HomeMy WebLinkAboutPermit D18-0385 - FRANTSEVICH RESIDENCE - LAP SIDING REPLACEMENTFRANTSEVICH RESIDENCE
12811 35TH AVE S 2PX
AP N : 7359600270
EXPIRED
04/29/2021
D18-0385
Parcel No:
Address:
0
City of Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206-431-3670
Inspection Request Line: 206-438-9350
Web site: http://www.TukwilaWA.gov
7359600270
12811 35TH AVE S 2PX
DEVELOPMENT PERMIT
Project Name: FRANTSEVICH RESIDENCE
Permit Number: D18-0385
Issue Date: 12/19/2018
Permit Expires On: 6/17/2019
Owner:
Name:
Address:
Contact Person:
Name:
Address:
Contractor:
Name:
Address:
License No:
Lender:
Name:
Address:
HUIYI WU
12065 70TH AVE S , SEATTLE, WA,
98178
MIKOLA FRANTSEVICH
12811 35TH AVE S , TUKWILA, WA,
98188
AFFIDAVIT- MIKOLA FRANTSEVICH
Phone: (253) 269-2748
Phone:
Expiration Date:
DESCRIPTION OF WORK:
REPLACE EXISTING LAP SIDING
Project Valuation: $4,500.00
Type of Fire Protection: Sprinklers:
Fire Alarm:
Type of Construction: VB
Electrical Service Provided by: TUKWILA
Fees Collected: $342.99
Occupancy per IBC: R-2
Water District: 125
Sewer District: VALLEY VIEW
Current Codes adopted by the City of Tukwila:
International Building Code Edition:
International Residential Code Edition:
International Mechanical Code Edition:
Uniform Plumbing Code Edition:
International Fuel Gas Code:
2015
2015
2015
2015
2015
National Electrical Code:
WA Cities Electrical Code:
WAC 296-46B:
WA State Energy Code:
2017
2017
2017
2015
Public Works Activities:
Channelization/Striping:
Curb Cut/Access/Sidewalk:
Fire Loop Hydrant:
Flood Control Zone:
Hauling/Oversize Load:
Land Altering:
Landscape Irrigation:
Sanitary Side Sewer:
Sewer Main Extension:
Storm Drainage:
Street Use:
Water Main Extension:
Water Meter:
Volumes: Cut: 0 Fill: 0
Number: 0
No
Permit Center Authorized Signature:
Date: I `� 848
I hearby certify that I have read and examined this permit and know the same to be true and correct. All
provisions of law and ordinances governing this work will be complied with, whether specified herein or not.
The granting of this permit does not presume to give authority to violate or cancel the provisions of any other
state or local laws regulating construction or the performance of work. I am authorized to sign and obtain this
development permit and agree to he-co-ridached to this permit.
Signature:
Print Name:
M< °Ill, r1 et�-P/v' (/ l -t
Date: ,2/
This permit shall become null and void if the work is not commenced within 180 days for the date of issuance, or if
the work is suspended or abandoned for a period of 180 days from the last inspection.
PERMIT CONDITIONS:
1: ***BUILDING PERMIT CONDITIONS***
2: Work shall be installed in accordance with the approved construction documents, and any changes made
during construction that are not in accordance with the approved construction documents shall be
resubmitted for approval.
3: All permits, inspection record card and approved construction documents shall be kept at the site of work
and shall be open to inspection by the Building Inspector until final inspection approval is granted.
4: All construction shall be done in conformance with the Washington State Building Code and the
Washington State Energy Code.
5: Remove all demolition rubble and loose miscellaneous material from lot or parcel of ground, properly cap
the sanitary sewer connections, and properly fill or otherwise protect all basements, cellars, septic tanks,
wells, and other excavations. Final inspection approval will be determined by the building inspector based
on satisfactory completion of this requirement.
6: All electrical work shall be inspected and approved under a separate permit issued by the City of Tukwila
Permit Center.
7: VALIDITY OF PERMIT: The issuance or granting of a permit shall not be construed to be a permit for, or an
approval of, any violation of any of the provisions of the building code or of any other ordinances of the City
of Tukwila. Permits presuming to give authority to violate or cancel the provisions of the code or other
ordinances of the City of Tukwila shall not be valid. The issuance of a permit based on construction
documents and other data shall not prevent the Building Official from requiring the correction of errors in
the construction documents and other data.
PERMIT INSPECTIONS REQUIRED
Permit Inspection Line: (206) 438-9350
1700 BUILDING FINAL**
0409 FRAMING
CITY OF TUKWILA
Community Development Department
Public Works Department
Permit Center
6300 Southcenter Blvd, Suite 100
Tukwila, WA 98188
http://www.TukwilaWA.gov
Building Permit No. D19 - 0 S
Project No.
Date Application Accepted: I)•-
Date Application Expires:
(For office use only)
CONSTRUCTION PERMIT APPLICATION
Applications and plans must be complete in order to be accepted for plan review.
Applications will not be accepted through the mail or by fax.
**Please Print**
SITE LOCATION 1 2+g I, 35.- 447 ave. S 8 T A kw i I G. 1AJ 4
King Co Assessor's Tax No.: 1S (Do - 021-0
Suite Number: Floor:
New Tenant: ,...Yes ❑ ..No
Site Address: 1 2$ Ik 3S" ave S
Tenant Name: M I K o l o. FYo.✓! 4-24,
PROPERTY OWNER
,
Name: (itc0IA `FYan.ts iVh
Address: I Z$ it grit') ova S
City: TtAicivi `k. State: WA_ Zip: CkStt6
CONTACT PERSON — person receiving all project
communication
Name: S- a
O4W�s
Q b 90 -y
r a winter
Address:
//
Phone: Fax:
City:
State:
Zip:
Phone: 2s3 Z/
G �
V
gill
State:
Email:
Phone:
City:
GENERAL CONTRACTOR INFORMATION
Company Name: SO.i„ t.. AS
rp #?4,(4 /
Address: d 141 ,� s
JJ
City: State: Zip:
Phone: Fax:
Contr Reg No.: Exp Date:
Tukwila Business License No.:
H:\Applications\Forms-Applications On Line \2011 Applications\Permit Application Revised - 8-9-11.docx
Revised: August 2011
bh
ARCHITECT OF RECORD
Name:
iv/
Company Name:
Company Name:
Ki
V I
t v
Engineer Name:
Architect Name:
Address:
Address:
State:
Zip:
Phone:
City:
State:
Zip:
Phone:
Fax:
Email:
ENGINEER OF RECORD
Name:
iv/
Company Name:
I I k
iv
Engineer Name:
Address:
City:
State:
Zip:
Phone:
Fax:
Email:
LENDER/BOND ISSUED (required for projects $5,000 or
greater per RCW 19.27.095)
Name:
iv/
Address:
City: State: Zip:
Page 1 of 4
etaN
BUILDING PERMIT INFORMATION - 206-431-3670
Valuation of Project (contractor's bid price): $ e''(SO 0
Describe the scope of work (please provide detailed information):
Pell cw2, eA lS-i'; h9 t S)
Will there be new rack storage? 0 Yes
Existing Building Valuation: $ 2-1-÷ 000
No If yes, a separate permit and plan submittal will be required.
Provide All Building Areas in Square Footage Below
PLANNING DIVISION:
Single family building footprint (area of the foundation of all structures, plus any decks over 18 inches and overhangs greater than 18 inches)
*For an Accessory dwelling, provide the following:
Lot Area (sq ft): Floor area of principal dwelling: Floor area of accessory dwelling:
*Provide documentation that shows that the principal owner lives in one of the dwellings as his or her primary residence.
Number of Parking Stalls Provided: Standard: Compact: Handicap:
Will there be a change in use? 0 Yes ❑ No If "yes", explain:
FIRE PROTECTION/HAZARDOUS MATERIALS:
0 Sprinklers 0 Automatic Fire Alarm
❑ None
Other (specify}) 40.0,. 6
Will there be storage or use of flammable, combustible or hazardous materials in the building? ❑ Yes No
If "yes', attach list of materials and storage locations on a separate 8-1/2"x 11" paper including quantities and Material Saf ty Data Sheets.
SEPTIC SYSTEM
❑ On-site Septic System - For on-site septic system, provide 2 copies of a current septic design approved by King County Health
Department.
H:\Applications\Forms-Applications On Line \2011 Applcations\Permit Application Revised - 8-9-11.docx
Revised: August 2011
bh
Page 2 of 4
Existing
Interior Remodel
Addition to
Existing
Structure
New
Type of
Construction per
Type of
Occupancy per
IBC
1st Floor
/ ZOO
— -
—
Jp
T% [ G r
AIBC
f eg1 en Ii_ i
2"d Floor
1 (/Q 0
TiffL S-
1''•
3`d Floor
Floors thru
Basement
Accessory Structure*
Attached Garage
34)0
_
�_
Tib' S.." -
„__
Detached Garage
Attached Carport
Detached Carport
Covered Deck
Uncovered Deck
PLANNING DIVISION:
Single family building footprint (area of the foundation of all structures, plus any decks over 18 inches and overhangs greater than 18 inches)
*For an Accessory dwelling, provide the following:
Lot Area (sq ft): Floor area of principal dwelling: Floor area of accessory dwelling:
*Provide documentation that shows that the principal owner lives in one of the dwellings as his or her primary residence.
Number of Parking Stalls Provided: Standard: Compact: Handicap:
Will there be a change in use? 0 Yes ❑ No If "yes", explain:
FIRE PROTECTION/HAZARDOUS MATERIALS:
0 Sprinklers 0 Automatic Fire Alarm
❑ None
Other (specify}) 40.0,. 6
Will there be storage or use of flammable, combustible or hazardous materials in the building? ❑ Yes No
If "yes', attach list of materials and storage locations on a separate 8-1/2"x 11" paper including quantities and Material Saf ty Data Sheets.
SEPTIC SYSTEM
❑ On-site Septic System - For on-site septic system, provide 2 copies of a current septic design approved by King County Health
Department.
H:\Applications\Forms-Applications On Line \2011 Applcations\Permit Application Revised - 8-9-11.docx
Revised: August 2011
bh
Page 2 of 4
PUBLIC WORKS PERMIT INFORMATION - 206-433-0179
Scope of Work (please provide detailed information):
Call before you Dig: 811
Please refer to Public Works Bulletin #1 for fees and estimate sheet.
Water District
❑ ...Tukwila ❑...Water District #125
❑ ...Water Availability Provided
Sewer District
❑ ...Tukwila
❑ ...Sewer Use Certificate
❑...Valley View
❑...Sewer Availability Provided
❑ .. Highline
0 .. Renton
❑ .. Renton
❑ .. Seattle
Septic System:
0 On-site Septic System — For on-site septic system, provide 2 copies of a current septic design approved by King County Health Department.
Submitted with Application (mark boxes which apply):
❑ ...Civil Plans (Maximum Paper Size — 22" x 34")
❑ ...Technical Information Report (Storm Drainage)
❑ ...Bond ❑ .. Insurance ❑ .. Easement(s)
Proposed Activities (mark boxes that apply):
❑ ...Right-of-way Use - Nonprofit for less than 72 hours
❑ ...Right-of-way Use - No Disturbance
❑ ...Construction/Excavation/Fill - Right-of-way 0
Non Right-of-way 0
❑ ...Total Cut cubic yards
❑ ...Total Fill cubic yards
❑ ...Sanitary Side Sewer
❑ ...Cap or Remove Utilities
❑ ...Frontage Improvements
❑ ...Traffic Control
❑ ...Backflow Prevention - Fire Protection
Irrigation
Domestic Water
❑.
❑.
❑.
❑.
❑ .. Geotechnical Report
❑ .. Maintenance Agreement(s)
❑ ...Traffic Impact Analysis
❑ ...Hold Harmless — (SAO)
0... Hold Harmless — (ROW)
❑ .. Right-of-way Use - Profit for less than 72 hours
❑ .. Right-of-way Use — Potential Disturbance
❑ .. Work in Flood Zone
❑ .. Storm Drainage
. Abandon Septic Tank
. Curb Cut
. Pavement Cut
. Looped Fire Line
❑ ...Permanent Water Meter Size...
❑ ...Temporary Water Meter Size ..
❑ ...Water Only Meter Size
❑ ...Sewer Main Extension Public 0
❑ ...Water Main Extension Public 0
7)
0 .. Grease Interceptor
❑ .. Channelization
❑ .. Trench Excavation
❑ .. Utility Undergrounding
WO #
WO #
WO # ❑ ...Deduct Water Meter Size
Private 0
Private 0
f>
FINANCE INFORMATION
Fire Line Size at Property Line Number of Public Fire Hydrant(s)
❑ ...Water ❑ ...Sewer ❑ ...Sewage Treatment
Monthly Service Billing to:
Name: Day Telephone:
Mailing Address:
Water Meter Refund/Billing:
Name:
Mailing Address:
City
State
Zip
Day Telephone:
City
State
Zip
H:\Applications\Forms-Applications On Line \2011 Applications\Permit Application Revised - 8-9-11.docx
Revised: August 2011
bh
Page 3 of 4
PERMIT APPLICATION NOTES —
Value of Construction — In all cases, a value of construction amount should be entered by the applicant. This figure will be reviewed and is subject
to possible revision by the Permit Center to comply with current fee schedules.
Expiration of Plan Review — Applications for which no permit is issued within 180 days following the date of application shall expire by limitation.
The Building Official may grant one or more extensions of time for additional periods not exceeding 90 days each. The extension shall be
requested in writing and justifiable cause demonstrated. Section 105.3.2 International Building Code (current edition).
I HEREBY CERTIFY THAT I HAVE READ AND EXAMINED THIS APPLICATION AND KNOW THE SAME TO BE TRUE UNDER
PENALTY OF PERJURY BY THE LAWS OF THE STATE OF WASHINGTON, AND I AM AUTHORIZED TO APPLY FOR THIS PERMIT.
BUILDING OWNER OR AUTHORIZED AG
Signature: •�^1
Print Name: M 1 V L& Met
.1(6.11'�—J 1
Mailing Address: NA I ` TJ- 44k- S
Day Telephone:
Tut kw;I'(,
City
H:1ApplicationsWorms-Applications On Line12011 Applications\Permit Application Revised • 8-9-11.docx
Revised: August 2011
bh
Date: VII elPI
24-3 -Z6q 2/-(41
WA- qi1U
State Zip
Page 4 of 4
Cash Register Receipt
City of Tukwila
Receipt Number
R15990
DESCRIPTIONS
PermitTRAK
ACCOUNT
1 QUANTITY
PAID
$342.99
D18-0385 Address: 12811 35TH AVE 5 2PX Apn: 7359600270
$342.99
Credit Card Fee
$9.99
Credit Card Fee
R000.369.908.00.00
0.00
$9.99
DEVELOPMENT
$323.40
PERMIT FEE
R000.322.100.00.00
0.00
$192.06
PLAN CHECK FEE
R000.345.830.00.00
0.00
$124.84
WASHINGTON STATE SURCHARGE
B640.237.114
0.00
$6.50
TECHNOLOGY FEE
$9.60
TECHNOLOGY FEE
TOTAL FEES PAID BY RECEIPT: R15990
R000.322.900.04.00
0.00
$9.60
$342.99
Date Paid: Thursday, December 06, 2018
Paid By: MIKOLA FRANTSEVICH
Pay Method: CREDIT CARD 02964P
Printed: Thursday, December 06, 2018 3:55 PM 1 of 1
SYSTEMS
CO TUKWILA ETRAKIT
6200 SOUTHCENTER BLVD
TUKWILA, WA 98188
206-433-1870
CITY OF TUKWILA
0017340000802374464500
Date: 12/06/2018 03:54:31 PM
CREDIT CARD SALE
MASTERCARD
CARD NUMBER: **********1923 K
TRAN AMOUNT: $342.99
APPROVAL CD: 02964P
RECORD #: 000
CLERK ID: jazzel
X
{CARDHOLDER'S SIGNATURE}
I AGREE TO PAY THE ABOVE TOTAL AMOUNT
ACCORDING TO THE CARD ISSUER AGREEMENT
(MERCHANT AGREEMENT IF CREDIT VOUCHER)
Thank you!
Merchant Copy
Page 1 of 2
https: //classic. convergepay.com/V irtualMerchant/transaction. do?dispatchMethod=printTra... 12/6/2018
Page 2 of 2
CO TUKWILA ETRAKIT
6200 SOUTHCENTER BLVD
TUKWILA, WA 98188
206-433-1870
CITY OF TUKWILA
Date: 12/06/2018 03:54:31 PM
CREDIT CARD SALE
MASTERCARD
CARD NUMBER: **********1923 K
TRAN AMOUNT: $342.99
APPROVAL CD: 02964P
RECORD #: 000
CLERK ID: jazzel
Thank you!
Customer Copy
https: //classic. convergepay.com/V irtualMerchant/transaction. do?dispatchMethod=printTra... 12/6/2018
1
J
AI •
cA\ 34 it -
t2, to 8 6 q 2 0
�2Si' f_lW00Y1
SEPARATE PERMIT
REQUIRED FOR:
EiY Mechanical
Ei7 Electrical
®' Plumbing
VX Gas Piping
City of Tukwila
BUILDING DIVISION
FIL COPY
Permit No. . 1 G 3 v
rmS
Plan review approval is subject to errors ana
omissions. Approval of construction documents does
riot authorize the violation of any aaopted code or
ordinance. Receipt of approved Fiala Copy and
conditions is acKnowiedgea:
By: 12 fa
Date:
City of Tukwila
BUILDING DIVISION
REVISIONS
No changes shall be made to the scope
of work witnout prior approval of the
Tukwila Building Division.
NOTE: Revisions will require a new plan
submittal and may include additional plan review.
Asfild,� in��eS
r��
3,
o•ro.�2
Door
T
1
Go'
D�9-o3as
RECEIVED
CITY OF TUKWILA
DEC 0 6 2018
PERMIT CENTER
EVIEVVED FOR
CODE COMPLIANCE
APPROVED
DEC 142018
City Tukwila 4e Tukwi 4e
BUILDING DIVISION
►S-hn11
1,04? siz)in j
Re) .ce, ne tiv
Q
1
'Sec
g00 sili n9teS
VVeolt.n DecX
SCAA. e_ 3/16 =
to
6 K 2
(Ak1 1ula-F��n
?e-9\-
\
Sd'�'9
2+
3I
mak► (AA
‘a
10'
1
Zl'
REVIEWED FOR
CODE COMPLIANCE
APPROVED
DEC 14 2018
City of Tukwila
BUILDING DIVISION
RECEIVED
CITY OF TUKWIL.A
DEC 0 6 2018
PERMIT CENTER
S
p
tv
3/6= 1' oc-oot
to t
i
Oak
20
j-
2-1
Driituj5
1'
REVIEWED FOR
CODE COMPLIANCE
APPROVED
DEC 14 2018
City of Tukwila
BUILDING DIVISION
RECEIVED
CITY OF TUKWILA
DEC 0 6 2018
PERMIT CENTER
WINDOW FLASHING
A GUIDE TO INSTALLATION
METHOD "B"
MECHANICALLY ATTACHED
THIS INSTALLATION GUIDE REFERENCES THE AMERICAN
ARCHITECTURAL MANUFACTURERS ASSOCIATION PUBLICATION 2400-10.
The "Method B" installation guide is
designed for integral flanged window
applications, where the window is
installed before the weather -resistive
barrier is applied.
Fortifiber Building Systems Group'
provides this Window Flashing
Installation Guide to assist installers by
demonstrating an efficient and effective
method for exterior window flashing
installation. Compliance with the build-
ing code and proper installation are crit-
ical in reducing potential water leakage
points.
The following Fortifiber flashing prod-
ucts are acceptable for this method:
i
r�)
Head
Flashing
i�
e
Jamb
Flashing
CO)
Window
Flange •
• Moistop PF® Flashing, 6, 9,12, and 18 inch x 300' rolls
• Moistop neXT ® Flashing, 6, 9, and 12 inch x 200' rolls
• Moistop® Sealant (Exceeds AAMA Standards)
v►vED
t;COM^PLIA .,
PPROVED
Window
DEC 14 2018
City of Tukwila
For further assistance, please call our techjaIRAPOMMON
1
SILL FLASHING
1
Rough opening
for window.
II
I.
1
Sill flashing length 1. 1 I
is RO width
4- (2x flashing I `
width).
1
.1
1 ii
Flush with top
edge of silt
ti , u
Fasten at top°
edge only.
•i
F
Ili
-47 1 rl (i. to
Jamb flashing
length is RO
—' height +
(2x flashing
width, minus 1").
Jamb flashing
hangs even with
bottom of sill
flashing on
both sides.
Attach jamb
flashing: flush
with edge of
;rough opening.
Leave free
at bottom.
1
Cut the sill flashing (the width of the rough opening +
2x the width of the flashing). Mechanically attach the
flashing along the bottom of the rough opening. Be sure
not to fasten the lower edge of the flashing so that a
weather -resistive barrier may be slipped up underneath
the flashing in a weather -board fashion (la).
bg- O�r
Cut the jamb flashing (rough opening height, + 2x the
width of the flashing, minus 1). Align the flashing flush
to the edge of the rough opening and even with the bot-
tom of sill flashing. Attach the jamb flashing at rough
opening (2a). As with the sill flashing, do not fasten the
lower edge of the jamb flashing (2b). Repeat above
steps for the Arg job.
CITY OF TUKWILA
DEC 0 6 2018
:JEHVii.j CENTER
CONTINUED...
CONTINUED FROM FRONT... (METHOD "B")
3 APPLYING SEALANT- WINDOW INSTALLATION
Apply 34" bead of
sealant at sill flange
For proper adhesion
clean all surfaces
that will have sealant
applied to them.
Window
`° " Caulk flange
- - - according to window
manufacturer's instructions.
Continuous -
seal can be
applied directly
to sill and jamb
flashing prior
to installation.
To insure the proper adhesion, wipe the window
flange, sill and jamb flashing with a clean rag
before applying Moistop° Sealant (3a). Prior to
installing the window, apply a continuous 3/8" bead
of Moistop Sealant to the backside (interior) of the
4
HEAD FLASHING
Head flashing
length is Ro;
Width
(2x flashing
idth, plus 2")
- Head flashing
overhangs
jamb flashing
by 1".
Embed
flashing
with"
bead of
sealant on
mounting
flange.
Note: The Length of the head flashing is the width of the
rough opening + 2x the width of the flashing plus 2".
To install the head flashing, apply a continuous 3/e" bead
of Moistop Sealant on the top (head) mounting flange
(4a). Embed the head flashing over the Moistop Sealant,
press the head flashing until the sealant appears at the
bottom edge. When using a self adhesive flashing, sealant
at the head flange is not necessary. Be sure to extend the
flashing beyond each jamb flashing. Fasten in place.
Limitations: FortiFlash", FortiFiasha Butyl and FortiFlash' Commercial are
the only Fortifiber flashing products that can be installed horizontally or at a
slope of less than 60°. Product should be covered as soon as possible. Inspect
product to insure it is free of any protrusions or damage which may compromise
its moisture -resistive properties. Direct exposure of sealant to the adhesive side
of FortiFlash can be detrimental if the amount of sealant exceeds what is
specified above. Please follow these recommendations regarding location and
amount of sealant to be used. Fortifiber strongly recommends against the
practice of using a "knockdown bead of sealant,' or "buttering the flange" with
sealant, because this amount of sealant is excessive and unnecessary.
mounting flange near the outer edge (3b). The
sealant may also be directly applied to perimeter of
the rough opening as long as a continuous seal is
assured (3c). Then install the window according to
manufacturer's instructions.
OVERVIEW
4pply weather -resistive barrier ---
In weatherboafashion.
••
To properly integrate sill
and jamb flashing tuck
the weather -resistive
barrier underneath, --
r'
I
Fortifiber recommends the use
of a well Integrated weather -resistive
rrier,:with all of its flashing systems.
adfrendation refers to the most common
pes of windows used (surface mounted). For
•
s,of frames, special attention should be
Indow,manufacturer's instructions.
tuittei
Call 1-800-773-4777 for Technical Assistance
www.fortifiber.com
21'
Fortifiber Building
Systems Group®
Protecting Your World from the Elements
NATIONAL SALES OFFICE — Fernley, NV
(3120113)
installed
window
Continuous seal
undemeath
flange..
1
To insure the proper adhesion, wipe the window
flange, sill and jamb flashing with a clean rag
before applying Moistop° Sealant (3a). Prior to
installing the window, apply a continuous 3/8" bead
of Moistop Sealant to the backside (interior) of the
4
HEAD FLASHING
Head flashing
length is Ro;
Width
(2x flashing
idth, plus 2")
- Head flashing
overhangs
jamb flashing
by 1".
Embed
flashing
with"
bead of
sealant on
mounting
flange.
Note: The Length of the head flashing is the width of the
rough opening + 2x the width of the flashing plus 2".
To install the head flashing, apply a continuous 3/e" bead
of Moistop Sealant on the top (head) mounting flange
(4a). Embed the head flashing over the Moistop Sealant,
press the head flashing until the sealant appears at the
bottom edge. When using a self adhesive flashing, sealant
at the head flange is not necessary. Be sure to extend the
flashing beyond each jamb flashing. Fasten in place.
Limitations: FortiFlash", FortiFiasha Butyl and FortiFlash' Commercial are
the only Fortifiber flashing products that can be installed horizontally or at a
slope of less than 60°. Product should be covered as soon as possible. Inspect
product to insure it is free of any protrusions or damage which may compromise
its moisture -resistive properties. Direct exposure of sealant to the adhesive side
of FortiFlash can be detrimental if the amount of sealant exceeds what is
specified above. Please follow these recommendations regarding location and
amount of sealant to be used. Fortifiber strongly recommends against the
practice of using a "knockdown bead of sealant,' or "buttering the flange" with
sealant, because this amount of sealant is excessive and unnecessary.
mounting flange near the outer edge (3b). The
sealant may also be directly applied to perimeter of
the rough opening as long as a continuous seal is
assured (3c). Then install the window according to
manufacturer's instructions.
OVERVIEW
4pply weather -resistive barrier ---
In weatherboafashion.
••
To properly integrate sill
and jamb flashing tuck
the weather -resistive
barrier underneath, --
r'
I
Fortifiber recommends the use
of a well Integrated weather -resistive
rrier,:with all of its flashing systems.
adfrendation refers to the most common
pes of windows used (surface mounted). For
•
s,of frames, special attention should be
Indow,manufacturer's instructions.
tuittei
Call 1-800-773-4777 for Technical Assistance
www.fortifiber.com
21'
Fortifiber Building
Systems Group®
Protecting Your World from the Elements
NATIONAL SALES OFFICE — Fernley, NV
(3120113)
3/5/2020
City of Tukwila
Department of Community Development
MIKOLA FRANTSEVICH
12811 35TH AVE S
TUKWILA, WA 98188
RE: Permit No. D18-0385
FRANTSEVICH RESIDENCE
12811 35 AVE S
Dear Permit Holder:
Allan Ekberg, Mayor
Jack Pace, Director
In reviewing our current records, the above noted permit has not received a final inspection by the City of Tukwila Building
Division. Per the International Building Code, International Mechanical Code, Uniform Plumbing Code and/or the National Electric
Code, every permit issued by the Building Division under the provisions of these codes shall expire by limitation and become null
and void if the building or work authorized by such permit has not begun within 180 days from the issuance date of such permit, or if
the building or work authorized by such permit is suspended or abandoned at any time after the work has begun for a period of 180
days. Your permit will expire on 4/29/2020.
Based on the above, you are hereby advised to:
1) Call the City of Tukwila Inspection Request Line at 206-438-9350 to schedule for the next or final inspection. Each
inspection creates a new 180 day period, provided the inspection shows progress.
-or-
2) Submit a written request for permit extension to the Permit Center at least seven(7) days before it is due to expire.
Address your extension request to the Building Official and state your reason(s) for the need to extend your permit.
The Building Code does allow the Building Official to approve one extension of up to 180 days. If it is determined that your
extension request is granted, you will be notified by mail.
In the event you do not call for an inspection and/or receive an extension prior to 4/29/2020, your permit will become null and void
and any further work on the project will require a new permit and associated fees.
Thank you for your cooperation in this matter.
Sincerely,
Bill Rambo
Permit Technician
File No: D18-0385
6300 Southcenter Boulevard Suite #100 • Tukwila, Washington 98188 • Phone 206-431-3670 • Fax 206-431-3665
10/1/2019
City of Tukwila
Department of Community Development
MIKOLA FRANTSEVICH
12811 35TH AVE S
TUKWILA, WA 98188
RE: Permit No. D18-0385
FRANTSEVICH RESIDENCE
12811 35 AVE S
Dear Permit Holder:
Allan Ekberg, Mayor
Jack Pace, Director
In reviewing our current records, the above noted permit has not received a final inspection by the City of Tukwila Building
Division. Per the International Building Code, International Mechanical Code, Uniform Plumbing Code and/or the National Electric
Code, every permit issued by the Building Division under the provisions of these codes shall expire by limitation and become null
and void if the building or work authorized by such permit has not begun within 180 days from the issuance date of such permit, or if
the building or work authorized by such permit is suspended or abandoned at any time after the work has begun for a period of 180
days. Your permit will expire on 11/18/2019.
Based on the above, you are hereby advised to:
1) Call the City of Tukwila Inspection Request Line at 206-438-9350 to schedule for the next or final inspection. Each
inspection creates a new 180 day period, provided the inspection shows progress.
-or-
2) Submit a written request for permit extension to the Permit Center at least seven(7) days before it is due to expire.
Address your extension request to the Building Official and state your reason(s) for the need to extend your permit.
The Building Code does allow the Building Official to approve one extension of up to 180 days. If it is determined that your
extension request is granted, you will be notified by mail.
In the event you do not call for an inspection and/or receive an extension prior to 11/18/2019, your permit will become null and void
and any further work on the project will require a new permit and associated fees.
Thank you for your cooperation in this matter.
Sincerely,
Bill Rambo
Permit Technician
File No: D18-0385
6300 Southcenter Boulevard Suite #100 • Tukwila, Washington 98188 • Phone 206-431-3670 • Fax 206-431-3665
5/2/2019
City of Tukwila
Department of Community Development
MIKOLA FRANTSEVICH
12811 35TH AVE S
TUKWILA, WA 98188
RE: Permit No. D18-0385
FRANTSEVICH RESIDENCE
12811 35 AVE S
Dear Permit Holder:
Allan Ekberg, Mayor
Jack Pace, Director
In reviewing our current records, the above noted permit has not received a final inspection by the City of Tukwila Building
Division. Per the International Building Code, International Mechanical Code, Uniform Plumbing Code and/or the National Electric
Code, every permit issued by the Building Division under the provisions of these codes shall expire by limitation and become null
and void if the building or work authorized by such permit has not begun within 180 days from the issuance date of such permit, or if
the building or work authorized by such permit is suspended or abandoned at any time after the work has begun for a period of 180
days. Your permit will expire on 6/22/2019.
Based on the above, you are hereby advised to:
1) Call the City of Tukwila Inspection Request Line at 206-438-9350 to schedule for the next or final inspection. Each
inspection creates a new 180 day period, provided the inspection shows progress.
-or-
2) Submit a written request for permit extension to the Permit Center at least seven(7) days before it is due to expire.
Address your extension request to the Building Official and state your reason(s) for the need to extend your permit.
The Building Code does allow the Building Official to approve one extension of up to 180 days. If it is determined that your
extension request is granted, you will be notified by mail.
In the event you do not call for an inspection and/or receive an extension prior to 6/22/2019, your permit will become null and void
and any further work on the project will require a new permit and associated fees.
Thank you for your cooperation in this matter.
Sin erely,
GCA a -V ,j ; t�y )
Kandace Nichols
Permit Technician
File No: D18-0385
6300 Southcenter Boulevard Suite #100 • Tukwila, Washington 98188 • Phone 206-431-3670 • Fax 206-431-3665
ire: PERMIT COORD CQP'1
PLAN REVIEW/ROUTING SLIP
PERMIT NUMBER: D18-0385 DATE: 12/6/18
PROJECT NAME: FRANTSEVICH RESIDENCE
SITE ADDRESS: 12811 35 AVE S
X Original Plan Submittal Revision # before Permit Issued
Response to Correction Letter #
Revision # after Permit Issued
DEPARTMENTS:
k 'w c
Building Division
Public Works
A N/4 1)=-0-10
)_1
Fire Prevention 111
Structural
KS D---7-19
Planning Division M
Permit Coordinator
�a
PRELIMINARY REVIEW:
Not Applicable
(no approval/review required)
DATE: 12/11/18
Structural Review Required
REVIEWER'S INITIALS: DATE:
n
APPROVALS OR CORRECTIONS:
Approved
DUE DATE: 1/08/19
Approved with Conditions
Corrections Required Denied
(corrections entered in Reviews) (ie: Zoning Issues)
Notation:
REVIEWER'S INITIALS:
DATE:
Permit Center Use Only
CORRECTION LETTER MAILED:
Departments issued corrections: Bldg ❑ Fire ❑ Ping ❑ PW 0 Staff Initials:
12/18/2013
CITY OF TUKWILA
Department of Community Development
6300 Southcenter Boulevard, Tukwila, WA 98188
Telephone: (206) 431-367o FAX (206) 431-3665
E-mail: tukplanaci.tukwila.wa.us
Permit Center/Building Division
206 431-3670
Public Works Department
206 433-0179
Planning Division
206 431-3670
AFFIDAVIT IN LIEU OF CONTRACTOR REGISTRATION
STATE OF WASHINGTON)
) ss.
COUNTY OF KING )
[please print name]
, states as follows:
PERMIT NO: jJ I J O 3al'
1. I have made application for a permit from the City of Tukwila, Washington.
2. I understand that state law requires that all building construction contractors be registered with the
State of Washington. The exceptions to this requirement are stated under Section 18.27.090 of the
Revised Code of Washington, a copy of which is printed on the reverse side of this Affidavit. I have
read or am familiar with RCW 18.27.090.
3. I understand that prior to issuance of a permit for work which is to be done by any contractor, the
City of Tukwila must verify either that the contractor is registered by the State of Washington, or that
one of the exemptions stated under RCW 18.27.090 applies.
4. In order to provide verification to the City of Tukwila of my compliance with this requirement, I
hereby attest that after reading the exemptions from the registration requirement of RCW 18.27.090,
I consider the work authorized under this permit to be exempt under number , and will therefore
not be performed by a registered contractor.
5. I understand that the licensing provision of RCW 19.28.161 through 19.28.271 shall not apply to
persons making electrical installations on their own property or to regularly employed employees
working on the premises of their employer. The proposed electrical work is not for the construction
of a new building for rent, sale or lease.
I understand that I may be waiving certain rights that I might otherwise have under state law in any decision
to engage an unregistered contractor to perform construction work.
Signed and sworn to before me this
!976'1 day of I >CtotAlj£' E , 20l -
NOtAY PUBLIC in and for the State of Washington
Residing at
, County
Name as commissioned:
My commission expires: 6 5,69/3g-
tJ
18.27.090 Exemptions. The registration provisions of this chapter do not apply to:
1. An authorized representative of the United States
government, the state of Washington, or any incorporated
city, town, county, township, irrigation district, reclamation
district, or other municipal or political corporation or
subdivision of this state;
2. Officers of a court when they are acting within the scope
of their office;
3. Public utilities operating under the regulations of the
utilities and transportation commission in construction,
maintenance, or development work incidental to their own
business;
4. Any construction, repair, or operation incidental to the
discovering or producing of petroleum or gas, or the
drilling, testing, abandoning, or other operation of any
petroleum or gas well or any surface or underground mine
or mineral deposit when performed by an owner or lessee;
5. The sale of any finished products, materials, or articles of
merchandise that are not fabricated into and do not become
a part of a structure under the common law of fixtures;
6. Any construction, alteration, improvement, or repair of
personal property performed by the registered or legal
owner, or by a mobile/manufactured home retail dealer or
manufacturer licensed under chapter 46.70 RCW who shall
warranty service and repairs under chapter 46.70 RCW;
7. Any construction, alteration, improvement, or repair
carried on within the limits and boundaries of any site or
reservation under the legal jurisdiction of the federal
government;
8. Any person who only furnished materials, supplies, or
equipment without fabricating them into, or consuming
them in the performance of, the work of the contractor;
9. Any work or operation on one undertaking or project by
one or more contracts, the aggregate contract price of
which for labor and materials and all other items is less
than five hundred dollars, such work or operations being
considered as of a casual, minor, or inconsequential nature.
The exemption prescribed in this subsection does not apply
in any instance wherein the work or construction is only a
part of a larger or major operation, whether undertaken by
the same or a different contractor, or in which a division of
the operation is made into contracts of amounts less than
five hundred dollars for the purpose of evasion of this
chapter or otherwise. The exemption prescribed in this
subsection does not apply to a person who advertises or
puts out any sign or card or other device which might
indicate to the public that he or she is a contractor, or that
he or she is qualified to engage in the business of
contractor;
10. Any construction or operation incidental to the
construction and repair of irrigation and drainage ditches
of regularly constituted irrigation districts or reclamation
districts; or to farming, dairying, agriculture, viticulture,
horticulture, or stock or poultry raising; or to clearing or
other work upon land in rural districts for fire prevention
purposes; except when any of the above work is performed
by a registered contractor;
11. An owner* who contracts for a project with a registered
contractor, except that this exemption shall not deprive the
owner of the protections of this chapter against registered
and unregistered contractors. The exemption prescribed in
this subsection does not apply to a person who performs
the activities of a contractor for the purpose of leasing or
selling improved property he or she has owned for less than
twelve months;
12.* Any person working on his or her own property,
whether occupied by him or her or not, and any person
working on his or her personal residence, whether owned
by him or her or not but this exemption shall not apply to
any person who performs the activities of a contractor on
his or her own property for the purpose of selling,
demolishing, or leasing the property;
13. An owner* who performs maintenance, repair, and
alteration work in or upon his or her own properties, or
who uses his or her own employees to do such work;
14. A licensed architect or civil or professional engineer
acting solely in his or her professional capacity, an
electrician certified under the laws of the state of
Washington, or a plumber certified under the laws of the
state of Washington or licensed by a political subdivision of
the state of Washington while operating within the
boundaries of such political subdivision. The exemption
provided in this subsection is applicable only when the
person certified is operating within the scope of his or her
certification;
15. Any person who engages in the activities herein
regulated as an employee of a registered contractor with
wages as his or her sole compensation or as an employee
with wages as his or her sole compensation;
16. Contractors on highway projects who have been
prequalified as required by RCW 47.28.070, with the
department of transportation to perform highway
construction, reconstruction, or maintenance work;
17. A mobile/manufactured home dealer or manufacturer
who subcontracts the installation, set-up, or repair work to
actively registered contractors. This exemption only applies
to the installation, set-up, or repair of the
mobile/manufactured homes that were manufactured or
sold by the mobile/manufactured home dealer or
manufacturer; t+°'•
/,�+
18. An entity who.holds a valid electrical contractor's
license under chapter 19.28 RCW that employs a certified
journeyman electiacian;a certified residential specialty
electrician, or an electrical trainee meeting the
requirements of chapter19.28.RCW t9 perform plumbing
work that is incidentally; directly, and immediately
appropriate to the like=in-kind replacenpiit of a household
appliance or other small Household utilization equipment
that requires limited electric power and limited waste
and/or water connections. An electrical trainee must be
supervised by a certified electrician while performing
plumbing work.
• Per Washington State Department of Labor and Industries lessee has
been interpreted to be equivalent to owner for purposes of exemptions.