HomeMy WebLinkAboutPermit M17-0109 - RED WING SHOES - HEAT PUMP RTUThis record contains information which is exempt from public disclosure
pursuant to the Washington State Public Records Act, Chapter 42.56 RCW
as identified on the Digital Records Exemption Log shown below.
M17-0109
RED WING SHOES
17135 SOUTHCENTER PKWY
THE ABOVE MENTIONED
Page #
DIGITAL
Code
RECORDS
PERMIT FILE INCLUDES
Exemption
(DR) EXEMPTION LOG
THE FOLLOWING REDACTED INFORMATION
Brief Explanatory Description
StatutelRule
Personal Information —
The Privacy Act of 1974 evinces Congress'
intent that social security numbers are a private
concern. As such, individuals' social security
numbers are redacted to protect those
Social Security Numbers
individuals' privacy pursuant to 5 U.S.C. sec.
5 U.S.C. sec.
DR1
Generally — 5 U.S.C. sec.
552(a), and are also exempt from disclosure
552(a); RCW
552(a); RCW
under section 42.56.070(1) of the Washington
42.56.070(1)
42.56.070(1)
State Public Records Act, which exempts under
the PRA records or information exempt or
prohibited from disclosure under any other
statute.
Redactions contain Credit card numbers, debit
card numbers, electronic check numbers, credit
Personal Information —
expiration dates, or bank or other financial
RCW
55
DR2
Financial Information —
RCW 42.56.230(4 5)
account numbers, which are exempt from
disclosure pursuant to RCW 42.56.230(5),
except when disclosure is expressly required by
or governed by other law.
42.56.230(5)
Personal Information —
Driver's License. RCW
Redactions contain information used to prove
RCW
DR3
—
identity, age, residential address, social security
42.56.230 (7a
42.56.230
(7a & c)
number or other personal information required to
apply for a driver's license or identicard.
& c)
Redacted content contains a communication
between client and attorney for the purpose of
obtaining or providing legal advice exempt from
RCW
DR4
Attorney -Client Privilege —
RCW 5.60.060(2)(a); RCW
disclosure pursuant to RCW 5.60.060(2)(a),
which protects attorney-client privileged
5.60.060(2)(a);
RCW
42.56.070(1)
communications, and RCW 42.56.070(1), which
protects, under the PRA, information exempt or
prohibited from disclosure under another statute.
42.56.070(1)
RED WING SHOES
17135 SOUTHCENTER PKWY
EXPIRED 03/13/18
M17-0109
Parcel No:
Address:
City of Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206-431-3670
Inspection Request Line: 206-438-9350
Web site: http://www.TukwilaWA.gov
MECHANICAL PERMIT
2623049071 Permit Number: M17-0109
17135 SOUTHCENTER PKWY
Project Name: RED WING SHOES
Issue Date: 9/14/2017
Permit Expires On: 3/13/2018
Owner:
Name:
Address:
KTM GROUP LLC
2810 EASTLAKE AVE E , SEATTLE, WA,
98102
Contact Person:
Name: DAWNA PETET Phone: (253) 939-9495
Address: 899 W MAIN ST, AUBURN, WA, 98001
Contractor:
Name: IECS INC Phone: (206) 939-9495
Address: PO BOX 19252 , SEATTLE, WA, 98109-
1252
License No: IECS***044QL Expiration Date: 11/20/2018
Lender:
Name:
Address:
DESCRIPTION OF WORK:
REPLACE EXISTINGTRANE MODEL #YSC060A3EHAI GAS RTU WITH A NEW CARRIER MODEL #50KCQA06A HEAT
PUMP RTU
Valuation of Work: $16,535.00
Type of Work: REPLACEMENT
Fuel type: ELECT
Fees Collected: $424.04
Electrical Service Provided by: PUGEST SOUND ENERGY
Water District: TUKWILA
Sewer District: TUKWILA
Current Codes adopted by the City of Tukwila:
International Building Code Edition:
International Residential Code Edition:
International Mechanical Code Edition:
Uniform Plumbing Code Edition:
International Fuel Gas Code:
Permit Center Authorized"Signature:
2015
2015
2015
2015
2015
National Electrical Code:
WA Cities Electrical Code:
WAC 296-46B:
WA State Energy Code:
Date:
2014
2014
2014
2015
I hearby certify that I have read and examined this permit and know the same to be true and correct. All
provisions of law and ordinances governing this work will be complied with, whether specified herein or not.
The granting of this permit does not presume to give authority to violate or cancel the provisions of any other
state or local laws regulating construction or the performance of work. I am authorized to sign and obtain this
development •ermit and agree to the conditions attached to this permit.
Signatur
Print Name: - (DCl` Wiry(
Date: q_11-/-/7
This permit shall become null and void if the work is not commenced within 180 days for the date of issuance, or if
the work is suspended or abandoned for a period of 180 days from the last inspection.
PERMIT CONDITIONS:
1: Work shall be installed in accordance with the approved construction documents, and any changes made
during construction that are not in accordance with the approved construction documents shall be
resubmitted for approval.
2: All permits, inspection record card and approved construction documents shall be kept at the site of work
and shall be open to inspection by the Building Inspector until final inspection approval is granted.
3: All construction shall be done in conformance with the Washington State Building Code and the
Washington State Energy Code.
4: Remove all demolition rubble and loose miscellaneous material from lot or parcel of ground, properly cap
the sanitary sewer connections, and properly fill or otherwise protect all basements, cellars, septic tanks,
wells, and other excavations. Final inspection approval will be determined by the building inspector based
on satisfactory completion of this requirement.
5: All plumbing and gas piping work shall be inspected and approved under a separate permit issued by the
City of Tukwila Building Department (206-431-3670).
6: All electrical work shall be inspected and approved under a separate permit issued by the City of Tukwila
Permit Center.
7: VALIDITY OF PERMIT: The issuance or granting of a permit shall not be construed to be a permit for, or an
approval of, any violation of any of the provisions of the building code or of any other ordinances of the City
of Tukwila. Permits presuming to give authority to violate or cancel the provisions of the code or other
ordinances of the City of Tukwila shall not be valid. The issuance of a permit based on construction
documents and other data shall not prevent the Building Official from requiring the correction of errors in
the construction documents and other data.
8: ***MECHANICAL PERMIT CONDITIONS***
9: All mechanical work shall be inspected and approved under a separate permit issued by the City of Tukwila
Permit Center (206/431-3670).
10: Manufacturers installation instructions shall be available on the job site at the time of inspection.
PERMIT INSPECTIONS REQUIRED
Permit Inspection Line: (206) 438-9350
0703 MECH EQUIP EFF
1800 MECHANICAL FINAL
0609 PIPE/DUCT INSULATION
.0705 REFRIGERATION EQUIP
0701 ROUGH -IN MECHANICAL
0702 SMOKE DETECTOR TEST
CITY OF TUKWILA
Community Development Department
Permit Center
6300 Southcenter Blvd, Suite 100
Tukwila, WA 98188
http://www.TukwilaWA.gov
Mechanical Permit No.
Project No.
Date Application Accepted:
Date Application Expires:
- 010?
0-11- 17
(For office use only)
MECHANICAL PERMIT APPLICATION
Applications and plans must be complete in order to be accepted for plan review.
Applications will not be accepted through the mail or by fax.
**please print**
SITE LOCATION
-7 Sot King Co Assessor's Tax No.:
Site Address: 17 ( 3 5 (�-( Pkw
n r1
Tenant Name: gQ�X � l n , _S
PROPERTY OWNER
Name: kilr /mina p
Address: 9 s Ip gas*? 'Iv{ i -
City: eta State:'f 4 j/4 ZiP:6
73/0a
CONTACT PERSON — person receiving all project
communication
Name: no,r L T;I�-
Low �
Address: Sen 1,0 ` }ilsLivi s+__ ,
Zip:9
City: 1J114(i\._ State: Mx_aot) I
Phone: (g5. 'Q.3_9l : (253- 939,_ q24-0
Email:Ad Lti mit 1 5,ea44-tszoli cko hd nd 1
Suite Number:
New Tenant:
A 64610 7 /
Floor:
0 Yes 1FL.No
MECHANICAL CONTRACTOR INFORMATION
Company Name: /�,J ,���� /�%�/�
(5-M 'WI ale d I cd
Address: gqq too `, _f 'l r ` .
(y��
City: A. i b r(o State: f 3j Zip: gOCX)
Phone:a55'" l-�`7 '" 9 (ti ax:t2t3' q -- 9,26 0
l -�%
Contr Re o.: Exp Date: i i
hafts
Tukwila Business License No.:Auk509'A947 (
Valuation of project (contractor's bid price): $ / W) 51b5, 0 0 ' �1
Describe the scope.of work in detail: R-Q,��QCJZ_ e ii t i�'C�. - . V nbo J * y5 0..010 0 ' i + b i 1 G", R'T u
1.0{"d1'1t"l ac Ale V WL ea�rno c s.k 50 kc a l o (a 0 14 - wn RTS..
Use: Residential: New 0 Replacement 0
Commercial: New 0 Replacement
Fuel Type: Electric �Q Gas ❑
Other:
HAAppliatio=Worms-Applicata= On Late \2016 Applications\Mechanical Permit Application Revised 1-4-16.doex
Revised: January 2016
bh
Page 1 of 2
Indicate type of mechanical work being installed and the quantity below:
Unit Type
Qty
Fumace <100k btu
Residential, Nighttime
Furnace >100k btu
Industrial
Floor furnace
55 dB(A)
Suspended/wall/floor
mounted heater
57 dB(A)
Appliance vent
Commercial
Repair or addition to
heat/refrig/cooling
system
47 dB(A)
Air handling unit
65 dB(A)
<10,000 cfm
60 dB(A)
Unit Type
Qty
Air handling unit
Residential, Nighttime
>10,000 cfm
Industrial
Evaporator cooler
55 dB(A)
Ventilation fan
connected to single duct
57 dB(A)
Ventilation system
Commercial
Hood and duct
47 dB(A)
Incinerator — domestic
65 dB(A)
Incinerator —
comm/industrial
60 dB(A)
Unit Type
Qty
Fire damper
Residential, Nighttime
Diffuser
Industrial
Thermostat
55 dB(A)
Wood/gas stove
57 dB(A)
Emergency generator
Commercial
Other mechanical
equipment
47 dB(A)
N 0121-1- um,l,
65 dB(A)
Boiler/Compressor
Qty
0-3 hp/100,000 btu
3-15 hp/500,000 btu
15-30 hp/1,000,000 btu
30-50 hp/1,750,000 btu
50+ hp/1,750,000 btu
Noise:
Mechanical units need to be in compliance with the Tukwila Noise Code. Maximum permissible sound levels are based on from where the sound is
created and where the sound is heard. Additionally, if sound can be heard from within a house at night in a residential zone it may not be allowed.
For more details, see TMC 8.22
*Daytim
District of Sound
Producing Source
District of Receiving Property
Residential, Daytime*
Residential, Nighttime
Commercial
Industrial
Residential
55 dB(A)
45 dB(A)
57 dB(A)
60 dB(A)
Commercial
57 dB(A)
47 dB(A)
60 dB(A)
65 dB(A)
Industrial
60 dB(A)
50 dB(A)
65 dB(A)
70 dB(A)
A few sounds are exempt from the noise code, including:
• Warning devices;
• Construction and property maintenance during the daytime hours (lam -1 Opm);
• Testing of backup generators during the day.
PERMIT APPLICATION NOTES -
Value of construction — in all cases, a value of construction amount should be entered by the applicant. This figure will be reviewed and is subject
to possible revision by the permit center to comply with current fee schedules.
Expiration of plan review — applications for which no permit is issued within 180 days following the date of application shall expire by limitation.
The building official may grant one extension of time for additional periods not to exceed 90 days each. The extension shall be requested in writing
and justifiable cause demonstrated. Section 105.3.2 International Building Code (current edition).
I HEREBY CERTIFY THAT I HAVE READ AND EXAMINED THIS APPLICATION AND KNOW THE;SAME TO BE TRUE UNDER
PENALTY OF PERJURY BY THE LAWS OF THE STATE OF WASHINGTON, AND I AM AUTHORIZED TO APPLY FOR THIS PERMIT.
BUILD : G OWNER ORA ? O ' .ZED AG NT:
Signatur
Print Name:
Mailing Address:
QLon1
'� ► `¢ T ` -42- fA lQ , elephone:
gg9I Ire (s -.
/944tAlily
HAApplicationa\Forms-Applications On Line\2016 Applications\Mechanical Permit Application Revised 1-4-16.docx
Revised: January 2016
bh
Date: SID
State Zip
Page 2 of 2
Cash Register Receipt
City of Tukwila
DESCRIPTIONS ACCOUNT I QUANTITY
PermitTRAK
PAID
$424.04
M17-0109 Address: 17135 SOUTHCENTER PKWY Apn: 2623049071 $424.04
MECHANICAL $407.73
PERMIT ISSUANCE BASE FEE
R000.322.100.00.00
0.00
$33.15
PERMIT FEE
R000.322.100.00.00
0.00
$293.03
PLAN CHECK FEE
R000.322.102.00.00
0.00
$81.55
TECHNOLOGY FEE $16.31
TECHNOLOGY FEE
TOTAL FEES PAID BY RECEIPT: R12102
R000.322.900.04.00
0.00
$16.31
$424.04
Date Paid: Friday, August 11, 2017
Paid By: SEATTLE MECHANICAL INC
Pay Method: CHECK 12220
Printed: Friday, August 11, 2017 8:57 AM 1 of 1
CRIVSYSTEMS
REVISIONS
No changes shall be made to the scope
of work without prior approval of
Tukwila Building Division.
NOTE: Revisions will require a new plan submittal
and may include additional plan review fees. 1
FILE COPY
Permit No. Vt. L <7 i o
Plan review approval is subject to errors and omissions.
Approval of construction documents does not authorize
the violation of any adopted code or ordnance. Receipt
of approved Field Copy and conditions is acknow$edget
City of Tukwila
BUILDING DIVISION
SEPARATE PERMIT
REQUIRED FOR:
0 Mechanical
El/Electrical
Ltumbirg
-f4Gas Piping
City of Tukwila
BUILDING DIVISION
RV 1: 2O
REVIEWED FOR
CODE COMPLIANCE
APPROVED
AUG 3 0 201? {:
City of Tube
BUILDING
Scope of work
Replace existing Trane YSC060A3EHA1 Gas RTU with a new
Carrier 5OKCQA06A Heat Pump RTU.
EVIEWED *FOR
C DE COMPLIANCE
APPROVED
AUG 3 0 2017
City of Tukwil-
IL�ING D!' ON
.+� o
1.1
C 00
cn
o0 0
c
3 M 3
a et
eg
'ERM IT SEi'
•
Google Earth feet
meters
90
3C
RECEIVED
ITY OF TUKWILA
AUG 112017
PATECENTER
PATE ; 7/18/2017
Lu1 vvasnington state Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1
Mechanical Summary
2015 Washin.ton State Ene
Code Com
Project Information
lance Forms for Commercial Bulldin s includin• R2 & R3 over 3 stories and all R1
►i
MECH-SUM
Revised January 2017
Project Title: (VI 14(5/1 0 v V1L 6E Date
Applicant Information. Provide contact information for individual who can respond to
inquiries about compliance form information provided.
A2
Company Name: 5-r Y/J ��,�tcdc%L
Company Address: r q AAA.) c\ --r . /A, �vrn ,, k1 • 9
Applicant Name: f RJ �l.i`F
Applicant Phone: 253 q3 91- q —
For Building Dept. Use
riLE
Project Description
Briefly describe mechanical systems in
the text box provided
❑Total Bldg Performance (TBP)
This path includes all mandatory
provisions per C401.2 Option 2.
MECH-SUM, MECH-CHK, and C407
Energy Analysis forms required.
:New Building ❑Building Addition ❑Tenant Improvement ❑System Retrofit o System Changes
1 'LAC rui&- 51ro0 G A5 t''AC.k446e v 'Act ,,,_)ert-t
» IU Cor► R2 (e-12 0 igelcr ?utA-4 �.
Design Load Calculations
Mechanical Schedules
❑ Load calculation summary ❑ MECH-LOAD-CALC Form
Provide design load calculations for all mechanical systems and equipment serving the building heating, cooling or
ventilating needs. If a load calculation summary is provided with the permit documents that includes all applicable
compliance information then the MECH-LOAD-CALC for is not required.
Mechanical Plans)Yf 0 MECH-EQ Forms (TBD)
Indicate location of equipment compliance information. If provided on plans then MECH-EQ forms are not required,
however, include on plans all applicable compliance information listed in MECH-EQ tables.
Dedicated Outdoor Air
System Requirements and
High Efficiency VAV
Alternate
DOAS is required per C403.6 effective July 1, 2017 (office, retail, education, library and fire station occupancies)
All occupied, conditioned areas shall be served by a DOAS that delivers required ventilation air in a manner that does
not require space conditioning fan operation. Space conditioning fans cycled off when no heating or cooling is required.
❑ Ventilation provided via natural ventilation per 2015 IMC in lieu of DOAS (C403.6, Exception 1)
❑ Ventilation and space conditioning provided by a HEVAV system per C403.7 in lieu of DOAS (C403.6, Exception
2)
❑ DOAS included in project, although not required (occupancy not office, retail, education, library or fire station)
0 DOAS related allowances included in project:
O Prescriptive vertical fenestration maximum area allowance increased to 40% per C402.4.1.4 with 100% of
conditioned floor area in building served by DOAS.
❑ Exception to air economizer per C403.3 Exception 1, include MECH-ECONO form.
Fan Power
HVAC Hydronic Systems
fid Project includes HVAC air distribution systems that provide heating and/or cooling
If yes, provide a MECH-FANSYS -SUM for.
O For one or more systems, the total fan motor nameplate hp of all fans in HVAC system exceeds 5hp.
If yes, provide a seperate MECH-FANSYS form for each HVAC system exceeding the 5 horsepower threshold.
Refer to Section C403.2.11 and MECH-FANSYS-DOC for requirements ano exceptions.
❑ Hydronic chilled water
❑ Hydronic heating water
❑ Water -loop heat pump
❑ Geothermal
'J No hydronic systems
C406 Additional Efficiency
0 HonsMe an:gal
REVIEWED FOR
:ODE COMPLIANCE
APPROVED
❑ C406.2 More efficient HVAC equipment and fan systems
Requires 90% of heating and cooling capacity to be equipment listed in tables C403.2.3(1)-(9) or air -to -water heat
pumps and heat recovery chillers. All equipment listed in tables C403.2.3(1)-(7) must be 15% more efficient than
minimum requirements. All stand alone supply, return, and exhaust fans overlhp must have FEQ 2 71 and must be
selected within 10% of maximum total or static pressure.
❑ C406.6 Dedicated outdoor air system (DOAS)
Requires 90% of conditioned floor area to be served by a DOAS per 0403.6 that delivers required ventilation air in a
manner that does not require space conditioning fan operation.
❑ C406.7 Reduced energy in service water heating
Requires 90% of floor area be in occupancy types listed in C406.7.1 and that 60% of annual hot water energy use be
provided by heat pump, waste heat recovery or solar water -heating systems.
AUG 302017
' City of Tukwila t/i( T.
0 I 0 7
BUIL'DING DIVISION
RECEIVED
CITY OF TUKWILA
AUG 11 2017
PERMIT CENTER
2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1
7 ec
anica ummary, pg. 2 MECH-SUM
State Energy Code Compliance Forms for Commercial Buildings including R2 & R3 over 3 stories and all R1 Revised
2015 Washington
January 2017
Service Water Heating
Systems
N(A'
I
Equipment Type (s)
❑ Instantaneous
g No service water systems
from space heat boiler or
• Hot water heating tank(s)
❑ Dedicated boiler
Distribution Type (s)
❑ Circulation System
• Heat exchange
central hot water/steam
• On -demand
Commissioning
Commissioning is required
for:
per C408.2
shall be performed
requirements:
of all mechanical
heating. Mechanical
water heating
not required.
water heating systems per C408.4
systems regardless of individual equipment capacity.
systems in the building do not exceed 240,000 Btu/h
commissioning not required.
does not exceed 200,000 Btu/h. Service water heating
• Mechanical systems
• Service
!f required, commissioning
Exceptions to commissioning
Tr -'0. Total output capacity
cooling or 300,000 Btu/h
for all applicable
space conditioning
systems
system in building
• Capacity of largest service
systems commissioning
Low Energy and Semi -Heated Spaces (Note 6 and 7)
Space
Type
•
Location iri Plan(s)
- Space(s) Served'
Area Served,
square feet
Heating
Capacity;-Btu/h
(Note 4)
Cooling
Capacity, Btu/h
(Note 5)
Peak Space
Conditioning
Capacity,
Btu/h-sf
Compliance
Check
Notes
iii
Note 4 - Provide total installed heating output capacity of systems serving Low Energy or Semi -Heated space(s) in btuh.
Note 5 - Provide total installed cooling capacity of system serving Low Energy space(s) in Btu/h. Not allowed for semi -heated spaces. En er 0 if no cooling.
Note 6 - Refer to Section C402.1.1 Low Energy Building. 'Walled peak space conditioning capacity, heating or cooling, may not exceed 3.4 Btu/lest
Note 7 - Refer to Section C402.1.1.1 and Semi -Heated Space definition in Chapter 2. Total heating output capacity may not exceed 8 Btu/h*sf. Only systems without
electric resistance heating and no cooling are eligible for the wall insulation exception under semi -heated.
2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1 - Page 1 of 7
Mechanical Permit Plans Checklist
2015 Washington State Energy Code Compliance Forms for
MECH-CHK
Project Title: Fill this line out on MECH-SUM
rcewseu January zui r
Date 1 /1/2015
The following information is necessary to check a permit application for compliance with the mechanical systems and equipment requirements of the
Washington State Energy Code, Commercial Provisions.
Applicable
(yes,no,na)
Code Section
Code Provision
Information Required -Must be in permit documents
Location in
Documents
Building Department
Notes
Equipment - Sizing, Performance and Type
C403.1
Exempt process equipment
Identify equipment to be used in manufacturing, industrial or commercial processes that do not
provide space conditioning; identify provisions applicable to this equipment per C403.1
exception
iC403.2.1
Load calculations
Provide load calculations performed per ASHRAE Std 183 or equivalent, using design
parameters per C302 and Appendix C; include load adjustments to account for energy
recovery
rL
�C, 7
03 2 2
Equipment and system
sizing
Indicate that output capacities of heating and cooling equipment and systems are no greater
than the smallest available equipment size that exceeds the calculated loads; note exceptions
taken
C403.2.3
C403.2.3.2
C403.2.13.1
HVAC equipment
performance requirements
(efficiency)
Provide equipment schedules on plans or complete MECH-EQ forms indicating type, capacity,
rated and WSEC minimum efficiencies for all heating and cooling equipment; include supply
and OSA cfms and operating hours for all air systems; identify heating and cooling equipment
that does not have a corresponding WSEC minimum efficiency (manufacturer rated)
C405.8
0403.2.14
Electric motor efficiency
List all motors 2 1/12 hp (that are not integral to a rated piece of equipment) in the mechanical
or electrical equipment schedules on plans; indicate hp, rpm, number of poles and rated
efficiency, or exception applied
For fractional hp motors (1/12 - 1 hp), indicate whether they are an electronically commutated
motor, have rated efficiency of at least 70%, or exception taken
For all HVAC fan systems that provide heating and / or cooling, provide system total
nameplate hp in MECH-FANSYS-SUM form
C403.2.11.1
Fan power limitation
For all applicable HVAC systems with total fan motor hp > 5hp, verify fan system motor hp or
bhp complies with fan power limits per equations in Table C403.2.11.1(1), provide MECH-
FANSYS form for each system
0403.2.11.2
Motor nameplate hp
For all applicable HVAC systems with total fan motor hp > 5hp, indicate fan motors specified
are the smallest available motor hp size greater than fan bhp, note exceptions taken
0403.2.11.3
Fan efficiency
For all applicable HVAC systems with total fan motor hp > 5hp, identify in equipment schedule
all fans required to comply with fan efficiency grade and indicate rated FEG is 2 67, or
exception taken; Indicate these fans are sized so total efficiency is within 15% of the fan
maximum total efficiency
frA.,0403.2.11.4
Nexhaust
Group R occupancy
fan efficacy
For all exhaust fans < 400 cfm in Group R occupancies, indicate in equipment schedule the
fan flow rate and efficacy (cfm/watt), or exception taken; refer to Table C403.2.11.4 (CE -57)
C403.2.13
Variable flow capacity -
fans
For fan motors 2 7.5 hp, indicate method of variable flow control (VSD or equivalent method) in
equipment schedule, or exception taken; for equivalent method for an HVAC system refer to
HVAC System Controls for additional requirements
C403.2.3
Maximum air cooled chiller
capacity
For chilled water plants and buildings with > 500 tons of cooling capacity, indicate air-cooled
chiller capacity is 5 100 tons, or exception taken
C403.4
Large capacity cooling
systems
For buildings with 2 300 tons of cooling capacity, indicate method of multi -stage or variable
capacity control (VSD, multiple staged compressors, or max capacity of any single unit < 66%
of the total)
C403.2.3.1
Non-standard water-cooled
centrifugal chillers
For water-cooled centrifugal chillers not designed for operation at standard conditions, provide
calculations documenting maximum full load and part load rated equipment performance
requirements
C403.2.13.1
C403.4.3.2
Centrifugal fan open -circuit
cooling towers
For open -circuit centrifugal fan cooling towers with 2 1,100 gpm capacity, indicate cooling
towers comply with efficiency requirements for axial fan open circuit cooling towers
C403.4.2
Large
For single boilers with > 500,000 Btu/h capacity, indicate multi -stage or modulating bumer
C403.4.2.5
capacity boiler
systems
For boiler system (single or multiple) with > 1,000,000 Btu/h capacity, indicate tumdown ratio
per Table C403.4.2.5 and method (multiple single input boilers, modulating boilers, or
combination)
0403.2.13
Variable flow capacity -
pumps
For pump motors 2 7.5 hp, indicate method of variable flow control (VSD or equivalent
method) in equipment schedule, or exception taken; for equivalent method for a hydronlc
system refer to Hydronic System Controls for additional requirements
C403.2.3
Gas and oil -fired forced air
fumace and unit heaters
For forced air furnaces with capacity 2 225,000 Btu/h and all unit heaters, indicate in
equipment schedule intermittent ignition or IID, flue or draft damper, and rated jacket loss
C403.2.4.8
Combustion heating
equipment
For combustion heating equipment with output capacity > 225,000 Btu/h, indicate modulating
or staged combustion control
C403.2.3.3
Packaged electric heating /
cooling equipment
Verify all packaged electric equipment with > 6,000 Btu/h cooling capacity and any amount of
heating is a heat pump; include in equipment schedules
C403.2.12
Heating outside a building Indicate
systems providing heating in non -enclosed outdoor occupied spaces are radiant
systems; refer to HVAC System Controls for additional requirements
C403.2.7.1
Kitchen exhaust hoods Indicate
on plans the type, duty and exhaust air rate of each kitchen hood, refer to HVAC
System Controls for additional requirements
�'
C403.2.4.3
Outdoor supply air, exhaust Indicate
and relief dampers
rating,
locations of OSA intake, and exhaust and relief outlet dampers on plans; indicate
whether dampers are Class 1 motorized, or gravity and exception taken (include leakage
cfm/sf); refer to HVAC System Controls for additional requirements for OSA dampers
C403.2.4.3
Indicate
Retum air dampers dampers
eligible
locations of retum air dampers that are Integral to economizer operation; verify
are motorized; indicate whether dampers are Class 1, or within packaged equipment
for leakage rating exception (include leakage rating, cfm/sf)
2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1 - Page 2 of 7
Mechanical Permit Plans Checklist
2015 Washington State Energy Code Compliance F
MECH-CHK
Project Title: Fill this Zine out on MECH-SUM
rcevisea January zui t
Date 1/1/2015
The following information is necessary to check a permit application for compliance with the mechanical systems and equipment requirements of the
Washington State Energy Code, Commercial Provisions.
Applicable
(yes,no,na)
Code Section
Code ProvisionInformation
Required -Must be in permit documents
Location in
Documents
Building Department
Notes
�I
0403.2.4.3
Stairway and shaft vent
dampers
Indicate location of stairway and shaft vent dampers on plans; verify dampers are Class 1
motorized; refer to HVAC System Controls for additional requirements
C403.2.4.4
Zone isolation dampers
For systems serving areas > 25,000 sf or spanning more than one floor, that include areas that
are expected to be occupied non -simultaneously; Identify isolation zone areas on plans and
locations of associated isolation dampers in HVAC distribution system; refer to HVAC System
Controls for additional requirements
C403.2.3.4
Humidification
For cooling systems with humidification equipment that are also required to have air
economizer, indicate humidifier is adiabatic (direct evaporative or fog atomization), or
exception taken
Add i tonal Efficiency Package Option, More Efficient HVAC Equipment & Fan Performance -
Mu comply with all 3 provisions to be eligible
C406.2.1
C403.2.3
HVAC system selection
To comply with additional efficiency package option, calculate the percentage of heating and
cooling equipment in the project (based on output capacity) that do not have a corresponding
WSEC listed efficiency; shall be less than 10% to comply
C406.2.2
C403.2.3
Minimum equipment
efficiency
To comply with additional efficiency package option, indicate that all listed heating and cooling
equipment have a rated efficiency that exceeds WSEC listed efficiency by at least 15%
C406.2.3
0403.2.11.3
Minimum fan efficiency
To comply with additional efficiency package option, indicate rated FEG of stand alone fans is
z 71; indicate these fans are sized so the fan efficiency at design conditions Is within 10% of
the maximum total or static efficiency
HVC System Controls
Indicate locations of thermostatic and humidity control devices and the zones they serve on
plans, including perimeter system zones
C403.2.4.1
Thermostatic controls
(thermostats and
humidistats)
Where adjacent (neighboring) zones are controlled by separate thermostats (including
perimeter systems used to offset heat gain or loss), and are connected by permanent
openings > 10% of either zone sf area, indicate controls configured to prevent adjacent zones
from operating in conflicting modes (one in heat, other in cool); applies to adjacent perimeter
zones, adjacent nonperimeter zones, and adjacent perimeter and nonperimeter zones
If applying Exception 2 to nonperimeter zones adjacent to perimeter zones, Indicate that
setpoints and deadband settings In these zones are coordinated so cooling in a nonperimeter
zone does not occur until the temperature in that zone is 5°F higher than the adjacent
perimeter zone temperature In heating
Et?
0403.2.4.1.1
Heat pump supplementary
heat
Indicate staged heating operation with compression as the first stage of heating and
supplemental heating controlled with outdoor lockout temperature set to 40°F or less
er-L
C
0403.2.4.1.2
Deadband
Indicate zone thermostatic controls configured with 5°F minimum deadband for systems that
control both heating and cooling
ye
C403.2.4.1.3
Setpoint overlap restriction
(thermostats)
If separate heating and cooling systems with separate thermostatic control devices are used to
serve a zone, indicate locations of both thermostatic control devices and the zone they serve
on plans
Indicate a limit switch, mechanical stop or DDC control with programming to prevent
simultaneous heating and cooling
C403.2.4.2
C403.2.4.2.1
C403.2.4.2.2
Automatic setback and
shutdown
Indicate zone thermostatic controls configured with required automatic setback and manual
override functions, setback temperatures, and control method (automatic time clock or
programmable controls); note exceptions taken
Ol��j
1
0403.2.4.2.3
Automatic (optimum) start
Indicate system controls that adjust equipment start time required to bring each area served
up to design temperature just prior to scheduled occupancy
i] FS
(V -
C403.2.4.3
Outdoor supply air dampers
Indicate automatic controls configured to close OSA damper during unoccupied equipment
operation; not including economizer cooling, night flush or IMC required OSA / exhaust
• F %
W /
C403.2.4.3
Stairway and shaft vent
P
Indicate method of activation of stairway and shaft vent dampers (fire alarm or interruption of
power)
C403.2.4.4
Zone isolation controls
For systems serving areas > 25,000 sf or spanning more than one floor, that include areas that
are expected to be occupied non -simultaneously; indicate controls that allow for independent
space conditioning of isolation zones; or exception taken
C403.2.12
Heating outside a building
Indicate occupancy sensing or timer switch controls configured to automatically shut off
heating system when area served is unoccupied
C403.2.4.5
Snow melt systems
Indicate automatic controls configured to shut off system when pavement temperature
exceeds 50°F and no precipitation is falling, and when outdoor air temperature exceeds 40°F
C403.2.4.6
Freeze protection system
controls
Indicate automatic controls to shut off system when outdoor temperature exceeds 40°F, or
conditions protect fluid from freezing
C403.2.4.9
Group R1 hotel / motel
guest rooms
For hotels and motels with over 50 guest rooms, indicate automatic controls serving guest
rooms that are capable of setback (heating) and set-up (cooling) of temperature setpoint by at
least 5°F; Indicate control method - activated by room entry or occupancy sensor
2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1 - Page 3 of 7
Mechanical Permit Plans Checklist
2015 Washington State Energy Code Compliance Forms for Commercial Buildings Including R2
MECH-CHK
_..._ _._.
- _._..___.._.......
Project 710e: Fill this line out onMECHSUM
nov,aCu JaiIualy CU 1r
Date 1/1/2015
The following information is necessary to check a permit application for compliance with the mechanical systems and equipment requirements of the
Washington State Energy Code, Commercial Provisions.
Applicable
(yes,no,na)
Code Section
Code ProvisionInformation
Required -Must be in permit documents
Location in
Documents
Building Department
Notes
Q
',1i/
C403.2.4.10
0403.2.4.11
Group R2 / R3 dwelling
units, Group R2 sleeping
units
For primary space conditioning system, indicate 5-2 programmable thermostats capable of two
setback periods per day; for all thermostats indicate purpose (heating only, cooling only, or
both), required temperature range and at minimum a 10°F deadband; or exception taken
Indicate method of ventilation air delivery (natural or mechanical) for each zone
C403.2.6
0403.2.11.4
Ventilation
If mechanically delivered, indicate that systems are configured to provide not more than 150%
of, but at least the minimum required volume of outdoor air to each zone per IMC, ASHRAE
62.1 or other applicable code (WAC, OSHA, etc); or exception taken
If delivered via natural ventilation, identify required elements per IMC including minimum
openable area to the outdoors or qualifying adjoining spaces
C403.2.6.2
Demand controlled
ventilation
Identify spaces > 500 sf with occupant load > 25 people/1,000 sf per IMC; for each space
indicate whether It is served by an HVAC system with total design OSA > 3,000 cfm, and / or
the system has airside economizer or automatic modulating OSA dampen indicate OSA
controls are configured to provide demand controlled ventilation or provide supporting
documentation for applied exception
C403.2.6.3
Occupancy sensors
For gyms, classrooms, auditoriums and conference rooms > 500 sf, indicate occupancy -based
OSA control when space is unoccupied and method (closes OSA damper or shuts -off
equipment); or alternate means provided to automatically reduce OSA when space is partially
occupied
C403.2.6.4
C403.2.6.4.1
Enclosed loading dock
ventilation
For enclosed loading docks, indicate ventilation / exhaust system method of activation (gas
detection system for CO and NO2, or occupancy sensors), and control method (staged or
modulating)
C403.2.6.4
C403.2.6.4.2
Enclosed parking garage
ventilation
For enclosed parking garages, indicate ventilation / exhaust system activated by gas detection
system for CO and NO2, and control method (staged or modulating); or exception taken
C403.2.7.1
Kitchen exhaust hoods
Provide calculations that show a balanced accounting of total kitchen exhaust (include all
hoods) with % of: supply air, transfer air from adjacent spaces, and make-up air, if applicable,
indicate that direct make-up air to each hood does not exceed 10% of hood exhaust
For kitchens with total hood exhaust exceeding 2,000 cfm, indicate exhaust air rate per Table
C403.2.7.1 and compliance method (DCV, energy recovery, or transfer air that would
otherwise be exhausted)
C403.2.7.2
Laboratory exhaust systems
Refer to Systems Requiring Energy Recovery for requirements
C403.2.13
Variable flow capacity -
HVAC system fans
For HVAC fan motors a 7.5 hp, indicate method of variable flow control (VSD, or equivalent
control method that reduces design air volume by 50% at 1/3 static design pressure); note
exception taken
C403.3.1
DX air handler variable
cooling control
(Under Integrated
For DX air handlers with economizer and cooling capacity a 65,000 Btu/h, indicate number of
cooling stages provided and method (multiple compressors and / or variable speed
compressors); indicate minimum displacement (capacity reduction) as % of full load
Economizer)
Indicate control method (cooling capacity controlled in response to space temperature, space
temperature controlled by modulating supply airflow, or both)
For DX air handling units with cooling capacity z 65,000 Btu/h and evaporative and chilled
water air handling units with fan 2 0.25 hp, indicate whether system is single zone or multiple
zone and related control method (cooling capacity controlled in response to space
temperature, space temperature is controlled by modulating supply airflow, or both)
C403.2.11.5
Fan airflow control
For mechanical cooling systems (includes DX and chilled water coils) that control cooling
capacity in response to space temperature - Provide a minimum of two stages of fan control;
indicate minimum fan speed is 5 66% of full speed drawing 5 40% of full speed fan power
during periods of low cooling or ventilation only
For other mechanical cooling systems (includes DX and chilled water coils) that control space
temperature by modulating airflow (in lieu of, or in addition to, controlling capacity in response
to space temperature) - Provide fan controls for modulating supply airflow; indicate minimum
fan speed is 5 50% of full speed drawing 5 30% of full speed fan power during periods of low
cooling or ventilation only; or exception taken
C403.2.4.12
DDC system capabilities
Provide central and zone level DDC controls as required based on system application,
capacity or size thresholds and other qualification per Table C403.2.4.12.1
Identify all DDC system input / output control points; indicate capability for trending and
graphical display
Du ing Systems
C403.2.8.1
Duct
Indicate on plans that all ductwork is constructed and sealed per IMC
C403.2.8.3
construction
For OSA ductwork, also indicate on plans that ductwork meets air leakage requirements per
C402.5 and vapor retarder requirements per the IBC
C403.2.8.3
Duct pressure
classifications
Identify location of low, medium and high pressure ductwork on plans
C403.2.8.3.3
High pressure duct leakage
test
Indicate high pressure duct leakage testing requirements on plans; provide test results to
jurisdiction when completed
2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1 - Page 4 of 7
Mechanical Permit Plans Checklist
2015 Washington State Energy Code Compliance F
MECH-CHK
Project Title: Fill this line out on MECH-SUM
Kevised January 2017
Date 1/1/2015
The following information is necessary to check a permit application for compliance with the mechanical systems and equipment requirements of the
Washington State Energy Code, Commercial Provisions.
Applicable
(yes,no,na)
Code Section
Code ProvisionLocation
Information Required - Must be in permit documents
in
Documents
Building Department
Notes
For supply and retum ductwork located In unconditioned space or outdoors, indicate R -value
of insulation on ductwork on plans; identify climate zone; note exceptions taken
I pr
C403.2.8.1
C403.2.8.2
For supply ductwork located in conditioned space, identify if design supply temperature is <
Duct insulation 55°F or> 105°F and indicate R -value of insulation on this ductwork on plans; note exception
taken
i
For OSA ductwork, shafts and plenums, indicate R -value of insulation on these elements on
_plans per Table C402.1.3 for steel -framed walls; note exception taken
Pipin;
Systems
C403.2.9
Piping insulation
Indicate design temperature range of fluid conveyed in piping and thickness of insulation (in
inches) on hydronic piping plans; or exception taken
C403.2.9.1
Piping insulation exposed to
weather
Indicate method of protection of pipe insulation from damage / degradation on hydronic piping
plans
Econlmizers
Identify in equipment schedules on plans or in MECH-EQ forms at cooling systems requiring
air economizer controls
C403.3
Air economizer required
Provide MECH-ECONO form indicating systems utilizing air economizer exceptions, including
those with water -side economizer In lieu of air economizer, indicate on plans eligible
exception(s) taken and measures to comply with exception(s)
C403.3.1
Integrated economizer
operation - air and water
Indicate air and water -side economizers are configured for partial cooling operation even
where additional mechanical cooling is required to meet the load
C403.3.2
Economizer heating system
impact - air and water
Verify control method of HVAC systems with economizers does not increase building heating
energy usage during normal operation
wCiS
C403.3.3.1
Air economizer capacity
Indicate modulating OSA and return air dampers are configured to provide up to 100% OSA
for cooling
1E5
C403.3.1
0403.3.3.2
Integrated air economizer
Verify mechanical cooling controls are interlocked with air economizer controls so the outside
air damper remains in 100% open position when mechanical cooling is also required to meet
the cooling load, until the leaving air temperature is < 45°F
For systems with cooling capacity a 65,000 Btu/h, verify that control of economizer dampers is
not based only on mixed air temperature; or exception taken
b IA.
C403.3.3.3
controls Air economizer high limit
Indicate high limit shut-off control method and required high limit per Table 0403.3.3.3
C403.3.4.1
Water economizer capacity
For eligible systems where water -side economizer may be provided in lieu of air economizer,
indicate system is capable of 100% design cooling capacity at 50°F db / 45°F wb OSA
temperatures
C403.3.4.2
Water economizer
maximum pressure drop
Indicate pressure drop across precooling coils and heat exchangers in water economizer
system do not exceed pressure drop limit
C403.3.1
DX air handling equipment
control
For DX air handlers with economizer and cooling capacity a 65,000 Btu/h, refer to HVAC
System Controls for requirements
C403.2.4.7
DX equipment economizer
fault detection and
diagnostics
For DX air handlers with economizer and cooling capacity a 54,000 Btu/h, provide a fault
detection and diagnostics (FDD) system to monitor economizer system operation and report
faults
Systems
Requiring Energy Recovery
Energy recovery (ER) -
For systems with design OSA > 5,000 cfm, or design suppy air cfm and % OSA exceeding the
values in Tables C403.5.1(1) or (2), indicate exhaust air ER method; or exception taken with
supporting calculations
C403.5.1
ventilation / exhaust
systems
For rooms served by multiple systems with aggregate design OSA > 5,000 cfm, or aggregate
design supply air cfm and % OSA exceeding the values in Tables C403.5.1(1) or (2), indicate
exhaust air ER method; or exception taken with supporting calculations
Indicate ER rated effectiveness that increases OSA enthalpy by z 50% based on delta
between OSA and retum air enthalpies at design conditions
C403.2.7.2
Laboratory exhaust systems
(energy recovery)
For buildings with total lab exhaust > 5,000 cfm, indicate method of energy recovery used to
precondition laboratory make-up air, ER effectiveness (min 25°F); or alternative method per
exception (VAV exhaust, semi -conditioned makeup, or CERM calculation)
C404.10.4
(under
C404.11)
Pools and permanent spas
exhaust systems
For buildings with pools or spas with water surface area > 200 sf, indicate exhaust air ER
method and use of waste heat (preheat ventilation air, pool water or service hot water); or
exception taken
(energy recovery)
Indicate ER system has the rated effectiveness and is configured to decrease the exhaust air
temperature at design conditions by a 36°F
0403.5.2
Energy recovery -
For buildings with on-site steam heating systems, indicate condensate water ER
•
steam condensate systems
For buildings that use off-site generated steam where condensate Is not retumed to the
source, indicate on-site condensate water ER
2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and at R1 - Page 5 of 7
Meclihnical Permit Plans Checklist
MECH-CHK
2015 Washington State Energy Code Compliance Forms for
_ — ........... - ........... ...... .......
Protect Title: Fill this line out on MECH-SUM
rceviseu January tvr r
Date 1/1/2015
the following information is necessary to check a permit application for compliance with the mechanical systems and equipment requirements of the
Washington State Energy Code, Commercial Provisions.
Applicable
(yes,no,na)
Code Section
Code ProvisionInformation
Required - Must be !n permit documents
Location in
Documents
Building Department
Notes
ij IA'
0403.5.3
Energy recovery -
For buildings with food service, meat or deli departments that have 2 500,000 Btu/h of remote
refrigeration capacity for coolers / freezers, indicate condenser ER and use of captured energy
(service water heating, space heating, or dehumidification reheating)
cooler / freezer condensers
For buildings with 2 40,000 sf conditioned floor area and with z 1,000,000 Btu/h of remote
refrigeration capacity for coolers / freezers, indicate condenser ER and use of captured energy
for service water heating and also for space heating, or dehumidification reheating
C403.5.4
Energy recovery -
condenser systems
For buildings with 24-hour operation and with > 1,500,000 Btu/h of heat rejection capacity and
design service hot water load > 250,000 Btu/h, indicate condenser ER to pre -heat service
water, or exception taken. Provide calculations showing the amount of recovered heat that is
utilized (60% of peak heat rejection load or pre -heat service water to 85°F).
Hydronic
System Controls
0403.2.13
C403.4.2.7
Variable flow control -
hydronic system pumps
For hydronic system pump motors z 7.5 hp, indicate method of variable flow control (VSD or
equivalent method that requires z 30% design wattage at 50% design fluid flow); note
exception taken
Identify whether hydronic coils have DDC controls and associated manner of pump speed
control (differential pressure, zone hydronic demand, etc)
For boilers that provide building heating, indicate controls that provide heating water
temperature setback based on outdoor temperature
C403.2.5
C403.4.2.4
Hydropic system setback
and part load controls
For heating and chilled water systems 2 300,000 Btu/h, indicate systems are configured to
automatically reset supply water temperature based upon demand; or exception taken.
If system pump motor hp a 3 hp, also indicate controls automatically reduce flow by a 50%.
For chilled water systems (2 300,000 Btu/h, pump motor hp 2 3 hp) that serve water-cooled
unitary air conditioners, indicate VSD or staged pumps in chilled water system and heat
rejection loop that reduce pump flow so that one control valve is nearly wkie open, or to
maintain a minimum differential pressure; or exception taken
C403.4.2
Boiler sequencing
Indicate automatic controls that sequence operation of multiple boilers
C403.4.6
Hot gas bypass limitation
For cooling equipment with hot gas bypass, provide either multiple step unloading or
continuous capacity modulation; indicate bypass capacity per Table C403.4.6
C403.4.2.2
Two -pipe changeover
systems
Indicate changeover deadband (min 15°F), heating / cooling mode scheduling and
changeover temperature range (limit 30°F)
C403.4.2.6
Chiller / boiler plant pump
isolation
Indicate controls are configured to automatically reduce overall plant flow and shut-off flow
through individual chillers and boilers when not in use
C403.2.13.1.1
C403.4.3.1.1
Heat rejection equipment -
variable flow control
For cooling towers with fan motors 2 7.5 hp, indicate VSD and method to adjust fan speed
(adjusted based on leaving fluid temperature or condenser temperature / pressure of heat
rejection device)
C403.4.3.1.2
For multiple -cell heat rejection equipment with VSD, indicate controls that ramp all fans in
unison
C403.4.3.3
Heat rejection equipment -
cooling tower flow tumdown
Indicate open -circuit cooling towers with multiple pumps or VSD control are designed so all
cells can be run in parallel
C403.4.2.3.1
Water loop heat pump -
deadband
Indicate capability of central equipment to provide minimum 20°F water supply temperature
deadband between heat rejection and heat addition modes; or exception taken
C403.4.2.3.2.1
Water loop heat pump -
heat rejection equipment,
Zone 4
Indicate type of cooling tower (open- or closed-circuit) in equipment schedule; indicate method
used to limit system heat loss when heat rejection is not needed
C403.4.2.3.2.2
Water loop heat pump -
heat rejection equipment,
Zone 5
For open- or closed-circuit cooling towers, provide a heat exchanger that separates the coolin
tower and heat pump loop g
C403.4.2.3.3
Water loop heat pump -
isolation valves
For hydronic heat pump systems with total system power> 10 hp, indicate 2 -way isolation
valves on each heat pump and variable flow system control
Dedicated Outdoor Air Systems (DOAS) - Option through 6/30/16, Prescriptive 7/1/2016
C403.6
C403.6.3
Dedicated outdoor air
systems
For buildings with office, retail, education, library and fire station spaces, identify these spaces
on plans; indicate that ventilation air in each occupied space is provided via a DOAS system;
or document compliance with C403.6.3 Impracticality; or exception taken (buildings complying
with C402.4.1.4 or C406.6 may not utilize exceptions)
C403.6.1
Energy recovery ventilation
with DOAS
For all DOAS systems, indicate exhaust air ER method; or exception taken with supporting
calculations. Indicate ER rated effectiveness that increases OSA enthalpy by t 50% based on
delta between OSA and retum air enthalpies at design conditions.
C403.6.2
Heating / cooling system
controls with DOAS
Indicate equipment associated with the delivery of zone level heating and cooling (fans,
hydronic pumps, primary air dampers, etc) are configured to shut off, and central equipment is
configured to tum down, when there is no call for heating or cooling in the zone they serve
if applying Exception to heating / cooling fans used for air mixing in the space during deadband
periods, include fan watts per cfm in equipment schedule
2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1 - Page 6 of 7
Mechanical Permit Plans Checklist
MECH-CHK
2015 Washington State Energy Code Compliance Forms for Commercial Buil in
- _ - - - - -- - --- -- -..- -
Project Title: . Fill this line out on MECH-SUM
, wa.,oau uanua 7 c� i t
Date 1/1/2015
The following information is necessary to check a permit application for compliance with the mechanical systems and equipment requirements of the
Washington State Energy Code, Commercial Provisions.
Applicable
(yes,no,na)
Code Section
Code ProvisionInformation
Required -Must be in permit documents
location in
Documents
Building Department
Notes
Y
g
(
C402.4.1.4
C403.6
Increased prescriptive
maximum vertical
fenestration area with DOAS
Indicate that all occupied, conditioned spaces are served by a DOAS per C403.6
Additional Efficiency Package Option, Dedicated Outside Air Systems (DOAS)
C406.6
Building provided with
DOAS
To comply with additional efficiency package option, indicate that 90% or more of all occupied,
conditioned spaces are served by a DOAS per C403.6
Multiple Zone
Air Systems
NfA
f�
C403.4.4
Air systems serving multiple
zones
Identify supply air systems serving multiple zones and the zones they serve on plans; indicate
whether system is VAV and method of primary air control; or provide supporting
documentation for applied exception to VAV
Provide equipment schedules on plans or MECH-EQ form that list all VAV air terminals and
types
C403.4.4
VAV systems serving
multiple zones
For each air terminal include: maximum airflow rates for primary supply air during zone peak
heating and zone peak cooling; maximum airflow during reheating, recooling or mixing;
minimum airflow rate to maintain required ventilation, and the basis for these values; if IMC or
ASHRAE 62.1 multiple zone equation is basis for minimum flow rates, provide calculation on
plans
C403.4.4.1
Single duct VAV terminal
units
Indicate single duct terminal units are configured to reduce primary supply air before reheating
or recooling
C403.4.4.2
Dual duct systems - terminal
units
For systems with separate warm air and cool air ducts, indicate terminal units are configured to
reduce the flow from one duct to minimum before mixing with air from the other duct
Indicate locations of duct static pressure sensors on plans; Include at least one sensor per
major duct branch; verify controller setpoint pressure at each sensor is 5 1.2 inch w.g.
r
C403.4.1.1
C403.4.1.2
VAV system static
pressure sensors -
sensors and DDC set points
For systems with zone level DDC, indicate controls are configured to monitor zone damper
positions and reset static pressure setpoint based on the zone requiring most pressure;
include control logic that automatically detects and generates an alarm if any zone excessively
drives reset logic, and allows building operators to exclude zones from reset logic
C403.4.4.3
Multiple -zone VAV system
ventilation optimization
controls
For systems with zone level DDC controls, indicate controls are configured to automatically
reduce outdoor airflow in response to changes in system ventilation efficiency; or exception
taken
C403.4.4.4
VAV system supply air reset
Indicate controls automatically reset supply air temperature in response to building loads or
outdoor air temperature; or exception taken
MAiltiple
Zone HVAC Systems, High Efficiency VAV - Required for systems utilizing C403.6 DOAS Exception 2, must comply with all 16 provisions
C403.7,
Item 1
Air economizer
Indicate system is configured for 100% air economizer operation and complies with all related
economizer requirements per C403.3 (without economizer exceptions)
C403.7,
Item 2
Direct digital controls (DDC)
Provide DDC controls for all components of system; identify all DDC system input / output
control points; indicate capability for trending and graphical display
C403.7,
Item 3
Outdoor airflow
measurement and reduction
For systems with minimum OSA > 2,500 cfm, indicate outdoor airflow monitoring station that
measures OSA intake under all load conditions; indicate control sequence that increases or
reduces system OSA cfm based on VAV terminal feedback of ventilation efficiency (per
C403.4.4.3 without exceptions) or DCV (per C403.2.6.2)
C403.7,
Item 4
Supply airflow measurement
For systems with minimum OSA > 2,500 cfm, Indicate supply airflow monitoring station
capable of measuring supply air delivered to VAV terminals under all load conditions
C403.7,
Item 5
Zone isolation and
maximum area served
Verify maximum area served by a single HEVAV system is 5 50,000 sf, or one entire floor,
whichever is greater, in addition If a system serves > 25,000 sf, that includes areas that are
expected to be occupied non -simultaneously, indicate zone isolation controls per C403.2.4.4
C403.7,
Item 6
Interior / exterior zone
design supply air
temperature
Verify that VAV terminals serving interior cooling driven loads are sized per design supply air
temperature that is 5°F higher than VAV terminals serving exterior zones
C403.7,
Item 7
Maximum air terminal inlet
velocity
Identify air terminals with minimum primary airflow setpoints > 50% of maximum setpoint in
equipment schedule or MECH-EQ form; indicate air terminal inlet velocity does not exceed 900
fpm
C403.7,
Item 8
Sequence of operation
Indicate DDC system sequences of operation are designed and configured per ASHRAE GPC
36
C403.7,
Item9
Maximum allowable system
brake horsepower
Verify fan system bhp is 5 90% of the bhp limit per Option 2 equation in Table C403.2.11.1(1),
provide MECH-FANSYS form for each system
C403.7,
Item 10
Fan -powered terminal unit
motor and control
Indicate all series and parallel terminal fans have electronically commutated motors; indicate
DDC control system is configured to vary air terminal fan speed as a function of the load;
indicate fan speed during periods of low heating, low cooling, or ventilation only is 5 66% of
peak design air flow or provide supporting documentation for applied exception
2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1 - Page 7 of 7
Mechanical Permit Plans Checklist
MECH-CHK
2015 Washington State Energy Code Compliance Forms for Commercial Buildings including R2 & R3 ov
Project Title: Fill this Zine out on MECH-SUM (Date 1/1/2015
the following information is necessary to check a permit application for compliance with the mechanical systems and equipment requirements of the
Washington State Energy Code, Commercial Provisions.
Applicable
(yes,no,na)
Code Section
Code Provision
Information Required - Must be in permit documents
-
Location in
Documents
Building Department
Notes
+�
f
C403.7,
Item 11
Application of single duct
un fan-poweredd terminal
Indicate VAV terminal types on plans; verify fan -powered terminal units only serve perimeter
zones with envelope loads; verify all other zones are served by single duct terminal units
C403.7,
Item 12
Fan -powered terminal unit
primary air reset
Indicate DDC controls are configured to automatically reset the primary supply air cfm setpoint
of all fan -powered terminal units to the minimum required to maintain ventilation during
occupied heating or deadband, based upon the VAV air handling unit OSA ventilation fraction
C403.7,
Item 13
High occupancy space
controls
For spaces > 150 sf with occupant density 2 25 people / 1000 sf, indicate space is served by a
dedicated terminal unit with DCV control that resets terminal unit ventilation setpoint; also
indicate occupancy sensor control that automatically reduces minimum ventilation to zero and
sets back room heating and cooling setpoints by 2 5°F
C403.7,
Item 14
Dedicated HVAC systems
For server, electronic equipment, telecom or similar spaces with cooling loads > 5 W/sf,
Indicate spaces are served by independent HVAC systems that are separate from HPVAV
systems serving rest of building; indicate dedicated HVAC systems have air economizer
controls or energy recovery per C403.3 Exception 9
Indicate whether systems are served by a high efficiency heating water plant, or a high
efficiency chilled water plant
C403.7,
Central plant efficiency
If complying via high efficiency heating water plant: Indicate all VAV terminals have hydronic
heating coils served by heating water system with either gas-fired boiler(s) with thermal
efficiency 2 90%, air -to -water heat pumps, or heat recovery chillers
Item 15
If complying via high efficiency chilled water plant: Indicate all VAV air handlers have cooling
coils served by chillers with rated IPLV efficiency that exceeds WSEC listed IPLV by at least
25% per Table C403.2.3(7) (note water-cooled IPLV is max, all others are min); indicate
smallest chiller or compressor in plant is 5 20% of total plant capacity, or provide thermal
storage sized for 5 20% of total plant capacity
C403.7,
Item 16
Faun detection and
diagnostics
Indicate DDC system includes a fault detection and diagnostics (FDD) system configured to
monitor operation and provide fault reporting of required parameters for all VAV air handlers
and VAV air terminal units in the HPVAV system
HVA Equipment Energy Use Metering
C409.3.1
HVAC equipment energy
use metering
For new buildings > 50,000 sf and building additions > 25,000 sf, verify energy use metering of
all equipment used to provide space heating and cooling, dehumidification and ventilation will
be provided per C409; indicate equipment eligible for exception
Documentation
and System Specific Requirement To Support Commissioning
Scope of mechanical
Indicate that all mechanical systems, equipment, and controls for which the WSEC requires
control functions and / or configuration to perform specific functions are required to be
commissioned;
C408.2
systems commissioning
For buildings with z 240,000 Btu/h total output cooling capacity or a 300,000 Btu/h total output
heating capacity, indicate that all mechanical systems regardless of individual capacity are
required to be commissioned; or provide building heating / cooling capacity calculation
demonstrating eligibility for exception
Indicate in plans and specifications that Cx per C408 is required for all applicable mechanical
systems;
C403.2.10
C408.1.1
C408.1.2
C408.1.4.2
Commissioning
requirements in construction
documents
Include general summary with at a minimum of Items 1 thru 4 of the Cx plan per C408.1.2
including: narrative description of activities, responsibilities of the Cx team, schedule of
activities including verification of project close out documentation per C103.6, and conflict of
interest plan (if required);
C103.6
Include in general summary that a Cx project report or Compliance Checklist (Figure
C408.1.4.2) shall be completed by the Certified Cx Professional and provided to the owner
prior to the final mechanical Inspection.
C408.2.2
Air system and hydronic
system balancing
Indicate in plans that air and fluid flow rates shall be tested and balanced within the tolerances
defined in the specifications; indicate systems shall be balanced in a manner to first minimize
throttling losses, then adjusted to meet design flow conditions
C408.2.2.1
Air system balancing
devices
Indicate devices that provide the capability to balance all supply air outlets, zone terminals and
air handling equipment requiring system balancing
C408.2.2.2
Hydronlc system balancing
devices
Indicate devices that provide the capability to isolate, balance and measure flow across all
hydronic equipment requiring system balancing including heating and cooling coils and pumps
C408.2.3
Functional performance
testing criteria
Identify in plans and specifications the intended operation of all equipment and controls during
all modes of operation, including interfacing between new and existing -to -remain systems
Project Close Out Documentation
`If�i,
`rV�
I
C103.6
Documentation and project
close out submittal
requirements
Indicate in plans that project close out documentation and training of building operations
personnel is required for all mechanical components, equipment and systems govemed by
this code; Indicate close out documentation shall include: record documents, O&M manuals,
applicable WSEC compliance forms and calculations
2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1
Ec`onomizer Exceptions MECH-ECONO
2015 Washington State Energy Code Compliance Forms for Commercial Buildings including R2 & R3 over 3 stories and all R1 Revised January 2017
Project Title: Fill this line out on MECH-SUM
Date 1/1/2015
All cooling systems shall be configured to provide air economizer operation, regardless of
system capacity, for new construction and mechanical system alterations. Various exceptions to
this requirement are available. Identify all systems that an economizer exception will be applied
to and additional information as noted below.
For Building Dept. Use
Economizer
Exception
Summary
Refer to Section
C403.3 for
descriptions of
economizer
provisions and
exceptions. For
alterations refer
to Section
C503.4 and
Table C503.4.
ECONOMIZER EXCEPTIONS - NEW CONSTRUCTION AND ADDITIONS
Exp 1
Cooling equipment serving spaces that are provided with a dedicated
outdoor air system (DOAS) per C403.6. Spaces served shall have year-
round design cooling loads from lights and equipment less than 5 watts per
square foot.
System ID
Lighting +
Equipment
Loads (W/sf)
Exp 2 Single zone unitary or package systems with dehumidification that affect
other systems such that air economizer would increase energy
consumption.
System ID
Exp 3
High efficiency single zone unitary or packaged systems. Equipment
cooling efficiency shall be better than the WSEC required minimum
efficiency by at least 64% in Climate Zone 4C and 59% in Climate Zone 5B
per Table C403.3.
System ID
Exp 4 Equipment that provides hydronic chilled water for chilled beams and
chilled ceiling systems that is served by a water economizer system per
C403.3.4 in lieu of air economizer.
System ID
Exp 5 Water -source heat pumps with heat recovery. Heat pump efficiency shall
be 15% better than WSEC required minimum efficiency. Provide at
minimum 60% air economizer. Energy recovery to preheat OSA shall
have at least 50% effectiveness. Additional system requirements apply.
System ID
Exp 6 Cooling equipment serving Group R occupancies. Per unit limit
is less than 20,000 Btu/h cooling capacity for equipment installed
outdoors or in a mech room adjacent to the outdoors. For cooling
equipment installed in other locations the unit limit is less than
54,000 Btu/h. Efficiency shall be 15% better than WSEC
required minimum efficiency.
System ID
Equipment
Location
Cooling
Capacity
(Btu/h)
Exp 7 Variable refrigerant flow (VRF) systems with energy recovery. Outdoor
unit shall be a reverse -cycle heat pump with variable speed
compressor(s) and condenser fan(s). Outdoor unit cooling capacity shall
be not less than 65,000 Btu/h. Energy recovery to preheat outdoor air
shall have at least 50% rated effectiveness. System shall be capable of
providing simultaneous heating and cooling by tranferring recovered
energy from zone(s) in cooling mode to other zone(s) that are in heating
mode.
Outdoor Unit
System ID
Cooling
Capacity
(Btu/h)
Exp 8 Cooling equipment serving Controlled Plant Growth Environments.
Equipment cooling efficiency shall be better than WSEC required
minimum efficiency by at least 20%. Not eligible: unitary and applied
heat pumps.
System ID
SEER, EER, &
IEER
Exp 9 Cooling equipment with energy recovery. Spaces served shall have
year-round design cooling loads from lights and equipment greater than
5 watts per square foot. Energy recovery system shall utilize recovered
energy for on-site space heating or preheating of service hot water.
Provide calculations to the code official that demonstrate the amount of
recovered energy used for on-site heating purposes is equivalent to the
annual energy that would be saved by the cooling system with air
economizer per C403.3.
System ID
Lighting +
Equipment
Loads (W/sf)
2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1
Economizer Exceptions, cont. MECH-ECONO
2015 Washington State Energy Code Compliance Forms for Commercial Buildings including R2 & R3 over 3 stories and all R1 Revised January 2017
Project Title:
Date 1/1/2015
Economizer
Exception
Summary
Refer to Section
C403.3 for
descriptions of
economizer
provisions and
exceptions. For
alterations refer
to Section
C503.4 and
Table C503.4.
ECONOMIZER EXCEPTIONS - NEW CONSTRUCTION AND ADDITIONS, CONTINUED
Exp 10 Cooling equipment for dedicated server, electronic equipment or
telecom switch rooms. Per building limit for this exception is
240,000 Btu/h cooling capacity or 10% of required building air
economizer capacity, whichever is greater. Part load control
required over 85,000 Btu/h. Additional requirements apply.
Option a - Cooling equipment efficiency shall be 15% better than
the WSEC required minimum efficiency..
Option b - Waterside economizer required. Cooling equipment
efficiency shall be 5% better than the WSEC required
minimum efficiency.
Option c - Waterside economizer required. All cooling equipment is
subject to ASHARE Standard 127.
System ID
Compliance
Option
Cooling
Capacity
(Btu/h)
Total Claimed Exempt Capacity:
Total building air economizer capacity (if claimed > 240 kBtu/h):
Alternate Exp 10 Capacity Limit:
ECONOMIZER EXCEPTIONS - MECHANICAL SYSTEM ALTERATIONS OR REPLACEMENT
C503.4 Pre -approved design alternative to full compliance with air economizer
Exp 1 requirement. An altemative for mechanical system alterations where existing
building constraints make full compliance with air economizer requirement
impractical. Provide calculations to the code official that demonstrate the
proposed altemate design strategy provides similar energy savings to the
annual energy that would be saved by the cooling system with air economizer
per C403.3.
System ID
Alt. Strategy
ECONOMIZER EXCEPTIONS - SIMPLE SYSTEMS
C503.4 Qualifying small equipment. Per unit limit less than 33,000 Btu/h. Per
Exp 2 building limit for this exception is 72,000 Btu/h cooling capacity or 5% of
required building air economizer capacity, whichever is greater. Cooling
equipment efficiency shall be 15% better than WSEC required minimum
efficiency. Not eligible: non -unitary equipment, unitary equipment installed
outdoors or in mech room adjacent to outdoors, equipment installed during
new construction, shell -and -core construction, or initial tenant
improvement.
System ID
Cooling
Capacity
(Btu/h)
Total Claimed Exempt Capacity:
Total building air economizer capacity (if claimed > 72,000 Btu/h):
Alternate C503.4 Exp 2 Capacity Limit:
C503.4 Equipment that provides hydronic chilled water for chilled water terminal
Exp 3 units. Equipment part load cooling efficiency (IPLV) shall be better than
WSEC required minimum efficiency by at least 25%. Per building limit
for this exception is 480,000 Btu/h cooling capacity or 20% of required
building air economizer capacity, whichever is greater. Chilled water
terminal units serving Group R occupancies are not included in the
building capacity total.
System ID
Cooling
Capacity
(Btu/h)
Total Claimed Exempt Capacity:
Total building air economizer capacity (if claimed > 480,000 Btu/h):
Alternate C503.4 Exp 3 Capacity Limit:
Table Compliance Options for alteration or replacement of existing
C503.4 mechanical cooling equipment per Table C503.4. Refer to table
and all applicable table footnotes for full requirements. Applies to
the following retrofit conditions:
Option a - Any new or replacement equipment
Option b - Replacement equipment of same type with same or
smaller cooling output capacity.
Option c - Replacement equipment of same type with large
cooling output capacity.
Option d - New equipment added to existing system or
replacement equipment that is different than existing
being replaced.
System ID
Equipment
Type
Compliance
Path
• 2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1
Mechanical Fan System Power Allowance*
MECH-FANSYS-SUM
2015 Washington State Energy Code Compliance Forms for Commercial Buildings includin R2 & R3 over 3 stories and II R1 R ' ed J
g
• Project Title: Fill this line out on MECH-SUM
a eves anuary 201
Date 1/1/2015
For Building Dept. Use
HVAC Air Distribution System Schedule
List all HVAC systems that have the capability to provide heating and/or cooling to the spaces -they serve.
System or
Primary Supply
Fan ID
Speed Control
(Note 1)
Description
(Note 2)
System Total
Nameplate HP
(Note 3)
Fan Power
Calculation
Required
(Note 4)
VTO 1
N
o Q4040itt2A5
t. 2.7.-
N`04-
.
Note 1 - Constant Volume (CV), Variable Air Volume (VAV), or Hospital/Lab CV system that qualifies for VAV budget per C403.2.11.1 Exception
Single zone VAV systems shall comply as CV.
Note 2 - Describe system type and list all fans (or groups of fans) associated with the delivery and removal of conditioned air by the system.
all supply, retum/relief, exhaust and exhaust hoods (>1 hp), make-up air, dedicated outside air (DOAS), booster fans, and series
terminals. VAV parallel fan powered terminals and economizer relief fans do not need to be included if the fans do not operate at
conditions.
Note 3 - Enter the total nameplate hp of all fans associated with the delivery and removal of conditioned air by the system.
Note 4 - This form automatically identifies whether a MECH-FANSYS form is required to demonstrate compliance with the fan power allowance
or this information is not required because the system has a combined total nameplate motor hp that is 5 hp or less (No)
1.
Include
fan -powered
peak
(Yes),
MECH-FANSYS Forms ,
A MECH-FANSYS form shall be provided for each system with total nameplate hp greater than 5'hp. Select (Add Fan
System Form) to generate an additional form. Added forms can be deleted with button in cell E32 of the added form.
2.015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1
Mechanical Fan System Power Allowance').
MECH-FANSYS
2015 Washington State Energy Code Compliance Forms for Commercial Buildings including R2 & R3 over 3 stories and ali R1 Revised Janua 2017
Project Title: Fill this line out on MECH-SUM
9
ry
Date 1/1/2015
A separate MECH-FANSYS form must be completed for every HVAC system that exceeds the 5 hp threshold.
For Building Dept. Use
Fan System ID
S stem Supply Fan
Y PP Y
Speed Control�system
, 4
3 1.1
Constant Volume (CV), Variable Air
Volume (VAV), or Hospital/Lab CV
that qualifies for VAV budget per
C403.2.11.1, Exception 1
Compliance Option
Compliance is based upon either the fan motor nameplate horse power
(Option 1), the fan brake horsepower (Option 2), or C403.7 high efficieny
VAV fan brake horsepower (10% less than Option 2). The bhp calculation
provides adjustments for special equipment per Table C403.2.11.1(2).
Fan S stem Supply
Y PP Y
CFM Total
-
In Fan Equipment Schedule below, provide maximum design supply airflow
rate (CFM) of all supply fans serving the conditioned space in Fan
Equipment Schedule below. Fan System CFM Total is the supply airflow of
the central air handler at peak design conditions. Additional volumetric air
flow provided at zone fan terminals, booster fans, or through induction is
not included In the supply CFM total. However, the fan power of this
equipment is included in the HP"and •BHP calculations. Fan System
Supply CFM Total Is automatically calculated by the form.
Fan Equipment Schedule
Fan ID and Location
Fan Type
Quantity of Fan Type
Total CFM
(Note 1)
Total Nameplate
HP (Note 2)
Total BHP
(Note 3)
Note 1 - Total CFM is the maximum CFM of the listed fan(s) when Total Proposed:
operating at peak design operating conditions.
Note 2 - Total namplate hp of the listed fan(s). Total Allowance:
Note 3 - Total brake horsepower (bhp) of the listed fan(s) at peak
design operating conditions. Not required
if Nameplate HP compliance option chosen. Compliance Message:
"
Brake Horsepower Allowance Adjustments
Device Type
Description and Location
CFM thorough this
device (CFMD)
Assigned Pressure'
Drop, PD in w.c.
(Note 6)
Calculated
Pressure Drop,
PD in w.c.
(Note 7)
Adjustment,
A in bhp
(Note 8)
•
Note 4 - Bhp allowance for energy recovery devices and run around coil loops includes both air Total Adjustment (bhp):
streams, so the CFMD is the sum of the suooly CFM and exhaust CFM if hath9 o throw t,
the device.
Note 5 - Energy recovery effectiveness is defined as change in the enthalpy of the outdoor air supply
divided by the enthaply difference between the outdoor air and retum air at design conditions.
Note 6 - Assigned pressure drop (PD) adjustment per Table C403.2.11.1(2).
Note 7 - Pressure drop (PD) adjustment shall be calculated per the applicable method
defined in Table C403.2.11.1(2) based on specific system conditions.
Note 8 - A = PD • CFMD/4131 where A is the allowed system brake horse power
adjustment, PD is pressure drop allowance, and CFMD is the cfm through the device.
2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1
General Instructions:
A. Include all fans directly associated with the delivery and removal of conditioned air to the zones served by the system. Enter CFM and brake
horsepower (bhp) of each fan at peak design conditions and the nameplate horsepower (hp). Include supply, return and relief fans, exhaust
and exhaust hood fans (>1 hp), booster fans and fans included as part of make-up air units, dedicated outside air systems (DOAS), energy
recovery ventilators (ERV), and series fan -powered terminal equipment.
B. VAV parallel fan powered terminals and economizer relief fans do not need to be included if the fans do not operate at peak conditions.
C. Fans not directly associated with the delivery and removal of conditioned air, such as condenser fans, do not need to be included in the fan
power total.
D. Fan power calculations are not required for non -central air HVAC systems such as 4 -pipe fan coils and variable refrigerant flow (VRF) systems
unless individual fan systems are greater than 5hp.
E. In the Brake Horsepower Allowance Adjustments table, if a Device Type is selected that has an Assigned Pressure Drop, this value will autofill
into the Assigned Pressure Drop cell and the Calculated Pressure Drop cell will be write -protected. If the Device Type requires a Calculated
Pressure Drop, then enter this value into the Calculated Pressure Drop cell and the Assigned Pressure Drop cell with be write protected.
F. Refer to FAQ section of MECH-FANSYS-DOC for additional instructions.
Fan lower Allowance Adjustment Factors
2015 Washington State Energy Code Compliance Forms for Commercial Buildings including R2 & R3 over 3 stories and all R1
MECH-FANSYS-DOC
2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1
Revised January 2017
TABLE C403.2.11.1(2)
FAN POWER LIMITATION PRESSURE D
Device
Adjustment
Credits
Fully ducted return and/or exhaust air systems
0.5 inch w.c. (2.15 inches w.c. for laboratory and vivarium systems)
Return and/or exhaust air flow control devices
0.5 inch w.c.
Exhaust filters, scrubbers, or other exhaust treatment
The pressure drop of device calculated at fan system design condition
Particulate filtration credit: MERV 9 - 12
0.5 inch w.c.
Particulate filtration credit: MERV 13 - 15
0.9 inch w.c.
Particulate filtration credit: MERV 16 and greater and electronically
enhanced filters
Pressure drop calculated at 2x clean filter pressure drop at fan system
design condition
Carbon and other gas -phase air cleaners
Clean filter pressure drop at fan system design condition
Biosafety cabinet
Pressure drop of device at fan system design condition
Energy recovery device, other than coil runaround loop
(2.2 x energy recovery effectiveness) — 0.5 inch w.c. for each airstream
Coil runaround loop
0.6 inch w.c. for each airstream
Evaporative humidifier/cooler in series with another cooling coil
Pressure drop of device at fan system design conditions
Sound attenuation section (fans serving spaces with design background
noise goals below NC35)
0.15 inch w.c.
Exhaust system serving fume hoods
0.35 inch w.c.
Laboratory and vivarium exhaust systems in high-rise buildings
0.25 inch w.c./100 feet of vertical duct exceeding 75 feet
Deductions
Systems without central cooling device
-0.5 inch w.c.
Systems without central heating device
-0.3 inch w.c.
Systems with central electric resistance heat
-0.2 inch w.c.
...— W dL 1 l:u1LLL1II.
For SI: 1 inch w.c..= 249 Pa, 1 inch .= 25.4 mm.
2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1
Design Load Calculation Summary MECH-LOAD-CALC
2015 Washington State Energy Code Compliance Forms for Commercial Buildings including R2 & R3 over 3 stories and all RRevised January 2017
Project Title: Fill this line out on MECH-SUM
Date 1/1/2015
The following information shall be included in the Toad calculation program summary submitted with
the permit documents. If a load calculation summary is not available, provide the required information
below.
For Building Dept. Use
Equip. ID
Area(s) Served
Heating Design Cooling Design
Load in Btu/h (Note Load in Btu/h (Note
1) 1)
Calculation Method
(Note 2) 4
Notes
Note 1 - Design load shall account for the building envelope, lighting, ventilation and occupancy loads of the space(s) served by the
mechanical system. Heating and cooling loads shall be adjusted to account for load reduction achieved by an energy recovery
system, if applicable.
Note 2 - Computer load calculation program, worksheet (identify source), or equivalent computation procedure in accordance with ASHRAE
Standard 183.
l�C
Table GD -2 — General Data
General
Data
TRANEe
(5 - 6 Tons)
Standard Efficiency
YSC060A1
Cooling Performance
Gross Cooling Capacity 63,100
SEER,EER2 9.90/—
Nominal CFM / ARI Rated CFM 2,000/2,000
ARI Net Cooling Capacity 60,000
Integrated Part LoadValue' —
System Power (KW) 6.86
Heating Performance
Heating Models lav Medium High law Medium's
Figh law Medium'a High
Heating Input (Btu) 60,000 80,000 130,000 60,000 80,000 130,000 80,000 120,000 150,000
Heating Output (Btu) 47,000 63,000 103,000 48,000 64,000 104,000 64,800 97,200 121,500
AFUE%5 81 81 80 81 81 80 81 81 81
Steady State Efficiency (%) 81 81 80 81 81 80 81 81 ' 81
No. Bumers 2 2 3 2 2 3 2 3 3
No. Stages 1 1 1 1 1 1 1 1 2
Gas Supply Line Pressure
Natural (minimum/maximum) 4.5/14.0 4.5/14.0 4.5/14.0
LP (minimum/maximum) 10.0/14.0 10.0/14.0 10.0/14.0
Gas Connection Pipe Size (in.) 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 3/4
Comp/ YPe r
5Ton Convertible
YSC060A3, A4, AW, AK
63,100
10.20/-
2,000/2,000
60,000
6.78
6Ton Convertible
YSC072A3, A4, AW, AK
72,000
—/10.212
2,400/2,100
69,000
6.77
1/Scroll 1/Scroll 1/Scroll
Outdoor Sound Rating (dB)8 84 84 88
Outdoor Coil -Type Lanced Lanced Lanced
Tube Size (in.) OD 03125 0.3125 0.3125
Face Area (sq ft) 8.81 8.81 13.88
Rows/FPI 2/17 2/17 2/17
indoor Coil -Type Lanced Lanced Lanced
Tube Size (in.) 0.3125 0.3125 0.3125
Face Area (sq ft) 5.00 5.00 9.89
Rows/FPI 3/16 3/16 2/16
Refrigerant Control Short Orifice Short Orifice Short Orifice
Drain Connection No/Size (in.) 1/V4 NPT 1/3/4 NPT 1/3/4 NPT
Outdoor Fan -Type Propeller Propeller Propeller
No. Used/Diameter (in.) 1/22 1/22 1/26
DriveType/No. Speeds Direct/1 Direct/1
Direct/1
CFM 3,470 3,470
No. Motors/HP 1/0.33 1/0.3315 6,1004
1,075
Motor RPM 1075 11 70
1,075
Direct Drive indoor Fan -Type FC Centrifugal FC Centrifugal WA
No. Used/Diameter (in.) 1/11 x 118 1/11 x 118 WA
DriveType'No. Speeds Direct/2 Direct/2
No. Motors 1 N/A
1 N/A
Motor HP (Standard/Oversized) 0.90/1.00 0.90/1.0016 N/A
Motor RPM (Standard/Oversized) 985/1,0809 985/1,0809 WA
Motor Frame Size (Standard/Oversized) 48/48 48/48 N/A
REVIEWED FOR
CODE COMPLIANCE
APPROVED
AN 3 0 2011
City of Tukwila
BUILDING DIVISION
FITPRC006-EN
oioq
RECEIVED
CITY OF TUKWILA
AUG 112017
PERMIT CENTER
17
General
Data
(5 - 6 Tons)
Standard Efficiency
Table GD -2 — Continued
5Ton Convertible
YSC06OA1
rYSC06073- A4, AW, AK
'FC Centrifugal
1/11 x 11
BeltNariable Sheave
1
1.00/-
1,750/ —
48/-
6Ton Convertible
YSc072A3, A4, AW, AK
Belt Drive Indoor Fan -Type FC Centrifugal
No. Used/Diameter (in.) — 1/12 x 12
DriveTypeMo. Speeds — Belt/Variable Sheave
No. Motors _ 1
Motor HP (Standard/Oversized) — 1.00/2.00"
Motor RPM (Standard/Oversized) — 1,750/1,750
Motor Frame Size (Standard/Oversized) — 56/56
Filters -Type Furnished 1' Throwaway Throwaway
(No.) Size Recommended (2) 20 x 25 10 (2 20 x 10 Throwaway
Refrigerant Charge (Lbs of R-2217 4.7 14) 16 x 25 x 2
49 71
Notes:
1. Cooling Performance is rated at 95 F ambient, B0 F entering dry bulb, 67 F entering wet bulb. Gross capacity does not include the effect of fan motor heat: ARI capacity is net and includes
the effect of fan motor heat. Units are suitable for operation to o20% of nominal cfm. Units are certified in accordance with the Unitary Air -Conditioner Equipment certification program,
which is based on ARI Standard 210/240 except AK (380V/60 Hz) units.
2. EER and/or SEER are rated at ARI conditions and in accordance with DOE test procedures.
3. Integrated Part Load Value is rated in accordance with ARI Standard 210/240 or 360. Units are rated at 80° F ambient, B0° F entering dry bulb, and 67° F entering wet bulb at ARI rated cfm.
4. Heating Performance limit settings and rating data were established and approved under laboratory test conditions using American National Standards Institute standards.
Ratings shown are for elevations up to 2000 feet. For elevations above 2000 feet, ratings should be reduced at the rate of 4% for each 1000 feet above sea level.
5. AFUE is rated in accordance with DOE test procedures.
6. Outdoor Sound Rating shown is tested in accordance with ARI Standard 270. For additional information refer to Table PD -90.
7. Refrigerant charge is an approximate value. For a more precise value, see unit nameplate and service instructions.
8. YSC060A1,3,4,W Oversized Motor and YSC060AK Standard Motor Fan Diameter is 12 x 11.
9. Motor RPM shown is low speed. High speed RPM is 1100/1135.
10. Filter size shown is for low and medium heat models. High heat model filter size recommended is 20 x 30 x 1.
11. Optional 2" pleated filters also available.
12. YSC072A when used in a horizontal application has an EER of 10.1 and System Power (kW) of 6.83.
13. Medium heat is not available for AK (380V/60 Hz) units.
14. Outdoor motor is 0.75 hp for AK (380V/60 Hz) units.
15. Outdoor motor is 0.40 hp for AK (380V/60 Hz) units.
16. Standard Motor is 1.00 hp for YSCO60AK (380V/60 Hz) units.
17. Standard Motor is 2.00 hp for the YSC072AK (380V/60 Hz) units.
18
RT-PRC006-EN
Weights
Table W-1 — Maximum Unit And Comer Weights (Lbs) And Center Of Gravity Dimensions (In.)
Unit Maximum Weights (Lbs)2 ComerWeights (Lbs)' Center of Gravity (In.)
Tons Model No. Shipping Net A B C D Length Width
3 YSC036A 572 480 151 124 96 109 32 19
`11-1CO36A 589 497 158 128 101 110 32 19
4 YSC048A 5.97 505 199 130 108 109 33 19
YHC048A 631 539 166 133 114 126 32 20
— A 614 4` 522 169 134 105 114 32 18
<_--'� YHC060A 666 ` 574 179 140 719 136 32 20
6 YSC072A 878 735 249 193 132 161 39 21
A 915 772 249 193 141 184 39 22
A 963 820 273 208 146 193 38 22
71/2 YSC092A 965 822 277 222 147 175 40 21
A 1066 923 306 243 165 210 39 22
81/2 YSC102A 1042 893 297 243 165 191 40 21
YHC102A 1100 957 310 252 175 220 40 22
10 YSC120A 1063 958 317 261 177 202 41 21
YHC120A 1203 1060 342 277 197 245 40 22
Notes:
1. Corner weights are given for information only.
2. Weights are approximate.
94
CENTER OF GRAVITY
.•—..-- LENGTH
CENTER OF
GRAVITY
WIDTH
D
CENTER OF GRAVITY
Table W,2 — Factory -installed Options I!et Weights (Lbs)t-2
Accessory
Economizer
Net Weight
3-5Tons 6-10Torts
26ai 36
Barometric Relief 7' - 10
Powered Exhaust _ 80
Motorized Outside Air Damper 20 f 30
Manual Outside Air Damper 16 26
Roof Curb
Oversized Motor
70 115
5 8
Belt Drive Motor 31
Smoke Detector, Return 7 7
Smoke Detector, Supply
Coil Guards
5 5
12 20
Hinged Doors 10 12
Powered Convenience Outlet 38 38
Through the Base Electrical 8 13
Through the Base Gas 5 5
Unit Mounted Circuit Breaker _5.._ 5
Unit Mounted Disconnect e...... 5--F.,- 5
Novar Control 8 8
Dehumidification (Hot Gas Reheat) Coil 15 25
Notes:
1. Weights for options not listed are < 5 Ibs.
2.Net weight should be added to unit weight when ordering factory -installed accessories.
RTPR0006•EN
REVIEWED FOR
CODE COMPLIANCE
APPROVED
AN 3 0 2011
City of Tukwila
BUILDING. DIVISION
CCarrier
United Technologies
SUBMITTAL
Project
Parkway Village
Date
Tuesday, July 18, 2017
Contractor
Seattle Mechanical
0109
RECEIVED
CITY OF TUKWILA
AUG 112011
PERMIT CENTER
5t Unit
Project: Parkway Village
Prepared By:
07/18/2017
07:42AM
Packaged Rooftop Builder 1.49
5t Unit
Tag Cover Sheet
Unit Report
Certified Drawing
Performance Report
Unit Feature Sheet
Spec Sheet
Page 2 of 14
Project: Parkway Village
Prepared By:
Unit Report For 5t Unit
07/18/2017
07:42AM
Unit Parameters
Unit Model. 50KCQA06A2A5-0A0A0
Unit Size. 06 (5 Tons)
Volts -Phase -Hertz 208-3-60
Dimensions (ft. in.) & Weight (lb.)***
Unit Length. 6' 2.375"
Unit Width 3' 10.75"
Unit Height 3' 5.375"
Heating Type. Heat Pump *•* Total Operating Weight 660 Ib
Duct Cfg. Vertical Supply / Vertical Return
Standard One -Stage Cooling Refrigeration Coil
Lines and Filters
Return Air Filter Type. Throwaway
Return Air Filter Quantity• 4
Return Air Filter Size• 16 x 16 x 2
Unit Configuration
Medium Static Option Belt Drive
AI/Cu - AI/Cu
Base Electromechanical Controls
Standard Packaging
Warranty. Information
5 -Year electric heaters (STD.)
1 -Year parts (STD.)
5 -Year Compressor (std.)
No optional warranties were selected.
*" Weights and Dimensions are approximate. Weight does
not include unit packaging. Approximate dimensions are
provided primarily for shipping purposes. For exact
dimensions and weights, refer to appropriate product
data catalog.
NOTE: Please see Warranty Catalog 500-089 for explanation of policies and ordering methods.
Ordering Information
Part Number
Description
Quantity
50KCQA06A2A5-0A0A0
Rooftop Unit
1
Base Unit
Medium Static Option Belt Drive
None
Accessories
CRECOMZR067A01
Ultra LOW LEAK - Vertical EconoMi$er X with solid-state W7220
controller
1
CRHEATER104B00
7.9/9.6/10.5 kW 208/230/240-1/3-60 Volt Electric Heater
2
CRSINGLE039A00
Single Point Kit
1
Packaged Rooftop Builder 1.49
Page 3 of 14
Project: Parkway Village
Prepared By:
Certified Drawing for 5t Unit
07/18/2017
07:42AM
101(5:
1. 0360041083 nE 11 101X(5 0131990031
58 1 1 63( 13 6141(1111(5.
1. 0(611 OF 0630(0
3. *, 013(11104 Or 419 (109
4. —Ej • ALL 3109 DOA woo 3RD 49GM
DRAWING REPRESENTS PRODUCT BUILT AFTER 01/01/2017
(STARTING WITH SERIAL NUMBER 0117...) SEE DETAIL "E"
anger
1 4u a t ale�""ir a'iu n
041 i4nt.Marterrov nem
4098017109 SIMS
3 311. 1131 019 FIELD PORI 32PPL1 ROSE
2. 1703 DIA 308ER SUPPLY IIgIWT
314. 1511 513 DIME 3CRn RW
213. 0221 DIA FIELD 001102 (18133 1(0.0
311'-11 IPT COMEIn1E 5MA13
2 I/O • 1611 IIA 0131E5 SUPPLY 3110[8-001
1683-rR-0081 CRAM
18010 ZEUS 10331809 FOR USE
43510330431691.
11(1813
1111
300'8 1410
(OMIT SIR
USE
513(3 1110.1
r
112•
151
113• 122.11
I
111•
143
116. 121.11
S
311•
PRIER
1-11.128.3
f0(3T101S1i0R8061Y01• 0 03 o0
ED
ME
ME 11110 FIE
MSE 04381
SEE DETAIL E
141(1 S
•
11351
TOP
-SAI 3
1
1113.41
LEFT
Packaged Rooftop Builder 1.49
14 40630131181133 I 04041
U.S. ECCN:NS5 1 OF 3
0314 noecCDE3 50610 0I-06 SINGLE ZONEELECTRIC 300
6-24-2016 19 -IT -2014 I BEAT PUMP I /6X4000263 I A
Page 4 of 14
Project: Parkway Village •
Prepared By:
Certified Drawing for 5t Unit
07/18/2017
07:42AM
80(13:
1. 8 318(/118/AK (8 117183 0188857045
le 1 1 887 I8 e1LL(I(1ES5.
I. (e (8M8(8 Of 80037!
3. MO, (memo Or Aro row
*.—E4 611 91CA 01181 11110 380 AILS
78)3
53!60.01
13 118
18111
11 ll6
11117
!01000.05
Al 318
111511
lib
13111
500(0.01
*1 Ile
11031)
f1 10
Inn
A]CCe W 91X01
1133
608E**
BACN 2-31e Inns
[151
119
,111
I3TR
g eu'I1lVIlA[k118886!b*eiv'lp
10A111nrt rrr���ea
DRAWING REPRESENTS PRODUCT BUILT BEFORE 01/01/2017
SEE DETAIL "B"
' ECW01171t 8007
08(74411
`�--- 25 ale
8(111811116.
(MDEISER.
cot(• IMnWAO
3171081
[O•
W[00311 7
^ I
.�1
I1 II1
[7)87)
LEFT
Packaged Rooftop Builder 1.49
E�e
1 I1
16128 Leu 11-111 I I
11541 I [363)
) — 4103
11311 �.
32 Ill —..
16131
6[E MAIL 8
MI 5
1\
9
EALT.—
08Aj 0838111886
10 863E00
TOP
6.1)1
111)1
x
1101)
1
4.11
1 -Ile
(0112 1161111
I 1 K1le
11-]11 11111
141]
AI* [1131 818
3418
7831
7'118
111311871)
0048(71(08 312ES
A
1 Ile• 1351 016 3(110 POIFI 1U1PLP MOLE
0' 1301 OIA 511[8 8U7911 1148001
1 III. 1311 016 00(18 463E63 9100
Ile• (221 DIA FIELD CO4T0L 511(83 80.E
311•-11 MPT CO80E8*A1E 08AI8
0 70 • 111] DIA 908(8 !WILY 5110C11-001
11(67
1318-I11E7115[ C36*1
80113 808168(0 708 (5E
08111/1/02201
(58(3KR 1(03
837
61733 POLE
WIWI
•
1)'
1132
7)6' 1]].21
4
110•
243
716' 122.01
! •
371•
POWER
1 118' 788.86
706 •111(-111-883[88' 7![108! 091108,
71711803 103 0411 6,! KC 3300(3(0
•
!ELECT 311X1! 31*• 08 7)7•
738
88878, 0(1780183 18 8311 337E
311 *
888rty 011!
*I8 ; :17.„„
RIGHT
ITC cu11(im 1134 s8ttr 0*14 80"3"."80"3"."U.S. ECC*:RSR - I 2 OF 5 5-21-8015 1 3-17-1011 I 508[0 01-06 NFA( PU PpIE ELECTRIC I 16X000018) I RAv
Page 5 of 14
Project: Parkway \tiIlage
Prepared By:
Certified Drawing for 5t Unit
07/18/2017
07:42AM
PITT
410.
00(401
LA3,
UNIT
56.
COe0ER
001671
Lee.
lel
Re.
C00*13
171001
053.
lei
k6.
C01000
1111611T
155,
ICI
0*.
coni(*
0E1031
Lee.
10)
k0.
C,6,
I
I
WEIGHT
t
)0100)01
405
714
lee
31
110
51
Ile
33
130
33
35 ere 103113
73 ere 6913
le )re (7111
503(0103
$10
753
161
53
577
69
110
59
147
ee
35 172 11071
11 118 15501
20 171 15111
503(0101
110
714
160
13
1)1
el
111
61
132
et
35 era Ilett
40 4,2 (5111
20 are 15711
Id1A 0430 (*1T 01(697 (5 1(1140? 111073(6 9 1 400 *(104011 *56075300.
p 0120 1511033 * 7 u6E1509(03. 0060 10 71E *500061 0*13 611700
CORNER A
CORNER 0
TOP
OP
Ikill
Moo I 1 I I . 00E -
Packaged Rooftop Builder 1.49
FRONT
CORNER 8
CORNER C
ITR 011*13PE0*Tim
U.S. ECCR:RSR
.rmums 111,/ mm memo ge no mom colun "TOMpirja=“'
11rr
trte_.. �..
BACK_.--_
WITH ECONOMIZER
RI? 114
111111
BACK
KIT OUT
ECONOMIZER
LEFT
0ni13O0170*.AL DOOR
1) 0700 4000
l �
51• -
FRONT l'
001[6:
1. F0* ALL 7111190 CLI43*06ES LOCAL 00063 OR 100150161(005 RAI PREVAIL.
11.16112
MONT
LOFT
!MS MOOD
WSW
Ta
SNER DA E 300(36(OC3
3 OF 5 6-24-2016 9-17-2014
IMINIZ
CLENVIICE
CCIOICIIRE WIRER
48 (121955]
48 (1319035]
48 (1219031
36 (9141ni)
36 (914031
12 11829031
80IRCE VTR
9OWOUCIM MRI881
36 (614031
42 (1061031
42 (1067031
36 (914031
36 (914031
72 (182903]
506C0 04-06 6111GLE 009E ELECTRIC
RFC PUMP
Page 6 of 14
Project: Parkway Village
Prepared By:
Certified Drawing for 5t Unit
07/18/2017
07:42AM
••••••••••MSIIMI E14 X11.fga.N RO [MP
[11![1,5154[ Ei �p Mt�P��
�i;mt a i�4ii:c7'"'
,111516F TIE SASESjl1F 1 SKIM
.
.ACCESS
1
IPOOOI COIL
ACCESS PAPA
41
t MIK TAE
0
0
/
INSIDE BASERAIL DIMENSIONS
BOTTOM
11
CIO,
w6a
IILTFI ACCF# MNFI
ITOOliI5S1
.
.ACCESS
`
COIL COIL
IPOOOI COIL
ACCESS PAPA
bi fr r_C-IT-rloa4
Packaged Rooftop Builder 1.49
BACK
LEFT
STC CLASSItICATIOP I SREET
U.S. ECCS:NSR 4 OF S
�[E OMR C
0-IS/0i5/11CA]
r-- TTI COR!
1116111
O111 AAPINC10FI HALO 04-06 SINGLE ZONE ELECTRIC
I-24-2016 I 9-11-1014 NEAT PUMP
ISI
485E000253A
Page 7of14
Project: Parkway Village
Prepared By:
Certified Drawing for 5t Unit
07/18/2017
07:42AM
0100 -TOE -OA E OW
11•50
11F50 lass REWIRED Fa USE
CPoTW12001231
12205[0
•IRs
Afro 100E
C 000T SIRE
Rs
SIDES 1141.1
•
111'
1101,
1I6' 121.21
2
t/1'
142
T/5. 122.21
I •
S/A'
NKR
1 115' 020.10
EOR 'mo-TBE-0/SE Ar r1[Tas MT101,
FIT1I1115 120 ORIS S,I A5E 52000202
'
• SELECT EITIE5 311. OR 1/2'
FOR 50155, OEPER0250 OR 520E 5001
II
OCTAD 8
riamut
I
------------------------------'-----I
4125
Ub 4 MIRA Il 1.141 ot11.."b,
�ti,RAA• [f 31111 nRN dtlin P,0 m,mf".""
1d,b�b 1Cbk Mmbll aMe�iil m
a991br 4�
THEM DOLES NEWIRED FW 435E
CI112MR041A21
133042(0
111E
200'2 5012
COMMIT SIM
051
SIZES 1144.1
1IV
1155
Ill' (12.20
1
I53'
lir
Ile 222.21
343•
00105
1-14.126.41
F0A 'T11I-TIE-SASF113' r [TOR, 0TI01,
111114,65 105 ONLY 1, t AME 51On0E0
•
1034412
I11•tn1p mile
II502310
I
1
!
I 21 25 ..,
3051
gun E
Ma 51[22
21 25-311
25531
THIS VIEW REPRESENTS PRODUCT BUILT PRIOR TO 1/1/17 THIS VIEW REPRESENTS PRODUCT BUILT AFTER 1/1/17
Packaged Rooftop Builder 1.49
ITC cLAs0IIICAT1OA
U.S. (CMOS
sun
50F 5
- GAT2
0-24-2016
5n40E(1,
05-11-2011
502(0 04-06 SINGLE ZONE ELECTRIC
HEAT PUB,
18X(000283
etv
A
Page 8of14
Project: Parkway Village. 07/18/2017
Prepared By: 07:42AM
Certified Drawing for 5t Unit
Packaged Rooftop Builder 1.49 Page 9 of 14
Service
aearance
caro,
LOCATION
DIMENSION
CONDITION
4881 (1219 mer)
• IMM disconnect Is mourned on peel
A
18.4 (457 mm)
• Mp disconnect. convenience outlet option
• Recommended servkedearame
124n (SOS . )
• Mei/morn durance
424n (1667 mm)
•arbce behind seodeerb grounded (e.g., metal, mammy we)
8
3681(914 mon)
•5urbce blend ser9cer6 elect 1l 0y non-conductive (e.g.,wood. fiberglass)
Special
*Check tor sources at the products within la ft. or unit freshen Into* Ifo
C
868n (91e mm)
• Side condensate drain Is used
18.1n (457 mm)
• Mhemwn deem=
4888(1219818)
• No flue dlsdiarge =more Installed. surtece8 combustible materiel
42811/6788)
• Surface behind seeker 4gmurded e.g..metal.maswoywall, another unit)
0
3681 4181)
• 4atece behind senate.. 4 ehctrkagy nan-cmrdolle (e.g.. wood. fiberglass)
Specie]
•Checker adgoemudo or building freshetalahes within SO Ot's
. of this min
gine outlet
MOTE: Shift rot designed to have overhead obstruction. Co0sal Application Engineering for guldecean any
appgcaton planning overheadobstructko or vertical deermes.
omni 43
Packaged Rooftop Builder 1.49 Page 9 of 14
Project: Parkway Village
Prepared By:
Performance Summary For 5t Unit
07/18/2017
07:42AM
Part Number:5OKCQAO6A2A5-0A0A0
ARI SEER. 14.30
Base Unit Dimensions
Unit Length.
74.4 in
Unit Width _._ 46.8 in
Unit Height 41.4 in
Operating Weight
Base Unit Weight 610 Ib
Medium Static Option Belt Drive. 10 Ib
Accessories
7.9/9.6/10.5 kW 208/230/240-1/3-60 Volt Electric Heater 30 Ib
Single Point Kit 10 Ib
Total Operating Weight 660 Ib
Unit
Unit Voltage -Phase -Hertz. 208-3-60
Air Discharge. Vertical
Fan Drive Type- Belt
Actual Airflow. 2000 CFM
Site Altitude. 0 ft
Cooling Performance
Condenser Entering Air DB. 95.0 F
Evaporator Entering Air DB. 80.0 F
Evaporator Entering Air WB. 67.0 F
Entering Air Enthalpy 31.44 BTU/Ib
Evaporator Leaving Air DB- 60.0 F
Evaporator Leaving Air WB• 58.1 F
Evaporator Leaving Air Enthalpy 25.12 BTU/Ib
Gross Cooling Capacity 56.83 MBH
Gross Sensible Capacity- 43.20 MBH
Compressor Power Input 4.79 kW
Coil Bypass Factor 0.156
Heating : Performance
Outdoor Ambient Temperature. 47.0 F
Entering Air Indoor Coil DB. 70.0 F
Leaving Air Indoor. Coil DB• 95.9 F
Total Heating Capacity. 55.90 MBH
Integrated Heating Capacity 55.90 MBH
Heating Power Input 4.07 kW
HSPF. 8.2
Electric Heating Capacity 15.80 kW
Unit Leaving Air Temp. 120.8 F
Supply Fan
External Static Pressure. 10.50 in wg
Options / Accessories Static Pressure
Electric Heaters- :0.17 in wg
Total Application Static (ESP + Unit Opts/Acc.) 0.67 in wg
Fan RPM. 1182
Fan Power 1.22 BHP
NOTE. Selected IFM RPM Range: 1066 -1380
Electrical Data
Voltage Range. 187.253
Compressor #1 RLA• 15.9
Packaged Rooftop Builder 1.49 Page 10 of 14
Project: Parkway Village
Prepared By:
Performance Summary For 5t Unit
07/18/2017
07:42AM
Compressor #1 LRA. 110
Actual Electric Heater kW 15.8
Electric Heater FLA. 43.8
Outdoor Fan Motor Qty• 1
Outdoor Fan FLA (ea). . 1.4
Indoor Fan Motor Type MED
Indoor Fan Motor FLA. 8.4
Power Supply MCA. 85
Power Supply MOCP (Fuse or HACR). 90
Disconnect Size FLA. 80
273
Electrical Convenience Outlet None
Electric Heater Number of Stages' 2
Control Panel SCCR: 5kA RMS at Rated Symmetrical Voltage
Disconnect Size LRA.
Acoustics
Sound Power Levels, db re 10E-12 Watts
Discharge Inlet Outdoor
63 Hz 88.5 88.0 57.7
125 Hz 81.7 78.4 66.6
250 Hz 74.2 66.4 68.7
500 Hz 71.7 64.4 72.9
1000 Hz 70.9 66.0 74.5
2000 Hz 65.8 60.6 71.1
4000 Hz 67.5 56.7 67.6
8000 Hz 64.1 49.8 62.6
A -Weighted 76.3 70.5 79.0
Advanced Acoustics
Advanced Accoustics Parameters
1. Unit height above ground. 30.0 ft
2. Horizontal distance from unit to receiver 50.0 ft
3. Receiver height above ground. 5.7 ft
4. Height of obstruction. 0.0 ft
5. Horizontal distance from obstruction to receiver 0.0 ft
6. Horizontal distance from unit to obstruction. 0.0 ft
Detailed Acoustics Information
Octave Band Center Freq. Hz
63
125
250
500
1k
2k
4k
8k
Overall
A
57.7
66.6
68.7
72.9
74.5
71.1
67.6
62.6
79.1 Lw
Packaged Rooftop Builder 1.49 Page 11 of 14
Project: Parkway Village
Prepared By:
Performance Summary For 5t Unit
07/18/2017
07:42AM
B
31.5
50.5
60.1
69.7
74.5
72.3
68.6
61.5
78.1 LwA
C
25.3
34.2
36.3
40.5
42.1
38.7
35.2
30.2
D
-0.9
18.1
27.7
37.3
42.1
39.9
36.2
29.1
Legend
A Sound Power Levels at Units Acoustic Center, Lw
B A -Weighted Sound Power Levels at Units Acoustic Center, LwA
C Sound Pressure Levels at Specific Distance from Unit, Lp
D A -Weighted Sound Pressure Levels at Specific Distance from Unit, LpA
46.7 Lp
45.7 LpA
Calculation methods used in this program are pattemed after the ASHRAE Guide; other ASHRAE Publications and the AHRI
Acoustical Standards. While a very significant effort has been made to insure the technical accuracy of this program, it is assumed
that the user is knowledgeable in the art of system sound estimation and is aware of the tolerances involved in real world acoustical
estimation. This program makes certain assumptions as to the dominant sound sources and sound paths which may not always be
appropriate to the real system being estimated. Because of this, no assurances can be offered that this software will always generate
an accurate sound prediction from user supplied input data. If in doubt about the estimation of expected sound levels in a space, an
Acoustical Engineer or a person with sound prediction expertise should be consulted.
FanCurve
18
-150C.RPM
71
17Q73i..
-11M
16
3.00BFF
1.504P
1,OOBFP
13 C6 09 12 15
Airflow(CFM-1 usands)
RPM= 1182 BHP= 122 MaximumRPM=2100 MaxnmunBHP=2.90
Note: Pleasecontactapplicxdonengineeringforselectionsoutsidetheshadedregion.
SC-SystemCurve RP-RatedPoint
21 24 27
Packaged Rooftop Builder 1.49 Page 12 of 14
Project: Parkway Village
Prepared By:
Unit Feature Sheet for 5t Unit
07/18/2017
07:42AM
WeatherMakef - 50KCQ
PACKAGED ROOFTOP NEAT PUMP UNITS -14 SEER
WEATHERMAKER SERIES
WeatherMaker 501=1 (14 SEER) units are single -packaged
heat pump units that are prewired and charged with Puron
(R -410x) refrigerant The units are factory tested and rated in
accordance with AHRI Standard 2101240. Wert herMakerunits
are designed in accordance with UL Standard 1995, and listed
by the Underwriters' Laboratories.
Puron
C[RkiFED.
Ulf a the MN artaea
moteAnvitee
nSo
Miran Far yemhoeisn
elorttd••rMrrrax4•
mama WM
•rni'+*arvs,
Cerdfled to .ISO 9001
4,5TONS
PERFORMANCE FEATURES
• .PURON (R -410A) HFC refrigerant
• Meets and exceedsASHRAE90.1eneegyetfa ancylevets
• SEERsupto 14.4.EERsupto12.2..ISSPi^s up to 8.0
• Single stage wan capacity control
• Exclusive noncorrosive composite condensate pan in accordance Pith
ASIatAE 62 Standard. sloping design: side orcenterdrain
• Coppertube aluminum fn cols with optional corrosion resistant coil
• Pre -painted exteriorpanelsand p +erooatedite1iorpanelstestedto
500 hours salt spray protection
• AcutroFTM refrigerant metering system
• Cooling operating range upto 115F (40C) and down to 25 F (-4C)
• Sodxtatecontrol board and easy access terminal board
• Refit grant filter drier and accumulatoroneach refterantotouit
• Fully insulated cabinet
• Automatic used with a utotfnengeoverthemrostat
• ;Rated in accordance wth AHRI Standards 240
• Loss of charge. freeze protection. and hih yresare watches
• Dependable Time fTerrparature defrost board and logic
• Listed twit. and UL. Canada
MAINTENANCE FEATURES:
• Accerapsr:akath easy grip handles
• lnnovatim, easy starting. no strip screw features en unt access pants.
• Tav-inch disposable return skitters
• Tool -less fitter
• ,Obeid Drive —ECM indoormotor is standard with optional b&t drive
systems
• Terminal board far:Mating simple safety6sarit trovbleshoofsng and.
simplified controtboxarrangement
INSTALLATION FEATURES:
• Thnr-0he-bottompowerertryospablitystandard
• Single point ekataiccennectcns
• Pull perimeter hese nalwihbullar rigging adapters and fork truck slots
• 'Meld convertible from vertical to horizontatairrbw
STANDARD WARRANTY:
• 8-yearelectric heaters
• 5-yearconpresaor
• 1-yearparls
Many aptionaiwanantiesatso available
OPTIONS INCLUDE BUT ARE NOT LIMITED TO:
• Premierlink and RTU Open Muni Protocol DDC Controls
• Supptyand Return air smoke detectors
• Non-fused disconnect watch, and convenience outletoptions
• High staticn>otoroptons
• Ow sensor
• Corrosion resistant col options forevaporetorand condenser
• field accessory etectwie heat and single point Ma (field -instated only)
• bunged access panels
• Integrated ewnor izersystem. Standard and L ltra Low Leak versions
Fora complete flat of options and accessories referto the Product Data
Catalog forthis unit.
Packaged Rooftop Builder 1.49 Page 13 of 14
Spec Sheet for 5t Unit
Project: Parkway Village
Prepared By:
07/18/2017
07:42AM
Packaged Rooftop Builder 1.49
Page 14 of 14
REVIEWED FOR
CODE COMPLIANCE
APPROVED
AUG 30 2011
City of Tukwila
BUILDING DIVISION
L
STRUCTURAL
CALCULATIONS
Redwing RTU
17135 Southcenter Parkway
Tukwila, Washington
AUGUST 3, 2017
4..,
SJ ;44
PREPARED FOR:
Seattle Mechanical
899 West Main Street
Auburn, Washington 98001
PREPARED BY:
Moore Engineering Group
21902 96th Avenue SE
7 Snohomish, Washington
RECEIVED
CITY OF TUKWILA
AUG 1 1 2017
PERMIT CENTER
Moore
EYVir'.4rj1LIR 1 Engineering
Group
Mt1oW1
GENERAL STRUCTURAL NOTES:
1. ALL MATERIALS, WORKMANSHIP, DESIGN, AND CONSTRUCTION SHALL CONFORM TO
THESE NOTJS AND THE INTERNATIONAL BUILDING CODE (IBC), 2015 EDITION.
2. DESIGN LOADING CRITERIA:
ROOF LIVE LOAD 25 PSF
MECHANICAL UNIT 920 POUNDS
EARTHQ''UAKE .... SDS = 0.968
SITE CLASS C
WIND l 110 MPH, EXPOSURE B
3. STRUCTURAL CALCULATIONS AND SKETCHES SHALL BE USED IN CONJUNCTION
WITH MEC ANICAL DRAWINGS FOR:BIDDING AND CONSTRUCTION. CONTRACTOR
SHALL VE FY DIMENSIONS AND CONDITIONS FOR COMPATIBILITY AND SHALL
NOTIFY EN SNEER OF ALL DISCREPANCIES PRIOR TO CONSTRUCTION.
4. CONTRACTOR SHALL VERIFY ALL EXISTING DIMENSIONS, MEMBER SIZES AND
CONDITION§ '.PRIOR TO COMMENCING ANY WORK. ALL DIMENSIONS OF EXISTING
CONSTRUCTION SHOWN ARE INTENDED AS GUIDELINES ONLY AND MUST BE
VERIFIED. THE EXISTING CONDITIONS SHOWN ON THE SKETCHES ARE BASED
EITHER ON §ITE OBSERVATION, ORIGINAL DRAWINGS OR WERE ASSUMED BASED ON
EXPECTED t ONDITIONS. IF THE EXISTING CONDITIONS DO NOT CLOSELY MATCH
THE CONDITIONS SHOWN ON THE SKETCHES, OR IF THE EXISTING MATERIALS ARE
OF QUESTIONABLE OR SUBSTANDARD QUALITY, NOTIFY THE ENGINEER :PRIOR TO
COMMENCING ANY WORK.
5. CONTRACTOR SHALL PROVIDE TEMPORARY BRACING FOR THE STRUCTURE AND
STRUCTURAL COMPONENTS UNTIL ALL FINAL CONNECTIONS HAVE BEEN
COMPLETED IN ACCORDANCE WITH THE DRAWINGS.
6. CONTRACT R SHALL BE RESPONSIBLE FOR ALL SAFETY PRECAUTIONS AND THE
METHODS, CHNIQUES, SEQUENCES OR PROCEDURES REQUIRED FOR TI -TE
COMPLETION OF THE WORK.
7. SHEET M.ETIA.L SCREWS SHALL CONFORM TO THE AMERICAN IRON AND STEEL
INSTITUTE (AISI) "SPECIFICATIONS FOR THE DESIGN OF COLD -FORMED STEEL
STRUCTURAL MEMBERS".
CONNECT THE UNIT TO THE METAL CURB WITH A :MINIMUM OF (3) #12 SHEET METAL
SCREWS ON EACH SIDE OF THE UNIT. PLACE ONE SCREW AT 6" TO 8" FROM EACH
CORNER O THE UNIT AND THE THIRD SCREW AT APPROXIMATELY THE MIDDLE OF
THE UNIT OWN EACH SIDE.
•
Moore
Engineering
Group
PROJECT:
b\:ts Z V
ENGR: /{,V
DATE: SA/1'7
SCALE: l/
2/9
SHEET
PROTECT DESCRIPTION: The project consists of the replacement of an existing rooftop
mechanical unit.
LOADS: LIVE
DEAD
DEAD + L
WIND
SEISMIC
E
Roofing and re -roof
1/2' plywood sheathing
2x6 @ 24" on -center
4x14 @ 8' on -center
Insulation
MEP
Ceiling & Lights
Total Dead
110 mph, Exposure B
Latitude
Longitude
Site Class
SDS=
EQUIPMENT
Existing RTU -1
Unit 570
Existing C rb 110
Curb Ada ter 150
Total 830 pounds
Dimensio
4.0
1.5
1.1
1.6
1.0
2.0
2.0
13.2
25 PSF
382 PSF
47.451
-122.263
C WA DNR
0.968
New RTU -1
660
110
150
920 pounds
74"x47"x73" high
Moore
Engineering
Group
PROJECT:
REDWING RTU
ENGR: KWM
DATE: 8/3/ 17
SCALE:
SHEET
7/29/2017 Design Maps Summary Report
Design aps Summary Report
User -Specified Input
Report Title Redwing RTU
Sat 3uly 29, 2017 13:55:57 UTC
Building Code Reference Document 2012/2015 international Building Code
(which utilizes USGS hazard data available in 2008)
Site Coo dinates 47.451°N, 122.263°W
Site Soil Class fication Site Class C - "Very Dense Soil and Soft Rock"
Risk ategory I/1I/1I1
1i F1_0114'IICr
own.
,,fir I
` `�� ;� RENTON �
INN
ii +� , I PA4t' . t1
ri�en ; 't=‘. Ilenton
'SEATTLE '` r1 '
11
COMA PiTt : r
AtF?POR ; 4,4';,;''' ••; Maple Valley
Des . oin �) 'fir
if
L
o
Iah
USGS-Provided Output
Ss = 1.452 g
S1 = 0.541 g
s= 1.452g
= 0.703 g
"`zent
•r
ovingtori
•
Sos = 0.968 g
Sol = 0.469 g
•H o�
Cea
For information on how the SS ani. S1 values above have been calculated from probabilistic (risk -targeted) and
deterministic ground motions in the direction of maximum horizontal response, please return to the application and
select the "2009 NEIIRP" building code reference document.
MCEER Response S ectrum
MGI
ago
asp
*xm
0.73 CIL" MI 21.51 :
Pennon. >{ (see)
114 • a; :Aa
Design Response Spectrucn
+0
SI 7J
a
a1°
xl
1:11 an; L. 4(4 11. 173 +_
PeKY1.T (Tae)
•a I+fO _.1,
Although this information is a produc@ of the U.S. Geological Survey, we provide no warranty, expressed or implied, as to the
accuracy of the data contained therei`t. This tool is not a substitute for technical subject -matter knowledge.
https://earthquake.usgs.gov/cn1/designmaps/us/summary.php?template=minimal&latitude=47.451 &longitude-122.263&siteclass=2&riskcategory=0&e,.. 1/1
Weights
Mfg Wi -- Mixmlan Unit Am Coiner (Lis)And Center Ofavvity Dimensions (1nJ
MatdrrlumWeghtsMOO CornerlWight!IWO
1431 A B C
Unit
Torts Mode No.
3 VBA
.—r Yric0604
4
8 YHCW7A
MEGA
71 Y90092A
YHC032A
YSC107A
814
YHC102A
10 Y5C120A
YHC1204
Y5C072A
Center of Gravity (kr.)
1-01/011 Wan
572 M81 151 124 96 109 32 19
5113 487 168 128 .101 110
32 19
1 MU 51b 159 135 108 109 33 19
831 539 1155 133 114 12 3 20
614 ✓ 572 189 134 105 114 32 18
886 574 179 140 119 135 32 20
878 746 249 193 132 151 21
�16 772 249 198 141 164 39 22
963 825 273 ZS 146 193 38 22
966 8221 277 272 147 175 40 21
1066 923 306 243 109 210 39 22
1042 869 237 273 166 191 ,40 21
1100 957 310 252 175 220 40 22
1063 95 317 281 177 202 41 21
1203 1060 342 277 157 245 40 22
NM03:
1. Comer weights era own for Mormetbn
2. Weighte eta approximate..
94
Y•
4--
7 1e W2 — Fectorpletstalied Options Net Miens 11h)i"
Accessory
Economizer
NetWaight
3-5Tons 6.10Tons
7- 28 t 38
Barometric Re9ef 7 4 10
Azweted Exhaust 80
Motormed Oatede Air Damper 20 r 30
Manual Outside Air Damper 16 26
Roof Curb 70 115
Oversized Motor 5 8
Bah Drive Motor 31
Smoke Detector, Raum 7 7
Smoke D Supply 5 5
Cog Guards 12 20
Hinged Doors_ 10 12
RIWINIXI Convenience Outlet 38 38
'Through the Rase Samba 8 13
Through the Bose Gas
Unit Mounted Qr iltBreaker
Unit Mounted Disoonnat
5 5
5 5
5 6
Hover Control 8 8
Oehumldiiicatton Hot Gas Reheat) Cog 13 25
Notes:
/Weights foro Dion not listed ere <5 tbs.
2Netwetghtshautd be edited to unit weidM when orderingteetoryinsteiled accessaries.
RFPR0006 34
General
Data
(5 - 6 Ts
Standard Efficiency
DM, GD2 — Data
Cooing Perforrroros'
Grose Cooling Capacity
SIMMER,
Nominal CFM/ARI Famed CFNI
ARI Nat CooTerm Cegchy
integrated Part LoadVelue'
System Power (KW)
(feeds* Perbrn anee*
Heating Media
Heating Input (btu)
ItoeNng Ou8ax (Btu)
ARJlxiba
Steady State Efficiency (%l
No. Burners
0/0. Stages
Gas Supply Line Pressure
Natural (Wetmore/maximum)
tP (minimnanhnmdmum)
Gas Connection Pipe Size (ln.)
Compressor
Outdoor Sound Rating (dBP
Outdoor Coll -Type
Tube Star 6n) OD
Face Area (as RI
Rows/FPI
Moor Call Type
TUbe Sit (in.l
Face Area (sq ft)
RoweFR
Refrigerant Control
Drain Cormacijon No/Size 8n.)
Outdoor Fan -Type
N0. Lhsdiphmteter
OriveTypeNtr, Speeds
CFM
Na MoloreHP
MotarRPM
5Ton Convertible
YSCO60A1 rCSC060A31A4, AW, AK
63,100 67.100
9.801— 10.20/-
2400/2,000 2.0002400
60,000 60.000
6.86 6.78
6Ton Convertible
VSC072A3,A4,AW, AK
72.000
—f10.2"
2.400100
69.000
Direct MI* Indoor Fan Type
No. UsodDlemeter On.)
thlveTypeNo.Speeds
No, Motors
Motor NP (Standard+Oversized)
Motor RPM iStandard/Ovend
Motor Freels &reiSlendard/Ovetatzed)
6.77
low Median liar Lew Medium', High law Median° HO
60.000 80.000 130,000 60,003 80,000 130,000 8040) 120,000 150,000
47400 83.000 103,000 48.000 64,000 101.000 64.E 97,200 121,500
81 81 80 81 81 80 8t 81 81
81 81 80 e1 81 80 81 81 81
2 2 3 2 2 3 2 3 3
1 1 1 1 1 1 1 2
4.5/14.0 4.5/14.0
4Sr1Q.0
10.0/14.0 10.0/14.0 1013114.0
1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 3/4
1/Scroll 1/SCroll i/SCroll
84 84
lanced Lanced nc
0.3125 03125 0taaoe5
8.81 8.81 13.883
2/17 2/17 17
lanced nc
0.3125 0.3125 :.3125
0.3125 0.3125
5.00 5.00 9.89
3/16 3/16 2/16
Short Orifice Short Orifice Short Orifice
1/44 NFT IPA NPT 1/$4 NPT
Propeller premia Baer
1/22 1122 1/26
Oirect/1 Oft ect/1 0
3,470 3,470
6,100
1/033 10.3r 1/0.701'
1875 1.075 1475
Fir Centrifugal FCeCentrif tgal WA
Direct/2 Dlreee2 N/A
1 1
0.90/1.00 0.90/1.0010 NA
985/1,!)80+ 885/14800 TWA
A
48/48 48/48 N/A
Belt Woe Indoor Fen -Type
No. Used/Diameter Poi
DrtveTypeNo. Speeds
No. Motors
Motor HP (Standard/Crashed)
Motor RPM (SteiximdAOvsized}
General
Data
(5 - 6 Tons}
Standard Efficie cy
Bron Convertible
VSUOSOA1
1 YSC060A3 A4 AW, AK
—FC
1/11 x11
B%WWartabte Sheave
1
too, -
1,75W —
Motor FremeSize <Standard Ove d) 481—
Fllees -Type Furnished' Throwaway lbroativeay
No.) Size Reoomnletxted (2) 20 x 25 x 1e (2)20
x 2Sx1"
1RetrtezerteCharge { the ofR-22P 4.7 4S 71
Notes: i
1. Coding Perfomancebrated at65Fatr ier1t,80Fertteringdrybut.67Fenterirguvetbulb.GrosseareeitydeednotincludeAregffactoffanmot rhest.ARlcaaacityisnetandincludes
the effect offan motor heat. Unita ere suitable far apertiontds20% canominalcim.UnitsarecertifiedIneccordanoeMiltareUnitaryAlr-ConditionerEgtripmenteertiGcationpmgrarn
which is based onARlStandard 710/240e dept AKgeOV/80Halunits.
Z EER aattior SEER are rated at MI oondillon8 a nd in accorthince vAill 00E tent procedures.
a Untag/mad Part Lend Value brated inecoo rtcewwithAAl$tandard210/240x380.Unitseraratedat80•Fambinn6 Fentering dry hub. and 6TFentering wetbuibatAMrsteddm•
¢ Heating Performance lintsettings and ratirgdate were eatabl'rlhodondapprwmdunder laboratory test conditionsusingAmericanNadawlStandardsinstitutestandards•
Ratings shown are for etevadarsup to 2000Jieet For elevations above 2000feet, ratings should be reduced at the rete of 4% for each 1000 feat above gas level '
S - APUEis rated M accordance with OOE test Procedures.
6. Outdoor Sound Rating ahownistested In� rem wfthARI Standard 270.For additional hd�rrtadonreforrmTa PP0.y0,
7. Refrigerant charge is enappnprimatevalue. a man precise vabre,see unit namotlleoend serviceinstviceans.
9. YSL1160At,3,4,WOverehedMotaand KStandard Mater Fan Otametaria12x11.
9 Motor RPM shown Is low speed. MO speed RPM is t t 00ft 136
10. filter size shown is for towand median heat modes. High hoot model finer site recommended is 20x30 x 1,
11.Optbnal Y pleated fitters afro evalsbte. I
12.Y$C072A wfrenumdin8botifomatappicajionhesenEER 01lOiend System Power t44Mof6.81,
13, Medium heat i4 not eve/able forAK 1386V/612Ht1 wills.
14.Outdoor motorta0.78hefor AK1380 6010iunits.
16.Outdoor nrotcrb0A0too forAK ammo Hz) umla.
16.Stamford Matwis1.00hpforYSC060AK38bV/60}fdwins,
17. Standrd Motris2.00hpforthaYSCO7 (3601.160144unhe.
6Ton Convertible
YSC072A3,A4, AW. AK
FC Centrifuge!
1/12x12
Bal artebia Sheave
1.Ofp2A0"
1.751.750
56156
ThrouensV
14)16x25x2
18
RT-PRCA06.EN
Proiect Parkway Village
Prepared By:
Performance Summary For 5t Unit
Part Number:5OKCQAO A2A5.OAOAO
ARI SEER'
Buse Unit Dimensions
Unit Length'
Unit Width:
Unit Height-
Operating
eight Operating Weight
Base Unit Weight..._..._._......___._...._ �_........_.___._._._.......
Medium Static Option Belt Drive:.......
Accessories
7.9/9.6/10.5 kW 2081230/240- /3.60 Volt Electric Heater:.
Single Point Kit..__..._-•--.-_..._.. _......_--•----_-..-- -
Total Operating Weight:.
14.30
74.4 in
46.8 in
41.4 in
610 lb
.......... ib
30 lb
10 ib
660 ib
Unit
Unit Voltage -Phase -Herts:.._..._...__...__.__
---• - - _.. 20860
Air Discharge'..
Vertical
Fan Drive Type .__..__.._...._._....._.. _.. _ . _. .
-..._........._........._.,Bert
Actual Airflow 20110
Site Altitude:....__._._._..._..__.._.._._._.... 0
CFM
ft
Cooling Performance
Condenser Entering Air DB:..___ -_.-.
. _ ......_.__......................__._---___........__. . 95.0 F
Evaporator Entering Air DBS....__ _......._.__......._.._....._ 80.9 F
Evaporator Entering Air ..... 67.0 F
Entering Air Enthalpy: ._.._..__ _--.
.._...._...._31.44 BTU/ib
Evaporator Leaving Air OB _..._._._._.._ _ 60.11 F
EvaporatorLeaving Air WB_......_...._.......____.........__._.._...._........._...__..._.._....._..._..._....._............._......._ ._ 58.1 F
Evaporator Leaving Air Entire! _ _...._......... _.__..._ .................._....._...__......._.._.___..2!1.12 BTU/lb
Gross Cooling Capacity:._...__.._..___......_.._._. 58.83 MBH
Gross Sensible Capacity _.._.._........_..._.-_.._... 43.20 MBH
Compressor Power Input_..._.._._ ._._.. 4.79 kW
Coil B _.__._...... _... _.._
ypass Factor ......._.._.-.._...-_._ _._.__.._..._......_..--_ .._.._ .................... -_....._..........._... 0.166
Hosting Performance
Outdoor Ambient Temperature:
Entering Air Indoor Coil OB:....._
Leaving Air Indoor Coil DB. __..__...._....._..._..-.--._._.._.._ 95.9 F
Total Heating Capacity: _....--.._-..._.�...._.........._._..__.._
--.._.._..............----......_....._.__.._....._............___._._..._..65.90 MBH
Integrated Heating Capacity __....-------_........._. _..... 55.90 MBH
Heating Power input_...__.._.....__. _.._._._.__. __.... 4.07 kW
HSPF:.._._.._.. --- - - .&2
Electric Heating Capacity:- --._ ._.._.._.. 15.8 O kW
Unit Leaving Air Temp:......._...__. __..
_ _.._ _ _ . ......_._.__.__.._ 120.8 F
Supply Fan
External Static Pressure:........__.___.._.._...._....._._...._..._..._.__.___........... _... 0.50 in wg
Options / Accessories Steric PreSsure
ElectricHeaters .__._.._.._.__....___._._..___._.-...._........____...__.___._._.._......._...._......---._ _........._..___........._......._......0.17 in wg
Total Application Static (ESP + Unit Opts/Ac..._........__._.._..._.._...__.._..__......_._......__..._..._...__..........---..0.67 in wg
FanRPM:...._..._._.._ ..................__. ___.1......_......._ 1182
FanPower... - -_.._._...._......._....._....._..._..._..__....... - 1.22 BHP
TE .---._._..___-•-•- Selected iFM RPM Range: 1066 -1380
47.6 F
70.0 F
Electrical Data
Voltage Range;_.._ .._..,...._.__.._
Compressor#1 RIA:
Packaged ' • . op = Wider .49
187 - 283
15.9
07/18/2017
07:42AM
Page 10 of 14
84
3"JJAite
c)"1„
Pte, 74(14 Slot'
133.
205' `4' co,tz ervt,, .
A
164 /04
44%1
gec 14,t,
551
4(
441 44
vw,mk(: ,)
scat
Moore
Engineering
Group
PROJECT:
Cetwi
ENGR: .\Y.f tY" I
DATE: 6/1/17
SCALE:
SHEET
2/1/2018
City of Tukwila
Department of Community Development
DAWNA PETET
899 W MAIN ST
AUBURN, WA 98001
RE: Permit No. M17-0109
RED WING SHOES
17135 SOUTHCENTER PKWY
Dear Permit Holder:
Allan Ekberg, Mayor
Jack Pace, Director
In reviewing our current records, the above noted permit has not received a final inspection by the City of Tukwila Building
Division. Per the International Building Code, International Mechanical Code, Uniform Plumbing Code and/or the National Electric
Code, every permit issued by the Building Division under the provisions of these codes shall expire by limitation and become null
and void if the building or work authorized by such permit has not begun within 180 days from the issuance date of such permit, or if
the building or work authorized by such permit is suspended or abandoned at any time after the work has begun for a period of 180
days. Your permit will expire on 3/13/2018.
Based on the above, you are hereby advised to:
1) Call the City of Tukwila Inspection Request Line at 206-438-9350 to schedule for the next or final inspection. Each
inspection creates a new 180 day period, provided the inspection shows progress.
-or-
2) Submit a written request for permit extension to the Permit Center at least seven(7) days before it is due to expire.
Address your extension request to the Building Official and state your reason(s) for the need to extend your permit.
The Building Code does allow the Building Official to approve one extension of up to 180 days. If it: is determined that your
extension request is granted, you will be notified by mail.
In the event you do not call for an inspection and/or receive an extension prior to 3/13/2018, your permit will become null and void
and any further work on the project will require a new permit and associated fees.
Thank you for your cooperation in this matter.
Sincerely,
ache le Ripley
Permit Technician
File No: M17-0109
6300 Southcenter Boulevard Suite #100 • Tukwila, Washington 98188 • Phone 206-431-3670 • Fax 206-431-3665
r'ERMIT COORS COPY,
PLAN REVIEW/ROUTING SLIP
PERMIT NUMBER: M17-0109 DATE: 08/11/17
PROJECT NAME: RED WING SHOES
SITE ADDRESS: 17135 SOUTHCENTER PKWY
X Original Plan Submittal
Response to Correction Letter #
Revision # before Permit Issued
Revision # after Permit Issued
DEPARTMENTS:
,-� 4wc 17 frJ A'/A-
Building Division Fire Prevention Planning Division ❑
Public Works ❑
Structural
Permit Coordinator
•
PRELIMINARY REVIEW:
Not Applicable ❑
(no approval/review required)
DATE: 08/15/17
Structural Review Required
REVIEWER'S INITIALS: DATE:
El
APPROVALS OR CORRECTIONS: DUE DATE: 09/12/17
Approved
Corrections Required
❑ Approved with Conditions
❑ Denied ❑
(corrections entered in Reviews) (ie: Zoning Issues)
Notation:
REVIEWER'S INITIALS:
DATE:
Permit Center Use Only
CORRECTION LETTER MAILED:
Departments issued corrections: BIdg 0 Fire 0 Ping 0 PW 0 Staff Initials:
12/18/2013
IECS INC
Home Espanol Contact
Safety & Health Claims & Insurance
0 Washington State Department of
Labor & Industries
Search L&I
Page 1 of 3
A -Z Index Help My L&J
Workplace Rights Trades & Licensing
IECS INC
Owner or tradesperson
Principals
HUMPHREY, GEORGE, PRESIDENT
Doing business as
IECS INC
WA UBI No.
601 639 846
PO Box 19252
SEATTLE, WA 98109-1252
206-939-9495
KING County
Business type
Corporation
License
Verify the contractor's active registration / license / certification (depending on trade) and any past violations.
Construction Contractor
License specialties
Heating/Vent/Air-Conditioning and Refrig
(HVAC/R)
License no.
IECS***044QL
Effective — expiration
11/13/1996-11/20/2018
Bond
No bond accounts during the previous 6 year period.
Insurance
Active.
Meets current requirements.
Nationwide Mutual Ins Co $1,000,000.00
Policy no.
ACPACT07555636456
Received by L&I Effective date
08/01/2017 08/01/2017
Expiration date
08/01/2018
Insurance history
Savings
(in lieu of bond) $6,000.00
Received by L&I Effective date
11/20/2001 11/20/2001
Release date Impaired date
N/A N/A
Savings account ID
Savings history
Lawsuits against the bond or savings
No lawsuits against the bond or savings accounts during the previous 6 year period.
L&I Tax debts
No L&I tax debts are recorded for this contractor license during the previous 6 year period, but some debts
may be recorded by other agencies.
Help us improve
https://secure.lni.wa.gov/verify/Detail.aspx?UBI=601639846&LIC=IECS * * * 044QL&SAW= 9/5/2017
IECS INC
License Violations
No license violations during the previous 6 , period.
Workers' comp
Do you know if the business has employees? If so, verify the business is up-to-date on workers' comp premiums.
L&I Account ID Account is current.
845,304-01
Doing business as
SEATTLE MECHANICAL
Estimated workers reported
Quarter 2 of Year 2017 "11 to 20 Workers"
L&I account contact
T4 / ALISON WOODWARD (360)902-4629 - Email: WOAL235@Ini.wa.gov
Public Works Strikes and Debarments
Verify the contractor is eligible to perform work on public works projects.
Contractor Strikes
No strikes have been issued against this contractor.
Contractors not allowed to bid
No debarments have been issued against this contractor.
Workplace safety and health
Check for any past safety and health violations found on jobsites this business was responsible for.
Inspection results date
06/14/2016
Inspection no.
317939701
Location
6428 California Ave SW
Seattle, WA 98109
Inspection results date
03/31/2015
Inspection no.
317935645
Location
13028 Interurban AVE
Tukwila, WA 98178
Inspection results date
04/09/2013
Inspection no.
316583194
Location
940 NE Park Dr
Issaquah, WA 98029
Inspection results date
12/11/2012
Inspection no.
316257716
Location
3325 South 116th Building #2
Seattle, WA 98168
Inspection results date
04/10/2012
Violations
Violations
Violations
Violations
Violations
Page 2 of 3
Help us improve
https://secure.lni.wa.gov/verify/Detail.aspx?UBI=601639846&LIC=IECS* * *044QL&SAW= 9/5/2017
IECS INC
Inspection no.
315954495
Location
300 Park Ave
Bremerton, WA 98337
Page 3 of 3
Washington State Dept. of Labor & Industries. Use of this site is subject to the laws of the state of Washington.
Help us improve
https://secure.lni.wa.gov/verify/Detail.aspx?UBI=601639846&LIC=IECS* * *044QL&SAW= 9/5/2017