HomeMy WebLinkAboutPermit M19-0168 - ESSENDANT - ROOF MOUNTED HEAT PUMP REPLACEMENTESSENDANT
18351 CASCADE AVE S
M19-0168
Parcel No:
Address:
��^�xx °�� ^U
v�8~� x�n Tukwila
Department of Community Development
63O0SouthcenterBoulevard, Suite #1U0
Tukwila, Washington gQ1QQ
Phone: 206'431'3670
Inspection Request Line: Z06'438'9350
Web site: http-//www.TukwilaWA.Rov
7888900160
l8351CASCADE AVE S
Project Name: ESSENDANT
MECHANICAL PERMIT
Permit Number: K419'0168
Issue Date: 12/9/2019
Permit Expires On: 6/6/2020
Owner:
Name:
LIT KENTVALLEY
Address 1717M[K|NNEYAVSTE1900,
Contact Person:
Name:
Contractor:
License No:
Lender:
]ESIE[HUT|[H
]2O2[5TNE, AUBURN, WA, 9OOO2
COMFORT MECHANICAL INC
32DZ[5TNE, AUBURN, WA, 98UOZ
[OyWFDK4004DA
'''
Phone: (425)251-9840
Phone: (425)251-9840
Expiration Date: 3/18/2020
DESCRIPTION OF WORK:
REPLACE (1) 3-TON ROOF MOUNTED HEAT PUMP, LIKE FOR LIKE.
REPLACEMENT OF EXPIRED PERMIT M18-0147.
Valuation ufWork: $5,827I0
Type ofWork: REPLACEMENT
Fuel type: ELECT
Fees Collected: g285.78
Electrical Service Provided by: PUGETSOUND ENERGY
Water District: TUKVV|U\
Sewer District: TUKVV|LA
Current Codes adopted by the City of Tukwila:
International Building Code Edition:
International Residential Code Edition:
International Mechanical Code Edition:
Uniform Plumbing Code Edition:
as Code:
Permit Center Authorized Signature:
National Electrical Code:
VVACities Electrical Code:
VVA[296-46g:
WA State Energy Code:
OS 21
05 21
2017
2017
2017
2015
I hearby certify that I have read and examined this permit and know the same to be true and correct, All
provisions of law and ordinances governing this work will be complied with, whether specified herein or not.
The granting of this permit does not presume to give authority to violate or cancel the provisions of any other
state nrlocal laws regulating construction orthe performance ofwork. |amauthorized tosign and obtain this
development permit and agree tothe conditions attached tothis permit.
Signature:
Print Name:
_/'��
r,»
Date: / `VV
This permit shall become null and void if the work is not commenced within 180 days for the date of issuance, or if
the work issuspended orabandoned for aperiod of18Odays from the last inspection.
PERMIT CONDITIONS:
l: Work shall be installed in accordance with the approved construction documents, and any changes made
during construction that are not in accordance with the approved construction documents shall be
resubmitted for approval.
2: All permits, inspection record card and approved construction documents shall be kept at the site of work
and shall be open to inspection by the Building Inspector until final inspection approval is granted.
3: Readily acce'sdb|eaccess turoof mounted equipment brequired.
4: All construction shall be done in conformance with the Washington State Building Code and the
Washington State Energy Code.
S: Remove all demolition rubble and loose miscellaneous material from lot or parcel of ground, properly cap
the sanitary sewer connections, and properly fill or otherwise protect all basements, cellars, septic tanks,
wells, and other excavations. Final inspection approval will be determined by the building inspector based
on satisfactory completion of this requirement.
6: All plumbing and gas piping work shall be inspected and approved under a separate permit issued by the
City nfTukwila Building Department (2O64]1'367U).
7: All electrical work shall be inspected and approved under a separate permit issued by the City of Tukwila
Permit Center.
8: VALIDITY OFPERMIT: The issuance nrgranting ofapermit shall not beconstrued tobeapermit for, oron
approval of, any violation of any of the provisions of the building code or of any other ordinances of the City
of Tukwila. Permits presuming to give authority to violate or cancel the provisions of the code or other
ordinances ofthe City ofTukwila shall not bevalid, The issuance ofapermit based onconstruction
documents and other data shall not prevent the Building Official from requiring the correction of errors in
the construction documents and other data.
9: `MECHANICAL PERMIT [OND[OONS*^~
10: All mechanical work shall be inspected and approved under a separate permit issued by the City of Tukwila
Permit Center (Z06/43l'3670.
11: Manufacturers installation instructions shall be available on the job site at the time of inspection.
PERMIT INSPECTIONS REQUIRED
Permit Inspection Line: (2V6)438-935u
0703 [NE[HEQUIP EFF
I800 MECHANICAL FINAL
0609 P|PE/DU[T|NSUL4T0N
0705 REFRIGERATION EQUIP
0701 KOUGH'|Nx4ECM4N|C4L
CITY OF TUK
Community Development Department
Permit Center
6300 Southcenter Blvd., Suite 100
Tukwila, WA 98188
http://www.TulcwilaWA.gov
Mechanical Permit No. Xi q-oRee
Project No.
Date Application Accepted:
Date Application Expires:
(For office use on
MECHANICAL PERMIT APPLICATION
Applications and plans must be complete in order to be accepted for plan review.
Applications will not be accepted through the mail or by fax.
**please print**
SITE LOCATION
Site Address: l 13S1 Cinscpide. Ave. .5
Tenant Name: g S Sex/1100'4
PROPERTY OWNER
Name: LI 7—
i(rti. VAlley
Address: 17 ( -,
t
A _ ._
lig oc tli ii ey aye
City: b I t
i 1 61.5
State: Tx
Zip: 7g-z 02
CONTACT PERSON — person receiving all project
communication
e Name. Ch 4 .C11
Address: s ckale_ 0.5 covrirot.c--ior
City: State: Zip:
Phone: Fax:
Email: t eSS eg,CpWri;rh4-teel)-c-.90c,
0
King Co Assessor's Tax No.: 7Sigctoo 160
Suite Number: Floor:
New Tenart: ...-Yes 62"_No
MECHANICAL CONTRACTOR INFORMATION
Company Name6:0114-0,4 i-co, I
Address: Zz oz c s/,. NF
Cit'AL-42,-,rvt State:1,4 Zi13:a...,
-1WOOZ
Phone: Zs- Zs iSY0Fax:
Contr Reg No. 'cop ivireyr , Date:c,./AVzo
Tukwila Business License No.:aci ectv.?6 S-
Valuation of project (contractor's bid price): $
Describe the scope of work in detail:
Re,P1C4C CO 3 -4641 rit9deF 0010{A.Orytpl r
Use:
Residential: New ......
Commercial: • • New
Fuel Type: Electric ....
Replacement ____ D
Replacement
c. 'For
Gas Other:
FiMpplicationsTorms.Applications On Line \ 2016 Applications \Mechanical Permit Application Revised 1 -4-16.docx
Revised-, January 2016
bh
Page 1 of 2
Indicate type of mechanical work being installed and the quantity below:
Unit Type
Qty
Furnace <100k btu
I,
Furnace >100k btu
Floor furnace
Suspended/walUfloor
mounted heater
Appliance vent
Repair or addition to
heat/refrig/cooling
system
Air handling unit
<10,000 cfm
Unit Type
Qty
Air handling unit
>10,000 cfm
Evaporator cooler
Ventilation fan
connected to single duct
Ventilation system
Hood and duct
Incinerator — domestic
Incinerator —
comrn/industrial
Unit Type
Qty
Fire damper
Diffuser
Thermostat
Wood/gas stove
Emergency generator
Other mechanical
equipment
Boiler/Compressor
Qty
0-3 hp/100,000 btu
3-15 hp/500,000 btu
15-30 hp/1,000,000 btu
30-50 hp/1,750,000 btu
50+ hp/1,750,000 btu
Noise: •. •
Mechanical units need to be in compliance with the Tukwila Noise Code. Maximum permissible sound levels are based on from where the sound is
created and where the sound is heard. Additionally, if sound can be heard from within a house at night in a residetitfal zone if may not be allowed.
For more details, see TMC 8.22
District of Sound
Producing Source
District of Receiving Property
Residential, Daytime*
Residential, Nighttime
Commercial
Industrial
Residential
55 dB(A)
45 dB(A)
57 dB(A)
60 dB(A)
' Conimercial
57 dB(A)
47 dB(A)
60 dB(A)
65 dB(A)
Industrial
60 dB(A)
50 dB(A)
65 dB(A)
70 dB(A)
*Daytime means 7AM-10PM, Monday through Friday and 8AM-10PM, Saturday, Sunday and State -recognized holidays. '
A few sounds are exempt from the noise code, including;
• Warning devices;
Construction and property maintenance during the daytime hours (7am-1Opm);
• Testing of backup generators during the day.
PERMIT APPLICATION NOTES -
Value of construction — in all cases, a value of construction amount should be entered by the applicant. This figure will be reviewed and is subject
to possible revision by the permit ce-nter to comply with current fee schedules. •
Expiration of plan review — applications for which no permit is issued within 180 days following the date of application shall expire by limitation.
The building official may grant one extension of time for additional periods not to exceed 90 days each. The extension shall be requested in writing
and justifiable cause demonstrated. Section 105.3.2 International Building Code (current edition).
I HEREBY CERTIFY THAT I HAVE READ AND EXAMINED THIS APPLICATION AND KNOW THE SAME TO BE TRUE UNDER
PENALTY OF PERJURY BY THE LAWS OF THE STATE OF WASHINGTON, AND I AM AUTHORIZED TO APPLY FOR THIS PERMIT.
BUILDINGS7,9R UTHORIZED AGENT:
Signature:
Print Narne: "S
Mailing Address: Z20z_ Al F
Date: 10/
Day Telephone: ZC Z
k/14
City
State
(q
clgq0
"(goo 2
Zip
HAApplicationsTorms-Applications On Line \ 2016 Applications \Mechanical Permit Application Revised -4-16idocx
Revised: January 2016
Page 2 of 2
DESCRIPTIONS
PermitTRAK
Cash Register Receipt
City of Tukwila
I ACCOUNT
0
QUANTITY I PAID
$285.78
$285.78
Credit Card Fee
$8.32
Credit Card Fee
R000.369.908.00.00
0.00
$8.32
MECHANICAL
$266.79
PERMIT ISSUANCE BASE FEE
R000.322.100.00.00
0.00
$33.15
PERMIT FEE
R000.322.100.00.00
0.00
$180.28
PLAN CHECK FEE
R000.322.102.00.00
0.00
$53.36
TECHNOLOGY FEE
$10.67
TECHNOLOGY FEE
R000.322.900.04.00
0.00
$10.67
TOTAL FEES PAID BY RECEIPT: R18743
$285.78
Date Paid: Thursday, October 03, 2019
Paid By: JESSE CHUTICH
Pay Method: CREDIT CARD 613032
Printed: Thursday, October 03, 2019 2:24 PM 1 of 1
CirliWYSTEMS
CO TUKWILA ETK4KIT
6288 S0UTH[[NTEx BLvo
TUKWILA' WA 98188
206'433'1870
CITY OF TVNWIL4
0017340808882374404500
Date: 18/03/2019 02;23'38 PM
CREDIT Cxno SALE
VISA
CARD NUMBER: **********7666 K
TRAN AMOUNT: $285.78
APPROVAL [D: 613032
RECORD #: 800
CLERK ID: kandace
K
{CARDHOLDER'S SIGNATUREJ
I AGREE TO PAY THE ABOVE TOTAL AMOUNT
ACCORDING TO THE CARD ISSUER AGREEMENT
(MERCHANT AGREEMENT IF CREDIT VOUCHER)
Thank you!
Merchant Copy
INSPECTION RECORD
Retain a copy with permit
INSPECTION NO. PERMIT NO.
CITY OF TUKWILA BUILDING DIVISION
6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431-3670
Permit Inspection Request Line (206) 438-9350
Project:
C.,5",erv.49i T`
Type of Inspection:
R6/ /4/ MfC/SS/
' �-
Address:
/ 9 397' Ci5C4/46"
Date Called:
Special Instructions:
*
i3ate'ianted:
p.m.
Reque>ter:
Phone No:
5-3 ' 577—X1:,/
Approved per applicable codes.
C * MMENTS
Corrections required prior to approval.
nspe 0
Date:
REINSPECTION FEE REQUIRED. Prior to next inspection. fee must be
paid at 6300 Southcenter Blvd.. Suite 100. Call to schedule reinspection.
INSPECTION RECORD
Retain a copy with permit
INSPECTION NO. PERMIT NO.
CITY OF TUKWILA BUILDING DIVISION
6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431-3670
Permit Inspection Request line (206) 438-9350
M 19-0140
Project: ._ TT
Type of Inspection:
Address:
4 357 C Df ��
j�+
Y,j
Date Called:
Special Instructions:
Date Wanted:
-----17
a.m.
p-in.‘
Requester:
Phone N 2-‘)(0 — 9 o 3^35%9
Approved per applicable codes.
Corrections required prior to approval.
.COMMENTS:
n s pecto
Date:
REINSPECTION FEE REQUIRED. Prior to next inspection. fee must be
paid at 6300 Southcenter Blvd., Suite 100. Call to schedule reinspectaon.
INSPECTION RECORD
Retain a copy with permit
INSPECTION NO. PERMIT Na
CITY OF TUKWILA BUILDING DIVISION
6300 Southcenter Blvd., #100, Tukwila. WA 98188 (206) 431-3670
Permit Inspection Request Line (206) 438-9350
Pro'ect:
�
Type of Inspection:
eC...1•1.✓1; C.
-
fi IV* L-- ,
Address:
I S 3 5 Cs .
Ave. 3.
Date Called:
Special Instructions: CO
4CR'.-per,..'- C
RA7lYs
rn lCheit t "
1 '
-Date Wanted:
I P - to Z
t9
a.m.
p.m.
Requester:
551
T6.Ai
Phone No:
QApproved per applicable codes.
COMMENTS:
pecto
Corrections required prior to approval.
REINSPECTION FEE REQUIRED. Prior to next inspection. f+ a must be
paid at 6300 Southcenter Blvd., Suite 100. Call to schedule reinspection.
CODE
FOR
CODE COMPLIANCE
APPROVED
X-3 OCT o 9 20194Yv
City of Tukwila
BUILDING DIVISION
RECEIVED
cm, GP TUKWILA
OCT 0 3 2019
CENTER
9 c.,,\
ORA L
1ONA;:v
**trial
1-11
STRUCTURAL
CALCULATIONS
Essendant RTU
18351 Cascade Avenue
Tukwila, Washington
NOVEMBER 12, 2018
PREPARED FOR:
Comfort Mechanical
3202 C Street NE
Auburn, Washington 98002
FILE
PREPARED BY:
Moore Engineering Group
21902 96th Avenue SE
Snohomish, Washington
Moore
Engineering
Group
GENERAL STRUCTURAL NOTES:
1. ALL MATERIALS, WORKMANSHIP, DESIGN, AND CONSTRUCTION SHALL CONFORM TO
THESE NOTES AND THE INTERNATIONAL BUILDING CODE (IBC), 2015 EDITION.
2. DESIGN LOADING CRITERIA:
ROOF LIVE LOAD 25 PSF
MECHANICAL UNIT 482 POUNDS
EARTHQUAKE SDS = 0.900
SITE CLASS D to E
WIND 110 MPH, EXPOSURE B
3. STRUCTURAL CALCULATIONS AND SKETCHES SHALL BE USED IN CONJUNCTION
WITH MECHANICAL DRAWINGS FOR BIDDING AND CONSTRUCTION. CONTRACTOR
SHALL VERIFY DIMENSIONS AND CONDITIONS FOR COMPATIBILITY AND SHALL
NOTIFY ENGINEER OF ALL DISCREPANCIES PRIOR TO CONSTRUCTION.
4. CONTRACTOR SHALL VERIFY ALL EXISTING DIMENSIONS, MEMBER SIZES AND
CONDITIONS PRIOR TO COMMENCING ANY WORK. ALL DIMENSIONS OF EXISTING
CONSTRUCTION SHOWN ARE INTENDED AS GUIDELINES ONLY AND MUST BE
VERIFIED. THE EXISTING CONDITIONS SHOWN ON THE SKETCHES ARE BASED
EITHER ON Slit OBSERVATION, ORIGINAL DRAWINGS OR WERE ASSUMED BASED ON
EXPECTED CONDITIONS. IF THE EXISTING CONDITIONS DO NOT CLOSELY MATCH
THE CONDITIONS SHOWN ON THE SKETCHES, OR IF THE EXISTING MATERIALS ARE
OF QUESTIONABLE OR SUBSTANDARD QUALITY, NOTIFY THE ENGINEER PRIOR TO
COMMENCING ANY WORK.
5. CONTRACTOR SHALL PROVIDE TEMPORARY BRACING FOR THE STRUCTURE AND
STRUCTURAL COMPONENTS UNTIL ALL FINAL CONNECTIONS HAVE BEEN
COMPLETED IN ACCORDANCE WITH THE DRAWINGS.
6. CONTRACTOR SHALL BE RESPONSIBLE FOR ALL SAFETY PRECAUTIONS AND THE
METHODS, TECHNIQUES, SEQUENCES OR PROCEDURES REQUIRED FOR THE
COMPLETION OF THE WORK.
7. FRAMING LUMBER SHALL BE KILN DRIED OR MC-19, AND GRADED AND MARKED IN
CONFORMANCE WITH W.C.L.B. STANDARD GRADING RULES FOR WEST COAST
LUMBER NO. 17. FURNISH TO THE FOLLOWING MINIMUM STANDARDS:
JOISTS: (2x MEMBERS)
HEM -FIR NO. 2 Fb = 850 PSI, Fv = 150 PSI
8. TIMBER CONNECTORS CALLED OUT BY LETTERS AND NUMBERS SHALL BE "STRONG -
TIE" BY SIMPSON COMPANY, AS SPECIFIED IN THEIR CATALOG NO. C-C-2017. INSTALL
NUMBER AND SIZE OF FAS 1ENERS AS SPECIFIED BY MANUFACTURER. CONNECTORS
SHALL BE INSTALLED IN ACCORDANCE WITH THE MANUFACTURER'S INSTRUCTIONS.
9. SHEET METAL SCREWS SHALL CONFORM TO THE AMERICAN IRON AND STEEL
INSTITU 1'E (AISI) "SPECIFICATIONS FOR THE DESIGN OF COLD -FORMED STEEL
STRUCTURAL MEMBERS".
10. WOOD SCREWS SHALL CONFORM TO ANSI/ASME STANDARD B18.6.1.
11. METAL STRAPS FOR ANCHORAGE OF MECHANICAL UNITS SHALL CONFORM TO ASTM
A446 GRADE A WITH A MINIMUM YIELD STRESS OF 33 KIPS PER SQUARE INCH.
12. NAILS UTILIZED SHALL HAVE THE FOLLOWING MINIMUM PROPERTIES:
NAIL 8d
SHANK DIAMETER 0.1.31"
HEAD DIAMETER 0.281"
MINIMUM LENGTH 2-1/2"
l0d 16d
0.148' 0.148"
0.312" 0.344"
3" 3-1/4"
13. PROVIDE 2x8 SUB-PURLINS AND HANGERS AS SHOWN ON THE ATTACHED PARTIAL
ROOF FRAMING PLAN.
14. CONNECT THE UNIT TO THE EXISTING WOOD SLEEPERS WITH FOUR (4) 18 GAGE x 2-
1/2" WIDE GALVANIZED METAL STRAPS WITH THREE (3) #12 x 2" LONG GALVANIZED
WOOD SCREWS TO THE SLEEPERS AND THREE (3) #12 SHEET METAL SCREWS TO THE
UNIT AT EACH STRAP.
Moore
Engineering
Group
PROJECT:
ENG R: fLif
DATE: 17_/1 5,
SCALE:
I SHEET
PROJECT DESCRIPTION: The project consists of the replacement of an existing rooftop
mechanical unit.
LOADS: LIVE
DEAD
DEAD + LIVE
WIND
SEISMIC
EQUIPMENT
Unit
Ex. Sleeper
Total
Dimensions
Roofing and re -roof
1/2" plywood sheathing
2x4 @ 24" on -center
4x16 @ 8' on -center
Insulation
MEP
Ceiling & Lights
Total Dead
110 mph, Exposure B
Latitude
Longitude
Site Class
Sos (D) =
SDS (E) =
SDS
Existing RTU-1
280
95
375 pounds
4.0
1.5
0.7
1.8
1.0
2.0
2.0
13
25 PSF
38 PSF
47.437
-122.25
D to E WA DNR
0.947
0.852
0.900
New RTU-1
387
95
482 pounds
48"x45"x53" high
Moore
Engineering
Group
PROJECT:
ESSENDANT RTU
ENGR: KWM
DATE: 1 / 2/ I 8
SCALE:
47
SHEET
11/10/2018
riusGs Design Maps Summary Report
User -Specified Input
Design Maps Summary Report
Report Title Essendant RTU
Sat November 10, 2018 17:15:02 UTC
Building Code Reference Document 2012/2015 International Building Code
(which utilizes USGS hazard data available in 2008)
Site Coordinates 47.437°N, 122.25°W
Site Soil Classification Site Class D - "Stiff Soil"
Risk Category I/II/III
USGS-Provided Output
Ss = 1.421 g
S, = 0.530 g
SMS = 1.421 g
S„ = 0.795 g
So, = 0.947 g
S„ = 0.530 g
For information on how the SS and Si values above have been calculated from probabilistic (risk -targeted) and
deterministic ground motions In the direction of maximum horizontal response, please return to the application and
select the "2009 NEHRP" building code reference document.
AICER Response Spectrum
flto ,02. to) 1.x.,
Period, T (mei
1.40
11.9
)0)
Design Response Spectrum
)"4 411 0/0 I
Perksl, T (we)
1.04
1 An
tw.
Although this information is a product of the U.S. Geological Survey, we provide no warranty, expressed or implied, as to the
accuracy of the data contained therein. This tool is not a substitute for technical subject -matter knowledge.
https://prod01-earthquake.crusgs.govidesignmaps/us/summary.php?template=minimal&latitude=47.4378dongitude=-122.25&siteclass=38,riskcategory... 1/1
11/10/2018
Design Maps Summary Report
irt usGs Design Maps Summary Report
User -Specified Input
Report Title Essendant RTU
Sat November 10, 2018 17:15:26 UTC
Building Code Reference Document 2012/2015 International Building Code
(which utilizes USGS hazard data available in 2008)
Site Coordinates 47.437°N, 122.25°W
Site Soil Classification Site Class E - "Soft Clay Soil"
Risk Category 1/11/111
USGS-Provided Output
Ss = 1.421 g
S, = 0.530 g
SMS = 1.278 g
Smi = 1.271 g
Sps = 0.852 g
= 0.848 g
For information on how the SS and S1 values above have been calculated from probabilistic (risk -targeted) and
deterministic ground motions in the direction of maximum horizontal response, please return to the application and
select the "2009 NEHRP" building code reference document.
0 10
NICER Response Spectrum
tA, al O)) 2.3 l. 1:40
Period, T (sre)
cit
re,
Design Response Spectrum
11111fil
t 1.11) I tin 1.91
Period, T (scc)
10,3
Although this information is a product of the U.S. Geological Survey, we provide no warranty, expressed or implied, as to the
accuracy of the data contained therein. This tool is not a substitute for technical subject -matter knowledge.
https://prod01-earthquake.cr.usgs.govidesignmaps/us/summary.php?template=minimal&latitude=47.4378,1ongitude=-122.25&siteclass=48diskcategory... 1/1
. t
SPACER PANEL
WCC042F AND
WCCO6OF ONLY
CORNER POST
WCC042 AND
060F ONLY
CONDENSOR COIL
WCCD42f AND
WCCD6OF ONLY
DIMENSIONAL DATA
WCCO98.060F OUTLINE — REAR
{ALL 00MEN810748 ARE IN INCHES)
HORIZONTAL
SUPPLY
OPENING
DOWNFL'
SUPPLY
OPENING
SECT. X--X
HORIZONTAL
RETURN
OPENING
APPEARANCE SURFACE
OF SUPPLY & RETURN
PANEL
TYPICAL CROSS SECTION
OF HORIZONTAL SUPPLY &
RETURN PERIMETER FLANGES
OPEN)
Ld4
DIMENSIONAL
SURFACE ISE(
TAM)
EVAPORATOR COIL
& HLOWER PANEL
CONDENSATE DRAIN
FOR 3/4" FEMALE NPT
ECONQ),IZER/FILTER
ACCESS PANEL
RETURN
SECT. Y-Y
TYPICAL.CROSS SECTION
OF DOWNFLOW SUPPLY &
RETURN PERIMETER FLANGES
M(IfiEi
CODS WEIGHT6881
maw
manW1
A
8
C C
0
E
F
6
H
J
•
K
L
51
H
P
W2
W3man
mm
86
55
72
87
284
55.1/4
38
254/16
18.9/18
11.1/18
8-9115
8.13118
17
204/2
26
17.1/2
10
3
4.7/18
WCCO24F
WC0330F
77
65
88
105
•336•'
55.114
38
29.3/16
18.9/18
11.1/16
8.9/18
8.13116
17
20.13/16
265/i8
17.1/2
10
1.4CC036F
97
76
85
108
366
19
243/16
44C03425
94
73
80
104
351
184308
24
WC0348F
126
104
127
163
511
46
33-3/8
21-1/16
15-1/16
4-15/18
9.1/8
21-15/16
243/1
20
14
3
3.3/4
WCC060F
131
109
132
158, 829
64.5/18
24-3%4
28
From D wg. 2111729988 Rev. 4
dwg. no. 21X729085 P02
a
Packaged Rooftop Builder 1.49i
Certified Drawing for 3T Pkg HP
Project United Stationers
Prepared By:
0711712018
09:53AM
LEFT SI NEW
IffhI'I
llffiffiinl
FRAT VD
an
wink
f1w,'1f=
PIT 01.
gmpolar no
(gneft my 1M
t0
f0
r
1
100[•UI•••t}1011k
1131711.1.4, 14R11.1'a, 0111
311
11141014
1231 .13.10
Sip
II•IIL
11f
11.111
111_
101r14?-031110
7a )a•P4, 3444 f 11 p1110
93
111.0
•111
Illl
10•li2
51!
1i•I1L
NS
11.310
11¢
741.011•••1S/S104
4 41444•4, I417144.4, RSMI
14
111.0
41.314
1311
10.112
421
i1411
NS
111N)
141
411-4931112
11 E.4, 710143•1.11. 42l0
917
111.0
41.311
1110
11.11Z
321
11.111
id
_ 11
_ 131
art
ralt4E
Ra1E1 f(
1011g0
3�t
/1130140
f1.1 1 1 .1
3f.t
II.f 11.113s
14, 144.)4,�
1irut 1
I(,11,S
4,1
R,f
1Si,111,i
IILS 11.1
(t
- tuns
53.f }1y01 1
11,t
4
3149,14
.� 4ll.p •31
41,1
N
t444011
00.1 Al 11.1
41,7
lGl
2.34' 14.31111, 1.0.
10R0 40Ri
rnll-
111.31
13111-+
122.21
ICUS WWI 10 MOG N Nll.
i0103f Ik11
1016 a... ...,,. ......11 1331.4
act R010111.Odf ....... .:.......:::::::.::.:::........ ...... 2 100.11
tin aW0f100 23000...... ......................:.......0 p17 a
0011010r1111..................................... .......0 t0.�1
agin0LL 2N4.................. ................. ..f1 IH1,a
BIM 004111
1101f 147
yRTfF1�OR . Pa�OflMi0gqr�51 .[[t1}.�11.11...,.:;.::.;li 1111:01
Un 40 0 0W'(r0 0+11f OIa.0h01
01f01010u1f40323110102R ......................t211a1.11
1261/la IR Min AC MU
POO
folk 41b f20E.........................................0 [Inl.11
2�11100 1001u n13334 V131 u t111.2f
4Ct Nf0S1rt autlsa 21f 2.31
1111atr 01$111Cff4111Ir It?Left 11St 101 12 GN.13 0AI1113
Rtlnl113 fgRi FEMME 10100 t01/g11310,
011USIJ310llutD1
iuiiiiiHiiiiiiiru
FICK SCE NU
4,11
11 t1S1.01
50VT5C0411
Page 5 of 13
Performance Summary For 3T Pkg HP
Project: United Stationers
Prepared By:
07/17/2018
09:53AM
Part Number:5OVT-C36---5
ARI SEER'
14.00
Base Unit Dimensions
Unit Length.____._._., _._. 48.3 in
UnitWidth:___................._...._.__._...__...._._...._.----.__._..ff......._........_._:___..._..___..,.._.______,....44.2 in
UnitHeight:_._.._..____,,,.,..,,,.._..__._,_.__....................__...,,..- ,,,..........._..____._.,...,......_..._.__.,__.,,........,.__.,___.._48.8 in
Total Operating Weight_.__............._....,_.._.____.___,,......._____...___.._.._..,....-----.__ 387 lb
Unit
Unit Voltage -Phase -Hertz' ______.,._w 208-3-60
Air Discharge:_ ............._.._...._.__.,_._ ___ _.,_. Horizontal
Fan Drive Type:._ .._.____..... -. __.__.,.,_..,,,.,.Direct
Actual Airflow:___._ .................... __.__.._.._.........._..___._....__..____.__.... .1156 CFM
Site Altitude .,..._..__.___ ____ __,..____ _._ _ __..___._..._,__....._._ 0 ft
Cooling Performance
Condenser Entering Air DB:95.0 F
Evaporator Entering Air DB:__.,._ _,_.,_,.,.._ .,,,,...___ _ ._....,. ,...,.,.,,.____._.,_.., ,..,,,._ _.__._,._.. _..,.. _80.0 F
Evaporator Entering Air WB67.0 F
Entering Air Enthalpy;,__ ___..__._._....,_. ____....,.. _._,.,_. __.......,..,_,.31.44 BTU/lb
Evaporator Leaving Air DB' ___,......,._,__..-..__.._................._._.,_._.,.._,...,. _,_..59.5 F
Evaporator Leaving Air WB__.................._.____._....._...... ,..._._.____.._ _....,__,._.. 67.8 F
Evaporator Leaving Air Enthalpy:._,...,.,...._.___..,...._....,..,...._...,._._.__...............___..._..___.,._.._.......--__.._._,24.90 BTU/lb
Net Cooling Capacity. _ ,, __........._,.,,_„_.___,._,,,,,,,,,,,,,,,, ,,,___.____..._..,.,,,._,34.00 MBH
Net Sensible Capacity25.54 MBH
Total Unit Power Input: __2.96 kW
CoilBypass Factor.,.._._.__._..,.,_....._,,.__..,___,..........._...,.___.._..,_.._....,..,.,_..__.___....,,. 0.047
Heating Performance
Outdoor Ambient Temperature:_._.....,....._...____..__......._.,,_...__,_._._-_„_.....__.__.__.,_..............._,_,_,._...47.0 F
Entering Air Indoor Coil DB:.........._......-•--_-_.__............_. ____._ __ _.__................_ ___._ 70.0 F
Leaving Air Indoor Coll DB:. _. _.. ............... __._..........,....,_ __ _,......._..,....._ .._.-.._ .,__............... ,-.___.._97.5 F
Total Heating Capacity_-.___,,.,,_....,,...,_._.____.................__..,_.._ _,.,_.- _.34.31 MBH
Integrated Heating Capacity:__ _____.__ ..__,,..____.____..,......_....._._ __..__„_._.._.__.___ _-_34.31 MBH
Heating Power Input:___.._..._..,..___._..-..................__.____,....._.........__._. _._.,. _.....,._..2.78 kW
Electric Heating Capacity:. _,...... ,....,,. _ ____,_....,,_....._.-. _.__ .............__._._,. ,,_,. ,... ,_._.,_._._ _. , 7.50 kW
Unit Leaving Air Temp:_ ..............__._.._.................._...._._._._. 118.0 F
Supply Fan
External Static Pressure. 0.55 in wg
Options / Accessories Static Pressure
ElectricHeaters:......._.__..__.._...,... ,..-,._._._._..,_............._.._..___......_.,.........,._..._.,,..__,,. ,......,...,,.. ,.__._- 0.09 in wg
Economizer:.._....___._._._.0.11 in wg
WetCoil" ..............._ _.._.....,..., _. _.._._.__.... ,.__..,_____......._,...,_. _._._..__. .-.0.09 In wg
Total Application Static (ESP + Unit OptslAcc.) ..._._.,,..._.......,....__.__._._..._,......... ___ _..__0.84 In wg
FanMotor Size, hp•_.__--._ __.__.__._...._..____---_........_..____..-----.. _..............._.___,._ 3/4
NOTE__ Motor Speed, Horz
Electrical Data
MinimumVoltage:......._.. ,._._..., .,.._.._.,,._....,___.__ ._.....,...._..____._.._,.,,....._...,..,...__ __, 197
Maximum Voltage_253
Compressor RLA:._._____._ ____..._.......___.____._.............._.._,.____..,,._._..... 10.4
CompressorLRA _ _, ._,,...,..,.. _ __.,__.... .........._,- .._ ... ,,..,.._,....__._ __.._ _ .,,....._....,..,_.___,-73
Actual Electric Heater kW .7.5
ElectricHeater FLA'____.._._..............._...___..._........._....., .___ ----,-_._......._ ,.____._.20.8
OutdoorFan FLA (ea):.._._..................__.,__..._,...,.-,............______._..._.....,_..______._.,.,,,:.,....____.._..._....__..._1
Indoor Fan Motor FLA:6
PowerSupply MCA:---__ ................._.__._._..___....---_..__......__..__.___.,...__..._..__._.---_,.,........._...44.2
Packaged Rooftop Builder 1.491 Page 6 of 13
Moore
Engineering
Group
'77/
010/9s-,
f -
g74-6
ENGR: Ktfriy(
DATE:
SCALE:
11/
SHEET
Moore
Engineering
Group
PROJECT:
ENGR:
DATE: 1!
SCALE'
101•11110
4'ER", COORD POPY
PLAN REVIEW/ROUTING SLIP
PERMIT NUMBER: MI9-0168
PROJECT NAME: ESSENDANT
SITE ADDRESS: 18351 CASCADE AVE S
X Original Plan Submittal
DATE: 10/03/2019
Revision #
Revision #
before Permit Issued
after Permit Issued
DEPARTMENTS:
11/43 At& ka( 101 (
Building Division Fire Pre ention
Public Works
Structural
LI
Planning Division
Permit Coordinator 1110
PRELIMINARY REVIEW:
Not Applicable
(no approval/review required)
DATE: 10/08/19
Structural Review Required
REVIEWER'S TIALS: DATE:
APPROVALS OR CORRECTIONS:
Approved
Corrections Required
DUE DATE: 11/04/2019
Approved with Conditions E
Denied
(corrections entered in Reviews) (le: Zoning Issues)
n
Notation:
REVIEWER'S INITIALS: DATE:
Permit Center Use Only
CORRECTION LETTER MAILED:
Departments issued corrections: Bldg El Fire 0 Ping 0 PW Ej Staff Initials:
12/18/2013
COMFORT MECHANICAL INC
Home Espanol Contact
Search L&I
Page 1 of 2
SEARCH •
Safety & Health Claims & Insurance
0 Washington State Department of
Labor & Industries
A-Z Index Help My thl
Workplace Rights Trades & Licensing
COMFORT MECHANICAL INC
Owner or tradesperson
Principals
JACKSON, SHIRLEY A, PRESIDENT
JACKSON, HERB J, VICE PRESIDENT
Doing business as
COMFORT MECHANICAL INC
WA UBI No.
601 954 041
3202 C ST NE
AUBURN, WA 98002
425-251-9840
KING County
Business type
Corporation
Governing persons
HERB
J
JACKSON
SHIRLEY A JACKSON;
License
Verify the contractor's active registration / license / certification (depending on trade) and any past violations.
Construction Contractor Active
Meets current requirements.
License specialties
HeatingNent/Air-Conditioning and Refrig
(HVAC/R)
License no.
COMFOM1015LA
Effective — expiration
06/01/1999— 04/25/2020
Bond
Lexon Ins Co
Bond account no.
9815017
$6,000,00
Received by L&I Effective date
06/04/2012 06/01/2012
Expiration date
Until Canceled
Insurance
Federated Mutual Ins Co $1,000,000.00
Policy no.
9828233
Received by L&I Effective date
06/05/2019 06/01/2019
Expiration date
06/01/2020
Insurance history
Savings
Help us improve
TDT-4/11 (IC A(141 PA- T /TLYIllifTfll GT A 14Q A III— 1 CI /C1 /1111 CI
PROJECT DESCRIPTION:
1. REPLACE (1) 3-TON ROOF MOUNTED PACKAGED HEAT
PUMP WITH NEW 3-TON ROOF MOUNTED PACKAGED
HEAT PUMP WITH ECONOMIZER AND NECESSARY DUCT
TRANSITIONS TO CONNECT TO EXISTING.
GENERAL NOTES:
1. ECONOMIZER TO PROVIDE 100% OUTSIDE AIR WITH
PARTIAL COOLING AND MULTIPLE COOLING STAGES.
2. UNIT TO SIT ON EXISTING 4X12 ROOFED IN SLEEPERS.
1THERMOSTATTO PROVIDE MINIMUM 5'DEADBAND.
4.7-DAY PROGRAMMABLE THERMOSTAT WITH LOCKOUT.
5. INSTALL GFCI OUTLET WITHIN 25' OF UNIT.
6. PROVIDE COMMISSIONING REPORT.
7. VERIFY ALL DUCT DIMENSIONS PRIOR TO INSTALLATION,
S. ALL DUCT DIMENSIONS ARE CLEAR INSIDE DIMENSIONS.
9. INSULATE ALL DUCT PER WSEC.
10. SEAL ALL DUCT PER WSEC.
Project Information Project Title: Ea.bd..t Date 1/1/2015
Applicant Information. Provide contact information forindividual who can respond to For Building Dept. Use
inquiries about comprance form information provided
Company Name: COMFORT MECHANICAL
Company Address: 3202 C ST NE AUBURN, WA 98002
Applicant N.— JESSE CHUTICH
Applicant Phone: 425 251 9840
Project Description E]New Building EIGuilding Addition []Tenant Improvement QSystern Retrofit []NO System Changes
Briefly describe mechanical systems In Replace(1)3-ton unit with new like unit,
the text box provided
E]Total Bldg Performance (TBP)
This path includes all mandatory
previsions per C401.2 Option 7 MECH_SUM MECH-CHK and C407
Energy Analysis form, required.
❑ Load calwk,tionsummary ❑ MECH-LOAD-CALC Form
Design Load Calculations Provide design load calculations for allmechenicalsystemsandequipmentsolvingthebuildingheating,coolingor
—fil.tingmiMs If. load calculation .—ory I. provided with the permit documents that Inductee all applicable
compliance inknuation then the MECH-LOAD-CALC form is not required,
[�J plan. 0 MECH-EQ Form. (TOD)
Mechanical Schedules Indicate locati., or equipment compfiancs, information. If provided on plans then MECH-EQ form, are not required, h.wo-c Include on plans all applicable compliance information listed in MECH-EQ tables.
❑ DOAS is required per C403.6 effective July 1. 2017 (office, retail, education, library and fire station occupancies)
All occupied, conditioned areas shall be served by a DOAS that delivers required ventilation air in . manner that does
not require space conditioning fan operation Space conditioning face cycled offwh,n ho, beefing or cooling is required.
Dedicated Outdoor Air 0 Ventitalich provided via natural ventilation per 2016 IMC in lieu of OCAS (C403.6, Exception 1)
System Requirements and El Venfila4ch and spew conditioning provided by a HEVAV system per C403.7 in lieu of DOAS (G403.6, E—pfloh
2)
High Efficiency VAV 0 DOAS included in project, although not required (occupancy not office, netall, education, library or fire station)
Alternate E] DOAS rela'3d allowances included in project:
El Preach,ove vertical fenestration maximum area allowance increased to 40% per C402.4.1,4 Win 100% of
condltiurad floor area in building served by DOAS
❑ Exception to air economizer per C403.3 Exception 1, include MECH-ECONO four,
Project lncl,,Aes HVAC air distribution systems that Previte heating andlor cooling
lilies, p: a MECH-FANSYS -SUM lemn.
Fan Power ❑ For one o-ore, systems, the total fan motor nameplate hp of all fans in HVAC system exceeds Shp.
dyes, provide a separate MECH-FANSYS form for each HVAC system —ding the 5 horsepower threshold,
Rate, to Sellior, C403.2. 11 and MECH-PANSYS-DOC for requirements and exception.
E] Hydroric drilled water E] Water -loop heat pump No hydronic systems
HVAC Hydronic Systems
El Hydromc hfing -far El Geothermal
E] C406.2 More efficient HVAC equipment and fan systems
Requires 90% of healing and cooling capacity to be equipment listed in tables C403.23(l).(9) or si,.to—trh..l
pumps and Past recovery chill... All equipment Noted In tables C403.2.3(l)-(7) ..at in, 15% more aKrchmt than
hrimmurn requirements. As stand alone suppN. catum, and exhaust fans over Thp must have FEQ a 71 and must be
C406 Additional Efficiency selected WOO 10% of maximum total or static pressure.
E] C4 06 6 Dedcated Outdoor air system (DOAS)
Options - Mechanical Requires 90% ofoorditioned floor area to be served by a DOAS per C4036 that defivers, required mcidethm air in
,rachal that does not require space conditioning fan operation.
❑ 0406.7 Reduced energy in service water heating
Requires 90% of flocra"abefin occupancy types listed in C406.7.1 an that 60% ofannual hot waterareigy use be
provided by beef pump, waste heat recovery or solar water -heating systems.
REVISIONS
d
z
00
(l)
MM C0
ii Lf)
0
t.
00
U. '<
Z 0
U) a) to
cl
In
04
HVAC Air Distribution System Scheeule
List all HVAC systems that have the capability to provide heating and/or cooting to the spaces they serve.
Fan Power
U)
Primary
Systemor
Supply ply
Fen ID
Speed Control
(Note 1)
Description
(Note 2)
System Total
Nameplate
(Note 3)
Calculation
HP Required
(Note 4)
LU
00
> 00
RTU4
CV
Heat Pump
0.76
No
SEPARATE PERMIT
FOR,
< I—
LL1 00
Mechanical
Electrical
le
FWREQUIREID
0"
< <
Plumbing P I
Gas Piping
z
City of Tukwila
BUILDING DIVISION
< U)
r.,t < <
_J
z
UJ
IF
U) Se
(y)
Note 1-Constant Volume (CV), Variable Air Volume (VAV), or HospitallLab CV system that qualifies for VAVbudget per C4032 11. 1 ExceptionODE
Single— VAVayal.rda.h.IIq..p1yasCV.
Not. 2 - Describe system type and list all fans (or groups of fans) associated with the delivery and removal of conditioned aurby the system. Include
CO', FLIANC
APPRO,,W
CO D
LU I
all supply, ratrimuhalfet, exhaust and exhaust h-vas (> I hp), make-up air, dedicated outside air (DOAS), booster fans, and series fan-powels,
terminals. VA Ian -powered han-powed terminals and economizer foliations do not need to be included it the fans do not operate atpeak
c-diflo S* Note 3 - Enter total hp ofafflansassoca fedwith the delivery and removal of air by the system.
the
Note 4 _ This to- automatically identities whether a MECH-FANSYS form is required to demonstrate compliance with the fan power allowance (Yes)
or this information is not required because the system has a combined total nameplate motor he that is 5 hp or less (No)
C I J
DT 09 2019�,
City Of Tukwila
JILD' G
IS CAL
;
DRAWN,
I
MECH-FANSYS Forms
a c 5 hp. Select
(Add Fan A MECH FANSYS iota shall provided for system with 7 olate h master
state an additional firchn. Added Isms ca be delete wl u n
System Farm) to generate 6
\1 MC!0N
CHECKED:
"than
F11
flarnrift NO,
REViSQNS P rho' " " r—
11 "ar, revew am')val Is 54)ECI -0 erroll abut
1,j, Tile 1,70ce Omissions ADor.1val Cf TrstrtCllon ao(UmentSJoe,
8utnOftZe 11
e v,olanor 3. an
�I WO i Y ajOD:ed Do,
' i of apprDjeo F,I� Cor
t kwila wo
actro a.
w:!l 't?],:r� 3 new Dlar. By -l"D
S110111W,a" ZVI,: 1 r, 'jalli"'Pal plan review
or
0, 0 3
HVAC Equipment Schedule (New)
At
RTU-1
Brand
Carrier
Model
50VF-C36
Ton
3
I TotaICFM
V56
Cap. Heat
34,000
Cap. COOT
34,000
E R
14
Weight Sound(bels)
387
74
Location
Roof
M 1 0
00-000
onv?