenance other
than periodic inspection for contaminants, cuts or punctures. If areas of granular loss ere discovered dunng
inspection, these areas should be coated with Firestone AcryNTop or other Firestone -approved coating applied in
accordance with Firestone specifications.
c. gravel -surfaced Firestone BUR membranes do not normally require surface maintenance other than
periudic inspection for contaminants or damage. If areas of gravel Toss are discovered during inspection, gravel
must be reinstalled into hot asphalt to protect the surface of the membrane. Coatings on smooth surface BUR
membranes must be maintained as needed to re -coat any areas that have blistered, peeled or worn through.
d. Firestone EPDM and TPO roofing membranes. do not normally require surface maintenance other than
periodic inspection for contaminants, cuts or punctures. Occasionally, approved liquid roof coatings, Such as
Firestone AcryliTop, are applied to the surface of EPDM membranes in order to provide a lighter surface color.
Such coatings do not need to be maintained to assure the performance of the underlying EPDM roof membrane,
but some maintenance and re -coating may be necessary In order to maintain a uniform surface appearance.
e. Firestone Una -Clad metal roofhno panels and trim do not normally require surface maintenance other than
periodic inspection for contaminants or damage. In addition, periodic cleaning of the surface may be required to
remove dirt and maintain the aesthetic appearance of the coated metal. Simple washing with plain water using
hoses or pressure spray equipment is usually adequate. If cleaning with agents other than water Is
contemplated, several precautions should be observed: (1) do not use wire brushes, abrasives, or similar
cleaning tools which will mechanically abrade the coating surface, and (2) cleaning agents should be tested In an
inconspicuous area before use on a large scale.
6. All metal work, including counter -fleshings. drains, skylights, equipment curbs and supports, and other Firestone
brand rooftop accessories must be properly maintained at all times. Particular attention should be paid to sealants et
Joints In metal work and (lashings. If cracking or shnnkage Is observed, the joint sealant should be removed and
replaced with new sealant.
7. Any alterations to the roof, Including but not limited to roof curbs, pipe penetrations, roof -mounted accessories, and
tie-ins to building additions must be performed by a IIcensed Firestone Licensed Applicator and reported to Firestone.
Additional information and reporting forms for roof alterations are available at www.firestonebpco,00rn.
8. Should you experience a leak:
(a) Check for the obvious: clogged roof drains, loose counterflashings, broken skylights, open grills or vents,
broken water pipes.
(b) Note conditions resulting In leakage. Heavy or light rain, wind direction, temperature and time of day that
the leak occurs are all -Important clues to tracing roof leaks. Note whether the leak stops shortly after each rain
or continues to drip until the roof is dry. If you are prepared with the fads, the diagnosis and repair of the leak
can proceed more rapidly.
(c) Contact Firestone Warranty Claims at 1-800-830.5612 as soon as possible...but please don't call until you
are reasonably sure that the Firestone Roofing System Is the cause of the leak.
Firestone feels that the preceding requirements mil assist you, the building owner, In maintaining a watertight roof for many years.
Your roof is an Investment, and maintenance is essential to maximize your return on thls Important Investment.
Tlrestone
i lill_1!_S_ J I•ir
NOBODY COVERS YOU BETTER'
250 West 961h St., Indianapolis, IN 46260
1-800-428-4442 •1-317-575.7003 • www.firestonebpco.00m
international Offices:
Canada: 2835 Argentia Road, Unit 92 • Mississauga, ON LSN 8G6 •800-428-4442 • www.lirestonebpco.ca
Europe: Hermesslraal 2C • 1930 • Zaventem, Brussels, Belgium • +32 2 7114450 • www.firestonebpco.com
Latin America: 8300 NW 53rd Skeet, Suite 8106 • Miami, FL 33166.305-471-0117 • Www.firestonebpoo.com
1 W71 — Item /815 (Replaces 07/08)-01
■
Roofing Guarantee a
Whereas WAYNE'S ROOFING, INCORPORATED, of Sumner. Washington
herein called "the Contractor," has completed application of the following roof
Owner SAMPLE WARRANTY
Address of Owner:
7)pe and Name ofBtdlding:
Location
Area of Roof:
Dote ofCompletio,,
Date Guarantee Expires:
Whereas, a the inception of such work the
materials or wonbn nahip fora Birthed period and sob •
Now, Therefore, the C
period of Two_{ 2Jbrat from the date
made such repairs to sold roof and c
applied by or through the Contractor or
This guarantee is made subject to the fo1
1. Specifically excluded from
omissions of other
foundation Setdemen
mof is applied, fan
building; vapor
of the foregoing this
s repaired
2. Th nn ctor is
mpositio . flub
3. owork Ibe
braces,, rani
roof, unless
7.
8.
In
•
I become null
provided an
lieu ofalI
s or exclusio
is ins t has
the root
y executed this
BY
such mar
contents
fey
f the
of any
unless Such
in said roof or
wotk in eetien , flues, vents. drains, sign
t; and no - , or orations shall be made to said
nity to ' - necessary roofing application
complied . Failure to observe this condition
paid ibr time and menu! cxpeoded in making
or work deck or is sprayed or flooded. unless
8 below. Areas !hat pond water shall not be
the Commerce has been paid in full for said roof in
applied
to is pronnptly notified of the alleged dthct in materials or
express or implied
day or , 200X
WAYNE'S ROOFING, INC.
131RS HOUSTON ROAD
SUMNER, WASHING -ION 91390
. rhC ciSs)10-4455 SEA420457540711
AUTHORIZED REPRESENTATIVE
Donald Cwalric, President
1
City of Tukwila
Department of Community Development
10/1/2014
Jim Haggerton, Mayor
Jack Pace, Director
DAN JOHNSON
13105 HOUSTON RD E
SUMNER, WA 98390
RE: Permit No. D14-0155
MIDLAND BUILDING #1
Dear Permit Holder:
In reviewing our current records, the above noted permit has not received a final inspection by the City of Tukwila Building
Division. Per the International Building Code, International Mechanical Code, Uniform Plumbing Code and/or the National Electric
Code, every permit issued by the Building Division under the provisions of these codes shall expire by limitation and become null
and void if the building or work authorized by such permit has not begun within 180 days from the issuance date of such permit, or if
the building or work authorized by such permit is suspended or abandoned at any time after the work has begun for a period of 180
days. Your permit will expire on 11/29/2014.
Based on the above, you are hereby advised to:
1) Call the City of Tukwila Inspection Request Line at 206-438-9350 to schedule for the next or final inspection. Each
inspection creates a new 180 day period, provided the inspection shows progress.
-or-
2) Submit a written request for permit extension to the Permit Center at least seven(7) days before it is due to expire.
Address your extension request to the Building Official and state your reason(s) for the need to extend your permit.
The Building Code does allow the Building Official to approve one extension of up to 180 days. If it is determined that your
extension request is granted, you will be notified by mail.
In the event you do not call for an inspection and/or receive an extension prior to 11/29/2014, your permit will become null and void
and any further work on the project will require a new permit and associated fees.
Thank you for your cooperation in this matter.
Sincerely,
Bill Rambo
Permit Technician
File No: D14-0155
6300 Southcenter Boulevard Suite #100 • Tukwila, Washington 98188 • Phone 206-431-3670 • Fax 206-431-3665
PERMIT COORD COPY
PLAN REVIEW/ROUTING SLIP
PERMIT NUMBER: D14-0155
PROJECT NAME: MIDLAND BUILDING #1
DATE: 05/22/2014
SITE ADDRESS: 350 MIDLAND DR
X Original Plan Submittal
Response to Correction Letter #
Revision # before Permit Issued
Revision # after Permit Issued
DEPARTMENTS:
Building Division E Fire Prevention
Public Works n
Structural
Planning Division
Permit Coordinator
PRELIMINARY REVIEW:
Not Applicable ❑
(no approval/review required)
DATE: 05/27/14
Structural Review Required
REVIEWER'S INITIALS: DATE:
n
APPROVALS OR CORRECTIONS:
Approved
Corrections Required
Approved with Conditions
Denied
(corrections entered in Reviews) (ie: Zoning Issues)
DUE DATE: 06/24/14
Notation:
REVIEWER'S INITIALS:
DATE:
Permit Center Use Only
CORRECTION LETTER MAILED:
Departments issued corrections: Bldg ❑ Fire ❑ Ping ❑ PW ❑ Staff Initials:
12/18/2013
WAYNE'S ROOFING INC
Page 1 of 5
C1440 Washington State Department of
Labor & Industries
WAYNE'S ROOFING INC
Owner or tradesperson
GUTHRIE, DONALD D
Principals
GUTHRIE, DONALD D, PRESIDENT
WETHERBEE, RODNEY ALLEN, VICE
PRESIDENT
WETHERBEE, KITTY, SECRETARY
WETHERBEE, WAYNE W, PRESIDENT
(End: 04/30/2007)
MANN, SHARON R, SECRETARY
13105 HOUSTON RD
SUMNER, WA 98390
253-863-4455
PIERCE County
License
Verify the contractor's active registration / license / certification (depending on trade) and any past violations.
Construction Contractor Active.
Meets current requirements.
License specialties
GENERAL
License no.
WAYNESR205Q5
Effective — expiration
11/25/1980— 05/02/2015
Bond
THE HANOVER INS CO
Bond account no.
1968027
$12,000.00
Received by L&I Effective date
04/11/2011 04/13/2011
Expiration date
Until Canceled
Bond history
Insurance
American Guarantee & Liability $1,000,000.00
Policy no.
GLA399116710
Received by L&I Effective date
04/24/2014 05/01/2014
Expiration date
05/01/2015
https://secure.lni.wa.gov/verify/Detail.aspx?UBI=600178144&LIC=WAYNESR205Q5&SAW= 06/06/2014