Loading...
HomeMy WebLinkAboutPermit M16-0139 - AT&T - DUCTWORK AND DIFFUSERSAT&T 1010 SOUTHCENTER MALL M16-0139 City of Tukwila Department of Community Development « 6300 Southcenter Boulevard, Suite #100 Tukwila, Washington 98188 Phone: 206-431-3670 Inspection Request Line: 206-438-9350 Web site: http://www.TukwilaWA.Rov MECHANICAL PERMIT Parcel No: 9202470010 Permit Number: M16-0139 Address: 1010 SOUTHCENTER MALL Issue Date: 10/25/2016 WA Cities Electrical Code: 2014 Permit Expires On: 4/23/2017 Project Name: AT & T 2014 Owner: 2015 WA State Energy Code: Name: WESTFIELD PROPERTY TAX DEPT 2015 Address: PO BOX 130940, CARLSBAD, CA, 92013 Contact Person: Name: MARSIAL SEDA Phone: (562) 216-5244 Address: 111 W OCEAN BLVD, #1750, LONG BEACH, CA, 90802 Contractor: Name: C F M HEATING AND COOLING INC Phone: (425) 821-1293 Address: PO BOX 3205, KIRKLAND, WA, 98083 License No: CFMHEHC969CD Expiration Date: 2/4/2018 Lender: Name: Address: DESCRIPTION OF WORK: EXISTING (2) SPLIT SYSTEMS TO REMAIN, NEW DUCTWORK AND DIFFUSERS TO BE PROVIDED IN NEW CEILING. Valuation of Work: $5,000.00 Fees Collected: $258.96 Type of Work: REPLACEMENT Electrical Service Provided by: PUGEST SOUND ENERGY Fuel type: ELECT Water District: TUKWILA Sewer District: TUKWILA Current Codes adopted by the City of Tukwila: International Building Code Edition: 2015 National Electrical Code: 2014 International Residential Code Edition: 2015 WA Cities Electrical Code: 2014 International Mechanical Code Edition: 2015 WAC 296-46B: 2014 Uniform Plumbing Code Edition: 2015 WA State Energy Code: 2015 International Fuel Gas Code: 2015 Permit Center Authorized Signature: 1„�l�l_ X J� Jt-/ \ ""� Date: I hearby certify that I have read and examined this permit and know the same to be true and correct. All provisions of law and ordinances governing this work will be complied with, whether specified herein or not. The granting of this permit does not presume to give authority to violate or cancel the provisions of any other state or local laws regulating construction or the performance of work. I am authorized to sign and obtain this development permit and agree to the conditions attached to this permit. Signa Print tures(2z'i? /u'e' Date: Name: This permit shall become null and void if the work is not commenced within 180 days for the date of issuance, or if the work is suspended or abandoned for a period of 180 days from the last inspection. PERMIT CONDITIONS: 1: Work shall be installed in accordance with the approved construction documents, and any changes made during construction that are not in accordance with the approved construction documents shall be resubmitted for approval. 2: All permits, inspection record card and approved construction documents shall be kept at the site of work and shall be open to inspection by the Building Inspector until final inspection approval is granted. 3: All construction shall be done in conformance with the Washington State Building Code and the Washington State Energy Code. 4: Remove all demolition rubble and loose miscellaneous material from lot or parcel of ground, properly cap the sanitary sewer connections, and properly fill or otherwise protect all basements, cellars, septic tanks, wells, and other excavations. Final inspection approval will be determined by the building inspector based on satisfactory completion of this requirement. 5: All plumbing and gas piping work shall be inspected and approved under a separate permit issued by the City of Tukwila Building Department (206-431-3670). 6: All electrical work shall be inspected and approved under a separate permit issued by the City of Tukwila Permit Center. 7: VALIDITY OF PERMIT: The issuance or granting of a permit shall not be construed to be a permit for, or an approval of, any violation of any of the provisions of the building code or of any other ordinances of the City of Tukwila. Permits presuming to give authority to violate or cancel the provisions of the code or other ordinances of the City of Tukwila shall not be valid. The issuance of a permit based on construction documents and other data shall not prevent the Building Official from requiring the correction of errors in the construction documents and other data. 8: `MECHANICAL PERMIT CONDITIONS' 9: All mechanical work shall be inspected and approved under a separate permit issued by the City of Tukwila Permit Center (206/431-3670). 10: Manufacturers installation instructions shall be available on the job site at the time of inspection. PERMIT INSPECTIONS REQUIRED Permit Inspection Line: (206) 438-9350 0703 MECH EQUIP EFF 1800 MECHANICAL FINAL 0609 PIPE/DUCT INSULATION 0705 REFRIGERATION EQUIP 0701 ROUGH -IN MECHANICAL t CITY OF TUKWILA • Community Development Department Permit Center • 6300 Southcenter- Blvd., Suite 100 Tukwila, WA 98188 httn://www.TukwilaWA.gov Mechanical Permit No. Project No. Date Application Accepted: Date Application Expires: use MECHANICAL PERMIT APPLICATION Applications and plans must be complete in order to be accepted for plan review. Applications will not be accepted through the mail or by fax. "please print" SITE LOCATION + King Co Assessor's Tax No.: 9 202Li7"OO tO Site Address:_ b 10 ,,,46-, ce.,4er^ hAl 1 Suite Number: 316 Floor: I Tenant Name: A7 -&*7- New Tenant: p%.Yes ❑ ..No PROPERTY OWNER Name: Gf'a�ctw► Tc•- Go Address: City: CONTACT PERSON — person receiving all project communication Name: arS.a� Address: 1 `1 Orman vol- -417,Y-0 City:1 e, State: GA Zip:4708OZ Phone: S'62. 216, r2 Fax: Email: c71C.')e MECHANICAL CONTRACTOR INFORMATION Company Name: —li Address: City: State: Zip: Phone: Fax: Contr Reg No.: Exp Date: Tukwila Business License No.: Valuation of project (contractor's bid price): $ S (900 Describe the scope of work in detail: Existing (2) split systems to remain. New ductwork and diffusers to be provided in new ceiling. Use: Residential: New .......... ❑ Replacement ........ ❑ Commercial: New .......... Replacement ........ ❑ Fuel Type: Electric..... m Gas ....... ❑ Other:_ H:\Applications\Forrns-Applications On Line\2016 Applications\Mechanical Permit Application Revised 1.4-16.do" Revised: January 2016 Page 1 of 2 bh Indicate type of mechanical work being installed and the quantity below: Unit Type Qty Furnace <I OOk btu Residential, Nighttime Furnace >I OOk btu 13 Floor furnace 2 Suspended/wall/floor mounted heater 57 dB(A) Appliance vent Commercial Repair or addition to heat/refrig/cooling system 47 dB(A) Air handling unit <10,000 cfm 65 dB(A) Unit Type Qty Air handling unit >I0,000 cfm Residential, Nighttime Evaporator cooler 13 Ventilation fan connected to single duct 2 Ventilation system 57 dB(A) Hood and duct Commercial Incinerator — domestic 47 dB(A) Incinerator — comm/industrial 65 dB(A) Unit Type Qty Fire damper Residential, Nighttime Diffuser 13 Thermostat 2 Wood/gas stove 57 dB(A) Emergency enerator Commercial Other mechanical equipment 47 dB(A) 60 dB(A) 65 dB(A) Boiler/Compressor Qty 0-3 hp/100,000 btu 3-15 h /500,000 btu 15-30 hp/1,000,000 btu 30-50 hp/1,750,000 btu 50+ hp/1,750,000 btu Noise: Mechanical units need to be in compliance with the Tukwila Noise Code. Maximum permissible sound levels are based on from where the sound is created and where the sound is heard. Additionally, if sound can be heard from within a house at night in a residential zone it may not be allowed. For more details, see TMC 8.22 District of Sound Producing Source District of Receiving Property Residential, Daytime* Residential, Nighttime Commercial Industrial Residential 55 dB(A) 45 dB(A) 57 dB(A) 60 dB(A) Commercial 57 dB(A) 47 dB(A) 60 dB(A) 65 dB(A) Industrial 60 dB(A) 50 dB(A) 65 dB(A) 70 dB(A) *Daytime means 7AM-IOPM, Monday through Friday and 8AM-IOPM, Saturday, Sunday and State -recognized holidays. A few sounds are exempt from the noise code, including: Warning devices; Construction and property maintenance during the daytime hours (lam-IOpm); Testing of backup generators during the day. PERMIT APPLICATION NOTES - Value of construction — in all cases, a value of construction amount should be entered by the applicant. This figure will be reviewed and is subject to possible revision by the permit center to comply with current fee schedules. Expiration of plan review — applications for which no permit is issued within 180 days following the date of application shall expire by limitation. The building official may grant one extension of time for additional periods not to exceed 90 days each. The extension shall be requested in writing and justifiable cause demonstrated. Section 105.3.2 International Building Code (current edition). I HEREBY CERTIFY THAT I HAVE READ AND EXAMINED THIS APPLICATION AND KNOW THE SAME TO BE TRUE UNDER PENALTY OF PERJURY BY THE LAWS OF THE STATE OF WASHINGTON, AND I AM AUTHORIZED TO APPLY FOR THIS PERMIT. BUILDING O OR AUTHORIZED AGENT: Date: 01.0T ?o16 Print Name: �G c 2 Day Telephone: S-6 2 • 2-16. S� (4 U Mailing * 175D 13e& -In c -A 410 State Zip MApplicationsWorms-Applications On Line\2016 ApplicationsWechanical Permit Application Revised 14-16.docx Revised: January 2016 Page 2 of 2 bh DESCRIPTIONS PermitTRAK PAID $209.16 M16-0139 Address: 1010 SOUTHCENTER MALL Apn: 9202470010 $209.16 MECHANICAL $199.20 PERMIT ISSUANCE BASE FEE R000.322.100.00.00 0.00 $32.50 PERMIT FEE R000.322.100.00.00 0.00 $166.70 TECHNOLOGY FEE $9.96 TECHNOLOGY FEE TOTAL FEES 1 .. R000.322.900.04.00 0.00 $9.96 0. .16 Date Paid: Tuesday, October 25, 2016 Paid By: GARY WIRTA Pay Method: CREDIT CARD 715253 Printed: Tuesday, October 25, 2016 3:35 PM 1 of 1 OCR SYSTEMS DESCRIPTIONS PermitTRAK ACCOUNT QUANTITY PAID $929.11 D16-0249 Address: 344 SOUTHCENTER MALL Apn: 9202470010 $811.36 DEVELOPMENT $811.36 PLAN CHECK FEE R000.345.830.00.00 0.00 $811.36 EL16-0823 Address: Apn: $67.95 ELECTRICAL $67.95 PLAN CHECK FEE 8000.345.832.00.00 0.00 $67.95 M16-0139 Address: 344 SOUTHCENTER MALL Apn: 9202470010 $49.80 MECHANICAL $49.80 PLAN CHECK FEE TOTAL FEES PAIDR9363 R000.322.102.00.00 0.00 $49.80 $929.11 Date Paid: Thursday, September 08, 2016 Paid By: DP INC GENERAL CONTRACTORS Pay Method: CHECK 4053 Printed: Thursday, September 08, 2016 1:25 PM 1 of 1�� SY57EM5 INSPECTION RECORD Retain a copy with permit INSPECTION NO. PERMIT NO. CITY OF TUKWILA BUILDING DIVISION 6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431-3670 Permit Inspection Request Line (206) 438-9350 Project: Type of Inspection: Address: 1020 S IVIALL- Date Called: Special Instructions: Date Wante a.m. p.m. Requester. Phone No: I& Approved per applicable codes. El Corrections required prior to approval. MENTS: Date: r ah—P REINSPECTION FEE REQUIRED. Prior to next inspection, fee must be paid at 6300 Southcenter Blvd., Suite 100. Call to schedule reinspection. INSPECTION RECORD v Retain a copy with permit MI& -rel INSPECTION NO. PERMIT NO. CITY OF TUKWILA BUILDING DIVISION 6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431-3670 Permit Inspection Request Line (206) 438-9350 Project: T Type of Inspection: ECIJA.AL L /AML Address: Date Called: Special Instructions: Date Wanted m Requester: Phone No: F1Approved per applicable codes. Corrections required prior to approval. COMMENTS: Inspector: Date: / REINSPECTION FEE REQUIRED. Prior to next inspection, fee must be paid at 6300 Southcenter Blvd.. Suite 100. Call to schedule reinspection. INSPECTION RECORD A Retain a copy with permit% -6 13 q INS ON N0. PERMIT NO. CITY OF TUKWILA BUILDING DIVISION 6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431-3670 Permit Inspection Request Line (206) 438-9350 1-1 Approved per applicable codes. LJ Corrections required prior to approval. LJ paid at 6300 Southcenter Blvd., Suite 100. Call to schedule reinspection. INSPECTION RECORD Retain a copy with permit M I & -01 INSP ION N0. PERMIT NO. CITY OF TUKWILA BUILDING DIVISION 6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431-3670 Permit Inspection Request Line (206) 438-9350 Project: T It I Type of Inspection: MOCY CMUIP Address: le SA,1P4aVW Mau. Date Called: -1-0 Special Instructions: Date Wanted: a.m. 7 p.m. Requester: Phone No: Approved per applicable codes. Corrections required prior to approval. COMMENTS: Inspector: Date: REINSPECTION FEE REQUIRED. Prior to next inspection, fee must be paid at 6300 Southcenter Blvd., Suite 100. Call to schedule reinspection. INSPECTION RECORD ` Retain a copy with permit N ✓ 01 3q INSPECTION NO. PERMIT NO. CITY OF TUKWILA BUILDING DIVISION 6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431-3670 Permit Inspection Request Line (206) 438-9350 &Approved per applicable codes. L1 Corrections required prior to approval. Inspector: Date: A� REINSPECTION FEE REQUIRED. Prior to next inspection, fee must be paid at 6300 Southcenter Blvd.. Suite 100. Call to schedule reinspection. Un INSPECTION RECORD ` Retain a copy with permit Its -C11 INSPECTION NO. PERMIT NO. CITY OF TUKWILA BUILDING DIVISION 6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431-3670 Permit Inspection Request Line (206) 438-9350 Project: A T of Inspection: Address: to/® eco M4 1L Date Called: Special Instructions: Date Wanted: a. p.m. Requester: Phone No: RApproved per applicable codes. Corrections required prior to approval. Inspector: Date: It I Lt 6 E] REINSPECTION FEE REQUIRED. Prior to next inspection, fee must be paid at 6300 Southcenter Blvd.. Suite 100. Call to schedule reinspection. INSPECTION RECORD 1.3 Retain a copy with permit INSPECTION NO. PERMIT NO. CITY OF TUKWILA BUILDING DIVISION 6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431-3670 Permit Inspection Request Line (206) 438-9350 Project 7 A -r T eof Ins ection: Pe A V��T- A iyLAMIJ Address: Ole Oate Cal ed: Special Instructions: ate Want d: m / / /'7 p. rR—equestjfr: Phone No: xApproved per applicable codes. !l Corrections required prior to approval. U paid at 6300 Southcenter Blvd., Suite 100. Call to schedule reinspection. CFM HEATING & COOLING, INC. 11447 1201" Ave NE #200. Kirkland, Washington 98033 Phone: 425-821-1293 Fax: 425-821-1343 AIR OUTLET — TEST REPORT Project: H.V.A,C. System or Unit LOCatI0t1 nutlet Manufacturer• "`l 169-0 X3 9 AREA SERVED No. OUTLET TYPE SIZE DESIGN CFM PRELIMINARY CFM FINAL CFM k 2 3 z v �S1 3 Sso 4� . 4 S 3 v 5 3 3 � 6 10" �3 50 3S v 7 8 9 10 fD 3 as �3zv 12 2v 13 Li3 320 3 /5 .14 crV a� 16 17 18 19 20 21 18 19 CITY RECEIVE OF TUKWl c- 20 DE 0 5 2016 21 21 PERMIT CENTE 18 19 20 21 TEST DATE: 1144 READINGS BY: ���� PAGE _ OF City of Tukwila Department of Community Development September 13, 2016 MARSIAL SEDA 111 W OCEAN BLVD, #1750 LONG BEACH, CA 90802 RE: Correction Letter # 1 MECHANICAL Permit Application Number M16-0139 AT & T - 1010 SOUTHCENTER MALL Dear MARSIAL SEDA, Allan Ekberg, Mayor Jack Pace, Director This letter is to inform you of corrections that must be addressed before your development permit can be approved. All correction requests from each department must be addressed at the same time and reflected on your drawings. I have enclosed comments from the following departments: BUILDING - M DEPARTMENT: Allen Johannessen at 206-433-7163 if you have questions regarding these comments. (GENERAL NOTE) PLAN SUBMITTALS: (Min. size 11x17 to maximum size of 24x36; all sheets shall be the same size. New revised plan sheets shall be the same size sheets as those previously submitted.) (If applicable) "STAMP AND SIGNATURES" "Every page of a plan set must contain the seal/stamp, signature of the licensee(s) who prepared or who had direct supervision over the preparation of the work, and date of signature. Specifications that are prepared by or under the direct supervision of *a licensee shall contain the seal/stamp, signature of the licensee and the date of signature. If the "specifications" prepared by a licensee are a portion of a bound specification document that contains specifications other than that of an engineering or land surveying nature, the licensee need only seal/stamp that portion or portions of the documents for which the licensee is responsible." It shall not be required to have each page of "specifications" (calculations) to be stamped and signed; Front page only will be sufficient. (WAC 196-23-010 & 196-23-020) (BUILDING REVIEW NOTES) 1. Please provide on the plan a map of the mall specifying exactly where this tenant space is located. 2. Code notes shall reference compliance with current 2015 codes. 3. Depending on where this space is located in the mall, please verify if the ceiling is a shared plenum. If so, is it shall be required to take measures to provide return transfer air ducts to prevent exposure to the room with open ceiling. Note: This permit plan review may not be complete as revised plans may require further corrections Please address the comments above in an itemized format with applicable revised plans, specifications, and/or other documentation. The City requires that two 2 sets of revised plan pages, specifications and/or other documentation be resubmitted with the appropriate revision block. In order to better expedite your resubmittal, a'Revision Submittal Sheet' must accompany every resubmittal. I have enclosed one for your convenience. Corrections/revisions must be made in person and will not be accepted through the mail or by a messenger service. 6300 Southcenter Boulevard Suite #100 • Tukwila Washington 98188 • Phone 206-431-3670 • Fax 206-431-3665 L If you have any questions, I can be reached at 206-431-3655. Sincerely, Bill Rambo Permit Technician File No. M16-0139 6300 Southcenter Boulevard Suite #100 • Tukwila Washington 98188 • Phone 206-431-3670 • Fax 206-431-3665 PERMIT CQORD COPY: PLAN REVIEW/ROUTING SLIP PERMIT NUMBER: M16-0139 DATE: 10/12/16 PROJECT NAME: AT&T SITE ADDRESS: 1010 SOUTHCENTER MALL Original Plan Submittal Revision # before Permit Issued X Response to Correction Letter # 1 Revision # after Permit Issued DEPARTMENTS: AT Building Division Fire Prevention ❑ Public Works ❑ Structural ❑ PRELIMINARY REVIEW: Not Applicable ❑ (no approval/review required) REVIEWER'S INITIALS: APPROVALS OR CORRECTIONS: Approved ❑ Corrections Required ❑ (corrections entered in Reviews) Notation: REVIEWER'S INITIALS: Planning Division ❑ Permit Coordinator IN DATE: 10/13/16 Structural Review Required ❑ DATE: DUE DATE: 11/10/16 Approved with Conditions Denied ❑ (ie: Zoning Issues) DATE: Permit Center Use Only CORRECTION LETTER MAILED: Departments issued corrections: Bldg ❑ Fire ❑ Ping ❑ PW ❑ Staff Initials: 12/18/2013 PERMIT COOR® CORS. PLAN REVIEW/ROUTING SLIP PERMIT NUMBER: M16-0139 DATE: 09/08/16 1 PROJECT NAME: AT & T SITE ADDRESS: 1010 SOUTHCENTER MALL X Original Plan Submittal Response to Correction Letter #. DEPARTMENTS: Building Divisiohla, Public Works ❑ PRELIMINARY REVIEW: Not Applicable ❑ (no approval/review required) REVIEWER'S INITIALS: Revision # before Permit Issued Revision # after Permit Issued Fire Prevention Structural ❑ Planning Division ❑ Permit Coordinator ❑ DATE: 09/13/16 Structural Review Required ❑ DATE: APPROVALS OR CORRECTIONS: DUE DATE: 10/11/16 Approved ❑ Approved with Conditions ❑ Corrections Required Q— Denied ❑ (corrections entered in Reviews) (ie: Zoning Issues) Notation: REVIEWER'S INITIALS: DATE: Perrnit Center Use Only (� CORRECTION LETTER MAILED: —! "1�� Departments issued corrections: Bldg Fire ❑ Ping ❑ PW ❑ Staff Initials: —IkK 12118/2013 City of Tukwila Department of Community Development 6300 Southcenter Boulevard, Suite #100 Tukwila, Washington 98188 Phone: 206-431-3670 Fax: 206-431-3665 Web site: http://www.ci.tukwila.wa.us REVISION SUBMITTAL Revision submittals must be submitted in person at the Permit Center. Revisions will not be accepted through the mail, fax, etc. Date: /0/7bw Plan ChecWPermit Number: M16-0139 ❑ Response to Incomplete Letter # ® Response to Correction Letter # 1 RECEIVED CITY OF TUKWILA ❑ Revision # after Permit is Issued ❑ Revision requested by a City Building Inspector or Plans Examiner OCT 12 2016 Project Name: AT&T PERMIT CENTER Project Address: 1010 Southcenter Mall Contact Person: Y—Ar<, j k I se de, Phone Number: f2'02- SIV 6 2 "Y Summary of Revision: jo-k Later [AA -4 J Qt-� d &t f f9 2'0 3_ / �; li'•�� is ko f u vlu, K J alellua, Sheet Number(s): "Cloud" or highlight all areas of revision including date of revision Received at the City of Tukwila Permit Center by: � Entered in TRAKiT on \applications\forms-applications on line\revision submittal Created: 8-13-2004 Revised: C F M HEATING AND COOLING TNTC Home Fspaiiol Contact Safety & Health Claims & Insurance Aft Washington State Department of k,A labor & industries C F M HEATING AND COOLING INC Owner or tradesperson Principals CLANCY, SHAUN P, PRESIDENT Doing business as C F M HEATING AND COOLING INC WA UBI No. 602 361 244 License PO BOX 3205 KIRKLAND, WA 98083 425-821-1293 KING County Business type Corporation Page 1 of 2 !Search L&I �) A -L Index Ilelp My I:,&I Workplace Rights Trades & Licensing Verify the contractor's active registration / license / certification (depending on trade) and any past violations. Construction Contractor Active. ........................................................................ Meets current requirements. License specialties GENERAL $1,000,000.00 License no. CFMHEHC969CD Effective — expiration Effective date 02/04/2004— 02/04/2018 02/04/2011 Bond .............. . Expiration date DEVELOPERS SURETY & INDEM CO $12,000.00 Bond account no. 798903C Received by L&I Effective date 12/17/2008 02/04/2009 Expiration date Until Canceled Insurance ............................. AMERICAN FIRE & CASUALTY CO $1,000,000.00 Policy no. BKA54333410 Received by L&I Effective date 01/18/2016 02/04/2011 Expiration date 02/04/2017 Insurance history Savings ........_...._ No savings accounts during the previous 6 year period. Lawsuits against the bond or savings No lawsuits against the bond or savings accounts during the previous 6 year period. L&I Tax debts No L&I tax–debts are recorded for this contractor license during the previous 6 year period, but some debts may be recorded by other agencies. License Violations No license violations during the previous 6 year period. Help us improve https://secure,Ini.wa.gov/verify/Detail.aspx?UBI=602361244&LIC=CFMHEHC969CD&SAW= 10/25/2016 EXISTING CONDENSER UNIT SCHEDULE MARK MANUFACTURER MODEL # EER TOTAL COOLING SENS. COOLING HEATING VOLT/PHASE MCA MOCP WEIGHT SALES AREA CONDENSATE DRAIN SEEM RATE-: PEPRAIT 26 7.5 0.12 1674 CAPACITY CAPACITY CAPACITY 400 STOCK ROOMS GREENHECK 0 10 0.12 423 0 50.76 50.76 60 MINIMUM FRESH AIR CFM REQUIRED PER CODE 2. VIBRATION ISOLATION SUPPORT HANGERS 446.64 TOTAL O.A. 460 ZONE AIR DISTRIBUTION EFFECTIVENESS (TABLE 403.3.1.2) =0.8 = NOTES TOTAL O.A. PROVIDED ELECTRIC DUCT HEATER 580 RESTROOMS 70 CFM /FIXTURE #FIXTURES= 1 75 REQ'D CFM EXHAUST CFM EXHAUST 75 PROVIDED NOTES: REPRESENTS CONDITIONS DURING NORMAL OPERATIONS AND NOT CONSIDERING ECONOMIZER OPERATION. OMNI 24X24 SUPPLY GRILLE SEE PLAN - T.G.C. TO VERIFY ALL CU -1 YORK EF4D048 - - - - 208/1/60 33.1 40 EXIST GPM INFORMATION ON EXISTING TITUS OMNI 24X24 SUPPLY GRILLE SEE PLAN (OPEN CEILING) R1 HW I 18" LONG ORANGE MARKER TAPE ATTACHED BRANCH DUCT RECTANGULAR DUCT BREAK/CONTINUATION TITUS PAR 24x24 RETURN GRILLE UNITS PRIOR TO PERFORATED GRILLE LAVATORY DDUCT TRANSITION LL LANDLORD # x # DUCT DIMENSIONS - WIDTH x HEIGHT LAY-IN OR DUCT MTD. NOTE: 1. ALL GRILLES IN GYP BOARD CEILING SHALL BE ORDERED WITH BALANCING DAMPERS 2. PROVIDE HURRICANE TABS CU -2 CARRIER 38YC6048 - - - - 208/3/60 - 25 EXIST �Q CONSTRUCTION. OA OUTSIDE AIR CHECK VALVE RA RETURN AIR �Q 2 -WAY CONTROL VALVE RTU ROOF TOP UNIT ( 3 -WAY CONTROL VALVE -PROVIDE ALTERNATE BID SUPPLY AIR RN copy FOR REPLACING UNITS WITH EXISTING AIR HANDLER UNIT SCHEDULE NEW. MARK MANUFACTURER MODEL # CFM O/A H.P. HLT WEIGHT VOLT/PHASE MCA MOCP OI PIPE TURN UP T_STAT " THERMOSTAT of$pPr$� Field CQ$nd conditions I3 $CU2QVT0 n^ . CI PIPE TURN DOWN TYP EA O ❑ FLOOR DRAIN UH UNIT HEATER t--SS--j SANITARY SEWER LINE AHU-1 CARRIER FY4ANB042 1400 240 1/2 - EXIST 208/1/60 - 20 VENT LINE WC AHU-2 - FB4AN048 2000 340 - - EXIST 208/1/60 - 40 WH VENTILATION REQUIREMENT CALCULATION PER I MC TABLE 403.3 ROOM NAME UNITSERVICING PEOPLE CFM/PERSON CFM/SF AREA (SF) PEOPLE X CFM/PERSON SF X CFM/SF REQUIRED O.A. CFM PROVIDED O.A. CFM SALES AREA CONDENSATE DRAIN SEEM RATE-: PEPRAIT 26 7.5 0.12 1674 195 200.88 395.88 400 STOCK ROOMS GREENHECK 0 10 0.12 423 0 50.76 50.76 60 MINIMUM FRESH AIR CFM REQUIRED PER CODE 2. VIBRATION ISOLATION SUPPORT HANGERS 446.64 TOTAL O.A. 460 ZONE AIR DISTRIBUTION EFFECTIVENESS (TABLE 403.3.1.2) =0.8 = 575 TOTAL O.A. PROVIDED ELECTRIC DUCT HEATER 580 RESTROOMS 70 CFM /FIXTURE #FIXTURES= 1 75 REQ'D CFM EXHAUST CFM EXHAUST 75 PROVIDED NOTES: REPRESENTS CONDITIONS DURING NORMAL OPERATIONS AND NOT CONSIDERING ECONOMIZER OPERATION. L0,JECHANICAL NOTES 'I ALL WORK AND NIATET31AL SH&LL BE iN AGCOiC ANCE WITH LANDLORD'S TENANT DESIGN AND LECHNiCAL CRITERIA AND GENTER'S RUI:ES AND REGULATIONS. ALL CONTRACT(7r1S SHAD_ ORTAIf~ A COPY FROM LANDLORDS TENANT'Ct5 ,sRDINATOR On MALL FACILITES MANAGIZ SAND ACCOMC- FAMILIAR WITH THE R€QUiRrMENTS CONTAINED WITHIN PRIOR TO START OF JQB. WHCFIE LANDLORD'S REQUIREMENTS CONFL Cr ti"/ITFI CODES OR ORDINANCES, THE STRICTEST INTERPRE=TATION SHALL APPLY. 2.'; ERIFY ANY DEMOLITION WORK ANIS ANY NEW WORK REOUIRED BY THE LANDLORD THAT 3S NOT SHOWN (7N PLANSt WITH LANDLORD PRIOR TO 8-10, ,AND DEVICES. SPRINKLER PIPING DUCnVORK, PLU11 B NG, COWAU KATION SYSTEM WIRING, ETC_ DURING DEre OLIT ION AND PEW CONSTRUGTI(?N WITH LANDLORD AND TENANT ARCHITECT PRIOH TO 131D AND 5"TANT OF WORK 4.004.w 1AY 3E REQUIRED TO COVER REITURN AIR OPENINGS PROR TOS rART OF RS AND`(DR NEVj CONSTRUCTION. VERIFY V ITH L iNOLORDPROOR7t35TARTOF131DAVORK. 5.'+1HE.RE ARE 3 TYPES OF I4o1EGHANICAL SYST 4S IN TILE GELATE -R. EACH OF THE 3 SYSTEM TYPES AND THEIR UTILIZATION kVITHIH THE MALL ARE €0ENTIFif-D ON THE H00 ZONJING PLANS AS INDICATED IRI THE LANDLORO-S D17SIGN AND TECHNICAL CRITERIA. TYPE A - A CENTRAL SUPPLY SYSTEM Wi1ERE LANDLOPD SUPT^LIES CONDITIONED AIR TO EACH TENANT SPACE AND EXHAUSrAIFT TO EACIa TOIANT SPACE LOCATED WITHIN THE MALL, VIA THE LANDLORD SUPPLIED ROOFTOP IJf ffsAN40 EXHAUST FANs. TYPE 8 - A SPLIT SYSTEM DESIuri. LANDLORD SUPPLIES Ut3CONDiT1(],IEt3 OUTSIDE AIR AND EXHAUST AIR TO ALL TENA14'T SPACES LOCATED IN THIS ZONE ATEA THE LANDLORD PROVIDED SUPPLY FANS Ah;D EXITAUST FANS LOCATED ON THE ROOF �=r • I EMENI TY-1'EhIIiNT SUPPLIED H001"TOP UNITS r1Iv,D EXHAUST FANS '!Jf flrFit CHET.. JaaNT PROVIDES ALL ELL . � 1 S �� G A . �aC iw V i� A' S'F1 Iv C3F l"HE V ''.TF A! MECHANICAL INSTALLATION IS TO BE COUPLETED FUER ALL GOVERNING CODES AND ALL'tAtATERIALS � _N ITS SI1A<LBE NEW AND OF COMMERCIAL CRACA,AND DARE RGJNDERJRITrTSLAOEL(S), 9VFC C SUCH LAI.:Iha APPLIES. INSTALLATION SHALL BE PERFORIMED BY A LICENSED NIECHANICAL CONTRACTOR, IN A FIRS3-CLASS. W,O14KNAAN-LIKE MANNER. 7.TFN ANT ,HAL Pl y' I H.SK?9 t.[.TF DATA Ih_f1CA7.t.�s 5 SFF1 9 f-A t A �F_ t TH!:. DERA$F0 PRF 1hI5-)E$ AND A, CERTIFIED TIII JP RTYQ LA GFTCPORTCO Rf.URC TIId THIRTY t30) DAYS AFTER GPrhlfG, T}LTEhAAT SHA LL PERFORM BALANCING OF TALL DUCT SYSTEI'S BELATED TO ?HF. PREMISES BY USE OF A LANDLORD APPROVED, INDEPENDENT AIR BALANCE CONTRACTOR NOT AFFILIATED >,;t'iTH TENANT "S MECHANICAL CONTRACTOR, 8ALANGING MUST BE COMPLETED AND AN AIR BALANCE REPOCIT MUST BE SUBMITTED TO AND ACCEPTED BY LANDLORD PRIOR TO T,14E STORE OPENiNG FOR BUSINESS: REPORT SMALL APPLY TO ALL HVAC EQUIPMENT, INCLUDING VAV BOX AIRFLOW SENSOR DIFF11REUTIALPRESSURE READINGS AT MAXiflfUM AND hIII'Ji`rlUM COOLING tFO 'TENANTS IN AREA Ah AND TOILET T EXHAUST HEADINGS t A rT.THE ROOFtiVlwR'r}#E: A9AJCjF11TY Cf THF MALL EL COMPOSED (3i= MG rAL t7ECtEr:G WITH FOAM [INSULATION, irk' 017NSOC-C€c AHD a PLY ASPHALT R00r FELTS; SI GE IT LiNr's OF FOMPI/CHIT NEED TO RG OONSIDFAE7D VJIIFN LOCATING UEPNIENT ON THE ROOF f IAN; ROOF. ACCESS TO THE MALL ROOF IS RE=STRICTE'D TO LANDLORD h r� ECt E:�13;.N1' CONTRACTOR ORQN RACTORSCNLY 1� }1O T PERSONNEL AND LANDLORDS DESIGNATED T C T SUB -CONTRACTOR SHALL BE PERMITTED 0,N THE ROOF UNLESS PEAMISSION HAS BEEN OBTAiNEID FROII TENANT COORDINATOR OR FACILITIES MA1dACiER. 8.T}w BUILDING'S STEEL STRUCTURE IS COVERED iIT€f RE PROOFING SPRAY 4"THICK ON BEAMS AND THICK OtN COLUMNS. ALL STEEL SLIPP tar ITS nEOUIRED BY TENANT TO BE ATTACHED TO THE STEEL STRUCTUR€ SHILL BE CL1F'r EO, NOTWEeLDEV. TENANT SHALL RETURN ALL FIRE PROOFING WITHIN THE PSEMISES TO THE SPECIFIED THICVNESS, l tO.AiIR HANDLING UNITS, VEATNG COUIPMENT, WATER HEATERS AND LITIIC � EQt}<hF iC}7? LOC�+TED LrJ1TE31E1 T4EE DEMISEDPREMISES ISES SLIAI_L BE FLOG ,MOUN ITED OR LOCATED OVER THE TOILET OR STORAGE AREAS ON SUPPORTS PROVIDED BY TENANT, NOT TO EXCEED € AXIMUM LIME LOAD. EXHAUST FAN SCHEDULE MARK SYMBOL MANUFACTURER CATALOG NUMBER LOCATION CFM HP VOLT FAN RPM NOTE SIDEWALL SUPPLY GRILLE AS SPECIFIED CD CONDENSATE DRAIN SEEM RATE-: PEPRAIT -Ar--)FLOW ARROW SQUARE PLAQUE S1® REQUIRED FOR: FOR: DESIRED, TENANT ;SHALL CONTACT L.ANIQLORD`S TENANT COORDINATOR TO REVIEW THE SERVICE CONNECTION TURNING VANES EF -1 ® GREENHECK SP -B110 CEILING 75 1/4 120 1000 1 1. BACKDRAFT DAMPER DRINKING FOUNTAIN 2. VIBRATION ISOLATION SUPPORT HANGERS GYP.BD. CEILING 3. ROOF CURB DIA 4. ADJUSTABLE T -STAT SET AT 85- F (IN PLENUM AND ACCESSIBLE FROM BELOW) 5. BIRD SCREEN EDH AIR DEVICE SCHEDULE MARK SYMBOL MANUFACTURER CATALOG NUMBER FIXTURE DESCRIPTION NECK SIZE REMARKS AHU AIR HANDLER UNIT �- SIDEWALL SUPPLY GRILLE AS SPECIFIED CD CONDENSATE DRAIN SEEM RATE-: PEPRAIT -Ar--)FLOW ARROW SQUARE PLAQUE S1® REQUIRED FOR: FOR: DESIRED, TENANT ;SHALL CONTACT L.ANIQLORD`S TENANT COORDINATOR TO REVIEW THE SERVICE CONNECTION TURNING VANES TITUS OMNI 24x24 SUPPLY GRILLE SEE PLAN EXHAUST DUCT THROUGH ROOF CW COLD WATER Plumbing as ftim VOLUME DAMPER DF DRINKING FOUNTAIN City of Tukwila GYP.BD. CEILING MOTORIZED DAMPER DIA NG DIVISION DIAMETER t -J FD FIRE DAMPER EDH ELECTRIC DUCT HEATER O SQUARE PLAQUE S2® EXHAUST FAN �•- ELECTRIC DUCT HEATER TITUS OMNI 24X24 SUPPLY GRILLE SEE PLAN LAY -IN (ACOUSTIC CEILING) FLOOR CLEAN OUT O DUCT MOUNTED SMOKE DETECTOR FD FLOOR DRAIN row ® REMOTE ALARM FOR DUCT DETECTOR ACTIVATION FLA DUCT MOUNTED S3® EXHAUST FAN GPM w1tnOt;t nripr approval - IDON* GALLONS / MINUTE TUk1VI!a Buil Pn of r T TITUS OMNI 24X24 SUPPLY GRILLE SEE PLAN (OPEN CEILING) R1 HW I 18" LONG ORANGE MARKER TAPE ATTACHED BRANCH DUCT RECTANGULAR DUCT BREAK/CONTINUATION TITUS PAR 24x24 RETURN GRILLE SEE PLAN PERFORATED GRILLE LAVATORY DDUCT TRANSITION LL LANDLORD # x # DUCT DIMENSIONS - WIDTH x HEIGHT LAY-IN OR DUCT MTD. NOTE: 1. ALL GRILLES IN GYP BOARD CEILING SHALL BE ORDERED WITH BALANCING DAMPERS 2. PROVIDE HURRICANE TABS 1 i .NOISE rA ND V113RATION THAT MAY BE CAUSED BY THE OPERATION OF ANY HVAC EQUIPMENT MUST BE CONTROLLED I'TH VIE3RAI-1014 ISOLATORS, RESILIENT MOUNTING DETAILS, FLEXIBLE DUCT CO ENECTIrr NS, DUCT LININGS AND OTHER MEASURES THAT MAY BE REQUIRED. EQUIPMENT THAT iS MOUNTED TO THE BANE E3UiLDING STRUCTURE MUST RE INSTALLED SO THAT NO NOTICEABLE VIBRATION IS TRANSFERRED TO THE BASE BUILDING, STRUCTURE. TENANT IS RESPONSIBLE FOR ISOLATION OF ALL EQUIPf-AENT s0 THAT VI RATIONS AND NOiSES ARE NOT TRANSMITTED. ANY NOISES DEEMED OBJECTIONABLE BY LANDLORD'S SfTE ITEPRESENTATIVE SHALL BE CORRECTED AT TENANT -S EXPENSE. I Z HVAC SYSTEM SHALL BE iN OPERATION WHENEVER LANDLORD PROVIDED HVAC SERVICES ARE OPERATING. TENANTS ARE RECIVIRED TO INSTALL A ,SEVE;OAY TIME CLOCK CIOC FOR CONTROLLING TIC€ HVAC SY T.'.-, h_r'I AN D BI _ CONNECTED TO THE :-IRE,/SMOKE ALARM SYSTEM. 13.TENANT'S AIR-CONDITIONING SYSTEN4 SHALL DE PROVIDED WITH ALL NECESSARY CONTROLS AND DEVICES AND BE =41PATIBLE WITH THE ENCLOSED SHOPPING CENTER AIR-CCiNDITIONINd SYSTEM AND FIRE ALARM S YST EM - t LCyk f VC)LTAGC CONTROLSSHALL BE IN CONDUIT: 14.TENANTS THAT HAVE ODOR -PRODUCING OPERATIONS SHALL INSTALL A FORCED DRAFT VENTILATION SYSTEM 'TO MAINTAIN A NEGATIVE tPI ESSURE 1VI"I'HIN THE TENANT SPACE AND DISCHARGE INTO THE ATMOSPHERE VIA THE ROOF AREA. 7ENr*T }S RrS I LE FOR PROPER DIFFUSI Nl�� Tl:E EXIAUSTIA SUCH A ANhE AS TO PRFVENT ODORS FROM ENTERING AIR INTAKE`; OF OTHER VENTILATION SYSTEMS. 15.00cDLNSAT E LC•ES FOR REFRIGERATION ANDCR AIR•COvDITICINftG SHALL BE COPPER PIPES.. SUCH PIPE SHALL TERMINATE BACK INTO TENANT'S SPACE AND BE CONNECTED ABOVE THE P=TRAP OF THE SINK IN ACGC)Fii7At^ICE WITH THE E1EQU€IEt,+}Et4TS C7I= LOCAL AUTI10RI74ES AND LANDLORD.- OR TENANT SHALL INSTALL (IN ACCORDANCE 1rJIT1-I ALL GOVERN}N><s. C013E5) ANY CCaNiilNSATE 'DRAINS FROM AIR -HANDLING, L114iT5 TO LANDLORD'S &hCLCRD� SEWER } NE _ IB.TF_NAC3T ISNOT PEAMi ED TO USE A WATEEII-COQLINO TOWER. On ANY EVAPOA IVE COOLING APP ARATUS. 17 AE DISTRIBUTION DEVICES SHALL BE CEILING OR SIDE WA LL MOUNT ED REGISTERS OR DIFFUSERS INSTALLED AS REQUIRED TO"ACHIEVE DRAFT -FREE AIR DIST RIEUFtON IN ACCORDANCE WITH GOOD ENGINEERING PRACTICES, A MANUAL VOLUME 'DAMPER SHALL RE INSTALLED UP5TREMA jM11'}IMUM 3 FEET) OF REGRISTERS OR DIFFUSERS IN ALL SALES AREAS. T3HAN'CER-1l�=S,iUC�-SaiAFS, FASTENING ,DEVICES. ET..SMALL 8_ FASTENED TO JOISTS PD;0R 3EAr9 S ABOVE AND CONFORM TO THE MECHANICAL CODE OF THE STATE OF CALIFORNIA. >D0 NOT ATTACH ANYTHING 0 Pi NI I} 1 SUPPORT BUILDING Y T I-I-PPFt;-L "`L A H ROOF F K AND FUR I -I E 9 �I C SUP PII313 L: G t)E. IOIRI=OTt, C� T I� LI ��It"�I. R OR E O f ! � 8 t� T E CODE. I13_TENANT; AT TENAN-1 S EXPENSE, SHALL ENCLOSE ANY REQUIRED DUCT SHAFT'S LOCATED OUTSIDE THE TENANTS SPACE WITH A Tt^+O- (2) HOUR ItiFiE-FiATCD PARTITION. LANDLORD SHALL APPROVEAND DESIGNATE THE LCCATiONS OF ANY TENANT-REQVIfiED DUCT SHAFT LOCATE[) OUTSIDE THE OEMII`ED PREWSESr 20,HVAC DUCT -TYPE SMOKE DETECTOR; SHALL BE INSTALLED AS REQUIRED BY CODE IN EVERY HEATING AND COOLING SY STEP.# UPSTREAM OF ANY OUTSIDE AIR INTAKE, FILTERS, OR DECONTAMINATION EQUIPMENT, WHICH, I.3F'ON ACTIVATION WILL AUTOr. ATiCALLiY SHLI►THE SYSTEM DOWN (PER APPLICABLE CODES , 21.ALL EQUIPMENT ON ROOF SHALL BE LABELED WITH WE,ATHr-RPRoor- ;IGNAGE INDICATING TENANT NAME AND SPACE NUnASER, 23.THE TENANT IS RESPONSIBLE FOR PROVIDING THEIR OWN GREASE EmAUST UNITS S) AND ALL NECESSARY DUCT WORK IN ACCORDANCE WIT -I THI< GUFIRENT Nr PA =E36, CALIFORNIA BUILDING CODI=, AND ALL LOCAL JURISDICT11ONS HAVING AU1`HORTrY_ 2 FLANGED AND GASKETED JOINT OR DUCT CONNECTION AND RE- INFORCEMENT IN ACCORDANCE WITH SMACNA 2" W.G. CLASS, SEAL NON-GASKE ED TRANS- VERSE JOINTS IN ACCORDANCE WITH SMACNA CLASS "C" (TYP.) MECHANICAL SYMBOLS LEGEND ABBREVIATIONS ® SUPPLY GRILLE AS SPECIFIED A.F.F. ABOVE FINISHED FLOOR 2" WIDE MIN. DUCT STRAP 48" O.C. MAX. RETURN GRILLE AS SPECIFIED AHU AIR HANDLER UNIT �- SIDEWALL SUPPLY GRILLE AS SPECIFIED CD CONDENSATE DRAIN SEEM RATE-: PEPRAIT -Ar--)FLOW ARROW CFM AIR VOLUME - CUBIC FEET/ MiNUTE REQUIRED FOR: FOR: DESIRED, TENANT ;SHALL CONTACT L.ANIQLORD`S TENANT COORDINATOR TO REVIEW THE SERVICE CONNECTION TURNING VANES CU CONDENSING UNIT.@ Li dr ElecWcal I OQATIQN AND PIPE ROUTING REQUIREMENTS ENTS SEFORE� BEQINNINO DESIGN Wt)13K. 25 -FLOOR PLAN AND,10R REFLECTED CEILING PLANT MUST 88 AT F�1INII1.RE, M CINE-81GHT SCALE S/$ SCALE OR' ( np EXHAUST DUCT THROUGH ROOF CW COLD WATER Plumbing as ftim VOLUME DAMPER DF DRINKING FOUNTAIN City of Tukwila J MD MOTORIZED DAMPER DIA NG DIVISION DIAMETER t -J FD FIRE DAMPER EDH ELECTRIC DUCT HEATER O THERMOSTAT EF EXHAUST FAN �•- ELECTRIC DUCT HEATER ESP EXTERNAL STATIC PRESSURE T_ PUMP FCO FLOOR CLEAN OUT O DUCT MOUNTED SMOKE DETECTOR FD FLOOR DRAIN row ® REMOTE ALARM FOR DUCT DETECTOR ACTIVATION FLA FULL LOAD AMPSNO changes ShS ®"fort EXHAUST FAN GPM w1tnOt;t nripr approval - IDON* GALLONS / MINUTE TUk1VI!a Buil Pn of r T © REMOTE TEMPERATURE SENSOR HP Vjill require a nmv Plan submittal HORSEPOWER and may Include additional plan raviAlAt h%.. HOT WATER /a MOTOR HW I 18" LONG ORANGE MARKER TAPE ATTACHED BRANCH DUCT RECTANGULAR DUCT BREAK/CONTINUATION IWH INSTANTANEOUS WATER HEATER ROUND DUCT BREAK/CONTINUATION LAV LAVATORY DDUCT TRANSITION LL LANDLORD # x # DUCT DIMENSIONS - WIDTH x HEIGHT MCA MINIMUM CIRCUITAMPACiTY lu�-CFM GRILLE TYPE } SUPPLY/RETURN GRILLE TAG MD MOTORIZED DAMPER MOCP MAXIMUM OVERCURRENT PROTECTION PLUMBING SYMBOLS LEGEND N.I.C. NOT IN CONTRACT pQ BALL VALVE NTS NOT TO SCALE �Q GATE VALVE OA OUTSIDE AIR CHECK VALVE RA RETURN AIR �Q 2 -WAY CONTROL VALVE RTU ROOF TOP UNIT ( 3 -WAY CONTROL VALVE SA SUPPLY AIR RN copy I PIPE UNION SS SANITARY SEWER Permit ft, _6--aal 0- DIRECTION OF FLOW ARROW TEN TENANT Plan MV16w approval IsSubject to errors and Oa•r • Ons [ END CAP T.G.C. APPrOval Q C0 ns r ( LIC` X10 nd documents does TENANT GENERAL COh}F&CT R . not $Ilt�l01Z4 11 Y10 �$ tion of any afted Mdn or ordinanGe. r OI PIPE TURN UP T_STAT " THERMOSTAT of$pPr$� Field CQ$nd conditions I3 $CU2QVT0 n^ . CI PIPE TURN DOWN TYP TYPICAL BY., O ❑ FLOOR DRAIN UH UNIT HEATER t--SS--j SANITARY SEWER LINE U.N.O. UNLESS NOTED OTHERWISE MIMING Z -- WATE COLD R LINE VD VOLUME DAMPER ---I HOT WATER LINE V.I.F. VERIFY IN FIELD ----- r VENT LINE WC WATER CLOSET 1-<EVIEVVED FOR CODE COMPLIANCE t -G -t GAS LINE WCO WALL CLEAN OUT PFIKOVED O TANK TYPE WATER HEATER WH TANK TYPE WATER HEATER 't All NOTE: NOT ALL SYMBOLS OR ABBREVIATIONS MAY APPEAR ON PLANS. CRY of Tukwila BUILDING IDIVISI ISSUE DATE 09/22/16 A PLAN CHECK 09/28/16 LL COMMENTS C3 t(o cm r` .2 es v)a. XN T d`* TOP O ~ T CLC)a;rN mco agi >cun LQOco Lo m � �i''� �cnC9o.0 ami 0) C fU in C O U 0 C C (D CL C O 30 J J IREI.r t IO 23 -ALL ROOFTOP EQUIPMENT LOCATIONS MUST HAVE PRIOR WRITTN APPROVAL FROM THE LANDLORD. ALL 2" WIDE MIN. DUCT STRAP 48" O.C. MAX. 00 AIR ROOF�MOILJNTED KITCHEN EXHAUST FANS THATHANDLE A GREASE DISCHARGE. SHALL HAVE A GREASE CATCH PAN AND GLITTER. 00 MAIN DUCT FLOW 21.NATURAL GAS SERVICE IS AVAILABLE FOR FOOD.COURT AND RESTAURANT TENANTS ONLY. IF GPS SERVICE IS w W z DESIRED, TENANT ;SHALL CONTACT L.ANIQLORD`S TENANT COORDINATOR TO REVIEW THE SERVICE CONNECTION WI RIGID ROUND METAL ED EXTERNALLY INSULATED LI ACOUSTICAL LINING �\ I OQATIQN AND PIPE ROUTING REQUIREMENTS ENTS SEFORE� BEQINNINO DESIGN Wt)13K. 25 -FLOOR PLAN AND,10R REFLECTED CEILING PLANT MUST 88 AT F�1INII1.RE, M CINE-81GHT SCALE S/$ SCALE OR' ( np Z W U = W W i)UI- .1 r _________________________T______________r---------------------- LAISGEFL AND SHALL INCLUDE ALL DUCTWORIIC. EXHAUST SYsTEms, HOODS. PIPING AN F_OUIPM =NT Q RIGID ROUND DUCT ELBO Q I 26.SCHEMATIC DIAGRAM OF THE HVAC SYSTEM CONTROLS, INCLUDING ALL FIREISM6KE DETECTION AND ALARI•.A: Q EXTERNALLY INSULATED r -- 45 DEVICES WITH ALL MANUFACTURES'MODEL NUMBERS MUST BE INDICATED., C) 27..DRAWINGS MUST CONTAIN EQUIPMENT SCHEDULES, iNCLUDINC AIR -HANDLING UNITS, CONDENSING UNITS, T_ ALL DUCT LINER TRANSVERSE i ROOF UNITS, EXHAUST FANS, AIR DEVICES (DIFFUSERS, REGISTERS AND GRILLES) AND ANY OTHER EQUIPMENT INSULATED FLEXIBLE DUCT MAX. LENGTH � EDGES TO BE COATED WITH VOLUME DAMPER LOCATION WHERE ABOVE i I LAY -IN CEILING. PROVIDE WITH LOCKING ADHESIVE IN ACCORDANCE I t s USED, INCLUDING MANUFACTURERS' NAME AND NUMBER. 28.Ti^NANT SPACE BELOW. VERIFY APPROVED PENETRATION I.00I�TIe}�CS AND FOLLOWING LAN[}Lt�RIO METAL SUPPLY DUCT EXTERNALLY INSULATED WiTH SMACNA STANDARDS I ---- I QUADRANT (TYP.) ---- t REQUIREMENTS WITH LANDLORD ANIS TENANT'S ARCHITECT- - RADARISGRAFVX-RAY TESTING, FIREPROOFING AND -SEALING, ETC, MAY BE REQUIRED TO /ISS LANQWRD'.S OR LANDLORD APPROVED CONTRACTORS. ALL =RK SHALL RECEIVED Tit OF TUKWILA VOLUME DAMPER (FOR I BE AT TENANT'S EXPENSE. ALL PROPOSED, LOCATIONS AND,'OR PENETRATIONS SMALL MATCH LOCATIONS AS FINAL BALANCEI I 18" LONG ORANGE MARKER TAPE ATTACHED BRANCH DUCT INDICATED ON'THE LANDLORD -APPROVED PLANS AND RE APPROVED AY LANDLofto`S STN -,SITS RF_P IF_ F_NTATIV OCT 12 2016 ADJUSTMENT) i I TO DAMPER TO IDENTIFY LOCATION 23.VERIFY LANDLORD APPROVEDMETHODS FOR ATTACHING TO BUILbiNc- S°TRUCT11FIE WHEN 4AANGING.!SUI POFITING. HVAC EQUIPMENT, DUCTIV(ORK PIPING. WATER HEATERS, TRANSF ORIVIEF1S, FIXTUnEs. DIFFUSER TRIM FRAM DIFFUSER CEILING CONDUIT, ETC. WITH LANDLORD AND TENANT'S ARCHITECT, ATTAaCI ING TO UPPER LEVEL FLOOR SLAB OR ROOF. ERMIT CENTER DECK IS NOT ALLOWED, GONDUIT HANGERS, CLAMPS, EIGHT FIXTURE SUPPORTS, ETC. SHALL K FASTENED TO BAR JOISTS OR BEAMS. CONNECTIONCTAKE-OFF DETAIL ICONTINiJED ON NEXT PAGE) , SCALE: NTS SCALE: NTS ME am M wm -is Mon ISSUE DATE 09/22/16 A PLAN CHECK 09/28/16 LL COMMENTS C3 t(o cm r` .2 es v)a. XN T d`* TOP O ~ T CLC)a;rN mco agi >cun LQOco Lo m � �i''� �cnC9o.0 ami 0) C fU in C O U 0 C C (D CL C O 30 These drawings/spectfications are the property of Kamus + Keller. They are fumished as contract documents only. The seal(s) and signature(s) appy only to the documents to which they affixed, and expressly displaim any responsibility for alt other plans, specifications, estimates, reports or other documents or instruments relating to or intended to be used for any part or parts of the architectural or engineering project. Additionally these drawings and seal(s) shall in no way convey or imply any time of warranty or certification retaUng to the performance of products and materials beyond those provided by their respective manufacturer. PROJECT NO. 16.0430.01 DRAWN/REVIEWED GF1BB DATE/iSSUE 09.07.2016 SHEET TITLE ECH SCHEDULE LEGEND & DETAILS SHEET NO. TVI 1 .O T_ N J J W.i J < 00 OQ c C 00 �y 1.l. W w W z Q WI -W�: J Q Z W U = W W i)UI- .1 I- O Q 06 Q (nW rn E✓J Q w r -- C) T_ These drawings/spectfications are the property of Kamus + Keller. They are fumished as contract documents only. The seal(s) and signature(s) appy only to the documents to which they affixed, and expressly displaim any responsibility for alt other plans, specifications, estimates, reports or other documents or instruments relating to or intended to be used for any part or parts of the architectural or engineering project. Additionally these drawings and seal(s) shall in no way convey or imply any time of warranty or certification retaUng to the performance of products and materials beyond those provided by their respective manufacturer. PROJECT NO. 16.0430.01 DRAWN/REVIEWED GF1BB DATE/iSSUE 09.07.2016 SHEET TITLE ECH SCHEDULE LEGEND & DETAILS SHEET NO. TVI 1 .O T_ N DIVISION 15010 - GENERAL REQUIREMENTS 1.0 GENERAL 1_1 SPECIFICATIONS ARE APPLICABLE TO ALL CONTRACTORS AND/OR SUBCONTRACTORS FOR MECHANICAL SYSTEMS. DIVISION 15050 - BASIC MATERIALS AND METHODS 1.0 GENERAL 1_1 PROVIDE ALL MATERIALS, LABOR, EQUIPMENT, AND ACCESSORIES REQUIRED TO FURNISH AND INSTALL THE MECHANICAL ITEMS IDENTIFIED IN THIS SECTION. 1_2 CHECK OTHER PLANS AND SPECIFICATIONS AND FULLY COORDINATE WITH OTHER TRADES, OWNER 1.2 AND ARCHITECT REQUIREMENTS. 1_3 CONFORM TO ALL GENERAL AND SPECIAL CONDITIONS OF CONTRACTS SPECIFIED BY ARCHITECT AND/OR OWNER. 1_4 VISIT SITE, CHECK FACILITIES AND CONDITIONS AND MAKE ALL NECESSARY OBSERVATIONS AND MEASUREMENTS. NOTE CONDITIONS UNDER WHICH WORK IS TO BE PERFORMED AND TAKE ALL ITEMS INTO CONSIDERATION IN BID. 1_5 SYSTEMS ARE TO BE COMPLETE AND WORKABLE IN ALL RESPECTS, PLACED IN OPERATION AND PROPERLY ADJUSTED. 1_6 EACH CONTRACTOR SHALL PROVIDE FOR HIS OWN CLEAN UP, REMOVAL AND LEGAL DISPOSAL OF ALL RUBBISH DAILY. 1_7 CONTRACTOR SHALL PROTECT HIS WORK, THE EXISTING AND ADJACENT PROPERTY AGAINST WEATHER. 1_8 CONTRACTOR SHALL PROTECT HIS WORK, MATERIALS, APPARATUS AND FIXTURES FROM DAMAGE. ANY WORK DAMAGED BY FAILURE TO PROVIDE PROTECTION REQUIRED, SHALL BE REMOVED AND RELEASED WITH NEW MATERIAL AT THE CONTRACTORS EXPENSE. 1.9 CONTRACTOR MUST CONFIRM ALL UTILITY COMPANY REQUIREMENTS AND CONNECTIONS POINTS IN FIELD PRIOR TO STARTING WORK. 1.10 ARRANGE FOR AND OBTAIN OWNER'S AND INSURANCE REPRESENTATIVE'S PERMISSION FOR ANY SERVICE SHUTDOWNS. 1.11 THE CONTRACTOR SHALL BE SOLELY RESPONSIBLE FOR CONSTRUCTION MEANS, METHODS, SEQUENCES OF CONSTRUCTION AND THE SAFETY OF WORKMEN. 1.12 NO PIPING, DUCTWORK, WIRING, ETC. SHALL BE INSTALLED OR ROUTED ABOVE ELECTRICAL PANELS AND EQUIPMENT OR THROUGH ELEVATOR EQUIPMENT ROOMS. 1.13 THE MECHANICAL CONTRACTOR SHALL COORDINATE WITH THE ELECTRICAL CONTRACTOR AND OBTAIN A WRITTEN APPROVAL IDENTIFYING THE ELECTRICAL CHARACTERISTICS OF ALL MECHANICAL EQUIPMENT PRIOR TO ORDERING OF EQUIPMENT. NO ADDITIONAL PAYMENT WILL BE MADE FOR LACK OF CONTRACTOR COORDINATION OF ELECTRICAL CHARACTERISTICS. 1.14 DURING CONSTRUCTION THE CONTRACTOR MAY UNCOVER AN EXISTING CONDITION THAT WILL HAVE TO BE MODIFIED. ANY SUCH WORK WHICH COMES UNDER THE JURISDICTION OF THIS CONTRACTOR SHALL BE DONE BY THE CONTRACTOR WITHOUT EXTRA COST TO THE OWNER, AS THOUGH FULLY DETAILED PLANS AND/OR DESCRIBED IN THE SPECIFICATIONS. 1.15 WORK RELATED TO THE EXISTING BUILDING SHALL BE COORDINATED TO MINIMIZE INTERFERENCE OR INTERRUPTION OF NORMAL BUILDING USE BY OWNER. REFER TO ARCHITECTURAL PLANS FOR PHASING REQUIREMENTS. 2.0 CODES PERMITS STANDARDS AND REGULATIONS 2.1 CONFORM TO APPLICABLE CODES (LOCAL, STATE, NATIONAL CODES, NFPA, OSHA, ETC.) GOVERNMENT REGULATIONS, UTILITY COMPANY REQUIREMENTS, AND APPLICABLE STANDARDS. 2_2 OBTAIN PERMITS AND PAY ALL FEES. ARRANGE FOR ALL REQUIRED INSPECTIONS AND APPROVALS. 3.0 DRAWINGS 3_1 THE SYSTEMS AS SHOWN ON MECHANICAL DRAWINGS ARE DIAGRAMMATIC, CONFORM TO ALL DIMENSIONS BY FIELD MEASUREMENTS 3_2 THE EXACT LOCATIONS FOR FIXTURES, EQUIPMENT AND PIPING WHICH IS NOT COVERED IN BY DRAWINGS. SHALL BE OBTAINED FROM THE ARCHITECT OR HIS REPRESENTATIVE IN THE FIELD AND THE WORK SHALL BE LAID OUT ACCORDINGLY. 3_3 DRAWINGS AND SPECIFICATIONS ARE INTENDED TO SUPPLEMENT ONE ANOTHER. ANY MATERIALS OR LABOR CALLED FOR IN ONE BUT NOT THE OTHER SHALL BE FURNISHED AS IF BOTH WERE MENTIONED IN THE SPECIFICATIONS AND SHOWN ON THE DRAWINGS. 4.0 BASE EQUIPMENT MATERIALS AND SUBSTITUTIONS 4_1 ALL EQUIPMENT AND MATERIALS SHALL BE NEW, FREE OF DEFECTS AND U.L. LABELED. 4_2 BASE BID MANUFACTURERS ARE INCLUDED IN THE SPECIFICATIONS OR LISTED IN SCHEDULES ON THE DRAWINGS. ALL OTHER MANUFACTURERS ARE CONSIDERED A SUBSTITUTION. 4_3 THE NAME OR MAKE OF ANY ARTICLE, DEVICE, MATERIAL, FORM OF CONSTRUCTION, FIXTURE, ETC., STATED IN THIS SPECIFICATION, WHETHER OR NOT THE WORDS "OR APPROVED EQUAL" ARE USED, SHALL BE KNOW AS "STANDARD." 4_4 ALL PROPOSALS SHALL BE BASED ON "STANDARDS" SPECIFIED. 4_5 THE EQUIPMENT SCHEDULES ON THE DRAWINGS INDICATE MANUFACTURERS EQUIPMENT MODEL NUMBERS THAT THIS DESIGN HAS BEEN BASED ON. THE USE OF OTHER MANUFACTURERS EQUIPMENT THAT IS LISTED AS ACCEPTABLE ALTERNATES THAT ENTAILS GENERAL TRADES, STRUCTURAL, MECHANICAL, ELECTRICAL, ETC. REVISIONS ARE THE CONTRACTOR'S RESPONSIBILITY. ANY ADDITIONAL COST OF SUCH CHANGES SHALL BE PAID BY THE CONTRACTOR SUBMITTING THE ACCEPTABLE ALTERNATES WHICH NECESSITATES CHANGES IN INSTALLING SUCH SUBMITTED ALTERNATE EQUIPMENT, EVEN THOUGH SUCH COST MAY BE A PART OF ANOTHER DIVISION OF WORK. 4_6 SUBSTITUTIONS ARE SUBJECT TO THE APPROVAL OF THE OWNER. IF A SUBSTITUTION IS SUBMITTED, IT IS THE CONTRACTORS RESPONSIBILITY TO EVALUATE IT AND CERTIFY THAT THE SUBMISSION IS EQUIVALENT IN ALL RESPECTS TO THE BASE SPECIFICATIONS. 4_7 IF SUBSTITUTIONS ARE APPROVED, NOTIFY ALL OTHER CONTRACTORS, SUBCONTRACTORS, ETC., AFFECTED BY THE SUBSTITUTION AND FULLY COORDINATE WITH THEM. ANY COST RESULTING FROM SUBSTITUTION, WETHER BY THIS CONTRACTOR OR OTHERS, SHALL BE THE RESPONSIBILITY OF AND PAID FOR BY THE SUBSTITUTING CONTRACTOR. APPROVED SHOP DRAWINGS DO NOT ABSOLVE THIS CONTRACTOR FROM HIS RESPONSIBILITY. THIS SECTION INCLUDES BASIC MECHANICAL MATERIALS AND METHODS TO COMPLEMENT OTHER DIVISION 15 SECTIONS IN THIS SPECIFICATION AND REQUIREMENTS INDICATED ON THE MECHANICAL DRAWINGS. 2.0 SUPPORTS AND HANGERS 2_1 HANGERS AND SUPPORTS ARE TO BE PROVIDED TO PROPERLY SUPPORT, SECURE AND ALIGN PIPING AND TO MEET FIELD CONDITIONS AND AS MANUFACTURED BY GRINNELL OR MICHIGAN. 2_2 SPACING TO COMPLY WITH ASHRAE STANDARDS AND LOCAL CODE REQUIREMENTS. 3.0 ESCUTCHEONS 3_1 FIT ALL PIPE PASSING THROUGH WALLS, FLOORS OR CEILINGS IN FINISHED ROOMS WITH STEEL OR BRASS ESCUTCHEONS. WHERE SURFACE IS TO RECEIVE A PAINT FINISH MAKE ESCUTCHEONS PRIME PAINTED; OTHERWISE MAKE ESCUTCHEONS NICKEL OR CHROME PLATED. WHERE PIPING IS INSULATED, FIT ESCUTCHEONS OUTSIDE INSULATION. 4.0 PIPE IDENTIFICATION 4_1 IDENTIFY EACH PIPE, VALVE IN EQUIPMENT ROOMS, ABOVE ACCESSIBLE CEILINGS AND IN ACCESSIBLE SHAFTS. 4_2 COLOR CODE IDENTIFICATION BANDS OR MARKER BACKGROUNDS TO IDENTIFY CONTENTS OF PIPE AND DIRECTION OF FLOW LOCATED NEAR EACH VALVE AND FITTING, ON BOTH SIDES OF PIPE PASSING THROUGH WALLS AND ON LONG RUNS AT NOT OVER 20 FOOT INTERVALS. 5.0 ROOF CURBS 5_1 CURB SHALL BE 18 GAUGE GALVANIZED STEEL WITH CONTINUOUS WELDED SEAMS, WOOD NAILER, COUNTER FLASHING AND INSULATION. TOP OF CURB SHALL BE A MINIMUM OF 12" ABOVE THE FINISHED ROOF SURFACE. 5_2 PROVIDE CURB FOR ALL ROOF PENETRATIONS OF DUCTS AND PIPING. 5_3 ALL CUTTING AND PATCHING OF EXISTING ROOF SHALL BE BY THE OWNER'S ROOFING CONTRACTOR AND PAID FOR BY THE MECHANICAL CONTRACTOR. 6.0 FIRESTOPPING 6_1 ALL ROOF OPENINGS THROUGH FIRE RATED WALLS, FLOORS, AND/ORROOFS FOR DUCTWORK, PIPING, ETC., SHALL BE FIRE SEALED WITH CALCIUM SILICATE, SILICONE "RTV" FOAM, "3M" FIRE RATED SEALANTS, HILTI FIRESTOP SYSTEMS, OR APPROVED EQUAL TO MAINTAIN THE INTENDED FIRE RATING AND ASSOCIATED'UL' RATINGS 7.0 CUTTING, PATCHING AND DRILLING 7_1 ALL CUTTING AND PATCHING OF THE BUILDING CONSTRUCTION REQUIRED FOR THIS WORK SHALL BE BY THIS CONTRACTOR UNLESS SHOWN ON ARCHITECTURAL DRAWINGS AND CONFIRMED AS TO SIZE AND LOCATION PRIOR TO NEW CONSTRUCTION. CUTTING SHALL BE IN A NEAT AND WORKMANLIKE MANNER. 7_2 NEATLY SAW CUT ALL RECTANGULAR OPENINGS, SET SLEEVE THROUGH OPENING, AND FINISH PATCH OR PROVIDE TRIM FLANGE AROUND OPENING. 7_3 NEATLY SAW CUT FLOORS AND PATCH FLOOR TO MATCH EXISTING, INCLUDING FLOOR COVERING. 7_4 CONTRACTOR SHALL FILE VERIFY SLAB -ON -GRADE OR SUPPORTED FLOOR CONSTRUCTION TYPE PRIOR TO CUTTING. UNDER NO CIRCUMSTANCES SHALL THIS CONTRACTOR CUT A STRUCTURAL FLOOR SLAB, WHETHER ON GRADE OR SUPPORTED, WITHOUT PRIOR WRITTEN APPROVAL FROM THE ARCHITECT. IF FLOOR SLAB INDICATED TO BE CUT ON MECHANICAL PLANS IS FOUND TO BE STRUCTURAL IN NATURE, DO NOT CUT. CONTACT ARCHITECT IMMEDIATELY FOR FURTHER DIRECTIONS. 7_5 CORE DRILL AND SLEEVE ALL ROUND OPENINGS. 7_6 DO NOT CUT ANY STRUCTURAL COMPONENTS WITHOUT ARCHITECTS WRITTEN APPROVAL, INCLUDING, BUT NOT LIMITED TO ROOF JOISTS, COLUMNS, FLOOR JOIST, BEAMS, GIRDERS, STRUCTURAL FLOOR SLABS, ETC. 7_7 PATCH AND FINISH TO MATCH ADJACENT AREA THAT HAVE BEEN CUT, DAMAGED OR MODIFIED AS A RESULT OF THE INSTALLATION OF THE MECHANICAL SYSTEMS. FIRE STOP ALL PENETRATIONS OF FIRE RATED CONSTRUCTION IN A CODE APPROVED MANNER. 7_8 ALL CONTRACTORS SHALL CONFIRM WITH OWNER, PRIOR TO BID, TIMES AVAILABLE FOR NOISE PRODUCING WORK SUCH AS CUTTING AND CORE DRILLING OF FLOORS, WALLS, ETC., AS WELL AS TIMES FOR WORK WHICH REQUIRES ACCESS INTO ADJOINING TENANT SPACES, INCLUDE ANY PREMIUM TIME IN BID. 7_9 EXACT LOCATION OF ROOF TOP AIR CONDITIONING UNITS SHALL BE APPROVED BY THE STRUCTURAL ENGINEER, MECHANICAL CONTRACTOR SHALL FURNISH AND INSTALL ALL SUPPLEMENTAL SUPPORT STEEL FOR EQUIPMENT AND ROOF PENETRATIONS AFTER APPROVAL OF STRUCTURAL ENGINEER. 7.10 THE MECHANICAL CONTRACTOR SHALL COORDINATE WITH THE GENERAL CONTRACTOR PRIOR TO CONSTRUCTION. THE MECHANICAL CONTRACTOR SHALL PROVIDE INFORMATION REGARDING OPENINGS IN WALLS, FLOORS, ETC., CONCRETE EQUIPMENT PADS AND FOUNDATIONS TO THE GENERAL CONTRACTOR. IF THE MECHANICAL CONTRACTOR FAILS TO COMPLY WITH THIS REQUEST, OR IF INCORRECT INFORMATION IS GIVEN, THE NECESSARY CUTTING AND PATCHING WILL BE PERFORMED BY THE GENERAL CONTRACTOR, AT THE MECHANICAL CONTRACTOR'S EXPENSE. 8.0 DEMOLITION AND REMOVAL 8_1 DISCONNECT, CAP AND REMOVE ALL PIPING, DUCTWORK AND EQUIPMENT INDICATED ON THE DRAWINGS OR AS REQUIRED FOR THE PROJECT. 8_2 ANY EQUIPMENT DESIGNATED BY OWNER TO BE SALVAGED SHALL BE PROTECTED AND DELIVERED TO THE OWNER ON SITE. 8_3 DEMOLITION SHALL BE DONE INA MANNER SO AS NOT TO DAMAGE ADJACENT WORK AND NOT AFFECT THE OPERATION OF SYSTEMS TO REMAIN IN USE. ANY ITEM TO REMAIN THAT IS DAMAGED BY THE CONTRACTOR SHALL BE REPLACED AND/OR REPAIRED AT THE CONTRACTOR'S EXPENSE. 8_4 ALL OPEN ENDED PIPING AND DUCTWORK THAT IS TO REMAIN SHALL BE CAPPED AND PROPERLY SECURED. 8_5 ALL ELECTRICAL DEVICES, WIRING, CONDUIT, ETC., RELATED TO DEMOLISHED EQUIPMENT/SYSTEMS SHALL BE REMOVED. WIRING SHALL BE DISCONNECTED AT CIRCUIT BREAKERS, REMOVED AND "SPARE" BREAKERS MARKED 8_6 MECHANICAL CONTRACTOR SHALL REMOVE AND RECLAIM ANY REFRIGERANT IN EXISTING SYSTEMS PRIOR TO DEMOLITION OF ANY EQUIPMENT ACCORDING TO FEDERAL REQUIREMENTS. 8_7 ALL ASBESTOS REMOVAL WILL BE HANDLED BY THE OWNER AND IS NOT A PART OF THIS WORK 8_8 EXAMINE AREAS AND CONDITIONS UNDER WHICH DEMOLITION WORK MUST BE PERFORMED. THIS CONTRACTOR SHALL COORDINATE HIS WORK WITH OTHER TRADES PERFORMING DEMOLITION WORK AND/OR DEMOLITION WORK PERFORMED BY THE OWNER. 8_9 REMOVE ALL SUPPORTS, HANGERS, ETC., RELATED TO EQUIPMENT AND MATERIAL INDICATED TO BE DEMOLISHED. 8.10 WHERE TEMPERATURE CONTROLS ARE INDICATED FOR DEMOLITION, RETAIN THE SERVICES OF A TEMPERATURE CONTROL CONTRACTOR TO PERFORM SUCH DEMOLITION. DIVISION 15100 - INSULATION 1.0 GENERAL 1_1 FURNISH ALL MATERIAL, LABOR AND EQUIPMENT AS REQUIRED TO INSTALL COMPLETE PLUMBING AND HVAC INSULATION AS INDICATED ON MECHANICAL DRAWINGS AND IN THESE SPECIFICATIONS. 1_2 INSTALL IN FULL ACCORDANCE WITH MANUFACTURER'S RECOMMENDATIONS. 2.0 PLUMBING INSULATION 2_1 INSULATE ALL ABOVE GRADE HOT AND COLD WATER PIPING WITH MOLDED FIBERGLASS HAVING AN ALL SERVICE JACKET. 2.1a INSULATION THICKNESS SCHEDULE: 2.1a1 LESS THAN 1-1/2" DIAMETER PIPE: 3/4" THICK 2.1a21-12" DIAMETER PIPE: 1"THICK 2_2 INCLUDE INSULATION OF FITTINGS AND VALVES. KEEP VAPOR BARRIERS INTACT. APPLY TO MANUFACTURER'S RECOMMENDATIONS. 2_3 HANDICAPPED LAVATORY INSULATION - INSULATE ALL EXPOSED WASTE AND WATER SUPPLY PIPING UNDER LAVATORY WITH SAFETY COVERS PER ADA REQUIREMENTS AS MANUFACTURED BY PLUMBEREX SPECIALTY PRODUCTS, MCGUIRE OR TRUEBRO. 2_4 REPAIR SECTIONS OF EXISTING PIPING INSULATION DAMAGED OR DAMAGED DURING THIS CONSTRUCTION PERIOD. USE INSULATION OF SAME THICKNESS AS EXISTING INSULATION, INSTALL NEW JACKET LAPPING AND SEALED OVER EXISTING. 3.0 HVAC INSULATION 3.1 INSULATE ALL SUPPLY, RETURN, AND EXHAUST DUCTS WITH 1-1/2" THICK FOIL FACED REINFORCED KRAFT JACKET, FIBERGLASS DUCT WRAP FULLY SECURED TO DUCT. LAP AND TAPE SEAMS AND SECURE TIGHTLY TO THE DUCTS WITH WIRE OR STICK PINS. 3_2 ALL INSULATION TO BE APPLIED IN FULL ACCORDANCE WITH THE MANUFACTURER'S RECOMMENDATIONS AND COMPLY WITH 25/50 FLAME AND SMOKE HAZARD RATINGS PER ASTM E-84, NFPA 255 ABD UL 723. 3_3 INSULATE REFRIGERANT SUCTION LINE WITH 1/2" ELASTOMERIC FOAM INSULATION WITH JOINTS AND SEAMS SEALED VAPOR TIGHT. 3_4 INSULATE AIR CONDITIONING CONDENSATE DRAIN PIPING WITH 1/2" THICK MOLDED FIBERGLASS INSULATION. 3_5 PROVIDE REMOVABLE INSULATION SECTION TO COVER PARTS OF EQUIPMENT WHICH MUST BE OPENED PERIODICALLY FOR MAINTENANCE. INCLUDE METPL VESSEL COVERS, FASTENERS, FLANGES, CHILLED WATER PUMPS, FRAMES AND ACCESSORIES. 3_6 REPAIR DAMAGED SECTIONS OF EXISTING MECHANICAL INSULATION DAMAGED DURING THIS CONSTRUCTION PERIOD. USE INSULATION OF SAME THICKNESS AS EXISTING INSULATION, INSTALL NEW JACKET LAPPING AND SEAL OVER EXISTING. 3_7 REPLACE DAMAGED INSULATION WHICH CANNOT BE REPAIRED SATISFACTORILY, INCLUDING UNITS WITH VAPOR BARRIER DAMAGE AND MOISTURE SATURATED UNITS. DIVISION 15200 - PIPING AND VALVES 1.0 GENERAL 1_1 FURNISH ALL MATERIAL, LABOR, EQUIPMENT AND ACCESSORIES AS REQUIRED TO INSTALL COMPLETE PLUMBING AND HVAC PIPING SYSTEMS AS INDICATED ON MECHANICAL DRAWINGS AND IN THESE SPECIFICATIONS. 1_2 INSTALL IN FULL ACCORDANCE WITH LOCAL CODE REQUIREMENTS, OTHER SPECIFICATION SECTION REQUIREMENTS AND MANUFACTURER'S RECOMMENDATIONS 2.0 CONNECTIONS TO EQUIPMENT FURNISHED BY OTHERS 2_1 PROVIDE VALVED WATER AND/OR GAS CONNECTION FOR EQUIPMENT FURNISHED BY OTHER CONTRACTORS OR OWNER. 2_2 INCLUDE ACCESSORIES REQUIRED BY CODE, DRAWING OR MANUFACTURER'S INSTRUCTIONS. 2_3 FULLY COORDINATE WITH KITCHEN EQUIPMENT AND LAUNDRY SUPPLIERS AND CONFIRM ALL ROUGH -IN REQUIREMENTS PRIOR TO STARTING WORK 3.0 SANITARY AND STORM SEWERS 3_1 INSTALL SANITARY AND STORM SEWERS, STACKS, VENTS, DRAINS, CLEANOUTS, ETC., AS INDICATED ON THE DRAWINGS. 3_2 SEWERS TO BE PITCHED A MINIMUM OF 1/4" PER FOOT FOR 3" SIZES AND UNDER AND 1/8" PER FOOT FOR 4" SIZES AND LARGER OR TO GRADES INDICATED ON PLANS. 3_3 CHANGES IN DIRECTION AND BRANCH CONNECTIONS SHALL BE MADE WITH APPROVED DRAINAGE FITTINGS COMPATIBLE WITH THE PIPING SYSTEM MATERIAL WHICH IS INSTALLED. 3_4 ALL FIXTURES AND SANITARY DRAINS SHALL BE VENTED AS INDICATED ON DRAWINGS AND IN ACCORDANCE WITH CODE. 3_5 VENTS ARE TO BE EXTENDED THROUGH ROOF AS INDICATED ON DRAWINGS AND FLASHED WITH 4 LB. LEAD WITH VENT FLASHING TOP TURNED DOWN TWO (2) INCHES MINIMUM INSIDE PIPE 3_6 PVC PIPING SHALL NOT BE INSTALLED UNLESS PERMITTED BY CODE AND SHALL NOT BE INSTALLED IN RETURN AIR PLENUMS. 3_7 SANITARY AND VENT MATERIAL SHALL BE AS FOLLOWS: 3.7a BELOW GRADE STORM AND SANITARY INSIDE BUILDING. 3.7a1 SERVICE WEIGHT - CAST IRON PIPE ASTM A-74-82 WITH ASTM C-56470 NEOPRENE COMPRESSION JOINTS OR NO HUB WITH CLAMPS. 3.7a2 PVC -DMV PLASTIC ASTM D-1785 WITH ASTM D-2665 DMV SOLVENT WELD SOCKET FITTINGS. 3.7b ABOVE GRADE SANITARY/STORM SEWER AND VENT MATERIAL SHALL BE AS FOLLOWS: 3.7b1 NO -HUB CAST IRON PIPE CISP11-301-78. 3.7b2 SCH. 40 GALVANIZED STEEL PIPE ASTM A-120-83 WITH CAST IRON SCREWED FITTINGS ANSI B-16.221983. 4.0 DOMESTIC WATER PIPING 4_1 INSTALL DOMESTIC WATER PIPING AS INDICATED ON DRAWINGS. INCLUDE ALL FITTINGS, VALVES, HANGERS, AND OTHER ACCESSORIES INCLUDING WATER METER AND BACKFLOW PREVENTER. EXTEND DOMESTIC WATER PIPING TO ALL FIXTURES AND EQUIPMENT REQUIRED FOR COMPLETE INSTALLATION. 411-2 INCLUDE UNIONS, OR OTHER DISCONNECT MEANS, STOPS OR VALVES FOR ISOLATION OF FIXTURES AND EQUIPMENT. VALVES TO BE FULLY COMPATIBLE WITH PIPING FOR SERVICE INTENDED AS MANUFACTURED BY NIBCO, CRANE OR MILWAUKEE. INCLUDE HOSE OR DRAIN VALVES AT LOW POINTS WHERE FIXTURES CANNOT BE USED FOR DRAINAGE. 4_3 INSTALL SHOCK ABSORBERS AT EACH QUICK CLOSING FIXTURE AND WHERE REQUIRED TO PREVENT WATER HAMMER AS MANUFACTURED BY J.R. SMITH SIOUX CHIEF OF ZURN. 4_4 HANGERS ON INSULATED PIPE TO BE OUTSIDE OF INSULATION, SIZED ACCORDINGLY AND WITH A SUFFICIENT SADDLE TO PROTECT INSULATION AS MANUFACTURED BY GRINNELL OR MICHIGAN. 4_5 DOMESTIC WATER PIPING SHALL BE AS FOLLOWS: 4.5a ABOVE GRADE - TYPR "L" HARD COPPER ASTM B 88-832 WITH WROUGHT COPPER FITTINGS ASTM B 16.22 1980 AND NON -LEAD OR ANTIMONY SOLDER JOINTS. 4.5b BELOW GRADE -TYPE "K" SOFT COPPER WITHOUT JOINTS. 4_6 FLUSH, VENT AND SANITIZE ALL WATER PIPING WITH CHLORINE AS REQUIRED PER AWWA, LOCAL BUILDING DEPARTMENT AND HEALTH DEPARTMENT CODES. 4_7 DOMESTIC HOT AND COLD WATER PIPING UNDER CONCRETE FLOOR TO BE COVERED WITH SAND SO THAT PIPING WILL NOT BECOME EMBEDDED IN THE FLOOR SLAB. 4_8 ALL PIPING UNDER CONCRETE FLOOR SHALL BE TYPE "K" SOFT COPPER, CONTINUOUS. NO SPLICES OR FITTINGS WILL BE ALLOWED. 4_9 EXTREME CAUTION MUST BE TAKEN SO THAT NO COPPER PIPING AND INSULATION UNDER CONCRETE FLOOR BECOMES CRUSHED, CUT, SPLIT OR DEFORMED DURING THE POURING OF THE FLOOR SLAB. 5.0 FIRE PROTECTION PIPING 5_1 SEE SECTION 15300, FIRE PROTECTION SYSTEMS. 6.0 FIRESTOPPING 6_1 SEE SECTION 15050, BASIC MATERIALS AND METHODS. DIVISION 15500 - HEAT GENERATION EQUIP ENT 1.0 GENERAL 1_1 FURNISH ALL MATERIAL, LABOR, EQUIPMENT, AND ACCESSORIES AS REQUIRED TO INSTALL EQUIPMENT AS INDICATED ON MECHANICAL DRAWINGS. 1_2 INSTALL IN FULL ACCORDANCE WITH LOCAL CODE REQUIREMENTS, OTHER SPECIFICATION SECTION REQUIREMENTS, AND MANUFACTURER RECOMMENDATIONS. 2.0 EQUIPMENT SCHEDULES 2_1 SEE EQUIPMENT SCHEDULES ON MECHANICAL DRAWINGS. DIVISION 15700 - HVAC SYSTEMS AND EQUIPENT 1.0 GENERAL 1_1 FURNISH ALL EQUIPMENT, MATERIALS, LABOR, TOOLS, ETC., FOR THE COMPLETE HVAC SYSTEM. INSTALL COMPLETE AND PLACE IN OPERATION. 1_2 CONTRACTORS BIDDING THIS PROJECT SHALL VISIT THIS SITE AND FAMILIARIZE THEMSELVES WITH ALL CONDITIONS AFFECTING THEIR WORK SUBMISSION OF A BID ON THIS PROJECT SHALL BE CONSTRUED AS HAVING SUCH KNOWLEDGE. 1_3 VERIFY EXACT CONDITIONS IN FIELD AND COORDINATE WITH THESE DRAWINGS AND OTHER TRADES BEFORE BEGINNING NEW WORK 1_4 DETERMINE EXACT LOCATIONS FOR ALL NEW AND RELOCATED EQUIPMENT, PIPING, CONDUITS AND DUCTWORK IN FIELD. 1_5 COORDINATE WORK OF THIS CONTRACT WITH OTHER TRADES. CONFLICTS SHALL IMMEDIATELY BE BROUGHT TO THE ATTENTION OF THE ARCHITECT. ARCHITECTS RESOLUTION TO CONFLICTS SHALL BE FINAL. 1_6 ANY DISCREPANCIES BETWEEN WHAT IS SHOWN ON DRAWINGS OR SPECIFIED AND THE ACTUAL CONDITIONS IN THE FIELD SHALL IMMEDIATELY BE BROUGHT TO THE ATTENTION OF THE ARCHITECT BEFORE PROCEEDING. 1_7 BUILDING AND SURFACES DAMAGED DURING INSTALLATION SHALL BE REPAIRED, REPLACED, AND/OR RESTORED TO ORIGINAL CONDITION AFTER COMPLETION OF WORK AND BEFORE ACCEPTANCE BY OWNER. 2.0 EQUIPMENT 2_1 MECHANICAL CONTRACTOR TO FURNISH ALL HVAC EQUIPMENT INDICATED AND/OR SCHEDULED ON THE DRAWINGS COMPLETE WITH BASES, ISOLATORS, SUPPORTS AND OTHER REQUIRED ACCESSORIES. 2_2 INSTALL COMPLETE AND PLACE IN PROPER OPERATION PER MANUFACTURER'S RECOMMENDATIONS, LUBRICATE AND ADJUST AS REQUIRED. FURNISH AND INSTALL CLEAN SET OF FILTERS PRIOR TO BALANCING. 2_3 EQUIPMENT TO BE MAKE AND MODEL AS SCHEDULED UNLESS ALTERNATE EQUIPMENT OF EQUIVALENT QUALITY AND PERFORMANCE IS SUBMITTED AS A SUBSTATION PRIOR TO BIDDING. ALL SUBSTITUTIONS ARE SUBJECT TO ACCEPTANCE WITHOUT QUALIFICATION BY OWNER, ENGINEER AND ARCHITECT. 2_4 CONTRACTOR SHALL PERFORM ROUTINE SERVICE INSPECTION OF ALL EXISTING HVAC EQUIPMENT TO REMAIN. LUBRICATE BEARINGS, SERVICE CONTROL SYSTEMS, REPLACE FAN BELTS AND INSTALL NEW FILTERS IN EACH ROOFTOP UNIT. 2_5 CONTRACTOR SHALL FIELD VERIFY REFRIGERANT CHARGE AND ADD REFRIGERANT IF THE CHARGE IS LESS THAN MANUFACTURER'S SPECIFICATIONS 2_6 SUBMIT SERVICE REPORT TO TENANT INDICATING CONDITION OF UNITAND REPORTANY MAJOR COMPONENT FAILURES OR MALFUNCTIONS. REPORT SHALL INCLUDE COST TO SERVICE ALL MALFUNCTIONING OR DAMAGED ITEMS LISTED. COST SHALL INCLUDE PARTS AND LABOR, EQUIPMENT SHALL BE PLACED IN FULL OPERATION WITH CONTROLS CALIBRATED UPON COMPLETION OF PROJECT. 3.0 COOLING COIL CONDENSATE DRAINS 3_1 PROVIDE EACH ROOFTOP UNIT WITH A FOUR (4) INCH DEEP TRAPPED CONDENSATE DRAIN WITH CLEANOUT OF SCHEDULE 40 PVC. TERMINATE OVER CONCRETE SPLASH BLOCK ON ROOF OR AS REQUIRED PER LOCAL CODE. 4.0 EQUIPMENT SCHEDULES 4_1 SEE EQUIPMENT SCHEDULES ON MECHANICAL DRAWINGS. DIVISION 15800 - AIR DISTRIBUTION SYSTEMS 1.0 GENERAL 1_1 FURNISH ALL MATERIALS, LABOR, EQUIPMENT AND ACCESSORIES REQUIRED TO INSTALL COMPLETE AIR DISTRIBUTION SYSTEMS. 1_2 CONTRACTORS BIDDING THIS PROJECT SHALL VISIT THIS SITE AND FAMILIARIZE THEMSELVES WITH ALL CONDITIONS AFFECTING THEIR WORK. SUBMISSION OF A BID ON THIS PROJECT SHALL BE CONSTRUED AS HAVING SUCH KNOWLEDGE. 1_3 VERIFY EXACT CONDITIONS IN FIELD AND COORDINATE WITH THESE DRAWINGS AND OTHER TRADES BEFORE BEGINNING NEW WORK. 1_4 DETERMINE EXACT LOCATIONS FOR ALL NEW AND RELOCATED DUCTWORK AND ACCESSORIES FIELD. 1_5 COORDINATE WORK OF THIS CONTRACT WITH OTHER TRADES. 1_6 ANY DISCREPANCIES BETWEEN WHAT IS SHOWN ON DRAWINGS OR SPECIFIED AND THE ACTUAL CONDITIONS IN THE FIELD SHALL IMMEDIATELY BE BROUGHT TO THE ATTENTION OF THE ARCHITECT BEFORE PROCEEDING. 1_7 BUILDING AND SURFACE DAMAGED DURING INSTALLATION SHALL BE REPAIRED, REPLACED, AND/OR RESTORED TO ORIGINAL CONDITION AFTER COMPLETION OF WORK AND BEFORE ACCEPTANCE BY OWNER. 1_8 PROVIDE ACCESS PANELS AT ALL GYPSUM BOARD CEILING WHERE MECHANICAL OR PLUMBING ARE CONCEALED ABOVE. 2.0 DUCTWORK 2_1 FABRICATE AND ERECT ALL DUCTWORK TO ASHRAE AND SMACNA STANDARDS FROM NO. 1 GALVANIZED STEEL. COMPLY WITH NFPA 90A REQUIREMENTS. 2_2 DUCTWORK SHALL BE SMACNA LOW PRESSURE CONSTRUCTION 2" STATIC PRESSURE RATING WITH SEAL CLASS B SEAMS AND JOINTS. 2_3 INCLUDE ALL ACOUSTIC, AIRFOIL SHAPED PERFORATED ALUMINUM TURNING VANES, MANUAL DAMPERS, FLEXIBLE CONNECTORS, GRILLES AND DIFFUSERS, ACOUSTIC LINING, AND OTHER SHEET METAL ACCESSORIES FOR THE PROJECT. 2_4 ALL BRANCH CONNECTION FITTINGS IN RECTANGULAR DUCTWORK SHALL BE 45 DEGREE TRANSITION TYPE, CONICAL FITTINGS OR SPIN -IN FITTINGS WITH INTEGRAL AIR SCOOPS. BUTT FITTINGS ARE NOT ACCEPTABLE. 2_5 INSTALL TWO (2) INCH DEEP SECONDARY DRAIN PAN BELOW DOMESTIC WATER HEATERS. PIPE THREE -FOURTH (3/4) INCH DRAIN TO FLOOR DRAIN INDEPENDENTLY OF ALL OTHER DRAINS. 2_6 EXHAUST DUCT OUTLETS SHALL BE INSTALLED A MINIMUM OF 10L "FROM ALL OUTSIDE AIR INTAKES.' " 3.0 DUCT LINER 3_1 ACOUSTIC LINE ALL RECTANGULAR DUCTS INDICATED ON DRAWINGS WITH ONE (1) INCH THINK NON -FLAKING, COATED MEDIUM DENSITY LINER, APPLY TO MANUFACTURER'S RECOMMENDATIONS. 3_2 DUCT DIMENSIONS INDICATED ON DRAWINGS ARE CLEAR INSIDE DIMENSIONS (FREE AREA). 3_3 ALL RECTANGULAR DUCTWORK DOWNSTREAM OF FPVAV BOXES SHALL BE LINED WITH 1" COATED MEDIUM DENSITY LINER. APPLY TO MANUFACTURER'S RECOMMENDATIONS. 3_4 DUCT LINER SHALL COMPLY WITH NFPA 90A AND 90B (LATEST EDITION) REQUIREMENTS. 4.0 DUCTACCESSORIES 4_1 FLEXIBLE DUCTWORK (AS MANUFACTURED BY CLEVAFLEX, FLEXMASTER OR WIREMOLD). FLEXIBLE DUCTS SHALL BE INDEPENDENTLY SUPPORTED FROM THE STRUCTURE AND CONNECTED WITH PLASTIC DRAW BANDS AND TIGHTENED. FLEXIBLE DUCTS SHALL BE LIMITED TO 48" MAXIMUM STRAIGHT LENGTHS. FLEXIBLE DUCTS SHALL BE CONSTRUCTED OF 1-1/2" INSULATION WITH VINYL VAPOR BARRIER JACKET AND RATED AT 10 W.C. FOR SIZES. THROUGH 12", U.L. LISTED, AND MEET 25/50 FLAME AND SMOKE TEST. FLEXIBLE DUCTS ARE NOT PERMITTED IN ROOMS WITHOUT CEILINGS. 4_2 DAMPERS (AS MANUFACTURED BY RUSKIN, NAILOR OR SAFE -AIR) FABRICATE IN ACCORDANCE WITH SMACNA STANDARDS. PROVIDE END BEARINGS AND LOCKING, INDICATING QUADRANT REGULATORS. BLADE TO BE SINGLE THICKNESS WITH CONTINUOUS HINGE OR ROD. 4_3 CONTROL DAMPERS (AS MANUFACTURED BY RUSKIN, NAILOR OR SAFE -AIR) FABRICATE BLADE OF DOUBLE THICKNESS SHEET METAL, OPPOSED BLADE TYPE WITH SELF -ALIGNING ROD AND END BEARING SUITABLE FOR USE WITH AN ACTUATOR. LL MECHANICAL NOTES (CONTINUED FROM PREVIOUS PAGE) 30.TENANT'S GENERAL CONTRACTOR, AT TENANT'S EXPENSE, SHALL BE REQUIRED TO FURNISH TEMPORARY WEATHERPROOFING FOR ALL ROOF PENETRATIONS; UNTIL LANDLORD'S ROOFING CONTRACTOR HAS MADE FINAL WEATHERPROOF PATCHES, ATTENANT'S EXPENSE.: TENANT`S STORE SPACE NUMBER SHALL BE PERMANENTLY STENCILED ON ONE SIDE OF ANY ROOF -MOUNTED HVAC UNIT, WITH MINIMUM THREE-INCH (3-) HIGH LETTERS: 31 ALL ROOF AND SLAB PENETRATIONS MADE BY TENANT'S GENERAL CONTRACTOR SHALL CONFORM TO LANDLORD'S STANDARD CRITERIA AND SHALL BE SUBJECT TO LANDLORD'S APPROVAL AS TO LOCATION AND CONSTRUCTION DETAILS. WEATHERPROOFING OF ANY ROOF PENETRATIONS REQUIRED BY TENANT SHALL BE PERFORMED BY LANDLORD'S AUTHORIZED ROOFING CONTRACTOR: TENANT'S GENERAL CONTRACTOR SHALL PAY ALL SUCH COSTS, THEREFORE, DIRECTLY TO SUCH ROOFING CONTRACTOR UPON THEIR DEMAND. ANY FAILURE TO FOLLOW THIS PROCEDURE, AND ANY DAMAGES RESULTING THEREFROM, SHALL BE AT THE TENANTS SOLECOST AND EXPENSE. 32.INSTALL ALL DUCTWORK AS TIGHT TO STRUCTURE AS POSSIBLE. ROUTE TO AVOID LIGHT FIXTURES. MAINTAIN DUCT HEIGHTS TO ACCOMMODATE CEILING HEIGHTS. REFER TO REFLECTIVE CEILING PLAN. 33.RIGID HVAC DUCTWORK SHALL BE SHEET METALL$ GALVANIZED STEEL aR ALUMINUM. FIBERGLASS DUCT BOARD OR OTHER NONMETALLIC MATERIAL IS NOT ACCEPTABLE. KITCHEN GREASE AND DISHWASHER'EXHAUST DUCTS SHALL BE 18 -GAUGE STAINLESS STEEL SHEET METAL WITH CONTINUOUSLY WELDED JOINTS AND SEAMS. KITCHEN GREASE EXHAUST DUCTS SHALL BE WRAPPED CONTINUOUSLY WITH AN APPROVED FIDE WRAP PRODUCT. 34.VERIFY INFIELD THAT THERE IS A CLEAR PATHWAY FOR THE HOOD DUCTWORK AND SPACE ON THE ROOF FOR THE NEW EXHAUST UNIT. IF THERE ARE ANY OBSTRUCTIONS, COORDINATE WITH WESTFIELD REPRESENTATIVE. 35.MAKE-UP AIR SYSTEMS ARE REQUIRED FOR ALL EXHAUST SYSTEMS DESIGNED FOR A MAX 90% OF ALL EXHAUST AIR QUANTITY. THE EXHAUST AND MAKE-UP AIR SYSTEMS SHALL BE ELECTRICALLY INTERLOCKED SO THAT ONE SWITCH ACTIVATES BOTH, 36.PROVIDE COMPLETE SPECIFICATION OF TYPE OF INSULATION AND FIRE -RATING DETAILS OF SHAFT. 37.ENSURE THERE IS PROPER SEPARATION BETWEEN SUPPLY AIR INTAKE' DUCTS AND EXHAUST DUCTS (A MINIMUM OF 10'), DIRECTION OF DISCHARGE IS AWAY FROM SUPPLY INTAKE DUCTS AND EXHAUST IS DOWNWIND, 38.PROVIDE LANDLORD WITH COPY OF TESTING AND BALANCING REPORT UPON COMPLETION. REVIEWED FOR CODE COMPLIANCE APPROVED '• OCT 14 2016 City of Tukwila BUILDING DIVISION , EIVED TUKWILA ©Cr 12 2016 PERMIT CENTER F E DATE 09/22/16 Q' 1 PLAN CHECK 09/28/16 ALL COMMENTS These drawings/specifications are the property of Kamus + Keller. They are furnished as contract documents only. The seal(s) and signature(s) apply only to the documents to which they affixed, and expressly dispialm any responsibility for all other plans, specifications, estimates, reports or other documents or instruments relating to or intended to be used for any part or parts of the architectural or engineering project. Additionally these drawings and seal(s) shall in no way convey or imply any time of warranty or certification relating to the performance of products and materials beyond those provided by their respective manufacturer. PROJECT NO. 16.0430.01 DRAWN/REVIEWED GFIBB DATE/ISSUE 09.07.2016 SHEET TITLE MECHANICAL SPECIFICATIONS SHEET NO. M1.1 r N a J J of J r> DO a-/00 C F WUJz< W~ W <C III W �W = � J F- 06 f.- _ p U) W F- O C:) C) T_ These drawings/specifications are the property of Kamus + Keller. They are furnished as contract documents only. The seal(s) and signature(s) apply only to the documents to which they affixed, and expressly dispialm any responsibility for all other plans, specifications, estimates, reports or other documents or instruments relating to or intended to be used for any part or parts of the architectural or engineering project. Additionally these drawings and seal(s) shall in no way convey or imply any time of warranty or certification relating to the performance of products and materials beyond those provided by their respective manufacturer. PROJECT NO. 16.0430.01 DRAWN/REVIEWED GFIBB DATE/ISSUE 09.07.2016 SHEET TITLE MECHANICAL SPECIFICATIONS SHEET NO. M1.1 r N a GENERAL NOTES 1. CONTRACTOR TO FAMILIARIZE HIMSELF WITH THE SITE AND VERIFY EXISTING CONDITIONS PRIOR TO CONSTRUCTION AND ADJUST FOR ACTUAL FIELD CONDITIONS AT NO EXPENSE TO OWNER. REPORT TO THE ARCHITECT AND OR ENGINEER ANY DISCREPANCIES WITH THE PLANS AND EXISTING CONDITIONS. 2. PROVIDE RETURN AIR FILTERS AT HVAC UNITS ON ROOF, NOT AT RETURN AIR GRILLE IN SPACE. 3. ALL EXHAUST AIR TERMINATIONS TO BE MINIMUM 15'1 FROM ANY AIR INTAKE. 4. ALL DUCTWORK, HANGERS, DAMPER CONSTRUCTION, SEAMS, INSTALLATION, ETC., SHALL CONFORM TO THE STANDARDS AS ADOPTED BY A.S.H.R.A.E. & SMACNA. ALL WORK SHALL CONFORM TO ALL APPLICABLE LAWS, RULES & REGULATIONS & RECOMMENDATIONS OF LOCAL BUILDING DEPARTMENT, NATIONAL BOARD OF FIRE UNDERWRITERS, N.F.P.A., & SHOPPING CENTER GENERAL SPECIFICATIONS. ALL DUCTWORK SHALL BE SHEETMETAL CONFORMING TO SMACNA STANDARDS FOR LOW PRESSURE DUCTWORK & A.S.H.RA.E. STANDARD 90-75. 5. THE MECHANICAL CONTRACTOR SHOULD FURNISH, CONNECT AND INSTALL THE THERMOSTAT/CONTROL WIRING AND THE ELECTRICAL CONTRACTOR SHOULD PROVIDE, INSTALL AND CONNECT THE ELECTRIC TO THE UNITS. 6. SCHEDULE OF WORK: THIS CONTRACTOR SHALL BE REQUIRED TO FAMILIARIZE HIMSELF WITH THE PROPOSED WORK SCHEDULE & SHALL COORDINATE HIS WORK SCHEDULE WITH THE OTHER TRADES, SO THAT WORK PROGRESSES CAN BE PLANNED IN A PROPER SYSTEMATIC FASHION TO AVOID ANY DUPLICATION OF EFFORT & RESULTANT DELAY OF PROJECT. 7. CUTTING & PATCHING: THIS CONTRACTOR MUST LAY OUT HIS WORK IN ADVANCE OF NEW CONSTRUCTION IN ORDER THAT UNNECESSARY CUTTING & PATCHING WILL BE AVOIDED. OPENINGS SHALL BE REUSED AS SHOWN AND ANY MODIFICATIONS TO ROOF OPENINGS SHALL BE APPROVED BY THE LANDLORD, DONE BY THE LANDLORD'S ROOFING CONTRACTOR AND PAID FOR BY THE CONTRACTOR. 8. SUPPLY DUCTWORK INSIDE BUILDING SHALL BE INSULATED WITH 1/2" ALUMINUM FOIL FACED FIBERGLASS BLANKET OVERLAPPED ON ALL DUCTWORK SHALL BE INSTALLED IN CONCEALED SPACE ABOVE CEILINGS. 9. PROVIDE CLEAR ACCESS TO ALL EQUIPMENT WITHIN THE LEASED SPACE. 10. CONTRACTOR SHALL PROVIDE OPERABLE H & V SYSTEMS COMPLETE IN ALL RESPECTS AS CONTEMPLATED BY THE INFORMATION INDICATED ON THE DRAWINGS. IT IS NOT INTENDED THAT THE DRAWINGS & SPECIFICATIONS INDICATE EACH & EVERY ITEM OF INFORMATION NECESSARY FOR COMPLETE SYSTEMS BUT INDICATE SUFFICIENT INFORMATION FOR THE CONTRACTOR TO SECURE ADDITIONAL INFORMATION FROM OTHER SOURCES & PROVIDE ALL MATERIALS, EQUIPMENT & LABOR NECESSARY FOR COMPLETE INSTALLATIONS. 11. ALL LABOR, MATERIALS & EQUIPMENT SHALL BE PROVIDED WITH ONE YEAR GUARANTEE FROM DEFECTS. 12. PROVIDE ARCHITECT WITH THREE (3) COPIES OF AIR BALANCE REPORT. INSTRUCT OWNER IN USE OF EQUIPMENT. AIR BALANCE REPORT TO BE AN INDEPENDENT TESTING AGENCY. AIR BALANCE TEST REPORT TO BE TAKEN IN THE LATE AFTERNOON WITH THE FOLLOWING TEMPERATURE READINGS DOCUMENTED (IN ADDITION TO CFM) 1.) TEMPERATURE OF AIR LEAVING EACH CEILING DIFFUSER, 2.) TEMPERATURE OF AIR LEAVING HVAC UNIT, 3.) TEMPERATURE OF OUTSIDE AIR AT HVAC UNIT, 4.) TEMPERATURE OF AIR WITHIN SALES AREA (AT THERMOSTAT). 13. LOCATE CURBS OVER LOAD BEARING SUPPORTS AND IN CLOSE PROXIMITY TO EQUIPMENT LOCATION AS INDICATED ON PLANS. 14. COORDINATE WITH LANDLORD'S AUTHORIZED STRUCTURAL ENGINEER AS REQUIRED. 15. INSTALL CURB AND COORDINATE OPENINGS IN ROOF. OPENINGS TO BE AS SPECIFIED IN INSTALLATION MANUALS. 16. THE T.G.C. SHALL FIELD VERIFY THE LOCATIONS OF EXISTING HVAC SYSTEMS, EQUIPMENT AND DEVICES. 17. THE T.G.C. SHALL PROVIDE REQUIRED STRUCTURAL SUPPORT FOR ANY NEW ROOF MOUNTED OR SUSPENDED HEATING, VENTILATION, OR AIR CONDITIONING EQUIPMENT AS REQUIRED. THE T.G.C. SHALL COORDINATE SIZES AND PLACEMENT OF UNITS WITH THE MECHANICAL SUBCONTRACTOR AND THE LANDLORD. 18. ALL ROOF CURBS/PENETRATIONS ARE TO BE INSTALLED IN STRICT ACCORDANCE WITH THE EQUIPMENT MANUFACTURER'S DETAILS. ALL REQUIRED ROOFING SHALL BE BY THE LANDLORD'S DESIGNATED ROOFING CONTRACTOR AS REQUIRED TO MAINTAIN THE WARRANTY AND INTEGRITY OF THE ROOF. NOTES BY SYMBOL OEXISTING AIR HANDLERS, AND CONDENSING UNITS TO REMAIN. VERIFY LOCATION OF UNIT FIELD PRIOR TO BID. (D EXISTING THERMOSTATS TO REMAIN EXISTING O/A DUCT TO REMAIN EXISTING RESTROOM EXHAUST FAN TO REMAIN OEXISTING CONDENSER LOOP TO REMAIN G EXISTING TOILET ROOM TO REMAIN AS IS. THE CONTRACTOR SHALL INSPECT ENTIRE PLUMBING SYSTEM AND PROVIDE SERVICE AND/OR REPAIRS AS REQUIRED TO ENSURE PROPER, DEPENDABLE OPERATION. THE EXISTING FIXTURES TO BE REUSED SHALL BE DISINFECTED, CLEANED AND/OR REFURBISHED TO THE TENANTS SATISFACTION. REFER TO ARCHITECTURAL DRAWINGS FOR ANY ADJUSTMENTS THAT MAY BE REQUIRED TO COMPLY WITH CODE ISSUES. O7 EXISTING CONDENSATE LINE TO REMAIN HVAC EXISTING SYSTEM NOTES 1 T.G.C. SHALL PROVIDE THE FOLLOWING (BUT NOT LIMITED TO): THE COMPLETE LUBRICATION OF ALL SHAFTS AND BEARINGS THAT HAVE LUBRICATION ZERTS. 2. THE REPLACEMENT OF ALL BELTS, HOSES AND FABRIC/RIBBER COATED ITEMS THAT ARE SUBJECT TO WEAR. 3. THOROUGH CLEANING OF COILS. THE STRAIGHTENING (COMBING) OF ALL LOUVERS & FINS. 4. EXAMINE AND REPAIR ALL ELECTRICAL WIRING, CONTROLS, STARTERS, RELAYS, CAPACITORS AND LIKE ITEMS THAT TEND TO DETERIORATE OVER TIME OR BECOME NONOPERATIONAL. THIS INCLUDES SMOKE DETECTORS. 5. THE REPLACEMENT OF "LIFETIME" BUSHINGS AND BEARINGS THAT ARE SEALED AND CANNOT BE LUBRICATED BUT ARE IN FACT WORN BEYOND REASONABLE USE. 6. THE REPLACEMENT OF ALL DISPOSABLE FILTERS ON THE DAY OF THE STORE'S GRAND OPENING. 7. VERIFY ANY WORK REQUIRED BY THE LANDLORD PRIOR TO BID. 8. CHECK/REPAIR CONDENSATE DRAIN LINE AND PAN. 2" WIDE MIN. DUCT STRAP 48" O.C. MAX. RIGID ROUND METAL DU( EXTERNALLY INSULATED RIGID ROUND DUCT ELBC EXTERNALLY INSULATED INSULATED FLEXIBLE - DUCT MAX. LENGTH 5'-0" VOLUME DAMPER (FOR FINAL BALANCE ADJUSTMENT) DIFFUSER TRIM FRAME- DIFFUSER Z� DEMISING WALLS GO TO DECK METAL SUPPLY DUCT J EXTERNALLY INSULATED CEILING r d[ -II 11111qe i-. _ t 7 118"0 CITY REQUIREMENT: -ALL WORK SHALL COMPLY WITH CURRENT 2015 CODES AT&T i f - TENANT i = SPACE r a I i�♦.. ' • 1 } r...E �-1 i f�-s .. i -It YY • ..•; L� Iii 1-1 jet L E-, v •.� IF < • � , rl � •• � a s;�s .. r' r IJ �� J f • _ • f •` 1 i •. 1 ff i:v_caT.ayi�n � •• out t7� I i M i rv.I . C- F7 ! • 1;-T3 ` ..yds, •-.x',�..I r r� -� C~tel s ti � .",� , L 3 '.� �• ��� SITE LA 0 9CAL E: NTS DEMISING WALLS GO TO DECK A F4A F4A `. F4A' :. • :.' F4A ::. . ' F4A F -4A :. F4A:...: :: .:F4A .' • ; V32-07 REVIEWED FOR =DE COMPLIANCE >; APPROVED OCT 14 2Q16 i. t City Of-rukVilla BUILDING DIVISION J J :•. .. ....:.. : ..... 0 L. ........... 118"0 CITY REQUIREMENT: -ALL WORK SHALL COMPLY WITH CURRENT 2015 CODES AT&T i f - TENANT i = SPACE r a I i�♦.. ' • 1 } r...E �-1 i f�-s .. i -It YY • ..•; L� Iii 1-1 jet L E-, v •.� IF < • � , rl � •• � a s;�s .. r' r IJ �� J f • _ • f •` 1 i •. 1 ff i:v_caT.ayi�n � •• out t7� I i M i rv.I . C- F7 ! • 1;-T3 ` ..yds, •-.x',�..I r r� -� C~tel s ti � .",� , L 3 '.� �• ��� SITE LA 0 9CAL E: NTS DEMISING WALLS GO TO DECK A F4A F4A `. F4A' :. • :.' F4A ::. . ' F4A F -4A :. F4A:...: :: .:F4A .' • ; V32-07 REVIEWED FOR =DE COMPLIANCE >; APPROVED OCT 14 2Q16 i. t City Of-rukVilla BUILDING DIVISION 1 DEMISING WALLS GO TO DECK -(2)D P F4A- .. •� .' LL C IC L 'CL.G SCALE: 1/4'1 .. CLG _ .n1 --CIEIVED CITY OF TUKWILA OCT 12 2016 PERMIT CENTER I�IIIII� ISSUE DATE � 09/22/16 I r \ PLAN CHECK', 09/28/16 ALL COMMENTS T 1:13 m00 N r at: CD T o � ,n to 6 C Co r �M> =mo�� mCD(7au. N C C (D I) C C U ■ C C N IQ_ C O .a J J L 0 00 LL Q WP W <C W = W 0 _ L6 [- 111- 4 Q0Ofn 'Lit W CLP F4A' Q : ia"O to''fa F12 '.. F12-. F12 - F12 F4A. .. •. 350 :. 3S0 350 (2)D. 0 CLG • F4A.: �.. CD CD�. tl Ll' L L LL 11 ., r- (I.. ' 'F4A F4AF4A: --F4A F4A F4A 1 DEMISING WALLS GO TO DECK -(2)D P F4A- .. •� .' LL C IC L 'CL.G SCALE: 1/4'1 .. CLG _ .n1 --CIEIVED CITY OF TUKWILA OCT 12 2016 PERMIT CENTER I�IIIII� ISSUE DATE � 09/22/16 I r \ PLAN CHECK', 09/28/16 ALL COMMENTS T 1:13 m00 N r at: CD T o � ,n to 6 C Co r �M> =mo�� mCD(7au. N C C (D I) C C U ■ C C N IQ_ C O .a These drawingstspecifications are the property of Kamus + Keller. They are furnished as contract documents only. The seal(s) and signature(s) appy only to the documents to which they affixed, and expressly dispiaim any responsibility for all other plans, specifications, estimates, reports or other documents or instruments relating to or intended to be used for any part or parts of the architectural or engineering project. Additionally these drawings and seal(s) shall in no way convey or Imply any time of warranty or certification relating to the performance of products and materials beyond those provided by their respective manufacturer. PROJECT NO. 16.0430.01 DRAWN/REVIEWED GFIBB DATE/ISSUE 09.07.2016 SHEET TITLE MECHANICAL PLAN SHEET NO. M2.0 N a J J 0 00 Q WP W <C W = W 0 _ [- 111- O Q0Ofn W These drawingstspecifications are the property of Kamus + Keller. They are furnished as contract documents only. The seal(s) and signature(s) appy only to the documents to which they affixed, and expressly dispiaim any responsibility for all other plans, specifications, estimates, reports or other documents or instruments relating to or intended to be used for any part or parts of the architectural or engineering project. Additionally these drawings and seal(s) shall in no way convey or Imply any time of warranty or certification relating to the performance of products and materials beyond those provided by their respective manufacturer. PROJECT NO. 16.0430.01 DRAWN/REVIEWED GFIBB DATE/ISSUE 09.07.2016 SHEET TITLE MECHANICAL PLAN SHEET NO. M2.0 N a EXISTING CONDENSER UNIT SCHEDULE MARK MANUFACTURER MODEL # EER TOTAL COOLING SENS. COOLING HEATING VOLT/PHASE MCA MOCP WEIGHT SALES AREA CONDENSATE DRAIN SEEM RATE-: PEPRAIT 26 7.5 0.12 1674 CAPACITY CAPACITY CAPACITY 400 STOCK ROOMS GREENHECK 0 10 0.12 423 0 50.76 50.76 60 MINIMUM FRESH AIR CFM REQUIRED PER CODE 2. VIBRATION ISOLATION SUPPORT HANGERS 446.64 TOTAL O.A. 460 ZONE AIR DISTRIBUTION EFFECTIVENESS (TABLE 403.3.1.2) =0.8 = NOTES TOTAL O.A. PROVIDED ELECTRIC DUCT HEATER 580 RESTROOMS 70 CFM /FIXTURE #FIXTURES= 1 75 REQ'D CFM EXHAUST CFM EXHAUST 75 PROVIDED NOTES: REPRESENTS CONDITIONS DURING NORMAL OPERATIONS AND NOT CONSIDERING ECONOMIZER OPERATION. OMNI 24X24 SUPPLY GRILLE SEE PLAN - T.G.C. TO VERIFY ALL CU -1 YORK EF4D048 - - - - 208/1/60 33.1 40 EXIST GPM INFORMATION ON EXISTING TITUS OMNI 24X24 SUPPLY GRILLE SEE PLAN (OPEN CEILING) R1 HW I 18" LONG ORANGE MARKER TAPE ATTACHED BRANCH DUCT RECTANGULAR DUCT BREAK/CONTINUATION TITUS PAR 24x24 RETURN GRILLE UNITS PRIOR TO PERFORATED GRILLE LAVATORY DDUCT TRANSITION LL LANDLORD # x # DUCT DIMENSIONS - WIDTH x HEIGHT LAY-IN OR DUCT MTD. NOTE: 1. ALL GRILLES IN GYP BOARD CEILING SHALL BE ORDERED WITH BALANCING DAMPERS 2. PROVIDE HURRICANE TABS CU -2 CARRIER 38YC6048 - - - - 208/3/60 - 25 EXIST �Q CONSTRUCTION. OA OUTSIDE AIR CHECK VALVE RA RETURN AIR �Q 2 -WAY CONTROL VALVE RTU ROOF TOP UNIT ( 3 -WAY CONTROL VALVE -PROVIDE ALTERNATE BID SUPPLY AIR RN copy FOR REPLACING UNITS WITH EXISTING AIR HANDLER UNIT SCHEDULE NEW. MARK MANUFACTURER MODEL # CFM O/A H.P. HLT WEIGHT VOLT/PHASE MCA MOCP OI PIPE TURN UP T_STAT " THERMOSTAT of$pPr$� Field CQ$nd conditions I3 $CU2QVT0 n^ . CI PIPE TURN DOWN TYP EA O ❑ FLOOR DRAIN UH UNIT HEATER t--SS--j SANITARY SEWER LINE AHU-1 CARRIER FY4ANB042 1400 240 1/2 - EXIST 208/1/60 - 20 VENT LINE WC AHU-2 - FB4AN048 2000 340 - - EXIST 208/1/60 - 40 WH VENTILATION REQUIREMENT CALCULATION PER I MC TABLE 403.3 ROOM NAME UNITSERVICING PEOPLE CFM/PERSON CFM/SF AREA (SF) PEOPLE X CFM/PERSON SF X CFM/SF REQUIRED O.A. CFM PROVIDED O.A. CFM SALES AREA CONDENSATE DRAIN SEEM RATE-: PEPRAIT 26 7.5 0.12 1674 195 200.88 395.88 400 STOCK ROOMS GREENHECK 0 10 0.12 423 0 50.76 50.76 60 MINIMUM FRESH AIR CFM REQUIRED PER CODE 2. VIBRATION ISOLATION SUPPORT HANGERS 446.64 TOTAL O.A. 460 ZONE AIR DISTRIBUTION EFFECTIVENESS (TABLE 403.3.1.2) =0.8 = 575 TOTAL O.A. PROVIDED ELECTRIC DUCT HEATER 580 RESTROOMS 70 CFM /FIXTURE #FIXTURES= 1 75 REQ'D CFM EXHAUST CFM EXHAUST 75 PROVIDED NOTES: REPRESENTS CONDITIONS DURING NORMAL OPERATIONS AND NOT CONSIDERING ECONOMIZER OPERATION. L0,JECHANICAL NOTES 'I ALL WORK AND NIATET31AL SH&LL BE iN AGCOiC ANCE WITH LANDLORD'S TENANT DESIGN AND LECHNiCAL CRITERIA AND GENTER'S RUI:ES AND REGULATIONS. ALL CONTRACT(7r1S SHAD_ ORTAIf~ A COPY FROM LANDLORDS TENANT'Ct5 ,sRDINATOR On MALL FACILITES MANAGIZ SAND ACCOMC- FAMILIAR WITH THE R€QUiRrMENTS CONTAINED WITHIN PRIOR TO START OF JQB. WHCFIE LANDLORD'S REQUIREMENTS CONFL Cr ti"/ITFI CODES OR ORDINANCES, THE STRICTEST INTERPRE=TATION SHALL APPLY. 2.'; ERIFY ANY DEMOLITION WORK ANIS ANY NEW WORK REOUIRED BY THE LANDLORD THAT 3S NOT SHOWN (7N PLANSt WITH LANDLORD PRIOR TO 8-10, ,AND DEVICES. SPRINKLER PIPING DUCnVORK, PLU11 B NG, COWAU KATION SYSTEM WIRING, ETC_ DURING DEre OLIT ION AND PEW CONSTRUGTI(?N WITH LANDLORD AND TENANT ARCHITECT PRIOH TO 131D AND 5"TANT OF WORK 4.004.w 1AY 3E REQUIRED TO COVER REITURN AIR OPENINGS PROR TOS rART OF RS AND`(DR NEVj CONSTRUCTION. VERIFY V ITH L iNOLORDPROOR7t35TARTOF131DAVORK. 5.'+1HE.RE ARE 3 TYPES OF I4o1EGHANICAL SYST 4S IN TILE GELATE -R. EACH OF THE 3 SYSTEM TYPES AND THEIR UTILIZATION kVITHIH THE MALL ARE €0ENTIFif-D ON THE H00 ZONJING PLANS AS INDICATED IRI THE LANDLORO-S D17SIGN AND TECHNICAL CRITERIA. TYPE A - A CENTRAL SUPPLY SYSTEM Wi1ERE LANDLOPD SUPT^LIES CONDITIONED AIR TO EACH TENANT SPACE AND EXHAUSrAIFT TO EACIa TOIANT SPACE LOCATED WITHIN THE MALL, VIA THE LANDLORD SUPPLIED ROOFTOP IJf ffsAN40 EXHAUST FANs. TYPE 8 - A SPLIT SYSTEM DESIuri. LANDLORD SUPPLIES Ut3CONDiT1(],IEt3 OUTSIDE AIR AND EXHAUST AIR TO ALL TENA14'T SPACES LOCATED IN THIS ZONE ATEA THE LANDLORD PROVIDED SUPPLY FANS Ah;D EXITAUST FANS LOCATED ON THE ROOF �=r • I EMENI TY-1'EhIIiNT SUPPLIED H001"TOP UNITS r1Iv,D EXHAUST FANS '!Jf flrFit CHET.. JaaNT PROVIDES ALL ELL . � 1 S �� G A . �aC iw V i� A' S'F1 Iv C3F l"HE V ''.TF A! MECHANICAL INSTALLATION IS TO BE COUPLETED FUER ALL GOVERNING CODES AND ALL'tAtATERIALS � _N ITS SI1A<LBE NEW AND OF COMMERCIAL CRACA,AND DARE RGJNDERJRITrTSLAOEL(S), 9VFC C SUCH LAI.:Iha APPLIES. INSTALLATION SHALL BE PERFORIMED BY A LICENSED NIECHANICAL CONTRACTOR, IN A FIRS3-CLASS. W,O14KNAAN-LIKE MANNER. 7.TFN ANT ,HAL Pl y' I H.SK?9 t.[.TF DATA Ih_f1CA7.t.�s 5 SFF1 9 f-A t A �F_ t TH!:. DERA$F0 PRF 1hI5-)E$ AND A, CERTIFIED TIII JP RTYQ LA GFTCPORTCO Rf.URC TIId THIRTY t30) DAYS AFTER GPrhlfG, T}LTEhAAT SHA LL PERFORM BALANCING OF TALL DUCT SYSTEI'S BELATED TO ?HF. PREMISES BY USE OF A LANDLORD APPROVED, INDEPENDENT AIR BALANCE CONTRACTOR NOT AFFILIATED >,;t'iTH TENANT "S MECHANICAL CONTRACTOR, 8ALANGING MUST BE COMPLETED AND AN AIR BALANCE REPOCIT MUST BE SUBMITTED TO AND ACCEPTED BY LANDLORD PRIOR TO T,14E STORE OPENiNG FOR BUSINESS: REPORT SMALL APPLY TO ALL HVAC EQUIPMENT, INCLUDING VAV BOX AIRFLOW SENSOR DIFF11REUTIALPRESSURE READINGS AT MAXiflfUM AND hIII'Ji`rlUM COOLING tFO 'TENANTS IN AREA Ah AND TOILET T EXHAUST HEADINGS t A rT.THE ROOFtiVlwR'r}#E: A9AJCjF11TY Cf THF MALL EL COMPOSED (3i= MG rAL t7ECtEr:G WITH FOAM [INSULATION, irk' 017NSOC-C€c AHD a PLY ASPHALT R00r FELTS; SI GE IT LiNr's OF FOMPI/CHIT NEED TO RG OONSIDFAE7D VJIIFN LOCATING UEPNIENT ON THE ROOF f IAN; ROOF. ACCESS TO THE MALL ROOF IS RE=STRICTE'D TO LANDLORD h r� ECt E:�13;.N1' CONTRACTOR ORQN RACTORSCNLY 1� }1O T PERSONNEL AND LANDLORDS DESIGNATED T C T SUB -CONTRACTOR SHALL BE PERMITTED 0,N THE ROOF UNLESS PEAMISSION HAS BEEN OBTAiNEID FROII TENANT COORDINATOR OR FACILITIES MA1dACiER. 8.T}w BUILDING'S STEEL STRUCTURE IS COVERED iIT€f RE PROOFING SPRAY 4"THICK ON BEAMS AND THICK OtN COLUMNS. ALL STEEL SLIPP tar ITS nEOUIRED BY TENANT TO BE ATTACHED TO THE STEEL STRUCTUR€ SHILL BE CL1F'r EO, NOTWEeLDEV. TENANT SHALL RETURN ALL FIRE PROOFING WITHIN THE PSEMISES TO THE SPECIFIED THICVNESS, l tO.AiIR HANDLING UNITS, VEATNG COUIPMENT, WATER HEATERS AND LITIIC � EQt}<hF iC}7? LOC�+TED LrJ1TE31E1 T4EE DEMISEDPREMISES ISES SLIAI_L BE FLOG ,MOUN ITED OR LOCATED OVER THE TOILET OR STORAGE AREAS ON SUPPORTS PROVIDED BY TENANT, NOT TO EXCEED € AXIMUM LIME LOAD. EXHAUST FAN SCHEDULE MARK SYMBOL MANUFACTURER CATALOG NUMBER LOCATION CFM HP VOLT FAN RPM NOTE SIDEWALL SUPPLY GRILLE AS SPECIFIED CD CONDENSATE DRAIN SEEM RATE-: PEPRAIT -Ar--)FLOW ARROW SQUARE PLAQUE S1® REQUIRED FOR: FOR: DESIRED, TENANT ;SHALL CONTACT L.ANIQLORD`S TENANT COORDINATOR TO REVIEW THE SERVICE CONNECTION TURNING VANES EF -1 ® GREENHECK SP -B110 CEILING 75 1/4 120 1000 1 1. BACKDRAFT DAMPER DRINKING FOUNTAIN 2. VIBRATION ISOLATION SUPPORT HANGERS GYP.BD. CEILING 3. ROOF CURB DIA 4. ADJUSTABLE T -STAT SET AT 85- F (IN PLENUM AND ACCESSIBLE FROM BELOW) 5. BIRD SCREEN EDH AIR DEVICE SCHEDULE MARK SYMBOL MANUFACTURER CATALOG NUMBER FIXTURE DESCRIPTION NECK SIZE REMARKS AHU AIR HANDLER UNIT �- SIDEWALL SUPPLY GRILLE AS SPECIFIED CD CONDENSATE DRAIN SEEM RATE-: PEPRAIT -Ar--)FLOW ARROW SQUARE PLAQUE S1® REQUIRED FOR: FOR: DESIRED, TENANT ;SHALL CONTACT L.ANIQLORD`S TENANT COORDINATOR TO REVIEW THE SERVICE CONNECTION TURNING VANES TITUS OMNI 24x24 SUPPLY GRILLE SEE PLAN EXHAUST DUCT THROUGH ROOF CW COLD WATER Plumbing as ftim VOLUME DAMPER DF DRINKING FOUNTAIN City of Tukwila GYP.BD. CEILING MOTORIZED DAMPER DIA NG DIVISION DIAMETER t -J FD FIRE DAMPER EDH ELECTRIC DUCT HEATER O SQUARE PLAQUE S2® EXHAUST FAN �•- ELECTRIC DUCT HEATER TITUS OMNI 24X24 SUPPLY GRILLE SEE PLAN LAY -IN (ACOUSTIC CEILING) FLOOR CLEAN OUT O DUCT MOUNTED SMOKE DETECTOR FD FLOOR DRAIN row ® REMOTE ALARM FOR DUCT DETECTOR ACTIVATION FLA DUCT MOUNTED S3® EXHAUST FAN GPM w1tnOt;t nripr approval - IDON* GALLONS / MINUTE TUk1VI!a Buil Pn of r T TITUS OMNI 24X24 SUPPLY GRILLE SEE PLAN (OPEN CEILING) R1 HW I 18" LONG ORANGE MARKER TAPE ATTACHED BRANCH DUCT RECTANGULAR DUCT BREAK/CONTINUATION TITUS PAR 24x24 RETURN GRILLE SEE PLAN PERFORATED GRILLE LAVATORY DDUCT TRANSITION LL LANDLORD # x # DUCT DIMENSIONS - WIDTH x HEIGHT LAY-IN OR DUCT MTD. NOTE: 1. ALL GRILLES IN GYP BOARD CEILING SHALL BE ORDERED WITH BALANCING DAMPERS 2. PROVIDE HURRICANE TABS 1 i .NOISE rA ND V113RATION THAT MAY BE CAUSED BY THE OPERATION OF ANY HVAC EQUIPMENT MUST BE CONTROLLED I'TH VIE3RAI-1014 ISOLATORS, RESILIENT MOUNTING DETAILS, FLEXIBLE DUCT CO ENECTIrr NS, DUCT LININGS AND OTHER MEASURES THAT MAY BE REQUIRED. EQUIPMENT THAT iS MOUNTED TO THE BANE E3UiLDING STRUCTURE MUST RE INSTALLED SO THAT NO NOTICEABLE VIBRATION IS TRANSFERRED TO THE BASE BUILDING, STRUCTURE. TENANT IS RESPONSIBLE FOR ISOLATION OF ALL EQUIPf-AENT s0 THAT VI RATIONS AND NOiSES ARE NOT TRANSMITTED. ANY NOISES DEEMED OBJECTIONABLE BY LANDLORD'S SfTE ITEPRESENTATIVE SHALL BE CORRECTED AT TENANT -S EXPENSE. I Z HVAC SYSTEM SHALL BE iN OPERATION WHENEVER LANDLORD PROVIDED HVAC SERVICES ARE OPERATING. TENANTS ARE RECIVIRED TO INSTALL A ,SEVE;OAY TIME CLOCK CIOC FOR CONTROLLING TIC€ HVAC SY T.'.-, h_r'I AN D BI _ CONNECTED TO THE :-IRE,/SMOKE ALARM SYSTEM. 13.TENANT'S AIR-CONDITIONING SYSTEN4 SHALL DE PROVIDED WITH ALL NECESSARY CONTROLS AND DEVICES AND BE =41PATIBLE WITH THE ENCLOSED SHOPPING CENTER AIR-CCiNDITIONINd SYSTEM AND FIRE ALARM S YST EM - t LCyk f VC)LTAGC CONTROLSSHALL BE IN CONDUIT: 14.TENANTS THAT HAVE ODOR -PRODUCING OPERATIONS SHALL INSTALL A FORCED DRAFT VENTILATION SYSTEM 'TO MAINTAIN A NEGATIVE tPI ESSURE 1VI"I'HIN THE TENANT SPACE AND DISCHARGE INTO THE ATMOSPHERE VIA THE ROOF AREA. 7ENr*T }S RrS I LE FOR PROPER DIFFUSI Nl�� Tl:E EXIAUSTIA SUCH A ANhE AS TO PRFVENT ODORS FROM ENTERING AIR INTAKE`; OF OTHER VENTILATION SYSTEMS. 15.00cDLNSAT E LC•ES FOR REFRIGERATION ANDCR AIR•COvDITICINftG SHALL BE COPPER PIPES.. SUCH PIPE SHALL TERMINATE BACK INTO TENANT'S SPACE AND BE CONNECTED ABOVE THE P=TRAP OF THE SINK IN ACGC)Fii7At^ICE WITH THE E1EQU€IEt,+}Et4TS C7I= LOCAL AUTI10RI74ES AND LANDLORD.- OR TENANT SHALL INSTALL (IN ACCORDANCE 1rJIT1-I ALL GOVERN}N><s. C013E5) ANY CCaNiilNSATE 'DRAINS FROM AIR -HANDLING, L114iT5 TO LANDLORD'S &hCLCRD� SEWER } NE _ IB.TF_NAC3T ISNOT PEAMi ED TO USE A WATEEII-COQLINO TOWER. On ANY EVAPOA IVE COOLING APP ARATUS. 17 AE DISTRIBUTION DEVICES SHALL BE CEILING OR SIDE WA LL MOUNT ED REGISTERS OR DIFFUSERS INSTALLED AS REQUIRED TO"ACHIEVE DRAFT -FREE AIR DIST RIEUFtON IN ACCORDANCE WITH GOOD ENGINEERING PRACTICES, A MANUAL VOLUME 'DAMPER SHALL RE INSTALLED UP5TREMA jM11'}IMUM 3 FEET) OF REGRISTERS OR DIFFUSERS IN ALL SALES AREAS. T3HAN'CER-1l�=S,iUC�-SaiAFS, FASTENING ,DEVICES. ET..SMALL 8_ FASTENED TO JOISTS PD;0R 3EAr9 S ABOVE AND CONFORM TO THE MECHANICAL CODE OF THE STATE OF CALIFORNIA. >D0 NOT ATTACH ANYTHING 0 Pi NI I} 1 SUPPORT BUILDING Y T I-I-PPFt;-L "`L A H ROOF F K AND FUR I -I E 9 �I C SUP PII313 L: G t)E. IOIRI=OTt, C� T I� LI ��It"�I. R OR E O f ! � 8 t� T E CODE. I13_TENANT; AT TENAN-1 S EXPENSE, SHALL ENCLOSE ANY REQUIRED DUCT SHAFT'S LOCATED OUTSIDE THE TENANTS SPACE WITH A Tt^+O- (2) HOUR ItiFiE-FiATCD PARTITION. LANDLORD SHALL APPROVEAND DESIGNATE THE LCCATiONS OF ANY TENANT-REQVIfiED DUCT SHAFT LOCATE[) OUTSIDE THE OEMII`ED PREWSESr 20,HVAC DUCT -TYPE SMOKE DETECTOR; SHALL BE INSTALLED AS REQUIRED BY CODE IN EVERY HEATING AND COOLING SY STEP.# UPSTREAM OF ANY OUTSIDE AIR INTAKE, FILTERS, OR DECONTAMINATION EQUIPMENT, WHICH, I.3F'ON ACTIVATION WILL AUTOr. ATiCALLiY SHLI►THE SYSTEM DOWN (PER APPLICABLE CODES , 21.ALL EQUIPMENT ON ROOF SHALL BE LABELED WITH WE,ATHr-RPRoor- ;IGNAGE INDICATING TENANT NAME AND SPACE NUnASER, 23.THE TENANT IS RESPONSIBLE FOR PROVIDING THEIR OWN GREASE EmAUST UNITS S) AND ALL NECESSARY DUCT WORK IN ACCORDANCE WIT -I THI< GUFIRENT Nr PA =E36, CALIFORNIA BUILDING CODI=, AND ALL LOCAL JURISDICT11ONS HAVING AU1`HORTrY_ 2 FLANGED AND GASKETED JOINT OR DUCT CONNECTION AND RE- INFORCEMENT IN ACCORDANCE WITH SMACNA 2" W.G. CLASS, SEAL NON-GASKE ED TRANS- VERSE JOINTS IN ACCORDANCE WITH SMACNA CLASS "C" (TYP.) MECHANICAL SYMBOLS LEGEND ABBREVIATIONS ® SUPPLY GRILLE AS SPECIFIED A.F.F. ABOVE FINISHED FLOOR 2" WIDE MIN. DUCT STRAP 48" O.C. MAX. RETURN GRILLE AS SPECIFIED AHU AIR HANDLER UNIT �- SIDEWALL SUPPLY GRILLE AS SPECIFIED CD CONDENSATE DRAIN SEEM RATE-: PEPRAIT -Ar--)FLOW ARROW CFM AIR VOLUME - CUBIC FEET/ MiNUTE REQUIRED FOR: FOR: DESIRED, TENANT ;SHALL CONTACT L.ANIQLORD`S TENANT COORDINATOR TO REVIEW THE SERVICE CONNECTION TURNING VANES CU CONDENSING UNIT.@ Li dr ElecWcal I OQATIQN AND PIPE ROUTING REQUIREMENTS ENTS SEFORE� BEQINNINO DESIGN Wt)13K. 25 -FLOOR PLAN AND,10R REFLECTED CEILING PLANT MUST 88 AT F�1INII1.RE, M CINE-81GHT SCALE S/$ SCALE OR' ( np EXHAUST DUCT THROUGH ROOF CW COLD WATER Plumbing as ftim VOLUME DAMPER DF DRINKING FOUNTAIN City of Tukwila J MD MOTORIZED DAMPER DIA NG DIVISION DIAMETER t -J FD FIRE DAMPER EDH ELECTRIC DUCT HEATER O THERMOSTAT EF EXHAUST FAN �•- ELECTRIC DUCT HEATER ESP EXTERNAL STATIC PRESSURE T_ PUMP FCO FLOOR CLEAN OUT O DUCT MOUNTED SMOKE DETECTOR FD FLOOR DRAIN row ® REMOTE ALARM FOR DUCT DETECTOR ACTIVATION FLA FULL LOAD AMPSNO changes ShS ®"fort EXHAUST FAN GPM w1tnOt;t nripr approval - IDON* GALLONS / MINUTE TUk1VI!a Buil Pn of r T © REMOTE TEMPERATURE SENSOR HP Vjill require a nmv Plan submittal HORSEPOWER and may Include additional plan raviAlAt h%.. HOT WATER /a MOTOR HW I 18" LONG ORANGE MARKER TAPE ATTACHED BRANCH DUCT RECTANGULAR DUCT BREAK/CONTINUATION IWH INSTANTANEOUS WATER HEATER ROUND DUCT BREAK/CONTINUATION LAV LAVATORY DDUCT TRANSITION LL LANDLORD # x # DUCT DIMENSIONS - WIDTH x HEIGHT MCA MINIMUM CIRCUITAMPACiTY lu�-CFM GRILLE TYPE } SUPPLY/RETURN GRILLE TAG MD MOTORIZED DAMPER MOCP MAXIMUM OVERCURRENT PROTECTION PLUMBING SYMBOLS LEGEND N.I.C. NOT IN CONTRACT pQ BALL VALVE NTS NOT TO SCALE �Q GATE VALVE OA OUTSIDE AIR CHECK VALVE RA RETURN AIR �Q 2 -WAY CONTROL VALVE RTU ROOF TOP UNIT ( 3 -WAY CONTROL VALVE SA SUPPLY AIR RN copy I PIPE UNION SS SANITARY SEWER Permit ft, _6--aal 0- DIRECTION OF FLOW ARROW TEN TENANT Plan MV16w approval IsSubject to errors and Oa•r • Ons [ END CAP T.G.C. APPrOval Q C0 ns r ( LIC` X10 nd documents does TENANT GENERAL COh}F&CT R . not $Ilt�l01Z4 11 Y10 �$ tion of any afted Mdn or ordinanGe. r OI PIPE TURN UP T_STAT " THERMOSTAT of$pPr$� Field CQ$nd conditions I3 $CU2QVT0 n^ . CI PIPE TURN DOWN TYP TYPICAL BY., O ❑ FLOOR DRAIN UH UNIT HEATER t--SS--j SANITARY SEWER LINE U.N.O. UNLESS NOTED OTHERWISE MIMING Z -- WATE COLD R LINE VD VOLUME DAMPER ---I HOT WATER LINE V.I.F. VERIFY IN FIELD ----- r VENT LINE WC WATER CLOSET 1-<EVIEVVED FOR CODE COMPLIANCE t -G -t GAS LINE WCO WALL CLEAN OUT PFIKOVED O TANK TYPE WATER HEATER WH TANK TYPE WATER HEATER 't All NOTE: NOT ALL SYMBOLS OR ABBREVIATIONS MAY APPEAR ON PLANS. CRY of Tukwila BUILDING IDIVISI ISSUE DATE 09/22/16 A PLAN CHECK 09/28/16 LL COMMENTS C3 t(o cm r` .2 es v)a. XN T d`* TOP O ~ T CLC)a;rN mco agi >cun LQOco Lo m � �i''� �cnC9o.0 ami 0) C fU in C O U 0 C C (D CL C O 30 J J IREI.r t IO 23 -ALL ROOFTOP EQUIPMENT LOCATIONS MUST HAVE PRIOR WRITTN APPROVAL FROM THE LANDLORD. ALL 2" WIDE MIN. DUCT STRAP 48" O.C. MAX. 00 AIR ROOF�MOILJNTED KITCHEN EXHAUST FANS THATHANDLE A GREASE DISCHARGE. SHALL HAVE A GREASE CATCH PAN AND GLITTER. 00 MAIN DUCT FLOW 21.NATURAL GAS SERVICE IS AVAILABLE FOR FOOD.COURT AND RESTAURANT TENANTS ONLY. IF GPS SERVICE IS w W z DESIRED, TENANT ;SHALL CONTACT L.ANIQLORD`S TENANT COORDINATOR TO REVIEW THE SERVICE CONNECTION WI RIGID ROUND METAL ED EXTERNALLY INSULATED LI ACOUSTICAL LINING �\ I OQATIQN AND PIPE ROUTING REQUIREMENTS ENTS SEFORE� BEQINNINO DESIGN Wt)13K. 25 -FLOOR PLAN AND,10R REFLECTED CEILING PLANT MUST 88 AT F�1INII1.RE, M CINE-81GHT SCALE S/$ SCALE OR' ( np Z W U = W W i)UI- .1 r _________________________T______________r---------------------- LAISGEFL AND SHALL INCLUDE ALL DUCTWORIIC. EXHAUST SYsTEms, HOODS. PIPING AN F_OUIPM =NT Q RIGID ROUND DUCT ELBO Q I 26.SCHEMATIC DIAGRAM OF THE HVAC SYSTEM CONTROLS, INCLUDING ALL FIREISM6KE DETECTION AND ALARI•.A: Q EXTERNALLY INSULATED r -- 45 DEVICES WITH ALL MANUFACTURES'MODEL NUMBERS MUST BE INDICATED., C) 27..DRAWINGS MUST CONTAIN EQUIPMENT SCHEDULES, iNCLUDINC AIR -HANDLING UNITS, CONDENSING UNITS, T_ ALL DUCT LINER TRANSVERSE i ROOF UNITS, EXHAUST FANS, AIR DEVICES (DIFFUSERS, REGISTERS AND GRILLES) AND ANY OTHER EQUIPMENT INSULATED FLEXIBLE DUCT MAX. LENGTH � EDGES TO BE COATED WITH VOLUME DAMPER LOCATION WHERE ABOVE i I LAY -IN CEILING. PROVIDE WITH LOCKING ADHESIVE IN ACCORDANCE I t s USED, INCLUDING MANUFACTURERS' NAME AND NUMBER. 28.Ti^NANT SPACE BELOW. VERIFY APPROVED PENETRATION I.00I�TIe}�CS AND FOLLOWING LAN[}Lt�RIO METAL SUPPLY DUCT EXTERNALLY INSULATED WiTH SMACNA STANDARDS I ---- I QUADRANT (TYP.) ---- t REQUIREMENTS WITH LANDLORD ANIS TENANT'S ARCHITECT- - RADARISGRAFVX-RAY TESTING, FIREPROOFING AND -SEALING, ETC, MAY BE REQUIRED TO /ISS LANQWRD'.S OR LANDLORD APPROVED CONTRACTORS. ALL =RK SHALL RECEIVED Tit OF TUKWILA VOLUME DAMPER (FOR I BE AT TENANT'S EXPENSE. ALL PROPOSED, LOCATIONS AND,'OR PENETRATIONS SMALL MATCH LOCATIONS AS FINAL BALANCEI I 18" LONG ORANGE MARKER TAPE ATTACHED BRANCH DUCT INDICATED ON'THE LANDLORD -APPROVED PLANS AND RE APPROVED AY LANDLofto`S STN -,SITS RF_P IF_ F_NTATIV OCT 12 2016 ADJUSTMENT) i I TO DAMPER TO IDENTIFY LOCATION 23.VERIFY LANDLORD APPROVEDMETHODS FOR ATTACHING TO BUILbiNc- S°TRUCT11FIE WHEN 4AANGING.!SUI POFITING. HVAC EQUIPMENT, DUCTIV(ORK PIPING. WATER HEATERS, TRANSF ORIVIEF1S, FIXTUnEs. DIFFUSER TRIM FRAM DIFFUSER CEILING CONDUIT, ETC. WITH LANDLORD AND TENANT'S ARCHITECT, ATTAaCI ING TO UPPER LEVEL FLOOR SLAB OR ROOF. ERMIT CENTER DECK IS NOT ALLOWED, GONDUIT HANGERS, CLAMPS, EIGHT FIXTURE SUPPORTS, ETC. SHALL K FASTENED TO BAR JOISTS OR BEAMS. CONNECTIONCTAKE-OFF DETAIL ICONTINiJED ON NEXT PAGE) , SCALE: NTS SCALE: NTS ME am M wm -is Mon ISSUE DATE 09/22/16 A PLAN CHECK 09/28/16 LL COMMENTS C3 t(o cm r` .2 es v)a. XN T d`* TOP O ~ T CLC)a;rN mco agi >cun LQOco Lo m � �i''� �cnC9o.0 ami 0) C fU in C O U 0 C C (D CL C O 30 These drawings/spectfications are the property of Kamus + Keller. They are fumished as contract documents only. The seal(s) and signature(s) appy only to the documents to which they affixed, and expressly displaim any responsibility for alt other plans, specifications, estimates, reports or other documents or instruments relating to or intended to be used for any part or parts of the architectural or engineering project. Additionally these drawings and seal(s) shall in no way convey or imply any time of warranty or certification retaUng to the performance of products and materials beyond those provided by their respective manufacturer. PROJECT NO. 16.0430.01 DRAWN/REVIEWED GF1BB DATE/iSSUE 09.07.2016 SHEET TITLE ECH SCHEDULE LEGEND & DETAILS SHEET NO. TVI 1 .O T_ N J J W.i J < 00 OQ c C 00 �y 1.l. W w W z Q WI -W�: J Q Z W U = W W i)UI- .1 I- O Q 06 Q (nW rn E✓J Q w r -- C) T_ These drawings/spectfications are the property of Kamus + Keller. They are fumished as contract documents only. The seal(s) and signature(s) appy only to the documents to which they affixed, and expressly displaim any responsibility for alt other plans, specifications, estimates, reports or other documents or instruments relating to or intended to be used for any part or parts of the architectural or engineering project. Additionally these drawings and seal(s) shall in no way convey or imply any time of warranty or certification retaUng to the performance of products and materials beyond those provided by their respective manufacturer. PROJECT NO. 16.0430.01 DRAWN/REVIEWED GF1BB DATE/iSSUE 09.07.2016 SHEET TITLE ECH SCHEDULE LEGEND & DETAILS SHEET NO. TVI 1 .O T_ N DIVISION 15010 - GENERAL REQUIREMENTS 1.0 GENERAL 1_1 SPECIFICATIONS ARE APPLICABLE TO ALL CONTRACTORS AND/OR SUBCONTRACTORS FOR MECHANICAL SYSTEMS. DIVISION 15050 - BASIC MATERIALS AND METHODS 1.0 GENERAL 1_1 PROVIDE ALL MATERIALS, LABOR, EQUIPMENT, AND ACCESSORIES REQUIRED TO FURNISH AND INSTALL THE MECHANICAL ITEMS IDENTIFIED IN THIS SECTION. 1_2 CHECK OTHER PLANS AND SPECIFICATIONS AND FULLY COORDINATE WITH OTHER TRADES, OWNER 1.2 AND ARCHITECT REQUIREMENTS. 1_3 CONFORM TO ALL GENERAL AND SPECIAL CONDITIONS OF CONTRACTS SPECIFIED BY ARCHITECT AND/OR OWNER. 1_4 VISIT SITE, CHECK FACILITIES AND CONDITIONS AND MAKE ALL NECESSARY OBSERVATIONS AND MEASUREMENTS. NOTE CONDITIONS UNDER WHICH WORK IS TO BE PERFORMED AND TAKE ALL ITEMS INTO CONSIDERATION IN BID. 1_5 SYSTEMS ARE TO BE COMPLETE AND WORKABLE IN ALL RESPECTS, PLACED IN OPERATION AND PROPERLY ADJUSTED. 1_6 EACH CONTRACTOR SHALL PROVIDE FOR HIS OWN CLEAN UP, REMOVAL AND LEGAL DISPOSAL OF ALL RUBBISH DAILY. 1_7 CONTRACTOR SHALL PROTECT HIS WORK, THE EXISTING AND ADJACENT PROPERTY AGAINST WEATHER. 1_8 CONTRACTOR SHALL PROTECT HIS WORK, MATERIALS, APPARATUS AND FIXTURES FROM DAMAGE. ANY WORK DAMAGED BY FAILURE TO PROVIDE PROTECTION REQUIRED, SHALL BE REMOVED AND RELEASED WITH NEW MATERIAL AT THE CONTRACTORS EXPENSE. 1.9 CONTRACTOR MUST CONFIRM ALL UTILITY COMPANY REQUIREMENTS AND CONNECTIONS POINTS IN FIELD PRIOR TO STARTING WORK. 1.10 ARRANGE FOR AND OBTAIN OWNER'S AND INSURANCE REPRESENTATIVE'S PERMISSION FOR ANY SERVICE SHUTDOWNS. 1.11 THE CONTRACTOR SHALL BE SOLELY RESPONSIBLE FOR CONSTRUCTION MEANS, METHODS, SEQUENCES OF CONSTRUCTION AND THE SAFETY OF WORKMEN. 1.12 NO PIPING, DUCTWORK, WIRING, ETC. SHALL BE INSTALLED OR ROUTED ABOVE ELECTRICAL PANELS AND EQUIPMENT OR THROUGH ELEVATOR EQUIPMENT ROOMS. 1.13 THE MECHANICAL CONTRACTOR SHALL COORDINATE WITH THE ELECTRICAL CONTRACTOR AND OBTAIN A WRITTEN APPROVAL IDENTIFYING THE ELECTRICAL CHARACTERISTICS OF ALL MECHANICAL EQUIPMENT PRIOR TO ORDERING OF EQUIPMENT. NO ADDITIONAL PAYMENT WILL BE MADE FOR LACK OF CONTRACTOR COORDINATION OF ELECTRICAL CHARACTERISTICS. 1.14 DURING CONSTRUCTION THE CONTRACTOR MAY UNCOVER AN EXISTING CONDITION THAT WILL HAVE TO BE MODIFIED. ANY SUCH WORK WHICH COMES UNDER THE JURISDICTION OF THIS CONTRACTOR SHALL BE DONE BY THE CONTRACTOR WITHOUT EXTRA COST TO THE OWNER, AS THOUGH FULLY DETAILED PLANS AND/OR DESCRIBED IN THE SPECIFICATIONS. 1.15 WORK RELATED TO THE EXISTING BUILDING SHALL BE COORDINATED TO MINIMIZE INTERFERENCE OR INTERRUPTION OF NORMAL BUILDING USE BY OWNER. REFER TO ARCHITECTURAL PLANS FOR PHASING REQUIREMENTS. 2.0 CODES PERMITS STANDARDS AND REGULATIONS 2.1 CONFORM TO APPLICABLE CODES (LOCAL, STATE, NATIONAL CODES, NFPA, OSHA, ETC.) GOVERNMENT REGULATIONS, UTILITY COMPANY REQUIREMENTS, AND APPLICABLE STANDARDS. 2_2 OBTAIN PERMITS AND PAY ALL FEES. ARRANGE FOR ALL REQUIRED INSPECTIONS AND APPROVALS. 3.0 DRAWINGS 3_1 THE SYSTEMS AS SHOWN ON MECHANICAL DRAWINGS ARE DIAGRAMMATIC, CONFORM TO ALL DIMENSIONS BY FIELD MEASUREMENTS 3_2 THE EXACT LOCATIONS FOR FIXTURES, EQUIPMENT AND PIPING WHICH IS NOT COVERED IN BY DRAWINGS. SHALL BE OBTAINED FROM THE ARCHITECT OR HIS REPRESENTATIVE IN THE FIELD AND THE WORK SHALL BE LAID OUT ACCORDINGLY. 3_3 DRAWINGS AND SPECIFICATIONS ARE INTENDED TO SUPPLEMENT ONE ANOTHER. ANY MATERIALS OR LABOR CALLED FOR IN ONE BUT NOT THE OTHER SHALL BE FURNISHED AS IF BOTH WERE MENTIONED IN THE SPECIFICATIONS AND SHOWN ON THE DRAWINGS. 4.0 BASE EQUIPMENT MATERIALS AND SUBSTITUTIONS 4_1 ALL EQUIPMENT AND MATERIALS SHALL BE NEW, FREE OF DEFECTS AND U.L. LABELED. 4_2 BASE BID MANUFACTURERS ARE INCLUDED IN THE SPECIFICATIONS OR LISTED IN SCHEDULES ON THE DRAWINGS. ALL OTHER MANUFACTURERS ARE CONSIDERED A SUBSTITUTION. 4_3 THE NAME OR MAKE OF ANY ARTICLE, DEVICE, MATERIAL, FORM OF CONSTRUCTION, FIXTURE, ETC., STATED IN THIS SPECIFICATION, WHETHER OR NOT THE WORDS "OR APPROVED EQUAL" ARE USED, SHALL BE KNOW AS "STANDARD." 4_4 ALL PROPOSALS SHALL BE BASED ON "STANDARDS" SPECIFIED. 4_5 THE EQUIPMENT SCHEDULES ON THE DRAWINGS INDICATE MANUFACTURERS EQUIPMENT MODEL NUMBERS THAT THIS DESIGN HAS BEEN BASED ON. THE USE OF OTHER MANUFACTURERS EQUIPMENT THAT IS LISTED AS ACCEPTABLE ALTERNATES THAT ENTAILS GENERAL TRADES, STRUCTURAL, MECHANICAL, ELECTRICAL, ETC. REVISIONS ARE THE CONTRACTOR'S RESPONSIBILITY. ANY ADDITIONAL COST OF SUCH CHANGES SHALL BE PAID BY THE CONTRACTOR SUBMITTING THE ACCEPTABLE ALTERNATES WHICH NECESSITATES CHANGES IN INSTALLING SUCH SUBMITTED ALTERNATE EQUIPMENT, EVEN THOUGH SUCH COST MAY BE A PART OF ANOTHER DIVISION OF WORK. 4_6 SUBSTITUTIONS ARE SUBJECT TO THE APPROVAL OF THE OWNER. IF A SUBSTITUTION IS SUBMITTED, IT IS THE CONTRACTORS RESPONSIBILITY TO EVALUATE IT AND CERTIFY THAT THE SUBMISSION IS EQUIVALENT IN ALL RESPECTS TO THE BASE SPECIFICATIONS. 4_7 IF SUBSTITUTIONS ARE APPROVED, NOTIFY ALL OTHER CONTRACTORS, SUBCONTRACTORS, ETC., AFFECTED BY THE SUBSTITUTION AND FULLY COORDINATE WITH THEM. ANY COST RESULTING FROM SUBSTITUTION, WETHER BY THIS CONTRACTOR OR OTHERS, SHALL BE THE RESPONSIBILITY OF AND PAID FOR BY THE SUBSTITUTING CONTRACTOR. APPROVED SHOP DRAWINGS DO NOT ABSOLVE THIS CONTRACTOR FROM HIS RESPONSIBILITY. THIS SECTION INCLUDES BASIC MECHANICAL MATERIALS AND METHODS TO COMPLEMENT OTHER DIVISION 15 SECTIONS IN THIS SPECIFICATION AND REQUIREMENTS INDICATED ON THE MECHANICAL DRAWINGS. 2.0 SUPPORTS AND HANGERS 2_1 HANGERS AND SUPPORTS ARE TO BE PROVIDED TO PROPERLY SUPPORT, SECURE AND ALIGN PIPING AND TO MEET FIELD CONDITIONS AND AS MANUFACTURED BY GRINNELL OR MICHIGAN. 2_2 SPACING TO COMPLY WITH ASHRAE STANDARDS AND LOCAL CODE REQUIREMENTS. 3.0 ESCUTCHEONS 3_1 FIT ALL PIPE PASSING THROUGH WALLS, FLOORS OR CEILINGS IN FINISHED ROOMS WITH STEEL OR BRASS ESCUTCHEONS. WHERE SURFACE IS TO RECEIVE A PAINT FINISH MAKE ESCUTCHEONS PRIME PAINTED; OTHERWISE MAKE ESCUTCHEONS NICKEL OR CHROME PLATED. WHERE PIPING IS INSULATED, FIT ESCUTCHEONS OUTSIDE INSULATION. 4.0 PIPE IDENTIFICATION 4_1 IDENTIFY EACH PIPE, VALVE IN EQUIPMENT ROOMS, ABOVE ACCESSIBLE CEILINGS AND IN ACCESSIBLE SHAFTS. 4_2 COLOR CODE IDENTIFICATION BANDS OR MARKER BACKGROUNDS TO IDENTIFY CONTENTS OF PIPE AND DIRECTION OF FLOW LOCATED NEAR EACH VALVE AND FITTING, ON BOTH SIDES OF PIPE PASSING THROUGH WALLS AND ON LONG RUNS AT NOT OVER 20 FOOT INTERVALS. 5.0 ROOF CURBS 5_1 CURB SHALL BE 18 GAUGE GALVANIZED STEEL WITH CONTINUOUS WELDED SEAMS, WOOD NAILER, COUNTER FLASHING AND INSULATION. TOP OF CURB SHALL BE A MINIMUM OF 12" ABOVE THE FINISHED ROOF SURFACE. 5_2 PROVIDE CURB FOR ALL ROOF PENETRATIONS OF DUCTS AND PIPING. 5_3 ALL CUTTING AND PATCHING OF EXISTING ROOF SHALL BE BY THE OWNER'S ROOFING CONTRACTOR AND PAID FOR BY THE MECHANICAL CONTRACTOR. 6.0 FIRESTOPPING 6_1 ALL ROOF OPENINGS THROUGH FIRE RATED WALLS, FLOORS, AND/ORROOFS FOR DUCTWORK, PIPING, ETC., SHALL BE FIRE SEALED WITH CALCIUM SILICATE, SILICONE "RTV" FOAM, "3M" FIRE RATED SEALANTS, HILTI FIRESTOP SYSTEMS, OR APPROVED EQUAL TO MAINTAIN THE INTENDED FIRE RATING AND ASSOCIATED'UL' RATINGS 7.0 CUTTING, PATCHING AND DRILLING 7_1 ALL CUTTING AND PATCHING OF THE BUILDING CONSTRUCTION REQUIRED FOR THIS WORK SHALL BE BY THIS CONTRACTOR UNLESS SHOWN ON ARCHITECTURAL DRAWINGS AND CONFIRMED AS TO SIZE AND LOCATION PRIOR TO NEW CONSTRUCTION. CUTTING SHALL BE IN A NEAT AND WORKMANLIKE MANNER. 7_2 NEATLY SAW CUT ALL RECTANGULAR OPENINGS, SET SLEEVE THROUGH OPENING, AND FINISH PATCH OR PROVIDE TRIM FLANGE AROUND OPENING. 7_3 NEATLY SAW CUT FLOORS AND PATCH FLOOR TO MATCH EXISTING, INCLUDING FLOOR COVERING. 7_4 CONTRACTOR SHALL FILE VERIFY SLAB -ON -GRADE OR SUPPORTED FLOOR CONSTRUCTION TYPE PRIOR TO CUTTING. UNDER NO CIRCUMSTANCES SHALL THIS CONTRACTOR CUT A STRUCTURAL FLOOR SLAB, WHETHER ON GRADE OR SUPPORTED, WITHOUT PRIOR WRITTEN APPROVAL FROM THE ARCHITECT. IF FLOOR SLAB INDICATED TO BE CUT ON MECHANICAL PLANS IS FOUND TO BE STRUCTURAL IN NATURE, DO NOT CUT. CONTACT ARCHITECT IMMEDIATELY FOR FURTHER DIRECTIONS. 7_5 CORE DRILL AND SLEEVE ALL ROUND OPENINGS. 7_6 DO NOT CUT ANY STRUCTURAL COMPONENTS WITHOUT ARCHITECTS WRITTEN APPROVAL, INCLUDING, BUT NOT LIMITED TO ROOF JOISTS, COLUMNS, FLOOR JOIST, BEAMS, GIRDERS, STRUCTURAL FLOOR SLABS, ETC. 7_7 PATCH AND FINISH TO MATCH ADJACENT AREA THAT HAVE BEEN CUT, DAMAGED OR MODIFIED AS A RESULT OF THE INSTALLATION OF THE MECHANICAL SYSTEMS. FIRE STOP ALL PENETRATIONS OF FIRE RATED CONSTRUCTION IN A CODE APPROVED MANNER. 7_8 ALL CONTRACTORS SHALL CONFIRM WITH OWNER, PRIOR TO BID, TIMES AVAILABLE FOR NOISE PRODUCING WORK SUCH AS CUTTING AND CORE DRILLING OF FLOORS, WALLS, ETC., AS WELL AS TIMES FOR WORK WHICH REQUIRES ACCESS INTO ADJOINING TENANT SPACES, INCLUDE ANY PREMIUM TIME IN BID. 7_9 EXACT LOCATION OF ROOF TOP AIR CONDITIONING UNITS SHALL BE APPROVED BY THE STRUCTURAL ENGINEER, MECHANICAL CONTRACTOR SHALL FURNISH AND INSTALL ALL SUPPLEMENTAL SUPPORT STEEL FOR EQUIPMENT AND ROOF PENETRATIONS AFTER APPROVAL OF STRUCTURAL ENGINEER. 7.10 THE MECHANICAL CONTRACTOR SHALL COORDINATE WITH THE GENERAL CONTRACTOR PRIOR TO CONSTRUCTION. THE MECHANICAL CONTRACTOR SHALL PROVIDE INFORMATION REGARDING OPENINGS IN WALLS, FLOORS, ETC., CONCRETE EQUIPMENT PADS AND FOUNDATIONS TO THE GENERAL CONTRACTOR. IF THE MECHANICAL CONTRACTOR FAILS TO COMPLY WITH THIS REQUEST, OR IF INCORRECT INFORMATION IS GIVEN, THE NECESSARY CUTTING AND PATCHING WILL BE PERFORMED BY THE GENERAL CONTRACTOR, AT THE MECHANICAL CONTRACTOR'S EXPENSE. 8.0 DEMOLITION AND REMOVAL 8_1 DISCONNECT, CAP AND REMOVE ALL PIPING, DUCTWORK AND EQUIPMENT INDICATED ON THE DRAWINGS OR AS REQUIRED FOR THE PROJECT. 8_2 ANY EQUIPMENT DESIGNATED BY OWNER TO BE SALVAGED SHALL BE PROTECTED AND DELIVERED TO THE OWNER ON SITE. 8_3 DEMOLITION SHALL BE DONE INA MANNER SO AS NOT TO DAMAGE ADJACENT WORK AND NOT AFFECT THE OPERATION OF SYSTEMS TO REMAIN IN USE. ANY ITEM TO REMAIN THAT IS DAMAGED BY THE CONTRACTOR SHALL BE REPLACED AND/OR REPAIRED AT THE CONTRACTOR'S EXPENSE. 8_4 ALL OPEN ENDED PIPING AND DUCTWORK THAT IS TO REMAIN SHALL BE CAPPED AND PROPERLY SECURED. 8_5 ALL ELECTRICAL DEVICES, WIRING, CONDUIT, ETC., RELATED TO DEMOLISHED EQUIPMENT/SYSTEMS SHALL BE REMOVED. WIRING SHALL BE DISCONNECTED AT CIRCUIT BREAKERS, REMOVED AND "SPARE" BREAKERS MARKED 8_6 MECHANICAL CONTRACTOR SHALL REMOVE AND RECLAIM ANY REFRIGERANT IN EXISTING SYSTEMS PRIOR TO DEMOLITION OF ANY EQUIPMENT ACCORDING TO FEDERAL REQUIREMENTS. 8_7 ALL ASBESTOS REMOVAL WILL BE HANDLED BY THE OWNER AND IS NOT A PART OF THIS WORK 8_8 EXAMINE AREAS AND CONDITIONS UNDER WHICH DEMOLITION WORK MUST BE PERFORMED. THIS CONTRACTOR SHALL COORDINATE HIS WORK WITH OTHER TRADES PERFORMING DEMOLITION WORK AND/OR DEMOLITION WORK PERFORMED BY THE OWNER. 8_9 REMOVE ALL SUPPORTS, HANGERS, ETC., RELATED TO EQUIPMENT AND MATERIAL INDICATED TO BE DEMOLISHED. 8.10 WHERE TEMPERATURE CONTROLS ARE INDICATED FOR DEMOLITION, RETAIN THE SERVICES OF A TEMPERATURE CONTROL CONTRACTOR TO PERFORM SUCH DEMOLITION. DIVISION 15100 - INSULATION 1.0 GENERAL 1_1 FURNISH ALL MATERIAL, LABOR AND EQUIPMENT AS REQUIRED TO INSTALL COMPLETE PLUMBING AND HVAC INSULATION AS INDICATED ON MECHANICAL DRAWINGS AND IN THESE SPECIFICATIONS. 1_2 INSTALL IN FULL ACCORDANCE WITH MANUFACTURER'S RECOMMENDATIONS. 2.0 PLUMBING INSULATION 2_1 INSULATE ALL ABOVE GRADE HOT AND COLD WATER PIPING WITH MOLDED FIBERGLASS HAVING AN ALL SERVICE JACKET. 2.1a INSULATION THICKNESS SCHEDULE: 2.1a1 LESS THAN 1-1/2" DIAMETER PIPE: 3/4" THICK 2.1a21-12" DIAMETER PIPE: 1"THICK 2_2 INCLUDE INSULATION OF FITTINGS AND VALVES. KEEP VAPOR BARRIERS INTACT. APPLY TO MANUFACTURER'S RECOMMENDATIONS. 2_3 HANDICAPPED LAVATORY INSULATION - INSULATE ALL EXPOSED WASTE AND WATER SUPPLY PIPING UNDER LAVATORY WITH SAFETY COVERS PER ADA REQUIREMENTS AS MANUFACTURED BY PLUMBEREX SPECIALTY PRODUCTS, MCGUIRE OR TRUEBRO. 2_4 REPAIR SECTIONS OF EXISTING PIPING INSULATION DAMAGED OR DAMAGED DURING THIS CONSTRUCTION PERIOD. USE INSULATION OF SAME THICKNESS AS EXISTING INSULATION, INSTALL NEW JACKET LAPPING AND SEALED OVER EXISTING. 3.0 HVAC INSULATION 3.1 INSULATE ALL SUPPLY, RETURN, AND EXHAUST DUCTS WITH 1-1/2" THICK FOIL FACED REINFORCED KRAFT JACKET, FIBERGLASS DUCT WRAP FULLY SECURED TO DUCT. LAP AND TAPE SEAMS AND SECURE TIGHTLY TO THE DUCTS WITH WIRE OR STICK PINS. 3_2 ALL INSULATION TO BE APPLIED IN FULL ACCORDANCE WITH THE MANUFACTURER'S RECOMMENDATIONS AND COMPLY WITH 25/50 FLAME AND SMOKE HAZARD RATINGS PER ASTM E-84, NFPA 255 ABD UL 723. 3_3 INSULATE REFRIGERANT SUCTION LINE WITH 1/2" ELASTOMERIC FOAM INSULATION WITH JOINTS AND SEAMS SEALED VAPOR TIGHT. 3_4 INSULATE AIR CONDITIONING CONDENSATE DRAIN PIPING WITH 1/2" THICK MOLDED FIBERGLASS INSULATION. 3_5 PROVIDE REMOVABLE INSULATION SECTION TO COVER PARTS OF EQUIPMENT WHICH MUST BE OPENED PERIODICALLY FOR MAINTENANCE. INCLUDE METPL VESSEL COVERS, FASTENERS, FLANGES, CHILLED WATER PUMPS, FRAMES AND ACCESSORIES. 3_6 REPAIR DAMAGED SECTIONS OF EXISTING MECHANICAL INSULATION DAMAGED DURING THIS CONSTRUCTION PERIOD. USE INSULATION OF SAME THICKNESS AS EXISTING INSULATION, INSTALL NEW JACKET LAPPING AND SEAL OVER EXISTING. 3_7 REPLACE DAMAGED INSULATION WHICH CANNOT BE REPAIRED SATISFACTORILY, INCLUDING UNITS WITH VAPOR BARRIER DAMAGE AND MOISTURE SATURATED UNITS. DIVISION 15200 - PIPING AND VALVES 1.0 GENERAL 1_1 FURNISH ALL MATERIAL, LABOR, EQUIPMENT AND ACCESSORIES AS REQUIRED TO INSTALL COMPLETE PLUMBING AND HVAC PIPING SYSTEMS AS INDICATED ON MECHANICAL DRAWINGS AND IN THESE SPECIFICATIONS. 1_2 INSTALL IN FULL ACCORDANCE WITH LOCAL CODE REQUIREMENTS, OTHER SPECIFICATION SECTION REQUIREMENTS AND MANUFACTURER'S RECOMMENDATIONS 2.0 CONNECTIONS TO EQUIPMENT FURNISHED BY OTHERS 2_1 PROVIDE VALVED WATER AND/OR GAS CONNECTION FOR EQUIPMENT FURNISHED BY OTHER CONTRACTORS OR OWNER. 2_2 INCLUDE ACCESSORIES REQUIRED BY CODE, DRAWING OR MANUFACTURER'S INSTRUCTIONS. 2_3 FULLY COORDINATE WITH KITCHEN EQUIPMENT AND LAUNDRY SUPPLIERS AND CONFIRM ALL ROUGH -IN REQUIREMENTS PRIOR TO STARTING WORK 3.0 SANITARY AND STORM SEWERS 3_1 INSTALL SANITARY AND STORM SEWERS, STACKS, VENTS, DRAINS, CLEANOUTS, ETC., AS INDICATED ON THE DRAWINGS. 3_2 SEWERS TO BE PITCHED A MINIMUM OF 1/4" PER FOOT FOR 3" SIZES AND UNDER AND 1/8" PER FOOT FOR 4" SIZES AND LARGER OR TO GRADES INDICATED ON PLANS. 3_3 CHANGES IN DIRECTION AND BRANCH CONNECTIONS SHALL BE MADE WITH APPROVED DRAINAGE FITTINGS COMPATIBLE WITH THE PIPING SYSTEM MATERIAL WHICH IS INSTALLED. 3_4 ALL FIXTURES AND SANITARY DRAINS SHALL BE VENTED AS INDICATED ON DRAWINGS AND IN ACCORDANCE WITH CODE. 3_5 VENTS ARE TO BE EXTENDED THROUGH ROOF AS INDICATED ON DRAWINGS AND FLASHED WITH 4 LB. LEAD WITH VENT FLASHING TOP TURNED DOWN TWO (2) INCHES MINIMUM INSIDE PIPE 3_6 PVC PIPING SHALL NOT BE INSTALLED UNLESS PERMITTED BY CODE AND SHALL NOT BE INSTALLED IN RETURN AIR PLENUMS. 3_7 SANITARY AND VENT MATERIAL SHALL BE AS FOLLOWS: 3.7a BELOW GRADE STORM AND SANITARY INSIDE BUILDING. 3.7a1 SERVICE WEIGHT - CAST IRON PIPE ASTM A-74-82 WITH ASTM C-56470 NEOPRENE COMPRESSION JOINTS OR NO HUB WITH CLAMPS. 3.7a2 PVC -DMV PLASTIC ASTM D-1785 WITH ASTM D-2665 DMV SOLVENT WELD SOCKET FITTINGS. 3.7b ABOVE GRADE SANITARY/STORM SEWER AND VENT MATERIAL SHALL BE AS FOLLOWS: 3.7b1 NO -HUB CAST IRON PIPE CISP11-301-78. 3.7b2 SCH. 40 GALVANIZED STEEL PIPE ASTM A-120-83 WITH CAST IRON SCREWED FITTINGS ANSI B-16.221983. 4.0 DOMESTIC WATER PIPING 4_1 INSTALL DOMESTIC WATER PIPING AS INDICATED ON DRAWINGS. INCLUDE ALL FITTINGS, VALVES, HANGERS, AND OTHER ACCESSORIES INCLUDING WATER METER AND BACKFLOW PREVENTER. EXTEND DOMESTIC WATER PIPING TO ALL FIXTURES AND EQUIPMENT REQUIRED FOR COMPLETE INSTALLATION. 411-2 INCLUDE UNIONS, OR OTHER DISCONNECT MEANS, STOPS OR VALVES FOR ISOLATION OF FIXTURES AND EQUIPMENT. VALVES TO BE FULLY COMPATIBLE WITH PIPING FOR SERVICE INTENDED AS MANUFACTURED BY NIBCO, CRANE OR MILWAUKEE. INCLUDE HOSE OR DRAIN VALVES AT LOW POINTS WHERE FIXTURES CANNOT BE USED FOR DRAINAGE. 4_3 INSTALL SHOCK ABSORBERS AT EACH QUICK CLOSING FIXTURE AND WHERE REQUIRED TO PREVENT WATER HAMMER AS MANUFACTURED BY J.R. SMITH SIOUX CHIEF OF ZURN. 4_4 HANGERS ON INSULATED PIPE TO BE OUTSIDE OF INSULATION, SIZED ACCORDINGLY AND WITH A SUFFICIENT SADDLE TO PROTECT INSULATION AS MANUFACTURED BY GRINNELL OR MICHIGAN. 4_5 DOMESTIC WATER PIPING SHALL BE AS FOLLOWS: 4.5a ABOVE GRADE - TYPR "L" HARD COPPER ASTM B 88-832 WITH WROUGHT COPPER FITTINGS ASTM B 16.22 1980 AND NON -LEAD OR ANTIMONY SOLDER JOINTS. 4.5b BELOW GRADE -TYPE "K" SOFT COPPER WITHOUT JOINTS. 4_6 FLUSH, VENT AND SANITIZE ALL WATER PIPING WITH CHLORINE AS REQUIRED PER AWWA, LOCAL BUILDING DEPARTMENT AND HEALTH DEPARTMENT CODES. 4_7 DOMESTIC HOT AND COLD WATER PIPING UNDER CONCRETE FLOOR TO BE COVERED WITH SAND SO THAT PIPING WILL NOT BECOME EMBEDDED IN THE FLOOR SLAB. 4_8 ALL PIPING UNDER CONCRETE FLOOR SHALL BE TYPE "K" SOFT COPPER, CONTINUOUS. NO SPLICES OR FITTINGS WILL BE ALLOWED. 4_9 EXTREME CAUTION MUST BE TAKEN SO THAT NO COPPER PIPING AND INSULATION UNDER CONCRETE FLOOR BECOMES CRUSHED, CUT, SPLIT OR DEFORMED DURING THE POURING OF THE FLOOR SLAB. 5.0 FIRE PROTECTION PIPING 5_1 SEE SECTION 15300, FIRE PROTECTION SYSTEMS. 6.0 FIRESTOPPING 6_1 SEE SECTION 15050, BASIC MATERIALS AND METHODS. DIVISION 15500 - HEAT GENERATION EQUIP ENT 1.0 GENERAL 1_1 FURNISH ALL MATERIAL, LABOR, EQUIPMENT, AND ACCESSORIES AS REQUIRED TO INSTALL EQUIPMENT AS INDICATED ON MECHANICAL DRAWINGS. 1_2 INSTALL IN FULL ACCORDANCE WITH LOCAL CODE REQUIREMENTS, OTHER SPECIFICATION SECTION REQUIREMENTS, AND MANUFACTURER RECOMMENDATIONS. 2.0 EQUIPMENT SCHEDULES 2_1 SEE EQUIPMENT SCHEDULES ON MECHANICAL DRAWINGS. DIVISION 15700 - HVAC SYSTEMS AND EQUIPENT 1.0 GENERAL 1_1 FURNISH ALL EQUIPMENT, MATERIALS, LABOR, TOOLS, ETC., FOR THE COMPLETE HVAC SYSTEM. INSTALL COMPLETE AND PLACE IN OPERATION. 1_2 CONTRACTORS BIDDING THIS PROJECT SHALL VISIT THIS SITE AND FAMILIARIZE THEMSELVES WITH ALL CONDITIONS AFFECTING THEIR WORK SUBMISSION OF A BID ON THIS PROJECT SHALL BE CONSTRUED AS HAVING SUCH KNOWLEDGE. 1_3 VERIFY EXACT CONDITIONS IN FIELD AND COORDINATE WITH THESE DRAWINGS AND OTHER TRADES BEFORE BEGINNING NEW WORK 1_4 DETERMINE EXACT LOCATIONS FOR ALL NEW AND RELOCATED EQUIPMENT, PIPING, CONDUITS AND DUCTWORK IN FIELD. 1_5 COORDINATE WORK OF THIS CONTRACT WITH OTHER TRADES. CONFLICTS SHALL IMMEDIATELY BE BROUGHT TO THE ATTENTION OF THE ARCHITECT. ARCHITECTS RESOLUTION TO CONFLICTS SHALL BE FINAL. 1_6 ANY DISCREPANCIES BETWEEN WHAT IS SHOWN ON DRAWINGS OR SPECIFIED AND THE ACTUAL CONDITIONS IN THE FIELD SHALL IMMEDIATELY BE BROUGHT TO THE ATTENTION OF THE ARCHITECT BEFORE PROCEEDING. 1_7 BUILDING AND SURFACES DAMAGED DURING INSTALLATION SHALL BE REPAIRED, REPLACED, AND/OR RESTORED TO ORIGINAL CONDITION AFTER COMPLETION OF WORK AND BEFORE ACCEPTANCE BY OWNER. 2.0 EQUIPMENT 2_1 MECHANICAL CONTRACTOR TO FURNISH ALL HVAC EQUIPMENT INDICATED AND/OR SCHEDULED ON THE DRAWINGS COMPLETE WITH BASES, ISOLATORS, SUPPORTS AND OTHER REQUIRED ACCESSORIES. 2_2 INSTALL COMPLETE AND PLACE IN PROPER OPERATION PER MANUFACTURER'S RECOMMENDATIONS, LUBRICATE AND ADJUST AS REQUIRED. FURNISH AND INSTALL CLEAN SET OF FILTERS PRIOR TO BALANCING. 2_3 EQUIPMENT TO BE MAKE AND MODEL AS SCHEDULED UNLESS ALTERNATE EQUIPMENT OF EQUIVALENT QUALITY AND PERFORMANCE IS SUBMITTED AS A SUBSTATION PRIOR TO BIDDING. ALL SUBSTITUTIONS ARE SUBJECT TO ACCEPTANCE WITHOUT QUALIFICATION BY OWNER, ENGINEER AND ARCHITECT. 2_4 CONTRACTOR SHALL PERFORM ROUTINE SERVICE INSPECTION OF ALL EXISTING HVAC EQUIPMENT TO REMAIN. LUBRICATE BEARINGS, SERVICE CONTROL SYSTEMS, REPLACE FAN BELTS AND INSTALL NEW FILTERS IN EACH ROOFTOP UNIT. 2_5 CONTRACTOR SHALL FIELD VERIFY REFRIGERANT CHARGE AND ADD REFRIGERANT IF THE CHARGE IS LESS THAN MANUFACTURER'S SPECIFICATIONS 2_6 SUBMIT SERVICE REPORT TO TENANT INDICATING CONDITION OF UNITAND REPORTANY MAJOR COMPONENT FAILURES OR MALFUNCTIONS. REPORT SHALL INCLUDE COST TO SERVICE ALL MALFUNCTIONING OR DAMAGED ITEMS LISTED. COST SHALL INCLUDE PARTS AND LABOR, EQUIPMENT SHALL BE PLACED IN FULL OPERATION WITH CONTROLS CALIBRATED UPON COMPLETION OF PROJECT. 3.0 COOLING COIL CONDENSATE DRAINS 3_1 PROVIDE EACH ROOFTOP UNIT WITH A FOUR (4) INCH DEEP TRAPPED CONDENSATE DRAIN WITH CLEANOUT OF SCHEDULE 40 PVC. TERMINATE OVER CONCRETE SPLASH BLOCK ON ROOF OR AS REQUIRED PER LOCAL CODE. 4.0 EQUIPMENT SCHEDULES 4_1 SEE EQUIPMENT SCHEDULES ON MECHANICAL DRAWINGS. DIVISION 15800 - AIR DISTRIBUTION SYSTEMS 1.0 GENERAL 1_1 FURNISH ALL MATERIALS, LABOR, EQUIPMENT AND ACCESSORIES REQUIRED TO INSTALL COMPLETE AIR DISTRIBUTION SYSTEMS. 1_2 CONTRACTORS BIDDING THIS PROJECT SHALL VISIT THIS SITE AND FAMILIARIZE THEMSELVES WITH ALL CONDITIONS AFFECTING THEIR WORK. SUBMISSION OF A BID ON THIS PROJECT SHALL BE CONSTRUED AS HAVING SUCH KNOWLEDGE. 1_3 VERIFY EXACT CONDITIONS IN FIELD AND COORDINATE WITH THESE DRAWINGS AND OTHER TRADES BEFORE BEGINNING NEW WORK. 1_4 DETERMINE EXACT LOCATIONS FOR ALL NEW AND RELOCATED DUCTWORK AND ACCESSORIES FIELD. 1_5 COORDINATE WORK OF THIS CONTRACT WITH OTHER TRADES. 1_6 ANY DISCREPANCIES BETWEEN WHAT IS SHOWN ON DRAWINGS OR SPECIFIED AND THE ACTUAL CONDITIONS IN THE FIELD SHALL IMMEDIATELY BE BROUGHT TO THE ATTENTION OF THE ARCHITECT BEFORE PROCEEDING. 1_7 BUILDING AND SURFACE DAMAGED DURING INSTALLATION SHALL BE REPAIRED, REPLACED, AND/OR RESTORED TO ORIGINAL CONDITION AFTER COMPLETION OF WORK AND BEFORE ACCEPTANCE BY OWNER. 1_8 PROVIDE ACCESS PANELS AT ALL GYPSUM BOARD CEILING WHERE MECHANICAL OR PLUMBING ARE CONCEALED ABOVE. 2.0 DUCTWORK 2_1 FABRICATE AND ERECT ALL DUCTWORK TO ASHRAE AND SMACNA STANDARDS FROM NO. 1 GALVANIZED STEEL. COMPLY WITH NFPA 90A REQUIREMENTS. 2_2 DUCTWORK SHALL BE SMACNA LOW PRESSURE CONSTRUCTION 2" STATIC PRESSURE RATING WITH SEAL CLASS B SEAMS AND JOINTS. 2_3 INCLUDE ALL ACOUSTIC, AIRFOIL SHAPED PERFORATED ALUMINUM TURNING VANES, MANUAL DAMPERS, FLEXIBLE CONNECTORS, GRILLES AND DIFFUSERS, ACOUSTIC LINING, AND OTHER SHEET METAL ACCESSORIES FOR THE PROJECT. 2_4 ALL BRANCH CONNECTION FITTINGS IN RECTANGULAR DUCTWORK SHALL BE 45 DEGREE TRANSITION TYPE, CONICAL FITTINGS OR SPIN -IN FITTINGS WITH INTEGRAL AIR SCOOPS. BUTT FITTINGS ARE NOT ACCEPTABLE. 2_5 INSTALL TWO (2) INCH DEEP SECONDARY DRAIN PAN BELOW DOMESTIC WATER HEATERS. PIPE THREE -FOURTH (3/4) INCH DRAIN TO FLOOR DRAIN INDEPENDENTLY OF ALL OTHER DRAINS. 2_6 EXHAUST DUCT OUTLETS SHALL BE INSTALLED A MINIMUM OF 10L "FROM ALL OUTSIDE AIR INTAKES.' " 3.0 DUCT LINER 3_1 ACOUSTIC LINE ALL RECTANGULAR DUCTS INDICATED ON DRAWINGS WITH ONE (1) INCH THINK NON -FLAKING, COATED MEDIUM DENSITY LINER, APPLY TO MANUFACTURER'S RECOMMENDATIONS. 3_2 DUCT DIMENSIONS INDICATED ON DRAWINGS ARE CLEAR INSIDE DIMENSIONS (FREE AREA). 3_3 ALL RECTANGULAR DUCTWORK DOWNSTREAM OF FPVAV BOXES SHALL BE LINED WITH 1" COATED MEDIUM DENSITY LINER. APPLY TO MANUFACTURER'S RECOMMENDATIONS. 3_4 DUCT LINER SHALL COMPLY WITH NFPA 90A AND 90B (LATEST EDITION) REQUIREMENTS. 4.0 DUCTACCESSORIES 4_1 FLEXIBLE DUCTWORK (AS MANUFACTURED BY CLEVAFLEX, FLEXMASTER OR WIREMOLD). FLEXIBLE DUCTS SHALL BE INDEPENDENTLY SUPPORTED FROM THE STRUCTURE AND CONNECTED WITH PLASTIC DRAW BANDS AND TIGHTENED. FLEXIBLE DUCTS SHALL BE LIMITED TO 48" MAXIMUM STRAIGHT LENGTHS. FLEXIBLE DUCTS SHALL BE CONSTRUCTED OF 1-1/2" INSULATION WITH VINYL VAPOR BARRIER JACKET AND RATED AT 10 W.C. FOR SIZES. THROUGH 12", U.L. LISTED, AND MEET 25/50 FLAME AND SMOKE TEST. FLEXIBLE DUCTS ARE NOT PERMITTED IN ROOMS WITHOUT CEILINGS. 4_2 DAMPERS (AS MANUFACTURED BY RUSKIN, NAILOR OR SAFE -AIR) FABRICATE IN ACCORDANCE WITH SMACNA STANDARDS. PROVIDE END BEARINGS AND LOCKING, INDICATING QUADRANT REGULATORS. BLADE TO BE SINGLE THICKNESS WITH CONTINUOUS HINGE OR ROD. 4_3 CONTROL DAMPERS (AS MANUFACTURED BY RUSKIN, NAILOR OR SAFE -AIR) FABRICATE BLADE OF DOUBLE THICKNESS SHEET METAL, OPPOSED BLADE TYPE WITH SELF -ALIGNING ROD AND END BEARING SUITABLE FOR USE WITH AN ACTUATOR. LL MECHANICAL NOTES (CONTINUED FROM PREVIOUS PAGE) 30.TENANT'S GENERAL CONTRACTOR, AT TENANT'S EXPENSE, SHALL BE REQUIRED TO FURNISH TEMPORARY WEATHERPROOFING FOR ALL ROOF PENETRATIONS; UNTIL LANDLORD'S ROOFING CONTRACTOR HAS MADE FINAL WEATHERPROOF PATCHES, ATTENANT'S EXPENSE.: TENANT`S STORE SPACE NUMBER SHALL BE PERMANENTLY STENCILED ON ONE SIDE OF ANY ROOF -MOUNTED HVAC UNIT, WITH MINIMUM THREE-INCH (3-) HIGH LETTERS: 31 ALL ROOF AND SLAB PENETRATIONS MADE BY TENANT'S GENERAL CONTRACTOR SHALL CONFORM TO LANDLORD'S STANDARD CRITERIA AND SHALL BE SUBJECT TO LANDLORD'S APPROVAL AS TO LOCATION AND CONSTRUCTION DETAILS. WEATHERPROOFING OF ANY ROOF PENETRATIONS REQUIRED BY TENANT SHALL BE PERFORMED BY LANDLORD'S AUTHORIZED ROOFING CONTRACTOR: TENANT'S GENERAL CONTRACTOR SHALL PAY ALL SUCH COSTS, THEREFORE, DIRECTLY TO SUCH ROOFING CONTRACTOR UPON THEIR DEMAND. ANY FAILURE TO FOLLOW THIS PROCEDURE, AND ANY DAMAGES RESULTING THEREFROM, SHALL BE AT THE TENANTS SOLECOST AND EXPENSE. 32.INSTALL ALL DUCTWORK AS TIGHT TO STRUCTURE AS POSSIBLE. ROUTE TO AVOID LIGHT FIXTURES. MAINTAIN DUCT HEIGHTS TO ACCOMMODATE CEILING HEIGHTS. REFER TO REFLECTIVE CEILING PLAN. 33.RIGID HVAC DUCTWORK SHALL BE SHEET METALL$ GALVANIZED STEEL aR ALUMINUM. FIBERGLASS DUCT BOARD OR OTHER NONMETALLIC MATERIAL IS NOT ACCEPTABLE. KITCHEN GREASE AND DISHWASHER'EXHAUST DUCTS SHALL BE 18 -GAUGE STAINLESS STEEL SHEET METAL WITH CONTINUOUSLY WELDED JOINTS AND SEAMS. KITCHEN GREASE EXHAUST DUCTS SHALL BE WRAPPED CONTINUOUSLY WITH AN APPROVED FIDE WRAP PRODUCT. 34.VERIFY INFIELD THAT THERE IS A CLEAR PATHWAY FOR THE HOOD DUCTWORK AND SPACE ON THE ROOF FOR THE NEW EXHAUST UNIT. IF THERE ARE ANY OBSTRUCTIONS, COORDINATE WITH WESTFIELD REPRESENTATIVE. 35.MAKE-UP AIR SYSTEMS ARE REQUIRED FOR ALL EXHAUST SYSTEMS DESIGNED FOR A MAX 90% OF ALL EXHAUST AIR QUANTITY. THE EXHAUST AND MAKE-UP AIR SYSTEMS SHALL BE ELECTRICALLY INTERLOCKED SO THAT ONE SWITCH ACTIVATES BOTH, 36.PROVIDE COMPLETE SPECIFICATION OF TYPE OF INSULATION AND FIRE -RATING DETAILS OF SHAFT. 37.ENSURE THERE IS PROPER SEPARATION BETWEEN SUPPLY AIR INTAKE' DUCTS AND EXHAUST DUCTS (A MINIMUM OF 10'), DIRECTION OF DISCHARGE IS AWAY FROM SUPPLY INTAKE DUCTS AND EXHAUST IS DOWNWIND, 38.PROVIDE LANDLORD WITH COPY OF TESTING AND BALANCING REPORT UPON COMPLETION. REVIEWED FOR CODE COMPLIANCE APPROVED '• OCT 14 2016 City of Tukwila BUILDING DIVISION , EIVED TUKWILA ©Cr 12 2016 PERMIT CENTER F E DATE 09/22/16 Q' 1 PLAN CHECK 09/28/16 ALL COMMENTS These drawings/specifications are the property of Kamus + Keller. They are furnished as contract documents only. The seal(s) and signature(s) apply only to the documents to which they affixed, and expressly dispialm any responsibility for all other plans, specifications, estimates, reports or other documents or instruments relating to or intended to be used for any part or parts of the architectural or engineering project. Additionally these drawings and seal(s) shall in no way convey or imply any time of warranty or certification relating to the performance of products and materials beyond those provided by their respective manufacturer. PROJECT NO. 16.0430.01 DRAWN/REVIEWED GFIBB DATE/ISSUE 09.07.2016 SHEET TITLE MECHANICAL SPECIFICATIONS SHEET NO. M1.1 r N a J J of J r> DO a-/00 C F WUJz< W~ W <C III W �W = � J F- 06 f.- _ p U) W F- O C:) C) T_ These drawings/specifications are the property of Kamus + Keller. They are furnished as contract documents only. The seal(s) and signature(s) apply only to the documents to which they affixed, and expressly dispialm any responsibility for all other plans, specifications, estimates, reports or other documents or instruments relating to or intended to be used for any part or parts of the architectural or engineering project. Additionally these drawings and seal(s) shall in no way convey or imply any time of warranty or certification relating to the performance of products and materials beyond those provided by their respective manufacturer. PROJECT NO. 16.0430.01 DRAWN/REVIEWED GFIBB DATE/ISSUE 09.07.2016 SHEET TITLE MECHANICAL SPECIFICATIONS SHEET NO. M1.1 r N a GENERAL NOTES 1. CONTRACTOR TO FAMILIARIZE HIMSELF WITH THE SITE AND VERIFY EXISTING CONDITIONS PRIOR TO CONSTRUCTION AND ADJUST FOR ACTUAL FIELD CONDITIONS AT NO EXPENSE TO OWNER. REPORT TO THE ARCHITECT AND OR ENGINEER ANY DISCREPANCIES WITH THE PLANS AND EXISTING CONDITIONS. 2. PROVIDE RETURN AIR FILTERS AT HVAC UNITS ON ROOF, NOT AT RETURN AIR GRILLE IN SPACE. 3. ALL EXHAUST AIR TERMINATIONS TO BE MINIMUM 15'1 FROM ANY AIR INTAKE. 4. ALL DUCTWORK, HANGERS, DAMPER CONSTRUCTION, SEAMS, INSTALLATION, ETC., SHALL CONFORM TO THE STANDARDS AS ADOPTED BY A.S.H.R.A.E. & SMACNA. ALL WORK SHALL CONFORM TO ALL APPLICABLE LAWS, RULES & REGULATIONS & RECOMMENDATIONS OF LOCAL BUILDING DEPARTMENT, NATIONAL BOARD OF FIRE UNDERWRITERS, N.F.P.A., & SHOPPING CENTER GENERAL SPECIFICATIONS. ALL DUCTWORK SHALL BE SHEETMETAL CONFORMING TO SMACNA STANDARDS FOR LOW PRESSURE DUCTWORK & A.S.H.RA.E. STANDARD 90-75. 5. THE MECHANICAL CONTRACTOR SHOULD FURNISH, CONNECT AND INSTALL THE THERMOSTAT/CONTROL WIRING AND THE ELECTRICAL CONTRACTOR SHOULD PROVIDE, INSTALL AND CONNECT THE ELECTRIC TO THE UNITS. 6. SCHEDULE OF WORK: THIS CONTRACTOR SHALL BE REQUIRED TO FAMILIARIZE HIMSELF WITH THE PROPOSED WORK SCHEDULE & SHALL COORDINATE HIS WORK SCHEDULE WITH THE OTHER TRADES, SO THAT WORK PROGRESSES CAN BE PLANNED IN A PROPER SYSTEMATIC FASHION TO AVOID ANY DUPLICATION OF EFFORT & RESULTANT DELAY OF PROJECT. 7. CUTTING & PATCHING: THIS CONTRACTOR MUST LAY OUT HIS WORK IN ADVANCE OF NEW CONSTRUCTION IN ORDER THAT UNNECESSARY CUTTING & PATCHING WILL BE AVOIDED. OPENINGS SHALL BE REUSED AS SHOWN AND ANY MODIFICATIONS TO ROOF OPENINGS SHALL BE APPROVED BY THE LANDLORD, DONE BY THE LANDLORD'S ROOFING CONTRACTOR AND PAID FOR BY THE CONTRACTOR. 8. SUPPLY DUCTWORK INSIDE BUILDING SHALL BE INSULATED WITH 1/2" ALUMINUM FOIL FACED FIBERGLASS BLANKET OVERLAPPED ON ALL DUCTWORK SHALL BE INSTALLED IN CONCEALED SPACE ABOVE CEILINGS. 9. PROVIDE CLEAR ACCESS TO ALL EQUIPMENT WITHIN THE LEASED SPACE. 10. CONTRACTOR SHALL PROVIDE OPERABLE H & V SYSTEMS COMPLETE IN ALL RESPECTS AS CONTEMPLATED BY THE INFORMATION INDICATED ON THE DRAWINGS. IT IS NOT INTENDED THAT THE DRAWINGS & SPECIFICATIONS INDICATE EACH & EVERY ITEM OF INFORMATION NECESSARY FOR COMPLETE SYSTEMS BUT INDICATE SUFFICIENT INFORMATION FOR THE CONTRACTOR TO SECURE ADDITIONAL INFORMATION FROM OTHER SOURCES & PROVIDE ALL MATERIALS, EQUIPMENT & LABOR NECESSARY FOR COMPLETE INSTALLATIONS. 11. ALL LABOR, MATERIALS & EQUIPMENT SHALL BE PROVIDED WITH ONE YEAR GUARANTEE FROM DEFECTS. 12. PROVIDE ARCHITECT WITH THREE (3) COPIES OF AIR BALANCE REPORT. INSTRUCT OWNER IN USE OF EQUIPMENT. AIR BALANCE REPORT TO BE AN INDEPENDENT TESTING AGENCY. AIR BALANCE TEST REPORT TO BE TAKEN IN THE LATE AFTERNOON WITH THE FOLLOWING TEMPERATURE READINGS DOCUMENTED (IN ADDITION TO CFM) 1.) TEMPERATURE OF AIR LEAVING EACH CEILING DIFFUSER, 2.) TEMPERATURE OF AIR LEAVING HVAC UNIT, 3.) TEMPERATURE OF OUTSIDE AIR AT HVAC UNIT, 4.) TEMPERATURE OF AIR WITHIN SALES AREA (AT THERMOSTAT). 13. LOCATE CURBS OVER LOAD BEARING SUPPORTS AND IN CLOSE PROXIMITY TO EQUIPMENT LOCATION AS INDICATED ON PLANS. 14. COORDINATE WITH LANDLORD'S AUTHORIZED STRUCTURAL ENGINEER AS REQUIRED. 15. INSTALL CURB AND COORDINATE OPENINGS IN ROOF. OPENINGS TO BE AS SPECIFIED IN INSTALLATION MANUALS. 16. THE T.G.C. SHALL FIELD VERIFY THE LOCATIONS OF EXISTING HVAC SYSTEMS, EQUIPMENT AND DEVICES. 17. THE T.G.C. SHALL PROVIDE REQUIRED STRUCTURAL SUPPORT FOR ANY NEW ROOF MOUNTED OR SUSPENDED HEATING, VENTILATION, OR AIR CONDITIONING EQUIPMENT AS REQUIRED. THE T.G.C. SHALL COORDINATE SIZES AND PLACEMENT OF UNITS WITH THE MECHANICAL SUBCONTRACTOR AND THE LANDLORD. 18. ALL ROOF CURBS/PENETRATIONS ARE TO BE INSTALLED IN STRICT ACCORDANCE WITH THE EQUIPMENT MANUFACTURER'S DETAILS. ALL REQUIRED ROOFING SHALL BE BY THE LANDLORD'S DESIGNATED ROOFING CONTRACTOR AS REQUIRED TO MAINTAIN THE WARRANTY AND INTEGRITY OF THE ROOF. NOTES BY SYMBOL OEXISTING AIR HANDLERS, AND CONDENSING UNITS TO REMAIN. VERIFY LOCATION OF UNIT FIELD PRIOR TO BID. (D EXISTING THERMOSTATS TO REMAIN EXISTING O/A DUCT TO REMAIN EXISTING RESTROOM EXHAUST FAN TO REMAIN OEXISTING CONDENSER LOOP TO REMAIN G EXISTING TOILET ROOM TO REMAIN AS IS. THE CONTRACTOR SHALL INSPECT ENTIRE PLUMBING SYSTEM AND PROVIDE SERVICE AND/OR REPAIRS AS REQUIRED TO ENSURE PROPER, DEPENDABLE OPERATION. THE EXISTING FIXTURES TO BE REUSED SHALL BE DISINFECTED, CLEANED AND/OR REFURBISHED TO THE TENANTS SATISFACTION. REFER TO ARCHITECTURAL DRAWINGS FOR ANY ADJUSTMENTS THAT MAY BE REQUIRED TO COMPLY WITH CODE ISSUES. O7 EXISTING CONDENSATE LINE TO REMAIN HVAC EXISTING SYSTEM NOTES 1 T.G.C. SHALL PROVIDE THE FOLLOWING (BUT NOT LIMITED TO): THE COMPLETE LUBRICATION OF ALL SHAFTS AND BEARINGS THAT HAVE LUBRICATION ZERTS. 2. THE REPLACEMENT OF ALL BELTS, HOSES AND FABRIC/RIBBER COATED ITEMS THAT ARE SUBJECT TO WEAR. 3. THOROUGH CLEANING OF COILS. THE STRAIGHTENING (COMBING) OF ALL LOUVERS & FINS. 4. EXAMINE AND REPAIR ALL ELECTRICAL WIRING, CONTROLS, STARTERS, RELAYS, CAPACITORS AND LIKE ITEMS THAT TEND TO DETERIORATE OVER TIME OR BECOME NONOPERATIONAL. THIS INCLUDES SMOKE DETECTORS. 5. THE REPLACEMENT OF "LIFETIME" BUSHINGS AND BEARINGS THAT ARE SEALED AND CANNOT BE LUBRICATED BUT ARE IN FACT WORN BEYOND REASONABLE USE. 6. THE REPLACEMENT OF ALL DISPOSABLE FILTERS ON THE DAY OF THE STORE'S GRAND OPENING. 7. VERIFY ANY WORK REQUIRED BY THE LANDLORD PRIOR TO BID. 8. CHECK/REPAIR CONDENSATE DRAIN LINE AND PAN. 2" WIDE MIN. DUCT STRAP 48" O.C. MAX. RIGID ROUND METAL DU( EXTERNALLY INSULATED RIGID ROUND DUCT ELBC EXTERNALLY INSULATED INSULATED FLEXIBLE - DUCT MAX. LENGTH 5'-0" VOLUME DAMPER (FOR FINAL BALANCE ADJUSTMENT) DIFFUSER TRIM FRAME- DIFFUSER Z� DEMISING WALLS GO TO DECK METAL SUPPLY DUCT J EXTERNALLY INSULATED CEILING r d[ -II 11111qe i-. _ t 7 118"0 CITY REQUIREMENT: -ALL WORK SHALL COMPLY WITH CURRENT 2015 CODES AT&T i f - TENANT i = SPACE r a I i�♦.. ' • 1 } r...E �-1 i f�-s .. i -It YY • ..•; L� Iii 1-1 jet L E-, v •.� IF < • � , rl � •• � a s;�s .. r' r IJ �� J f • _ • f •` 1 i •. 1 ff i:v_caT.ayi�n � •• out t7� I i M i rv.I . C- F7 ! • 1;-T3 ` ..yds, •-.x',�..I r r� -� C~tel s ti � .",� , L 3 '.� �• ��� SITE LA 0 9CAL E: NTS DEMISING WALLS GO TO DECK A F4A F4A `. F4A' :. • :.' F4A ::. . ' F4A F -4A :. F4A:...: :: .:F4A .' • ; V32-07 REVIEWED FOR =DE COMPLIANCE >; APPROVED OCT 14 2Q16 i. t City Of-rukVilla BUILDING DIVISION J J :•. .. ....:.. : ..... 0 L. ........... 118"0 CITY REQUIREMENT: -ALL WORK SHALL COMPLY WITH CURRENT 2015 CODES AT&T i f - TENANT i = SPACE r a I i�♦.. ' • 1 } r...E �-1 i f�-s .. i -It YY • ..•; L� Iii 1-1 jet L E-, v •.� IF < • � , rl � •• � a s;�s .. r' r IJ �� J f • _ • f •` 1 i •. 1 ff i:v_caT.ayi�n � •• out t7� I i M i rv.I . C- F7 ! • 1;-T3 ` ..yds, •-.x',�..I r r� -� C~tel s ti � .",� , L 3 '.� �• ��� SITE LA 0 9CAL E: NTS DEMISING WALLS GO TO DECK A F4A F4A `. F4A' :. • :.' F4A ::. . ' F4A F -4A :. F4A:...: :: .:F4A .' • ; V32-07 REVIEWED FOR =DE COMPLIANCE >; APPROVED OCT 14 2Q16 i. t City Of-rukVilla BUILDING DIVISION 1 DEMISING WALLS GO TO DECK -(2)D P F4A- .. •� .' LL C IC L 'CL.G SCALE: 1/4'1 .. CLG _ .n1 --CIEIVED CITY OF TUKWILA OCT 12 2016 PERMIT CENTER I�IIIII� ISSUE DATE � 09/22/16 I r \ PLAN CHECK', 09/28/16 ALL COMMENTS T 1:13 m00 N r at: CD T o � ,n to 6 C Co r �M> =mo�� mCD(7au. N C C (D I) C C U ■ C C N IQ_ C O .a J J L 0 00 LL Q WP W <C W = W 0 _ L6 [- 111- 4 Q0Ofn 'Lit W CLP F4A' Q : ia"O to''fa F12 '.. F12-. F12 - F12 F4A. .. •. 350 :. 3S0 350 (2)D. 0 CLG • F4A.: �.. CD CD�. tl Ll' L L LL 11 ., r- (I.. ' 'F4A F4AF4A: --F4A F4A F4A 1 DEMISING WALLS GO TO DECK -(2)D P F4A- .. •� .' LL C IC L 'CL.G SCALE: 1/4'1 .. CLG _ .n1 --CIEIVED CITY OF TUKWILA OCT 12 2016 PERMIT CENTER I�IIIII� ISSUE DATE � 09/22/16 I r \ PLAN CHECK', 09/28/16 ALL COMMENTS T 1:13 m00 N r at: CD T o � ,n to 6 C Co r �M> =mo�� mCD(7au. N C C (D I) C C U ■ C C N IQ_ C O .a These drawingstspecifications are the property of Kamus + Keller. They are furnished as contract documents only. The seal(s) and signature(s) appy only to the documents to which they affixed, and expressly dispiaim any responsibility for all other plans, specifications, estimates, reports or other documents or instruments relating to or intended to be used for any part or parts of the architectural or engineering project. Additionally these drawings and seal(s) shall in no way convey or Imply any time of warranty or certification relating to the performance of products and materials beyond those provided by their respective manufacturer. PROJECT NO. 16.0430.01 DRAWN/REVIEWED GFIBB DATE/ISSUE 09.07.2016 SHEET TITLE MECHANICAL PLAN SHEET NO. M2.0 N a J J 0 00 Q WP W <C W = W 0 _ [- 111- O Q0Ofn W These drawingstspecifications are the property of Kamus + Keller. They are furnished as contract documents only. The seal(s) and signature(s) appy only to the documents to which they affixed, and expressly dispiaim any responsibility for all other plans, specifications, estimates, reports or other documents or instruments relating to or intended to be used for any part or parts of the architectural or engineering project. Additionally these drawings and seal(s) shall in no way convey or Imply any time of warranty or certification relating to the performance of products and materials beyond those provided by their respective manufacturer. PROJECT NO. 16.0430.01 DRAWN/REVIEWED GFIBB DATE/ISSUE 09.07.2016 SHEET TITLE MECHANICAL PLAN SHEET NO. M2.0 N a