HomeMy WebLinkAboutPermit M15-0086 - SAHALE SNACKS - REFRIGERATION UNIT, EXHAUST FAN AND SUPPLY FANSAHALE SNACKS
3411 S 120 PL
SUITE 100
M15-0086
Parcel No:
Address:
City of Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206-431-3670
Inspection Request Line: 206-438-9350
Web site: http://www.TukwilaWA.gov
1023049069
MECHANICAL PERMIT
Permit Number: M15-0086
3411 S 120TH PL 100 Issue Date:
Permit Expires On:
Project Name: SAHALE SNACKS
I Iv 1 le
Owner:
Name:
Address:
Contact Person:
Name:
SABEY CORPORATION
12201 TUKWILA INTL BLVD 4THFL ,
SEATTLE, WA, 98168
BRYAN GALVIN
Address: 4102 B PL NW , AUBURN, WA, 98001
Contractor:
Name: UNIVERSAL REFRIGERATION INC
Address: 4102 "B" PL NW , AUBURN, WA, 98001
License No: UNIVERI159RF
Lender:
Name:
Address:
Phone: (253) 939-5501
Phone: (253) 939-5501
Expiration Date:
DESCRIPTION OF WORK:
INSTALLATION OF REFRIGERATION UNIT, EXHAUST FAN, SUPPLY FAN
Standard Note: Plans reviewed and approved by Allen
Valuation of Work: $78,633.00
Type of Work: NEW
Fuel type: ELECT
Fees Collected: $1,189.90
Electrical Service Provided by: SEATTLE CITY LIGHT
Water District: 125
Sewer District: VALLEY VIEW SEWER SERVICE
Current Codes adopted by the City of Tukwila:
International Building Code Edition:
International Residential Code Edition:
International Mechanical Code Edition:
Uniform Plumbing Code Edition:
International Fuel Gas Code:
2012
2012
2012
2012
2012
Permit Center Authorized Signature:kdkil
If
National Electrical Code:
WA Cities Electrical Code:
WAC 296-46B:
WA State Energy Code:
2014
2014
2014
2012
I hearby certify that I have read and examined this permit and know the same to be true and correct. All
provisions of law and ordinances governing this work will be complied with, whether specified herein or not.
The granting of this permit does not presume to give authority to violate or cancel the provisions of any other
state or local laws regulating construction or the performance of work. I am authorized to sign and obtain this
development permit and agree to the conditions attached to this permit.
Signature: Date: 7-3 ("i 5-
Print Name:
This permit shall become null and void if the work is not commenced within 180 days for the date of issuance, or if
the work is suspended or abandoned for a period of 180 days from the last inspection.
•Y�• •s
PERMIT CONDITIONS;
1: Work shall be installed in accordance with the approved construction documents, and any changes made
during construction that are not in accordance with the approved construction documents shall be
resubmitted for approval.
2: All permits, inspection record card and approved construction documents shall be kept at the site of work
and shall be open to inspection by the Building Inspector until final inspection approval is granted.
3: Readily accessible access to roof mounted equipment is required.
4: All construction shall be done in conformance with the Washington State Building Code and the
Washington State Energy Code.
5: Remove all demolition rubble and loose miscellaneous material from lot or parcel of ground, properly cap
the sanitary sewer connections, and properly fill or otherwise protect all basements, cellars, septic tanks,
wells, and other excavations. Final inspection approval will be determined by the building inspector based
on satisfactory completion of this requirement.
6: All plumbing and gas piping work shall be inspected and approved under a separate permit issued by the
City of Tukwila Building Department (206-431-3670).
7: All electrical work shall be inspected and approved under a separate permit issued by the City of Tukwila
Permit Center.
8: VALIDITY OF PERMIT: The issuance or granting of a permit shall not be construed to be a permit for, or an
approval of, any violation of any of the provisions of the building code or of any other ordinances of the City
of Tukwila. Permits presuming to give authority to violate or cancel the provisions of the code or other
ordinances of the City of Tukwila shall not be valid. The issuance of a permit based on construction
documents and other data shall not prevent the Building Official from requiring the correction of errors in
the construction documents and other data.
9: ***MECHANICAL PERMIT CONDITIONS***
10: All mechanical work shall be inspected and approved under a separate permit issued by the City of Tukwila
Permit Center (206/431-3670).
11: Manufacturers installation instructions shall be available on the job site at the time of inspection.
PERMIT INSPECTIONS REQUIRED
Permit Inspection Line: (206) 438-9350
0703 MECH EQUIP EFF
1800 MECHANICAL FINAL
0609 PIPE/DUCT INSULATION
0705 REFRIGERATION EQUIP
0701 ROUGH -IN MECHANICAL
CITY OF TUKWILA
Community Development Department
Permit Center
6300 Southcenter Blvd., Suite 100
Tukwila, WA 98188
http://www.TukwilaWA.gov
Mechanical Permit No. M
Project No.
Date Application Accepted:
Date Application Expires:
or ofce use onl
MECHANICAL PERMIT APPLICATION
Applications and plans must be complete in order to be accepted for plan review.
Applications will not be accepted through the mail or by fax.
**please print**
SITE LOCATION
Site Address: //
Tenant Name: 4Lt Q l e-144c'
PROPERTY OWNER
Name:
C�
Cd��e, rer 7 01r1
Address:
/Z 7
( TNk4t/,/1 /#, ?' rive(
City:
._,t4..,
State: ka. Zip:98/43
CONTACT PERSON - person receiving all project
communication
Name: Shane Heath Chuc Bryan
Address: 4102 B P1 NW
City: Auburn State: WA Zip: 98001
Phone: (253) 939-5501 Fax: (253) 735-3432
Email: / r/4q @universalrefrig.com
J
/� King Co Assessor's Tax No.: /OZ3Oy- 7067
c
� &f f �i `Z-0 Pi Suite Number: /On Floor: /S' f
New Tenant: El Yes EKNo
MECHANICAL CONTRACTOR INFORMATION
Company Name: Universal Refrigeration
Address: 4102 B NNW
City: Auburn State: WA Zip: 98001
Phone: (253) 939-5501 Fax: (253) 735-3432
Contr Reg No.: UNIVERI 159RF Exp Date: 04/01 /2016
Tukwila Business License No.: BUS-0993124
00
Valuation of project (contractor's bid price): $ 76/� e e
Describe the scope of work in detail: in 4( ow.1 ev 1p�Vic l•QJ I^/� t^i evIst rtd �. cfe —
�t..,.�. ;pe tL.tt it) (Lij exc ts7 �''t4 JJ s /
Use: Residential: New
Commercial: New
Replacement
Replacement
Fuel Type: Electric lir Gas ❑ Other:
HAApplications\Fotms-Applications On Line'2011 Applications\Mechanical Permit Application Revised 8-9-1 I.docx
Revised: August 2011
bh
Page 1 of 2
Indicate type of mechanical work being installed and the quantity below:
Unit Type
Qty
Furnace <100k btu
Furnace >100k btu
Floor furnace
Suspended/wall/floor
mounted heater
Appliance vent
Repair or addition to
heat/refrig/cooling
system
Air handling unit
<10,000 cfin
Unit Type
Qty
Air handling unit
>10,000 cftn
Evaporator cooler
Ventilation fan
connected to single duct
Ventilation system
Hood and duct
Incinerator — domestic
Incinerator —
comm/industrial
Unit Type
Qty
Fire damper
Diffuser
Thermostat
Wood/gas stove
Emergency generator
Other mechanical
equipment
Boiler/Compressor
Qty
0-3 hp/100,000 btu
3-15 hp/500,000 btu
15-30 hp/1,000,000 btu
30-50 hp/1,750,000 btu
50+ hp/1,750,000 btu
PERMIT APPLICATION NOTES -
Value of construction — in all cases, a value of construction amount should be entered by the applicant. This figur''will be reviewed'and is subject
to possible revision by the permit center to comply with current fee schedules.
Expiration of plan review — applications for which no permit is issued within 180.days following the date of application shall expire by limitation.
The building official may grant one extension of time for additional periods not to exceed 90 days each. The extension shall be requested in writing
and justifiable cause demonstrated. Section 105.3.2 International Building Code (current edition).
I HEREBY CERTIFY THAT I HAVE READ AND EXAMINED THIS APPLICATION AND KNOW THE SAME TO BE TRUE UNDER
PENALTY OF PERJURY BY THE LAWS OF THE STATE OF WASHINGTON, AND I AM AUTHORIZED TO APPLY FOR THIS PERMIT.
BUILDING OWNS R AUTHQRIZED AGENT:
Signature:
Print Name: I5r Kin J CI PR
Mailing Address:
4102 B P1 NW
Day Telephone:
Auburn
City
Date: 7 0 S
(253) 939-5501
WA 98001
State Zip
H:Wpplications\Fonns-Applications On Line\2011 Applications\Mechanical Permit Application Revised 8-9-11.docx
Revised: August 2011
bh
Page 2 of 2
Cash Register Receipt
City of Tukwila
Receipt Number
R5690
DESCRIPTIONS I ACCOUNT I QUANTITY I
PermitTRAK
PAID
$1,189.90
M15-0086 Address: 3411 S 120TH PL 100 Apn: 1023049069
$1,189.90
MECHANICAL
$1,144.13
PERMIT ISSUANCE BASE FEE
R000.322.100.00.00
0.00
$32.50
PERMIT FEE
R000.322.100.00.00
0.00
$882.80
PLAN CHECK FEE
R000.322.102.00.00
0.00
$228.83
TECHNOLOGY FEE
$45.77
TECHNOLOGY FEE
TOTAL FEES PAID BY RECEIPT: R5690
R000.322.900.04.00 1
0.00
$45.77
$1,189.90
Date Paid: Wednesday, July 08, 2015
Paid By: UNIVERSAL REFRIGERATION
Pay Method: CHECK 49683
Printed: Wednesday, July 08, 2015 3:53 PM 1 of 1
OrP SYSTEMS
INSPECTION NO.
INSPECTION RECORD
Retain a copy with permit
PERMIT NO.
CITY OF TUKWILA BUILDING DIVISION
6300 Southcenter Blvd., #100, Tukwila. WA 98188
Permit Inspection Request Line (206) 438-9350
(206) 431-3670
Project:
SA 7Atii SA.kt
Type of Inspection:
</ ea/ / iaa
Address:
,Sy// s /.014 P/
Sao
Date Called:
Special Instructions:
.Ni
Date Wanted:
F G..(�
a.m.
p.m.
Requester:
r-14,Jk
iii
adV
Phone No:
Z�266 SD 6
Approved per applicable codes. LJ Corrections required prior to approval.
COMMENTS:
T'Giit.,xj Recit
Inspector:
Date�:i
REINSPECTION FEE REQUIRED. Prior to next inspection. fee must be
paid at 6300 Southcenter Blvd.. Suite 100. Call to schedule reinspection.
INSPECTION NO.
INSPECTION RECORD
Retain a copy with permit
0(14
PERMIT NO.
CITY OF TUKWILA BUILDING DIVISION
6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431-3670
Permit Inspection Request Line (206) 431-2451
Project: d�� ic
Type of ns
tion:
Address:
/d)4 P1
Date Called:
Special Instructions:
on
Date Wanted:
%
^/`5
a.m.
p.m.
Requester:
Phone No:
Approved per applicable codes. O Corrections required prior to approval.
COMMENTS:
Inspector:
Date:
REINSPECTION FEE REQUIRED. Prior to next inspection. fee must be
paid at 6300 Southcenter Blvd., Suite 100. Call to schedule reinspection.
D
INSPECTION RECORD
Retain a copy with permit
INSPECTION NO. PERMIT
CITY OF TUKWILA BUILDING DIVISION
6300 Southcenter Blvd., #100, Tukwila. WA 98188
Permit Inspection Request Line (206) 438-9350
(206) 431-3670
Project:
SAf-I�L--� .SNJ k'S
Type of Inspection: /
,e((?*SiLti i�-Cc�l
Address:
31 I 121:411 ? 1106
Date Called:
Special Instructions:
ri41
Date Wanted:
—4-/ i -
a.m.
p.m.
Requester:
1c,t h airy
Phone No:
as-3 Z 6, 56
Approved per applicable codes. E Corrections required prior to approval.
COMMENTS:
/ //(e/ 1/*ins/
41/ fir- f ,4 rle
Inspector:
c-aZip'/
Date:
REINSPECTION FEE REQUIRED. Prior to next inspection, fee must be
paid at 6300 Southcenter Blvd., Suite 100. Call to schedule reinspection.
mom ASSOCIATED AIR BALANCE COUNCIL
Nur
Project Name: SattNakt SrQ-LkS
System:
TERMINAL
NUMBER
ROOM
NUMBER
TERMINAL
TYPE I SIZE
AIR DISTRIBUTION DATA
FACTOR
DESIGN
TEST (FPM OR CFM)
Date: (WC/6-
Page: 2 of 3
M IS-008
FINAL
FPM 1 CFM
TEST 1 I TEST 2 1 TEST 3
FPM I CFM
1
2
Plo-
Ski
3xZ2
225 0
ZSno
2100
3 770
2700
3000
2450
23/ 0
27oo
2(o0t')
CI
RECEJVED
TY OF TUKWIL
NE
AUG 0 6 2015
RMIT CENTER
Remarks:
ti
ASSOCIATED AIR BALANCE COUNCIL
Project Name: S 3 k SW/1
System: N tA.oulnttid ±t! (1\?.blA")
AIR DISTRIBUTION DATA
Date: 2151)
Page: I of 3
TERMINAL
NUMBER
1
ROOM
NUMBER
TERMINAL
TYPE I SIZE
FACTOR
DESIGN
FPM I CFM
TEST (FPM OR CFM)
FINAL
TEST 1 I TEST 2 I TEST 3
FPM I CFM
5Cc
sA
22
2Ls1t21
ZZSD
22.5 0,
Z'170
2.5-4O
lath
21410
2 o
227S
Z Noo
I•1ECEIV
Cn Y
ED
OF TU
KWILA
PE
i#U
06
'015
!lIIT CE
Remarks:
Date: i9/51/
mum ASSOCIATED AIR BALANCE COUNCIL
W Page: 3 of
Project Name: 2d, J.Je
System: ,54^1/`n, w (A —O4 - CF2) k (A 2 -04 - SF2)
TERMINAL
NUMBER
ROOM
NUMBER
TERMINAL
TYPE I SIZE
AIR DISTRIBUTION DATA
FACTOR
DESIGN
FPM I CFM
TEST (FPM OR CFM)
TEST 1 I TEST 2 I TEST 3
FINAL
FPM I CFM
2
3
4
5
-7
9
10
5At.
Ptah
SA
5A
5At
sq
sA
CA
EA
EA
EA
12.x12
1Zx1Z
ZZx1L.,
12xl2
t?.x12
!'
lo5o
to 41)
6S'D
cs.50
SSo
Sto
5-710
760
c160
3-70
(o7ID
lo®0 ,
4.00
MEMO
S75"
4976
(3r
Co �e
570
20► z.q
2oxz
2*(z4t
2oxiLi
e S�o
89)
eso
S90
1160
t 2So
Silo
goo
6.60
10 So
7Sa
5"L
9643
3ECEIV
CITY
OF TUJ
AUG 06
PER
ED
KWILA
2O 5
MIT LE
NTER
Remarks:
Project
Information
FIGURE C408.1.2.1
COMMISSIONING COMPLIANCE CHECKLIST
Project Name: lam, 4z_
M
Project Address: silo rj no 444 pG l u is
Commissioning Authority: VNh).....vstd
Commissioning
Plan
(Section C408.1.1)
EV Commissioning Plan was used during construction and included items below
• A narrative description of activities and the personnel intended to accomplish each one
• Measurable criteria for performance
• Functions to be tested
Systems
Balancing
(Section C408.2.2)
IV Systems Balancing has been completed
• Air and Hydronic systems are proportionately balanced in a manner to first minimize throttling losses
• Test ports are provided on each pump for measuring pressure across the pump.
Functional
Testing
(Sections C208.2.3,)
C408.3.1, C408.4.1.3
and C408.5.1
LV HVAC Equipment Functional Testing has been completed (Section C408.2.3.1)
HVAC equipment has been tested to demonstrate the installation and operation of components, systems and
system -to -system interfacing relationships in accordance with approved plans and specifications
�/
CHVAC Controls Functional Testing has been completed (Section C408.2.3.2)
HVAC controls have been tested to ensure that control devices are calibrated, adjusted and operate properly.
Sequences of operation have been functionally tested to ensure they operate in accordance with approved
plans and specifications
El Economizers Functional Testing has been completed (Section C408.2.3.3) / ' A
Economizers operate in accordance with manufacturer's specifications /�J(/
Lighting Controls Functional Testing has been completed (Section C408.3.1) N/,4.
Lighting controls have been tested to ensure that control devices, components, equipment, and systems are
calibrated, adjusted and operate in accordance with approved plans and specifications
LI Service Water Heating System Functional Testing has been completed (Section C408.4.1) A) A.
Service water heating equipment has been tested to ensure that control devices, components, equip ent, and
systems are calibrated, adjusted and operate in accordance with approved plans and specifics ions
ID Pool and Spa Functional Testing has been completed (Section C408.4.1.3) di .
Pools and spas have been tested to ensure service water heating equipment, time switches and heat recovery
equipment are calibrated, adjusted and operate in accordance with approved plans and sp cifications
El Metering System Functional Testing has been completed (Section C408.5.1) N
Energy source meters, energy end -use meters, the energy metering data acquisition sys em and required
display are calibrated adjusted and operate in accordance with approved plans and specifications
Supporting
Documents
(Section 408.1.3.2)
Manuals, record documents and training have been completed or are scheduled
• System documentation has been provided to the owner or scheduled date: i8 // !S
• Record documents have been submitted to owner or schedule e dae:
• Training has been completed or scheduled date:
Commissioning
Report
(Section C408.1.2)
Preliminary Commissioning Report submitted to Owner and includes items below
• Deficiencies found during testing required by this section which have not been corrected at the time of
report preparation
• Deferred t-sts, which cannot be performed at the time of report preparation due to climatic conditions.
Certification
I hereby ce1 ify at all requirements for Commissioning have been completed in accordance with the
Washingt �- neTgy Code, including all items above.
Buildin
RECEIVED
presentatCITy OF TUKWILA
AUG 0 6 2015
CE-94 2012 Washington State Energy Code
PERMIT CENTER
0
XX
W1
/ <
4
'
X
Y
!2Ti
_
�1
1
XI
XX
\ X
X
I
i
/ {{
AEV®NOTE&
ROUTE 01.CT IF THROWN ROOF ANO NSTAL,L SO DEGREE ELDON
SC ABOVE ROOF LN£ 14711117 LCPLO DUCT OUTLET CUT AT 45
omen. INSTALL ORDSf TEEN ONDUCT OUTLET. ROUTE DUCT
OOMI TO RELOCATED WA9(ER RECONNECT DUCT TO WASHER
FXIWIST FMB. ROUTE FAH DRAIN TO NEAREST WM W1fN ?PVC
DRAB PPE RIOT SHALL OE STARLESS STEEL MTN JOINTSHAIRS
WATER TIGHT.
GENERAL NOTES
1. SEE MECHANICAL SCOPE OF WCRR FOR
ADORIONAL NVAC RFORNATION.
LV.LLAarsati?TT WrHIIn1MI1ND'MNIO]DOI]1PWTCMP
1S1850l2X1%
SRA
SEAL PENETRATION
UP TNROUGN ROOF
VEATHER TRAIT.
ROLHE DONN TO
WASHER 1VMSw53-
NO CONTINUATION
1716507 770
EAA
s 1 1
NVAC PLAN
CEILING PLAN
15
M1s-OOB2
1s
17
RECEIVED
CITY OF TUKWILA
AUG 0 6 2015
PERMIT CENTER
ro.l 016_ I by I MO I a.to1otal
A 1111: CAR DWG ISSLIFJFO1
C STRUCTION
AREA 01
+BURNS
MSrDONNELL
O2/03a015
0NlOn0
W. WRTZ
C. KRAUSE
cream
W. W RR
SAHALE
SNACKS'
/WHILE SNACKS
EW Lt1£ 1 I WARR001L 1 511RO0EN UPGRADES
MECHANICAL
NVAC PLAN
PNINI
81727
Polo"
are1X0 130
0
81727-MH131
RIM1 1 0f 1
11. 111727-011310013
A
11
0
E
14 10 TS
ZN
x
1
I
ti
X
X
x
X
X
(REF)
17.4 UY
12,0 UPTI URC
SEAL PENETRATION
WEATHER TICIHT --
05P12%1Z
SAA
///''' UPTHRU ROOF. SEAL
/ PENETRATION
TIGHT
/ WE
10"0
ue7-QT55012Y1j
SAA
2'-1 t
NO CROT1 *1
rEsoaaxa�Il
� ,EAw
N
WEIDOWN
TO WASHER 02
I
20.0
N
IX
11 asa2R
EAA
(REF)
1
a
r
UPTHRU ROOF. SEAL
PENETRATION
WEATHER TIGHT
/ \�
Xi
I -
7--1
NOCO(TISUATION
KEYED NOTES
0t ROUTE DUCT UP THROUGH ROOF AND INSTAL SO DEGREEEUHOW
20' ABOVE ROOF LIRE WITH tT LONG DUCT' OUTLET CUT AT 45
O€G5EES. INSTALL BROSOTEE1ON DUCT OUTLET. DUCT SHALL. RE
STANLESS STEEL WITH JOINTS SEALED WATER TIGHT.
OROUTE DUCT DOAN TO RELOCATED WASHER. RECONNECT DUCT TO
WASHER EXHAUST FM& ROUTE FAH MAN TO NEAREST SUMP WITH
}"PVC ORAN PPE DUCT SHALL BE STAINLESS STEEL . MR JOINTS
SEALED WATEt TIGHT.
CENERAL NOTES
1, SEE MECHANCAL SCOPE OF WORK FOR ADO(Y10NAL HVAC
INFORMATION.
HVAC PLAN
CEILING LEVEL
0 Y 1
a®
atCEIVEQ
..1 TV OF TUKWILA
AUG 0 6 205
PERMIT CENTER
no" Oslo
ICI
101
L 04113/15 CAR OM
ISSUED FOR
ONSTRUCCTION
BURNS
WMSDONNELL
da.
021032015
001I9011d
W WIRTZ
d1,lihd
C. KRAUSE
anaNd
W. VARR
SAHALE
SNACKS'
SAHALE SNACKS
NEW IP01 S RAMIE/CON f N,NOGEN UPGRADES
MECHANICAL
HVAC PUN
P515 at cal544
01727
NaWO
81727-MH431
RY.
OMNI 1 W t a1401
M 01727440A51.0.2
ua&.sI.C1®N1171MJCMCCI11711AiM0NOYN YIOTIY MGM MAP
'II. I by I cfo9 I 0.40,
001115 CAK DWG IX7NSTR c6,,,N
O
27-0'
6,10'
(REP)
9'-0 1/2'
1_I
h
aas .z6na
O
SUNS
d
9E'P
(REF)
KOCONTINUATOR
EMU
11
0
II
()
GENERAL NOTES
C _.
lirriVESEE
- VOTING FAN
SUPPORT STRUCTURE
22
S/M
229O2,XIA
SA -A
t. SEE MECNANCAL SCOPE OF WORK FOR
AMMON& NVAC INFORMATION.
225G3Wk24
FA.A
IRO
ELO-01A
PRECOOL. BLOWER
ICONSTRU CT NEW WOOD
SUPPORT STRUCTURE FOR FAN)
a
•
C)
1,ll 1'1
NVAC PLAN
CE LINO LEVEL
a S f
.w®
RECEIVED
CITY OF TUKWILA
AUG 0 6 2015
PERMIT CENTER
KEYPLNN
BURNS
SNNDONNELL
0301E015
D.Y9D.6
W. WRTZ
6.Nb9
C. KRA1EE
CIWO(IO
W. VARTZ
yµsc�I�.NtT t. A.
SAHALE
SNACKS'
6ANALE SNACKS
REWIRE 1I WASHROOM IPZTROGEN UPGRADES
6ECHAR AL.
NVAC PLAN
prq.ol I antimA
S1727
&SWIG
81727-MH231 0
Cal t of 1 7/14410
It. B17274W1231w9
1.ul1 C1.3Nt1TnM'AOMdCNpi17M12t3DWOMCtls1]nFN1TCMP
INGREENHECK
Building Value in Air.
FILrff
Printed Date: 3/4/2015
Job: Sahale
Mark: AIR-04-EF-1
Performance
Quantity
1
Volume (CFM)
2,500
Extemal SP (in. wg)
1.5
Total SP (in. wg)
1.5
Total TP (in. wg)
1.576
Operating Power (hp)
1.1
Start -Up Power (hp)
1.1
Fan RPM
1511
Max Fan RPM
3,898
Elevation (ft)
30
Start-up Temp.(F)
70
Operating Temp.(F)
70
Fan Configuration
Size
20
Class
II
Arrangement
9
Discharge Position
Horizontal
Mounting
Base Mount
Material Type
Steel
Equipment Weights
Fan (LMD)(Ib)
240
Motor/Drive (Ib)
4
Accessories (Ib)
79
Misc Fan Data
FEG
67
Outlet Velocity (ft/min)
1,104
Static Efficiency (%)
57
Tip Speed (ft/min)
8,034
Motor and Drives
Motor Supplier
Greenheck
Size (hp)
1 1/2
RPM
1725
Enclosure
ODP
Voltage
460
Cycle
60
Phase
3
Frame Size
145T
Max Frame Size
256
Location
A
Pulley Type
Constant
Drive Loss (%)
5.9
Drives
Single
Drive Service Factor
1.5
QmCQ
WORLDWIDE
RImass j
n�ro SIP
nm aaa mxrmrnr
°o. °aao
78 83 81
level, on 11
Model: VAB-20F14-II-15
Vane Axial Belt Drive Fan
Operating Performance
1.6
1.4
1.2
0.8
0.6
0.4
0.2
1.6
1.4
1.2
O
0
0.6 Y
0.4
0.2
0.0 ' 0.0
0 5 10 15 20 25 30 35 40 45
Volume (CFM)
n Operating Bhp point
(' Operating point at Total SP
• Operating point at External SP
Fan curve
- - System curve
Brake horsepower curve
Sound Power by Octave Band
(Sound Data sound 62.5
wA A weght
Inlet 77
4
dBA - A weighted sound pressure level, based on 11.5 dB attenuation per octave band at 5 ft- dBA levels are not licensed by AMCA Irgemational
1000
79
2000
74
10 REVIEWED FOR
CODE COMPLIANCE
APPROVED
JUL 2 9 2015
City of Tukwila
BUILaWirMbSION
CITY OF TUKWILA
JUL 082015
PERMIT CENTER
4000
68
8000
64
LwA
83
dBA
72
to
m
wg-vc(e
CAPS 4.16.1923 Z:\Chad\winjobs\Sahale.gfcj Page 1 of 16
DIGREENHECK
Building Value in Air.
Printed Date: 3/4/2015
Job: Sahale
Mark: AIR-04-EF-1
Model: VAB-20F14-II-15
Vane Axial Belt Drive Fan
Standard Construction Features:
HOUSING: Continuously welded steel housing - Welded steel straightening vanes - Inlet and outlet flanges
with mounting holes - Heavy gauge steel motor supports with adjustment screws for belt tensioning -
Structural parts are phosphatized and coated with Permatector.
BEARINGS, SHAFT, AND WHEEL: Heavy duty, self -aligning ball or roller pillow block bearings with
extended lubrication lines - Precision -ground, polished, solid steel shafts - Aircraft quality, heat treated
A356-T6 cast aluminum rotor hub and blades.
Options & Accessories:
NEMA Premium Efficient Motor - meets NEMA Table 12-12
Motor VFD Rated without Shaft Grounding Protection
Motor with Class B Insulation
Coated with Permatector, Concrete Gray-RAL 7023, Fan and Attached Accessories
Mounting Brackets - Base Mount
UUcUL-705 -"Power Ventilators"
MotorCover
Housing is sealed for outdoor use
CAPS 4.16.1923 Z:\Chad\winjobs\Sahale.gfcj Page 2 of 16
IBGREENHECK
Building Value in Air.
Printed Date: 3/4/2015
Job: Sahale
Mark: AIR-04-EF-1
Model: VAB-20F14-II-15 Vane Axial Belt Drive Fan
END VIEW SHOWS FROM OUTLET END OF UNIT
29.00
--I 9.50
25.13
MAX
15.00
9.50
L-19.00—_1
—22.00--
Notes: All dimensions shown are in units of in.
6 MOUNTING SLOTS
Bolt Circle 0 21.75
Flange Hole 0 0.44
Quantity 8
CAPS 4.16.1923
Z:\Chad\winjobs\Sahale.gfcj Page 3 of 16
GREENHECK
Building Value in Air.
Printed Date: 3/4/2015
Job: Sahale
Mark: AIR-04-EF-1
AMCA
aniCa
WORLDWIDE
CERTIFIED
RRTIRG:
AIR
PERf4Rmancc
AIR Q,
AIOVEAIEAT �4
nno COATROI •Q��
Af$OCIATIOn ck.0�
IATERAATIOAAI.IAC.
AMCA Licensed for Air Performance. Power rating (BHP/kW) includes transmission losses.
Greenheck Fan Corporation certifies that the model shown herein is licensed to bear the AMCA Seal. The ratings shown
are based on tests and procedures performed in accordance with AMCA Publication 211 and comply with the
requirements of the AMCA Certified Ratings Program. The AMCA Certified Ratings Seal applies to air performance
ratings only. Performance certified is for installation type D - Ducted inlet, ducted outlet. Performance ratings do not
include the effects of appurtenances (accessories) in the airstream. Power ratings (BHP/kW) include transmission losses.
CAPS 4.16.1923 Z:\Chad\winjobs\Sahale.gfcj Page 4 of 16
j GREENHECK
Building Value in Air.
Printed Date: 3/4/2015
Job: Sahale
Mark: AIR-04-SF-1
Performance
Quantity
1
Volume (CFM)
2,500
External SP (in. wg)
1.5
Total SP (in. wg)
1.5
Total TP (in. wg)
1.576
Operating Power (hp)
1.1
Start -Up Power (hp)
1.1
Fan RPM
1511
Max Fan RPM
3,898
Elevation (ft)
30
Start-up Temp.(F)
70
Operating Temp.(F)
70
Fan Configuration
Size
20
Class
II
Arrangement
9
Discharge Position
Horizontal
Mounting
Base Mount
Material Type
Steel
Equipment Weights
Fan (LMD)(Ib)
240
Motor/Drive (Ib)
4
Accessories (Ib)
79
Misc Fan Data
FEG
67
Outlet Velocity (ft/min)
1,104
Static Efficiency (%)
57
Tip Speed (ft/min)
8,034
Motor and Drives
Motor Supplier
Greenheck
Size (hp)
1 1/2
RPM
1725
Enclosure
ODP
Voltage
460
Cycle
60
Phase
3
Frame Size
145T
Max Frame Size
256
Location
A
Pulley Type
Constant
Drive Loss (%)
5.9
Drives
Single
Drive Service Factor
1.5
amca
■ORIDWIDE
CERTIFIED
RRTIRGI
AIR
error HCII
nc
ximcn
a'Po
Model: VAB-20F14-II-15
Vane Axial Belt Drive Fan
Operating Performance
1.6
1.4
1.2
3 1.0
0.8
a 0.6
PI 0.4
0.2
0.0
0 5 10 15 20 25 30
Volume (CFM) x 100
Operating Bhp point
C ) Operating point at Total SP
o Operating point at External SP
Fan curve
- - System curve
Brake horsepower curve
Sound Power by Octave Band
ISound Data 62.5
Inlet 77
78 83 81
level on SI51
wA - A wet sound power .4
dBA - A weighted sound pressure level, based on 11.5 dB attenuation per octave band at 5 ft- dBA levels are not licensed by AMCA International
1000
79
2000
74
4000
68
35 40 45
8000
64
LwA
83
dBA
72
1.6
1.4
1.2
1.0
0.8 3
0..
0.6 e
0.4
0.2
0.0
to
m
CAPS 4.16.1923 Z:\Chad\winjobs\Sahale.gfcj Page 5 of 16
fGREENHECK
Building Value in Air.
Printed Date: 3/4/2015
Job: Sahale
Mark: AIR-04-SF-1
Model: VAB-20F14-II-15
Vane Axial Belt Drive Fan
Standard Construction Features:
HOUSING: Continuously welded steel housing - Welded steel straightening vanes - Inlet and outlet flanges
with mounting holes - Heavy gauge steel motor supports with adjustment screws for belt tensioning -
Structural parts are phosphatized and coated with Permatector.
BEARINGS, SHAFT, AND WHEEL: Heavy duty, self -aligning ball or roller pillow block bearings with
extended lubrication lines - Precision -ground, polished, solid steel shafts - Aircraft quality, heat treated
A356-T6 cast aluminum rotor hub and blades.
Options & Accessories:
NEMA Premium Efficient Motor - meets NEMA Table 12-12
Motor VFD Rated without Shaft Grounding Protection
Motor with Class B Insulation
Coated with Permatector, Concrete Gray-RAL 7023, Fan and Attached Accessories
Mounting Brackets - Base Mount
UL/cUL-705 - "Power Ventilators"
MotorCover
Housing is sealed for outdoor use
CAPS 4.16.1923 Z:\Chad\winjobs\Sahale.gfcj Page 6 of 16
j GREENHECK
Building Value in Air.
Printed Date: 3/4/2015
Job: Sahale
Mark: AIR-04-SF-1
Model: VAB-20F14-II-15 Vane Axial Belt Drive Fan
END VIEW SHOWS FROM OUTLET END OF UNIT
29.00
_1 9.50
1
25.13
MAX
15 00
r
9.50
Notes: All dimensions shown are in units of in.
Bolt Circle 0 21.75
Flange Hole 0 0.44
Quantity 8
CAPS 4.16.1923
Z:\Chad\winjobs\Sahale.gfcj Page 7 of 16
j GREENHECK
Building Value in Ain
Printed Date: 3/4/2015
Job: Sahale
Mark: AIR-04-SF-1
AMCA
camcca
WORLDWIDE
OERTIFIED
RRTIIIG$
AIR
remfonmance
RIR
fnOVEmEOT
Rno COATROI •O4)c
RfSOCiATIOn o�
IQTEROnTIOnnl.IfC.'
AMCA Licensed for Air Performance. Power rating (BHP/kW) includes transmission losses.
Greenheck Fan Corporation certifies that the model shown herein is licensed to bear the AMCA Seal. The ratings shown
are based on tests and procedures performed in accordance with AMCA Publication 211 and comply with the
requirements of the AMCA Certified Ratings Program. The AMCA Certified Ratings Seal applies to air performance
ratings only. Performance certified is for installation type D - Ducted inlet, ducted outlet. Performance ratings do not
include the effects of appurtenances (accessories) in the airstream. Power ratings (BHP/kW) include transmission losses.
CAPS 4.16.1923 Z:\Chad\winjobs\Sahale.gfcj Page 8 of 16
f GREENHECK
Building Value in Air.
Printed Date: 3/4/2015
Job: Sahale
Mark: AIR-04-SF-2
Performance
Quantity
1
Volume (CFM)
7,600
External SP (in. wg)
1
Total SP (in. wg)
1
Total TP (in. wg)
1.142
Operating Power (hp)
2.1
Start -Up Power (hp)
2.1
Fan RPM
966
Max Fan RPM
2,599
Elevation (ft)
30
Start-up Temp.(F)
70
Operating Temp.(F)
70
Fan Configuration
Size
30
Class
II
Arrangement
9
Discharge Position
Horizontal
Mounting
Base Mount
Material Type
Steel
Equipment Weights
Fan (LMD)(Ib)
550
Motor/Drive (Ib)
74
Accessories (Ib)
76
Misc Fan Data
FEG
71
Outlet Velocity (ft/min)
1,510
Static Efficiency (%)
60
Tip Speed (ft/min)
7,652
Motor and Drives
Motor Supplier
Greenheck
Size (hp)
3
RPM
1725
Enclosure
ODP
Voltage
460
Cycle
60
Phase
3
Frame Size
182T
Max Frame Size
326
Location
A
Pulley Type
Constant
Drive Loss (%)
4.8
Drives
Multiple
Drive Service Factor
1.5
amca
NORIOUIDE
CERTIFIED
RIITIRGf
RIR
nrro. foec
o.Imat °.•
cm, con root
IfinrI•MCO*111 IOC
Model: VAB-30F1 7-11-30
Vane Axial Belt Drive Fan
Operating Performance
1.5
1.2
0.9
C)
R
4-
co
0.3
0.0
0 2 4 6 8
Volume (CFM) x 1,000
A Operating Bhp point
C) Operating point at Total SP
• Operating point at External SP
Fan curve
- - - System curve
Brake horsepower curve
Sound Power by Octave Band
10
12
Sound Data 62.5
Inlet 77
wA-A sound power 4
dBA - A weighted sound pressure level, based on 11.5 dB attenuation per octave band at 5 ft- dBA levels are not licensed by AMCA International
2.5
2.0
0.5
0.0
0)
O
125 4L83
5 83 84level on1
1000
79
2000
74
4000
70
8000
66
LwA
84
dBA
73
CAPS 4.16.1923 Z:\Chad\winjobs\Sahale.gfcj Page 9 of 16
IBGREENHECK
Building Value in Air.
Printed Date: 3/4/2015
Job: Sahale
Mark: AIR-04-SF-2
Model: VAB-30F1 7-11-30
Vane Axial Belt Drive Fan
Standard Construction Features:
HOUSING: Continuously welded steel housing - Welded steel straightening vanes - Inlet and outlet flanges
with mounting holes - Heavy gauge steel motor supports with adjustment screws for belt tensioning -
Structural parts are phosphatized and coated with Permatector.
BEARINGS, SHAFT, AND WHEEL: Heavy duty, self -aligning ball or roller pillow block bearings with
extended lubrication lines - Precision -ground, polished, solid steel shafts - Aircraft quality, heat treated
A356-T6 cast aluminum rotor hub and blades.
Options & Accessories:
NEMA Premium Efficient Motor - meets NEMA Table 12-12
Motor VFD Rated without Shaft Grounding Protection
Motor with Class B Insulation
Coated with Permatector, Concrete Gray-RAL 7023, Fan and Attached Accessories
Mounting Brackets - Base Mount
UUcUL-705 - "Power Ventilators"
MotorCover
Housing is sealed for outdoor use
CAPS 4.16.1923 Z:\Chad\winjobs\Sahale_gfcj Page 10 of 16
IBGREENHECK
Building Value in Air.
Printed Date: 3/4/2015
Job: Sahale
Mark: AIR-04-SF-2
Model: VAB-30F17-II-30 Vane Axial Belt Drive Fan
END VIEW SHOWS FROM OUTLET END OF UNIT
1
37 00
13.50 —1I
13.50 ---
f
33 63
MAX
21 25
1 MINIMS
r
L-27.00
30.00 --
Notes: All dimensions shown are in units of in.
6 MOUNTING SLOTS
Bolt Circle 0 32
Flange Hole 0 0.44
Quantity 8
CAPS 4.16.1923
Z:\Chad\winjobs\Sahale.gfcj Page 11 of 16
LSGREENHECK
Building Value in Air.
Printed Date: 3/4/2015
Job: Sahale
Mark: AIR-04-SF-2
AMCA
CIMCO
WORLDWIDE
CERTIFIED
RATIAGS
RIR
P(IWORMAnCE
AIR kid
fflOVEflIEOT 4'
flfl0 COflTROI •04>c
flSSOCIflTIOfl •o,
IOTEROflTIOflflL.IOC.
AMCA Licensed for Air Performance. Power rating (BHP/kW) includes transmission losses.
Greenheck Fan Corporation certifies that the model shown herein is licensed to bear the AMCA Seal. The ratings shown
are based on tests and procedures performed in accordance with AMCA Publication 211 and comply with the
requirements of the AMCA Certified Ratings Program. The AMCA Certified Ratings Seal applies to air performance
ratings only. Performance certified is for installation type D - Ducted inlet, ducted outlet. Performance ratings do not
include the effects of appurtenances (accessories) in the airstream. Power ratings (BHP/kW) include transmission losses.
CAPS 4.16.1923 Z:\Chad\winjobs\Sahale.gfcj Page 12 of 16
fJGREENHECK
Building Value in Air.
Printed Date: 3/4/2015
Job: Sahale
Mark: AIR-04-EF-2
Performance
Quantity
1
Volume (CFM)
7,600
Extemal SP (in. wg)
1
Total SP (in. wg)
1
Total TP (in. wg)
1.142
Operating Power (hp)
2.1
Start -Up Power (hp)
2.1
Fan RPM
966
Max Fan RPM
2,599
Elevation (ft)
30
Start-up Temp.(F)
70
Operating Temp.(F)
70
Fan Configuration
Size
30
Class
II
Arrangement
9
Discharge Position
Horizontal
Mounting
Base Mount
Material Type
Steel
Equipment Weights
Fan (LMD)(Ib)
550
Motor/Drive (Ib)
74
Accessories (Ib)
76
Misc Fan Data
FEG
71
Outlet Velocity (ft/min)
1,510
Static Efficiency (%)
60
Tip Speed (ft/min)
7,652
Motor and Drives
Motor Supplier
Greenheck
Size (hp)
3
RPM
1725
Enclosure
ODP
Voltage
460
Cycle
60
Phase
3
Frame Size
182T
Max Frame Size
326
Location
A
Pulley Type
Constant
Drive Loss (%)
4.8
Drives
Multiple
Drive Service Factor
1.5
amca
WORLDWIDE
OERTIfIED
RRTIRGs
PttrORUHOI
!Wm..
coon
nosocimron
o�pa
Model: VAB-30F1 7-11-30
Vane Axial Belt Drive Fan
Operating Performance
1.5
0.9
c
0.6
a
co
0.3
2 4 6 8
Volume (CFM) x 1,000
n Operating Bhp point
0 Operating point at Total SP
o Operating point at External SP
Fan curve
- - System curve
Brake horsepower curve
Sound Power by Octave Band
10
12
Sound Data 62.5
Inlet 77
83 84 83
level on 1 S7
wA - A sound power .4
dBA - A weighted sound pressure level, based on 11.5 dB attenuation per octave band at 5 ft- dBA levels are not licensed by AMCA International
1000
79
2000
74
4000
70
8000
66
LwA
84
dBA
73
2.5
2.0
1.5 -a
0.5
0.0
N
O
CAPS 4.16.1923 Z:\Chad\winjobs\Sahale.grcj Page 13 of 16
INGREENHECK
Building Value in Air.
Printed Date: 3/4/2015
Job: Sahale
Mark: AIR-04-EF-2
Model: VAB-30F1 7-11-30
Vane Axial Belt Drive Fan
Standard Construction Features:
HOUSING: Continuously welded steel housing - Welded steel straightening vanes - Inlet and outlet flanges
with mounting holes - Heavy gauge steel motor supports with adjustment screws for belt tensioning -
Structural parts are phosphatized and coated with Permatector.
BEARINGS, SHAFT, AND WHEEL: Heavy duty, self -aligning ball or roller pillow block bearings with
extended lubrication lines - Precision -ground, polished, solid steel shafts - Aircraft quality, heat treated
A356-T6 cast aluminum rotor hub and blades.
Options & Accessories:
NEMA Premium Efficient Motor - meets NEMA Table 12-12
Motor VFD Rated without Shaft Grounding Protection
Motor with Class B Insulation
Coated with Permatector, Concrete Gray-RAL 7023, Fan and Attached Accessories
Mounting Brackets - Base Mount
UUcUL-705 - "Power Ventilators"
MotorCover
Housing is sealed for outdoor use
CAPS 4.16.1923 Z:\Chad\winjobs\Sahale_gfcj Page 14 of 16
j GREENHECK
Building Value in Air.
Printed Date: 3/4/2015
Job: Sahale
Mark: AIR-04-EF-2
Model: VAB-30F17-II-30 Vane Axial Belt Drive Fan
END VIEW SHOWS FROM OUTLET END OF UNIT
37 00
13.50 - 1
13.50 —
t 1 1 33 63 '�
11
MAX cliiii
21.25 All)
. 27.00 --I
30.00--
Notes: All dimensions shown are in units of in.
6 MOUNTING SLOTS
Bolt Circle 0 32
Flange Hole 0 0.44
Quantity 8
CAPS 4.16.1923
Z:\Chad\winjobs\Sahale.gfcj Page 15 of 16
LGREENHECK
Building Value in Air.
Printed Date: 3/4/2015
Job: Sahale
Mark: AIR-04-EF-2
AMCA
CIMCa
WORLDWIDE
OERTIr'IED
RATIMS
AIR
PEnronma00E
AIR tfi�
movEm(AT '
MID COATROI .0c
Af5OCIATIOR 0,
IATERAATIOAAI.Inc .' 9
AMCA Licensed for Air Performance. Power rating (BHP/kW) includes transmission losses.
Greenheck Fan Corporation certifies that the model shown herein is licensed to bear the AMCA Seal. The ratings shown
are based on tests and procedures performed in accordance with AMCA Publication 211 and comply with the
requirements of the AMCA Certified Ratings Program. The AMCA Certified Ratings Seal applies to air performance
ratings only. Performance certified is for installation type D - Ducted inlet, ducted outlet. Performance ratings do not
include the effects of appurtenances (accessories) in the airstream. Power ratings (BHP/kW) include transmission losses.
CAPS 4.16.1923 Z:1Chad\winjobs\Sahale.gfcj Page 16 of 16
25X 2480
30.00
DETAIL 'A'
HCD-2250
PROCESS
AIR INLET
8X 1/4-20 THIS
3SPe
610 = .18.00
ATIEN
AIR CUTLET
V / VV / WEATHER H®
AND SCREEN
—1325 1/4-20 THOs
-- 363
,75— i2.75
14)5 1 �.
3SPe
3,00 = 9.00
.75 --iL75
DETAIL 'B'
13-1/2 FAN
PROCESS
AIR OUTLET
REACTNATIIN
MR OLET
V / VEA
NO) SCREEN
3319
RTNATIEW
AIR NIT
NOTES:
SS AIR OUTLET
SEE DETAIL
a94
1, CAPACITIES, ENERGY REQUIREMENTS AND FEATURES WILL BE ALTERED TO MATCH APPLICATIONS,
CONSULT TECHNICAL DATA SHEET AND MANUAL BEFORE INSTALLING OR OPERATING UNIT.
a BLOWER(S) ARE PROVIDED WITH DAMPER AND MANUAL LOCKING QUADRANT,
3,UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES
4,ANY ELECTRICAL AND/OR MECHANICAL REASSEMBLY IS THE RESPONSIBILITY OF OTHERS UNLESS
PRIOR ARRANGEMENTS HAVE BEEN MADE WITH MUNTERS. THIS INCLUDES DISASSEMBLY THAT WAS
NECESSARY TO FACILITATE SHIPPING.
5,SYSTEM SKID IS TO BE FULL PERIMETER SUPPORTED (IF SYSTEM SKID IS PROVIDED BY MUNTERS).
6,SYSTEM IS NOT DESIGNED FOR OPEN ROOF CURB MOUNTING.
7,REFER TO SECTION 110.26 IN THE NEC CODE BOOK FOR CLEARANCES AND REQUIREMENTS TO
ELECTRICAL PANELS. THESE REQUIREMENTS MAY IMPACT THE LOCATION OF THE SUPPLIED
EQUIPMENT, IT IS THE CUSTOMER'S RESPONSIBILITY TO PLAN THE LOCATION OF THIS EQUIPMENT
USING THE REQUIREMENTS SET FORTH IN NEC AND OTHER LOCAL CODES.
PROCESS
AIR OUTLET
<11
FAN
(VITA SSNARIAAL
BAWER)
ABLE
LIFTING S
APPROXIMATE VT. = 1000 LBS. PART NO, 88359-01
REV
CHANGE NOTES
DVN DVN APRVD APRVD
BY DATE BY DATE
0
30.31
50,44
4&94
RECOMENDED
ACCESS AREA
DISCONIIECT
SWITCH
HEATER I MAIN ES
COIRECTIDN VITNIN
301 FILTER
ACCESS CTIHIS
Fes----24A0 --1
IIiIIiIiiiIi.
.
■
IACCESS (KITH
ACCESS AREA
—43D0
CRITICAL ACCESS
AREA 131' HIGH
CTRICAL
ENCLOSURE
GAUGESN
STIED
PROCESS
DESICCANT BVSPEHEEL �V
ACCESS
AIR INLET
ACE 6 BYPASS
(ACCESS THIS SSD
ft
54,34
81,75
(VITH IWALAIUJFAN
DAMPER)
f tl
3-�
FEE aEWED FOR
CODE COMPLIANCE
APPROVED
JUL 2 9 2015
City of Tukwila
BUILDING DIVISION
RECEIVED
CITY OF TUKWILA
ilk 8 2015
'ERM T CENTER
CUSTOMER
Description
BURNS & McDONNELL
JOB N0' 21536837-01
GENERAL ARRANGEMENT HCD-2250-EA-SFBS
Tolerances, If not Indicated, accorcing for
See HUNTERS Doc.No. 160-010266-001
Sheet
1/1
Revlslon
0
Design by DATE
RAV 2/20/2015
ProJ Eng ckd DATE
BDC 2/20/2015
Electrical ckd DATE
DL 2/20/2015
Drawing / Part No
88359
Ih's use d Irm a arylmtht y dmmRihdlhhmire ar he eodudut oiNnns uo=gk udstrktlsbdeHdnkrea
domtodroaasWus rot a mmroU tto n vreprWaheiodkcr,,grswmrotsJ fgnh moggcfire.
1\41 mc0,0
NATIONAL REFRIGERATION AND
AIR CONDITIONING CANADA CORP.
159 ROY BLVD, PO BOX 2020
BRANTFORD, ON
CANADA N3T 5Y6
Order Item No: 1
TESB200H8-HT4B
ES -LINE SEMI -HERMETIC
CONDENSING UNITS -AIR
NATIONAL REFRIGERATION will furnish equipment in accordance
subject to its published warranty. Approval of this drawing signifies
provision of the job specifications. Any change made hereon by any
by NATIONAL REFRIGERATION at its
with this drawing and specifications, and
that the equipment is acceptable under the
person whomsoever subject to acceptance
home office.
DATE : 08 Jan 2015
PURCHASER : Burns & McDonnell
PROJECT :
SUBMITTED BY : Justin Smith
Dimensions shown are for standard unit less
options.
DIMENSIONS
DIMENSION A
45
17/32 in
DIMENSION B
75
7/8 in
DIMENSION C
45
3/4 in
DIMENSION D
13 in
DIMENSION E
DIMENSION F
DIMENSION G
0 in
DIMENSION H
CONNECTIONS
LIQUID
7/8 in
SUCTION
1 5/8 in
DRAIN
WATER
DISCHARGE
PAN LOOP
HOT GAS SIDE PORT
HOT GAS INLET
HOT GAS OUTLET
OTHER
SHIPPING WEIGHT
1005 Ib
REFRIGERANT CHARGE
RECEIVER CAPACITY
84 Ib
APPROVALS
(
(
C ®us
MEA
TOTES:
OP11ONAL AIR
DISCHARGE HOOD
AM) LEGS
75 7/8
3 / - 9Vl
col- 3 7/e"
PAG E
5
OF
8
NATIONAL REFRIGERATION AND
AIR CONDITIONING CANADA CORP.
159 ROY BLVD, PO BOX 2020
BRANTFORD, ON
CANADA N3T 5Y6
Order Item No: 2
TMP368MA-S4A-C
MEDIUM PROFILE
EVAPORATOR
NATIONAL REFRIGERATION will furnish equipment in accordance with this drawing and specifications, and
subject to its published warranty. Approval of this drawing signifies that the equipment is acceptable under the
provision of the job specifications. Any change made hereon by any person whomsoever subject to acceptance
by NATIONAL REFRIGERATION at its home office.
DATE : 08 Jan 2015
PURCHASER : Burns & McDonnell
PROJECT :
SUBMITTED BY : Justin Smith
Dimensions shown are for standard unit Tess
options.
DIMENSIONS
' DIMENSION A
118 1/4 in
DIMENSION B
34 in
DIMENSION C
36 in
DIMENSION D
DIMENSION E
DIMENSION F
DIMENSION G
0 in
DIMENSION H
CONNECTIONS
DISTRIBUTOR
7/8 in
SUCTION
1 5/8 in
DRAIN
3/4 in
WATER
DISCHARGE
PAN LOOP
HOT GAS SIDE PORT
HOT GAS INLET
HOT GAS OUTLET
OTHER
SHIPPING WEIGHT
349 Ib
REFRIGERANT CHARGE
14 Ib
RECEIVER CAPACITY
APPROVALS
c UC us(11)
JOTES:
3/4 NPT (14NPS)
11 7/8
DRAIN CONNECTION (302)
(608)
MINIMUM CLEARANCE
(15
367)—
ALL MODELS
r j> AIR THROW:
APPROX. 75 FEET
(23 METERS)
IN OPEN SPACE
a44
(1300',V4
(206)
8
4-
zX
ty
a
O.
0
0
0
(864)
(34
864) •1l
TOP VIEW
1
0
PAG E
8
OF
8
City of Tukwila
Department of Community Development
July 15, 2015
BRYAN GALVIN
4102 B PL NW
AUBURN, WA 98001
RE: Correction Letter # 1
MECHANICAL Permit Application Number M15-0086
SAHALE SNACKS - 3411 SOUTH 120TH PL
Dear BRYAN GALVIN,
Jim Haggerton, Mayor
Jack Pace, Director
This letter is to inform you of corrections that must be addressed before your development permit can be approved. All
correction requests from each department must be addressed at the same time and reflected on your drawings. I have
enclosed comments from the following departments:
BUILDING - M DEPARTMENT: Allen Johannessen at 206-433-7163 if you have questions regarding these
comments.
• (GENERAL NOTE)
PLAN SUBMITTALS: (Min. size 11x17 to maximum size of 24x36; all sheets shall be the same size. New revised
plan sheets shall be the same size sheets as those previously submitted.)
(If applicable) All Structural Drawings and structural calculations sheets to be stamped (original signed wet stamp,
not copied) by Washington State licensed architect, structural engineer or civil engineer.
(BUILDING REVIEW NOTES)
1. Two full sets of architectural plans were provided showing other construction and alterations unrelated to the
installation of the three mechanical units which makes plan review and inspections difficult and confusing. Please
only provide the plan sheets that are clear and specific for the installation of apparently three proposed mechanical
units or mechanical work related to this permit. Cloud all work related to this permit and include location of these
mechanical installations.
Please address the comments above in an itemized format with applicable revised plans, specifications, and/or other
documentation. The City requires that two (2) sets of revised plan pages, specifications and/or other documentation be
resubmitted with the appropriate revision block.
In order to better expedite your resubmittal, a 'Revision Submittal Sheet' must accompany every resubmittal. I have
enclosed one for your convenience. Corrections/revisions must be made in person and will not be accepted through the mail
or by a messenger service.
If you have any questions, I can be reached at 206-431-3655.
Sincerely,
Bill Rambo
Permit Technician
File No. M15-0086
6300 ,Snuthcenter Rnulevard Suite #Inn • Tukwila Wa.chinaton 9R1RR • Phone 206-431-3670 • Fax 206-431-3665
PERMIT COORD COPY
PLAN REVIEW/ROUTING SLIP
PERMIT NUMBER: M15-0086
PROJECT NAME: SAHALE SNACKS
SITE ADDRESS: 3411 S 120 PL
Original Plan Submittal
X Response to Correction Letter # 1
DATE: 07/22/15
Revision #
Revision #
before Permit Issued
after Permit Issued
DEPARTMENTS:
KU a i\,
Building Division 11
Public Works
Fire Prevention
Structural
Planning Division
Permit Coordinator
PRELIMINARY REVIEW:
Not Applicable ❑
(no approval/review required)
DATE: 07/23/15
Structural Review Required
REVIEWER'S INITIALS: DATE:
APPROVALS OR CORRECTIONS:
Approved
Corrections Required
Approved with Conditions
Denied
(corrections entered in Reviews) (ie: Zoning Issues)
DUE DATE: 08/20/15
Notation:
REVIEWER'S INITIALS:
DATE:
Permit Center Use Only
CORRECTION LETTER MAILED:
Departments issued corrections: Bldg ❑ Fire ❑ Ping ❑ PW 0 Staff Initials:
12/18/2013
PLAT COORD COPY
PLAN REVIEW/ROUTING SLIP
PERMIT NUMBER: M15-0086
PROJECT NAME: SAHALE SNACKS
SITE ADDRESS: 3411 S 120TH PL
X Original Plan Submittal
Response to Correction Letter #
DATE: 07/10/15
Revision # before Permit Issued
Revision # after Permit Issued
DEPARTMENTS:
Building Division j'jj Fire Prevention
Public Works ❑
Structural
Planning Division
Permit Coordinator
PRELIMINARY REVIEW:
Not Applicable
(no approval/review required)
DATE: 07/14/15
Structural Review Required
REVIEWER'S INITIALS: DATE:
El
APPROVALS OR CORRECTIONS:
Approved
Corrections Required
Approved with Conditions
Denied
(corrections entered in Reviews) (ie: Zoning Issues)
Notation:
DUE DATE: 08/11/15
REVIEWER'S INITIALS:
DATE:
Permit Center Use Only
CORRECTION LETTER MAILED:
Departments issued corrections: Bldg - Fire D Ping ❑ PW ❑ Staff Initials:
12/ 18/2013
City of Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206-431-3670
Web site: http://www.TukwilaWA.gov
REVISION
SUBMITTAL
Revision submittals must be submitted in person at the Permit Center. Revisions will not be accepted through
the mail, fax, etc.
Date:
0-0/F- Plan Check/Permit Number:
Response to Incomplete Letter #
Response to Correction Letter #
Revision # after Permit is Issued
Revision requested by a City Building Inspector or Plans Examiner
Project Name:
Project Address:
cre6
Contact Person: GLr/1 ' R/t//!i1 Phone Number: , j 7,7-7 -3/
Summary of Revision:
..i i � .,
/) %/2
z) e_ E t ter vAGGov- `ut s `cow a74j( i s,g" s"
Pt/e---S T _ steht ii� /'`avittesik. 5_.- i ,
We ' re f%:7e.-Ot,teS11..- /5 s of4 �. ( 7 7''h e (2..) - e' ` V
7
RECEIVED
CITY OF TUKWILA
JUL 222015
PERMIT CENTER
Sheet Number(s):
"Cloud" or highlight all areas of revision including date of revisit
Received at the City of Tukwila Permit Center by:
Entered in Permits Plus on _ 7
H:\Applications\rorms-Applications On Line\2010 Applications\7-2010 - Revision Submittal.doc
Revised: May 2011
UNIVERSAL REFRIGERATION T'
Page 1 of 2
Home Imcio en Espanol Contact
Search L&I
A-Z Index Help My Secure LSEI
Safety Claims & Insurance Workplace Rights Trades & Licensing
0 Washington State Department of
Labor & Industries
UNIVERSAL REFRIGERATION INC
Owner or tradesperson
Principals
GATES, CHRISTOPHER A, PRESIDENT
GALVIN, BRYAN S, VICE PRESIDENT
VERNON, GUY E
(End: 01/01/1980)
JACKSON, SHELDON G
(End: 01/01/1980)
OSENBAUGH, CHARLES R
(End: 01/01/1980)
RAEDER, STEVEN C, PRESIDENT
(End: 03/29/2012)
Doing business as
UNIVERSAL REFRIGERATION INC
WA UBI No.
600 599 723
PO BOX 614
AUBURN, WA98071-0614
253-939-5501
KING County
Business type
Corporation
Governing persons
BRYAN
GALVIN
CHRIS GATES;
License
Verify the contractor's active registration / license / certification (depending on trade) and any past violations.
Construction Contractor
License specialties
COMMERCIAUINDUSTRIAUREFRIG
License no.
UNIVERI159RF
Effective — expiration
12/06/1985— 04/01/2016
Bond
.................
AMERICAN STATES INS CO
Bond account no.
EX903622
Active.
Meets current requirements.
$6,000.00
Received by L&I Effective date
03/18/2002 12/06/2001
Expiration date
Until Canceled
Insurance
American Economy Insurance Co $1,000,000.00
Policy no.
01C179965210
https://secure.lni.wa.gov/verify/Detail.aspx?UBI=600599723&LIC=UNIVERI159RF&SAW= 7/31/2015