HomeMy WebLinkAboutPermit EL15-0469 - MAIL CHIMP - EXTEND POWER TO SERVER CABINETSMAIL CHIMP
3355SI20 TH PL 100
EL15-0469
City of Tukwila
• Department of Community Development
• 6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206-431-3670
Inspection Request Line: 206-438-9350
Web site: http://www.TukwilaWA.gov
ELECTRICAL PERMIT
Parcel No:
1023049082
Permit Number: EL15-0469
Address:
3355 S 120TH PL 100
Issue Date: 6/10/2015
Permit Expires On: 12/7/2015
Project Name:
MAILCHIMP
Owner:
Name:
SABEY CORPORATION
Address:
4TH FLOOR 12201 TUKWILA INTL
BLVD, SEATTLE, WA, 98168
Contact Person:
Name:
JOHN MCBRIDE
Phone: (253) 234-2853
Address:
600 WASHINGTON AVE S , KENT, WA,
98035
Contractor:
Name:
HOLMES ELECTRIC CO
Phone: (253) 479-4000
Address:
18215 OLYMPIC AVE S , TUKWILA, WA,
98188
License No:
HOLMEEC549BH
Expiration Date:
Lender:
Name:
Address:
DESCRIPTION OF WORK:
Valuation of single family: $0.00
Fees Collected: $2,128.16
Valuation of mf/comm: $100,148.00
Type of Work: TENANT IMP
Electrical Service Provided by: SEATTLE CITY LIGHT
Water District: 125
Sewer District: VALLEY VIEW SEWER SERVICE
Current Codes adopted by the City of Tukwila:
International Building Code Edition:
2012
National Electrical Code:
2014
International Residential Code Edition:
2012
WA Cities Electrical Code:
2014
International Mechanical Code Edition:
2012
WAC 296-46B:
2014
Uniform Plumbing Code Edition:
2012
WA State Energy Code:
2012
International Fuel Gas Code:
2012
Permit Center Authorized Signature:
W
Date:
I hearby certify that I have read and examined this permit and know the same to be true and correct. All
provisions of law and ordinances governing this work will be complied with, whether specified herein or not.
The granting of this permit does not presume to give authority to violate or cancel the provisions of any other
state or local laws regulating construction or the performance of work. I am authorized to sign and obtain this
development permit and agree to the conditions attached to this permit. /-
Signature: ,/ , `n 1,, Date:
L"► (� y
Print Name: i rJ�nvl✓V' ➢"� 11
This permit shall become null and void if the work is not commenced within 180 days for the date of issuance, or if
the work is suspended or abandoned for a period of 180 days from the last inspection.
PERMIT CONDITIONS:
1: 'ELECTRICAL PERMIT CONDITIONS'
2: A copy of the electrical work permit shall be posted or otherwise made readily accessible to the Electrical
Inspector at each work site.
3: Approved plans shall be maintained at the construction site and shall be readily available to the Electrical
Inspector.
4: All electrical work shall be in accordance with NFPA 70 - NEC, and requirements for electrical installations,
Chapter 296-46B WAC.
5: When any portion of the electrical installation is to be hidden from view by permanent placement of parts
of the building, such equipment shall not be concealed until it has been inspected and approved by the
Electrical Inspector.
6: The issuance of an electrical work permit shall not be construed to be a permit for, or an approval of, any
violation of the provisions of the electrical code or other ordinances of the jurisdiction. Permits or related
documentation that presumes to grant this authority are therefore not valid.
7: Any change in the scope of work described by the electrical work permit shall require additional work
permits. Where approved plans have been issued, revisions to the plans and additional review may be
required.
PERMIT INSPECTIONS REQUIRED
Permit Inspection Line: (206) 438-9350
2100 ELECTRICAL FINAL
7003 ROUGH -IN ELECTRICAL
7002 SERVICE
7001 UNDERGROUND/SLAB
CITY OF TUKWILA
Community Development Department
Permit Center
• 6300 Southcenter Blvd., Suite 100
Tukmila, WA 98188
" http://�aww.TulwilaWA.gov
Electrical Permit No. I�,5 _ ()k){ng
Project No.
Date Application Accepted: ,
Date Application. Expires:
f
use
ELECTRICAL PERMIT APPLICATION
Applications and plans must be complete in order to be accepted for plan review
Applications will not be accepted through the mail or by fax.
"Please Print" *
SITE LOCATION I
King Co Assessor's Tax No.: 910651979
Site Address: 3355 South 120tb ST Suite Number: n/a Floor: FIRST
Tenant Name: Mail Chimp Job # 5027 New Tenant: ®.....Yes ❑..No
PROPERTY OWNER
Name: SABEY COMPANY
Address: 1.2201 TUKWILA INTERNATIONAL BL
City: SEATTLE State: WA Zip: 981.68
CONTACT PERSON — person receiving all project
communication
Name: JOHN MCBRIDEjob.n.mcbride@bolmes.com
Address: 600 WASHINGTON AVE S
City: KENT State: WA Zip: 98003
Phone: (253) 234-2853 Fax: (253) 234-2923
Email:
ELECTRICAL CONTRACTOR INFORMATION
Company Name: HOLMES ELECTRIC
Address: 600 WASHINGTON AVE S
City: KENT State: WA Zip: 98005
Phone: (253) 479-4000 Fax: (252) 234-2900
Contr Reg No' HOLMEC549BH Exp Date: 10/31 /2016
Tukwila Business License No.; BUS-0993602
Valuation of Project (contractor's bid price): $ 100,148
Scope of Work (please provide detailed information): Extend power from existing distribution system to new
server cabinets for mail chimp tenant
Will service be altered? ❑ Yes m No
Type of Use: Telecom, data center
Type of work:
❑ New ❑ Addition ❑ Service Change
❑ Low Voltage ❑ Generator ❑ Firc Alarm
Property Served by:
❑ Puget Sound Energy LZ Seattle City Light
H:WpplicationsWonns-Applications On Line\2014 Apphc tions\Elmbrical Permit Application Revised 1-1-14.docz
Revised: January 2014
bh
Adding more than 50 amps? (1 Yes ❑ No
❑ Remodel m Tenant Improvement
❑ Telecommunication ❑ Temporary Service
Page ] of 2
RESIDENTIAL
NEW RESIDENTIAL SERVICE
❑ New single family dwellings...................................$152.85
(including an attached garage)
❑ Garages, pools, spas and outbuildings ........................$81.90 ea
❑ Low voltage systems
(alarm, furnace thermostat) ................................ $59.85 ea
RESIDENTIAL REMODEL AND SERVICE CHANGES
❑
Service change oralteration ......................................$81.90
(no added/altered circuits)
❑
Service change with added/altered circuits.................$81.90
number of added circuits .......................
$11.55 ea
❑
Circuits added/altered without service change ...........
$54.60
(up to 5 circuits)
❑
Circuits added/altered without service change ...........$54.60
(6 or more circuits) ...............................................
$7.65 ea
❑
Meter/mast repair .......................................................
$68.25
❑
Low voltage systems .................................................
$59.85
(alarm, furnace thermostat)
PERMIT APPLICATION NOTES -
MULTI -FAMILY AND COMMERCIAL
Fees are based on the valuation of the electrical contract.
MISCELLANEOUS FEES
❑
Temporary service (residential) .................................
$65.00
❑
Temporary service (generator) ...................................
$80.90
❑
Manufactured/mobile home service ...........................
$86.25
(excluding garage or outbuilding)
❑
Carnivals....................................................................$80.60
Number of concessions .........................
$10.80 ea
Each ride and generator truck ...............
$10.80 ea
***EFFECTIVE JANUARY 1, 2014.EACH
PERMIT WILL BE ASSESSED A 5%
TECHNOLOGY FEE***
Value of Construction — In all cases, a value of construction amount should be entered by the applicant. This figure will be reviewed and is subject
to possible revision by the Permit Center to comply with current fee schedules.
Expiration of Plan Review — Applications for which no permit is issued within 180 days following the date of application shall expire by limitation
The Building Official may grant one extension of time for an additional period not to exceed 90 days. The extension shall be requested in writing
and justifiable cause demonstrated.
I HEREBY CERTIFY THAT I HAVE READ AND EXAMINED THIS APPLICATION AND KNOW THE SAME TO BE TRUE UNDER
PENALTY OF PERJURY BY THE LAWS OF THE STATE OF WASHINGTON, AND I AM AUTHORIZED TO APPLY FOR THIS PERMIT.
BUILDING OWNER OR ELECTRICAL CONTRACTOR:
Signature: r7 G Date: S 2
Print Name: 6 Day Telephone:_
Mailing Address: COO Lu a5 �r.,oie��u %�v� S 1e -A Lo A 9 8037-_
City State Zip
H:WpplicationsTorms-Applications On Line\2014 ApplicationsMectricul Permit Application Revised I-1-14.docx
Revised: January 2014
bh
Page 2 of 2
DESCRIPTIONS
PermitTRAK
ACCOUNT QUANTITY
PAID
$1,718.90
EL15-0469 Address: 3355 S 120TH PL 100
Apn: 1023049082
$1,718.90
ELECTRICAL
$1,637.05
PERMIT FEE MULTI-FAM/COMM
R000.322.101.00.00
0.00
$1,637.OS
TECHNOLOGY FEE
$81.85
TECHNOLOGY FEE
TOTAL FEES PAID1
R000.322.900.04.00 0.00
$81.85
• 1
Date Paid: Wednesday, June 10, 2015
Paid By: HOLMES ELECTRIC
Pay Method: CHECK 067604
Printed: Wednesday, June 10, 2015 3:57 PM 1 of 1
rpwSY57EM5
Date Paid: Tuesday, May 26, 2015
Paid By: HOLMES ELECTRIC
Pay Method: CHECK 067476
Printed: Tuesday, May 26, 2015 3:34 PM 1 of 1
C111SYS7EM5
INSPECTION RECORD
Retain a copy with permit��
INSPECTION NO. PERMfT N0.
CITY OF TUKWILA BUILDING DIVISION
6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431-3670
Permit Inspection Request Line (206) 438-9350
Project: !
Type of Inspection:
I.
Address: `
2-o P11.
Date Called:
Special Instructions:
Date Wanted: a.m.
( M.
Requester:
Phone No:
, o 24&
Approved per applicable codes. El Corrections required prior to approval.
IInspector: N lhlI / lle;14— IDate: orb 1,1�
REINS PECTION' FEE REQUIRED. Prior to next inspection, fee must be
paid at 6300 Southcenter Blvd., Suite 100. Calt to schedule reinspection.
INSPECTION RECORD
Retain a copy with permit oLO
INSPECTION NO. PERMIT NO.
CITY OF TUKWILA BUILDING DIVISION'
6300 Southcenter Blvd., #100, Tukwila. WA 98188 (20 A 431-3670
Permit Inspection Request Line (206) 438-9350 /(
Project: OMType
of Inspection
Address:
35�—S:12-0 c. .
Date Called:
Special Instructions:
Date Wanted: yLo a.m
Requester:
Phone No:
Approved per applicable codes. Corrections required prior to approval.
COMMENTS:
Inspector: Date: �� O&
REINSPECTION FEE REQUIRED. Prior to next inspection, fee must be
paid at 6300 Southcenter Blvd., Suite 100. Call to schedule reinspection.
/ INSPECTION RECORD
Retain a copy with permit
INSPECTION NO. PERMIT N0.
CITY OF TUKWILA BUILDING DIVISION
6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431-3670
Permit Inspection Request Line (206) 438-9350 r
Project: 4AIL4_AJp
Type of Inspection:
Address:
Date Called:
Special Instructions:
Date Wanted: a.
p.m.
Requester: ��`1/`► `
Phone No:
❑ Approved per applicable codes. LJ Corrections required prior to approval.
U paid at 6300 Southcenter Blvd., Suite 100. Call to schedule reinspection.
FXLE CMG, ,
pmtP"A";o. ;ww^
HOLMES ELECTRIC
PROJECT: MAIL CHIMP
PANEL: PDC42-BD2.1
LOCATION: Suite 2
AMPS: 400
VOLTS: 120/208
PHASE: 3
WIRE: 4
A.I.C.: 10K
CK1
NO. CIRCUIT NAME
PANELBOARD SCHEDULE
DATE: 5/15/15/
SECTION:
x MAIN LUG ONLY ISO GROUND BUS
MAIN CIRCUIT BREAKER BONDED GROUND BUS
MAIN FUSE FEED THROUGH
FLUSH MOUNTED TOP FEED
SURFACE MOUNTED BOTTOM FEED
LOAD BRK BRK LOAD CKT
KVA A/PH A/PH KV"A CIRCUIT NAME NO.
1
3
5
7
9
1 I
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
Rack #1
1.25
30
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
30
1.25
Rack # 2
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
Rack #1
1.25
30
30
1.25
Rack # 2
Rack #3
1.25
30
30
1.25
Rack #4
Rack #3
1.25
30
30
1.25
Rack #4
Rack #5
1.25
30
30
1.25
Rack #6
Rack #5
1.25
30
30
1.25
Rack #6
Rack #7
1.25
30
30
1.25
Rack #8
Rack #7
1.25
30
30
1.25
Rack #8
Rack #9
1.25
30
30
1.25
Rack #10
Rack #9
1.25
30
30
1.25
Rack #10
Rack #11
1.25
30
30
1.25
Rack #12
Rack #11
1.25
30
30
1.25
Rack #12
Rack #13
1.25
30
30
1.25
Rack #14
Rack #13
1.25
30
30
1.25
Rack #14
Rack #15
1.25
30
30
1.25
Rack #16
Rack #15
1.25
30
30
1.25
Rack #16
Rack #17
1.25
30
30
1.25
Rack #18
Rack #17
1.25
30
30
1.25
Rack #18
SPARE
30
30
SPARE
SPARE
30
30
SPARE
PHASE A LOAD (KVA) :
PHASE B LOAD (KVA) :
PHASE C LOAD (KVA) :
15.0
15.0
15.0
45.0
54.2
TOTAL LOAD (kVA) SEC 1
CONNECTED (AMP) SEC 1
DEMAND (kVA)
DEMAND (AMP)
REMARKS:
RECEIVED
CITY OF TUKWILA
MAY 2 6 2015
EL I o
9 6 q PERMIT CENTER
�r
HOLMES ELECTRIC
PROTECT: MAIL CHIMP
PANEL: PDC42-DB2.1
LOCATION: Suite 2
AMPS: 400
VOLTS: 1201208
PHASE: 3
WIRE: 4
A.I.C.: 10K
CKT
NO. CIRCUIT NAME
PANELBOARD SCHEDULE
DATE: 5/15/15/
SECTION:
x MAIN LUG ONLY ISO GROUND BUS
MAIN CIRCUIT BREAKER BONDED GROUND BUS
MAIN FUSE FEED THROUGH
FLUSH MOUNTED TOP FEED
SURFACE MOUNTED BOTTOM FEED
LOAD BRK BRK LOAD CKT
KVA A/PH AIPH KVA CIRCUIT NAME NO.
i
3
5
7
9
I I
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
Rack #1
1.25
30
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
30
1.25
Rack # 2
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
J2
34
36
J8
40
42
Rack #1
1.25
30
30
1.25
Rack # 2
Rack #3
1.25
30
30
1.25
Rack #4
Rack #3
1.25
30
30
1.25
Rack #4
Rack #5
1.25
30
30
1.25
Rack #6
Rack #5
1.25
30
30
1.25
Rack #6
Rack #7
1.25
30
30
1.25
Rack #8
Rack #7
1.25
30
30
1.25
Rack #8
Rack #9
1.25
30
30
1.25
Rack #10
Rack #9
1.25
30
30
1.25
Rack #10
Rack #11
1.25
30
30
1.25
Rack #12
Rack #11
1.25
30
30
1.25
Rack #12
Rack #13
1.25
30
30
1.25
Rack #14
Rack #13
1.25
30
30
1.25
Rack #14
Rack #15
1.25
30
30
1.25
Rack #16
Rack #15
1.25
30
30
1.25
Rack #16
Rack #17
1.25
30
30
1.25
Rack #18
Rack #17
1.25
30
30
1.25
Rack #18
SPARE
30
30
SPARE
SPARE
30
30
SPARE
PHASE A LOAD (KVA) :
PHASE B LOAD (KVA) :
PHASE C LOAD (KVA) :
15.0
15.0
15.0
45.0
54.2
TOTAL LOAD (kVA) SEC 1
CONNECTED (AMP) SEC I
DEMAND (kVA)
DEMAND (AMP)
REMARKS:
r,
2012 Washington State Energy Code Compliance Forms for Commercial Buildings including R2 & R3 over 3 stories and all R1 Revised Jan 2014
Project Info
Project Address 1 - 3355 South 120th Place
Date 5/21/2013
Compliance
2 - Tukwila, WA 98168
For Building Department Use
forms do not
3 - This address line will copy onto other forms
require a
password to
use. Instructional
Applicant Name: 4 - Sabe y Construction
and calculating
cells are write -
Applicant Address: 12201 Tukwila nternational Blvd Seattle WA 98168
protected.
Applicant Phone: 206-281-8700
[Project Description New Building Li Addition EPlans Included
Alteration
Lighting Compliance Path
Lighting Power Density Calculations Total Building Performance
(If Total Building Performance then only LGT-CHK is required.)
Lighting Power Allowance O
Building Area Method Space -By -Space Method
Method Selection required to
enable LPA forms
Interior Lighting System
Add 2x4 drop in fixtures and recessed can lights for office space buildout in existing facility
Description
Briefly describe lighting
system type and features.
Add[Jons and Change of Space Use (C101.4.3 & C101.4.4)
❑ Addition area or Change of Space Use area complies with all applicable provisions as stand alone project
Addition area is combined with existing building lighting systems to demonstrate compliance with all applicable
provisions per C101.4.3
Provide Building Area Method (LTG-INT-BLD) or Space -By -Space Method (LTG-INT-SPACE) Compliance Form. Document maximum
allowed and proposed (including existing if applicable) lighting wattage of Addition or Change of Use space. Provide applicable lighting
controls per C405.2 and commissioning of lighting controls per C405.13.
AlteQtions, Renovations and Repairs (C101.4.3.1)
60% or more of luminaires in space replaced
Provide Building Area Method (LTG-iNT-BLD) or Space -By -Space Method (LTG-iNT-SPACE) Compliance Form. Document maximum
allowed wattage within the lighting retrofit space in Maximum Allowed Wattage table and proposed (including existing) lighting wattage in
❑ Proposed Wattage table. Retrofit and non -retrofit spaces shall be documented separately using multiple forms.
Less than 60% of luminaires in space replaced
Provide a separate Space -By -Space Method (LTG-INT-SPACE) Compliance Form for this retrofit area. Document existing total wattage
❑within the lighting retrofit space in cell provided in the Maximum Allowed Wattage table. Document proposed (including existing) lighting
wattage in the Proposed Wattage table.
❑ Lamp and/or ballast replacement within existing luminaires only —existing total interior building wattage not increased
New wiring installed to serve added fixtures and/or fixtures relocated to new circuit
❑ Provide applicable manual lighting controls (C405.2.1), occupancy sensors (C405.2.2.2), daylight zone controls (C405.2.2.3), specific
application controls (C405.2.3), and commissioning of lighting controls per C405.13
New or moved lighting panel
❑ Provide all applicable lighting controls as noted for New Wiring, automatic time switch controls (C405.2.2.1), and commissioning of lighting
controls per C405.13.
❑ Space is reconfigured - luminaires unchanged or moved only
Provide all applicable lighting controls as noted for New Wiring and commissioning of lighting controls per C405.13.
No changes are being made to the interior lighting and space use not changed. RECEIVE
PL 15-0 '1 �9
--a I wr— I ILA.
MAY 2 6 2015
PERMIT CENTER
2012 Washington State Energy Code Compliance Forms for Commercial Buildings including R2 & R3 over 3 stories and all R1
Revised Jan 2014
Project Address 1 - 3366 South 120th Place
Date 5/21/2013
Lighting Alterations, Renovations & Building Additions
For Building Department Use
O Less than 60% O 60% or more O Stand alone Q Addition
fixtures replaced fixtures replaced bldg. addition combined w/exist
Notes:
a. lighting fixtures in a building addition may comply as a stand alone project, or they may be
combined with the overall existing bldg lighting to demonstrate compliance. Refer to C101.4.3.
b. For retrofits and building additions, provide Space Types and gross interior areas in the
Maximum Allowed lighting table. If a builidng addition will comply as combined with the overall
existing builidng, include all applicable existing Space Types and gross interior areas.
c. Document new fixtures and all existing to remain fixtures in the Proposed Lighting table.
d. If less than 60% of existing fixtures will be replaced, provide total existing lighting wattage
(prior to retrofit) in the space provided in the Maximum Allowed Lighfing table.
Maximum Allowed
Lighting Wattage
Location (plan #,
Allowed
Gross Interior
Watts Allowed
room #)
Space Type*
Watts per ft2
Area in ft2
(watts/ft2 x area)
OFFICE
Office - Open plan
0.98
500
490
OFFICE
Office - Open plan
0.98
333
326
OFFICE 2
Office - Open plan
0.98
1000
980
Atrium— Enter Height:
Existing Lighting Enter Exist. Watts:
Retail Display Allowance from LTG-INT-DISPLAY
Select Table C405.5.2(2) category from drop down menu.
For attiums, indicate height. Allowed wattage for first 40 feet is 0.03 W/ft. ht.,
above 40 feet is 0.02 INV. ht.
Proposed Lighting Wattage
Area Allowed Watts
Total 1833 17 96
Location (plan #,
room #)
Fixture Description***
Number of
Fixtures
Watts/
Fixture
Watts
Proposed
OFFICE 5
2X4 TROFFER T-6 LAMPING 2 LAMP ELECTRONIC
6
60
360
OFFICE 4
2X4 TROFFER T-5 LAMPING 2 LAMP ELECTRONIC
6
60
360
OFFICE 2
2X4 TROFFER T-6 LAMPING 2 LAMP ELECTRONIC
12
60
720
OFFICE 5 8 4
ENTRY DOWN LIGHT CFL 26 WATT TRIPLE TUBE
1
30
30
OFFICE 2
ENTRY DOWN LIGHT CFL 26 WATT TRIPLE TUBE
1
30
30
Retail Display Lighting from LTG-INT-DISPLAY
Total Proposed Watts may not exceed Total Allowed Watts for Interior Lighting Total Proposed Wattl
1500
— Include existing to remain lighting fixtures and exempt lighting equipment per notes below.
Notes:
1. Include ALL proposed lighting fixtures.
2. For proposed Fixture Description, indicate fixture type, lamp type (e.g. T-8), number of lamps in the fixture, and ballast type (if included). For
track lighting, list the length of the track (n feet) in addition to the fixture, lamp, and ballast information.
3. For proposed Watts/Fixture, use manufacturer's listed maximum input wattage of the fixture (not simply the lamp wattage) and other criteria
as specified in Section C405.5.1. For line voltage track lighting, list the greater of actual luminaire wattage or length of track multiplied by 50,
or as applicable, the wattage of current limiting devices of the transformer. For low voltage track lighting list the transformer rated wattage.
4. For lighting equipment eligible for exemption per C405.5.1, note exception number and leave Watts/Fixture blank.
5. Document existing to remain fixtures in Proposed Lighting table in the same manner as new fixtures. Identify as existing in fixture description.
6. If #NA appears in Retail Display cells, information on LTG-INT-DISPLAY is incomplete.
Interior Lighting Power Allowance COMPLIES
Lighting, Motor, and TMsformer Permit DocumenWhecklist LTG-CHK
2012 Washington State Energy Code Compliance Forms for Commercial Buildings including R2 & R3 over 3 stories and all R1 Revised Jan 2014
Project Address 1 - 3355 South 120th Place
Date 5/21/2013
The following information is necessary to check a permit application for compliance with the lighting, motor, and transformer requirements in the
Washington State Energy Code, Commercial Provisions.
Applicability
Location in
Building Department
(yes ,no,na)
Code Section
Component
Compliance information required in permit documents
Documents
Notes
LIGHTING CONTROLS (Section C405.2)
C405.2.1.1
Manual interior
Indicate on plans the manual control type & locations served;
Indicate of plans the 50% lighting load reduction method
C405.2.1.2
lighting controls
provided or identify exception taken
Indicate lighting system automatic shut-off capability - identify
lighting zone areas served on plans;
Automatic time
Indicate locations of override switches on plans and the areas
C405.2.2.1
switch controls and
override switching
served, include area sq. ft.;
Indicate locations where automatic shutoff is provided by other
methods (occupancy sensor, daylight controls, etc)
YES
C405.2.2.2
Occupancy sensors
Indicate on plans the locations served by occupancy sensors
ENTRY AREA TO
OFFICE
Daylight zones -
Indicate vertical fenestration primary and secondary daylight
C405.2.2.3
Vertical fenestration
zone areas on plans, include sq. ft.;
and skylights
Indicate skylight daylight zone areas on plans, include sq. ft.
Daylight zone
Indicate on plans the locations served by daylight zone controls;
C405.2.2.3.2
controls
Indicate in plans the lighting load reduction (dimming) method -
stepped or continuous dimming
C405.2.3
Specific application
lighting controls -
Indicate on plans the locations served by specific application
General
lighting controls
Indicate lighting control method for display and accent lighting,
C405.2.3 -
Display and accent
and display case lighting;
Indicate these fixtures are controlled independently from both
Items 1&2
lighting
general area lighting and other lighting applications within the
same space
C405.2.3 -
Hotel/motel guest
Provide a lighting control device at each guest room entry for all
Item 3
rooms
permanently installed fixtures in guest room;
Indicated whether lighting control is manual or automatic
C405.2.3 -
Supplemental task
Provide automatic shut-off vacancy controls for supplemental
Item 4
lighting
task lighting, including under -shelf or under -cabinet lighting
Identify eligible non -visual applications and method of lighting
C405.2.3 -
Lighting for non -
control;
Indicate these fixtures are controlled independently from both
Item 5
visual applications
general area lighting and other lighting applications within the
same space
Indicate lighting control method for lighting equipment for sale or
C405.2.3 -
Lighting equipment
demonstration;
Indicate these fixtures are controlled independently from both
Item 6
for sale or
demonstration
general area lighting and other lighting applications within the
same space
If egress lighting power density is greater than 0.05W/ft2,
C405.2.3 -
Means of egress
indicate method of automatic shut-off during unoccupied
Item 7
lighting
periods;
Identify on plans the egress fixtures that function as both normal
and emergency means of egress illumination
C405.10
Cooler and freezer
Provide vacancy device or timer to turn off fixtures within 15
C405.11
lighting
minutes of unoccupancy for cooler and freezer lighting fixtures
with lamp efficacy less than 40 lumens per watt
C405.2.4
Exterior lighting
Indicate on exterior lighting plans the automatic lighting control
controls
method and locations served
Exterior building
Provide motion sensor controls for building grounds fixtures
C405.6.1
grounds lighting
rated at greater than 100 watts with lamp efficacy less than 60
controls
lumens, or identify exception taken
Identify applicable commissioning documentation requirements
per Section C408 or eligibility for exception;
Provide written procedures for functional testing of all automatic
C408.3
Lighting system
functional testing
controls and describe the expected system response;
Identify in construction documents the party responsible for
functional testing of automatic lighting controls
Lighting, Motor, and TMsformer Permit DocumenWhecklist LTG-CHK
2012 Washington State Energy Code Compliance Forms for Commercial Buildings including R2 & R3 over 3 stories and all R1 Revised Jan 2014
Project Address 1 - 3355 South 120th Place
Date 5/21/2013
The following information is necessary to check a permit application for compliance with the lighting, motor, and transformer requirements in the
Washington State Energy Code, Commercial Provisions.
Applicability
Location in
Building Department
(yes,no,na)
Code Section
Component
Compliance information required in permit documents
TDocuments
Notes
INTERIOR LIGHTING POWER & EFFICACY Sections C405.5, C405.10, C405.11
Provide fixture schedule with fixture types, lamps, ballasts, and
rated watts per fixture;
C405.5.1
Identify spaces eligible for lighting power exemption on plans
C405.5.1.1
Total connected
and in compliance forms;
C405.5.1.2
C405.5.1.3
interior lighting power
Identify lighting equipment eligible for exemption in fixture
C405.5.1.4
schedule and in compliance forms;
Indicate that exempt lighting equipment is in addition to general
area lighting and is controlled independently
C405.4
Exit signs
Provide exit sign types and rated watts per fixture in fixture
schedule (maximum 5 watts per fixture)
C405.10
Cooler and freezer
For lighting in walk-in coolers and freezers, and refrigerated
C405.11
lighting
warehouse coolers and freezers, provide rated lamp efficacy (in
lumens per watt) in fixture schedule
Lighting Power Calculation - Indicate compliance path taken
Complete required compliance forms — proposed wattage per
C405.5.2
Building Area Method
building area does not exceed maximum allowed wattage per
building area. Identify locations of building areas on plans
Space -By -Space
Complete required compliance forms — total proposed wattage
C405.5.2
Method
does not exceed maximum allowed wattage. Identify locations of
space types on plans, including retail display areas as applicable
EXTERIOR LIGHTING
POWER & EFFICACY Section C405.6
Provide fixture schedule with fixture types, lamps, ballasts, and
rated watts per fixture;
Total connected
Identify exterior applications eligible for lighting power exemption
C405.6.2
exterior lighting
on plans and in compliance forms;
power
Indicate that exempt exterior lighting is controlled independently
from non-exempt exterior lighting
Table
C405.6.2(1)
Exterior lighting zone
Indicate building exterior lighting zone as defined by the AHJ
Exterior building
For building grounds fixtures rated at greater than 100 watts,
C405.6.1
grounds lighting
provide rated lamp efficacy (in lumens per watt) in fixture
schedule
Exterior lighting
Complete required compliance form — proposed wattage for
C405.6.2
power calculations
exterior lighting plus base site allowed does not exceed
maximum allowed
MOTORS & TRANSFORMERS (Sections C405.8, C405.9)
C405.8
Electric Motors
For motors not part of an HVAC system, provide electric motor
schedule on electrical plans with hp, rpm, and rated efficiency
C405.9
Transformers
Provide distribution transformer schedule on electrical plans
with transformer size and efficiency
ex
PERMIT COORD COPY
PLAN REVIEW/ROUTING SLIP
PERMIT NUMBER: EL15-0469
PROJECT NAME: MAIL CHIMP
SITE ADDRESS: 3355 S 120 PL
X Original Plan Submittal
Response to Correction Letter #
DATE: 05/26/15
Revision #
Revision #
before Permit Issued
after Permit Issued
DEPARTMENTS:
Building ivision 41 Fire Prevention ❑ Planning Division ❑
Public Works ❑ Structural ❑ Permit Coordinator
PRELIMINARY REVIEW: DATE: 05/28/15
Not Applicable ❑ Structural Review Required ❑
(no approval/review required)
REVIEWER'S INITIALS: DATE:
APPROVALS OR CORRECTIONS: DUE DATE: 06/25/15
Approved ❑ Approved with Conditions ❑
Corrections Required ❑ Denied ❑
(corrections entered in Reviews) (ie: Zoning Issues)
Notation:
REVIEWER'S INITIALS:
DATE:
Permit Center Use Only
CORRECTION LETTER MAILED:
Departments issued corrections: Bldg ❑ Fire ❑ Ping ❑ PW ❑ Staff Initials:
12/18/2013
HOLMES ELECTRIC CO
Page 1 of 2
1-l0111e IrlidO en .lspanol Contact.
Safety
Washington State Department of
Labor & Industries
HOLMES ELECTRIC CO
Search L&I
A-! Index Help My Secure L&I
Claims & Insurance Workplace Rights Trades & Licensing
Owner or tradesperson
PO BOX 338
KENT, WA98035
Principals
2534794000
HOLMES, MICHAEL J, PRESIDENT
KING County
RICHARDS, MICHAEL W, SECRETARY
HOLMES, JERAY A, AGENT
RICHARDS, EUGENE M
(End: 10/15/2010)
Doing business as
HOLMES ELECTRIC CO
WA UBI No. Business type
177 003 752 Corporation
License
Verify the contractor's active registration / license / certification (depending on trade) and any past violations.
Electrical Contractor Active.
..................................... _... _..................
Meets current requirements.
License specialties
GENERAL
License no.
HOLMEEC549BH
Effective — expiration
01/08/1946-10/31/2016
Designated administrator
Active.
WILLMAN, ED
Meets current requirements.
License type
License no.
Master Electrician
HILLME'973KR
Bond
North American Spec Ins Co
$4,000.00
Bond account no.
2192663
Received by L&I
Effective date
11 /21 /2014
12/08/2014
Expiration date
Until Canceled
Bond history
Savings
No savings accounts during the previous 6 year period.
License Violations
........................................................
Infraction no.
ESHA000715 Satisfied
Issue date RCWIWAC
19.28.101 RCW
https://secure.Ini.wa.gov/verify/Detail.aspx?UBI=177003752&LIC=HOLMEEC549BH&SAW= 6/10/2015