Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
Permit M14-0088 - CASCADE BEHAVIORAL HOSPITAL - AIR DISTRIBUTION SYSTEM IMPROVEMENTS
CASCADE BEHAVIORAL HOSPITAL 12844 MILITARY RD S M14-0088 Parcel No: Address: City of Tukwila Department of Community Development 6300 Southcenter Boulevard, Suite #100 Tukwila, Washington 98188 Phone: 206-431-3670 Inspection Request Line: 206-438-9350 Web site: http://www.TukwilaWA.gov 1623049001 12844 MILITARY RD S 2 MECHANICAL PERMIT Project Name: CASCADE BEHAVIORAL HOSPITAL Permit Number: M14-0088 Issue Date: 5/6/2014 Permit Expires On: 11/2/2014 Owner: Name: Address: Contact Person: Name: Address: HCH SPECIALTY CENTER 12844 MILITARY RD S ATTN ACCOUNTING DEPT, TUKWILA, WA, 98168 DAN JARDINE 2025 FIRST AVE, SUITE 300, SEATTLE, WA, 98121 Contractor: Name: ALPA CONSTRUCTION INC Address: 330 FAIRBANK ST, ADDISON, IL, 60101 ALPACCI865C7 License No: Lender: Name: Address: Phone: (206) 441-4522 Phone: (630) 628-7930 Expiration Date: 2/25/2016 DESCRIPTION OF WORK: IMPROVEMENTS TO EXISTING AIR DISTRIBUTION SYSTEM INCLUDING NEW AHU AND DUCTWORK Valuation of Work: $475,000.00 Type of Work: REPLACEMENT Fuel type: GAS Fees Collected: $5,221.72 Electrical Service Provided by: SEATTLE CITY LIGHT Water District: 20 Sewer Distric: VALLEY VIEW SEWER SERVICE Current Codes adopted by the City of Tukwila: Internations Building Code Edition: International Residential Code Edition: International Mechanical Code Edition: Uniform Plumbing Code Edition: 2012 2012 2012 2012 International Fuel Gas Code: WA Cities Electrical Code: WA State Energy Code: 2012 2012 2012 Permit Center Authorized Signature:(} /0/4\ota Date: 44t di I hearby certify that I have read and examined this permit and know the same to be true and correct. All provisions of law and ordinances governing this work will be complied with, whether specified herein or not. The granting of this permit does not presume to give authority to violate or cancel the provisions of any other state or local laws regulating construction or the performance of work. I am authorized to sign and obtain this development permit and agree to the conditions attached to this permit. Signature: 'v /°v ' Date: 0-S O(o' I'-j Print Name: —� ��� N\ � 1 This permit shall become null and void if the work is not commenced within 180 days for the date of issuance, or if the work is suspended or abandoned for a period of 180 days from the last inspection. PERMIT CONDITIONS: 1: Work shall be installed in accordance with the approved construction documents, and any changes made during construction that are not in accordance with the approved construction documents shall be resubmitted for approval. 2: All permits, inspection record card and approved construction documents shall be kept at the site of work and shall be open to inspection by the Building Inspector until final inspection approval is granted. 3: Readily accessible access to roof mounted equipment is required. 4: All construction shall be done in conformance with the Washington State Building Code and the Washington State Energy Code. 5: Remove all demolition rubble and loose miscellaneous material from lot or parcel of ground, properly cap the sanitary sewer connections, and properly fill or otherwise protect all basements, cellars, septic tanks, wells, and other excavations. Final inspection approval will be determined by the building inspector based on satisfactory completion of this requirement. 6: All plumbing and gas piping work shall be inspected and approved under a separate permit issued by the City of Tukwila Building Department (206-431-3670). 7: All electrical work shall be inspected and approved under a separate permit issued by the City of Tukwila Permit Center. 8: VALIDITY OF PERMIT: The issuance or granting of a permit shall not be construed to be a permit for, or an approval of, any violation of any of the provisions of the building code or of any other ordinances of the City of Tukwila. Permits presuming to give authority to violate or cancel the provisions of the code or other ordinances of the City of Tukwila shall not be valid. The issuance of a permit based on construction documents and other data shall not prevent the Building Official from requiring the correction of errors in the construction documents and other data. 9: ***MECHANICAL PERMIT CONDITIONS*** 10: All mechanical work shall be inspected and approved under a separate permit issued by the City of Tukwila Permit Center (206/431-3670). 11: Manufacturers installation instructions shall be available on the job site at the time of inspection. 20: The attached set of building plans have been reviewed by the Fire Prevention Bureau and are acceptable with the following concerns: 15: H.V.A.C. units rated at greater than 2,000 cfm require auto -shutdown devices. These devices shall be separately zoned in the alarm panel and local U.L. central station supervision is required. (City Ordinance #2437) 16: H.V.A.C. systems supplying air in excess of 2,000 cubic feet per minute to enclosed spaces within buildings shall be equipped with an automatic shutoff. Automatic shutoff shall be accomplished by interrupting the power source of the air -moving equipment upon detection of smoke in the main return -air duct served by such equipment. Smoke detectors shall be labeled by an approved agency for air -duct installation and shall be installed in accordance with the manufacturer's installation instructions. (IMC 606.1, 606.2.1) 13: Remote indicator lights are required on all above ceiling smoke detectors. (City Ordinance #2437) 17: Duct smoke detectors shall be capable of being reset from a single point near the alarm panel. (City Ordinance #2437) 18: Duct detectors shall send a supervisory signal only upon activation. (City Ordinance #2437) 14: All new fire alarm systems or modifications to existing systems shall have the written approval of The Tukwila Fire Prevention Bureau. No work shall commence until a fire department permit has been obtained. (City Ordinance #2437) (IFC 901.2) 19: An electrical permit from the City of Tukwila Building Department Permit Center (206-431-3670) is required for this project. 12: Contact The Tukwila Fire Prevention Bureau to witness all required inspections and tests. (City Ordinances #2436 and #2437) 21: Any overlooked hazardous condition and/or violation of the adopted Fire or Building Codes does not imply approval of such condition or violation. 22: These plans were reviewed by Inspector 511. If you have any questions, please call Tukwila Fire Prevention Bureau at (206)575-4407. PERMIT INSPECTIONS REQUIRED Permit Inspection Line: (206) 438-9350 1400 FIRE FINAL 0703 MECH EQUIP EFF 1800 MECHANICAL FINAL 0609 PIPE/DUCT INSULATION 0705 REFRIGERATION EQUIP 0701 ROUGH -IN MECHANICAL 0704 SMOKE CONTROL TEST 0702 SMOKE DETECTOR TEST CITY OF TUKWI_ Community Development Department Permit Center 6300 Southcenter Blvd., Suite 100 Tukwila, WA 98188 http://www.TukwilaWA.gov Mechanical Permit No. 1 L-1-0() Project No. Date Application Accepted: ���_3 I Date Application Expires: (For office use only) MECHANICAL PERMIT APPLICATION Applications and plans must be complete in order to be accepted for plan review. Applications will not be accepted through the mail or by fax. **please print** SITE LOCATION King Co Assessor's Tax No.: 162-304-9001 Site Address: 12844 Military Rd S Suite Number: Floor: 3W Tenant Name: Cascade Behavioral Hospital PROPERTY OWNER Name: Acadia Healthcare Address: 830 Crescent Drive, Suite 610 City: Franklin State: TN Zip: 37067 CONTACT PERSON — person receiving all project communication Name: Dan Jardine Address: 2025 First Avenue, Suite 300 City: Seattle State: WA Zip: 98121 Phone: (206) 441-4522 Fax: (206) 441-7917 Email: djardine@nacarchitecture.com New Tenant: ❑ Yes ..No MECHANICAL CONTRACTOR INFORMATION Company Name: Address: City: State: Zip: Phone: Fax: Contr Reg No.: Exp Date: Tukwila Business License No.: Valuation of project (contractor's bid price): $ Describe the scope of work in detail: Improvements to existing air distribution system including new AHU and ductwork. 475,000 Use: Residential: New ❑ Replacement ❑ Commercial: New ❑ Replacement Fuel Type: Electric ❑ Gas m Other: H:\Applications\Forms-Applications On Line\2011 Applications\Mechanical Permit Application Revised 8-9-11.docx Revised. August 2011 bh Page 1 of 2 Indicate type of mechanical work being installed and the quantity below: Unit Type Qty Furnace <100k btu Furnace > 100k btu Floor furnace Suspended/wall/floor mounted heater Appliance vent Repair or addition to heat/refrig/cooling system Air handling unit <10,000 cfm 1 Unit Type Qty Air handling unit >10,000 cfm Evaporator cooler Ventilation fan connected to single duct 1 Ventilation system Hood and duct Incinerator — domestic Incinerator — comm/industrial Unit Type Qty Fire damper 7 Diffuser 90 Thermostat 24 Wood/gas stove Emergency generator Other mechanical equipment Boiler/Compressor Qty 0-3 hp/100,000 btu 3-15 hp/500,000 btu 15-30 hp/1,000,000 btu 30-50 hp/1,750,000 btu 50+ hp/1,750,000 btu PERMIT APPLICATION NOTES - Value of construction — in all cases, a value of construction amount should be entered by the applicant. This figure will be reviewed and is subject to possible revision by the permit center to comply with current fee schedules. Expiration of plan review — applications for which no permit is issued within 180 days following the date of application shall expire by limitation. The building official may grant one extension of time for additional periods not to exceed 90 days each. The extension shall be requested in writing and justifiable cause demonstrated. Section 105.3.2 International Building Code (current edition). I HEREBY CERTIFY THAT I HAVE READ AND EXAMINED THIS APPLICATION AND KNOW THE SAME TO BE TRUE UNDER PENALTY OF PERJURY BY THE LAWS OF THE STATE OF WASHINGTON, AND I AM AUTHORIZED TO APPLY FOR THIS PERMIT. BUILDING OWNER OR AUTHORIZED AGENT: Signature: Date: Print Name: Daniel C. Jardine Day Telephone: (206) 441-4522 Mailing Address: 2025 First Avenue, Suite 300 Seattle WA 98121 City State Zip H:\Applications\Forms-Applications On Line\2011 Applications\Mechanical Permit Application Revised 8-9-11.docx Revised: August 2011 bh Page 2 of 2 r,"-- v+1 LI ,.., DESCRIPTIONS PermitTRAK Cash Register Receipt City of Tukwila ACCOUNT QUANTITY PAID 1301 M14-0088 Address: 12844MILITARYRD S:2 1623049001 MECHANICAL $65.00 ADDITIONAL PLAN REVIEW R000.345.830.00.00 1.00 $65.00 PG14-0059 Address: 12844 MILITARY RD S 2 Apn: 1623049001 65. PLUMBING $65.00 ADDITIONAL PLAN REVIEW TOTAL FEES PAID BY RECEIPT: R2901 R000.345.830.00.00 1.00 $65.00 $130.00 Date Paid: Wednesday, August 20, 2014 Paid By: MARK TOBIN Pay Method: CREDIT CARD 665966 Printed: Wednesday, August 20, 2014 10:07 AM 1 of 1 CRWSYSTEMS Cash Register Receipt City of Tukwila DESCRIPTIONS I ACCOUNT I QUANTITY PermitTRAK PAID $4,385.04 M14-0088 Address: 12844 MILITARY RD S 2 Apn: 1623049001 $4,217.54 MECHANICAL $4,016.70 PERMIT ISSUANCE BASE FEE R000.322.100.00.00 $32.50 PERMIT FEE R000.322.100.00.00 $3,984.20 TECHNOLOGY FEE $200.84 TECHNOLOGY FEE R000.322.900.04.00 $200.84 PG14-0059 Address: 12844 MILITARY RD S 2 Apn: 1623049001 $167.50 PLUMBING $167.50 PERMIT ISSUANCE BASE FEE R000.322.100.00.00 $32.50 PERMIT FEE TOTAL FEES PAID BY RECEIPT: R2038 R000.322.100.00.00 $135.00 $4,385.04 Date Paid: Tuesday, May 06, 2014 Paid By: SCOTT T MILLER Pay Method: CREDIT CARD 04089D Printed: Tuesday, May 06, 2014 1:21 PM 1 of 1 SYSTEMS Cash Register Receipt City of Tukwila DESCRIPTIONS ACCOUNT I QUANTITY PAID PermitTRAK $1,004.18 M14-0088 Address: 12844 MILITARY RD S 2 Apn: 1623049001 $1,004.18 MECHANICAL $1,004.18 PLAN CHECK FEE TOTAL FEES PAID BY RECEIPT: R1886 R000.322.102.00.00 $1,004.18 $1,004.18 Date Paid: Wednesday, April 23, 2014 Paid By: DANIELJARDINE Pay Method: CREDIT CARD 045373 Printed: Wednesday, April 23, 2014 8:43 AM 1 of 1 SYSTEMS INSPECTION RECORD Retain a copy with permit INSPECTION NO. PERMIT NO. CITY OF TUKWILA BUILDING DIVISION 6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431-3670 Permit Inspection Request Line (206) 431-2451 Project: �; , ji r Type of Inspection: Address:. / Ga'( ' 4"1 . 1 , r .1 Date Called: iy%'/.' r-. Special Instructions: ✓,- / Date Wanted:. ; _ - ice'.. - a.m. . p.m. Requester: Phone No: ❑ Approved per applicable codes. ElCorrections required prior to approval. COMMENTS: j� a (I ..l-4 , ._ 0 c. F W,i.f t 1 f ) `°, 1 s Inspector: !`:�� Date: r r n REINSPECTION FEE REQUIRED. Prior to next inspection. fee must be paid at 6300 Southcenter Blvd., Suite 100. Call to schedule reinspection. Mff-;t INSPECTION NO. PERMIT NO. oil CITY OF TUKWILA BUILDING DIVISION 6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431-3670 Permit Inspection Request Line (206) 431-2451 INSPECTION RECORD Retain a copy with permit Project: QQ A C /. mot ° Kit° h f't',.1 i %ft(.. Type of Inspection: s-- — S f p`^ A �' .-- S�./' 1 .u/\r t 7.1( A , 1 , t A-ry ett._uc--- Ake-dv � Special Instructions: /7 Date Wanted: za.m= Requester: Phone No: 2 Approved per applicable codes. Corrections required prior to approval. COMMENTS: >> Insp>:ctor: Date: !- - /4 REINSPECTION FEE REQUIRED. Prior to next inspection, fee must be paid at 6300 Southcenter Blvd.. Suite 100. Cali to schedule reinspection. INSP CTION NO. INSPECTION RECORD Retain a copy with permit AAA -03M PERMIT NO. CITY OF TUKWILA BUILDING DIVISION 6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431-3670 Permit Inspection Request Line (206) 431-2451 Project: 1 A-s c 1-c1 e. r �' lAil k./; or M Type of Insp ction: __NkC.( ... Irt . A 1.i Address: M Z'44 � 1 `fit Date Called: Special Instructions: Date Wanted: (a. m l 0 2(} -fit it P.m. Requester: Phone No: EiApproved per applicable codes. Corrections required prior to approval. COMMENTS: ( 1 ) f of /3 isA-! 1A./I 6 /`Y_--f1 Jr r v f ,72) /v( e '/ ,_a 'i/�' ore .,S `t✓ t b341.'L On As( e , -c ,(4f'--1/ / .4".. / Insp� ctor: Date a 1 1 REINSPECTION FEE REQUIRED. Prior to next inspection, fee must be paid at 6300 Southcenter Blvd., Suite 100. Call to schedule reinspection. INSPECTION RECORD Retain a copy with permit INSPECTION NO. PERMIT NO. CITY OF TUKWILA BUILDING DIVISION 6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431-3670 Permit Inspection Request Line (206) 431-2451 Project: (_ASCAA( 3e 1J=_''%,4L� Type of Inspection: J'l ' aLAJ/1 Addres.:/tiv _mit Date Called: Special Instructions: ( ( Date Wanted: �� _ l mf° P.m. Requester: Phone No: ElApproved per applicable codes. D Corrections required prior to approval. COMMENTS: F 1- -(1 .-A An, ;;) - &J < ! '.,) C 4 ( )nit .. Vt > iJ , T. 1.,i A c,orre,r, L),A ''', ' Skttk- -0k &))\-, - 1 \- IS T -WA- Cr773 Inspector: Date:: r 2„4 4 REINSPECTION FEE REQUIRED. Prior to next inspection, fee must be paid at 6300 Southcenter Blvd., Suite 100. Call to schedule reinspection. 44'4 INSPECTION RECORD Retain a copy with permit INSPECTION NO. PERMIT NO. CITY OF TUKWILA BUILDING DIVISION cm 6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431-3670 Permit Inspection Request Line (206) 431-2451 Project: / , f'A I �i�_ i P%Au. )/At�..._ Type of Inspection: _ 1�`. P. DJ6e14 ILAS , Address: jj�( 1 1 ! • k44 A 1 : 1 : i A `4 Date/Called: �/}C�l (fin p %� /� fi s 1. �[.�.- Dr° t e 'r %4 J •` L7 Special Instructions: ( Date Wanted: r .a m iQ_ r �. p.m. Requester: Phone fl 4 2_ () •- l /) — lz Approved per applicable codes. Corrections required prior to approval. COMMENTS: x i A-- 1 ,16 ,1,_ ( -,./i—r,c1:-7 I 1 ) Inspector: Date: !D n REINSPECTION'FEE REQUIRED. Prior to next inspection, fee must be paid at 6300 Southcenter Blvd., Suite 100. Call to schedule reinspection. INSPECTION RECORD Retain a copy with permit M—60 , INSPECTION NO. PE MIT NO. CITY OF TUKWILA BUILDING DIVISION Cr-/" 6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431-3670 Permit Inspection Request Line (206) 431-2451 Project: p _ _ Type of Inspection: _ Ai Address: 1 1:7-4.4 At / 'i7 y Date Called: Special Instructions: / Date Wanted: ( am p.m. � 0 -GI - Requester: Phone No: Approved per applicable codes. El Corrections required prior to approval. COMMENTS: ii ,0 7 l.) /t D 0 l" i J,0 t 4 i 1)130-,)K VILIGZfd71-c_ Pi,o 1 K ---s-e s �' 7 4.1 t-. ) 6 ii< TR) IA , s ul) 6 ik , Inspector: • -pY Date: 0 REINSPECTION FEE REQUIRED.. Prior to next inspection, fee must be paid at�6300 Southcenter Blvd., Suite 100. Call to schedule reinspection. INSPECTION RECORD Retain a copy with permit INSPECTION NO. PERMIT NO. CITY OF TUKWILA BUILDING DIVISION 6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431-3670 Permit Inspection Request Line (206) 431-2451 Project: A-�l..,4' A 1 4-J,.i/4LV_.. Type o(rinspection �. % f't a v 6 i j1—A _ Address: * .i Z• 41 M i, T4 R j Date Called: Special Instructions: ( Date Wanted: I c - �f - / 4 atnr p.m. Requester: Phone No: ❑Approved per applicable codes. O Corrections required prior to approval. COMMENTS: /T J 14 - ll 4L }. ` op[ /`. i cif____ inspector: Dater 0 REINSPECTION FEE REQUIRED. Prior to next inspection, fee must be paid at 6300 Southcenter Blvd.. Suite 100. Call to schedule reinspection. Sri INSPECTION NO. INSPECTION RECORD Retain a copy with permit M / 4 - ockTK PERMIT NO. CITY OF TUKWILA BUILDING DIVISION 6300 5outhcenter Blvd., #100, Tukwila. WA 98188 (206) 431-3670 Permit Inspection Request Line (206) 431-2451 Project/:y r / A ,.�J� t2 t,• ection:: Type of L)L)(tf �13iuO/! T Address:///� / 4 E a / "t! 1 dI, A/ Date Called: / i cef Special Instructions: / Date Wanted: / 0p.m. / ... /� ,a,mf Requester: Phone No: Approved per applicable codes. I:J Corrections required prior to approval. COMMENTS: . —WA- 0 g. 6e f / ' A-1 f Jo K. e I/&C)/ J( ) I '1 , Ppi . or 1-,/ s 01:__() ' %o ef...ff AIs {� A-, r �n 1--- -AkJ f ,/ RI 1l )4.1 A Inspe I Date: to REINSPECTION FEE REQUIRED. Prior to next inspection. fee must be paid at 6300 Southcenter Blvd.. Suite 100. Call to schedule reinspection. lo INSPECTION NUMBER INSPECTION RECORD Retain a copy with permit /c-tr j_)S/ Mitt tl — c) PERMIT NUMBERS CITY OF TUKWILA FIRE DEPARTMENT 444 Andover Park East, Tukwila, Wa. 98188 206-575-4407 Project: ( e_ e_k of ote.-- Type of Inspection: 3 if+i / 4'L--- 14 , Address: /= d-, df Suite #: y�,�, , 4- Contact Person: Special Instructions: Phone No.: Je Approved per applicable codes. Corrections required prior to approval. COMMENTS: / irci goc) 6D i moo do & _. HVINTIVO SP} , on L. - OK tq re I) G h.-t 0.) u ..- %///OK' --1----;°r — 1Ae..1 eGle ',-1131.-€.,_ ijeAlaR $D A A 5I ri tY L ---re, -1 - C Needs Shift Inspection: Sprinklers: Fire Alarm: Hood & Duct: Monitor: Pre -Fire: Permits: Occupancy Type: Inspector: ,J1 f r a Date: / /c9' / V Hrs.: cl $100.00 REINSPECTION FEE REQUIRED. You will receive an invoice from the City of Tukwila Finance Department. Call to schedule a reinspection. Billing Address Attn: Address: Company Name: City: State: Zip: Word/Inspection Record Form.Doc 6/11/10 T.F.D. Form F.P. 113 AIRTEST Co., Inc, NE BB Preliminary Test and Balance Report FIRM: Airtest Co Inc PO Box 86 Issaquah, WA 98027 PHONE: 425-313-0172 FAX: 425-313-5735 PROJECT: Cascade Behavioral Hospital 12844 Military Rd Tukwila, WA DATE: 10/31/2014 PROJECT #: 14-2039-1 CONTACT: Scott Davies NOTES: Airtest Co Inc VV1 RECEIVED CITY OF TUKWILA NOV 10 2014 PERMIT CENTER Preliminary Test and Balance Report 1 of 15 AIRTEST Co., Inc. NEj BB Air Handling Unit PROJECT: Cascade Behavioral Hospital LOCATION: Tukwila, WA PROJECT #: 14-2039-1 DATE: 10/31/2014 CONTACT: Scott Davies SYSTEM/UNIT: AHU-07 AREA: 3rd Floor Supply Air Unit Data Location Roof Service Cascade Behavioral 3rd Flo Unit Manufacturer Haakon Unit Model Number PENPAK Unit Serial Number 14-8497-542-C AHU-07 / Return Fan Fan Type / Class BC AHU-07 / Supply Fan Fan Type / Class BC Test Data Design Extemal SP 2.00 in. wc Actual Ext. SP Suction -.19 in. wc Actual Ext. SP Discharge 2.73 in. we Actual Total Ext SP 2.92 in. we Pre -Filter SP In -.20 in. wc Pre -Filter SP Out -.58 in. wc Pre -Filter DP .38 in. wc Cool. Coil SP In -.58 in. wc Cool. Coil SP Out -1.05 in. wc Cooling Coil DP .47 in. wc AHU-07 / Return Fan Fan RPM Design 1703 RPM Fan RPM Actual 1818 RPM TSP Design 1.00 in. wc. A. Tot. Inlet SP -1.59 in. wc. A. Tot. Discharge SP .57 in. wc. TSP Actual 2.16 in. wc. AHU-07 / Supplv Fan Fan RPM Design 1670 RPM Fan RPM Actual 1495 RPM TSP Design 5.00 in. wc. A. Tot. Inlet SP -1.05 in. wC. A. Tot. Discharge SP 2.70 in. wc. TSP Actual 3.75 in. wc. Tested By: Scott Davies Test Date: October 29, 2014 Motor Data AHU-07 / Return Fan Motor Manufacturer Baldor Motor HP 3 HP Motor RPM 1760 RPM Motor Frame 182T Motor Rated Volts 208 Volts Motor Phase 3 Motor Hertz 60 Hz Motor FL Amps 9 Amps Motor Service Factor 1.15 VFD Model ABB AHU-07 / Supply Fan Motor Manufacturer Baldor Motor HP 10 HP Motor RPM 1770 RPM Motor Frame 215T Motor Rated Volts 208 Volts Motor Phase 3 Motor Hertz 60 Hz Motor FL Amps 25.4 Amps Motor Service Factor 1.15 VFD Model ABB Sheave Data AHU-07 / Return Fan Drive Type Direct Drive AHU-07 / Supply Fan Drive Type Direct Drive Air Test Data Total Supply CFM Des. 7800 CFM Tot. GRD CFM Des. 6440 CFM Tot GRD CFM Act. 6450 CFM RA CFM Design 4200 CFM OA CFM Design 2240 CFM Duct SP Setpoint 1.50 in. we Filter Data AHU-07 / SF Pre Filters Fitter Manufacturer FARR Fitter Type Pleated MERV Rating (6) Merv8 / (6)No Mery Fitter Quantity 4/4 / 2 / 2 Filter Size 24x24x4 / 24x24x4 / 12x24x Airiest Co Inc Preliminary Test and Balance Report 2 of 15 AIRTEST Co., Inc, gitt Air Handling Unit PROJECT: Cascade Behavioral Hospital LOCATION: Tukwila, WA PROJECT #: 14-2039-1 DATE: 10/31/2014 CONTACT: Scott Davies SYSTEM/UNIT: AHU-07 (Cont.) AREA: 3rd Floor Supply Air Electrical Test Data AHU-07 / Retum Fan Final Operating Hz Motor Volts 1 Motor Volts 2 Motor Volts 3 Motor Amps 1 Motor Amps 2 Motor Amps 3 AHU-07 / Supply Fan Final Operating Hz Motor Volts 1 Motor Volts 2 Motor Volts 3 Motor Amps 1 Motor Amps 2 Motor Amps 3 62 Hz 197 Volts 197 Volts 197 Volts 8.8 Amps 8.8 Amps 8.9 Amps 50.5 Hz 175 Volts 175 Volts 175 Volts 18.9 Amps 18.9 Amps 18.9 Amps AHU-07 Retum Inlet Summary Tested By: Scott Davies Test Date: October 29, 2014 System / Unit Area Served Outlet Type Size LxW / D Design CFM Prelim Reading Final Reading % Final Retum-01 Patient Rm 342 RG 8 130 250 140 108 Retum-02 Patient Rm 338 RG 8 130 305 125 96 Retum-03 Patient Rm 341 RG 8 160 220 150 94 Retum-04 Patient Rm 337 RG 8 140 20 130 93 Retum-05 Patient Rm 335 RG 8 140 20 150 107 Retum-06 Patient Rm 331 RG 8 140 190 145 104 Retum-07 Patient Rm 329 RG 8 130 155 125 96 Retum-08 Storage 322 RG 8 100 80 110 110 Retum-09 Day Rm 313 RG 12 520 450 500 96 Retum-10 Quit 320 RG 8 180 155 170 94 Retum-11 Patient Rm 309 RG 8 140 115 145 104 Retum-12 Patient Rm 307 RG 8 140 120 140 100 Retum-13 Patient Rm 303 RG 8 150 90 140 93 Retum-14 Patient Rm 302 RG 8 130 50 135 104 Return-15 Patient Rm 306 RG 8 130 60 130 100 Return-16 Patient Rm 308 RG 8 130 55 130 100 Retum-17 Nurse 315 RG 12 460 100 420 91 Retum-18 Patient Rm 336 RG 8 130 200 135 104 Retum-19 Patient Rm 332 RG 8 130 220 120 92 Retum-20 Corridor C302 RG 12 640 475 645 101 Retum-21 Elevator Vest C300 RG 12 640 525 640 100 Totals : - - 4,590 3,855 4,525 99 % Airtest Co Inc Preliminary Test and Balance Report 3 of 15 AIRTEST Co., Inc Air Handling Unit PROJECT: Cascade Behavioral Hospital LOCATION: Tukwila, WA PROJECT #: 14-2039-1 DATE: 10/31/2014 CONTACT: Scott Davies SYSTEM/UNIT: AHU-07 (Cont.) AREA: 3rd Floor Supply Air * Notes Tested By: Scott Davies Test Date: October 29, 2014 AHU-07 29-Oct-14 Scott Davies ESP taken in 100% OSA mode. Measurements taken from the Mixing Chamber and the Discharge Chamber of the SF. SYSTEM/UNIT: AHU-07 / TU-3-01 AREA: Patient Rm 302 Unit Data Manufacturer Controls System VAV Type Box Inlet Size K Factor Titus Delta Shut -Off 5 RD 450 Test Data Heat Works Yes * Notes Tested By: Scott Davies Test Date: October 28, 2014 Air Test Data Design Primary Max CFM 180 CFM Actual Max Primary CFM 185 CFM Design Primary Min. CFM 180 CFM Actual Primary Min. CFM 185 CFM SYSTEM/UNIT: AHU-07 / TU-3-02 AREA: Patient Rm 306 Unit Data Manufacturer Controls System VAV Type Box Inlet Size K Factor Titus Delta Shut -Off 5 RD 675 Test Data Heat Works Yes AHU-07 / TU-3-02 Supply Outlet Summary Tested By: Scott Davies Test Date: October 29, 2014 Air Test Data Design Primary Max CFM 330 CFM Actual Max Primary CFM 315 CFM Design Primary Min. CFM 330 CFM Actual Primary Min. CFM 315 CFM System / Unit Area Served Outlet Type Size LxW / D Design CFM Prelim Reading Final Reading % Final Outlet-01 Patient Rm 306 CD 8 RD 180 120 170 94 Outlet-02 Corridor C302 CD 8 RD 150 120 145 97 Totals : - - 330 240 315 95 % * Notes Airtest Co Inc Preliminary Test and Balance Report 4of15 AIRTEST Co., Inc. Air Handling Unit PROJECT: Cascade Behavioral Hospital LOCATION: Tukwila, WA PROJECT #: 14-2039-1 DATE: 10/31/2014 CONTACT: Scott Davies SYSTEM/UNIT: AHU-07 / TU-3-03 AREA: Seclusion 308 Unit Data Manufacturer Controls System VAV Type Box Inlet Size K Factor Titus Delta Shut -Off 5 RD 425 Test Data Heat Works Yes * Notes Tested By: Scott Davies Test Date: October 28, 2014 Air Test Data Design Primary Max CFM 180 CFM Actual Max Primary CFM 185 CFM Design Primary Min. CFM 180 CFM Actual Primary Min. CFM 185 CFM SYSTEM/UNIT: AHU-07 / TU-3-04 AREA: Seclusion 312 Unit Data Manufacturer Controls System VAV Type Box Inlet Size K Factor Titus Delta Shut -Off 6 RD 675 AHU-07 / TU-3-04 Supply Outlet Summary Tested By: Scott Davies Test Date: October 28, 2014 Air Test Data Design Primary Max CFM 430 CFM Actual Max Primary CFM 445 CFM Design Primary Min. CFM 430 CFM Actual Primary Min. CFM 445 CFM System / Unit Area Served Outlet Type Size LxW / D Design CFM Prelim Reading Final Reading % Final Outlet-01 Quiet 312 CD 8 RD 210 160 210 100 Outlet-02 Corridor C302 CD 8 RD 200 220 190 95 Outlet-03 Vestibule CD 6 RD 50 85 55 110 Totals : - - 460 465 455 99 % * Notes Airiest Co Inc Preliminary Test and Balance Report 5 of 15 AIRTEST Co., Inc. Air Handling Unit PROJECT: Cascade Behavioral Hospital LOCATION: Tukwila, WA PROJECT #: 14-2039-1 DATE: 10/31/2014 CONTACT: Scott Davies SYSTEM/UNIT: AHU-07 / TU-3-05 AREA: Nurse 315 Unit Data Manufacturer Controls System VAV Type Box Inlet Size K Factor Titus Delta Shut -Off 6 RD 680 Test Data Heat Works Yes AHU-07/ TU-3-05 Supply Outlet Summary Tested By: Scott Davies • Test Date: October 29, 2014 Air Test Data Design Primary Max CFM 450 CFM Actual Max Primary CFM 445 CFM Design Primary Min. CFM 450 CFM Actual Primary Min. CFM 445 CFM System / Unit Area Served Outlet Type Size LxW / D Design CFM Prelim Reading Final Reading % Final Outlet-01 MEDS 316 CD 6 RD 50 60 55 110 Outlet-02 Nurse 315 CD 8 RD 155 170 155 100 Outlet-03 Elevator Vest C300 CD 8 RD 155 175 150 97 Outlet-04 Corridor C301 CD 6 RD 90 70 85 94 Totals : - - 450 475 445 99 % * Notes Airtest Co Inc Preliminary Test and Balance Report 6 of 15 AIRTEST Co., Inc. Air Handling Unit PROJECT: Cascade Behavioral Hospital LOCATION: Tukwila, WA PROJECT #: 14-2039-1 DATE: 10/31/2014 CONTACT: Scott Davies SYSTEM/UNIT: AHU-07 / TU-3-06 AREA: Clean 323 Unit Data Manufacturer Controls System VAV Type Box Inlet Size K Factor Titus Delta Shut -Off 6 RD 450 Test Data Heat Works Yes AHU-07 / TU-3-06 Supply Outlet Summary Tested By: Scott Davies Test Date: October 29, 2014 Air Test Data Design Primary Max CFM 380 CFM Actual Max Primary CFM 355 CFM Design Primary Min. CFM 380 CFM Actual Primary Min. CFM 355 CFM System / Unit Area Served Outlet Type Size LxW / D Design CFM Prelim Reading Final Reading % Final Outlet-01 Clean 323 CD 6 RD 80 45 75 94 Outlet-02 Soiled 325 CD 6 RD 70 50 70 100 Outlet-03 Corridor C301 CD 8 RD 130 80 120 92 Outlet-04 Storage 322 CD 6 RD 100 90 90 90 Totals : - - 380 265 355 93 % * Notes SYSTEM/UNIT: AHU-07 / TU-3-07 AREA: Patient Rm 332 Unit Data Manufacturer Controls System VAV Type Box Inlet Size K Factor Titus Delta Shut -Off 5 RD 685 Test Data Heat Works Yes AHU-07 / TU-3-07 Supply Outlet Summary Tested By: Scott Davies Test Date: October 29, 2014 Air Test Data Design Primary Max CFM 320 CFM Actual Max Primary CFM 340 CFM Design Primary Min. CFM 320 CFM Actual Primary Min. CFM 340 CFM System / Unit Area Served Outlet Type Size LxW / D Design CFM Prelim Reading Final Reading % Final Outlet-01 Corridor C302 CD 8 RD 140 205 145 104 Outlet-02 Patient Rm 332 CD 8 RD 180 190 195 108 Totals : - - 320 395 340 106 % * Notes Airtest Co Inc Preliminary Test and Balance Report 7 of 15 AIRTEST Co., Inc. Air Handling Unit PROJECT: Cascade Behavioral Hospital LOCATION: Tukwila, WA PROJECT #: 14-2039-1 DATE: 10/31 /2014 CONTACT: Scott Davies NE EBB SYSTEM/UNIT: AHU-07 / TU-3-08 AREA: Patient Rm 336 Unit Data Manufacturer Controls System VAV Type Box Inlet Size K Factor Titus Delta Shut -Off 5 RD 450 Test Data Heat Works Yes * Notes Tested By: Scott Davies Test Date: October 28, 2014 Air Test Data Design Primary Max CFM 180 CFM Actual Max Primary CFM 170 CFM Design Primary Min. CFM 180 CFM Actual Primary Min. CFM 170 CFM SYSTEM/UNIT: AHU-07 / TU-3-09 AREA: Patient Rm 338 Unit Data Manufacturer Controls System VAV Type Box Inlet Size K Factor Titus Delta Shut -Off 5 RD 475 Test Data Heat Works Yes * Notes Tested By: Scott Davies Test Date: October 28, 2014 Air Test Data Design Primary Max CFM 180 CFM Actual Max Primary CFM 170 CFM Design Primary Min. CFM 180 CFM Actual Primary Min. CFM 170 CFM Airtest Co inc Preliminary Test and Balance Report 8 of 15 AIRTEST Co., Inc. Air Handling Unit PROJECT: Cascade Behavioral Hospital LOCATION: Tukwila, WA PROJECT #: 14-2039-1 DATE: 10/31/2014 CONTACT: Scott Davies SYSTEM/UNIT: AHU-07 / TU-3-10 AREA: Patient Rm 342 Unit Data Manufacturer Controls System VAV Type Box Inlet Size K Factor Titus Delta Shut -Off 5 RD 420 Test Data Heat Works Yes AHU-07 / TU-3-10 Supply Outlet Summary Tested By: Scott Davies Test Date: October 28, 2014 Air Test Data Design Primary Max CFM 270 CFM Actual Max Primary CFM 285 CFM Design Primary Min. CFM 270 CFM Actual Primary Min. CFM 285 CFM System / Unit Area Served Outlet Type Size LxW / D Design CFM Prelim Reading Final Reading % Final Outlet-01 Patient Rm 342 CD 8 RD 180 145 190 106 Outlet-02 Corridor C302 CD 6 RD 90 80 95 106 Totals : - - 270 225 285 106 % * Notes SYSTEM/UNIT: AHU-07 / TU-3-11 AREA: Patient Rm 341 Unit Data Manufacturer Controls System VAV Type Box Inlet Size K Factor Titus Delta Shut -Off 5 RD 425 * Notes Tested By: Scott Davies Test Date: October 28, 2014 Air Test Data Design Primary Max CFM 210 CFM Actual Max Primary CFM 220 CFM Design Primary Min. CFM 210 CFM Actual Primary Min. CFM 220 CFM Airiest Co Inc Preliminary Test and Balance Report 9 of 15 AIRTE T Co., Inc. Air Handling Unit PROJECT: Cascade Behavioral Hospital LOCATION: Tukwila, WA PROJECT #: 14-2039-1 DATE: 10/31/2014 CONTACT: Scott Davies SYSTEM/UNIT: AHU-07 / TU-3-12 AREA: Patient Rm 337 Unit Data Manufacturer Controls System VAV Type Box Inlet Size K Factor Titus Delta Shut -Off 5 RD 450 Test Data Heat Works Yes * Notes Tested By: Scott Davies Test Date: October 28, 2014 Air Test Data Design Primary Max CFM 190 CFM Actual Max Primary CFM 195 CFM Design Primary Min. CFM 190 CFM Actual Primary Min. CFM 195 CFM SYSTEM/UNIT: AHU-07 / TU-3-13 AREA: Patient Rm 335 Unit Data Manufacturer Controls System VAV Type Box Inlet Size K Factor Titus Delta Shut -Off 5 RD 410 Test Data Heat Works Yes * Notes Tested By: Scott Davies Test Date: October 28, 2014 Air Test Data Design Primary Max CFM 190 CFM Actual Max Primary CFM 185 CFM Design Primary Min. CFM 190 CFM Actual Primary Min. CFM 185 CFM SYSTEM/UNIT: AHU-07 / TU-3-14 AREA: Patient Rm 331 Unit Data Manufacturer Controls System VAV Type Box Inlet Size K Factor Titus Delta Shut -Off 5 RD 435 Test Data Heat Works Yes * Notes Tested By: Scott Davies Test Date: October 29, 2014 Air Test Data Design Primary Max CFM 190 CFM Actual Max Primary CFM 195 CFM Design Primary Min. CFM 190 CFM Actual Primary Min. CFM 195 CFM Airtest Co Inc Preliminary Test and Balance Report 10 of 15 AIRTEST Co., Inc. Air Handling Unit PROJECT: Cascade Behavioral Hospital LOCATION: Tukwila, WA PROJECT #: 14-2039-1 DATE: 10/31/2014 CONTACT: Scott Davies SYSTEM/UNIT: AHU-07 / TU-3-15 AREA: Patient Rm 329 Unit Data Manufacturer Controls System VAV Type Box Inlet Size K Factor Titus Delta Shut -Off 5 RD 390 Test Data Heat Works Yes * Notes Tested By: Scott Davies Test Date: October 28, 2014 Air Test Data Design Primary Max CFM 180 CFM Actual Max Primary CFM 175 CFM Design Primary Min. CFM 180 CFM Actual Primary Min. CFM 175 CFM SYSTEM/UNIT: AHU-07 / TU-3-16 AREA: Day Rm 313 Unit Data Manufacturer Controls System VAV Type Box Inlet Size K Factor Titus Delta Shut -Off 7 RD 1075 Test Data Heat Works Yes AHU-07/ TU-3-16 Supply Outlet Summary Tested By: Scott Davies Test Date: October 29, 2014 Air Test Data Design Primary Max CFM 490 CFM Actual Max Primary CFM 510 CFM Design Primary Min. CFM 490 CFM Actual Primary Min. CFM 510 CFM System / Unit Area Served Outlet Type Size LxW / D Design CFM Prelim Reading Final Reading % Final Outlet-01 Day Rm 313 CD 8 RD 165 230 165 100 Outlet-02 Day Rm 313 CD 8 RD 165 245 180 109 Outlet-03 Day Rm 313 CD 8 RD 165 225 165 100 Totals : - - 495 700 510 103 % * Notes Airtest Co Inc Preliminary Test and Balance Report 11 of 15 AIRTEST Co., Inc. Air Handling Unit PROJECT: Cascade Behavioral Hospital LOCATION: Tukwila, WA PROJECT #: 14-2039-1 DATE: 10/31/2014 CONTACT: Scott Davies SYSTEM/UNIT: AHU-07 / TU-3-17 AREA: Patient Rm 309 Unit Data Manufacturer Controls System VAV Type Box Inlet Size K Factor Titus Delta Shut -Off 5 RD 490 Test Data Heat Works Yes * Notes Tested By: Scott Davies Test Date: October 28, 2014 Air Test Data Design Primary Max CFM 190 CFM Actual Max Primary CFM 190 CFM Design Primary Min. CFM 190 CFM Actual Primary Min. CFM 190 CFM SYSTEM/UNIT: AHU-07 / TU-3-18 AREA: Patient Rm 307 Unit Data Manufacturer Controls System VAV Type Box Inlet Size K Factor Titus Delta Shut -Off 5 RD 490 Test Data Heat Works Yes * Notes Tested By: Scott Davies Test Date: October 28, 2014 Air Test Data Design Primary Max CFM 190 CFM Actual Max Primary CFM 195 CFM Design Primary Min. CFM 190 CFM Actual Primary Min. CFM 195 CFM SYSTEM/UNIT: AHU-07 / TU-3-19 AREA: Patient Rm 303 Unit Data Manufacturer Controls System VAV Type Box Inlet Size K Factor Titus Delta Shut -Off 5 RD 465 Test Data Heat Works Yes * Notes Tested By: Scott Davies Test Date: October 28, 2014 Air Test Data Design Primary Max CFM 200 CFM Actual Max Primary CFM 200 CFM Design Primary Min. CFM 200 CFM Actual Primary Min. CFM 200 CFM Airtest Co Inc Preliminary Test and Balance Report 12of15 AIRTEST Co., Inc. Air Handling Unit PROJECT: Cascade Behavioral Hospital LOCATION: Tukwila, WA PROJECT #: 14-2039-1 DATE: 10/31/2014 CONTACT: Scott Davies SYSTEM/UNIT: AHU-07 / TU-3-20 AREA: Quiet Social 350 Unit Data Manufacturer Controls System VAV Type Box Inlet Size K Factor Titus Delta Shut -Off 12 RD 2000 Test Data Heat Works Yes AHU-07 / TU-3-20 Supply Outlet Summary Tested By: Scott Davies Test Date: October 29, 2014 Air Test Data Design Primary Max CFM 1280 CFM Actual Max Primary CFM 1260 CFM Design Primary Min. CFM 1280 CFM Actual Primary Min. CFM 1260 CFM System / Unit Area Served Outlet Type Size LxW / D Design CFM Prelim Reading Final Reading % Final Outlet-01 Quiet Social 350 CD 12 RD 640 440 630 98 Outlet-02 Quiet Social 350 CD 12 RD 640 660 630 98 Totals : - - 1,280 1,100 1,260 98 % * Notes SYSTEM/UNIT: AHU-07 / TU-3-21 (Not Used) AREA: * Notes Tested By: Scott Davies Test Date: October 23, 2014 SYSTEM/UNIT: AHU-07 / TU-3-22 (Not Used) AREA: * Notes Tested By: Scott Davies Test Date: October 23, 2014 SYSTEM/UNIT: AHU-07 / TU-3-23 (Not Used) AREA: * Notes Tested By: Scott Davies Test Date: October 23, 2014 Airtest Co Inc Preliminary Test and Balance Report 13 of 15 AIRTEST Co., Inc, Air Handling Unit PROJECT: Cascade Behavioral Hospital LOCATION: Tukwila, WA PROJECT #: 14-2039-1 DATE: 10/31/2014 CONTACT: Scott Davies SYSTEM/UNIT: AHU-07 / TU-3-24 AREA: Quiet 320 Unit Data Manufacturer Controls System VAV Type Box Inlet Size K Factor Titus Delta Shut -Off 5 RD 424 Test Data Heat Works Yes * Notes Tested By: Scott Davies Test Date: October 28, 2014 Air Test Data Design Primary Max CFM 230 CFM Actual Max Primary CFM 230 CFM Design Primary Min. CFM 230 CFM Actual Primary Min. CFM 230 CFM Airtest Co Inc Preliminary Test and Balance Report 14 of 15 AI I TE T Co., Inc. Autoflow Valve PROJECT: Cascade Behavioral Hospital LOCATION: Tukwila, WA PROJECT #: 14-2039-1 DATE: 10/31/2014 CONTACT: Scott Davies Existing CHW System / Unit Area Served MFG Model Design GPM Valve Rating DP Range (PSI) Actual DP (PSI) HCC-07 Chilled Water 42.90 Totals : - - 42.9 - - - Existing HW System / Unit Area Served MFG Model Design GPM Valve Rating DP Range (PSI) Actual DP (PSI) TU-3-01 Heating Water FlowCon E-JUSTI.Y. G 1.00 0.60 2.5 - 58 10.00 TU-3-02 Heating Water FlowCon E-JUSTI.Y. G 1.00 1.30 2.5 - 58 9.00 TU-3-03 Heating Water FlowCon E-JUST1.Y. G 0.80 1.00 2.5 - 58 8.00 TU-3-04 Heating Water FlowCon E-JUST1.Y. G 1.50 2.00 2.5 - 58 9.00 TU-3-05 Heating Water FlowCon E-JUST1.Y. G 1.50 2.00 2.5 - 58 9.00 TU-3-06 Heating Water FlowCon E-JUST1.Y. G 1.00 1.30 2.5 - 58 8.00 TU-3-07 Heating Water FlowCon E-JUST1.Y. G 1.00 1.30 2.5 - 58 8.00 TU-3-08 Heating Water FlowCon E-JUST1.Y. G 0.80 1.00 2.5 - 58 8.00 TU-3-09 Heating Water FlowCon E-JUST1.Y. G 0.80 1.00 2.5 - 58 8.00 TU-3-10 Heating Water FlowCon E-JUST1.Y. G 0.80 1.00 2.5 - 58 8.00 TU-3-11 Heating Water FlowCon E-JUST1.Y. G 0.80 1.00 2.5 - 58 8.00 TU-3-12 Heating Water FlowCon E-JUST1.Y. G 0.80 1.00 2.5 - 58 10.00 TU-3-13 Heating Water FlowCon E-JUST1.Y. G 0.80 2.5 - 58 11.00 TU-3-14 Heating Water FlowCon E-JUST1.Y. G 0.80 1.00 2.5 - 58 6.00 TU-3-15 Heating Water FlowCon E-JUST1.Y. G 0.80 1.00 2.5 - 58 7.00 TU-3-16 Heating Water FlowCon E-JUSTI.Y. G 2.00 2.10 2.5 - 58 7.00 TU-3-17 Heating Water FlowCon E-JUST1.Y. G 0.80 1.00 2.5 - 58 8.00 TU-3-18 Heating Water FlowCon E-JUST1.Y. G 0.80 1.00 2.5 - 58 8.00 TU-3-19 Heating Water FlowCon E-JUSTI.Y. G 0.80 1.00 2.5 - 58 8.00 TU-3-20 Heating Water FlowCon E-JUST2.Y. G 4.60 4.50 2.5 - 58 8.00 TU-3-24 Heating Water FlowCon E-JUST1.Y. G 0.80 1.00 2.5 - 58 10.00 Totals : - - 24 27.1 - - NOTES: Airiest Co Inc Preliminary Test and Balance Report 15 of 15 RUSKIN® 3900 Dr. Greaves Rd. • Kansas City, MO 64030 (816) 761-7476 FAX (816) 765-8955 INSTALLATION INSTRUCTIONS 11/2 HOUR UL CLASSIFIED CURTAIN TYPE (D)IBD20, (D)IBD40, and (D)IBD60 FIRE DAMPERS WITH INTEGRAL SLEEVES APPLICATION The (D)IBD20, (D)IBD40, and (D)1BD60 fire dampers include sleeves that are an integral part of the damper frame and are approved for installation without the need for a supplemental, field - installed sleeve. The fire damper models shown on this sheet are marked with a 11/2 hour fire damper label and are approved for use in fire walls or masonry floors with ratings of less than 3 hours. Static and Dynamic dampers must be installed with leading edge of the closed blades within the wall or floor. STATIC FIRE DAMPERS Not for use in Dynamic (fans on) Systems MODELS IBD20, IBD40, and IBD60 MAXIMUM SIZE Single Section Vertical Installation — 48"w x 30"h (1219 x 762) or 33"w x 72"h (838 x 1829) or 36"w x 36"h (814 x 914) Horizontal Installation — 30"w x 451/2"h (762 x 1156) or 33"w x 38"h (838 x 965) Multiple Section Assembly Vertical Installation —120"w x 72"h (3048 x 1829) Horizontal Installation — 90"w x 91 "h (2286 x 2311) DYNAMIC FIRE DAMPERS Use in Dynamic (fans on) or Static (fans off) Systems MODELS DIBD20, DIBD40, and DIBD60 MAXIMUM SIZE Single Section Vertical Installation — 33"w x 36"h (838 x 914) Horizontal Installation — 24"w x 24"h (610 x 610) Multiple Section Assembly Vertical Installation — 72"w x 48"h (1828 x 1219) or 48"w x 72"h (1219 x 1828) or 120"w x 24"h (3048 x 610) Horizontal Installation — Refer to "X" models below. MODELS DIBD20X, DIBD40X, and DIBD6OX MAXIMUM SIZE Single Section Vertical Installation —18"w x 24"h (457 x 610) Horizontal Installation — 18"w x 24"h (457 x 610) or 24"w x 18"h (610 x 457) Multiple Section Assembly Horizontal Installation — 36"w x 48"h (914 x 1219) or 48"w x 36"h (1219 x 914) Notes: 1. Dimensions shown in parentheses ( ) indicate millimeters. 2. All multiple section dampers are constructed of equal single section sizes no greater than the maximum single section sizes indicated above. INSTALLATION SUPPLEMENTS Refer to the appropriate Ruskin installation instructions supple- ments for additional information or special requirements: • Optional Sealant of Dampers in Fire Rated Walls or Floor Openings • Transfer Openings and Duct Terminations for 11/2 Hour and 3 Hour Fire Dampers • Optional FireStop Material • Extension of Fire and Combination Fire and Smoke Damper Sleeves • Fire and Combination Fire and Smoke Dampers Installation in Concrete Floor with Steel Deck • Drivemate No. 14880 Breakaway Connections • Flanged System Breakaway Connections • Mullions for Dampers in Oversized Wall Openings RECEIVED CITY OF TUKWILA OCT 082014 PERMIT CENTER -Wit California State Fire Marshal Listing No. 3225-245:005 II-IBD20-114/Replaces II-IBD20-610 ALL STATED SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE OR OBLIGATION. ©Ruskin 2014 1. Opening Clearance The opening in the wall or floor shall be larger than the damper/sleeve assembly to permit installation or expansion. For two angle installations the opening shall be a minimum of 1/s" per foot (3 per 305) larger than the overall size of the damper/sleeve assembly. The maximum opening size shall not exceed 1/8" per foot (3 per 305) plus 2" (51), nor shall the opening be less than 1/4" (6) larger than the damper/sleeve assembly. For one angle installations, the opening shall be a minimum of 1/4" (6) to a maxi- mum of 1" (25) larger than the overall size of the damper/sleeve assembly. The opening may be as much as 2" (51) larger than the damper/ sleeve assembly if a 16ga (1.6) mounting angles is uti- lized. 2. Fasteners and Multiple Section Assembly Use No. 10 (M5) bolts or screws, 3/16" (5) rivets, tack welds or spot welds as depicted in figures 3 and 4 and spaced as follows when joining individual dampers to make multiple section damper assemblies or when fastening damper to the sleeve: Vertical Mount (In wall) Galvanized steel dampers 12" (305) spacing Horizontal Mount (In floor) All dampers 6" (152) spacing Multiple section horizontal mount dampers require a 14 gage thick x 41/2" (2 x 114) wide steel reinforcing plate sandwiched between the damper frames with 1/2" (13) long welds staggered intermit- tently and spaced on maximum 6" (152) centers. The reinforcing plate must be the same material as the dampers. The length must be equal to the damper width of two or more adjoining damper sections. Reinforcing plates are not required for assemblies con- sisting of two dampers attached end -to -end or three dampers attached side -to -side as depicted in figure 5. 3. Damper Sleeve Sleeve thickness must be equal to or thicker than the duct con- nected to it. Sleeve gage requirements are listed in the SMACNA Fire, Smoke and Radiation Damper Installation Guide for HVAC Systems and in NFPA90A. If a breakaway style duct/sleeve con- nection is not used, the sleeve shall be a minimum of 16 gage (1.6) for dampers up to 36" (914) wide by 24" (610) high and 14 gage (1.9) for dampers exceeding 36" (914) wide by 24" (610) high. Damper sleeve shall not extend more than 6" (152) beyond the fire wall or partition unless damper is equipped with a factory installed access door. Sleeve may extend up to 16" (406) beyond the fire wall or partition on sides equipped with a factory installed access door. Sleeve shall terminate at both sides of wall within dimensions shown. 4. Damper Orientation Use "Air Flow" and "Mount with Arrow Up" labels on Dynamic DIBD and DIBDX models for proper damper orientation. For Static IBD models use only "Mount With Arrow Up" label on damper for proper damper orientation. Static and Dynamic dampers must be installed with leading edge of the closed blades within the wall or floor. 5. Mounting Angles Mounting angles shall be a minimum of 11/2" x 11/2" x 20 gage steel (38 x 38 x 1.0). For openings in metal stud, wood stud walls or concrete/masonry walls and floors of sizes 90" x 49" or 49" x 90" (2286 x 1245 or 1245 x 2286) and Tess mounting angles are only required on one side of the wall or top side of the floor. The angles must be attached to both the sleeve and the wall or floor. Mounting angles may be installed directly to the metal stud under the wall board on metal stud wall installations only. Larger open- ings require mounting angles on both sides of the partition and must be attached only to the sleeve. Mounting angles must over- lap the partition a minimum of 1" (25). Do not weld or fasten angles together at corners of dampers. Ruskin fire dampers may be installed using Ruskin FAST angle for one angle installation or Ruskin PFMA for two angle installations. a. Mounting Angle Fasteners Sleeve: #10 bolts or screws, 3/16" (5) steel rivets or 1/2" (13) long welds. Masonry/Wall or Floor: #10 self -tapping concrete screws. Wood/Steel Stud Wall: #10 screws b. Mounting Angle Fastener Spacing For one angle installations the sleeve fasteners shall be spaced at 6" (152) o.c. and the wall or floor fasteners shall be spaced at 12" (305) o.c. with a minimum of 2 fasteners on each side, top and bottom. Screw fasteners used in metal stud must engage the metal stud a minimum of 1/2" (13). Screw fasteners used in wood stud must engage the wood stud a minimum of 3/4" (19). Screw fasteners used in masonry walls or floors must engage the wall a minimum of 11/2" (38). For two angle installa- tions the fasteners shall be spaced at 8" (203) o.c. 6. Duct/Sleeve Connections a. Break -away Duct/Sleeve Connections Rectangular ducts must use one or more of the connections depicted: below: PLAIN "S" SUP STANDING S HEMMED "S" SUP STANDING S (ANGLE REINFORCED) DOUBLE "S" SLIP INSIDE SLIP JOINT STANDING (ALT.) STANDING S (BAR REINFORCED) STANDING S DRIVE SLIP JOINT (ANGLE REINFORCED) A maximum of two #10 sheet metal screws on each side and the bottom, located in the center of the slip pocket and pene- trating both sides of the slip pocket may be used. Connections using these slip joints on the top and bottom with flat drive slips up to 20" (508) long on the sides may also be used. b. Round and Oval Break -away Connections Round and flat oval break -away connections must use either a 4" (102) wide drawband or #10 sheet metal screws spaced equally around the circumference of the duct as follows: Duct diameters 22" (559) and smaller — Maximum 3 screws. Duct diameters over 22" (559) and including 36" (914) — Maximum 5 screws. Duct diameters over 36" (914) and up to and including 191" (4851) total perimeter — Maximum 8 screws. For flat oval ducts, the diameter is considered the largest (major) dimension of the duct. Note: When optional sealing of these joints is desired, the fol- lowing sealants may be applied in accordance with the sealant manufacturer's instructions: Design Polymerics — DP 1010 Precision — PA2084T Hardcast, Inc. — Iron Grip 601 Eco Duct Seal 44-52 c. Flanged Break -away Style Duct Sleeve Connections. Flanged connection systems manufactured by Ductmate, Nexus or Ward are approved break -away connections when installed as shown on the Flanged System Breakaway Connections Supplement. TDC and TDF roll -formed flanged connections using 3/8" (10) steel bolts and nuts, and metal cleats, as tested by SMACNA, are approved break -away connections when installed as shown on the Flanged System Breakaway Connections Supplement. d. Non -Break -away Duct/Sleeve Connections If other duct sleeve connections are used, the sleeve shall be a minimum of 16 gage (1.6) for dampers up to 36" (914) wide x 24" (610) high and 14 gage (2.0) for dampers exceeding 36" (914) wide x 24" (610) high. 7. Installation and Maintenance To ensure optimum operation and performance, the damper must be installed so it is square and free from racking. Each fire damper should be maintained and tested on a regular basis and in accordance with the latest editions of NFPA 90A and local codes. Care should be exercised to ensure that such tests are performed safely and do not cause system damage. I 0 o r o 1" (25) min. typical overlap on all sides of damper i VERTICAL INSTALLATION Damper is properly installed when leading edge of closed blades is within the wall. 6" or 16" (152 or 406) Max. See Note 3 Wall TWO ANGLE INSTALLATION See Note 5 l/a" (6) Min. See Note 1 Sleeve See Note 3 FIGURE 1 Wall 1" (25) min. typical overlap on all sides of damper 6" or 16" (152 or 406) Max. See Note 3 ONE ANGLE INSTALLATION l/d' (6) Min. See Note 1 Sleeve See Note 3 HORIZONTAL INSTALLATION Damper is properly installed when leading edge of closed blades is within the wall. Duct Connections Style A Style B 6 or 16" (152 or 406) Max. I See Note 3 I Style CR, & CO Sleeve See Note 3 r TWO ANGLE INSTALLATION 1" (25) Min. typical overlap Sleeve on all sides of See Note 3 damper Masonry Floor/ Ceiling See Note 5 1/4" (6) Min. See Note 1 I 6 or 16" (152 or 406) Max. See Note 3 FIGURE 2 Duct Connections Style A Style B Style C, CR, & CO 1" (25) Min. typical overlap on all sides of damper Masonry Floor/ Ceiling See Note 5 i/a" (6) Min. See Note 1 ONE ANGLE INSTALLATION VERTICAL INSTALLATION 12" (305) Max.c-c 12" (305) Max. FIGURE 3 12" (305) Max.c-c )1. 3" (76) Max. See Note 2 FASTENER SPACING HORIZONTAL INSTALLATION 6" (152) Max.c-c 3" (76) Max. See Note 2 Reinforcing Plate See Note 2 FIGURE 4 REINFORCING PLATE No Reinforcing Plate Req'd No Reinforcing Plate Req'd `\_ Reinforcing Plate required on 2 or more adjoining sections See Note 2 FIGURE 5 RECOMMENDED FRAMING FOR OPENINGS IN WOOD AND METAL STUD WALLS i t_24"(610) ' -O.C. Max, (metal studs) O.C.24"Max(610) (metal studs) — Ceiling Ru I 12" (305) , — t 24" (610) O.C. Max.—'� _ — 2 /— Screwsd� 2" (Si) 2' S`'1) Floor Runner Figure 1 24" (610) — O.C. Max. Detail A -A Figure 2 Ceiling Runner INSTRUCTIONS 1. Frame wall openings as shown in figure 1 or 2. 2. Double vertical studs are not required for openings 36"w x 36"h (914 x 914) or smaller. 3. All construction and fasteners must meet the requirements of the appropriate wall design and/or local codes. 4. Consult the authority having jurisdiction for other acceptable framing methods. NOTE The Metal Stud Construction and Wood Stud Construction figures at the bottom of the page depict mounting angles installed on both sides of the partition. A single angle may be sufficient. Refer to the instructions for single angle installa- tion requirements. Notched Piece Bent Down Metal Stud Framing Shown A -A Floor Runner RUSKIN® 3900 Dr. Greaves Rd. Kansas City, MO 64030 (816) 761-7476 FAX (816) 765-8955 www.ruskin.com Printed on recycled paper `S using vegetable based inks ,'3()% RUSKIN® 3900 Dr. Greaves Rd. • Kansas City, MO 64030 (816) 761-7476 FAX (816) 765-8955 INSTALLATION INSTRUCTIONS FSD35, FSD36 AND FSD37 COMBINATION FIRE and SMOKE DAMPERS 11h HOUR UL555 RATED UL555S LEAKAGE RATED CLASS 1, 2 AND 3 APPLICATION The FSD35, FSD36 and FSD37 are combination fire and smoke dampers designed to restrict the passage of flame and resist the passage of smoke. These combination fire and smoke dampers are designed for installation with the blades running horizontally. The standard installation is with the leading edge of the blade with- in the wall or floor. For out of the wall or masonry floor installations refer to the GA or OW version of the FSD35 and FSD36. FSD35 and FSD36 MAXIMUM UL CLASSIFIED SIZES — OPPOSED BLADES Single section vertical or horizontal — 36"w x 48"h (914 x 1219) Multiple section vertical — 126"w x 96"h (3200 x 2438) or 72"w x 122"h (1829 x 3099) Multiple section horizontal —144"w x 96"h (3658 x 2438) FSD37 MAXIMUM UL CLASSIFIED SIZES — OPPOSED BLADES Single section vertical — 32"w x 48"h (813 x 1219) Single section horizontal — 30"w x 48"h (762 x 1219) Multiple sections vertical —120"w x 96"h (3048 x 2438) Multiple sections horizontal — 144"w x 96"h (3658 x 2438) Dimensions shown in parentheses ( ) indicate millimeters. INSTALLATION SUPPLEMENTS Refer to the appropriate Ruskin installation instruction supplements for additional information or special requirements: • Optional Sealant of Dampers in Fire Rated Wall or Floor Openings • Transfer Openings and Duct Terminations • Optional FireStop Material • Extension of Fire and Combination Fire and Smoke Damper Sleeves • Fire and Combination Fire and Smoke Damper Installation in Concrete Floor with Steel Deck • Drivemate No. 14880 Breakaway Connection • Flanged System Breakaway Connections • Cavity Shaft Wall Metal Stud Framing • TS150 FireStat for "Reopenable" Combination Fire and Smoke Dampers • SP100 Switch Package • EFL Electric Resettable "Fuse" Link • EFL/SP100 Electric Resettable "Fuse" Link • PFL Pneumatic Fuse Link • DSDF Flow Rated Duct Smoke Detector • DSDN No -Flow Rated Duct Smoke Detector RECEIVED CITY OF TUKWILA OCT 0 8 2014 PERMIT CENTER uoss Califomia State Fire Marshal Listing No. FSD35 — 3235-0245:0125 FSD36 — 3235-0245:0124 FSD37 — 3235-0245:0127 NYC Department Of Building MEA 252-05-E II-FSD36-114/ Replaces II-FSD36-610 ALL STATED SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE OR OBLIGATION. ©Ruskin 2014 1. Opening Clearance The opening in the wall or floor shall be larger than the damper/ sleeve assembly to permit installation or expansion. For two angle installations the opening shall be a minimum of 1/8" per foot (3 per 305) larger than the overall size of the damper/sleeve assembly. The maximum opening size shall not exceed 1/8" per foot (3 per 305) plus 2" (51), nor shall the opening be less than 1/4" (6) larger than the damper/sleeve assembly. For one angle installations, the opening shall be a minimum of 1/4" (6) to a maximum of 1" (25) larger than the overall size of the damper/sleeve assembly. The opening may be as much as 2" (51) larger than the damper/ sleeve assembly if a 16ga (1.6) mounting angles is utilized. 2. Fasteners and Multiple Section Assembly When joining multiple damper assemblies or fastening the damper to the sleeve, dampers shall be fastened with 1/4-20 (M6) bolts, number 10 (M5) screws, or 1/2" (13) long welds staggered intermit- tently on both sides. Space fasteners 6" (152) on center and a max- imum 2" (51) from the ends of the joining sections or from each cor- ner. When joining multiple damper assemblies, a continuous 1/8" (3) bead of Dow -Corning 999-A, Dow -Corning Silastic 732 RTV, or GE RTV 108 sealant shall be applied on the mullion joint. Press the sur- face of the sealant in place to dispel any air. Another bead of the same sealant shall be applied between the damper and sleeve in the same manner. Only one side of the damper requires caulking. Note the sealant is not required when dampers are supplied for fire damper applications only and are not required to be leakage rated. Multiple section high vertical mount dampers include a 14 gage x 5" (2 x 127) wide steel mullion plate sandwiched between the damper frames where required. The mullion plate must be the same materi- al as the dampers. 3. Damper Sleeve Sleeve thickness must be equal to or thicker than the duct connect- ed to it. Sleeve gage requirements are listed in the SMACNA Fire, Smoke and Radiation Damper Installation Guide for HVAC Systems and in NFPA90A. If a breakaway style duct/sleeve connection is not used, the sleeve shall be a minimum of 16 gage (1.6) for dampers up to 36" (914) wide by 24" (610) high and 14 gage (1.9) for dampers exceeding 36" (914) wide by 24" (610) high. Damper sleeve shall not extend more than 6" (152) beyond the fire wall or partition unless damper is equipped with an actuator and/or factory installed access door. Sleeve may extend up to 16" (406) beyond the fire wall or partition on sides equipped with actuator and/or fac- tory installed access door. Sleeve shall terminate at both sides of wall within dimensions shown. 4. Damper Orientation Damper is designed to operate with blades running horizontally and must be installed with center line of damper frame within the wall or floor when they are in the closed position. Use "Mount With Arrow Up" label as a guide for proper damper orientation. Horizontal mount dampers may be installed with actuator above or below the floor. 5. Mounting Angles Mounting angles shall be a minimum of 11/2" x 11/2" x 20 gage steel (38 x 38 x 1.0). For openings in metal stud, wood stud and con- crete/masonry walls of sizes 90" x 49" or 49" x 90" (2286 x 1245 or 1245 x 2286) and less mounting angles are only required on one side of the wall or top side of the floor and must be attached to both the sleeve and the wall. Mounting angles may be installed directly to the metal stud under the wall board on metal stud wall installations only. Larger openings installations require mounting angles on both sides of the partition and must be attached only to the sleeve. Mounting angles must overlap the partition a minimum of 1" (25). Do not weld or fasten angles together at corners of dampers. Ruskin fire/smoke dampers may be installed using Ruskin FAST angle for one angle installation or Ruskin PFMA for two angle instal- lations. a. Mounting Angle Fasteners Sleeve: #10 bolts or screws, 3/16" (5) steel rivets or 1/2" (13) long welds. Masonry/Wall or Floor: #10 self -tapping concrete screws. Wood/Steel Stud Wall: #10 screws b. Mounting Angle Fastener Spacing For one angle installations the sleeve fasteners shall be spaced at 6" (152) o.c. and the wall fasteners shall be spaced at 12" (305) o.c. with a minimum of 2 on each side, top and bottom. Screw fasteners used in metal stud must engage the metal stud a minimum of 1/2" (13). Screw fasteners used in wood stud must engage the wood stud a minimum of 3/4" (19). Screw fasteners used in masonry walls or floors must engage the wall or floor a minimum of 11/2" (38). For two angle installations the fasteners shall be spaced at 8" (203) o.c. 6. Duct/Sleeve Connections a. Break -away Duct/Sleeve Connections Rectangular ducts must use one or more of the connections depicted below PLAIN'S' SUP STANDING S h HEMMED 'S SUP DOUBLE'S' SLIP INSIDE SUP JOINT STANDING S STANDING (ALT) STANDING S (ANGLE REINFORCED) (BAR REINFORCED) STANDING S (ANGLE REINFORCED) DRIVE SLIP JOINT A maximum of two #10 (M5) sheet metal screws on each side and the bottom, located in the center of the slip pocket and pene- trating both sides of the slip pocket may be used. Connections using these slip joints on the top and bottom with flat drive slips up to 20" (508) long on the sides may also be used. b. Round and Oval Break -away Connections Round and flat oval break -away connections must use either a 4" (102) wide drawband or #10 (M5) sheet metal screws spaced equally around the circumference of the duct as follows: • Duct diameters 22" (559) and smaller — maximum 3 screws. • Duct diameters over 22" (559) and including 36" (914) — maximum 5 screws. • Duct diameters over 36" (914) and up to and including 191" (4851) total perimeter — maximum 8 screws. For flat oval ducts, the diameter is considered the largest (major) dimension of the duct. These connections are depicted in the SMACNA Fire, Smoke, and Radiation Damper Installation Guide. Note: When optional sealing of these joints is desired, the follow- ing sealants may be applied in accordance with the sealant man- ufacturer's instructions: Design Polymerics — DP 1010 Precision — PA2084T Hardcast, Inc. — Iron Grip 601 Eco Duct Seal 44-52 c. Flanged Break -away Style Duct/Sleeve Connections. Flanged connection systems manufactured by Ductmate, Nexus or Ward are approved break -away when installed as shown on the Flanged System Breakaway Connections Supplement. TDC and TDF roll -formed flanged connections using 3/8" (10) steel bolts and nuts, and metal cleats, as tested by SMACNA, are approved break -away connections when installed as shown on the Flanged System Breakaway Connections Supplement. d. Non -Break -away Duct/Sleeve Connections If other duct/sleeve connections are used, the sleeve shall be a minimum of 16 gage (1.6) for dampers up to 36" (914) wide x 24" (610) high and 14 gage (2.0) for dampers 36" (914) wide x 24" (610) high. 7. Actuator Connections Electric and pneumatic actuators are to be connected in accordance with wiring and piping diagrams developed in compliance with applicable codes, ordinances and regulations. 8. Installation and Maintenance To ensure optimum operation and performance, the damper must be installed so it is square and free from racking. Each fire/smoke damper should be maintained, cycled and tested at intervals not less than every six months and in accordance with the latest edi- tions of NFPA 90A, 92A, UL864, local codes and in accordance with actuator manufacturer recommendations. Care should be exercised to ensure that such tests are performed safely and do not cause system damage. VERTICAL INSTALLATION Damper may be installed with actuator on either side of the partition in accordance with the mounting label on the damper. 1" (25) Minimum Typical Overlap �ii1iii''' on all Sides of Partition Wall See instruction #5 16"(406) Maximum 6" (152) Maximum 1/4" (6) Minimum FAST ANGLE (ONE ANGLE) INSTALLATION Angle may be installed on either side of the partition. 1" (25) Minimum Typical Overlap ion all Sides of Partition Wall See instruction #5 16" (406) Maximum 6" (152) Maximum 1/4" (6) 1 Minimum TWO ANGLE INSTALLATION Angles are required on both sides oftoe partition. ITEM DESCRIPTION 1. Actuator (location may vary). 2. Optional FireStat or SP-100. 3. Auxiliary Operating Jackshaft 4. Damper 5. Over -Center Link ITEM DESCRIPTION 6. Sleeve 7. Caulking Material (may be on either side of damper frame). 8. Mounting Angles (PFMA, FAST or conventional angles) 9. Duct/sleeve connection. HORIZONTAL INSTALLATION Damper may be installed with actuator on either side of the floor in accordance with the mounting label on the damper. 1" (25) Minimum Typical Overlap on all Sides of Partition Wall V4" (6) Minimum 16" (405) Maximum 6" (152) Maximum See instruction #5 TWO ANGLE INSTALLATION Angles are required on both sides of the floor. 1" (25) Minimum 1ypicai Overlap on all Sides of Floor 1/4" (6) Minimum 1- See instruction #5 16° (406) Maximum 6" (152) Maximum FAST ANGLE (ONE ANGLE) INSTALLATION Angle may be installed on top of floor. RECOMMENDED FRAMING FOR OPENINGS IN WOOD AND METAL STUD WALLS I } L24"(610) 1 -O.C. Max.', (metal studs) 24"(610) 'O.C. Max' (metal studs)_ — — Ceiling Runner 12" (305) — — t 24" (610) O.C. Max.H _ J — Pan2h . eact y- Screws --i ---r)- ^" (51) 2 S5t) •j1_16"(406)� .C. Max. (wood studs) L16"(406)� O.C. Max. (wood studs) T Floor Runner Figure 1 Figure 2 Ceiling Runner INSTRUCTIONS 1. Frame wall openings as shown. 2. Double vertical studs are not required for openings 36"w x 36"h (914 x 914) or smaller. 3. All construction and fasteners must meet the requirements of the appropriate wall design and/or local codes. 4. Consult the authority having jurisdiction for other acceptable framing methods. NOTE: The Metal Stud Construction and Wood Stud Construction figures at the bottom of the page depict mounting angles installed on both sides of the partition. A single angle may be sufficient. Refer to the instructions for single angle installa- tion requirements. Notched Piece Bent Down Metal Stud Framing Shown A -A Floor Runner MAXIMUM UL CLASSIFIED SIZE (Vertical Installation) FSD36 See Notes 1, 2 Notes: 1. All multiple section dampers are constructed of equal single section sizes no greater than the maximum single section sizes indicated above. 2.Two section high dampers require a 14 gage reinforcing plate unless overall height is Tess than 91" (2311) and width is less than 32" (813). When using two individually sleeved units, the MAXIMUM UL CLASSIFIED SIZE (Horizontal Installation) FSD36 sleeve acts as the reinforcing plate, therefore no plate is required. 3. Horizontal dampers over 3 sections wide and 1 section high require a 14 gage reinforcing plate. When using two individu- ally sleeved units, the sleeve acts as the reinforcing plate, therefore no plate is required. MULTIPLE ACTUATOR DAMPER ASSEMBLIES Damper assemblies requiring more than one actuator must have all actuators wired to single heat actuated device (EFL or TS150) as shown below. This is required for simultaneous closure of all sections. Junction box as required Metallic conduit for factory wiring %-max. 6" (152) run ti 1 1 TYPICAL SHIP SECTION DETAIL Note: All actuators must be wired to single thermal device. Factory supplied pigtail for installer connection to utility box See detail for ship section connection Factory wired pigtail from upper ship section (field wired to utility box) Factory supplied conduit fitting attached to box at factory 4 x 4 utility box with terminal strip Factory wired to thermal device See Ruskin Installation Instruction for specific thermal device required SHIP SECTION FIELD CONNECTION Note: Installer to run supply power to damper assembly thru thermal device. Factory wired from ship section containing thermal device RUSKIN® 3900 Dr. Greaves Rd. Kansas City, MO 64030 (816) 761-7476 FAX (816) 765-8955 www.ruskin.com Printed on recycled paper using vegetable based inks VI♦ City of Tukwila Department of Community Development 10/1/2014 Jim Haggerton, Mayor Jack Pace, Director DAN JARDINE 2025 FIRST AVE, SUITE 300 SEATTLE, WA 98121 RE: Permit No. M14-0088 CASCADE BEHAVIORAL HOSPITAL Dear Permit Holder: In reviewing our current records, the above noted permit has not received a final inspection by the City of Tukwila Building Division. Per the International Building Code, International Mechanical Code, Uniform Plumbing Code and/or the National Electric Code, every permit issued by the Building Division under the provisions of these codes shall expire by limitation and become null and void if the building or work authorized by such permit has not begun within 180 days from the issuance date of such permit, or if the building or work authorized by such permit is suspended or abandoned at any time after the work has begun for a period of 180 days. Your permit will expire on 11/2/2014. Based on the above, you are hereby advised to: 1) Call the City of Tukwila Inspection Request Line at 206-438-9350 to schedule for the next or final inspection. Each inspection creates a new 180 day period, provided the inspection shows progress. -or- 2) Submit a written request for permit extension to the Permit Center at least seven(7) days before it is due to expire. Address your extension request to the Building Official and state your reason(s) for the need to extend your permit. The Building Code does allow the Building Official to approve one extension of up to 180 days. If it is determined that your extension request is granted, you will be notified by mail. In the event you do not call for an inspection and/or receive an extension prior to 11/2/2014, your permit will become null and void and any further work on the project will require a new permit and associated fees. Thank you for your cooperation in this matter. Sincerely, Bill Rambo Permit Technician File No: M14-0088 6300 Southcenter Boulevard Suite #100 • Tukwila, Washington 98188 • Phone 206-431-3670 • Fax 206-431-3665 PERMIT COORD COP\ PLAN REVIEW/ROUTING SLIP PERMIT NUMBER: M14-0088 DATE: 07/16/2014 PROJECT NAME: CASCADE BEHAVIORAL HOSPITAL SITE ADDRESS: 12844 MILITARY RD S Original Plan Submittal Revision # before Permit Issued Response to Correction Letter # X Revision # 1 after Permit Issued DEPARTMENTS: v1U Building Division 4i Public Works n Fire Prevention Structural n Planning Division Permit Coordinator n PRELIMINARY REVIEW: Not Applicable ❑ (no approval/review required) DATE: 07/22/14 Structural Review Required REVIEWER'S INITIALS: DATE: n APPROVALS OR CORRECTIONS: DUE DATE: 08/19/14 Approved Approved with Conditions n Corrections Required U Denied (corrections entered in Reviews) (ie: Zoning Issues) Notation: REVIEWER'S INITIALS: DATE: Permit Center Use Only CORRECTION LETTER MAILED: Departments issued corrections: Bldg ❑ Fire ❑ Ping ❑ PW ❑ Staff Initials: 12/18/2013 PERMIT COORD COPY PLAN REVIEW/ROUTING SLIP PERMIT NUMBER: M14-0088 DATE: 04/23/14 PROJECT NAME: CASCADE BEHAVIORAL HOSPITAL SITE ADDRESS: 12844 MILITARY RD S X Original Plan Submittal Response to Correction Letter # Revision # Revision # before Permit Issued after Permit Issued DEPARTMENTS: M p' C O L`�t/\ Building Division Public Works n ALIA c Fire Prevention Structural Planning Division Permit Coordinator N PRELIMINARY REVIEW: Not Applicable n (no approval/review required) REVIEWER'S INITIALS: DATE: 04/24/14 Structural Review Required DATE: APPROVALS OR CORRECTIONS: Approved Corrections Required (corrections entered in Reviews) Approved with Conditions Denied (ie: Zoning Issues) DUE DATE: 05/22/14 Notation: REVIEWER'S INITIALS: DATE: Permit Center Use Only CORRECTION LETTER MAILED: Departments issued corrections: Bldg ❑ Fire ❑ Ping ❑ PW ❑ Staff Initials: 12/18/2013 PROJECT NAME: Cascade Behavior Hospital PERMIT NO: SITE ADDRESS: 12844 Military Rd S _ORIGINAL ISSUE DATE: REVISION LOG REVISION NO. DATE RECEIVED STAFF INITIALS ISSUED DATE STAFF INITILS 1 07/16/2014 JEM $ '�i— Summary of Revision: changes to better facilitate program — elimination of kitchenette in day rm, dispensing room and charting area — revision to utility room — addition of storage room, quiet room, med room, security gates & screen, exam room, etc. Received by: ,.6./. IA C.AAA A A REVISION NO. DATE RECEIVED STAFF INITIALS ISSUED DATE STAFF INITIALS Summary of Revision: Received by: (please print) REVISION NO. DATE RECEIVED STAFF INITIALS ISSUED DATE STAFF INITIALS Summary of Revision: Received by: (please print) REVISION NO. DATE RECEIVED STAFF INITIALS ISSUED DATE STAFF INITIALS Summary of Revision: Received by: (please print) REVISION NO. DATE RECEIVED STAFF INITIALS ISSUED DATE STAFF INITIALS Summary of Revision: Received by: (please print) REVISION NO. DATE RECEIVED STAFF INITIALS ISSUED DATE STAFF INITIALS Summary of Revision: Received by: please print City of Tukwila Department of Community Development 6300 Southcenter Boulevard, Suite #100 Tukwila, Washington 98188 Phone: 206-431-3670 Web site: http://www.TukwilaWA.gov REVISION SUBMITTAL Revision submittals must be submitted in person at the Permit Center. Revisions will not be accepted through the mail, fax, etc. Date: 07/17/2014 Plan Check/Permit Number: M14-0088 Response to Incomplete Letter # Response to Correction Letter # Revision # 1 after Permit is Issued Revision requested by a City Building Inspector or Plans Examiner Project Name: Cascade Behavioral Hospital 3W/3N Remodel Project Address: 12844 Military Road S. Contact Person: Dan Jardine Phone Number: (206) 441-4522 Summary of Revision: Revisions to plans as requested by Owner to better facilitate their program. Changes include: ^"V ilterointeltiLA 1. Elimination of kitchenette in Day Room and creation of storage room. f, r 2. Elimination of dispensing room and office and creation of quiet room for patients. �'� 1 6 10l/ 3. Elimination of charting area behind nurse station and creation of a medications 4. Revised clean utility room and addition of washer and dryer to soiled utility room.room. PERM/7cEig. 7 5. Addition of gates and countertop security screen at nurse station. 6. Addition of communications closets at Exam Room to secure existing telephone and nurse call panels. 7. Addition of interior windows at day room and quiet room. Changes are clouded on the drawings and noted as 'Design Revisions" Sheet Number(s): All 'M, mechanical drawings. Affected drawings are noted in Revision block "Cloud" or highlight all areas of revision including date of revision Received at the City of Tukwila Permit Center by:\:Jv" [ • Entered in Permits Plus on 01 H:\Applications\Forms-Applications On Line\2010 Applications \7-2010 - Revision Submittal.doc Revised: May 2011 ALPA CONSTRUCTION INC Page 1 of 2 ilk Washington State Department of Labor & Industries ALPA CONSTRUCTION INC Owner or tradesperson IWANIEC, KATARZYNA Principals IWANIEC, KATARZYNA, PRESIDENT WA UBI No. 603 317 548 330 FAIRBANK ST ADDISON, IL60101 630-628-7930 Business type Corporation License Verify the contractor's active registration / license / certification (depending on trade) and any past violations. Construction Contractor License specialties GENERAL License no. ALPACCI865C7 Effective — expiration 02/25/2014— 02/25/2016 Bond Ohio Cas Ins Co Bond account no. 32S426539 Active. Meets current requirements. $12,000.00 Received by L&I Effective date 02/25/2014 02/21/2014 Insurance Travelers Indemnity Company Th $1,000,000.00 Policy no. DTCO7B006888TIA13 Received by L&I Effective date 02/25/2014 06/01/2013 Expiration date 06/01/2014 Savings No savings accounts during the previous 6 year period. Lawsuits against the bond or savings No lawsuits against the bond or savings accounts during the previous 6 year period. Tax debts No tax debts during the previous 6 year period. License Violations https://secure.lni.wa.gov/verify/Detail.aspx?UBI=603317548&LIC=ALPACCI865C7&SAW= 05/06/2014