Loading...
HomeMy WebLinkAboutPermit PG14-0187 - BOEING #9-101 - BACKFLOW PREVENTERBOEING #9-1O1 9725 E MARGINAL WAY S PG14-0187 Parcel No: Address: City of Tukwila Department of Community Development 6300 Southcenter Boulevard, Suite #100 Tukwila, Washington 98188 Phone: 206-431-3670 Inspection Request Line: 206-438-9350 Web site: http://www.TukwilaWA.Rov PLUMBING/GAS PIPING PERMIT 0003400018 Permit Number: PG14-0187 9725 E MARGINAL WAY S BLDG 9-101 Project Name: BOEING #9-101 Issue Date: 12/19/2014 Permit Expires On: 6/17/2015 Owner: Name: Address: Contact Person: Name: Address: Contractor: Name: Address: License No: Lender: Name: Address: BOEING COMPANY THE PO BOX 3707 M/C 20-00 PROPERTY TAX DEPT, SEATTLE, WA, 98124 CONNIE HARDIN 4600 S 134 PL , SEATTLE, WA, 98168 HOLADAY PARKS, INC. PO BOX 69208 , SEATTLE, WA, 98188 HOLADP1379NO Phone: (206) 250-4530 Phone: (206) 248-9700 Expiration Date: 9/3/2015 DESCRIPTION OF WORK: ADD (1) 3/4" 009 WATTS BACKFLOW PREVENTER IN MECHANICAL MEZZANINE ROOM. Valuation of Work: $500.00 Water District: TUKWILA Sewer District: TUKWILA SEWER SERVICE,VALLEY VIEW SEWER SERVICE Fees Collected: $164.58 Current Codes adopted by the City of Tukwila: International Building Code Edition: International Residential Code Edition: International Mechanical Code Edition: Uniform Plumbing Code Edition: International Fuel Gas Code: Permit Center Authorized Signature: 2012 2012 2012 2012 2012 National Electrical Code: WA Cities Electrical Code: WAC 296-46B: WA State Energy Code: 2014 2014 2014 2012 Date: 1)----(-12-1 I hearby certify that I have read and examined this permit and know the same to be true and correct. All provisions of law and ordinances governing this work will be complied with, whether specified herein or not. The granting of this permit does not presume to give authority to violate or cancel the provisions of any other state or local laws regulating construction or the performance of work. I am authorized to sign and obtain this develop er t afrd, agree o the conditittached to this permit. Signature: Print Name: Date: I -- s't — q This permit shall become null and void if the work is not commenced within 180 days for the date of issuance, or if the work is suspended or abandoned for a period of 180 days from the last inspection. PERMIT CONDITIONS: 1: ***PLUMBING/GAS PIPING PERMIT CONDITIONS*** 2: No changes shall be made to applicable plans and specifications unless prior approval is obtained from the Tukwila Building Division. 3: All permits, inspection records and applicable plans shall be maintained at the job and available to the plumbing inspector. 4: All plumbing and gas piping systems shall be installed in compliance with the Uniform Plumbing Code and the Fuel Gas Code. 5: No portion of any plumbing system or gas piping shall be concealed until inspected and approved. 6: All plumbing and gas piping systems shall be tested and approved as required by the Plumbing Code and Fuel Gas Code. Tests shall be conducted in the presence of the Plumbing Inspector. It shall be the duty of the holder of the permit to make sure that the work will stand the test prescribed before giving notification that the work is ready for inspection. 7: No water, soil, or waste pipe shall be installed or permitted outside of a building or in an exterior wall unless, adequate provision is made to protect such pipe from freezing. All hot and cold water pipes installed outside the conditioned space shall be insulated to minimum R-3. 8: Plastic and copper piping running through framing members to within one (1) inch of the exposed framing shall be protected by steel nail plates not less than 18 guage. 9: Piping through concrete or masonry walls shall not be subject to any load from building construction. No plumbing piping shall be directly embedded in concrete or masonry. 10: All pipes penetrating floor/ceiling assemblies and fire -resistance rated walls or partitions shall be protected in accordance with the requirements of the building code. 11: Piping in the ground shall be laid on a firm bed for its entire length. Trenches shall be backfilled in thin layers to twelve inches above the top of the piping with clean earth, which shall not contain stones, boulders, cinderfill, frozen earth, or construction debris. 12: The issuance of a permit or approval of plans and specifications shall not be construed to be a permit for, or an approval of, any violation of any of the provisions of the Plumbing Code or Fuel Gas Code or any other ordinance of the jurisdiction. 13: The applicant agrees that he or she will hire a licensed plumber to perform the work outlined in this permit. 14: All new plumbing fixtures installed in new construction and all remodeling involving replacement of plumbing fixtures in all residential, hotel, motel, school, industrial, commercial use or other occupancies that use significant quantities of water shall comply with Washington States Water Efficiency ad Conservation Standards in accordance with RCW 19.27.170 and the 2006 Uniform Plumbing Code Section 402 of Washington State Amendments 15: Reduced Pressure Principle Assembly (RPPA)shall be installed per manufacturer's specifications. Upon RPPA installation the backflow shall be tested by a certified tested and copy of the passing test report submitted to Tukwila Public Works Water Department. Thereafter annual backflow test shall be performed at owner's expense, and copies of test results shall be forwarded to the Water Department, phone 206 433-1860. PERMIT INSPECTIONS REQUIRED Permit Inspection Line: (206) 438-9350 8004 GROUNDWORK 1900 PLUMBING FINAL 8005 ROUGH -IN PLUMBING Tenant Name: (-SS S 0 11 J u-Otto CITY OF TUKWILA Community Development Department Permit Center 6300 Southcenter Blvd., Suite 100 Tukwila, WA 98188 hftp://www.TukwilaWA.gov °. bog t' °' I 0 t r Plumbing/Gas Permit No. p I - Project No Date Application. Accepted. 1 t -1 Date Application Expires: r (For office use only) PLUMBING / GAS PIPING PERMIT APPLICATION Applications and plans must be complete in order to be accepted for plan review. Applications will not be accepted through the mail or by fax. **Please Print** SITE LOCATION'. King Co Assessor's Tax No :othoSciOno R Site AddressqJ Feitk l,e:J LAIL ""c PROPERTY OWNER City State: ^ Zip;, c,(l CONTACT PERSON — person areceiving all project communication • Name: it _ (iVW tit t\C1ii.1"• - Address:, Od s 1 _ 4. Pi ciseiaztx. State:updt_ Zips i(' rr Phon10 452c3� daaxI 2etp ub �r ti,VoV i�Gt$:i r 3 PLUMBIN:GCONTRACTOR INFORMATION Company Name: S Address4600C Ci State: Oat_ 1 Z n� LAILJ t, Phorlei,�/ z.�•7r1 gsa)Fax:�C/b�' 4 / i 8 7( e ContrLRV/ d.:LL0o) pr pei N!, xp Date: q _ to ls--- Tukwila Business License No.: ov Valuation of Project (contractor's bid price): $ Scope of Work (please provide detailed information): 4. &C C`) baejeci64.0 C�u " bct upo‘13ts Building Use (per Intl Building Code): Occupancy (per Intl Building Code): Utility Purveyor: Water: Sewer • Suite Number: Floor: 1 New Tenant: D Yes o H:VApplications\Forms-Applications On Line\2011 Applications\Plumbing Permit Application Revised 8-9-11.docx Revised: August 2011 bh Page 1 of 2 Indicate type of plumbing fixtures and/or gas piping outlets being installed and the quantity below: Fixture Type Qty Bathtub or combination bath/shower Dishwasher, domestic with independent drain Shower, single head trap Sinks Rain water system - per drain (inside building) Grease interceptor for commercial kitchen (>750 gallon capacity) Each additional medical gas inlets/outlets greater than 5 Atmospheric -type vacuum breakers not included in lawn sprinkler backflow protections (1-5) Fixture Type Qty j Bidet Drinking fountain or water cooler (per head) Lavatory Urinal Water heater and/or vent Repair or alteration of water piping and/or water treatment equipment Backflow protective device other than atmospheric - type vacuum breakers 2 inch (51 mm) diameter or smaller Atmospheric -type vacuum breakers not included in lawn sprinkler backflow protections over 5 Fixture Type " Qty Clothes washer, domestic Food -waste grinder, commercial Wash fountain Water closet Industrial waste treatment interceptor, including trap and vent, except for kitchen type grease interceptors Repair or alteration of drainage or vent piping Backflow protective device other than atmospheric -type vacuum breakers over 2 inch (51 mm) diameter Gas piping outlets Fixture Type Qty Dental unit, cuspidor Floor drain Receptor, indirect waste Building sewer and each trailer park sewer Each grease trap (connected to not more than 4 fixtures - <750 gallon capacity Medical gas piping system serving 1-5 inlets/outlets for a specific gas Each lawn sprinkler system on any one meter including backflow protection devices PERMIT:APPLICATIONNOTES Value of Construction - In all cases, a value of construction amount should be entered by the applicant. This figure will be reviewed and is subject to possible revision by the Permit Center to comply with current fee schedules. Expiration of Plan Review - Applications for which no permit is issued within 180 days following the date of application shall expire by limitation. The Building Official may grant one extension of time for an additional period not to exceed 180 days. The extension shall be requested in writing and justifiable cause rlenruustlat SecPhniibi.rg-C-ode-feurrent-edi I HEREBY CERTIFY THAT I HAVE READ AND EXAMINED THIS APPLICATION AND KNOW THE SAME TO BE TRUE UNDER PENALTY OF PERJURY BY THE LAWS OF THE STATE OF WASHINGTON, AND I AM AUTHORIZED TO APPLY FOR THIS PERMIT. BUILDING 0 Signature: Print Name: Mailing Address: ENT: City Date: y Telephone: 2o(. *2-5-0 3d , State Zip H:Upplications\Forms-Applications On Line t2011 Applications\Plumbing Permit Application Revised 8-9-1I.docx Revised: August 2011 bh Page 2 of 2 DESCRIPTIONS I ACCOUNT I QUANTITY PermitTRAK I PAID $164.58' PG14-0187 Address: 9725 E MARGINAL WAY S BLDG 9-101 Apn: 0003400018 $164.58 PLUMBING $158.25 PERMIT ISSUANCE BASE FEE R000.322.100.00.00 0.00 $32.50 PERMIT FEE R000.322.100.00.00 0.00 $94.10 PLAN CHECK FEE R000.322.103.00.00 0.00 $31.65 TECHNOLOGY FEE $6.33 TECHNOLOGY FEE TOTAL FEES PAID BY RECEIPT: R3772 R000.322.900.04.00 0.00 $6.33 $164.58 Date Paid: Monday, December 15, 2014 Paid By: HOLADAY PARKS FAB INC Pay Method: CREDIT CARD 04574G Printed: Monday, December 15, 2014 4:02 PM 1 of 1 CRWSYSTEMS INSPECTION RECORD Retain a copy with permit INSPECTION NO. PERMIT NO. CITY OF TUKWILA BUILDING DIVISION 6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431-3670 Permit Inspection Request Line (206) 438-9350 itl11—o(tl Pr��'ect; ec (30,9f 4 -(c��i� Type of spection: et,( f �!'' Address: t /72S-E,��yl( (waylc. Date Called: Special Instructions: / Pr 4t5c4r, t6Lk12r L5e r e Date Wanted: s a,m. p,rrs. Reque ter: c Phone Il�o: G _ 7c,7 65-1 r (Ici Approved per applicable codes. COMMENTS: Corrections required prior to approval. /tritic/-evi 0 L t,„A Inspector: REINSPECTION FEE REQUIRED. Prior to next inspection. fee must be paid at 6300 Southcenter Blvd.. Suite 100. Call to schedule reinspection. c 4600 S. 134th Place PO Box 69208 Seattle, WA 98168 HtlLADAY-PAR►LS,INC Phone: (206) 248-9700 Fax: (206) 248-8700 BACKFLOW PREVENTION ASSEMBLY TEST REPORT ACCOUNT # NAME OF PREMISE (3�� d /b SERVICE ADDRESS 497 Z4-- f /*<1 C.i# J CITY 7 - el ZIP CONTACT PERSON PHONE ( ) FAX ( ) LOCATION OF ASSEMBLY?-0- �/%d V/!� 441511" i'�� P11 ,40„i-vf DOWNSTREAM PROCESS 170OU /4.)6K DCVA 0 RPBA 0--" BA 0 OTHER NEW INSTALL ❑ EXISTING ID-1 EPLACEMENT ❑ OLD SER. # MAKE OF ASSEMBLY k)47Ts MODEL deg SERIAL NO. 7 �gs� SIZE �//2 Commercial Cc -Residential 0 PROPER INSTALLATION? YES Ca'g0 ❑ INITIAL TEST PASSED I FAILED ■ DCVA / RPBA DCVA / RPBA RPBA PSID PVBA/SVBA CHECK VALVE NO.1 CHECK VALVE NO.2 OPENED AT 2-a AIR INLET OPENED AT PSID LEAKED • d-T PSID LEAKED • 7 D PSID #1 CHECK 1 Z- PSID DID NOT OPEN •■ AIR GAP OK? ird NEW PARTS AND REPAIRS CLEAN REPLACE PART CLEAN REPLACE PART CLEAN REPLACE PART CHECK VALVE HELD AT PSID • • • II MI • • • LEAKED ■ . . • • CLEANED ■ REPAIRED ■ TEST AFTER REPAIRS PSID PSID OPENED AT PSID AIR INLET PSID LEAKED • LEAKED • #1 CHECK PSID CHK VALVE PSID PASSED ■ FAILED ■ AIR GAP INSPECTION: Required minimum air gap separation provided? Yes` No 0 Detector Meter Reading REMARKS: LINE PRESSURE PSI TESTERS SIGNATURE WSDOH APPROVED DEVICE? YES L"fN0 L7 CERT. NO. B4857 CONFINED SPACE? DATE /Z ` 3f '/ TESTERS NAME PRINTED: Willian4'Whitfield TESTERS PHONE # ( 206 ) 248-8705 REPAIRED BY: DATE FINAL TEST BY: CERT. NO. DATE CALIBRATION DATE 07 /15 /14 GAUGE # 05082538 MODEL 835 SERVICE RESTORED? YES CJ NO ❑ 1 certify that this report is accurate, and I have used WAC 246-290-490 approved test methods and test equipment. PIE COPY ES-009 For Health Hazard Applications Job Name Contractor Job Location Approval Engineer Contractor's P.O. No Approval Representative RECEIVED CITY OF TUKWILA Series 009 Reduced Pressure Zone Assemblies RECE!VEr, , DEC 16 2014. TUKVYIIL+ PUBLIC WORKS Sizes: 1/4" - 2" Series 009 Reduced Pressure Zone Assemblies are designed to protect potable water supplies in accordance with national plumbing codes and water authority requirements. This series is designed to protect drinking water supplies from dangerous cross -connections in accordance with national plumbing codes and water authority requirements for non -potable service appli- cations such as irrigation, fireline, or industrial processing. This series features two in -line, independent check valves, cap- tured springs and replaceable check seats with an intermediate relief valve. Its compact modular design facilitates easy main- tenance and assembly access. Sizes'/4" — 1" shutoffs have tee handles. Features • Single access cover and modular check construction for ease of maintenance • Top entry - all internals immediately accessible • Captured springs for safe rnaintenan • Internal relief valve for reduced install • Replaceable seats for economical re • Bronze body construction for durabili • Ball valve test cocks — screwdriver s • Large body passages provides low p • Compact, space saving design • No special tools required for servicin Specifications A Reduced Pressure Zone Assembly shall be installed at each potential health hazard location to prevent backflow due to backsiphonage and/or backpressure. The assembly shall consist of an internal pressure differential relief valve located in a zone between two positive seating check modules with captured springs and silicone seat discs. Seats and seat discs shall be replaceable in both check modules and the relief valve. There shall be no threads or screws in the waterway exposed to line fluids. Service of all internal components shall be through a single access bronze cover secured with stainless steel bolts. The assembly shall also include two resilient seated isolation valves, four resilient seated test cocks and an air gap drain fit- ting. The assembly shall meet the requirements of: USC; ASSE Std. 1013; AWWA Std. C511-92; CSA B64.4. Shall be a Watts Series 009. tDoes not indicate approval status. Refer to Page 2 for approved sizes & models. Test Cock No 3 Ball Type Test Cocks e REVIEWED FOR N tioreICOMPLIANCE air APPROVED M /4 _2" A ted 1/ °DEC 18 2014 essure drop City of Tukwila BUILDING DIVISION t Cock 2 t Check dule embly Zone ief Valve Assembly EC 1 5 2014 PERMIT CENTER 009M2QT Test Cock No. 4 Second Check Module Assembly Water Outlet Now Available WattsBox Insulated Enclosures. For more information, send for literature ES-WB. NOTICE Inquire with governing authorities for local installation requirements Watts product specifications in U.S. W customary ever and h are geior tem and are uct delied for , reference only. For precise measurements,mwi please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, spec cations, or materials with- out poor notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold. Available Models:1/4r' - 2" Suffix: QT - quarter -turn ball valves S - bronze strainer LF - without shutoff valves AQT - elbow fittings for 360° rotation 3/4" - 2" only PC - internal Polymer Coating SH - stainless steel ball valve handles HC - 2' " inlet/outlet fire hydrant fitting (2" valve) Prefix: C - clean and check strainer 3/4" - 1" only U - union connections (see ES-U009) Materials: 1/4" - 2" Bronze body construction, silicone rubber disc material in the first and second check plus the relief valve. Replaceable poly- mer check seats for first and second checks. Removable stain- less steel relief valve seat. Stainless steel cover bolts. Standardly furnished with NPT body connections. For optional bronze union inlet and outlet connections, specify prefix U (1" - 2"). Series 009QT furnished with quarter turn, full port, resilient seated, bronze ball valve shutoffs. Air Gaps and Elbows Pressure / Temperature Series 0091/4" - 2" Suitable for supply pressure up to 175psi (12.1 bar). Water temperature: 33°F - 180°F (0.5°C - 75°C). Standards USC ASSE No. 1013 AWWA C511-92 CSA B64.4 IAPMO File No. 1563. tDoes not indicate approval status. See below for approved models. SP Approvals ASSE, AWWA, CSA, IAPM0 Approved by the Foundation for Cross -Connection Control and Hydraulic Research at the University of Southern California. UL Classified 3/4" - 2" (LF models only except 009M3LF) MODEL for 909, 009 and 993 sizes DRAIN OUTLET in. mm A in. DIMENSIONS mm in. B mm WEIGHT lbs. kgs. 909AGA %4"-'/z" 009, 3/4" 009M2/M3 /z 13 2' 60 31/4 79 0.625 0.28 909AGC 3/4"-1" 009/909, 1 "-1'/z" 009M2 1 25 3'/ 83 4' 124 1.5 0.68 909AGF 11/2"-2" 009M1, 1%4"-3" 009/909, 2" 009M2, 4"-6" 993 2 51 4% 111 6% 171 3.25 1.47 909AGK 4" -6" 909, 8"-10" 909M1 3 76 63 162 95 244 6.25 2.83 909AGM rr_• 8"-10" 909 4 102 73 187 11 % 286 15.5 7.03 90$ELA. N-' 2 009,, 44" 009 /M3 - i - ft - _„ .. .-j - - - - 909ELC `Vr. 1'°'.009/909 - * ! 2% 60 irk 2% 60 0.38 0.17 * 909ELF rii 11/4" 2u.'009M1, _. 1'/4'-24009/909 �' " ,?009M2,'4 =,}" - ' 'O R'. 'i 3% ` ' -e• 92 ' 33/ 92 2 0.91 * 909ELH Vertical �9.'93 2'/z"-3" 009/90J - - r =, - , - - - - A A B * Epoxy coated 4 Dimensions and Weight: IA" - 2" 009 0091/4" - 2" SIZE in. in. A mm in. 6 mm in. DIMENSIONS C mm (APPROX.) D in. mm in. L mm in. STRAINER DIMENSIONS M mm N in. mm WEIGHT lbs. kgs. 1/4 10 250 45 117 33/8 86 11/4 32 512 140 23/8 60 21/2 64 5 2 3/e 10 250 45/8 117 33/8 86 11/4 32 51/2 140 23/8 60 21 64 5 2 /2 10 250 4 % 117 33/8 86 11/4 32 51/2 140 23/4 70 21/4 57 5 2 3/4 103/4 273 5 127 31/2 89 11/2 38 614 171 33/46 81 23/4 70 6 3 1 14' 368 5' 140 3 76 212 64 91/2 241 33/4 95 3 76 12 5 11/4 173/8 441 6 150 31/2 89 2' 64 113/8 289 47/i6 113 31/2 89 15 6 1' 177/8 454 6 150 31/2 89 21/2 64 111/8 283 4'/8 124 4 102 16 7 2 213 543 73/4 197 41/2 114 31/4 83 13' 343 513/46 151 5 127 30 13 Suffix HC — Fire Hydrant Fittings dimension `A' = 25" kPa psi 207 30 172 25 138 20 103 15 69 10 35 5 0 0 AP Capacity Performance as established by an independent testing laboratory."Typical maximum system flow rate (7.5 feet/sec., 2.3 meters/sec.) kPa psi 138 20 117 17 96 14 76 1 55 8 35 5 pp 0 0 '/a" 009QT kPa psi 138 20 117 17 96 14 76 11 55 8 35 5 AP 0 0 .25 .60 .75 1.17 gpm .95 1.9 2.9 3 8 4.5 Ipm 3/" 009QT • kPa psi 172 25 138 20 103 15 69 10 35 5 AP O kPa psi 207 30 165 24 124 18 83 12 41 6 0 0 .25 .50 .75 1.25 1.50 2.5 3. gpm .95 1.9 2.9 3 8 4.8 5.7 9.4 11.8 Ipm '/" 009QT * 2.5 5 7 5 10 12.5 15 gpm 3 8 9 5 19 28.5 38 47.5 57 Ipm 5 7.5 15 fps 1.5 2.3 4.6 mps * 3/4 ' 009M3QT 0 2 6 10 14 18 22 26 30 34 38 42 46 gpm AP 0 7.6 23 38 53 68 84 99 114 129 144 160 175 Ipm 7.5 15 fps 2.3 4.6 mps * 1 " 009M2QT 5 10 20 30 40 50 60 70 80 gpm 19 38 76 114 152 190 228 266 304 Ipm 7.5 15 fps 2.3 4.6 mps WWATFS® kPa psi 172 25 138 20 103 15 69 10 35 5 0 0 pp 0 0 1'/a" 009M2QT kPa psi 207 30 172 25 138 20 103 15 69 10 35 5 0 0 AP 0 0 10 20 30 40 50 60 70 80 gpm 38 76 114 152 190 228 266 304 Ipm 5 7.5 10 15 fps 1.5 2.3 3.0 4.6 mps 1 %" 009M2QT * psi 207 30 172 25 138 20 103 15 69 10 35 5 0 0 AP 10 20 30 40 50 60 70 80 90 100 110 120 gpm 38 76 1 4 152 190 228 266 304 342 380 418 456 Ipm 5 7.5 10 15 fps 1.5 2.3 3.0 4.6 mps 2" 009M2QT * 20 40 60 80 100 120 140 160 180 200 gpm 76 152 228 304 380 456 532 608 684 760 Ipm 5 7.5 10 15 fps 1.5 2.3 3.0 4.6 mps �eU1lD/ryC CERTIFIED A Watts Water Technologies Company USA: Tel: (978) 688-1811 • Fax: (978) 794-1848 • www.watts.com Canada: Tel: (905) 332-4090 • Fax: (905) 332-7068 • www.watts.ca ES-009 1318 © 2013 Watts City of Tukwila Department of Community Development 7/1/2015 CONNIE HARDIN 4600 S 134 PL SEATTLE, WA 98168 RE: Permit No. PG14-0187 BOEING #9-101 9725 EAST MARGINAL WY S Dear Permit Holder: Jim Haggerton, Mayor Jack Pace, Director In reviewing our current records, the above noted permit has not received a final inspection by the City of Tukwila Building Division. Per the International Building Code, International Mechanical Code, Uniform Plumbing Code and/or the National Electric Code, every permit issued by the Building Division under the provisions of these codes shall expire by limitation and become null and void if the building or work authorized by such permit has not begun within 180 days from the issuance date of such permit, or if the building or work authorized by such permit is suspended or abandoned at any time after the work has begun for a period of 180 days. Your permit will expire on 8/12/2015. Based on the above, you are hereby advised to: 1) Call the City of Tukwila Inspection Request Line at 206-438-9350 to schedule for the next or final inspection. Each inspection creates a new 180 day period, provided the inspection shows progress. -or- 2) Submit a written request for permit extension to the Permit Center at least seven(7) days before it is due to expire. Address your extension request to the Building Official and state your reason(s) for the need to extend your permit. The Building Code does allow the Building Official to approve one extension of up to 180 days. If it is determined that your extension request is granted, you will be notified by mail. In the event you do not call for an inspection and/or receive an extension prior to 8/12/2015, your permit will become null and void and any further work on the project will require a new permit and associated fees. Thank you for your cooperation in this matter. Sincerely, Bill Rambo Permit Technician File No: PG14-0187 6300 Southcenter Boulevard Suite #100 • Tukwila, Washington 98188 • Phone 206-431-3670 • Fax 206-431-3665 Joanna Spencer From: Connie Hardin <connieh@holadayparks.com> Sent: Thursday, December 18, 2014 10:25 AM To: Joanna Spencer Subject: FW: Boeing @ 9725 E Marginal Way S, Permit PG14-0187 Hi Joanna. See my project manager's response below. Let me know if you need anything else. Thanks. Connie From: Derek Hart Sent: Wednesday, December 17, 2014 12:53 PM To: Connie Hardin; Pat Klein Subject: RE: Boeing @ 9725 E Marginal Way S, Permit PG14-0187 The project is located on the 1st floor, in a high bay room. The RP will be located in a mechanical mezzanine next to the high bay room(shown just on the edge of the prints). There is no existing backflow preventer in this area that we know of. RP was not mentioned in any of the construction notes because it was missed by the design team. Installation of backflow preventer is a late addition to this project. Backflow preventer is being installed so as to provide make-up water to steam humidifier in new air handling unit. Derek Hart, Project Manager HOLADAY-PARKS, INC. 206.248.9700 main 425.269.2447 cell derekh@holadayparks.com HOLADAYPARKS.com From: Connie Hardin Sent: Wednesday, December 17, 2014 12:44 PM To: Derek Hart; Pat Klein Subject: FW: Boeing @ 9725 E Marginal Way S, Permit PG14-0187 Hi guys. Need some clarification for the city. See below. Connie From: Joanna Spencer[mailto:Joanna.Spencer@TukwilaWA.gov] Sent: Wednesday, December 17, 2014 10:55 AM To: Connie Hardin Cc: Joanna Spencer Subject: Boeing @ 9725 E Marginal Way S, Permit PG14-0187 PERMANENT FILE COPY P6 3 - 0 1137 1 Connie, Please clarify. Application calls for adding one backflow preventer 3/4" 009 Watts. Where will this backflow be installed? A note in the box states on sht 1M117 states Backflow Located Col J-10 2nd floor Rm M3J10. Does it means that there is an existing backflow on the 2nd floor already? Plan that was submitted is for the 1st floor, however backflow installation is not mentioned in any of the construction notes. Joanna Spencer Development Engineer City of Tukwila Public Works Department ph:(206) 431-2440 fax:(206) 431-3665 Joanna.Spencer@TukwilaWA.gov The City of opportunity, the community of choice. 2 PERMIT COORD COPY PLAN REVIEW/ROUTING SLIP PERMIT NUMBER: PG14-0187 DATE: 12/15/14 PROJECT NAME: BOEING #9-101 SITE ADDRESS: 9725 EAST MARGINAL WY S X Original Plan Submittal Response to Correction Letter # Revision # Revision # before Permit Issued after Permit Issued DEPARTMENTS: uilding Division El AWQ Public Works ill Fire Prevention Structural n Planning Division Permit Coordinator PRELIMINARY REVIEW: Not Applicable (no approval/review required) DATE: 12/16/14 Structural Review Required REVIEWER'S INITIALS: DATE: APPROVALS OR CORRECTIONS: Approved Approved with Conditions Corrections Required (corrections entered in Reviews) Denied (ie: Zoning Issues) DUE DATE: 01/13/15 Notation: REVIEWER'S INITIALS: DATE: Permit Center Use Only CORRECTION LETTER MAILED: Departments issued corrections: Bldg ❑ Fire ❑ Ping ❑ PW ❑ Staff Initials: 12/18/2013 HOLADAY PARKS INC Page 1 of 4 4.4 Washington State Debartinnent of Labor & Industries HOLADAY PARKS INC Owner or tradesperson PARKS, GERALD T JR Principals PARKS, GERALD T JR, PRESIDENT NAILON, JUNE ANNETTE, VICE PRESIDENT O'CONNOR, BONNY K, SECRETARY BECK, DAVID CLARENCE, TREASURER VAN DER VEEN, ERIC M, VICE PRESIDENT (End: 08/14/2013) PIZZEY, GRACE KATHERINE, VICE PRESIDENT (End: 08/14/2013) VAN DER VEEN, JULIE ELIZABETH, MEMBER (End: 08/14/2013) CONNELL, DANIEL AARON, MEMBER (End: 08/14/2013) GIRI, BUIT, MEMBER (End: 08/14/2013) KIEL, RINALD HOWARD, MEMBER (End: 08/14/2013) WHITMYRE, CHRISTIAN, MEMBER (End: 08/14/2013) NELSON, MICHAEL, SECRETARY (End: 11/04/2010) PARKS, DAVID L, TREASURER (End: 11/04/2010) TALBOT, PAUL, TREASURER (End: 11/04/2010) Doing business as HOLADAY PARKS INC WA UBI No. 578 004 089 4600 S 134TH PL SEATTLE, WA 98168 206-248-9700 KING County Business type Corporation License Verify the contractor's active registration / license / certification (depending on trade) and any past violations. https://secure.lni.wa.gov/verify/Detail.aspx?UBI=578004089&LIC=HOLADPI379N0&SAW= 12/19/2014