HomeMy WebLinkAboutPermit PG19-0159 - COSTCO / TIRE CENTER - REPLACE URINAL AND LAVATORY TOILETCOSTCO TIRE CENTER
400 COSTCO DR 150
PGI 9-0159
C)
Parcel No:
Address:
��^�«x ^���~m/�v�v^U
w~�~� v�n Tukwila
of
Department -^ Community Development
63DOSouthcenterBoulevard, Suite #1OO
Tukwila, Washington 881O8
Pbone:2O6-431,367U
Inspection Request Line: 206-438-9350
Web site: http://www.TukwilaWA.Rov
PLUMBING/GAS PIPING PERMIT
2523049063 Permit Number: PGI9-0159
40000ST[0DR150
Project Nome: COSTCO'TIRE CENTER
Issue Date: 10/25/2019
Permit Expires On: 4/22/2020
Owner:
Name:
Contact Person:
Contractor:
COSTCOWHOLESALE O]RPORATO
999LAKE DRPROPERTY TAX DEPTOO6
|5SA8UAH'WA, 98OZ7
NRG|NIA8RANOH
PLUMBING PRO'S LLC
Address: POBOX 188'8U[KLEY WA, 98321.
0188
License No: PLUMBPL947PL
Address:
'''
Phone: (360) 829-5334
Phone: <360829'6539
Expiration Date: 10/13/2020
DESCRIPTION OF WORK:
PULL AND REPLACE (1) URINAL, (1) LAV- TOILET IN THE TIRE CENTER.
Valuation of Work: $6,250.00
Water District: 0KW|LA
Sewer District: TUKWILA
Fees Collected: $172.90
Current Codes adopted bythe City ufTukwila:
International Building Code Edition:
International Residential Code Edition:
International Mechanical Code Edition:
Uniform Plumbing Code Edition:
International Fuel Gas Code:
015
20152015
2015
2015
National Electrical Code:
VVACities Electrical Code:
VVA[296-468:
y Code:
Permit Center Authorized Signature:
I hearby certify that I have read and examined this permit and know the same to be true and correct. All
provisions of law and ordinances governing this work will be complied with, whether specified herein or not.
The granting of this permit does not presume to give authority to violate or cancel the provisions of any other
state or local laws regulating construction or the performance of work. I am authorized to sign and obtain this
development permit and agree to the conditions attached to this permit.
Signature:
Print Name:
This permit shall become null and void if the work is not commenced within 180 days for the date of issuance, or if
the work is suspended or abandoned for a period of 180 days from the last inspection.
PERMIT CONDITIONS:
1: ***PLUMBING/GAS PIPING PERMIT CONDITIONS***
2: No changes shall be made to applicable plans and specifications unless prior approval is obtained from the
Tukwila Building Division.
3: All permits, inspection records and applicable plans shall be maintained at the job and available to the
plumbing inspector.
4: All plumbing and gas piping systems shall be installed in compliance with the Uniform Plumbing Code and
the Fuel Gas Code.
5: No portion of any plumbing system or gas piping shall be concealed until inspected and approved.
6: All plumbing and gas piping systems shall be tested and approved as required by the Plumbing Code and
Fuel Gas Code. Tests shall be conducted in the presence of the Plumbing Inspector. It shall be the duty of
the holder of the permit to make sure that the work will stand the test prescribed before giving notification
that the work is ready for inspection.
7: No water, soil, or waste pipe shall be installed or permitted outside of a building or in an exterior wall
unless, adequate provision is made to protect such pipe from freezing. All hot and cold water pipes
installed outside the conditioned space shall be insulated to minimum R-3.
8: Plastic and copper piping running through framing members to within one (1) inch of the exposed framing
shall be protected by steel nail plates not less than 18 gauge.
9: Piping through concrete or masonry walls shall not be subject to any load from building construction. No
plumbing piping shall be directly embedded in concrete or masonry.
10: All pipes penetrating floor/ceiling assemblies and fire -resistance rated walls or partitions shall be protected
in accordance with the requirements of the building code.
11: Piping in the ground shall be laid on a firm bed for its entire length. Trenches shall be backfilled in thin
layers to twelve inches above the top of the piping with clean earth, which shall not contain stones,
boulders, cinderfill, frozen earth, or construction debris.
12: The issuance of a permit or approval of plans and specifications shall not be construed to be a permit for, or
an approval of, any violation of any of the provisions of the Plumbing Code or Fuel Gas Code or any other
ordinance of the jurisdiction.
13: The applicant agrees that he or she will hire a licensed plumber to perform the work outlined in this permit.
14: All new plumbing fixtures installed in new construction and all remodeling involving replacement of
plumbing fixtures in all residential, hotel, motel, school, industrial, commercial use or other occupancies
that use significant quantities of water shall comply with Washington States Water Efficiency ad
Conservation Standards in accordance with RCW 19.27.170 and the 2006 Uniform Plumbing Code Section
402 of Washington State Amendments
PERMIT INSPECTIONS REQUIRED
Permit Inspection Line: (206) 438-9350
1900 PLUMBING FINAL
CITY OF TUKWILA
community Development Department
Permit Center
6300 Southcenter Blvd., Suite 100
Tukwila, WA 98188
h ttp://www.TukwilaW A.gov
0
, Apt A
Plumbing/Gas Permit No. ra /if
Project No.
Date Application Accepted: /0""' et
Date Application Expires: dAfteitl*"--
(For office use only)
PLUMBING / GAS PIPING PERMIT APPLICATION
Applications and plans must be complete in order to be accepted for plan review.
Applications will not be accepted through the mail or by fax.
**Please Print**
SITEOCATION
Site Address:
King Co Assessor's Tax No.:
4100 C45'17—t)
Tenant Name: C—OSA-0
PROPERTY OWNER
Name: (...0 6,./za.5
czy. e
Address: e? f "
/
City-5- 5„.....7, u 0_4._ State: t.oce., Zip:
CONTACT PERSON — person receiving all project
communication
r
Name: -
/ pt,i 0%,...—
Address: LA—ee /at'
City:6 State: too_ Zip:
Phonejiat) , —
Email: 0 ; (....p.frva...- C.-4)
Suite Number: Floor:
New Tenant: ID Yes cVeNo
PLUMBING CONTRACTOR INFORMATION
Company Name: 4'1 J
I' /13/41.,e, it..._.3
Address:
City: State: 0
0 Ur-/V17 State:
a...._
Zip: cicj-5
Phone: gerx6 _FL. 33Fe,c
36 6 ,
8 01 ._ 4.s
Contr Reg No_._.
v L /Mc- I
ate;
/c.)/3///1
Tukwila Business License No.:
Valuation of Project (contractor's bid price): $ 4
Scope of Work (please provide detailed information):
u I
t o-O - L_G-U — -7
e-S4
Building Use (per Int'l Building Code).
Occupancy (per Int'l Building Code):
Utility Purveyor: Water
12t-
Sewer:
1-1:1ApplicaiionsTurms-Applications On Line \ 2011 ApplicationsTlumbing Permit Application Revised 8-9-11:duos
Revised: August 201
Oh
Page 1 of 2
Indicate type of plumbing fixtures and/or gas piping outlets being installed and the quantity below:
Fixture Type
Qty
Bathtub or combination
bath/shower
Dishwasher, domestic with
independent drain
Shower, single head trap
Sinks
Rain water system — per
drain (inside building)
Grease interceptor for
commercial kitchen (>750
gallon capacity)
Each additional medical
gas inlets/outlets greater
than 5
Atmospheric -type vacuum
breakers not included in
lawn sprinkler backflow
protections (1-5)
Fixture Type
Qty
Bidet
Drinking fountain or water
cooler (per head)
Lavatory
Urinal
Water heater and/or vent
Repair or alteration of
water piping and/or water
treatment equipment
Backflow protective device
other than atmospheric -
type vacuum breakers 2
inch (51 nun) diameter or
smaller
Atmospheric -type vacuum
breakers not included in
lawn sprinkler backflow
protections over 5
Fixture Type
Qty
Clothes washer,
domestic
Food -waste grinder,
commercial
Wash fountain
Water closet
Industrial waste
treatment interceptor,
including trap and vent,
except for kitchen type
grease interceptors
Repair or alteration of
drainage or vent piping
Backflow protective
device other than
atmospheric -type
vacuum breakers over 2
inch (51 mm) diameter
Gas piping outlets
Fixture Type
Qty
Dental unit, cuspidor
Floor drain
Receptor, indirect waste
Building sewer and each
trailer park sewer
Each grease trap
(connected to not more
than 4 fixtures - <750
gallon capacity
Medical gas piping
system serving 1-5
inlets/outlets for a specific
gas
Each lawn sprinkler
system on any one meter
including backflow
protection devices
PERMIT APPLICATION NOTES -
Value of Construction - In all cases, a value of construction amount should be entered by the applicant. This figure will be reviewed and is subject
to possible revision by the Permit Center to comply with current fee schedules.
Expiration of Plan Review - Applications for which no permit is issued within 180 days following the date of application shall expire by limitation.
The Building Official may grant one extension of time for an additional period not to exceed 180 days. The extension shall be requested in writing
and justifiable cause demonstrated. Section 103.4.3 International Plumbing Code (current edition).
I HEREBY CERTIFY THAT I HAVE READ AND EXAMINED THIS APPLICATION AND KNOW THE SAME TO BE TRUE UNDER
PENALTY OF PERJURY BY THE LAWS OF THE STATE OF WASHINGTON, AND I AM AUTHORIZED TO APPLY FOR THIS PERMIT.
BUILDING OWNER OR AUTHORIZED rNT:
Signature:
-1,7a Date:
Print Name:
Mailing Address:
0— C4X46242...<Day Telephone: t_6Z5 Z7 S 3 3 V
7D 78-'e (.5e
K—lerie7
14)4-
State Zip
H:Vtppl iestions \ Forms -Applications On Line1201 I ApplicationskPlumbing Permit Application Revised 8-9-11.docx
Revised: August 201
bh
Page 2 of 2
IIP
Cash Register Receipt
City of TukvOila
R18852
DESCRIPTIONS
ACCOUNT
QUANTITY
It
PAID
,„„,..:'Zrt.11A*11, '
Per m itTRAK - T'-', t.,,, .1.• ,141 ",1, t , (",,,,,,";! -
I ,.,, , , ,, ,,,*:, ,,, , ,,,,, ,
0 4,-''
- 172:
PG3.9-0159 Address: 400 COSTCO DR 150 Apn 2523049063 , ' "
,'
''' '$172.90
PLUMBING
$166.25
PERMIT FEE
R000.322.100.00.00
0.00
$98.00
PERMIT ISSUANCE BASE FEE
R000.322.100.00.00
0.00
$35.00
PLAN CHECK FEE
R000.322.103.00,00
0.00
$33.25
TECHNOLOGY FEE
6,65
TECHNOLOGY FEE
TOTAL FEES PAID BY RECEIPT: R18852
R000,322.900.04.00
,
0.00
$6.65
$172.90
Date Paid: Friday, October 18, 2019
Paid By: PLUMBING PRO'S LLC
Pay Method: CHECK 55680
Printed: Friday, October 18, 2019 7:42 AM 1 of 1
CR
SYSTEMS
INSPECTION RECORD
Retain a copy with permit
PERMIT NO.
CITY OF TUKWILA BUILDING DIVISION
6300 Southcenter Blvd., #100, Tukwila, WA 98188 (206) 431-3670
Permit Inspection Request Line (206) 438-9350
Proje t:
Type of Inspection:
Address:
1100 CCS"'TG3
Date Called:
Special Instructions:
&U,..1.-. //
447,�
Date Wanted:
p.m.
'Requester:
Phone No:
Approved per applicable codes.
COMMENTS:
Corrections required prior to approval.
nspecto
Date:
REINSPECTION FEE REQUIRED. Prior to next inspection, fee must be
paid at 6300 Southcenter Blvd.. Suite 100. Call to schedule reinspection.
PULL - R?L-- Fi TuV,5
ToTE - 0 iNRooM
SEPARATE PERMIT
REQUIRED FOR:
Mechanical
Electrical
Plumbing
Gas Piping
City of Tukwila
BUILDING DIVISION
REVISIONS
No r.a"' :r.' sna l to toe scope
Of or witn0ut 322roval Ol Ole
Tukwila Bulldog Div,s'on.
NOTE: Revisions will require a new plan
submittal and may Include 3o0oonal plan review,
'1A//'LA �p41'GU"
4/00 I$4
r(ukv14A 98t88
Pop
FILE CO
Psmt Na t ' t
PIP revew approval is subject to errors and
drnasions. Approval of construction documents Goes
not authorize the violation of any aaooled cone or
ordinance Receipt of approved Fela Coov and
noitions a acNge itg
By
Date:
my of TuKwiia
BUILDING DIVISION
REVIEWED FOR
CODE COMPLIANCE
APPROVED
0C1212019
City of Tukwila
BUILDING DIVISION
RECEIVED
CITY OF TUKWILA
OC1' 112019
0 6159 PERMIT CENTER
e
FILE
REVIEWED FOR
CODE COMPLIANCE
APPROVED
OCT 21 2019
City of Tukwila
BUILDING DIVISION
P519.-o159
RECEIVED
CITY OF TUKWILA
OCT 1 7 2019
PERMIT CENTER
4
c'P
2
•
•
•
2
Not sure why they are sideways.
Georgia Wattam
Costco Corporate Warehouse Facilities Department
Project Coordinator
(425) 427-7164 office
(425) 785-4076 cell
(425) 313-6555 fax
3
Lena Cooper
From: Georgia Wattam <gwattam@costco.com>
Sent: Wednesday, June 12, 2019 1:12 PM
To: Larry Prescott
Subject: #06 T
Larry,
These were taken b the warehouse. You will rob , 1 : et better ones when you go.
•
•
•
5
LAV-2 LAVATORY
KOHLER®
Features
Single faucet hole.
• Oval basin.
• Overflow drain.
• Includes wall hanger.
Material
• Vitreous china.
Installation
• Wall -mount
• Drilled for concealed arm carrier installation.
Optional Accessories
K-8998 P-Trap
K-1998 Shroud
Components
Additional included component/s: Hanger (2 required).
REVIEWED FOR
CODE COMPLIANCE
APPROVED
OCT 21 2019
City of Tukwila
BUILDING DIVISION
BrenhamTM
Wall -Mount Bathroom Sink
K-1997-1
ADA
CSA B651
OBC1
Codes/Standards
ASME A112.19.2/CSA B45.1
ADA
ICC/ANSI A117.1
CSA B651
OBC
KOHLER® One -Year Limited Warranty
See website for detailed warranty information.
Available Color/Finishes
Color tiles intended for reference only.
Color
Code Description
0 White
96 Biscuit
47 Almond
7 Black BlackTM
P6 19- 59
RECEIVED
CITY OF TUKWILA
OCT 1 7 2019
PERMIT CENTER
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
4-30-2016 04:09
THE BOLD LOOK
OF KOHLER.
LAV-2 LAVATORY
01'1/4^
Leveling Screw Hole
4^(1O2m
8-1/2"
13-3/4" (216mm)
(14 mm
31"
29-1/8^
28'1/2"
(72 mm)
6D1'1/4"
Locking Device Hole
21-16/16^ (557mm
3/B"' 3/8"
Hot Cold
—T
(1O2mm)
��I /I �
7,,nw:"
�~��` '
p�pxxn/ 'Oon���
-1/2^
lz_,m^
... ....
(�mm) flar,
Concealed Arm
Hole Locations
Standard Installation
Technical Information
All product dimensions are nominal.
Bowl configuration:
Installation:
Bowl area (Only)
Bowl area
Number ofdeck holes:
Fauootho|e(o):
Drain hole:
Single
Wall -mount
Length: 14-30''(365mm)
Width: 12'5/1G"(313mm)
With overflow: Yes
Water depth: 3-1/4'(83 mm)
With overflow: Yes
1
1'3/8^(3bmm)
1Q-3/4^
(502 mm
pQ7m
Brenham"'
Wall-Mount Bathroom Sink
/
�
' —— —
. .
� , x
��
27-1 Pin
(686mm) L.. \
�/ u:/um m
|911 T-
| (22 mm)
I Min
Recommended ADA/TASUnotaUmdmn
I `
, '1�,
31
(78 mm)
24" ommMin ' ` ~
/m1\[— \
`--'—`11^(27Q
|
91. r_--
|
(229mm)
Min
Children mEnvironment 6-12yra
ReoomnnendmdADA/TAS Installation
Notes
Install this product according hothe installation
instructions.
ADA.QBC.CSABG51compliant when installed
8othe specific requirements of these regulations.
(1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, gotoxwmw.koh|ar.com.
4'30'201604:09
T��
./ � BOLD u^^O.`
LAV-2 LAVATORY
E
CODE NUMBER
33151838T
DESCRIPTION
Battery Power Supply, Below Deck Thermostatic Mixing Valve,
Polished Chrome Finish, 0,5 gpm, Multi -Laminar Spray, Infrared
Sensor, Smart Faucet, OptimaBattery-Powered Deck -Mounted Low
Integrated Base Body Faucet,
DETAILS
• Flow Rate: 0.5 gpm (2 Lpm) (0.5GPM)
• Spray Type: Multi -Laminar (I>ILM1
• Sensor Type: Infrared tiR
• Mounting Type: 4" Centerset
• Power Supply: Battery tE3A1-)
• Temperature Mixer: Below Deck Thermostatic Mixing Valve (PDT)
• Finish: Polished Chrome ICI,1
• Factory Default Timeout: 30s
• Factory Default GPC: 0.25
FEATURES
Commercial Grade, ADA Compliant, Electronic, Sensor -Activated, Cast
Brass 4 Centerset Hand Washing Faucet with the following features:
• Splash -proof Circuit Control Module
• Sensor Range Adjustment Screw
• Low Battery LED Indicator Light
• User friendly Variable Time Out Settings
• Serviceable Filtered Solenoid Valve Vandal Resistant Spray Head
with Pressure Compensating Flow Control
• Metal Jacketed Wire Protection for Sensor lead
• Includes four (4) AA -size Alkaline Batteries
• Appropriate Mounting Hardware included
ELECTRICAL SPECIFICATIONS
• Battery Life: 2 years
• Self -Adjustment Range: 2"-?' (51-178mm)
• Sensor Range: 4' -5" (102-127mm)
VIDEOS
Optima Faucet App
Sloan Optima Below Deck Faucet
DOWNLOADS
• EBF 615/650 Installation Instructions
• EBF 615/650 (SP) Installation Instructions
• ETF600/E13F650 Trim Plate Installation Instructions
• EBF 6151650 (French) Installation Instructions
• Optima Smart Faucet Below Deck Installation Instructions
• Faucet Spray Heads Repair and Maintenance Guide
• Optima Plus EBF 615/650 Repair and Maintenance Guide
• ETF-6001E6F-650 Below Deck Repair and Maintenance Guide
OPTIMA O SENSOR FAUCET
F-650-BAT-EIDT-CP-0.5GPM-MLM-IR-BT-FCT
49/ir
35/r
(82 min)
23/1G*
(56 min)
17/32" (31 mm)
27/16"
(62 mm)
COMPLIANCES & CERTIFICATIONS
(Wor.iit
Ohs"
mm)
—(102 mm)
(ADA Compliant, CalGreen Compliant, CEC Compliant, GPC
0.25 or less, UL Certified, UPC Low Lead Compliant)
RECOMMENDED SPECIFICATION
Faucet shall include cast brass body, quick -connect fittings,
twist-off/shut-off solenoid assembly, removable battery
cartridge, flexible power supply and allow adjustment of
settings wirelessly via Apple or Android smartphones.
NOTES
All information contained within this document subject to
change without notice.
Looking for other variations of the EBF-650 product? View the
general spec sheet with all options.
Find a matching soap dispenser for this faucet.
Find a compatible sink for this faucet.
WARRANTY
3 Year
Sloan 10500 Seymour Ave, Franklin Park, IL 60131
Phone: 800.982.5839 • Fax: 800.447.8329 * sloan.com
Code 3315183BT • Downloaded 10/26/18 • Revised 10/17/18 • View Latest Version
Page 1 of 2
LAV-2 LAVATORY
• Additional Downloads
ROUGH -IN
EBF-650 Faucet with Bak-Cheice Tee
for Hot and Cold Water Supply
SPOUT
V(13 mm) MIN
DIA. HOLE
REQUIRED
(2 PLACES)
WINS NUT AND
SLOTTED WASHER
1/8' (3 mm) NPT PIPE
TO 3/8" (10 mm) TUBE
COMPRESSION
FITTING
3/8' (10 mm)
SUPPLY TUBE
(NOT SUPPLIED)
3/8' (10 mm)
COMPRESSION
CONNECTION
SOLENOID
VALVE
3/8' (10 mm)
COMPRESSION
CONNECTION
3/13' (10 mm)
BAK•CHEK TEE
1' (25 mm) MIN.
DIA, HOLE
REQUIRED
BASE GASKET
CONTROL
MODULE
TRANSFORMER
(OPTIONAL)
3/8' (10 mm)
SUPPLY TUBE
(NOT SUPPLIED)
HOT . COLD
SUPPLy—,
(;;;-JSUPPLY
3/8' (10 mm) COMPRESSION STOPS (NOT SUPPLIED)
OPTIMA€ SENSOR FAUCET
EBF-650-BAT-BDT-CP-0.5GPM-MLM-IR-BT-FCT
EBF-650 Faucet with BDM and BOT Variation Mixing Valves
for Hot and Cold Water Supply
SPOUT
112" (13 mm) MIN.
DIA. HOLE
REQUIRED ,
(2 PLACES)
1/8' (3 mm) NPT
PIPE TO 3/8'
(10 mm) rueE - -
COMPRESSION FITTING
3/8*(10 mm) SUPPLY
TUBE (NOT SUPPLIED)
INSTALL BONI OR BOT
VARIATION MIXING
VALVE BETWEEN
SUPPLY STOPS AND
SOLENOID VALVE
INLET
1-4 ••••4)1
BOT VARIATION
(BELOW DECK
THERMOSTATIC)
MIXING VALVE
1' (25 mm)
OW HOLE
REQUIRED
BASE GASKET
BOY VARIATION (BELOW DECK
MECHANICAL) MIXING VALVE i
HOT SHOWN INSTALLED COLD
SUPPlo
r SUPPLY
3/8' (10 mm) COMPRESSION STOPS (NOT SUPPLIED)
Sloan 10500 Seymour Ave, Franklin Park, IL 60131
Phone: 800,982.5839 • Fax: 800.447.8329 • sloan corn
WING NUT AND
SLOTTED WASHER
CONTROL
MODULE
NSFORME
(OPTIONAL)
(10 mm)
SUPPLY TUBE
(NOT SUPPLIED)
Code 33151838T • Downloaded 10/26/18 • Revised 10/17/18 • View Latest Version
Page 2 of 2
LAV-4 LAVATORY
ZURN.
Z6913-XL
AquaSense Battery Powered Faucet
Engineering Specification
MOM XL LIAO FREE
Shown with -CP4 option
Flow Control Options: Slim Flow Outlets
0-FS 0.5 gpm/1.9 Lpm Vandal -Resistant Non -Aerated
0-JS*1.5 gpm/ 5.7 Lpm Vandal -Resistant Laminar Flow
D-LS 1.0 gpm/ 3.8 Lpm Vandal -Resistant Aerated
0-MS 0.35 gpm/1.3 Lpm Vandal -Resistant Non -Aerated
0-K* 1.0 gpm/3.8 Lpm Vandal -Resistant Laminar Flow
*NOTE: Old style flow outlets also available.
Power Supply Choices (Sold Separately)
e-ACA 6 VDC Plug -In Power Converter
0 -HW6 Hardwired Power Converter
Optional Power Supply Accessories
0 -CWB Connector Wire for Hardwire Install
0 -MJ Mini Junction Box
NOTE: For Hardwire applications furnish P6000-HW6
power converter. Order P6000-HW6 power converter
seperately.
The P6000-HW6 and P6000-MJ will power up to 8 sen-
sor faucets.
Architectural/Engineering Approval
The information contained in this document is subject to change without notice.
Please contact Zurn or most up to date information,
ZURN INDUSTRIES, L.L.C. • COMMERCIAL BRASS OPERATION
5900 EL WIN BUCHANAN DRIVE • SANFORD NC 27330
PHONE:1-800-997-3876 • FAX: 919-775-3541
WWWZURN.COM
IN CANADA:ZURN INDUSTRIES LIMITED
7900 GORE WAY DRIVE UNIT 10 • BRAMPTON, ONTARIO L6T5W6
PHONE:905-405-8272 FAX:905-405-1292
AquaSense®
TAG
ADA compliant, battery powered, chrome plated sensor
faucet for retrofit and new construction.
• Flow Rate
1.5 gpm Vandal Resistant Aerator(-E*)
• Occupant Detection
Infrared convergence -type proximity sensor
Thirty Second Time out feature
• Spout module
Chrome Plated Cast Brass
• Also Includes
In -line filter
4 "AA" batteries
Inlet for a 1/2113] ball riser
Single supply hose
Accessories
E3 -10S Ten Second Time out Feature
0 -ADM Above Deck Mixer
0 -ADM-1 Above Deck Mixer w/4" Cover Plate
0 -ADM-2 Above Deck Mixer w/8" Cover Plate
O -CG CareGuard Aerator
0 -CP4 Cover Plate 4[102] Centers
O -CP8 Cover Plate 8[203] Centers
0 -DSA Drug Screening Applications
O -H4 Wrist Blade handle for ADM
O -MT Mixing Tee
O -MV Temperature Mixing Valve
O -SH Supply Hoses for Mixing Valve
O -TMV Thermostatic Mixing Valve for Multiple
Faucets
O -TMV-1 Thermostatic Mixing Valve for Single
Faucets
O - Other
Careguard currently only available with -E, 1.5 Vandal
Resistant Laminar Aerator.
*This product should be used with a
WaterSense labeled counterpart with a
compatible flush volume to ensure that the
entire system meets the requirements for
111,,Df water efficiency and performance.
LAMP PV
Zurn Lead Free products (-XL) is the line of durable, high
quality brass faucets and fixtures that are designed and
manufactured to comply with Section 1417 of the Safe
Drinking Water Act (SD WA) which mandates the weighted
average lead content of no more than 025% of the wetted
surface.
AquaSense is a registered trademark of Zurn Industries, LLC.
Rev. D
Date:4/27/2017
Dwg. No. 310889 Product No. Z6913-XL
LAV-4 LAVATORY
TYPICAL Z6913
AquaSense Battery
Powered Faucet
NOTE: Recommended
through hole diameter to
properly mount the
spout/shank is 1-1/8" to
1-1/4".
FAUCET SPOUT
Vv7 SENSOR
ELECTRONICS MODULE
W/ SOLENOID 7
44
4
[120]
TYPICAL Z6913-ACA
AquaSense Plug -In
Powered Faucet
5
b
[160
—ACA PLUG—IN
POWER CONVERTER
TYPICAL Z6913-CWB
AquaSense Hardwire
Powered Faucet
Optional:
* Optional -MJ mini junction box
for connecting up to 8 faucets
NOTE: MUST USE EITHER ZURN
P6000-HW6 HARDWIRE POWER
CONVERTER OR ZURN P6000-
ACA PLUG-IN POWER CON-
VERTER TO ENSURE PROPER
OPERATION. USING A POWER
CONVERTER OTHER THAN
ZURN MAY RESULT IN OPERA-
TION MALFUNCTION OR UNIT
FAILURE.
138
[163]
7r6
[186]
2
DC COMMON (CND)
(SOLID BLACK)
*OPTIONAL MINI
JUNCTION BOX
_
ZURN INDUSTRIES. LLC. • COMMERCIAL BRASS OPERATION [1 1 51
5900 EL WIN BUCHANAN DRIVE • SANFORD NC 27330
PHONE:1-800-997-3876 • FAX' 9/9-775-3541 —OWN CONNECTING WINE
VIMMIZURN.COM (LENGTH 7ft.)
IN CANADA: ZURN INDUSTRIES LIMITED
7900 GORE WAY DRIVE UNIT 10 r BRAMPTON, ONTARIO L6T5W6
PHONE: 905-405-8272 FAX; 905-405-1292
Optional ixing Valves
H 3/8 COPPER
TUBE
\(B`f OTHERS)
Li BRASS MIXING TEE Li
CD RD
COMPRESSION NUT
BRASS FERRULE
FILTER HOUSING
BACK CHECK =
FILTER
-PLASTIC FERRULE
P6900-MT
Mixing Tee
2
—1i—
P6900-MV
Temperature Mixing Valve
-F7VDC
r (BLACK W/ STRIPE)
P6000— HW6
POWERS UP
TO 8 FAUCETS
EQUIP. CND
(GREEN)
NEUTRAL
(WHITE)
15 VAC
(BLACK)
\__ EXTENSION WIRE NOT PROVIDED
(ORDER FROM OTHER
SUPPLIER) RECOMMEND
TYPE CMP, CMR, CMX, OR
OTHER UL CATAGORY TYPE
CABLE (22-18AWC) TO MEET
INSTALLATION AND CODE
REQUIREMENTS.
AquaSense is a registered trademark of Zurn Industries, LLC.
U - URINAL
KOHLER®
Features
• Washout urinal.
• 3/4" (190 mm) top spud.
• One gallon or less per flush.
Material
• Vitreous china.
Recommended Accessories
K-10675 WAVE DC 0.5 GPF Urinal Flushometer
K-10676 WAVE DC 1.0 GPF Wshdwn Flushometer
K-10958 Tripointrm DC 0.5 GPF Urinal Flushometer
K-10960 TripointTm DC 1.0 GPF Wshdwn Flushometer
K-13518 Manual 1.0 GPF Wshdwn Flushometer
K-13519 Manual 0.5 GPF Urinal Flushometer
K-4931 Urinal Seam Cover
K-4932 Urinal Seam Cover
K-9172 Urinal Strainer
K-9183 Urinal Strainer
ADA
CSA B651
BranhamTM
Urinal
K-4920-T
Codes/Standards
ASME A112,19.2/CSA B45.1
DOE - Energy Policy Act 1992
ADA
ICC/ANSI A117.1
CSA B651
KOHLER® One -Year Limited Warranty
See website for detailed warranty information.
Available Color/Finishes
Color tiles intended for reference only.
Color Code
0
96
47
40 7
Description
White
Biscuit
Almond
Black BlackTM
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
4-30-2016 05:19
THE BOLD LOOK
OF KOHLER®
U - URINAL
KOHLER,
8"
(203 mm)
3"
(76 mm)
Top of Lip
8-1/2"
(216 mm)
16-1/8"
—(410 mm)
Technical Information
All product dimensions are nominal.
Spud size: 3/4", Inlet, Top
3/4" Spud
Branham TM
Urinal
K-4920-T
18-1/4"
(464 mm)
38-1 2"
(978 mm)
4" (102 mm)
1-1/2" (38 mm)
Notes
Install this product according to the installation
guide.
Refer to manufacturer's instructions and local
codes for flushometer requirements.
ADA, CSA B651 compliant when installed to the
specific requirements of these regulations.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
4-30-2016 05:19
THE BOLD LOOK
OF KOHLER®
U-URINAL
CODE NUMBER
3452674,
DESCRIPTION
O�5gpt Polished Chrome Finish, Polished Chrome Wall Plate Finish,
Single Flush, Hardwired, Sensor -Operated, Kma|(w, Exposed Sensor
uhna|Flvshmnmec
msTmLs
* Rmkvo|umc: 0.5 gnf(l,9 Lpf)
~ Finish: Polished Chrome VCP>
* Wall Plate Finish: Polished Chrome ([r)
° Power Type: Hardwired (HiV)
° Valve: Diaphragm
° Valve Body Material: Semi -red Brass
* Fixture Type: Urinal
~ Fixture Connection: Top
• Rough -In Dimension: D)Y'(29Zmm)
* Spud Coupling: 114^ (18mm)
FEATURES
Quiet, Expnsed, Dual Filtered Diaphragm Assembly, Chrome Rated
Urinal
° Sweat Solder Adapter w/Cover Tube and Cast Wall Flange w/Set
Screw
wnpT|MA!i)sL-z5805e|f-AdapUveInfrared Sensor with Indicator Light
° mnn'Ho|d-openIntegral Solenoid Operator, Fixed Metering Bypass
and mmExternal Volume Adjustment toEnsure Water Conservation
° High Back Pressure Vacuum Breaker Flush Connection with One -
Piece Bottom Hex Coupling wm. Spud Coupling and Flange for 3/4^
Top Spud
° Stop Seat and Vacuum Breaker molded from pERMEXIR) Rubber
Compound for CNommincResistance
° 3m^ |.P.l 5cewUriverBak'Chek(ri) Angle Stop with Vandal Resistant
Stop Cap
° Infrared Sensor with Mu|hpie-focused, Lobular Sensing Fields for
high and low target detection
VIDEOS
mOvALmSENSOR puuaooMsTEm
COMPLIANCES & CERTIFICATIONS
(ADA Compliant, BAA Compliant, BREEAMWater Credit, mPC
Certified, cVp[6ncen Certified, Green Globes Water Credit,
LEEDV4Water Efficiency Credit, Satisfies L[EDCredits, UL
Certified, vVvtersenmListed)
RECOMMENDED SPECIFICATION
Valve Body, Cover, Tailpiece and Control Stop shall be in
conformance with 46TM Alloy Classification fvSemi-ned
Brass. Valve shall beincompliance with the applicable
sections nfASSc1O37and AmB/ASMElz2.l92.
ELECTRICAL SPECIFICATIONS
° Arming Delay: 8semnds
° Control Circuit: Solid State/24VAC |nput/24VAC Output
° Self -Adaptive Window: tn
° Sensor Range: 15"-30' (381-762mm)
° Solenoid Operator: z4VAC
VALVE OPERATING PRESSURE (rLOWimG)
ls-8OPSI (lV3-55ZkPa). Specific fixtures may require greater
minimum flowing pressure ' consult manufacturer
DOWNLOADS
• Royal E35TMV Installation Instructions
° Royal EBConcealed and Exposed Installation Instructions
° cnnuo| Stop Repair and Maintenance Guide
* nosh Connections Flanges Repair and Maintenance Guide
• Tail Piece Repair and Maintenance Guide
° Optima BsRepair and Maintenance Guide
° Additional Downloads
NOTES
All information contained within this document subject to
Sloan ms00Seymour Ave, Franklin Park, uama
Code 3^ozor4^Downloaded uonsos'Revised wm6!m'View Latest Version
Page zofz
U - URINAL
ROUGH -IN
21/4'
186
1"
(25 mm)
21/2"
(64 mm)
ROYAL @ SENSOR FLUSHOMETER
ROYAL 186 US Hardwired-0.5-HW
change without notice.
Looking for other variations of the ROYAL 186 ESS Hardwired
product? View the general spec sheet with all options.
Find a compatible urinal for this flushometer.
Find a compatible water closet for this flushometer.
(7203/mg'
m
C/L OF
ELECTRICAL
BOX —
TOP OF
FIXTURE
43/4'
(121 mm)
Sloan 10500 Seymour Ave, Franklin Park, IL 60131
Phone: 800.9825839 • Fax: 800.4478329 • sloan.com
3/4"
SUPPLY
(ON 20 mm)
CILOF
SUPPLY
111/2"
(292 mm)
Code 3452674 • Downloaded 06/25/19 • Revised 04/06/19 • View Latest Version
Page 2 of?
U-URINAL
Li A
CODE NUMBER
DESCRIPTION
EL-l54(Box Mount) zZVVAC |npuV24VAC Output, 5016UHz, 50VA,
One sLI5^transformer will power upmten (0) OPTIMA ^ES'S"
water closet u,urinal (any combinaunn)nushvmc»e's..
FEATURES
When using Sloan omimaR^ES-5^Oushometers'the transformer
must bespecified and ordered separately. The following transformers
are recommended:
154 (Box Mount) l2OVA[Input/24vA[Output, 50/60 Hz.50
uA(0345154pn)
° EL343(Box Mount) 24VVA[|npuulxvA[Output, 5o/60Hz, 50
vx(0]45999P0
" EL2U8(Foot Mount) I0Vx[|npuV24VACOutput, 50/0Hz, 0V
vA(0345095)
When using Sloan 0p,imaN)BpvrESpSeries faucets, the
transformer must bespecified and ordered separately. Sloan
OptimaeVBTSeries faucets are typically supplied with ptransformer.
Transformers supplied with [TpSeries faucets:
°ETF-4z5(P|ug'in for Canada) Iz0vA[|nput/Z4vAcOutput,
50/5OHz, ]5VA<0]h5079>
° sTF'zas(p|un'in)z2nvAcmnvt/z*vAcOutput, uo/ooHz, a»vA
(03h5534px)(not shown)
• Some Optima rSl faucet installations can be powered by single
transformer, provided the transformer /sproperly sized, Allow a
minimum nfz5v4nfcurrent rating for each faucet orsolenoid
valve heingused, Specify and order the transformer separately, To
order an''ETF^Series faucet less the transformer, specify the''cT^
NOTES
All information contained within this document subject mchange
without notice.
Sloan 1osooSeymour Ave, Franklin Park, /Lao1s1
m`one'ouuem,sxao ' pax:nuu,*47uszo ' moo^cmn
PmT~AccsSSonY
0345154PK
Code oy4sz5*pn'Downloaded o6/z4uo^Revised ozpzo*'View Latest Version
WC WATER CLOSET
EcoVantage® Flush Valve Toilet System
Z561 5-BWL
HET Elongated Wall Hung
TAG
Z5615 Series Elongated
Suffix Options:
0 -RF Retro-Fit Nut Kit for extending carrier
studs from existing wall.
Recommended Trim:
0 Z5955SS-EL Elongated, standard white,
open front toilet seat less cover with stainless
steel check hinge.
Note: To ensure system performance:
Minimum Running Water Pressure = 25 psi.
These dimensions and specifications are subject to change without
notice.
Fixture dimensions meet ANSI/ASME standard A112.19.2 and
CAN/CSA B45 requirements.
Meets the American Disabilities Guidelines and ANSI
A117.1 requirements when installed according to these
requirements.
EcoVantage° is a registered trademark of Zurn Industries
ZURN INDUSTRIES, LLC. • COMMERCIAL BRASS OPERATION
5900 ELWIN BUCHANAN DRIVE • SANFORD NC 27330
PHONE: 1-800-997-3876 • FAX: 919-775-3541
VVWW.ZURN.COM
IN CANADA: ZURN INDUSTRIES LIMITED
3544 NASHUA DRIVE. MISSISSAUGA, ONTARIO L4V112
PHONE: 905-405-8272 FAX: 905-405-1292
Z5615 HET Series
• Zurn High Efficiency Toilets and paired performance flush
valve systems are designed to exceed industry standards,
while using as little as 1.1 gallons of water per flush.
• Universal high efficiency toilet can be specified with 1.28
gpf [4.8Lpf], 1.6 gpf [6.0 Lpf] or dual flush valves.
• Vitreous china
• Elongated front rim
• 2-1/8" fully glazed trapway
• High efficiency siphon jet flush action
• Shipping Weight: 40 lbs.
E 'neering Specification
5615-BWL
EcoVantage High Efficiency Toilet System
- Vitreous China, 1.1 gpf [4.2 Lpf] or greater high
efficiency wall hung toilet with siphon jet flushing
action and elongated front rim with 1-1/2" top spud.
Universal high efficiency toilet is designed to
exceed industry standards with flush volumes of
1.1 gallons per flush or higher.
*Replaces Zurn Z5610
0Z5616-BWL
EcoVantage High Efficiency Toilet System
- Vitreous China, 1.1 gpf [4.2 Lpf] or greater high
efficiency wall hung toilet with siphon jet flushing
action and elongated front rim with integral bedpan
lugs and 1-1 /2" top spud. Universal high efficiency
toilet is designed to exceed industry standards with
flush volumes of 1.1 gallons per flush or higher.
*Replaces Zurn Z5611
Architectural/Engineering Approval
See Zurn One Systems for suggested packages.
Rev. B
Dwg. No.84322
Date: 4/4/12
Product No. Z5615-BWL
WC WATER CLOSET
EcoVantage Flush Valve Toilet System
Z561 5-BWL
HET Elongated Wall Hung
TAG
Rough -in dimensions for Z5615 Series
• Z5615-BWL with top spud, shown with Z6000AV manual valve
24-3 (628]
3 4
- 2-4 [701
18-7 [468]
16
21]
3
14-8 365]
!SHED FLOOR
These dimensions and specifications are subject to change without
nOtice.
Fixture dimensions meet ANSI/ASME standard A112.19.2 and
CAN/GSA 845 requirements.
SECTION THRU, OUTLET
5
-8. [16]
5-1 [140] 3-3 [86]
2 8
BACK VIEW OF FLANGE
Note: For ADA compliance, rim
height should be installed 17" from finished floor.
Meets the American Disabilities Guidelines and ANSI
A117.1 requirements when installed according to these
ZURN INDUSTRIES, LLC. • COMMERCIAL BRASS OPERATION requirements.
5900 EL WIN BUCHANAN DRIVE • SANFORD NC 27330
PHONE: 1-800-9973876 . FAX: 919-775-3541
WWWZURN.COM
IN CANADA: ZURN INDUSTRIES LIMITED
3544 NASHUA DRIVE • MISSISSAUGA, ONTARIO L4VIL2
PHONE: 905-405-8272 FAX: 905-405-1292
EcoVantage0 is a registered trademark of Zurn Industries
Rev. B
Dwg. No. 84322
Date:4/4/12
Product No. Z5615-BWL
WC WATER CLOSET
AquaSense® AV Model
TAG
Exposed ZR6000AV Model
Sensor Operated Battery Powered Flush Valves
For Water Closets
DESIGNED!AD2
Flow Options
1 [251
SUPPLY
2-14[571 MIN.
441081 MAX.
VERRIDE
BUTTON
1 1:21[292 j
1 0.81[257]
4 2
[I 21 ± 1 3]
q[38]
VACUUM
BREAKER
TUBE
_TOP OF
FIXTURE
-WS1 1.6 Gal. Low Consumption
-FF 4.5 Gal. Full Flush
El Standard Flush 3.5 Gallons Per Flush
Suffix Options (Check/Specify Appropriate Options)
-YJ Split Ring Pipe Support
-YK Solid Ring Pipe Support
-YO Bumper On Angle Stop
Other
ENGINEERING SPECIFICATION: ZURN ZR6000AV
AquaSense 'AVExposed Closet Flush Valve - Exposed, quiet
diaphragm -type, chrome plated, flushometer valve with a polished
exterior. Complete with Zurn's TPE chloramine resistant dia-
phragm with a clog resistant by-pass. The valve incorporates a
6VDC solenoid valve, a battery powered automatic sensor with
manual override push button, a brass electronics housing with
polished chrome plated exterior, high back pressure vacuum
breaker, one piece hex coupling nut, adjustable tailpiece, spud
coupling and flange for top spud connection. Control stop has
internal siphon -guard protection, vandal resistant stop cap, sweat
solder kit, and a cast wall flange with set screw. Internal seals
are made of chloramine resistant materials.
This space is for Architectural/engineering Approval
ZURN INDUSTRIES, INC. COMMERCIAL BRASS OPERATION • 5900 ELWIN BUCHANAN DRIVE SANFORD NC 27330
Phone: 1-800-997-3876 # Fax: 919-775-3541 • World Wide Web: www.zum.com
In Canada: ZURN INDUSTRIES LIMITED • 3544 Nashua Drive • Mississauga, Ontario L4V1L2 • Phone: 905-405-8272 Fax: 905-405-1292
AquaSens0 is a registered trademark of Zurn Industries, Inc.
Rev. D
Dwg. No. 65380
Date: 1/26/04
Product No. ZR6000AV
WC WATER CLOSET
ZURN
Z5950
Commercial Heavy Duty
Toilet Seat
TAG
Z5950 Series
Z5950 Series
• Injection molded for rugged,
heavy duty use.
• Highly resistant to cleansers and
strong chemicals
• Stainless steel check hinge
• Integrally molded bumpers for
lasting durability
Architectural/Engineering Approval
These dimensions and specifications are subject to change without
notice.
Fixture dimensions meet ANSI/ASME standard A112.19.2 and
CAN/CSA B45 requirements.
Select your seat and check all options that apply
E
gineering Specification:
5955SS-EL Elongated, standard white, open front toilet
seat, less cover, with stainless steel check hinge.
0 -AM Anti -microbial protection
0 -AMFR Anti-microbial/Fire Retardant
0 -BK Black
0 -STS Self-sustaining stainless steel check hinge
0 Z5956SS-EL Elongated, extra heavy duty, premium white,
open front toilet seat, less cover, with stainless steel
check hinge.
0 -ADA 2" Lift
0 -AM Anti -microbial protection
0 -BK Black
0 -STS Self-sustaining stainless steel check hinge
0 Z5957SS White, open front toilet seat, with cover and
stainless steel check hinge.
0 -AM Anti -microbial protection
0 -AMFR Anti-microbial/Fire Retardant
0 -BK Black
0 -EL Elongated
0 -RD Round
0 -STS Self-sustaining stainless steel check hinge
0 Z5958SS White, closed front toilet seat, with cover and
stainless steel check hinge.
D -AMFR Anti-microbial/Fire Retardant
0 -EL Elongated
0 -RD Round
0 -STS Self-sustaining stainless steel check hinge
0 Z5959SS-JUV White, open front child's toilet seat, less
cover, with stainless steel check hinge.
See Zurn One Systems for suggested packages.
ZURN INDUSTRIES. LLC. • COMMERCIAL BRASS OPERATION • 5900 EL WIN BUCHANAN DRIVE • SANFORD NC 27330
Phone: 1-800-997-3876 • Fax: 919-775-3541 • www.zum.com
In Canada: ZURN INDUSTRIES LIMITED • 3544 Nashua Drive • Mississauga, Ontario L4V1L2 • Phone: 905-405-8272 Fax: 905-405-1292
Rev. D
Dwg. No. 80642
Date: 1/28/13
Product No. Z5950
PnnPD PON
c:7 I
PLAN REVIEW/ROUTING SLIP
PERMIT NUMBER: PG19-0159
PROJECT NAME: COSTCO
SITE ADDRESS: 400 COSTCO DR. #150
X Original Plan Submittal
Response to Correction Letter #
Revision At
DATE: 10/18/2019
Revision #
before Permit Issued
after Permit Issued
DEPARTMENTS;
KNVO \D 1/4
Building Division
Public Works
Fire Prevention
Structural
Planning Division
Permit Coordinator
Li
•
PRELIMINARY REVIEW:
Not Applicable
(no approval/review required)
REVIEWER'S INITIALS:
DATE: 10/22/19
Structural Review Required
DATE:
APPROVALS OR CORRECTIONS:
Approved
Corrections Required
(corrections entered in Reviews)
Approved with Conditions
Denied
(ie: Zoning Issues)
DUE DATE: 11/19/2019
E
Notation:
REVIEWER'S INITIALS:
DATE:
Permit Center Use Only
CORRECTION LETTER MAILED:
Departments issued corrections:
Bldg 0 Fire
Ping 0 PW 0 Staff Initials:
12/18/2013
BUSINESS LICENSE
WASHINGTON
Limited Liability Company
PLUMBING PRO'S L.LC.
1219 274TH AVE E
BUCKLEY, WA 98321-9366
UNEMPLOYMENT :INSURANCE -ACTIVE INDUSTRIAL INSURANCE -ACTIVE
MINOR WORK PERMIT (EXPIRES 6/30/2020) - ACTIVE TAX REGISTRATION -ACTIVE
\.„
L.
PUYALLUP GENERAL.BUSINESS - NON-RESIDENT 42007657 - ACTIVE
YELM GENERAL BUSINESS - NON-RESIDENT#10569 -ACTIVE
BELLINGHAM GENERAL BUSINESS 4039473 - ACTIVE
BUCKLEY GENERAL -BUSINESS -NON4RES4DENT #1745 - ACTIVE
COVINGTON GENERAL BUSINESS - NON-RESIDENT - ACTIVE
EN UNICLAW GENERAL BUSINESS - NON-RESIDENT #CUST00004726 -ACTIVE
'GIG i-IARBOR GENERAL BUSINESS - NON-RESIDENT (EXPIRES N31,12020) - ACTIVE
ISSAQUAH GENERAL BUSINESS - NON-RESIDENT - ACTIVE
LACEY GENERAL BUSINESS - NON-RESIDENT #20562 - ACTIVE
MARYSVILLE GENERAL BUSINESS- NON-RESIDENT #5334CON218' (EXPIRES 9/30/2019) - ACTIVE
OLYMPIA GENERAL BUSINESS - NON-RESIDENT #22896 - ACTIVE
SUMNER GENERAL BUSINESS - NON-RESIDENT (EXPIRES 3/31/2020) - ACTIVE
WOODINVILLE GENERAL BUSINESS- NON-RESIDENT - ACTIVE
TUKWILA GENERAL BUSINESS - NON-RESIDENT (EXPIRES 4/30/2020 - ACTIVE
Issue Date: Sep 06, 2019
Unified Business ID #: 602659236
Business ID.#: 001
Location: 0001
Expires: Oct 31, 2019
DUTIES OF MINORS:
Ages 16-17: SHOP DUTIES, SWEEP, CLEAN, WASH TRUCKS, ORGANIZE
Ages 14-15: Sweep, clean, wash trucks, move materials, organize, paint
LICENSING RESTRICTIONS:
It is the business's responsibility to comply with minor work permit requirements_ See WAC 296-125-030 and WAC
296-125-033 for Non -Agricultural and WAC 296-131-125 for Agricultural guidelines and restricted act4ities.
This document lists the registrations, endorsements, and licenses authorized for the business
'II named above. By accepting this document, the licensee certifies the information on the application
s-s was complete, true, and accurate to the best of his or her knowledge, and that business will be
4, conducted in comphance with all appticable Washington state, county, and, city regulations.
e
P
•
UBI: 602659236 001 0001
0,
S'TATE+
INASHINGTON
Expires: Oct 31, 2019
3LUMBING PRO'S L.L.C.
12119 274TH AVE E
3UCKLEY, WA 98321-9366
UNEMPLOYMENT INSURANCE -
ACTIVE
INDUSTRIAL INSURANCE -ACTIVE
MINOR WORK PE.RMIT (EiPTRES
613012020) - ACTIVE
TA.' RPCUSTRATICIN Ar.-rivp
PLUMB NG PRO'S LLC
Page 1 of 2
Hoitw Espahol Contact,
Safety & Health Claims & Insurance
Washington State Department of
Labor & Industries
Search L I
L
A-Z Index Help My 1.4f
Workplace Rights Trade:, & Licensing
PLUMBING PRO'S LLC
Owner or tradesperson
Principals
BRANCH, VIRGINIA LEE, PARTNER/MEMBER
BRANCH, WILLIAM A, PARTNER/MEMBER
BRANCH, WILLIAM, AGENT
Doingibusiness as
PLUIVBING PRO'S LLC
WA UBI No.
602 659 236
PO BOX 188
BUCKLEY, WA 98321-0188
360-829-6539
PIERCE County
Business type
Limited Liability Company
Governing persons
VIRGINIA
LEE
BRANCH
WILLIAM A BRANCH;
License
Verify the contractor's active registration / license I certification (depending on trade) and any past violations.
Construction Contractor Active
Meets current requirements.
License specialties
PLUMBING
License no.
PLUMBPL947PL
Effective — expiration
10/13/2006-10/13/2020
Bond
CBIC
Bond account no.
SG9T57
$6,000.00
Received by L&I Effective date
10/1V2006 10/12/2006
Expiration date
Until Canceled
Insurance
WESTERN NATIONAL MUTUAL INS $1,000,000.00
Policy no.
CPP1201255
Received by L&I Effective date
11/26/2018 12/02/2018
Expiration date
12/02/2019
insurance history
Savings
No savings accounts during the previous 6 year period.
Help us improve
haps://secure.lni.wa.gov/verify/Detail.aspx?UBI-602659236&LIC=PLUMBPL947PL&SAW= 10/24/2019