HomeMy WebLinkAboutPermit S11-066 - QUALITY SEWING & VACUUM - FREESTANDING SIGNSQUALITY SEWING & VACUUM
1203 ANDOVER PARK W
S11-066
2 FREESTANDING SIGNS
Parcel No.:
Address:
Suite No:
City of .. ukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206-431-3670
Inspection Request Line: 206-431-2451
Web site: http:fiwww.Tukwila WA.gov
REFACE OR COPY CHANGE SIGN PERMIT
3523049092
1203 ANDOVER PK W TUKW
Applicant/Business:
Permit Number:
Issue Date:
Permit Expires On:
S11-066
07/13/2011
01/09/2012
Property Owner:
Name:
Address:
WACO ENTERPRISE
PO BOX 88216 , TUKWILA WA 98138
Contact Person:
Name: PAUL LAPONTE
Address: 1205 ANDOVER PK W , TUKWILA WA 98188
Contractor:
Name: OWNER AFFIDAVIT
Address:
Phone: 206-714-0955
Phone:
DESCRIPTION OF WORK:
REFACE EXISTING FREESTANDING SIGN FOR "SEWING & VACUUM OUTLET." EXISTING SIGN IS NON -CONFORMING,
WILL BE UNDER 10 YEAR GRACE PERIOD.
Fees Collected: $212.00
Electricity Provided by: ??
Date of last sign permit issued by the City
for sign that is being modified:
Existing sign area:
Proposed sign area:
Sign height:
Distance from closest edge
of sign to property lines:
Zoning: TUC
Freestanding Sign # 1
01/01/2007
19 square feet
19 square feet
9 feet 3 inches
16 feet
Sign Type: REFACE
Freestanding Sign #2
0 square feet
0 square feet
0 feet 0 inches
0 feet
Planning Division Authorized Signature:
Date: 7//
I hereby certify that I have read and examined this permit and know the same to be true and correct. All provisions of law and ordinances
governing this work will be complied with, whether specified herein or not.
THIS PERMIT SHALL BECOME NULL AND VOID IF THE WORK IS NOT COMMENCED WITHIN 180 DAYS FROM THE DATE OF
ISSUANCE, OR IF THE WORK IS SUSPENDED OR ABANDONED FOR A PERIOD OF 180 DAYS FROM THE LAST INSPECTION.
'o schedule a final inspection for your sign, please call the inspection request line at 206-431-2451. Enter Inspection Code 1510
i'orsign final inspection. Please allow up to 5 business days for your inspection.
FINAL INSPECTION APPROVAL: DATE:
doc: SIGN-REFAC
S11-066
Printed: 07-13-2011
File No.
Name of Tenant:
Sign Address:
Date Photo Taken:
SITE INSPECTION (PLANNING)
S11-066
Quality Sewing & Vacuum
1203 Andover Park W
8/10/2011
x Sign appears to conform to permit application
Sign appears different from permit application
Sign not installed as of XX/XX/200X
Make new site visit and take photo by XX/XX/200X
Comments: Sign inspected and final approval granted. JMW 08-10-201 1
City of Tukwila Jim Haggerton, Mayor•
Department of Community Development Jack Pace, Director•
July 1, 2011
Paul LaFonte
Quality Sewing and Vacuum
1203 Andover Park W
Tukwila, WA 98188
Dear Sign Permit Applicant,
The City of Tukwila recently received your permit application for a permanent freestanding (monument)
sign for Quality Sewing & Vaccum at 1203 Andover Park West. Your application was incomplete. Please
either provide a valid Washington State Contractor's licence for the contractor who will perform the
installation, or complete the enclosed affidavit form and return it to our office at 6300 Southcenter Blvd,
Ste 100, Tukwila, WA 98188. We will continue processing your application when we receive the
required documents.
If you have any questions about this requirement, please call me at 206-431-2164 or e-mail me at the
address below.
Sincerel
Jon Morrison Winters
Department of Community Development
City of Tukwila
Jonathon.Winters@TukwilaWA.gov
6300 Southcenter Boulevard, Suite #100 • Tukwila, Washington 98188 • Phone 206-431-3670 • Fax 206-431-3665
CITY OF TUKWILA
Department of Community Development
630o Southcenter Boulevard, Tukwila, WA 98188
Telephone: (206) 431 367o FAX (206) 431-3665
E-mail: tukplanaci.tukwila.wa.us
Permit Center/Building Division
206 431-367o
Public Works Department
206 433-0179
Planning Division
206 431-367o
AFFIDAVIT IN LIEU OF CONTRACTOR REGISTRATION
PERMIT NO: $ /% ®%6
STATE OF WASHINGTON)
) ss.
COUNTY OF KING )
cd# 74c,ct-e.
[please print name]
, states as follows:
i. I have made application for a permit from the City of Tukwila, Washington.
2. I understand that state law requires that all building construction contractors be registered with the
State of Washington. The exceptions to this requirement are stated under Section 18.27.090 of the
Revised Code of Washington, a copy of which is printed on the reverse side of this Affidavit. I have
read or am familiar with RCW 18.27.09o.
3. I understand that prior to issuance of a permit for work which is to be done by any contractor, the
City of Tukwila must verify either that the contractor is registered by the State of Washington, or that
one of the exemptions stated under RCW 18.27.090 applies.
4. In order to provide verification to the City of Tukwila of my compliance with this requirement, I
hereby attest that after reading the exemptions from the registration requirement of RCW 18.27.090,
I consider the work authorized under this permit to be exempt under number _, and will therefore
not be performed by a registered contractor.
5. I understand that the licensing provision of RCW 19.28.161 through 19.28.271 shall not apply to
persons making electrical installations on their own property or to regularly employed employees
working on the premises of their employer. The proposed electrical work is not for the construction
of a new building for rent, sale or lease.
I understand that I may be waiving certain rights that I might otherwise have under state law in any decision
to engage an unregistered contractor to perform construction work.
Owner/Owner's Agent
Signed and sworn to before me this
`Ch
�I') day of
fl ' V ' i,a`
,2011
NOTARY PUBLIC in and for the State of hshington
Residing at CO V Ur•
Name as commissioned:
My commission expires:
, County
18.27.090 Exemptions. The rt .ration provisions of this chapter do not app;,
i. An authorized representative of the United States
government, the state of Washington, or any incorporated
city, town, county, township, irrigation district, reclamation
district, or other municipal or political corporation or
subdivision of this state;
2. Officers of a court when they are acting within the scope
of their office;
3. Public utilities operating under the regulations of the
utilities and transportation commission in construction,
maintenance, or development work incidental to their own
business;
4. Any construction, repair, or operation incidental to the
discovering or producing of petroleum or gas, or the
drilling, testing, abandoning, or other operation of any
petroleum or gas well or any surface or underground mine
or mineral deposit when performed by an owner or lessee;
5. The sale of any finished products, materials, or articles of
merchandise that are not fabricated into and do not become
a part of a structure under the common law of fixtures;
6. Any construction, alteration, improvement, or repair of
personal property performed by the registered or legal
owner, or by a mobile/manufactured home retail dealer or
manufacturer licensed under chapter 46.7o RCW who shall
warranty service and repairs under chapter 46.7o RCW;
7. Any construction, alteration, improvement, or repair
carried on within the limits and boundaries of any site or
reservation under the legal jurisdiction of the federal
government;
8. Any person who only furnished materials, supplies, or
equipment without fabricating them into, or consuming
them in the performance of, the work of the contractor;
9. Any work or operation on one undertaking or project by
one or more contracts, the aggregate contract price of
which for labor and materials and all other items is less
than five hundred dollars, such work or operations being
considered as of a casual, minor, or inconsequential nature.
The exemption prescribed in this subsection does not apply
in any instance wherein the work or construction is only a
part of a larger or major operation, whether undertaken by
the same or a different contractor, or in which a division of
the operation is made into contracts of amounts less than
five hundred dollars for the purpose of evasion of this
chapter or otherwise. The exemption prescribed in this
subsection does not apply to a person who advertises or
puts out any sign or card or other device which might
indicate to the public that he or she is a contractor, or that
he or she is qualified to engage in the business of
contractor;
io. Any construction or operation incidental to the
construction and repair of irrigation and drainage ditches
of regularly constituted irrigation districts or reclamation
districts; or to farming, dairying, agriculture, viticulture,
horticulture, or stock or poultry raising; or to clearing or
other work upon land in rural districts for fire prevention
purposes; except when any of the above work is performed
by a registered contractor;
11. An owner* who contracts for a project with a registered
contractor, except that this exemption shall not deprive the
owner of the protections of this chapter against registered
and unregistered contractors. The exemption prescribed in
this subsection does not apply to a person who performs
the activities of a contractor for the purpose of leasing or
selling improved property he or she has owned for less than
twelve months;
12.* Any person working on his or her own property,
whether occupied by him or her or not, and any person
working on his or her personal residence, whether owned
by him or her or not but this exemption shall not apply to
any person who performs the activities of a contractor on
his or her own property for the purpose of selling,
demolishing, or leasing the property;
13. An owner* who performs maintenance, repair, and
alteration work in or upon his or her own properties, or
who uses his or her own employees to do such work;
14. A licensed architect or civil or professional engineer
acting solely in his or her professional capacity, an
electrician certified under the laws of the state of
Washington, or a plumber certified under the laws of the
state of Washington or licensed by a political subdivision of
the state of Washington while operating within the
boundaries of such political subdivision. The exemption
provided in this subsection is applicable only when the
person certified is operating within the scope of his or her
certification;
15. Any person who engages in the activities herein
regulated as an employee of a registered contractor with
wages as his or her sole compensation or as an employee
with wages as his or her sole compensation;
16. Contractors on highway projects who have been
prequalified as required by RCW 47.28.070, with the
department of transportation to perform highway
construction, reconstruction, or maintenance work;
17. A mobile/manufactured home dealer or manufacturer
who subcontracts the installation, set-up, or repair work to
actively registered contractors. This exemption only applies
to the installation, set-up, or repair of the
mobile/manufactured homes that were manufactured or
sold by the mobile/manufactured home dealer or
manufacturer;
18. An entity who holds a valid electrical contractor's
license under chapter 19.28 RCW that employs a certified
journeyman electrician, a certified residential specialty
electrician, or an electrical trainee meeting the
requirements of chapter 19.28 RCW to perform plumbing
work that is incidentally, directly, and immediately
appropriate to the like -in -kind replacement of a household
appliance or other small household utilization equipment
that requires limited electric power and limited waste
and/or water connections. An electrical trainee must be
supervised by a certified electrician while performing
plumbing work.
• Per Washington State Department of Labor and Industries, lessee has been
interpreted to be equivalent to owner for the purpose of these exemptions.
RECEIVED
ljuN 2 8 20111
COMMUNITY
DEVELOPMENT
CITY OF TUKWILA
Department of Community Development
6300 Southcenter Boulevard, Tukwila, WA 98188
Telephone: (206) 431-3670 FAX (206) 431-3665
E-mail: tukplan@ci.tukwila.wa.us
PERMANENT
FREESTANDING
SIGNS
PERMANENT SIGN PERMIT APPLICATION
FOR STAFF USE ONLY Permits Plus Type: P-SIFREE
Planner:
File Number: 51 (' d Lo co
Needs Electrical: Yes/No
Associated File Numbers:
a?i4/1 r St',,s,06
Business Name
a(4 Vet Ai tr'
Applicant/Contact 1
Contractor
63 r4./PDLitt pp 4 to
Address of Sign
.2,c6."-- 77/ •790
Phone
oe2c iDOv1pgL . S.7ry 61s _
Address, City, State, Zip e Phone
Address, City, State, Zip
Phone
I HEREBY CERTIFY that the information contained in this application and the materials furnished to the City by me are true. I
understand that if I provide incorrect information on this application or submit plans that are not correct, it could delay issuance
of a permit or, if the permit has been issued, be cause for the City to revoke the sign permit.
1•).7 ri I g /-- g pc/lea/All j' ���4t et
Date: Si n ture of Own Authorized A ent il
The City will send any official notices, letters, and other official notices via email. If you wish to receive all official
communications from the City via US Postal Mail, check here: ❑
CHECKLIST
Completed and signed application (this form).
O Three copies of a dimensioned and scaled site plan'
showing property lines, streets, buildings and
parking areas; the location of all existing
freestandinig signs on the premise and proposed
location for any new freestanding sign(s).
O Method of illumination, if proposed.
O Scaled and dimensioned footing designs and height
calculations. Footing designs are not required for
reface or copy changes to an existing freestanding
sign, provided there is no change in the sign
height, area or location.
At Structural calculations if the sign has an area
greater than 50 square feet and/or is taller than 15
feet. This requirement may be waived for certain
refaces or copy changes to existing freestanding
signs.
API Application fee listed in current fee schedule.
O One copy of a valid Washington State Contractor's
license or owner's affidavit.
O Tukwila business license number for the sign
contractor, if applicable:
TOTAL NUMBER OF SIGNS
Total number of signs included in this application:
Section 1
Section 3
Section 2
Section 4
General Information about Property
Total Length of Street Frontage Along All Streets:
Does the site front on more than one street, but have
less than 800 feet of linear frontage, combined on
both streets?
A) 0
Is the site use a multi family or institutional use in a
residential zone (LDR, MDR, or HDR)?
0
Freestandin ' Si • n Worksheet
A sign permit is required for the installation of a new freestanding sign. In most circumstances the City only allows new
freestanding signs to be monument style signs. Certain large premises that have gone through the Master Sign Program are
eligible for grand monument signs. Information on installing a new freestanding sign is found in SECTION 1 of this
application. Information on installing new grand monument signs can be found in SECTION 2 of this application.
A sign permit is also required for any proposed reface or copy change to an existing freestanding sign in the City. In some
cases a reface or copy change of an existing freestanding sign requires that the sign be removed. Information on completing a
reface or doing a copy change to an existing freestanding sign can be found under SECTION 3 of this application.
Section 1- New Freestanding Si . ns
Freestanding Signs in Commercial/Industrial Zones
Each premise is permitted to have one freestanding -monument style sign. Additional monument signs are permitted based on
the total amount of linear street frontage along the premise. Table 1 below outlines the development standards and total number
of signs permitted for most premises.
Total
ROW of
Premise
Allowable Sign
Message Area
Total Allowable
Sign Size2
Maximum
Height
Number of Signs
Less than
400 feet
36 square feet per
side/72 square feet total
54 square feet per
side/108 square feet
total
6 feet
One
400-599
feet
' 50 square feet per
side/100 square feet
total
70 square feet per
side/140 square feet
total
7 feet
One
600-799
feet
: 60 square feet per
side/120 square feet
total
80 square feet per
side/160 square feet
total
7 feet
One
800-999
feet
66 square feet per
side/132 square feet
1 total
88 square feet per
side/176 square feet
total
8 feet
Two
1,000 feet
and over
72 square feet per
side/144 square feet
total
96 square feet per
side/192 square feet
total
8 feet
One for every 400 feet of
linear street frontage.
Corner Properties
Some corner properties may qualify for more than one monument sign, even if they have a limited amount of street frontage. A
property that borders on more than one public street, but has less than 800 total feet of linear frontage, is permitted to have one
monument sign per street if the following criteria are met:
1. The property has a least 200 feet of frontage on each public street where a sign will be placed;
2. Each public street provides direct access to the property; and
3. For each separate street frontage Table 1 listed above shall be used to determine the design standards for any proposed
monument sign.
General Requirements for Monument Signs in Commercial and Industrial Zones
1. Setback. All monument signs shall be placed at a minimum of five feet from all property lines; however no sign taller
than three feet shall be placed within the sight distance triangle, unless it can be demonstrated the sign will not pose a
safety risk by reducing visibility for motorists turning out into traffic.
2. Maximum Width. The maximum width permitted for any new monument sign is 15 feet,
3. Address Requirement. All new freestanding signs shall have the address number or address range of the premise
listed on the structure. The address shall not be counted toward the allowable sign message area limit. Address
numbers must be plainly legible and visible from the street fronting the property. The address numbers must contrast
with the sign background. Address numbers shall be Arabic numerals or alphabet letters. Numbers shall be a
minimum of four inches high with a minimum stroke width of 1.5 inches.
The allowable message area is either the face pane of the sign, or for channel letters or signs painted on seating or retaining walls, that portion of the sign devoted to
the actual message , logo, or business name.
2 Total size is the entire area of the sign, including the support structure.
Table 1, Monument Sign Details, Commercial/Industrial Zones
Monument
Sign 1
Monument
Sign 2
Monument
Sign 3
Monument
Sign 4
Monument
Sign 5
Monument
Sign 6
Name of Street
on which sign
will be placed?
Total Sign
message area
per face.
Total Sign
message area
per sign.
Total Sign Size
per face
Total Sign Size
per sign.
' Width of Sign
Sign Height
(feet -inches)
Distance from
closest edge of
sign to
property lines
(in feet)
Freestanding Signs in Residential Zones
Institutional uses and multi -family complexes are allowed to have one monument sign for each public street that provides
access to the premises. The following are the specific development standards that apply to the installation of monument signs in
residential zones:
1. The area of the monument sign is limited to 30 square feet per sign face and a total of 60 square feet for all sides;
2. The sign may be up to five feet tall;
3. Maximum width of the sign shall not exceed 15 feet;
4. Location of the sign shall not interfere with sight distance of vehicles pulling in and out of the premises;
5. The sign must be located in a landscaped area. Having the sign stand-alone in a parking lot is not permitted; and
6. The sign may only use indirect lighting methods except for dynamic displays. The lighting must have no spill -over
impact on adjacent properties.
Dynamic Signs in Residential Zones
In order to foster civic community outreach and communication, the City permits limited use of dynamic signs within
residential zones. One permitted monument sign per premise, as outlined above, may contain a dynamic feature. The following
are the specific development standards applicable to the installation of dynamic signs within residential zones:
1. The image of the sign may not change more frequency than once every ten seconds;
2. The image must appear and disappear as one image. The image may not appear to flash, undulate, pulse or portray
explosions, fireworks, flashes of light, or blinking or chasing lights, or appear to move toward or away from the viewer,
expand, contract, bounce, rotate, spin, twist, scroll, travel or otherwise portray movement.
3. Illumination of the dynamic sign is limited to the hours of 7AM to 10PM.
4. All signs shall have installed ambient light monitors, and shall at all times allow such monitors to automatically adjust
the brightness level of the electronic sign based on ambient light conditions. Maximum brightness levels for electronic
signs shall not exceed 3-foot candle above ambient light conditions, measured 100 feet from the face.
Tabe2, Monument Sign Details, Residential Zones
i
Monument
Sign 1
Monument
Sign 2
Monument
Sign 3
Monument
Sign 4
Name of Street
in which sign
will be placed
along?
Total Area of
Sign.
Sign Height
(feet -inches)
Width of Sign.
Will the sign
have a
Dynamic
Display?
Section 2- Grand Monument Signs
Premises that have an approved Master Sign Program are eligible to install two grand monument signs. A grand monument
sign takes the place of one of the monument signs permitted in section 1 of this application. The design of the grand monument
sign shall have an architectural treatment that is consistent with the design of the building or buildings on premise in which the
sign will be located.
Before you fill out this section you should first see if the premise you are applying for has an approved Master Sign Program. If
not, your first step is to submit a master sign permit application. The City will not issue a permit for a grand monument sign
until the Master Sign Program is approved by the City.
Table 3, Grand Monument Sign Details
Grand
Monument
Sign 1
Grand
Monument
Sign 2
Reserved for
Staff Use
For more detail see TMC 19.32.060
(B)(2).
Street in which
sign will be
placed along?
Each grand monument sign would
substitute for one monument sign
permitted in Table 1 listed above.
Maximum of two grand monument signs
per premise.
Total Sign
Area per face.
Sign message area may be increased up to
100 square feet per side, 200 square feet
total. For sites over 85 acres, the sign
message area may be increased up to 500
square feet per side, 1000 square feet
total.
Total sign area
per sign.
Total Sign Size
per face
No limitation on total structure size.
Total sign size
per sign.
Sign Height
(feet -inches)
Height of the sign structure may not
exceed the height of the tallest building on
the premises, except for sites over 85
acres, the height may exceed the tallest
building but shall not exceed 115 feet.
Height of
' Tallest
Structure on
the premise
where the
grand
monument sign
will be
located?
Distance from
closet edge of
sign to
property lines
(in feet)
The sign must be setback from the side
and rear property lines of the premise a
distance equal to the height increase
requested or five feet, whichever is
greater. The minimum front setback is
the smaller of the front yard required in
the zoning district or the height increase
requested.
Section 3- Reface and Coo ' Chan • e of Existin • Freestandin • Si • ns
When the current sign code became effective on August 24, 2010, the City strived to create a sign code that would reduce the
impact to property owners and businesses that had existing freestanding signs on their property. The city permits refaces and
copy changes to existing freestanding signs under several different scenarios:
1. A freestanding sign that conforms to the current sign code is permitted refaces and copy changes with a permit.
2. A freestanding sign that is not considered a freeway interchange sign, which was legally installed under the previous
sign code but does not meet the current Sign Code, is permitted to have refaces and copy changes for up to TEN years
from the effective date of the City's Sign Code (8/24/10). A permit is required for any reface or copy change. Please
note, modifying the sign height, increasing the sign area, or relocating the sign is not permitted without bringing the
sign into full conformance with the City's Sign Code. At the end of the ten year period the sign may remain as -is
indefinitely, however additional refaces or copy changes will require that the sign be brought into conformance with
the Sign Code.
3. A freestanding sign that is considered a freeway interchange sign and was legally installed under the previous sign
code is permitted to have refaces and copy changes for up to FIVE years from the effective date of the City's Sign
Code (8/24/10). A permit is required for any reface or copy change. Please note, modifying the sign height,
increasing the sign area, or relocating the sign is not permitted. At the end of the five year period the sign may remain
as -is indefinitely, however any changes to the face or structure of the sign will require that the sign be removed.
4. Freestanding signs that did not comply with the City's previous sign code, for example those that were installed while
an area was in King County, are not permitted to have any changes to the face or structure of the sign without bringing
the sign into conformance with the Sign Code.
Staff can help you research previous permit history to determine if your existing freestanding sign was installed under the
provisions of the City's previous Sign Code.
You will note that under Section 1 of this sign permit application additional signs are allowed for premises with over 800 feet of
linear street frontage or for corner properties. Even if your property qualifies for this additional signage under Section 1 you
will not be able to install it until any existing non -conforming sign(s) are removed (TMC 19.36.070).
Table 4. Existing Freestandin Sian Details
Existing
Freestanding
Sign 1
Existing
Freestanding
Sign 2
Note y � � ��
(_ , c e9
Date of last sign
permit issued by the
City for sign that is
being modified:
S 0 7 ` Ca'
Existing Sign Area:
72 qx2Q1[)
G4
Proposed Sign Area:
73/1/38„
Sign Height (feet-
inches):
�� 7 r�
` d y f °I '14e
V
Distance from closet
edge of sign to
property lines (in
feet):
16 /
\4�
t.. )1l t e wkio4 C
�/ gc1le
INSPECTIONS
A final inspection of the sign is required for all signs when installation is complete. The applicant or installer is required to
schedule the final Sign inspection through the City's Inspection line at (206)431-2451. The 4-digit inspection code needed for
scheduling the final Sign inspection is 1510. The applicant or installer does not need to be present for the final Sign inspection.
It is the responsibility of the installer to obtain the electrical permit and inspections from the City of Tukwila Permit Center at
(206) 431-3670. The electrical inspector will need access to complete the Electrical portion of the inspection.
GENERAL
The issuance of some signage within the City may require a permit from the Washington State Department of Transportation
(WSDOT). It is the applicant's responsibility to obtain all required permits from the appropriate government agency. For
information on permits that may be required from WSDOT call (360) 705-7296.
The issuance of a sign permit shall not be construed to be a permit for, or an approval of, any violation of any of the provisions
of this code or of any other ordinance of the City. Permits presuming to give authority to violate or cancel the provisions of this
code or other ordinances of the City shall not be valid. The issuance of a permit based on construction documents and other
data shall not prevent the Director from requiring correction of errors in the construction documents and other data (TMC
19.12.020 (C)).
Pursuant to TMC 19.12.0150, sign permits shall be valid for 180 days from the date of issuance of the sign permit. The
Director may approve one extension of up to 30 days if a written request is submitted to the City BEFORE expiration of the
180 day period.
3'-0"
/No cheRges
Mans without cad bra
flQ�J' „ Pry,., i Iron'? tho
gt „
afrt. mac` •Piarl�of Do
SEWING &
VACUUM
3' 0"
de rev
RECEIVED
Fili128 2011
COMMuNtT1f
DEVELOPMENT
SEWING &VACUUM
USIMNY
SEWING & VACUUM" 5 1/2' COPY;"OUrLEP- 7 5/6" COPY; LOGO - 17"
D/F NON -ILLUMINATED SIGN (IWO 5/F SIGNS MOUNTED BACK-TO-BACK ON EXISTING SIGN SUPPORT STRUCTURE)
ALL #220/225-37 SAPPHIRE BLUE, #220/225-63 GERANIUM RED & #220/22515 BRIGHT YELLOW VINYL ON WHITE DIBOND PANELS
DINING
INTERIORS
www.dlnIng(ntertors.comANL II
PHOTO ELEVATION SCALE: ± 3/6"m 1'- 0"
0 Jae Name: QUALITY SEW&VAC OWLET Seale: 11/2., 1'-0'(O17 AS NOTED) leer: MARTY JOHNSON
to A44ress: 1UIWA6A WASHNGTON Dale: 6/16/R011 ReR
Sales Rep: SIEVE TORNOW Deslpn N.. 061611011ARe
SEWOL OSEWOLET.SCV
O Carry Neon 5/En Systems, Inc. All Pl1hiz Rra.rv.6 0.z.r00(9AS IS ❑ cPP9091D 0, 0040D[s As xARR[D
ll
uen.,aMOAN rm aae..'.re ...We,
We, and or e.„arn.•r nr any CLIIMT APPROVAce N[narwr
DERRY
NEON
mL.una.•meV. s.cnn.rs a ALL u.t.C. 4.11a pcel DATE APPROVED.
Office Deliveries: 7400 Hardezon Road. Eveeert. WA 98101 D 14251776.E535 0 1600148E-1430 0 Fox: 1423/ 774-1221 0 E-Mail: lnfoO5erryneonsllnz.com