HomeMy WebLinkAboutPermit M17-0092 - CLEAR SIGN - RTUSThis record contains information which is exempt from public disclosure
pursuant to the Washington State Public Records Act, Chapter 42.56 RCW
as identified on the Digital Records Exemption Log shown below.
M17-0092
CLEAR SIGN
12870 INTERURBAN AVE S
THE ABOVE MENTIONED
Page #
DIGITAL
Code
RECORDS
PERMIT FILE INCLUDES
Exemption
(DR) EXEMPTION LOG
THE FOLLOWING REDACTED INFORMATION
Brief Explanatory Description
StatutelRule
Personal Information —
The Privacy Act of 1974 evinces Congress'
intent that social security numbers are a private
concern. As such, individuals' social security
numbers are redacted to protect those
Social Security Numbers
individuals' privacy pursuant to 5 U.S.C. sec.
5 U.S.C. sec.
DR1
Generally — 5 U.S.C. sec.
552(a), and are also exempt from disclosure
552(a); RCW
552(a); RCW
under section 42.56.070(1) of the Washington
42.56.070(1)
42.56.070(1)
State Public Records Act, which exempts under
the PRA records or information exempt or
prohibited from disclosure under any other
statute.
Redactions contain Credit card numbers, debit
card numbers, electronic check numbers, credit
Personal Information —
expiration dates, or bank or other financial
RCW
78
DR2
Financial Information —
RCW 42.56.230(4 5)
account numbers, which are exempt from
disclosure pursuant to RCW 42.56.230(5),
except when disclosure is expressly required by
or governed by other law.
42.56.230(5)
Personal Information —
Driver's License. RCW
Redactions contain information used to prove
RCW
DR3
—
identity, age, residential address, social security
42.56.230 (7a
42.56.230
(7a & c)
number or other personal information required to
apply for a driver's license or identicard.
& c)
Redacted content contains a communication
between client and attorney for the purpose of
obtaining or providing legal advice exempt from
RCW
DR4
Attorney -Client Privilege —
RCW 5.60.060(2)(a); RCW
disclosure pursuant to RCW 5.60.060(2)(a),
which protects attorney-client privileged
5.60.060(2)(a);
RCW
42.56.070(1)
communications, and RCW 42.56.070(1), which
protects, under the PRA, information exempt or
prohibited from disclosure under another statute.
42.56.070(1)
CLEAR SIGN
12870 INTERURBAN AVE S
EXPIRED
04/10/18
MI 7-0092
Parcel No:
Address:
City of Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206-431-3670
Inspection Request Line: 206-438-9350
Web site: http://www.TukwilaWA.gov
MECHANICAL PERMIT
2716000010 Permit Number:
12870 INTERURBAN AVE S
Project Name: CLEAR SIGN
Issue Date:
Permit Expires On:
M 17-0092
7/20/2017
1/16/2018
Owner:
Name:
Address:
EPROPERTY TAX INC DEPT #207
PO BOX 4900 , SCOTTSDALE, WA,
85261
Contact Person:
Name: DAWNA PETET
Address: 899 W MAIN ST, AUBURN, WA, 98001
Contractor:
Name: IECS INC
Address: PO BOX 19252 , SEATTLE, WA, 98109-
1252
License No: IECS***044QL
Lender:
Name:
Address:
Phone: (253) 939-9495
Phone: (206) 939-9495
Expiration Date: 11/20/2018
DESCRIPTION OF WORK:
REPLACE EXISTING RTU'S #11, 12, 13, 15 WITH NEW CARRIER SAME SIZE RTU'S
Valuation of Work: $30,330.00
Type of Work: REPLACEMENT
Fuel type: GAS
Fees Collected: $610.58
Electrical Service Provided by: SEATTLE CITY LIGHT
Water District: TUKWILA
Sewer District: TUKWILA
Current Codes adopted by the City of Tukwila:
International Building Code Edition:
International Residential Code Edition:
International Mechanical Code Edition:
Uniform Plumbing Code Edition:
International Fuel Gas Code:
2015 National Electrical Code:
2015 WA Cities Electrical Code:
2015 WAC 296-46B:
2015 WA State Energy Code:
2015
2014
2014
2014
2015
Permit Center Authorized Signature:4
'per ih n4,,
Date:1 . 71° 11
I hearby certify that I have read and examined this permit and know the same to be true and correct. All
provisions of law and ordinances governing this work will be complied with, whether specified herein or not.
The granting of this permit does not presume to give authority to violate or cancel the provisions of any other
state or local laws regulating construction or the performance of work. 1 am authorized to sign and obtain this
development permit and agree to the conditions attached to this permit.
Signature:!icaVV ''
Print Name: ���F{J1 n : ) elZ
This permit shall become null and void if the work is not commenced within 180 days for the date of issuance, or if
the work is suspended or abandoned for a period of 180 days from the last inspection.
PERMIT CONDITIONS:
1: ***MECHANICAL PERMIT CONDITIONS***
2: All mechanical work shall be inspected and approved under a separate permit issued by the City of Tukwila
Permit Center (206/431-3670).
3: All permits, inspection record card and approved construction documents shall be kept at the site of work
and shall be open to inspection by the Building Inspector until final inspection approval is granted.
4: Manufacturers installation instructions shall be available on the job site at the time of inspection.
PERMIT INSPECTIONS REQUIRED
Permit Inspection Line: (206) 438-9350
0703 MECH EQUIP EFF
1800 MECHANICAL FINAL
0609 PIPE/DUCT INSULATION
0705 REFRIGERATION EQUIP
0701 ROUGH -IN MECHANICAL
CITY OF TUKWILA
Community Development Department
Permit Center
6300 Southcenter Blvd., Suite 100
Tukwila, WA 98188
http://www.TukwilaWA.gov
Mechanical Permit No. M f o to--
Project No.
Date Application Accepted: lQ 2A 11
Date Application Expires: h
(For office 1J a only)
MECHANICAL PERMIT APPLICATION
Applications and plans must be complete in order to be accepted for plan review.
Applications will not be accepted through the mail or by fax.
**please print**
SITE LOCATION
A. Cc>(y, Center-
Site Address: 1 ag 10 ;Th-l-er urban
Y
Tenant Name: Ci ( t1,& S lc9X)
PROPERTYOWNER
/� "� j����
Name: t?i jlil i oyee<! l �I�eLu.- Ulf U.1 l 739?
y
Address: fa(�, 70 � .4e,03 D e_,
City: f i/ e/ n `f _ State: A Zipq,g,, p
CONTACT PERSON — person receiving all project
communication
DName:
aWnt► ?/-k �C , .
Address: gq9 lJ U11 i., (
City: /�1 IA/ 1c+
Ul rk'lState: (kk\,4_ zipzmo
b i
Phone: 5.3 _939.4 Max: (26.3 _[i': —9 6 9
Email:
614ulna ll@,Sea. me-1-ykRtca) , 1'nyv,
King Co Assessor's Tax No.:I 7 .//0 ® ()DOI
Suite Number: Floor:
New Tenant: ❑ Yes ..No
MECHANICAL CONTRACTOR INFORMATION
Company Name:cOQ,('am y_ chew;
ew;capTc
Address: gqq r Qhsi
City:„ it/
State: l A A Zip:q sop
.
Phone: a53,9,x'7_7o lax: ;75.3'7.7/'9,3 6a0l
Contr Reg No.:1E6 * 95,14otp Date: I I _ a 04,
Tukwila Business License No.: bus _ 6 qcn.q i
1
Valuation of project (contractor's bid price): $ ? n D
Describe the scope of work in detail: / 51-1 R is . ) f j 12_113,4 IS u%i-1 („ � ..
Ccs 5Ce bb& -1-ifs
Use: Residential: New 0 Replacement ❑
Commercial: New ❑ Replacement
Fuel Type: Electric
Gas
Other:
H: Applications\Forma-Appliwions On Line \2016 ApplicatioasVdxhanical Panit Application Revised 1-4-16.docx
Revised: January 2016
hh
Page 1 of 2
Indicate type of mechanical work being installed and the quantity below:
Unit Type
Qty
Furnace <100k btu
Residential, Nighttime
Furnace >100k btu
Industrial
Floor furnace
55 dB(A)
Suspended/wall/floor
mounted heater
57 dB(A)
Appliance vent
Conunercial
Repair or addition to
heat/refrig/cooling
system
L
i `
Air handling unit
65 dB(A)
<10,000 cfm
60 dB(A)
Noise:
Unit Type -
Qty
Air handling unit
Residential, Nighttime
>10,000 cfm
Industrial
Evaporator cooler
55 dB(A)
Ventilation fan
connected to single duct
57 dB(A)
Ventilation system
Conunercial
Hood and duct
L
i `
Incinerator — domestic
65 dB(A)
Incinerator —
comm/industrial
60 dB(A)
Unit Type
Qty
Fire damper
Residential, Nighttime
Diffuser
Industrial
Thermostat
55 dB(A)
Wood/gas stove
57 dB(A)
Emergency generator
Conunercial
Other mechanical
equipment
L
i `
60 dB(A)
65 dB(A)
Boiler/Compressor
Qty
0-3 hp/100,000 btu
Residential, Nighttime
3-15 hp/500,000 btu
Industrial
15-30 hp/1,000,000 btu
55 dB(A)
30-50 hp/1,750,000 btu
57 dB(A)
50+ hp/1,750,000 btu
Conunercial
57 dB(A)
47 dB(A)
60 dB(A)
65 dB(A)
Mechanical units need to be in compliance with the Tukwila Noise Code. Maximum permissible sound levels are based on from where the sound is
created and where the sound is heard. Additionally, if sound can be heard from within a house at night in a residential zone it may not be allowed.
For more details, see TMC 8.22
*Daytim
District of Sound
Producing Source
District of Receiving Property
Residential, Daytime*
Residential, Nighttime
Commercial
Industrial
Residential
55 dB(A)
45 dB(A)
57 dB(A)
60 dB(A)
Conunercial
57 dB(A)
47 dB(A)
60 dB(A)
65 dB(A)
Industrial
60 dB(A)
50 dB(A)
65 dB(A)
70 dB(A)
A few sounds are exempt from the noise code, including:
• Warning devices;
• Construction and property maintenance during the daytime hours (7am-lOpm);
• Testing of backup generators during the day.
PERMIT APPLICATION NOTES -
Value of construction — in all cases, a value of construction amount should be entered by the applicant. This figure will be reviewed and is subject
to possible revision by the permit center to comply with current fee schedules.
Expiration of plan review — applications for which no permit is issued within 180 days following the date of application shall expire by limitation.
The building official may grant one extension of time for additional periods not to exceed 90 days each. The extension shall be requested in writing
and justifiable cause demonstrated. Section 105.3.2 International Building Code (current edition).
I HEREBY CERTIFY THAT I HAVE READ AND EXAMINED THIS APPLICATION AND KNOW THE SAME TO BE TRUE UNDER
PENALTY OF PERJURY BY THE LAWS OF THE STATE OF WASHINGTON, AND I AM AUTHORIZED TO APPLY FOR THIS PERMIT.
BUILD G R OR A 1MAGENT:
Signature: l W P Date: 10 / 7
Print Name:t R.) YYk f4A CY J1?a`t ,�; %/ 1 Day Telephone: OV 3 " �, 94 9 5
l -t fir) A--- 9800/
City State
Mailing Address:
H:WpplieationsWorma-Applications On Line \2016 ApplicationsWeehanicsl Permit Application Revised 14-t6.doex
Revised: 'January 2016
a,
Page 2 of 2
Cash Register Receipt
City of Tukwila
Receipt:. Number
DESCRIPTIONS
'PermitTRAK
ACCOUNT QUANTITY
`. PAID
$493.16
M17-0092 Address: 12870 INTERURBAN AVE S ' Apn: 2716000010
$493.16
MECHANICAL
$469.68
PERMIT ISSUANCE BASE FEE
R000.322.100.00.00
0.00
$33.15
PERMIT FEE
R000,322.100.00.00
0.00
$436.53
TECHNOLOGY FEE
$23.48
TECHNOLOGY FEE
TOTAL FEES PAID BY RECEIPT: R11961
R000.322.900.04.00 0.00
$23.48
$493.16
Date Paid: Thursday, July 20, 2017
Paid By: SEATTLE MECHANICAL
Pay Method: CHECK 12094
Printed: Thursday, July 20, 2017 10:18 AM 1 of 1
RiSYSTEMS
Cash Register Receipt
City of Tukwila
DESCRIPTIONS
ACCOUNT 1 QUANTITY I PAID
PermitTRAK
$117.42
M17-0092 Address: 12870 INTERURBAN AVE S Apn: 2716000010
$117.42
MECHANICAL
$117.42
PLAN CHECK FEE
TOTAL FEES PAID BY RECEIPT: R11805
R000.322.102.00.00
0.00
$117.42
$117.42
Date Paid: Friday, June 23, 2017
Paid By: SEATTLE MECHANICAL
Pay Method: CHECK 11942
Printed: Friday, June 23, 2017 4:37 PM 1 of 1
i?SYSTEMS
INSPECTION NO.
INSPECTION RECORD
Retain a copy with permit
M17-orY2.
PERMIT NO.
CITY OF TUKWILA BUILDING DIVISION
6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431-3670
Permit Inspection Request Line (206) 438-9350
Project: �1
LEAK S'i 6-N
Type of Inspection:
/14.1 1-KAICA't-.. -o
l--
Address:
1,2870 INT
LJf 2f W
WS,
Date Called:
,1
Special Instructions:
Date Wanted:
/0,-r2 ' 17 .
a.m.
p.m:
Requester:
Phone No:
0 Approved per applicable codes.
Corrections required prior to approval.
COMMENTS:
I) OA -ids 0 a
, duc-r- cil--s-47r,
Inspector:
Date:
Acs /17
REINSPECTION FEE REQUIRED. Prior to next inspection. fee must be
paid at 6300 Southcenter Blvd.. Suite 100. Call to schedule reinspection.
RTU #
Scope of work
Replace existing Carrier 48NLT030 with a new Carrier 48VL-C300403, 2.5 ton RTU.
RTU #12 Replace existing Carrier 48NLT024 with a new Carrier 48VL-C240403, 2.0 ton RTU.
RTU # 15 Replace existing Carrier 48NLT018 with a new Carrier 48VL-C240403, 2.0 ton RTU.
RTU #13
Replace existing Carrier 4800006620 with a new Carrier 48KCOA06A, 5.0 ton RTU.
C-1238
RECEIVED
CITY OF TUKWILA
JUN 21 2017
'ERM IT SFr
Googieearth feet
meters
r,
VL
A DOQAVFn
Date: `7 O _ 1'1
City of Tukwila
BUILDING DIVISION
sero cnanpas Fhp!l hr made to the scope
^f 1"nr!( <"'ishr. : prior approval of
.� ;• .`1 r =;'ding Division
f \vviil toquire a new plan submittal
may i� =;;'L=ue additional plan review fees.
JUL 17 2017
City of Tukwila
BUILDING DIVISION
60
200
ATE 5/30/17
2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1
T ec anica ummary
2015 Washington State Energy Code Compliance
Forms for Commercial Buildings including R2 & R3 over 3 stories and all R1
MECH-SUM
Revised January 2017
Project Information
F 1 E.
Project Title: Clear SignR
FLef V 5/1/2 017
Applicant Information. Provide contact information for individual who can respond toCITY
inquiries about compliance form information provided.
U' J4�Pi ,� kli IU
Company Name: Seattle Mechanical, Inc
JUN Company Address: 899 West Main St., Aubum, WA 98001 JUN
21 2017
Applicant Name:
Applicant Phone: 253-939-9495 pirr'rn1T
CENTER
Project Description
Briefly describe mechanical systems in
the text box provided
❑Total Bldg Performance (TBP)
This path includes all mandatory
provisions per C401.2 Option 2.
MECH-SUM, MECH-CHK, and C407
Energy Analysis forms required.
New Building ❑Building Addition ❑Tenant Improvement ❑System Retrofit
P a
wz, ux (5 �"� [5 1 I 13 of �1 (
1 _ viiiiq f, RT '5
""'' ���'"'
JYNo System Changes
Design Load Calculations
heating, cooling or
includes all applicable
• Load calculation summary • MECH-LOAD-CALC Form
Provide design load calculations for all mechanical systems and equipment serving the building
ventilating needs. If a load calculation summary is provided with the permit documents that
compliance information then the MECH-LOAD-CALC form is not required.
Mechanical Schedules
❑ Mechanical Plans ❑ MECH-EQ Forms (TBD)
Indicate location of equipment compliance information. If provided on plans then MECH-EQ forms are not required,
however, include on plans all applicable compliance information listed in MECH-EQ tables.
Dedicated Outdoor Air
System Requirements and
High Efficiency VAV
Alternate
XDOAS is required per C403.6 effective July 1, 2017 (office, retail, 'education, library and fire station occupancies)
All occupied, conditioned areas shall be served by a DOAS that delivers required ventilation air in a manner that does
not require space conditioning fan operation. Space conditioning fans cycled -off when no heating or cooling is required.
❑ Ventilation provided via natural ventilation per 2015 IMC in lieu of DOAS (C403.6, Exception 1)
❑ Ventilation and space conditioning provided by a HEVAV system per C403.7 in lieu of DOAS (C403.6, Exception
❑ DOAS included in project, although not required (occupancy not office, retail, education, library or fire station)
❑ DOAS related allowances included in project:
❑ Prescriptive vertical fenestration maximum area allowance increased to 40% per C402.4.1.4 with 100% of
conditioned floor area in building served by DOAS.
❑ Exception to air economizer per C403.3 Exception 1, include MECH-ECONO form.
Fan Power
zProject includes HVAC air distribution systems that provide heating and/or cooling
If yes, provide a MECH-FANSYS -SUM form.
❑ For one or more systems, the total fan motor nameplate hp of all fans in HVAC system exceeds 5hp.
If yes, provide a seperate MECH-FANSYS form for each HVAC system exceeding the 5 horsepower threshold.
Refer to Section C403.2.11 and MECH-FANSYS-DOC for requirements and exceptions.
HVAC Hydronic Systems
❑ Hydronic chilled water ❑ Water -loop heat pump 9j No hydronic systems
77��
❑ Hydronic heating water ❑ Geothermal
C406
Op6011RENIEida1FOR
Additional
CODE COMPLIANCE
APPROVED
: I ;:
❑ C406.2 More efficient HVAC equipment and fan systems
Requires 90% of heating and cooling capacity to be equipment listed in tables C403.2.3(1)-(9) or air -to -water heat
pumps and heat recovery chillers. All equipment listed in tables C403.2.3(1)-(7) must be 15% more efficient than
minimum requirements. All stand alone supply, retum, and exhaust fans over 1hp must have FEQ z 71 and must be
selected within 10% of maximum total or static pressure.
. C406.6 Dedicated outdoor air system (DORS)
Requires 90% of conditioned floor area to be served by a DOAS per C403.6 that delivers required ventilation air in a
manner that does not require space conditioning fan operation.
❑ C406.7 Reduced energy in service water heating
Requires 90% of floor area be in occupancy types listed in C406.7.1 and that 60% of annual hot water energy use be
provided by heat pump, waste heat recovery or solar water -heating systems.
•
City of Tukwila
BUILDING DIVISION
Vtll' coq9-
2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1
ec anical ummary, pg. 2 MECH-SUM
2015 Washington State Energy Code Compliance Forms for Commercial Buildings including R2 & R3 over 3 stories and all R1 Revised
January 2017
Service Water Heating
Systems
(� �i
`\i
Equipment Type (s)
❑ Hot water heating tank(s)
❑ boiler9
Distribution Type (s)
❑ Circulation System
Instantaneous•
Heat❑exchange
central hot water/steam
No service water systems
from space heat boiler or
• On -demand
Commissioning
Commissioning is required for:
❑ Mechanical systems per C408.2 ❑ Service water heating systems per C408.4
If required, commissioning shall be performed for all applicable systems regardless of individual equipment capacity.
Exceptions to commissioning requirements:
XTotal output capacity of all mechanical space conditioning systems in the building do not exceed 240,000 Btu/h
cooling or 300,000 Btu/h heating. Mechanical systems commissioning not required.
❑ Capacity of largest service water heating system in building does not exceed 200,000 Btu/h. Service water heating
systems commissioning not required.
Low Energy and Semi -Heated Spaces (Note 6 and 7)
Space
Type
Location in Plan(s)
Space(s) Served
Area Served,
square feet
Heating
Capacity, Btu/h
(Note 4)
Cooling
Capacity, Btu/h
(Note 5)
Peak Space
Conditioning
Capacity,
Btu/h-sf
Compliance
Check
Notes
NI \ilf/\
Note 4 - Provide total installed heating ou put capacity of systems serving Low Energy or Semi -Heated space(s) in btuh. •
Note 5 - Provide total installed cooling capacity of system serving Low Energy space(s) in Btu/h. Not allowed for semi -heated spaces. En er 0 if no cooling.
Note 6 - Refer to Section C402.1.1 Low Energy Building. lntalled peak space conditioning capacity, heating or cooling, may not exceed 3.4 Btu/h*sf.
Note 7 - Refer to Section C402.1.1.1 and Semi -Heated Space definition in Chapter 2. Total heating output capacity may not exceed 8 Btu/h*sf. Only systems without
electric resistance heating and no cooling are eligible for the wall insulation exception under semi -heated.
2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1 - Page 1 of 7
Mechanical Permit Plans Checklist
MECH-CHK
2015 Washington State Energy Code Compliance Forms for Commercial Buildings including R2 & R3 over 3 stori
Project Title: Clear Sign
Date 5/1/2017
The followi,ng information is necessary to check a permit application for compliance with the mechanical systems and equipment requirements of the
Washington State Energy Code, Commercial Provisions.
Applicable
(yes,no,na)
Code Section
Code Provision
Information Required - Must be in permit documents
Location in
Documents
Building Department
Notes
Equipment - Sizing, Performance and Type
N ft
C403.1
Exempt process equipment
Identify equipment to be used in manufacturing, industrial or commercial processes that do not
provide space conditioning; identify provisions applicable to this equipment per C403.1
exception
ryA1
C403.2.1
Load calculations
Provide load calculations performed per ASHRAE Std 183 or equivalent, using design
parameters per C302 and Appendix C; include load adjustments to account for energy
recovery
le,5
C403.2.2
Equipment and system
sizing
Indicate that output capacities of heating and cooling equipment and systems are no greater
than the smallest available equipment size that exceeds the calculated loads; note exceptions
taken
j
� 6
C403.2.3
C403.2.3.2
C403 .2.
3 1
HVAC equipment
performance requirements
(efficiency)
Provide equipment schedules on plans or complete MECH-EQ forms indicating type, capacity,
rated and WSEC minimum efficiencies for all heating and cooling equipment; include supply
and OSA cfms and operating hours for all air systems; identify heating and cooling equipment
that does not have a corresponding WSEC minimum efficiency (manufacturer rated)
f
\16C403.2.14
C405.8
Electric motor efficiency
List all motors >_ 1/12 hp (that are not integral to a rated piece of equipment) in the mechanical
or electrical equipment schedules on plans; indicate hp, rpm, number of poles and rated
efficiency, or exception applied
For fractional hp motors (1/12 - 1 hp), indicate whether they are an electronically commutated
motor, have rated efficiency of at least 70%, or exception taken
\.)ry /
�/ 7
C403.2.11.1
Fan power limitation
For all HVAC fan systems that provide heating and / or cooling, provide system total
nameplate hp in MECH-FANSYS-SUM form
For all applicable HVAC systems with total fan motor hp > 5hp, verify fan system motor hp or
bhp complies with fan power limits per equations in Table C403.2.11.1(1), provide MECH-
FANSYS form for each system
\1..e5
C403.2.11.2
Motor nameplate hp
For all applicable HVAC systems with total fan motor hp > 5hp, indicate fan motors specified
are the smallest available motor hp size greater than fan bhp, note exceptions taken
�f
C403.2.11.3
Fan efficiency
For all applicable HVAC systems with total fan motor hp > 5hp, identify in equipment schedule
all fans required to comply with fan efficiency grade and indicate rated FEG is a 67, or
exception taken; indicate these fans are sized so total efficiency is within 15% of the fan
maximum total efficiency
///
N.)
{�
I
C403.2.11.4
Group R occupancy
exhaust fan efficacy
For all exhaust fans < 400 cfm in Group R occupancies, indicate in equipment schedule the
fan flow rate and efficacy (cfm/watt), or exception taken; refer to Table C403.2.11.4 (CE -57)
C403.2.13
Variable flow capacity -
fans
For fan motors >_ 7.5 hp, indicate method of variable flow control (VSD or equivalent method) in
equipment schedule, or exception taken; for equivalent method for an HVAC system refer to
HVAC System Controls for additional requirements
C403.2.3
Maximum air cooled chiller
capacity
For chilled water plants and buildings with > 500 tons of cooling capacity, indicate air-cooled
chiller capacity is 5 100 tons, or exception taken
C403.4
Large capacity cooling
systems
For buildings with z 300 tons of cooling capacity, indicate method of multi -stage or variable
capacity control (VSD, multiple staged compressors, or max capacity of any single unit < 66%
of the total)
C403.2.3.1
Non-standard water-cooled
centrifugal chillers
For water-cooled centrifugal chillers not designed for operation at standard conditions, provide
calculations documenting maximum full load and part load rated equipment performance
requirements
C403.2.13.1
C403.4.3.2
Centrifugal fan open -circuit
cooling towers
For open -circuit centrifugal fan cooling towers with a 1,100 gpm capacity, indicate cooling
towers comply with efficiency requirements for axial fan open circuit cooling towers
C403.4.2
C403.4.2.5
Large capacity boiler
systems
For single boilers with > 500,000 Btu/h capacity, indicate multi -stage or modulating bumer
For boiler system (single or multiple) with > 1,000,000 Btu/h capacity, indicate tumdown ratio
per Table C403.4.2.5 and method (multiple single input boilers, modulating boilers, or
combination)
C403.2.13
Variable flow capacity -
pumps
For pump motors >_ 7.5 hp, indicate method of variable flow control (VSD or equivalent
method) in equipment schedule, or exception taken; for equivalent method for a hydronic
system refer to Hydronic System Controls for additional requirements
C403.2.3
Gas and oil -fired forced air
fumace and unit heaters
For forced air fumaces with capacity i' 225,000 Btu/h and all unit heaters, indicate in
equipment schedule intermittent ignition or IID, flue or draft damper, and rated jacket loss
C403.2.4.8
Combustion heating
equipment
For combustion heating equipment with output capacity > 225,000 Btu/h, indicate modulating
or staged combustion control
C403.2.3.3
Packaged electric heating /
cooling equipment
Verify all packaged electric equipment with > 6,000 Btu/h cooling capacity and any amount of
heating is a heat pump; include in equipment schedules
C403.2.12
Heating outside a building
Indicate systems providing heating in non -enclosed outdoor occupied spaces are radiant
systems; refer to HVAC System Controls for additional requirements
C403.2.7.1
Kitchen exhaust hoods
Indicate on plans the type, duty and exhaust air rate of each kitchen hood, refer to HVAC
System Controls for additional requirements
\
5
C403.2.4.3
Outdoor supply air, exhaust
and relief dampers
Indicate locations of OSA intake, and exhaust and relief outlet dampers on plans; indicate
whether dampers are Class 1 motorized, or gravity and exception taken (include leakage
rating, cfm/sf); refer to HVAC System Controls for additional requirements for OSA dampers
125
C403.2.4.3
Retum air dampers
Indicate locations of retum air dampers that are integral to economizer operation; verify
dampers are motorized; indicate whether dampers are Class 1, or within packaged equipment
eligible for leakage rating exception (include leakage rating, cfm/sf)
2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1 - Page 2 of 7
Mechanical Permit Plans Checklist
MECH-CHK
2015 Washington State Energy Code Compliance Forms for Commercial Buildings including R2 & R3 over 3 stories and all R1
Project Title: Clear Sign
Date 5/1/2017
The follow@ng information is necessary to check a permit application for compliance with the mechanical systems and equipment requirements of the
Washington State Energy Code, Commercial Provisions.
Applicable
(yes,no,na)
Code Section
Code Provision
Information Required - Must be in permit documents
Location in
Documents
Building Department
Notes
IC403.2.4.3
Adampers
Stairway and shaft vent
Indicate location of stairway and shaft vent dampers on plans; verify dampers are Class 1
motorized; refer to HVAC System Controls for additional requirements
C403.2.4.4
Zone isolation dampers
For systems serving areas > 25,000 sf or spanning more than one floor, that include areas that
are expected to be occupied non -simultaneously; identify isolation zone areas on plans and
locations of associated isolation dampers in HVAC distribution system; refer to HVAC System
Controls for additional requirements
C403.2.3.4
Humidification
For cooling systems with humidification equipment that are also required to have air
economizer, indicate humidifier is adiabatic (direct evaporative or fog atomization), or
exception taken
Additional Efficiency Package Option, More Efficient HVAC Equipment & Fan Performance -
Must comply with all 3 provisions to be eligible
0 ck
C406.2.1
C403.2.3
HVAC system selection
To comply with additional efficiency package option, calculate the percentage of heating and
cooling equipment in the project (based on output capacity) that do not have a corresponding
WSEC listed efficiency; shall be less than 10% to comply
C406.2.2
C403.2.3
Minimum equipment
efficiency
To comply with additional efficiency package option, indicate that all listed heating and cooling
equipment have a rated efficiency that exceeds WSEC listed efficiency by at least 15%
C406.2.3
C403.2.11.3
Minimum fan efficiency
To comply with additional efficiency package option, indicate rated FEG of stand alone fans is
>_ 71; indicate these fans are sized so the fan efficiency at design conditions is within 10% of
the maximum total or static efficiency
HVAC System Controls ,
NWhere
It'd
C403.2.4.1
Thermostatic controls
(thermostats and
humidistats)
Indicate locations of thermostatic and humidity control devices and the zones they serve on
plans, including perimeter system zones
adjacent (neighboring) zones are controlled by separate thermostats (including
perimeter systems used to offset heat gain or loss), and are connected by permanent
openings > 10% of either zone sf area, indicate controls configured to prevent adjacent zones
from operating in conflicting modes (one in heat, other in cool); applies to adjacent perimeter
zones, adjacent nonperimeter zones, and adjacent perimeter and nonperimeter zones
If applying Exception 2 to nonpedmeter zones adjacent to perimeter zones, indicate that
setpoints and deadband settings in these zones are coordinated so cooling in a nonperimeter
zone does not occur until the temperature in that zone is 5°F higher than the adjacent
perimeter zone temperature in heating
C403.2.4.1.1
Heat pump supplementary
heat
Indicate staged heating operation with compression as the first stage of heating and
supplemental heating controlled with outdoor lock -out temperature set to 40°F or less
yts
C403.2.4.1.2
Deadband
Indicate zone thermostatic controls configured with 5°F minimum deadband for systems that
control both heating and cooling
C403.2.4.1.3
Setpoint overlap restriction
(thermostats)
If separate heating and cooling systems with separate thermostatic control devices are used to
serve a zone, indicate locations of both thermostatic control devices and the zone they serve
on plans
Indicate a limit switch, mechanical stop or DDC control with programming to prevent
simultaneous heating and cooling
C403.2.4.2
C403.2.4.2.1
C403.2.4.2.2
Automatic setback and
shutdown
Indicate zone thermostatic controls configured with required automatic setback and manual
override functions, setback temperatures, and control method (automatic time clock or
programmable controls); note exceptions taken
C403.2.4.2.3
Automatic (optimum) start
Indicate system controls that adjust equipment start time required to bring each area served
up to design temperature just prior to scheduled occupancy
C403.2.4.3
Outdoor su ppty air dampers
Indicate automatic controls configured to close OSA damper during unoccupied equipment
operation; not including economizer cooling, night flush or IMC required OSA / exhaust
NIA
C403.2.4.3
Stairway and shaft vent
dampers
Indicate method of activation of stairway and shaft vent dampers (fire alarm or interruption of
power)
Na
I V
pt
C403.2.4.4
Zone isolation controls
For systems serving areas > 25,000 sf or spanning more than one floor, that include areas that
are expected to be occupied non -simultaneously; indicate controls that allow for independent
space conditioning of isolation zones; or exception taken
C403.2.12
Heating outside a building
Indicate occupancy sensing or timer switch controls configured to automatically shut off
heating system when area served is unoccupied
C403.2.4.5
Snow melt systems
Indicate automatic controls configured to shut off system when pavement temperature
exceeds 50°F and no precipitation is falling, and when outdoor air temperature exceeds 40°F
C403.2.4.6
Freeze protection system
controls
Indicate automatic controls to shut off system when outdoor temperature exceeds 40°F, or
conditions protect fluid from freezing
C403.2.4.9
Group R1 hotel / motel
guest rooms
For hotels and motels with over 50 guest rooms, indicate automatic controls serving guest
rooms that are capable of setback (heating) and set-up (cooling) of temperature setpoint by at
least 5°F; indicate control method - activated by room entry or occupancy sensor
2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1 - Page 3 of 7
Mechanical Permit Plans Checklist
MECH-CHK
2015 Washington State Energy Code Compliance Forms for Commercial Buildings including R2
Project Title: Clear Sign
Date 5/1/2017
The following information is necessary to check a permit application for compliance with the mechanical systems and equipment requirements of the
Washington State Energy Code, Commercial Provisions.
Applicable
(yes,no,na)
Code SectionCode
Provision
Information Required -Must be in permit documents
Location in
Documents
Building Department
Notes
IN y�
�.(U1
C403.2.4.10
0403.2.4.11
Group R2 / R3 dwelling
units, Group R2 sleeping
units
For primary space conditioning system, indicate 5-2 programmable thermostats capable of two
setback periods per day; for all thermostats indicate purpose (heating only, cooling only, or
both), required temperature range and at minimum a 10°F deadband; or exception taken
0403.2.6
C403.2.11.4
Ventilation
Indicate method of ventilation air delivery (natural or mechanical) for each zone
If mechanically delivered, indicate that systems are configured to provide not more than 150%
of, but at least the minimum required volume of outdoor air to each zone per IMC, ASHRAE
62.1 or other applicable code (WAC, OSHA, etc); or exception taken
If delivered via natural ventilation, identify required elements per IMC including minimum
openable area to the outdoors or qualifying adjoining spaces
C403.2.6.2
Demand controlled
ventilation
Identify spaces > 500 sf with occupant load > 25 people/1,000 sf per IMC; for each space
indicate whether it is served by an HVAC system with total design OSA > 3,000 cfm, and / or
the system has airside economizer or automatic modulating OSA damper; indicate OSA
controls are configured to provide demand controlled ventilation or provide supporting
documentation for applied exception
0403.2.6.3
Occupancy sensors
For gyms, classrooms, auditoriums and conference rooms > 500 sf, indicate occupancy -based
OSA control when space is unoccupied and method (closes OSA damper or shuts -off
equipment); or altemate means provided to automatically reduce OSA when space is partially
occupied
0403.2.6.4
0403.2.6.4.1
Enclosed loading dock
ventilation
For enclosed loading docks, indicate ventilation / exhaust system method of activation (gas
detection system for CO and NO2, or occupancy sensors), and control method (staged or
modulating)
C403.2.6.4
0403.2.6.4.2
Enclosed parking garage
ventilation
For enclosed parking garages, indicate ventilation / exhaust system activated by gas detection
system for CO and NO2, and control method (staged or modulating); or exception taken
0403.2.7.1
Kitchen exhaust hoods
Provide calculations that show a balanced accounting of total kitchen exhaust (include all
hoods) with % of: supply air, transfer air from adjacent spaces, and make-up air, if applicable,
indicate that direct make-up air to each hood does not exceed 10% of hood exhaust
For kitchens with total hood exhaust exceeding 2,000 cfm, indicate exhaust air rate per Table
C403.2.7.1 and compliance method (DCV, energy recovery, or transfer air that would
otherwise be exhausted)
C403.2.7.2
Laboratory exhaust systems
Refer to Systems Requiring Energy Recovery for requirements
C403.2.13
Variable flow capacity -
HVAC system fans
For HVAC fan motors >_ 7.5 hp, indicate method of variable flow control (VSD, or equivalent
control method that reduces design air volume by 50% at 1/3 static design pressure); note
exception taken
C403.3.1
DX air handler variable
cooling control
(Under Integrated
Economizer)
For DX air handlers with economizer and cooling capacity 2 65,000 Btu/h, indicate number of
cooling stages provided and method (multiple compressors and / or variable speed
compressors); indicate minimum displacement (capacity reduction) as % of full load
Indicate control method (cooling capacity controlled in response to space temperature, space
temperature controlled by modulating supply airflow, or both)
C403.2.11.5
Fan airflow control
For DX air handling units with cooling capacity >_ 65,000 Btu/h and evaporative and chilled
water air handling units with fan 2 0.25 hp, indicate whether system is single zone or multiple
zone and related control method (cooling capacity controlled in response to space
temperature, space temperature is controlled by modulating supply airflow, or both)
For mechanical cooling systems (includes DX and chilled water coils) that control cooling
capacity in response to space temperature - Provide a minimum of two stages of fan control;
indicate minimum fan speed is <_ 66% of full speed drawing 5 40% of full speed fan power
during periods of low cooling or ventilation only
For other mechanical cooling systems (includes DX and chilled water coils) that control space
temperature by modulating airflow (in lieu of, or in addition to, controlling capacity in response
to space temperature) - Provide fan controls for modulating supply airflow; indicate minimum
fan speed is <_ 50% of full speed drawing 5 30% of full speed fan power during periods of low
cooling or ventilation only; or exception taken
C403.2.4.12
DDC system capabilities
Provide central and zone level DDC controls as required based on system application,
capacity or size thresholds and other qualification per Table 0403.2.4.12.1
Identify all DDC system input / output control points; indicate capability for trending and
graphical display
During
Systems
C403.2.8.1
C403.2.8.3
Duct construction
Indicate on plans that all ductwork is constructed and sealed per IMC
For OSA ductwork, also indicate on plans that ductwork meets air leakage requirements per
C402.5 and vapor retarder requirements per the IBC
C403.2.8.3
Duct pressure
classifications
Identify location of low, medium and high pressure ductwork on plans
C403.2.8.3.3
High pressure duct leakage
test
Indicate high pressure duct leakage testing requirements on plans; provide test results to
jurisdiction when completed
2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1 - Page 4 of 7
Mechanical Permit Plans Checklist
MECH-CHK
2015 Washington State Energy Code Compliance Forms for Commercial Buildings including R2 & R3 over 3 stories and all R1
Project Title: Clear Sign
Date 5/1/2017
The following information is necessary to check a permit application for compliance with the mechanical systems and equipment requirements of the
Washington State Energy Code, Commercial Provisions.
Applicable
(yes,no,na)
Code Section
Code Provision
Information Required - Must be in permit documents
Location in
Documents
Building Department
Notes
'j`��1
A
C403.2.8.1
C403.2.8.2
Duct insulation
For supply and retum ductwork located in unconditioned space or outdoors, indicate R -value
of insulation on ductwork on plans; identify climate zone; note exceptions taken
For supply ductwork located in conditioned space, identify if design supply temperature is <
55°F or> 105°F and indicate R -value of insulation on this ductwork on plans; note exception
taken
For OSA ductwork, shafts and plenums, indicate R -value of insulation on these elements on
plans per Table C402.1.3 for steel -framed walls; note exception taken
Piping Systems
iv
C403.2.9
Piping insulation
p 9
Indicate design temperature range of fluid conveyed in piping and thickness of insulation (in
inches) on hydronic piping plans; or exception taken
il1
/
C403.2.9.1
Piping insulation exposed to
weather
Indicate method of protection of pipe insulation from damage / degradation on hydronic piping
plans
Economizers
C403.3
Air economizer required
Identify in equipment schedules on plans or in MECH-EQ forms all cooling systems requiring
air economizer controls
Provide MECH-ECONO form indicating systems utilizing air economizer exceptions, including
those with water -side economizer in lieu of air economizer, indicate on plans eligible
exception(s) taken and measures to comply with exception(s)
C403.3.1
Integrated economizer
operation - air and water
Indicate air and water -side economizers are configured for partial cooling operation even
where additional mechanical cooling is required to meet the load
C403.3.2
Economizer heating system
impact - air and water
Verify control method of HVAC systems with economizers does not increase building heating
energy usage during normal operation
�f
`Y ��j
C403.3.3.1
Air economizer capacity
Indicate modulating OSA and retum air dampers are configured to provide up to 100% OSA
for cooling
)))
\I-P,
/f7
C403.3.1
C403.3.3.2
Integrated air economizer
Verify mechanical cooling controls are interlocked with air economizer controls so the outside
air damper remains in 100% open position when mechanical cooling is also required to meet
the cooling load, until the leaving air temperature is < 45°F
For systems with cooling capacity >_ 65,000 Btu/h, verify that control of economizer dampers is
not based only on mixed air temperature; or exception taken
p 1i
C403.3.3.3
controls Air economizer high limit
Indicate high limit shut-off control method and required high limit per Table C403.3.3.3
C403.3.4.1
Water economizer capacity
For eligible systems where water -side economizer may be provided in lieu of air economizer,
indicate system is capable of 100% design cooling capacity at 50°F db / 45°F wb OSA
temperatures
C403.3.4.2
Water economizer
maximum pressure drop
Indicate pressure drop across precooling coils and heat exchangers in water economizer
system do not exceed pressure drop limit
C403.3.1
DX air handling equipment
control
For DX air handlers with economizer and cooling capacity 2 65,000 Btu/h, refer to HVAC
System Controls for requirements
C403.2.4.7
DX equipment economizer
fault detection and
diagnostics
For DX air handlers with economizer and cooling capacity z 54,000 Btu/h, provide a fault
detection and diagnostics (FDD) system to monitor economizer system operation and report
faults
Syste Requiring Energy Recovery
C403.5.1
Energy recovery (ER) -
ventilation / exhaust
systems
For systems with design OSA > 5,000 cfm, or design supply air cfm and % OSA exceeding the
values in Tables C403.5.1(1) or (2), indicate exhaust air ER method; or exception taken with
supporting calculations
For rooms served by multiple systems with aggregate design OSA > 5,000 cfm, or aggregate
design supply air cfm and % OSA exceeding the values in Tables C403.5.1(1) or (2), indicate
exhaust air ER method; or exception taken with supporting calculations
Indicate ER rated effectiveness that increases OSA enthalpy by 2 50% based on delta
between OSA and retum air enthalpies at design conditions
C403.2.7.2
Laboratory exhaust systems
(energy recovery)
For buildings with total lab exhaust > 5,000 cfm, indicate method of energy recovery used to
pre -condition laboratory make-up air; ER effectiveness (min 25°F); or altemative method per
exception (VAV exhaust, semi -conditioned makeup, or CERM calculation)
C404.10.4
(under
C404.11)
Pools and permanent spas
exhaust systems
(energy recovery)
For buildings with pools or spas with water surface area > 200 sf, indicate exhaust air ER
method and use of waste heat (preheat ventilation air, pool water or service hot water); or
exception taken
Indicate ER system has the rated effectiveness and is configured to decrease the exhaust air
temperature at design conditions by t 36°F
C403.5.2
Energy recovery -
steam condensate systems
For buildings with on-site steam heating systems, indicate condensate water ER
For buildings that use off-site generated steam where condensate is not retumed to the
source, indicate on-site condensate water ER
2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1 - Page 5 of 7
Mechanical Permit Plans Checklist
MECH-CHK
2015 Washington State Energy Code Compliance Forms for Commercial Buildings including R2 & R3 over 3 stories and all R1
Project Title: Clear Sign
Date 5/1/2017
The following information is necessary to check a permit application for compliance with the mechanical systems and equipment requirements of the
Washington State Energy Code, Commercial Provisions.
Applicable
Code Section
Code Provision
Information Required - Must be in permit documents
Location in
Documents
Building Department
Notes
N
Pk
if P
C403.5.3
Energy recovery -
cooler / freezer condensers
For buildings with food service, meat or deli departments that have 2 500,000 Btu/h of remote
refrigeration capacity for coolers / freezers, indicate condenser ER and use of captured energy
(service water heating, space heating, or dehumidification reheating)
For buildings with z 40,000 sf conditioned floor area and with 2 1,000,000 Btu/h of remote
refrigeration capacity for coolers / freezers, indicate condenser ER and use of captured energy
for service water heating and also for space heating, or dehumidification reheating
0403.5.4
Energy recovery -
condenser systems
For buildings with 24-hour operation and with > 1,500,000 Btu/h of heat rejection capacity and
design service hot water load > 250,000 Btu/h, indicate condenser ER to pre -heat service
water, or exception taken. Provide calculations showing the amount of recovered heat that is
utilized (60% of peak heat rejection load or pre -heat service water to 85°F).
Hydronic System Controls
qC403.2.13
/y
„I
C403.4.2.7
Variable flow control -
hydronic system pumps
For hydronic system pump motors z 7.5 hp, indicate method of variable flow control (VSD or
equivalent method that requires z 30% design wattage at 50% design fluid flow); note
exception taken
Identify whether hydronic coils have DDC controls and associated manner of pump speed
control (differential pressure, zone hydronic demand, etc)
C403.2.5
C403.4.2.4
Hydronic system setback
and part load controls
For boilers that provide building heating, indicate controls that provide heating water
temperature setback based on outdoor temperature
For heating and chilled water systems z 300,000 Btu/h, indicate systems are configured to
automatically reset supply water temperature based upon demand; or exception taken.
If system pump motor hp 2 3 hp, also indicate controls automatically reduce flow by z 50%.
For chilled water systems (z 300,000 Btu/h, pump motor hp z 3 hp) that serve water-cooled
unitary air conditioners, indicate VSD or staged pumps in chilled water system and heat
rejection loop that reduce pump flow so that one control valve is nearly wide open, or to
maintain a minimum differential pressure; or exception taken
C403.4.2
Boiler sequencing
Indicate automatic controls that sequence operation of multiple boilers
C403.4.6
Hot gas bypass limitation
For cooling equipment with hot gas bypass, provide either muttiple step unloading or
continuous capacity modulation; indicate bypass capacity per Table C403.4.6
C403.4.2.2
Two -pipe changeover
systems
Indicate changeover deadband (min 15°F), heating / cooling mode scheduling and
changeover temperature range (limit 30°F)
C403.4.2.6
Chiller / boiler plant pump
isolation
Indicate controls are configured to automatically reduce overall plant flow and shut-off flow
through individual chillers and boilers when not in use
C403.2.13.1.1
C403.4.3.1.1
C403.4.3.1.2,
Heat rejection equipment -
variable flow control
For cooling towers with fan motors z 7.5 hp, indicate VSD and method to adjust fan speed
(adjusted based on leaving fluid temperature or condenser temperature / pressure of heat
rejection device)
For multiple -cell heat rejection equipment with VSD, indicate controls that ramp all fans in
unison
C403.4.3.3
Heat rejection equipment -
cooling tower flow tumdown
Indicate open -circuit cooling towers with multiple pumps or VSD control are designed so all
cells can be run in parallel
C403.4.2.3.1
Water loop heat pump -
deadband
Indicate capability of central equipment to provide minimum 20°F water supply temperature
deadband between heat rejection and heat addition modes; or exception taken
C403.4.2.3.2.1
Water loop heat pump -
heat rejection equipment,
Zone 4
Indicate type of cooling tower (open- or closed-circuit) in equipment schedule; indicate method
used to limit system heat loss when heat rejection is not needed
C403.4.2.3.2.2
Water loop heat pump -
heat rejection equipment,
Zone 5
For open- or closed-circuit cooling towers, provide a heat exchanger that separates the cooling
tower and heat pump loop
C403.4.2.3.3
Water loop heat pump -
isolation valves
For hydronic heat pump systems with total system power > 10 hp, indicate 2 -way isolation
valves on each heat pump and variable flow system control
Dedicated Outdoor Air Systems (DOAS) - Optional through 6/30/16, Prescriptive 7/1/2016
00403.6
0403.6.3
Dedicated outdoor air
systems
For buildings with office, retail, education, library and fire station spaces, identify these spaces
on plans; indicate that ventilation air in each occupied space is provided via a DOAS system;
or document compliance with C403.6.3 Impracticality; or exception taken (buildings complying
with C402.4.1.4 or C406.6 may not utilize exceptions)
C403.6.1
Energy recovery ventilation
with DOAS
For all DOAS systems, indicate exhaust air ER method; or exception taken with supporting
calculations. Indicate ER rated effectiveness that increases OSA enthalpy by z 50% based on
deka between OSA and retum air enthalpies at design conditions.
2
0403.6.2
Heating /cooling system
controls with DOAS
Indicate equipment associated with the delivery of zone level heating and cooling (fans,
hydronic pumps, primary air dampers, etc) are configured to shut off, and central equipment is
configured to tum down, when there is no call for heating or cooling in the zone they serve
If applying Exception to heating / cooling fans used for air mixing in the space during deadband
periods, include fan watts per cfm in equipment schedule
2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1 - Page 6 of 7
Mechanical Permit Plans Checklist
MECH-CHK
2015 Washington State Energy Code Compliance Forms for Commercial Buildings including R2 & R3 over 3 stories and all R1
Revised January 2017
Project Title: Clear Sign
Date 5/1/2017
The following information is necessary to check a permit application for compliance with the mechanical systems and equipment requirements of the
Washington State Energy Code, Commercial Provisions.
Applicable
(yes,no,na)
Code Section
Code Provision
Information Required - Must be in permit documents
Location in
Documents
Building Department
Notes
0402.4.1.4
0403.6
•
Increased prescriptive
maximum vertical
fenestration area with DOAS
Indicate that all occupied, conditioned spaces are served by a DOAS per C403.6
Additional Efficiency Package Option, Dedicated Outside Air Systems (DOAS)
C406.6
Building provided with
DORS
To comply with additional efficiency package option, indicate that 90% or more of all occupied,
conditioned spaces are served by a DOAS per C403.6
Mul ple Zone Air Systems
C403.4.4
Air systems serving multiple
zones
Identify supply air systems serving multiple zones and the zones they serve on plans; indicate
whether system is VAV and method of primary air control; or provide supporting
documentation for applied exception to VAV
C403.4.4
VAV systems serving
multiple zones
Provide equipment schedules on plans or MECH-EQ form that list all VAV air terminals and
types
For each air terminal include: maximum airflow rates for primary supply air during zone peak
heating and zone peak cooling; maximum airflow during reheating, recooling or mixing;
minimum airflow rate to maintain required ventilation, and the basis for these values; if IMC or
ASHRAE 62.1 multiple zone equation is basis for minimum flow rates, provide calculation on
plans
C403.4.4.1
Single duct VAV terminal
units
Indicate single duct terminal units are configured to reduce primary supply air before reheating
or recooling
C403.4.4.2
Dual duct systems - terminal
units
For systems with separate warm air and cool air ducts, indicate terminal units are configured to
reduce the flow from one duct to minimum before mixing with air from the other duct
0403.4.1.1
C403'4'1.2
VAV system static
pressure sensors -
sensors and DDC set points
Indicate locations of duct static pressure sensors on plans; include at least one sensor per
major duct branch; verify controller setpoint pressure at each sensor is 5 1.2 inch w.g.
For systems with zone level DDC, indicate controls are configured to monitor zone damper
positions and reset static pressure setpoint based on the zone requiring most pressure;
include control logic that automatically detects and generates an alarm if any zone excessively
drives reset logic, and allows building operators to exclude zones from reset logic
C403.4.4.3
Multiple -zone VAV system
ventilation optimization
controls
For systems with zone level DDC controls, indicate controls are configured to automatically
reduce outdoor airflow in response to changes in system ventilation efficiency; or exception
taken
C403.4.4.4
VAV system supply air reset
Indicate controls automatically reset supply air temperature in response to building loads or
outdoor air temperature; or exception taken
Multi .
le Zone HVAC Systems, High Efficiency VAV - Required for systems utilizing 0403.6 DOAS Exception 2, must comply with all 16 provisions
C403.7,
Item 1
Air economizer
Indicate system is configured for 100% air economizer operation and complies with all related
economizer requirements per C403.3 (without economizer exceptions)
C403.7,
Item 2
Direct digital controls (DDC)
Provide DDC controls for all components of system; identify all DDC system input / output
control points; indicate capability for trending and graphical display
C403.7,
Item 3
Outdoor airflow
measurement and reduction
For systems with minimum OSA > 2,500 cfm, indicate outdoor airflow monitoring station that
measures OSA intake under all load conditions; indicate control sequence that increases or
reduces system OSA cfm based on VAV terminal feedback of ventilation efficiency (per
C403.4.4.3 without exceptions) or DCV (per C403.2.6.2)
C403.7,
Item 4
Supply airflow measurement
For systems with minimum OSA > 2500 cfm, indicate supply airflow monitoring station
capable of measuring supply air delivered to VAV terminals under all load conditions
C403.7,
Item 5
Zone isolation and
maximum area served
Verify maximum area served by a single HEVAV system is 5 50,000 sf, or one entire floor,
whichever is greater, in addition if a system serves > 25,000 sf, that includes areas that are
expected to be occupied non -simultaneously, indicate zone isolation controls per C403.2.4.4
C403.7,
Item 6
Interior / exterior zone
design supply air
temperature
Verify that VAV terminals serving interior cooling driven loads are sized per design supply air
temperature that is 5°F higher than VAV terminals serving exterior zones
C403.7,
Item 7
Maximum air terminal inlet
velocity
Identify air terminals with minimum primary airflow setpoints > 50% of maximum setpoint in
equipment schedule or MECH-EQ form; indicate air terminal inlet velocity does not exceed 900
fpm
C403.7,
Item 8
Sequence of operation
Indicate DDC system sequences of operation are designed and configured per ASHRAE GPC
36
C403.7,
Item 9
Maximum allowable system
brake horsepower
Verify fan system bhp is 5 90% of the bhp limit per Option 2 equation in Table C403.2.11.1(1),
provide MECH-FANSYS form for each system
/
C403.7,
Item 10
Fan -powered terminal unit
motor and control
Indicate all series and parallel terminal fans have electronically commutated motors; indicate
DDC control system is configured to vary air terminal fan speed as a function of the load;
indicate fan speed during periods of low heating, low cooling, or ventilation only is 5 66% of
peak design air flow or provide supporting documentation for applied exception
2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1 - Page 7 of 7
Mechanical Permit Plans Checklist
MECH-CHK
2015 Washington State Energy Code Compliance Forms for Commercial Buildings including R2 & R3 over
Project Title: Clear Sign
Date 5/1/2017
The following information is necessary to check a permit application for compliance with the mechanical systems and equipment requirements of the
Washington State Energy Code, Commercial Provisions.
Applicable
(yes,no,na)
Code Section
Code ProvisionInformation
Required -Must be in permit documents
Location in
Documents
Building Department
Notes
C403.7,
Item 11
Application of single duct
and fan -powered terminal
units
Indicate VAV terminal types on plans; verify fan -powered terminal units only serve perimeter
zones with envelope loads; verify all other zones are served by single duct terminal units
C403.7,
Item 12
Fan -powered terminal unit
primary air reset
Indicate DDC controls are configured to automatically reset the primary supply air cfm setpoint
of all fan -powered terminal units to the minimum required to maintain ventilation during
occupied heating or deadband, based upon the VAV air handling unit OSA ventilation fraction
C403.7,
Item 13
High occupancy space
controls
For spaces > 150 sf with occupant density 2 25 people / 1000 sf, indicate space is served by a
dedicated terminal unit with DCV control that resets terminal unit ventilation setpoint; also
indicate occupancy sensor control that automatically reduces minimum ventilation to zero and
sets back room heating and cooling setpoints by Z 5°F
C403.7,
Item 14
Dedicated HVAC systems
For server, electronic equipment, telecom or similar spaces with cooling loads > 5 W/sf,
indicate spaces are served by independent HVAC systems that are separate from HPVAV
systems serving rest of building; indicate dedicated HVAC systems have air economizer
controls or energy recovery per C403.3 Exception 9
C403.7,
Item 15
Central plant efficiency
Indicate whether systems are served by a high efficiency heating water plant, or a high
efficiency chilled water plant
If complying via high efficiency heating water plant: Indicate all VAV terminals have hydronic
heating coils served by heating water system with either gas-fired boiler(s) with thermal
efficiency >_ 90%, air -to -water heat pumps, or heat recovery chillers
If complying via high efficiency chilled water plant: Indicate all VAV air handlers have cooling
coils served by chillers with rated IPLV efficiency that exceeds WSEC listed IPLV by at least
25% per Table C403.2.3(7) (note water-cooled IPLV is max, all others are min); indicate
smallest chiller or compressor in plant is <_ 20% of total plant capacity, or provide thermal
storage sized for < 20% of total plant capacity
C403.7,
Item 16
Fault detection and
diagnostics
Indicate DDC system includes a fault detection and diagnostics (FDD) system configured to
monitor operation and provide fault reporting of required parameters for all VAV air handlers
and VAV air terminal units in the HPVAV system
H AC Equipment Energy Use Metering
C409.3.1
HVAC equipment energy
use metering
For new buildings > 50,000 sf and building additions > 25,000 sf, verify energy use metering of
all equipment used to provide space heating and cooling, dehumidification and ventilation will
be provided per C409; indicate equipment eligible for exception
D cumentation and System Specific Requirement To Support Commissioning
C408.2
Scope of mechanical
systems commissioning
Indicate that all mechanical systems, equipment, and controls for which the WSEC requires
control functions and / or configuration to perform specific functions are required to be
commissioned;
For buildings with t 240,000 Btu/h total output cooling capacity or z 300,000 Btu/h total output
heating capacity, indicate that all mechanical systems regardless of individual capacity are
required to be commissioned; or provide building heating / cooling capacity calculation
demonstrating eligibility for exception
C403.2.10
C408.1.1
C408.1.2
C408.1.4.2
C103.6
Commissioning
requirements in construction
documents
Indicate in plans and specifications that Cx per C408 is required for all applicable mechanical
systems;
Include general summary with at a minimum of Items 1 thru 4 of the Cx plan per C408.1.2
including: narrative description of activities, responsibilities of the Cx team, schedule of
activities including verification of project close out documentation per C103.6, and conflict of
interest plan (if required);
Include in general summary that a Cx project report or Compliance Checklist (Figure
C408.1.4.2) shall be completed by the Certified Cx Professional and provided to the owner
prior to the final mechanical inspection.
C408.2.2
Air system and hydronic
system balancing
Indicate in plans that air and fluid flow rates shall be tested and balanced within the tolerances
defined in the specifications; indicate systems shall be balanced in a manner to first minimize
throttling losses, then adjusted to meet design flow conditions
C408.2.2.1
Air system balancing
devices
Indicate devices that provide the capability to balance all supply air outlets, zone terminals and
air handling equipment requiring system balancing
C408.2.2.2
Hydropic system balancing
devices
Indicate devices that provide the capability to isolate, balance and measure flow across all
hydronic equipment requiring system balancing including heating and cooling coils and pumps
C408.2.3
Functional performance
testing criteria
Identify in plans and specifications the intended operation of all equipment and controls during
all modes of operation, including interfacing between new and existing -to -remain systems
Project Close Out Documentation
C103.6
Documentation and project
close out submittal
requirements
Indicate in plans that project close out documentation and training of building operations
personnel is required for all mechanical components, equipment and systems govemed by
this code; indicate close out documentation shall include: record documents, O&M manuals,
applicable WSEC compliance forms and calculations
2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1
Economizer Exceptions MECH-ECONO
2015 Washington State Energy Code Compliance Forms for Commercial Buildings including R2 &
R3 over 3 stories and all R1 Revised January 2017
Project Title: Clear Sign
Date 5/1/2017
All cooling systems shall be configured to provide air economizer operation, regardless of
system capacity, for new construction and mechanical system alterations. Various exceptions to
this requirement are available. Identify all systems that an economizer exception will be applied
to and additional information as noted below.
For Building Dept. Use
Economizer
Exception
Summary
Refer to Section
C403.3 for
descriptions of
economizer
provisions and
exceptions. For
alterations refer
to Section
C503.4 and
Table C503.4.
ECONOMIZER EXCEPTIONS - NEW CONSTRUCTION AND ADDITIONS
Exp 1
Cooling equipment serving spaces that are provided with a dedicated
outdoor air system (DOAS) per C403.6. Spaces served shall have year-
round design cooling loads from lights and equipment less than 5 watts per
square foot.
System ID
Lighting +
Equipment
Loads (Wlsf)
Exp 2
Single zone unitary or package systems with dehumidification that affect
other systems such that air economizer would increase energy
consumption.
System ID
Exp 3 High efficiency single zone unitary or packaged systems. Equipment
cooling efficiency shall be better than the WSEC required minimum
efficiency by at least 64% in Climate Zone 4C and 59% in Climate Zone 5B
per Table C403.3.
System ID
Exp 4 Equipment that provides hydronic chilled water for chilled beams and
chilled ceiling systems that is served by a water economizer system per
C403.3.4 in lieu of air economizer.
System ID
Exp 5 Water -source heat pumps with heat recovery. Heat pump efficiency shall
be 15% better than WSEC required minimum efficiency. Provide at
minimum 60% air economizer. Energy recovery to preheat OSA shall
have at least 50% effectiveness. Additional system requirements apply.
System ID
Exp 6 Cooling equipment serving Group R occupancies. Per unit limit
is less than 20,000 Btu/h cooling capacity for equipment installed
outdoors or in a mech room adjacent to the outdoors. For cooling
equipment installed in other locations the unit limit is less than
54,000 Btu/h. Efficiency shall be 15% better than WSEC
required minimum efficiency.
System ID
Equipment
Location
Cooling
Capacity
(Btu/h)
Exp 7 Variable refrigerant flow (VRF) systems with energy recovery. Outdoor
unit shall be a reverse -cycle heat pump with variable speed
compressor(s) and condenser fan(s). Outdoor unit cooling capacity shall
be not less than 65,000 Btu/h. Energy recovery to preheat outdoor air
shall have at least 50% rated effectiveness. System shall be capable of
providing simultaneous heating and cooling by tranferring recovered
energy from zone(s) in cooling mode to other zone(s) that are in heating
mode.
Outdoor Unit
System ID
Cooling
Capacity
(Btu/h)
Exp 8 Cooling equipment serving Controlled Plant Growth Environments.
Equipment cooling efficiency shall be better than WSEC required
minimum efficiency by at least 20%. Not eligible: unitary and applied
heat pumps.
System ID
SEER, EER, &
IEER
Exp 9 Cooling equipment with energy recovery. Spaces served shall have
year-round design cooling loads from lights and equipment greater than
5 watts per square foot. Energy recovery system shall utilize recovered
energy for on-site space heating or preheating of service hot water.
Provide calculations to the code official that demonstrate the amount of
recovered energy used for on-site heating purposes is equivalent to the
annual energy that would be saved by the cooling system with air
economizer per C403.3.
System ID
Lighting +
Equipment
Loads (W/sf)
2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1
Economizer Exceptions, cont. MECH-ECONO
2015 Washington State Energy Code Compliance Forms for Commercial Buildings including R2 & R3 over 3 stories and all R1 Revised January 2017
Project Title:
Date 5/1/2017
Economizer
Exception
Summary
Refer to Section
C403.3 for
descriptions of
economizer
provisions and
exceptions. For
alterations refer
to Section
C503.4 and
Table C503.4.
ECONOMIZER EXCEPTIONS - NEW CONSTRUCTION AND ADDITIONS, CONTINUED
Exp 10 Cooling equipment for dedicated server, electronic equipment or
telecom switch rooms. Per building limit for this exception is
240,000 Btu/h cooling capacity or 10% of required building air
economizer capacity, whichever is greater. Part load control
required over 85,000 Btu/h. Additional requirements apply.
Option a - Cooling equipment efficiency shall be 15% better than
the WSEC required minimum efficiency..
Option b - Waterside economizer required. Cooling equipment
efficiency shall be 5% better than the WSEC required
minimum efficiency.
Option c - Waterside economizer required. All cooling equipment is
subject to ASHARE Standard 127.
System ID
Compliance
Option
Cooling
Capacity
(Btu/h)
Total Claimed Exempt Capacity:
Total building air economizer capacity (if claimed > 240 kBtu/h):
Alternate Exp 10 Capacity Limit:
ECONOMIZER EXCEPTIONS - MECHANICAL SYSTEM ALTERATIONS OR REPLACEMENT
C503.4 Pre -approved design alternative to full compliance with air economizer
Exp 1 requirement. An alternative for mechanical system alterations where existing
building constraints make full compliance with air economizer requirement
impractical. Provide calculations to the code official that demonstrate the
proposed altemate design strategy provides similar energy savings to the
annual energy that would be saved by the cooling system with air economizer
per C403.3.
System ID
Alt. Strategy
ECONOMIZER EXCEPTIONS - SIMPLE SYSTEMS
C503.4
Exp 2
Qualifying small equipment. Per unit limit less than 33,000 Btu/h. Per
building limit for this exception is 72,000 Btu/h cooling capacity or 5% of
required building air economizer capacity, whichever is greater. Cooling
equipment efficiency shall be 15% better than WSEC required minimum
efficiency. Not eligible: non -unitary equipment, unitary equipment installed
outdoors or in mech room adjacent to outdoors, equipment installed during
new construction, shell -and -core construction, or initial tenant
improvement.
System ID
Cooling
Capacity
(Btu/h)
Total Claimed Exempt Capacity:
Total building air economizer capacity (if claimed > 72,000 Btu/h):
Alternate C503.4 Exp 2 Capacity Limit:
C503.4 Equipment that provides hydronic chilled water for chilled water terminal
Exp 3 units. Equipment part load cooling efficiency (IPLV) shall be better than
WSEC required minimum efficiency by at least 25%. Per building limit
for this exception is 480,000 Btu/h cooling capacity or 20% of required
building air economizer capacity, whichever is greater. Chilled water
terminal units serving Group R occupancies are not included in the
building capacity total.
System ID
Cooling
Capacity
(Btu/h)
Total Claimed Exempt Capacity:
Total building air economizer capacity (if claimed > 480,000 Btu/h):
Alternate C503.4 Exp 3 Capacity Limit:
Table Compliance Options for alteration or replacement of existing
C503.4 mechanical cooling equipment per Table C503.4. Refer to table
and all applicable table footnotes for full requirements. Applies to
the following retrofit conditions:
Option a - Any new or replacement equipment
Option b - Replacement equipment of same type with same or
smaller cooling output capacity.
Option c - Replacement equipment of same type with large
cooling output capacity.
Option d - New equipment added to existing system or
replacement equipment that is different than existing
being replaced.
System ID
Equipment
Type
Compliance
Path
2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1
Mechanical Fan System Power Allowance
MECH-FANSYS-SUM
2015 Washington State Energy Code Compliance Forms for Commercial Buildings including R
Project Title: Clear Sign
Date 5/1/2017
For Building Dept. Use
HVAC Air Distribution System Schedule
List all HVAC systems that have the capability to provide heating and/or cooling to the spaces they serve.
System or
Primary Supply
Fan ID
Speed Control
(Note 1)
Description
(Note 2)
System Total
Nameplate HP
(Note 3)
Fan Power
Calculation
Required
(Note 4)
R-ru, i I
0,V
4-8 VL. ._ G 3 Q o' -/-o-)
%�
Al O
12
'.v
g\f1, - C 04-03
1f2
)3
SAS?KC04
to
i
) 5
e. V
1 -EBV)- f a? -f0 LOD
i /2.
Note 1 - Constant Volume (CV), Variable Air Volume (VAV), or Hospital/Lab CV system that qualifies for VAV budget per C403.2.11.1 Exception 1.
Sing e zone VAV systems shall comply as CV.
Note 2 - Describe system type and list all fans (or groups of fans) associated with the delivery and removal of conditioned air by the system. Include
all supply, return/relief, exhaust and exhaust hoods (>1 hp), make-up air, dedicated outside air (DOAS), booster fans, and series fan -powered
terminals. VAV parallel fan -powered terminals and economizer relief fans do not need to be included if the fans do not operate at peak
conditions.
Note 3 - Enter the total nameplate hp of all fans associated with the delivery and removal of conditioned air by the system.
Note 4 - This form automatically identifies whether a MECH-FANSYS form is required to demonstrate compliance with the fan power allowance (Yes),
or this information is not required because the system has a combined total nameplate motor hp that is 5 hp or less (No)
MECH-FANSYS Forms
A MECH-FANSYS form shall be provided for each system with total nameplate hp greater than 5 hp. Select (Add Fan
System Form) to generate an additional form. Added forms can be deleted with button in cell E32 of the added form.
2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1
Mechanical Fan System Power Allowance
MECH-FANSYS
2015 Washington State Energy Code Compliance Forms for Commercial Buildings including R
Project Title: Clear Sign
Date 5/1/2017
A separate MECH-FANSYS form must be completed for every HVAC system that exceeds the
5 hp threshold.
For Building Dept. Use
Fan System ID
S stem Su 1 Fan
Y PP Y
Speed Control
Constant Volume (CV), Variable Air
Volume (VAV), or Hospital/Lab CV
system that qualifies for VAV budget per
C403.2.11.1, Exception 1
Compliance Option
Compliance is based upon either the fan motor nameplate horse power
(Option 1), the fan brake horsepower (Option 2), or C403.7 high efficieny
VAV fan brake horsepower (10% less than Option 2). The bhp calculation
provides adjustments for special equipment per Table C403.2.11.1(2).
Fan System Supply
Y pP y
CFM Total
-
In Fan Equipment Schedule below, provide maximum design supply airflow
rate (CFM) of all supply fans serving the conditioned space in Fan
Equipment Schedule below. Fan System CFM Total is the supply airflow of
the central air handler at peak design conditions. Additional volumetric air
flow provided at zone fan terminals, booster fans, or through induction is
not included in the supply CFM total. However, the fan power of this
equipment is included in the HP and BHP calculations. Fan System
Supply CFM Total is automatically calculated by the form.
Fan Equipment Schedule
Fan ID and Location
Fan Type
Quantity of Fan Type
Total CFM
(Note 1)
Total Nameplate
HP (Note 2)
Total BHP
(Note 3)
Note 1 - Total CFM is the maximum CFM of the listed fan(s) when
operating at peak design operating conditions.
Note 2 - Total namplate hp of the listed fan(s).
Note 3 - Total brake horsepower (bhp) of the listed fan(s) at peak
design operating conditions. Not required
if Nameplate HP compliance option chosen. Compliance Message:
Total Proposed:
Total Allowance:
Brake Horsepower Allowance Adjustments
Device Type
Description and Location
CFM thorough this
device (CFMD)
Assigned Pressure
Drop, PD in w.c.
(Note 6)
Calculated
Pressure Drop,
PD in w.c.
(Note 7)
Adjustment,
A in bhp
(Note 8)
Note 4 - Bhp allowance for energy recovery devices and run around coil loops includes both air Total Adjustment (bhp):
streams. so the CFMD is the sum of the sunnly CFM anti arhaust CFM if hi -/h nn lhrn„nil
the device.
Note 5 - Energy recovery effectiveness is defined as change in the enthalpy of the outdoor air supply
divided by the enthaply difference between the outdoor air and return air at design conditions.
Note 6 - Assigned pressure drop (PD) adjustment per Table C403.2.11.1(2).
Note 7 - Pressure drop (PD) adjustment shall be calculated per the applicable method
defined in Table C403.2.11.1(2) based on specific system conditions.
Note 8 - A = PD * CFMD/4131 where A is the allowed system brake horse power
adjustment, PD is pressure drop allowance, and CFMD is the cfm through the device.
2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1
General Instructions:
A. Include all fans directly associated with the delivery and removal of conditioned air to the zones served by the system. Enter CFM and brake
horsepower (bhp) of each fan at peak design conditions and the nameplate horsepower (hp). Include supply, return and relief fans, exhaust
and exhaust hood fans (>1 hp), booster fans and fans included as part of make-up air units, dedicated outside air systems (DOAS), energy
recovery ventilators (ERV), and series fan -powered terminal equipment.
B. VAV parallel fan -powered terminals and economizer relief fans do not need to be included if the fans do not operate at peak conditions.
C. Fans not directly associated with the delivery and removal of conditioned air, such as condenser fans, do not need to be included in the fan
power total.
D. Fan power calculations are not required for non -central air HVAC systems such as 4 -pipe fan coils and variable refrigerant flow (VRF) systems
unless individual fan systems are greater than 5hp.
E. In the Brake Horsepower Allowance Adjustments table, if a Device Type is selected that has an Assigned Pressure Drop, this value will autofill
into the Assigned Pressure Drop cell and the Calculated Pressure Drop cell will be write -protected. If the Device Type requires a Calculated
Pressure Drop, then enter this value into the Calculated Pressure Drop cell and the Assigned Pressure Drop cell with be write -protected.
F. Refer to FAQ section of MECH-FANSYS-DOC for additional instructions.
2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1
Fan Power Allowance Adjustment Factors
2015 Washington State Energy Code Compliance Forms for Commercial Buildings including R2 & R3 over 3 stories and all R1
MECH-FANSYS-DOC
Revised January 2017
TABLE C403.2.11.1(2)
FAN POWER LIMITATION PRESSURE DROP ADJUSTMENT
Device
Adjustment
Credits
Fully ducted return and/or exhaust air systems
0.5 inch w.c. (2.15 inches w.c. for laboratory and vivarium systems)
Return and/or exhaust air flow control devices
0.5 inch w.c.
Exhaust filters, scrubbers, or other exhaust treatment
The pressure drop of device calculated at fan system design condition
Particulate filtration credit: MERV 9 - 12
0.5 inch w.c.
Particulate filtration credit: MERV 13 - 15
0.9 inch w.c.
Particulate filtration credit: MERV 16 and greater and electronically
enhanced filters
Pressure drop calculated at 2x clean filter pressure drop at fan system
design condition
Carbon and other gas -phase air cleaners
Clean filter pressure drop at fan system design condition
Biosafety cabinet
Pressure drop of device at fan system design condition
Energy recovery device, other than coil runaround loop
(2.2 x energy recovery effectiveness) — 0.5 inch w.c. for each airstream
Coil runaround loop
0.6 inch w.c. for each airstream
Evaporative humidifier/cooler in series with another cooling coil
Pressure drop of device at fan system design conditions
Sound attenuation section (fans serving spaces with design background
noise goals below NC35)
0.15 inch w.c.
Exhaust system serving fume hoods
0.35 inch w.c.
Laboratory and vivarium exhaust systems in high-rise buildings
0.25 inch w.c./100 feet of vertical duct exceeding 75 feet
Deductions
Systems without central cooling device
-0.5 inch w.c.
Systems without central heating device
-0.3 inch w.c.
Systems with central electric resistance heat
-0.2 inch w.c.
w.c..= water column.
For SI: 1 inch w.c..= 249 Pa, 1 inch.= 25.4 mm.
2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1
Design
2015 Washington
Load Calculation Summary MECH-LOAD-CALC
State Energy Code Compliance Forms for Commercial Buildings including R2 & R3 over 3 stories and all RRevised January 2017
Project Title: Clear Sign
Date 5/1/2017
The following information shall be included in the load calculation program summary submitted with
the permit documents. If a load calculation summary is not available, provide the required information
below.
For Building Dept. Use
Equip. ID
Area(s) Served
Heating Design
Load in Btu/h (Note
1)
Cooling Design
Load in Btu/h (Note
1)
Calculation Method
(Note 2)
Notes
Note 1 - Design load shall account for the building envelope, lighting, ventilation and occupancy loads of the space(s) served by the
mechanical system. Heating and cooling loads shall be adjusted to account for load reduction achieved by an energy recovery
system, if applicable.
Note 2 - Computer load calculation program, worksheet (identify source), or equivalent computation procedure in accordance with ASHRAE
Standard 183.
UNIT SIZE 48
NOMINAL CAPACITY(ton)
OPERATING WEIGHT (Ib)
'COMPRESSORS• 1
Quantity
REFRIGERANT'
REFRIGERANT METERING DEVICE
CONDENSER COIL
Rows
Fine/in.
CONDENSER FAN •
Nominal Airflow (Cfm)
Nominal Speed (Rpm)
Quantity. Diameter (in.)
Motor (single-phase)
three-phase)
EVAPORATOR COIL
Rows
Fins/in.
EVAPORATOR FAN
Nominal Cfm
Nominal Speed (Rpm)
Diameter x Width (1n.)
Motor HpsIngle-phase)
(three-phase)
FURNACE SECTION
Burner Orifice No.
(Qty..drlli size)
Natural Gas
Burner Orifice No.
(Q...drill size)
Propane Gas
Pilot Orifice Diameter
(in....drill size)
Natural Gas
Pilot Orifice Diameter (in.)
Propane Gas
RETURN -AIR FILTERS (sq In.)t
Disposable
Cleanable
UNIT SIZE 4B
NOti ifiti OATACITi iilinj • -
OPERATING WEIGHT (Ib) 496
COMPRESSORS
Quantity
REFRIGERANT'•
REFRI ERANT METERING DEVICE
CONDENSER COIL
Rows
Flne/in.
CONDENSER FAN
Nominal Airflow (Cfm)
Nominal Speed (Rpm)
Quantity.„Diameter (in.)
Motor Hp (single-phase)
(three-phase)
EVAPORATOR COIL •
Rows
Fins/fn.
0u
NLT018;'i INNLT024 i NHT024 ; NLT030 IN I, NHT030 NLTO3B T0
NM3B I NET036 1NHTO38
1 /s-� 2 —Iii;
j --...,..Y_ 1
450 4541 [ 460 470 11 476 1 480 486 I. _490 ) 490 I 590
Reciprocating Hermetx 3500 Rpm
1
- . -01-22. - -
AccuRaterm Piston
FILE
600
2 44
2 55
1
20
288
192
2 44
2 55
2000
825
'/10
800 1000
10 x 8
I
3 44
3 55
2 44
2 55
528
352
3 44
3 55
1 20
3
14
1100
4 44
4 55
018 77
.009
2
20
I
1,6
3 44
3 55
624
416
1/4
1
2500
1100
1200
10 x 10
4...44
4.. 55
4 ..42
4 ..54
2500'•
300011
825”
110011
1/10
5 44
5 55
720
480
1200
596
6 44
6 55
N1:7042INMT0421N37042INHTO42INVT042INLT048INMT048NHT048�NVT048 NLT060INMTO60INHT08OINVf06O
604 I Bio I 616 I Teiii
EVAPORATOR FAN - -
Nominal Cfm
Nominal Speed (Rpm)
Diameter x Width (in.)
Motor Hp (single-phase)
(three-phase)
FURNACE SECTION
Burner Orifice No.
(01y...drill size)
Natural Gas
Burner Orifice No.
(Qty...drill shoe)
Propene Gas
Pilot Orifice Diameter
(in....drill size)
Natural Gas
Pilot Orifice Diameter (In.)
Propene Gas
RETURN -AIA FILTERS (sq in.)t
Disposable
Cleanable
'Operating charge is listed on unit nameplate
tRequlred fietd-supplied filter areas are based on the larger of the ARI•rated (Air
Conditioning & Refrigeration Institute)
pceoolin airflow or the heating airflow at a
vfilterrppressure y ot 0drop must noott�exaceed 0 08 In ft/min or 450 for high-capacity type Air
3 44
3 55
Ih
1/2
I.
—too -1550 558 574 SBO • 586 588
Reciprocating Heetic, 3600 Rpm
1rm
2500 3000
4 44
4 55
1400
4 .42
4 ..54
720
480
5 44
5 55
3
14
6. 44
6.. 55
Accufiateriliiston •
34
'/i
3/e
34
3 5
2
20
3500
1100
1 20
RECEIVED
CITY OF TUKWILA
JUf 21 2017 ..
100 RvDEWED F R
COVE COMPLIANCE
- - APPROVE -
4 55
3 44
5.. 55 6 54 i 3 55
01
8Crof Tukwila
BLLDING DIVISION
816
544
4
'Single-phase units
ttThree-phase units
4.. 44
4 55
960
640
5 44
5 55
6 42
6 54
lAWOOtt-
1
Physical data
Evisiti 'j
BASE UNIT 48
NOMINAL
WE004
LJD/LJE005 j
WD/LJEO08
LID/.1E007
CAPACITY(tone) _
3
4
5
6
OPERATING WEIGHT (Ib)
Unit
With Economizer
Roof Curb
COMPRESSOR
64 574
115
115
560
115574 594
819
1116
Quantity
011 (oz)
REFRIGERANT
1
55
Hermetic
55 70
70
TYPE
Operating Charge (Ib.oz)
R-22
3-13 5-8 8.11
9-0
CONDENSER FAN
Quantity•Diameter (In.)
Nom Cfm
Motor Hp...Rpm
CONDENSER
1 .26
35004100
1,4 .850
Propeller
1 .28 1.. 28
3800
, 4100 850 1 850 1 850
COIL
Rows...FinsAn.
Total Face Ares (aq ft)
1...17
7.78
Enhanced Copper T
° .Aluminum Lanced Fin
17
12.25 12 25
2...17
22
12.25
EVAPORATOR FAN
Syizepe(D►)ve
Nominal Cfm
Horsepower per National
Electrical Code
Maximum Continuous (NEC)Bhp
Motor Frame
Nominal Rpm High/Low
Fen Rpm Range
Motor Bearing Type
Maximum Fan Rpm
Motor Pulley Pitch Diameter
AB (In.)
Fan Pulley Pitch Diameter (In.)
n.)
Pulley Center L e Dingthstance (In.)
Speed Change Per Full Tum of
Movable Pulley Flange (rpm)
Movable Pulley Maximum Full
m
Turns from Closed Position—
FaFd Speed -Setting (rpm)pe Open
Fan ShaftDiameterat Pulle(In.)
10Dx lt0
1200
%
38
48
880/!45
—
Ball
2100
—
—
—
—
—
—
—
Centrifugal
10 x 10
6Dir001
1
1600
1/2
87 48.70
1080/970
—
Ball
2100
—
—
—
—
—
—
—
gal 10 x 10
Belt
2000
1 0
—
875-1190
Ball
2100
2.83 8
5 5
A..15
14 7.15 5
63
5
3
875
"/e
10 x 10
Bot
2400
1.5
E 6
�_
1070.1480
Ball
2100
2.8-3.8
4 5
A.. 139
14 7-15 5
5
78
b
3
1230
%
EVAPORATOR COIL
Rows...Fins/In.
Total Face Area (sq ft)
2...15
4.17
Enhanced Copper Tubes,
2...15
5 5
Aluminum Double -Wavy Fin
3.. 15 4...15
5 5 5 5
FURNACE SECTION
Bumer Orifice Diameter (In. ...drill slze)t
Natural Gas — Std
Liquid Propane — Alt
Thermostat Heat Anticipator Setting (amps)
208/230/460 v
Gas
elIennp�utt74.000
Temperature RiseRange(%)
Manifold Pressure (In. wg)
Natural Gas — Std
Liquid Propane — Alt
Maximum Static Pressure (In. wg)
Field Gas Connection Size (in.)
113 33
089 43
1.0
25-55
3.5
3.9
75
.5
113 .33
089...43
1 0
74,000/115,00080
25-55/35-65
3 5
75
5
113 33
089. 43
74,00015,000
25-55/35-65
3.3 5
5
7
75
5
.113 33
089 43
74,000/115,000
0
25-55/3585
3.5
75
75
5
OUTSIDE -AIR INLET SCREENS
Quantity...Size (In.)
RETURN -AIR FILTERS
C eanable
1..20
..,___
x 24 x 1
..
Quantity...Size (In.)
2...16x25x2
LEGEND
Bhp — Brake Horsepower
'Used to determine wire sizing per NEC.
tThe 481..10005-007 and 48LJE004 (74,000 Btuh) units have 2 burners
The 4814E005-007 (115,000 Btuh) units have 3 burners
4
REVIEWED FOR
CODE COMPLIANCE
APPROVED
JUL. 17 2011
City of Tukwila
BUIL
p
United Technologies
SUBMITTAL
Project
Gateway Clearsign
Date
Monday, May 15, 2017
FIL
RECEIVED
CITY OF TUKWILA
JUN 21 2017
PERMIT CENTER
M11'OO'ti-6
X5115/2017
Prepared By:
#11 - 2.5T GasEle
Project: Gateway Clearsign
07:45AM
#11 - 2.5T GasEle
Tag Cover Sheet
Unit Report
Certified Drawing
Performance Report
Packaged Rooftop Builder 1.47 Page 2 of 7
X5/15/2017
Prepared By:
Unit Report For #11 - 2.5T GasEle
Project: Gateway Clearsign
07:45AM
Unit Parameters
Unit Model. 48VL-C300403
Unit Size• 30 (2.5 Tons)
Volts -Phase -Hertz. 208-1-60
Heating Type: Gas
Duct Cfg: Vertical Supply / Vertical Return
40,000 Btuh
Standard Unit
Warranty Information.
1 year warranty on parts
5 year warranty on compressor
5 year warranty on heat exchanger
No optional warranties were selected.
Dimensions (ft. in.) & Weight (11b.)***
Unit Length: 4' 0.1875"
Unit Width: 2' 8.625"
Unit Height: 3' 9.75"
*** Weights and Dimensions are approximate. Weight does not include roof
curbs, unit packaging, field installed accessories or factory
installed options. Approximate dimensions are provided primarily for
shipping purposes. For exact dimensions and weights, refer to appropriate
product data catalog.
Total Operating Weight: 336 Ib
NOTE: Please see Warranty Catalog 500-089 for explanation of policies and ordering methods.
Ordering Information
Part Number
Description
Quantity
48VL-C300403
Rooftop Unit
1
Base Unit
Accessories
CPCRKHTR008A00
240V Crankcase Heater
1
CPECOMZR007B00
ACC -ECONOMIZER VERT 2016 SPP
1
Packaged Rooftop Builder 1.47 Page 3 of 7
Certified Drawing for #11 - 2.5T GasEle
Project: Gateway Clearsign 05/15/2017
Prepared By: 07:45AM
1111
EM40RIX0tf4O&0
vur I.
2110 KIWI M..t0
- EMT, 00 0M116 11/101
If
llnl-IlO0IM41I11111
1410111.140
001
30
133.1
IS -1r1 •
11
52-11111 I0.4
4.32,0
311,
t
13-11/11
1111
460.-.1001.0/0.1.
11/41-.180.00.10/11/0.10!91113-1.40,.41111-1-11.114-1-0
.31,11-1-10
331
111
ISLE
14.1
IS -I1
21-0101
110
-II.
02-11111 150.4
11.11/1111E4
11.1/11
151111
11
Ilei
1-110.1 1111
11-2.8
n
125.1
IWMOIOII TOP VIEWD--7201104 0011
11e
4il Iff l� [it` 5411
5114
07.11
COM91g
P
2e
en
[1tNr.0
0••
1201
FRONf VEW
10: 1
-14111
MONT SEE
10.0 V
4 7' 111,1j •.l.1
QM= 10 *nuns' 39L
1483 1-I
1C' R 1911 .. � 4 051.1
4111 011[ 22 IRI.. - 1 125.11
117E N001111 �Eri 1 1412.72
71ttd 2MR
MC NOO CLAW=1
/0.211II Mtfl 07113 EIr17 411E f t Te�N1
1701 421 01054• 4 33411[3. roe 40 21M 010 09:2.11
4.m1244 00454 < 111 111 TIE
[net 110E 10.721.01
IMIUME IMO A 010011:1111113 Mm
AIRS
191 nNEI9I. 47 110:°1M1
0001 rp11� NEC MIIMIENTI,
1411727211 1(111
n ❑r:9d1
• 19:1.41
n 13.1,114
•011091 DISt1923 Si21lEnTA[4 1411021[ r1lllll ,lwA[ t'b�ll F11I
01011.10/1 Ir II 111 IIS -
02.10~�./ip0111_� 1012.11
GAR VIM
fin 5 OD 40
Packaged Rooftop Builder 1.47 Page 4 of 7
If
4(722
4X
01J1l\•
•
F[TEn
7211[724
0 .
- 1==1.
040
02.10~�./ip0111_� 1012.11
GAR VIM
fin 5 OD 40
Packaged Rooftop Builder 1.47 Page 4 of 7
SUBMITTAL =MicroMefl
112/10/2015
FORM NO. 7859-1 D
Submitted To:
Company:
Job Name:
Notes:
No Units Selected
Part Number.
ECD-SDSML-ADB-CD
Econo. Part No.
ECD-SDSML-ADB-CD
ECD-SDSML-ENT-CD
ECD-SDSML-DENT-CD
Supply air cover
panel. Shipped on
HVAC unit.
Controls
Dry Bulb
Enthalpy
Differential Enthalpy
FsAam$:
• Economizer for down application only.
• Fully assembled, easy to install.
• 2" Filter rack and 1" TAW filters provided.
• Rainhood ships assembled, includes a water
entrainment filter and is constructed of prepaint steel.
• Low leak outside air damper.
• Barometric relief damper.
Carrier Equivalent: CPECOMZR007A00
FILTER RACK SIZE
1" Filters
2" Filters
(2) 12" x 20" x 1"
(1)10"x20"x 2"
(1)12"x20"x 2"
NOTES:
1. Relays required for heat pump and duel fuel units can be
field supplied or order MMC kit SPP09-HPRLYKIT01.
2. Economizer should not be used on XL,XT INFINITY units.
3. Economizer includes hamess extensional for older units
with no economizer harness factory installed.
4. The "NC" economizer models do not include actuator,
controller, sensors, or wiring hamess.
Replacement panel
shipped with
economizer (some
newer units will
include this panel)
Filters provided
Panel for
filter and
controls access
Economizer
outside air
damper
Economizer's
barometric relief
damper
InIJ UVUUMtnI IJ IMt VNUYtRI T Ur MR.KV
Rainhood with
water entrainment
filter
SIDE VIEW
Down Discharge
Aluminum water
entrainment
filter
I.UKYUKX l I V n MIVU I UtLI VtKtU UYUN Int tAYKtbJ LUP11.11 I IUIV I nMI Int UUry 1 to 1 J WILL NV
U VK UJtU VVI I NUL/ I mlKVmt IL VVKI I I to (.UKJt V
MicroMetl Corporation... Indianapolis Indiana —1-800-662-4822, Sparks Nevada — 1-800-884-4662, Longview Texas —1-903-248-4800
Notes:
1.1.5" ADDED TO OLD CURB O.D
2. MATERIAL: 18 ga. GALVANIZED STEEL
3. GASKET PROVIDED WITH CURB
4. INSULATION: 1" 1 1/2 LB DENSITY
33 13/16'
12 1/411 1/4'
17 5/8'
L
INSULATED
COVER
461/16'
1 3/4"
5'
i
47 12'
P
Attn: Tag:
Approval:
EXISTING CURB LAYOUT
46'
43 3/4'
26 1/2'
1912'
21/4'
2 1/4'
19 12'
RETURN
SUPPLY
39 1/2'
CURB SHOWN IS CDI STANDARD CONFIGURATION CDI RESERVES THE RIGHT TO
CHANGE LAYOUT WITHOUT NOTIFICATION. IF CURB IS NEEDED IN A
DIFFERENT CONFIGURATION CDI MUST BE NOTIFIED PRIOR TO PLACING AN ORDER.
REVISIONS
REV.
DESCRIPTION
DATE
APPROVED
6/23/2006
APPRovuS
DATE
157.35
SUPPLY GPPLYAN RETURN OPENING
'NOTE ANYVERN, SU CHANGES
'FAX BALI( IMN F ANY
IS OK AR I8
Thurs@ry, S0p16m11er 17, 2075 8:17:17 AM
1-4695-4021small
QUOTE #:
17685 TYLER ST NW
CDI (763 IVER MN 8
1-4695.4021small
mu. 1:15 1 ear, 1 a 3
X5/15/2017
Prepared By:
Performance Summary For #11 - 2.5T GasEle
Project: Gateway Clearsign
07:45AM
Part Number:48VL-C300403
ARI SEER. 14.00
Base Unit Dimensions
Unit Length.
48.2 in
Unit Width: 32.6 in
Unit Height 45.8 in
Total Operating Weight 336 Ib
Unit
Unit Voltage -Phase -Hertz 208-1-60
Air Discharge. Vertical
Fan Drive Type. Direct
Actual Airflow. 932 CFM
Site Altitude* 0 ft
Cooling Performance
Condenser Entering Air DB: 95.0 F
Evaporator Entering Air DB: 80.0 F
Evaporator Entering Air WB: 67.0 F
Entering Air Enthalpy 31.44 BTU/lb
Evaporator Leaving Air DB. 59.9 F
Evaporator Leaving Air WB• 57.5 F
Evaporator Leaving Air Enthalpy. 24.70 BTU/lb
Net Cooling Capacity: 28.25 MBH
Net Sensible Capacity: 20.22 MBH
Total Unit Power Input: 2.47 kW
Coil Bypass Factor 0.035
Heating Performance
Heating Airflow: 932 CFM
Entering Air Temp• 70.0 F
Leaving Air Temp: 102.8 F
Gas Heating Input Capacity. 40.0 MBH
Gas Heating Output Capacity. 33.0 MBH
Temperature Rise• 32.8 F
AFUE (%). 81.0
Supply Fan
Extemal Static Pressure. 0.30 in wg
Options / Accessories Static Pressure
Economizer 0.14 in wg
Wet Coif 0.06 in wg
Total Application Static (ESP + Unit Opts/Acc.)• 0.50 in wg
Fan RPM• 1050
Fan Power 0.38 BHP
Fan Motor Size, hp• 1/2
NOTE• High Motor Speed, Vert
Electrical Data
Minimum Voltage: 197
Maximum Voltage. 253
Compressor RLA• 11.2
Compressor LRA• 57
Outdoor Fan FLA (ea)• 0.7
Indoor Fan Motor FLA. 3.8
Power Supply MCA• 18.5
Power Supply MOCP (Fuse or HACR)• 25
Control Panel SCCR: 5kA RMS at Rated Symmetrical Voltage
Packaged Rooftop Builder 1.47 Page 5 of 7
D5/15/2017
Prepared By:
Performance Summary For #11 - 2.5T GasEle
Project: Gateway Clearsign
07:45AM
Acoustics
Sound Rating: 73.0 db
Sound Power Levels, db re 10E-12 Watts
Discharge Inlet Outdoor
63 Hz NA NA NA
125 Hz NA NA 58.1
250 Hz NA NA 59.4
500 Hz NA NA 61.2
1000 Hz NA NA 64.1
2000 Hz NA NA 59.2
4000 Hz NA NA 56.8
8000 Hz NA NA 50.9
Advanced Acoustics
Advanced Accoustics Parameters
1. Unit height above ground. 30.0 ft
2. Horizontal distance from unit to receiver. 50.0 ft
3. Receiver height above ground: 5.7 ft
4. Height of obstruction: 0.0 ft
5. Horizontal distance from obstruction to receiver 0.0 ft
6. Horizontal distance from unit to obstruction: 0.0 ft
Detailed Acoustics Information
Octave Band Center Freq. Hz
63
125
250
500
1k
2k
4k
8k
Overall
A
0.0
58.1
59.4
61.2
64.1
59.2
56.8
50.9
68.3 Lw
B
-
26.2
42.0
50.8
58.0
64.1
60.4
57.8
49.8
67.1 LwA
C
0.0
25.7
27.0
28.8
31.7
26.8
24.4
18.5
36.0 Lp
D
-
26.2
9.6
18.4
25.6
31.7
28.0
25.4
17.4
34.7 LpA
Legend
A Sound Power Levels at Unit's Acoustic Center, Lw
B A -Weighted Sound Power Levels at Unit's Acoustic Center, LwA
C Sound Pressure Levels at Specific Distance from Unit, Lp
D A -Weighted Sound Pressure Levels at Specific Distance from Unit, LpA
Calculation methods used in this program are patterned after the ASHRAE Guide; other ASHRAE Publications and the AHRI
Acoustical Standards. While a very significant effort has been made to insure the technical accuracy of this program, it is assumed
Packaged Rooftop Builder 1.47 Page 6 of 7
J5/15/2017
Prepared By:
Performance Summary For #11 - 2.5T GasEle
Project: Gateway Clearsign
07:45AM
that the user is knowledgeable in the art of system sound estimation and is aware of the tolerances involved in real world acoustical
estimation. This program makes certain assumptions as to the dominant sound sources and sound paths which may not always be
appropriate to the real system being estimated. Because of this, no assurances can be offered that this software will always generate
an accurate sound prediction from user supplied input data. If in doubt about the estimation of expected sound levels in a space, an
Acoustical Engineer or a person with sound prediction expertise should be consulted.
Packaged Rooftop Builder 1.47 Page 7 of 7
Units 12 and 15
Project: Gateway Clearsign
Prepared By:
05/15/2017
07:56AM
Units 12 and 15
Tag Cover Sheet
Unit Report
Certified Drawing
Performance Report
Packaged Rooftop Builder 1.47 Page 1 of 6
Unit Report For Units 12 and 15
Project: Gateway Clearsign
Prepared By:
05/15/2017
07:56AM
Unit Parameters
Unit Model. 48VL-C240403
Unit Size: 24 (2.0 Tons)
Volts -Phase -Hertz: 208-1-60
Heating Type. Gas
Duct Cfg• Vertical Supply / Vertical Return
40,000 Btuh
Standard Unit
Warranty Information
1 year warranty on parts
5 year warranty on compressor
5 year warranty on heat exchanger
No optional warranties were selected.
Dimensions (ft. in.) & Weight (Ib.) ***
Unit Length: 4' 0.1875"
Unit Width. 2' 8.625"
Unit Height: 3' 7.75"
*** Weights and Dimensions are approximate. Weight does not include roof
curbs, unit packaging, field installed accessories or factory
installed options. Approximate dimensions are provided primarily for
shipping purposes. For exact dimensions and weights, refer to appropriate
product data catalog.
Total Operating Weight. 304 Ib
NOTE: Please see Warranty Catalog 500-089 for explanation of policies and ordering methods.
Ordering Information
Part Number
Description
Quantity
48VL-C240403
Rooftop Unit
2
Base Unit
Accessories
CPCRKHTR008A00
240V Crankcase Heater
2
CPECOMZR007B00
ACC -ECONOMIZER VERT 2016 SPP
2
Packaged Rooftop Builder 1.47 Page 2 of 6
Certified Drawing for Units 12 and 15
Project: Gateway Clearsign 05/15/2017
Prepared By: 07:56AM
nn
4,11n4111tw4.BN4)34
11((11-3rcf0m.m74ln
41111•„1431011/010311154411
ftnitn
tuwtm.rzn
44,411,-10
n1.x-1-w
1EIRn•140. 3 1714-11. 241-1-10
jI 1»r .571 In.n 1 ::e-
a
f2 ,11
Obi 414.4
t.wi 313E VEW
340441011m •. 14001111
VIEW
[1113.11
MS e5
` ��
1 447141
1111PII,4¢
(1x21.11
110414
1 n
FRONT NEM
IR• 122 21 144. ICI
roma em
7.1.14 15.514
31,.,1
1D-111
Olt tt.
71f 111140 I,/41,
t1Hll Cr 4.441. I,,,,
u
401
147
un<
Cat
7.1/4
31-I4l
1111
ue
❑115
1r-14/11
SI -11/1{
12-./I1
13.4
11,.4
511.4
IMAM OLIN= 13 p IMS MIR
:5.3111
15-1/11
:5.0,14
341.1
1111.1
341.,
15-11,14
:.11/111
11-1111
In.1
411.1
4tt4
411 44( (0 1221 14 4450.41.1
Il% Vtllrz 0arf 1 315.14
11,0 (2(44 41 150.41
EL MAO 1iMtl/m
411.01, 0011,..0444 4.404 4441 ) (00(4.14w1
11;[T'441 (420n1w te;ji[ 444112(1 Im.ntt 444 315. n
atW1tt1 21.1Of10E4. 414[0 hit: elan 24 (1:41.11
IUM CINIMIIO 09.11.11 `p MOB
[,H. 406 rK[at flit... .. 1 INIB1141Y1
5[ EIT1M 1It4E0110BFYf. i) [444.111
4I4 7.:2E"1114. 14(171, 4!
Darr.....,.
.44,I1" OIfr4SFF:3431�E1rTf1[40f 041 U4) 142, (1 141, 141 0402 2(11
OM -UM It II AK Ion
151.11 C
1141..
44101,
0.1,4
1130.45 f-, a
151111.. �00 p .=. 0
{s»n1 — 144 4:41 /4 A 14;4441
10.11
RIfIFR SEE VIEW
REM NO
OSVLS00101
Packaged Rooftop Builder 1.47 Page 3 of 6
SUBMITTAL
FORM NO. 7859-1 D
MicroMet
112/10/2015
Submitted To:
Company:
Job Name:
Notes:
No Units Selected
Part Number.
ECD-SDSML-ADB-CD
Econo. Part No.
ECD-SDSML-ADB-CD
ECD-SDSML-ENT-CD
ECD-SDSML-DENT-CD
Supply air cover
panel. Shipped on
HVAC unit.
Controls
Dry Bulb
Enthalpy
Differential Enthalpy
Features:
• Economizer for down application only.
• Fully assembled, easy to install.
• 2" Filter rack and 1" TAW filters provided.
• Rainhood ships assembled, includes a water
entrainment filter and is constructed of prepaint steel.
• Low leak outside air damper.
• Barometric relief damper.
Coil
Replacement panel
shipped with
economizer (some
newer units will
include this panel)
Panel for
filter and
controls access
I MI0 0VI.
Economizer
outside air
damper
Economize 's
barometric relief
damper
Carrier Equivalent: CPECOMZR007A00
FILTER RACK SIZE
1" Filters
2" Filters
(2)12"x20"x 1"
(1)10"x 20" x2"
(1)12"x 20"x 2"
NOTES:
1. Relays required for heat pump and duel fuel units can be
field supplied or order MMC kit SPP09-HPRLYKIT01.
2. Economizer should not be used on XL,XT INFINITY units.
3. Economizer includes harness extensional for older units
with no economizer hamess factory installed.
4. The "NC" economizer models do not include actuator,
controller, sensors, or wiring harness.
00
00
00
00
00
00
00
00
00
00
00
00
00
00
Filters provided
Rainhood with SIDE VIEW
water entrainment Down Discharge
filter
VYtKI Y VY MILKLI I L UV KYUKX 1 PUN XNU I0 UtLI VtNCU UY VN 1 Kt tAP'KtbJ l.U1VUl I IU
Aluminum water
entrainment
filter
VNItNIJ WILL NV I tit UIJVLVJtU VK UJtU WI IKVU
VUN000I
MicroMetl Corporation... Indianapolis Indiana —1-800-662-4822, Sparks Nevada — 1-800-884-4662, Longview Texas — 1-903-248-4800
Notes:
1. 1.5" ADDED TO OLD CURB O.D
2. MATERIAL: 18 ga. GALVANIZED STEEL
3. GASKET PROVIDED WITH CURB
4. INSULATION: 1" 1 1/2 LB DENSITY
17 5/8'
L
33 13/16'
121/4' I.—
1 1/4'
INSULATED
COVER
46 1/16'
1 3/4'
—_a—
1
47 12'
S
r_TL
P
DOM 0 ARO TOLERENZED PER A. VIASKI.IM
Attn: Tag:
Approval:
EXISTING CURB LAYOUT
2 1/4'
19 1/2'
26 1/2'
46'
43 3/4'
19 1/2 —+I
r2 1
RETURN
SUPPLY
391/2'
CURB SHOWN IS CDI STANDARD CONFIGURATION CDI RESERVES THE RIGHT TO
CHANGE LAYOUT WITHOUT NOTIFICATION. IF CURB IS NEEDED IN A
DIFFERENT CONFIGURATION COI MUST BE NOTIFIED PRIOR TO PLACING AN ORDER.
REVISIONS
REV.
DESCRIPPON
DATE
APPROVED
6/23/2006
RETURN AIR
I�'
�.� SUPPLY AIR
cum NN.tLeaJ
151.35
moreenwood
DATE
OTE ANY
AND RETURN OPENING
VOTE ANY CN
MALL WTI ANY
QUESTIONS
TAX BACK IF aA310
,4
016O
K ABR
Thursday, September 17, 8:17:17 AR{
17551 TYLER ST NW
CDI S6339RNEn,� s533B
1-4695 4021sma11
QUOTE #:
14695-4021sma11
.c"e. 1:15 1 enn 1 er 3
Project: Gateway Clearsign
Prepared By:
Performance Summary For Units 12 and 15
05/15/2017
07:56AM
Part Number:48VL-C240403
ARI SEER• 14.00
Base Unit Dimensions
Unit Length.
48.2 in
Unit Width: 32.6 in
Unit Height. 43.8 in
Total Operating Weight: 304 Ib
Unit
Unit Voltage -Phase -Hertz. 208-1-60
Air Discharge. Vertical
Fan Drive Type• Direct
Actual Airflow 830 CFM
Site Altitude. 0 ft
Cooling Performance
Condenser Entering Air DB. 95.0 F
Evaporator Entering Air DB• 80.0 F
Evaporator Entering Air WB: 67.0 F
Entering Air Enthalpy: 31.44 BTU/Ib
Evaporator Leaving Air DB: 60.4 F
Evaporator Leaving Air WB• 58.3 F
Evaporator Leaving Air Enthalpy 25.25 BTU/Ib
Net Cooling Capacity: 23.11 MBH
Net Sensible Capacity. 17.54 MBH
Total Unit Power Input. 2.01 kW
Coil Bypass Factor: 0.033
Heating Performance
Heating Airflow. 830 CFM
Entering Air Temp• 70.0 F
Leaving Air Temp• 106.8 F
Gas Heating Input Capacity 40.0 MBH
Gas Heating Output Capacity. 33.0 MBH
Temperature Rise: 36.8 F
AFUE (%)• 81.0
Supply Fan
Extemal Static Pressure. 0.60 in wg
Options / Accessories Static Pressure
Economizer' 0.08 in wg
Wet Coil. 0.04 in wg
Total Application Static (ESP + Unit Opts/Acc.)• 0.72 in wg
Fan RPM: 1050
Fan Power 0.39 BHP
Fan Motor Size, hp. 1/2
NOTE• High Motor Speed, Vert
Electrical Data
Minimum Voltage' 197
Maximum Voltage. 253
Compressor RLA• 8.7
Compressor LRA: 46
Outdoor Fan FLA (ea): 0.6
Indoor Fan Motor FLA• 3.8
Power Supply MCA• 15.2
Power Supply MOCP (Fuse or HACR): 20
Control Panel SCCR: 5kA RMS at Rated Symmetrical Voltage
Packaged Rooftop Builder 1.47 Page 4 of 6
Project: Gateway Clearsign
Prepared By:
Performance Summary For Units 12 and 15
05/15/2017
07:56AM
Acoustics
Sound Rating: 73.0 db
Sound Power Levels, db re 10E-12 Watts
Discharge Inlet Outdoor
63 Hz NA NA NA
125 Hz NA NA 54.3
250 Hz NA NA 61.3
500 Hz NA NA 55.2
1000 Hz NA NA 54.8
2000 Hz NA NA 57.1
4000 Hz NA NA 53.6
8000 Hz NA NA 43.1
Advanced Acoustics
Advanced Accoustics Parameters
1. Unit height above ground* 30.0 ft
2. Horizontal distance from unit to receiver: 50.0 ft
3. Receiver height above ground* 5.7 ft
4. Height of obstruction. 0.0 ft
5. Horizontal distance from obstruction to receiver 0.0 ft
6. Horizontal distance from unit to obstruction. 0.0 ft
Detailed Acoustics Information
Octave Band Center Freq. Hz
63
125
250
500
1k
2k
4k
8k
Overall
A
0.0
54.3
61.3
55.2
54.8
57.1
53.6
43.1
64.8 Lw
B
-
26.2
38.2
52.7
52.0
54.8
58.3
54.6
42.0
62.1 LwA
C
0.0
21.9
28.9
22.8
22.4
24.7
21.2
10.7
32.4 Lp
D
-
26.2
5.8
20.3
19.6
22.4
25.9
22.2
9.6
29.7 LpA
Legend
A Sound Power Levels at Unit's Acoustic Center, Lw
B A -Weighted Sound Power Levels at Unit's Acoustic Center, LwA
C Sound Pressure Levels at Specific Distance from Unit, Lp
D A -Weighted Sound Pressure Levels at Specific Distance from Unit, LpA
Calculation methods used in this program are pattemed after the ASHRAE Guide; other ASHRAE Publications and the AHRI
Acoustical Standards. While a very significant effort has been made to insure the technical accuracy of this program, it is assumed
Packaged Rooftop Builder 1.47 Page 5 of 6
Project: Gateway Clearsign
Prepared By:
Performance Summary For Units 12 and 15
05/15/2017
07:56AM
that the user is knowledgeable in the art of system sound estimation and is aware of the tolerances involved in real world acoustical
estimation. This program makes certain assumptions as to the dominant sound sources and sound paths which may not always be
appropriate to the real system being estimated. Because of this, no assurances can be offered that this software will always generate
an accurate sound prediction from user supplied input data. If in doubt about the estimation of expected sound levels in a space, an
Acoustical Engineer or a person with sound prediction expertise should be consulted.
Packaged Rooftop Builder 1.47 Page 6 of 6
48VL—C
Comfort" 14 SEER Single—Packaged Air
Conditioner and Gas Furnace System with Puron®
(R -410A) Refrigerant
Single Phase 2-5 Nominal Tons (Sizes 24-60)
Three Phase 3-5 Nominal Tons (Sizes 36-60)
Carrier
turn to the experts
Product Data
A09034
Fig. 1 - Unit 48VL-C
Single -Packaged Products with Energy -Saving Features and
Puron OO refrigerant.
• 14.0 SEER
• 11.5 EER
• 81.0% AFUE (Single phase models)
• ECM Motor -Standard
• Direct Spark Ignition
• Low Sound Levels
• Dehumidification Feature
• Certified to leak 2% or less of nominal air conditioning CFM deliv-
ered when pressurized to 1 -in. W.C. with all present air inlets, air out-
lets, and condensate drain port(s) sealed.
FEATURES/BENEFITS
One-piece heating and cooling units with low sound levels, easy
installation, lowmaintenance, and dependable performance.
Puron is Carrier's unique refrigerant designed to help protect the
environment. Puron is an HFC refrigerant which does not contain
chlorine that can harm the ozone layer. The most important
advantage of Puron refrigerant is that it has not been banned in
future air conditioning systems as the traditional refrigerant R-22
has been. Puron refrigerant is in service in millions of systems
proving highly reliable, environmentally sound performance.
Easy Installation
Factory -assembled package is a compact, fully self-contained,
combination gas heating/electric cooling unit that is prewired,
pre -piped, and pre -charged for minimum installation expense.
These units are available in a variety of standard and optional
heating/ cooling size combinations with voltage options to meet
residential and light commercial requirements. Units are
lightweight and install easily on a rooftop or at ground level. The
high tech composite base eliminates rust problems associated with
ground level applications.
Innovative Unit Base Design
On the inside a high-tech composite material will not rust and
incorporates a sloped drain pan which improves drainage and helps
inhibit mold, algae and bacterial growth. On the outside metal base
rails provide added stability as well as easier handling and rigging.
Convertible duct configuration
Unit is designed for use in either downflow or horizontal
applications. Each unit is converted from horizontal to downflow
and includes two horizontal duct covers. Downflow operation is
provided in the field to allow vertical ductwork connections. The
basepan seals on the bottom openings to ensure a positive seal in
the vertical airflow mode.
Efficient operation High -efficiency design offers SEER
(Seasonal Energy Efficiency Ratios) of 14.0, 11.5 EER, and
AFUE (Annual Fuel Utilization Efficiency) ratings up to 81.0%.
Energy-saving, direct spark ignition saves gas by operating only
when the room thermostat calls for heating. Standard units are
furnished with natural gas controls. A low-cost field installed kit
for propane conversion is available for all units.
Low NOx units are designed for California installations. These
models meet the California maximum oxides of nitrogen (NOx)
emissions requirement of 40 nanograms/joule or less as shipped
from the factory and MUST be installed in California Air Quality
Management Districts and wherever a Low NOx rule exists.
Durable, dependable components
Monoport inshot burners produce precise air -to -gas mixture,
which provides for clean and efficient combustion. The large
monoport on the inshot (or injection type) burners seldom, if ever,
requires cleaning. All gas furnace components are accessible in one
compartment.
Turbo -tubular' heat exchangers are constructed of aluminized
steel for corrosion resistance and optimum heat transfer for
improved efficiency. The tubular design permits hot gases to make
multiple passes across the path of the supply air.
In addition, dimples located on the heat exchanger walls force the
hot gases to stay in close contact with the walls, improving heat
transfer.
ECM Motor is standard on all models.
Direct -drive PSC (Permanent Split Capacitor) condenser -fan
motors are designed to help reduce energy consumption and
provide for cooing operation down to 40°F (4.4°C) outdoor
temperature. Motormaster® II low ambient kit is available as a
field -installed accessory.
1
Thermostat controls
Time Guard® II anti -short cycle protection circuitry. If a
non -corporate thermostat without anti -short cycle protection is
used the Time Guard II field -installed anti -short cycle kit is
recommended.
Refrigerant system is designed to provide dependability. Liquid
filter driers are used to promote clean, unrestricted operation. Each
unit leaves the factory with a full refrigerant charge. Refrigerant
service connections make checking operating pressures easier.
High Pressure Switch provides added reliability for the
compressor.
Indoor and Outdoor coils are computer -designed for optimum
heat transfer and efficiency. The indoor coil is fabricated from
copper tube and aluminum fins and is located inside the unit for
protection against damage. The outdoor coil is internally mounted
on the top tier of the unit.
Low sound ratings ensure a quiet indoor and outdoor
environment with sound ratings as low as 73dBA.
Easy to service cabinets provide easy 3 -panel accessibility to
serviceable components during maintenance and installation. The
basepan with integrated drain pan provides easy ground level
installation with mounting pad. A nesting feature ensures a positive
basepan to roof curb seal when the unit is roof mounted. A
convenient 3/4 -in. (19.05 mm) wide perimeter flange makes frame
mounting on a rooftop easy.
Standard horizontal metal duct covers with insulation come
with the unit and cover the horizontal duct openings. These can be
left in place if the units are converted to downflow.
Integrated Gas Control (IGC) board provides safe and efficient
control of heating and simplifies trouble -shooting through its
built-in diagnostic function.
Cabinets are constructed of heavyduty, phosphated, zinc -coated
prepainted steel capable of withstanding 500 hours in salt spray.
Interior surfaces of the evaporator/heat exchanger compartment are
insulated with cleanable semi-rigid insulation board, which keeps
the conditioned air from being affected by the outdoor ambient
temperature and provides improved indoor air quality. (Conforms
to American Society of Heating, Refrigeration and Air
Conditioning Engineers 62.2.) The sloped drain pan minimizes
standing water in the drain. An external drain is provided.
TABLE OF CONTENTS
Features/Benefits 1
Model Number Nomenclature 3
AHRI Capacities 4
Physical Data
Options and Acce • =s 7
Base Unit Dimensions 9-10
Accessory Dimensions .... 11
Selection Procedure 12
Performance Data 13-20
Typical Piping and Wiring 46
Application Data 47
Electrical Data 48
Typical Wiring Schematics 49-54
Controls 55
Guide Specifications 56-57
2
Project: Gateway Clearsign
Prepared By:
13 - 5T GasEle-460v
05/15/2017
07:59AM
13 - 5T GasEle-460v
Tag Cover Sheet
Unit Report
Certified Drawing
Performance Report
Unit Feature Sheet
Packaged Rooftop Builder 1.47 Page 1 of 9
Project: Gateway Clearsign
Prepared By:
Unit Report For 13 - 5T GasEle-460v
05/15/2017
07:59AM
Unit Parameters
Unit Model: 48KCDA06A2A6-0A0A0
Unit Size• 06 (5 Tons)
Volts -Phase -Hertz• 460-3-60
Heating Type: Gas
Duct Cfg• Vertical Supply / Vertical Return
Low Heat
Single Stage Compressor Models
Lines and Filters
Retum Air Filter Type: Throwaway
Retum Air Filter Quantity 4
Return Air Filter Size• 16 x 16 x 2
Unit Configuration
Medium Static Option Belt Drive
AI/Cu - Al/Cu
Base Electromechanical Controls
Standard Packaging
Warranty Information
1 -Year parts(std.)
5 -Year compressor parts(std.)
10 -Year heat exchanger - Aluminized(std.)
No optional warranties were selected.
Dimensions (ft. in.) & Weight (Ib.) ***
Unit Length:._ 6' 2.375"
Unit Width: 3' 10.75"
Unit Height. 3' 5.375"
��• Total Operating Weight. 607 Ib
*** Weights and Dimensions are approximate. Weight does
not include unit packaging. Approximate dimensions are
provided primarily for shipping purposes. For exact
dimensions and weights, refer to appropriate product
data catalog.
NOTE: Please see Warranty Catalog 500-089 for explanation of policies and ordering methods.
Ordering Information
Part Number
Description
Quantity
48KCDA06A2A6-0A0A0
Rooftop Unit
1
Base Unit
Medium Static Option Belt Drive
None
Accessories
CRECOMZR067A01
Ultra LOW LEAK - Vertical EconoMi$er X with solid-state W7220
controller
1
Packaged Rooftop Builder 1.47
Page 2 of 9
Project: Gateway Clearsign
Prepared By:
Certified Drawing for 13 - 5T GasEle-460v
05/15/2017
07:59AM
NOTES:
[[ [ G�RNEEss
7. (11(13111(11 t"Il INE1FlS01N[NSI 80
I. s CENTER OF GRAVITY
3. op, DIRECTION Of AIR FLOW
SHIT
J
A I1 PNASE)
A 0 8HASE1
MRC 04
A 3/0
it
14 1/0
13771
14 1/8
30111
4081 85
33 810
34/13
11 1/0
30733
37 3/6
14121
4851 06
11 3/0
330511
11 310
13713
38 9/8
14323
4518
11181
LECIRMAL
DISCO8NEC1
LOCA11dl
14
111811
LEFT
18-101
1 1
14591
(4118 11111 12'1/1
(4111 13631 II121
l I I
333/8
18481
UNITED P.O. eaN61
1FCHAOLWIFS 0(c0
0A0.IT
1:11EtWOAnP1A a tiara
SEE /HRU 1811
BASE CHAR(
25
16361
25-5/6
16521
RETURN AIR
E AL1.
COWOEN5515
DRAIN OPENING
IN BA3(PAN
11
411,
(11311-3/5
1
SUPPLY
IA
0.1/8
32111 REIGN!
AIA
24 7/2 29'3/8
1612] I1 71 SUIRPPLY
Ji -3/E F— 3118
13011 13s1
18-1/2
11701
OPTIONAL _
r
.L
COWOENSfR�
^NOOOW BLOWA
30(95
---111
CONDUIT SIZE
..,.=.
0
OPTIONAL
FACTORY
fTA(OWD
INSDISCONNECT
T�
ASIALL[D
[OWYEOWLET
u•
p�
OWLET
249
4518
11181
LECIRMAL
DISCO8NEC1
LOCA11dl
14
111811
LEFT
18-101
1 1
14591
(4118 11111 12'1/1
(4111 13631 II121
l I I
333/8
18481
UNITED P.O. eaN61
1FCHAOLWIFS 0(c0
0A0.IT
1:11EtWOAnP1A a tiara
SEE /HRU 1811
BASE CHAR(
25
16361
25-5/6
16521
RETURN AIR
E AL1.
COWOEN5515
DRAIN OPENING
IN BA3(PAN
11
411,
(11311-3/5
1
SUPPLY
IA
0.1/8
32111 REIGN!
AIA
24 7/2 29'3/8
1612] I1 71 SUIRPPLY
Ji -3/E F— 3118
13011 13s1
18-1/2
11701
OPTIONAL _
10[CESS 01000 B07 NEL
PANEL
1
=
TIRE
^NOOOW BLOWA
30(95
CONDUIT SIZE
..,.=.
S12E5 /050.1
fTA(OWD
INSDISCONNECT
_ _
10. 102.21
-3400L(
r-1--
249
1/6. 122.21
,-Jee
3/4' 1001,0031
u
CIO
=. : 00
10031 la. 71.1
pA8DL f
8-3/6
30 1/6 1213]
11641
118881
FRONT
00801(0)08 SIZES
1 3/8. 1351 DIA FIELD POWER SUPPLY HOLE
2' 1501 DIA POWER SUPPL7 80010051
1 3/1. 1511 DIA GAUGE ACCESS PLUG
1/8' 1221 DIA 71EL0 CONTROL 810184 HWE
3/4'11 NPS CONDENSATE GRAIN
I/2'-11 NIS GAS 1083307IOW
3 1/2 ' 1641 DIA PORN SUPPLY NIKK4015
THRU.(HE-BA 0 CHAR
THESE HOLES REWIRED FOR USE
088(478AODIA0 , 0034 1
THREADED
TIRE
530'D ROLE
CONDUIT SIZE
OSE
S12E5 /050.1
1/2'
Act.
10. 102.21
A
I/O'
249
1/6. 122.21
Y
3/4' 1001,0031
POWER
1 I/O' 128.41
'
2••
10031 la. 71.1
OAS
1 3/16. 110.01
300 '(405.050-8530PAN• I4 TORY (83108,
02311865 (OW GALT 8,7, 5 AAE PROVIDED
SELECT EITHER 3/4. OR 1/2'
FOR 70TEA, DEPENDING ON 0(03 5IIE
10011 PR001DE3 3/4' FIT /HRO CURS
51406E 6 FITTING.
10-1/2
0651
1114
1321
1LTER
11-3/8
12891
5 (/8
11551
OUTSIDE
A
21-1/4-
(5391
24 1/8
14821 31 14
11931
SUIIIY
AIR 1,
HUM
RIGHT 538
BARCNESRIC
RELIEF
FLOW
3Kn
/ OF 2
09-16-14
406C 04-06 SINGLE ZONE ELECTRICAL
COOLING WITH GAS HEAT
486C000281
Packaged Rooftop Builder 1.47
Page 3of9
Project: Gateway Clearsign
Prepared By:
Certified Drawing for 13 - 5T GasEle-460v
05/15/2017
07:59AM
.ONIT
OTD. UNIT
0II2NT
C0RRE6
NE16R (41
COBRA
IE16NT 101
COINER
RIONT ICI
CORNER
3716112 101
..
xE lGxi
LDS.
R0.
00S.
N8.
LOS.
R0.
106.
N0.
LBS.
R0.
2
1
I
480C 04
400
222
120
34
111
50
125
50
135
61
33 3/4
19681
24 314
16281
18 7/8 14791
MRC OS
544
246
130
50
126
57
142
44
146
46
30 6/4
19331
24 314
16781
18 7/0 14791
MRC 04
507
670
141
41
158
10
ISO
71
142
84
3$ 1/0
19131
23 112
[5971
70 1/8 15111
• 700 WREN OPINEIT QR ACCES 020(6. 8(ON 7(6 TO TR iRODUC OA 8 CAATAI03.
CORNER A
TOP
FRONT
1=1
: 00
7(CNrol061E3 n°R.In .sir°
CARR I[R ru7r
EingpSYLIM
TASWWITT
CORNER 6
CORNER C
2 or 2
09-16-14
tumors
486C 04-06 SINGLE ZONE ELECTRICAL
COOLING WITH GAS HEAT
4800000281
Packaged Rooftop Builder 1.47
Page 4 of 9
SUBMITTAL
MicroMetl
FORM NO. 18388-2D 12/20/2017
Submitted To:
Company:
Job Name:
Part Number.
ECD-SRTI2TA-D2DH-0
FEATURES;
For single ort speed indoor fan units onlv. models as listed above
Other control options are available. Contact MMC.
External gear driven dampers, eliminate slippage and binding,
associated with standard linkage.
Designed specifically for down discharge applications.
Easy to Install. Easy to service.
Factory assembled rainhood, with aluminum water entrainment
filters, in the outside portion of the hood.
Uses filter access door shipped with HVAC unit.
Ninoed filter access door ootion is ordered separately
Part number " ECDSRT1TA-HDOOR " for Chassis 1 units.
Part number' ECD-SRT2TA-HDOOR' for Chassis 2 units.
Ralnhood Is sloped for water run-off.
All harnesses and plugs needed are Included.
Honeywell Jade W7220 economizer control system,
CertMed FDD Product California T10e 24, Pert 6 HJW10
California and
ASHRAE
Code Compliant
Direct coupled
actuator
Economizer 39 Ibs., Hood 19 lbs., Total 58 lbs. Honeywell Jade Logia
Field installed in control ---
compartment.
Mixed air sensor.
Field installed in mixed
air section.
PL6 Harness
lett&
External, geardriven
dampers
Packing tape.
To be removed prior to
Installation.
Outside air sensor
Economizers meet Title 24, 2013, Prescriptive Section 140.4(e)4(A, B, C, and H), D. E. Rand G when supplied with controls,
and ASHRAE Standard 90.1-2010, Table 6.43.4.4 requirements.
5 year parts and components warranty. Damper life cyde testing and leakage. Relief. Sensor setpolnt, reliability, calibration, and high limit.
Economizers meetTltle 24, 2013, Mandatory Section 120.2 Economizer fault and detection diagnostic requirements,
when supplied with controls..
16.9"
Stainless steel blade
side seal on return and
outside alt blades.
Side View
Series
HaayNaommlaai2 *nuts W
4Arable dry bib wed.
•D2EH
HorMymre ermariealy *anion*
-02701
Hamm/ mramipdriy tlr,Ery W
ar rened.grWrEl.arbeetuft&
Hamrmleaamtabi tlmgW
Mimed tlabro Ws.
THIS DOCUMENT IS THE PROPERTY OF MICROMETL CORPORATION AND IS DELIVERED UPON THE EXPRESS CONDITION THAT THE CONTENTS WILL NOT BE DISCLOSED OR USED WITHOUT MIROMETLB WRITTEN CONSENT
MicroMetl Corporation... Indianapolis Indiana —1-800-662-4822, Sparks Nevada —1-800-884-4662, Longview Texas —1-903-248-4800
Certified Drawing for 13 - 5T GasEle-460v
Project: Gateway Ciearsign 05/15/2017
Prepared By: O7:59AM
Packaged Rooftop Builder 1.47 Page 5 of 9
Service
z\
Clearance
t
110
¢5317
LOCATION
ONAENsroni
CONOMON
A
4843 (1219 mm)
• UNt nsoomect !amounted on panel
154n 057 mm)
• No disconnect, mmerdeKe outlet option
• Recommended smite dearance
1241(305 mm)
• MetYnvn clearance
e
4241(1057 mm)
•wrtace tenet servkcals groveled (e.g.. metal, masonry wag)
3541(514mm)
•Swfete Deland semi:a Is ekRNnMeon-onductive (e..gg wend, sl
SpecW
•CMtktor mares of Hoe products within 16 ft.ef unit freshen nda
C
3641014 men)
• Silo condensate drain b used
184n (457 mm)
• MSWnan Unnerve
0
4841(1219 mm)
• No tux docharge accessory Installed, surface is combustible material
4241 (1067 mm)
• Statue behind seeNcerI 5rourded (e.g..e1e3e6masonry wait another tM
354n (914 mm)
• Sorface Wind smkerb electr1 (ynencnductre(eg., woad, fiberglass)
Special•
ehmitfar adjacent wits or bidding Iresha4eh4
4da5es wed*. 10. ft.otttlt unit's
nue outlet
NATE: UNt not deStgded to ho a Overhead obStmd154111421135 Engrxenrg for guidance on any
app&attonplArrag axrteadobotnction or *Nita? *names.
Packaged Rooftop Builder 1.47 Page 5 of 9
Project: Gateway Clearsign
Prepared By:
Performance Summary For 13 - 5T GasEle-460v
05/15/2017
07:59AM
Part Number:48KCDA06A2A6-0A0A0
ARI SEER• 14.10
Base Unit Dimensions
Unit Length. 74.4 in
Unit Width* 46.8 in
Unit Height. 41.4 in
Operating Weight
Base Unit Weight. 597 Ib
Medium Static Option Belt Drive. 10 Ib
Total Operating Weight. 607 Ib
Unit
Unit Voltage -Phase -Hertz: 460-3-60
Air Discharge: Vertical
Fan Drive Type: Belt
Actual Airflow: 2000 CFM
Site Altitude. 0 ft
Cooling Performance
Condenser Entering Air DB• 95.0 F
Evaporator Entering Air DB• 80.0 F
Evaporator Entering Air WB• 67.0 F
Entering Air Enthalpy 31.44 BTU/Ib
Evaporator Leaving Air DB: 58.6 F
Evaporator Leaving Air WB• 57.3 F
Evaporator Leaving Air Enthalpy 24.57 BTU/Ib
Gross Cooling Capacity: 61.84 MBH
Gross Sensible Capacity. 46.23 MBH
Compressor Power Input: 5.19 kW
Coil Bypass Factor: 0.058
Heating Performance
Heating Airflow: 2000 CFM
Entering Air Temp• 70.0 F
Leaving Air Temp• 97.3 F
Gas Heating Input Capacity. 72.0 MBH
Gas Heating Output Capacity 0.0 / 59.0 MBH
Temperature Rise• 27.3 F
Thermal Efficiency (%)• 82.0
Supply Fan
Extemal Static Pressure. 0.60 in wg
Fan RPM. 1241
Fan Power: 1.20 BHP
NOTE- Selected IFM RPM Range: 1035 -1466
Electrical Data
Voltage Range: 414 - 506
Compressor #1 RLA: 7
Compressor #1 LRA• 52
Outdoor Fan Motor Qty 1
Outdoor Fan FLA (ea)• 0.9
Indoor Fan Motor Type- MED
Indoor Fan Motor FLA• 4.2
Combustion Fan Motor FLA (ea)• 0.25
Power Supply MCA. 14
Power Supply MOCP (Fuse or HACR): 20
Packaged Rooftop Builder 1.47 Page 6 of 9
Project: Gateway Clearsign
Prepared By:
Performance Summary For 13 - 5T GasEIe-460v
05/15/2017
07:59AM
Disconnect Size FLA* 14
Disconnect Size LRA• 90
Electrical Convenience Outlet. None
Control Panel SCCR: 5kA RMS at Rated Symmetrical Voltage
Acoustics
Sound Power Levels, db re 10E-12 Watts
Discharge Inlet Outdoor
63 Hz 87.4 87.2 87.5
125 Hz 82.6 79.4 82.5
250 Hz 75.4 66.5 76.1
500 Hz 71.1 63.8 73.6
1000 Hz 67.7 63.1 71.3
2000 Hz 62.0 57.2 67.1
4000 Hz 63.8 53.1 64.1
8000 Hz 59.4 45.7 60.0
A -Weighted 74.6 69.1 77.0
Advanced Acoustics
Advanced Accoustics Parameters
1. Unit height above ground. 30.0 ft
2. Horizontal distance from unit to receiver 50.0 ft
3. Receiver height above ground. 5.7 ft
4. Height of obstruction. 0.0 ft
5. Horizontal distance from obstruction to receiver 0.0 ft
6. Horizontal distance from unit to obstruction: 0.0 ft
Detailed Acoustics Information
Octave Band Center Freq. Hz
63
125
250
500
1k
2k
4k
8k
Overall
A
87.5
82.5
76.1
73.6
71.3
67.1
64.1
60.0
89.2 Lw
B
61.3
66.4
67.5
70.4
71.3
68.3
65.1
58.9
76.7 LwA
C
55.1
50.1
43.7
41.2
38.9
34.7
31.7
27.6
56.8 Lp
D
28.9
34.0
35.1
38.0
38.9
35.9
32.7
26.5
44.3 LpA
Legend
A Sound Power Levels at Units Acoustic Center, Lw
B A -Weighted Sound Power Levels at Unit's Acoustic Center, LwA
C Sound Pressure Levels at Specific Distance from Unit, Lp
D A -Weighted Sound Pressure Levels at Specific Distance from Unit, LpA
Packaged Rooftop Builder 1.47 Page 7 of 9
Project: Gateway Clearsign
Prepared By:
Performance Summary For 13 - 5T GasEle-460v
05/15/2017
07:59AM
Calculation methods used in this program are pattemed after the ASHRAE Guide; other ASHRAE Publications and the AHRI
Acoustical Standards. While a very significant effort has been made to insure the technical accuracy of this program, it is assumed
that the user is knowledgeable in the art of system sound estimation and is aware of the tolerances involved in real world acoustical
estimation. This program makes certain assumptions as to the dominant sound sources and sound paths which may not always be
appropriate to the real system being estimated. Because of this, no assurances can be offered that this software will always generate
an accurate sound prediction from user supplied input data. If in doubt about the estimation of expected sound levels in a space, an
Acoustical. Engineer or a person with sound prediction expertise should be consulted.
20
18
16
D4
02
m
m 03 06 CO 12 15 18 21 24 27
Airf ow(CFM-thousands)
RPM=1241 BHP=1.20MaximtmiRPM=2100MaximumBHP=2.90
Note: Pleasecontactapplicationengineetingforselectionsoutsidetheshadedregion.
SC-SystemCurve RP-RatedPoint
FanCurve
39
Packaged Rooftop Builder 1.47 Page 8 of 9
\
\
\1933Fncl
\ lav\
N\N\
\\\
„ooRRM
\
\
\\
\ \
\
\
\
\
5:0061-P
\
soots
\
\
\
\
'
\
inn
,
\
iimamtiiiirc,
\ ..o.
.pORPM
v
\
0.756HP
1.00BFP
LSOBHP `
\
\
Alli
c 5081-P
—I_ \
1. \
\_I._
\
\I I
I
39
Packaged Rooftop Builder 1.47 Page 8 of 9
Project: Gateway Clearsign
Prepared By:
Unit Feature Sheet for 13 - 5T GasEle-460v
05/15/2017
07:59AM
WeatherMaker* — 48KC
PACKAGED ROOFTOP GAS 'HEATING/ELECTRIC COOLING UNITS —14 SEER
3, 4, 5 TONS
[ASNRA.
COMPLIANT
FWIEATHERMAKER SERIES
WeatherMaker 46KC (14 -SEER) units are one-piece gas
hea5ng. electric cooling units that ate pre -wired and charged
with Aron (R -4i0) refrigerant. They are factory tested in both
heating end cooling modes, and rated in accordance with AHRI
Standards 21W240. Weatherbtaker units are designed In
accordance with UL Standard 1995. and listed by the
Underwriters' Laboratories:
Approved and certified by:
US
AVM CERiIRLD.
Certified to ISO 9001
STANDARD FEATURES INCLUDE:
• Puron (R -410A) FIFO rafflgeraet
• Meets end exceeds ASI4RAE90.1energy efbineybomb
• Scroll compressors pith Internal ire break and overload proiedion
• Single -stage cooing cspsofty control
• SEER's up to 14.0. EER'suoto'12.0
• ecutrol"-` re`laerentmeterTrsosystem
• Esolusive noncom'siveconposkecoridensetepanina000rdenc, nItt
ASHRAE Standard e2, sbp"erg design, slide or
• Standard cooling opera tion upso 115•F (46°C) end damn to4g•F(4°C)
- down to 25° F (-4° C) naffs anther start k t.
• Prep skied eider'wap.oriels end orirre coa'.edirrteriorpaneStestedto
500 hours sal spray protection
• curvy trmisted cabinet
• Exrluslve IGCsold-statecanto, for ombeerddeign osticsebbL'ED
error code designstion bumercorrtml logic and energy ssriisg indoor
tnmotor deoy
• Low'NDx models met meet Cs ornie Air QueT'y Management
• Induced droll pesheat combustion dee rr
• Redundant psentwsWith uotel tiro sieges ofbelting
• Lowpressure and high pressure watch protected.
MAINTENANCE FEATURES:
• Accesspenelsrrih easygip handles
• Innovative arty no4Ific SOMAS dntint ante ssoartah
• Two-1nd, disposable return etftere end Toolaim filter soots' doer
• [IirectDike— ECMiidoor+rxrterisstandards ioptionelbeadrive
systems
• uemwsstboedfsodatingstool? safety ciwataubleshoosrgand
sir iiFiedconaoiboxarrangement
• EnArsivelGC soPd.statedontroffor dnaroa dieg no stiss net LED
error code des!pnrs&an, bumercontrol logic and energy saving indoor
fan motor delay.
INSTALLATION FEATURES
• Iltru4hebott0rrponerenlycepibIlity •
• Shoat point gess mtelectdeconnections
• Ful perimeter base ra11aahbut-in rigging adapts is end fork -slots
• Feld converble from vert ltohorizontalairlbw
STANDARD WARRANTY:
• 10yrearheiteschanger-1Syeerstatnlessserildattar,
• 5.yeercompressor
• 1-ye:upe,ts
• iL'Erry optional upgrades also ays'table
OPTIONS INCLUDE BUT ARE NOT LIMITED TO:
• PaemerUnkend RTU Oven stotiProtocolD0CCbnt Ila
• Si,pplyand Retort A4 Senate Detectors, Mat static motors
• Lowered condenser oak gwilds
• IDisconnecta•Kotr and come:erroe outletocturs
• StainlesStee'I;heatexdhangeropiron
• Corrosionrest ltao l coetiao.
di Hotstalk motor options
• Patented FWmid}f Zir' adaptkred et torddelnaton system. This option
e6a indudes I.btomnster I controls
• Winged accespanels
• Mtey rated econcim¢ersystem.Standard end i ra:LowLeak version s
Fora complete:al of option send ecnessostes-reterto the Product Data
Catalog ferthts Unit,
Packaged Rooftop Builder 1.47 Page 9 of 9
FIL
REVIEWED FOR
CODE COMPLIANCE
APPROVED
JUL 17 2017
City of Tukwila
BUILDING DIVISION
STRUCTURAL
CALCULATIONS
Clear Sign - RTUs
12870 Interurban Avenue South
Tukwila, Washington
MAY 25, 2017
PREPARED FOR:
Seattle Mechanical
899 West Main Street
Auburn, Washington 98001
PREPARED BY:
Moore Engineering Group
21902 96th Avenue SE
Snohomish, Washington
Moore
+its a�ia��c Engineering
Group
RECEIVED
CITY OF TUKWILA
JUN 21 2017
PERMIT CENTER
14110V
GENERAL STRUCTURAL NOTES:
1. ALL MATERIALS. WORKMANSHIP, DESIGN, AND CONSTRUCTION SHALL CONFORM TO
THESE NOTES AND THE INTERNATIONAL BUILDING CODE (IBC), 2012 EDITION.
2. DESIGN LOADING CRITERIA:
ROOF LIVE LOAD 25 PSF
MECHANICAL UNITS RTU #I 1 — 610 POUNDS
RTU #12 — 576 POUNDS
RTU #13 — 722 POUNDS
RTU #15 — 576 POUNDS
EARTHQUAKE SDS = 0.947
SITE CLASS D to E
WIND 85 MPH, EXPOSURE B
3. STRUCTURAL CALCULATIONS AND SKETCHES SHALL BE USED IN CONJUNCTION
WITH MECHANICAL DRAWINGS FOR BEDDING AND CONSTRUCTION. CONTRACTOR
SHALL VERIFY DIMENSIONS AND CONDITIONS FOR COMPATIBILITY AND SHALL
NOTIFY ENGINEER OF ALL DISCREPANCIES PRIOR TO CONSTRUCTION.
4. CONTRACTOR SHALL VERIFY ALL EXISTING DIMENSIONS. MEMBER SIZES AND
CONDITIONS PRIOR TO COMMENCING ANY WORK. ALL DIMENSIONS OF EXISTING
CONSTRUCTION SHOWN ARE INTENDED AS GUIDELINNES ONLY AND MUST BE
VERIFIED. THE EXISTING CONDITIONS SHOWN ON THE SKETCHES ARE BASED
EITHER ON SITE OBSERVATION, ORIGINAL DRAWINGS OR WERE ASSUMED BASED ON
EXPECTED CONDITIONS. IF THE EXISTING CONDITIONS DO NOT CLOSELY MATCH
THE CONDITIONS SHOWN ON THE SKETCHES, OR IF THE EXISTING MATERIALS ARE
OF QUESTIONABLE OR SUBSTANDARD QUALITY, NOTIFY THE ENGINEER PRIOR TO
COMMENCING ANY WORK.
5. CONTRACTOR SHALL PROVIDE TEMPORARY BRACING FOR THE STRUCTURE AND
STRUCTURAL COMPONENTS UNTIL ALL FINAL CONNECTIONS HAVE BEEN
COMPLETED IN ACCORDANCE WITH THE DRAWINGS.
6. CONTRACTOR SHALL BE RESPONSIBLE FOR ALL SAFETY PRECAUTIONS AND THE
METHODS, TECHNIQUES, SEQUENCES OR PROCEDURES REQUIRED FOR THE
COMPLETION OF THE WORK.
7. SHEET METAL SCREWS SHALL CONFORM TO THE AMERICAN IRON AND STEEL
INSTITUTE (AISI) "SPECIFICATIONS FOR THE DESIGN OF COLD -FORMED STEEL
STRUCTURAL MEMBERS".
8. CONNECT RTU #11, RTU 1412, AND RTU #15 TO THE METAL CURB ADAPTER AND THE
METAL CURB ADAPTER TO THE EXISTING METAL CURB WITH A MINIMUM OF (4) #12
SHEET. METAL SCREWS ON EACH SIDE OF THE UNIT. PLACE ONE SCREW AT 4" FROM
EACH CORNER OF THE UNIT AND THE REMAINING SCREWS EQUIDISTANT BETWEEN
THE CORNERS.
9. CONNECT RTU #13 TO THE EXISTING METAL CURB WITH A MINIMUM OF (3) #12 SHEET
METAL SCREWS ON EACH SIDE OF THE UNIT. PLACE ONE SCREW AT 4" FROM EACH
CORNER OF THE UNIT AND THE REMAINING SCREW AT APPROXIMATELY THE
MIDDLE OF THE UNIT.
PROJECT DESCRIPTION: The project consists of the replacement of four existing rooftop
mechanical units.
LOADS: LIVE 25 PSF
DEAD
Roofing and re -roof 5.0
1/2 Plywood sheathing 1.5
2x6 @ 24" o.c. 1.1.
4x14 @ 8' o.c. 1.5
Insulation 1.0
MEP 2.0
Ceiling & Lights 2.0
Total Dead 14.1
DEAD+ LIVE
WIND 110 mph, Exposure B
SEISMIC
EQUIPMENT
39.1 PSF
Latitude 47.487
Longitude -122.275
Site CIass D to E WA DNR
SDs (D) = 0.997
Srs (E) = 0.897
SDs = 0.947
Existing RTU -11 New RTU -11.
Unit 470 338
Existing Curb 115 115
Curb Adapter 157
Total 585 pounds 610 pounds
Dimensions 48"x33"x76" high
Moore
Engineering
Group
PROJECT:
CLEAR SIGN RTUS
ENGR: KWM
DATE: 5/26/ 17
SCALE:
SHEET
EQUIP. (cont)
Existing RTU -12 New RTU -12
Unit 454 304
Existing Curb 115 115
Curb Adapter 157
Total 569 pounds 576 pounds
Dimensions 48"x33"x76" high
Existing RTU -13 New RTU -13
Unit 594 . 607
Existing Curb 115 115
Total 709 pounds 722 pounds
Dimensions 74"x47"x53" high
Existing RTU -15 New RTU -15
Unit 450 304
Existing Curb 115 115
Curb Adapter 157
Total 565 pounds 576 pounds
Dimensions 48"x33"x76" high
Moore
Engineering.
Group
PROJECT:
CLEAR SIGN RTUs
ENGR: KWM
DATE: 5/26/ 17
SCALE:
SHEET
5!30/2017
Design Maps Summary Report
PALMS Design Maps Summary Report
User -Specified Input
Report Title Clear Sign RTUs
Tuc May 30, 2017 15:56:56 UTC
Building Code Reference Document 2012/2015 International Building Code
(which utilizes USGS hazard data available in 2008)
Site Coordinates 47.487°N, 122.275°W
Site Soil Classification
Risk Category
os '4v4L e. ,r,'' ' .,"•••
Y•: t �4v
Site Class E - "Soft Clay Soil"
I/II/III
•
f f
Ni I..,1.� •, y� t ; t ar/ `v"'' ".J
PE�t]r�or�m�
iRE' i'1
Burien
{ t
"_ • wt ` r TArolitApa
,' �p;ys�T-. • rte.
r.
iV.•'� 7 DesMvine.
USGS-Provided Output
Ss= 1.4958
S1 = 0.560 g
SMS = 1.346 g
SMt = 1.345 g
•
ent 4 s e
T..71
NIF.WVigi14.:#'ry•
Maple/alley.
S0 . = 0.897 g
SD1 = 0.897 g
For information on how the SS and S1 values above have been calculated from probabilistic (risk -targeted) and
deterministic ground motions in the direction of maximum horizontal response, please return to the application and
select the "2009 NEHRP" building code reference document.
•
4f�=a ?cs:i:xts_ S e..' o`r! cs✓ 't ^test xr;r °i _ _ . u'n
ri
Although this information is a product of the U.S. Geological Survey, we provide no warranty, expressed or implied, as to Che
Accuracy of the rata ronralned therein. This tool is not a substitute for technical subject -mutt=er knowledge.
https•J/earthquake.usgs.gov/cn2/designmaps/us/summary.php?template=minimal&Iatitude=47.487&longitude=-122.275&siteclass=4&riskcategory=0&edition=i b... 1/1
5/30/2017
Design Maps Summary Report
uS Design Maps Summary Report
User -Specified Input
Report Title Clear Sign RTUs
Tue May 10, 7017 15:56:37 UTC
Building Code Reference Document 2012/2015 International Building Code
(which utilizes USGS hazard data available :n 2008)
Site Coordinates
Site Soil Classification
47.487°N, 122.275°W
Site Class D - "Stiff Soil"
Risk Category I/I1/III
OR {;ijsX t i;0+r4"
RE -4-
• '45L
4
•
r .• , ...;••
aOECr4G3
FL0lcl'G I
01/411.',,,,:--1.
RENTON
MUNI r
/Reser
•
•
lr C - ••
t%7• n r ''�ash'Gr:
1 BurtE •
si-Ar c ,,t
t i. 4001,$4 eit L ":'c
ice` - .
F
t staquah
enton .'
USGS-Provided Output
Ss = 1.495 g
Si = 0.560 g
SMs = 1.495 g
5M1 = 0.841 g
HI
- Nape Valley r
•
LA'
Sos = 0.997 g
SD1 = 0.560 g
For information on how the SS and S1 values above have been calculated from probabilistic (risk -targeted) and
deterministic ground motions in the direction of maximum horizontal response, please return to the application and
select the "2009 NEHRP" building code reference document.
r+.4CE P.cs:'tYlse Steer
l r•g8,'i '?C..:7cYISC Spec ''ri
Although this information is a product of the U.S. Geological Survey, we provide no warranty, expressed or implied, as to the
accuracy of rhe data contained therein. This tool is not a substitute for technical subject -matter knowledge.
httpsJ/earthquake.usgs.gov/cnalesignmaps/us/summary.php?template=minimal&latitude=47.487&longitude=-122275&siteclass=3&riskcategory=0&edition=ib... 1/1
&/;(0
.4
,,P P rC4-_-
r rprzA 1
(C_ ri.)7
C71_01,1,0 EVal
(-N.; - (06,c.
C`(-- Irv) '2'45 r• Y 444
i�` j
• 'sic ! I L__ 1?co
Moore
lEngineering
Group
PROJECT:
ENGR'
DATE: F/f-1 _ C
SCALE:
d
SHEET
0'11'
(4 1'7111 tkrIA_A-5
- 1l.. _
uNrr 5{YE 48 NLYO . I 1 -
NLT02a l NHT024 N1 T030 NIMTOao 1 NHT030 NLTtt38 I t1�tT038 ? NETO36 1 NHTif?8 NVTU3E
NCMfNAL ..... {'tori} :9+h _\'Z 2±h 3
OPERATING WEiGHT (8))d50 454) 460 470 476 d80 4-9-6490 d13o sap
COMPRESSOI J _' �g - —• • i f f S36
Ausnt_ay
RaCtprOCetirlg kerrttetfc 3500 Apm
1
N7" - -
R-22
REFAI1EPANT METEREflli CEFfICE + AccuRatere Piston
CORiAEN$fR Gt011 I ••
Rows 1 2
Rn�tn. sn 20
C�Nf3k�8EFI FAFI '
Nominal Airflow term)
NefhinstSps.d (Rpm)
Qusmlttyy...pismeler (ht.)
Motor Hp(single-plumy
(threo-phasa)
EVAROli4FOR CSIL"
Rows
Mitten,
E'1rAPORATOR PAN
Nominal CIm
Nominal Speedm
Diameter s Widthln.;
Motor Hp (singlStwee-phaae-phase)
FURNACE SEC715-N
Burner Orifice No.
(Qty..4rti ems)
IMtuural Gas
Burner Orifice No.
( ...drill size)
) 2 55
Pilaf flea Diameter
(fn.._drill sloe)
Natural Goa
Phar Orifice Diameter (1n.)
R
_ Propene Oats
ALTEFIS
Disposable 288
192
2 44
Cleanable
UNIT SiRE 48
i!o]i�fiJO.-2:J1�+'ACriv"jlonj"
FIG *Frain. (t6)
C;MMPREssO
Qusntty
t#EFTiKIERANf' - -
fteFptGERANT— ilETItSft OEVlCE
CO'NOE OWL
Rows
Ftnsftn.
CENSER i AM -
NonNnel Airflow (Om)
Nominal Motor Np sl(nple-phe*e)
merwpileme
TOR C+ "'
Pews
Rnsfn.
EvAP3 ittiA F1t11 -
Nominat Ctm
Nominal Speed
Diameter it h In.)
Motor Hp (single-phase)
(MrwmPhsse)
FURNACE SECTION
Sumer Orifice No.
Natured
edGas)
Burner
Orifice No.
-drM size)
Gas
Pilot se Dlsmet.r
pa ...diifl alas)
Natural ties
Pilot Orifice Diameter (In.)
Propene Gas
nerue4Affi frurens (sq In jt
ble
CClleean�ab e
2000
825
,20
800 1000
1100
244 344 244 344 444
255 355 255 355 455
018 77
.009
10x8
3
14
529
352
2500
1100
Y. f IAB
r 'h
1200
it) x10
f
241
3 44 i 4...44
3 55 ( 4..55
824
418
4 ..42
4-54
_i
2600"
3000tt
825-
110011
6 44
5 65
720
480
1200
6 44
6 55
-INLTQt2 (NM18421NET° ENKi342 fNVT042 P&804a ++NMTOalf tVtlT04a NYi1A48 Irsieeo t4&trosoJN#fi050'NVi080
4e6 -866' -'.500 s`so 658 "-'6`74 Seo -588 566 BOA aid _5 B16 8l6
Ra 1tpr0cating Hormetic. 3t6n) Rpm
344
3 55
r
251)0 3000
1400
4 44 4 .42
4 55 • 4 ..64
i
720
480
3
t4
5 44 1 6. 44
5 66 i 8.. 55
'Operefng chargee fitted on unit nameplate
tReduired ft&M-supplied 9Mer areae we based on to letgsr of the ARl-retard tAh
Conditioning 8 RsiilgeratIon miaow or the heating airflow et a
liter 01300 artntn far dt+spoanbta typo or 450 wept for hlgh-oopsatty type Air
pressure drop must not exceed0 08 in wg
4
ACCuftater' PJaton
3 44
3 65
1
2
20
1100
1 20
1600
1100
10 x 10
4 44
4 55
.019 .77
009
816
544
-Singto-oneso unfte
ttThree-ptwee unite
6 44
5.. 55
6 42
854
3500
3 44
3 56
4
14
2000
4.. 44 j 5 44
4 SS 1 566
960
640
3450
6 42
B 54
Physical data
BABE UNIT 46
-
L4E004
LID LJE000
LJul.JE4116
ldiDJLJE067
,. n a ra Oman
4
is
j OPE'7 7 r WEIGHT (Pb) 1
UW1Mnit
UM( Economizer
Root Curb
6554 94
116
574
115
4
118
615
640
116
,. ,T .. TYPE
Operating Ctarge (lb-)
ONetnklel -Diameter(n4
Motor Hp.«Rpm
1�O 55
3.13
1.26
3500
+b .850
1
6.6
41000
' 850
A
1
70
8.11
'�.ev
41.00
TA 650
70
8-0
3800
'A85850
Rows...FlnUAn•
Total Fere Area Mu ft)
1...17
7.78
En ,. .:. ...:
1...17
12.25
.:. •i m..
1„ 17
12 25
2.•.17
12.25
TypeSim
w
fieminD�rtClen
Norseioalrper Code ECr NaSonal
Eledd2400
Maximum Cerrdnueue Shp
NMotorn2.40
eisme
frongeltigtvLon
MMotor�Bearinp Type
aaaxlnnan tan Rpm
Rater Palley Pooh 111wneterAID
Fan Pulley Pitch Olemette Qn.)
BM - Type...La ngilt ((n,)
Pulley Ce+riwtins Dtalmnotpn.)
Speed Change's, Perfull Tum of
Idevabl• Pa/ Ata gt• Pulley ~mumFlange
from Closed Position
Factory 8et�Full Turn Open
Fry Speed -Setting ra)
Fan Shaft Distaste? at (rpm)
P
mPalley (in.)
'''
10x10
Direct
1200
14
38
4860 445
-
Balt
2100
-
_
_
r
-
_
1dDhxtO
1800
Yx
87
1080 70
-
Ball
2100
-
-
-
r
-
-
-
_,
a 10x 10
13611
2000
10
1.70
B ®111
sli
2100
2.6-3 5 8
6 4
147-11555
63
6
3
7
et
10x10
Sok
is
58
1 Ba 80
2100
24 8
45
147- 5.5
S
3
1230
A •r *
ROwe...Finatin.
Total Fees Area (eq fry
2..15
4.17
En ante! Copper Tubes, Aumttum Doubae-T Fln
2..15 3..15 4.,.15
5 5 5 5 5 6
FU•` w
Sumer Ortffes Dtametsr On. ...drill e1ae)t
Natural ors -a Std
Liquid Propane - Alt
Thermostat Haat Anticipator Batting (amps)
20488 v
y State) (%) CUM Input
Tem rt Blas Range
d Preeturs (in. nu)
Natural Oas - Bud
liquid Propene - AN
Maximum Static Pressure 41n. erg)
Reid Gas Cormactlon Slat (In.)
-7117.
119 33
089 43
1.0
748000
25.85
3.5
3.8
75
.6
113 .39
089...43
1 0
74.000Y80f5.000
25.55135.65
3 53.5
9.5
75
5
113 33
089. 49
1.0
74,00 15000
28.55/35.85
3.5
75
5
.113 33
089 43
7180.00 15.000
so
25-55/355.65
75
5
•IIT IT ala. On.)
2 ..
1..20
. .
x 24 x t
. RR!WAIR FL 3 ':
Ouantlty...�ee (M.}
2...1 ...' x 2 T a
26x2
LEGEND
Bhp - Brake Horsepower
'Used to deterrrrtna wire sidtv par NEC. 000 _
#T a 4488WEw 005007 (and
5, (units have 3)b mere 2lwmars
4
C1$- DATrbia
8
J
1
1
1
0
0
5
F
fa
vi
ro
C. uk a3 / hAPT'o 2
K$
0
§
J
VI2
0
t .
0.
0
, !
\ !i
®
TE•
Zidii
=acam
k $
^l
itT
7
)/l
/7P(.-
artP(= � - 7.71-D
17...z;
Yl
44
5 C
Moore
Engineering
Group
171
/ t^ PLA., C..
PROJECT: ...�'
�r
42-
C
2
I�G.r1.y�
ENGR: L\vyt/ rug 1�
DATE: r'L- 1
SCALE:
SHEET
i0.f
,y
14.541
14 1
Moore
Engineering
Group
PROJECT: .
r...ls
ENGR: \\JI4
DATE: 1-9 r:511.1.7
SCALE:
� i
SHEET
3/1/2018
City of Tukwila
Department of Community Development
DAWNA PETET
899 W MAIN ST
AUBURN, WA 98001
RE: Permit No. M17-0092
CLEAR SIGN
12870 INTERURBAN AVE S
Dear Permit Holder:
Allan Ekberg, Mayor
Jack Pace, Director
In reviewing our current records, the above noted permit has not received a final inspection by the City of Tukwila Building
Division. Per the International Building Code, International Mechanical Code, Uniform Plumbing Code and/or the National Electric
Code, every permit issued by the Building Division under the provisions of these codes shall expire by limitation and become null
and void if the building or work authorized by such permit has not begun within 180 days from the issuance date of such permit, or if
the building or work authorized by such permit is suspended or abandoned at any time after the work has begun for a period of 180
days. Your permit will expire on 4/10/2018.
Based on the above, you are hereby advised to:
1) Call the City of Tukwila Inspection Request Line at 206-438-9350 to schedule for the next or final inspection. Each
inspection creates a new 180 day period, provided the inspection shows progress.
-or-
2) Submit a written request for permit extension to the Permit Center at least seven(7) days before it is due to expire.
Address your extension request to the Building Official and state your reason(s) for the need to extend your permit.
The Building Code does allow the Building Official to approve one extension of up to 180 days. If it is determined that your
extension request is granted, you will be notified by mail.
In the event you do not call for an inspection and/or receive an extension prior to 4/10/2018, your permit will become null and void
and any further work on the project will require a new permit and associated fees.
Thank you for your cooperation in this matter.
Sincerely,
Bill Rambo
Permit Technician
File No: M17-0092
6300 Southcenter Boulevard Suite #100 • Tukwila, Washington 98188 • Phone 206-431-3670 • Fax 206-431-3665
PERMIT COORD COPY
PLAN REVIEW/ROUTING SLIP
PERMIT NUMBER: M17-0092 DATE: 06/26/17
PROJECT NAME: CLEAR SIGN
SITE ADDRESS: 12870 INTERURBAN AVE S
X Original Plan Submittal
Response to Correction Letter #
Revision # before Permit Issued
Deferred Submittal # after Permit Issued
DEPARTMENTS:
PG) A' NO c01 't
Building Division
Public Works ❑
AiA A)/1/4
Fire Prevention
Structural
-1-114-(7
Planning Division
❑ Permit Coordinator
PRELIMINARY REVIEW:
Not Applicable ❑
(no approval/review required)
REVIEWER'S INITIALS:
DATE: 06/27/17
Structural Review Required
DATE:
APPROVALS OR CORRECTIONS:
Approved
DUE DATE:
❑ Approved with Conditions
Corrections Required ❑ Denied
(corrections entered in Reviews) (ie: Zoning Issues)
07/25/17
Notation:
REVIEWER'S INITIALS:
DATE:
Permit Center Use Only
CORRECTION LETTER MAILED:
Departments issued corrections: Bldg ❑ Fire ❑ Ping ❑ PW 0 Staff Initials:
.12/18/2013
IECS INC
Home Espanol Contact
Search L&I
A -Z Index He1u
Page 1 of 3
My L&I
Safety & Health Claims & Insurance Workplace Rights Trades & Licensing
Washington State Department of
labor & Industries
IECS INC
Owner or tradesperson
Principals
HUMPHREY, GEORGE, PRESIDENT
Doing business as
IECS INC
WA UBI No.
601 639 846
PO Box 19252
SEATTLE, WA 98109-1252
206-939-9495
KING County
Business type
Corporation
License
Verify the contractor's active registration / license / certification (depending on trade) and any past violations.
Construction Contractor Active.
Meets current requirements.
License specialties
HeatingNent/Air-Conditioning and Refrig
(HVAC/R)
License no.
IECS***044QL
Effective — expiration
11/1311996-11/2012018
Bond
No bond accounts during the previous 6 year period.
Insurance
Nationwide Mutual Ins Co $1,000,000.00
Policy no.
ACPACT07515636456
Received by L&I Effective date
0712812016 08/01/2013
Expiration date
08/01/2017
Insurance history
Savings
(in lieu of bond) $6,000.00
Received by L&I Effective date
11/20/2001 11/20/2001
Release date impaired date
N/A N/A
Savings account ID
Savings history
Lawsuits against the bond or savings
No lawsuits against the bond or savings accounts during the previous 6 year period.
L&I Tax debts
No L&I tax debts are recorded for this contractor license during the previous 6 year period, but some debts
may be recorded by other agencies.
Help us improve
https://secure.lni.wa.gov/verify/Detail.aspx?UBI=601639846&LIC=IECS * * * 044QL&SAW= 7/19/2017