HomeMy WebLinkAboutPermit D15-0298 - AMARA POINTE APARTMENTS - BUILDING 4 REROOFAMARA POINTS APTS
14444 59 AVE S
D15-0298
City of Tukwila
• Department of Community Development
• 6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206-431-3670
Inspection Request Line: 206-438-9350
Web site: http://www.TukwilaWA.gov
DEVELOPMENT PERMIT
Parcel No: 3365901335 Permit Number: D15-0298
Address: 14444 59TH AVE S BLDG 4 Issue Date: 12/28/2015
Permit Expires On: 6/25/2016
Project Name: AMARA POINTE APTS - BLDG 4
Owner:
Name:
VIEWCREST WPIG L L C
Address:
1120 E TERRACE ST STE 300, SEATTLE,
WA, 98122
Contact Person:
Name:
BILL STEPHENS
Phone: (206) 767-2995
Address:
309 S CLOVERDALE ST, SUITE C-40 ,
SEATTLE, WA, 98108
Contractor:
Name:
B R D ROOFING INC
Phone: (206) 767-2995
Address:
309 S CLOVERDATE ST SUITE C40 ,
SEATTLE, WA, 98108
License No:
BRDROR1954BQ
Expiration Date: 1/18/2017
Lender:
Name:
VIEWCREST WPIG LLC
Address:
1120 E TERRACE ST SUITE 300,
SEATTLE, WA, 98122
DESCRIPTION OF WORK:
OVERLAY EXISTING ONE LAYER OF ROOFING WITH POLYGLASS ELASTOSHIELD TORCH DOWN ROOFING AND
INSTALL NEW EDGE METAL.
Project Valuation: $15,286.00 Fees Collected: $691.14
Type of Fire Protection: Sprinklers:
Fire Alarm:
Type of Construction: VB Occupancy per IBC: R-2
Electrical Service Provided by: TUKWILA FIRE SERVICE Water District: TUKWILA
Sewer District: TUKWILA SEWER SERVICE
Current Codes adopted by the City of Tukwila:
International Building Code Edition:
2012
National Electrical Code:
2014
International Residential Code Edition:
2012
WA Cities Electrical Code:
2014
International Mechanical Code Edition:
2012
WAC 296-466:
2014
Uniform Plumbing Code Edition:
2012
WA State Energy Code:
2012
International Fuel Gas Code:
2012
Public Works Activities:
Channelization/Striping:
Curb Cut/Access/Sidewalk:
Fire Loop Hydrant:
Flood Control Zone:
Hauling/Oversize Load:
Land Altering: Volumes: Cut: 0 Fill: 0
Landscape Irrigation:
Sanitary Side Sewer: Number: 0
Sewer Main Extension:
Storm Drainage:
Street Use:
Water Main Extension:
Water Meter: No
Permit Center Authorized Signature: Date:
f l!
I hearby certify that I have read and examined this permit and know the same to be true and correct. All
provisions of law and ordinances governing this work will be complied with, whether specified herein or not.
The granting of this permit does not presume to give authority to violate or cancel the provisions of any other
state or local laws regulating construction or the performance of work. I am authorized to sign and obtain this
development permit and agree to the conditi ttached to this permit.
Signature: Date:
Print Name:
This permit shall become null and void if the work is not commenced within 180 days for the date of issuance, or if
the work is suspended or abandoned for a period of 180 days from the last inspection.
PERMIT CONDITIONS:
1: 'BUILDING PERMIT CONDITIONS'
2: Work shall be installed in accordance with the approved construction documents, and any changes made
during construction that are not in accordance with the approved construction documents shall be
resubmitted for approval.
3: All permits, inspection record card and approved construction documents shall be kept at the site of work
and shall be open to inspection by the Building Inspector until final inspection approval is granted.
4: All construction shall be done in conformance with the Washington State Building Code and the
Washington State Energy Code.
5: Remove all demolition rubble and loose miscellaneous material from lot or parcel of ground, properly cap
the sanitary sewer connections, and properly fill or otherwise protect all basements, cellars, septic tanks,
wells, and other excavations. Final inspection approval will be determined by the building inspector based
on satisfactory completion of this requirement.
6: All construction noise to be in compliance with Chapter 8.22 of the City of Tukwila Municipal Code. A copy
can be obtained at City Hall in the office of the City Clerk.
7: Prior to final inspection for this building permit, a copy of the roof membrane manufacturer's warranty
certificate shall be provided to the building inspector.
8: VALIDITY OF PERMIT: The issuance or granting of a permit shall not be construed to be a permit for, or an
approval of, any violation of any of the provisions of the building code or of any other ordinances of the City
of Tukwila. Permits presuming to give authority to violate or cancel the provisions of the code or other
ordinances of the City of Tukwila shall not be valid. The issuance of a permit based on construction
documents and other data shall not prevent the Building Official from requiring the correction of errors in
the construction documents and other data.
10: Application of roof coverings with the use of an open -flame device or use of a propane fueled asphalt kettle
requires a separate permit from the Tukwila Fire Marshals Office located at 6300 Southcenter BI Suite 209
Tukwila, WA 98188. Telephone (206) 575-4407. There shall be not less than one multi -purpose portable
fire extinguisher with a minimum 2-A20-B:C rating and a charged, minimum diameter 5/8 diameter water
line(hose) on the roof being covered or repaired. (IFC 105.6.23, 3504.2.5, 3504.2.6)
9: Contact The Tukwila Fire Prevention Bureau to witness all required inspections and tests. (City Ordinances
#2436 and #2437)
11: Any overlooked hazardous condition and/or violation of the adopted Fire or Building Codes does not imply
approval of such condition or violation.
12: These plans were reviewed by Inspector 511. If you have any questions, please call Tukwila Fire Prevention
Bureau at (206)575-4407.
PERMIT INSPECTIONS REQUIRED
Permit Inspection Line: (206) 438-9350
1700 BUILDING FINAL"
0103 PRE-REROOF
CITY OF TUIM- .
Community Development Department
• Public Works Deparanent
• Permit Center
6300 Southcenter Blvd, Suite 100
Tukwila, WA 98188
hgp://www.TukwilaWA.gov
Building Peruus No.
Project No.
Date Application Accepted: [ �--Y4
Date Application Expires: �l
T
use
CONSTRUCTION PERMIT APPLICATION
Applications and plans must be complete in order to be accepted for plan review.
Applications will not be accepted through the mail or by fax.
"Please Print"
SITE LOCATION I
King Co Assessor's Tax No.:
Site Address: y y �U�i Sr F Suite Number: Floor:
Tenant
PROPERTY OWNER
Name:
Address:
City: State: Zip..
CONTACT PERSON — person receiving all project
communication
Name: r11
Address: ucj
G 10 l� oT
City:
State: y Zip:
Phone: ,9,t, �
- Z : ?44 ` W 3
Email:
V
GENERAL CONTRACTOR INFORMATION
Company Name:
Address: p
S
City: � 1 State: `i /� - Zip:
Phone: 06 _ T Bax:?6y tj .klig�
Contr Reg No.: 139,0 fj1 '7x Date:
Tukwila Business License No.:
New Tenant: [j .....Yes [-]..No
ARCHITECT OF RECORD
Company Name:
Architect Name:
Address:
City: State: Zip:
Phone: Fax:
Email:
ENGINEER OF RECORD
Company Name:
Engineer Name:
Address:
City: State: Zip:
Phone: Fax:
Email:
LENDER/BOND ISSUED (required for projects $5,000 or
greater per RCW 19.27.095)
Name:
Address:1120 Svc 7/R - yo
City: Statep /1 Zip�/, -Z Z
H:XAppliWions\Fmms-Applications On Line\2011 ApplicetiomTamit Application Revised - 8.9.11.docx
Revised: August 2011
bh
Page 1 of 4
BUILDING PERMIT INFORMATION • 5-431-3670
Valuation of Project (contractor's bid price): S I " 'z `Ob too Existing Building Valuation: $
Describe the scope of work (please provide detailed information):
_ �1 GUI C i, 7,
Will there be new rack storage? ..... Yes V.. No If yes, a separate permit and plan submittal will be required.
Provide All Building Areas in Square Footage Below
Existing
Interior Remodel
Addition to
Existing
Structure
New
Type of
Construction per
IBC
Type of
Occupancy per
1BC
1" Floor
2nd Floor
3 Floor
Floors thru
Basement
Accessory Structure*
Attached Garage
Detached Garage
Attached Carport
Detached Carport
Covered Deck
Uncovered Deck
PLANNING DIVISION:
Single family building footprint (area of the foundation of all structures, plus any decks over 18 inches and overhangs greater than 18 inches)
*For an Accessory dwelling, provide the following:
Lot Area (sq ft): Floor area of principal dwelling: Floor area of accessory dwelling:
*Provide documentation that shows that the principal owner lives in one of the dwellings as his or her primary residence.
Number of Parking Stalls Provided: Standard: Compact: Handicap:
Will there be a change in use? [I ....... Yes El ....... No If "yes", explain:
FIRE PROTECTION/FIAZARDOUS MATERIALS:
❑....... Sprinklers ❑....... Automatic Fire Alarm ❑ .......None ❑ .......Other (specify)
Will there be storage or use of flammable, combustible or hazardous materials in the building? ❑ ....... Yes ❑ .......No
If "yes, attach list of materials and storage locations on a separate 8-112" x 11 " paper including quantities and Material Safety Data Sheets.
SEPTIC SYSTEM
❑ .......On -site Septic System — For on -site septic system, provide 2 copies of a current septic design approved by King County Health
Department.
H:*pliations\Fomu-Applications On Line12011 Applicatiot"emtit Application Revised - 8-9-1 Ldocx
Revised: August 2011 Page 2 of 4
bh
PERMIT APPLICATION NOTES —
Value of Construction — In all cases, a value of construction amount should be entered by the applicant. This figure will be reviewed and is subject
to possible revision by the Permit Center to comply with current fee schedules.
Expiration of Plan Review — Applications for which no permit is issued within 180 days following the date of application shall expire by limitation.
The Building Official may grant one or more extensions of time for additional periods not exceeding 90 days each. The extension shall be
requested in writing and justifiable cause demonstrated Section 105.3.2 International Building Code (current edition).
I HEREBY CERTIFY THAT I HAVE READ AND EXAMINED THIS APPLICATION AND KNOW THE SAME TO BE TRUE UNDER
PENALTY OF PERJURY BY THE LAWS OF THE STATE OF WASHINGTON, AND I AM AUTHORIZED TO APPLY FOR THIS PERMIT.
BUILDING OWNER OR AUTWRIZED AGEN
Signature: Date: f �^
f#ff t �j
Print Name: IV ! (l—�? 2M ' ' f �v Day Telephone: 20
Mailing Address: J / ! dU; ' vl f 1, Srl i �e'`�'l� ail, d��/
City state zip
H:\Applicetimrs\Forms-Appticatiom On Une\2011 ApplicatimaTpmit Application Revised - 9-9-1l.docx
Revised: August 2011 Page 4 of 4
bb
DESCRIPTIONS ACCOUNT
PermitTRAK $2,339.98
D15-0298 Address: 14444 59TH AVE S BLDG 4 Apn: 3365901335 $691.14
DEVELOPMENT $670.94
PERMIT FEE
R000.322.100.00.00
0.00
$403.90
PLAN CHECK FEE
R000.345.830.00.00
0.00
$262.54
WASHINGTON STATE SURCHARGE
B640.237.114
0.00
$4.50
TECHNOLOGY FEE $20.20
TECHNOLOGY FEE
R000.322.900.04.00
0.00
$20.20
D15-0299 Address: 14438 59TH AVE S BLDG 1 Apn: 3365901335 $691.14
DEVELOPMENT $670.94
PERMIT FEE
R000.322.100.00.00
0.00
$403.90
PLAN CHECK FEE
R000.345.830.00.00
0.00
$262.54
WASHINGTON STATE SURCHARGE
6640.237.114
0.00
$4.50
TECHNOLOGY FEE $20.20
TECHNOLOGY FEE
R000.322.900.04.00
0.00
$20.20
D15-0300 Address: 14440 59TH AVE S BLDG 2 Apn: 3365901335 $957.70
DEVELOPMENT $929.66
PERMIT FEE
R000.322.100.00.00
0.00
$560.70
PLAN CHECK FEE
R000.345.830.00.00
0.00
$364.46
WASHINGTON STATE SURCHARGE
B640.237.114
0.00
$4.50
TECHNOLOGY FEE $28.04
TECHNOLOGY FEE R000.322.900.04.00 0.00 $28.04
TOTAL FEES PAID BY RECEIPT: R6775 . .
Date Paid: Thursday, December 03, 2015
Paid By: WILLIAM STEPHENS
Pay Method: CREDIT CARD 07568G
Printed: Thursday, December 03, 2015 11:12 AM 1 of 1 lorg? SYSTEMS
14
INSPECTION RECORD
G Retain a copy with permit
INSPECTION NO. PERMIT NO.
CITY OF TUKWILA BUILDING DIVISION
6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431-367
Permit Inspection Request Line (206) 438-9350
Pr ject:
Type f In pection: c
Address:
1 q q
[fat, Call
SpecialInstructions:
o d%
DAre tan: a.m.
r- P.M.
Requester:
Phone No:
Inspector: Date: -
REINSPECTION FEE REQUIRED. Prior to next inspection, fee must be
paid at 6300 Southcenter Blvd., Suite 100. Call to schedule reinspection.
iIVSPE+
Retain a
INS14tTION NO.
MON RECORD
copy with permi
t
PERMIT N0.
CITY OF TUKWILA BUILDING DIVISION
6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431-3670
Permit Inspection Request. Line (206) 438-9350
Pr "eft:_ � � �
T pe of I �p'ectjeq.
Address: Yh !�
Date Called:
Special Instructions:
�—
Date Wanted.: a.m
P.M.
Requested; b ��
fG
Phone No:
f3 7 C� E�
Approved per applicable codes. LJ Corrections required prior to approval.
�l5-ozq€�
12 Year (10 Year Non -Coated)*
InfytvF� LIMITED ROOFING MATERIAL WARRANTY
(*Warranty is self -executed by user)
Owner's Name: [�E"2 S C v rtr pAN Y
Owners Address: ! Z b � �' 5f It,, .�_- o O
City: State: i,4- � Zip: 1 g% 2 Z
Building Name: _A PARA J�d/nrTE
Building Address: City: 7_� It W/C4 Stater -�/� .
(� Zip:
Roofing Contractor Name: 15 20 Q/� x
Roofing Contractor -ctto�A,d�dress: 3 d l S !,
City' C t [ State: WA ' Zip: __.��!✓i CS —
Roofing Contractor Phone: 2 Q (2 7 7-2 Q s'- Polyglass Registered Contractor #: off
Polyglass Product(s) Used QLr f!�S ( S�^ r�{`� (IV tu
Project Size: 113g q ! 0 > . K , Square Feet Completion Date:
Roofing Specification Used: A/ViAr(AS f
TERMS AND CONDITIONS:
Definitions "POlyglass' shall mean Polyglass' U.S A, Inc. 1111 W. Newport Center Drive: Deed{eld Beach. FL 33442. ''owner shall mean the original party
listed above as Owner's Name whose building the Polyglass roof membrane product Is installed.
Polyglass warrants: the Polyglass' membrane to be free from manufacturing defects which affects the ability of the product to perform In a watertight manner
(herein considered defective) for the period of Twelve (12) years from the date of original installation of the roofing membrane for all Mineral Surfaced, Aluminum
and Acrylic coated membranes, Fifteen (15) years for Emulsion/Aluminum or Emulsion/Acrylic mated, smooth surfaced membranes will be limited to Ten num
years. This warranty is for the sole benefit at Owner described above ('0vmer1 and is not transferrable or assignable Warranty must be registered with Polyglass
to become in effect otherwise the Pclyglass membrane shall have warranty protection as provided by its Product Liability Coverage. A legible copy of this
Warranty and proof of purchase must be registered with Polyglass USA, Inc. Attn: Warranty Department 1111 W Newport Center Drive Deerfield Beach, FL 33422
within 90 days of the original date of purchase,
Should Pctyglass' membrane be deemed defective by Polyglass, as described above, Polyglass shall exercise the option to repair or replace such defective
materials, excluding any associated labor to perform these tasks. Polyglass' maximum liability, under any circumstances, shall not exceed the cost of the defective
membrane at time of claim; excluding all installation related labor costs; costs of flashing, metal work or other materials not supplied or furnished by Polyglass,
This sum shall be pro -rated at year Two (2) of its term, reduced by 1112; (1f15) far EmulsionrCoaled (1/10) for smooth surfaced remaining in the warranty period
and further reduced by any cost previously incurred by Polyglass for the repair or replacement of any Polyg ass materials under this warranty. Any such repair or
replacement to remedy leakage shall be owners SOLE AND EXCLUSIVE REMEDY against Poyglass.
Polyglass shall have no obligation based upon the following exclusions under this warranty:
1) Damage by natural disasters, Including but not limited to lightning, hail, gale force or other strong winds exceeding 8 on the BeanfOd Scale,
floods, hurricanes, tornadoes, wind launched debris, earthquakes or similar acts of god or natural causes;
2) Damage by willful of hegligeni arts, fire, vandalism, or other misuse,
3) Damage by use of materials not fumished by Polyglass;
4) Owner or lessee fails to use reasonable care in maintaining and reporting the Polyglass membrane or other required compOnents of the roofing
system.
5) Damage by structural failure, including, without limitation, settling or shifting of the building, or movement, cracli or deflection of the roof deck,
roof substrate, roof insulation, building design or construction, inadequate attic ventilation:
6) Damage by any chemical condition nor disclosed to Polyglass, of tragic or storage of r, 'Lerials or Infiltration of condensation or moisture i.,,
through or around the walls, roping. building structure of the underlying or surrounding areas;
7) Alterations or repairs made on or through the roof or objects (including, without limitation, machines, structures, fixtures, or utilities) are placed on
the roof without prior written authorization of Polyglass;
9) Metal work or other materials not furnished by Polyglass and used in the roofing system resulting in leaks:
) Poor workmanship in the application of materials as determined in Polyplass' sole judgment;
10) Failure to utilize Polyglass' latest instructions and recommendations as to installation procedures;
11) Damage resulting from lack of positive, proper or adequate drainage,
12) Loss in part or in whole of granule or other surfacing;
131 Damage or injury arising in any way from an actual or alleged discharge or release of any pollutant or waste, environmental or airborne
contaminates;
14) Damage or injury arising in any way from testing?sampling of undedaymlent, design and consulting errors or omissions.
1.5) Failure to register this warranty within 90 days Of purchase to Polyglass.
In addition to items 1.15 above, owner agrees that Polyglass shall have no responsibility whatsoever far bodily injury to any person or damage to the
structure or its contents directly or indirectly arising out of any defects in its roof underiayment or any other consequential or Incidental damages or attorneys fees,
Polyglass' sole responsibility is the repair or replacement of defective underlayment membrane that is directty related to leakage. This warranty does not include
the cost of removal of existing, or the cost of labor to repair or replace the defective membrane andfor overburden installed to the Polyglass membrane
Claim Procedure:
Polyglass shall have no obligation under this warranty unless Owner shall have promptly notified Polyglass in writlng along with attached Proof of Purchase
to Polyglass by registered or certified main- Direct all claims to Polyglass, U.S A. Inc. 1111 W Newport Center Clove, Deerfield Beach, Florida 33442; ATTN:
Warranty Depa invent. Any claim shall provide a ropy of warranty and detailed information of the leakage and alleged defect. Folyglass must receive such notice
within ten (110) days after discovery of the claimed defect.
Owner shall provide Polyglass, and its agents and employees, free, safe and reasonable access to the root during regular business hours during the term of
the warranty. Owner shall be responsibie for all costs related to safe and reasonable access to investigate claim.
Polyglass' g2od-faith determination of the source of leakage, damage, or alleged defect to the roof shall be exclusive and binding to owner.
Polyglass' failure at any time to enforce any of the terms and conditions of this warranty shall not be construed as a waiver of such provisions.
Polyglass reserves the right to discontinue or modify any of its products and shall not be liable to Owner es a result of any such discontinuance or
modification
THIS WARRANTY SUPERCEDES AND IS IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT
LIMITATION, WARRANTIES OF MEP.CHANTABLILITY AND FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY SHALL BE OWNER'S EXCLUSIVE
REMEDY AGAINST POLYGLASS OR ITS AFFILIATES, AND NEITHER POLYGLASS NOR ITS AFFILIATES SHALL BE LIABLE FOR ANY CONSEQUENTIAL
OR INCINDENTAL DAMAGES POLYGLASS' AGENTS HAVE NO AUTHORITY TO GIVE WARRANTIES BEYONC THOSE PRO'dIDED Ifd THS
WARRANTY.ALL RIGHTS AND DUTIES ARISING UNDER THIS WARRANTY SHALL BE GOVERNED BY FLORIDA LAW.
Warranty presented and determined as incomplete or inaccurate shall be considered null and void.
Ott .70t1
r �'� 981Gg
REVISIONS
No changes shn!! hi made to the scope
of wi hc• .k prior approval of
__•� Bi;ilcling Division.
will require a new plan submittal
I ,: « may inn-'t!de additional plan review fees. I
REVIEWED FOR
CODE COMPLIANCE
APPROVED
DEC 17 2015
�City of Tukwila
BUILDING DIVISION
�l l:iiL �..('.
!s subject to errors and omissions.
P.. 'l
C', • u,i ,,ra; 'Oun documents does not authorize
f;.y idopted' code or ordinance. Receipt
of pproo", ti' 16.1d Copy and conditions is acknowledged:
Date: /
^.SIT City of TuMia
' BUILDING DIVISION
-D FOR: ISI
to M-1chanical
-2str!caI
-,'jmbing
i! Gas Piping RECEIVED
CITY OF TUKWILA
`"j of Tukwila
? * - DEC 0 3 2015
D
PERMIT CENTER
04
ROOFING, INC.
309 S Cloverdale St, Suite C-40
Seattle, WA 98108
6-767.2995 Fax 206-763-5682
BRD Roofing to install a new Polyglass Elastosheild SBS torchdown roof to the existing
roofing. The new roof weighs 1.1 lbs/sq ft and the system has a class B fire rating.
The existing structure is: 2x8 ceiling joists on a 16" center, '/2" plywood deck, one layer
of fiberglass base sheet and one layer of smooth, black APP torch down. We will be
installing one layer of Polyglass Elastoshield SBS White, secured with screws and seam
plates on a 3' center.
We are roofing 3 apartment buildings in this complex. All have this same construction.
Amara Pointe Apartments
14438, 14440, 14444 59" Ave S
Tukwila, WA 98168
Thanks for your help!
Russ Kari
BRD Roofing
O 206-767-2995
C 206-786-6692
Des—o�98
REVI'EVViED FOR
CODE COMPLIANCE
APPROVED
DEC 17 2015
City of Tukwila
BUILDING DIVISION
RECEIVED
CITY OF TUKWILA
DEC 0 3 2015
PERMIT CENTER
of
TO: Brenda Hardison
The Neiders Company
6334 Rainier Ave S
Seattle, WA 98118
Tel:
PROPOSAL ACCEPTANCE
Service Address:
Proposal No.150506
309 S Cloverdale St, Suite C-40
Seattle, WA 98108
206-767-2995 Fax 206-763-5682
Amara Pointe Apartments
14438 591h Ave S
Tukwila, WA 98168
14444 Building
WORK ORDER: Polyglass Elastoshield SBS White
ROOF: 3,737 sq ft INSULATION:
PARAPETS: MASONRY/CHIMNEY:
SKYLIGHTS: GUTTERS:
METAL: New edge metal DOWNSPOUTS:
SIDING: OTHER:
SPECIFICATIONS:
1. Clean roof surface and remove perimeter edge metal.
2. Open up soft wood areas, replace any wet insulation and soft plywood and install new venting as
necessary.
3. Replace lead roof jacks and vents as necessary.
4. Install Polyglass Elastoshield SBS white to entire roof surface secured with screws and plates.
5. Install new brown perimeter edge metal secured with grommeted screws.
6. Remove and dispose of any job related debris.
Note: Plywood replacement at $50/hr + materials REVIEWED FOR
CODE COMPLIANCE
SCHEDULE: APPROVED
Roof schedules are subject to prior sales and weather. DEC 17 2015
GUARANTEE:
If leaks due to membrane failure do occur, BIRD Roofing, Inc. WILL RESPOND FO SEF IV'TUkWila
CALL AT NO CHARGE FOR A PERIOD OF 15 YEARS from the date of PROPOSA .BUILDING DIVISION
TERMS:
PAYMENTS WILL BE REQUIRED AS FOLLOWS:
Due upon receipt
Permits needed at additional cost.
Any wood replacement at additional cost.
PROPOSAL:
DATED: 5/11/15
BY:
Load $ 5,350
Phase 1 $ 9,936
TOTAL $ 15.286+ WSST
ACCEPTANCE:
RECEIVED
CITY OF TUKWILA
Authorized Signature DM 0 3 2015
OZ9 8 PERMIT CENTER
POLYGLASS V,S.A. INC.
Corporate Office
1111 Vl. Nevrpont Ceuta' Drive
Deerfield Beach, FL 33142
Tel(954).2334330 Fax(954).41S.wfS3
f.tanufactming Facilities:
ttA2LE70W PENUSYLVAUTA
55S Oal,ridge Road 18202
TO (800).894AS63 Fax (570) 38.1 3282
WMTER HAVUl FLORIDA
1731 Am_rlcan Superior 01vd.33880
TO (866).802.8017 Fax (1163).297.S058
IERMEY NEVADA
J SO Lyon Drive 89406
Tel (LDO).222.9782 fax (77S).575.2314
Email: tethnicehpolyglass.com
Vlehsite: %-mAv.poly8hss.us
November 9, 2015
Mr. Russ Kari
BRD Roofing
RE: Amara Pointe Apartments
14438, 14440 and 14444 591h Ave. S
Tukwila, WA 98168
ROOTING AND NVATERPROOFING SYSTEMS
G R O U P
Please be advised, Polyglass U.S.A., Inc. has reviewed the following system for the above named project:
• Existing BUR with an existing UL Class B assembly
• Power Wash and prime with an ASTM D-41 Asphalt Primer
• Polyglass Elastoshield TS G FR cap sheet membrane — Heat Fused
• Alternate cap sheet membrane — Polyglass Elastoflex VG FR — Heat Fused
Performance Requirements:
• UL Class B Fully Adhered — up to 1/2 " Incline — TGFU R 14571 - Maintenance and Repair Systems
Assembly # 2
Warranty: Twelve (12) Years
In consideration of the above information, a 12 Year Limited Roofing Material Warranty would apply when
installed to the aforementioned installation requirements and self -executed via the Polyglass Website. Please
ensure copies of any warranties are sent to the Polyglass Warranty Department.
Thank you for supporting Polyglass U.S.A. Inc.
Sincerely,
Anthony, J JWassa
Polyglass U.S.A., Inc.
Technical Services Administrator
tnlasso(ci polvtloss, corn
REVIEWED FOR
)DE COMPLIANCE
APPROVED
DEC 17 2015
City of Tukwila
BUILDING DIVISION
b k S �m- G) q6
RECEIVED
CITY OF TUKW
ILA
DEC 032015
PERMIT CENTER
aS
s
r ra
rs5t �;� ra• �
c7'
POLYFLEXO
POLYF LIEN" G
72E POLYFLEX® and POLYFLEV G are premium, polyester reinforced APP
C modified bitumen roofing membranes specially designed for heat welded
applications.
POLYFLEX® membranes are also used as flashing membranes in all
(„ ) applicable specifications, in accordance with recommended installation
L J Lpractices.
0 Polyester reinforced, POLYFLEX® membranes are lightweight
V(approx. 1 lb./sq.ft), weather resistant and durable.
CTop surface of membrane is sanded or granular (available in a variety of
colors) except at selvage edges, and provided with a patented, granule -free
1= roll end, FAsnapT" (U.S. Patent numbers 5766729, 5843522 plus other
patents pending).
I�t,.
cn (11 '1 MIAMI•DADE FM O REVIEWED E
o =1= APPROVED CODE COMPLI
o Q APPROVE
• ASTM D 6222 Type I hh
N • DADE County Approved DEC 17 20
CL • Factory Mutual Approved Report #J.I.2W7A7 AM
CIE • ICBO ES # ES5494
• SBCCI (File #R9760) C� Of �UIM
O' • UL Classified (File #R14571(N) for use in class A, B or rg L&4V DIV
in the latest UL "Roofing Materials and Systems Direct V
POLYFLEX® and POLYFLEX® G membranes are specifically
designed for heat welding or to be applied with cold adhesive,
when sand backed.
Applications include new roofing, re -roofing, re-cover and BUR
repair installation.
Directly over an acceptable substrate, base -ply sheet, apply one or more
layers of POLYFLEXO or a single layer of POLYFLEXO G.
pZPOLYFLEX® membranes shall be set with min. 3" side and min. 6" end
= O laps. The rolled membranes shall be set and unrolled approximately 6' to
V jQ align sheets. A propane torch flame shall be applied to the exposed, outer
��� surface of the roll (the membrane underside) until the surface reaches the
�� I� Q �� proper application temperature (generally between 350 to 400 degrees F).
he roll is then gradually unrolled to create a continuous heat weld
rr between the membrane and substrate. The remainder of the roll is re -rol-
led and installed in the same manner. There should be approx. 1/4" to 3/8"
Qod bleed out of the melted membrane (compound) at the laps. Laps shall be
�QLYW top rolled using a minimum 6" wide roller applying pressure imme ely
after heat welding. IN,�_ A& — n
i3
:qN
[FLAT41R00F4WI rHIN
PEDESTRIAN ACCESS
FCATAR00F�WITH,
LIMITED`ACCESS
�PROFlLEDJJ
METAODECKS,
INDUSTRIAL
SAWrOUTH ROOFS,
CURVED ROOFS
RENEWAL WATERPROOFING
CONVERING ONLY
RELINING WITH INSULATING
MATERIAL
SPECIAL REROOFING WORK,
ASTMD 6222
Type I
�
(Dimensions, masses and physical properties
ofAPP modified sheet materials using Polyester Reinforcements)
TEST METHOD
TECHNICAL
VALUES
VALUES }}
DESCRIPTION
Grade S
Grade G
ASTM D5147 Sec 5
Thickness, nominal, mils (mm)
160 (4.0)*
180 (4.5?
ASTM D228 Sec 7
Net mass/unit area, min, IbsI100 ftt (g/ml)
70 (34.1)
85 (41.5)
ASTM D5147 Sec 16
Bottom coating thickness, min, mils(mm)
30 (0.76)
30 (0.76)
ASTM D5147 Sec 6
Maximum load at 73.4 ± 3.6eF (23 ± 2'Q
•
MD & XMD, min, before and after heat
conditioning, lbf/in. (kN/m)
70 (12.3)
70 (12.3)
ASTM D5147 Sec 6
Elongation at 73.4 ± 3.6eF (23 ± 2aC),
MD & XMD, min, at maximum load,
before and after heat conditioning, %
40
40
ASTM D5147 Sec 6
Maximum load at 0 ± 3.6'F 08 ± 2eC),
MD & XMD, min, lbFin. (kNlm)
_ 80 (14)
80 (14)
ASTM D5147 Sec 6
Elongation at 0 ± 3.6'F (48 ± 2eC), L
MD & XMD, min, at maximum load, %
_ 10 N
10
ASTM D5147 Sec 6
Elongation at 5% of maximum load
73.4 ± 3.6'F (23 ± 2'C), MD & XMD, min, %
40
40
ASTM D5147 Sec 7
Tear strength at 73.4 ± 3.6'F (23 ± 2'C),
min, lbf (N)
90 (400)
90 (400)
ASTM D5147 Sec 11
Low temperature flexibility, max,
before and after heat conditioning, aF (C)
+32 (0)
+32 (0)
ASTM D5147 Sec 10
Dimensional stability, max, %
0.5
0.5
ASTM D5147 Sec 15
High temperature stability, aF ('C) min
260 (126)
260 (126)
ASTM D5147 Sec 14
Granule embedment, max
N/A
2
ASTM D5147 Sec 9
Water absorption, % max
3.2
3.2
ASTM D5147 Sec 9
Water absorption, % min
1.0
1.0
ASTM D5636
Low temperature unrolling, eF ('C) max
41(5)
41(5)
The properties in this table are manufactured' unless otherwise noted. * Meets
minimum thickness requirements of applicable ASTM standard.
PRODUCT NAME
APPROWEIGHT I
I VERSION Ib/
ROLL SIZE I ROLLS/PALLET I COVERAGE
POLNTLEX•
4 92
32'10'073-31 00taxlm) 23
100 ft,
•
POLYFLEX• DB
4 92
32'10"013/8"(10mx1m) 23
100ft,
POLYFLEX•
5 112
32110"013/8"(10mx1m) 20
100fi°
•
POLYFLEX•G
4.5 104
32110"x3'3-3/8'(10mx1m) 20
100ft"
- All matcrials should be stored
in their original unopened packaging.
M
•
- Roll goods shall be stared
- Store all roofing materials
on end on a clean flat surface.
in a dry place, on raised platforms, out ofdirect exposure
to the elements until time. ofapplication.
This requirement applies
equally to rooftop materials, temporarily on the roof before
installation.
•
•
- Star mbranes at room
- Materials shall be stored
temperature wherever possible, until immediately prior to installing the roll.
in a tidv and safe way in order to avoid exceeding the allowable live load of the storage area.
- Do not double stuck pallets of PGLYGLASSO membrane.
t urn r r o tandard
pir ductioa rid6 Div n n ood faith
in'the plicSb mat ufac trio nd
testiolerancessP_OLYGLASSA
ncll[reserve sjthe]rightttomproveTan
haits'(productseat n t nae NMlota
nrior atice OLYGLASS• SA, n an-
otttheld�r. sponsible:f
trode or�the� se fit
roductondition beyond its
ottrol
Top surface protected with granules available in a variety of colors
Black Brown Buff Green Grey Oak Weatherwood White Red
POLYGLASS USA, Inc.: Corporate Once & A1anufacturing Facility Fernley, Nevada 89408
�•l / �( yI , Phone (775) 575-6007 - Fax (775) 575-2314 - Toll Free (800) 222-9782
J `CI , 1 r JJ ManufachirbW Facility Hazleton, Pennsylvania 18202 - Phone (570) 384-1230 - Fax (570) 384-3282
Toll Free (800) 894-4563 - www.polvglass.com - e-mail:customerservice@polyglass .corn
WATBRPROOPINC MATERIALS AND INSULATING SYSTEMS POINGLASS S.p.A. - Warldwide Headquarters (Italy) - MSP Scotland Ltd. - Subsidiary (Great Britain)
City of Tukwila Allan Ekberg, Mayor
Department of Community Development Jack Pace, Director
6/1/2016
BILL STEPHENS
309 S CLOVERDALE ST, SUITE C-40
SEATTLE, WA 98108
RE: Permit No. D15-0298
AMARA POINTE APTS - BLDG 4
14444 59 AVE S
Dear Permit Holder:
In reviewing our current records, the above noted permit has not received a final inspection by the City of Tukwila Building
Division. Per the International Building Code, International Mechanical Code, Uniform Plumbing Code and/or the National Electric
Code, every permit issued by the Building Division under the provisions of these codes shall expire by limitation and become null
and void if the building or work authorized by such permit has not begun within 180 days from the issuance date of such permit, or if
the building or work authorized by such permit is suspended or abandoned at any time after the work has begun for a period of 180
days. Your permit will expire on 7/31/2016.
Based on the above, you are hereby advised to:
1) Call the City of Tukwila Inspection Request Line at 206-438-9350 to schedule for the next or final inspection. Each
inspection creates a new 180 day period, provided the inspection shows progress.
alic
2) Submit a written request for permit extension to the Permit Center at least seven(7) days before it is due to expire.
Address your extension request to the Building Official and state your reason(s) for the need to extend your permit.
The Building Code does allow the Building Official to approve one extension of up to 180 days. If it is determined that your
extension request is granted, you will be notified by mail.
In the event you do not call for an inspection and/or receive an extension prior to 7/31/2016, your permit will become null and void
and any further work on the project will require a new permit and associated fees.
Thank you for your cooperation in this matter.
Sincerely,
4a;
Rachelle Ripley
P Y
Permit Technician
File No: D 15-0298
6300 Southcenter Boulevard Suite #100 • Tukwila, Washington 98188 • Phone 206-431-3670 • Fax 206 331-3665
PERMIT GQORD COPY
PLAN REVIEW%ROUTING SLIP
PERMIT NUMBER: D15-0298
DATE: 12/03/15
PROJECT NAME: AMARA POINTE APTS - BLDG 4
SITE ADDRESS: 14444 59 AVE S
X Original Plan Submittal Revision # before Permit Issued
Response to Correction Letter # Revision # after Permit Issued
DEPARTMENTS:
!w kwI✓ I
Building Division 16
Public Works ❑
PRELIMINARY REVIEW:
Not Applicable ❑
(no approval/review required)
MA Avis
Fire Prevention Planning Division ❑
Structural ❑ Permit Coordinator IP
DATE: 12/08/15
Structural Review Required ❑
REVIEWER'S INITIALS: DATE:
APPROVALS OR CORRECTIONS: DUE DATE: 01/05/16
Approved ❑ Approved with Conditions
Corrections Required ❑ Denied ❑
(corrections entered in Reviews) (ie: Zoning Issues)
Notation:
REVIEWER'S INITIALS:
DATE:
Permit Center Use Only
CORRECTION LETTER MAILED:
Departments issued corrections: Bldg ❑ Fire ❑ Ping ❑ PW ❑ Staff Initials:
12/18/2013
B R D ROOFING INC
Page I of 2
Home: 1nicjo e.n Tspar5ol Contact.
Safety
Washington State Department of
Labor & Industries
B R D ROOFING INC
Owner or tradesperson
Principals
KIRKPATRICK, NORMAN DALE, PRESIDENT
STEPHENS, WILLIAM
THOMAS, TREASURER
KART, RUSSELL ALLEN, AGENT
Doing business as
B R D ROOFING INC
WA UBI No,
602 452 763
License
Search L&I
A-Z Index Help My securc L8.0.
Claims & Insurance Workplace Rights Trades & Licensing
309 S CLOVERDALE ST STE C40
SEATTLE, WAS8108
206-767-2995
KING County
Business type
Corporation
Governing persons
BILL
STEPHENS
NORMAN DALE KIRKPATRICK;
RUSS KART;
Verify the contractor's active registration / license / certification (depending on trade) and any past violations.
Construction Contractor Active.
.................. _.............._.......................................
Meets current requirements.
License specialties
ROOFING
License no.
BRDROR1954BQ
Effective — expiration
01/18/2005— 01/18/2017
Bond
.................
CBIC
$6,000.00
Bond account no.
SF9469
Received by L&I
Effective date
01/18/2005
01/14/2005
Expiration date
Until Canceled
Insurance
................._....
First Mercury Ins Cc
$1,000,000.00
Policy no.
0000003984-01
Received by L&I
Effective date
12/29/2014
01/14/2012
Expiration date
01/14/2016
Insurance history
https:Hsecure.Ini.wa.gov/verify/Detail.aspx?UBI=602452763&LIC=BRDRORI954BQ&SAW= 12/28/2015