HomeMy WebLinkAboutPermit D07-430 - CASTLE MEGA STORE - REROOFCASTLE MEGA STORE
405 EVANS BLACK RD
D07 -430
Parcel No.: 0223100036
Address: 405 EVANS BLACK DR TUKW
Suite No:
Tenant:
Name: CASTLE MEGA STORE
Address: 405 EVANS BLACK RD , TUKWILA WA
Contact Person:
Name: BILL NEISINGER
Address: P 0 BOX 82894 , KENMORE WA 98028
Phone: 206 -364 -4445
Contractor:
Name: ASSOCIATED ROOFING INC
Address: PO BOX 82894 , KENMORE, WA 98028
Phone:
Contractor License No: ASSOCRI16206
Value of Construction:
Type of Fire Protection:
Type of Construction:
doc: IBC -10/06
Cityf Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206 -431 -3670
Fax: 206 - 431 -3665
Web site: http: / /www.ci.tukwila.wa.us
Owner:
Name: BANK OF AMERICA
Address: WA1- 501 -15-08 , PO BOX 34029/LEEDE 98124
Phone:
DESCRIPTION OF WORK:
REMOVE EXISTING 2 LAYERS OF BUILT UP ROOFING SYSTEM TO THE PLYWOOD DECKING. INSTALL 1/2" PERLITE
COVERBOARD, THEN POLYGLAS 2 PLY GRANULAR TORCH DOWN ROOF SYSTEM. SCUPPERS AND COLLECTORS TO BE
REPLACED.
$66,700.00
DEVELOPMENT PERMIT
* *continued on next page **
Permit Number: D07 - 430
Issue Date: 12/11/2007
Permit Expires On: 06/08/2008
Expiration Date: 05/06/2008
Fees Collected: $1,564.64
International Building Code Edition: 2006
Occupancy per IBC: 0019
D07 -430 Printed: 12 -11 -2007
Public Works Activities:
Channelization / Striping: N
Curb Cut / Access / Sidewalk / CSS: N
City aTukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206 -431 -3670
Fax: 206 -431 -3665
Web site: http: / /www.ci.tukwila.wa.us
Fire Loop Hydrant: N Number: 0 Size (Inches): 0
Flood Control Zone:
Hauling: N Start Time: End Time:
Land Altering: Volumes: Cut 0 c.y. Fill 0 c.y.
Landscape Irrigation:
Moving Oversize Load: Start Time: End Time:
Sanitary Side Sewer:
Sewer Main Extension: Private: Public:
Storm Drainage:
Street Use: Profit: N Non - Profit: N
Water Main Extension: Private: Public:
Water Meter:
Permit Center Authorized Signature:
Signature:
Print Name:
doc: IBC -10/06
N
I hereby certify that I have read and examined this permit and know the same to be true and correct. All provisions of law and ordinances
governing this work will be complied with, whether specified herein or not.
The granting of this permit does not presume to give authority to violate or cancel the provisions of any other state or local laws regulating
construction or the performance of wor ,j I am authorized to sign and obtain this development p rmit.
Date: t2 ti 1 Z
Permit Number: D07 -430
Issue Date: 12/11/2007
Permit Expires On: 06/08/2008
iJ Date: t l
This permit shall become null and void if the work is not commenced within 180 days from the date of issuance, or if the work is suspended
or abandoned for a period of 180 days from the last inspection.
D07 -430 Printed: 12 -11 -2007
Parcel No.: 0223100036
Address:
Suite No:
Tenant:
405 EVANS BLACK DR TUKW
CASTLE MEGA STORE
1: ** *BUILDING DEPARTMENT CONDITIONS * **
City of Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206 - 431 -3670
Fax: 206 - 431 -3665
Web site: http: / /www.ci.tukwila.wa.us
PERMIT CONDITIONS
Permit Number:
Status:
Applied Date:
Issue Date:
D07 -430
ISSUED
11/26/2007
12/11/2007
2: No changes shall be made to the approved plans unless approved by the design professional in responsible charge and the
Building Official.
3: All mechanical work shall be inspected and approved under a separate permit issued by the City of Tukwila Permit Center
(206/431 - 3670).
4: All permits, inspection records, and approved plans shall be at the job site and available to the inspectors prior to
start of any construction. These documents shall be maintained and made available until final inspection approval is
granted.
5: All construction shall be done in conformance with the approved plans and the requirements of the International
Building Code or International Residential Code, International Mechanical Code, Washington State Energy Code.
6: Prior to fmal inspection a written statement from the roofmg contractor shall be required. The statement shall
confirm the fire classification of the roof assembly that was installed.
7: There shall be no occupancy of a building until final inspection has been completed and approved by Tukwila building
inspector. No exception.
8: Manufacturers installation instructions shall be available on the job site at the time of inspection.
9: Remove all demolition rubble and loose miscellaneous material from lot or parcel of ground, properly cap the sanitary
sewer connections, and properly fill or otherwise protect all basements, cellars, septic tanks, wells, and other
excavations. Final inspection approval will be determined by the building inspector based on satisfactory completion of
this requirement.
10: All construction noise to be in compliance with Chapter 8.22 of the City of Tukwila Municipal Code. A copy can be
obtained at City Hall in the office of the City Clerk.
11: All plumbing and gas piping work shall be inspected and approved under a separate permit issued by the Cityof Tukwila
Permit Center.
12: All electrical work shall be inspected and approved under a separate permit issued by the City of Tukwila Building
Department (206 - 431- 3670).
13: VALIDITY OF PERMIT: The issuance or granting of a permit shall not be construed to be a permit for, or an approval of,
any violation of any of the provisions of the building code or of any other ordinances of the City of Tukwila. Permits
presuming to give authority to violate or cancel the provisions of the code or other ordinances of the City of Tukwila
shall not be valid. The issuance of a permit based on construction documents and other data shall not prevent the
Building Official from requiring the correction of errors in the construction documents and other data.
14: ** *FIRE DEPARTMENT CONDITIONS * **
15: The attached set of building plans have been reviewed by the Fire Prevention Bureau and are acceptable with the
doc: Cond -10/06 D07 -430 Printed: 12 -11 -2007
City of Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206 -431 -3670
Fax: 206 -431 -3665
Web site: http: / /www.ci.tukwila.wa.us
following concerns:
16: Application of roof coverings with the use of an open -flame devices requires a separate permit from the Tukwila Fire
Department located at 444 Andover Park East, Tukwila, Washington, 98188; telephone - (206)575 -4407. There shall be not
less than one multi- purpose portable fire extinguisher with a minimum 3 -A 40 -B:C rating on the roof being covered or
repaired. (IFC 105.6.24, 1417.3)
17: Any overlooked hazardous condition and/or violation of the adopted Fire or Building Codes does not imply approval of
such condition or violation.
18: These plans were reviewed by Inspector 511. If you have any questions, please call Tukwila Fire Prevention Bureau at
(206)575 -4407.
* *continued on next page **
doc: Cond -10/06 D07 -430 Printed: 12 -11 -2007
City of Tukwila
Department of Community Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206 - 431 -3670
Fax: 206 -431 -3665
Web site: http: / /www.ci.tukwila.wa.us
I hereby certify that I have read these conditions and will comply with them as outlined. All provisions of law and
this work will be complied with, whether specified herein or not.
The granting of this permit does not presume to give authority to violate or cancel the provision of any other work
construction or the performance of work.
Signature: ► - , Date: V ( I 1
ordinances governing
or local laws regulating
doc: Cond -10/06 007 -430 Printed: 12 -11 -2007
SITE LOCATION
r King Co Assessor's Tax No.: 0223 l OCO 3(0
Os 543INS 13lc�c,IL dc( Suite Number: Floor:
Tenant Name: Cal ti C. e la.. Ors (New Tenant: ❑ Yes ❑ ..No
Property Owners Name: C 5 `, T tE Le % (. - ' do 13 4r tt OT k WI. c' ■C,
Mailing Address: 1 C) (3, 3 Ivo dzi 0 t c wfrc ° tt l a- `t
City State Zip
Site Address:
CITY OF TUKWIL
Community Development Department
Public Works Department
Permit Center
6300 Southcenter Blvd., Suite 100
Tukwila, WA 98188
http://www.ci.tukwila.wa.us
Applications and plans must be complete in order to be accepted for plan review.
Applications will not be accepted through the mail or by fax.
* *Please Print **
CONTACT PERSON - who do we contact when your permit is ready to be issued
Name: 1 5 ill 30 i tti
Mailing Address: 1� •D• a 0"= 41 4
g fl
E -Mail Address: W ((Y 0:53VCI rooCn j l, v,. Cow,.
GENERAL CONTRACTOR INFORMATION —
(Contractor Information for Mechanical (pg 4) for Plumbing and Gas Piping (pg 5))
Company Name: ik SSOCLA t KCO N
i C..,
Mailing Address: r e , 0 - to' Via+ � n vl/►z2fe f Wit t
II Ni City State 4 ����
Contact Person: a1 R 1 V € t'0 1 A 0 Day Telephone: 36
E -Mail Address: Sd1Mi; Q$ Fax Number: 0 3615 a'3O 3
Expiration Date: 0 ID& b r'
Company Name:
Mailing Address:
QWpptiationsWonns- Applications Ca Lme13 -2006 - Permit Applicadon.doc
Revised: 9-2006
bit
Contractor Registration Number: Al %IV alb
City
Contact Person: Day Telephone:
E -Mail Address: Fax Number:
E -Mail Address:
ARCHITECT OF RECORD - All plans must be wet stamped by Architect of Record
N /A
L..r
Building Permit No. DO7- -9 . c)
Mechanical Permit No.
Plumbing/Gas Permit No.
Public Works Permit No.
Project No.
(For office use only)
Day Telephone: cO6 3(c1 4 4 445
Ken rvlore , wh of eaa-s
City State Zip
Fax Number: 2042 303
State
Zip
City
Contact Person: Day Telephone:
Fax Number:
Company Name: /
Mailing Address: 1�
State
Zip
Page 1 of 6
ENGINEER OF RECORD - All plans must be wet stamped by Engineer of Record
BUILDING PERMIT INFORM rION — 206- 431 -3670
Valuation of Project (contractor's bid price): $ 110
Existing Building Valuation: $
Scope of Work (please pro I.de detailed information): cii\ec
l eet t f ee dtk a
Will there be new rack storage? ❑ Yes . No If yes, a separate permit and plan submittal will be required.
Provide All Building Areas in Square Footage Below
PLANNING DIVISION:
Single family building footprint (area of the foundation of all structures, plus any decks over 18 inches and overhangs greater than 18 inches)
For an Accessory dwelling, provide the following:
Lot Area (sq ft): Floor area of principal dwelling: Floor area of accessory dwelling:
*Provide documentation that shows that the principal owner lives in one of the dwellings as his or her primary residence.
Number of Parking Stalls Provided: Standard: Compact: Handicap:
Will there be a change in use? ❑ Yes ❑ No If "yes", explain:
FIRE PROTECTION/HAZARDOUS MATERIALS:
❑ Sprinklers ❑ Automatic Fire Alarm ❑ None ❑ Other (specify)
Will there be storage or use of flammable, combustible or hazardous materials in the building? ❑ Yes ❑ No
If "yes', attach list of materials and storage locations on a separate 8 -1/2" x 11" paper including quantities and Material Safety Data Sheets.
SEPTIC SYSTEM
❑ On -site Septic System — For on -site septic system, provide 2 copies of a current septic design approved by King County Health
Department.
Q\Applications\Forms- Applications On Line\3 -2006 - Permit Application.doc
Revised: 9-2006
m
Page 2 of 6
Existing
Interior Remodel
Addition to
Existing
Structure
New
Type of
Construction per
IBC el
Type of
Occupancy per
IBC
1 Floor
15135
ce f o0
2nd Floor
3" Floor
Floors thru
Basement
Accessory Structure'
Attached Garage
Detached Garage
Attached Carport
Detached Carport
Covered Deck
Uncovered Deck
BUILDING PERMIT INFORM rION — 206- 431 -3670
Valuation of Project (contractor's bid price): $ 110
Existing Building Valuation: $
Scope of Work (please pro I.de detailed information): cii\ec
l eet t f ee dtk a
Will there be new rack storage? ❑ Yes . No If yes, a separate permit and plan submittal will be required.
Provide All Building Areas in Square Footage Below
PLANNING DIVISION:
Single family building footprint (area of the foundation of all structures, plus any decks over 18 inches and overhangs greater than 18 inches)
For an Accessory dwelling, provide the following:
Lot Area (sq ft): Floor area of principal dwelling: Floor area of accessory dwelling:
*Provide documentation that shows that the principal owner lives in one of the dwellings as his or her primary residence.
Number of Parking Stalls Provided: Standard: Compact: Handicap:
Will there be a change in use? ❑ Yes ❑ No If "yes", explain:
FIRE PROTECTION/HAZARDOUS MATERIALS:
❑ Sprinklers ❑ Automatic Fire Alarm ❑ None ❑ Other (specify)
Will there be storage or use of flammable, combustible or hazardous materials in the building? ❑ Yes ❑ No
If "yes', attach list of materials and storage locations on a separate 8 -1/2" x 11" paper including quantities and Material Safety Data Sheets.
SEPTIC SYSTEM
❑ On -site Septic System — For on -site septic system, provide 2 copies of a current septic design approved by King County Health
Department.
Q\Applications\Forms- Applications On Line\3 -2006 - Permit Application.doc
Revised: 9-2006
m
Page 2 of 6
PERMIT APPLICATION NOTES — Applicable to all permits in this application
Value of Construction —In all cases, a value of construction amount should be entered by the applicant. This figure will be reviewed and is subject
to possible revision by the Permit Center to comply with current fee schedules.
Expiration of Plan Review — Applications for which no permit is issued within 180 days following the date of application shall expire by limitation.
Building and Mechanical Permit
The Building Official may grant one or more extensions of time for additional periods not exceeding 90 days each. The extension shall be
requested in writing and justifiable cause demonstrated. Section 105.3.2 International Building Code (current edition).
Plumbing Permit
The Building Official may grant one extension of time for an additional period not exceeding 180 days. The extension shall be requested
in writing and justifiable cause demonstrated. Section 103.4.3 Uniform Plumbing Code (current edition).
I HEREBY CERTIFY THAT I HAVE READ AND EXAMINED THIS APPLICATION AND KNOW THE SAME TO BE TRUE UNDER
PENALTY OF PERJURY BY THE LAWS OF THE STATE OF WASHINGTON, AND I AM AUTHORIZED TO APPLY FOR THIS PERMIT.
BUILDING OWNER OR AUTHORIZED AGENT:
Signature: 1� ► f i�V\ A te `
Print Name: N a Aci 'vim 'S
Date: t' - l ° t • O 7"
Day Telephone: R46 864 44-.0k5
Mailing Address: P' V' 130) $ 1<eh rare t w1# avoe-4'
City State
Date Application Expires:
)( e _0 v
Date Application Accepted:
QUpplications\Forms- Applications On Line3-2006 - Permit Application.doc
Revised: 9 -2006
bh
Staff Initials:
Zip
Page 6 of 6
Parcel No.: 0223100036
Address: 405 EVANS BLACK DR TUKW
Suite No:
Applicant: CASTLE MEGA STORE
Receipt No.: R07 -02569
Payee: ASSOCIATED ROOFING
ACCOUNT ITEM LIST:
Description
BUILDING - NONRES
PLAN CHECK - NONRES
STATE BUILDING SURCHARGE
City of Tukwila
Department of Communit Development
6300 Southcenter Boulevard, Suite #100
Tukwila, Washington 98188
Phone: 206 -431 -3670
Fax: 206 -431 -3665
Web site: http: / /www.ci.tukwila.wa.us
000/322.100
000/345.830
000/386.904
RECEIPT
Permit Number: D07 -430
Status: PENDING
Applied Date: 11/26/2007
Issue Date:
Payment Amount: $1,564.64
Initials: WER Payment Date: 11/26/2007 11:12 AM
User ID: 1655 Balance: $0.00
TRANSACTION LIST:
Type Method Description Amount
Payment Check 83841 1,564.64
Account Code Current Pmts
945.54
614.60
4.50
Total: $1,564.64
5338 11/26 9710 TOTAL 1564.64
doc: Receipt -06 Printed: 11 -26 -2007
Project:
C 45 7 7 64S?)
Type of lupection:
/- " /
NJ
Addrgss:
405 F/1/1/S
Date Called:
Special Instructions:
Date Wanted
—? /-1.0,0_,
1
Requester:
Phone No:
06 344 WV5
Approved per applicable codes. El Corrections required prior to approval.
COMMENTS:
ii/evieks e#0 gervoi,del
erni, kip
r eceipt No.:
'Date:
INSPECTION RECORD
Retain a copy with permit 607-v36
INSPECTION NO. PERMIT NO. r i
CITY OF TUKWILA BUILDING DIVISION k r--
6300 Southcenter Blvd., #100, Tukwila, WA 98188 (206)431-6)0
IDYL
.00 REINSPECTION FEE EQUIREDK Prior to inspection, fee must be
aid at 6300 Southcehter Blvd., Suite 100. Call the schedule reinspection.
Project:
L j\
Sprinklers:
Fire Alarm:
Type of Inspection:
' rJ.4 t
Address: LI j
Suite #:
e
f 1,n( t
Contact Person:
Special Instructions:
Phone No.:
)‘).- S (o -67(z_
Needs Shift Inspection:
Sprinklers:
Fire Alarm:
Hood & Duct:
Monitor:
Pre -Fire:
Permits:
Occupancy Type:
INSPECTION NUMBER
INSPECTION RECORD
Retain a copy with permit
CITY OF TUKWILA FIRE DEPARTMENT
Dc 1— Li 30
PERMIT NUMBERS
444 Andover Park East, Tukwila, Wa. 98188 206 -575-
LA Approved per applicable codes.
1 - 7 Corrections required prior to approval.
COMMENTS:
aL U
Inspector: 9- 5 i y
Date: 31,6/0
Hrs.: `
(}I J $80.00 REINSPECTION FEE REQUIRED. You will receive an invoice from
the City of Tukwila Finance Department. Call to schedule a reinspection.
Word /Inspection Record Form.Doc 1/13/06
T.F.D. Form F.P. 113
Project: I
�A (� ! 1 S
Type lnspection:
v
Address:
Date Called:
Special Instructions:
Date W ed:
3 - I Z
i a ms
p.m.
Requester:
Phone No:
512 4/
(0 e l 15
Dot/ -13
INSPECTION RECORD
Retain a copy with permit
INSPECTI • N NO. PERMIT NO.
CITY OF TUKWILA BUILDING DIVISION r-
6300 Southcenter Blvd., #100, Tukwila, WA 98188 (206)431 -3
pproved per applicable codes. Corrections required prior to approval.
COMMENTS:
h v - e_dt 1.4 A
I
1 €
I!i4
i aUl
lnspegfor:
tk,-k ( v4
0 $58.00 REINSPECTION FEE EQUIRED. Prior to inspection, fee must be
paid at 6300 Southcenter Blvd.. Suite 100. Call the schedule reinspection.
'Receipt No.:
'Date:
COMMENTS:
/ .S,e91 / GAS it/ or i%/!fli /C/�
- j),4 i t/ Ow e'75 //o9 /97
Address:
, 5
3 _ -..>Ye( y�. br/ ,714•/ i--eie-vti /2
Date Called:
I '- ( ,,)t7 / Abt -Do-D
Special Instructions:
/.I dq/
9',41 rfri
Date Want d: --'
/ /2`)/.m
Requester:
Phone No:
,..----
Project:
!f /d '7164 5T0Y
Type of Inspection:
r7 A r I /
Address:
, 5
Mete 402
Date Called:
Special Instructions:
/.I dq/
9',41 rfri
Date Want d: --'
/ /2`)/.m
Requester:
Phone No:
� ._
INSPECTION RECORD
Retain a copy with permit
INSPECTION NO. PERMIT NO. 7/
CITY OF TUKWILA BUILDING DIVISION
6300 Southcenter Blvd., #100, Tukwila, WA 98188 (206)431 -367
Approved per applicable codes. Corrections required prior to approval.
$ .00 REINSPECTION FEE RE f U=RED. rior to inspection, fee must be
paid at 6300 Southcenter Blvd.. Suite O. Call the schedule reinspection.
'Receipt No.:
P ec : C �+
_
Type of Ins ection:
(�
:30 (�
Address: f
Ol
n
e e
ate
Date Called:
Special Instructions:
Date Wanted:
( 2
7
m -
m
Requester:
Phone N
I 4 INSPECTION RECORD
( " Retain a copy with permit
INSPECTION NO. PERMIT NO.
CITY OF TUKWILA BUILDING DIVISION 10.--
6300 Southcenter Blvd., #100, Tukwila, WA 98188 (206)43 1 -367
p i _ Approved per applicable codes. ❑ Corrections required prior to approval.
COMMENTS:
�'�✓ E'er . C°
143 /9
'r Date:
$ 4i REINSPECTION FEE R UIRED. Pri r to inspection, fee must be
pa • - t 6300 Southcenter Blvd., Suite 100. tl the schedule reinspection.
'Receipt No.:
'Date:
Map of 406 Evans Black Dr Tukwila, WA by MapQuest
Sorry! When printing directly from the browser your map may be incorrectly cropped. To print the
entire map, try clicking the "Printer- Friendly" link at the top of your results page.
An AOL Carnra.,y.
* 406 Evans Black Dr
Tukwila, WA 98188 -2911, US
Sorry! When printing directly from the browser your map may be incorrectly cropped. To print the
entire map, try clicking the "Printer - Friendly" link at the top of your results page.
710
!lam Evanssalackldr
w�lasP.kw1
•
�,�AAAPQ�IEST,
All right erved. Use Subject to License /Copyright
This map is informational only. No representation Is made or warranty given as to its content. User assumes all risk of use. MapQuest and
Its suppliers assume no responsibility for any loss or delay resulting from such use.
Doi - 1 I 3O
Page 1 of 1
RECEIVED
Nov 2,6 2007
PERMIT CENTET,
http: / /www.mapquest.com/maps /map.adp ?searchtype= address &country= US &addtohistor... 11/23/2007
Customer:
Job Name:
ASSOCIATED ROOFING, INC.
40 b cr - BALK , tae-
Subject: STM. TL/
II MIL.
EMI"
1
u
wftho
B
J
re a new
al plan r
U.?
ME III
111MIEM
'S
Idi g pier • f i .
Pl.; _bn itta! l■
•
IEV]EWEO FO
o
II
PRO D
; __DEC _- 7 - -21
tl
e�
Of Tu
N.�
I
IMEEM
Nn nips -
�� � _.. _.. IS OM 11111111ffill 111 111111111111111111111
of Oro
arm ma
equ
ludeadbiii t
Date
Prepared By: UtP4
Page: I of
• ASSOCIATED ROOFING, INC.
Customer: Date "' c )1 ' .61/
Job Name: 4'0Lo kvf "ELM") 's\ J Prepared By: W V\
Subject: U�T�V FIL COPY Page: I of V I
I ; , . -T-P --rerjrifi-- I; t i ii ___ i 4 I i i„,.....„..,-.-,ar-,■' '
. ,,,-,,-./.. , .c..
- r wa. tEAN-v-114
Two ../1.,
; i. . . ......... z
'mot s .";: : :_R:pe) . *71 NI G „
}
r - _( is # �: _ _
,
' I i I
:
•' _ 1 tJS U ;(50:h PLI W azra
•'E LAri .... ' o i ..� G v-- �-? -e . k- P PL1
• pi,' ; \)1L(.! 8G 1N §TA O\}t T�
1 ■\'' (Ai-4 c4-x l4444LWIe' o -s S l"m`�C. Art c
� "�1�1:6��•._ _` tJ [ la,. 3 .
I i
t i SST 1 M� rL T -L4 ! N
ECE1VED
NOV 26 2007
PERMIT CENTER
- R E Oil-- 1,560
Associated Roofing, Inc. PROPOSAL AND CONTRACT
ASSOCRI 16206 p • ! i
P.O. Box 82894 This is a "plain- English" contract. "We," "us," and "our" means
Kenmore, Washington 9802 w . _ 1 A ssociated Roofing, Inc. "You" means the customer.
206 364 -4445 • 800 358 -3 p w '$ �' • t ' a � "�� )
CODE COMPLIANCE Date: April 12, 2007 Page 1 of 2
Proposal Submitted To: APPROVED
John Margeson 206- 358 -8918
Bank of America DEC - 7 20
P.O. Box 34029
Seattle, WA. 98124 CI Of Tukwila
B ILDING DIVISION
Job Name and Location:
30
Castle Megastore C
ED
406 Evans Black Drive RECEIVED
Tukwila, WA NOV 26 2001
►. File Code: PERMIT CENTEt,
A80 +54/1 &2/TR -bng
PROPOSAL: \XWe are pleased to submit this proposal to furnish the materials
INSTALL PLYGLASS "POLYFLEX -G" (4.5mm), OR EQUAL,
SCOPE OF THE WORK: The specific scope of the work for rhis project is:
1. Remove edge metal and haul away for disposal.
2. Tear off the existing roof coverings down to the wood substrate.
removed to best suitable surface Set all protruding fasteners
the substrate will be inspected for structural soundness. It is
available during the demolition and removal. This is necessary
the weather. Roof deck and structural repairs will be &'bade and
15 %] basis. Plywood replacement will be invoiced as follows:
foot, and 3/4 inch @ $2.75 /square foot. Plywood replacement
3. Furnish and install W' perlite cover board or' " Primed Dens
4. Install 3Ib lead pipe fleshings on plumbing soil vent pipes and
5. Install one ply 28Ib fiberglass base sheet and mechanically fasten
6. Install a Polyglass "Polyflex -G" 4.5mm APP 160 granular surface
200W- APP -TOR. This is a torchgrade membrane with a manufacturer's
Prorated labor material warranty.
7. All curbs, cants, sharp angles, and pipe fleshings will have additional
specifications, to included multiple -ply Polyglass membrane
8. Install new 24 gauge sheet metal perimeter flashing with baked
gasketed screws.
9. Clean up and remove all debris from contracted work.
OTHER ITEMS INCLUDED IN SCOPE OF WORK
A. Provide and install three (3) galvanized sheet metal tall
B. Raise mechanical units, install specified roof system,
timbers; reset existing timbers and /or replace unserviceable
mechanical units.
C. Remove clamping ring from existing internal roof drain.
and /or mounting hardware. If it is unserviceable, it will
D. Provide and install Three (3) inch edge scuppers. Reconnect
E. Remove large marble Crete approx 1' up wall above
F. Install 90' feet 24 gauge surface mount reglet flashing
THE FOLLOWING PLANS, SPECIFICATIONS. AND QUALIFICATIONS ARE
CONTINUES ON PAGE TWO
and perform the labor to:
GRANULAR SURFACE MODIFIED ROOF SYSTEM
FILE COPY
If roofing material is mopped solidly to substrate, it will be
and sweep clean ary. During the roof removal,
'o��
understood that t l c preeed ,., *ct sLduve will oe
to avoid any delay while the roof is uncovered and exposed to
invoiced'an a time [$55.00/per man- hot.trIanal t leapt' 5't'� Ol7las
3/8 inch —1/2 itch @ $1.75 /square foot,` 5/8 inch @ $2.00/square -.-=$
rates include labor, material, cartage, and disposal fees.
-Deck.
multiple -ply Polyglass membrane stripping.
with simplex stronghold nails. .
modified bitumen roof system per manufacturer's specification
ten (10) year limited No Dollar Limit (NDL), Non -
Polyglass flashing materials, installed per manufacturer's
stripping.
enamel finish using gasketed galvanized nails or hex head
'` - - r -p j t.tu€ , ,EA-
cone vent with cap.
loose lay an additional layer of cap sheet under unit support
timbers with pressure treated wood, and reset
Install roof membrane and flashing. Reinstall clamping ring
be removed and replaced as work additional to contract.
existing downspouts.
office /lower roof.
with caulk joint. At area where marble Crete was removed.
A PART OF THIS SCOPE OF WORK:
Dollars $
Terms and Conditions Listed On Reverse Side PLUS SALES TAX
WARRANTIES: Our warranty for workmanship, as described on the reverse
The manufacturer's warranty, which is described in their warranty which will
AUTHORIZED.
side, is for years.
be provided to you, is for years.
SIGNATURE:
Associated Roofing, Inc. Associated Roofing. Inc.
CUSTOMER ACCEPTANCE OF PROPOSAL
This prov'sat is accepted. The scope of work, pr' e, terms and conditions contained on the front and re erne of this document constitute the contract
•ws� ec l--itviE.t.tcr• i.l.A., ws - Tv:�s.
t te a.-- - e- TITLE V /C.E. - 1� , i ' DATE i `U - '
SIGNATURE'_ ? nr
m
RETURN' ORIGINAL OF THIS PROPOSAL TO: P.O. BOX 82894, KENMORE, WASHINGTON 98028
= Associated Roofing, Inc.
ASSOCRI I620G PROPOSAL AND CONTRACT
P.O. Box 82894 This is a "plain- English" contract. "We," "us," and "our" means
Kenmore, 'Washington 98028 Associated Roofing, Inc. "You" means the customer.
206 364 -4445 • 800 358 -3119 • 206 368 -2303 (Fax)
Date: April 12, 2007 Page 2 of 2
Proposal Submitted To:
John Margeson 206 - 358 -8918
Bank of America
P.O. Box 34029
Seattle, WA. 98124
Job Name and Location:
Castle Megastore
406 Evans Black Drive CCr
Tukwila, WA RECE VEf
File Code: NOV 2 6 Zoo!
A80+54 /1&2/TR -brig
PERMIT GENIE_
PROPOSAL: We are pleased to submit this proposal to furnish the materials
INSTALL PLYGLASS "POLYFLEX -G" (4.5mm), OR EQUAL,
SCOPE OF THE WORK: The specific scope of the work for this project is:
EXCLUSIONS:
• Temporary disconnecting and hook -up of mechanical
work and are the responsibility of the building owner.
• Disconnect and removal of neon lighting mounted on
QUALIFICATIONS TO BID:
A. There will be dirt and debris associated with this project. If
sheetrock (ceiling) damage while replacing decking. Repair
owner. To protect important items tenants should move, cover,
tenant(s) is the responsibility of the owner or owner's representative.
consequential damages to the structure or contents.
B. As this is a construction project, there will be additional vehicle
installing a built -up roof system, there will be an asphalt odor
please be assured this smell, as far as we know, has not been
C. By acceptance of this contract, the owner or owner' s representative
the existence of any asbestos containing materials that will
D. The cost excludes all permits and fees (i.e. ,building, street/sidewalk
the owner's expense.
E. The construction industry is currently experiencing rapidly escalating
steel (sheet metal), isocyanurate insulation, and asphalt -based
isocyanurate, and some roofing products is currently subject
construction suppliers and contractors. Because of the difficulty
Roofing cannot provide firm prices for these products for future
Associated Roofing subsequent to making this proposal/contract,
increased to reflect the additional cost to Associated Roofing
increased charges. Should you have any questions, please
thirty (30) days.
PLEASE NOTE: Due to the size of this project, we are requesting
and perform the labor to:
GRANULAR SURFACE MODIFIED ROOF SYSTEM
units to facilitate this project are not included in the scope of
We will coordinate and schedule the mechanical work.
outside face of fascia metal by others.
decking repirs are necessary, there is the potential for
to such damage is the sole responsibility of the property
or secure objects to prevent damage. Notification to the
Associated Roofing is not responsible for
traffic and an increased level of noise. Also, if we are
present. Some people may find this objectionable, however,
shown to be a health hazard.
is stating to the best of their knowledge there is not
be disturbed by the performance of the specified work.
use, or fire/torch). If required, we will obtain at
prices and material availability problems relating to
roofing products. The availability and pricing of steel,
to sudden significant changes beyond the control of
in obtaining firm prices from our suppliers, Associated
projects. If there is an increase in the price charged to
the price set forth in the proposal and contract shall be
upon our submittal of written documentation of the
do not hesitate to contact us. This proposal is valid for
a downpayment of 25% 10 days prior to commencement of
A PART OF THIS SCOPE OF WORK:
Dollars S $66,700.00
-
the work.
THE FOLLOWING PLANS, SPECIFICATIONS, AND QUALIFICATIONS ARE
SIXTY SIX THOUSAND SEVEN HI INDRFD AND NO /100
Terms and Conditions Listed On Reverse Side PLUS SALES TAX
WARRANTIES: Our warranty for workmanship, as described on the reverse
The manufacturer's warranty, which is described in their warranty which will
AUTHORIZED
side, is for TWO (2) years.
be provided to you, is for TEN (10) years.
NDL
SIGNATURE:
Associated Roofing, Inc. Associated Roofing. Inc.
CUSTOMER ACCEPTANCE OF PROPOSAL
This proposal is accepred. The scope of work, price. terms and conditions contained on the front and reittse at chi document constitute the conrract.
e'ri •4 kvv- 4: w. A. ., ?-> l~-04'-.,.1`4.:_..
N.
SIGNATURE ` TITLE i'.:c • A : T DATE ..__ I
w
r
e' F i
RETURN ORIGINAL OF THIS PROPOSAL TO: P.O. BOX 82894, KENMORE, WASHINGTON 98028
40
SKERVICIFS,
628 SOUTH UNDER
SEATTLE,wA 80134
PHONE: (206) 682.3934
FAX: (206) 682 -7806
www.lss- alt.com
FKON ACCOUNT n CASH REIMBURSE
ErLOYEE NAME NO NOMBER
SUPPLIER NAME a 6socie j veg 40F/i47,
DATE ORDERED / /•• Z t — 7 d
DATE REQUIRED / / - 2.7 • c 7 1)", A/ f
P 13, as
ORDERED BY
CONTACT NAME
TAXABLE? (Y/N)
PURCHASE
QTY UM ITEM CODE DERIPTION
P. K l S &u ,4ti Lj
Sea, t't e 0,.•
O k ftl
lu 441 119.0"
/ 6 S coAffetc tt /IC e k6 PI) f Sala__ z-Sr_
• All amounts due will be paid within 7 working days of IN STORE a �3
SERVICES, INC. baying been paid by the owner. Payments will be
made less retention, if applicable.
• All change orders will require ass/Men quote unless directed to
proceed on a Td14 basis. Each change order wt6 be issued a separate
purchase order; we will require a separate invoice for each.
• For progress draw jobs, all progress draws are due on the 25th of the
month, prorated to the end of the month.
co.�Dept6 s 5 Otfrr.
Date /. ZI
Post -It* Fax Note 7671
RESALE #: 600-451 -209
WA. CONT. LIC. #INSTOSI 189JZ
SPECIAL TERMS
SHIP VIA
UNIT COST
AMOUNT UM
PO#
DATE WRITTEN
142624
//4 err
El CREDIT CARD: KEY BOA _
(REP* _)
DEPARTMENT Z.
STORE* / NAME S` // o t
WORK ORDER / JOB# - g Y/S CO a
•
TOTAL
QTY B/O
SUBTOTAL
SHIPPING NOV 26 2007
SALES TAX
TOTAL PERMIT CENTb
W7 - +130
joints:
Insulation: — "AFM WSG Board ", "AFM Type I Board ", "AFM Type II Board ", "AFM Type VIII Board ",
"AFM Type IX" or "Perform Guard ", any thickness. FILE COPY
Base Sheet: — "ELASTOFLEX SA V FR BASE ", self adhered. F h e
Ply Sheet (Optional): — "ELASTOFLEX SA V FR BASE ", *MediaO.
Membrane: — "ELASTOFLEX SA V FR ", self adhered or "ELASTOFLEX eat a ere .
53. Deck: NC Incline: • 1 Piar revim approval i3 ; c!
Insulation: — "AFM WSG Board ", "AFM Type I Boar1 M i fype II Boar
"AFM Type IX" or "Perform Guard ", any thickness.
Base Sheet: — "ELASTOFLEX SA V FR BASE ", self adhered.
Ply Sheet (Optional): — "ELASTOFLEX SA V FR BASE ", self adhered.
Membrane: — "ELASTOFLEX VG FR ", heat adhered.
54 . Deck: NC Incline: 1
ty Of Tukwila
Insulation (Optional): — Polyisocyanurate, any thickness. B ILDIN , DIVISION
Base sheet (Optional): — "ELASTOFLEX SA V BASE" self-adhered or "ELASTOBASE" (po
mechanically fastened.
Membrane: — " POLYFLEX SA P ", "ELASTOFLEX SA P ", "ELASTOFLEX SA V" self - adhered or
'POLYFLEX G ", heat fused.
Class B - Fully Adhered
1. Deck: C -15/32 Incline: 1
Base Sheet: — Johns Manville "Perma Ply IV" (Type G2).
Membrane: — "POLYALL" or "POLYRAM" (modified bitumen), heat welded.
2. Deck: C -15/32 Incline: 1/4
Base Sheet: — Two or more layers "DUFLEX" (mechanically fastened or heat fused), "ELASTOBASE ",
Type G2 GAF Building Materials "GAFGlas #75 ", Johns Manville "GLASBASE" or Celotex "Vaporbar
GB" (mechanically fastened or hot mopped in place).
Membrane: — "DUFLEX" or "DUFLEX G" (modified bitumen), heat welded.
3. Deck: C -15/32 Incline: 1/2
Barrier Board: — 1/2 in. (min) gypsum board with all joints staggered a min of 6 in. from the plywood
joints.
Insulation: — Tapered polystyrene, 4 in. max thickness.
Building Unit: — "INSULROOFING ", mechanically fastened with metal plates and insulation anchors.
Surfacing: — Gilsonite "No. 135 Fire Retardant Aluminum Coating ", applied at 1 -1/2 gal/sq.
4. Deck: C -15/32 Incline: 1/2
Insulation (Optional): — Any thickness, one or more layers UL Classified perlite, wood fiber, glass fiber,
polyisocyanurate, polyisocyanurate /composite, EPS /wood fiber, EPS /perlite or EPS /composite roof
insulation.
Base Sheet: — One or more layers Type G1 or G2.
Membrane: — One or more layers "DUPLEX ", "DUPLEX G ", " POLYFLEX G FR ", "POLYBOND ",
"POLYBOND G ", " POLYFLEX" or "POLYFLEX G" (modified bitumen), heat fused.
Surfacing: — Fields "F530 Heat Shield Aluminum Coating" or "F630 Heat Shield Fibered Aluminum
RECEIVEU
NOV 216 2007
PERMIT CENTEh
http : / /database.ul.com /cgi- bin/XYV/ template /LIS...ion= versionless &parent id= 1073993597 &sequence =1 (11 of 15) [7/31/2003 5:49:16 PM]
Coating ", 1-1/2 gal/sq or Monsey Products "Endure Aluminum Roof Coating ", "Weather Check" or
"Pro -Grade Aluminum Roof Coating ", 1 -1/2 gal/sq.
5. Deck: C -15/32 Incline: 1 -1/2
Base Sheet: — Type G2 or "ELASTOBASE ", mechanically fastened.
Ply Sheet: — "Polyglass Base ", heat fused.
Membrane: — " POLYFLEX G FR" (modified bitumen), heat fused.
6. Deck: 15/32 Incline: 1 -1/2
Insulation: — Glass fiber (15/16 in. min.), mechanically fastened.
Base Sheet: — Type G2 base or "ELASTOBASE ", hot mopped.
Membrane: — " POLYFLEX G FR" (modified bitumen), heat fused.
7 . Deck: C -15/32 Incline: 1/2
Base Sheet: — Type G2, mechanically fastened.
Membrane: — " POLYFLEX G" or "POLYBOND G ", heat fused.
8 Deck: NC Incline: 1
Insulation (Optional): — Polyisocyanurate, any thickness.
Base sheet (Optional): — "ELASTOFLEX SA V BASE" self - adhered or "ELASTOBASE" (poly /sand),
mechanically fastened.
Membrane: — " POLYFLEX SA P ", "ELASTOFLEX SA P ", "ELASTOFLEX SA V" self - adhered or
'POLYFLEX G ", heat fused.
9 . Deck: C -15/32 Incline: 1 /2
Insulation (Optional): — Polyisocyanurate, any thickness.
Barrier Board: — 1 /4 -in. (min) GP Gypsum Dens -Deck® or Dens -Deck PrimeTM, mechanically fastened.
Base sheet: — " ELASTOBASE" (poly /sand), mechanically fastened.
Ply sheet (Optional): — "ELASTOFLEX SA V BASE" , self - adhered.
Membrane: — " POLYFLEX SA P ", "ELASTOFLEX SA P ", "ELASTOFLEX SA V" self - adhered or
'POLYFLEX G ", heat fused.
10. Deck: C -15/32 Incline: 1/4
Base sheet (Optional): — " ELASTOBASE" (poly /sand), mechanically fastened.
Ply Sheet: — "ELASTOFLEX SA V BASE ", self - adhered or "ELASTOBASE ", mechanically fastened.
Membrane: — " POLYFLEX SA P ", "ELASTOFLEX SA P ", "ELASTOFLEX SA V" self - adhered or
'POLYFLEX G ", heat fused.
RECEIVE
NOV .2' 6 2007
PERMIT CENTE&-
Class C - Fully Adhered
1. Deck: C -15/32 Incline: 2
Base Sheet: — Johns Manville "Perma Ply IV" (Type G2).
Membrane: — " POLYBOND G ", " POLYFLEX G" or "POLYFLEX G FR" (modified bitumen), heat
welded.
Class A - Mechanically Fastened
1. Deck: NC Incline: 1
Insulation: — Polyisocyanurate, perlite, wood fiber or polyisocyanurate /perlite board, any thickness.
http: / /database.ul.com /cgi- bin /XYV /template /LIS...ion= versionless &parent id= 1073993597 &sequence =1 (12 of 15) [7/31/2003 5:49:16 PM]
Cap
Base Sheet
(Mechanically
Attached,
Per Specification)
Base Sheet : Polyglass G2 Base
Roofing Guide Specification For:
f
R
WATERPROOFING MATERIALS AND INSULATING SYSTEMS
Spec # 200W1 APP TOR
Project Name: Castle Mega Store
Address: 406 Evans Black Drive
City, State, Zip: Tukwila,WA,98188
Size: 18,000
Cap Sheet : Polyflex G
Prepared by:
Neisinger, William
Please see the POLYGLASS Technical Guide or contact POLYGLASS Technical Support for further information
regarding slope limitations and specific application requirements a POLYGLASS Torch Applied Roofing System.
This specification is provided as a general guide for use of POLYGLASS products based on typical building conditions
and standard roofing practices. POLYGLASS is strictly a manufacturer of roofing systems and has no experience,
training or expertise in the areas of architecture /engineering or in the area of consulting with respect to matters related
to such areas.
Approved Insulation
(Attached per
Specification)
RECEIVE;
NOV 2;6 2007
PERMIT CENTEi-
PART 1 GENERAL
1.01 General Notes
Preceding the start up of job, the contractor
shall decide to his satisfaction that all the
specifications are workable as specified, that
there is nothing that would deter the
contractor s required warranty, and that no
existing conditions at the site prevent the
contractor from performing the job in a
professional and safe manner. When the job
starts, it will be assumed that the contractor
approves the existing conditions and the
specifications.
1.02 Description
Provide all labor, materials, equipment,
supervision and incidentals as needed to
install a complete Polyglass reinforced
modified bituminous roofing system over a
new or accepted, prepared exiting roof
substrate. All details of installation shall
conform to Polyglass Specifications, Details
and General Recommendations.
1.03 Quality Assurance
Products used in the work of this Section
shall be manufactured by Polyglass or
accepted for use in conjunction with the
products manufactured by Polyglass. The
Roofing Contractor and his personnel shall
be currently accepted by Polyglass as
qualified to install the materials of this
section. Do not apply roofing during
inclement weather. Do not apply roofing
membrane to damp frozen, dirty or dusty
surfaces.
Part 2 PRODUCTS
2.01 Polyglass G2 Base - Asphaltic base sheet
reinforced with a fiberglass mat saturated
and coated with a non - filled Type IV
asphalt which assists in maintaining a
constant thickness on both sides of the
Page 2
sheet and eliminates pinholes. Top surface
of the product is sanded with 2" and 4"
laying lines.
2.02 Polyflex G - Premium, polyester
reinforced APP modified bitumen roofing
membranes specially designed for heat
welded and cold -apply applications.
Membrane is also used as a flashing in all
applicable specifications, in accordance
with recommended installation practices.
Membrane is polyester reinforced,
lightweight, weather resistant and durable.
Top surface of membrane is granular
except at selvage, which is granule free.
2.03 Asphalt Primer Meeting ASTM D 41
specification, applied in strict conformance
to manufacturers recommendations.
2.04 Asphalt Meeting ASTM D 312 Type III or
IV. Follow installation recommendations of
the NRCA (National Roofing Contractors
Association)
2.05 Surface Coating (where required by
specification) emulsion coating, asphalt
latex emulsion roof surfacing material,
asphaltic based aluminum roof coating
(fibrated or non - fibrated) or a colored
acrylic coating, may be required to meet
necessary fire code approvals. Consult
Polyglass Technical Service Department,
1- 800 - 894 -4563 for fire rated assembly
information.
2.06 Product Handling
a. All materials, except those that are shop
fabricated shall be delivered to the job
site with their original labels intact. Bulk
materials shall be identified by the
manufacturer as to specification issued.
b. All materials shall be stored in
accordance with the instructions of the
manufacturer prior to their application or
installation. No wet or damaged materials
will be used in the application. Materials
stored on the job site shall be a minimum
4" off the ground of the roof.
c. Application of all roofing shall be
accomplished in such a way that each
area will be complete at the end of each
RECEIVE
NOV 2 Zoo?
PERMIT CENTEh
days work. All roof edges and incomplete
flashing shall be protected against water
entry, particularly between work periods.
d. When ambient temperature is below 40
degrees F, care must be exercised in
handling and storing Polyglass
membrane. Only rolls for immediate
application shall be exposed to the
elements. All masonry, concrete and
sheet metal surfaces incorporated into the
roof system shall be primed with asphalt
primer meeting ASTM D-41 specification
and allowed to dry prior to installing
bituminous roofing materials.
e. Wood curbs or nailers, where required,
shall be pressure treated with accepted
pressure treatment meeting AWAP
Standard P -5.
Part 3 Execution
3.01 General Preparation
The roof surface, which is to receive the
Polyglass roofing system, shall be smooth,
clean, free from loose gravel, dirt and debris,
dry and structurally sound
3.02 Reroofing
a. Remove existing roof flashings from curbs
and parapet walls down to the surface of
the roof. Remove existing flashings at
roof drains and roof penetrations.
b. Remove all wet, deteriorated, blistered or
delaminated roofing membrane or
insulation and fill in any low spots
occurring as a result of removal work, to
create a smooth even surface for
application of new roof membranes.
c. Existing roof surfaces shall be primed as
necessary with asphalt primer meeting
ASTM D-41 specification and allowed to
dry prior to installing the Polyglass roofing
system.
3.03 Installation
a. Decks Prime where required, in
accordance with requirements and
recommendations of the primer and deck
Page 3
manufacturer (if applicable).
b. Where a vapor retarder is required by
the specifier Follow the instructions with
regard to the particular materials specified
and install in accordance with the
recommendations of the manufacturer
and the requirements of the architect.
3.04 Membrane
a. The corresponding application methods
will appear here
b. For each method selected
3.05 Flashing
a. The flashing shall be installed using
Polyglass flashing sheets and minimum
6" wide Polyglass stripping sheets. The
stripping sheet shall be installed with a
minimum of three inches in both the
horizontal and vertical surfaces. The
flashing sheets shall be installed with a
minimum of six inches on the horizontal
surface and extend a minimum of eight
inches above the finished roof surface.
b. The flashing sheets shall be installed by
the same application method used for the
roof membranes. In hot mop applications
the flashing sheets may be installed by
heat weld application provide the proper
flashing materials are utilized. The top
edge of the flashing sheet shall be
secured using a termination bar (only
when the wall surface above is
waterproofed), or nailed 4" on center and
covered with an acceptable counter
flashing.
c. Items related to reproofing operations
such as sheet metal gravel stops, roof
vents, and similar items shall be
incorporated into the new roof system in
accordance with the recommendations
described in the current issued of the
Polyglass "Specifications and Details"
manual
NOTE: Never use torch or apply torched
materials to areas of combustible materials.
Any combustible material must first be overlaid
with a protective barrier or alternatively remove
such materials from the location. Use common
RECEIV s
NOV 2 6 2007
PERMIT CENTE
sense in the application of torches. Always
keep a suitable, prepared, fire extinguisher
available at each area where torching occurs.
Page 4
RECEIVE!
NOV 2.6 2007
PERMIT CENTE;
ACTIVITY NUMBER: D07 - 430 DATE: 11 -21 -07
PROJECT NAME: CASTLE MEGA STORE
SITE ADDRESS: 405 EVANS BLACK RD
X Original Plan Submittal
Response to Correction Letter #
Response to Incomplete Letter #
Revision # After Permit Issued
DEPARTMENTS:
Buil • ` l !vision
g
Public Works
PERMIT COORD COPY
PLAN REVIEW/ROUTING SLIP
PIA/1/ a
Fire Prevention
DETERMINATION OF COMPLETENESS: (Tues., Thurs.)
Complete
Please Route
Documents/routing slip.doc
2 -28-02
TUES/THURS ROUTING:
REVIEWER'S INITIALS:
Incomplete
Structural Review Required
APPROVALS OR CORRECTIONS:
Approved ❑ Approved with Conditions
Structural ❑ Permit Coordinator X
Planning Division
DUE DATE: 11 -27 -07
Not Applicable
Comments:
Permit Center Use Only
INCOMPLETE LETTER MAILED: LETTER OF COMPLETENESS MAILED:
Departments determined incomplete: Bldg ❑ Fire ❑ Ping ❑ PW ❑ Staff Initials:
❑ No further Review Required
DATE:
DUE DATE: 12-25-07
Not Approved (attach comments) n
Notation:
REVIEWER'S INITIALS: DATE:
n
Permit Center Use Only
CORRECTION LETTER MAILED:
Departments issued corrections: Bldg ❑ Fire ❑ Ping ❑ PW ❑ Staff Initials:
License Information
License
ASSOCRI16206
Licensee Name
ASSOCIATED ROOFING INC
Licensee Type
CONSTRUCTION CONTRACTOR
UBI
600522587
Ind. Ins. Account Id
Business Type
CORPORATION
Address 1
P 0 BOX 82894
Address 2
01/01/1980
City
KENMORE
County
KING
State
WA
Zip
980280894
Phone
2063644445
Status
ACTIVE
Specialty 1
GENERAL
Specialty 2
UNUSED
Effective Date
9/26/1984
Expiration Date
5/6/2008
Suspend Date
Separation Date
Parent Company
Previous License
ASSOCRI 164JD
Next License
Associated License
Business Owner Information
Name
Role
Effective Date
Expiration Date
NEISINGER, WILLIAM P
01/01/1980
NEISINGER, NANCY
01/01/1980
SANDVIG, ROBERTN
01/01/1980
01/01/1980
SANDVIG, VERDA A
01/01/1980
01/01/1980
Look Up a Contractor, Electrician or Plumber License Detail Page 1 of 3
Washington State Department of Labor and Industries
General/Specialty Contractor
A business registered as a construction contractor with L &I to perform
construction work within the scope of its specialty. A General or Specialty
construction Contractor must maintain a surety bond or assignment of
account and carry general liability insurance.
Bond Information
Bond
Bond
Company
Name
Bond
Account
Number
Effective
Date
Expiration
Date
Cancel
Date
Impaired
Date
Bond
Amount
Received
Date
https: // fortress. wa. gov /hii/bbip /printer.aspx ?License= ASSOCRI16206 12/11/2007