HomeMy WebLinkAboutPermit M16-0075 - CLEAR SIGN COMBUSTION - ROOFTOP HVAC UNIT REPLACEMENTThis record contains information which is exempt from public disclosure
pursuant to the Washington State Public Records Act, Chapter 42.56 RCW
as identified on the Digital Records Exemption Log shown below.
M16-0075
CLEAR SIGN COMBUSTION
12870 INTERURBAN AVE S
RECORDSDIGITAL D-) EXEMPTION LOG
THE ABOVE MENTIONED PERMIT FILE INCLUDES THE FOLLOWING REDACTED INFORMATION
Page # Coda Exemption, � � � I3ri6f Explanatory 6escrlofion, Sfatutte/Ruilo
The Privacy Act of 1974 evinces Congress'
intent that social security numbers are a private
concern. As such, individuals' social security
Personal Information —
numbers are redacted to protect those
Social Security Numbers
individuals' privacy pursuant to 5 U.S.C. sec.
5 U.S.C. sec.
DR1
Generally — 5 U.S.C. sec.
552(a), and are also exempt from disclosure
552(a); RCW
552(a); RCW
under section 42.56.070(1) of the Washington
42.56.070(1)
42.56.070(1)
State Public Records Act, which exempts under
the PRA records or information exempt or
prohibited from disclosure under any other
statute.
Redactions contain Credit card numbers, debit
card numbers, electronic check numbers, credit
Personal Information —
expiration dates, or bank or other financial
RCW
46
DR2
Financial Information —
account numbers, which are exempt from
42.56.230(5)
RCW 42.56.230(4 5)
disclosure pursuant to RCW 42.56.230(5),
except when disclosure is expressly required by
or governed by other law.
Personal Information —
Redactions contain information used to prove
RCW
DR3
Driver's License. — RCW
identity, age, residential address, social security
42.56.230 (7a
42.56.230
number or other personal information required to
& c)
(7a & c)
apply for a driver's license or identicard.
Redacted content contains a communication
between client and attorney for the purpose of
obtaining or providing legal advice exempt from
RCW
Attorney -Client Privilege —
disclosure pursuant to RCW 5.60.060(2)(a),
5.60.060(2)(a);
DR4
RCW 5.60.060(2)(a); RCW
which protects attorney-client privileged
RCW
42.56.070(1)
communications, and RCW 42.56.070(1), which
42.56.070(1)
protects, under the PRA, information exempt or
prohibited from disclosure under another statute.
CLEAR SIGN
COMBUSTION
12870 INTERURBAN AVE S
M 1 6-0075
City of Tukwila
• Department of Community Development
• 6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206-431-3670
Inspection Request Line: 206-438-9350
Web site: http://www.TukwilaWA.gov
MECHANICAL PERMIT
Parcel No:
2716000010
Permit Number: M16-0075
Address:
12870 INTERURBAN AVE S
Issue Date: 5/27/2016
WA Cities Electrical Code:
2014
Permit Expires On: 11/23/2016
Project Name:
CLEAR SIGN COMBUSTION
2014
Owner:
2012
WA State Energy Code:
Name:
EPROPERTY TAX INC DEPT #207
2012
Address:
PO BOX 4900, SCOTTSDALE, WA,
85261
✓
Contact Person:
Name:
DAWNA PETET
Phone: (253) 939-9495
Address:
899 W MAIN ST, AUBURN, WA, 98001
Contractor:
Name:
IECS INC
Phone: (206) 939-9495
Address:
PO BOX 19252, SEATTLE, WA, 98109-
1252
License No:
IECS***044QL
Expiration Date: 11/20/2016
Lender:
Name:
Address:
DESCRIPTION OF
WORK:
REPLACE EXISTING
CARRIER 3 TON ROOFTOP HVAC UNIT WITH NEW CARRIER 3 TON ROOFTOP HVAC UNIT
Valuation of Work: $10,750.00
Fees Collected: $337.36
Type of Work: REPLACEMENT
Electrical Service Provided by: SEATTLE CITY LIGHT
Fuel type: GAS
Water District: TUKWILA
Sewer District: TUKWILA
Current Codes adopted by the City of Tukwila:
International Building Code Edition:
2012
National Electrical Code:
2014
International Residential Code Edition:
2012
WA Cities Electrical Code:
2014
International Mechanical Code Edition:
2012
WAC 296-46B:
2014
Uniform Plumbing Code Edition:
2012
WA State Energy Code:
2012
International Fuel Gas Code:
2012
✓
Permit Center Authorized Signature:
Date:
I hearby certify that I have read and examined this permit and know the same to be true and correct. All
provisions of law and ordinances governing this work will be complied with, whether specified herein or not.
The granting of this permit does not presume to give authority to violate or cancel the provisions of any other
state or local laws regulating construction or the performance of work. I am authorized to sign and obtain this
development_permit and agre§-to the conditions attached to this permit.
Signature§.;
Print Name:
C
Date:
This permit shall become null and void if the work is not commenced within 180 days for the date of issuance, or
if the work is suspended or abandoned for a period of 180 days from the last inspection.
PERMIT CONDITIONS:
1: Work shall be installed in accordance with the approved construction documents, and any changes made
during construction that are not in accordance with the approved construction documents shall be
resubmitted for approval.
2: All permits, inspection record card and approved construction documents shall be kept at the site of work
and shall be open to inspection by the Building Inspector until final inspection approval is granted.
3: Readily accessible access to roof mounted equipment is required.
4: All construction shall be done in conformance with the Washington State Building Code and the
Washington State Energy Code.
5: Remove all demolition rubble and loose miscellaneous material from lot or parcel of ground, properly cap
the sanitary sewer connections, and properly fill or otherwise protect all basements, cellars, septic tanks,
wells, and other excavations. Final inspection approval will be determined by the building inspector
based on satisfactory completion of this requirement.
6: All plumbing and gas piping work shall be inspected and approved under a separate permit issued by the
City of Tukwila Building Department (206-431-3670).
7: VALIDITY OF PERMIT: The issuance or granting of a permit shall not be construed to be a permit for, or an
approval of, any violation of any of the provisions of the building code or of any other ordinances of the
City of Tukwila. Permits presuming to give authority to violate or cancel the provisions of the code or
other ordinances of the City of Tukwila shall not be valid. The issuance of a permit based on construction
documents and other data shall not prevent the Building Official from requiring the correction of errors in
the construction documents and other data.
8: `MECHANICAL PERMIT CONDITIONS'
9: All mechanical work shall be inspected and approved under a separate permit issued by the City of
Tukwila Permit Center (206/431-3670).
10: Manufacturers installation instructions shall be available on the job site at the time of inspection.
PERMIT INSPECTIONS REQUIRED
Permit Inspection Line: (206) 438-9350
0703
MECH EQUIP EFF
1800
MECHANICAL FINAL
0705
REFRIGERATION EQUIP
0701
ROUGH -IN MECHANICAL
0702
SMOKE DETECTOR TEST
ILA LIS
z
J '0
P i
1906
CITY OF TUKWILA
Community Development Department
Permit Center
6300 Southcenter Blvd., Suite 100
Tukwila, WA 98188
htti)://www.Tukwi]aWA.g-ov
SITE LOCATION
Mechanical Permit No. MIUO—ChI5—
Project
No.
Date Application Accepted:
Date Application Expires: `U Y
(For office use only)
MECHANICAL PERMIT APPLICATION
Applications and plans must be complete in order to be accepted for plan review.
Applications will not be accepted through the mail or by fax.
**please print**
King Co Assessor's Tax No.: 11'!✓ oWD / 0
Site Address: 7o Suite Number: Floor:
Tenant Name: l_ �-?C f— (Q New Tenant: ❑ .....Yes No
CONTACT PERSON — person receiving all project
communication
Name:
, I-Wntl P:Ae4
6?awefflp�bwa
City: State:
Address:
City: State: Zip:
Pho% - — ax:
f
Email:
0&;]r
I
,
MECHANICAL CONTRACTOR INFORMATION
Company Name:
Address: M ^
City: State:
/1 _ Zip: /
Phone: e _Gax:
7
_ 96
Contr Reg No. rC
E
ExpDate:
Tukwila Business License No.:
8
T
Valuation of project (contractor's bid price): $
Describe the scope of work in detail: 0ex ` _ f Ca�' 3 -ro-n
" I -Ll -l" ( l-"- 3 Tan
Use: Residential: New .......... ❑ Replacement ........ ❑
Commercial: New .......... Replacement........
Fuel Tvoe: Electric ..... ❑ Gas .......
Other:
H:VApplications\Fomr,-Applications On Line\2016 ApplicationsWechanical Permit Application Revised 1-4-16.docx
Revised: ]anuarv2016
"A.
Nee] of2
Indicate type of mechanical work being installed and the quantity below:
Unit Type
Qty
Furnace <100k btu
Residential, Nighttime
Furnace >I 00k btu
Industrial
Floor furnace
55 dB(A)
Suspended/wall/floor
mounted heater
57 dB(A)
Appliance vent
Commercial
Repair or addition to
heat/refrig/cooling
system
f
Air handling unit
<10,000 cfm
_tl
65 dB(A)
Unit Type
Qty
Air handling unit
>10,000 cfm
Residential, Nighttime
Evaporator cooler
Industrial
Ventilation fan
connected to single duct
55 dB(A)
Ventilation system
57 dB(A)
Hood and duct
Commercial
Incinerator — domestic
f
Incinerator —
comm/industrial
65 dB(A)
Unit Type
Qty
Fire damper
Residential, Nighttime
Diffuser
Industrial
Thermostat
55 dB(A)
Wood/gas stove
57 dB(A)
Emergency enerator
Commercial
Other mechanical
equipment 31'an
f
Rob 6P pp_
65 dB(A)
f 0o ID4 U
Boiler/Compressor Qty
0-3 hp/100,000 btu
3-15 bp/500,000 btu
15-30 hp/1,000,000 btu
30-50 hp/1,750,000 btu
50+ bp/1,750,000 btu
Noise'
Mechanical units need to be in compliance with the Tukwila Noise Code. Maximum permissible sound levels are based on from where the sound is
created and where the sound is heard. Additionally, if sound can be heard from within a house at night in a residential zone it may not be allowed.
For more details, see TMC 8.22
District of Sound
Producing Source
District of Receiving Property
Residential, Daytime*
Residential, Nighttime
Commercial
Industrial
Residential
55 dB(A)
45 dB(A)
57 dB(A)
60 dB(A)
Commercial
57 dB(A)
47 dB(A)
60 dB(A)
65 dB(A)
Industrial
60 dB(A)
50 dB(A)
65 dB(A)
70 dB(A)
*Daytime means 7AM-IOPM, Monday through Friday and 8AM-lOPM, Saturday, Sunday and State -recognized holidays.
A few sounds are exempt from the noise code, including:
Warning devices;
Construction and property maintenance during the daytime hours (lam- l Opm);
Testing of backup generators during the day.
PERMIT APPLICATION NOTES -
Value of construction — in all cases, a value of construction amount should be entered by the applicant. This figure will be reviewed and is subject
to possible revision by the permit center to comply with current fee schedules.
Expiration of plan review — applications for which no permit is issued within 180 days following the date of application shall expire by limitation.
The building official may grant one extension of time for additional periods not to exceed 90 days each. The extension shall be requested in writing
and justifiable cause demonstrated. Section 105.3.2 International Building Code (current edition).
I HEREBY CERTIFY THAT I HAVE READ AND EXAMINED THIS APPLICATION AND KNOW THE SAME TO BE TRUE UNDER
PENALTY OF PERJURY BY THE LAWS OF THE STATE OF WASHINGTON, AND I AM AUTHORIZED TO APPLY FOR THIS PERMIT.
&eENT-
HIS
Print Name: Day Telephone:
Mailing Address:_09—JIL,
City State zip
H:Wpplications\Forrm-Applicatims On Line\2016 ApplicationsWechanical Permit Application Revised 1-4-16.docx
Revised: January2016 Paee 2 oft
DESCRIPTIONS
PermitTRAK
$779.24
M16-0074 Address: 3425 S 116TH ST 101
Apn: 1023049043
$441.88
MECHANICAL
$424.88
PERMIT ISSUANCE BASE FEE
R000.322.100.00.00
0.00
$32.50
PERMIT FEE
R000.322.100.00.00
0.00
$307.40
PLAN CHECK FEE
R000.322.102.00.00
0.00
$84.98
TECHNOLOGY FEE
$17.00
TECHNOLOGY FEE
R000.322.900.04.00
0.00
$17.00
M16-0075 Address: 12870 INTERURBAN AVE S Apn: 2716000010
$337.36
MECHANICAL
$324.38
PERMIT ISSUANCE BASE FEE
R000.322.100.00.00
0.00
$32.50
PERMIT FEE
R000.322.100.00.00
0.00
$227.00
PLAN CHECK FEE
R000.322.102.00.00
0.00
$64.88
TECHNOLOGY FEE
$12.98
TECHNOLOGY FEE
R000.322.900.04.00
0.00
$12.98
TOTAL FEES PAID
Date Paid: Tuesday, May 10, 2016
Paid By: SEATTLE MECHANICAL INC
Pay Method: CHECK 9687
Printed: Tuesday, May 10, 2016 11:11 AM 1 of 1
SYSTEMS
INSPECTION RECORD
Retain a copy with permit �l � �����'
INSPECTION N0. PERMIT NO.
CITY OF TUKWILA BUILDING DIVISION
6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431-3670
Permit Inspection Request Line (206) 438-9350
Pro' ct:Ty
a of Inspection: I�
ft
Address:
1 '7G
Date Called:
Special Instructions:
Date Wanfted a.
C� , 7 p.m.
Requester
Phone No:
Approved per applicable codes. Corrections required prior to approval.
OK --- MICC 1+li ll GeL F'I NA -I-
- 1*U6-t+A1V161 L.
1 ns pector: Date:
REINSPECTION FEE REQUIRED. Prior to next inspection, fee must be
paid at 6300 Southcenter Blvd., Suite 100. Call to schedule reinspection.
INSPECTION RECORD
Retain a copy with permit f ��
INSPECTION NO. PERMIT NO.
CITY OF TUKWILA BUILDING DIVISION
6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431-3670
Permit Inspection Request Line (206) 438-9350
Prpj�C®A r
Type of Jnespeition: �
Ad s.DayCalled:
Special Instructions:
Dat ,! ed: / a.m.
�d 1� p.m.
Requester:
Phone No:
E] Approved per applicable codes. !__J Corrections required prior to approval.
Inspector: Date:
El REINSPECTION FEE REQUIRED. Prior to next inspection, fee must be
paid at 6300 Southcenter Blvd., Suite 100. Call to schedule reinspection.
YZt-Q -D FOFL-
0 Foa&anlcal
Eiactrical
Vrnbing
s Piping
City of Tukwila
FOLDING nivtcrnki
REVISIONS
No changes shall he made to the scope
of viorlc kvithou4 prior approval of
;'``� :ila Eu=lding Division.
N1 E: i;l require a new plan submittal
L - mi may include additional plan review fees. i
FILE COPY
Permit No. l - 77-,'S'�
Plan review approval is subject to errors and omissions.
Approval Of construction documents does not authorize
th9 viola^Icn of any adopted code or ordinance. Receipt
of approve;tol op and itions is acknowledged:
JU
na pe4e*
Date:
City of Tukwila
BUILDING DIVISION
MI &w-- 0075
FOR
MAY 242016�
of Tuk*ils
BUf�LD�IRK3 OMSION
RECEIVED
CITY OF TUKWILA
MAY 10 2016
PERMIT CENTER
111
Ir
Ir
---
• Ab • '
.,% _ry
CAKME 3 STOW 49KCD RTS! ,f
� jj
_SAA i( 'Pr tZ sMuciUP.AL ClU(�.
earth feet 300
nietersi 001 5v
100
2
2012 Washington State Energy Code
Proiect Info
rIL
Project Description
Briefly describe mechanical
system type and features.
Includes Plans
Compliance Option
Equipment Schedules
ID Type I Brand Name'
u _ . I fX
)ment Schedule
Forms for Commercial, Group R1, and > 3 story R2 8 R3 "
Revised June 2
ect Address Date ,�
i-C� —�h h 44 W s For Building Dept. Use
Name:
r.NNnwm r�wress: /j
`7 1
in�gApplicant Phone:
lt)�A &W WA,&�
Include documentation requiring compliance with commissioning provisions per Section C408.
IRimple System Domplex System oystems Analysis
The following information is required to be incorporated with the mechanical equipment schedules on the
plans. For projects without plans, fill in the required information below.
Model No. Bluth or Econo?
IPLV'I Option or I Recovery
Exception6 Y/N
14uly- Cywp Capacity2
ID Type Brand Name' Model No.' Btu/h
OSA cfm
or Econo?
Input Btuh
Output Btuh Heat
P Efficiency' Recovery
Y/N
,v
r
Fan
Equip. Equip
ID Type Brand Name' Model No.' CFM SP' HP/BHP
.� -
Service Water Heating Q. u—A.5
Equip. Equip ---------__-- Input
ID Type Brand Name' Model No.' Capacity
Sub
Category
EF'
Location of Service
avanalJ'C. - ms tesiea accoramg to Table C403.2.3(1)A thru C403.2.3(8). ' If required. •COP, HSPF, Combustion Efficient �qFIQ
applicable. 5 Flow control types: variable air volume (VAV), constant volume (CV) or variable speed (VS). 6 Economizer exception number per Simple
Svstems C403.3.1 or Comolex Svstems C403.4.1. 7 Efficiencv Factor Der Table C404.2.
M I �11- PERMIT CENTER
007S
2012 Washington State Energy Code Compllance Farms for
Project Address O
The following information is necessary to check a me
NOTE: Define Print area In Excel prior to printing I
Applicability Code Section Code Provision
permit
R1, and> 3 story
Information Required
GENERAL PROVISIONS
with the 2012
!nt Sizing & Performance
Load calculations
Load calculations performed perASHRAE Std 183 or equivalent per Chapter 3
quipment and system sizing Output capacity of heating and cooling equipment and systems do not exceed
calculated loads, note exceptions taken
inimum ventilation
M4032.3.2&&
Ventilation (natural or mechanical) provided per IMC; indicate mechanical
ventilation is ce able of being reduced to minimum requirement per IMC
Provide equipment schedules or complete MECH-SUM tables with
quipment minimum efficient capacity, efficiency, test
standard (or other efficiency source) for all mechanical
equipment
C403.2.13 Electric motor efficiency
Provide equipment schedule with hp, rpm, efficiency for all motors; note except.
C403.2.10 Fan power limitation
Fan system motor hp or bhp does not exceed limits per Table C403.2.10.1(1)
C403.2.110 .3
& C403.2.13 Fraction�motorsIndicate
fan motors 1/12 to 1 hp are ECM type or meet minimum efficiency req.
C403.2.3 Maximum air cooled chiller
ea aci
Indicate air-cooled chiller capacity does not exceed air-cooled chiller limit
C403.2.1 Non-standard water-cooled
Full -load and NPLV values for water-cooled centrifugal chiller adjusted for non
chillers
-
standard operational conditions
0403.2.12.1.2 Centrifugal fan cooling towers Large capacity cooling towers with centrifugal fan(s) meet efficiency
requirements for axial fan open circuit cooling towers
0403.2.3 Forced air furnace and unit
heaters
Indicate intermittent ignition or IID, flue/draft damper &
jacket loss
heatin /coolin equipment
1. C403.2.3.3 Packaged electric
List equipment required to be heat pumps on schedule
C403.2.3.4 Humidification
Indicate method of humidification (note requirements for systems with
economizer
:em Controls & Criteria
rmostatic controls
Indicate locations of thermostatic control zones on plans, including perimeter
systems
t pump supplementary
WC403.2.4.3
t
Indicate staged heating (compression/supplemental) & outdoor lock -out temp
point overlap (deadband)
Indicate 5°F deadband minimum for systems controlling both heating & cooling
omatic setback and
shutdown
Indicate zone t -stat controls with required automatic setback & manual override
C403.2.4.3.3 Automatic (optimum) start
Indicate system controls that adjust equip start time to match load conditions
C402.4.5.2 & Dampers
C403.2.4.4
Indicate location of OSA, exhaust, relief and return air dampers; include AMCA
rated leakage and control type motorized or gravity; note exceptions taken
C403.2.11 Heating outside a building
Indicate radiant heat system and occupancy controls
C403.2.4.5 Snow melt systems
Indicate shut-off controls based on outdoor conditions
C403.2.4.6 Combustion heating
ui ment
Indicate modulating or staged control
C403.2.4.7 Group R1 hotel/motel systems Indicate method for guest room automatic setback & set-up of 5"F minimum
C403.2.4.8 / g Group R2/R3 dwelling unit
systems
Indicate 5-2 programmable thermostats in primary spaces with minimum of two
setback nods; note excetions taken
C403.2.5.1 Demand controlled ventilation Indicate high -occupancy spaces and systems requiring DCV
C403.2.5.2 Occupancy sensors
Indicate spaces requiring occupancy -based system control and method; or
Enclosed loading
alternate means Provided to automaticali reduce OSA when artiall occu ied
C403.2.5.3 dock/parking garage
Indicate enclosed loading dock and enclosed parking garage ventilation system
ventilation
activation and control method
C403.2.5.4.1 Kitchen exhaust hoods
Indicate kitchen hoods requiring make-up air; indicate make-up air source and
conditioning method
C403.2.5.4.2 Laboratory exhaust systems
Indicate lab exhaust systems requiring heat recovery, method & efficiency; or
alternative method taken (VAV, semi -conditioned makeup, or CERM calculation)
Energy
0403.2.6,1 systems recovery ventilation
Indicate ventilation systems requiring ER, method & efficiency; cy; note exceptions
0403.2.6.2rgy $ stems " condensate
Indicate on-site steam heating systems
requiring q g enc rgy recovery
EEdC403.2.6.3 Energy recovery - condenser
s stems
remote refrig. condensers requiring ER and use
IIndicate
of captured energy
Location onI Building Department
Plans Notes
I
C403.2.8 Piping Insulation
1131pingti1ensulation
Indicate R-value of insulation on piping
0403.2.8.1 exposed to
Indicate method of protection from damage/degradation
SMPLESYS S
Qualifying Systems
C403.3
Qualifying single zone Verify unitary or packaged equipment does not exceed capacity limits, does not
systems have active humidifcation or simultaneous heating/cooling
C403.3
Q a m n9 2-pipe heating Verify 2-pipe heating-only system does not exceed capacity limits
C403.3.2
Hydronic system controls Refer to Complex Systems Section C403.4.3
Simple System Economizers
C403.3.1
Air economizer required
Indicate cooling systems requiring economizer controls; note in equip sched.
C403.3.1.1.1
Air economizer capacity
Indicate modulating OSA control capability up to 100% OSA, or exception
C403.3.1.1.3
Air economizer high limit
controls
Indicate high limit shut-off control method
g per Table 0403.3.1.1.3(2)
C403.1.1.2
Integrated air economizer
o eration I>
Indicate capability for partial air economizer operation for systems with capacity
65,000 btuh
C403.3.1
L--exceptions
Indicate eligible exception(s) taken and provisions to comply with exceptions)
4OM PLDCSYSTHMS
Complex System Economizers
C403.4.1
Air economizer required
Indicate cooling systems requiring economizer controls; note in equip sched.
LA
• ,
C403.4.1.4
Economizer heating system
impact
Verify control method of HVAC systems with economizers does not increase
building heating energy usage during normal operation
0403.4.1.3
Integrated economizer
operation
Indicate capability for partial economizer operation for air or water econo
systems
Moved
Water economizer capacity Indicate
water econo capable of 100% cooling capacity at 50°F db/45°F wb
OSA
0403.4.1.2
Water economizer maximum
pressure drop Indicate
precooling coils and heat exchangers do not exceed pressure drop limit
C403.3.1 Air economizer exceptions Indicate
eligible exception(s) taken and provisions to comply with exception(s)
Icu rc-asnmgion arere energy coae Compliance Forms for Commercial, Group R1, and >
The following information is necessary to check a mechanical permit application for commercial provision compliance with the 2012 WSEC. T
NOTE: Define print area in Excel prior to printing MECH-CHK pages.
Applicability Code Section Code Provision Location on Building De artment
(yes,no,na) Information 9 p
Plans Notes
ODM LlS1�5ME S(0 Nil!®
Specific System Requirements
C403 &
0403.2.1.2.12 Variable flow control - fans Indicate fans requiring variable flow control and method
C403.4.2.1 VAV fan static pressure Indicate sensor locations on plans; include at least one sensor per major duct
sensors branch
C403.4.2.2 VAV fan static pressure Indicate fan system static pressure setpoint based on zone requiring most
setpoint pressure
C403.4.5 VAV systems serving multi- Indicate supply air systems serving multiple zones that are required to be VAV,
zones method of primary air control, and zones served: note excantiane f.4..
0403.4.5.4
VAV system supply air reset
Indicate controls that automatically reset supply air tamp in response to loads
C403.4
Large capacity cooling
Indicate method of multi -stage or variable control for building cooling system
systems
capacity > 300 tons
0403.4.7
Hot gas bypass limitation
Indicate cooling equipment unloading or capacity modulation method
C403.4.3
Large capacity boiler systems
Indicate multi -stage or modulating burner for single boilers > 500,000 btuh
0403.4.3
Boller sequencing
Indicate automatic controls that sequence operation of multiple boilers
0403.4.3.5
Chiller / boiler plant pump
Indicate capability to automatically reduce overall plant flow and shutoff flow
isolation
through chillers & boilers when not In use
C403.4.2 &
C403.4.3.6
Variable flow control - pumps
Indicate pumps requiring variable flow control & method
Variable flow control -cooling
&
& 040
C403.4.4.4.4
towers
Indicate cooling tower fans requiring variable flow control and method
0403.4.3.4
Hydronic system part load
Indicate heating & chilled water systems have the capability to automatically
controls
reset supply water temp AND reduce flow by Z 50'Y fors stems > 300,000 btuh
C403.4.3.2
Two -pipe changeover
Indicate deadband, heating/cooling mode scheduling and changeover
systems
temperature range
0403.4.3.3.1
Water loop heat pump -
Indicate capability of central equipment to provide min. 20°F water supply temp
deadband
deadband between heat rejection and heat addition modes
C403.4.3.3
Water loop heat pump - heat
Provide heat exchanger that separates cooling tower and heat pump loop in
rejection
Climate Zone 5
C403.4.3.3.3
Water loop heat pump -
Indicate 2 -way isolation valve on each heat pump and variable flow control for
Isolation
systems with total pump power > 10 h
0403.4.6
Condenser water heat ry
Indicate system provided to pre -heat service water and efficiency
0403.5
Cooler /freezer -anti-sweat
heaters
Indicate w/sf & control method for walk-in cooler/freezer door anti -sweat heaters
C403.5 / 6
Cooler /freezer -evaporator
an codenserfa
Indicate motor type for evaporator and condenser fans < 1 hp
EERAMWATUViFATiNG
Service Water Systems
C404.2
Water -heating equip min.
Provide equipment schedule or complete MECHSUM table with type, capacity,
efficiency
efficiency, test standard or other efficient source
0404.3
Temperature controls
Indicate temperature controls have required setpoint capability
0404.4
Heat traps
Indicate piping connected to equipment have heat traps on supply & discharge
C404.5
Insulation underwater heater
Indicate R-10 insulation under tank
0404.6
Service water piping
Insulation
Indicate R -value of insulation on i in note exceptions taken
piping;
9;
0404.7 / g
Circulation systems and heat
trace shut-offIndicate
shutoff capability based on occupancy and periods of limited demand
C404.9
Group R-2 service hot water
MM—_
Indicate method of usage metering for dwell. units served by central HW system
Pools & In -Ground Permanently Installed Spas
A p
0404.10.1
Pool heating equip min.
Provide equipment schedule or complete MECHSUM table with type, capacity,
�►
efficiency
efficiency, test standard (or other eff. source); heat pump heaters 2 4 COP
C404.10.1 / 2
Pool heater on / off controls Indicate
automatic ordoff control based on scheduling & accessible on/off switch
on heater that operates Independent of thermostat setting; or exception taken
0404.10.3
Pool covers Indicate
vapor retardant cover and Insulation rating as required
C404.10.3 Pool
assembly insulation Indicate
rating of insulation on sides and bottom of pools heated to > 90°F
C404.10.4 Heat
recovery Indicate
method, exhaust air temperature reduction and recovered energy use
Carrier
United Technologies
SUBMITTAL
Pro ect
Clear Sign
Date
Monday, April 04, 2016
Contractor
Seattle Mechanical
M I &*, 0079
FILE
REVIEWED FOR
0 E'OOMPLIANCE
'� ARpROV�EI�
MAY 2 4 2016
city.Of TukwHe
BUILDING DIVISION
CITY OF TUKWILA
MAY 101016
PERMIT CENTER
3t Unit
Project: Clear Sign 04/04/201
Prepared By: 04:50PIV
3t Unit
Tag Cover Sheet
Unit Report
Certified Drawing
Performance Report
Unit Feature Sheet
Spec Sheet
Packaged Rooftop Builder 1.40 Page 2 of 11
Unit Report For 3t Unit
Project: Clear Sign 04/04/201E
Prepared By: 04:50PIV
Unit Parameters
Dimensions (ft. in.) & Weight (lb.) **"
Unit Model: ........................ 48KCDA04A2A6-OAOAO
Unit Length: ......................................... 6' 2.375"
Unit Size: ................................................ 04 (3 Tons)
Unit Width: ........................................... 3' 10.75"
Volts -Phase -Hertz: ..................................... 460-3-60
Unit Height: ......................................... 2' 9.375..
Heating Type: ..................................................... Gas
Total Operating Weight:...................... 550 Ib
Duct Cfg:............ Vertical Supply / Vertical Return
controller
Low Heat
"• Weights and Dimensions are approximate. Weight
Single Stage Compressor Models
does not include unit packaging. Approximate
dimensions are provided primarily for shipping purposes.
For exact dimensions and weights, refer to appropriate
product data catalog.
Lines and Filters
Return Air Filter Type: ........................... Throwaway
Return Air Filter Quantity: ....................................... 2
Return Air Filter Size: .............................. 16 x 25 x 2
Unit Configuration
Medium Static Option Belt Drive
AI/Cu - AI/Cu
Base Electromechanical Controls
Standard Packaging
Warranty Information
1 -Year parts(std.)
5 -Year compressor parts(std.)
10 -Year heat exchanger - Aluminized(std.)
No optional warranties were selected.
NOTE: Please see Warranty Catalog 500-089 for explanation of policies and ordering methods.
Ordering Information
Part Number
Description Quanti
48KCDA04A2A6-OAOAO
Rooftop Unit 1
Accessories
CRECOMZR067A00
Ultra LOW LEAK - Vertical EconoMi$er X with -solid-state W7220 1
controller
racKageo moonop buuaer 1.4U Page 3 of 11
Certified Drawing for 3t Unit
Project: clear Signe d B
04/04/201
Prace
04:501
11 IN
FIl11R ACCCSb PAA[[
iOOI �LEbb, COMP.
ACCESS [OND(NS[1
'
san
f9J]
!,
16-]/1
111811
iONE 14M,
LEFT
INDOOA COI(
ACCESS PANEL
J
fuel8l
MO. �
CTRICAL
DISCOXXECi
La TTGN
n-ive
ul
ave
san
f9J]
16-]/1
111811
PANEL
LEFT
INDOOA COI(
ACCESS PANEL
1
111
AA �►
BACK Axou iliie
TTP
CIIRB
tIDiX
ie-ve
lsn
11-ve 11-vA irw
nrn 11111 Jlxl
J
fuel8l
MO. �
CTRICAL
DISCOXXECi
La TTGN
n-ive
ul
ave
Jl Ile
Ie1eI
Ji -IIA —�{ � [COXOMI tE1 NWO �
(� IOPTIDXAII I6
(IOf]
san
f9J]
16-]/1
111811
ps
LEFT
Jl Ile
Ie1eI
Ji -IIA —�{ � [COXOMI tE1 NWO �
(� IOPTIDXAII I6
(IOf]
Ilr►�■�.iiit���.T.
'I
Cax[CI . s....
A I J/8. 1151 DIA FIELD 101111 SBPPLI NOLE
B 1' 1501 DIA Pd[R 51PPL1 MAOCBWI
C 1 ]/I. 1511 WA GANG[ ACC(SS PLW
D 118• []11 DIA FIELD CONTROL WIRING -E
E 31" 11 NPT CONDEx5A1[ DRAIN
F 1....11 APE GAA ""1CiION
G 1 11 - 1111 DIA —1A ]OPPL1 MR.1
Io�vt I-� Lu1
1Bisl j 1]E1
ps
111
0
1•
Ilr►�■�.iiit���.T.
'I
Cax[CI . s....
A I J/8. 1151 DIA FIELD 101111 SBPPLI NOLE
B 1' 1501 DIA Pd[R 51PPL1 MAOCBWI
C 1 ]/I. 1511 WA GANG[ ACC(SS PLW
D 118• []11 DIA FIELD CONTROL WIRING -E
E 31" 11 NPT CONDEx5A1[ DRAIN
F 1....11 APE GAA ""1CiION
G 1 11 - 1111 DIA —1A ]OPPL1 MR.1
Io�vt I-� Lu1
1Bisl j 1]E1
Packaged Rooftop Builder 1.40 Page 4 of 11
ps
111
Packaged Rooftop Builder 1.40 Page 4 of 11
Certified Drawing for 3t Unit
Project• Clear Sign �Prepared B 04/04/201
04:50P
y� uxnSD11, IT
STD. UKIi CORNEA CDAX[N CORN[A CORNEA 3 Fe lfCNNOlOG1E5 nrum.rn s r
Dx it RIGNT X[IGNT (AI RIGNT LBI LIC IGHI ICI LED
IDI [.G. KIM ���V// (RAR IFA r � nrL nixwr ur n x r° r
lRi K4. LBS. X4 Le5, KG. LIS RG. LE Y L 1
16X[ DI 190 iii 110 51 111 50 115 56 115 61 J6 311 190!1 11 1// 16161 10 /le Hill
16x[ 05 511 116 LIO 56 Iii 9/ Ili fl tlR 6x IX Sll 191]1 11 1/1 lice) t0 i/e [1191
I'll, 06 SIT iia 61 Isl 10 Is6 it IR fi l! 1/e 1!911 ZJ I/1 15911 10 ile ISI11
• STANDARD UN11 RIGNI IS fill LOR GAS HUT AND RTHW1 PACKAGING
rOR OTHER OPTIONS AAD ACCESSORIES, RESER TO THE PRODUCT DATA CATALOG.
CORNER A CORNER B
O
T
9
CORNER 0 l� CORNER C
r
TOP
Q
C�
00 '
FRONT
48NC 04-00 SINGLE ZONE EL EC iR[CAL 48N0000281
zDrr 09-76-14 COOLING WITH GAS HEAT -
Packaged Rooftop Builder 1.40 Page 5 of 11
Project: Clear Sign Certified Drawing for 3t Unit lPrepared B 04/04/201
04:50P
Service Clearance
LOCATION
DIMENSION
CONDITION
than 11219 mm
. UNt scarce t "rlpumed imponel
A
1" 1457 mmi
• Na Ns[anrxt, rmsenknce DIIIM opt"
• Rew minded serrkedearerce
32an 355mm
.hWrtlurl XI,IWe
s2an 1087 mm
•Slef.ee W*W feria," tp.ded a .,met.L m.s wd
B
36M 914 mm
., wood,8"er
.Surgce beNref sereker"¢]Corks tlnrrcarld-01-
I
&u
.0 sources wRNn 1P unit fres shhdake
f
C
Y'm 924-1
Ssft cmders." d,.m"used
1l.hr457 mm
. Mrlhq.o..r
d.raa
4" 1219 nerl
.ND flue d, e.tta Inft.fkd,sud.te"—botba mttrw
42an 1087 mm
•SurfKe"e*d serelcerls rgsd.d a meth. m. wafLarctM7 um4
D
364, 914 mm
seri!,"Netrk. llirssalehetha e. .. wood, fib! lass
SpeNl
•ChKkfOr&*ent uNts ahfft fresh ab".Ims wffhn 16". t tNs urW%
011e VAd
su.p{.�avm cl�llaenly Nr 3uwrce Orl 8rlj
.pdkatka d.ra.rR overhe.d abstrudlon a fart]"] demrcef.
Packaged Rooftop Builder 1.40 Page 6 of 11
Performance Summary For 3t Unit
Droject: Clear Sign 04/04/201
3repared By: 04:50PI
Part Number:48KCDA04A2A6-OAOAO
ARISEER: ................................................................................................................................................... 14.00
Base Unit Dimensions
UnitLength: .............................................................................................................................................
74.4 in
UnitWidth: ...................................................................... ........................................................................
46.8 in
UnitHeight: .............................................................................................................................................
33.4 in
Operating Weight
1200 CFM
BaseUnit Weight: ....................................................................................................................................
490 Ib
Medium Static Option Belt Drive: .........................................................................................
..................... 10 Ib
Accessories
59.4
Ultra LOW LEAK - Vertical EconoMi$er X with solid-state W7220 controller: .......................................
50 Ib
TotalOperating Weight: ...........................................................................................................................
550 Ib
Unit
UnitVoltage -Phase -Hertz: ...............................................................................................................
460.3-60
AirDischarge: ....................................................................................................................................
Vertical
FanDrive Type: .......................................................................................................................................
Belt
ActualAirflow: ........................................................................................................................................
1200 CFM
Site Altitude:
0 ft
Cooling Performance
CondenserEntering Air DB: ....................................................................................................................
95.0
F
EvaporatorEntering Air DB: ....................................................................................................................
80.0
F
EvaporatorEntering Air WB: ...................................................................................................................
67.0
F
EnteringAir Enthalpy: ...........................................................................................................................
31.44
BTU/Ib
EvaporatorLeaving Air D13: .....................................................................................................................
59.4
F
EvaporatorLeaving Air WB:....................................................................................................................
57.5
F
Evaporator Leaving Air Enthalpy: ..........................................................................................................
24.70
BTU/Ib
GrossCooling Capacity: .......................................................................................................................
36.41
MBH
GrossSensible Capacity: ......................................................................................................................
26.71
MBH
CompressorPower Input: .......................................................................................................................
2.95
kW
CoilBypass Factor: ...............................................................................................................................
0.113
Heating Performance
VoltageRange: ...............................................................................................................................
HeatingAirflow: ......................................................................................................................................
1200
CFM
EnteringAir Temp: ..................................................................................................................................
70.0
F
LeavingAir Temp: .................................................................................................................................
115.5
F
GasHeating Input Capacity: ...................................................................................................................
72.0
MBH
GasHeating Output Capacity.. ........................................................................................................
0.0 159.0
MBH
TemperatureRise:..................................................................................................................................
45.5
F
Supply Fan
External Static Pressure: .........................................................
................................................................ 0.50 in wg
Options / Accessories Static Pressure
Economizer: .................................... ................................
................................................................. 0.04 in wg
Total Application Static (ESP + Unit Opts/Acc.):..................................................................................... 0.54 in wg
FanRPM: ................................................................................................................................................. 846
FanPower: .............................................................................................................................................. 0.44 BHP
NOTE: .............................................................................................. Selected IFM RPM Range: 770 -1175
Electrical Data
VoltageRange: ...............................................................................................................................
414-606
Compressor#1 RLA:.................................................................................................................................
5.8
Compressor#1 LRA: ................................................................ ..................................................................
38
OutdoorFan Motor Qty: ...............................................................................................................................
I
OutdoorFan FLA(ea): ..............................................................................................................................
0.5
IndoorFan Motor Type: ..........................................................................................................................
MED
Packaged Rooftop Builder 1.40
Page 7 of 11
Attn: Tag:
Approval:
----------- -------
70 7/r
------
EXISTING CURB LAYOUT
I
LA,
SUPPLY
s
r
Ji
r
7o sre^
I 17-
17
7-18"
M 7/B'
CURB SHOWN IS CDI STANDARD CONFIGURATION CDI RESERVES THE RIGHT TO
CHANGE LAYOUT WITHOUT NOTIFICATION. IF CURB IS NEEDED IN A DIFFERENT
CONFIGURATION CDI MUST BE NOTIFIED PRIOR TO PLACING AN ORDER.
CDI
i 400116 ---JJ7 7/8'
14510-4000
EXISTING CURB LAYOUT
LA,
SUPPLY
RETURN
�+
18 11/18"
I 17-
17
7-18"
M 7/B'
CURB SHOWN IS CDI STANDARD CONFIGURATION CDI RESERVES THE RIGHT TO
CHANGE LAYOUT WITHOUT NOTIFICATION. IF CURB IS NEEDED IN A DIFFERENT
CONFIGURATION CDI MUST BE NOTIFIED PRIOR TO PLACING AN ORDER.
CDI
i 400116 ---JJ7 7/8'
14510-4000
Performance Summary For 3t Unit
project: Clear Sign 04/04201
'repared By: 04:50PP
Indoor Fan Motor FLA: .............................................................. ................................................................
2.5
CombustionFan Motor FLA(ea): ............................................................................................................
0.25
PowerSupply MCA: ...................................................................................................................................
I I
Power Supply MOCP (Fuse or HACR):......................................................................................................15
78.2
DisconnectSize FLA: .................................................................................................................................
10
DisconnectSize LRA: ................................................................................................................................
57
ElectricalConvenience Outlet: ..............................................................................................................
None
Control Panel SCCR: 5kA RMS at Rated Symmetrical Voltage
Acoustics
Sound Power Levels, db re 10E-12 Wafts
Advanced Acoustics
Advanced Accoustics Parameters
1. Unit height above ground: ................ ...... * ... * 30.0 ft
Discharge
Inlet
Outdoor
63 Hz
83.6
85.5
78.2
125 Hz
76.4
73.6
78.0
250 Hz
66.0
59.2
74.2
500 Hz
62.7
58.8
73.3
1000 Hz
59.3
58.5
70.6
2000 Hz
53.8
52.5
66.0
4000 Hz
54.9
47.4
62.4
8000 Hz
49.1
39.0
56.9
A -Weighted
66.7
64.7
76.0
Advanced Acoustics
Advanced Accoustics Parameters
1. Unit height above ground: ................ ...... * ... * 30.0 ft
:**"**
'2. Horizontal distance from unit to receiver: ...........
50.0 ft
3. Receiver height above ground: ............................
5.7 ft
4. Height of obstruction: ...........................................
o.0 ft
5. Horizontal distance from obstruction to receiver:
.0.0 ft
6. Horizontal distance from unit to obstruction: ........
0.0 ft
Detailed Acoustics Information
Octave Band Center Freq. Hz
63 125 1250 500 1k I 2k 4k 8k Overall
A
78.2 78.0 74.2 73.3 70.6 66.0 62.4 56.9 82.9 Lw
B
52.0 61.9 65.6 70.1 70.6 67.2 63.4155.8175. LwA
C
45.8 45.6 41 8 40.9 38.2 33.6 30.0124.5150.5 L
D
19.629.533.237.738.234.831.023.443.0 A
Legend
Packaged Rooftop Builder 1.40
Page 8 of 11
Project: Clear Sign Performance Summary For 3t Unit
1 Prepared By. 04/04/2004 50P
A Sound Power Levels at Unit's Acoustic Center, Lw
B A -Weighted Sound Power Levels at Unit's Acoustic Center, LwA
C Sound Pressure Levels at Specific Distance from Unit, Lp
D A -Weighted Sound Pressure Levels at Specific Distance from Unit, LpA
Calculation methods used in this program are patterned after the ASHRAE Guide; other ASHRAE Publications and the AHRI Acoustical
Standards. While a very significant effort has been made to insure the technical accuracy of this program, it is assumed that the user
is knowledgeable in the art of system sound estimation and is aware of the tolerances involved in real world acoustical estimation.
This program makes certain assumptions as to the dominant sound sources and sound paths which may not always be appropriate to
the real system being estimated. Because of this, no assurances can be offered that this software will always generate an accurate
sound prediction from user supplied input data. If in doubt about the estimation of expected sound levels in a space, an Acoustical
Engineer or a person with sound prediction expertise should be consulted.
Fan Curve
0.9 1.2 1.5 1.8 2.1 2.4
Airflow (CFM - thousands)
RPM = 846 BHI' = 0.44 Maximum RPM = 2100 Maximum BHP = 2.90
Note: Please contact application engineering for selections outside the shaded region.
SC - System Curve RP - Rated Point
r-dcRdgeu moonop tsumer 1.4U Page 9 of 11
100 RPM
1300 RPM
1500 FM
.8
g
3.00 BH
900 RPM
.4
.2-
2B700
0--
700RPM
X
a--
i
2.00 B
8
500 RPM
4-
B
BH
2
1.00 BH
0.50
H
n0 03
O6
0.9 1.2 1.5 1.8 2.1 2.4
Airflow (CFM - thousands)
RPM = 846 BHI' = 0.44 Maximum RPM = 2100 Maximum BHP = 2.90
Note: Please contact application engineering for selections outside the shaded region.
SC - System Curve RP - Rated Point
r-dcRdgeu moonop tsumer 1.4U Page 9 of 11
Unit Feature Sheet for 3t Unit
Project: Clear Sign 04/04/201
Prepared By: 04:50PIV
1�•rcer
WeatherMakee — 48KC
PACKAGED ROOFTOP GAS HEATING/ELECTRIC COOLING UMTS -14 SEER
3, 4, 5 TONS
- •�l�lpalla�r
elr
�Vl r LL»n.
COMPG
WEATHERMAKER SERIES
WeatherMaker 48KC (14 -SEER) units are one-piece gas
heating, electric cooling units that are pre -wired and charged
with Poron (R-414) refrigerant They are factory tested in both
heating and cooling modes, and rated In accordancewith AHRI
Standards 210240. We atherMaker units are designed in
accordance with UL Standard 1995, and listed by the
Underwriters' Laboratories.
Approved and certified by:
urs or. wxa.
C L US�'
WW— F. re,•oo•+
a r•extwma.d.atw
sae
•ru•�rw
Cortltled to ISO 9001
STANDARD FEATURES INCLUDE
• Pumn (R410A) HFC ratr;0enint
• Meets and exoeedsASHRAE90.1energy efficiency levels
• Stroll compRssoos with intemaline break and overload protection
• Sirgla-sfagecooling capaodyconhol
• SEER'supto14.0.EER'supto12.0
• Asutrol*r'refrgerantmeterngsysiam
• Exciusim noncorrosive conposite condensate panin accordance with
ASHRAE Standard 62, sloping design, side orcenterdran
• Standard cooling operation up toI15•F(46'G'anddown to40'F(4•C)
- down to 251 F (41 C) with winter start M.
• P"aintedexterior panels and primer -coated irteriorpanelstested to
500 hours sett spray protection
• Fully insulated cabinet
• Exclusive IGCsofd4statccnlmlforon-boarddisgnosticswithLED
error code designation bumercontrol logic and energy saving indoor
fan motor delay
•
Low Moor models that meetCalifornia Air QuardyWriagenrant
• Induced droll gas heat combustion design
• Redundant gas vaNaswith uptotwostages ofheating
•
Low Pressure and high oressum switch protected.
MAINTENANCE FEATURES:
• Aeeessponelswith easyg-V handles
•
Innovative aasystaiting.no-strpscraws on unit access panels
• Two-inch disposable return airf3kers and Toct%ss filter access door
• DirectDrie— ECMirdcormoflorisstandardwithoptionalbetdrive
systems
• Terminal board fscUdating single safety circuit troubleshooting and
sinpified control box arrangement
• Exclusirm IGCsoid-stotecenbolforonioanidiagnosticswith LED
error code designation. bumercontrollogioand energy saving indoor
fan motor delay.
INSTALLATION FEATURES:
• Thou-the-bottompowe7entrycapab6ty
• Single point gas and electric connections
• Ful perimeter bass tai with bui ton rigging adapters and fork slots
• Field convertible from vertical to hor¢ontelairflow
STANDARD WARRANTY:
• 10-yearheatexchanger—l5-yearsimniesssteel option
• 5-yearcampcessor
• 1-yearpri is
• Manyoptionalupgradeselsoavailable
OPTIONS INCLUDE BUT ARE NOT LIMTED TO:
• Prerrierl-ink and RTU Open Multi Protocol DM Controls
• SupplyandRetumAirSmokaDetectors. high stationnptors
• Louvered condensercoilguanis
•
Disconnect s%*ch and convenience outletoptions
• StainkssSteelbeat exchangeroption
• Corrosirnresistant corlcosting.
• Koh ata"' netor options
• Patented 4 unid 4Qaf adaptive dehumiti fication system. This option
also includesMotormaster I oordmis
• Mngedaccesspanets
• hKegrated econcn*ersystem. Standard and L%v Low Leak versions
For a eon"to list of options and accessories refer to the Product Data
Catalog forthis unit.
raCKagea Koonop burner 1 AU Page 10 of 11
Spec Sheet for 3t Unit
Project: Clear Sign 04/04/201
Prepared By: 04:50P
Packaged Rooftop Builder 1.40 Page 11 of 11
FOR
MAY 2 4 2016
,Ci y ofTykWite
OAdING DIVI N
►�'tti����fi5:JJ W A Sy�ti
STRUCTURAL
CALCULATIONS
Clear Sign RTU
12870 Interurban Avenue South
Tukwila, Washington
APRIL 12, 2016
PREPARED FOR:
Seattle Mechanical
899 West Main Street
Auburn, Washington 98001
PREPARED BY:
Moore Engineering Group
21902 96th Avenue SE
Snohomish, Washington
G ! 18959 �
�AL ��`�, Moore
NAL Engineering RECEIVED
•�` Group CITY 4F TUKWILA
MAY 10 2016
7s PERMIT CENTER
GENERA, STRUCTURAL NOTES:
I. ALL MATE IAI. S WOR,KMANStUp, i3ES1GN, AND 4X)NSTRIjCTION S1iALL C 0NFORM TC}
'f`NE-S , NOTFS AND TIIC INTERNATIONAL BUILDING CODE, (llI( �, 2012 LDITION.
2. D SIGN LOADING CR11VR[A:
ROOF UVELOAD ...................... 25PST
MECHANICAL UNIT ..................... 830 POUNDS
EARTHQUAKE ................ . _ _ _ ..... - 1�xi
-0.947
SITE CLASS D to !
WIND .... . . . .. . ...... . ............... 85 MPH, EXPOSURE B
.3. :STRUCTURAL CALCULATIONS AND SKF -70 ES SHALL HE USFD IN C.ONJIINCTION
WTM MECHANICAL DRAWMS FOR I31DUUNG ANn GCANS'TRUCTTION. C ONTRAC:I.OR
SHALL VERIFY DIMUNSIONS ANDCONDMONS FOR CO MPATIRILITY AND SILiLL
NOnFv ENGINE -FA OF ALL DISCRE-pAN I: S PRIOR TO CONSTRLiCTTON.
4. CONTRAC-11OR SHALL VERIFY ALL t:XISTINCi DIMENSIONS, NOOER SIZES AND
C'ONDMONS PRIOR'R) C OMMI714CING ANY WORK. ALL DIMFXSIONS OF EXisTiNG
C()NS'IRijC-n0N SHOWN ARE IN'IRNDF-:n AS CIIIT)F3,1N> S ONLY AND MUST BE
VERIFIED. THE EXISTING CONDITIONS SHOWN ON TIMI SKETCHES ARI+. BASED
EMIER ON Sn E ORSERVATION.ORIGGINAL DRAWINGS OR WERE ASSUMED BASED ON
I XPF D CONDITIONS. IF THE FXfSTING CON.DITTONS LTO NOT C:i�tD. Flt Y MA►TC'iI
T!M CONU1'17UNS :MOWN ON TIME SKE-TCFIES` OR IF THF I <XISTING MATERIALS ARE
OF QUF.STIONABLi OR 9UI3ST'ANnARn QUALITY. NOTIFY THE 8WHNIF'ER, PRIOR TO
COMMENCING ANY WORIL
S. CONTRAL'FORSHALL PROVIDE 'ITMPCDRARYBRACING FORTI.fESTRtX7UREA.Nn
STRI J[" T' ;P AL COI+MNL:Pf IS 1JNTII . A [ J, ,,FR4 A,L OONNEMI ONS HA VF RF.FN
COMPLRI-ED IN ACCORDANCE WMI-I`HL DRAWINGS,
G- CONTRA01OR SHAI.t, BE RESPONSIBLE MR ALL SAFFI'V PRECAUTIONS AND 'ME
METHODS. TECIINIQUE& Sl+QmNCES ORpROCEDURCS REQUIRED FOR THE
CO;t PLI;110N OF THE WORK.
7. Sl=—T ME [A 1, SC:R'F?WS SHALL CON 3TJR'M 10 THF;, AMF.RiCAN IRON AND S' ,v -1,
INSTITUTE (AZT) `SPECIFICATIONS FORTHE DESIGN OF Cat41.1}-MRMFD STEEL.
STRUCTURAL MI MBI:.RS7.
!I. rONNECT TII UNIT" I OTHF METAL CURB ADAIPtER AND THE METAL Cum AI)API-ER
Toiiili k:XtTrING METAL CURB WI'M A MINIMUM OF (3) #!a SIj,Cl::I' NtIaT'JkI. SCREWS
ON EACII SIDE 01F l*HF, tJNIT - RACE ONE SCMW Al -6"11) H' FROM EACIi CORNER OF
THL UNIT AND TUE THIRD SCREW A'1- APPROXIMATELY 7111, MIDDU OF 1'HF UNIT ON
EACH SIDE.
t-4
G
"a0
t'
e,(- 1-4 lq ,
Moore PROJECT: R: V o
Engineering DW
C"_-�,.. �k�r. 1 k"�
Group SCALE:
SHED
PROTECT' DESCRY MON; The project consisfs cif the replacement cf an existing rooftop
mechanical unit
LOADS: LIVE
25 PSF
DEAD Roofing and re -roof
5.0
1/2 Plywood sheathing
1.5
2x6 6 24" o c-
1.1
4x14 0 8' o.c.
1.5
Insulation
1.0
MEP
2.0
Ceiling & Lights
2-0
Total Dead
14.1
DRAD 4 uvE 09.1 PSS
WIND 85 mph, Exposure B
Latitude
47.487
Longi
-122.275 -
Site Clas.S
D to E WA ONR
SDs (D)
0,997
Scs (E)
0.897
sm a
0.947
I UtPNIENT
Existing RTU -1 New RTU -1.
Unit 655 550
E)d%dng Cu rb 1.30 130
Curb Adapter 200
Total 785 pounds 780 Winds
fhmensiMS 74-x47"x57" high
Moore F4ZaueEcr: € R: KWM
Engineering CLEAR SIGN RTIJ DATE: 4'12/16 � l�
Group
Sr=
Deign Maps Summary Report
ELM Design Maps Summary Report
User -Spec fled Input
Report Title Clem Sign RTU
Sat hl5ril 9, 2415 17:14:21 UTC
Building Code Reference Document 2012 International Building Cade
Cwhtrh udh-cs UXS howird data avallarz in zwe'l
Site Coortlinatim 47.4870N, 122.27S°W
Site So11 Classification Sike Class D -"Stiff Soil"
Risk Category I/II/III
-A H4 QM `fit Y4,_
M5` ', 9u=0 1G �
-
„F.4-;.
Vashaq
O VASY
Des Wine% �
USGS-Provided output
Page 1 aft
5, = 1.495 9 SKw = 1,495 g 'Sw = 0.997 g
5. = 0.560 g 'bra = 0-841 g 5a. = 0.560 g
For infnrmatinn on lura 11w SS brut S1 values above have been w ulatea trom probabiltstfc (risk -targeted) and
detuministic jimund mort%ns in Mt direW n nr m ixi,nurr4 Wri1wrtal reswnse, txcasr rctum to the appircatron and
_'"-IIx the `2009 NEHRP" buildmp wade reference document.
I'M —
I
1.35
1.2d
1 06
a.Co
943
0.33
0.3% r", — ,
a.Co
Cta7 Q2C a as OX8 alba I -CC L20 1.40 1.68 1.0 2M
MCEs Response Spectrum
1.10-- [resign Response spectrum
1 xv
413
a.ca
4.70
o.4a
D,2a
Q29
COO
D.t� a,7a a ais CC Loa 10 1, 24 1.0 1.0 20D
PerU4 T Czw4
http://rbpi-quake-cr usgs.gov/designm*Vud-mmmarY-ol1- empiwe minimal&.latitud.,. 4/g/2016
L csi,gn Maps Summary Report
Design Maps Summary Report
Wer—Spedfied input
Report WHe Clear Sign FLTU
tint ADMI 9, 2816 17:14:38 UX
BulldIng CbdC Refemnoe Document 2012 Internal onai Building C.ndeL
(WnIch u ''Ums USGS. hazard data avallaMe In 7DOS)
Site Coordinates 47.4870N, 122.2759W
Site 501"1 Classifration Site Class E - -Soft. Clay Sail"
Risk Category 1/lI/IiI
$AS
�w
7 [ h ..'rk _ rs3lAah
Vashaq
'I
"r ; y,� M;L
Mapl* Valley
Des Moina%, IP
USGS—Provided Output
Page l oft
Ss = 1.495 g S,w = 1.346 9 Sea = 0.897 g
S. _ 0.560 g Sat = 1.345 g S. a 0.897 9
For information can how tt►c SS and S1 values above havr. bpen &W-attd from probabd¢s= (rtsk-tartgeWl) and
deterministic ground motions in !hr dirrAAiun of moxrmum horizontal re spanrp, fbrsiic MW, -n to the awllcatron and
select the "2039 NrHRV bvildna coda reference doa,me!nt.
MCEn Response Spectrum
I.Jd
a�
1.I1
D y7
a �o
o_sc
a_za
0.la
a as
0 00 Q 20 o io Ca 0.9!� 1.00 1.20 1.40 1 ao 1 00 2.6
t wind« T teed
Design Response Spectrum
Dal
o z.
as
a au
,a a:3
ax
azr
o an
01"
v.C* L-0-1
0..00 a22 a..a aoa RAM LJO 3.20 1 to ! t0
ipeld" t {sed
bttp:1/chp2- tbquakc wr:usgt,.gav/desig= ; tLsisummaty.pbp?tcmpkw—mEnimiJ&lacitu... 4,+9/2016
wnitl data
4 Q.LD/HDD,LEiD/H[)T,LDT/Mlq,g,ElM14D.UM
Combination Hting/Caaf ng Units
tab "0.
No
_s_ :
4t ib►051
1y��
t +eta t
tto tbrn
-
� 1t � wbi�l
rn tttm
t+
s
C70 tiro M k�ios
Cbe
lommm
I
um
tC3+ tt10N%b �
"W
>tf.stwye
Sm
jP"
aw
7Y
The
12.
w
ih.
—
o
— —
t
V is
a t.
V Q
3=
i
1 a
i
+�
t
ism
A
WPMWseneec
�
t Yt
dx
—_
WHAM tlt�.py
7'rgttl�
en
ID�
u.�MWOttMti
t�t�>�
Mf1
Piftttttit.Mamoo dart
tats
oe:Oftoldwe
M
No
- - R T mt9nK QSew+
tili.slAtbl>�R � �1
— no m!s
Cava COM
fCa"O eAif�altaCi gf. aono+O.os
;G f % o� spy t"„ICy� JIM *MW*d -os mmm raw eM
E
to
� �
-
� 1t � wbi�l
s
C70 tiro M k�ios
us11a7p
� to
t
sPO4!
I
cn to
tMM2�
of a4 m n 70.t�rai
®�
jP"
!CR
7Y
The
12.
w
oa
a• AQ pw wlfne
Y
D
t
V is
a t.
V Q
3=
i
1 a
i
+�
t
ism
A
e
tt►=S
�
t Yt
tots
Sd+lVroo
tats
bit
en
u
tats
No
t3
rtm t tan
t ♦t.m t
1
2wto
2�o
» co
10
1 II
t
Asa
f72sf
—
�ttYae
ttNas
e4.�34
-
a
s!
ti:
id
A 45
s _
�
s
_
z
ar
m -
t�
- - R T mt9nK QSew+
tili.slAtbl>�R � �1
— no m!s
Cava COM
fCa"O eAif�altaCi gf. aono+O.os
;G f % o� spy t"„ICy� JIM *MW*d -os mmm raw eM
E
cook t� rim i*-4ftwfflb"�, c1M'„ys a.+r « . WIRIM nxm, tr oR..
tom, t woman 20 -acs �,arruax FWw48HAAsa apses 4 -db rr�renx
48HO.3p
s
C70 tiro M k�ios
�a
cn to
of a4 m n 70.t�rai
®�
The
V is
a t.
t lka!x% C320.4rdo
2 �i
cook t� rim i*-4ftwfflb"�, c1M'„ys a.+r « . WIRIM nxm, tr oR..
tom, t woman 20 -acs �,arruax FWw48HAAsa apses 4 -db rr�renx
48HO.3p
Unit Report For 3t Unit
un(t PWm*Wft s MM"VM M arc.) 41Y�tglif (b.j �'.
Ufo
KWft
..... Very a� I vagi a -- r nc:::..,�
LmHeW
&mss SMOG GmvmWW umbftaces na r ve Appuft .
ForaecrdWMMIMWdm*&,nWbMwmvfr
Wa&o4dow
'in" rand Fftm
Retropir
Cardwundlon
AUCo-AVCu
Buse Ebm mmcnankad Gorbgm
Srndattd Pada9hl
'ash
1 -Year pgwsw3
5-Yesr PBmKm .)
No ammol Parades Arend a►sl
NOM W" WQ ra * comma 599 far c" of P achm OW amwimsraO hL
Ordetno Warrnuf
Packaged Rooftp Buiid!r 1.40 PMG 3 OVI 1 *74 121-
- - Ofir'tiHpd Drawing, fbr 3t Unit
r � K, • •anvn ; '"' ._a r w nResi a raaart+
e. O am r now r•c wjyQ i� q yiary`r7y
6 �RMt3. r A Tff� �� nJ�. �2C' T7Qf
� 49 ��IrNn
I
lrJu.IWI !
W
moo
rna
11Li: ' "'itr Um l =
w
•L—
ll
y t ff(}� r1Yff!'�7aM
1;
ta
iri'
mw nv%
n� il�r � _
(fes- 11iT1� i
-7 asst al w, 111, ... r R to p
[oiaAlly t.s tti' +IRCrr'.tai
P R*oMp Odor 940
Pap
4di1
94
•
nil
,:MAS
f alrn+r Jli
w •11 W un r...r.rr
� r
R I !N'to, W
— y„r. �
• ••• •� x. narsa...a mw rlr .
. w.•w.ne.ernw
«fill• !� �±�1
r urs, n w mfr•:
• ra-lr itr #,rarrtirr
iri'
mw nv%
n� il�r � _
(fes- 11iT1� i
-7 asst al w, 111, ... r R to p
[oiaAlly t.s tti' +IRCrr'.tai
P R*oMp Odor 940
Pap
4di1
94
•
nil
,:MAS
�,•; rwrl
� r
•
�. T.w h 4.yam_
«fill• !� �±�1
iri'
mw nv%
n� il�r � _
(fes- 11iT1� i
-7 asst al w, 111, ... r R to p
[oiaAlly t.s tti' +IRCrr'.tai
P R*oMp Odor 940
Pap
4di1
94
m
r
N&AA7m
WAR
c �tca-
C�mlollll1i�� � 0111{4i1Gwf� 71RI�R1b ~r 7-WC4a00
i1011Ca�T�IIO:t1iDN�R�K��gpgt �
clawsir Performance Summary For M Unit
rt Nvmber,48KCDA04A2A84AOAO
W in
tae eett....__.____-..__.:.., �'w�_._...-_�....a:::�...,:::....:� .�..�. �...,,,...,..,4W lb
..
Utt* L M LEAK - l Ewnaff&r)t vfih Wd.sb, Wr= cntmftr.,_ .......
Wit:
Unit VsWgo4�edt ...... ... .,.. _
_ 495440
Air
............:_:..
sty ,��.....�._
.._.w.�..�...� ..�
.:_
Coofm ftft"hm"
EvoomfortmWpa $$A
GrCes
or+aas Sbnsfe _� ..�_ ..... _.__._ ___ ..... ,__ , ............ _ ___ --- •».... _..1ti.�s
CaMPtaasar PbMW k*Klt
Flew Perrunusrm
Lss*g Ai'..........'�.��
..._ ......._..._._._._..... _ .,......_.__.__.__'!II! 6
'Cas Hurling kp*C*x ft,
_--._ . . _ ...
Te�v
9n
Forl: RPM,
t=ar
shmidew
54
Ind +r MottType _ .� .__... ....._.. -._ .. _._....+� ...... __ —.. _._ __ .......... _ .._—,, Q.6
_.._.__..._ . .._._.._ _._..._ ..... MID
STUB
F
F
t3TUrlb
MOH
M8H'.
mo
CFM
F
moil
9V am
F
In wg
in
in ag
Flq.'�
Padtaog d Roof" StAldw 1.40 - _� ... Page 7 of 11
1��
-4e K
5* -4- -Ziff
p
st
12
; - IT t5
17f-
4 7C
fo
44 14' )41,AA 'tO
'27 ) t-- 6
At- —_ — -
It
V4 —.4 4
446 Id 1.
j" L
vtgl nieti. "f
Woore PotOJECT:
lengMeenng CLO&L'15i cr. k t f 2_0 cLkm. -
Group SCALE--
� c 0. � C� c-,
t3k It -74
P4 ;r4jj4j;�
T
.17+
PROJECr.
DATE::"
Group -SCALE: SmEr
5/1/2017
City of Tukwila Allan Ekberg, Mayor
Department of Community Development Jack Pace, Director
DAWNA PETET
899 W MAIN ST
AUBURN, WA 98001
RE: Permit No. M16-0075
CLEAR SIGN COMBUSTION
12870 INTERURBAN AVE S
Dear Permit Holder:
In reviewing our current records, the above noted permit has not received a final inspection by the City of Tukwila Building
Division. Per the International Building Code, International Mechanical Code, Uniform Plumbing Code and/or the National Electric
Code, every permit issued by the Building Division under the provisions of these codes shall expire by limitation and become null
and void if the building or work authorized by such permit has not begun within 180 days from the issuance date of such permit, or if
the building or work authorized by such permit is suspended or abandoned at any time after the work has begun for a period of 180
days. Your permit will expire on 6/27/2017.
Based on the above, you are hereby advised to:
1) Call the City of Tukwila Inspection Request Line at 206-438-9350 to schedule for the next or final inspection. Each
inspection creates a new 180 day period, provided the inspection shows progress.
-or-
2) Submit a written request for permit extension to the Permit Center at least seven(7) days before it is due to expire.
Address your extension request to the Building Official and state your reason(s) for the need to extend your permit.
The Building Code does allow the Building Official to approve one extension of up to 180 days. If it is determined that your
extension request is granted, you will be notified by mail.
In the event you do not call for an inspection and/or receive an extension prior to 6/27/2017, your permit will become null and void
and any further work on the project will require a new permit and associated fees.
Thank you for your cooperation in this matter.
Sincerely,
Bill Rambo
Permit Technician
File No: M16-0075
6300 Southcenter Boulevard Suite #100 • Tukwila, Washington 98188 9 Phone 206-431-3670 • Fax 206-431-3665
Citv of Tukwila
Department of Community Development - Jack Pace, Director
December 28, 2016
Kelly Parfitt
899 W Main St
Auburn, WA 98001
RE: Request for Extension #1
Permit Number M16-0075
Dear Ms. Parfitt,
Allan Ekberg, Mayor
This letter is in response to your written request for an extension to Permit M16-0075. The Building
Official, Jerry Hight, has reviewed your letter and considered your request to extend the above
referenced permit. It has been determined that the City of Tukwila Building, Division will be granting an
extension to the permit through June 28, 2017.
If you should have any questions, please contact our office at (206) 431-3670.
Sincerely,
Rachelle Ripley
Permit Technician
File: Permit No. M15-0075
Tukwila City Hall • 6200 Southcenter Boulevard • Tukwila, WA 98188 • 206-433-1800 • Website: TukwilaWA.gov
Attention: Building Inspector.
I am submitting a written request for a permit extension on M16-007.5 We hada Mechanical
Inspection and Waiting on the electrical contractor to complete his work and finalize the electrical
permit so we can finalize our mechanical permit.
Thank You
Kelly Parfitt
Seattle Mechanical
) Request for Extension #
Current Expiration Date: i
Extension Request:
n Approved for days
LJ Denied (provide explanation)
Signature/Initials
RECEIVED
CITY Of TUKWILA
DEC 2 0 2016
PERMIT CENTER
11/1/2016
City of Tukwila Allan Ekberg, Mayor
Department of Community Development Jack Pace, Director
DAWNA PETET
899 W MAIN ST
AUBURN, WA 98001
RE: Permit No. M16-0075
CLEAR SIGN COMBUSTION
12870 INTERURBAN AVE S
Dear Permit Holder:
In reviewing our current records, the above noted permit has not received a final inspection by the City of Tukwila Building
Division. Per the International Building Code, International Mechanical Code, Uniform Plumbing Code and/or the National Electric
Code, every permit issued by the Building Division under the provisions of these codes shall expire by limitation and become null
and void if the building or work authorized by such permit has not begun within 180 days from the issuance date of such permit, or if
the building or work authorized by such permit is suspended or abandoned at any time after the work has begun for a period of 180
days. Your permit will expire on. 12/27/2016.
Based on the above, you are hereby advised to:
1) Call the City of Tukwila Inspection Request Line at 206-438-9350 to schedule for the next or final inspection. Each
inspection creates a new 180 day period, provided the inspection shows progress.
-or-
2) Submit a written request for permit extension to the Permit Center at least seven(7) days before it is due to expire.
Address your extension request to the Building Official and state your reason(s) for the need to extend your permit.
The Building Code does allow the Building Official to approve one extension of up to 180 days. If it is determined that your
extension request is granted, you will be notified by mail.
In the event you do not call for an inspection and/or receive an extension prior to 12/27/2016, your permit will become null and void
and any further work on the project will require a new permit and associated fees.
Thank you for your cooperation in this matter.
Sincerely,
Bill Rambo
Permit Technician
File No: M16-0075
6300 Southcenter Boulevard Suite #100 • Tukwila, Washington 98188 • Phone 206-431-3670 • Fax 206-431-3665
PERMIT COORD COPY
PLAN REVIEW/ROUTING SLIP
PERMIT NUMBER: M16-0075
DATE: 05/10/16
PROJECT NAME: CLEAR SIGN COMBUSTION
SITE ADDRESS: 12870 INTERURBAN AVE S
X Original Plan Submittal
Response to Correction Letter #
DEPARTMENTS:
kT Aux,
Building Division
Revision # before Permit Issued
Revision # after Permit Issued
Atl\ �1)+ s-p-f�
Fire Prevention IN
Planning Division ❑
Public Works ❑ Structural ❑ Permit Coordinator
PRELIMINARY REVIEW: DATE: 05/12/16
Not Applicable ❑ Structural Review Required ❑
(no approval/review required)
REVIEWER'S INITIALS: DATE:
APPROVALS OR CORRECTIONS:
Approved
x
Corrections Required ❑
(corrections entered in Reviews)
Notation:
DUE DATE: 06/09/16
Approved with Conditions e
Denied ❑
(ie: Zoning Issues)
REVIEWER'S INITIALS: DATE:
Permit Center Use Only
CORRECTION LETTER MAILED:
Departments issued corrections: Bldg ❑ Fire ❑ Ping ❑ PW ❑ Staff Initials:
12/1812013
IECS INC
Home Espanol Contact
Safety & Health
CWashington State Department of
Labor & Industries
IECS INC
Page 1 of 2
Search L&I I
A -'G Lidex Help My L&I
Claims & Insurance Workplace Rights Trades & Licensing
Owner or tradesperson PO Box 19252
SEATTLE, WA 98109-1252
Principals 206-939-9495
HUMPHREY, GEORGE, PRESIDENT KING County
Doing business as
IECS INC
WA UBI No. Business type
601 639 846 Corporation
License
Verify the contractor's active registration / license / certification (depending on trade) and any past violations.
Construction Contractor Active.
..........................................................................
Meets current requirements.
License specialties
HeatingNent/Air-Conditioning and Refrig
(HVAC/R)
License no.
IECS***044QL
Effective — expiration
11/13/1996-11/20/2016
Bond
$6,000.00
No bond accounts during the previous 6 year period.
Effective date
Insurance
............... _............
11/20/2001
Nationwide Mutual Ins Co
$1,000,000.00
Policy no.
N/A
ACPACT07515636456
Received by L&I
Effective date
07/29/2015
08/0112013
Expiration date
08/01/2016
Insurance history
Savings
(in lieu of bond)
$6,000.00
Received by L&I
Effective date
11/20/2001
11/20/2001
Release date
Impaired date
N/A
N/A
Savings account ID
Savings history
Lawsuits against the bond or savings
...._.......
No lawsuits against the bond or savings accounts during the previous 6 year period.
L&I Tax debts
..........................................
https:Hsecure.Ini.wa.gov/verify/Detail.aspx?UBI=601639846&LIC=IECS***044QL&SAW= 5/27/2016
IECS INC Page 2 of 2
No L&I tax debts are recorded for this contra icense during the previous 6 year period, but some c
may be recorded by other agencies.
License Violations
No license violations during the previous 6 year period.
Workers' comp
Do you know if the business has employees? If so, verify the business is up-to-date on workers' comp premiums.
L&I Account ID Account is current.
845,304-01
.................................
Doing business as
SEATTLE MECHANICAL
Estimated workers reported
Quarter 1 of Year 2016 "11 to 20 Workers"
L&I account representative
T4 / ALISON WOODWARD (360)902-4629 - Email: WOAL235@lni.wa.gov
Workplace safety and health
Check for any past safety and health violations found on jobsites this business was responsible for
Inspection results date
03/31/2015 Violations
Inspection no.
317935645
Location
13028 Interurban AVE
Tukwila, WA 98178
Inspection results date
04/09/2013 Violations
Inspection no.
316583194
Location
940 NE Park Or
Issaquah, WA 98029
Inspection results date
12/11/2012 Under appeal. The results of the inspection are
Inspection no. being challenged.
316257716 Date of appeal
Location 10/12/2015
3325 South 116th Building #2
Seattle, WA 98168
Inspection results date
04/10/2012 Violations
Inspection no.
315954495
Location
300 Park Ave
Bremerton, WA 98337
0- Washington State Dept. of Labor & Industries. Use of this site is subject to the laws of the state of Washington.
https:Hsecure.lni.wa.gov/verify/Detail.aspx?UBI=601639846&LIC=IECS* * *044QL&SAW= 5/27/2016