Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
Permit M18-0052 - TACO BELL - GAS/ELECT RTU REPLACEMENTS
TACO BELL 16350 WEST VALLEY HWY MI 8-0052 Parcel No: Address: City of Tukwila Department of Community Development 6300 Southcenter Boulevard, Suite #100 Tukwila, Washington 98188 Phone: 206-431-3670 Inspection Request Line: 206-438-9350 Web site: http://www.TukwilaWA.eov MECHANICAL PERMIT 2523049083 Permit Number: M18-0052 16350 WEST VALLEY HWY Project Name: TACO BELL Issue Date: 10/22/2018 Permit Expires On: 4/20/2019 Owner: Name: Address: Contact Person: Name: Address: Contractor: Name: Address: License No: Lender: Name: Address: NWR REALTY LLC 18815 139TH AVE NE C/O NORTHWEST RESTUARANTS, WOODINVILLE, WA, 98072 JESSE SIMENSON PO BOX 29116 , BELLINGHAM, WA, 98228 NORTHSOUND REFRIGERATION INC PO BOX 29116 , BELLINGHAM, WA, 98228 NORTHRI898CG Phone: (360) 380-1381 Phone: (360) 380-1381 Expiration Date: 2/7/2019 DESCRIPTION OF WORK: REMOVAL AND REPLACEMENT OF 1 EXISTING 7.5 TON GAS/ELECT RTU (LOBBY) AND 1 EXISTING 12.5 TON GAS/ELECT RTU (KITCHEN) Valuation of Work: $30,647.00 Type of Work: REPLACEMENT Fuel type: GAS Fees Collected: $614.10 Electrical Service Provided by: PUGET SOUND ENERGY Water District: TUKWILA Sewer District: TUKWILA Current Codes adopted by the City of Tukwila: International Building Code Edition: International Residential Code Edition: International Mechanical Code Edition: Uniform Plumbing Code Edition: International Fuel Gas Code: 2015 2015 2015 2015 2015 National Electrical Code: WA Cities Electrical Code: WAC 296-46B: WA State Energy Code: 2017 2017 2017 2015 klPermit Center Authorized Signature:kizI �L I hearby certify that I have read and examined this permit and know the same to be true and correct. All provisions of law and ordinances governing this work will be complied with, whether specified herein or not. The granting of this permit does not presume to give authority to violate or cancel the provisions of any other state or local laws regulating construction or the performance of work. I am authorized to sign and obtain this development permit and agree to the conditions attached to this permit. Signature: yex Print Name: arnh I aIUt ct n oryu v Date: 10\ This permit shall become null and void if the work is not commenced within 180 days for the date of issuance, or if -the work is suspended or abandoned for a period of 180 days from the last inspection. PERMIT CONDITIONS: 1: Work shall be installed in accordance with the approved construction documents, and any changes made during construction that are not in accordance with the approved construction documents shall be resubmitted for approval. 2: All permits, inspection record card and approved construction documents shall be kept at the site of work and shall be open to inspection by the Building Inspector until final inspection approval is granted. 3: Readily accessible access to roof mounted equipment is required. 4: All construction shall be done in conformance with the Washington State Building Code and the Washington State Energy Code. 5: Remove all demolition rubble and loose miscellaneous material from lot or parcel of ground, properly cap the sanitary sewer connections, and properly fill or otherwise protect all basements, cellars, septic tanks, wells, and other excavations. Final inspection approval will be determined by the building inspector based on satisfactory completion of this requirement. 6: All plumbing and gas piping work shall be inspected and approved under a separate permit issued by the City of Tukwila Building Department (206-431-3670). 7: All electrical work shall be inspected and approved under a separate permit issued by the City of Tukwila Permit Center. 8: VALIDITY OF PERMIT: The issuance or granting of a permit shall not be construed to be a permit for, or an approval of, any violation of any of the provisions of the building code or of any other ordinances of the City of Tukwila. Permits presuming to give authority to violate or cancel the provisions of the code or other ordinances of the City of Tukwila shall not be valid. The issuance of a permit based on construction documents and other data shall not prevent the Building Official from requiring the correction of errors in the construction documents and other data. 9: ***MECHANICAL PERMIT CONDITIONS*** 10: All mechanical work shall be inspected and approved under a separate permit issued by the City of Tukwila Permit Center (206/431-3670). 11: Manufacturers installation instructions shall be available on the job site at the time of inspection. 12: The attached set of mechanical plans have been reviewed by The Tukwila Fire Marshals Office and are acceptable with the following concerns: 13: H.V.A.C. units rated at greater than 2,000 cfm require auto -shutdown devices. These devices shall be separately zoned in the alarm panel and local U.L. central station supervision is required. (City Ordinance #2437) 14: H.V.A.C. systems supplying air in excess of 2,000 cubic feet per minute to enclosed spaces within buildings shall be equipped with an automatic shutoff. Automatic shutoff shall be accomplished by interrupting the power source of the air -moving equipment upon detection of smoke in the main return -air duct served by such equipment. Smoke detectors shall be labeled by an approved agency for air -duct installation and shall be installed in accordance with the manufacturer's installation instructions. (IMC 606.1, 606.2.1) 15: Remote indicator lights are required on all above ceiling smoke detectors. (City Ordinance #2437) 7 i 16: Duct detectors shall send a supervisory signal only upon activation. (City Ordinance #2437) 17: All new fire alarm systems or modifications to existing systems shall have the written approval of The Tukwila Fire Prevention Bureau. No work shall commence until a fire department permit has been obtained. (City Ordinance #2437) (IFC 901.2) 18: An electrical permit from the City of Tukwila Building Department Permit Center (206-431-3670) is required for this project. 19: Contact The Tukwila Fire Prevention Bureau to witness all required inspections and tests. (City Ordinances #2436 and #2437) 20: Any overlooked hazardous condition and/or violation of the adopted Fire or Building Codes does not imply approval of such condition or violation. 21: These plans were reviewed by Inspector 511. If you have any questions, please call Tukwila Fire Prevention Bureau at (206)575-4407. PERMIT INSPECTIONS REQUIRED Permit Inspection Line: (206) 438-9350 1400 FIRE FINAL 0703 MECH EQUIP EFF 1800 MECHANICAL FINAL 0705 REFRIGERATION EQUIP 0701 ROUGH -IN MECHANICAL 0702 SMOKE DETECTOR TEST \ CITY OF TUKWILA Community Development Department Permit Center 6300 Southcenter Blvd., Suite 100 Tukwila, WA 98188 http://www.TukwilaWA.gov Mechanical Permit No. Project No. Date Application Accepted: >A1 t 11 Date Application Expires: 0 I n It?) (For office use only) MECHANICAL PERMIT APPLICATION Applications and plans must be complete in order to be accepted for plan review. Applications will not be accepted through the mail or by fax. **please print** SITE LOCATION King Co Assessor's Tax No.: 252304-9083 Site Address: 16350 W Valley HWY Suite Number: Floor: Tenant Name: TACO BELL New Tenant: ❑ Yes ® ..No PROPERTY OWNER Name: Jesse Simenson Name: NWF REALTY LLC City: Ferndale State: WA zip: 98248 Address: 18815 139th Ave NE, Suite C Email: jesse@northsoundrefrigeration.com City: Woodenville, State: WA zip: 98072 CONTACT PERSON — person receiving all project communication Name: Jesse Simenson Address: 6188 Portal Way City: Ferndale State: WA zip: 98248 Phone: 360-380-1381 Fax: 360-380-1386 Email: jesse@northsoundrefrigeration.com MECHANICAL CONTRACTOR INFORMATION Company Name: Northsound Refrigeration Address: 6188 Portal Way City: Ferndale State: WA Zip: q�ZyB Phone: 360-380-1381 Fax: 360-380-13867 Contr Reg No.: NORTHRI898CG Exp Date: 2-7-2019 Tukwila Business License No.: BUS -0994376 Valuation of project (contractor's bid price): $ 30,647.00 Describe the scope of work in detail: Removal and Replacement of 1 existing 7.5 ton gas/elect RTU( Lobby) and 1 existing 12.5 ton gas/elect RTU (Kitchen) Use: Residential: New ❑ Replacement ❑ Commercial: New ❑ Replacement Fuel Type: Electric ❑ Gas Other: R:\Applications'Forms-Applications On Line\2016 Applications\Mechanical Permit Application Revised 1-4-16.docx Revised: January 2016 bh Page 1 of 2 Indicate type of mechanical work being installed and the quantity below: Unit Type Qty Furnace <100k btu Residential, Nighttime Furnace >100k btu 2 Floor furnace 55 dB(A) Suspended/wall/floor mounted heater 57 dB(A) Appliance vent Commercial Repair or addition to heat/refrig/cooling system 47 dB(A) Air handling unit 65 dB(A) <10,000 cfm 60 dB(A) Unit Type Qty Air handling unit Residential, Nighttime >10,000 cfm Industrial Evaporator cooler 55 dB(A) Ventilation fan connected to single duct 57 dB(A) Ventilation system Commercial Hood and duct 47 dB(A) Incinerator — domestic 65 dB(A) Incinerator — comm/industrial 60 dB(A) Unit Type Qty Fire damper Residential, Nighttime Diffuser Industrial Thermostat 55 dB(A) Wood/gas stove 57 dB(A) Emergency generator Commercial Other mechanical equipment 47 dB(A) 60 dB(A) 65 dB(A) Boiler/Compressor Qty 0-3 hp/100,000 btu 3-15 hp/500,000 btu 15-30 hp/1,000,000 btu 30-50 hp/1,750,000 btu 50+ hp/1,750,000 btu Noise: Mechanical units need to be in compliance with the Tukwila Noise Code. Maximum permissible sound levels are based on from where the sound is created and where the sound is heard. Additionally, if sound can be heard from within a house at night in a residential zone it may not be allowed. For more details, see TMC 8.22 District of Sound Producing Source District of Receiving Property Residential, Daytime* Residential, Nighttime Commercial Industrial Residential 55 dB(A) 45 dB(A) 57 dB(A) 60 dB(A) Commercial 57 dB(A) 47 dB(A) 60 dB(A) 65 dB(A) Industrial 60 dB(A) 50 dB(A) 65 dB(A) 70 dB(A) *Daytime means 7AM-10PM, Monday through Friday and 8AM-10PM, Saturday, Sunday and State -recognized holidays. A few sounds are exempt from the noise code, including: • Warning devices; • Construction and property maintenance during the daytime hours (7am-lOpm); • Testing of backup generators during the day. PERMIT APPLICATION NOTES - Value of construction — in all cases, a value of construction amount should be entered by the applicant. This figure will be reviewed and is subject to possible revision by the permit center to comply with current fee schedules. Expiration of plan review — applications for which no permit is issued within 180 days following the date of application shall expire by limitation. The building official may grant one extension of time for additional periods not to exceed 90 days each. The extension shall be requested in writing and justifiable cause demonstrated. Section 105.3.2 Intemational Building Code (current edition). I HEREBY CERTIFY THAT I HAVE READ AND EXAMINED THIS APPLICATION AND KNOW THE SAME TO BE TRUE UNDER PENALTY OF PERJURY BY THE L S OF THE STATE OF WASHINGTON, AND I AM AUTHORIZED TO APPLY FOR THIS PERMIT. BUILDING OWN Signature: Print Name: Jesse Sim RIZED AGENT: 1 Mailing Address: 6188 Portal Way Date: 3-30-2018 Day Telephone: 360-599-5359 Ferndale WA 98248 City H:\Applications\Forms-Applications On Line\2016 Applications\Mechanical Permit Application Revised 1-4-16.docx Revised; January 2016 bh State Zip Page 2 of 2 Cash Register.Receip ti City of Tukwila Receipt Number R1'4457 DESCRIPTIONS ACCOUNT QUANTITY " PermitTRAK ' PAID $493.16 M18-0052 Address: 16350 WEST VALLEY HWY Apn: 2523049083 $493.16 MECHANICAL $469.68 PERMIT ISSUANCE BASE FEE R000.322.100.00.00 0.00 $33.15 PERMIT FEE R000.322.100.00.00 0.00 $436.53 TECHNOLOGY FEE $23.48 TECHNOLOGY FEE TOTAL FEES PAID BY RECEIPT: R14457 R000.322.900.04.00 0.00 $23.48 $493.16 Date Paid: Wednesday, May 09, 2018 Paid By: NORTHSOUND REFRIGERATION Pay Method: CHECK 20190 Printed: Wednesday, May 09, 2018 4:06 PM 1 of 1 SYSTEMS ash Register Receipt City of Tukwila Receipt Number R14273 -2908, DESCRIPTIONS ACCOUNT QUANTITY PAID $120.94 PermitTRAK M18-0052 Address: 16350 WEST VALLEY HWY Apn: 2523049083 $120.94 Credit Card Fee $3.52 Credit Card Fee R000.369.908.00.00 0.00 $3.52 MECHANICAL $117.42 PLAN CHECK FEE TOTAL FEES PAID BY RECEIPT: R14273 R000.322.102.00.00 0.00 $117.42 $120.94 Date Paid: Tuesday, April 17, 2018 Paid By: JESSE SIMENSON Pay Method: CREDIT CARD 174531 Printed: Tuesday, April 17, 2018 11:46 AM 1 of 1 r7. SYSTEMS INSPECTION RECORD Retain a copy with permit INSPECTION NO. PERMIT NO. CITY OF TUKWILA BUILDING DIVISION 6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431-3670 Permit Inspection Request Line (206) 438-9350 M1-asz P.15245. r tAco i eL L 7Npe.of Inspection:, ,f,j Add/6)350 rees-f Vai � C Date . ted: L 7 -� , cam: Special Instructions: s `Q` �`E'S� V- rn\ 'Saul* EFF * P1� i,T, 7+- e4,-- ill/ fr R ii : M- . p.m. Requester: Phone No: Approved per applicable codes.Ei X Corrections required prior to approval. COMMENTS: __444/14 /frr-voc Inspector: (D ` / REINSPECTION FEE REQUIRED. Prior to next inspection. fee must be paid at 6300 Southcenter Blvd.. Suite 100. Call to schedule reinspection. 4►10 � I.of3�3'C t rU ISER3.';','` F► #moi• FOR: ❑ Mechanical FifElectricat el 'Plumbing EfGas Piping City of Tukwila BUILDING DIVISION EF -2 Rev izEc FA 4 F Wag 5 t3 oTZ.1�.EL 't;'u -' - Fc. t2. ext+ FA.,J —+- 7 ME COPY milt ©o 1\A1(b- 0W--- Ian retsew >4 r :iv .! is subject to errors and omissions. pprova i of construction documents does not authorize he violation o' any adopted or ordinance. Receipt f approved Field Copy = d o • itions is acknowledged: By.�ow So 57-a /OP- El2Utag City of Tu BUILDING DIVISION 3e11 3e! ---c) RE rfIS!ONS No changes shF !1 ho made to the ;code of work prior approval of Tuklmila Building Division. ! NOTE: Revisions will require a new plan submittal and may n 'ude additional plan review fees REVIEWED 1-014— CODE COMPLIANCE APPROVED MAY 01 201 tigof Tukw' a BUILING DIVISION RECEIVED CITY OF TUKWILA A?R 17 2018 PERMIT CENTER Mile 609 x? '!Y CJ LL 1,0 W 0 PERMIT CENTER 43 Honeywell VisionPRO® 8000 with RedLINKTM APPLICATION RedLINK VisionPRO is a 7 -Day programmable thermostat with auto changeover that is designed for single stage and multistage control of conventional and heat pump equipment such as rooftop units and split systems in residential and commercial applications. RedLINK VisionPRO can be used with or without an equipment interface module. The thermostat controls up to 3 heat / 4 cool conventional systems and up to 4 heat / 2 cool heat pump systems. The thermostat controls humidification, dehumidification, ventilation, an economizer and a lighting panel. Universal sensor inputs are used with remote indoor air temperature sensor(s), an outdoor air temperature sensor, a discharge air temperature sensor, a return air temperature sensor, an occupancy sensor for remote setback and dry contact devices for displaying alerts. • The thermostat is equipped with a touchscreen display with a 2 line message center. • Provides a microSD card port to upload Dealer Information, Custom Reminders, Custom Event Schedules, Holiday Schedule and Software Updates and to download Data Logs. Provides remote access to the thermostat when used with the • RedLINK internet gateway. • Provides control using optional remote sensors. • Thermostat integrates with the Niagara SPECIFICATIONS Terminal Designations: Equipment Interface Module: R, RC, RH, t AUX 2, Y, Y2, G, A-L/A, U1 U1, U2 U2, S3, S4 S4, A, B, C, D TH8321 Thermostat: R. RC, C, W-O/B, W U1 U1, S1 S1 Electrical Ratings (for VisionPRO and Equipment Interface Module): Terminal Voltage (50/60 Hz) Max. Current Rating W - O/B 18 to 30 VAC and 750 mVDC 1.00A Y (cooling) 18 to 30 VAC 1.00A G (fan) 18 to 30 VAC 0.50A W2 - Aux 1 (heating) 18 to 30 VAC 0.60A W3 - Aux 2 (heating) 18 to 30 VAC 0.60A Y2 (cooling) 18 to 30 VAC 0.60A A -UA (Output) 18 to 30 VAC 1.00A (U1, U1), (U2, U2). (U3, U3) 30 VAC max. 0.50A Power Consumption of TH8321/TH8320/TH8110 Thermostat: Backlight on: 1.44 VA Backlight off: 1.32 VA Power Consumption of Equipment Interface Module: 2.0 VA RedLINK Communication: ( equency: 900 Mhz frequency range e��R1 i FOR Re`SyncTime: RedLINK devices re-establish communication IVII IANCE within 6 minutes after AC power resumes. iAX framROVED MAY 01 2018 Te nperature Setting Range: Haating: 40 to 90 °F (4.5 to 32 °C) Cgoling: 50 to 99 °F (10 to 37 °C) Te-nperature Sensor Accuracy: ± 1.5 °F at 70 °F (0.75 °C at 21.0 °C) W -0/B W2 -AUX 1, W3- Ht midification Setting Range: 10% to 60% RH J3 U3, Olt?, f TUIONila ADehumidification Setting Range: 40% to 80% RH A�, 1irpNC-,�,I�/ISIONIIt midity Display Range: 0% to 99% Humidity Sensor Accuracy: ± 5% RH from 30% to 50% RH at 75 °F (24 °C) TH8320 Thermostat: R, RC, C, W-O/B, W2-AUX/E, Y, Y2, G. A-L/A, K, S1 S1 TH8110 Thermostat: R. RC, C. W-O/B, Y, G, K, S1 S1 Cool Indication: �rr*+ k� �rr, Displays "Cool On" when thaharraelttthukIS the cooling on. CITY OF TUKWILA AR 1 7 2018 Job Name Engineer Mechanical Contractor Contractor's P.O. No. Representative Notes Model(s) TH8321R1001 ❑ TH8320R1003 0 THB110R1008 ❑ THM5421R1021 ❑ Approval Service Tag No. PtRMIT CENTER 111111 11 0 11 111111 olio td1I'd- OO2..� SPECIFICATIONS (CONTINUED) Heat Indication: Displays "Heat On" when the thermostat turns the heating on. Auxiliary Heat Indication: Displays "Aux Heat On" when the thermostat turns the auxiliary heat on. Interstage Differential: Comfort: The thermostat keeps the indoor temperature within 1 degree of the setpoint (droop less control). The thermostat turns on stage 2 when the capacity on stage 1 reaches 90%. When the interstage differential is set to 1.0 or higher, the thermostat stages the equipment based on how far the indoor temperature is from the setpoint. Clock Accuracy: 1 minute per month at 77 'F (25 °C). ± 2 minutes per month over the operating ambient temperature range. Mounting Means: Thermostat mounts directly on the wall in the living space using mounting screws and anchors provided. Fits a horizontal 2 x 4 in. junction box. Use a cover plate and its mounting bracket to mount the thermostat onto a vertical 2 x 4 in. junction box. Equipment Interface Module (EIM) mounts on HVAC equipment or on a wall in the equipment room. Product Part Number Operating Ambient Temperature Operating Relative Humidity Shipping Temperature Physical Dimensions in in. (mm) Color(s) Thermostat TH8321 R1001 32 to 120 "F 5% to 90% -20 to 120 °F 4-15/16 x 4-5/8 x 1-1/8 Arctic White (0 to 48.9 °C) Non -Condensing (-28.9 to 48.9 °C) (126 x 118 x 29) TH8320R1003 32 to 120 "F 5% to 90% -20 to 120 °F 4-15/16 x 4-5/8 x 1-1/8 Arctic White (0 to 48.9 °C) Non -Condensing (-28.9 to 48.9 °C) (126 x 118 x 29) TH8110R1008 32 to 120 "F 5% to 90% -20 to 120 °F 4-15/16 x 4-5/8 x 1-1/8 Arctic White (0 to 48.9 °C) Non -Condensing (-28.9 to 48.9 °C) (126 x 118 x 29) Equipment YTHM5421 R1010 -40 to 165 °F 5% to 9546 -20 to 165 °F 9-11/32 x 4-53/64 x 1-19/32 Gray Interface THM5421 R1021 (-40 to 73.9 °C) Non -Condensing (-28.9 to 73.9 °C) (237 x 123 x 41) Module Dimensions of thermostat in in. (mm). 4 15/16(126) t ill!II� �I 1 O 0 3 5/16 (84) O 4-5./8 (1 8) 1-118 (29) L.— M34521 + M34521 Automation and Control Solutions Honeywell International Inc. 1985 Douglas Drive North Golden Valley, MN 55422 customer.honeywell.com Dimensions of VisionPRO cover plate in in. (mm). 6 5/32 (156) - 25/32 (20) 1 5-3/4 (146) 1-1/2 (38) 0 /.o M34256 U.S. Registered Trademark © 2013 Honeywell International Inc. 33-00016-01 M.S. 10-13 Printed in United States Dimensions of Equipment Interface Module in in. (mm). M33331 Honeywell l 2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1 Mechanical Summary MECH-SUM 2015 Washington State Energy Code Compliance Forms for Commercial Buildings including R2 & R3 over 3 stories and all R1 Project Information Project Title: TACO BELL #31325 Applicant Information. Provide contact information for individual who can respond to inquiries about compliance form information provided. Company Name: Northsound Refrigeration Company Address: P.O. Box 29116 Applicant Name: Jesse Simenson Applicant Phone: 360-599-5359 vised January 2017 CL 1 018 BLitiiincapat SNILA itia 1 7 2018 PERMIT CENTER Project Description Briefly describe mechanical systems in the text box provided ❑Total Bldg Performance (TBP; This path includes all mandatory provisions per C401.2 Option 2. MECH-SUM, MECH-CHK, and C407 Energy Analysis forms required. • - •L-vvLLJ rvK ❑New Building ❑Building Addition ❑Tenant Improvemen CODEaeOMPLIAtietEn Changes Remove and replace (1) existing.7.5 ton packaged gas/elect roo'+ op unit APPROVEID5 ton p- kaged gas/elect.roof top unit and (2) new curb adapters r-5 `-- MAY 01 2018 • City of Tukwila Design Load Calculations ❑ Load calculation summary ❑ MECH-LOAD-CALC F riBUILDING DIVISION Provide design load calculations for all mechanical systems and equipmen .. _• • .Iing or ventilating needs. If a load calculation summary is provided with the permit documents that includes all applicable compliance information then the MECH-LOAD-CALC form is not required. Mechanical Schedules El Mechanical Plans ❑ MECH-EQ Forms (TBD) Indicate location of equipment compliance information. If provided on plans then MECH-EQ forms are not required, however, include on plans all applicable compliance information listed in MECH-EQ tables. Dedicated Outdoor Air System Requirements and High Efficiency VAV Alternate ❑ DOAS is required per C403.6 effective July 1, 2017 (office, retail, education, library and fire station occupancies) All occupied, conditioned areas shall be served by a DOAS that delivers required ventilation air in a manner that does nj require space conditioning fan operation. Space conditioning fans cycled off when no heating or cooling is required. ED Ventilation provided via natural ventilation per 2015 IMC in lieu of DOAS (C403.6, Exception 1) 0 Ventilation and space conditioning provided by a HEVAV system per C403.7 in lieu of DOAS (C403.6, Exception 2) 0 ❑DOAS included in project, although not required (occupancy not office, retail, education, library or fire station) ❑ DOAS related allowances included in project: Prescriptive vertical fenestration maximum area allowance increased to 40% per C402.4.1.4 with 100% of conditioned floor area in building served by DOAS. Exception to air economizer per C403.3 Exception 1, include MECH-ECONO form. Fan Power 2 Project includes HVAC air distribution systems that provide heating and/or cooling If yes, provide a MECH-FANSYS -SUM form. 0 For one or more systems, the total fan motor nameplate hp of all fans in HVAC system exceeds 5hp. If yes, provide a seperate MECH-FANSYS foram for each HVAC system exceeding the 5 horsepower threshold. Refer to Section C403.2.11 and MECH-FANSYS-DOC for requirements and exceptions. HVAC Hydronic Systems 0 Hydronic chilled water 0 Water -loop heat pump 0 No hydronic systems ❑ 0 Hydronic heating water Geothermal C406 Additional Efficiency Options - Mechanical 0 C406.2 More efficient HVAC equipment and fan systems Requires 90% of heating and cooling capacity to be equipment listed in tables C403.2.3(1)-(9) or air -to -water heat pumps and heat recovery chillers. All equipment listed in tables C403.2.3(1)-(7) must be 15% more efficient than minimum requirements. All stand alone supply, return, and exhaust fans over 1hp must have FEQ 71 and must be ❑ selected within 10% of maximum total or static pressure. C406.6 Dedicated outdoor air system (DOAS) ❑ Requires 90% of conditioned floor area to be served by a DOAS per C403.6 that delivers required ventilation air in a manner that does not require space conditioning fan operation. C406.7 Reduced energy in service water heating Requires 90% of floor area be in occupancy types listed in C406.7.1 and that 60% of annual hot water energy use be provided by heat pump, waste heat recovery or solar water -heating systems. Mlo(W.• 2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1 Mechanical Summary, pg .2 2015 Washington State Energy Code Compliance Forms for Commercial Buildings including R2 & R3 over 3 stories and all R1 MECH-SUM Revised January 2017 Service Water Heating Systems Equipment Type (s) El Hot water heating tank(s) O Instantaneous No service water systems Dedicated boiler Heat exchange from space heat boiler or n central hot water/steam Ostribution Type (s) 0 Circulation System On -demand Commissioning Commissioning is required for: D Mechanical systems per C408.2 0 Service water heating systems per C408.4 If required, commissioning shall be performed for all applicable systems regardless of individual equipment capacity. Exceptions to commissioning requirements: 0 Total output capacity of all mechanical space conditioning systems in the building do not exceed 240,000 Btu/h cooling or 300,000 Btu/h heating. Mechanical systems commissioning not required. 0 Capacity of largest service water heating system in building does not exceed 200,000 Btu/h. Service water heating systems commissioning not required. Low Energy and Semi -Heated Spaces (Note 6 and 7) Space Type Location in Plan(s) Space(s) Served Area Served, square feet Heating Capacity, Btu/h (Note 4) Cooling Capacity, Btu/h {Note 5) Peak Space Conditioning Capacity, Btu/h-sf Compliance Check Notes Note 4 - Provide total installed heating output capacity of systems serving Low Energy or Semi -Heated space(s) in btuh. Note 5 - Provide total installed cooling capacity of system serving Low Energy space(s) in Btu/h. Not allowed for semi -heated spaces. Enter 0 if no cooling. Note 6 - Refer to Section C402.1.1 Low Energy Building. Intalled peak space conditioning capacity, heating or cooling, may not exceed 3.4 Btu/h*sf. Note 7 - Refer to Section C402.1.1.1 and Semi -Heated Space definition in Chapter 2. Total heating output capacity may not exceed 8 Btu/h*sf. Only systems without electric resistance heating and no cooling are eligible for the wall insulation exception under semi -heated. 2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1 - Page 5 of 20 Mechanical Permit Plans Checklist MECH-CHK 2015 Washington State Energy Code Compliance Forms for Commercial Buildings including R2 & R3 over 3 stories and all R1 Revised January 2017 Project Title: TACO BELL#31325 Date 4/16/2018 The following information is necessary to check a permit application for compliance with the mechanical systems and equipment requirements of the Washington State Energy Code, Commercial Provisions. Applicable (yes,no,na) Code Section Code Provision Information Required - Must be in permit documents Location in Documents Building Department Notes Equipment - Sizing, Performance and Type NA C403.1 Exempt process equipment Identify equipment to be used in manufacturing, industrial or commercial processes that do not provide space conditioning; identify provisions applicable to this equipment per C403.1 exception Yes C403.2.1 Load calculations Provide load calculations performed per ASHRAE Std 183 or equivalent, using design parameters per C302 and Appendix C; include load adjustments to account for energy recovery NREC Doc Yes C403.2.2 Equipment and system sizing Indicate that output capacities of heating and cooling equipment and systems are no greater than the smallest available equipment size that exceeds the calculated loads; note exceptions taken Equip. Spec Yes C403.2.3 C403.2.3.2 C403.2.13.1 HVAC equipment performance requirements (efficiency) Provide equipment schedules on plans or complete MECH-EQ forms indicating type, capacity, rated and WSEC minimum efficiencies for all heating and cooling equipment; include supply and OSA cfms and operating hours for all air systems; identify heating and cooling equipment that does not have a corresponding WSEC minimum efficiency (manufacturer rated) Equip spec Yes C405.8 C403.2.14 Electric motor efficiency List all motors >_ 1/12 hp (that are not integral to a rated piece of equipment) in the mechanical or electrical equipment schedules on plans; indicate hp, rpm, number of poles and rated efficiency. or exception applied_ For fractional hp motors (1/12 - 1 hp), indicate whether they are an electronically commutated motor, have rated efficiency of at least 70%, or exception taken Equip. Spec Yes C403.2.11.1 Fan power limitation For all HVAC fan systems that provide heating and / or cooling, provide system total nameplate hp in MECH-FANSYS-SUM form For all applicable HVAC systems with total fan motor hp > 5hp, verify fan system motor hp or bhp complies with fan power limits per equations in Table C403.2.11.1(1), provide MECH- FANSYS form for each system Equip spec NA C403.2.11.2 Motor nameplate hp For all applicable HVAC systems with total fan motor hp > 5hp, indicate fan motors specified are the smallest available motor hp size greater than fan bhp, note exceptions taken NA C403.2.11.3 Fan efficiency For all applicable HVAC systems with total fan motor hp > 5hp, identify in equipment schedule all fans required to comply with fan efficiency grade and indicate rated FEG is > 67, or exception taken; indicate these fans are sized so total efficiency is within 15% of the fan maximum total efficiency C403.2.11.4 Group R occupancy exhaust fan efficacy For all exhaust fans < 400 cfm in Group R occupancies, indicate in equipment schedule the fan flow rate and efficacy_(cfm/watt), or exception taken; refer to Table C403.2.11.4 (CE -57) NA C403.2.13 Variable flow capacity - fans For fan motors > 7.5 hp, indicate method of variable flow control (VSD or equivalent method) in equipment schedule, or exception taken; for equivalent method for an HVAC system refer to HVAC System Controls for additional requirements NA C403.2.3 Maximum air cooled chiller capacity For chilled water plants and buildings with > 500 tons of cooling capacity, indicate air-cooled chiller capacity is 5. 100 tons, or exception taken NA C403.4 Large capacity cooling systems For buildings with > 300 tons of cooling capacity, indicate method of multi -stage or variable capacity control (VSD, multiple staged compressors, or max capacity of any single unit < 66% of the total) . NA C403.2.3.1 Non-standard water-cooled centrifugal chillers For water-cooled centrifugal chillers not designed for operation at standard conditions, provide calculations documenting maximum full load and part load rated equipment performance requirements NA C403.2.13.1 C403.4.3.2 Centrifugal fan open -circuit cooling towers For open -circuit centrifugal fan cooling towers with > 1,100 gpm capacity, indicate cooling towers comply with efficiency requirements for axial fan open circuit cooling towers NA C403.4.2 C403.4.2.5 Large capacity boiler systems For single boilers with > 500,000 Btu/h capacity, indicate multi -stage or modulating burner For boiler system (single or multiple) with > 1,000,000 Btu/h capacity, indicate turndown ratio per Table C403.4.2.5 and method (multiple single input boilers, modulating boilers, or combination) NA C403.2.13 Variable flow capacity - pumps For pump motors > 7.5 hp, indicate method of variable flow control (VSD or equivalent method) in equipment schedule, or exception taken; for equivalent method for a hydronic system refer to Hydronic System Controls for additional requirements NA C403.2.3 Gas and oil -fired forced air furnace and unit heaters For forced air furnaces with capacity > 225,000 Btu/h and all unit heaters, indicate in equipment schedule intermittent ignition or IID, flue or draft damper, and rated jacket loss NA C403.2.4.8 Combustion heating equipment For combustion heating equipment with output capacity > 225,000 Btu/h, indicate modulating or staged combustion control NA C403.2.3.3 Packaged electric heating / cooling equipment Verify all packaged electric equipment with > 6,000 Btu/h cooling capacity and any amount of heating is a heatpump.„ include in equipment schedules NA C403.2.12 Heating outside a building Indicate systems providing heating in non -enclosed outdoor occupied spaces are radiant systems; refer to HVAC System Controls for additional requirements NA C403.2.7.1 Kitchen exhaust hoods Indicate on plans the type, duty and exhaust air rate of each kitchen hood, refer to HVAC System Controls for additional requirements NA C403.2.4.3 Outdoor supply air, exhaust and relief dampers Indicate locations of OSA intake, and exhaust and relief outlet dampers on plans; indicate whether dampers are Class 1 motorized, or gravity and exception taken (include leakage rating, cfm/sf); refer to HVAC System Controls for additional requirements for OSA dampers NA C403.2.4.3 Return air dampers Indicate locations of return air dampers that are integral to economizer operation; verify dampers are motorized; indicate whether dampers are Class 1, or within packaged equipment eligible for leakage rating exception (include leakage rating, cfm/sf) NA C403.2.4.3 Stairway and shaft vent dampers Indicate location of stairway and shaft vent dampers on plans; verify dampers are Class 1 motorized; refer to HVAC System Controls for additional requirements NA C403.2.4.4 Zone isolation dampers For systems serving areas > 25,000 sf or spanning more than one floor, that include areas that are expected to be occupied non -simultaneously; identify isolation zone areas on plans and locations of associated isolation dampers in HVAC distribution system; refer to HVAC System Controls for additional requirements NA C403.2.3.4 Humidification For cooling systems with humidification equipment that are also required to have air economizer, indicate humidifier is adiabatic (direct evaporative or fog atomization), or exception taken 2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1 - Page 6 of 20 Mechanical Permit Plans Checklist MECH-CHK 2015 Washington State Energy Code Compliance Forms for Commercial Buildings including R2 & R3 over 3 stories and all R1 Revised Ja Project Title: TACO BELL#31325 Date 4/16/2018 The following information is necessary to check a permit application for compliance with the mechanical systems and equipment requirements of the Washington State Energy Code, Commercial Provisions. Applicable (yes,no,na) Code Section Code Provision Information Required - Must be in permit documents Location in Documents Building Department Notes Additional Efficiency Package Option, More Efficient HVAC Equipment & Fan Performance - Must comply with all 3 provisions to be eligible NA C406.2.1 C403.2.3 HVAC system selection To comply with additional efficiency package option, calculate the percentage of heating and cooling equipment in the project (based on output capacity) that do not have a corresponding WSEC listed efficiency; shall be less than 10% to comply NA C406.2.2 C403.2.3 Minimum equipment efficiency To comply with additional efficiency package option, indicate that all listed heating and cooling equipment have a rated efficiency that exceeds WSEC listed efficiency by at least 15% NA C406.2.3 C403.2.11.3 Minimum fan efficiency To comply with additional efficiency package option, indicate rated FEG of stand alone fans is >_ 71; indicate these fans are sized so the fan efficiency at design conditions is within 10% of the maximum total or static efficiency HVAC System Controls Yes C403.2.4.1 Thermostatic controls (thermostats and humidistats) Indicate locations of thermostatic and humidity control devices and the zones they serve on plans, including perimeter system zones _ Where adjacent (neighboring) zones are controlled by separate thermostats (including perimeter systems used to offset heat gain or loss), and are connected by permanent - openings > 10% of either zone sf area, indicate controls configured to prevent adjacent zones from operating in conflicting modes (one in heat, other in cool); applies to adjacent perimeter zones, adiacent nonperimeter zones, and adiacent perimeter and nonperimeter zones If applying Exception 2 to nonperimeter zones adjacent to perimeter zones, indicate that setpoints and deadband settings in these zones are coordinated so cooling in a nonperimeter zone does not occur until the temperature in that zone is 5°F higher than the adjacent perimeter zone temperature in heating honeywell spec honeywell spec Yes C403.2.4.1.1 Heat pump supplementary heat Indicate staged heating operation with compression as the first stage of heating and supplemental heating controlled with outdoor lock -out temperature set to 40°F or less honeywell spec Yes C403.2.4.1.2 Deadband Indicate zone thermostatic controls configured with 5°F minimum deadband for systems that control both heating and cooling honeywell spec Yes C403.2.4.1.3 Setpoint overlap restriction (thermostats) If separate heating and cooling systems with separate thermostatic control devices are used to serve a zone, indicate locations of both thermostatic control devices and the zone they serve on plans Indicate a limit switch, mechanical stop or DDC control with programming to prevent simultaneous heating and cooling honeywell spec Yes C403.2.4.2 C403.2.4.2.1 C403.2.4.2.2 Automatic setback and shutdown Indicate zone thermostatic controls configured with required automatic setback and manual override functions, setback temperatures, and control method (automatic time clock or programmable controls);_note exceptions taken honeywell spec NA C403.2.4.2.3 Automatic (optimum) start Indicate system controls that adjust equipment start time required to bring each area served up to design temperature just prior to scheduled occupancy NA C403.2.4.3 Outdoor supply air dampers Indicate automatic controls configured to close OSA damper during unoccupied equipment operation; not including economizer cooling, night flush or IMC required OSA / exhaust NA C403.2.4.3 Stairway and shaft vent dampers Indicate method of activation of stairway and shaft vent dampers (fire alarm or interruption of power) NA C403.2.4.4 Zone isolation controls For systems serving areas > 25,000 sf or spanning more than one floor, that include areas that are expected to be occupied non -simultaneously; indicate controls that allow for independent space conditioning of isolation zones; or exception taken NA C403.2.12 Heating outside a building Indicate occupancy sensing or timer switch controls configured to automatically shut off heating system when area served is unoccupied NA C403.2.4.5 Snow melt systems Indicate automatic controls configured to shut off system when pavement temperature exceeds 50°F and no precipitation is falling, and when outdoor air temperature exceeds 40°F NA C403.2.4.6 Freeze protection system controls Indicate automatic controls to shut off system when outdoor temperature exceeds 40°F, or conditions protect fluid from freezing NA C403.2.4.9 Group R1 hotel / motel guest rooms For hotels and motels with over 50 guest rooms, indicate automatic controls serving guest rooms that are capable of setback (heating) and set-up (cooling) of temperature setpoint by at least 5°F; indicate control method - activated by room entry or occupancy sensor 2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1 - Page 7 of 20 Mechanical Permit Plans Checklist MECH-CHK 2015 Washington State Energy Code Compliance Forms for Commercial Buildings including R2 & R3 over 3 stones and all R1 Project Title: TACO BELL #31325 Date 9/16/2018 The following information is necessary to check a permit application for compliance with the mechanical systems and equipment requirements of the Washington State Energy Code, Commercial Provisions. Applicable (yes,no,na) Code Section Code Provision Information Required - Must be in permit documents Location in Documents Building Department Notes NA C403.2.4.10 C403.2.4.11 Group R2 / R3 dwelling units, Group R2 sleeping units For primary space conditioning system, indicate 5-2 programmable thermostats capable of two setback periods per day; for all thermostats indicate purpose (heating only, cooling only, or both), required temperature range and at minimum a 10°F deadband; or exception taken NA C403.2.6 C403.2.11.4 Ventilation Indicate method of ventilation air delivery (natural or mechanical) for each zone If mechanically delivered, indicate that systems are configured to provide not more than 150% of, but at least the minimum required volume of outdoor air to each zone per IMC, ASHRAE 62.1 or other applicable code (WAC, OSHA, etc); or exception taken If delivered via natural ventilation, identify required elements per IMC including minimum openable area to the outdoors or qualifying adjoining spaces NA C403.2.6.2 Demand controlled ventilation Identify spaces > 500 sf with occupant load > 25 people/1,000 sf per IMC; for each space indicate whether it is served by an HVAC system with total design OSA > 3,000 cfm, and / or the system has airside economizer or automatic modulating OSA damper; indicate OSA controls are configured to provide demand controlled ventilation or provide supporting documentation for applied exception NA C403.2.6.3 Occupancy sensors For gyms, classrooms, auditoriums and conference rooms > 500 sf, indicate occupancy -based OSA control when space is unoccupied and method (closes OSA damper or shuts -off equipment); or alternate means provided to automatically reduce OSA when space is partially occupied NA C403.2.6.4 C403.2.6.4.1 Enclosed loading dock ventilation For enclosed loading docks, indicate ventilation / exhaust system method of activation (gas detection system for CO and NO2, or occupancy sensors), and control method (staged or modulating) NA C403.2.6.4 C403.2.6.4.2 Enclosed parking garage ventilation For enclosed parking garages, indicate ventilation / exhaust system activated by gas detection system for CO and NO2, and control method (staged or modulating); or exception taken NA C403.2.7.1 Kitchen exhaust hoods Provide calculations that show a balanced accounting of total kitchen exhaust (include all hoods) with % of: supply air, transfer air from adjacent spaces, and make-up air; if applicable, indicate that direct make-up air to each hood does not exceed 10% of hood exhaust For kitchens with total hood exhaust exceeding 2,000 cfm, indicate exhaust air rate per Table C403.2.7.1 and compliance method (DCV, energy recovery, or transfer air that would otherwise be exhausted) NA C403.2.7.2 Laboratory exhaust systems Refer to Systems Requiring Energy Recovery for requirements NA C403.2.13 Variable flow capacity - HVAC system fans For HVAC fan motors >_ 7.5 hp, indicate method of variable flow control (VSD, or equivalent control method that reduces design air volume by 50% at 1/3 static design pressure); note exception taken NA C403.3.1 DX air handler variable cooling control (Under Integrated Economizer) For DX air handlers with economizer and cooling capacity >_ 65,000 Btu/h, indicate number of cooling stages provided and method (multiple compressors and / or variable speed compressors); indicate minimum displacement (capacity reduction) as % of full load Indicate control method (cooling capacity controlled in response to space temperature, space temperature controlled by modulating supply airflow, or both) NA C403.2.11.5 Fan airflow control For DX air handling units with cooling capacity >_ 65,000 Btu/h and evaporative and chilled water air handling units with fan ?. 0.25 hp, indicate whether system is single zone or multiple zone and related control method (cooling capacity controlled in response to space temperature, space temperature is controlled by modulating supply airflow, or both) For mechanical cooling systems (includes DX and chilled water coils) that control cooling capacity in response to space temperature - Provide a minimum of two stages of fan control; indicate minimum fan speed is <_ 66% of full speed drawing <_ 40% of full speed fan power during periods of low cooling or ventilation only For other mechanical cooling systems (includes DX and chilled water coils) that control space temperature by modulating airflow (in lieu of, or in addition to, controlling capacity in response to space temperature) - Provide fan controls for modulating supply airflow; indicate minimum fan speed is <_ 50% of full speed drawing 5 30% of full speed fan power during periods of low cooling or ventilation only: or exception taken _ NA C403.2.4.12 DDC system capabilities Provide central and zone level DDC controls as required based on system application, capacity or size thresholds and other qualification per Table C403.2.4.12.1_ Identify all DDC system input / output control points; indicate capability for trending and graphical display Ducting Systems NA C403.2.8.1 C403.2.8.3 Duct construction Indicate on plans that all ductwork is constructed and sealed per IMC For OSA ductwork, also indicate on plans that ductwork meets air leakage requirements per C402.5 and vapor retarder requirements per the IBC NA C403.2.8.3 Duct pressure classifications Identify location of low, medium and high pressure ductwork on plans NA C403.2.8.3.3 High pressure duct leakage test Indicate high pressure duct leakage testing requirements on plans; provide test results to jurisdiction when completed 2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1 - Page 8 of 20 Mechanical Permit Plans Checklist MECH-CHK 2015 Washington State Energy Code Compliance Forms for Commercial Buildings including R2 & R3 over 3 stories and all R1 v Project Title: TACO BELL#31325 Date 4/16/2018 The following information is necessary to check a permit application for compliance with the mechanical systems and equipment requirements of the Washington State Energy Code, Commercial Provisions. Applicable (yes,no,na) Code Section Code Provision Information Required - Must be in permit documents Location in Documents Building Department Notes NA C403.2.8.1 C403.2.8.2 Duct insulation For supply and return ductwork located in unconditioned space or outdoors, indicate R -value of insulation on ductwork on plans; identify climate zone; note exceptions taken For supply ductwork located in conditioned space, identify if design supply temperature is < 55°F or > 105°F and indicate R -value of insulation on this ductwork on plans; note exception taken For OSA ductwork, shafts and plenums, indicate R -value of insulation on these elements on plans per Table C402.1.3 for steel -framed walls; note exception taken _ Piping Systems na C403.2.9 Piping insulation p g Indicate design temperature range of fluid conveyed in piping and thickness of insulation (in inches) on hydronic piping plans; or exception taken na C403.2.9.1 Piping insulation exposed to weather Indicate method of protection of pipe insulation from damage / degradation on hydronic piping plans Economizers Yes C403.3 Air economizer required Identify in equipment schedules on plans or in MECH-EQ forms all cooling systems requiring air economizer controls Provide MECH-ECONO form indicating systems utilizing air economizer exceptions, including those with water -side economizer in lieu of air economizer; indicate on plans eligible exception(s) taken and measures to comply with exception(s) Equip. Spec Equip. Spec Yes C403.3.1 Integrated economizer operation - air and water Indicate air and water -side economizers are configured for partial cooling operation even where additional mechanical cooling is required to meet the load Equip Spec Yes C403.3.2 Economizer heating system impact - air and water Verify control method of HVAC systems with economizers does not increase building heating energy usage during normal operation Equip. Spec Yes C403.3.3.1 Air economizer capacity Indicate modulating OSA and return air dampers are configured to provide up to 100% OSA for cooling Equip Spec Yes C403.3.1 C403.3.3.2 Integrated air economizer Verify mechanical cooling controls are interlocked with air economizer controls so the outside air damper remains in 100% open position when mechanical cooling is also required to meet the cooling load, until the leaving air temperature is < 45°F For systems with cooling capacity >_ 65,000 Btu/h, verify that control of economizer dampers is not based only on mixed air temperature; or exception taken Equip. Spec Equip Spec Yes C403.3.3.3 Air economizer high limit controls Indicate high limit shut-off control method and required high limit per Table C403.3.3.3 na C403.3.4.1 Water economizer capacity For eligible systems where water -side economizer may be provided in lieu of air economizer, indicate system is capable of 100% design cooling capacity at 50°F db / 45°F wb OSA temperatures na C403.3.4.2 Water economizer maximum pressure drop Indicate pressure drop across precooling coils and heat exchangers in water economizer system do not exceed pressure drop limit na C403.3.1 DX air handling equipment control For DX air handlers with economizer and cooling capacity 2_ 65,000 Btu/h, refer to HVAC System Controls for requirements na C403.2.4.7 DX equipment economizer fault detection and diagnostics For DX air handlers with economizer and cooling capacity >_ 54,000 Btu/h, provide a fault detection and diagnostics (FDD) system to monitor economizer system operation and report faults Systems Requiring Energy Recovery na C403.5.1 Energy recovery (ER) - ventilation / exhaust systems For systems with design OSA > 5,000 cfm, or design supply air cfm and % OSA exceeding the values in Tables C403.5.1(1) or (2), indicate exhaust air ER method; or exception taken with supp•or•ting calculations For rooms served by multiple systems with aggregate design OSA > 5,000 cfm, or aggregate design supply air cfm and % OSA exceeding the values in Tables C403.5.1(1) or (2), indicate exhaust air ER method; or exception taken with supporting calculations_ Indicate ER rated effectiveness that increases OSA enthalpy by >_ 50% based on delta between OSA and return air enthalpies at design conditions na C403.2.7.2 Laboratory exhaust systems (energy recovery) For buildings with total lab exhaust > 5,000 cfm, indicate method of energy recovery used to pre -condition laboratory make-up air; ER effectiveness (min 25°F); or alternative method per exception (VAV exhaust, semi -conditioned makeup, or GERM calculation) na C404.10.4 (under C404.11) Pools and permanent spas exhaust systems (energy recovery) For buildings with pools or spas with water surface area > 200 sf, indicate exhaust air ER method and use of waste heat (preheat ventilation air, pool water or service hot water); or exception taken Indicate ER system has the rated effectiveness and is configured to decrease the exhaust air temperature at design conditions by ? 36°F na C403.5.2 Energy recovery - steam condensate systems For buildings with on-site steam heating systems, indicate condensate water ER For buildings that use off-site generated steam where condensate is not returned to the source, indicate on-site condensate water ER 2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1 - Page 9 of 20 Mechanical Permit Plans Checklist MECH-CHK 2015 Washington State Energy Code Compliance Forms for Commercial Buildings including R2 & R3 over 3 stories and all R1 Revised January 2017 Project Title: TACO BELL #31325 Date 4/16/2018 The following information is necessary to check a permit application for compliance with the mechanical systems and equipment requirements of the Washington State Energy Code, Commercial Provisions. Applicable (yes,no,na) Code Section Code Provision Information Required - Must be in permit documents Location in Documents Building Department Notes For buildings with food service, meat or deli departments that have >_ 500,000 Btu/h of remote refrigeration capacity for coolers / freezers, indicate condenser ER and use of captured energy (service water heating, space heating, or dehumidification reheating) na C403.5.3 Energy recovery - cooler / freezer condensers For buildings with >_ 40,000 sf conditioned floor area and with > 1,000,000 Btu/h of remote refrigeration capacity for coolers / freezers, indicate condenser ER and use of captured energy for service water heating and also for space heating, or dehumidification reheating For buildings with 24-hour operation and with > 1,500,000 Btu/h of heat rejection capacity and na C403.5.4 Energy recovery - condenser systems design service hot water load > 250,000 Btu/h, indicate condenser ER to pre -heat service water; or exception taken. Provide calculations showing the amount of recovered heat that is utilized (60% of peak heat resection load or pre -heat service water to 85°F). Hydronic System Controls For hydronic system pump motors >_ 7.5 hp, indicate method of variable flow control (VSD or 0403.2.13 Variable flow control - equivalent method that requires >_ 30% design wattage at 50% design fluid flow); note na C403.4.2.7 hydronic system exception taken pumps Identify whether hydronic coils have DDC controls and associated manner of pump speed control (differential pressure, zone hydronic demand, etc) For boilers that provide building heating, indicate controls that provide heating water temperature setback based on outdoor temperature For heating and chilled water systems >_ 300,000 Btu/h, indicate systems are configured to C403.2.5 Hydronic system setback automatically reset supply water temperature based upon demand; or exception taken. na 0403.4.2.4 and load controls If system pump motor hp > 3 hp, also indicate controls automatically reduce flow by L. part For chilled water systems (> 300,000 Btu/h, pump motor hp > 3 hp) that serve water-cooled unitary air conditioners, indicate VSD or staged pumps in chilled water system and heat rejection loop that reduce pump flow so that one control valve is nearly wide open, or to - maintain a minimum differential pressure; or exception taken na C403.4.2 Boiler sequencing Indicate automatic controls that sequence operation of multiple boilers na 0403.4.6 Hot gas bypass limitation For cooling equipment with hot gas bypass, provide either multiple step unloading or continuous capacity modulation; indicate bypass capacity per Table C403.4.6 na C403.4.2.2 Two -pipe changeover systems Indicate changeover deadband (min 15°F), heating / cooling mode scheduling and changeover temperature range (limit 30°F) NA C403.4.2.6 Chiller / boiler plant pump isolation Indicate controls are configured to automatically reduce overall plant flow and shut-off flow through individual chillers and boilers when not in use For cooling towers with fan motors z 7.5 hp, indicate VSD and method to adjust fan speed C403.2.13.1.1 Heat rejection equipment - (adjusted based on leaving fluid temperature or condenser temperature / pressure of heat na C403.4.3.1.1 variable flow control rejection device) C403.4.3.1.2 For multiple -cell heat rejection equipment with VSD, indicate controls that ramp all fans in unison na 0403.4.3.3 Heat rejection equipment - cooling tower flow turndown Indicate open -circuit cooling towers with multiple pumps or VSD control are designed so all cells can be run in parallel na C403.4.2.3.1 Water loop heat pump - deadband Indicate capability of central equipment to provide minimum 20°F water supply temperature deadband between heat rejection and heat addition modes; or exception taken Water loop heat pump - Indicate type of cooling tower (open- or closed-circuit) in equipment schedule; indicate method na C403.4.2.3.2.1 heat rejection equipment, Zone 4 used to limit system heat loss when heat rejection is not needed Water loop heat pump - For open- or closed-circuit cooling towers, provide a heat exchanger that separates the cooling na C403.4.2.3.2.2 heat rejection equipment, Zone 5 tower and heat pump loop na C403.4.2.3.3 Water loop heat pump - isolation valves For hydronic heat pump systems with total system power > 10 hp, indicate 2 -way isolation valves on each heat pump and variable flow system control Dedicated Outdoor Air Systems (DOAS) - Optional through 6/30/16, Prescriptive 7/1/2016 For buildings with office, retail, education, library and fire station spaces, identify these spaces na C403.6 Dedicated outdoor air on plans; indicate that ventilation air in each occupied space is provided via a DOAS system; C403.6.3 systems or document compliance with C403.6.3 Impracticality; or exception taken (buildings complying with C402.4.1.4 or C406.6 may not utilize exceptions) Energy recovery ventilation For all DOAS systems, indicate exhaust air ER method; or exception taken with supporting na C403.6.1 with DOAS calculations. Indicate ER rated effectiveness that increases OSA enthalpy by z 50% based on delta between OSA and return air enthalpies at design conditions. Heating / cooling system Indicate equipment associated with the delivery of zone level heating and cooling (fans, hydronic pumps, primary air dampers, etc) are configured to shut off, and central equipment is na C403.6.2 controls with DOAS configured to turn down, when there is no call for heating or cooling in the zone they serve If applying Exception to heating / cooling fans used for air mixing in the space during deadband periods, include fan watts per cfm in equipment schedule 2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1 - Page 10 of 20 Mechanical Permit Plans Checklist MECH-CHK 2015 Washington State Energy Code Compliance Forms for Commercial Buildings including R2 & R3 over 3 stories and all R1 R Project Title: TACO BELL #31325 Date 4/16/2018 The following information is necessary to check a permit application for compliance with the mechanical systems and equipment requirements of the Washington State Energy Code, Commercial Provisions. Applicable (yes,no,na) Code Section Code Provision Information Required - Must be in pernit documents Location in Documents Building Department Notes na C402.4.1.4 C403.6 Increased prescriptive maximum vertical fenestration area with DOAS Indicate that all occupied, conditioned spaces are served by a DOAS per C403.6 Additional Efficiency Package Option, Dedicated Outside Air Systems (DOAS) na C406.6 Building provided with DOAS To comply with additional efficiency package option, indicate that 90% or more of all occupied, conditioned spaces are served by a DOAS per C403.6 Multiple Zone Air Systems na C403.4.4 Air systems serving multiple zones Identify supply air systems serving multiple zones and the zones they serve on plans; indicate whether system is VAV and method of primary air control; or provide supporting documentation for applied exception to VAV na C403.4.4 VAV systems serving multiple zones Provide equipment schedules on plans or MECH-EQ form that list all VAV air terminals and types For each air terminal include: maximum airflow rates for primary supply air during zone peak heating and zone peak cooling; maximum airflow during reheating, recooling or mixing; minimum airflow rate to maintain required ventilation, and the basis for these values; if IMC or ASHRAE 62.1 multiple zone equation is basis for minimum flow rates, provide calculation on Plans na C403.4.4.1 Single duct VAV terminal units Indicate single duct terminal units are configured to reduce primary supply air before reheating or recooling na C403.4.4.2 Dual duct systems - terminal units For systems with separate warm air and cool air ducts, indicate terminal units are configured to reduce the flow from one duct to minimum before mixing with air from the other duct na C403.4.1.1 C403.4.1.2 VAV system static pressure sensors - and DDC set points Indicate locations of duct static pressure sensors on plans; include at least one sensor per major duct branch; verify controller setpoint pressure at each sensor is <_1.2 inch w _g_ For systems with zone level DDC, indicate controls are configured to monitor zone damper positions and reset static pressure setpoint based on the zone requiring most pressure;sensors include control logic that automatically detects and generates an alarm if any zone excessively drives reset logic, and allows building operators to exclude zones from reset logic _ na C403.4.4.3 Multiple -zone VAV system ventilation optimization controls For systems with zone level DDC controls, indicate controls are configured to automatically reduce outdoor airflow in response to changes in system ventilation efficiency; or exception taken na C403.4.4.4 VAV system supply air reset Indicate controls automatically reset supply air temperature in response to building loads or outdoor air temperature; or exception taken Multiple Zone HVAC Systems, High Efficiency VAV - Required for systems utilizing C403.6 DOAS Exception 2, must comply with all 16 provisions na C403.7, Item 1 Air economizer Indicate system is configured for 100% air economizer operation and complies with all related economizer requirements per C403.3 (without economizer exceptions) na C403.7, Item 2 Direct digital controls (DDC) Provide DDC controls for all components of system; identify all DDC system input / output control points; indicate capability for trending and graphical display na C403.7, Item 3 Outdoor airflow measurement and reduction For systems with minimum OSA > 2,500 cfm, indicate outdoor airflow monitoring station that measures OSA intake under all load conditions; indicate control sequence that increases or reduces system OSA cfm based on VAV terminal feedback of ventilation efficiency (per C403.4.4.3 without exceptions) or DCV (per C403.2.6.2) na C403.7, Item 4 Supply airflow measurement For systems with minimum OSA > 2,500 cfm, indicate supply airflow monitoring station capable of measuring supply air delivered to VAV terminals under all load conditions na C403.7, Item 5 Zone isolation and maximum area served Verify maximum area served by a single HEVAV system is <_ 50,000 sf, or one entire floor, whichever is greater; in addition if a system serves > 25,000 sf, that includes areas that are expected to be occupied non -simultaneously, indicate zone isolation controls per C403.2.4.4 na C403.7, Item 6 Interior / exterior zone design supply air temperature Verify that VAV terminals serving interior cooling driven loads are sized per design supply air temperature that is 5°F higher than VAV terminals serving exterior zones na C403.7, Item 7 Maximum air terminal inlet velocity Identify air terminals with minimum primary airflow setpoints > 50% of maximum setpoint in equipment schedule or MECH-EQ form; indicate air terminal inlet velocity does not exceed 900 fpm na C403.7, Item 8 Sequence of operation Indicate DDC system sequences of operation are designed and configured per ASHRAE GPC 36 na C403.7, Item 9 Maximum allowable system brake horsepower Verify fan system bhp is 5 90% of the bhp limit per Option 2 equation in Table C403.2.11.1(1), provide MECH-FANSYS form for each system na C403.7, Item 10 Fan -powered terminal unit motor and control Indicate all series and parallel terminal fans have electronically commutated motors; indicate DDC control system is configured to vary air terminal fan speed as a function of the load; indicate fan speed during periods of low heating, low cooling, or ventilation only is <_ 66% of peak design air flow or provide supporting documentation for applied exception 2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1 - Page 11 of 20 Mechanical Permit Plans Checklist MECH-CHK 2015 Washington State Energy Code Compliance Forms for Commercial Buildings including R2 & R3 over 3 stories and all R1 Revised January 2017 Project Title: TACO BELL #31325 Date 4/16/2018 The following information is necessary to check a permit application for compliance with the mechanical systems and equipment requirements of the Washington State Energy Code, Commercial Provisions. Applicable (yes,no,na) Code Section Code Provision Information Required - Must be in permit documents Location in Documents Building Department Notes na C403.7, Item 11 Application of single duct and fan -powered terminal units Indicate VAV terminal types on plans; verify fan -powered terminal units only serve perimeter zones with envelope loads; verify all other zones are served by single duct terminal units na C403.7, Item 12 Fan -powered terminal unit primary air reset Indicate DDC controls are configured to automatically reset the primary supply air cfm setpoint of all fan -powered terminal units to the minimum required to maintain ventilation during occupied heating or deadband, based upon the VAV air handling unit OSA ventilation fraction na C403.7, Item 13 High occupancy space controls For spaces > 150 sf with occupant density z 25 people / 1000 sf, indicate space is served by a dedicated terminal unit with DCV control that resets terminal unit ventilation setpoint; also indicate occupancy sensor control that automatically reduces minimum ventilation to zero and sets back room heating and cooling setpoints by >_ 5°F na C403.7, Item 14 Dedicated HVAC systems For server, electronic equipment, telecom or similar spaces with cooling loads > 5 W/sf, indicate spaces are served by independent HVAC systems that are separate from HPVAV systems serving rest of building; indicate dedicated HVAC systems have air economizer controls or energy recovery per C403.3 Exception 9 na 0403.7, Item 15 Central plant efficiency Indicate whether systems are served by a high efficiency heating water plant, or a high efficiency chilled water plant If complying via high efficiency heating water plant: Indicate all VAV terminals have hydronic heating coils served by heating water system with either gas-fired boiler(s) with thermal efficiency->_ 90%, air -to -water heat pumps, or heat recovery chillers If complying via high efficiency chilled water plant: Indicate all VAV air handlers have cooling coils served by chillers with rated IPLV efficiency that exceeds WSEC listed IPLV by at least 25% per Table 0403.2.3(7) (note water-cooled IPLV is max, all others are min); indicate smallest chiller or compressor in plant is <_ 20% of total plant capacity, or provide thermal storage sized for 5 20% of total plant capacity na C403.7, Item 16 Fault detection and diagnostics Indicate DDC system includes a fault detection and diagnostics (FDD) system configured to monitor operation and provide fault reporting of required parameters for all VAV air handlers and VAV air terminal units in the HPVAV system HVAC Equipment Energy Use Metering na C409.3.1 HVAC equipment energy use metering For new buildings > 50,000 sf and building additions > 25,000 sf, verify energy use metering of all equipment used to provide space heating and cooling, dehumidification and ventilation will be provided per C409: indicate equipment eligible for exception Documentation and System Specific Requirement To Support Commissioning na C408.2 Scope of mechanical systems commissioning Indicate that all mechanical systems, equipment, and controls for which the WSEC requires control functions and / or configuration to perform specific functions are required to be commissioned; For buildings with ? 240,000 Btu/h total output cooling capacity or >_ 300,000 Btu/h total output heating capacity, indicate that all mechanical systems regardless of individual capacity are required to be commissioned; or provide building heating / cooling capacity calculation demonstrating eligibility for exception na C403.2.10 C408.1.1 0408.1.2 C408.1.4.2 C103.6 Commissioning requirements in construction documents Indicate in plans and specifications that Cx per C408 is required for all applicable mechanical systems; Include general summary with at a minimum of Items 1 thru 4 of the Cx plan per C408.1.2 including: narrative description of activities, responsibilities of the Cx team, schedule of activities including verification of project close out documentation per C103.6, and conflict of interest plan (if required); Include in general summary that a Cx project report or Compliance Checklist (Figure C408.1.4.2) shall be completed by the Certified Cx Professional and provided to the owner prior to the final mechanical inspection. na C408.2.2 Air system and hydronic system balancing Indicate in plans that air and fluid flow rates shall be tested and balanced within the tolerances defined in the specifications; indicate systems shall be balanced in a manner to first minimize throttling losses, then adjusted to meet design flow conditions na C408.2.2.1 Air system balancing devices Indicate devices that provide the capability to balance all supply air outlets, zone terminals and air handling equipment requiring -system balancing na 0408.2.2.2 Hydronic system balancing devices Indicate devices that provide the capability to isolate, balance and measure flow across all hydronic equipment requiring system balancing including heating and cooling coils and pumps na 0408.2.3 Functional performance testing criteria _all Identify in plans and specifications the intended operation of all equipment and controls during modes of operation, including interfacing between new and existing -to -remain systems Project Close Out Documentation na 0103.6 Documentation and project close out submittal requirements Indicate in plans that project close out documentation and training of building operations personnel is required for all mechanical components, equipment and systems governed by this code; indicate close out documentation shall include: record documents, O&M manuals, applicable WSEC compliance forms and calculations 2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1 - Page 12 of 20 Service Water Heating Permit Plans Checklist SWH-CHK 2015 Washington State Energy Code Compliance Forms for Commercial Buildings including R2 & R3 over 3 stories and all R1 Revised January 2017 Project Title: TACO BELL#31325 Date 4/16/2018 The following information is necessary to check a permit application for compliance with the mechanicial systems and equipment requirements of the Washington State Energy Code, Commercial Provisions. Applicable (yes,no,na) Code Section Code Provision Information Required - Must be in permit documents Location in Documents Building Department Notes Equipment - Sizing, Performance and Type NA C404.2 SWH equipment type and efficiency Provide equipment schedule on plans indicating type and capacity; indicate efficiency complies with required federal standard na C404.2.1 High input -rated SWH systems For individual SWH equipment serving an entire building with >_ 1,000,000 Btu/h capacity, indicate thermal efficiency >_ 90%; or exception taken For buildings with aggregate capacity of all SHW equipment >_ 1,000,000 Btu/h (exclude < 100,000 Btu/h equipment from threshold calculation), indicate average capacity weighted thermal efficiency >_ 90%; or exception taken If applying Exception 1 for site -solar or site -recovered energy, provide calculations and source of annual service water heatingenergy use estimate na C404.4 Heat traps Indicate piping connected to equipment have heat traps on supply and discharge na C404.5 Insulation under electric water heater For electric water heaters located in unconditioned spaces or on concrete floors, indicate R-10 insulation under equipment Piping Systems na C404.6 Insulation of piping Indicate thickness of piping insulation on plans per Table C403.2.9; verify insulation is provided - from the water heater to the final fixture in a line, from the inlet / outlet piping at water heater to heat trap (up to 8 feet), and on piping that is heat traced; note exceptions taken na C404.3 Efficient SWH supply piping Indicate method of compliance on plans for all piping runs connecting service hot water source to hot water fixture (maximum pipe length or maximum pipe volume method per Table C404.3.1); provide calculations for all piping runs documenting the total length and / or volume Service Water Heating System Controls na C404.7.1 C404.8 Heated -water circulating systems For circulation systems with dedicated return piping, indicate controls are configured to automatically start pump based on demand for hot water and shut-off pump when there is no demand and when the desired water temperature is met For circulation systems with cold water supply piping serving as the return, indicate controls are configured to automatically start pump based on demand for hot water and shut-off pump when there is no demand, or when temperature of water entering the cold water supply pipe is >_ 104°F na C404.7.2 Heat trace system controls For heat trace systems provided to maintain temperature of service hot water in piping, indicate controls are configured to de -energize system when there is no demand for hot water and when the desired water temperature is met na C404.7.3 Controls for hot water storage For systems with separate water heater and storage tank, indicate controls are configured to limit operation time of pump after end of heating cycle to s 5 minutes na C403.2.13 C403.4.2.7 Variable flow control - pumps For SWH, pool / spa and pressure boosting pump motors >_ 7.5 hp, indicate method of variable flow control (VSD or equivalent method that requires >_ 30% design wattage at 50% design fluid flow); note exception taken Identify basis of pump speed control (differential or static pressure setpoint, pressure, zone load demand, etc) Pools and Permanent Spas - Equipment and Controls (Sections are under C404.11) na C404.10.1 Pool heating equipment efficiency Provide equipment schedule on plans indicating type and capacity for all pool heating equipment; indicate efficiency complies with required federal standard; for heat pump water heaters indicate COP ? 4 na C403.2.13 Variable flow control - pumps Refer to Service Water Heating System Controls na C404.10.1 0404.10.2 Pool heater on / off controls Indicate automatic on / off control based on scheduling and readily accessible on / off switch on heater that operates independent of thermostat setting; note exceptions taken na C404.10.3 Pool covers For all pools and in -ground permanent spas, indicate a vapor retardant cover on plans For all pools and in -ground spas heated to > 90°F, indicate cover shall include insulation >_ R- 12 na C404.10.3 Pool assembly insulation For all pools and in -ground spas heated to > 90°F, Indicate on plans that sides and bottom are provided with insulation > R-12 na C404.12 Energy consumption of portable spas Indicate portable spa complies with Association of Pool and Spa Professionals APSP-14 2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1 - Page 13 of 20 Energy Recovery (ER) Systems - Service Water Heating and Pool Systems C404.10.4 (Section Pools and permanent spas For buildings with pools or permanent spas with water surface area > 200 sf, indicate exhaust air ER method and use of waste heat (preheat ventilation air, pool water or service hot water); na under exhaust s stems y or exception taken C404.11' (energy recovery) Indicate ER system has the rated effectiveness and is configured to decrease the exhaust air temperature at design conditions by ?_ 36°F For buildings with food service, meat or deli departments that have ?_ 500,000 Btu/h of remote refrigeration capacity for coolers / freezers, indicate if condenser ER will be used to pre -heat na C403.5.3 Energy recovery - cooler / freezer condensers service water For buildings with >_ 40,000 sf conditioned floor area and with >_ 1,000,000 Btu/h of remote refrigeration capacity for coolers / freezers, indicate if condenser ER will be used to pre -heat service water For buildings with 24-hour operation and > 1,500,000 Btu/h of heat rejection capacity and na C403.5.4 Energy recovery - condenser systems design SWH load > 250,000 Btu/h, indicate condenser ER to pre -heat service water; or exception taken. Provide calculations showing the amount of recovered heat that is utilized (60% of peak heat resection load or pre -heat service water to 85°F). na C404.10 Drain water heat recovery units For systems incorporating drain water ER, indicate system design complies with CSA B55.2 (or CSA 55.1 for Group R); indicate potable waterside pressure loss at design flow is < 10 psi Service Water Heating Energy Use Metering na C404.9 SWH energy usage in dwelling units For Group R-2 multi -family buildings with central SWH systems, provide metering of hot water energy usage per dwelling unit; indicate metering and data reporting method SWH equipment energy use For new buildings > 50,000 sf and building additions > 25,000 sf, with total SWH equipment na C409.3.2 metering capacity >_ 50 kW (>_ 170,600 Btu/h), verfiy energy use metering of all SWH equipment will be provided per C409 Additional Efficiency Package Option, Reduced Energy Use In Service Water Heating - Must comply with both provisions to be eligible To comply with additional efficiency package option, verify that >_ 90% of the conditioned floor na C406.7.1 Eligible building type area of the building is one or more of the occupancies identified in this section, OR; Provide whole building energy analysis per C407 that demonstrates the SWH load in the building is ? 10% of total building energy loads To comply with additional efficiency package option, provide documentation that verifies >_ 60% of building annual SWH energy is provided by high efficiency sources (heat pump water C406.7.2 heater with COP >_ 3, waste heat recovery, solar water -heating system); na C403.5.4 Load fraction For buildings with 24-hour operation and with > 1,500,000 Btu/h of heat rejection capacity and design service hot water load > 250,000 Btu/h (per C403.5.4); provide documentation that verifies 2 100% of building annual SWH energy is provided by condenser energy recovery or other high efficiency source Documentation and Specific System Requirements to Supporting Commissioning Scope of service water Indicate that all SWH equipment and controls for which the WSEC requires control functions and / or configuration to perform specific functions are required to be commissioned;+D7 na C408.4 heating systems commissioning For buildings where the largest SWH system has ? 200,000 Btu/h total output capacity, indicate that all SWH systems regardless of individual capacity are required to be commissioned. _ Scope of pool and Indicate that all pool and permanent spa water heating systems regardless of individual capacity are required to be commissioned; na C408.4.1.3 permanent spa systems commissioning Indicate that energy recovery equipment that heats pool water regardless of capacity is required to be commissioned; Identify all pool heating and energy recovery equipment and controls that the WSEC defines as being -capable of and / or configured to perform specific functions. Indicate in plans and specifications that Cx per C408 is required for all applicable service water heating systems; C404.13 Include general summary with at a minimum of Items 1 thru 4 of the Cx plan per C408.1.2 C408.1.1 Commissioning including: narrative description of activites, responsibilities of the Cx team, schedule of na C408.1.2 requirements in construction activities including verification of project close out documentation per C103.6, and conflict of C408.1.4.2 documents interest plan (if required); C103.6 Include in general summary that a Cx project report or Compliance Checklist (Figure C408.1.4.2) shall be completed by the Certified Cx Professional and provided to the owner prior to the final mechanical inspection. C408.4.1 Functional performance testing criteria Identify in plans and specifications the intended operation of all equipment and controls during all modes of operation, including interfacing between new and existing -to -remain systems Project Close Out Documentation Documentation and project Indicate in plans that project close out documentation and training of building operations na C103.6 close out submittalpersonnel requirements is required for all SWH components, equipment and systems governed by this code; indicate close out documentation shall include: record documents, O&M manuals, applicable WSEC compliance forms and calculations 2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1 Economizer Exceptions MECH-ECONO 2015 Washington State Energy Code Compliance Forms for Commercial Buildings including R2 & R3 over 3 stories and all R1 Revised January 2017 Project Title: TACO BELL #31325 Date 4/16/2018 For Building Dept. Use All cooling systems shall be configured to provide air economizer operation, regardless of system capacity, for new construction and mechanical system alterations. Various exceptions to this requirement are available. Identify all systems that an economizer exception will be applied to and additional information as noted below. Economizer Exception Summary Refer to Section C403.3 for descriptions of economizer provisions and exceptions. For alterations refer to Section C503.4 and Table C503.4. ECONOMIZER EXCEPTIONS - NEW CONSTRUCTION AND ADDITIONS Exp 1 Cooling equipment serving spaces that are provided with a dedicated outdoor air system (DOAS) per C403.6. Spaces served shall have year- round design cooling loads from lights and equipment less than 5 watts per square foot. System ID Lighting + Equipment Loads (W/sfl Exp 2 Single zone unitary or package systems with dehumidification that affect other systems such that air economizer would increase energy consumption. System ID RTU -1 RTU -2 Exp 3 High efficiency single zone unitary or packaged systems. Equipment cooling efficiency shall be better than the WSEC required minimum efficiency by at least 64% in Climate Zone 4C and 59% in Climate Zone 5B per Table C403.3. System ID Exp 4 Equipment that provides hydronic chilled water for chilled beams and chilled ceiling systems that is served by a water economizer system per C403.3.4 in lieu of air economizer. System ID Exp 5 Water -source heat pumps with heat recovery. Heat pump efficiency shall be 15% better than WSEC required minimum efficiency. Provide at minimum 60% air economizer. Energy recovery to preheat OSA shall have at least 50% effectiveness. Additional system requirements apply. System ID Exp 6 Cooling equipment serving Group R occupancies. Per unit limit is less than 20,000 Btu/h cooling capacity for equipment installed outdoors or in a mech room adjacent to the outdoors. For cooling equipment installed in other locations the unit limit is less than 54,000 Btu/h. Efficiency shall be 15% better than WSEC required minimum efficiency. System ID Equipment Location Cooling Capacity (Btu/h) Exp 7 Variable refrigerant flow (VRF) systems with energy recovery. Outdoor unit shall be a reverse -cycle heat pump with variable speed compressor(s) and condenser fan(s). Outdoor unit cooling capacity shall be not less than 65,000 Btu/h. Energy recovery to preheat outdoor air shall have at least 50% rated effectiveness. System shall be capable of providing simultaneous heating and cooling by tranferring recovered energy from zone(s) in cooling mode to other zone(s) that are in heating Outdoor Unit System ID Cooling Capacity (Btu/hl Exp 8 modc. Cooling equipment serving Controlled Plant Growth Environments. Equipment cooling efficiency shall be better than WSEC required minimum efficiency by at least 20%. Not eligible: unitary and applied heat pumps. System ID SEER, EER, & IEER Exp 9 Cooling equipment with energy recovery. Spaces served shall have year-round design cooling loads from lights and equipment greater than 5 watts per square foot. Energy recovery system shall utilize recovered energy for on-site space heating or preheating of service hot water. Provide calculations to the code official that demonstrate the amount of recovered energy used for on-site heating purposes is equivalent to the annual energy that would be saved by the cooling system with air System ID Lighting + Equipment Loads (W/sfl 2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1 Economizer Exceptions, cont. MECH-ECONO 2015 Washington State Energy Code Compliance Forms for Commercial Buildings including R2 & R3 over 3 stories and all R1 Revised January 2017 Project Title: Date 4/16/2018 Economizer Exception Summary Refer to Section C403.3 for descriptions of economizer provisions and exceptions. For alterations refer to Section C503.4 and Table C503.4. ECONOMIZER EXCEPTIONS - NEW CONSTRUCTION AND ADDITIONS, CONTINUED Exp 10 Cooling equipment for dedicated server, electronic equipment or telecom switch rooms. Per building limit for this exception is 240,000 Btu/h cooling capacity or 10% of required building air economizer capacity, whichever is greater. Part load control required over 85,000 Btu/h. Additional requirements apply. Option a - Cooling equipment efficiency shall be 15% better than the WSEC required minimum efficiency.. Option b - Waterside economizer required. Cooling equipment efficiency shall be 5% better than the WSEC required minimum efficiency. Option c - Waterside economizer required. All cooling equipment is subject to ASHARE Standard 127. Total Claimed Exempt Capacity: Total building air economizer capacity (if claimed > 240 kBtu/h): Alternate Exp 10 Capacity Limit: System ID Compliance Option Cooling Capacity (Btu/h) ECONOMIZER EXCEPTIONS - MECHANICAL SYSTEM ALTERATIONS OR REPLACEMEN C503.4 Exp 1 Pre -approved design alternative to full compliance with air economizer requirement. An alternative for mechanical system alterations where existing building constraints make full compliance with air economizer requirement impractical. Provide calculations to the code official that demonstrate the proposed alternate design strategy provides similar energy savings to the annual energy that would be saved by the cooling system with air economizer per C403.3. System ID Alt. Strategy ECONOMIZER EXCEPTIONS - SIMPLE SYSTEMS C503.4 Qualifying small equipment. Per unit limit less than 33,000 Btu/h. Per Exp 2 building limit for this exception is 72,000 Btu/h cooling capacity or 5% of required building air economizer capacity, whichever is greater. Cooling equipment efficiency shall be 15% better than WSEC required minimum efficiency. Not eligible: non -unitary equipment, unitary equipment installed outdoors or in mech room adjacent to outdoors, equipment installed during new construction, shell -and -core construction, or initial tenant improvement. System ID Cooling Capacity (Btu/h) Total Claimed Exempt Capacity: Total building air economizer capacity (if claimed > 72,000 Btu/h): Alternate C503.4 Exp 2 Capacity Limit: C503.4 Equipment that provides hydronic chilled water for chilled water terminal Exp 3 units. Equipment part load cooling efficiency (IPLV) shall be better than WSEC required minimum efficiency by at least 25%. Per building limit for this exception is 480,000 Btu/h cooling capacity or 20% of required building air economizer capacity, whichever is greater. Chilled water terminal units serving Group R occupancies are not included in the building capacity total. System ID Cooling Capacity (Btu/h) Total Claimed Exempt Capacity: Total building air economizer capacity (if claimed >480,000 Btu/h): Alternate C503.4 Exp 3 Capacity Limit: Table Compliance Options for alteration or replacement of existing C503.4 mechanical cooling equipment per Table C503.4. Refer to table and all applicable table footnotes for full requirements. Applies to the following retrofit conditions: Option a - Any new or replacement equipment Option b - Replacement equipment of same type with same or smaller cooling output capacity. Option c - Replacement equipment of same type with large cooling output capacity. Option d - New equipment added to existing system or replacement equipment that is different than existing being replaced. System ID Equipment Type Compliance Path RTU -1 1. Packaged Units Option A RTU -2 1. Packaged Units Option A 2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1 Mechanical Fan System Power Allowance MECH-FANSYS-SUM 2015 Washington State Energy Code Compliance Forms for Commercial Buildings including R2 & R3 over 3 stories and all R1 Revised January 2017 Project Title: TACO BELL #31325 Date 4/16/2018 For Building Dept. Use HVAC Air Distribution System Schedule List all HVAC systems that have the capability to provide heating and/or cooling to the spaces they serve. System or Primary Supply Fan ID Speed Control (Note 1) Description (Note 2) System Total Nameplate HP (Note 3) Fan Power Calculation Required (Note 4) RTU -1 VAV LOBBY - RTU Main circulation supply fan (7.5 ton) 1.8 No RTU -2 VAV KITCHEN - RTU Main circulation supply fan (12.5 ton) 3.8 No Note 1 - Constant Volume (CV), Variable Air Volume (VAV), or Hospital/Lab CV system that qualifies for VAV budget per C403.2.11.1 Exception 1. Single zone VAV systems shall comply as CV. Note 2 - Describe system type and list all fans (or groups of fans) associated with the delivery and removal of conditioned air by the system. Include all supply, return/relief, exhaust and exhaust hoods (>1 hp), make-up air, dedicated outside air (DOAS), booster fans, and series fan -powered terminals. VAV parallel fan -powered terminals and economizer relief fans do not need to be included if the fans do not operate at peak conditions. Note 3 - Enter the total nameplate hp of all fans associated with the delivery and removal of conditioned air by the system. Note 4 - This form automatically identifies whether a MECH-FANSYS form is required to demonstrate compliance with the fan power allowance (Yes), or this information is not required because the system has a combined total nameplate motor hp that is 5 hp or less (No) MECH-FANSYS Forms A MECH-FANSYS form shall be provided for each system with total nameplate hp greater than 5 hp. Select (Add Fan System Form) to generate an additional form. Added forms can be deleted with button in cell E32 of the added form. 2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1 Mechanical Fan System Power Allowance MECH-FANSYS 2015 Washington State Energy Code Compliance Forms for Commercial Buildings including R2 & R3 over 3 stories and all R1 Revised January 2017 Project Title: TACO BELL#31325 Date 4/16/2018 A separate MECH-FANSYS form must be completed for every HVAC system that exceeds the 5 hp threshold. For Building Dept. Use horse power high efficieny bhp calculation Fan System ID System Supply Fan Y pp Y Speed Control Constant Volume (CV), Variable Air Volume (VAV), or Hospital/Lab CV system that qualifies for VAV budget per C403.2.11.1, Exception 1 Compliance Option Compliance is based upon either the fan motor nameplate (Option 1), the fan brake horsepower (Option 2), or C403.7 VAV fan brake horsepower (10% less than Option 2). The provides adjustments for special equipment per Table C403.2.11.1(2). Fan System Supply Y pp y CFM Total - in Fan Equipment Schedule below, provide maximum design supply airflow rate (CFM) of all supply fans serving the conditioned space in Fan Equipment Schedule below. Fan System CFM Total is the supply airflow of the central air handler at peak design conditions. Additional volumetric air flow provided at zone fan terminals, booster fans, or through induction is not included in the supply CFM total. However, the fan power of this equipment is included in the HP and BHP calculations. Fan System Supply CFM Total is automatically calculated by the form. Fan Equipment Schedule Fan ID and Location Fan Type Quantity of Fan Type Total CFM (Note 1) Total Nameplate HP (Note 2) Total BHP (Note 3) Note 1 - Total CFM is the maximum CFM of the listed fan(s) when operating at peak design operating conditions. Note 2 - Total namplate hp of the listed fan(s). Note 3 - Total brake horsepower (bhp) of the listed fan(s) at peak design operating conditions. Not required if Nameplate HP compliance option chosen. Compliance Message: Total Proposed: Total Allowance: Brake Horsepower Allowance Adjustments Device Type Description and Location CFM thorough this device (CFMD) Assigned Pressure Drop, PD in w.c. (Note 6) Calculated Pressure Drop, PD in w.c• (Note 7) Adjustment, A in bhp (Note 8) Note 4 - Bhp allowance for energy recovery devices and run around coil loops includes both air Total Adjustment (bhp): the device. Note 5 - Energy recovery effectiveness is defined as change in the enthalpy of the outdoor air supply divided by the enthaply difference between the outdoor air and return air at design conditions. Note 6 - Assigned pressure drop (PD) adjustment per Table C403.2.11.1(2). Note 7 - Pressure drop (PD) adjustment shall be calculated per the applicable method defined in Table C403.2.11.1(2) based on specific system conditions. Note 8 - A = PD * CFMD/4131 where A is the allowed system brake horse power adjustment, PD is pressure drop allowance, and CFMD is the cfm through the device. 2015 Washington State Energy Code Compliance Forms for Commercial, R2 and R3 over 3 stories and all R1 Design Load Calculation Summary MECH-LOAD-CALC 2015 Washington State Energy Code Compliance Forms for Commercial Buildings including R2 & R3 over 3 stories and all R1 Revised January 2017 Project Title: TACO BELL #31325 Date 4/16/2018 The following information shall be included in the load calculation program summary submitted with the permit documents. If a load calculation summary is not available, provide the required information below. For Building Dept. Use Equip. ID Area(s) Served Load In mum (Note 1) Load in mum (Note 1) Calculation Metnod (Note 2) Notes RTU -1,2 Kitchen / Lobby 27,861 141,551 Load Calc Attached - last page Note 1 - Design load shall account for the building envelope, lighting, ventilation and occupancy loads of the space(s) served by the mechanical system. Heating and cooling loads shall be adjusted to account for load reduction achieved by an energy recovery system, if applicable. Note 2 - Computer load calculation program, worksheet (identify source), or equivalent computation procedure in accordance with ASHRAE Standard 183. FON) Location: Room Dimensions (Ft): Construction Type: LOAD CALCULATION Washington Length 38 Commericial Width 57 INPUTS: Seattle Height 12 • ktgcleill* Room Information: Walls Width Height (ft.) (ft.) Wall 1 38 Wall 2 57 Wall 3 38 Wa11 4 57 12 12 12 12 Exposed Wall *Yes 0 No *Yes No Yes 0 No *Yes i No Shaded Window (Sq.ft.) Sunny Window (Sq•ft•) Glass Door Area Non Glass Door Area 0.0 156 0.0 0.0 166 0.0 0.0 0.0 0.0 0.0 0.0 21 104 0.0 0.0 0.0 _ Insulation Medium Medium Medium Medium Conditioned Space: Number of People: Office Equipment: Appliances: Above? (Yes t. No 15 None None None None Below? 3Yes *No Qty: 0 Qty: 0 Qty: 0 Qty: 0 Restaurant Oven Qty:.2 Refrigerator Qty: 4 Other Equipment Load (BTU/hr): 100000 Lighting Wattage (per Sq. Ft): Level of Infiltration: Room Temperature Setpoint: BTU Load Total (Summer): BTU Load Breakdown (Summer): BTU Load Total (Winter): BTU Load Breakdown (Winter): 1 of 2 1.5 None 70 °F (21.1 °C) 141551.0 DoOrs: Infil.: Equip/Apps: 27861.6 Doors: 76.8 IW.: 0.0 Calculate; -. 32.1 0.0 14103.2 None Qty: 0 None Qty: 0 Reset OUTPUTS: Walls: Roof/Floor: Lighting: 2804.5 3314.0 9389.6 Walls: 6699.6 Roof/Floor: 13300.1 Windows: People: Other: 19257.6 7650.0 .......................... 85000.0 Windows: 7785.2 Help Help Help Help Help Help Help Help Help Help Help Help Help Help Help Help Help - Ki ngworks JOB TITLE NSR Tacobell CONSULTING ENGINEERS Structural Calculations 600 Dupont St * Ste B JOB NO. 18092 SHEET NO. 1 Bellingham, WA 98225 CALCULATED BY BJ DATE 4/10/18 360-714-8260 www.king-works.com CHECKED BY JRK DATE 4/11/18 4/11/1 'PA 51757 ' '4 s,CjbRAL £0*, WED FOR CODE COMPLIANCE APPROVED STRUCTURAL CALCULATIONS FOR Northsound Refrigeration Tacobell 16350 W Valley Hwy Tukwila, WA Code: 2015 International Building Code Loads: Existing Roof Dead 20 psf Live 25 psf Mechanical Units Tag Ex Wt New Wt Change Note MAY 01 2018 City of Tukwila BUILDING DIVISION RECEIVED CITY OF TUKWILA APR 1 7 2018 PERMIT CENTER Lobby RTU Kitch RTU Description: 993 lbs 1225 lbs 1233 lbs 1556 lbs 24% 27% increase is greater than 5%, see attached increase is greater than 5%, see attached Reviewing new mechanical unit installation. Structural calculations include check for the increase in demand on the existing structure and seismic/wind anchorage calculations. Page Item 1 Calc Cover Sheet 2 Structural Calculations 8 Appendix: Structural Sketches 16 Appendix: NSR Information Provided Kingworks CONSULTING ENGINEERS 600 Dupont St ' Ste B Bellingham, WA 98225 360-714-8260 www.king•works.00m JOB TITLE NSR Tacobelf Structural Calculations JOB NO. 18092 SHEET NO. 2 CALCULATED BY BJ DATE 4/10/18 CHECKED BY JRK DATE 47-11118- Structural /1 1118 Structural Review Disclaimer: All weights, geometry, and existing building information has been provided by Northsound Refrigeration. Kingworks takes no responsibility for any incorrect or inaccurate information provided that would change the results of our calculations. Notify Kingworks immediately if any variations from what has been provided are encountered in the field. Structural Review Findings: New units increase demand on existing joists by less than 5%. See appendix for structural anchorage connections. Kingworks CONSULTING ENGINEERS 600 Dupont St Ste B Bellingham, WA 98225 360-714-8260 WWW, king •works.com JOB TITLE NSR Tacobell Structural Calculations JOB NO 18092 SHEET NO 3 CALCULATED BY BJ DATE 4/10/18 CHECKED BY JRK DATE 4/11/18 Wind and Seismic Overturning Criteria Seismic (ASCE 7-10 Chapter 13) Site Class = D SDS = 0.96g I= 1 ap = Rp = Bldg Ht = Unit Ht on Bldg = 2.5 6 20 ft 20 ft [Assumed] [USGS Hazard Calculator] [ASCE Section 131.3] [ASCE Table 13.6-1] [ASCE Table 13.6-1] [h] [z] Seismic Design Force(ASCE 13.3) Horizontal 0.4apSDsWi, z) F — P /'R\1 + 2—h IP Fp = .48 x Wp < 1.54 x Wp Fp,„,„ = 29 x Wp Design Fphoo, = .48 x Wp Vertical = +/-0.2SdsWp DesignF,= .19 xWp Fpm„ = 1.6SDSIpWp Fprnin = 0.3SDS1pWp controls Wind Loads (ASCE 7-10 Chapter 29 Building Appurtenances) Wind Speed, V = Exposure Cat = Kd = = = Zg = = Horizontal GC, Horizontal GC, = qh 110 MPH B 0.85 1 7 1200 0.62 1.9 1.5 [ASCE Section 26.7.3] [ASCE Table 26.6.1] [ASCE Section 26.8] [ASCE Table 26.9-1] [ASCE Table 26.9-1] [ASCE Table 27.3-1 Footnote Equations] [ASCE Section 29.5.1] [ASCE Section 29.5.1] 16.428 psf [ASCE Eq 29.3-1] Phori, = 31.214 psf Pved = 24.643 psf Kingworks JOB TrrLE NSA Tacobell CONSULTING ENGINEERS Structural Calculations 600 Dupont St • Ste 8 JOB NO. 18092........................ SHEET NO 4 Bellingham, WA 98225 CALCULATED BY SJDATE ----4/10/18 360-714-8260 www.king• orks,com CHECKED BY WJRK _ •..._....._,_..•..•._ DATE 4/11/18 Calculate Unit Overturning and Shear For Wind & Seismic Unit: Lobby RTU Weight = 1233 lbs Length = 7,35417 ft Width = 4,95833 ft Height = 4.25 ft Overturning in Short Direction n r3 tl w = 594 Ibs = 976 Ib It Idth = 4.958 ft Overturning in Long Direction rn 594 lbs - 658 Ibs h = 7.354 ft Max/Min Reactions (LRFD) 1.2D+E: 1113 Ibs .9D+E: 182 Ibs 1.2D+W: 1607 Ibs .90+W: -313 Ibs Max/Min Reactions (ASD) D+.7E: .6D+.7E: D+.6W: ,6D+.6W: 878 Ibs 109 Ibs 1137 Ibs -151 lbs fsy Max/Min Reactions (LRFD) 1.2D+E: 1030 Ibs .9D+E: 265 Ibs 1.2D+W: 1379 Ibs .9D+W: -85 Ibs Max/Min Reactions (ASO) D+.7E: 820 Ibs .6D+.7E: 167 Ibs D+.6W: 1000 Ibs .6D+.6W: -14 Ibs Kingworks CONSULTING ENGINEERS 600 Dupont St ' Ste 8 Bellingham, WA 98225 360-714-8260 vvww.king-works.com JOB TITLE NSR Tacobell Structural Calcutations JOB NO. 18092 CALCULATED BY BJ CHECKED BY-jtik Calculate Unit Overturning and Shear For Wind & Seismic Unit: Kitchen RTU Weight = 1556 Ibs Length = 7.35417 ft Width = 4,95833 ft Height = 4.25 ft Overturning in Short Direction Width = 4.958 ft Overturning in Long Direction Length = 7.354 ft SHEET NO 5 DATE 4/10/18 DATE 4/11/18 Max/Min Reactions (LRFD) 1.20+E: 1405 ibs .9D+E: 229 lbs 1.2D+W: 1801 Ibs .9D+W: -167 ibs Max/Min Reactions (ASD) D+.7E: 1108 Ibs .6D+.7E: 137 lbs 0+,6W: 1298 lbs .6D+.6W: 54 lbs v- ;) kL151 jAp';17e,:,.1 Max/Min Reactions (LRFD) 1.2D+E: 1300 lbs .9D+E: 334 lbs 1.2D+W: 1573 lbs .9D+W: 61 Ibs Max/Min Reactions (ASD) D+.7E: 1034 lbs .6D+.7E: 210 lbs D+.6W: 1162 lbs .6D+.6W: 83 Ibs Kingworks JOB TITLE NSR Tacobell CONSULTING ENGINEERS Structural Calculations 600 Dupont St * Ste B JOB NO. 18092 SHEET NO 6 Bellingham, WA 98225 CALCULATED BY BJ _...._._._..___.__ DATE 4/10/18 360.7148260 www.king-works.com CHECKED BY MK DATE 4111/18 Review Existing Member to Verify Increase in Demand is Less than 5% Member: Lobby RTU Span = 38 ft Existing Loading Full Uniform Load w= 90 plf Point Loads P,= 166 lbs @ 3 ft P2= 166 lbs @ 8 ft P3= O lbs @ 0 ft New Proposed Loading Full Uniform Load Point Loads w= 90 pif P1= 206 lbs @ 3 ft P2= 206 lbs @ 8 ft Partial Uniform Load w1= O plf From O ft to O ft w1= Oplf From 0 ft to 0 ft w1= 0 pif From O ft to O ft Partial Uniform Load w1= 0 pit From 0 ft to 0 ft w1= 0 plf From Oft to O ft P3= O lbs @ oft w1= 0 plf From Oft to O ft Loading, Shear, and Moment Diagrams Existing Loading New Loading Loading II Shear Moment Results Summary Existing New % Change Status Shear 1993Ibs 2062 lbs 3.43% OK Moment 17117 ft-ibs 17338 ft -lbs L30% OK Ki ngworks JOB TITLE NSR Tacobell CONSULTING ENGINEERS Structural Calculations 600 Dupont St " Ste B JOB NO. 18092 SHEET NO 7 Bellingham, WA 98225 CALCULATED DV BJ DATE 4/10/18 360-714-8260 www,king-works.com CHECKED BY JRK DATE 4/11/18 Review Existing Member to Verify Increase in Demand is Less than 5% Member: Kitch RTU Span = 38 ft Existing Loading Full Uniform Load w= 135 p11 Point Loads Pi= 204 lbs @ 17 ft P2= 204 lbs @ 21 ft P3= 0 lbs @ 0 ft New Proposed Loading Full Uniform Load Point Loads w= 135 plf Pl= 259 Ibs @ 17 ft P2= 259 lbs @ 21 ft P3"= 0 lbs @ 0 ft Loading, Shear, and Moment Diagrams Existing Loading Loading Shear Moment 1 Partial Uniform Load wi= 0 Of From 0 ft to 0 ft 0 plf From 0 ft to Oft w1= 0 plf From 0 ft to 0 ft Partial Uniform Load wi= 0 plf From 0 ft to 0 ft wi= 0 p11 From 0 ft to 011 w1= 0 pff From 011 to 0 ft New Loading Results Summary Existing - New % Change Status Shear 2769 lbs 2824 Ibs 1.99% OK Moment 27778 ft lbs 28711 ft -lbs 3.36% OK Kingworks JOB TITLE NSR Tacobell CONSULTING ENGINEERS Structural Calculations 600 Dupont St Ste B JOB NO. 18092 SHEET NO 8 Bellingham, WA 98225 CALCULATED BY BJ DATE 4/10/18 360-714-8260 www,king-works.com CHECKED BY JRK DATE 4/11/18 APPENDIX: Structural Sketches FOR Northsound Refrigeration Tacobei I 16350 W Valley Hwy Tukwila, WA (E) PERIMETER EAVE / STRUCTURAL ROOF PLAN NSR-TACOBELL CONSULTING ENGINEERS, PLLC soo DUPONT STREET, SUITE B BELLINGHAM, WA 99225 960-714-8280 WWW. king -works .com EQ Project number 18092 SSK-01 3 f Drawn by BBJ Checked by JRK Scale 1/8" =1-0" ; � I 1 . (E) METAL WOOD 4 TRUSSES PLATE . CONiECTED AT 36" O/C TYP 6' - 0' LOBBY MAX RTU, WT = 1,250 LBS € 1 . (\ / — - (EX WT = 993 LBS) I t I 1 1 1 f•KITCHEN OPP MAX (EX WT = WT = 1225 RTU. 550 LBS LBS) SK -0 y, 0„ 1 o — NOTE: NOTIFY KINGWORKS IF ANY DISCREPANCIES FROM THE EXISTING FRAMING SHOWN ARE FOUND. EXISTING STRUCTURE SHOWN IS BASED ON INFORMATION PROVIDED BY NORTHSOUND REFRIGERATION, KINGWORKS ASSUMES NO LIABILITY IF ACTUAL CONDITIONS VARY FROM WHAT IS SHOWN. ki ngworks STRUCTURAL ROOF PLAN NSR-TACOBELL CONSULTING ENGINEERS, PLLC soo DUPONT STREET, SUITE B BELLINGHAM, WA 99225 960-714-8280 WWW. king -works .com Project number 18092 SSK-01 Date 4/10/18 Drawn by BBJ Checked by JRK Scale 1/8" =1-0" E copynghl Kirg alo 00aulr9 Ninon RAC: 2018 4/11/2818 2:12:46 PM MECHANICAL UNIT PER PLAN TYP AT EA MPCWT BELOW o_ 2 w 0 0 o- a w ki n gwo rks PARTIAL PLAN AT RTU NSR-TACOBELL CONSULTING ENGINEERS, PLLC 600 DUPONT STREET, SUITE B BELLINGHAM, WA 98225 360-714-8260 WWW. king -works. com Project number 18092 SSK-02 Date 4/10/18 Drawn by BBJ Checked by JRK Scale 1/2" = 1'-0" 0 copyright King..88 Consulting Engineers PLLC. 2018 011/2018 2'1246 PM MECHANICAL UNIT PER PLAN 2"x4"x16 GA PLATE WITH (2)# 12 SCREWS INTO MECH'L UNIT AND (2) #12 SCREWS INTO CURB ADAPTOR. (2) PLATES EACH SIDE OF UNIT CURB ADAPTOR (18 GA MIN) #12 SCREW AT12"OC FOR PERIMETER OF CURB. (E) CURB VERIFY #12 SCREW MIN AT EACH TRUSS BELOW, ADD SCREWS AS NEEDED (E) ROOF SHEATHING METAL PLATE CONNECTED WOOD TRUSS OR BLOCKING MEMBER PER PLAN kingworks �o rkL+ y v V �7 RTU ANCHORAGE AT MPCWT NSR - TACOBELL CONSULTING ENGINEERS, PLLC 600 DUPONT STREET, SUITE B BELLINGHAM, WA98225 360-714-8260 www.king-works.com Project number 18092 SSK-03 Date 4/10/18 Drawn by BJ Checked by JRK Scale 1 112" =1'-0" 61 copyngM Kingmrks Cmsu8ng Engineers PLLC: 2018 4/1112018 21247 PM Kingworks JOB TITLE NSR T icobeII CONSULTING ENGINEERS Structural Calculations 600 Dupont St " Ste B JOB NO. 18092 SHEET NO 12 Bellingham, WA 98225 CALCULATED BY BJ DATE 4/10/18 360-714.8260 www.king-works.com CHECKED BY JRK DATE 4/11/18 APPENDIX: NSR Information FOR Northsound Refrigeration Tacobeil 16350 W Valley Hwy Tukwila. WA Project: Taco Bell -Tukwila Prepared By: 14)55i/ Rill Performance Summary For 7.5T GasEle 03/23/2018 11:16AM Part Number:48TCDDO8A2A5-OAOGO AR! EER: IEER: Base Unit Dimensions Unit Length: ()nit Width: Unit Height: Operating Weight Base Unit Weight: Medium Static Option (Belt Drive): 2 Speed Fan Controller (VFD): Accessories LOW LEAK - Vertical EconoMiSer, Total Operating Weight Unit Unit Voltage -Phase -Hertz: Air Discharge. Fan Drive Type: Actual Airflow: Site Altitude Cooling Performance Condenser Entering Nr DB: Evaporator Entering Air DB: Evaporator Entering Air WB: Entering Air Enthalpy: Evaporator Leaving Air DB: Evaporator Leaving Air WB: Evaporator Leaving Air Enthalpy: Gross Cooling Capacity: Gross Sensible Capacity: Compressor Power Input: Coil Bypass Factor: Heating Performance Heating Airflow: Entering Air Temp. Leaving Nr Temp: Gas Heating Input Capacity: Gas Heating Output Capacity: Temperature Rise: Thermal Efficiency ("/Q): Supply Fan External Static Pressure: Options / Accessories Static Pressure Economizer: Total Application Static (ESP + Unit OptsrlAcc,): Fan RPM: Fan Power: NOTE: 11.00 12.6 88.1 in 59.5 in 41.3 in 835 lb 15 lb 20 10 75 lb 945 Ib eAkit4b 435 230-3-60 Vertical Belt 3000 CFM 0 ft 95.0 F 80.0 F 67.0 F 31.44 BTU/lb 58.7 F 57.6 F 24.76 BTU/lb 90.10 MBH 68.90 MBH 6.40 kW 0.092 3000 CFM 70.0 F 101.8 F 125.0 MBH 103.0 MBH 31.8 F 82.0 0,60 in wg 0.11 in wg 0.71 inwg 792 1.80 BHP Selected IFM RPM Range: 733 - 949 Electrical Data Voltage Range: 187 - 253 Compressor #1 RI A. 13.6 Compressor #1 I RA 83 1,2.33 Packaged Rooftop Builder 1.49f Page 7 of 20 1Project: Taco Bell.Tukwila Prepal ea By: Certified Drawing for 7.5T GasEle 05 E3` g-ru 03/2372018 11:18AM k I at 01 a 4; a t t f3C31140 Packaged Rooftop Budder 1 491 Page 4 of 20 LAW- g3-4 'CLIP!) INSULATED COVER I I. 4120ao Maio:UM Om 214404$4,04,,treet4144E 442,,STEOL G*ScFT44u14.11011 1 141.1106441111Y Taw T 4t iror EXISTING CURES LAYOUT 44 SW UP.11,,V 12 &IV 3,4° 0.0 • 2:1VV _1 — vr Mt' %MIS CURB OWN COI STANDARD CONFIGURATION co* RESERVES THE MORT 70 CHARGE LAYOUT mrsour NOTIFICATION. W OURS IS motto et A DIFFERENT COREDURATION COI MUST SE NOTIFIED PRIOR TO RACING AR moot St UP — ..... TE t 14�O6 1 If the heating value of the gas does not exceed the values listed in table, derating of unil is not required. Should the heating value of the gas exceed the table values, or if the elevation is greeter than 6,000 feet above sea level, it vr10 be necessary to devote the unit. Lennox requires that dersie conditions be 4% per thousand feet abovesea level. Thus. at an altitude of 4000 feet, if the heating value of the gas exceeds 1000 6111/%3, the unit will require a 16% delete. SPECIFICATIONS — GCS16-953 Ehrvailon Above Sea imel Weell Mi Hs Value letuift 5001-8000 4001 —5000 4000 1000 1050 Sea Lev 1100 *Sound Rating Number in accordance with ARI Standard 270. 'Rated on accordance with ARI Standard 211)(241k 95 f outdoor tYt icroperoture and 00 'F dbirS7 iwit entering evaporator ay. "For LPG units a field conversion kir is required and must be ordered exile. San OPlinnaMS100.4 WOO- • 'Using total air volume sod system stioc pressers requirements determine from blower performance tables rpm and bhp raqutrect. Maxi MUM usable hp of motors furritshed by Lennox are shown. if meter* of con hp ate used, be aids lo 114*) within 1114i **mice t•ciat limitotions outlined on the motor nameotme. 7— _ Medal No' 4 ARI Standard 21W240 Italians -, Totalcooling ca ly (WM .. Total unit watts9.780 EERI8tu s 9,0 *ARI Standard 270 SRN Is) 8.8 Reftlgetarit (22) Charge Sage 1 lbs. 4 oz. Sage 2 5 lbs. 14 oz. ........................ Evaporator elovver and Drive Selection Blower wheel nominal diameter x width fin.) 12 x 12 FacterY installed. "*Drives Nominal in rsepower 2 Maximum uaabte horsPOwer 2.30 RPMrang740-1010 Evatxtrator Coil Net facearea (sq. -) 7.75 Tube diameter (in.) & No. of rows —3 'napertnoh14 Condenser Coil Net face area (sq. 11.) 15.87 Tube diameter fin ) 8i No. of r 2 Fins per inch Condenser Fans _ (in.) No. of Air vet t 6300 Motor harsepower . 3/4 MtorwaIt 660 Two Stage Heating capacity (Natural Gas Only) (huh Input ( ) 126.000 fituh Outpu (lowI 66,000 Btuh input (High)200,000 i Two Stage Heating Capacity ("LPG Gas Only) �tuh Input (Io*) 1 126,000 98 Stub tnput (thgh>175,000 142,000 81.5% Gas Supply Connections tot lin / 3/4 4 RecommendedGas NMUr&7 Condensate dram size mpt (in.) 1 ( x 20 x ' ft875 ,),16 Electrical characieristIcs ...- 20W230v ar 460v — 80 hertz — 3 phase *Sound Rating Number in accordance with ARI Standard 270. 'Rated on accordance with ARI Standard 211)(241k 95 f outdoor tYt icroperoture and 00 'F dbirS7 iwit entering evaporator ay. "For LPG units a field conversion kir is required and must be ordered exile. San OPlinnaMS100.4 WOO- • 'Using total air volume sod system stioc pressers requirements determine from blower performance tables rpm and bhp raqutrect. Maxi MUM usable hp of motors furritshed by Lennox are shown. if meter* of con hp ate used, be aids lo 114*) within 1114i **mice t•ciat limitotions outlined on the motor nameotme. 7— SPECIFICATIONS 3CS16.1.353 & GCS ft3 1603 to *Sound Rating Number in accordance with ARI Standard 210. •Flated'n aceordenee with ARI Standard 210,240 or 380: 95•F outdoor SU tamperstureand 80' r db/67"F web entering evaporator air. "For LPG units a tiaid conyerttion kit is roouired and must bu ordered extra. See Optional Atxxssorics rebte. • • •Using total aw volume and system slant presau re requeernerits determine from blower performance tables rpm and bhp required. Maximum usable hpot mato furnished by Lennox are shown, It motors of comparable hp are used. be sure to keep within the service factor limitations outlined on the motor nemeplare. -- 8— ef 001111-1883 *ARI Standard 210/240 Ratings Of Standard *360 Ratings Total coot g capsc#ty tkNuh3 119.( *142,000 Total unit watts 13,220 18,820 EER (RtuhgWatts) 9.0 8.50 Integrated'Part 1 tad Vshre 8.8 *AR( Standard 270 SRN (Bela) 8:6 ... . Refrigerant (22) Charge Stage i 7 lbs. 4 ax. 10 #bt). 12 oz. Stage 2 7 lbs. 4 oz. 7 lbs. 12 oz. Evaporator Blower and Drive Selection Blower wheel nominal diarnater x width #in,} 15 x 15 15 x15 Factory Installed ***Drives Nominal tor horse pcw er 2 3 Maximum usable horsepower 2.3(l 3.45 Voltage & phase 20812 460v-3ph — 208/230/480v-3ph RPM range 730 — 950 _ 730 —950 Optional Factory Installed Drives Nominal motor horsepower 3 Maximum usable horsepower 3.45 Volta g s & phase 4itr 3ph RPM range 730— 950 . _ . _ Evaporator Coil Net lace area (sq. ft.) 9,46 11.9 Tube diameter fin.) & Ntr, of rows 318 — t 3i8 — 3 Fins per inch 12 .. , 12 Condenser Coil Net face area (sq. ft.) 20.0 24.4 , Tube diemeter fin.) & No. of rOW3 d 3j8 — 3 319 — 2 Fins Per inch 20 20 Condenser Fans Demeter (in.) & No. of blades (2) 20 (2) 22 — 4 Air volume (den) 8400 Total 7700 Total • Motor horsepower (2) 1/3 (211/2 Motor watts 876 Total 1050 Total Two Stage Heating Capacity Only) Btuh Input (low) 17{1000 170,000 /huh Output (low) f 32 500 132,500 Btuh Input (High) 270,000 270.000 (Natural Gas Btuh output (High) 216,000 218,000 A.G.A. Thermal Efficiency 80% 80% Stull Input (low) 1 170,040 170,000 Two Stage Stith Output (lottvl 132,E 132,500 Heating Capacity Btuh Input (High) 236 250 238,250 {**IPG Gas Only) Btuh Output (High) 192.500 192,500 A.G.A. Thermal Efficiency 81.5% 81.5% Gas Supply Natural 314 3/4 Connections fpt tint.) **LPG 314 314 Recommended Gas Natural 7 7 Supply Pressure (wc_ in.) "'LPC 11 11 Condensate dram size mgt (in.) 1 1 No. & size of filters liri.# (41 16 x 26 x 2 (4) 20 x 25 x Neter t►f omt .1 (1 Package) " 1� ',ii, Electrical characteristics 2f td30v or 460v 80 hertz -- 3 phase *Sound Rating Number in accordance with ARI Standard 210. •Flated'n aceordenee with ARI Standard 210,240 or 380: 95•F outdoor SU tamperstureand 80' r db/67"F web entering evaporator air. "For LPG units a tiaid conyerttion kit is roouired and must bu ordered extra. See Optional Atxxssorics rebte. • • •Using total aw volume and system slant presau re requeernerits determine from blower performance tables rpm and bhp required. Maximum usable hpot mato furnished by Lennox are shown, It motors of comparable hp are used. be sure to keep within the service factor limitations outlined on the motor nemeplare. -- 8— i-Obt 14 GCS16-953 Thru -71503 OPTIONAL It 7 °!. 1'.01.1St Be Oderr (1 Unit ModI No. 00518-953 GCSIS13S3 GSt8.1503 **LPG Conversion Kit L • 7 1320881 LB- 7 A Roof Nlounting Frame — (Net Weight) RMF16-95 (107 lbs 1320101 F16-1 1 (119 lbs. ) Economizer Dampers -- et VVeightt - No. & size of filters lin) REMD1 PA 95(118 lbs.) (2) 16 x 25 x 1 (14G221 1 AA- 13b (125 hs ) (2)16 x 25 x 1 (70423) REMD18M-160 (140 .) (2) 20 x 25 x 1 151G251 Horizonial Economizer Dampers — (Net Weig(fl) No. & size of filters (in.) DH16M-95(120 lbs.) (2) 16 x 25 x 1 (241103) EMOH16M•1351137 (bs.) (2)16 x 25 x 1 12411041 E 1 -180 (147 lbs./ (2) 20 x 25 x 1 (2414105) Exhaust Dampers — (Net Weight (Net Face Area 1316-95/ 160 (5 1683(0.43 sq. ft ) Difterernia( Enthalpy Control 54044 Horizontal Supply and Return Air Kit -- (Net Weight) LE1-55 BA (30 lbs.) (344371) LB -5575686135 lbs.) 135G421 L ' 756BC (4 lbs.) 151G27) Bolton' Power Entry Kit ---INffl VVeigliti LB- 757CA (12 lbs.1 70) Furnithed Ceiling Supply arid Return Air Diffusers 1Net Weight) Step -Down RTD11-95 (88 bs.I (29604) RT011-135 1126 (bs.) (28605) RTD11-1135 1392 bs.1 129006) flosti F(311,95 (75 I . ) FOl 1-135195 lbs) 011) ED11-185 (289 lbs.) (29010) iraiosition' SRT16-135 (31) lbs.) (971110) SRT16- 100 (70 lbs.) (971111) Outdoor Air Dampers - - (Net Weight) No. & size of fitters (in.) ij OAD16-135 (43 lbs.) (1) 16 x 20 x 1 (36G2S) _ .. .. .. . OAD16-160 (45 lbs.) (1) 16 x20 x1 (S1G30) . ... Automatic OAD16 Damper Kit -- (Net Weight) 36021 (7 lba.) Low Ambient Control Kit 18-5711390 11 113BH 116.196I LB -571138.1 (16167) limed -Off Control Kit (2) L8 -507098A , . 750 For LPG units a ficld conversion kit ellaqtartitt GCS16-1853 lhru -3003 mune be PTIOAIA ACCESSORIES flOrk.4 Be Ordered Extra Unit Modul No. O�111-1963 GC814-26113. 008164275.1 5 GCS1I-3003 **LPG Conversion Kit L0-131509DA11214311 LB -019390A 21131) -470) Roof Mounting Frame — (Net Weight) RMF16- 185 (127 lbs.) 121105) _ .... RMF16- (180 lbs.1(41/104) — Economizer Dampers with Gravity Exhaust— (Net Weight) No. & size of filters (in.) REM016M-185(160 lbs,) (2) 26 x 25 x 1 (401414) REMD16M• 300 (210 lbs.) (3)20 x 25* 1(441147) Differential Enthalpy Controi - 54044 Optional Power Exhaust Fans (Down -Flo Only) Model No. (Net Weight) 208/230v PED16-185 (00 lbs.) (121411) PED16-300 (91 lbs.) (441179) i 480v PE016-1 lbs.) 1121417) PED16-300 (91 lbs.) NANO) Diameter (in.) & No. of Blades (2) 16 -- 5 (3) 16 — 5 Total air volume lclmf 4200 6300 Motor Horsepower (2) 1/4 1/4 Watts input (total) 750 Horizontal Supply and Return Air Ktt --• (No( Weight, 1.8 557568D 152 lbs.) 112)1641 LB -557568E mo lbs.)(411123) Ceiling Supply and Return Air Diffusers (Net Weight) Step -Down R7011-1115 (392 lbs.) (290001 RTD11-275 (403 lbs., (29007) , Flush FD11-185 (289 I .) 1 F011-275 (383 (bs.) (211311) TrainitionSRT16-1 (75 bs.) (971112)SRT1 (120 lbs.)197/1131 Outdoor Air Dempe s — (Net Weight) No. & site of filters 1 n.) OAD18-185 (120 lbs.) (1) 26 x 27 x 1 (121163) OAD16-300 (84 lbs.) 11126 x 31 x 114044471 Automatic OAD16 Damper Kit -- (Net Weight) 35021 (7 lbs.) Low Ambient Control Kit 10-571 138K (10388) 10-5711351- 16.169) For IPO Wift% a field conversion kit is required :tint must bv or red extra. — 12— Performance Summary For 12.5T GasE e Project: Taco Bell -Tukwila Prepared By; 1411 -CAE Part Number:48TCDD14A3A5-0A0G0 ARI EER: EER: Base Unit Dimensions Unit Length: Unit Width: Unit Height: Operating Weight Base Unit Weight: High Static Option (Belt Drive): 2 Speed Fan Controller (VFD): Accessories LOW LEAK - Vertical EconoMiSer Total Operating Weight: Unit Unit Voltage -Phase -Hertz: Air Discharge: Fan Drive Type: Actual Airflow: Site Altitude: Cooling Performance Condenser Entering Air DB: Evaporator Entering Air DB: Evaporator Entering Air WB: Entering Air Enthalpy: Evaporator Leaving Air DB: Evaporator Leaving Air WB: Evaporator Leaving Air Enthalpy: Gross Cooling Capacity: Gross Sensible Capacity: Cornpressor Power Input; Coil Bypass Factor: Heating Performance Heating Airflow: Entering Air Temp: Leaving Air Temp: Gas Heating Input Capacity: Gas Heating Output Capacity. Temperature Rise: Thermal Efficiency (%): C4 10.80 12.2 88.1 in 59.5 in 49.4 in 1167 Ib 15 lb 20 lb 75 Ib 1277 lb 2 -Pt 230-3-60 Vertical Belt 4800 CFM 0 ft 95.0 F 80.0 F 67.0 F 31.44 BTU/lb 60.0 F 57.3 F 24.59 BTU/lb 148.00 MBH 103.80 MBH 10.20 kW 0.245 4800 CFM 70.0 F 98.5 F 120.0 / 180.0 MBH 98.0 / 148.0 MBH 28.5 F 82.0 Supply Fan External Static Pressure: 0.60 in wg Options / Accessories Static Pressure Economizer: 0.30 in wg Total Application Static (ESP + Unit Opts/Acc.): 0.90 in wg Fan RPM: 1074 Fan Power: 3.78 BHP NOTE: Selected IFM RPM Range: 1022 - 1240 Electrical Data Voltage Range: 187 - 253 Compressor #1 RLA: 19 Compressor #1 I RA: 123 03/23/2018 1116AM Packaged Rooftop Builder 149f Page 16 ot 20 Project: Taco BQ!b-Tukwita Prepared By: ified Drawin 03/2312018 1116AM 401 Packaged kooftop £iuiIc er ': 491 Page 13 of 20 ill6ULATED PANEL • A:13060 10 OW WW1 -at? tarrER-44. *op 64.1.0.,ZED STEP,. 3 GAVOT fm,o.mr.„o VON COO ▪ a/M,4 r • .4.1111:£11Sirf ' Attn: Tor. EXISTING CURB LAYOUT sks.ts. CURB SHOWN ISGUI STANDARD CONFIGURATION COI RESERVES THE RIMY TO CHANGE LAYOUT WITHOUT NOTIFICATION. CURB IS NEEDED IN A DIFFERENT CONFIGURATION COI RUST SE NOTIFIED PRIOR TO PLACING AN ORDER. VAltim304 314.1f 3 a-21,ms sr SPECIFICATIONS GCS16-13 GCS16-1603 Model No. GCS16-l53 GCS161603 AR! Standard 210/240 Ratings or Standard-;,` 360 Ratings Total cooling capacity (Null 119,000 -:r 142,000 Total unit watts 13,220 16,820 EER (Btuh;Watts) 9.0 8.50 .egrated Part Load Value .. _ . 8.8 *ARI Stndard 270 SRN (Bets) ,.. 8.8 . ,.. Refrigerant (22) Charge Stag ,1 7 lbs. 4oz. 10 lbs. 12 o. Stage 2 )bs. 4 oz. 7 lbs. 12 oz, Evaporator Blower and Drive Selection B)ower wtee1 no mal diemoter x width (M. x 15 15 x 15 f oc10(Y Installed *•mrioes Nominal motor horsepower 2 3 Maximum usable horsepower . 2.30 3.45 Voltage & phase 208/230/460v-3Oh 20sa W460v-3ph RPM range130-950 7 — 950 Optional Factory Installed •"Drive N minal motor horsapower 3 ... MaxImLJm usable horsepower 345... Voltage & p a 2 4r v-3ph RPM range ' s ...... Evaporator Coil Net fact) area (sq. ft,) 9.46 11.9 Tube diameter 011.1 & No, af a s 3/8 4 3/8 «-3 Fins per inch 12 12 Condenser Coil Netce area (sq. fLl 20.0 . 24.4 Tube diameter (in.) & No. of row . 3 - 2 318 2 Fins per inch 20 20 Condenser Fans Diameter lin.) & No. o 'lades 2)20 .— 22 -- 4 Au volume lcfrn) 6400Toial 7700 Total Motor horsepower (2)113 (21 1/2 Motor watts 875 Total 1050 Total Two Stage Heating Capacity (Natura) Gas Only) Btuh Input 170,000 170,000 Rtuh Output (low 132,500 132,500 Rtuh Input (High) 270,000 270,000 Btuh Output (High/ 216,000 216,000 A G.A. Thermal Efficiency 80% 80% Btuh Input (low} 170,000 170,000 Two Stage Btuh Output (fowl 132,500 132,500 Heating Capacity Btuh Input (High) 236,250 236,250 ("LPG Gas Only) Btuh Output !Hi_ 192.500 192,500 A.G.A. Thermal Efficiency81.5% 81.5% Gas Supply Natural 3/4 3/4 Connections lot (in.) A.L.PG 3/4 3/4 Recommended Gas Natural 1 7 Supply Pressure (wc. in.) **LPG 11 11 Condensate drain size mot (in.) L._.. , I No. & size of filters (in.1 4 x 25 x 2 14 2 x 2 Net weight of basic unit Obi-. I i 1 l'ili..kalitii 1' Electrical characteristics 11 206/230v or 460v — 60 hertz — 3 phase *Sound Rating Number in accordance with Aril Standard 770. • Hated ;n accordance with Aril Standard 210.,241) or 350tib'F outdoor air tem paratore and HO' F db/67' F wn entering evaporator air. • *For LPG units a field convection kit o rcattlfCd j'Id must hu or (0arcti extra Sce Optional .ones table. • • • trting mai ,4!t volume and system vatic pressure ronottements determine from blower poiformance 7ahk,z; :rfrn and bhp requIred. Maxim a rn kItiblettptl!cno•ots furnished by Lennox are shown, It motdra of comoar able tip we nye& be sure to keel) within the service factor limitations (tattled on the motor nameplate. — 8 — GCS16-953 Thru .1603 OPTIONAL ACCESSORIES (Must e Ordered Extr Unit NI del No. GC 16-953 GCSI6-1353 GCS16-1603 "LPG Conversion Kit - 7 A 1 . A (32G8) (rot Mounting Frame Weights 132090) 132G911 RMF16-300 (180 lbs.) (411104) Economizer Dampers with Gravity Exhaust— (Net Weight) No. & size of filters (in.) Ceonomizer Dampers - - INvt Weignu N. & size of filters (In .1 , RtMDI6M-95(118 ibs. (2 16 x 25 x 1 (74622) REMD16M-13b (12b Ib 12116 x 25 x 1174(323) REMD16M-160 1140 lbs.) 12/ 20 x 25 x 1 (51G25) Horizonta! Economizer Dampers -- (Net Weight) No. & size of filterS (in.) EMD 16M-951120 lbs.) 12) 16 x 25 x 1 1241103) EMD1-116M.135 (137 ibs.) (2) 16 x 25 x 1(21804) (2) DH16M-1601147 lbs.) 20 x 25 x 1(24H05) Exhaust Dampers -- (Net Weight> (Not Fce Areal GED16-95/135/160 (5 lbs.) (0.43 sq. ttj(34680) Differential Enthalpy CorWol 54(344 PFD16-185 (60 )bs./ (12917) Horizontal Supply and Return Air Kg -- (Net Weight) L - 7153681,(ir lbs.) LB- . 35G421 (21 16 -- 5 7568C (42 tbs.) (51G27) 8otton Power Entry Kit -- (NO Weigh') L8-55757CA (12 t s.)134(3701 4200 Furnished Ceiling Supply and Fleturn Air Diffusers (Net Weight) ep-Dewn RTD11.95 (88 lbs.) (29G04) T 1-1 2$ .1 . (3) 1/4 RTD11-185 (392 lbs.! (29606) F ush FD11 95 (75 lbs.) 129G051 FD11-135 (95 Ib5.) (29009) HorizontalSupply and Return Air Kit -- (Net Weight) FD11 185)289 lbs.) (29610) Transition SRT16-95 (29 lbs.) 133096) SRT16-135 (38 )bs-) (979101 Step -Down S T 1 (70 (3.1 (971111) utdoor Air Dampers — NOt Weghti No. & size of filters tin.) OAD1 (41 lbs.) (1>16*20 x 1 (350261 0A016 135 (43 kW,) (1)16x 20 x 1136G251 (1) 006-160 (45 lbs.! 16 x 20 x 1 (51030) Automatic OAD16 Damper Kit — (Nut Weight) 3521 (7 )bs.) SRT16-185 (75 lbs.) (97912) Low Ambient Control Kit LB -571138G (15J80( 18-5711389 >16386! OAD tb- 185 (120 tbs.( (1) 25 x 27 x 1 (121103) LB -5711313J (16387) Timed -Off Control Kit (21 LB-50i09A 40020 • *For LPG units a field conversion int wrequural and MUM be orderee extra GCS16-1853 Thru -3003 OPTIONAL ACCESSORIES iMust Be Ordered Extra) Unit Model No, 16-185 GCS1 2553, 0CS16-2753 & GCS16-003 **LPG Conversion Kit _ L13-81509DA 112(131) LR-81509DA (121431)12 required on -470) Roof Mounting Frame — (Net Weight) ...-- RMF16 185 (127 lbs.) (12H05) RMF16-300 (180 lbs.) (411104) Economizer Dampers with Gravity Exhaust— (Net Weight) No. & size of filters (in.) REMD16M-185 (160 lbs.) (21 25 x 25 x 1 (40914) 6M-100 (210 lbs.! ( 20 x 25 x 1 (44H47) Differential Enthalpy Control 54G44 Optional Power Exhaust Fans Down-P)o Oniy) Model o. N (Net Weight) 208/230v D16- (60 lbs.) (129161 PED16-300 (91 lbs.) 1449791 460v PFD16-185 (60 )bs./ (12917) PED16-300191 (bs.) (44980) Diameter (in.) & No, u( 81arje5 (21 16 -- 5 .. Total air volume (dm/ 4200 6300 Molor Horsepower 12) 1/4 (3) 1/4 Watis input (MAO 500 750 HorizontalSupply and Return Air Kit -- (Net Weight) LB -5)j15680152 lbs.) t12t1041 LB 557588E (60 lbs.! (41923) Ceiling Supply and Return Air Diffusers (Net Weight) Step -Down RT - 8 392 lbs.) (29006) RTD11-275 (463 lbs.) (29007) F ush rot 1-185 (289 lbs.) (29G10! FD11-2751363 lbs..) 1296111 1rausion SRT16-185 (75 lbs.) (97912) SRT15-300 (120 lbs.) (971413) Outdow Air Dampe s — (Net Weight) o. & size of filters On.) OAD tb- 185 (120 tbs.( (1) 25 x 27 x 1 (121103) 0A016-300 (84 lbs-) (1) 26 x 31 x 11401447) Automatic OAD16 Damper Kit --- `e 1 85621 (7 1 s.) Low Ambient Control Ka ..... LB -571138K (16.188) L8-57 11311L (16389) or I PG tarts Afu tr,WiltSiOrl kit IS ffIritorcif avo ,,alst /dared extra. -- 12— Project: Taco Bell -Tukwila Prepared By: 12.5T GasEle 03/23/2018 11:16AM ri-c__0--EA 12.5T GasEle Tag Cover Sheet Unit Report Certified Drawing Performance Report Unit Feature Sheet Packaged Rooftop Builder 1.49f REVIEWED FOR CODE COMPLIANCE APPROVED MAY 01 2018 City of Tukwila BUILDING DIVISION RECEIVED CITY OF TUKWI! A AM17213 PERMIT CENTER t411015 Page 11 of 20 36 1/4" — 331/4 21 15015" T 17 9/16- RETURN AIR SUPPLY AIR 6 I -re4ie-33 12212 iox\ 00809s REV. DESCRIPRON DATE I APPROVED 6/23/2006 INSULATED PANEL 53 7/16- 10' Notes: 0. 1.5 ADDED 30 02.0 CURB 0.0 2. MATERIAL: 18 ga. GALVANIZED STEEL 3, GASKET PROVIDED WITR! CURB a INSULATION: 1.1 1/2 LEI DENSITY 60' I 27 ;/16" EXISTING CURB LAYOUT 58 112 33 5116' SUPPLY 301/4 51 36, RETURN —4— 27 1/16' CURB SHOWN IS CDI STANDARD CONFIGURATION CDI RESERVES THE RIGHT TO CHANGE LAYOUT WITHOUT NOTIFICATION. IF CURB IS NEEDED IN A DIFFERENT CONFIGURATION CDI MUST BE NOTIFIED PRIOR TO PLACING AN ORDER. 92107 81 3Al• 2r ; -I 54- C1.18.0 aart.1 APIA 2788 IMPS .44226:=.6.664.4 Dec,Ww 02 2011 26.20 1-2015-4005 QUOTE #: NOTE ANY CNANGE3 -CALL WTIN ANT CrWS110145 KA.2 OA= ORAWING 13 OK XS IS • 175Pa TYLER ST NW ELK RMER, FAN 55330 (263T391-8280 (263)391-7651 tto 1-2015-4005 46-tt 1:25 I .66 Project: Taco Bell -Tukwila Prepared By: Unit Feature Sheet for 12.5T GasEle 03/23/2018 11:16AM WeatherMakef — 48TC PACKAGED ROOFTOP GAS HEATINGIELECTRIC COOLING UNITS 3, 4, 5, 6, T,5, 6.5, 10, 12.5, 15 TONS Opuunal Low-ctedHi1Oustxd Shown AURAE communr ViEATIIERMAKER SERIES e3tbermaker {4 TC; units ate one.pleca gas heating, etectne coormq units that are pr''- d and charged with Puron (R-410) refrigeran4 They are factory tested in both heating and cooling modes, and rated in accordance with AHRI Slaridaids 2101240 04,06 eu and 3403$0 (07.16 slzes) weaTherMaker un,,ts are dente in accordance with UL Standard 1995. and listed by the Underwriters' Laboratories AVM C04111100, Of • Certified to ISO 9001 STANDARD FEATURES INCLUDE: Patein WA!. 4FC aengetant * *-E•ORAE 50 1 isaargy ocergearq * Semi compessons Ade elieme; Ile break and ovenoed protecton • S nofe-siege *ea' no cepa-Ply conaolon 04-12 models • Two -stege cooev Impact,/ controf an 08-15 models * SEERa EERs op to 11,1 end IEEksupto 11 8. • aeutne*'. ffellA4MMIC.C.,401 * EX440'M 1,bn.ttbvb-140 baltmAla Andanaata OA, A attuala• nae anta ASHRAE Sienditd452, stp,ng deagn. sde ',weer them Saotonc is t 15'F (45'C) end down to 43'F (r -C) - down to 25=c (-V C) attn Oenter start Kt * P,4-4,20,tbd aAar'Wpaand ntivitriciVICS 4411ttli 10 O now -meat way 0.410.*el • anuletericea,net Eta:43N* 1.3Dsoi-state ormrzu ftiT -bawd 4 -agnostics a&r1 LED entt r coda. desonsto n bumencoMM bg end energy swing indoor len motor desy • Low liax modeeat 1Gom,aA Quaey Management • dLead cast' Ty4k3 ht at mato/taus, deign Radu talent get ve•dove•ta up to en, sfsg*s. *siting * L.dds pressude snd nth pfeSSu'es*Stn protecbssi MAINTENANCE FEATURES. • Mea 011,44Ve1, 41111.y9e0 hS1d4.1. * sots,* *SSo-Psd szliws an drat *odes* pinets Two,,nch deposetae retton ast!srs and Too**ss -Clef *mess door * anect Drive EM' 3 to 5 Ion (-5 vsitage toot)) modals and beldrive ayaborekw-fen frl&ar and gn.OeyrAmbinations available on a-:rmodeis • New temane. toad fatAtatog seat; mut tbublasr",botng f441 04M-VVVA tellifVest • Erre:wit: )0c so!' d.ststa con/* tot zmUdtsd dstvdosizs sit* LED edsdr *ode den/tatted, b1.1.1nef 00,MmIlogro and *nem y a -6'0m indoor fen motor deeq INSTALLATION FEATURES 'raMt*-rootitiim, Cower arillyeteribliay • d;* ddvd gas snd 4,iteht owtni,ttioris Cu' penmeteY bee* rAct wan bu:•-.;n *Jam adapters end folaskes • cee conyed'Ote from vedre, twanzont0 rtaw for slab moonting. 'nod e '-qu-a fied-n.#.ered silen1y duct covet). STANDARD WARRANTY: • 10.-yairor neat emaeng* r 1 a1an1eu stee• optan • 5,year comoresso, 1-yeer parts * 3 -year parts o- No--,,wton Sondense,t1As -where eve • a,-Utry opteona .,ogaide Cur ireVable OPTIONS INCLUDE BUT ARE NOT LIMITED TO: a Pa sdd RID ()pen Muti-PrdisceDDC Contr-'la • &mot( and Retdm **Smoke Det*dtds. lisgh ststz radio - 4 LO-ovieed bend -anew d.O0 gueVa * Economeetr, dmannact and cAnotro-Ante outfit olgone * Sterasie Si.* hest each anefoaton • Canosion tess*,*ntda,3 c4)44i;119 • Km:414442.er adaptive deaurrOdifostion sW,anneveasbie on models with 1 condenser-coCs- Motor feeer commaer *whirled * 4egad siodssd ponies ft 1=1'40 Arms anO AzAworaertio N 2.A 0:AC-Alio;tJmom, Packaged Rooftop Builder 1.49f Page 20 of 20 36 1/4" 33 1/4" 41 15/16' 17 9/16' INSULATED PANEL r 53 7/16" Notes: 1. 1.5" ADDED TO OLD CURB 0.0 2. MATERIAL 18 ga. GALVANIZED STEEL 3. GASKET PROVIDED WITH CURB 4. INSULATION: 1" 1 1/2 LB DENSITY 60" 1— 2' DIMENS10.0 AND TOLERE 'MED PER AliS1 VIA SIA -1982 Attn: Tag: Approval: 1 271/16" 30 /4' 61 3/4' EXISTING CURB LAYOUT 58 1/2" 33 5/16" – 5" 27 1/16' j CURB SHOWN IS CDI STANDARD CONFIGURATION CDI RESERVES THE RIGHT TO CHANGE LAYOUT WITHOUT NOTIFICATION. IF CURB IS NEEDED IN A DIFFERENT CONFIGURATION CDI MUST BE NOTIFIED PRIOR TO PLACING AN ORDER. 92 1/2" REVISIONS DESCRIPTION DATE APPROVED 6/23/2006 RETURN AIR% �� SUPPLY AIR 81 3/4" 20" 1 94' 7" (MS APPROVALS 278.58 :7r cotva,es DATE ""'m'.^iLie Fn0ay, December 02, 2011 126:20 PM 'VERIFY SUVPIT AHO RETURN OPENINGS `nnn .''PT 17560 TYLER 6T NW 'NOTE AN708850(5 f1(763)391-7190IV R,. UN 55330 F%BACK F OR.IOWIENO IS OK I As r .:m . I®� 763391-7651 1-2015-4005 QUOTE #: 1-2015-4005 A .u. 1:35 I net, v 3 Project: Taco Bell -Tukwila Prepared By: Unit Report For 12.5T GasEle 03/23/2018 11:16AM Unit Parameters Unit Model: Unit Size: Volts -Phase -Hertz: 48TCDD14A3A5-0A0G0 14 (12.5 Tons) 230-3-60 Heating Type: Gas Duct Cfg: Vertical Supply / Vertical Return Low Heat Round Tube Plate Fin Coils Lines and Filters Gas Line Size: Condensate Drain Line Size: Return Air Filter Type: Return Air Filter Quantity: Return Air Filter Size: 3/4 3/4 Throwaway 4 20 x 20 x 2 Unit Configuration High Static Option (Belt Drive) AI/Cu - AI/Cu Base Electromechanical Controls Standard Packaging 2 -Speed indoor fan motor controlled by VFD Warranty Information 1 -Year parts(std.) 5 -Year compressor parts(std.) 10 -Year heat exchanger - Aluminized(std.) 15 -Year heat exchanger - Stainless Steel(std.) No optional warranties were selected. Dimensions (ft. in.) & Weight (Ib.) *** Unit Length: Unit Width: Unit Height: ••* Total Operating Weight: T 4.125" 4' 11.5" 4' 1.375" 1277 lb "* Weights and Dimensions are approximate. Weight does not include unit packaging. Approximate dimensions are provided primarily for shipping purposes. For exact dimensions and weights, refer to appropriate product data catalog. NOTE: Please see Warranty Catalog 500-089 for explanation of policies and ordering methods. Ordering Information Part Number Description Quantity 48TCDD14A3A5-0A0G0 Rooftop Unit 1 Base Unit High Static Option (Belt Drive) None 2 Speed Fan Controller (VFD) Accessories CRECOMZR069A01 LOW LEAK - Vertical EconoMi$er 1 Packaged Rooftop Builder 1.49f Page 12 of 20 Project: Taco Bell -Tukwila Prepared By: Certified Drawing for 12.5T GasEle 03/23/2018 11:16AM I. 0(X(311035 03( IN (1CN(0. 0(3030(035 IR 1 1 ARE I1 11001X01(36. 2. (9 CENTER Of 6RAV0T1 3 140 0(3FCII33 OF AIR VLSI UNIT 0210003 COIL 1141 N 1 1310.014 NCNI I -IN 19811 141(-011 RIPE 5 '/R 11011 R190 • 01X0 RCNR-_OV811041 111E. PLATE FIN 1C089[9:8.111N CALUNAALUNI FILTER !DISPOSABLE ACCESS PANEL (MEM 1 N N CONDENSER COIL P10'D 0011 (0UM 242 LL yOO : L, W NMI 0011 BALA 0x000 � RIF2 I 1 (CONN 12E8 (002 -0 Srl 10ETIONAl1 152°1 911 jI21155i51 191 295/8 - nsn 11001 X2(20(10 DRAIIN NSASEPIX 50 zr1lslP; ' -Irl 1811 6 04 11591 0)09((1100 ((0ES 0" 1351 DIA (((LD POWER SUED/ xo 2 112" 1611 DIA POWER SUPPLY NNOCNUUI C -/1' 1511 DIA GAUGE ACCESS P1 Y 12:1 EIA 3(110 EONFRn SIRIN0 xOLE 1 1 RPI CONDEN:AI[ DRAIN 1/1'-11 NPT GAS COIIN(111ON 1 DIA POWER SUPE OUT Ix(U-T0E-9A;E MC NM 11O(5 REWIRED IDR NSE (RNTNPIN002A01,0R1AD1 IODINE NIA( P10'D 0011 CONDUIT SIZE USE SAES (01Y W NMI ® v ACC ,1V 11' ISP 21 LOIS 122 1 11/1 !nnz. nn , vR ort 1 yr u 12;1 ® 10041 ale' IPI 10. I i/E' III 31 'MU IN(-0AS(,AN' I CCORI OPTION ■ISR F1 112OW 4.; (10 OY. 6 2 ORE PROVIDED (0021 9306(0ES Il' 041 1X11 (ARO FLANGE GE 6 FITTING. 00NDEN5(R _OIL O 1WET—'- 1-00AC1OPY INSTALLED CONVENIENCE 0 OUTLET FRONT 1 .r, 1 (0-04-111 3111.111(101, 083.0-10 4810 (4 SINGLE ZONE ELECTRICAL. C)OLIN, WITH 3AS FEAT 4GTM50(441 1F� Packaged Rooftop Builder 1.49f Page 13 of 20 Certified Drawing for 12.5T GasEle Project: Taco Bell -Tukwila 03/23/2018 Prepared BY 11:16AM OH1140 6516006 SID U617 6116X1... (646(6 6116x7 IA1 (06646 611661 461 (016(6 W.I. ICI 006616 6116x101 IOC (.6 465 66 155 66. 165 96. 495 66. 165 0. I 4643.011 6191 1119 006 697 115 191 11 }}9 104 434 191 }9 I/t411074 JI 1/6 t34 Ill ;:;:HILJ 1(I'11�1 iJ 41911 11 Jll 1l ISMI 1670.011 9791 1161 530 119 199 161 76 }11 96 440 }00 6171 - 60066 7094. MATE 776 IC09P(6/*4661 6166 - 64C60CMAN61L 44146441564 CORNER A � uHlrm 11 AR81IIX01440 mMuft.I� r 14461.563 0917 6116X1 1-i 6114 1'p 9.45 `441 161. 641N01p ?4148*i1NI-. 106 01x(1 0511065 500 5((14461141, [146 3 1x4 76009(1 5 [R I L 141,131 LURIIEl E COPE 4 c r61Or r10: -lo 08-30-10 4810.14 SINGLE ZONE ELEC TRIAL 4ZT11501441 COOLIE WITH GAS HEAT Packaged Rooftop Builder 1.49f Page 14 of 20 { } 1 IOC [`—'7 . : 00; 141,131 LURIIEl E COPE 4 c r61Or r10: -lo 08-30-10 4810.14 SINGLE ZONE ELEC TRIAL 4ZT11501441 COOLIE WITH GAS HEAT Packaged Rooftop Builder 1.49f Page 14 of 20 Project: Taco Bell -Tukwila Prepared By: Performance Summary For 12.5T GasEle 03/23/2018 11:16AM Part Number:48TCDD14A3A5-0A0G0 ARI EER: IEER: Base Unit Dimensions Unit Length: Unit Width: Unit Height: Operating Weight Base Unit Weight: High Static Option (Belt Drive): 2 Speed Fan Controller (VFD): Accessories LOW LEAK - Vertical EconoMi$er: Total Operating Weight: 10.80 12.2 88.1 in 59.5 in 49.4 in 1167 Ib 15 Ib 20 Ib 75 Ib 1277 lb Unit Unit Voltage -Phase -Hertz: 230-3-60 Air Discharge: Vertical Fan Drive Type: Belt Actual Airflow: 4800 CFM Site Altitude: 0 ft Cooling Performance Condenser Entering Air DB: Evaporator Entering Air DB: Evaporator Entering Air WB: Entering Air Enthalpy: Evaporator Leaving Air DB: Evaporator Leaving Air WB: Evaporator Leaving Air Enthalpy: Gross Cooling Capacity: Gross Sensible Capacity:. Compressor Power Input: Coil Bypass Factor: Heating Performance Heating Airflow: Entering Air Temp: Leaving Air Temp: Gas Heating Input Capacity: Gas Heating Output Capacity: Temperature Rise: Thermal Efficiency (%): 95.0 F 80.0 F 67.0 F 31.44 BTU/Ib 60.0 F 57.3 F 24.59 BTU/lb 148.00 MBH 103.80 MBH 10.20 kW 0.245 4800 CFM 70.0 F 98.5 F 120.0 / 180.0 MBH 98.0 / 148.0 MBH 28.5 F 82.0 Supply Fan External Static Pressure: 0.60 in wg Options / Accessories Static Pressure Economizer: 0.30 in wg Total Application Static (ESP + Unit Opts/Acc.): 0.90 in wg Fan RPM: 1074 Fan Power: 3.78 BHP NOTE: Selected IFM RPM Range: 1022 -1240 Electrical Data Voltage Range:. 187 - 253 Compressor #1 RLA: 19 Compressor #1 LRA: 123 Packaged Rooftop Builder 1.49f Page 16 of 20 MicroMetl Date: 6/19/2017 Weights: 701bs/31.75kg Units: Part Number: ECDSRT34CA-D2DH Submitted To: shumphries©airefco.com Job: Notes: Economizer - Ultra Low Leak Economizer, Adjustable Dry Bulb Sensor, Honeywell Hardware Included. Economizer Hamess With PL6 Plug—"--•.ti.,,,__ Communicating Actuator f % t x e }..3' External Gear/.., Driven Dampers Vertical Orientation, Honeywell Actuator. Painted Rain Hood ,,, .T '� 23 tys �,. s 10il {r $ i%• .� f. Outside Sensor _._„„„ Knockouts for "`Wiring for Optional Prop Power Exhaust Jade W7220 Single/Multiple Speed With Aluminum Filter, Barometric Relief, F aooess Door Provided On UM 3/18" Electromechanical Controller, All Necessary Panels And Microktelf Fags Y (2 3 R "e,.+" , Side Vie W as -e.. — Barometric Relief �e Damper E1��i1 -C As }{ted ............. The Information contained in this drawing is the sole property of Micrometl Corporation. Any reproduction in part or whole without the written permission of Micrometl Corporation is prohibited. Indianapolis_3035 N. Shadeland Ave., Indianapolis, IN 48226_800.MMC.HVAC •• Sparks_905 Southem Way, Sparks, NV 89431_800.884.4MMC •• Longview_201 Kodak Blvd., Longview, TX 75602_903.248.4800 MieroMetl Date: 6/19/2017 Weights: 701bs/31.75kg Units:Part Number: ECD-SRT34CA-D2DH Submitted To: shumphries@airefco.com Job: Notes: Economizer - Ultra Low Adjustable Dry Bulb Sensor, Hardware Included. Compliant Ecorfomizer Leak Economizer, Vertical Orientation, Honeywell Jade W7220 Single/Multiple Speed Electromechanical Honeywell Actuator. Painted Rain Hood With Aluminum Filter, Barometric Relief, All Necessary Panels meet California Energy Commission Title 24-2013 i 2016 prescriptive section 140.4 (damper leakage etc.), and mandatory-section 120.2.1 for (JADE HJW 10). meet ASHRAE 90.1-2013 / 2016 damper leakage requirements as stated in Table 6.4.3.4.3., and meet 2016 Fault Detection and Diagnosis 6.4.3.12. IECC 2012 section 0402.4.5.2 and, IECC 2015 sections C403.2.4.3 and C403.3.3.5 for outside air, return, air, and relief damper (when provided) 2015 section C403.2.4.7 for Fault Detection and Diagnostic requirements. Note: IECC 2015 section C403.2,4.7.1 requires differential return (i.e. 02XH) and must be ordered separately on others 11.e. D2DH, 02ZH). return air (volume) dampers are AMCA Class 1A rated at 1° wig. Refer to MicraMetl NSI talog sheet on web site for details. Relief air dampers rated. Refer to GRI series catalog sheet on web site for details. indoor fan units -with Central Terminal Board (C79). Other control options available. trouble-free operation, eliminating slippage and binding associated with standard linkage. with aluminum water entrainment filters in the outside air section. water run-off damper provided. Power exhaust options available. needed are provided.'°•. access door shipped with HVAC unit, MicroMeti door option is installed on unit, an additional kit is required to seal hinged door properly. cedillas G121 or MicroMeti part number 0640-0200-HDANGL herein the the based Honeywell W7220 JADE controller, mixed tsupply) air temperature sensor, OA sensor in description, and spring-return procedures (some include differential return sensor as notedi. aaomanco511 Pudikalion is field mounted in unit's control box. comply of the is field installed in indoor blower fan section. Ratings The (included in'-D2XH" and "-D221-1 models or can be ordered separately MicroMeti Part No. 9901-2022-DIFF JC2)is field p Y' � Ratings tone Performance 24 require the economizer controller be capable of reporting faults to a fault management application accessible by service personnel. or annunciated locally on zone thermostats or in some codes other devices are acceptable. Refer to and to MicroMeti instructions for suggestions. ntodi'sis without the Central Terminal Board the "-D2" part number le repteced:by °-DJ'. (See separate submittal). - Controller, And Fault Detection leakage air sensor, which (when 1. Title 24: Economizers and Diagnostic controls 2. ASHRAE 90.1: Economizers requirements in section 3. ECC: Economizers meet requirements, and IECC is included to some models 4. AMCA: Outside air and provided) are also AMCA features; NIR .oar ., ,co roc.,S corporation that the models and NS1 shown me licensed to bear AMCA Seal. ratings shown are on tests and performed in AMCA 511 and with requirements AMCA Coddled Programs. AMCA Certified seat applies Leakage and Air ratings. • For single, 2 or 3 speed • Gear driven design for • Includes assembled rainhood • Rainhood is sloped far • Built-in barometric relief • All harnesses and plugs • Uses standard factory filter • If factory hinged access - OEM part no. CRPECONV004A00 ,Notes;, 1. Control systems include communicating actuator 2. JADE W7220 controller 3. Mixed (supply) air sensor 4, Differential return sensor installed in return duct. 5. ASHRAE, IECC. and Title day-to-day operating or applicable code requirements 6. For older single speed The Information contained in this drawing is the sole property of Micrometl Corporation. Any reproduction in part or whole without the written permission of Micrometl Corporation is prohibited. Indianapolis_3035 N. Shadeland Ave., Indianapolis, IN 46226_800. MMC. HVAC •• Sparks_905 Southern Way, Sparks, NV 89431_800.884.4MMC •• Longview_201 Kodak Blvd., Longview, TX 75602_903.248.4800 Certified Drawing for 12.5T GasEle Project: Taco Bell -Tukwila 03/23/2018 Prepared By: 11:16AM Packaged Rooftop Builder 1.49f Page 15 of 20 Project: Taco Bell -Tukwila Prepared By: Performance Summary For 12.5T GasEle 03/23/2018 11:16AM Compressor #2 RLA: Compressor #2 LRA: Indoor Fan Motor Type: Indoor Fan Motor FLA: Combustion Fan Motor FLA (ea): Power Supply MCA: Power Supply MOCP (Fuse or HACR): Disconnect Size FLA: Disconnect Size LRA: Electrical Convenience Outlet: Outdoor Fan [Qty / FLA (ea)]: 22.4 149 HIGH 12.7 0.48 66 80 69 392 None 1 / 6.2 Electrical Data (Units produced on or after 02/16/2015 ) Compressor #1 RLA: 19.6 Compressor #1 LRA: 136 Compressor #2 RLA: 22.4 Compressor #2 LRA: 149 Power Supply MCA: 67 Power Supply MOCP (Fuse or HACR): 80 Disconnect Size FLA: 70 Disconnect Size LRA: 405 UNIT(s) INSTALLATION LOCATION Control Panel SCCR: 5kA RMS at Rated Symmetrical Voltage Acoustics Sound Power Levels, db re 10E-12 Watts Discharge Inlet Outdoor 63 Hz 98.6 95.0 87.0 125 Hz 95.9 89.2 85.2 250 Hz 84.0 74.5 84.6 500 Hz 78.1 70.2 84.9 1000 Hz 74.8 68.2 82.2 2000 Hz 71.6 64.2 78.4 4000 Hz 75.1 64.6 75.3 8000 Hz 77.1 62.2 72.9 A -Weighted 84.9 77.1 87.0 Advanced Acoustics Advanced Accoustics Parameters 1. Unit height above ground: 2. Horizontal distance from unit to receiver: 3. Receiver height above ground: 30.0 ft 50.0 ft 5.7 ft Packaged Rooftop Builder 1.49f Page 17 of 20 Project: Taco Bell -Tukwila Prepared By: Performance Summary For 12.5T GasEle 03/23/2018 11:16AM 4. Height of obstruction: 0.0 ft 5. Horizontal distance from obstruction to receiver: 0.0 ft 6. Horizontal distance from unit to obstruction: 0.0 ft Detailed Acoustics Information Octave Band Center Freq. Hz 63 125 250 500 1k 2k 4k 8k Overall A 87.0 85.2 84.6 84.9 82.2 78.4 75.3 72.9 92.4 Lw B 60.8 69.1 76.0 81.7 82.2 79.6 76.3 71.8 87.1 LwA C 54.6 52.8 52.2 52.5 49.8 46.0 42.9 40.5 60.0 Lp D 28.4 36.7 43.6 49.3 49.8 47.2 43.9 39.4 54.7 LpA Legend A Sound Power Levels at Unit's Acoustic Center, Lw B A -Weighted Sound Power Levels at Unit's Acoustic Center, LwA C Sound Pressure Levels at Specific Distance from Unit, Lp D A -Weighted Sound Pressure Levels at Specific Distance from Unit, LpA Calculation methods used in this program are patterned after the ASHRAE Guide; other ASHRAE Publications and the AHRI Acoustical Standards. While a very significant effort has been made to insure the technical accuracy of this program, it is assumed that the user is knowledgeable in the art of system sound estimation and is aware of the tolerances involved in real world acoustical estimation. This program makes certain assumptions as to the dominant sound sources and sound paths which may not always be appropriate to the real system being estimated. Because of this, no assurances can be offered that this software will always generate an accurate sound prediction from user supplied input data. If in doubt about the estimation of expected sound levels in a space, an Acoustical Engineer or a person with sound prediction expertise should be consulted. Packaged Rooftop Builder 1.49f Page 18 of 20 Project: Taco Bell -Tukwila Prepared By: Performance Summary For 12.5T GasEle 03/23/2018 11:16AM FanCurve — 100oiTM Q4 ;, 02 O 07 07 14 21 28 35 42 49 AIrllcw(CFM-thousands) ) RPM=1074 BHP=3.78 MaximuinRPM=1400 MaximumBHP=4.70 Note: Pleasecontactapplicationengineeringforselectionsoutsidetheshadedr egion. SC- System Curve RP-RatedPoint Packaged Rooftop Builder 1.49f Page 19 of 20 Loae�� SUBMITTAL Project Taco Bell -Tukwila Date Friday, March 23, 2018 REVIEWED FOR CODE COMPLIANCE APPROVED MAY 01 2018 City of Tukwila BUILDING DIVISION RECEIVED D CITY OF TUKWIL M 1 i 2013 PERMIT CENTER Mil OOqq TT - 17 T 17 9/16' INSULATED COVER 41 1511E- Ft.- 511E I-.— 331/4' —+ 36 l/a' 53 7/16" Attn: � Approval: 46 SAP 33 o/06" 88 518' Notes. IS ADDED TO OLD CURB 0.0 2. MATERIAL: 18 ga. GALVANIZED STEEL 3. GASKET PROVIDED WITH CURB 4 INSULATION: 1' 1 12 LB DENSITY 253 M LobFv-f 7 /i 1 66001ON5 REV. DESCRIPTION I OATS I APPROVED PnAL DWG I 12/2/11 I 00 EXISTING CURB LAYOUT SUPPLY: 19 314" — 23 3/4" --1 SUPPLY AIR RETURN 18 3/4- 2 114. 14'2114' 55 1/4' — 87 1/8" CURB SHOWN IS CDI STANDARD CONFIGURATION CDI RESERVES THE RIGHT TO CHANGE LAYOUT WITHOUT NOTIFICATION. IF CURB IS NEEDED IN A DIFFERENT CONFIGURATION CDI MUST BE NOTIFIED PRIOR TO PLACING AN ORDER. 81 3/4' T 20 481/8" --P-1 — 5' APPROVALS 288.09 7/5211-7 502,128 CURB 00 /NOTE Y8YUC LUW0ESRRN OPENINGS LGLLAN 1ANY GOEs110N5 15A%BAIXiF WNWMG 6ON is IS WeAPesday. 0028226 1 43101 A. 1-2010-4005 QUOTE #: 17560 TYLER STNW DI 763;361 3 N 15330 1-2010-4005 1.25 I .vot 1 Project: Taco Bell -Tukwila Prepared By: 7.5T GasEle 03/23/2018 11:16AM 7.5T GasEle Tag Cover Sheet Unit Report Certified Drawing Performance Report Unit Feature Sheet Packaged Rooftop Builder 1.49f Page 2 of 20 Project: Taco Bell -Tukwila Prepared By: Unit Report For 7.5T GasEle 03/23/2018 11:16AM Unit Parameters Unit Model: 48TCDD08A2A5-0A0G0 Unit Size: 08 (7.5 Tons) Volts -Phase -Hertz: 230-3-60 Heating Type: Gas Duct Cfg: Vertical Supply / Vertical Return Low Heat Round Tube Plate Fin Coils Lines and Filters Gas Line Size: _ 1/2 Condensate Drain Line Size: 3/4 Return Air Filter Type: Throwaway Return Air Filter Quantity: __ 4 Return Air Filter Size: 16 x 20 x 2 Unit Configuration Medium Static Option (Belt Drive) AI/Cu - AI/Cu Base Electromechanical Controls Standard Packaging 2 -Speed indoor fan motor controlled by VFD Warranty Information 1 -Year parts(std.) 5 -Year compressor parts(std.) 10 -Year heat exchanger - Aluminized(std.) 15 -Year heat exchanger - Stainless Steel(std.) No optional warranties were selected. Dimensions (ft. in.) & Weight (Ib.) *** Unit Length: 7' 4.125" Unit Width: 4' 11.5" Unit Height: 3' 5.25" *** Total Operating Weight: 945 Ib Weights and Dimensions are approximate. Weight does not include unit packaging. Approximate dimensions are provided primarily for shipping purposes. For exact dimensions and weights, refer to appropriate product data catalog. NOTE: Please see Warranty Catalog 500-089 for explanation of policies and ordering methods. Ordering Information Part Number Description Quantity 48TCDD08A2A5-0A0G0 Rooftop Unit 1 Base Unit Medium Static Option (Belt Drive) None 2 Speed Fan Controller (VFD) Accessories CRECOMZR069A01 LOW LEAK - Vertical EconoMi$er 1 Packaged Rooftop Builder 1.49f Page 3 of 20 Certified Drawing for 7.5T GasEle Project: Taco Bell -Tukwila 03/23/2018 Prepared By: 11:16AM MOILS. 1141"108441M MILLIM0(FIIS DIMEMSIDMS 3 DIRECTION OF NIP FLOW FILTER ACCESS PANEL (100L -LESS) IMOOUN COIL A.. C. S- 411111 UNIT 181C•AO0 ROTC -AOR 1810 -sit INTC•DDN OUTDOOR COIL TYPE 3 A TPI 11I0181ll AIPF 111 9 3 531B 3583 111531 3181 Ill n11 D1RI 4810 DOR 4800 -DIC 1831.008 AIPF 19 3/8 111531 8101 12 19 901 38 11 111 10181 1833-013 MC M, 111 19 9310) IPF • NOON TURF, PLATE FI 3 MCN, - NOVA ION '.RNIALUMI CONDENSER fOlt IH NNOLCLII6 saline[ •.� NUR "»1 I 11016'. 1 F [060X( 111 N[•OD [511!1 1 CPIIOHALI - 'ZIT PAXLt 40.11x11 -� I C10(Y INAARED D's6ONx1E• HAM DLMT, I 11 C - 9 JIB —1 1111 BR 8 RON 1. - .1; hIIT 10101 N. RD [X3003 8114(0 AC !SS 11,1 } 6 SA, 11611 131 CONNECTION SIZES Al. 0111 DIA FIELD PONTA 5(481 16 0011 P' 1641 DIA POWER SUPPLY 11600001 AIA. 1511 DIA 61..6E 1E3F35 PC66 :111 DIA 133,1 01 :0X(0CPI.NOEL 3/A . N6I CONDENSATE DRAIN- - _ II". II N^' 6AS CONK, 1106 -- 3I4'11 NP' 645 1088EC11ON 6 i ' 1511 DIA P08ER 304411 NNOCN-Du1 BH RU PIE 0(01 01-IARf 11 ITl0 1 N I1 THESE 01(1 830(08(3 (03 030 11I10 4(0, NITS. ,3140 ROA4A01 6AS I NRU CA IRE 8004401 6A. TH BAS U (°AN 148[4011 dr.P.Fr R10 D Nql. CONDUIT ;IIS 1 OSE SI:3S (MAI 1 • 1•t" N fii 11 CIA' 11� I Y 1 Ila' 1001.0011 ! PONFA 1 311" 111 el 1 1 CFO, 311" TPI 615 I 31 41.41 71 PROVIDES 311.' [PT TRU AIM • C3AN61 A 1111:X6- HOLE SAI 2.. 150.01 144q-11)1-NASF CHER? 1-'04: 1 FOR 'T 36F.HASFRAW FACTOR, OFI105 F,TIN 5 FOR ONE` Y Y I 1 ARE AMOvi OLD 66 eda 1311b NODE(A !ICAO P S , IED '4' ADAPI!0 I3s. 360(111, •' Bf'BT TN BASE PAN (1A 1,4E ANO SAS VA'., ARRC ..8 II 1;0 'IOt: E AIC -,146400 6,16DE054I3 11 - '1 RN t4 611 0,• A.0 SUFI Y AIR R 611 J t -JIB RETURN RIG I I6 31:115 L--- 131 RARO0EI81C Rtf LEI fLOW 34 OF. 103-08-10 j 11--24-08 Nil 4880 08 12 SINGLE 20N1 LLECTRICAL 0001ING WITH GAS HLA1 4804500985 I F Packaged Rooftop Builder 1.491 Page 4 of 20 Certified Drawing for 7.5T GasEle Project: Taco Bell -Tukwila Prepared By: 11:16AM 03/23/2018 UNIT 08TC-908 3U'006P COIL TYPE SID 4833 401 (R COP EP 308883 (000 P e61GNT ... 83881 61 861681 IBI 862 T C r 185. 80. LBS. 86. 185. 80. 405. 86. .55 6. 180 351 1160 /11 158 12 209 95 13137 41 '11 9.91 1. 1,0 10311 12 8li '33 1 ' 9 22 3 28 1 28 IC 110 I 3 1 4 12611 2. IR 5911 09 2 I 242 23 5 12 111 II 33 118 198 1 2 316 16161 11 2255 246 1 14 7/8 111411 35 518 19851 IB 308 11921 85 1 232 85.81 234 69.5' 240 39. 9 260 4814-409 015912 8066 A IPI 1 920 411 212 216 96 90 183 196 0 930 122 0813-008 025 319 4014.009 4014-012 1814-000 078E RIPE MCNR 130 422 940 421 805 365.5 164 228 211 160 14.5 110 103 5 181 104 9 109 12.6 153 4813.012 83X9 695 406.3 185 84 116 112 115.6 105.3 106 2 109 83 145. 285 4129 8 1 3(0131 11016; 32 110 10351 73 10391 !8 9211 118 1 121 6 43 1 5 '009 33 '112 1922: '1131 20 318 511 1111 24 718 058'I PIPE • POUND TUBE. 3191E 618 ICOPPE0I91941 36280 - 08811 N (4044/914x1 [6 11111119 .o 999 1 .CaPIOpLV'!cS 5.114945/ CURER A 33 00 C -1 : 00 CORNER CORNER C 1. �, 3-c 1 I r ' 68T.'. 08 1? ER F 'CNE E cFCTR1CM 6 2 3 :E8-' ' I ?1.08 C -CL 'NG NIT4 GAS aFFET 48EM500985 Packaged Rooftop Builder 1.49f Page 5 of 20 MicroMetl Date: 6/19/2017 Weights: 701bs131.75kg Units: Part Number: ECD-SRT34CA-D2DH Submitted To: shumphries@airefco.com Job: Notes: Economizer - Ultra Low Leak Economizer, Vertical Orientation, Honeywell Adjustable Dry Bulb Sensor, Honeywell Actuator. Painted Rain Hood Hardware Included. Economizer Harness - i . <-' with Ike Plug si ? 23 Communicating ,.p - s , t A .% Actuator � ✓ }tfj ./ i t. ,� `' //a � �,/^ EID - ',r'9 Outside u Sensor External Gear/ `. Knockouts for ! 5�-_....0"- Owen Dampers `— .""" wring for optional Pry Power Exhaust Jade W7220 Single/Multiple Speed With Aluminum Filter, Barometric Relief, Finer Access Door Provided on and - 3'118" Electromechanical Controller, All Necessary Panels And .. ._... ... � niters f f may' O 'f _ .,...:..._.' �' Yi@W ,\ � Barometric Relief Damper ,"\i / �� EW(g1131Zer V. Hood :..Side The Information contained in this drawing is the sole property of Micrometl Corporation. Any reproduction in part or whole without the written permission of Micrometl Corporation is prohibited. Indianapolis_3035 N. Shadeland Ave., Indianapolis, IN 48226_800.MMC.HVAC •• Sparks 905 Southem Way, Sparks, NV 89431_800.884.4MMC •• Longview_201 Kodak Blvd., Longview, TX 75602_903.248.4800 Project: Taco Bell -Tukwila Prepared By: Performance Summary For 7.5T GasEle 03/23/2018 11:16AM Part Number:48TCDDO8A2A5-0A0G0 ARI EER: IEER: Base Unit Dimensions Unit Length: Unit Width: Unit Height: Operating Weight Base Unit Weight: Medium Static Option (Belt Drive): 2 Speed Fan Controller (VFD): Accessories LOW LEAK - Vertical EconoMi$er: Total Operating Weight: 11.00 12.8 88.1 in 59.5 in 41.3 in 835 lb 15 Ib 20 Ib 75 Ib 945 lb Unit Unit Voltage -Phase -Hertz: 230-3-60 Air Discharge: Vertical Fan Drive Type: Belt Actual Airflow:. 3000 CFM Site Altitude: 0 ft Cooling Performance Condenser Entering Air DB: Evaporator Entering Air DB: Evaporator Entering Air WB: Entering Air Enthalpy: Evaporator Leaving Air DB: Evaporator Leaving Air WB: Evaporator Leaving Air Enthalpy: Gross Cooling Capacity: Gross Sensible Capacity: Compressor Power Input: Coil Bypass Factor: 95.0 F 80.0 F 67.0 F 31.44 BTU/lb 58.7 F 57.6 F 24.76 BTU/lb 90.10 MBH 68.90 MBH 6.40 kW 0.092 Heating Performance Heating Airflow: 3000 CFM Entering Air Temp: 70.0 F Leaving Air Temp: 101.8 F Gas Heating Input Capacity: 125.0 MBH Gas Heating Output Capacity: 103.0 MBH Temperature Rise: 31.8 F Thermal Efficiency (%): 82.0 Supply Fan External Static Pressure: 0.60 in wg Options / Accessories Static Pressure Economizer: _ 0.11 in wg Total Application Static (ESP + Unit Opts/Acc.): 0.71 in wg Fan RPM: 792 Fan Power: 1.80 BHP NOTE: Selected IFM RPM Range: 733 - 949 Electrical Data Voltage Range: 187 - 253 Compressor #1 RLA: 13.6 Compressor #1 LRA: 83 Packaged Rooftop Builder 1.49f Page 7 of 20 MicroMet! Date: 6/19/2017 Weights: 70Ibs/31.75kg Units: Part Number: ECD-SRT34CA-D2DH Submitted To: shumphries@airefco.com Job: Notes: Economizer - Ultra Low Adjustable Dry Bulb Sensor, Hardware Included. Compliant Economizer, 1. Title 24: Economizers and Diagnostic controls 2. ASHRAE 90.1: Economizers requirements in section 3. IECC: Economizers meet requirements, and IECC is included in some models 4. AMCA: Outside air and provided) are also AMCA Features: Leak Economizer, Vertical Orientation, Honeywell Jade W7220 Single/Multiple Speed Electromechanical Honeywell Actuator. Painted Rain Hood With Aluminum Filter, Barometric Relief, All Necessary Panels meet Catifomia Energy Commission Title 24-201312016 prescriptive section 140.4 (damper leakage etc.), and mandatory section 120.2. for (JADE HJW 10). meet ASHRAE 90.1.2013 / 2016 damper leakage requirements as stated in Table 6.4.3.4.3., and meet 2016 Fault Detection and Diagnosis 6.4.3.12. IECC 2012 section C402,4.5.2 and, IECC 2015 sections C403.2.4.3 and C403.3.3,5 for outside air, return air, and relief damper (when provided) 2015 section C403.2.4.7 for Fault Detection and Diagnostic requirements. Note: IECC 2015 section C403.2.4,7.1 requires differential return (i.e. 02X11) and must be ordered separately on others (i.e. 020H, 02211). return air (volume) dampers are AMCA Class 1A rated at 1° w.g. Refer to MicroMet) NS1 catalog street on web site for details. Relief an dampers rated. Refer to GR1 series catalog street on web site for details. indoor fan units with Centras Terminal Board (CTO). Other control options available. trouble-free operation, eliminating slippage and binding associated with standard linkage. with aluminum water entrainment fetters in the outside air section. water run -oft. damper provided. Power exhaust options available.�K,•„ needed are provided.e*>a access door shipped with HVAC unit. rawrofeen door option Is installed on unit, an additional kit is required to seal hinged door properly. certifies GR1 or MicroMet) part number 0640.0200-HOANGL herein the The based Honeywell W7220 JADE controller, mixed (supply) an temperature sensor, OA sensor in description, and spring-retum pmtedures {some include differential return sensor as noted). Publicationnce puhlY_allon is field mounted'=.n unit's control box. comply of drcAMCA is field Installed in indoor blower fan section. Ratings The in "-D2XH" and "-022H` models or can be ordered separately MicroMet! Part No. 9901-2022.DIFF JC2 is field P Y - ) Ratings to Air Performance 24 require the economizer controller be capable of reporting faults to a fault management application accessible by service personnel. or annunciated locally on zone thermostats or in some codes other devices are acceptable. Refer to and to MicroMet: instructions for suggestions. models without the Central Terninat Hoard the "-02" pert number is replaced by "-DJ". (See separate submittal) Controller, And Fault Detection leakage air sensor, which (when Rift "'""' 4111 m m. t. corporation that the models and Nb1 shown are rcensed to bear AMCA Sear. ratings shown ate on tests and performed in with AMCA 51 t and with requirements Certified Programs. AMCA Certifiedapplies Seal applies Leakage and Air ratings. • For single, 2 or 3 speed • Gear driven design for • Includes assembled rainhood • Ranhood is sloped for • Built-in barometric relief • All harnesses and plugs • Uses standard factory filter • If factory hinged access - OEM part no. CRPECONV004A00 Notes,; 1. Control systems include communicatingaccoractuator 2. JADE W7220 controller 3. Mixed (supply) air sensor 4, Differential return sensor(included installed in return duct. 5. ASHRAE, IECC, and Title day-to-day operating or applicable code requirements 6. For older singte,speed The Information contained in this drawing is the sole property of Micrometl Corporation. Any reproduction in part or whole without the written permission of Micrometl Corporation is prohibited. Indianapolis_3035 N. Shadeland Ave., Indianapolis, IN 46226_800.MMC.HVAC •• Sparks_905 Southern Way, Sparks, NV 89431_800.884.4MMC •• Longview_201 Kodak Blvd., Longview, TX 75602_903.248.4800 Certified Drawing for 7.5T GasEle Project: Taco Bell -Tukwila 03/23/2018 Prepared By: 11:16AM „.., - ..„.„ . ,„..... Service . Clearance . ,.. ,.., . ..... ...- ,0247 tCarsaalanY DIYEUSCni 0..7tit31101, • • Vail &tomcat ,a rnnuntaai on panel :• ,o1E.t.U.S.AS",:rAns Vs 0,1 frynl ' . ifilmen";;;TZI2.ne 0.. man, 1 4 ,B, i,57,4.0 • No d..aa,nrnnt cornakn.nce WIN octal i • Ran ornmended sev,entlemance inyy, eleCrs sonmnitiverl 1.24, (SOS mini • Minn.', dnaaame t tanannat tal the strew:10.1a 1 Y.. 36.1 014. ,...1 12.,nif,a5 amr.) i a dart has numannzer , .. .. 4 • Itclimerrann A ta:.,...6 in {914 nwn't Sanaa! • cfiear, anni;..i'., & Inn wocii;:l. 1.7aaalyn 104; a.m. ir,Ist .a.Y RN iiWitt.1 1 ;3b..1 ;314 ms) • Sidt comepsee dt alb uand l C 18,1 i457 mg) 4:3-.4 0.211 annY1 • Mammas CZI:,,y,y,..n • • tan ?kw akscharte ..resaomnstaajd. siiiaana ii—saamina,:aan-nuten7a1 - 1 {1067 at.* • Sp,aon b,hind senaana a, vanYnin'a (n.a; 0 041 14/4 rnrn) • fnAetam betlinal 5£9.V.94 K eaKincalty nc.-saraa,Vtve in.g.. wood, the -Vasil I Spetai a 41Inck tny attaitcynt Lanni -.0t byt,ang nein an Intakts vein., . 100 of tbs 041'1 ff. otn,et . ,... aFOIT: tann not *rasped tn nava namhaaTntii7,Z-'11.;:a. Costat.-aAppkntays E rirnny fay gananan m.t any - apinaal,nn {riannIns nyethead.Ontruatw na vert.at-,,nsararr..e.s. anmy - 1 Packaged Rooftop Builder 1.49f Page 6 of 20 Project: Taco Bell -Tukwila Prepared By: Performance Summary For 7.5T GasEle 03/23/2018 11:16AM Compressor #2 RLA: Compressor #2 LRA: Indoor Fan Motor Type: Indoor Fan Motor FLA: Combustion Fan Motor FLA (ea): Power Supply MCA: Power Supply MOCP (Fuse or HACR): Disconnect Size FLA: Disconnect Size LRA: Electrical Convenience Outlet: Outdoor Fan [Qty / FLA (ea)j: UNIT(s) INSTALLATION LOCATION Control Panel SCCR: 5kA RMS at Rated Symmetrical Voltage Acoustics Sound Power Levels, db re 10E-12 Watts Discharge Inlet Outdoor 63 Hz 98.4 95.5 85.8 125 Hz 91.6 86.5 84.3 250 Hz 78.4 73.8 80.5 500 Hz 71.1 66.7 78.7 1000 Hz 67.8 63.9 76.4 2000 Hz 66.4 59.0 72.7 4000 Hz 67.8 58.5 68.3 8000 Hz 70.3 58.0 65.1 A -Weighted Advanced Acoustics 79.8 74.8 82.0 Advanced Accoustics Parameters 1. Unit height above ground: 30.0 ft 2. Horizontal distance from unit to receiver: 50.0 ft 3. Receiver height above ground: 5.7 ft 4. Height of obstruction: 0.0 ft 5. Horizontal distance from obstruction to receiver: 0.0 ft 6. Horizontal distance from unit to obstruction: 0.0 ft Detailed Acoustics Information Octave Band Center Freq. Hz 63 125 250 500 1k 2k 4k 8k Overall 13.6 83 MED 7.8 0.48 42 50 44 227 None 2/1.5 Packaged Rooftop Builder 1.49f Page 8 of 20 Project: Taco Bell -Tukwila Prepared By: Performance Summary For 7.5T GasEle 03/23/2018 11:16AM A 85.8 84.3 80.5 78.7 76.4 72.7 68.3 65.1 89.6 Lw B 59.6 68.2 71.9 75.5 76.4 73.9 69.3 64.0 81.4 LwA C 53.4 51.9 48.1 46.3 44.0 40.3 35.9 32.7 57.2 Lp D 27.2 35.8 39.5 43.1 44.0 41.5 36.9 31.6 49.0 LpA Legend A Sound Power Levels at Unit's Acoustic Center, Lw B A -Weighted Sound Power Levels at Unit's Acoustic Center, LwA C Sound Pressure Levels at Specific Distance from Unit, Lp D A -Weighted Sound Pressure Levels at Specific Distance from Unit, LpA Calculation methods used in this program are patterned after the ASHRAE Guide; other ASHRAE Publications and the AHRI Acoustical Standards. While a very significant effort has been made to insure the technical accuracy of this program, it is assumed that the user is knowledgeable in the art of system sound estimation and is aware of the tolerances involved in real world acoustical estimation. This program makes certain assumptions as to the dominant sound sources and sound paths which may not always be appropriate to the real system being estimated. Because of this, no assurances can be offered that this software will always generate an accurate sound prediction from user supplied input data. If in doubt about the estimation of expected sound levels in a space, an Acoustical Engineer or a person with sound prediction expertise should be consulted. 23 - 18T 16 40:RPM 04 _L FanCurve ,11c0 WM incanim r. 5.008HP -- 1 02 3.008HP 2.008HP m Ll- _i 1 I 1 : . I 1 ._ _I ! ___ -.! L x 4__L_!_1 ‘t•-.1... 1 !_ ... 1 [ ! 1 I.; CO 04 0B 12 16 23 24 28 32 36 4D 44 Airflow(CFM-thousands) RPM=792 BHP=1.80 MaximumRPM=1400 MaximumBHP=4.70 Note: Pleasecontactapplicationengineeringforselectionsoutsidetheshadedregion. SC -System Carve RP-RatedPoint Packaged Rooftop Builder 1.49f Page 9 of 20 Project: Taco Bell -Tukwila Prepared By: Unit Feature Sheet for 7.5T GasEle 03/23/2018 11:16AM Carrier reatherMakee 48TC PACKAGED ROOFTOP GAS HEATING/ELECTRIC COOLING UNITS 3, 4, 5. 6, 7.5. 8.5, 10, 12.5, 15 TONS OptIonai Lout trod awl Guard Shosn 115/Hilitt COMPLIAMT VIFEATHERMAKER SERIES wtathetma er units are on e -d ece gas heating. Meet= coogng units that are pre-or:red and charged with Puron (R -41G) refrigerant They are factory tested In both heatng and cooling modes and rated :n accordance with AHRk Standards 210f246 04-05 srzesi and 340f380 (07-16 eats). weatbermairer louts are designed nSOPOf Canoe volt1 UL Standard 1995. and risted by the Underwritafs" Laboratories Abordved end cartr6ed by: .0,45.ssary. Certified to 150 9001 STANDARD FEATURES INCLUDE; • P4ree (51-41dar HPC refrigarar4 • AgRRAE 90 I *rely woo": tr'rt • &oaf: compfeeamrs with ;Mem& btliik and ev'efid ad proteWon • Snoie-stagepeeng capacity =TOW 04-1 2 =dais * Tstage pacity Oartn".0 en 00-16 models • EEER's up to 11*, EEP,",* up I* 111 end s to I 6 • Ataftrwt atfvenfint naktsneg *Wein * ExCesive nowsoloossie ocospoot =ode -noel* pan in alpoionitnew with ASNRAE Stan -dote 02, slop desQn, side 07 oent*rdnvn • Standard soWng ape rat*n up to 115T (45, end down to 4 n*F - down te 215'==(4cte-tt Pte-Osolte6 extent pans* and diner-oitaited ritener parse s tested to SOO hews sal sway protenvan • Fa:7'y eisulsted esepurt seUi-stste eent-o, en-Wesid espinesdiesseW LED Einar code dews,,„ sop n Wonerpontoi logc enr.d energy.sevW2 indoor fan motel' dosy • Low NM weds* that meet (3.S",'wn It Air Oust*/ Management • ,a<iu.c*<1 dre1( e hest earP±2,4*:,em decor ▪ 4eciuncionig*s ..yamtsweta up to two Mopes Pt **shrill • Low pressure and high presswe swim* pr's -ca. MARITENANCE FEATURE& • Amass banalvrre. assygrt ,-eras • le,,,eye6,4**s, startlg, *ewes on iota *opus orwes * Twe-,ineh thspesse retow es Peva and TeWiwas Ma/ eeness dow • areot Drive ECM en ate 5 volegeenyeiresdels and Was drive evaporeiw-fan *tar and ou:S...1wbblneticine orsisele ori o',". snodeks • New tenxteO ipard rad2Pstng Safety wrout Woublesineatno and ***pjsiti onnW OOP bintind4Swenf * Eats 1GC watate on.o-olvd 444n.asirca*I.*: LED eefor wide dewnkvon, buinwporarni lows end energy wines mdeer ter, rtmtar defty. INSTALLATION FEATURE& * ilmt.ttre.etrktornfoowereiltrycisoeV•ly * Sell* pddmna e • p nmete- ease wtt*W4* Ivo tng seareem and foft aWri • -7-Wki nventee from le itW 1'C herizentOssfow for sista mounting. 05 Sze modet require field gnstsVed supp4 dew' tossT). STANDARD WARRANTY: • Idlearbaste=oarroret— 1 aleserstaehasesteerapton • 5 -ye ar cenwessw • 1-yesmarts • S-Fellf pads on Nevation Condenser eas -Vere ova ilaMe • Mei ny opilona, eoride s.15*,,Vlblf* OPTIONS INOLtIDE BUT ARE NOT LIMITED TO: • PerLer and RTU Open I£b-Preteca: Oonhoe • Stiogsly and Retow, As Smoke atteeters, /it* stem motws 4 LA aVi.11441 OtWiderat gidgetit• • EzenerSzet, econned end wonsen rite outeleotsant • Stor4ess Stott heat exchangef vistsln • Common fesistantowi costing • *tunsdi-S0AZePeductive dehuwNlifeaten systemave0abie ono,: models 4Vith frPF canrienseresits- Maim LbsWE oontrdasrawznided • 4n,god **Wilt p-1040-'5 • al Of Vora ZOWs§ *mime* Now reerarosrobseremiagfo SW Wit Packaged Rooftop Builder 1.49f Page 10 of 20 3/1/2019 City of Tukwila Department of Community Development JESSE SIMENSON PO BOX 29116 BELLINGHAM, WA 98228 RE: Permit No. M18-0052 TACO BELL 16350 W VALLEY HWY Dear Permit Holder: Allan Ekberg, Mayor Jack Pace, Director In reviewing our current records, the above noted permit has not received a final inspection by the City of Tukwila Building Division. Per the International Building Code, International Mechanical Code, Uniform Plumbing Code and/or the National Electric Code, every permit issued by the Building Division under the provisions of these codes shall expire by limitation and become null and void if the building or work authorized by such permit has not begun within 180 days from the issuance date of such permit, or if the building or work authorized by such permit is suspended or abandoned at any time after the work has begun for a period of 180 days. Your permit will expire on 4/20/2019. Based on the above, you are hereby advised to: 1) Call the City of Tukwila Inspection Request Line at 206-438-9350 to schedule for the next or final inspection. Each inspection creates a new 180 day period, provided the inspection shows progress. -or- 2) Submit a written request for permit extension to the Permit Center at least seven(7) days before it is due to expire. Address your extension request to the Building Official and state your reason(s) for the need to extend your permit. The Building Code does allow the Building Official to approve one extension of up to 180 days. If it is determined that your extension request is granted, you will be notified by mail. In the event you do not call for an inspection and/or receive an extension prior to 4/20/2019, your permit will become null and void and any further work on the project will require a new permit and associated fees. Thank you for your cooperation in this matter. Sincerely, Bill Rambo Permit Technician File No: M18-0052 6300 Southcenter Boulevard Suite #100 • Tukwila, Washington 98188 • Phone 206-431-3670 • Fax 206-431-3665 9/5/2018 City of Tukwila Department of Community Development JESSE SIMENSON PO BOX 29116 BELLINGHAM, WA 98228 RE: Permit Application No. M18-0052 TACO BELL 16350 W VALLEY HWY Dear JESSE SIMENSON, Allan Ekberg, Mayor Jack Pace, Director In reviewing our current application files, it appears that your permit applied for on 4/17/2018, has not been issued by the City of Tukwila Permit Center. Per the International Building Code, International Mechanical Code, Uniform Plumbing Code and/or National Electrical Code every permit application not issued within 180 days from the date of application shall expire and become null and void. Currently your application has a status of APPROVED and is due to expire on 10/17/2018. If you still plan to pursue your project, you are hereby advised to do one of the following: 1) If the plan review is complete for the project and your application is approved, you may pick up the application before the date of expiration. At the time of permit issuance the expiration date will automatically be extended 180 days. -or- 2) If the plan review is not completed submit a written request for application extension (7) seven days in advance of the expiration date. Address your extension request to the Building Official and state your reason(s) for the need to extend your application. The Building Code does allow the Building Official to approve one extension of up to 90 days. If it is determined that your extension request is granted, you will be notified by mail. In the event that we do not receive your written request for extension or request is denied, your permit application will expire and your project will require a new permit application, plans and specifications, and associated fees. Thank you for your cooperation in this matter. Sincerely, Bill Rambo Permit Technician File No: M18-0052 6300 Southcenter Boulevard Suite #100 • Tukwila Washington 98188 • Phone 206-431-3670 • Fax 206-431-3665 PERMIT COORD COPY PLAN REVIEW/ROUTING SLIP PERMIT NUMBER: M18-0052 DATE: 04/18/18 PROJECT NAME: TACO BELL SITE ADDRESS: 16350 W VALLEY HWY X Original Plan Submittal Response to Correction Letter # Revision # Revision # before Permit Issued after Permit Issued DEPARTMENTS: A kW� 114CH Building Division al Public Works PrM kA10 10% Fire Prevention Structural Planning Division ❑ Permit Coordinator El PRELINIINARY REVIEW: Not Applicable ❑ (no approval/review required) DATE: 04/19/18 Structural Review Required REVIEWER'S INITIALS: DATE: APPROVALS OR CORRECTIONS: DUE DATE: 05/17/18 Approved ❑ Approved with Conditions Corrections Required ❑ Denied (corrections entered in Reviews) (ie: Zoning Issues) Notation: REVIEWER'S INITIALS: DATE: Permit Center Use Only CORRECTION LETTER MAILED: Departments issued corrections: Bldg 0 Fire ❑ Ping 0 PW 0 Staff Initials: 12/18/2013 NORTHSOUND REFRIGERATION- I C Home F'ispahol Contact: Safety & Health Claims & Insurance Washington State Department of Labor & Industries Page 1 of 2 Search L&I A -Z Index Help My 1",&I Workplace Rights Trades & Licensing NORTHSOUND REFRIGERATION INC Owner or tradesperson Principals MILSTEAD, PAUL STUART, PRESIDENT Doing business as NORTHSOUND REFRIGERATION INC WA UBI No. 602 170 260 PO BOX 29116 BELLINGHAM, WA 98228 360-380-1381 WHATCOM County Business type Corporation License Verify the contractor's active registration / license / certification (depending on trade) and any past violations. Construction Contractor Active. ....................... _.._... _......_....._. . Meets current requirements. License specialties GENERAL License no. NORTHRI898CG Effective — expiration 02/07/2011— 02/07/2019 Bond CBIC Bond account no. SI8582 $12,000.00 Received by L&I Effective date 02/07/2011 02/03/2011 Expiration date Until Canceled Insurance ........_........... Berkley Insurance Co $2,000,000.00 Policy no. CPA602833622 Received by L&I Effective date 06/02/2017 06/09/2017 Expiration date 06/09/2018 Insurance history Savings No savings accounts during the previous 6 year period. Lawsuits against the bond or savings No lawsuits against the bond or savings accounts during the previous 6 year period. L&I Tax debts No L&I tax debts are recorded for this contractor license during the previous 6 year period, but some debts may be recorded by other agencies. License Violations No license violations during the previous 6 year period. Help us improve https://secure.lni.wa.gov/verify/Detail.aspx?UBI=602170260&LIC=NORTHRI898CG&SAW= 5/9/2018 NORTHSOUND REFRIGERATION INC Page 2 of 2 Workers' comp Do you know if the business has employees? If so, verify the business is up-to-date on workers' comp premiums. L&I Account ID Account is current. 028,398-00 ......................... Doing business as NORTHSOUND REFRIGERATION INC Estimated workers reported Quarter 1 of Year 2018 "21 to 30 Workers" L&I account contact T3 / STEPHANIE HENDERSON (360)902-5598 - Email: HSTE235@Ini.wa.gov Public Works Strikes and Debarments Verify the contractor is eligible to perform work on public works projects. Contractor Strikes No strikes have been issued against this contractor. Contractors not allowed to bid No debarments have been issued against this contractor. Workplace safety and health Check for any past safety and health violations found on jobsites this business was responsible for. Inspection results date 10/28/2016 Inspection no. 317942419 Location 2915 HARRISON AVE NW Olympia, WA 98502 Inspection results date 10/22/2013 Inspection no. 316874296 Location 19905 State Route 2 Monroe, WA 98272 Violations No violations Washington State Dept. of Labor & Industries. Use of this site is subject to the laws of the state of Washington. Help us improve https://secure.lni.wa.gov/verify/Detail.aspx?UBI=602170260&LIC=NORTHRI898CG&SAW= 5/9/2018