HomeMy WebLinkAboutPermit S16-0058 - MI MOTION INDUSTRIES - BUILDING MOUNTED SIGNSMOTION INDUSTRIES
18436 CASCADE AVE S 160
S16-0058
2 PERMANENT BUILDING MOUNTED
SIGNS
File No.
Name of Tenant:
Sign Address:
Date Photo Taken:
SITE INSPECTION (PLANNING)
S16-0058
Motion Industries
18436 Cascade Ave S 160
04/04/2017
X Sign appears to conform to permit application
Sign appears different from permit application
Sign not installed as of XX/XX/200X
Make new site visit and take photo by XX/XX/200X
Comments: Sign inspected and final approval granted. J. Joseph
Parcel No:
Address:
City of Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206-431-3670
Web site: http://www.TukwilaWA.gov
PERMANENT SIGN PERMIT
7888900030
18436 CASCADE AVE S 160
Permit Number: S16-0058
Issue Date:
Permit Expires On: 5/21/2017
Owner:
Name:
Address:
Contact Person:
Name:
Address:
Contractor:
Name:
Address:
License No:
Business:
Name:
Address:
CPF KENT VALLEY LLC
100 WILSHIRE BLVD #700 , SANTA MONICA, WA, 90401
Morgan Williams
960 Industry Dr, Tukwila, WA, 98188
WHOLESALE SIGN SOLUTIONS
14408 SE 256 PL, KENT, WA, 98042
WHOLESS92304
Phone: (206) 466-1631
Phone: (253) 630-5285
Expiration Date: 12/4/2016
DESCRIPTION OF WORK:
Fees Collected: $520.80 Zoning: CLI Electricity Provided by: PUGEST SOUND ENERGY
Types of Sign:
1. BUILDING -WALL
EXPOSED BUILDING FACE:
SIGN AREA (SQ FT):
2. BUILDING -WALL
EXPOSED BUILDING FACE:
SIGN AREA (SQ FT):
1786
49
1786
49
/
Planning Division Authorized Signature: Date: 11/22/16
I hearby certify that I have read and examined this permit and know the same to be true and correct. All
provisions of law and ordinances governing this work will be complied with, whether specified herein or not.
Signature:
ACCEPTANCE BY EMAIL
Print Name:
IS SIGNATURE FOR
PERMIT AND CONDITIONS
Date:
THIS PERMIT SHALL BECOME NULL AND VOID IF THE WORK I5 NOT COMMENCED WITHIN 180 DAYS FROM THE
DATE OF ISSUANCE, OR IF THE WORK IS SUSPENDED OR ABANDONED FOR A PERIOD OF 180 DAYS FROM THE
LAST INSPECTION.
Sign permit inspections are conducted once a month. This allows approximately 30 days for the sign to be
manufactured and installed. Please let us know if more time is needed.
If payment for the job is pending final inspection approval, please provide the sign permit information by email
to max.baker@tukwilawa.gov or call 206-431-3683 and we will complete the inspection within
five (5) business days.
Electrical permits and inspections occur independent of this permit.
FINAL INSPECTION APPROVAL: DATE:
CITY OF TUKWILA
Department of Community Development
6300 Southcenter Boulevard, Tukwila, WA 98188
Telephone: (206) 431-3670
.
PERMANENT SIGNS
Building Mounted And
Freestanding
PERMANENT SIGN PERMIT APPLICATION
FOR STAFF USE ONLY
Planner :
File Number : 5 mg, -0968.
Needs Electrical : Yes / No
Associated File Numbers :
Zoning of Site:
•
Commercial/Industrial
Residential
Number of Building Mounted Signs included in application: Z
Number of Freestanding/Monument Signs included in application: 0
Other signs included in application (Dynamic / Canopy /Awning / Other): 0
Text on sign will read: Mi Motion Industries
Name of Tenant: Motion Industries
Address of Tenant / Business: 18436 Cascade Ave S, Suite 160, Tukwila
Contractor: Wholesale Sign Solutions (Legal:B & K Taylor Corp)
Contractor State License #: CC WHOLESS923O4
Contractor's City of Tukwila Business License #: BUS -0101758
Contractor Address: 960 Industry Dr Cit, Tukwila
Contact Name for Permit: Morgan Williams
St WA Zip 98188
Contact Address: 960 Industry Dr City Tukwila
Contact E-mail: morgan@wholesalesignsolutions.com
St WA Zip 98188
Contact Phone: 206-466-1631
I HEREBY CERTIFY that the information contained in this application and the materials furnished to the City by me are true. I
understand that if I provide incorrect information on this application or submit plans that are not correct, it could delay issuance of a
permit or, if the permit h. s been issued, be cause for the City to revoke the sign permit.
III 'Silk
Date:
Signaturher or Authorized Agent
RECEIVED
NOV 16 2016
COMMUNITY
DL-VLLUI'MLNT
Worksheet for Building -Mounted Signs in Commercial/Industrial
Zones
The City's sign code permits a variety of building mounted signs, including wall signs, signs on awnings, canopy signs and
projecting signs. This sign permit application can be used to determine the total number of building mounted signs permitted
for your business. The application also provides the specific code standards for the common types of building mounted signs;
see TMC 19 Sign Code for details. Please note that you may not qualify for all signage types outlined in this application.
Wall Sign
Each public entrance is eligible for either a flush mounted wall sign or an awning face sign.
In some cases an additional wall sign maybe permitted on walls that do not have entrances, see Section 2 of this application.
Use the table below to determine the maximum permitted size' of your wall sign:
Maximum Sign Area
AREA = (L x H) of Exposed Building Face
(EBF) in square feet =
Permitted Sign Area
0-500
EBF x.05 or 20 square feet, whichever is larger
501-1,500
(EBF -500) x .04 + 25 square feet
1501-3,000
(EBF -1,500) x .03+ 65 square feet
3,001-5,000
(EBF -3,000) x .02+ 110 square feet
Over 5,000
150 square feet maximum
Wall Sign Worksheet
*To meet requirements, please refer to the information and tables provided in this document
I This table is inapplicable if your site is covered under an approved Master Sign Program and an increase in sign area was
granted.
Sign #1
Sign #2
Sign #3
Reserved
for City
Use
For more detail see the Sign
Code Language,
TMC 19.20.050 A.
(use add'l sheet
if needed for
add'l signs)
Wall Area
guz_
l "1.8(Q
The size of the sign is based on
the area of the wall fronting the
tenant space where the sign will
be located, see 19.08.110.
Maximum
Sign Area
3
-1S.
Calculate the maximum sign
area allowed for the wall from
the table above.
s
Proposed
Area of(�
Sign
40\_
t _ 1
Calculate the area by drawing
one box around the entire sign
face or copy using 90 degree
angles.
Sign Copy
nov - 0..c
bC �n�c
At TYle4;on
1wjost-,nes
laCt Me 4k
b is `1Q �S
(A; NV10 t
1cAtIoseS
List what the sign will say
(for example: name of business).
I This table is inapplicable if your site is covered under an approved Master Sign Program and an increase in sign area was
granted.
J
Incentive Signage Provision
Businesses may be permitted additional flush -mounted building signage on walls fronting their tenant spaces that do not
qualify for the signage described in Section 19.20.50.A, under the following circumstances:
a. The business or use may not have any other building -mounted signage oriented in the same direction as the incentive
sign.
b. Architectural interest must be provided through at least one of the following methods:
1) At least 50 percent of the wall area between the height of two and seven feet must be transparent with either an
unobstructed view into the business or use, or a display window with a depth of at Least three feet.
2) Architectural detailing consistent with the building design using changes in color, materials, texture and
variations in the wall plane.
3) Artwork such as mosaic, mural or sculptural relief over at least 50 percent of the wall surface.
4) One or more trellises covering at least 50 percent of the wall area between the height of two and seven feet,
planted with climbing vines and other plant materials in a planting bed at least two feet in width and provided
with permanent irrigation.
5) The allowable area of the sign is 50 percent of that calculated in "Table 22 — Allowable Message Area for
Permanent Wall Signs in Commercial and Industrial Zones."
2 See table on front side — "maximum sign area"
Corner Properties
Some corner properties may qualify for more than one monument sign, even if they have a limited amount of
street frontage. A property that borders on more than one public street, but has less than 800 total feet of linear
frontage, is permitted to have one monument sign per street if the following criteria are met:
1. The property has a least 200 feet of frontage on each public street where a sign will be placed;
2. Each public street provides direct access to the property; and
3. For each separate street frontage Table 1 listed above shall be used to determine the design standards for
any proposed monument sign.
Non -Conforming Signs
Some properties that have a non -conforming sign permit may be able to reface or change the panels of existing
non -conforming signs provided the area, height, and location remain unchanged. For more information see
chapter 19.36 of the Tukwila Municipal Code.
Free Standing Sign Worksheet
*To meet requirements, please refer to the information and tables provided in this document
Monument Sign 1
Monument Sign 2
Monument Sign 3
Monument Sign 4
Name of street on
which sign will be
placed
Sign size per face
Message area per
face
Width of Sign
Sign Height
(ft -in)
Distance (ft) from
closest edge of
sign to property
lines
Text on Sign
f
Worksheet for Freestanding Signs in
Commercial/Industrial Zones
A sign permit is required for the installation of a new freestanding sign. In most circumstances the City only
allows new freestanding signs to be monument style signs. Certain large premises that have gone through the
Master Sign Program are eligible for grand monument signs. Information on installing a new freestanding sign
is found in section 1 of this application, with information on installing new grand monument signs following
section 1.
Freestanding Signs
Each premise is permitted to have one freestanding -monument style sign. Additional monument signs are
permitted based on the total amount of linear street frontage along the premise. Table 1 below outlines the
development standards and total number of signs permitted for most premises.
Total ROW
of Premise
Allowable Sign Message
Areal
Total Allowable
Sign Size2
Maximu
m Height
Number of
Signs
Less than 400
feet
36 square feet per side/72
square feet total
54 square feet per
side/108 square feet total
6 feet
One
400-599 feet
50 square feet per side/100
square feet total
70 square feet per
side/140 square feet
total
7 feet
One
600-799 feet
60 square feet per side/120
square feet total
80 square feet per
side/160 square feet
total
7 feet
One
800-999 feet
66 square feet per side/132
square feet total
88 square feet per
side/176 square feet
total
8 feet
Two
1,000 feet and
over
72 square feet per side/1.44
square feet total
96 square feet per
side/192 square feet
total
8 feet
One for every
400 feet of
linear street
frontage.
General Requirements for Monument Signs in Commercial and Industrial Zones
1. Setback: All monument signs shall be placed at a minimum of 5 feet from all property lines; however no
sign taller than three feet shall be placed within the sight distance triangle, unless it can be demonstrated
the sign will not pose a safety risk by reducing visibility for motorists turning out into traffic.
2. Maximum Width: The maximum width permitted for any new monument sign is 15 feet,
3. Address Requirement:. All new freestanding signs shall have the address number or address range of the
premise listed on the structure. The address shall not be counted toward the allowable sign message area
limit. Address numbers must be plainly legible and visible from the street fronting the property. The
address numbers must contrast with the sign background. Address numbers shall be Arabic numerals or
alphabet letters. Numbers shall be a minimum of 4 inches high with a minimum stroke width of 1.5 inches.
1 The allowable message area is either the face pane of the sign, or for channel letters or signs painted on seating or retaining
walls, that portion of the sign devoted to the actual message, logo, or business name.
2 Total size is the entire area of the sign, including the support structure.
Requirements For Dynamic Signs In Residential Zones
1. One monument sign per premise, as permitted under Section 19.20.030.B, may contain a dynamic feature.
The following design standards apply to all dynamic signs installed under this section:
a. The image of the sign may not change more frequently than once every ten seconds.
b. The image must appear and disappear as one image. The image may not appear to flash, undulate, pulse or
portray explosions, fireworks, flashes of light, or blinking or chasing lights, or appear to move toward or away
from the viewer, to expand, contract, bounce, rotate, spin, twist, scroll, travel or otherwise portray movement.
c. Illumination of the dynamic sign is limited to the hours of 7AM to 10PM.
d. All signs shall have installed ambient light monitors, and shall at all times allow such monitors to automatically
adjust the brightness level of the electronic sign based on ambient light conditions. Maximum brightness levels
for electronic signs hall not exceed 3 -foot candle above ambient light conditions, measured 100 feet from the
face.
2. Notice of Understanding. The owner of any dynamic sign installed per this subsection must submit a letter to the
Director stating that he/she understands and agrees to abide by the above requirements.
Residential Sign Worksheet
*To meet allowable signage requirements, please refer to the information and tables provided on page 1
Residential Zone Monument / Free -Standing Sign
Square footage of sign face:
Total square footage of all sides:
Sign height (maximum of 5 feet):
Sign width (maximum of 15 feet):
Residential Zone Flush -Mounted Building Sign (Wall Sign)
Area of Exposed Building Face (sq. ft.):
Maximum permitted sign area:
Proposed area of sign:
r 1
l
Worksheet for Signs in Residential Zones
Institutional uses and multi -family complexes are allowed one flush -mounted wall sign per building and
one freestanding monument -style sign for each public street that provides access to the premise.
Monument / Free -Standing Sign Design Standards
1. The area of a monument sign is limited to 30 square feet per sign face and a total of 60 square feet for all sides.
Monument signs located on a premise with at least one building that is certified as LEED by the GBCI shall be
permitted to be 35 square feet per face and a total of 70 square feet for all sides.
2. Monument signs shall be no taller than five feet.
3. Maximum width of the sign shall not exceed 15 feet.
4. The sign must meet sight distance triangle restrictions.
5. The sign shall be located in a landscaped area.
6. The sign may only use indirect down lighting methods except for dynamic signs as allowed under
TMC 19.20.030 (D). The lighting shall have no spillover impact on adjacent properties.
7. A monument sign permitted under this section is permitted to a complete reface, panel changes and copy changes
without the need to obtain a new permit, provided ALL of the following criteria are met:
a. The monument sign was authorized by the City under a permit issued on or after August 24, 2010.
b. The property owner, or authorized agent of the property owner, was the applicant to secure the permit as required under
this section.
c. The reface or copy change does not include any structural changes to the sign that result in a change of sign or
message area, modification in sign height, inclusion of a dynamic sign component, or change in the monument sign's
location.
d. Within 30 days of completion of the copy change or reface, the property owner or authorized agent shall transmit to the City
a Notice reface / copy change
Flush -Mounted Building Sign Design Standards
1. The maximum area of any flush -mounted building sign is limited to the calculation from Table 2 in Section
19.20.050; however, in no case shall the area of a flush -mounted building sign be greater than 50 square feet.
2. Lighting for flush -mounted building signs shall be limited to indirect, concealed and backlit devices. The lighting shall produce no
spillover or glare onto adjacent properties.
Table 2:
Area (L*H) of Exposed building face (EBF) in
Square Feet
Permitted Sign Area
0 - 500
EBF * .05 or 20 square feet
501-1,500
(EBF — 500) * .04 + 25 square feet
1,501 — 3,000
(EBF —1,500) * .03 + 65 square feet
3-001— 5,000
(EBF — 3,000) * .02 +110 square feet
Over 5,000 (except for buildings within the MIC/H
District)
150 square feet maximum size permitted
(See reverse side for requirements for dynamic signs in residential zones.)
Depallment of Labor and Industries
PO Box 44450
Olympia, WA 98504-4450
185
WHOLESALE SIGN SOLUTIONS
14408 SE 256TH PL
KENT WA 98042
WHOLESALE SIGN SOLUTIONS
Reg: CC WHOLESS923O4
UBI: 602-242-095
Registered as provided by Law as:
Construction Contractor
(CCSX) - Signs
Effective Date: 9/24/2008
Expiration Date: 12/4/2016
z
0
z
-I mum 31
z
2
v
v r.
O O
PCS
N in MINO
N
m
YI in
„Z/I- :TWOS
O 41%
K.)
m
x
c
3
1 1 1
1 1 1
V
' rp.N�
W 5 U (J7
C
0 CL X (rD
CD
CD
W
0
JAd,d/L
poipatAi IuawgDel1y
0: 3/16"x 3" aluminum stud