HomeMy WebLinkAboutPermit S15-0020 - AIRFIELD BUSINESS CENTER - MONUMENT SIGN REPLACEMENT (NULL)AIRFIELD BUSINESS CENTER
Monument Sign
Wall Signs
9100 LMWS
S15-0020
SIGN INSPECTION (PLANNING)
File No. S15-0020
Name of Tenant: Airfield Business Center
Sign Address: 9100 E Marginal Way S
Date Photo Taken: September 10,2015
_ Sign appears to conform to permit application
Sign appears different from permit application
Sign not installed as of XX/XX/200X
Make new site visit and take photo by XX/XX/200X
Comments: Sign appears to conformto approved permit. DR
A14R IELD:
BUST NES "CENTER
1 ;
City of Tukwila
• Department of Community Development
+ 6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206-431-3670
Web site: http://www.TukwilaWA.gov
PERMANENT SIGN PERMIT
Parcel No: 5422600150 Permit Number: S15-0020
Address: 9100 E MARGINAL WAYS Issue Date: 5/12/2015
Permit Expires On: 11/8/2015
Owner:
Name: WOOD MEADOWS LLC
Address: PO BOX 654, KIRKLAND, , 98083
Contact Person:
Name: JIM MINAR Phone:
Address:
Contractor:
Name: SUPERGRAPHICS Phone:
Address: GM NAMEPLATE - PARENT CO 204015 AVE W, SEATTLE, WA,
98119
License No: Expiration Date:
Business:
Name: AIRFIELD BUSINESS CENTER
Address: , , ,
DESCRIPTION OF WORK:
REPLACE (1) EXISTING MONUMENT SIGN WITH NEW MONUMENT SIGN
(2) BUILDING MOUNTED SIGNS - BOTH ARE ABOVE A PUBLIC ENTRANCE
Fees Collected: $765.45 Zoning: MIC/H Electricity Provided by: SEATTLE CITY LIGHT
Types of Sign:
1. BUILDING -WALL
EXPOSED BUILDING FACE:
1080
SIGN AREA (SQ FT):
46
2. BUILDING -WALL
EXPOSED BUILDING FACE:
2200
SIGN AREA (SQ FT):
25
3. FREESTANDING -COMMERCIAL
STREET NAME:
E Marginal Way S
SIGN AREA PER FACE:
48
SIGN AREA PER SIGN:
96
WIDTH OF SIGN:
8
SIGN HEIGHT:
6
SETBACK:
6
WE
STREET FRONTAGE:
353
Planning Division Authorized Signatur Date:
I hearby certify that I have read and examined thi ermit and know the same to be true and correct. All
provisions of law and ordinances governing this work will ha complied with, whether specified herein or not.
ACCEPTANCE BY EMAIL
Signature: Date:
SIGNATURE
Print Name:
THIS PERMIT SHALL BECOME NULL AND VOID IF THE WORK IS NOT COMMENCED WITHIN 180 DAYS FROM THE
DATE OF ISSUANCE, OR IF THE WORK IS SUSPENDED OR ABANDONED FOR A PERIOD OF 180 DAYS FROM THE
LAST INSPECTION.
Sign permit inspections are conducted once a month. This allows approximately 30 days for the sign to be
manufactured and installed. Please let us know if more time is needed.
If payment for the job is pending final inspection approval, please provide the sign permit information by email
to teri.svedahl@tukwilawa.gov or call 206-431-3670 and we will complete the inspection within
five (5) business days.
Electrical permits and inspections occur independent of this permit.
FINAL INSPECTION APPROVAL: DATE:
Teri Svedahl
From:
Teri Svedahl
Sent:
Tuesday, May 12, 2015 2:47 PM
To:
'craigg@supergraphics.com'
Subject:
FW: Airfield Business Center signs
Attachments:
permit.pdf, plans.pdf
Craig —
I am forwarding this to you since Jim is out of the office and I didn't want it to sit.
Thanks,
Teri
Teri Svedahl JAdmmistrattve Support Technician
.........
City of Tukwila I Planning Department
6300 Southcenter Boulevard - Ste 100 I Tukwila WA 98188
Teri. Svedahlga TukivilaWA.gov
The City of opportunity, the community of choice.
Please be advised: This email is subject to public disclosure
From: Teri Svedahl
Sent: Tuesday, May 12, 2015 2:43 PM
To: jminar@supergraphics.com
Subject: Airfield Business Center signs
Hi Jim —
Attached is the permit and approved plans for the wall signs and the monument sign for Airfield Business Center.
Have a great rest of your week.
— Teri
Ten Svedahl .
City of Tukwila I Planning Department
6300 Southcenter Boulevard - Ste 100 I Tukwila WA 981.88
Teri.Svedahlo Tukwila WA. ov
The City of opportunity, the community of choice.
Please be advised: This email is subject to public disclosure
1
i
The issuance of some signage within the City may require a permit from the Washington State Department of Transportation
(WSDOT). It is the applicant's responsibility to obtain all required permits from the appropriate government agency. For
information on permits that may be required from WSDOT call (360) 705-7296.
The issuance of a sign permit shall not be construed to be a permit for, or an approval of, any violation of any of the provisions
of this code or of any other ordinance of the City. Permits presuming to give authority to violate or cancel the provisions of this
code or other ordinances of the City shall not be valid. The issuance of a permit based on construction documents and other
data shall not prevent the Director from requiring correction of errors in the construction documents and other data (TMC
19.12.020 (C)).
Pursuant to TMC 19.12.0150, sign permits shall be valid for 180 days from the date of issuance of the sign permit. The
Director may approve one extension of up to 30 days if a written request is submitted to the City BEFORE expiration of the
180 day period.
A final inspection of the sign is required for all signs when installation is complete. The applicant or installer is required to
schedule the final Sign inspection through the City's Inspection line at (206)138-9350. The 4 -digit inspection code needed for
scheduling the final Sign inspection is 1510. The applicant or installer does not need to be present for the final Sign inspection.
It is the responsibility of the installer to obtain the electrical permit and inspections from the City of Tukwila Permit Center at
(206) 431-3670. The electrical inspector will need access to complete the Electrical portion of the inspection.
The City's sign code permits a variety of building mounted signs, including wall signs, signs on awnings, canopy signs and
projecting signs. This sign permit application can be used to determine the total number of building mounted signs permitted
for your business. The application also provides the specific code standards for the common types of building mounted signs;
see TMC 19 Sign Code for details. Please note that you may not qualify for all signage types outlined in this application.
Each public entrance is eligible for either a flush mounted wall sign or an awning face sign. In some cases an additional wall
sign maybe permitted on walls that do not have entrances, see Section 2 of this application.
Use the table below to determine the maximum permitted size' of your wall sign:
Maximum Sign Area
AREA (L x H) of Exposed Building
Face EBF insquare feet
Permitted Sign Area
0-500
LU
501-1,500
(EBF -500) x .04 + 25 square feet
1501-3,000
....
N
�. c
_
W
Over 5,000
E
o
�/
Ox I h
Gri
E
Q
C0
located, see 19.08.110.
MaximumLL
Sign Area
a
The issuance of some signage within the City may require a permit from the Washington State Department of Transportation
(WSDOT). It is the applicant's responsibility to obtain all required permits from the appropriate government agency. For
information on permits that may be required from WSDOT call (360) 705-7296.
The issuance of a sign permit shall not be construed to be a permit for, or an approval of, any violation of any of the provisions
of this code or of any other ordinance of the City. Permits presuming to give authority to violate or cancel the provisions of this
code or other ordinances of the City shall not be valid. The issuance of a permit based on construction documents and other
data shall not prevent the Director from requiring correction of errors in the construction documents and other data (TMC
19.12.020 (C)).
Pursuant to TMC 19.12.0150, sign permits shall be valid for 180 days from the date of issuance of the sign permit. The
Director may approve one extension of up to 30 days if a written request is submitted to the City BEFORE expiration of the
180 day period.
A final inspection of the sign is required for all signs when installation is complete. The applicant or installer is required to
schedule the final Sign inspection through the City's Inspection line at (206)138-9350. The 4 -digit inspection code needed for
scheduling the final Sign inspection is 1510. The applicant or installer does not need to be present for the final Sign inspection.
It is the responsibility of the installer to obtain the electrical permit and inspections from the City of Tukwila Permit Center at
(206) 431-3670. The electrical inspector will need access to complete the Electrical portion of the inspection.
The City's sign code permits a variety of building mounted signs, including wall signs, signs on awnings, canopy signs and
projecting signs. This sign permit application can be used to determine the total number of building mounted signs permitted
for your business. The application also provides the specific code standards for the common types of building mounted signs;
see TMC 19 Sign Code for details. Please note that you may not qualify for all signage types outlined in this application.
Each public entrance is eligible for either a flush mounted wall sign or an awning face sign. In some cases an additional wall
sign maybe permitted on walls that do not have entrances, see Section 2 of this application.
Use the table below to determine the maximum permitted size' of your wall sign:
Maximum Sign Area
AREA (L x H) of Exposed Building
Face EBF insquare feet
Permitted Sign Area
0-500
EBF x.05 or 20 square feet, whichever is larger
501-1,500
(EBF -500) x .04 + 25 square feet
1501-3,000
EBF -1,500 x .03+ 65 square feet
3,001-5,000
EBF -3,000 x .02+ 110 square feet
Over 5,000
150 square feet maximum
Wall Sign Worksheet
I This table is inapplicable if your site is covered under an approved Master Sign Program and an increase in sign area was granted.
Reserved for
For more detail see the Sign Code Language, TMC
Si n
Sin
City Use
19.20.050 A.
Wall Area4f
,2 )(/
�/
Ox I h
The size of the sign is based on the area of the wall
fronting the tenant space where the sign will be
located, see 19.08.110.
MaximumLL
Sign Area
a
e D *
Calculate the maximum sign area allowed for the
wall from the table above.
4
Proposed
/ J /'
`�('�
�S
Calculate the area by drawing one box around the
Area of Si
entire sign face or copy using 90 degree angles.
Sign Copy
�l✓�
List what the sign will say (for example name of
$S
business).
f
%�Q �,j��3 s .
I This table is inapplicable if your site is covered under an approved Master Sign Program and an increase in sign area was granted.
W,
W
> C=
c
UJ co
�..) 0 >
LES Q "�
M
New Freestanding Sten
��t�f-t �c wtQ�a� � St g N L®c+�lp-tc9 tJ
When the current sign code became effective on August 24, 2010, the City strived to create a sign code that would reduce the
impact to property owners and businesses that had existing freestanding signs on their property. The city permits refaces and
copy changes to existing freestanding signs under several different scenarios:
1. A freestanding sign that conforms to the current sign code is permitted refaces and copy changes with a permit.
A freestanding sign that is not considered a freeway interchange sign, which was legally installed under the previous
sign code but does not meet the current Sign Code, is permitted to have refaces and copy changes for up to TEN years
from the effective date of the City's Sign Code (8/24/10) if a Non -Conforming Sign Permit was obtained. A Non -
Conforming Sign Permit is the only way to be allowed this `grace period'. A permit is still required for any reface or
copy change. At the end of the ten year grace period the sign may remain as -is indefinitely; however additional
refaces or copy changes will require that the sign be brought into conformance with the Sign Code.
Please note, modifying the sign height, increasing the sign area, or relocating the sign is not permitted without bringing
the sign into full conformance with the City's Sign Code.
3. A freestanding sign that is considered a freeway interchange sign and was legally installed under the previous sign
code is permitted to have refaces and copy changes for up to FIVE years from the effective date ofthe City's Sign
Code (8/24/10). A permit is required for any reface or copy change. Please note, modifying the sign height,
increasing the sign area, or relocating the sign is not permitted. At the end of the five year period the sign may remain
as -is indefinitely, however any changes to the face or structure of the sign will require that the sign be removed.
4. Freestanding signs that did not comply with the City's previous sign code, for example those that were installed while
an area was in King County, are not permitted to have any changes to the face or structure of the sign without bringing
the sign into conformance with the Sign Code.
Staff can help you research previous permit history to determine if your existing freestanding sign was installed under the
provisions of the City's previous Sign Code, and if a Non -Conforming sign permit was issued.
You will note that under Section 1 of this sign permit application additional signs are allowed for premises with over 800 feet of
linear street frontage or for corner properties. Even if your property qualifies for this additional signage under Section 1 you
will not be able to install it until any existing non -conforming sign(s) are removed (TMC 19.36.070).
Existinu Freestanding.Vien Details
Monument Monument Monument Monument Monument Monument
Existing
Sign 1 Sign 2 Sign 3 Sign 4 Sign 5 Sign 6
Name of Street on which
q,>
sign will be placed?
Total Sign message area
per face.
Total Sign message area
per sign
Total Sign Size per face
Total Sign Size per si n.
Width of Sign
Sign Height (ft -in)
Distance (ft) from closest
edge of sign to property
E�
lines
4
��t�f-t �c wtQ�a� � St g N L®c+�lp-tc9 tJ
When the current sign code became effective on August 24, 2010, the City strived to create a sign code that would reduce the
impact to property owners and businesses that had existing freestanding signs on their property. The city permits refaces and
copy changes to existing freestanding signs under several different scenarios:
1. A freestanding sign that conforms to the current sign code is permitted refaces and copy changes with a permit.
A freestanding sign that is not considered a freeway interchange sign, which was legally installed under the previous
sign code but does not meet the current Sign Code, is permitted to have refaces and copy changes for up to TEN years
from the effective date of the City's Sign Code (8/24/10) if a Non -Conforming Sign Permit was obtained. A Non -
Conforming Sign Permit is the only way to be allowed this `grace period'. A permit is still required for any reface or
copy change. At the end of the ten year grace period the sign may remain as -is indefinitely; however additional
refaces or copy changes will require that the sign be brought into conformance with the Sign Code.
Please note, modifying the sign height, increasing the sign area, or relocating the sign is not permitted without bringing
the sign into full conformance with the City's Sign Code.
3. A freestanding sign that is considered a freeway interchange sign and was legally installed under the previous sign
code is permitted to have refaces and copy changes for up to FIVE years from the effective date ofthe City's Sign
Code (8/24/10). A permit is required for any reface or copy change. Please note, modifying the sign height,
increasing the sign area, or relocating the sign is not permitted. At the end of the five year period the sign may remain
as -is indefinitely, however any changes to the face or structure of the sign will require that the sign be removed.
4. Freestanding signs that did not comply with the City's previous sign code, for example those that were installed while
an area was in King County, are not permitted to have any changes to the face or structure of the sign without bringing
the sign into conformance with the Sign Code.
Staff can help you research previous permit history to determine if your existing freestanding sign was installed under the
provisions of the City's previous Sign Code, and if a Non -Conforming sign permit was issued.
You will note that under Section 1 of this sign permit application additional signs are allowed for premises with over 800 feet of
linear street frontage or for corner properties. Even if your property qualifies for this additional signage under Section 1 you
will not be able to install it until any existing non -conforming sign(s) are removed (TMC 19.36.070).
Existinu Freestanding.Vien Details
Existing
Existing
Notes:
Freestanding Sign l
Freestanding Sign 2
Date of last sign
permit issued by the
City for sign that is
being modified:
Existing Sign Area:
Proposed Sign Area:
Sign Height
(feet -inches):
Distance from closest
edge of sign to
property lines (in
feet):
A sign permit is required for the installation of a new freestanding sign. In most circumstances the City only allows new
freestanding signs to be monument style signs. Certain large premises that have gone through the Master Sign Program are
eligible for grand monument signs. Information on installing a new freestanding sign is found in SECTION 1 of this
application. Information on installing new grand monument signs can be found in SECTION 2 of this application.
A sign permit is also required for any proposed reface or copy change to an existing freestanding sign in the City. In some
cases a reface or copy change of an existing freestanding sign requires that the sign be removed. Information on completing a
reface or doing a copy change to an existing freestanding sign can be found under SECTION 3 of this application.
Total Length of Street Frontage Along All Streets: 3 r
Does the site front on more than one street, but have less than 800 feet of linear frontage, combined on O
both streets?
Is the site use a mufti-familymufti-famfly or institutional use in a residential Zone (LDR, MDR, or HDR)? )U
?List existing Si ns
M.IAtt ffid IM ®V -
Section 1- New Freestanding Signs
Freestanding Signs in Commercial/Industrial Zones
Each premise is permitted to have one freestanding -monument style sign. Additional monument signs are permitted based on
the total amount of linear street frontage along the premise. Table 1 below outlines the development standards and total number
of signs permitted for most premises.
Total ROW of
Allowable Sign Message Area
Total Allowable
Maximum
Premise
Nc
E
Sam
ca
Eo
�?
ac
o'
0
U�
feet
square feet total
side/108 square feet total
400-599 feet
A sign permit is required for the installation of a new freestanding sign. In most circumstances the City only allows new
freestanding signs to be monument style signs. Certain large premises that have gone through the Master Sign Program are
eligible for grand monument signs. Information on installing a new freestanding sign is found in SECTION 1 of this
application. Information on installing new grand monument signs can be found in SECTION 2 of this application.
A sign permit is also required for any proposed reface or copy change to an existing freestanding sign in the City. In some
cases a reface or copy change of an existing freestanding sign requires that the sign be removed. Information on completing a
reface or doing a copy change to an existing freestanding sign can be found under SECTION 3 of this application.
Total Length of Street Frontage Along All Streets: 3 r
Does the site front on more than one street, but have less than 800 feet of linear frontage, combined on O
both streets?
Is the site use a mufti-familymufti-famfly or institutional use in a residential Zone (LDR, MDR, or HDR)? )U
?List existing Si ns
M.IAtt ffid IM ®V -
Section 1- New Freestanding Signs
Freestanding Signs in Commercial/Industrial Zones
Each premise is permitted to have one freestanding -monument style sign. Additional monument signs are permitted based on
the total amount of linear street frontage along the premise. Table 1 below outlines the development standards and total number
of signs permitted for most premises.
Total ROW of
Allowable Sign Message Area
Total Allowable
Maximum
Premise
Sign Size 3
Height
Number of Signs
Less than 400
36 square feet per side/72
54 square feet per
6 feet
One
feet
square feet total
side/108 square feet total
400-599 feet
50 square feet per side/100
70 square feet per
7 feet
One
square feet total
side/ 140 square feet total
600-799 feet
60 square feet per side/ 120
80 square feet per
7 feet
One
square feet total
side/ 160 square feet total
800-999 feet
66 square feet per side/132
88 square feet per
8 feet
Two
square feet total
side/ 176 square feet total
1,000 feet and
72 square feet per side/144
96 square feet per
8 feet
One for every 400 feet
over
square feet total
side/192 square feet total
of linear street frontage.
General Requirements for Monument Signs in Commercial and Industrial Zones
Setback All monument signs shall be placed at a minimum of five feet from all property lines; however no sign taller
than three feet shall be placed within the sight distance triangle, unless it can be demonstrated the sign will not pose a
safety risk by reducing visibility for motorists turning out into traffic.
Maximum Width. The maximum width permitted for any new monument sign is 15 feet,
Address Requirement. All new freestanding signs shall have the address number or address range of the premise
listed on the structure. The address shall not be counted toward the allowable sign message area limit. Address
numbers must be plainly legible and visible from the street fronting the property. The address numbers must contrast
with the sign background. Address numbers shall be Arabic numerals or alphabet letters. Numbers shall be a
minimum of four inches high with a minimum stroke width of 1.5 inches.
Corner Properties
Some comer properties may qualify for more than one monument sign, even if they have a limited amount of street frontage. A
property that borders on more than one public street, but has less than 800 total feet of linear frontage, is permitted to have one
monument sign per street if the following criteria are met:
1. The property has a least 200 feet of frontage on each public street where a sign will be placed;
2. Each public street provides direct access to the property; and
3. For each separate street frontage Table 1 listed above shall be used to determine the design standards for any proposed
monument sign.
'The allowable message area is either the face pane of the sign, or for channel letters or signs painted on seating or retaining walls, that portion of the sign devoted to
the actual message , logo, or business name.
' Total size is the entire area of the sign, including the support structure.
10
CITY OF TUKWILA
Department of Community Development
6300 Southeenter Boulevard, Tukwila, WA 98188
Telephone: (206) 431-3670
PERMANENT SIGNS
Building and
Free -Standing / Monument
Short Form —
COMMERCIAL ZONE
lIATT v
FOR STAFF USE ONLY
Planner:
File Number.
Associated File Numbers:
Needs Electrical: Yes/No
Name
w� 04 (14
Name
Address of Sign
Address
<
City, State, Zip
Y
CF—i" (v►g102-(z)S reepOk 60 W? 9 s-93
Contact Email address Contact Phone number
�v�ieo � �'a9 v�Ir�c cook �
Contractor W Contractor State License # Contractor's rity of Tukwila Business Lie #
Contractor Address o C*0 rT bo (gz� City St Zip 5���� L',(/ f ,7e1 !-7
REQUIRED FOR SIGN A PPLICA TION
O Valid Tukwila business license number for the sign contractor.
O One copy of a valid Washington State Contractor's license, or owner's affidavit
I HEREBY CERTIFY that the information contained in this application and the materials furnished to the City by me are true.
understand that if I provide incorrect inpoation on this application or submit plans that are not correct, it could delay issuance
of ape nit or, if the permit has been i ue , be cause for .t to revo�-* the sign permit.
,v
a Sig ure of Ow er or Au orized Ag t
The City will send any official notic , letters, and other official notices via email. If you wish to receive all official
communications from the City vi S Postal Mail, check here:
�} Completed and signed application (this form).
Application fee listed in current Fee Schedule
Two copies of a dimensioned and scaled site plan showing property lines, streets, buildings and parking areas; the
location of all existing building mounted or freestanding signs on the same building/parcel as the proposed signs.
Two copies of scaled and dimensioned drawings of the proposed sign or signs with area calculations.
Two copies of a scaled elevation of the building walls where the signs will be located indicating the location and
dimensions of the exposed building face used to calculate the sign area.
Method of illumination, if proposed. W<D }p --t2,44L"I
Method of support and attachment for building -mounted signs.
Structural calculations if the sign weighs over 400 pounds.
Scaled and dimensioned footing designs and height calculations. Footing designs are not required for reface or copy
changes to an existing freestanding sign, provided there is no change in the sign height, area or location.
Structural calculations if the sign has an area greater than 50 square feet and/or is taller than 15 feet. This requirement
may be waived for certain refaces or copy changes to existing freestanding signs.
Total number of Building Mounted Signs included in this application: C,QD
TEXT on Sign (Must also be shown accurately on plans) Aim, m, r- ,ed 3 cq,S / A_Q_ s3 eewfi e-
Total number of Freestanding/Monument Signs included in this application:L� Q� (sal, M - i41 iii
TEXT on Sign (Must also be shown accurately on plans) C7 �"'
Scale: 1/4" = 1'
PROPOSED SIGN AREA:
32.0 Sq. Ft.
ALLOWABLE:
36.0 Sq. Ft.
PROPOSED OVERALL AREA:
48.0 Sq. Ft.
ALLOWABLE:
72.0 Sq. Ft. 7"
lE
M
Plan View
Scale: 1/2" = F
AOW: -S-63"
we,��hs c
36
; `
�
oejr
eS ril 30, 2015
Proposed DF Non -Illuminated Monument Sign
Scale: 1/4" = 1'
Radius vertical 81- 0" l
suppo
13
7 1/2" 4 1
5 1 /2"L2 1
Side View DF Non -Illuminated Monument Sign A
Scale: 1/2" = 1' Scale: 1/2" = 1'
Remove and dispose of one (1) existing double-fac
non -illuminated monument sign.
Fabricate and install one (1) new double -face, non -
Illuminated monument sign.
BODY:
- 4'x 8' SignComp Series 7 hinge body
- Flush -edge, flat aluminum background face(s)
- Paint to match as follows:
- Top area: Match Blue PMS 288 C, semi -gloss
- Horizontal stripe: Black, semi -gloss
- Tenant panel area: Match 3M/Gerber `Traffic
220-151 vinyl, semi -gloss
- "AIRFIELD" letters: 1/2" thick, FCO White acrylic
- "BUSINESS CENTER" letters: 1/4" thick, FCO Wh
acrylic
- Fasten all letters flush to sign faces
i
0
ccQ
-.125" Thick aluminum tenant panels
- Paint to match 3M/Gerber'Traffic Gray' 220-151 vinyl,
semi -gloss
- All tenant copy: White vinyl
- Attach panels flush to background face(s) with
square -drive silver pan head screw fasteners
BASE/FILLER AREA:
- 2'x 8' Flat aluminum
- Paint to match 3M/Gerber'Traffic Gray' 220.151 vinyl,
semi -gloss
SUPPORT:
- SignComp Series 7 radius vertical supports at each end
- Natural aluminum finish, polished and clear -coated
- Drill and install rivets
- Direct bury vertical supports into concrete footings O
- See Page 6 for footing details/drawings !s, 50-,. 00 2V
WO #: 12558
Est. #: 15624
Design #: 14-281
File: 12558—Airfield Business
Center - PERM
Client: Airfield Business Center
Address: 9100 E Marginal Way S
Tukwila, WA 98108
Date: 04 3015
Rev. Date:
Design Date: Ol 07 15 (V3)
Sales: Kevin Tinker
AN: Craig Gatch
Design: David Mau
APPROVAL:
Landlord:
Client:
Notes:
s iperG"WIGS
a division W GM Nameplate
220115th Ave. West
Seattle, Washington
98119
Phone: 206.352.5032
Toll Free: 800.219.8784
Fax:206.284.8510
#www.supergraphics.com
.iTcopyrlghts toartwork and other image content are the
sole property of the creator(,). No items on this page
shall be reproduced without prior consent, verbal and/or
written. All other items contained herein are the sole
Property of GM Nameplate and/or it's subsidiaries.
O 2015 GM Nameplate / Supe,Graphics all rights reserved.
Tho si , indicated id this design is fabricated to
�
meet M rmenmns; 8 v 9 be labeled according to
W In
'U
to stalled in accordance with
®L.` Coda%aot>� bcN oGeowl Electrical
"'^^" Thiz in<Wdes grsper groundiiy aM lwrWag of thesigrt
rM.P`F' 1 e i? (D
L
End View:
Scale: 1/2" = 1'
Crosshairs indicate wall
attachment locations.
II
1 /2" 5'- 11 3/4"
SF Non -Illuminated Wall Sign I:_%
Scale: 1/2" = 1'
Remove and dispose of one (1) existing single -face,
non -Illuminated wall sign.
Fabricate and install one (1) new single -face, non-®
Illuminated wall sign. W
BODY: >
-1"x 1" Aluminum square tube frame Moon
- .090" Aluminum flat face, flush to frame edges ui
- Paint to match as follows:
- Top area: Match Blue PMS 288 C, semi -gloss LU
- Horizontal stripe: Black, semi -gloss
- Tenant panel area: Match 3M/Gerber `Traffic G'
220-151 vinyl, semi -gloss
Divider stripes: Black vinyl
- NOTE: Colors wrap around top, bottom, and ends
April 30, 2015
WO #: 12558
Est. #: 15624
Design #: 14-281
File: 12558—Airfield Business
Center - PERM
Client: Airfield Business Center
Address: 9100 E Marginal Way S
Tukwila, WA 98108
Date: 04 30 15
Rev. Date:
Design Date: 01 07 15 (V3)
Sales: Kevin Tinker
AM: Craig Gatch
Design: David Mau
APPROVAL:
Landlord:
Client:
Notes:
superGraphics
a division of GM Nameplate
220115th Ave. West
Seattle, Washington
98119
Phone: 206.352.5032
Toll Free: 800.219.8784
Fax:206.284.8510
www.supergraphics.com
Copyrights to artwork and other image content are the
sole property of the creator(s). No items on this page
shall be reproduced without prior consent, verbal and/or
written. All other Items contained herein are the sole
property of GM Nameplate and/or it's subsidiaries.
- "AIRFIELD" letters: 1/2" thick, FCO White acrylic 02015 GM Nameplate/ Sup,,Graphics all rights reserved.
- "BUSINESS CENTER" letters: 1/4" thick, FCO White .hes�gn,ge Indicated the design is fabricated to
t UL requirements awn be labeled ,.cora ng to
,1 , ag UL.'.. nes
acrylic �� U� This sign Is intended [o cl inrtalledh with
- All tenant copy: White vinyl �� DO ® this thddesproa A',ri Eng oft he Natig of the sign.
(� a...w� mCo°ieem°<°iuda :°`a°r�err s ol�;`nei�9 era t`oo°gae�g of the sign.
- Fasten all letters flush to sign face IS
ATTACHMENT:
- Fasten flush to exterior wall with hidden mounting
brackets and mechanical fasteners as required
- See Page 6 for attachment detail drawing
18 1/4"1:
12 3/4
3'- 10"
10 1/2"
6 3/8-L
8 3/8"
3 3/4'L
1/2'
8 3/8"
3 3/4'L
End View:
Scale: 1/2" = 1'
Crosshairs indicate wall
attachment locations.
II
1 /2" 5'- 11 3/4"
SF Non -Illuminated Wall Sign I:_%
Scale: 1/2" = 1'
Remove and dispose of one (1) existing single -face,
non -Illuminated wall sign.
Fabricate and install one (1) new single -face, non-®
Illuminated wall sign. W
BODY: >
-1"x 1" Aluminum square tube frame Moon
- .090" Aluminum flat face, flush to frame edges ui
- Paint to match as follows:
- Top area: Match Blue PMS 288 C, semi -gloss LU
- Horizontal stripe: Black, semi -gloss
- Tenant panel area: Match 3M/Gerber `Traffic G'
220-151 vinyl, semi -gloss
Divider stripes: Black vinyl
- NOTE: Colors wrap around top, bottom, and ends
April 30, 2015
WO #: 12558
Est. #: 15624
Design #: 14-281
File: 12558—Airfield Business
Center - PERM
Client: Airfield Business Center
Address: 9100 E Marginal Way S
Tukwila, WA 98108
Date: 04 30 15
Rev. Date:
Design Date: 01 07 15 (V3)
Sales: Kevin Tinker
AM: Craig Gatch
Design: David Mau
APPROVAL:
Landlord:
Client:
Notes:
superGraphics
a division of GM Nameplate
220115th Ave. West
Seattle, Washington
98119
Phone: 206.352.5032
Toll Free: 800.219.8784
Fax:206.284.8510
www.supergraphics.com
Copyrights to artwork and other image content are the
sole property of the creator(s). No items on this page
shall be reproduced without prior consent, verbal and/or
written. All other Items contained herein are the sole
property of GM Nameplate and/or it's subsidiaries.
- "AIRFIELD" letters: 1/2" thick, FCO White acrylic 02015 GM Nameplate/ Sup,,Graphics all rights reserved.
- "BUSINESS CENTER" letters: 1/4" thick, FCO White .hes�gn,ge Indicated the design is fabricated to
t UL requirements awn be labeled ,.cora ng to
,1 , ag UL.'.. nes
acrylic �� U� This sign Is intended [o cl inrtalledh with
- All tenant copy: White vinyl �� DO ® this thddesproa A',ri Eng oft he Natig of the sign.
(� a...w� mCo°ieem°<°iuda :°`a°r�err s ol�;`nei�9 era t`oo°gae�g of the sign.
- Fasten all letters flush to sign face IS
ATTACHMENT:
- Fasten flush to exterior wall with hidden mounting
brackets and mechanical fasteners as required
- See Page 6 for attachment detail drawing
"�'s • Y'�„ 1 { k •� r n Y - -j^ S . ,-t ,y rot t
✓ I C Fi L t F ` v r �sr t9if r- L ti i7 + c
� Y.tq� ' w �. .7 s� } �,� tit-.� s t i, t.- .! .> Vit, � > x •tr. c
��C.oi;�' .y„ r,ya}��r24:�.y itij sty , •J ..r ii •fft/l(i,'f R s,. �r4 `! t •�,~' S., �`.�YrJ... Vjr
*�fi
7� �"L,.t "�'t•'..,,. j i ,ri j� _ f
'. _At -r .A.,�,.xTJ1 �1. {S �`Y,.�..,::5"',r{•r� i11 ; y-
r
vi r -✓`',y . ! `ti"se,;' �i.> 1 'L,�'Z r _ k f +, .-r -. • t y: _
! ✓ i r; t; `
� �3-.4.7? *�t �.r: •4 rf� ��. � _:,•. '' x�ir!iv .4"G.Y .'.ta ,a c'iwncb� :� i ` � cti � 4 x { -
�. .VRv
v`F++ i1�,,� �i'Y J(,'f" �: {. l.C-4 iC i• �f c �1- �'.
VS,
t
fis':+c key �•r ;�C^'��.'` �h •d :•�,�t{ e . "O;a°- t .s' J� .f,'•r� f �N �.. '�' " ra ..{ { s
I rr.
r�'rCtr , rf. J. 2 ,y- .1r4�ft i1f i . ! r•.��. - »-:,'. •ti F
O-N-,
t,.�s+s��,�e`�:..e�,�i^t•��S}�"�••.�•r,�,'.�}+f- f�!ti��al���isf� "•�t"t'i:.!S`'�`S"'�''.Y•.C� yrp;ty�1r�; }j_
!t.`���.t'�.tS`�,�jF.. "'a�`t�:4'ti": '�' w�! .'C 4����1�' a'_�r' - YC=� •td$�e.'" r ( �_.t 'Y.f i h'�u �1. t rlY.. �J
;�% �,,....a.�_..'1.r....,:N,r N'._..`_�J-.K`..z.: .:k-e�:.. r. -.•s '. .,..%- c-.�"a..R:.n
> Tenant arae
Trinity ERD
Metal Shortsz
Tenantw•3� " 1. <n •� "`r Ln,y lsl ♦ ,r s .ta ..�� •
• t t �...r.. s. F^f-- i,n L.-lr.4rr4' ai?,' ,. k.,eZF i�. �..�� ' s rtz � 1�'. .awl { t 7`5,;�
' G 4c. ..rr>, ..{ 5 .''.r��,.r'l .� '�r ��S""t �'i .y � ` ��r!' •y?�, �,�ti t Y � I r:•^. •-i c- et�`2^ •+i^ �
j ! i 3�•< '�y4 �.r.. i .s�' y �.•,, '7��5 �'.� +�''t,` _ ��i".. � � . i �-s�' l•-�� � • r i • r,J` �i'+ . 1+ 'y +'"�.
. ►!" e i a I ��f� ii f kf
�� --�. —�_, "� Y> �� �'„ y' '�`� i��.ka r^�•�l',f�2�� �i Sof ATS-t4'�'� } - a �7� >�'� s � .� . "YF� i {
_ J +�x...-s.�a'3ia ;s ;e I ® ,•3'. �• > "-rt{yS. s
1 -' -' — '>1 tr t�T�+.. '""7'{e�,£�-�R+.J^,jyy � r fi�y •,'�'� � 5�;� r�;, s . r_ /rte � �, .r w � . � r� ��> � i { t
a . - • , _-'_.-.. �V a �` >>„ T � biro? r ��•�.�� - .n � art _ __ _ _ _ � ff ' � P� y Sa'. •
'- ' s ' � �t(" 1. s ,j`����-�.rr�i y.-.. � r. ., }�+ r CF T�.TY t� T •;4. �.;
r ..��,,:7. ='..^` A - t. ,'".,� `. `'' +�.s• - f> ' kc S: ky' Ca`S=i'. ks,.._-.: " ..r s IOs�, " L7" {ncsc I
.�� AC- _
C
Tenant
Trinity ERD
Metal Shorts
Tenant
an
cra
%l4
AIRFIELD._
BUSINESS CENTER
.=.amrW-1ri.
- Fasten flush to exterior wall with hidden mounting �' ; ' - •
SF Non -illuminated Wall Sign brackets and mechanical fasteners as required
SITE PLAN
Scale: 1"= 60'
Sly-Oa?v
fi..
V
N
/lC
w Q)
F`Cx
Ito O
..
CEJ
E O
UJ
0
C
OE
Pi
Cr.(a
0-
> C
,- O
a.
(D 0_-
Q
-O 'j
�
2!
O C13
U �0
C
;;p
co =
A
Z
� a� •C
V
cri td
U
of
>L m
CL ca
z�'
as
Sly-Oa?v
fi..
V
N
/lC
w Q)
F`Cx
..
CEJ
E O
:-
OE
Pi
April 30, 2015
WO #: 12558
Est. #: 15624
Design #: 14-281
File: 12S58—Airfield Business
Center - PERM
Client: Airfield Business Center
Address: 9100 E Marginal Way S
Tukwila, WA 98108
Date: 04 30 15
Rev. Date:
Design Date: 01 07 15 (V3)
Sales: Kevin Tinker
AM: Craig Gatch
Design: David Mau
APPROVAL:
Landlord:
Client:
Notes:
a division of GM Nameplate
220115th Ave. West
Seattle, Washington
98119
Phone: 206.352.5032
Toll Free: 800.219.8784
Fax:206.284.8510
www.supergraphics.com
Copyrights to artwork and other image content are the
sole property of the creator(s). No items on this page
shall be reproduced without prior consent, verbal and/or
written. All other Items contained herein are the sole
property of GM Nameplate and/or It's subsidiaries.
O 2015 GM Nameplate / SuperGraphics all rights reserved.
The signage Indicated In NIs design is fabd to
rldite
I m t UL requlrements 8 win be labeled according to
=ag ULguidatinas.
This sign Is Untended to he Imtalled in accordance with
® Ne rapuirements of Article 500 of the NadorW F]ectrkal
Th s Includes proper 9 ou
Al�rWin9 aMlbco�Mi� of tt�e Ngn.
18'
ONEW SIGN
LOCATION
20'
QI
60'
NORTH BUILDING - West Elevation
Scale: 3/32" = 1'
BUILDING WEST FACADE AREA: PROPOSED SIGN AREA: ALLOWABLE SIGN AREA:
1,080.0 Sq. Ft. 46.0 Sq. Ft. 48.2 Sq. Ft.
110' (West)
NEW SIGN
LOCATION
ILDING FACADE/ SIGN AREA
LCULATIONS:
K 60'= 1,080 Sq. Ft.
60 - 500 = 580 x .04 = 23.2 Sq. Ft.
5 Sq. Ft. = 48.2 Sq. Ft. Allowed
SOUTH BUILDII
Scale: 3/32" = 1'
- West Elevation
BUILDING WEST FACADE AREA:
2,200.0 Sq. Ft.
I BUILDING FACADE / SIGN AREA
PROPOSED SIGN AREA: ALLOWABLE SIGN AREA: CALCULATIONS:
25.0 Sq. Ft. 86.0 Sq. Ft. 20'x 110'= 2,200 Sq. Ft.
i 2,200 -1,500 = 700 x .03 = 21
+ 65 Sq. Ft. = 86.0 Sq. Ft. Allowed
I
N
tt� O E
W c0 E o
April 30, 2015
WO #: 12558
Est. #: 15624
Design #: 14-281
File: 12SS8 Airfield Business
Center - PERM
Client: Airfield Business Center
Address: 9100 E Marginal Way S
Tukwila, WA 98108
Date: 04 30 15
Rev. Date:
Design Date: 0107 15 (V3)
Sales: Kevin Tinker
AM: Craig Gatch
Design: David Mau
APPROVAL:
Landlord:
Client:
Notes:
superGwap'�t�cs
a division of GM Nameplate
220115th Ave. West
Seattle, Washington
98119
Phone: 206.352.5032
Toll Free: 800.219.8784
Fax:206.284.8510
www.supergraphics.com
Copyrights to artwork and other Image content are the
sole property Of the creator(s). No Items on this page
shall bereproduced without prior consent, verbal and/or
written. All other Items contained herein are the sole
property of GM Nameplate and/or It's subsidiaries.
412015 GM Nameplate / SuperGraphics all rights reserved.
Tip sgnag. Indicated In this design Is t.IsrMated to
t Ul raealrements 6 w w tabstad amvding to
this Wtlpnd
ed to a instagad in aawrdanw M.
® the redulromenn of Artkla 6004the NawwFbttMal
MS YxWdas w wora�me � lmdm" ver the.10 .
CD
CO
.0
®
s.+ E
U
>
®U
m�
v—
Cd >O
®,.
r-
0-.0
-�•>
as ....e
_
•�
C C
co
(L
V r- LL
O
o.
CL
CL
SOUTH BUILDII
Scale: 3/32" = 1'
- West Elevation
BUILDING WEST FACADE AREA:
2,200.0 Sq. Ft.
I BUILDING FACADE / SIGN AREA
PROPOSED SIGN AREA: ALLOWABLE SIGN AREA: CALCULATIONS:
25.0 Sq. Ft. 86.0 Sq. Ft. 20'x 110'= 2,200 Sq. Ft.
i 2,200 -1,500 = 700 x .03 = 21
+ 65 Sq. Ft. = 86.0 Sq. Ft. Allowed
I
N
tt� O E
W c0 E o
April 30, 2015
WO #: 12558
Est. #: 15624
Design #: 14-281
File: 12SS8 Airfield Business
Center - PERM
Client: Airfield Business Center
Address: 9100 E Marginal Way S
Tukwila, WA 98108
Date: 04 30 15
Rev. Date:
Design Date: 0107 15 (V3)
Sales: Kevin Tinker
AM: Craig Gatch
Design: David Mau
APPROVAL:
Landlord:
Client:
Notes:
superGwap'�t�cs
a division of GM Nameplate
220115th Ave. West
Seattle, Washington
98119
Phone: 206.352.5032
Toll Free: 800.219.8784
Fax:206.284.8510
www.supergraphics.com
Copyrights to artwork and other Image content are the
sole property Of the creator(s). No Items on this page
shall bereproduced without prior consent, verbal and/or
written. All other Items contained herein are the sole
property of GM Nameplate and/or It's subsidiaries.
412015 GM Nameplate / SuperGraphics all rights reserved.
Tip sgnag. Indicated In this design Is t.IsrMated to
t Ul raealrements 6 w w tabstad amvding to
this Wtlpnd
ed to a instagad in aawrdanw M.
® the redulromenn of Artkla 6004the NawwFbttMal
MS YxWdas w wora�me � lmdm" ver the.10 .
0
Ria"I
3'- 0'
18" Footing 6'- 9 1/2" 18" Footir
91, a
Footing
911:'
•o • v o • a•
plan View
Scale: 1/2" = 1'
18I F f
Side View
Scale: 1/2"/2" = 1'
4'-
2' 0"
3'- 0"
13
7 1/2"
8' 0"
Cie:
6n1
18" Footing 18" Footing
DF Non -Illuminated Monument Sign
Scale: 1/2" , 1' _
{
J!
f
' tl
I�
P
4�.
PLANNING APPROVED
No changes can be made. to these
plans without approval from the
Planning Division of DCD
Approved. By: ,.
Date:
SIGN / SUPPORT SPECIFICATIONS:
POLES (2):
SignComp Series 7 radius vertical semi -circular supports
- 7" diameter, section measurement approx. 3 1/2"x 7"
- Embed into concrete footing, leaving 6"clearance from
bottom
FOOTINGS (2):
- 18" (Diameter) x 3'-0"(H) Concrete
Screw
fasteners
.090" Aluminum
sign face
1" Aluminum
square tube
NOTES:
UJ
L" ,
- See Page 1 for detailed monument sign design,
>
N
-
dimensions, and specifications.
LLJ
- -points along top—
E o
(Sign B), and
0
CZ
EZ
points along top
LLJ
4
Uo
CC
Screw
fasteners
.090" Aluminum
sign face
1" Aluminum
square tube
sign frame
3/8" Rated
Expansion Bolts
into concrete
Z
@ 4 attachment
(7
- -points along top—
-�
(Sign B), and
@ 2 attachment
points along top
(Sign C)
Continuous
11/2" Aluminum
angle mounting
bracket
BLDG.
Attachment Detail •- Wall Signs
Scale: 1/4" 1'
NOTES:k3/5'
- See Pages 2 and 3 for detailed wall sign designs,
dimensions, and specifications.
April 30, 2015
WO #: 12558
Est. #: 15624
Design #: 14-281
File: 12558 Airfield Business
Center - PERM '
Client: Airfield Business Center
Address: 9100 E Marginal Way S
Tukwila, WA 98108
Date: 04 30 15
Rev. Date:
Design Date: 01 07 15 (V3)
Sales: Kevin Tinker
AM: Craig Gatch
Design: David Mau
APPROVAL:
Landlord:
Client:
Notes:
S�rAI'�1"ap:'11C5
a division of GM Nameplate
220115th Ave. West
Seattle, Washington
98119
Phone: 206.352.5032
Toll Free: 800.219.8784
Fax:206.284.8510
www.supergraphics.com
copyrights to artwork and other Imago content are the
sole property of thecrestor(s). No Items on this page
shall be reproduced without prior consent, verbal and/or
written. All other Items contained herein are the sole
property of GM Nameplate and/or It's subsidiaries.
02015 GM Nameplate / SuperGraphlcs all rights reserved.
SM)l
TI- signega l, -td & Nb dnlgn h labdrom to
t ULraou4aments 6 vdp ba bpld acowpingYUL upas anes.This sign b IntIw reWlrem¢na at Ar[Mu 600 of the NMIaW EIxvMal
Nf Intl E s WOp�er 9r g and nd b`ondlining of m. WM1